* [PATCH v8 01/17] h8300: Assembly headers.
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 7:17 ` Richard Weinberger
` (2 more replies)
2015-04-20 6:13 ` [PATCH v8 02/17] h8300: UAPI headers Yoshinori Sato
` (15 subsequent siblings)
16 siblings, 3 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/include/asm/Kbuild | 66 ++++++
arch/h8300/include/asm/asm-offsets.h | 1 +
arch/h8300/include/asm/atomic.h | 159 +++++++++++++++
arch/h8300/include/asm/bitops.h | 185 +++++++++++++++++
arch/h8300/include/asm/bootparams.h | 17 ++
arch/h8300/include/asm/bug.h | 12 ++
arch/h8300/include/asm/cache.h | 11 +
arch/h8300/include/asm/checksum.h | 102 ++++++++++
arch/h8300/include/asm/cmpxchg.h | 65 ++++++
arch/h8300/include/asm/delay.h | 38 ++++
arch/h8300/include/asm/device.h | 6 +
arch/h8300/include/asm/dma-mapping.h | 124 ++++++++++++
arch/h8300/include/asm/elf.h | 101 ++++++++++
arch/h8300/include/asm/emergency-restart.h | 6 +
arch/h8300/include/asm/flat.h | 27 +++
arch/h8300/include/asm/io.h | 314 +++++++++++++++++++++++++++++
arch/h8300/include/asm/irq.h | 26 +++
arch/h8300/include/asm/irqflags.h | 96 +++++++++
arch/h8300/include/asm/mc146818rtc.h | 9 +
arch/h8300/include/asm/mutex.h | 9 +
arch/h8300/include/asm/page.h | 18 ++
arch/h8300/include/asm/page_offset.h | 2 +
arch/h8300/include/asm/pci.h | 19 ++
arch/h8300/include/asm/pgtable.h | 49 +++++
arch/h8300/include/asm/processor.h | 144 +++++++++++++
arch/h8300/include/asm/ptrace.h | 36 ++++
arch/h8300/include/asm/segment.h | 49 +++++
arch/h8300/include/asm/sh_bios.h | 4 +
arch/h8300/include/asm/signal.h | 22 ++
arch/h8300/include/asm/smp.h | 1 +
arch/h8300/include/asm/spinlock.h | 6 +
arch/h8300/include/asm/string.h | 17 ++
arch/h8300/include/asm/switch_to.h | 51 +++++
arch/h8300/include/asm/syscall.h | 56 +++++
arch/h8300/include/asm/thread_info.h | 119 +++++++++++
arch/h8300/include/asm/timer.h | 31 +++
arch/h8300/include/asm/tlb.h | 8 +
arch/h8300/include/asm/topology.h | 6 +
arch/h8300/include/asm/traps.h | 41 ++++
arch/h8300/include/asm/uaccess.h | 136 +++++++++++++
arch/h8300/include/asm/unaligned.h | 11 +
arch/h8300/include/asm/user.h | 74 +++++++
42 files changed, 2274 insertions(+)
create mode 100644 arch/h8300/include/asm/Kbuild
create mode 100644 arch/h8300/include/asm/asm-offsets.h
create mode 100644 arch/h8300/include/asm/atomic.h
create mode 100644 arch/h8300/include/asm/bitops.h
create mode 100644 arch/h8300/include/asm/bootparams.h
create mode 100644 arch/h8300/include/asm/bug.h
create mode 100644 arch/h8300/include/asm/cache.h
create mode 100644 arch/h8300/include/asm/checksum.h
create mode 100644 arch/h8300/include/asm/cmpxchg.h
create mode 100644 arch/h8300/include/asm/delay.h
create mode 100644 arch/h8300/include/asm/device.h
create mode 100644 arch/h8300/include/asm/dma-mapping.h
create mode 100644 arch/h8300/include/asm/elf.h
create mode 100644 arch/h8300/include/asm/emergency-restart.h
create mode 100644 arch/h8300/include/asm/flat.h
create mode 100644 arch/h8300/include/asm/io.h
create mode 100644 arch/h8300/include/asm/irq.h
create mode 100644 arch/h8300/include/asm/irqflags.h
create mode 100644 arch/h8300/include/asm/mc146818rtc.h
create mode 100644 arch/h8300/include/asm/mutex.h
create mode 100644 arch/h8300/include/asm/page.h
create mode 100644 arch/h8300/include/asm/page_offset.h
create mode 100644 arch/h8300/include/asm/pci.h
create mode 100644 arch/h8300/include/asm/pgtable.h
create mode 100644 arch/h8300/include/asm/processor.h
create mode 100644 arch/h8300/include/asm/ptrace.h
create mode 100644 arch/h8300/include/asm/segment.h
create mode 100644 arch/h8300/include/asm/sh_bios.h
create mode 100644 arch/h8300/include/asm/signal.h
create mode 100644 arch/h8300/include/asm/smp.h
create mode 100644 arch/h8300/include/asm/spinlock.h
create mode 100644 arch/h8300/include/asm/string.h
create mode 100644 arch/h8300/include/asm/switch_to.h
create mode 100644 arch/h8300/include/asm/syscall.h
create mode 100644 arch/h8300/include/asm/thread_info.h
create mode 100644 arch/h8300/include/asm/timer.h
create mode 100644 arch/h8300/include/asm/tlb.h
create mode 100644 arch/h8300/include/asm/topology.h
create mode 100644 arch/h8300/include/asm/traps.h
create mode 100644 arch/h8300/include/asm/uaccess.h
create mode 100644 arch/h8300/include/asm/unaligned.h
create mode 100644 arch/h8300/include/asm/user.h
diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild
new file mode 100644
index 0000000..9e9f4f3
--- /dev/null
+++ b/arch/h8300/include/asm/Kbuild
@@ -0,0 +1,66 @@
+generic-y += barrier.h
+generic-y += bitsperlong.h
+generic-y += bugs.h
+generic-y += cacheflush.h
+generic-y += clkdev.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += div64.h
+generic-y += dma.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += exec.h
+generic-y += fb.h
+generic-y += fcntl.h
+generic-y += ftrace.h
+generic-y += futex.h
+generic-y += hardirq.h
+generic-y += hash.h
+generic-y += hw_irq.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += irq_work.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += kvm_para.h
+generic-y += linkage.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += mcs_spinlock.h
+generic-y += mman.h
+generic-y += mmu.h
+generic-y += mmu_context.h
+generic-y += module.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += pgalloc.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += preempt.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += siginfo.h
+generic-y += sizes.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += timex.h
+generic-y += tlbflush.h
+generic-y += trace_clock.h
+generic-y += types.h
+generic-y += ucontext.h
+generic-y += vga.h
+generic-y += xor.h
diff --git a/arch/h8300/include/asm/asm-offsets.h b/arch/h8300/include/asm/asm-offsets.h
new file mode 100644
index 0000000..d370ee3
--- /dev/null
+++ b/arch/h8300/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/arch/h8300/include/asm/atomic.h b/arch/h8300/include/asm/atomic.h
new file mode 100644
index 0000000..7ca73f8
--- /dev/null
+++ b/arch/h8300/include/asm/atomic.h
@@ -0,0 +1,159 @@
+#ifndef __ARCH_H8300_ATOMIC__
+#define __ARCH_H8300_ATOMIC__
+
+#include <linux/types.h>
+#include <asm/cmpxchg.h>
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ */
+
+#define ATOMIC_INIT(i) { (i) }
+
+#define atomic_read(v) ACCESS_ONCE((v)->counter)
+#define atomic_set(v, i) (((v)->counter) = i)
+
+#include <linux/kernel.h>
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ h8300flags flags;
+ int ret;
+
+ flags = arch_local_irq_save();
+ ret = v->counter += i;
+ arch_local_irq_restore(flags);
+ return ret;
+}
+
+#define atomic_add(i, v) atomic_add_return(i, v)
+#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ h8300flags flags;
+ int ret;
+
+ flags = arch_local_irq_save();
+ ret = v->counter -= i;
+ arch_local_irq_restore(flags);
+ return ret;
+}
+
+#define atomic_sub(i, v) atomic_sub_return(i, v)
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+static inline int atomic_inc_return(atomic_t *v)
+{
+ h8300flags flags;
+ int ret;
+
+ flags = arch_local_irq_save();
+ v->counter++;
+ ret = v->counter;
+ arch_local_irq_restore(flags);
+ return ret;
+}
+
+#define atomic_inc(v) atomic_inc_return(v)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+static inline int atomic_dec_return(atomic_t *v)
+{
+ h8300flags flags;
+ int ret;
+
+ flags = arch_local_irq_save();
+ --v->counter;
+ ret = v->counter;
+ arch_local_irq_restore(flags);
+ return ret;
+}
+
+#define atomic_dec(v) atomic_dec_return(v)
+
+static inline int atomic_dec_and_test(atomic_t *v)
+{
+ h8300flags flags;
+ int ret;
+
+ flags = arch_local_irq_save();
+ --v->counter;
+ ret = v->counter;
+ arch_local_irq_restore(flags);
+ return ret == 0;
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ int ret;
+ h8300flags flags;
+
+ flags = arch_local_irq_save();
+ ret = v->counter;
+ if (likely(ret == old))
+ v->counter = new;
+ arch_local_irq_restore(flags);
+ return ret;
+}
+
+static inline int __atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int ret;
+ h8300flags flags;
+
+ flags = arch_local_irq_save();
+ ret = v->counter;
+ if (ret != u)
+ v->counter += a;
+ arch_local_irq_restore(flags);
+ return ret;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+ unsigned char ccr;
+ unsigned long tmp;
+
+ __asm__ __volatile__("stc ccr,%w3\n\t"
+ "orc #0x80,ccr\n\t"
+ "mov.l %0,%1\n\t"
+ "and.l %2,%1\n\t"
+ "mov.l %1,%0\n\t"
+ "ldc %w3,ccr"
+ : "=m"(*v), "=r"(tmp)
+ : "g"(~(mask)), "r"(ccr));
+}
+
+static inline void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+ unsigned char ccr;
+ unsigned long tmp;
+
+ __asm__ __volatile__("stc ccr,%w3\n\t"
+ "orc #0x80,ccr\n\t"
+ "mov.l %0,%1\n\t"
+ "or.l %2,%1\n\t"
+ "mov.l %1,%0\n\t"
+ "ldc %w3,ccr"
+ : "=m"(*v), "=r"(tmp)
+ : "g"(~(mask)), "r"(ccr));
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#endif /* __ARCH_H8300_ATOMIC __ */
diff --git a/arch/h8300/include/asm/bitops.h b/arch/h8300/include/asm/bitops.h
new file mode 100644
index 0000000..05999ab
--- /dev/null
+++ b/arch/h8300/include/asm/bitops.h
@@ -0,0 +1,185 @@
+#ifndef _H8300_BITOPS_H
+#define _H8300_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ * Copyright 2002, Yoshinori Sato
+ */
+
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+/*
+ * Function prototypes to keep gcc -Wall happy
+ */
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+ unsigned long result;
+
+ result = -1;
+ __asm__("1:\n\t"
+ "shlr.l %2\n\t"
+ "adds #1,%0\n\t"
+ "bcs 1b"
+ : "=r"(result)
+ : "0"(result), "r"(word));
+ return result;
+}
+
+#define H8300_GEN_BITOP(FNAME, OP) \
+static inline void FNAME(int nr, volatile unsigned long *addr) \
+{ \
+ unsigned char *b_addr; \
+ unsigned char bit = nr & 7; \
+ \
+ b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3); \
+ if (__builtin_constant_p(nr)) { \
+ __asm__(OP " %1,%0" : "+WU"(*b_addr) : "i"(nr & 7)); \
+ } else { \
+ __asm__(OP " %s1,%0" : "+WU"(*b_addr) : "r"(bit)); \
+ } \
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+H8300_GEN_BITOP(set_bit, "bset")
+H8300_GEN_BITOP(clear_bit, "bclr")
+H8300_GEN_BITOP(change_bit, "bnot")
+#define __set_bit(nr, addr) set_bit((nr), (addr))
+#define __clear_bit(nr, addr) clear_bit((nr), (addr))
+#define __change_bit(nr, addr) change_bit((nr), (addr))
+
+#undef H8300_GEN_BITOP
+
+static inline int test_bit(int nr, const unsigned long *addr)
+{
+ int ret = 0;
+ unsigned char *b_addr;
+ unsigned char bit = nr & 7;
+
+ b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3);
+ if (__builtin_constant_p(nr)) {
+ __asm__("bld %Z2,%1\n\t"
+ "rotxl %0\n\t"
+ : "=r"(ret)
+ : "WU"(*b_addr), "i"(nr & 7), "0"(ret) : "cc");
+ } else {
+ __asm__("btst %w2,%1\n\t"
+ "beq 1f\n\t"
+ "inc.l #1,%0\n"
+ "1:"
+ : "=r"(ret)
+ : "WU"(*b_addr), "r"(bit), "0"(ret) : "cc");
+ }
+ return ret;
+}
+
+#define __test_bit(nr, addr) test_bit(nr, addr)
+
+#define H8300_GEN_TEST_BITOP(FNNAME, OP) \
+static inline int FNNAME(int nr, void *addr) \
+{ \
+ int retval = 0; \
+ char ccrsave; \
+ unsigned char *b_addr; \
+ unsigned char bit = nr & 7; \
+ \
+ b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3); \
+ if (__builtin_constant_p(nr)) { \
+ __asm__("stc ccr,%s2\n\t" \
+ "orc #0x80,ccr\n\t" \
+ "bld %4,%1\n\t" \
+ OP " %4,%1\n\t" \
+ "rotxl.l %0\n\t" \
+ "ldc %s2,ccr" \
+ : "=r"(retval), "+WU" (*b_addr), "=&r"(ccrsave) \
+ : "0"(retval), "i"(nr & 7) : "cc"); \
+ } else { \
+ __asm__("stc ccr,%t3\n\t" \
+ "orc #0x80,ccr\n\t" \
+ "btst %s3,%1\n\t" \
+ OP " %s3,%1\n\t" \
+ "beq 1f\n\t" \
+ "inc.l #1,%0\n\t" \
+ "1:\n" \
+ "ldc %t3,ccr" \
+ : "=r"(retval), "+WU" (*b_addr) \
+ : "0" (retval), "r"(bit) : "cc"); \
+ } \
+ return retval; \
+} \
+ \
+static inline int __ ## FNNAME(int nr, void *addr) \
+{ \
+ int retval = 0; \
+ unsigned char *b_addr; \
+ unsigned char bit = nr & 7; \
+ \
+ b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3); \
+ if (__builtin_constant_p(nr)) { \
+ __asm__("bld %3,%1\n\t" \
+ OP " %3,%1\n\t" \
+ "rotxl.l %0\n\t" \
+ : "=r"(retval), "+WU"(*b_addr) \
+ : "0" (retval), "i"(nr & 7)); \
+ } else { \
+ __asm__("btst %s3,%1\n\t" \
+ OP " %s3,%1\n\t" \
+ "beq 1f\n\t" \
+ "inc.l #1,%0\n\t" \
+ "1:" \
+ : "=r"(retval), "+WU"(*b_addr) \
+ : "0" (retval), "r"(bit)); \
+ } \
+ return retval; \
+}
+
+H8300_GEN_TEST_BITOP(test_and_set_bit, "bset")
+H8300_GEN_TEST_BITOP(test_and_clear_bit, "bclr")
+H8300_GEN_TEST_BITOP(test_and_change_bit, "bnot")
+#undef H8300_GEN_TEST_BITOP
+
+#include <asm-generic/bitops/ffs.h>
+
+static inline unsigned long __ffs(unsigned long word)
+{
+ unsigned long result;
+
+ result = -1;
+ __asm__("1:\n\t"
+ "shlr.l %2\n\t"
+ "adds #1,%0\n\t"
+ "bcc 1b"
+ : "=r" (result)
+ : "0"(result), "r"(word));
+ return result;
+}
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/le.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* _H8300_BITOPS_H */
diff --git a/arch/h8300/include/asm/bootparams.h b/arch/h8300/include/asm/bootparams.h
new file mode 100644
index 0000000..6c0b145
--- /dev/null
+++ b/arch/h8300/include/asm/bootparams.h
@@ -0,0 +1,17 @@
+/*
+H8/300 kernel boot parameters
+*/
+
+#ifndef __ASM_H8300_BOOTPARAMS__
+#define __ASM_H8300_BOOTPARAMS__
+
+struct bootparams {
+ short size;
+ unsigned char gpio_ddr[24];
+ unsigned char gpio_use[24];
+ unsigned int clock_freq;
+ unsigned int ram_end;
+ unsigned char *command_line;
+} __packed __aligned(2);
+
+#endif
diff --git a/arch/h8300/include/asm/bug.h b/arch/h8300/include/asm/bug.h
new file mode 100644
index 0000000..1e1be81
--- /dev/null
+++ b/arch/h8300/include/asm/bug.h
@@ -0,0 +1,12 @@
+#ifndef _H8300_BUG_H
+#define _H8300_BUG_H
+
+/* always true */
+#define is_valid_bugaddr(addr) (1)
+
+#include <asm-generic/bug.h>
+
+struct pt_regs;
+extern void die(const char *str, struct pt_regs *fp, unsigned long err);
+
+#endif
diff --git a/arch/h8300/include/asm/cache.h b/arch/h8300/include/asm/cache.h
new file mode 100644
index 0000000..0ef1edc
--- /dev/null
+++ b/arch/h8300/include/asm/cache.h
@@ -0,0 +1,11 @@
+#ifndef __ARCH_H8300_CACHE_H
+#define __ARCH_H8300_CACHE_H
+
+/* bytes per L1 cache line */
+#define L1_CACHE_SHIFT 2
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif
diff --git a/arch/h8300/include/asm/checksum.h b/arch/h8300/include/asm/checksum.h
new file mode 100644
index 0000000..59e2adc9
--- /dev/null
+++ b/arch/h8300/include/asm/checksum.h
@@ -0,0 +1,102 @@
+#ifndef _H8300_CHECKSUM_H
+#define _H8300_CHECKSUM_H
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum sum, int *csum_err);
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+
+/*
+ * Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ __asm__("add.w %e0,%f0\n\t"
+ "xor.w %e0,%e0\n\t"
+ "rotxl.w %e0\n\t"
+ "add.w %e0,%f0\n\t"
+ "sub.w %e0,%e0\n\t"
+ : "=r"(sum)
+ : "0"(sum));
+ return (__force __sum16)~sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ int tmp;
+
+ __asm__ ("sub.l %1,%1\n\t"
+ "add.l %3,%0\n\t"
+ "addx #0,%w1\n\t"
+ "add.l %4,%0\n\t"
+ "addx #0,%w1\n\t"
+ "add.l %5,%0\n\t"
+ "addx #0,%w1\n\t"
+ "add.l %1,%0\n\t"
+ "bcc 1f\n\t"
+ "inc.l #1,%0\n"
+ "1:"
+ : "=&r" (sum), "=&r"(tmp)
+ : "0" (sum), "1" (daddr),
+ "r" (saddr), "r" (len + proto));
+ return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#endif /* _H8300_CHECKSUM_H */
diff --git a/arch/h8300/include/asm/cmpxchg.h b/arch/h8300/include/asm/cmpxchg.h
new file mode 100644
index 0000000..95fec4c
--- /dev/null
+++ b/arch/h8300/include/asm/cmpxchg.h
@@ -0,0 +1,65 @@
+#ifndef __ARCH_H8300_CMPXCHG__
+#define __ARCH_H8300_CMPXCHG__
+
+#include <linux/irqflags.h>
+
+#define xchg(ptr, x) \
+ ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), \
+ sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+static inline unsigned long __xchg(unsigned long x,
+ volatile void *ptr, int size)
+{
+ unsigned long tmp, flags;
+
+ local_irq_save(flags);
+
+ switch (size) {
+ case 1:
+ __asm__ __volatile__
+ ("mov.b %2,%0\n\t"
+ "mov.b %1,%2"
+ : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)));
+ break;
+ case 2:
+ __asm__ __volatile__
+ ("mov.w %2,%0\n\t"
+ "mov.w %1,%2"
+ : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)));
+ break;
+ case 4:
+ __asm__ __volatile__
+ ("mov.l %2,%0\n\t"
+ "mov.l %1,%2"
+ : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)));
+ break;
+ default:
+ tmp = 0;
+ }
+ local_irq_restore(flags);
+ return tmp;
+}
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+#endif /* __ARCH_H8300_CMPXCHG__ */
diff --git a/arch/h8300/include/asm/delay.h b/arch/h8300/include/asm/delay.h
new file mode 100644
index 0000000..2bdde59
--- /dev/null
+++ b/arch/h8300/include/asm/delay.h
@@ -0,0 +1,38 @@
+#ifndef _H8300_DELAY_H
+#define _H8300_DELAY_H
+
+#include <asm/param.h>
+
+/*
+ * Copyright (C) 2002 Yoshinori Sato <ysato@sourceforge.jp>
+ *
+ * Delay routines, using a pre-computed "loops_per_second" value.
+ */
+
+static inline void __delay(unsigned long loops)
+{
+ __asm__ __volatile__ ("1:\n\t"
+ "dec.l #1,%0\n\t"
+ "bne 1b"
+ : "=r" (loops) : "0"(loops));
+}
+
+/*
+ * Use only for very small delays ( < 1 msec). Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays. This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+extern unsigned long loops_per_jiffy;
+
+static inline void udelay(unsigned long usecs)
+{
+ usecs *= 4295; /* 2**32 / 1000000 */
+ usecs /= (loops_per_jiffy*HZ);
+ if (usecs)
+ __delay(usecs);
+}
+
+#endif /* _H8300_DELAY_H */
diff --git a/arch/h8300/include/asm/device.h b/arch/h8300/include/asm/device.h
new file mode 100644
index 0000000..06746c5
--- /dev/null
+++ b/arch/h8300/include/asm/device.h
@@ -0,0 +1,6 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
diff --git a/arch/h8300/include/asm/dma-mapping.h b/arch/h8300/include/asm/dma-mapping.h
new file mode 100644
index 0000000..f6f4716
--- /dev/null
+++ b/arch/h8300/include/asm/dma-mapping.h
@@ -0,0 +1,124 @@
+#ifndef _H8300_DMA_MAPPING_H
+#define _H8300_DMA_MAPPING_H
+
+struct scatterlist;
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+ return 1;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+ return 0;
+}
+
+extern void *dma_alloc_coherent(struct device *, size_t,
+ dma_addr_t *, gfp_t);
+extern void dma_free_coherent(struct device *, size_t,
+ void *, dma_addr_t);
+
+static inline void *dma_alloc_attrs(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag,
+ struct dma_attrs *attrs)
+{
+ /* attrs is not supported and ignored */
+ return dma_alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_attrs(struct device *dev, size_t size,
+ void *cpu_addr, dma_addr_t dma_handle,
+ struct dma_attrs *attrs)
+{
+ /* attrs is not supported and ignored */
+ dma_free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
+ dma_addr_t *handle, gfp_t flag)
+{
+ return dma_alloc_coherent(dev, size, handle, flag);
+}
+static inline void dma_free_noncoherent(struct device *dev, size_t size,
+ void *addr, dma_addr_t handle)
+{
+ dma_free_coherent(dev, size, addr, handle);
+}
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ /* we use coherent allocation, so not much to do here. */
+}
+
+extern dma_addr_t dma_map_single(struct device *, void *, size_t,
+ enum dma_data_direction);
+static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
+ size_t size, enum dma_data_direction dir)
+{
+}
+
+extern dma_addr_t dma_map_page(struct device *, struct page *,
+ unsigned long, size_t size,
+ enum dma_data_direction);
+static inline void dma_unmap_page(struct device *dev, dma_addr_t address,
+ size_t size, enum dma_data_direction dir)
+{
+}
+
+extern int dma_map_sg(struct device *, struct scatterlist *, int,
+ enum dma_data_direction);
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nhwentries, enum dma_data_direction dir)
+{
+}
+
+extern void dma_sync_single_for_device(struct device *, dma_addr_t, size_t,
+ enum dma_data_direction);
+extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
+ enum dma_data_direction);
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ /* just sync everything for now */
+ dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+ dma_addr_t handle,
+ size_t size,
+ enum dma_data_direction dir)
+{
+}
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+ struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ /* just sync everything for now */
+ dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t handle)
+{
+ return 0;
+}
+
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
+#endif
diff --git a/arch/h8300/include/asm/elf.h b/arch/h8300/include/asm/elf.h
new file mode 100644
index 0000000..09031d0
--- /dev/null
+++ b/arch/h8300/include/asm/elf.h
@@ -0,0 +1,101 @@
+#ifndef __ASM_H8300_ELF_H
+#define __ASM_H8300_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+typedef unsigned long elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+#define ELF_ARCH EM_H8_300
+#if defined(CONFIG_CPU_H8300H)
+#define ELF_CORE_EFLAGS 0x810000
+#endif
+#if defined(CONFIG_CPU_H8S)
+#define ELF_CORE_EFLAGS 0x820000
+#endif
+
+#define ELF_PLAT_INIT(_r) do { (_r)->er1 = 0; } while (0)
+
+#define ELF_EXEC_PAGESIZE 4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE 0xD0000000UL
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM (NULL)
+
+#define R_H8_NONE 0
+#define R_H8_DIR32 1
+#define R_H8_DIR32_28 2
+#define R_H8_DIR32_24 3
+#define R_H8_DIR32_16 4
+#define R_H8_DIR32U 6
+#define R_H8_DIR32U_28 7
+#define R_H8_DIR32U_24 8
+#define R_H8_DIR32U_20 9
+#define R_H8_DIR32U_16 10
+#define R_H8_DIR24 11
+#define R_H8_DIR24_20 12
+#define R_H8_DIR24_16 13
+#define R_H8_DIR24U 14
+#define R_H8_DIR24U_20 15
+#define R_H8_DIR24U_16 16
+#define R_H8_DIR16 17
+#define R_H8_DIR16U 18
+#define R_H8_DIR16S_32 19
+#define R_H8_DIR16S_28 20
+#define R_H8_DIR16S_24 21
+#define R_H8_DIR16S_20 22
+#define R_H8_DIR16S 23
+#define R_H8_DIR8 24
+#define R_H8_DIR8U 25
+#define R_H8_DIR8Z_32 26
+#define R_H8_DIR8Z_28 27
+#define R_H8_DIR8Z_24 28
+#define R_H8_DIR8Z_20 29
+#define R_H8_DIR8Z_16 30
+#define R_H8_PCREL16 31
+#define R_H8_PCREL8 32
+#define R_H8_BPOS 33
+#define R_H8_PCREL32 34
+#define R_H8_GOT32O 35
+#define R_H8_GOT16O 36
+#define R_H8_DIR16A8 59
+#define R_H8_DIR16R8 60
+#define R_H8_DIR24A8 61
+#define R_H8_DIR24R8 62
+#define R_H8_DIR32A16 63
+#define R_H8_ABS32 65
+#define R_H8_ABS32A16 127
+
+#endif
diff --git a/arch/h8300/include/asm/emergency-restart.h b/arch/h8300/include/asm/emergency-restart.h
new file mode 100644
index 0000000..108d8c4
--- /dev/null
+++ b/arch/h8300/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h
new file mode 100644
index 0000000..9ff092e
--- /dev/null
+++ b/arch/h8300/include/asm/flat.h
@@ -0,0 +1,27 @@
+/*
+ * arch/h8300/asm/include/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __H8300_FLAT_H__
+#define __H8300_FLAT_H__
+
+#define flat_argvp_envp_on_stack() 1
+#define flat_old_ram_flag(flags) 1
+#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
+#define flat_set_persistent(relval, p) 0
+
+/*
+ * on the H8 a couple of the relocations have an instruction in the
+ * top byte. As there can only be 24bits of address space, we just
+ * always preserve that 8bits at the top, when it isn't an instruction
+ * is is 0 (davidm@snapgear.com)
+ */
+
+#define flat_get_relocate_addr(rel) (rel & ~0x00000001)
+#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
+ (get_unaligned(rp) & (((flags) & FLAT_FLAG_GOTPIC) ? \
+ 0xffffffff : 0x00ffffff))
+#define flat_put_addr_at_rp(rp, addr, rel) \
+ put_unaligned(((*(char *)(rp)) << 24) | ((addr) & 0x00ffffff), (rp))
+
+#endif /* __H8300_FLAT_H__ */
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
new file mode 100644
index 0000000..51ee096
--- /dev/null
+++ b/arch/h8300/include/asm/io.h
@@ -0,0 +1,314 @@
+#ifndef _H8300_IO_H
+#define _H8300_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+
+#define __raw_readb(addr) ({ u8 __v = *(volatile u8 *)(addr); __v; })
+
+#define __raw_readw(addr) ({ u16 __v = *(volatile u16 *)(addr); __v; })
+
+#define __raw_readl(addr) ({ u32 __v = *(volatile u32 *)(addr); __v; })
+
+#define __raw_writeb(b, addr) (void)((*(volatile u8 *)(addr)) = (b))
+
+#define __raw_writew(b, addr) (void)((*(volatile u16 *)(addr)) = (b))
+
+#define __raw_writel(b, addr) (void)((*(volatile u32 *)(addr)) = (b))
+
+#define readb __raw_readb
+#define readw __raw_readw
+#define readl __raw_readl
+#define writeb __raw_writeb
+#define writew __raw_writew
+#define writel __raw_writel
+
+#if defined(CONFIG_H83069)
+#define ABWCR 0xFEE020
+#elif defined(CONFIG_H8S2678)
+#define ABWCR 0xFFFEC0
+#endif
+
+#ifdef CONFIG_H8300_BUBSSWAP
+#define _swapw(x) __builtin_bswap16(x)
+#define _swapl(x) __builtin_bswap32(x)
+#else
+#define _swapw(x) (x)
+#define _swapl(x) (x)
+#endif
+
+static inline int h8300_buswidth(unsigned int addr)
+{
+ return (*(volatile u8 *)ABWCR & (1 << ((addr >> 21) & 7))) == 0;
+}
+
+static inline void io_outsb(unsigned int addr, const void *buf, int len)
+{
+ volatile unsigned char *ap_b = (volatile unsigned char *) addr;
+ volatile unsigned short *ap_w = (volatile unsigned short *) addr;
+ unsigned char *bp = (unsigned char *) buf;
+
+ if (h8300_buswidth(addr) && (addr & 1)) {
+ while (len--)
+ *ap_w = *bp++;
+ } else {
+ while (len--)
+ *ap_b = *bp++;
+ }
+}
+
+static inline void io_outsw(unsigned int addr, const void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+
+ while (len--)
+ *ap = _swapw(*bp++);
+}
+
+static inline void io_outsl(unsigned int addr, const void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+
+ while (len--) {
+ *(ap + 1) = _swapw(*(bp + 0));
+ *(ap + 0) = _swapw(*(bp + 1));
+ bp += 2;
+ }
+}
+
+static inline void io_outsw_noswap(unsigned int addr, const void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+
+ while (len--)
+ *ap = *bp++;
+}
+
+static inline void io_outsl_noswap(unsigned int addr, const void *buf, int len)
+{
+ volatile unsigned long *ap = (volatile unsigned long *) addr;
+ unsigned long *bp = (unsigned long *) buf;
+
+ while (len--)
+ *ap = *bp++;
+}
+
+static inline void io_insb(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned char *ap_b;
+ volatile unsigned short *ap_w;
+ unsigned char *bp = (unsigned char *) buf;
+
+ if (h8300_buswidth(addr)) {
+ ap_w = (volatile unsigned short *)(addr & ~1);
+ while (len--)
+ *bp++ = *ap_w & 0xff;
+ } else {
+ ap_b = (volatile unsigned char *)addr;
+ while (len--)
+ *bp++ = *ap_b;
+ }
+}
+
+static inline void io_insw(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+
+ while (len--)
+ *bp++ = _swapw(*ap);
+}
+
+static inline void io_insl(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+
+ while (len--) {
+ *(bp + 0) = _swapw(*(ap + 1));
+ *(bp + 1) = _swapw(*(ap + 0));
+ bp += 2;
+ }
+}
+
+static inline void io_insw_noswap(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned short *ap = (volatile unsigned short *) addr;
+ unsigned short *bp = (unsigned short *) buf;
+
+ while (len--)
+ *bp++ = *ap;
+}
+
+static inline void io_insl_noswap(unsigned int addr, void *buf, int len)
+{
+ volatile unsigned long *ap = (volatile unsigned long *) addr;
+ unsigned long *bp = (unsigned long *) buf;
+
+ while (len--)
+ *bp++ = *ap;
+}
+
+/*
+ * make the short names macros so specific devices
+ * can override them as required
+ */
+
+#define memset_io(a, b, c) memset((void *)(a), (b), (c))
+#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
+#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
+
+#define mmiowb()
+
+#define inb(addr) ((h8300_buswidth(addr)) ? \
+ __raw_readw((addr) & ~1) & 0xff:__raw_readb(addr))
+#define inw(addr) _swapw(__raw_readw(addr))
+#define inl(addr) (_swapw(__raw_readw(addr) << 16 | \
+ _swapw(__raw_readw(addr + 2))))
+#define outb(x, addr) ((void)((h8300_buswidth(addr) && ((addr) & 1)) ? \
+ __raw_writeb(x, (addr) & ~1) : \
+ __raw_writeb(x, addr)))
+#define outw(x, addr) ((void) __raw_writew(_swapw(x), addr))
+#define outl(x, addr) \
+ ((void) __raw_writel(_swapw(x & 0xffff) | \
+ _swapw(x >> 16) << 16, addr))
+
+#define inb_p(addr) inb(addr)
+#define inw_p(addr) inw(addr)
+#define inl_p(addr) inl(addr)
+#define outb_p(x, addr) outb(x, addr)
+#define outw_p(x, addr) outw(x, addr)
+#define outl_p(x, addr) outl(x, addr)
+
+#define outsb(a, b, l) io_outsb(a, b, l)
+#define outsw(a, b, l) io_outsw(a, b, l)
+#define outsl(a, b, l) io_outsl(a, b, l)
+
+#define insb(a, b, l) io_insb(a, b, l)
+#define insw(a, b, l) io_insw(a, b, l)
+#define insl(a, b, l) io_insl(a, b, l)
+
+#define ioread8(a) __raw_readb(a)
+#define ioread16(a) __raw_readw(a)
+#define ioread32(a) __raw_readl(a)
+
+#define iowrite8(v, a) __raw_writeb((v), (a))
+#define iowrite16(v, a) __raw_writew((v), (a))
+#define iowrite32(v, a) __raw_writel((v), (a))
+
+#define ioread8_rep(p, d, c) insb(p, d, c)
+#define ioread16_rep(p, d, c) insw(p, d, c)
+#define ioread32_rep(p, d, c) insl(p, d, c)
+#define iowrite8_rep(p, s, c) outsb(p, s, c)
+#define iowrite16_rep(p, s, c) outsw(p, s, c)
+#define iowrite32_rep(p, s, c) outsl(p, s, c)
+
+#define IO_SPACE_LIMIT 0xffffff
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING 0
+#define IOMAP_NOCACHE_SER 1
+#define IOMAP_NOCACHE_NONSER 2
+#define IOMAP_WRITETHROUGH 3
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size,
+ int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+static inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_nocache(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_writethrough(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void *ioremap_fullcache(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void *addr);
+
+#define ioremap_wc ioremap_nocache
+
+/* H8/300 internal I/O functions */
+static inline unsigned char ctrl_inb(unsigned long addr)
+{
+ return *(volatile unsigned char *)addr;
+}
+
+static inline unsigned short ctrl_inw(unsigned long addr)
+{
+ return *(volatile unsigned short *)addr;
+}
+
+static inline unsigned long ctrl_inl(unsigned long addr)
+{
+ return *(volatile unsigned long *)addr;
+}
+
+static inline void ctrl_outb(unsigned char b, unsigned long addr)
+{
+ *(volatile unsigned char *)addr = b;
+}
+
+static inline void ctrl_outw(unsigned short b, unsigned long addr)
+{
+ *(volatile unsigned short *)addr = b;
+}
+
+static inline void ctrl_outl(unsigned long b, unsigned long addr)
+{
+ *(volatile unsigned long *)addr = b;
+}
+
+static inline void ctrl_bclr(int b, unsigned long addr)
+{
+ if (__builtin_constant_p(b))
+ __asm__("bclr %1,%0" : : "WU"(addr), "i"(b));
+ else
+ __asm__("bclr %w1,%0" : : "WU"(addr), "r"(b));
+}
+
+static inline void ctrl_bset(int b, unsigned long addr)
+{
+ if (__builtin_constant_p(b))
+ __asm__("bset %1,%0" : : "WU"(addr), "i"(b));
+ else
+ __asm__("bset %w1,%0" : : "WU"(addr), "r"(b));
+}
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+#define phys_to_virt(vaddr) ((void *) (vaddr))
+#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) (p)
+
+#endif /* __KERNEL__ */
+
+#endif /* _H8300_IO_H */
diff --git a/arch/h8300/include/asm/irq.h b/arch/h8300/include/asm/irq.h
new file mode 100644
index 0000000..69f23f0
--- /dev/null
+++ b/arch/h8300/include/asm/irq.h
@@ -0,0 +1,26 @@
+#ifndef _H8300_IRQ_H_
+#define _H8300_IRQ_H_
+
+#include <linux/irqchip.h>
+
+#if defined(CONFIG_CPU_H8300H)
+#define NR_IRQS 64
+#define IRQ_CHIP h8300h_irq_chip
+#define EXT_IRQ0 12
+#define EXT_IRQS 6
+#elif defined(CONFIG_CPU_H8S)
+#define NR_IRQS 128
+#define IRQ_CHIP h8s_irq_chip
+#define EXT_IRQ0 16
+#define EXT_IRQS 16
+#endif
+
+static inline int irq_canonicalize(int irq)
+{
+ return irq;
+}
+
+void h8300_init_ipr(void);
+extern struct irq_chip h8300h_irq_chip;
+extern struct irq_chip h8s_irq_chip;
+#endif /* _H8300_IRQ_H_ */
diff --git a/arch/h8300/include/asm/irqflags.h b/arch/h8300/include/asm/irqflags.h
new file mode 100644
index 0000000..5e1e324
--- /dev/null
+++ b/arch/h8300/include/asm/irqflags.h
@@ -0,0 +1,96 @@
+#ifndef _H8300_IRQFLAGS_H
+#define _H8300_IRQFLAGS_H
+
+#ifdef CONFIG_CPU_H8300H
+typedef unsigned char h8300flags;
+
+static inline h8300flags arch_local_save_flags(void)
+{
+ h8300flags flags;
+
+ __asm__ volatile ("stc ccr,%w0" : "=r" (flags));
+ return flags;
+}
+
+static inline void arch_local_irq_disable(void)
+{
+ __asm__ volatile ("orc #0xc0,ccr");
+}
+
+static inline void arch_local_irq_enable(void)
+{
+ __asm__ volatile ("andc #0x3f,ccr");
+}
+
+static inline h8300flags arch_local_irq_save(void)
+{
+ h8300flags flags;
+
+ __asm__ volatile ("stc ccr,%w0\n\t"
+ "orc #0xc0,ccr" : "=r" (flags));
+ return flags;
+}
+
+static inline void arch_local_irq_restore(h8300flags flags)
+{
+ __asm__ volatile ("ldc %w0,ccr" : : "r" (flags) : "cc");
+}
+
+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+ return (flags & 0xc0) == 0xc0;
+}
+#endif
+#ifdef CONFIG_CPU_H8S
+typedef unsigned short h8300flags;
+
+static inline h8300flags arch_local_save_flags(void)
+{
+ h8300flags flags;
+
+ __asm__ volatile ("stc ccr,%w0\n\tstc exr,%x0" : "=r" (flags));
+ return flags;
+}
+
+static inline void arch_local_irq_disable(void)
+{
+ __asm__ volatile ("orc #0x80,ccr\n\t");
+}
+
+static inline void arch_local_irq_enable(void)
+{
+ __asm__ volatile ("andc #0x7f,ccr\n\t"
+ "andc #0xf0,exr\n\t");
+}
+
+static inline h8300flags arch_local_irq_save(void)
+{
+ h8300flags flags;
+
+ __asm__ volatile ("stc ccr,%w0\n\t"
+ "stc exr,%x0\n\t"
+ "orc #0x80,ccr\n\t"
+ : "=r" (flags));
+ return flags;
+}
+
+static inline void arch_local_irq_restore(h8300flags flags)
+{
+ __asm__ volatile ("ldc %w0,ccr\n\t"
+ "ldc %x0,exr"
+ : : "r" (flags) : "cc");
+}
+
+static inline int arch_irqs_disabled_flags(h8300flags flags)
+{
+ return (flags & 0x0080) == 0x0080;
+}
+
+#endif
+
+static inline int arch_irqs_disabled(void)
+{
+ return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+
+#endif /* _H8300_IRQFLAGS_H */
diff --git a/arch/h8300/include/asm/mc146818rtc.h b/arch/h8300/include/asm/mc146818rtc.h
new file mode 100644
index 0000000..ab9d964
--- /dev/null
+++ b/arch/h8300/include/asm/mc146818rtc.h
@@ -0,0 +1,9 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _H8300_MC146818RTC_H
+#define _H8300_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _H8300_MC146818RTC_H */
diff --git a/arch/h8300/include/asm/mutex.h b/arch/h8300/include/asm/mutex.h
new file mode 100644
index 0000000..458c1f7
--- /dev/null
+++ b/arch/h8300/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/h8300/include/asm/page.h b/arch/h8300/include/asm/page.h
new file mode 100644
index 0000000..3a987a5
--- /dev/null
+++ b/arch/h8300/include/asm/page.h
@@ -0,0 +1,18 @@
+#ifndef _H8300_PAGE_H
+#define _H8300_PAGE_H
+
+#include <asm-generic/page.h>
+#include <linux/types.h>
+
+#define MAP_NR(addr) (((uintptr_t)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#ifndef __ASSEMBLY__
+extern unsigned long rom_length;
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+extern unsigned long _ramend;
+#endif
+
+#endif
diff --git a/arch/h8300/include/asm/page_offset.h b/arch/h8300/include/asm/page_offset.h
new file mode 100644
index 0000000..888576d
--- /dev/null
+++ b/arch/h8300/include/asm/page_offset.h
@@ -0,0 +1,2 @@
+
+#define PAGE_OFFSET_RAW 0x00000000
diff --git a/arch/h8300/include/asm/pci.h b/arch/h8300/include/asm/pci.h
new file mode 100644
index 0000000..0b2acaa
--- /dev/null
+++ b/arch/h8300/include/asm/pci.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_H8300_PCI_H
+#define _ASM_H8300_PCI_H
+
+/*
+ * asm-h8300/pci.h - H8/300 specific PCI declarations.
+ *
+ * Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#define pcibios_assign_all_busses() 0
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+ /* We don't do dynamic PCI IRQ allocation */
+}
+
+#define PCI_DMA_BUS_IS_PHYS (1)
+
+#endif /* _ASM_H8300_PCI_H */
diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h
new file mode 100644
index 0000000..8341db6
--- /dev/null
+++ b/arch/h8300/include/asm/pgtable.h
@@ -0,0 +1,49 @@
+#ifndef _H8300_PGTABLE_H
+#define _H8300_PGTABLE_H
+#include <asm-generic/pgtable-nopud.h>
+#include <asm-generic/pgtable.h>
+#define pgtable_cache_init() do { } while (0)
+extern void paging_init(void);
+#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
+#define __swp_type(x) (0)
+#define __swp_offset(x) (0)
+#define __swp_entry(typ, off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+#define kern_addr_valid(addr) (1)
+#define pgprot_writecombine(prot) (prot)
+#define pgprot_noncached pgprot_writecombine
+
+static inline int pte_file(pte_t pte) { return 0; }
+#define swapper_pg_dir ((pgd_t *) 0)
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(0))
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+extern int is_in_rom(unsigned long);
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init() do { } while (0)
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define VMALLOC_START 0
+#define VMALLOC_END 0xffffffff
+
+#define arch_enter_lazy_cpu_mode() do {} while (0)
+
+#endif /* _H8300_PGTABLE_H */
diff --git a/arch/h8300/include/asm/processor.h b/arch/h8300/include/asm/processor.h
new file mode 100644
index 0000000..54e3fd8
--- /dev/null
+++ b/arch/h8300/include/asm/processor.h
@@ -0,0 +1,144 @@
+/*
+ * include/asm-h8300/processor.h
+ *
+ * Copyright (C) 2002 Yoshinori Sato
+ *
+ * Based on: linux/asm-m68nommu/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_H8300_PROCESSOR_H
+#define __ASM_H8300_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+#include <linux/compiler.h>
+#include <asm/segment.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+static inline unsigned long rdusp(void)
+{
+ extern unsigned int _sw_usp;
+
+ return _sw_usp;
+}
+
+static inline void wrusp(unsigned long usp)
+{
+ extern unsigned int _sw_usp;
+
+ _sw_usp = usp;
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE (0xFFFFFFFFUL)
+
+#ifdef __KERNEL__
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+#endif
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE 0
+
+struct thread_struct {
+ unsigned long ksp; /* kernel stack pointer */
+ unsigned long usp; /* user stack pointer */
+ unsigned long ccr; /* saved status register */
+ unsigned long esp0; /* points to SR of stack frame */
+ struct {
+ unsigned short *addr;
+ unsigned short inst;
+ } breakinfo;
+};
+
+#define INIT_THREAD { \
+ .ksp = sizeof(init_stack) + (unsigned long)init_stack, \
+ .usp = 0, \
+ .ccr = PS_S, \
+ .esp0 = 0, \
+ .breakinfo = { \
+ .addr = (unsigned short *)-1, \
+ .inst = 0 \
+ } \
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#if defined(CONFIG_CPU_H8300H)
+#define start_thread(_regs, _pc, _usp) \
+do { \
+ (_regs)->pc = (_pc); \
+ (_regs)->ccr = 0x00; /* clear all flags */ \
+ (_regs)->er5 = current->mm->start_data; /* GOT base */ \
+ (_regs)->sp = ((unsigned long)(_usp)) - sizeof(unsigned long) * 3; \
+} while (0)
+#endif
+#if defined(CONFIG_CPU_H8S)
+#define start_thread(_regs, _pc, _usp) \
+do { \
+ (_regs)->pc = (_pc); \
+ (_regs)->ccr = 0x00; /* clear kernel flag */ \
+ (_regs)->exr = 0x78; /* enable all interrupts */ \
+ (_regs)->er5 = current->mm->start_data; /* GOT base */ \
+ /* 14 = space for retaddr(4), vector(4), er0(4) and exr(2) on stack */ \
+ (_regs)->sp = ((unsigned long)(_usp)) - 14; \
+} while (0)
+#endif
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) \
+ ({ \
+ unsigned long eip = 0; \
+ if ((tsk)->thread.esp0 > PAGE_SIZE && \
+ MAP_NR((tsk)->thread.esp0) < max_mapnr) \
+ eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+ eip; })
+
+#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax() barrier()
+#define cpu_relax_lowlatency() cpu_relax()
+
+#define HARD_RESET_NOW() ({ \
+ local_irq_disable(); \
+ asm("jmp @@0"); \
+})
+
+#endif
diff --git a/arch/h8300/include/asm/ptrace.h b/arch/h8300/include/asm/ptrace.h
new file mode 100644
index 0000000..e693fb4
--- /dev/null
+++ b/arch/h8300/include/asm/ptrace.h
@@ -0,0 +1,36 @@
+#ifndef _H8300_PTRACE_H
+#define _H8300_PTRACE_H
+
+#include <uapi/asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+#ifndef PS_S
+#define PS_S (0x10)
+#endif
+
+#if defined(CONFIG_CPU_H8300H)
+#define H8300_REGS_NO 11
+#endif
+#if defined(CONFIG_CPU_H8S)
+#define H8300_REGS_NO 12
+#endif
+
+#define arch_has_single_step() (1)
+
+#define user_mode(regs) (!((regs)->ccr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+#define user_stack_pointer(regs) ((regs)->sp)
+#define current_pt_regs() ((struct pt_regs *) \
+ (THREAD_SIZE + (unsigned long)current_thread_info()) - 1)
+#define signal_pt_regs() ((struct pt_regs *)current->thread.esp0)
+#define current_user_stack_pointer() rdusp()
+#define task_pt_regs(task) \
+ ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
+
+extern long h8300_get_reg(struct task_struct *task, int regno);
+extern int h8300_put_reg(struct task_struct *task, int regno,
+ unsigned long data);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _H8300_PTRACE_H */
diff --git a/arch/h8300/include/asm/segment.h b/arch/h8300/include/asm/segment.h
new file mode 100644
index 0000000..c8bc68e
--- /dev/null
+++ b/arch/h8300/include/asm/segment.h
@@ -0,0 +1,49 @@
+#ifndef _H8300_SEGMENT_H
+#define _H8300_SEGMENT_H
+
+/* define constants */
+#define USER_DATA (1)
+#ifndef __USER_DS
+#define __USER_DS (USER_DATA)
+#endif
+#define USER_PROGRAM (2)
+#define SUPER_DATA (3)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (4)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+#define USER_DS MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+ return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+ /* return the supervisor data space code */
+ return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+}
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _H8300_SEGMENT_H */
diff --git a/arch/h8300/include/asm/sh_bios.h b/arch/h8300/include/asm/sh_bios.h
new file mode 100644
index 0000000..9ce513c
--- /dev/null
+++ b/arch/h8300/include/asm/sh_bios.h
@@ -0,0 +1,4 @@
+#ifndef SH_BIOS_H
+#define SH_BIOS_H
+
+#endif
diff --git a/arch/h8300/include/asm/signal.h b/arch/h8300/include/asm/signal.h
new file mode 100644
index 0000000..5870835
--- /dev/null
+++ b/arch/h8300/include/asm/signal.h
@@ -0,0 +1,22 @@
+#ifndef _H8300_SIGNAL_H
+#define _H8300_SIGNAL_H
+
+#include <uapi/asm/signal.h>
+
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define __ARCH_HAS_SA_RESTORER
+#include <asm/sigcontext.h>
+
+#endif /* _H8300_SIGNAL_H */
diff --git a/arch/h8300/include/asm/smp.h b/arch/h8300/include/asm/smp.h
new file mode 100644
index 0000000..9e9bd7e
--- /dev/null
+++ b/arch/h8300/include/asm/smp.h
@@ -0,0 +1 @@
+/* nothing required here yet */
diff --git a/arch/h8300/include/asm/spinlock.h b/arch/h8300/include/asm/spinlock.h
new file mode 100644
index 0000000..d5407fa
--- /dev/null
+++ b/arch/h8300/include/asm/spinlock.h
@@ -0,0 +1,6 @@
+#ifndef __H8300_SPINLOCK_H
+#define __H8300_SPINLOCK_H
+
+#error "H8/300 doesn't do SMP yet"
+
+#endif
diff --git a/arch/h8300/include/asm/string.h b/arch/h8300/include/asm/string.h
new file mode 100644
index 0000000..5dc5a8a
--- /dev/null
+++ b/arch/h8300/include/asm/string.h
@@ -0,0 +1,17 @@
+#ifndef _H8300_STRING_H_
+#define _H8300_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *s, int c, size_t count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *d, const void *s, size_t count);
+
+#endif /* KERNEL */
+
+#endif
diff --git a/arch/h8300/include/asm/switch_to.h b/arch/h8300/include/asm/switch_to.h
new file mode 100644
index 0000000..7ad1bf9
--- /dev/null
+++ b/arch/h8300/include/asm/switch_to.h
@@ -0,0 +1,51 @@
+#ifndef _H8300_SWITCH_TO_H
+#define _H8300_SWITCH_TO_H
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing. This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1, offset of tss in d1, and whether
+ * the mm structures are shared in d2 (to avoid atc flushing).
+ *
+ * H8/300 Porting 2002/09/04 Yoshinori Sato
+ */
+
+asmlinkage void resume(void);
+#define switch_to(prev, next, last) \
+do { \
+ void *_last; \
+ __asm__ __volatile__( \
+ "mov.l %1, er0\n\t" \
+ "mov.l %2, er1\n\t" \
+ "mov.l %3, er2\n\t" \
+ "jsr @_resume\n\t" \
+ "mov.l er2,%0\n\t" \
+ : "=r" (_last) \
+ : "r" (&(prev->thread)), \
+ "r" (&(next->thread)), \
+ "g" (prev) \
+ : "cc", "er0", "er1", "er2", "er3"); \
+ (last) = _last; \
+} while (0)
+
+#endif /* _H8300_SWITCH_TO_H */
diff --git a/arch/h8300/include/asm/syscall.h b/arch/h8300/include/asm/syscall.h
new file mode 100644
index 0000000..b41f688
--- /dev/null
+++ b/arch/h8300/include/asm/syscall.h
@@ -0,0 +1,56 @@
+#ifndef __ASM_H8300_SYSCALLS_32_H
+#define __ASM_H8300_SYSCALLS_32_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+static inline int
+syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+ return regs->orig_er0;
+}
+
+static inline void
+syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+ unsigned int i, unsigned int n, unsigned long *args)
+{
+ BUG_ON(i + n > 6);
+
+ while (n > 0) {
+ switch (i) {
+ case 0:
+ *args++ = regs->er1;
+ break;
+ case 1:
+ *args++ = regs->er2;
+ break;
+ case 2:
+ *args++ = regs->er3;
+ break;
+ case 3:
+ *args++ = regs->er4;
+ break;
+ case 4:
+ *args++ = regs->er5;
+ break;
+ case 5:
+ *args++ = regs->er6;
+ break;
+ }
+ i++;
+ n--;
+ }
+}
+
+
+
+/* Misc syscall related bits */
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs);
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_H8300_SYSCALLS_32_H */
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
new file mode 100644
index 0000000..eded1ee
--- /dev/null
+++ b/arch/h8300/include/asm/thread_info.h
@@ -0,0 +1,119 @@
+/* thread_info.h: h8300 low-level thread information
+ * adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ int cpu; /* cpu we're on */
+ int preempt_count; /* 0 => preemptable, <0 => BUG */
+ struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE_ORDER 1
+#define THREAD_SIZE 8192 /* 2 pages */
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+
+ __asm__("mov.l sp, %0\n\t"
+ "and.w %1, %T0"
+ : "=&r"(ti)
+ : "i" (~(THREAD_SIZE-1) & 0xffff));
+ return ti;
+}
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ */
+#define TI_TASK 0
+#define TI_EXECDOMAIN 4
+#define TI_FLAGS 8
+#define TI_CPU 12
+#define TI_PRE_COUNT 16
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_SIGPENDING 1 /* signal pending */
+#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
+#define TIF_SINGLESTEP 3 /* singlestepping active */
+#define TIF_MEMDIE 4 /* is terminating due to OOM killer */
+#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
+#define TIF_NOTIFY_RESUME 6 /* callback before returning to user */
+#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */
+#define TIF_SYSCALL_TRACEPOINT 8 /* for ftrace syscall instrumentation */
+#define TIF_POLLING_NRFLAG 9 /* true if poll_idle() is polling TIF_NEED_RESCHED */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
+#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
+#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
+#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
+
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+ _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT)
+
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \
+ _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \
+ _TIF_SINGLESTEP | _TIF_NOTIFY_RESUME | \
+ _TIF_SYSCALL_TRACEPOINT)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK (_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
+ _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/h8300/include/asm/timer.h b/arch/h8300/include/asm/timer.h
new file mode 100644
index 0000000..c905f4e
--- /dev/null
+++ b/arch/h8300/include/asm/timer.h
@@ -0,0 +1,31 @@
+#ifndef __H8300_TIMER_H
+#define __H8300_TIMER_H
+
+unsigned long get_cpu_clock(void);
+
+#define H8300_TIMER_FREQ get_cpu_clock() /* Timer input freq. */
+
+#define H8300_TMR8_CLKSRC 0
+#define H8300_TMR8_CLKEVTDEV 1
+
+#define H8300_TMR8_DIV_8 0
+#define H8300_TMR8_DIV_64 1
+#define H8300_TMR8_DIV_8192 2
+
+struct h8300_timer8_config {
+ int mode;
+ int div;
+ int rating;
+};
+
+struct h8300_timer16_config {
+ int rating;
+ __u8 enb;
+ __u8 imfa;
+ __u8 imiea;
+};
+
+struct h8300_tpu_config {
+ int rating;
+};
+#endif
diff --git a/arch/h8300/include/asm/tlb.h b/arch/h8300/include/asm/tlb.h
new file mode 100644
index 0000000..2c6fa4ee
--- /dev/null
+++ b/arch/h8300/include/asm/tlb.h
@@ -0,0 +1,8 @@
+#ifndef __H8300_TLB_H__
+#define __H8300_TLB_H__
+
+#define tlb_flush(tlb) do { } while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif
diff --git a/arch/h8300/include/asm/topology.h b/arch/h8300/include/asm/topology.h
new file mode 100644
index 0000000..fdc1219
--- /dev/null
+++ b/arch/h8300/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_H8300_TOPOLOGY_H
+#define _ASM_H8300_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_H8300_TOPOLOGY_H */
diff --git a/arch/h8300/include/asm/traps.h b/arch/h8300/include/asm/traps.h
new file mode 100644
index 0000000..aa34e75
--- /dev/null
+++ b/arch/h8300/include/asm/traps.h
@@ -0,0 +1,41 @@
+/*
+ * linux/include/asm-h8300/traps.h
+ *
+ * Copyright (C) 2003 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _H8300_TRAPS_H
+#define _H8300_TRAPS_H
+
+extern void _system_call(void);
+extern void _interrupt_entry(void);
+extern void _trace_break(void);
+extern void _nmi(void);
+extern void _interrupt_entry(void);
+
+extern unsigned long *_interrupt_redirect_table;
+
+#define JMP_OP 0x5a000000
+#define JSR_OP 0x5e000000
+#define VECTOR(address) ((JMP_OP)|((unsigned long)address))
+#define REDIRECT(address) ((JSR_OP)|((unsigned long)address))
+#define CPU_VECTOR ((unsigned long *)0x000000)
+#define ADDR_MASK (0xffffff)
+
+#define TRACE_VEC 5
+
+#define TRAP0_VEC 8
+#define TRAP1_VEC 9
+#define TRAP2_VEC 10
+#define TRAP3_VEC 11
+
+extern char _start, _etext;
+#define check_kernel_text(addr) \
+ ((addr >= (unsigned long)(&_start)) && \
+ (addr < (unsigned long)(&_etext)))
+
+#endif /* _H8300_TRAPS_H */
diff --git a/arch/h8300/include/asm/uaccess.h b/arch/h8300/include/asm/uaccess.h
new file mode 100644
index 0000000..a3b6b18
--- /dev/null
+++ b/arch/h8300/include/asm/uaccess.h
@@ -0,0 +1,136 @@
+#ifndef __H8300_UACCESS_H
+#define __H8300_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/* We let the MMU do all checking */
+#define access_ok(type, addr, size) __access_ok((unsigned long)addr, size)
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+#define RANGE_CHECK_OK(addr, size, lower, upper) \
+ (((addr) >= (lower)) && (((addr) + (size)) < (upper)))
+
+ extern unsigned long memory_end;
+
+ return RANGE_CHECK_OK(addr, size, 0L, memory_end);
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+ unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x, ptr) \
+({ \
+ int __pu_err = 0; \
+ typeof(*(ptr)) __pu_val = (x); \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ /* falll through */ \
+ case 2: \
+ /* fall through */ \
+ case 4: \
+ *(ptr) = x; \
+ break; \
+ case 8: \
+ memcpy(ptr, &__pu_val, sizeof(*(ptr))); \
+ break; \
+ default: \
+ __pu_err = __put_user_bad(); \
+ break; \
+ } \
+ __pu_err; \
+})
+
+#define __put_user(x, ptr) put_user(x, ptr)
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define __ptr(x) ((unsigned long *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define get_user(x, ptr) \
+({ \
+ typeof(*(ptr)) __gu_val; \
+ int __gu_err = 0; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ *(u8 *)&__gu_val = *((u8 *)(ptr)); \
+ break; \
+ case 2: \
+ *(u16 *)&__gu_val = *((u16 *)ptr); \
+ break; \
+ case 4: \
+ *(u32 *)&__gu_val = *((u32 *)ptr); \
+ break; \
+ case 8: \
+ memcpy((void *)&__gu_val, ptr, sizeof(*(ptr))); \
+ break; \
+ default: \
+ __gu_err = __get_user_bad(); \
+ break; \
+ } \
+ (x) = (typeof(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+#define __get_user(x, ptr) get_user(x, ptr)
+
+extern int __get_user_bad(void);
+
+#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+unsigned long clear_user(void __user *addr, unsigned long size);
+#define strnlen_user(s, n) (strnlen(s, n) + 1)
+long strncpy_from_user(char *d, const char *s, long n);
+
+#define __clear_user clear_user
+
+#endif /* _H8300_UACCESS_H */
diff --git a/arch/h8300/include/asm/unaligned.h b/arch/h8300/include/asm/unaligned.h
new file mode 100644
index 0000000..b8d06c7
--- /dev/null
+++ b/arch/h8300/include/asm/unaligned.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_H8300_UNALIGNED_H
+#define _ASM_H8300_UNALIGNED_H
+
+#include <linux/unaligned/be_memmove.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+
+#endif /* _ASM_H8300_UNALIGNED_H */
diff --git a/arch/h8300/include/asm/user.h b/arch/h8300/include/asm/user.h
new file mode 100644
index 0000000..2e3555f
--- /dev/null
+++ b/arch/h8300/include/asm/user.h
@@ -0,0 +1,74 @@
+#ifndef _H8300_USER_H
+#define _H8300_USER_H
+
+#include <asm/page.h>
+
+/* Core file format: The core file is written in such a way that gdb
+ can understand it and provide useful information to the user (under
+ linux we use the 'trad-core' bfd). There are quite a number of
+ obstacles to being able to view the contents of the floating point
+ registers, and until these are solved you will not be able to view the
+ contents of them. Actually, you can read in the core file and look at
+ the contents of the user struct to find out what the floating point
+ registers contain.
+ The actual file contents are as follows:
+ UPAGE: 1 page consisting of a user struct that tells gdb what is present
+ in the file. Directly after this is a copy of the task_struct, which
+ is currently not used by gdb, but it may come in useful at some point.
+ All of the registers are stored as part of the upage. The upage should
+ always be only one page.
+ DATA: The data area is stored. We use current->end_text to
+ current->brk to pick up all of the user variables, plus any memory
+ that may have been malloced. No attempt is made to determine if a page
+ is demand-zero or if a page is totally unused, we just cover the entire
+ range. All of the addresses are rounded in such a way that an integral
+ number of pages is written.
+ STACK: We need the stack information in order to get a meaningful
+ backtrace. We need to write the data from (esp) to
+ current->start_stack, so we round each of these off in order to be able
+ to write an integer number of pages.
+ The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
+ is still the layout used by user (the new pt_regs doesn't have
+ all registers). */
+struct user_regs_struct {
+ long er1, er2, er3, er4, er5, er6;
+ long er0;
+ long usp;
+ long orig_er0;
+ long ccr;
+ long pc;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+ this will be used by gdb to figure out where the data and stack segments
+ are within the file, and what virtual addresses to use. */
+struct user {
+/* We start with the registers, to mimic the way that "memory" is returned
+ from the ptrace(3,...) function. */
+ struct user_regs_struct regs; /* Where the registers are actually stored */
+/* ptrace does not yet supply these. Someday.... */
+/* The rest of this junk is to help gdb figure out what goes where */
+ unsigned long int u_tsize; /* Text segment size (pages). */
+ unsigned long int u_dsize; /* Data segment size (pages). */
+ unsigned long int u_ssize; /* Stack segment size (pages). */
+ unsigned long start_code; /* Starting virtual address of text. */
+ unsigned long start_stack; /* Starting virtual address of stack area.
+ This is actually the bottom of the stack,
+ the top of the stack is always found in the
+ esp register. */
+ long int signal; /* Signal that caused the core dump. */
+ int reserved; /* No longer used */
+ unsigned long u_ar0; /* Used by gdb to help find the values for */
+ /* the registers. */
+ unsigned long magic; /* To uniquely identify a core file */
+ char u_comm[32]; /* User command that was responsible */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [PATCH v8 01/17] h8300: Assembly headers.
2015-04-20 6:13 ` [PATCH v8 01/17] h8300: Assembly headers Yoshinori Sato
@ 2015-04-20 7:17 ` Richard Weinberger
2015-04-20 7:47 ` Stephen Rothwell
2015-04-21 6:50 ` Yoshinori Sato
2015-04-20 7:44 ` Tobias Klauser
2015-04-20 14:00 ` Tobias Klauser
2 siblings, 2 replies; 26+ messages in thread
From: Richard Weinberger @ 2015-04-20 7:17 UTC (permalink / raw)
To: Yoshinori Sato; +Cc: LKML, Linux-Arch
dOn Mon, Apr 20, 2015 at 8:13 AM, Yoshinori Sato
<ysato@users.sourceforge.jp> wrote:
> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
> ---
> arch/h8300/include/asm/Kbuild | 66 ++++++
> arch/h8300/include/asm/asm-offsets.h | 1 +
> arch/h8300/include/asm/atomic.h | 159 +++++++++++++++
> arch/h8300/include/asm/bitops.h | 185 +++++++++++++++++
> arch/h8300/include/asm/bootparams.h | 17 ++
> arch/h8300/include/asm/bug.h | 12 ++
> arch/h8300/include/asm/cache.h | 11 +
> arch/h8300/include/asm/checksum.h | 102 ++++++++++
> arch/h8300/include/asm/cmpxchg.h | 65 ++++++
> arch/h8300/include/asm/delay.h | 38 ++++
> arch/h8300/include/asm/device.h | 6 +
> arch/h8300/include/asm/dma-mapping.h | 124 ++++++++++++
> arch/h8300/include/asm/elf.h | 101 ++++++++++
> arch/h8300/include/asm/emergency-restart.h | 6 +
> arch/h8300/include/asm/flat.h | 27 +++
> arch/h8300/include/asm/io.h | 314 +++++++++++++++++++++++++++++
> arch/h8300/include/asm/irq.h | 26 +++
> arch/h8300/include/asm/irqflags.h | 96 +++++++++
> arch/h8300/include/asm/mc146818rtc.h | 9 +
> arch/h8300/include/asm/mutex.h | 9 +
> arch/h8300/include/asm/page.h | 18 ++
> arch/h8300/include/asm/page_offset.h | 2 +
> arch/h8300/include/asm/pci.h | 19 ++
> arch/h8300/include/asm/pgtable.h | 49 +++++
> arch/h8300/include/asm/processor.h | 144 +++++++++++++
> arch/h8300/include/asm/ptrace.h | 36 ++++
> arch/h8300/include/asm/segment.h | 49 +++++
> arch/h8300/include/asm/sh_bios.h | 4 +
> arch/h8300/include/asm/signal.h | 22 ++
> arch/h8300/include/asm/smp.h | 1 +
> arch/h8300/include/asm/spinlock.h | 6 +
> arch/h8300/include/asm/string.h | 17 ++
> arch/h8300/include/asm/switch_to.h | 51 +++++
> arch/h8300/include/asm/syscall.h | 56 +++++
> arch/h8300/include/asm/thread_info.h | 119 +++++++++++
> arch/h8300/include/asm/timer.h | 31 +++
> arch/h8300/include/asm/tlb.h | 8 +
> arch/h8300/include/asm/topology.h | 6 +
> arch/h8300/include/asm/traps.h | 41 ++++
> arch/h8300/include/asm/uaccess.h | 136 +++++++++++++
> arch/h8300/include/asm/unaligned.h | 11 +
> arch/h8300/include/asm/user.h | 74 +++++++
> 42 files changed, 2274 insertions(+)
> create mode 100644 arch/h8300/include/asm/Kbuild
> create mode 100644 arch/h8300/include/asm/asm-offsets.h
> create mode 100644 arch/h8300/include/asm/atomic.h
> create mode 100644 arch/h8300/include/asm/bitops.h
> create mode 100644 arch/h8300/include/asm/bootparams.h
> create mode 100644 arch/h8300/include/asm/bug.h
> create mode 100644 arch/h8300/include/asm/cache.h
> create mode 100644 arch/h8300/include/asm/checksum.h
> create mode 100644 arch/h8300/include/asm/cmpxchg.h
> create mode 100644 arch/h8300/include/asm/delay.h
> create mode 100644 arch/h8300/include/asm/device.h
> create mode 100644 arch/h8300/include/asm/dma-mapping.h
> create mode 100644 arch/h8300/include/asm/elf.h
> create mode 100644 arch/h8300/include/asm/emergency-restart.h
> create mode 100644 arch/h8300/include/asm/flat.h
> create mode 100644 arch/h8300/include/asm/io.h
> create mode 100644 arch/h8300/include/asm/irq.h
> create mode 100644 arch/h8300/include/asm/irqflags.h
> create mode 100644 arch/h8300/include/asm/mc146818rtc.h
> create mode 100644 arch/h8300/include/asm/mutex.h
> create mode 100644 arch/h8300/include/asm/page.h
> create mode 100644 arch/h8300/include/asm/page_offset.h
> create mode 100644 arch/h8300/include/asm/pci.h
> create mode 100644 arch/h8300/include/asm/pgtable.h
> create mode 100644 arch/h8300/include/asm/processor.h
> create mode 100644 arch/h8300/include/asm/ptrace.h
> create mode 100644 arch/h8300/include/asm/segment.h
> create mode 100644 arch/h8300/include/asm/sh_bios.h
> create mode 100644 arch/h8300/include/asm/signal.h
> create mode 100644 arch/h8300/include/asm/smp.h
> create mode 100644 arch/h8300/include/asm/spinlock.h
> create mode 100644 arch/h8300/include/asm/string.h
> create mode 100644 arch/h8300/include/asm/switch_to.h
> create mode 100644 arch/h8300/include/asm/syscall.h
> create mode 100644 arch/h8300/include/asm/thread_info.h
> create mode 100644 arch/h8300/include/asm/timer.h
> create mode 100644 arch/h8300/include/asm/tlb.h
> create mode 100644 arch/h8300/include/asm/topology.h
> create mode 100644 arch/h8300/include/asm/traps.h
> create mode 100644 arch/h8300/include/asm/uaccess.h
> create mode 100644 arch/h8300/include/asm/unaligned.h
> create mode 100644 arch/h8300/include/asm/user.h
>
> diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild
> new file mode 100644
> index 0000000..9e9f4f3
> --- /dev/null
> +++ b/arch/h8300/include/asm/Kbuild
> @@ -0,0 +1,66 @@
> +generic-y += barrier.h
> +generic-y += bitsperlong.h
> +generic-y += bugs.h
> +generic-y += cacheflush.h
> +generic-y += clkdev.h
> +generic-y += cputime.h
> +generic-y += current.h
> +generic-y += div64.h
> +generic-y += dma.h
> +generic-y += emergency-restart.h
> +generic-y += errno.h
> +generic-y += exec.h
> +generic-y += fb.h
> +generic-y += fcntl.h
> +generic-y += ftrace.h
> +generic-y += futex.h
> +generic-y += hardirq.h
> +generic-y += hash.h
> +generic-y += hw_irq.h
> +generic-y += ioctl.h
> +generic-y += ioctls.h
> +generic-y += ipcbuf.h
> +generic-y += irq_regs.h
> +generic-y += irq_work.h
> +generic-y += kdebug.h
> +generic-y += kmap_types.h
> +generic-y += kvm_para.h
> +generic-y += linkage.h
> +generic-y += local.h
> +generic-y += local64.h
> +generic-y += mcs_spinlock.h
> +generic-y += mman.h
> +generic-y += mmu.h
> +generic-y += mmu_context.h
> +generic-y += module.h
> +generic-y += msgbuf.h
> +generic-y += param.h
> +generic-y += parport.h
> +generic-y += percpu.h
> +generic-y += pgalloc.h
> +generic-y += poll.h
> +generic-y += posix_types.h
> +generic-y += preempt.h
> +generic-y += resource.h
> +generic-y += scatterlist.h
> +generic-y += sections.h
> +generic-y += sembuf.h
> +generic-y += serial.h
> +generic-y += setup.h
> +generic-y += shmbuf.h
> +generic-y += shmparam.h
> +generic-y += siginfo.h
> +generic-y += sizes.h
> +generic-y += socket.h
> +generic-y += sockios.h
> +generic-y += stat.h
> +generic-y += statfs.h
> +generic-y += termbits.h
> +generic-y += termios.h
> +generic-y += timex.h
> +generic-y += tlbflush.h
> +generic-y += trace_clock.h
> +generic-y += types.h
> +generic-y += ucontext.h
> +generic-y += vga.h
> +generic-y += xor.h
> diff --git a/arch/h8300/include/asm/asm-offsets.h b/arch/h8300/include/asm/asm-offsets.h
> new file mode 100644
> index 0000000..d370ee3
> --- /dev/null
> +++ b/arch/h8300/include/asm/asm-offsets.h
> @@ -0,0 +1 @@
> +#include <generated/asm-offsets.h>
> diff --git a/arch/h8300/include/asm/atomic.h b/arch/h8300/include/asm/atomic.h
> new file mode 100644
> index 0000000..7ca73f8
> --- /dev/null
> +++ b/arch/h8300/include/asm/atomic.h
> @@ -0,0 +1,159 @@
> +#ifndef __ARCH_H8300_ATOMIC__
> +#define __ARCH_H8300_ATOMIC__
> +
> +#include <linux/types.h>
> +#include <asm/cmpxchg.h>
> +
> +/*
> + * Atomic operations that C can't guarantee us. Useful for
> + * resource counting etc..
> + */
> +
> +#define ATOMIC_INIT(i) { (i) }
> +
> +#define atomic_read(v) ACCESS_ONCE((v)->counter)
> +#define atomic_set(v, i) (((v)->counter) = i)
> +
> +#include <linux/kernel.h>
> +
> +static inline int atomic_add_return(int i, atomic_t *v)
> +{
> + h8300flags flags;
> + int ret;
> +
> + flags = arch_local_irq_save();
> + ret = v->counter += i;
> + arch_local_irq_restore(flags);
> + return ret;
> +}
> +
> +#define atomic_add(i, v) atomic_add_return(i, v)
> +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
> +
> +static inline int atomic_sub_return(int i, atomic_t *v)
> +{
> + h8300flags flags;
> + int ret;
> +
> + flags = arch_local_irq_save();
> + ret = v->counter -= i;
> + arch_local_irq_restore(flags);
> + return ret;
> +}
> +
> +#define atomic_sub(i, v) atomic_sub_return(i, v)
> +#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
> +
> +static inline int atomic_inc_return(atomic_t *v)
> +{
> + h8300flags flags;
> + int ret;
> +
> + flags = arch_local_irq_save();
> + v->counter++;
> + ret = v->counter;
> + arch_local_irq_restore(flags);
> + return ret;
> +}
> +
> +#define atomic_inc(v) atomic_inc_return(v)
> +
> +/*
> + * atomic_inc_and_test - increment and test
> + * @v: pointer of type atomic_t
> + *
> + * Atomically increments @v by 1
> + * and returns true if the result is zero, or false for all
> + * other cases.
> + */
> +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
> +
> +static inline int atomic_dec_return(atomic_t *v)
> +{
> + h8300flags flags;
> + int ret;
> +
> + flags = arch_local_irq_save();
> + --v->counter;
> + ret = v->counter;
> + arch_local_irq_restore(flags);
> + return ret;
> +}
> +
> +#define atomic_dec(v) atomic_dec_return(v)
> +
> +static inline int atomic_dec_and_test(atomic_t *v)
> +{
> + h8300flags flags;
> + int ret;
> +
> + flags = arch_local_irq_save();
> + --v->counter;
> + ret = v->counter;
> + arch_local_irq_restore(flags);
> + return ret == 0;
> +}
> +
> +static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
> +{
> + int ret;
> + h8300flags flags;
> +
> + flags = arch_local_irq_save();
> + ret = v->counter;
> + if (likely(ret == old))
> + v->counter = new;
> + arch_local_irq_restore(flags);
> + return ret;
> +}
> +
> +static inline int __atomic_add_unless(atomic_t *v, int a, int u)
> +{
> + int ret;
> + h8300flags flags;
> +
> + flags = arch_local_irq_save();
> + ret = v->counter;
> + if (ret != u)
> + v->counter += a;
> + arch_local_irq_restore(flags);
> + return ret;
> +}
> +
> +static inline void atomic_clear_mask(unsigned long mask, unsigned long *v)
> +{
> + unsigned char ccr;
> + unsigned long tmp;
> +
> + __asm__ __volatile__("stc ccr,%w3\n\t"
> + "orc #0x80,ccr\n\t"
> + "mov.l %0,%1\n\t"
> + "and.l %2,%1\n\t"
> + "mov.l %1,%0\n\t"
> + "ldc %w3,ccr"
> + : "=m"(*v), "=r"(tmp)
> + : "g"(~(mask)), "r"(ccr));
> +}
> +
> +static inline void atomic_set_mask(unsigned long mask, unsigned long *v)
> +{
> + unsigned char ccr;
> + unsigned long tmp;
> +
> + __asm__ __volatile__("stc ccr,%w3\n\t"
> + "orc #0x80,ccr\n\t"
> + "mov.l %0,%1\n\t"
> + "or.l %2,%1\n\t"
> + "mov.l %1,%0\n\t"
> + "ldc %w3,ccr"
> + : "=m"(*v), "=r"(tmp)
> + : "g"(~(mask)), "r"(ccr));
> +}
> +
> +/* Atomic operations are already serializing */
> +#define smp_mb__before_atomic_dec() barrier()
> +#define smp_mb__after_atomic_dec() barrier()
> +#define smp_mb__before_atomic_inc() barrier()
> +#define smp_mb__after_atomic_inc() barrier()
> +
> +#endif /* __ARCH_H8300_ATOMIC __ */
> diff --git a/arch/h8300/include/asm/bitops.h b/arch/h8300/include/asm/bitops.h
> new file mode 100644
> index 0000000..05999ab
> --- /dev/null
> +++ b/arch/h8300/include/asm/bitops.h
> @@ -0,0 +1,185 @@
> +#ifndef _H8300_BITOPS_H
> +#define _H8300_BITOPS_H
> +
> +/*
> + * Copyright 1992, Linus Torvalds.
> + * Copyright 2002, Yoshinori Sato
> + */
> +
> +#include <linux/compiler.h>
> +
> +#ifdef __KERNEL__
> +
> +#ifndef _LINUX_BITOPS_H
> +#error only <linux/bitops.h> can be included directly
> +#endif
> +
> +/*
> + * Function prototypes to keep gcc -Wall happy
> + */
> +
> +/*
> + * ffz = Find First Zero in word. Undefined if no zero exists,
> + * so code should check against ~0UL first..
> + */
> +static inline unsigned long ffz(unsigned long word)
> +{
> + unsigned long result;
> +
> + result = -1;
> + __asm__("1:\n\t"
> + "shlr.l %2\n\t"
> + "adds #1,%0\n\t"
> + "bcs 1b"
> + : "=r"(result)
> + : "0"(result), "r"(word));
> + return result;
> +}
> +
> +#define H8300_GEN_BITOP(FNAME, OP) \
> +static inline void FNAME(int nr, volatile unsigned long *addr) \
> +{ \
> + unsigned char *b_addr; \
> + unsigned char bit = nr & 7; \
> + \
> + b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3); \
> + if (__builtin_constant_p(nr)) { \
> + __asm__(OP " %1,%0" : "+WU"(*b_addr) : "i"(nr & 7)); \
> + } else { \
> + __asm__(OP " %s1,%0" : "+WU"(*b_addr) : "r"(bit)); \
> + } \
> +}
> +
> +/*
> + * clear_bit() doesn't provide any barrier for the compiler.
> + */
> +#define smp_mb__before_clear_bit() barrier()
> +#define smp_mb__after_clear_bit() barrier()
> +
> +H8300_GEN_BITOP(set_bit, "bset")
> +H8300_GEN_BITOP(clear_bit, "bclr")
> +H8300_GEN_BITOP(change_bit, "bnot")
> +#define __set_bit(nr, addr) set_bit((nr), (addr))
> +#define __clear_bit(nr, addr) clear_bit((nr), (addr))
> +#define __change_bit(nr, addr) change_bit((nr), (addr))
> +
> +#undef H8300_GEN_BITOP
> +
> +static inline int test_bit(int nr, const unsigned long *addr)
> +{
> + int ret = 0;
> + unsigned char *b_addr;
> + unsigned char bit = nr & 7;
> +
> + b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3);
> + if (__builtin_constant_p(nr)) {
> + __asm__("bld %Z2,%1\n\t"
> + "rotxl %0\n\t"
> + : "=r"(ret)
> + : "WU"(*b_addr), "i"(nr & 7), "0"(ret) : "cc");
> + } else {
> + __asm__("btst %w2,%1\n\t"
> + "beq 1f\n\t"
> + "inc.l #1,%0\n"
> + "1:"
> + : "=r"(ret)
> + : "WU"(*b_addr), "r"(bit), "0"(ret) : "cc");
> + }
> + return ret;
> +}
> +
> +#define __test_bit(nr, addr) test_bit(nr, addr)
> +
> +#define H8300_GEN_TEST_BITOP(FNNAME, OP) \
> +static inline int FNNAME(int nr, void *addr) \
> +{ \
> + int retval = 0; \
> + char ccrsave; \
> + unsigned char *b_addr; \
> + unsigned char bit = nr & 7; \
> + \
> + b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3); \
> + if (__builtin_constant_p(nr)) { \
> + __asm__("stc ccr,%s2\n\t" \
> + "orc #0x80,ccr\n\t" \
> + "bld %4,%1\n\t" \
> + OP " %4,%1\n\t" \
> + "rotxl.l %0\n\t" \
> + "ldc %s2,ccr" \
> + : "=r"(retval), "+WU" (*b_addr), "=&r"(ccrsave) \
> + : "0"(retval), "i"(nr & 7) : "cc"); \
> + } else { \
> + __asm__("stc ccr,%t3\n\t" \
> + "orc #0x80,ccr\n\t" \
> + "btst %s3,%1\n\t" \
> + OP " %s3,%1\n\t" \
> + "beq 1f\n\t" \
> + "inc.l #1,%0\n\t" \
> + "1:\n" \
> + "ldc %t3,ccr" \
> + : "=r"(retval), "+WU" (*b_addr) \
> + : "0" (retval), "r"(bit) : "cc"); \
> + } \
> + return retval; \
> +} \
> + \
> +static inline int __ ## FNNAME(int nr, void *addr) \
> +{ \
> + int retval = 0; \
> + unsigned char *b_addr; \
> + unsigned char bit = nr & 7; \
> + \
> + b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3); \
> + if (__builtin_constant_p(nr)) { \
> + __asm__("bld %3,%1\n\t" \
> + OP " %3,%1\n\t" \
> + "rotxl.l %0\n\t" \
> + : "=r"(retval), "+WU"(*b_addr) \
> + : "0" (retval), "i"(nr & 7)); \
> + } else { \
> + __asm__("btst %s3,%1\n\t" \
> + OP " %s3,%1\n\t" \
> + "beq 1f\n\t" \
> + "inc.l #1,%0\n\t" \
> + "1:" \
> + : "=r"(retval), "+WU"(*b_addr) \
> + : "0" (retval), "r"(bit)); \
> + } \
> + return retval; \
> +}
> +
> +H8300_GEN_TEST_BITOP(test_and_set_bit, "bset")
> +H8300_GEN_TEST_BITOP(test_and_clear_bit, "bclr")
> +H8300_GEN_TEST_BITOP(test_and_change_bit, "bnot")
> +#undef H8300_GEN_TEST_BITOP
> +
> +#include <asm-generic/bitops/ffs.h>
> +
> +static inline unsigned long __ffs(unsigned long word)
> +{
> + unsigned long result;
> +
> + result = -1;
> + __asm__("1:\n\t"
> + "shlr.l %2\n\t"
> + "adds #1,%0\n\t"
> + "bcc 1b"
> + : "=r" (result)
> + : "0"(result), "r"(word));
> + return result;
> +}
> +
> +#include <asm-generic/bitops/find.h>
> +#include <asm-generic/bitops/sched.h>
> +#include <asm-generic/bitops/hweight.h>
> +#include <asm-generic/bitops/lock.h>
> +#include <asm-generic/bitops/le.h>
> +#include <asm-generic/bitops/ext2-atomic.h>
> +
> +#endif /* __KERNEL__ */
> +
> +#include <asm-generic/bitops/fls.h>
> +#include <asm-generic/bitops/__fls.h>
> +#include <asm-generic/bitops/fls64.h>
> +
> +#endif /* _H8300_BITOPS_H */
> diff --git a/arch/h8300/include/asm/bootparams.h b/arch/h8300/include/asm/bootparams.h
> new file mode 100644
> index 0000000..6c0b145
> --- /dev/null
> +++ b/arch/h8300/include/asm/bootparams.h
> @@ -0,0 +1,17 @@
> +/*
> +H8/300 kernel boot parameters
> +*/
> +
> +#ifndef __ASM_H8300_BOOTPARAMS__
> +#define __ASM_H8300_BOOTPARAMS__
> +
> +struct bootparams {
> + short size;
> + unsigned char gpio_ddr[24];
> + unsigned char gpio_use[24];
> + unsigned int clock_freq;
> + unsigned int ram_end;
> + unsigned char *command_line;
> +} __packed __aligned(2);
> +
> +#endif
> diff --git a/arch/h8300/include/asm/bug.h b/arch/h8300/include/asm/bug.h
> new file mode 100644
> index 0000000..1e1be81
> --- /dev/null
> +++ b/arch/h8300/include/asm/bug.h
> @@ -0,0 +1,12 @@
> +#ifndef _H8300_BUG_H
> +#define _H8300_BUG_H
> +
> +/* always true */
> +#define is_valid_bugaddr(addr) (1)
> +
> +#include <asm-generic/bug.h>
> +
> +struct pt_regs;
> +extern void die(const char *str, struct pt_regs *fp, unsigned long err);
> +
> +#endif
> diff --git a/arch/h8300/include/asm/cache.h b/arch/h8300/include/asm/cache.h
> new file mode 100644
> index 0000000..0ef1edc
> --- /dev/null
> +++ b/arch/h8300/include/asm/cache.h
> @@ -0,0 +1,11 @@
> +#ifndef __ARCH_H8300_CACHE_H
> +#define __ARCH_H8300_CACHE_H
> +
> +/* bytes per L1 cache line */
> +#define L1_CACHE_SHIFT 2
> +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
> +
> +#define __cacheline_aligned
> +#define ____cacheline_aligned
> +
> +#endif
> diff --git a/arch/h8300/include/asm/checksum.h b/arch/h8300/include/asm/checksum.h
> new file mode 100644
> index 0000000..59e2adc9
> --- /dev/null
> +++ b/arch/h8300/include/asm/checksum.h
> @@ -0,0 +1,102 @@
> +#ifndef _H8300_CHECKSUM_H
> +#define _H8300_CHECKSUM_H
> +
> +/*
> + * computes the checksum of a memory block at buff, length len,
> + * and adds in "sum" (32-bit)
> + *
> + * returns a 32-bit number suitable for feeding into itself
> + * or csum_tcpudp_magic
> + *
> + * this function must be called with even lengths, except
> + * for the last fragment, which may be odd
> + *
> + * it's best to have buff aligned on a 32-bit boundary
> + */
> +__wsum csum_partial(const void *buff, int len, __wsum sum);
> +
> +/*
> + * the same as csum_partial, but copies from src while it
> + * checksums
> + *
> + * here even more important to align src and dst on a 32-bit (or even
> + * better 64-bit) boundary
> + */
> +
> +__wsum csum_partial_copy_nocheck(const void *src, void *dst,
> + int len, __wsum sum);
> +
> +
> +/*
> + * the same as csum_partial_copy, but copies from user space.
> + *
> + * here even more important to align src and dst on a 32-bit (or even
> + * better 64-bit) boundary
> + */
> +
> +extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
> + int len, __wsum sum, int *csum_err);
> +
> +__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
> +
> +
> +/*
> + * Fold a partial checksum
> + */
> +
> +static inline __sum16 csum_fold(__wsum sum)
> +{
> + __asm__("add.w %e0,%f0\n\t"
> + "xor.w %e0,%e0\n\t"
> + "rotxl.w %e0\n\t"
> + "add.w %e0,%f0\n\t"
> + "sub.w %e0,%e0\n\t"
> + : "=r"(sum)
> + : "0"(sum));
> + return (__force __sum16)~sum;
> +}
> +
> +
> +/*
> + * computes the checksum of the TCP/UDP pseudo-header
> + * returns a 16-bit checksum, already complemented
> + */
> +
> +static inline __wsum
> +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
> + unsigned short proto, __wsum sum)
> +{
> + int tmp;
> +
> + __asm__ ("sub.l %1,%1\n\t"
> + "add.l %3,%0\n\t"
> + "addx #0,%w1\n\t"
> + "add.l %4,%0\n\t"
> + "addx #0,%w1\n\t"
> + "add.l %5,%0\n\t"
> + "addx #0,%w1\n\t"
> + "add.l %1,%0\n\t"
> + "bcc 1f\n\t"
> + "inc.l #1,%0\n"
> + "1:"
> + : "=&r" (sum), "=&r"(tmp)
> + : "0" (sum), "1" (daddr),
> + "r" (saddr), "r" (len + proto));
> + return sum;
> +}
> +
> +static inline __sum16
> +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
> + unsigned short proto, __wsum sum)
> +{
> + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
> +}
> +
> +/*
> + * this routine is used for miscellaneous IP-like checksums, mainly
> + * in icmp.c
> + */
> +
> +extern __sum16 ip_compute_csum(const void *buff, int len);
> +
> +#endif /* _H8300_CHECKSUM_H */
> diff --git a/arch/h8300/include/asm/cmpxchg.h b/arch/h8300/include/asm/cmpxchg.h
> new file mode 100644
> index 0000000..95fec4c
> --- /dev/null
> +++ b/arch/h8300/include/asm/cmpxchg.h
> @@ -0,0 +1,65 @@
> +#ifndef __ARCH_H8300_CMPXCHG__
> +#define __ARCH_H8300_CMPXCHG__
> +
> +#include <linux/irqflags.h>
> +
> +#define xchg(ptr, x) \
> + ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), \
> + sizeof(*(ptr))))
> +
> +struct __xchg_dummy { unsigned long a[100]; };
> +#define __xg(x) ((volatile struct __xchg_dummy *)(x))
> +
> +static inline unsigned long __xchg(unsigned long x,
> + volatile void *ptr, int size)
> +{
> + unsigned long tmp, flags;
> +
> + local_irq_save(flags);
> +
> + switch (size) {
> + case 1:
> + __asm__ __volatile__
> + ("mov.b %2,%0\n\t"
> + "mov.b %1,%2"
> + : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)));
> + break;
> + case 2:
> + __asm__ __volatile__
> + ("mov.w %2,%0\n\t"
> + "mov.w %1,%2"
> + : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)));
> + break;
> + case 4:
> + __asm__ __volatile__
> + ("mov.l %2,%0\n\t"
> + "mov.l %1,%2"
> + : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)));
> + break;
> + default:
> + tmp = 0;
> + }
> + local_irq_restore(flags);
> + return tmp;
> +}
> +
> +#include <asm-generic/cmpxchg-local.h>
> +
> +/*
> + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
> + * them available.
> + */
> +#define cmpxchg_local(ptr, o, n) \
> + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), \
> + (unsigned long)(o), \
> + (unsigned long)(n), \
> + sizeof(*(ptr))))
> +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
> +
> +#ifndef CONFIG_SMP
> +#include <asm-generic/cmpxchg.h>
> +#endif
> +
> +#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
> +
> +#endif /* __ARCH_H8300_CMPXCHG__ */
> diff --git a/arch/h8300/include/asm/delay.h b/arch/h8300/include/asm/delay.h
> new file mode 100644
> index 0000000..2bdde59
> --- /dev/null
> +++ b/arch/h8300/include/asm/delay.h
> @@ -0,0 +1,38 @@
> +#ifndef _H8300_DELAY_H
> +#define _H8300_DELAY_H
> +
> +#include <asm/param.h>
> +
> +/*
> + * Copyright (C) 2002 Yoshinori Sato <ysato@sourceforge.jp>
> + *
> + * Delay routines, using a pre-computed "loops_per_second" value.
> + */
> +
> +static inline void __delay(unsigned long loops)
> +{
> + __asm__ __volatile__ ("1:\n\t"
> + "dec.l #1,%0\n\t"
> + "bne 1b"
> + : "=r" (loops) : "0"(loops));
> +}
> +
> +/*
> + * Use only for very small delays ( < 1 msec). Should probably use a
> + * lookup table, really, as the multiplications take much too long with
> + * short delays. This is a "reasonable" implementation, though (and the
> + * first constant multiplications gets optimized away if the delay is
> + * a constant)
> + */
> +
> +extern unsigned long loops_per_jiffy;
> +
> +static inline void udelay(unsigned long usecs)
> +{
> + usecs *= 4295; /* 2**32 / 1000000 */
> + usecs /= (loops_per_jiffy*HZ);
> + if (usecs)
> + __delay(usecs);
> +}
> +
> +#endif /* _H8300_DELAY_H */
> diff --git a/arch/h8300/include/asm/device.h b/arch/h8300/include/asm/device.h
> new file mode 100644
> index 0000000..06746c5
> --- /dev/null
> +++ b/arch/h8300/include/asm/device.h
> @@ -0,0 +1,6 @@
> +/*
> + * Arch specific extensions to struct device
> + *
> + * This file is released under the GPLv2
> + */
> +#include <asm-generic/device.h>
> diff --git a/arch/h8300/include/asm/dma-mapping.h b/arch/h8300/include/asm/dma-mapping.h
> new file mode 100644
> index 0000000..f6f4716
> --- /dev/null
> +++ b/arch/h8300/include/asm/dma-mapping.h
> @@ -0,0 +1,124 @@
> +#ifndef _H8300_DMA_MAPPING_H
> +#define _H8300_DMA_MAPPING_H
> +
> +struct scatterlist;
> +
> +static inline int dma_supported(struct device *dev, u64 mask)
> +{
> + return 1;
> +}
> +
> +static inline int dma_set_mask(struct device *dev, u64 mask)
> +{
> + return 0;
> +}
> +
> +extern void *dma_alloc_coherent(struct device *, size_t,
> + dma_addr_t *, gfp_t);
> +extern void dma_free_coherent(struct device *, size_t,
> + void *, dma_addr_t);
> +
> +static inline void *dma_alloc_attrs(struct device *dev, size_t size,
> + dma_addr_t *dma_handle, gfp_t flag,
> + struct dma_attrs *attrs)
> +{
> + /* attrs is not supported and ignored */
> + return dma_alloc_coherent(dev, size, dma_handle, flag);
> +}
> +
> +static inline void dma_free_attrs(struct device *dev, size_t size,
> + void *cpu_addr, dma_addr_t dma_handle,
> + struct dma_attrs *attrs)
> +{
> + /* attrs is not supported and ignored */
> + dma_free_coherent(dev, size, cpu_addr, dma_handle);
> +}
> +
> +static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
> + dma_addr_t *handle, gfp_t flag)
> +{
> + return dma_alloc_coherent(dev, size, handle, flag);
> +}
> +static inline void dma_free_noncoherent(struct device *dev, size_t size,
> + void *addr, dma_addr_t handle)
> +{
> + dma_free_coherent(dev, size, addr, handle);
> +}
> +static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
> + enum dma_data_direction dir)
> +{
> + /* we use coherent allocation, so not much to do here. */
> +}
> +
> +extern dma_addr_t dma_map_single(struct device *, void *, size_t,
> + enum dma_data_direction);
> +static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
> + size_t size, enum dma_data_direction dir)
> +{
> +}
> +
> +extern dma_addr_t dma_map_page(struct device *, struct page *,
> + unsigned long, size_t size,
> + enum dma_data_direction);
> +static inline void dma_unmap_page(struct device *dev, dma_addr_t address,
> + size_t size, enum dma_data_direction dir)
> +{
> +}
> +
> +extern int dma_map_sg(struct device *, struct scatterlist *, int,
> + enum dma_data_direction);
> +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
> + int nhwentries, enum dma_data_direction dir)
> +{
> +}
> +
> +extern void dma_sync_single_for_device(struct device *, dma_addr_t, size_t,
> + enum dma_data_direction);
> +extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
> + enum dma_data_direction);
> +
> +static inline void dma_sync_single_range_for_device(struct device *dev,
> + dma_addr_t dma_handle, unsigned long offset, size_t size,
> + enum dma_data_direction direction)
> +{
> + /* just sync everything for now */
> + dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
> +}
> +
> +static inline void dma_sync_single_for_cpu(struct device *dev,
> + dma_addr_t handle,
> + size_t size,
> + enum dma_data_direction dir)
> +{
> +}
> +
> +static inline void dma_sync_sg_for_cpu(struct device *dev,
> + struct scatterlist *sg,
> + int nents, enum dma_data_direction dir)
> +{
> +}
> +
> +static inline void dma_sync_single_range_for_cpu(struct device *dev,
> + dma_addr_t dma_handle, unsigned long offset, size_t size,
> + enum dma_data_direction direction)
> +{
> + /* just sync everything for now */
> + dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
> +}
> +
> +static inline int dma_mapping_error(struct device *dev, dma_addr_t handle)
> +{
> + return 0;
> +}
> +
> +/* drivers/base/dma-mapping.c */
> +extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
> + void *cpu_addr, dma_addr_t dma_addr, size_t size);
> +extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
> + void *cpu_addr, dma_addr_t dma_addr,
> + size_t size);
> +
> +#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
> +#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
> +
> +#endif
> diff --git a/arch/h8300/include/asm/elf.h b/arch/h8300/include/asm/elf.h
> new file mode 100644
> index 0000000..09031d0
> --- /dev/null
> +++ b/arch/h8300/include/asm/elf.h
> @@ -0,0 +1,101 @@
> +#ifndef __ASM_H8300_ELF_H
> +#define __ASM_H8300_ELF_H
> +
> +/*
> + * ELF register definitions..
> + */
> +
> +#include <asm/ptrace.h>
> +#include <asm/user.h>
> +
> +typedef unsigned long elf_greg_t;
> +
> +#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
> +typedef elf_greg_t elf_gregset_t[ELF_NGREG];
> +typedef unsigned long elf_fpregset_t;
> +
> +/*
> + * This is used to ensure we don't load something for the wrong architecture.
> + */
> +#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
> +
> +/*
> + * These are used to set parameters in the core dumps.
> + */
> +#define ELF_CLASS ELFCLASS32
> +#define ELF_DATA ELFDATA2MSB
> +#define ELF_ARCH EM_H8_300
> +#if defined(CONFIG_CPU_H8300H)
> +#define ELF_CORE_EFLAGS 0x810000
> +#endif
> +#if defined(CONFIG_CPU_H8S)
> +#define ELF_CORE_EFLAGS 0x820000
> +#endif
> +
> +#define ELF_PLAT_INIT(_r) do { (_r)->er1 = 0; } while (0)
> +
> +#define ELF_EXEC_PAGESIZE 4096
> +
> +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
> + use of this is to invoke "./ld.so someprog" to test out a new version of
> + the loader. We need to make sure that it is out of the way of the program
> + that it will "exec", and that there is sufficient room for the brk. */
> +
> +#define ELF_ET_DYN_BASE 0xD0000000UL
> +
> +/* This yields a mask that user programs can use to figure out what
> + instruction set this cpu supports. */
> +
> +#define ELF_HWCAP (0)
> +
> +/* This yields a string that ld.so will use to load implementation
> + specific libraries for optimization. This is more specific in
> + intent than poking at uname or /proc/cpuinfo. */
> +
> +#define ELF_PLATFORM (NULL)
> +
> +#define R_H8_NONE 0
> +#define R_H8_DIR32 1
> +#define R_H8_DIR32_28 2
> +#define R_H8_DIR32_24 3
> +#define R_H8_DIR32_16 4
> +#define R_H8_DIR32U 6
> +#define R_H8_DIR32U_28 7
> +#define R_H8_DIR32U_24 8
> +#define R_H8_DIR32U_20 9
> +#define R_H8_DIR32U_16 10
> +#define R_H8_DIR24 11
> +#define R_H8_DIR24_20 12
> +#define R_H8_DIR24_16 13
> +#define R_H8_DIR24U 14
> +#define R_H8_DIR24U_20 15
> +#define R_H8_DIR24U_16 16
> +#define R_H8_DIR16 17
> +#define R_H8_DIR16U 18
> +#define R_H8_DIR16S_32 19
> +#define R_H8_DIR16S_28 20
> +#define R_H8_DIR16S_24 21
> +#define R_H8_DIR16S_20 22
> +#define R_H8_DIR16S 23
> +#define R_H8_DIR8 24
> +#define R_H8_DIR8U 25
> +#define R_H8_DIR8Z_32 26
> +#define R_H8_DIR8Z_28 27
> +#define R_H8_DIR8Z_24 28
> +#define R_H8_DIR8Z_20 29
> +#define R_H8_DIR8Z_16 30
> +#define R_H8_PCREL16 31
> +#define R_H8_PCREL8 32
> +#define R_H8_BPOS 33
> +#define R_H8_PCREL32 34
> +#define R_H8_GOT32O 35
> +#define R_H8_GOT16O 36
> +#define R_H8_DIR16A8 59
> +#define R_H8_DIR16R8 60
> +#define R_H8_DIR24A8 61
> +#define R_H8_DIR24R8 62
> +#define R_H8_DIR32A16 63
> +#define R_H8_ABS32 65
> +#define R_H8_ABS32A16 127
> +
> +#endif
> diff --git a/arch/h8300/include/asm/emergency-restart.h b/arch/h8300/include/asm/emergency-restart.h
> new file mode 100644
> index 0000000..108d8c4
> --- /dev/null
> +++ b/arch/h8300/include/asm/emergency-restart.h
> @@ -0,0 +1,6 @@
> +#ifndef _ASM_EMERGENCY_RESTART_H
> +#define _ASM_EMERGENCY_RESTART_H
> +
> +#include <asm-generic/emergency-restart.h>
> +
> +#endif /* _ASM_EMERGENCY_RESTART_H */
> diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h
> new file mode 100644
> index 0000000..9ff092e
> --- /dev/null
> +++ b/arch/h8300/include/asm/flat.h
> @@ -0,0 +1,27 @@
> +/*
> + * arch/h8300/asm/include/flat.h -- uClinux flat-format executables
> + */
> +
> +#ifndef __H8300_FLAT_H__
> +#define __H8300_FLAT_H__
> +
> +#define flat_argvp_envp_on_stack() 1
> +#define flat_old_ram_flag(flags) 1
> +#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
> +#define flat_set_persistent(relval, p) 0
> +
> +/*
> + * on the H8 a couple of the relocations have an instruction in the
> + * top byte. As there can only be 24bits of address space, we just
> + * always preserve that 8bits at the top, when it isn't an instruction
> + * is is 0 (davidm@snapgear.com)
> + */
> +
> +#define flat_get_relocate_addr(rel) (rel & ~0x00000001)
> +#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
> + (get_unaligned(rp) & (((flags) & FLAT_FLAG_GOTPIC) ? \
> + 0xffffffff : 0x00ffffff))
> +#define flat_put_addr_at_rp(rp, addr, rel) \
> + put_unaligned(((*(char *)(rp)) << 24) | ((addr) & 0x00ffffff), (rp))
> +
> +#endif /* __H8300_FLAT_H__ */
> diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
> new file mode 100644
> index 0000000..51ee096
> --- /dev/null
> +++ b/arch/h8300/include/asm/io.h
> @@ -0,0 +1,314 @@
> +#ifndef _H8300_IO_H
> +#define _H8300_IO_H
> +
> +#ifdef __KERNEL__
> +
> +#include <linux/types.h>
> +
> +#define __raw_readb(addr) ({ u8 __v = *(volatile u8 *)(addr); __v; })
> +
> +#define __raw_readw(addr) ({ u16 __v = *(volatile u16 *)(addr); __v; })
> +
> +#define __raw_readl(addr) ({ u32 __v = *(volatile u32 *)(addr); __v; })
> +
> +#define __raw_writeb(b, addr) (void)((*(volatile u8 *)(addr)) = (b))
> +
> +#define __raw_writew(b, addr) (void)((*(volatile u16 *)(addr)) = (b))
> +
> +#define __raw_writel(b, addr) (void)((*(volatile u32 *)(addr)) = (b))
> +
> +#define readb __raw_readb
> +#define readw __raw_readw
> +#define readl __raw_readl
> +#define writeb __raw_writeb
> +#define writew __raw_writew
> +#define writel __raw_writel
> +
> +#if defined(CONFIG_H83069)
> +#define ABWCR 0xFEE020
> +#elif defined(CONFIG_H8S2678)
> +#define ABWCR 0xFFFEC0
> +#endif
> +
> +#ifdef CONFIG_H8300_BUBSSWAP
> +#define _swapw(x) __builtin_bswap16(x)
> +#define _swapl(x) __builtin_bswap32(x)
> +#else
> +#define _swapw(x) (x)
> +#define _swapl(x) (x)
> +#endif
> +
> +static inline int h8300_buswidth(unsigned int addr)
> +{
> + return (*(volatile u8 *)ABWCR & (1 << ((addr >> 21) & 7))) == 0;
> +}
> +
> +static inline void io_outsb(unsigned int addr, const void *buf, int len)
> +{
> + volatile unsigned char *ap_b = (volatile unsigned char *) addr;
> + volatile unsigned short *ap_w = (volatile unsigned short *) addr;
> + unsigned char *bp = (unsigned char *) buf;
> +
> + if (h8300_buswidth(addr) && (addr & 1)) {
> + while (len--)
> + *ap_w = *bp++;
> + } else {
> + while (len--)
> + *ap_b = *bp++;
> + }
> +}
> +
> +static inline void io_outsw(unsigned int addr, const void *buf, int len)
> +{
> + volatile unsigned short *ap = (volatile unsigned short *) addr;
> + unsigned short *bp = (unsigned short *) buf;
> +
> + while (len--)
> + *ap = _swapw(*bp++);
> +}
> +
> +static inline void io_outsl(unsigned int addr, const void *buf, int len)
> +{
> + volatile unsigned short *ap = (volatile unsigned short *) addr;
> + unsigned short *bp = (unsigned short *) buf;
> +
> + while (len--) {
> + *(ap + 1) = _swapw(*(bp + 0));
> + *(ap + 0) = _swapw(*(bp + 1));
> + bp += 2;
> + }
> +}
> +
> +static inline void io_outsw_noswap(unsigned int addr, const void *buf, int len)
> +{
> + volatile unsigned short *ap = (volatile unsigned short *) addr;
> + unsigned short *bp = (unsigned short *) buf;
> +
> + while (len--)
> + *ap = *bp++;
> +}
> +
> +static inline void io_outsl_noswap(unsigned int addr, const void *buf, int len)
> +{
> + volatile unsigned long *ap = (volatile unsigned long *) addr;
> + unsigned long *bp = (unsigned long *) buf;
> +
> + while (len--)
> + *ap = *bp++;
> +}
> +
> +static inline void io_insb(unsigned int addr, void *buf, int len)
> +{
> + volatile unsigned char *ap_b;
> + volatile unsigned short *ap_w;
> + unsigned char *bp = (unsigned char *) buf;
> +
> + if (h8300_buswidth(addr)) {
> + ap_w = (volatile unsigned short *)(addr & ~1);
> + while (len--)
> + *bp++ = *ap_w & 0xff;
> + } else {
> + ap_b = (volatile unsigned char *)addr;
> + while (len--)
> + *bp++ = *ap_b;
> + }
> +}
> +
> +static inline void io_insw(unsigned int addr, void *buf, int len)
> +{
> + volatile unsigned short *ap = (volatile unsigned short *) addr;
> + unsigned short *bp = (unsigned short *) buf;
> +
> + while (len--)
> + *bp++ = _swapw(*ap);
> +}
> +
> +static inline void io_insl(unsigned int addr, void *buf, int len)
> +{
> + volatile unsigned short *ap = (volatile unsigned short *) addr;
> + unsigned short *bp = (unsigned short *) buf;
> +
> + while (len--) {
> + *(bp + 0) = _swapw(*(ap + 1));
> + *(bp + 1) = _swapw(*(ap + 0));
> + bp += 2;
> + }
> +}
> +
> +static inline void io_insw_noswap(unsigned int addr, void *buf, int len)
> +{
> + volatile unsigned short *ap = (volatile unsigned short *) addr;
> + unsigned short *bp = (unsigned short *) buf;
> +
> + while (len--)
> + *bp++ = *ap;
> +}
> +
> +static inline void io_insl_noswap(unsigned int addr, void *buf, int len)
> +{
> + volatile unsigned long *ap = (volatile unsigned long *) addr;
> + unsigned long *bp = (unsigned long *) buf;
> +
> + while (len--)
> + *bp++ = *ap;
> +}
> +
> +/*
> + * make the short names macros so specific devices
> + * can override them as required
> + */
> +
> +#define memset_io(a, b, c) memset((void *)(a), (b), (c))
> +#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
> +#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
> +
> +#define mmiowb()
> +
> +#define inb(addr) ((h8300_buswidth(addr)) ? \
> + __raw_readw((addr) & ~1) & 0xff:__raw_readb(addr))
> +#define inw(addr) _swapw(__raw_readw(addr))
> +#define inl(addr) (_swapw(__raw_readw(addr) << 16 | \
> + _swapw(__raw_readw(addr + 2))))
> +#define outb(x, addr) ((void)((h8300_buswidth(addr) && ((addr) & 1)) ? \
> + __raw_writeb(x, (addr) & ~1) : \
> + __raw_writeb(x, addr)))
> +#define outw(x, addr) ((void) __raw_writew(_swapw(x), addr))
> +#define outl(x, addr) \
> + ((void) __raw_writel(_swapw(x & 0xffff) | \
> + _swapw(x >> 16) << 16, addr))
> +
> +#define inb_p(addr) inb(addr)
> +#define inw_p(addr) inw(addr)
> +#define inl_p(addr) inl(addr)
> +#define outb_p(x, addr) outb(x, addr)
> +#define outw_p(x, addr) outw(x, addr)
> +#define outl_p(x, addr) outl(x, addr)
> +
> +#define outsb(a, b, l) io_outsb(a, b, l)
> +#define outsw(a, b, l) io_outsw(a, b, l)
> +#define outsl(a, b, l) io_outsl(a, b, l)
> +
> +#define insb(a, b, l) io_insb(a, b, l)
> +#define insw(a, b, l) io_insw(a, b, l)
> +#define insl(a, b, l) io_insl(a, b, l)
> +
> +#define ioread8(a) __raw_readb(a)
> +#define ioread16(a) __raw_readw(a)
> +#define ioread32(a) __raw_readl(a)
> +
> +#define iowrite8(v, a) __raw_writeb((v), (a))
> +#define iowrite16(v, a) __raw_writew((v), (a))
> +#define iowrite32(v, a) __raw_writel((v), (a))
> +
> +#define ioread8_rep(p, d, c) insb(p, d, c)
> +#define ioread16_rep(p, d, c) insw(p, d, c)
> +#define ioread32_rep(p, d, c) insl(p, d, c)
> +#define iowrite8_rep(p, s, c) outsb(p, s, c)
> +#define iowrite16_rep(p, s, c) outsw(p, s, c)
> +#define iowrite32_rep(p, s, c) outsl(p, s, c)
> +
> +#define IO_SPACE_LIMIT 0xffffff
> +
> +/* Values for nocacheflag and cmode */
> +#define IOMAP_FULL_CACHING 0
> +#define IOMAP_NOCACHE_SER 1
> +#define IOMAP_NOCACHE_NONSER 2
> +#define IOMAP_WRITETHROUGH 3
> +
> +extern void *__ioremap(unsigned long physaddr, unsigned long size,
> + int cacheflag);
> +extern void __iounmap(void *addr, unsigned long size);
> +
> +static inline void *ioremap(unsigned long physaddr, unsigned long size)
> +{
> + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
> +}
> +static inline void *ioremap_nocache(unsigned long physaddr,
> + unsigned long size)
> +{
> + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
> +}
> +static inline void *ioremap_writethrough(unsigned long physaddr,
> + unsigned long size)
> +{
> + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
> +}
> +static inline void *ioremap_fullcache(unsigned long physaddr,
> + unsigned long size)
> +{
> + return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
> +}
> +
> +extern void iounmap(void *addr);
> +
> +#define ioremap_wc ioremap_nocache
> +
> +/* H8/300 internal I/O functions */
> +static inline unsigned char ctrl_inb(unsigned long addr)
> +{
> + return *(volatile unsigned char *)addr;
> +}
> +
> +static inline unsigned short ctrl_inw(unsigned long addr)
> +{
> + return *(volatile unsigned short *)addr;
> +}
> +
> +static inline unsigned long ctrl_inl(unsigned long addr)
> +{
> + return *(volatile unsigned long *)addr;
> +}
> +
> +static inline void ctrl_outb(unsigned char b, unsigned long addr)
> +{
> + *(volatile unsigned char *)addr = b;
> +}
> +
> +static inline void ctrl_outw(unsigned short b, unsigned long addr)
> +{
> + *(volatile unsigned short *)addr = b;
> +}
> +
> +static inline void ctrl_outl(unsigned long b, unsigned long addr)
> +{
> + *(volatile unsigned long *)addr = b;
> +}
> +
> +static inline void ctrl_bclr(int b, unsigned long addr)
> +{
> + if (__builtin_constant_p(b))
> + __asm__("bclr %1,%0" : : "WU"(addr), "i"(b));
> + else
> + __asm__("bclr %w1,%0" : : "WU"(addr), "r"(b));
> +}
> +
> +static inline void ctrl_bset(int b, unsigned long addr)
> +{
> + if (__builtin_constant_p(b))
> + __asm__("bset %1,%0" : : "WU"(addr), "i"(b));
> + else
> + __asm__("bset %w1,%0" : : "WU"(addr), "r"(b));
> +}
> +
> +/*
> + * Macros used for converting between virtual and physical mappings.
> + */
> +#define phys_to_virt(vaddr) ((void *) (vaddr))
> +#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
> +
> +#define virt_to_bus virt_to_phys
> +#define bus_to_virt phys_to_virt
> +/*
> + * Convert a physical pointer to a virtual kernel pointer for /dev/mem
> + * access
> + */
> +#define xlate_dev_mem_ptr(p) __va(p)
> +
> +/*
> + * Convert a virtual cached pointer to an uncached pointer
> + */
> +#define xlate_dev_kmem_ptr(p) (p)
> +
> +#endif /* __KERNEL__ */
> +
> +#endif /* _H8300_IO_H */
> diff --git a/arch/h8300/include/asm/irq.h b/arch/h8300/include/asm/irq.h
> new file mode 100644
> index 0000000..69f23f0
> --- /dev/null
> +++ b/arch/h8300/include/asm/irq.h
> @@ -0,0 +1,26 @@
> +#ifndef _H8300_IRQ_H_
> +#define _H8300_IRQ_H_
> +
> +#include <linux/irqchip.h>
> +
> +#if defined(CONFIG_CPU_H8300H)
> +#define NR_IRQS 64
> +#define IRQ_CHIP h8300h_irq_chip
> +#define EXT_IRQ0 12
> +#define EXT_IRQS 6
> +#elif defined(CONFIG_CPU_H8S)
> +#define NR_IRQS 128
> +#define IRQ_CHIP h8s_irq_chip
> +#define EXT_IRQ0 16
> +#define EXT_IRQS 16
> +#endif
> +
> +static inline int irq_canonicalize(int irq)
> +{
> + return irq;
> +}
> +
> +void h8300_init_ipr(void);
> +extern struct irq_chip h8300h_irq_chip;
> +extern struct irq_chip h8s_irq_chip;
> +#endif /* _H8300_IRQ_H_ */
> diff --git a/arch/h8300/include/asm/irqflags.h b/arch/h8300/include/asm/irqflags.h
> new file mode 100644
> index 0000000..5e1e324
> --- /dev/null
> +++ b/arch/h8300/include/asm/irqflags.h
> @@ -0,0 +1,96 @@
> +#ifndef _H8300_IRQFLAGS_H
> +#define _H8300_IRQFLAGS_H
> +
> +#ifdef CONFIG_CPU_H8300H
> +typedef unsigned char h8300flags;
> +
> +static inline h8300flags arch_local_save_flags(void)
> +{
> + h8300flags flags;
> +
> + __asm__ volatile ("stc ccr,%w0" : "=r" (flags));
> + return flags;
> +}
> +
> +static inline void arch_local_irq_disable(void)
> +{
> + __asm__ volatile ("orc #0xc0,ccr");
> +}
> +
> +static inline void arch_local_irq_enable(void)
> +{
> + __asm__ volatile ("andc #0x3f,ccr");
> +}
> +
> +static inline h8300flags arch_local_irq_save(void)
> +{
> + h8300flags flags;
> +
> + __asm__ volatile ("stc ccr,%w0\n\t"
> + "orc #0xc0,ccr" : "=r" (flags));
> + return flags;
> +}
> +
> +static inline void arch_local_irq_restore(h8300flags flags)
> +{
> + __asm__ volatile ("ldc %w0,ccr" : : "r" (flags) : "cc");
> +}
> +
> +static inline int arch_irqs_disabled_flags(unsigned long flags)
> +{
> + return (flags & 0xc0) == 0xc0;
> +}
> +#endif
> +#ifdef CONFIG_CPU_H8S
> +typedef unsigned short h8300flags;
> +
> +static inline h8300flags arch_local_save_flags(void)
> +{
> + h8300flags flags;
> +
> + __asm__ volatile ("stc ccr,%w0\n\tstc exr,%x0" : "=r" (flags));
> + return flags;
> +}
> +
> +static inline void arch_local_irq_disable(void)
> +{
> + __asm__ volatile ("orc #0x80,ccr\n\t");
> +}
> +
> +static inline void arch_local_irq_enable(void)
> +{
> + __asm__ volatile ("andc #0x7f,ccr\n\t"
> + "andc #0xf0,exr\n\t");
> +}
> +
> +static inline h8300flags arch_local_irq_save(void)
> +{
> + h8300flags flags;
> +
> + __asm__ volatile ("stc ccr,%w0\n\t"
> + "stc exr,%x0\n\t"
> + "orc #0x80,ccr\n\t"
> + : "=r" (flags));
> + return flags;
> +}
> +
> +static inline void arch_local_irq_restore(h8300flags flags)
> +{
> + __asm__ volatile ("ldc %w0,ccr\n\t"
> + "ldc %x0,exr"
> + : : "r" (flags) : "cc");
> +}
> +
> +static inline int arch_irqs_disabled_flags(h8300flags flags)
> +{
> + return (flags & 0x0080) == 0x0080;
> +}
> +
> +#endif
> +
> +static inline int arch_irqs_disabled(void)
> +{
> + return arch_irqs_disabled_flags(arch_local_save_flags());
> +}
> +
> +#endif /* _H8300_IRQFLAGS_H */
> diff --git a/arch/h8300/include/asm/mc146818rtc.h b/arch/h8300/include/asm/mc146818rtc.h
> new file mode 100644
> index 0000000..ab9d964
> --- /dev/null
> +++ b/arch/h8300/include/asm/mc146818rtc.h
> @@ -0,0 +1,9 @@
> +/*
> + * Machine dependent access functions for RTC registers.
> + */
> +#ifndef _H8300_MC146818RTC_H
> +#define _H8300_MC146818RTC_H
> +
> +/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
> +
> +#endif /* _H8300_MC146818RTC_H */
> diff --git a/arch/h8300/include/asm/mutex.h b/arch/h8300/include/asm/mutex.h
> new file mode 100644
> index 0000000..458c1f7
> --- /dev/null
> +++ b/arch/h8300/include/asm/mutex.h
> @@ -0,0 +1,9 @@
> +/*
> + * Pull in the generic implementation for the mutex fastpath.
> + *
> + * TODO: implement optimized primitives instead, or leave the generic
> + * implementation in place, or pick the atomic_xchg() based generic
> + * implementation. (see asm-generic/mutex-xchg.h for details)
> + */
> +
> +#include <asm-generic/mutex-dec.h>
> diff --git a/arch/h8300/include/asm/page.h b/arch/h8300/include/asm/page.h
> new file mode 100644
> index 0000000..3a987a5
> --- /dev/null
> +++ b/arch/h8300/include/asm/page.h
> @@ -0,0 +1,18 @@
> +#ifndef _H8300_PAGE_H
> +#define _H8300_PAGE_H
> +
> +#include <asm-generic/page.h>
> +#include <linux/types.h>
> +
> +#define MAP_NR(addr) (((uintptr_t)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
> +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
> + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
> +
> +#ifndef __ASSEMBLY__
> +extern unsigned long rom_length;
> +extern unsigned long memory_start;
> +extern unsigned long memory_end;
> +extern unsigned long _ramend;
> +#endif
> +
> +#endif
> diff --git a/arch/h8300/include/asm/page_offset.h b/arch/h8300/include/asm/page_offset.h
> new file mode 100644
> index 0000000..888576d
> --- /dev/null
> +++ b/arch/h8300/include/asm/page_offset.h
> @@ -0,0 +1,2 @@
> +
> +#define PAGE_OFFSET_RAW 0x00000000
> diff --git a/arch/h8300/include/asm/pci.h b/arch/h8300/include/asm/pci.h
> new file mode 100644
> index 0000000..0b2acaa
> --- /dev/null
> +++ b/arch/h8300/include/asm/pci.h
> @@ -0,0 +1,19 @@
> +#ifndef _ASM_H8300_PCI_H
> +#define _ASM_H8300_PCI_H
> +
> +/*
> + * asm-h8300/pci.h - H8/300 specific PCI declarations.
> + *
> + * Yoshinori Sato <ysato@users.sourceforge.jp>
> + */
> +
> +#define pcibios_assign_all_busses() 0
> +
> +static inline void pcibios_penalize_isa_irq(int irq, int active)
> +{
> + /* We don't do dynamic PCI IRQ allocation */
> +}
> +
> +#define PCI_DMA_BUS_IS_PHYS (1)
> +
> +#endif /* _ASM_H8300_PCI_H */
> diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h
> new file mode 100644
> index 0000000..8341db6
> --- /dev/null
> +++ b/arch/h8300/include/asm/pgtable.h
> @@ -0,0 +1,49 @@
> +#ifndef _H8300_PGTABLE_H
> +#define _H8300_PGTABLE_H
> +#include <asm-generic/pgtable-nopud.h>
> +#include <asm-generic/pgtable.h>
> +#define pgtable_cache_init() do { } while (0)
> +extern void paging_init(void);
> +#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
> +#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
> +#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
> +#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
> +#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
> +#define __swp_type(x) (0)
> +#define __swp_offset(x) (0)
> +#define __swp_entry(typ, off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
> +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
> +#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
> +#define kern_addr_valid(addr) (1)
> +#define pgprot_writecombine(prot) (prot)
> +#define pgprot_noncached pgprot_writecombine
> +
> +static inline int pte_file(pte_t pte) { return 0; }
> +#define swapper_pg_dir ((pgd_t *) 0)
> +/*
> + * ZERO_PAGE is a global shared page that is always zero: used
> + * for zero-mapped memory areas etc..
> + */
> +#define ZERO_PAGE(vaddr) (virt_to_page(0))
> +
> +/*
> + * These would be in other places but having them here reduces the diffs.
> + */
> +extern unsigned int kobjsize(const void *objp);
> +extern int is_in_rom(unsigned long);
> +
> +/*
> + * No page table caches to initialise
> + */
> +#define pgtable_cache_init() do { } while (0)
> +
> +/*
> + * All 32bit addresses are effectively valid for vmalloc...
> + * Sort of meaningless for non-VM targets.
> + */
> +#define VMALLOC_START 0
> +#define VMALLOC_END 0xffffffff
> +
> +#define arch_enter_lazy_cpu_mode() do {} while (0)
> +
> +#endif /* _H8300_PGTABLE_H */
> diff --git a/arch/h8300/include/asm/processor.h b/arch/h8300/include/asm/processor.h
> new file mode 100644
> index 0000000..54e3fd8
> --- /dev/null
> +++ b/arch/h8300/include/asm/processor.h
> @@ -0,0 +1,144 @@
> +/*
> + * include/asm-h8300/processor.h
> + *
> + * Copyright (C) 2002 Yoshinori Sato
> + *
> + * Based on: linux/asm-m68nommu/processor.h
> + *
> + * Copyright (C) 1995 Hamish Macdonald
> + */
> +
> +#ifndef __ASM_H8300_PROCESSOR_H
> +#define __ASM_H8300_PROCESSOR_H
> +
> +/*
> + * Default implementation of macro that returns current
> + * instruction pointer ("program counter").
> + */
> +#define current_text_addr() ({ __label__ _l; _l: &&_l; })
> +
> +#include <linux/compiler.h>
> +#include <asm/segment.h>
> +#include <asm/ptrace.h>
> +#include <asm/current.h>
> +
> +static inline unsigned long rdusp(void)
> +{
> + extern unsigned int _sw_usp;
> +
> + return _sw_usp;
> +}
> +
> +static inline void wrusp(unsigned long usp)
> +{
> + extern unsigned int _sw_usp;
> +
> + _sw_usp = usp;
> +}
> +
> +/*
> + * User space process size: 3.75GB. This is hardcoded into a few places,
> + * so don't change it unless you know what you are doing.
> + */
> +#define TASK_SIZE (0xFFFFFFFFUL)
> +
> +#ifdef __KERNEL__
> +#define STACK_TOP TASK_SIZE
> +#define STACK_TOP_MAX STACK_TOP
> +#endif
> +
> +/*
> + * This decides where the kernel will search for a free chunk of vm
> + * space during mmap's. We won't be using it
> + */
> +#define TASK_UNMAPPED_BASE 0
> +
> +struct thread_struct {
> + unsigned long ksp; /* kernel stack pointer */
> + unsigned long usp; /* user stack pointer */
> + unsigned long ccr; /* saved status register */
> + unsigned long esp0; /* points to SR of stack frame */
> + struct {
> + unsigned short *addr;
> + unsigned short inst;
> + } breakinfo;
> +};
> +
> +#define INIT_THREAD { \
> + .ksp = sizeof(init_stack) + (unsigned long)init_stack, \
> + .usp = 0, \
> + .ccr = PS_S, \
> + .esp0 = 0, \
> + .breakinfo = { \
> + .addr = (unsigned short *)-1, \
> + .inst = 0 \
> + } \
> +}
> +
> +/*
> + * Do necessary setup to start up a newly executed thread.
> + *
> + * pass the data segment into user programs if it exists,
> + * it can't hurt anything as far as I can tell
> + */
> +#if defined(CONFIG_CPU_H8300H)
> +#define start_thread(_regs, _pc, _usp) \
> +do { \
> + (_regs)->pc = (_pc); \
> + (_regs)->ccr = 0x00; /* clear all flags */ \
> + (_regs)->er5 = current->mm->start_data; /* GOT base */ \
> + (_regs)->sp = ((unsigned long)(_usp)) - sizeof(unsigned long) * 3; \
> +} while (0)
> +#endif
> +#if defined(CONFIG_CPU_H8S)
> +#define start_thread(_regs, _pc, _usp) \
> +do { \
> + (_regs)->pc = (_pc); \
> + (_regs)->ccr = 0x00; /* clear kernel flag */ \
> + (_regs)->exr = 0x78; /* enable all interrupts */ \
> + (_regs)->er5 = current->mm->start_data; /* GOT base */ \
> + /* 14 = space for retaddr(4), vector(4), er0(4) and exr(2) on stack */ \
> + (_regs)->sp = ((unsigned long)(_usp)) - 14; \
> +} while (0)
> +#endif
> +
> +/* Forward declaration, a strange C thing */
> +struct task_struct;
> +
> +/* Free all resources held by a thread. */
> +static inline void release_thread(struct task_struct *dead_task)
> +{
> +}
> +
> +/*
> + * Free current thread data structures etc..
> + */
> +static inline void exit_thread(void)
> +{
> +}
> +
> +/*
> + * Return saved PC of a blocked thread.
> + */
> +unsigned long thread_saved_pc(struct task_struct *tsk);
> +unsigned long get_wchan(struct task_struct *p);
> +
> +#define KSTK_EIP(tsk) \
> + ({ \
> + unsigned long eip = 0; \
> + if ((tsk)->thread.esp0 > PAGE_SIZE && \
> + MAP_NR((tsk)->thread.esp0) < max_mapnr) \
> + eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
> + eip; })
> +
> +#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
> +
> +#define cpu_relax() barrier()
> +#define cpu_relax_lowlatency() cpu_relax()
> +
> +#define HARD_RESET_NOW() ({ \
> + local_irq_disable(); \
> + asm("jmp @@0"); \
> +})
> +
> +#endif
> diff --git a/arch/h8300/include/asm/ptrace.h b/arch/h8300/include/asm/ptrace.h
> new file mode 100644
> index 0000000..e693fb4
> --- /dev/null
> +++ b/arch/h8300/include/asm/ptrace.h
> @@ -0,0 +1,36 @@
> +#ifndef _H8300_PTRACE_H
> +#define _H8300_PTRACE_H
> +
> +#include <uapi/asm/ptrace.h>
> +
> +#ifndef __ASSEMBLY__
> +#ifndef PS_S
> +#define PS_S (0x10)
> +#endif
> +
> +#if defined(CONFIG_CPU_H8300H)
> +#define H8300_REGS_NO 11
> +#endif
> +#if defined(CONFIG_CPU_H8S)
> +#define H8300_REGS_NO 12
> +#endif
> +
> +#define arch_has_single_step() (1)
> +
> +#define user_mode(regs) (!((regs)->ccr & PS_S))
> +#define instruction_pointer(regs) ((regs)->pc)
> +#define profile_pc(regs) instruction_pointer(regs)
> +#define user_stack_pointer(regs) ((regs)->sp)
> +#define current_pt_regs() ((struct pt_regs *) \
> + (THREAD_SIZE + (unsigned long)current_thread_info()) - 1)
> +#define signal_pt_regs() ((struct pt_regs *)current->thread.esp0)
> +#define current_user_stack_pointer() rdusp()
> +#define task_pt_regs(task) \
> + ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
> +
> +extern long h8300_get_reg(struct task_struct *task, int regno);
> +extern int h8300_put_reg(struct task_struct *task, int regno,
> + unsigned long data);
> +
> +#endif /* __ASSEMBLY__ */
> +#endif /* _H8300_PTRACE_H */
> diff --git a/arch/h8300/include/asm/segment.h b/arch/h8300/include/asm/segment.h
> new file mode 100644
> index 0000000..c8bc68e
> --- /dev/null
> +++ b/arch/h8300/include/asm/segment.h
> @@ -0,0 +1,49 @@
> +#ifndef _H8300_SEGMENT_H
> +#define _H8300_SEGMENT_H
> +
> +/* define constants */
> +#define USER_DATA (1)
> +#ifndef __USER_DS
> +#define __USER_DS (USER_DATA)
> +#endif
> +#define USER_PROGRAM (2)
> +#define SUPER_DATA (3)
> +#ifndef __KERNEL_DS
> +#define __KERNEL_DS (SUPER_DATA)
> +#endif
> +#define SUPER_PROGRAM (4)
> +
> +#ifndef __ASSEMBLY__
> +
> +typedef struct {
> + unsigned long seg;
> +} mm_segment_t;
> +
> +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
> +#define USER_DS MAKE_MM_SEG(__USER_DS)
> +#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
> +
> +/*
> + * Get/set the SFC/DFC registers for MOVES instructions
> + */
> +
> +static inline mm_segment_t get_fs(void)
> +{
> + return USER_DS;
> +}
> +
> +static inline mm_segment_t get_ds(void)
> +{
> + /* return the supervisor data space code */
> + return KERNEL_DS;
> +}
> +
> +static inline void set_fs(mm_segment_t val)
> +{
> +}
> +
> +#define segment_eq(a, b) ((a).seg == (b).seg)
> +
> +#endif /* __ASSEMBLY__ */
> +
> +#endif /* _H8300_SEGMENT_H */
> diff --git a/arch/h8300/include/asm/sh_bios.h b/arch/h8300/include/asm/sh_bios.h
> new file mode 100644
> index 0000000..9ce513c
> --- /dev/null
> +++ b/arch/h8300/include/asm/sh_bios.h
> @@ -0,0 +1,4 @@
> +#ifndef SH_BIOS_H
> +#define SH_BIOS_H
> +
> +#endif
> diff --git a/arch/h8300/include/asm/signal.h b/arch/h8300/include/asm/signal.h
> new file mode 100644
> index 0000000..5870835
> --- /dev/null
> +++ b/arch/h8300/include/asm/signal.h
> @@ -0,0 +1,22 @@
> +#ifndef _H8300_SIGNAL_H
> +#define _H8300_SIGNAL_H
> +
> +#include <uapi/asm/signal.h>
> +
> +/* Most things should be clean enough to redefine this at will, if care
> + is taken to make libc match. */
> +
> +#define _NSIG 64
> +#define _NSIG_BPW 32
> +#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
> +
> +typedef unsigned long old_sigset_t; /* at least 32 bits */
> +
> +typedef struct {
> + unsigned long sig[_NSIG_WORDS];
> +} sigset_t;
> +
> +#define __ARCH_HAS_SA_RESTORER
> +#include <asm/sigcontext.h>
> +
> +#endif /* _H8300_SIGNAL_H */
> diff --git a/arch/h8300/include/asm/smp.h b/arch/h8300/include/asm/smp.h
> new file mode 100644
> index 0000000..9e9bd7e
> --- /dev/null
> +++ b/arch/h8300/include/asm/smp.h
> @@ -0,0 +1 @@
> +/* nothing required here yet */
> diff --git a/arch/h8300/include/asm/spinlock.h b/arch/h8300/include/asm/spinlock.h
> new file mode 100644
> index 0000000..d5407fa
> --- /dev/null
> +++ b/arch/h8300/include/asm/spinlock.h
> @@ -0,0 +1,6 @@
> +#ifndef __H8300_SPINLOCK_H
> +#define __H8300_SPINLOCK_H
> +
> +#error "H8/300 doesn't do SMP yet"
> +
> +#endif
> diff --git a/arch/h8300/include/asm/string.h b/arch/h8300/include/asm/string.h
> new file mode 100644
> index 0000000..5dc5a8a
> --- /dev/null
> +++ b/arch/h8300/include/asm/string.h
> @@ -0,0 +1,17 @@
> +#ifndef _H8300_STRING_H_
> +#define _H8300_STRING_H_
> +
> +#ifdef __KERNEL__ /* only set these up for kernel code */
> +
> +#include <asm/setup.h>
> +#include <asm/page.h>
> +
> +#define __HAVE_ARCH_MEMSET
> +extern void *memset(void *s, int c, size_t count);
> +
> +#define __HAVE_ARCH_MEMCPY
> +extern void *memcpy(void *d, const void *s, size_t count);
> +
> +#endif /* KERNEL */
> +
> +#endif
> diff --git a/arch/h8300/include/asm/switch_to.h b/arch/h8300/include/asm/switch_to.h
> new file mode 100644
> index 0000000..7ad1bf9
> --- /dev/null
> +++ b/arch/h8300/include/asm/switch_to.h
> @@ -0,0 +1,51 @@
> +#ifndef _H8300_SWITCH_TO_H
> +#define _H8300_SWITCH_TO_H
> +
> +/*
> + * switch_to(n) should switch tasks to task ptr, first checking that
> + * ptr isn't the current task, in which case it does nothing. This
> + * also clears the TS-flag if the task we switched to has used the
> + * math co-processor latest.
> + */
> +/*
> + * switch_to() saves the extra registers, that are not saved
> + * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
> + * a0-a1. Some of these are used by schedule() and its predecessors
> + * and so we might get see unexpected behaviors when a task returns
> + * with unexpected register values.
> + *
> + * syscall stores these registers itself and none of them are used
> + * by syscall after the function in the syscall has been called.
> + *
> + * Beware that resume now expects *next to be in d1 and the offset of
> + * tss to be in a1. This saves a few instructions as we no longer have
> + * to push them onto the stack and read them back right after.
> + *
> + * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
> + *
> + * Changed 96/09/19 by Andreas Schwab
> + * pass prev in a0, next in a1, offset of tss in d1, and whether
> + * the mm structures are shared in d2 (to avoid atc flushing).
> + *
> + * H8/300 Porting 2002/09/04 Yoshinori Sato
> + */
> +
> +asmlinkage void resume(void);
> +#define switch_to(prev, next, last) \
> +do { \
> + void *_last; \
> + __asm__ __volatile__( \
> + "mov.l %1, er0\n\t" \
> + "mov.l %2, er1\n\t" \
> + "mov.l %3, er2\n\t" \
> + "jsr @_resume\n\t" \
> + "mov.l er2,%0\n\t" \
> + : "=r" (_last) \
> + : "r" (&(prev->thread)), \
> + "r" (&(next->thread)), \
> + "g" (prev) \
> + : "cc", "er0", "er1", "er2", "er3"); \
> + (last) = _last; \
> +} while (0)
> +
> +#endif /* _H8300_SWITCH_TO_H */
> diff --git a/arch/h8300/include/asm/syscall.h b/arch/h8300/include/asm/syscall.h
> new file mode 100644
> index 0000000..b41f688
> --- /dev/null
> +++ b/arch/h8300/include/asm/syscall.h
> @@ -0,0 +1,56 @@
> +#ifndef __ASM_H8300_SYSCALLS_32_H
> +#define __ASM_H8300_SYSCALLS_32_H
> +
> +#ifdef __KERNEL__
> +
> +#include <linux/compiler.h>
> +#include <linux/linkage.h>
> +#include <linux/types.h>
> +#include <linux/ptrace.h>
> +
> +static inline int
> +syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
> +{
> + return regs->orig_er0;
> +}
> +
> +static inline void
> +syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
> + unsigned int i, unsigned int n, unsigned long *args)
> +{
> + BUG_ON(i + n > 6);
> +
> + while (n > 0) {
> + switch (i) {
> + case 0:
> + *args++ = regs->er1;
> + break;
> + case 1:
> + *args++ = regs->er2;
> + break;
> + case 2:
> + *args++ = regs->er3;
> + break;
> + case 3:
> + *args++ = regs->er4;
> + break;
> + case 4:
> + *args++ = regs->er5;
> + break;
> + case 5:
> + *args++ = regs->er6;
> + break;
> + }
> + i++;
> + n--;
> + }
> +}
> +
> +
> +
> +/* Misc syscall related bits */
> +asmlinkage long do_syscall_trace_enter(struct pt_regs *regs);
> +asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
> +
> +#endif /* __KERNEL__ */
> +#endif /* __ASM_H8300_SYSCALLS_32_H */
> diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
> new file mode 100644
> index 0000000..eded1ee
> --- /dev/null
> +++ b/arch/h8300/include/asm/thread_info.h
> @@ -0,0 +1,119 @@
> +/* thread_info.h: h8300 low-level thread information
> + * adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp>
> + *
> + * Copyright (C) 2002 David Howells (dhowells@redhat.com)
> + * - Incorporating suggestions made by Linus Torvalds and Dave Miller
> + */
> +
> +#ifndef _ASM_THREAD_INFO_H
> +#define _ASM_THREAD_INFO_H
> +
> +#include <asm/page.h>
> +
> +#ifdef __KERNEL__
> +
> +#ifndef __ASSEMBLY__
> +
> +/*
> + * low level task data.
> + * If you change this, change the TI_* offsets below to match.
> + */
> +struct thread_info {
> + struct task_struct *task; /* main task structure */
> + struct exec_domain *exec_domain; /* execution domain */
Same here, remove exec_domain.
> + unsigned long flags; /* low level flags */
> + int cpu; /* cpu we're on */
> + int preempt_count; /* 0 => preemptable, <0 => BUG */
> + struct restart_block restart_block;
> +};
> +
> +/*
> + * macros/functions for gaining access to the thread information structure
> + */
> +#define INIT_THREAD_INFO(tsk) \
> +{ \
> + .task = &tsk, \
> + .exec_domain = &default_exec_domain, \
> + .flags = 0, \
> + .cpu = 0, \
> + .preempt_count = INIT_PREEMPT_COUNT, \
> + .restart_block = { \
> + .fn = do_no_restart_syscall, \
> + }, \
> +}
> +
> +#define init_thread_info (init_thread_union.thread_info)
> +#define init_stack (init_thread_union.stack)
> +
> +
> +/*
> + * Size of kernel stack for each process. This must be a power of 2...
> + */
> +#define THREAD_SIZE_ORDER 1
> +#define THREAD_SIZE 8192 /* 2 pages */
> +
> +
> +/* how to get the thread information struct from C */
> +static inline struct thread_info *current_thread_info(void)
> +{
> + struct thread_info *ti;
> +
> + __asm__("mov.l sp, %0\n\t"
> + "and.w %1, %T0"
> + : "=&r"(ti)
> + : "i" (~(THREAD_SIZE-1) & 0xffff));
> + return ti;
> +}
> +
> +#endif /* __ASSEMBLY__ */
> +
> +/*
> + * Offsets in thread_info structure, used in assembly code
> + */
> +#define TI_TASK 0
> +#define TI_EXECDOMAIN 4
> +#define TI_FLAGS 8
> +#define TI_CPU 12
> +#define TI_PRE_COUNT 16
>
You can kill TI_EXECDOMAIN, execution domain support is gone.
It would be also nice if the TI_* constants would be created using
asm-offsets.c.
See git.kernel.org/linus/37f078ff4c97ad143a6dc2adae31e20a3f780ca7 as an example.
> +/*
> + * thread information flag bit numbers
> + */
> +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
> +#define TIF_SIGPENDING 1 /* signal pending */
> +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
> +#define TIF_SINGLESTEP 3 /* singlestepping active */
> +#define TIF_MEMDIE 4 /* is terminating due to OOM killer */
> +#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
> +#define TIF_NOTIFY_RESUME 6 /* callback before returning to user */
> +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */
> +#define TIF_SYSCALL_TRACEPOINT 8 /* for ftrace syscall instrumentation */
> +#define TIF_POLLING_NRFLAG 9 /* true if poll_idle() is polling TIF_NEED_RESCHED */
> +
> +/* as above, but as bit values */
> +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
> +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
> +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
> +#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
> +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
> +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
> +#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
> +#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
> +
> +/* work to do in syscall trace */
> +#define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
> + _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT)
> +
> +/* work to do on any return to u-space */
> +#define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \
> + _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \
> + _TIF_SINGLESTEP | _TIF_NOTIFY_RESUME | \
> + _TIF_SYSCALL_TRACEPOINT)
> +
> +/* work to do on interrupt/exception return */
> +#define _TIF_WORK_MASK (_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
> + _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
> +
> +#endif /* __KERNEL__ */
> +
> +#endif /* _ASM_THREAD_INFO_H */
> diff --git a/arch/h8300/include/asm/timer.h b/arch/h8300/include/asm/timer.h
> new file mode 100644
> index 0000000..c905f4e
> --- /dev/null
> +++ b/arch/h8300/include/asm/timer.h
> @@ -0,0 +1,31 @@
> +#ifndef __H8300_TIMER_H
> +#define __H8300_TIMER_H
> +
> +unsigned long get_cpu_clock(void);
> +
> +#define H8300_TIMER_FREQ get_cpu_clock() /* Timer input freq. */
> +
> +#define H8300_TMR8_CLKSRC 0
> +#define H8300_TMR8_CLKEVTDEV 1
> +
> +#define H8300_TMR8_DIV_8 0
> +#define H8300_TMR8_DIV_64 1
> +#define H8300_TMR8_DIV_8192 2
> +
> +struct h8300_timer8_config {
> + int mode;
> + int div;
> + int rating;
> +};
> +
> +struct h8300_timer16_config {
> + int rating;
> + __u8 enb;
> + __u8 imfa;
> + __u8 imiea;
> +};
> +
> +struct h8300_tpu_config {
> + int rating;
> +};
> +#endif
> diff --git a/arch/h8300/include/asm/tlb.h b/arch/h8300/include/asm/tlb.h
> new file mode 100644
> index 0000000..2c6fa4ee
> --- /dev/null
> +++ b/arch/h8300/include/asm/tlb.h
> @@ -0,0 +1,8 @@
> +#ifndef __H8300_TLB_H__
> +#define __H8300_TLB_H__
> +
> +#define tlb_flush(tlb) do { } while (0)
> +
> +#include <asm-generic/tlb.h>
> +
> +#endif
> diff --git a/arch/h8300/include/asm/topology.h b/arch/h8300/include/asm/topology.h
> new file mode 100644
> index 0000000..fdc1219
> --- /dev/null
> +++ b/arch/h8300/include/asm/topology.h
> @@ -0,0 +1,6 @@
> +#ifndef _ASM_H8300_TOPOLOGY_H
> +#define _ASM_H8300_TOPOLOGY_H
> +
> +#include <asm-generic/topology.h>
> +
> +#endif /* _ASM_H8300_TOPOLOGY_H */
> diff --git a/arch/h8300/include/asm/traps.h b/arch/h8300/include/asm/traps.h
> new file mode 100644
> index 0000000..aa34e75
> --- /dev/null
> +++ b/arch/h8300/include/asm/traps.h
> @@ -0,0 +1,41 @@
> +/*
> + * linux/include/asm-h8300/traps.h
> + *
> + * Copyright (C) 2003 Yoshinori Sato <ysato@users.sourceforge.jp>
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file COPYING in the main directory of this archive
> + * for more details.
> + */
> +
> +#ifndef _H8300_TRAPS_H
> +#define _H8300_TRAPS_H
> +
> +extern void _system_call(void);
> +extern void _interrupt_entry(void);
> +extern void _trace_break(void);
> +extern void _nmi(void);
> +extern void _interrupt_entry(void);
> +
> +extern unsigned long *_interrupt_redirect_table;
> +
> +#define JMP_OP 0x5a000000
> +#define JSR_OP 0x5e000000
> +#define VECTOR(address) ((JMP_OP)|((unsigned long)address))
> +#define REDIRECT(address) ((JSR_OP)|((unsigned long)address))
> +#define CPU_VECTOR ((unsigned long *)0x000000)
> +#define ADDR_MASK (0xffffff)
> +
> +#define TRACE_VEC 5
> +
> +#define TRAP0_VEC 8
> +#define TRAP1_VEC 9
> +#define TRAP2_VEC 10
> +#define TRAP3_VEC 11
> +
> +extern char _start, _etext;
> +#define check_kernel_text(addr) \
> + ((addr >= (unsigned long)(&_start)) && \
> + (addr < (unsigned long)(&_etext)))
> +
> +#endif /* _H8300_TRAPS_H */
> diff --git a/arch/h8300/include/asm/uaccess.h b/arch/h8300/include/asm/uaccess.h
> new file mode 100644
> index 0000000..a3b6b18
> --- /dev/null
> +++ b/arch/h8300/include/asm/uaccess.h
> @@ -0,0 +1,136 @@
> +#ifndef __H8300_UACCESS_H
> +#define __H8300_UACCESS_H
> +
> +/*
> + * User space memory access functions
> + */
> +#include <linux/sched.h>
> +#include <linux/mm.h>
> +#include <linux/string.h>
> +
> +#include <asm/segment.h>
> +
> +#define VERIFY_READ 0
> +#define VERIFY_WRITE 1
> +
> +/* We let the MMU do all checking */
> +#define access_ok(type, addr, size) __access_ok((unsigned long)addr, size)
> +static inline int __access_ok(unsigned long addr, unsigned long size)
> +{
> +#define RANGE_CHECK_OK(addr, size, lower, upper) \
> + (((addr) >= (lower)) && (((addr) + (size)) < (upper)))
> +
> + extern unsigned long memory_end;
> +
> + return RANGE_CHECK_OK(addr, size, 0L, memory_end);
> +}
> +
> +/*
> + * The exception table consists of pairs of addresses: the first is the
> + * address of an instruction that is allowed to fault, and the second is
> + * the address at which the program should continue. No registers are
> + * modified, so it is entirely up to the continuation code to figure out
> + * what to do.
> + *
> + * All the routines below use bits of fixup code that are out of line
> + * with the main instruction path. This means when everything is well,
> + * we don't even have to jump over them. Further, they do not intrude
> + * on our cache or tlb entries.
> + */
> +
> +struct exception_table_entry {
> + unsigned long insn, fixup;
> +};
> +
> +/* Returns 0 if exception not found and fixup otherwise. */
> +extern unsigned long search_exception_table(unsigned long);
> +
> +
> +/*
> + * These are the main single-value transfer routines. They automatically
> + * use the right size if we just have the right pointer type.
> + */
> +
> +#define put_user(x, ptr) \
> +({ \
> + int __pu_err = 0; \
> + typeof(*(ptr)) __pu_val = (x); \
> + switch (sizeof(*(ptr))) { \
> + case 1: \
> + /* falll through */ \
> + case 2: \
> + /* fall through */ \
> + case 4: \
> + *(ptr) = x; \
> + break; \
> + case 8: \
> + memcpy(ptr, &__pu_val, sizeof(*(ptr))); \
> + break; \
> + default: \
> + __pu_err = __put_user_bad(); \
> + break; \
> + } \
> + __pu_err; \
> +})
> +
> +#define __put_user(x, ptr) put_user(x, ptr)
> +
> +extern int __put_user_bad(void);
> +
> +/*
> + * Tell gcc we read from memory instead of writing: this is because
> + * we do not write to any memory gcc knows about, so there are no
> + * aliasing issues.
> + */
> +
> +#define __ptr(x) ((unsigned long *)(x))
> +
> +/*
> + * Tell gcc we read from memory instead of writing: this is because
> + * we do not write to any memory gcc knows about, so there are no
> + * aliasing issues.
> + */
> +
> +#define get_user(x, ptr) \
> +({ \
> + typeof(*(ptr)) __gu_val; \
> + int __gu_err = 0; \
> + switch (sizeof(*(ptr))) { \
> + case 1: \
> + *(u8 *)&__gu_val = *((u8 *)(ptr)); \
> + break; \
> + case 2: \
> + *(u16 *)&__gu_val = *((u16 *)ptr); \
> + break; \
> + case 4: \
> + *(u32 *)&__gu_val = *((u32 *)ptr); \
> + break; \
> + case 8: \
> + memcpy((void *)&__gu_val, ptr, sizeof(*(ptr))); \
> + break; \
> + default: \
> + __gu_err = __get_user_bad(); \
> + break; \
> + } \
> + (x) = (typeof(*(ptr)))__gu_val; \
> + __gu_err; \
> +})
> +#define __get_user(x, ptr) get_user(x, ptr)
> +
> +extern int __get_user_bad(void);
> +
> +#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
> +#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
> +
> +#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
> +#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
> +#define __copy_to_user_inatomic __copy_to_user
> +#define __copy_from_user_inatomic __copy_from_user
> +
> +unsigned long clear_user(void __user *addr, unsigned long size);
> +#define strnlen_user(s, n) (strnlen(s, n) + 1)
> +long strncpy_from_user(char *d, const char *s, long n);
> +
> +#define __clear_user clear_user
> +
> +#endif /* _H8300_UACCESS_H */
> diff --git a/arch/h8300/include/asm/unaligned.h b/arch/h8300/include/asm/unaligned.h
> new file mode 100644
> index 0000000..b8d06c7
> --- /dev/null
> +++ b/arch/h8300/include/asm/unaligned.h
> @@ -0,0 +1,11 @@
> +#ifndef _ASM_H8300_UNALIGNED_H
> +#define _ASM_H8300_UNALIGNED_H
> +
> +#include <linux/unaligned/be_memmove.h>
> +#include <linux/unaligned/le_byteshift.h>
> +#include <linux/unaligned/generic.h>
> +
> +#define get_unaligned __get_unaligned_be
> +#define put_unaligned __put_unaligned_be
> +
> +#endif /* _ASM_H8300_UNALIGNED_H */
> diff --git a/arch/h8300/include/asm/user.h b/arch/h8300/include/asm/user.h
> new file mode 100644
> index 0000000..2e3555f
> --- /dev/null
> +++ b/arch/h8300/include/asm/user.h
> @@ -0,0 +1,74 @@
> +#ifndef _H8300_USER_H
> +#define _H8300_USER_H
> +
> +#include <asm/page.h>
> +
> +/* Core file format: The core file is written in such a way that gdb
> + can understand it and provide useful information to the user (under
> + linux we use the 'trad-core' bfd). There are quite a number of
> + obstacles to being able to view the contents of the floating point
> + registers, and until these are solved you will not be able to view the
> + contents of them. Actually, you can read in the core file and look at
> + the contents of the user struct to find out what the floating point
> + registers contain.
> + The actual file contents are as follows:
> + UPAGE: 1 page consisting of a user struct that tells gdb what is present
> + in the file. Directly after this is a copy of the task_struct, which
> + is currently not used by gdb, but it may come in useful at some point.
> + All of the registers are stored as part of the upage. The upage should
> + always be only one page.
> + DATA: The data area is stored. We use current->end_text to
> + current->brk to pick up all of the user variables, plus any memory
> + that may have been malloced. No attempt is made to determine if a page
> + is demand-zero or if a page is totally unused, we just cover the entire
> + range. All of the addresses are rounded in such a way that an integral
> + number of pages is written.
> + STACK: We need the stack information in order to get a meaningful
> + backtrace. We need to write the data from (esp) to
> + current->start_stack, so we round each of these off in order to be able
> + to write an integer number of pages.
> + The minimum core file size is 3 pages, or 12288 bytes.
> +*/
> +
> +/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
> + is still the layout used by user (the new pt_regs doesn't have
> + all registers). */
> +struct user_regs_struct {
> + long er1, er2, er3, er4, er5, er6;
> + long er0;
> + long usp;
> + long orig_er0;
> + long ccr;
> + long pc;
> +};
> +
> +/* When the kernel dumps core, it starts by dumping the user struct -
> + this will be used by gdb to figure out where the data and stack segments
> + are within the file, and what virtual addresses to use. */
> +struct user {
> +/* We start with the registers, to mimic the way that "memory" is returned
> + from the ptrace(3,...) function. */
> + struct user_regs_struct regs; /* Where the registers are actually stored */
> +/* ptrace does not yet supply these. Someday.... */
> +/* The rest of this junk is to help gdb figure out what goes where */
> + unsigned long int u_tsize; /* Text segment size (pages). */
> + unsigned long int u_dsize; /* Data segment size (pages). */
> + unsigned long int u_ssize; /* Stack segment size (pages). */
> + unsigned long start_code; /* Starting virtual address of text. */
> + unsigned long start_stack; /* Starting virtual address of stack area.
> + This is actually the bottom of the stack,
> + the top of the stack is always found in the
> + esp register. */
> + long int signal; /* Signal that caused the core dump. */
> + int reserved; /* No longer used */
> + unsigned long u_ar0; /* Used by gdb to help find the values for */
> + /* the registers. */
> + unsigned long magic; /* To uniquely identify a core file */
> + char u_comm[32]; /* User command that was responsible */
> +};
> +#define NBPG PAGE_SIZE
> +#define UPAGES 1
> +#define HOST_TEXT_START_ADDR (u.start_code)
> +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
> +
> +#endif
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arch" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v8 01/17] h8300: Assembly headers.
2015-04-20 7:17 ` Richard Weinberger
@ 2015-04-20 7:47 ` Stephen Rothwell
2015-04-20 7:54 ` Richard Weinberger
2015-04-21 6:50 ` Yoshinori Sato
1 sibling, 1 reply; 26+ messages in thread
From: Stephen Rothwell @ 2015-04-20 7:47 UTC (permalink / raw)
To: Richard Weinberger; +Cc: Yoshinori Sato, LKML, Linux-Arch
[-- Attachment #1: Type: text/plain, Size: 354 bytes --]
Hi Richard,
On Mon, 20 Apr 2015 09:17:30 +0200 Richard Weinberger <richard.weinberger@gmail.com> wrote:
>
*tons removed*
Please edit quoted text in your replies down to the essentials. That
one was so large that I could not even find what you had commented
on. :-(
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v8 01/17] h8300: Assembly headers.
2015-04-20 7:47 ` Stephen Rothwell
@ 2015-04-20 7:54 ` Richard Weinberger
0 siblings, 0 replies; 26+ messages in thread
From: Richard Weinberger @ 2015-04-20 7:54 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: Yoshinori Sato, LKML, Linux-Arch
On Mon, Apr 20, 2015 at 9:47 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> Hi Richard,
>
> On Mon, 20 Apr 2015 09:17:30 +0200 Richard Weinberger <richard.weinberger@gmail.com> wrote:
>>
>
> *tons removed*
>
> Please edit quoted text in your replies down to the essentials. That
> one was so large that I could not even find what you had commented
> on. :-(
I'm sorry Stephen. Gmail hides such stuff from me.
I'll take more care next time.
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v8 01/17] h8300: Assembly headers.
2015-04-20 7:17 ` Richard Weinberger
2015-04-20 7:47 ` Stephen Rothwell
@ 2015-04-21 6:50 ` Yoshinori Sato
1 sibling, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-21 6:50 UTC (permalink / raw)
To: Richard Weinberger; +Cc: LKML, Linux-Arch
At Mon, 20 Apr 2015 09:17:30 +0200,
Richard Weinberger wrote:
>
> dOn Mon, Apr 20, 2015 at 8:13 AM, Yoshinori Sato
(snip)
> You can kill TI_EXECDOMAIN, execution domain support is gone.
> It would be also nice if the TI_* constants would be created using
> asm-offsets.c.
> See git.kernel.org/linus/37f078ff4c97ad143a6dc2adae31e20a3f780ca7 as an example.
>
OK.
Removed.
Thanks.
> --
> Thanks,
> //richard
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arch" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Yoshinori Sato
<ysato@users.sourceforge.jp>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v8 01/17] h8300: Assembly headers.
2015-04-20 6:13 ` [PATCH v8 01/17] h8300: Assembly headers Yoshinori Sato
2015-04-20 7:17 ` Richard Weinberger
@ 2015-04-20 7:44 ` Tobias Klauser
2015-04-21 8:28 ` Yoshinori Sato
2015-04-20 14:00 ` Tobias Klauser
2 siblings, 1 reply; 26+ messages in thread
From: Tobias Klauser @ 2015-04-20 7:44 UTC (permalink / raw)
To: Yoshinori Sato; +Cc: linux-kernel, linux-arch
On 2015-04-20 at 08:13:17 +0200, Yoshinori Sato <ysato@users.sourceforge.jp> wrote:
[...]
> diff --git a/arch/h8300/include/asm/elf.h b/arch/h8300/include/asm/elf.h
> new file mode 100644
> index 0000000..09031d0
> --- /dev/null
> +++ b/arch/h8300/include/asm/elf.h
> @@ -0,0 +1,101 @@
> +#ifndef __ASM_H8300_ELF_H
> +#define __ASM_H8300_ELF_H
> +
> +/*
> + * ELF register definitions..
> + */
> +
> +#include <asm/ptrace.h>
> +#include <asm/user.h>
> +
> +typedef unsigned long elf_greg_t;
> +
> +#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
> +typedef elf_greg_t elf_gregset_t[ELF_NGREG];
> +typedef unsigned long elf_fpregset_t;
> +
> +/*
> + * This is used to ensure we don't load something for the wrong architecture.
> + */
> +#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
EM_H8_300 is used here but only introduced in patch 15/17. Please change
the order of the patches such that the patch adding EM_H8_300 comes
before the ones using it.
> +
> +/*
> + * These are used to set parameters in the core dumps.
> + */
> +#define ELF_CLASS ELFCLASS32
> +#define ELF_DATA ELFDATA2MSB
> +#define ELF_ARCH EM_H8_300
It's used here again.
> +#if defined(CONFIG_CPU_H8300H)
> +#define ELF_CORE_EFLAGS 0x810000
> +#endif
> +#if defined(CONFIG_CPU_H8S)
> +#define ELF_CORE_EFLAGS 0x820000
> +#endif
> +
> +#define ELF_PLAT_INIT(_r) do { (_r)->er1 = 0; } while (0)
> +
> +#define ELF_EXEC_PAGESIZE 4096
> +
> +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
> + use of this is to invoke "./ld.so someprog" to test out a new version of
> + the loader. We need to make sure that it is out of the way of the program
> + that it will "exec", and that there is sufficient room for the brk. */
> +
> +#define ELF_ET_DYN_BASE 0xD0000000UL
> +
> +/* This yields a mask that user programs can use to figure out what
> + instruction set this cpu supports. */
> +
> +#define ELF_HWCAP (0)
> +
> +/* This yields a string that ld.so will use to load implementation
> + specific libraries for optimization. This is more specific in
> + intent than poking at uname or /proc/cpuinfo. */
> +
> +#define ELF_PLATFORM (NULL)
> +
> +#define R_H8_NONE 0
> +#define R_H8_DIR32 1
> +#define R_H8_DIR32_28 2
> +#define R_H8_DIR32_24 3
> +#define R_H8_DIR32_16 4
> +#define R_H8_DIR32U 6
> +#define R_H8_DIR32U_28 7
> +#define R_H8_DIR32U_24 8
> +#define R_H8_DIR32U_20 9
> +#define R_H8_DIR32U_16 10
> +#define R_H8_DIR24 11
> +#define R_H8_DIR24_20 12
> +#define R_H8_DIR24_16 13
> +#define R_H8_DIR24U 14
> +#define R_H8_DIR24U_20 15
> +#define R_H8_DIR24U_16 16
> +#define R_H8_DIR16 17
> +#define R_H8_DIR16U 18
> +#define R_H8_DIR16S_32 19
> +#define R_H8_DIR16S_28 20
> +#define R_H8_DIR16S_24 21
> +#define R_H8_DIR16S_20 22
> +#define R_H8_DIR16S 23
> +#define R_H8_DIR8 24
> +#define R_H8_DIR8U 25
> +#define R_H8_DIR8Z_32 26
> +#define R_H8_DIR8Z_28 27
> +#define R_H8_DIR8Z_24 28
> +#define R_H8_DIR8Z_20 29
> +#define R_H8_DIR8Z_16 30
> +#define R_H8_PCREL16 31
> +#define R_H8_PCREL8 32
> +#define R_H8_BPOS 33
> +#define R_H8_PCREL32 34
> +#define R_H8_GOT32O 35
> +#define R_H8_GOT16O 36
> +#define R_H8_DIR16A8 59
> +#define R_H8_DIR16R8 60
> +#define R_H8_DIR24A8 61
> +#define R_H8_DIR24R8 62
> +#define R_H8_DIR32A16 63
> +#define R_H8_ABS32 65
> +#define R_H8_ABS32A16 127
> +
> +#endif
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v8 01/17] h8300: Assembly headers.
2015-04-20 7:44 ` Tobias Klauser
@ 2015-04-21 8:28 ` Yoshinori Sato
0 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-21 8:28 UTC (permalink / raw)
To: Tobias Klauser; +Cc: linux-kernel, linux-arch
At Mon, 20 Apr 2015 09:44:46 +0200,
Tobias Klauser wrote:
>
> On 2015-04-20 at 08:13:17 +0200, Yoshinori Sato <ysato@users.sourceforge.jp> wrote:
> [...]
> > diff --git a/arch/h8300/include/asm/elf.h b/arch/h8300/include/asm/elf.h
> > new file mode 100644
> > index 0000000..09031d0
> > --- /dev/null
> > +++ b/arch/h8300/include/asm/elf.h
> > @@ -0,0 +1,101 @@
> > +#ifndef __ASM_H8300_ELF_H
> > +#define __ASM_H8300_ELF_H
> > +
> > +/*
> > + * ELF register definitions..
> > + */
> > +
> > +#include <asm/ptrace.h>
> > +#include <asm/user.h>
> > +
> > +typedef unsigned long elf_greg_t;
> > +
> > +#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
> > +typedef elf_greg_t elf_gregset_t[ELF_NGREG];
> > +typedef unsigned long elf_fpregset_t;
> > +
> > +/*
> > + * This is used to ensure we don't load something for the wrong architecture.
> > + */
> > +#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
>
> EM_H8_300 is used here but only introduced in patch 15/17. Please change
> the order of the patches such that the patch adding EM_H8_300 comes
> before the ones using it.
OK.
I will changes order next time.
> > +
> > +/*
> > + * These are used to set parameters in the core dumps.
> > + */
> > +#define ELF_CLASS ELFCLASS32
> > +#define ELF_DATA ELFDATA2MSB
> > +#define ELF_ARCH EM_H8_300
>
> It's used here again.
>
> > +#if defined(CONFIG_CPU_H8300H)
> > +#define ELF_CORE_EFLAGS 0x810000
> > +#endif
> > +#if defined(CONFIG_CPU_H8S)
> > +#define ELF_CORE_EFLAGS 0x820000
> > +#endif
> > +
> > +#define ELF_PLAT_INIT(_r) do { (_r)->er1 = 0; } while (0)
> > +
> > +#define ELF_EXEC_PAGESIZE 4096
> > +
> > +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
> > + use of this is to invoke "./ld.so someprog" to test out a new version of
> > + the loader. We need to make sure that it is out of the way of the program
> > + that it will "exec", and that there is sufficient room for the brk. */
> > +
> > +#define ELF_ET_DYN_BASE 0xD0000000UL
> > +
> > +/* This yields a mask that user programs can use to figure out what
> > + instruction set this cpu supports. */
> > +
> > +#define ELF_HWCAP (0)
> > +
> > +/* This yields a string that ld.so will use to load implementation
> > + specific libraries for optimization. This is more specific in
> > + intent than poking at uname or /proc/cpuinfo. */
> > +
> > +#define ELF_PLATFORM (NULL)
> > +
> > +#define R_H8_NONE 0
> > +#define R_H8_DIR32 1
> > +#define R_H8_DIR32_28 2
> > +#define R_H8_DIR32_24 3
> > +#define R_H8_DIR32_16 4
> > +#define R_H8_DIR32U 6
> > +#define R_H8_DIR32U_28 7
> > +#define R_H8_DIR32U_24 8
> > +#define R_H8_DIR32U_20 9
> > +#define R_H8_DIR32U_16 10
> > +#define R_H8_DIR24 11
> > +#define R_H8_DIR24_20 12
> > +#define R_H8_DIR24_16 13
> > +#define R_H8_DIR24U 14
> > +#define R_H8_DIR24U_20 15
> > +#define R_H8_DIR24U_16 16
> > +#define R_H8_DIR16 17
> > +#define R_H8_DIR16U 18
> > +#define R_H8_DIR16S_32 19
> > +#define R_H8_DIR16S_28 20
> > +#define R_H8_DIR16S_24 21
> > +#define R_H8_DIR16S_20 22
> > +#define R_H8_DIR16S 23
> > +#define R_H8_DIR8 24
> > +#define R_H8_DIR8U 25
> > +#define R_H8_DIR8Z_32 26
> > +#define R_H8_DIR8Z_28 27
> > +#define R_H8_DIR8Z_24 28
> > +#define R_H8_DIR8Z_20 29
> > +#define R_H8_DIR8Z_16 30
> > +#define R_H8_PCREL16 31
> > +#define R_H8_PCREL8 32
> > +#define R_H8_BPOS 33
> > +#define R_H8_PCREL32 34
> > +#define R_H8_GOT32O 35
> > +#define R_H8_GOT16O 36
> > +#define R_H8_DIR16A8 59
> > +#define R_H8_DIR16R8 60
> > +#define R_H8_DIR24A8 61
> > +#define R_H8_DIR24R8 62
> > +#define R_H8_DIR32A16 63
> > +#define R_H8_ABS32 65
> > +#define R_H8_ABS32A16 127
> > +
> > +#endif
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arch" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Yoshinori Sato
<ysato@users.sourceforge.jp>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v8 01/17] h8300: Assembly headers.
2015-04-20 6:13 ` [PATCH v8 01/17] h8300: Assembly headers Yoshinori Sato
2015-04-20 7:17 ` Richard Weinberger
2015-04-20 7:44 ` Tobias Klauser
@ 2015-04-20 14:00 ` Tobias Klauser
2015-04-21 8:32 ` Yoshinori Sato
2 siblings, 1 reply; 26+ messages in thread
From: Tobias Klauser @ 2015-04-20 14:00 UTC (permalink / raw)
To: Yoshinori Sato; +Cc: linux-kernel, linux-arch
On 2015-04-20 at 08:13:17 +0200, Yoshinori Sato <ysato@users.sourceforge.jp> wrote:
[...]
> diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h
> new file mode 100644
> index 0000000..8341db6
> --- /dev/null
> +++ b/arch/h8300/include/asm/pgtable.h
> @@ -0,0 +1,49 @@
> +#ifndef _H8300_PGTABLE_H
> +#define _H8300_PGTABLE_H
> +#include <asm-generic/pgtable-nopud.h>
> +#include <asm-generic/pgtable.h>
> +#define pgtable_cache_init() do { } while (0)
> +extern void paging_init(void);
> +#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
> +#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
> +#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
> +#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
> +#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
> +#define __swp_type(x) (0)
> +#define __swp_offset(x) (0)
> +#define __swp_entry(typ, off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
> +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
> +#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
> +#define kern_addr_valid(addr) (1)
> +#define pgprot_writecombine(prot) (prot)
> +#define pgprot_noncached pgprot_writecombine
> +
> +static inline int pte_file(pte_t pte) { return 0; }
No need to define pte_file() anymore, remap_file_pages(2) implementation
was replaced by emulation.
> +#define swapper_pg_dir ((pgd_t *) 0)
> +/*
> + * ZERO_PAGE is a global shared page that is always zero: used
> + * for zero-mapped memory areas etc..
> + */
> +#define ZERO_PAGE(vaddr) (virt_to_page(0))
> +
> +/*
> + * These would be in other places but having them here reduces the diffs.
> + */
> +extern unsigned int kobjsize(const void *objp);
This prototypes doesn't need to be defined here, it's already in
linux/mm.h which is included where kobjsize is used.
> +extern int is_in_rom(unsigned long);
This function is no longer defined nor used in the rest of the tree, no
need for this prototype as well.
[...]
> diff --git a/arch/h8300/include/asm/sh_bios.h b/arch/h8300/include/asm/sh_bios.h
> new file mode 100644
> index 0000000..9ce513c
> --- /dev/null
> +++ b/arch/h8300/include/asm/sh_bios.h
> @@ -0,0 +1,4 @@
> +#ifndef SH_BIOS_H
> +#define SH_BIOS_H
> +
> +#endif
Why this empty header? Can it be removed?
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v8 01/17] h8300: Assembly headers.
2015-04-20 14:00 ` Tobias Klauser
@ 2015-04-21 8:32 ` Yoshinori Sato
0 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-21 8:32 UTC (permalink / raw)
To: Tobias Klauser; +Cc: linux-kernel, linux-arch
At Mon, 20 Apr 2015 16:00:34 +0200,
Tobias Klauser wrote:
>
> On 2015-04-20 at 08:13:17 +0200, Yoshinori Sato <ysato@users.sourceforge.jp> wrote:
> [...]
> > diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h
> > new file mode 100644
> > index 0000000..8341db6
> > --- /dev/null
> > +++ b/arch/h8300/include/asm/pgtable.h
> > @@ -0,0 +1,49 @@
> > +#ifndef _H8300_PGTABLE_H
> > +#define _H8300_PGTABLE_H
> > +#include <asm-generic/pgtable-nopud.h>
> > +#include <asm-generic/pgtable.h>
> > +#define pgtable_cache_init() do { } while (0)
> > +extern void paging_init(void);
> > +#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
> > +#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
> > +#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
> > +#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
> > +#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
> > +#define __swp_type(x) (0)
> > +#define __swp_offset(x) (0)
> > +#define __swp_entry(typ, off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
> > +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
> > +#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
> > +#define kern_addr_valid(addr) (1)
> > +#define pgprot_writecombine(prot) (prot)
> > +#define pgprot_noncached pgprot_writecombine
> > +
> > +static inline int pte_file(pte_t pte) { return 0; }
>
> No need to define pte_file() anymore, remap_file_pages(2) implementation
> was replaced by emulation.
OK.
Remove it.
> > +#define swapper_pg_dir ((pgd_t *) 0)
> > +/*
> > + * ZERO_PAGE is a global shared page that is always zero: used
> > + * for zero-mapped memory areas etc..
> > + */
> > +#define ZERO_PAGE(vaddr) (virt_to_page(0))
> > +
> > +/*
> > + * These would be in other places but having them here reduces the diffs.
> > + */
> > +extern unsigned int kobjsize(const void *objp);
>
> This prototypes doesn't need to be defined here, it's already in
> linux/mm.h which is included where kobjsize is used.
OK.
> > +extern int is_in_rom(unsigned long);
>
> This function is no longer defined nor used in the rest of the tree, no
> need for this prototype as well.
>
OK.
Remove.
> [...]
> > diff --git a/arch/h8300/include/asm/sh_bios.h b/arch/h8300/include/asm/sh_bios.h
> > new file mode 100644
> > index 0000000..9ce513c
> > --- /dev/null
> > +++ b/arch/h8300/include/asm/sh_bios.h
> > @@ -0,0 +1,4 @@
> > +#ifndef SH_BIOS_H
> > +#define SH_BIOS_H
> > +
> > +#endif
>
> Why this empty header? Can it be removed?
It was necessary before, it's already unnecessary.
Removed.
Thanks.
--
Yoshinori Sato
<ysato@users.sourceforge.jp>
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v8 02/17] h8300: UAPI headers
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 01/17] h8300: Assembly headers Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 03/17] h8300: Exception and Interrupt handling Yoshinori Sato
` (14 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/include/uapi/asm/Kbuild | 29 ++++++++
arch/h8300/include/uapi/asm/auxvec.h | 4 ++
arch/h8300/include/uapi/asm/byteorder.h | 6 ++
arch/h8300/include/uapi/asm/ptrace.h | 42 +++++++++++
arch/h8300/include/uapi/asm/sigcontext.h | 18 +++++
arch/h8300/include/uapi/asm/signal.h | 115 +++++++++++++++++++++++++++++++
arch/h8300/include/uapi/asm/swab.h | 1 +
arch/h8300/include/uapi/asm/unistd.h | 3 +
8 files changed, 218 insertions(+)
create mode 100644 arch/h8300/include/uapi/asm/Kbuild
create mode 100644 arch/h8300/include/uapi/asm/auxvec.h
create mode 100644 arch/h8300/include/uapi/asm/byteorder.h
create mode 100644 arch/h8300/include/uapi/asm/ptrace.h
create mode 100644 arch/h8300/include/uapi/asm/sigcontext.h
create mode 100644 arch/h8300/include/uapi/asm/signal.h
create mode 100644 arch/h8300/include/uapi/asm/swab.h
create mode 100644 arch/h8300/include/uapi/asm/unistd.h
diff --git a/arch/h8300/include/uapi/asm/Kbuild b/arch/h8300/include/uapi/asm/Kbuild
new file mode 100644
index 0000000..077e720
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/Kbuild
@@ -0,0 +1,29 @@
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
+
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += kvm_para.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += param.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += resource.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += siginfo.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += statfs.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += unistd.h
diff --git a/arch/h8300/include/uapi/asm/auxvec.h b/arch/h8300/include/uapi/asm/auxvec.h
new file mode 100644
index 0000000..1d36fe38
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMH8300_AUXVEC_H
+#define __ASMH8300_AUXVEC_H
+
+#endif
diff --git a/arch/h8300/include/uapi/asm/byteorder.h b/arch/h8300/include/uapi/asm/byteorder.h
new file mode 100644
index 0000000..13539da
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/byteorder.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_BYTEORDER_H
+#define _H8300_BYTEORDER_H
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _H8300_BYTEORDER_H */
diff --git a/arch/h8300/include/uapi/asm/ptrace.h b/arch/h8300/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..e132670d
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/ptrace.h
@@ -0,0 +1,42 @@
+#ifndef _UAPI_H8300_PTRACE_H
+#define _UAPI_H8300_PTRACE_H
+
+#ifndef __ASSEMBLY__
+
+#define PT_ER1 0
+#define PT_ER2 1
+#define PT_ER3 2
+#define PT_ER4 3
+#define PT_ER5 4
+#define PT_ER6 5
+#define PT_ER0 6
+#define PT_USP 7
+#define PT_ORIG_ER0 8
+#define PT_CCR 9
+#define PT_PC 10
+#define PT_EXR 11
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+
+struct pt_regs {
+ long retpc;
+ long er4;
+ long er5;
+ long er6;
+ long er3;
+ long er2;
+ long er1;
+ long orig_er0;
+ long sp;
+ unsigned short ccr;
+ long er0;
+ long vector;
+#if defined(__H8300S__)
+ unsigned short exr;
+#endif
+ unsigned long pc;
+} __attribute__((aligned(2), packed));
+
+#endif /* __ASSEMBLY__ */
+#endif /* _UAPI_H8300_PTRACE_H */
diff --git a/arch/h8300/include/uapi/asm/sigcontext.h b/arch/h8300/include/uapi/asm/sigcontext.h
new file mode 100644
index 0000000..c41fdaa
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/sigcontext.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_H8300_SIGCONTEXT_H
+#define _ASM_H8300_SIGCONTEXT_H
+
+struct sigcontext {
+ unsigned long sc_mask; /* old sigmask */
+ unsigned long sc_usp; /* old user stack pointer */
+ unsigned long sc_er0;
+ unsigned long sc_er1;
+ unsigned long sc_er2;
+ unsigned long sc_er3;
+ unsigned long sc_er4;
+ unsigned long sc_er5;
+ unsigned long sc_er6;
+ unsigned short sc_ccr;
+ unsigned long sc_pc;
+};
+
+#endif
diff --git a/arch/h8300/include/uapi/asm/signal.h b/arch/h8300/include/uapi/asm/signal.h
new file mode 100644
index 0000000..af3a6c3
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/signal.h
@@ -0,0 +1,115 @@
+#ifndef _UAPI_H8300_SIGNAL_H
+#define _UAPI_H8300_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+#define SA_RESTORER 0x04000000
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal-defs.h>
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+
+#endif /* _UAPI_H8300_SIGNAL_H */
diff --git a/arch/h8300/include/uapi/asm/swab.h b/arch/h8300/include/uapi/asm/swab.h
new file mode 100644
index 0000000..7847e56
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/swab.h
@@ -0,0 +1 @@
+#include <asm-generic/swab.h>
diff --git a/arch/h8300/include/uapi/asm/unistd.h b/arch/h8300/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..7a2eb69
--- /dev/null
+++ b/arch/h8300/include/uapi/asm/unistd.h
@@ -0,0 +1,3 @@
+#define __ARCH_NOMMU
+
+#include <asm-generic/unistd.h>
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 03/17] h8300: Exception and Interrupt handling
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 01/17] h8300: Assembly headers Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 02/17] h8300: UAPI headers Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 04/17] h8300: kernel booting Yoshinori Sato
` (13 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
h8300 exception entry and exception / interrupt handling
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/kernel/entry.S | 414 ++++++++++++++++++++++++++++++++++++++++++++++
arch/h8300/kernel/irq.c | 100 +++++++++++
arch/h8300/kernel/traps.c | 161 ++++++++++++++++++
3 files changed, 675 insertions(+)
create mode 100644 arch/h8300/kernel/entry.S
create mode 100644 arch/h8300/kernel/irq.c
create mode 100644 arch/h8300/kernel/traps.c
diff --git a/arch/h8300/kernel/entry.S b/arch/h8300/kernel/entry.S
new file mode 100644
index 0000000..797dfa8
--- /dev/null
+++ b/arch/h8300/kernel/entry.S
@@ -0,0 +1,414 @@
+/*
+ *
+ * linux/arch/h8300/kernel/entry.S
+ *
+ * Yoshinori Sato <ysato@users.sourceforge.jp>
+ * David McCullough <davidm@snapgear.com>
+ *
+ */
+
+/*
+ * entry.S
+ * include exception/interrupt gateway
+ * system call entry
+ */
+
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+
+#if defined(CONFIG_CPU_H8300H)
+#define USERRET 8
+INTERRUPTS = 64
+ .h8300h
+ .macro SHLL2 reg
+ shll.l \reg
+ shll.l \reg
+ .endm
+ .macro SHLR2 reg
+ shlr.l \reg
+ shlr.l \reg
+ .endm
+ .macro SAVEREGS
+ mov.l er0,@-sp
+ mov.l er1,@-sp
+ mov.l er2,@-sp
+ mov.l er3,@-sp
+ .endm
+ .macro RESTOREREGS
+ mov.l @sp+,er3
+ mov.l @sp+,er2
+ .endm
+ .macro SAVEEXR
+ .endm
+ .macro RESTOREEXR
+ .endm
+#endif
+#if defined(CONFIG_CPU_H8S)
+#define USERRET 10
+#define USEREXR 8
+INTERRUPTS = 128
+ .h8300s
+ .macro SHLL2 reg
+ shll.l #2,\reg
+ .endm
+ .macro SHLR2 reg
+ shlr.l #2,\reg
+ .endm
+ .macro SAVEREGS
+ stm.l er0-er3,@-sp
+ .endm
+ .macro RESTOREREGS
+ ldm.l @sp+,er2-er3
+ .endm
+ .macro SAVEEXR
+ mov.w @(USEREXR:16,er0),r1
+ mov.w r1,@(LEXR-LER3:16,sp) /* copy EXR */
+ .endm
+ .macro RESTOREEXR
+ mov.w @(LEXR-LER1:16,sp),r1 /* restore EXR */
+ mov.b r1l,r1h
+ mov.w r1,@(USEREXR:16,er0)
+ .endm
+#endif
+
+
+/* CPU context save/restore macros. */
+
+ .macro SAVE_ALL
+ mov.l er0,@-sp
+ stc ccr,r0l /* check kernel mode */
+ btst #4,r0l
+ bne 5f
+
+ /* user mode */
+ mov.l sp,@_sw_usp
+ mov.l @sp,er0 /* restore saved er0 */
+ orc #0x10,ccr /* switch kernel stack */
+ mov.l @_sw_ksp,sp
+ sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */
+ SAVEREGS
+ mov.l @_sw_usp,er0
+ mov.l @(USERRET:16,er0),er1 /* copy the RET addr */
+ mov.l er1,@(LRET-LER3:16,sp)
+ SAVEEXR
+
+ mov.l @(LORIG-LER3:16,sp),er0
+ mov.l er0,@(LER0-LER3:16,sp) /* copy ER0 */
+ mov.w e1,r1 /* e1 highbyte = ccr */
+ and #0xef,r1h /* mask mode? flag */
+ bra 6f
+5:
+ /* kernel mode */
+ mov.l @sp,er0 /* restore saved er0 */
+ subs #2,sp /* set dummy ccr */
+ subs #4,sp /* set dummp sp */
+ SAVEREGS
+ mov.w @(LRET-LER3:16,sp),r1 /* copy old ccr */
+6:
+ mov.b r1h,r1l
+ mov.b #0,r1h
+ mov.w r1,@(LCCR-LER3:16,sp) /* set ccr */
+ mov.l @_sw_usp,er2
+ mov.l er2,@(LSP-LER3:16,sp) /* set usp */
+ mov.l er6,@-sp /* syscall arg #6 */
+ mov.l er5,@-sp /* syscall arg #5 */
+ mov.l er4,@-sp /* syscall arg #4 */
+ .endm /* r1 = ccr */
+
+ .macro RESTORE_ALL
+ mov.l @sp+,er4
+ mov.l @sp+,er5
+ mov.l @sp+,er6
+ RESTOREREGS
+ mov.w @(LCCR-LER1:16,sp),r0 /* check kernel mode */
+ btst #4,r0l
+ bne 7f
+
+ orc #0xc0,ccr
+ mov.l @(LSP-LER1:16,sp),er0
+ mov.l @(LER0-LER1:16,sp),er1 /* restore ER0 */
+ mov.l er1,@er0
+ RESTOREEXR
+ mov.w @(LCCR-LER1:16,sp),r1 /* restore the RET addr */
+ mov.b r1l,r1h
+ mov.b @(LRET+1-LER1:16,sp),r1l
+ mov.w r1,e1
+ mov.w @(LRET+2-LER1:16,sp),r1
+ mov.l er1,@(USERRET:16,er0)
+
+ mov.l @sp+,er1
+ add.l #(LRET-LER1),sp /* remove LORIG - LRET */
+ mov.l sp,@_sw_ksp
+ andc #0xef,ccr /* switch to user mode */
+ mov.l er0,sp
+ bra 8f
+7:
+ mov.l @sp+,er1
+ add.l #10,sp
+8:
+ mov.l @sp+,er0
+ adds #4,sp /* remove the sw created LVEC */
+ rte
+ .endm
+
+.globl _system_call
+.globl ret_from_exception
+.globl ret_from_fork
+.globl ret_from_kernel_thread
+.globl ret_from_interrupt
+.globl _interrupt_redirect_table
+.globl _sw_ksp,_sw_usp
+.globl _resume
+.globl _interrupt_entry
+.globl _trace_break
+.globl _nmi
+
+#if defined(CONFIG_ROMKERNEL)
+ .section .int_redirect,"ax"
+_interrupt_redirect_table:
+#if defined(CONFIG_CPU_H8300H)
+ .rept 7
+ .long 0
+ .endr
+#endif
+#if defined(CONFIG_CPU_H8S)
+ .rept 5
+ .long 0
+ .endr
+ jmp @_trace_break
+ .long 0
+#endif
+
+ jsr @_interrupt_entry /* NMI */
+ jmp @_system_call /* TRAPA #0 (System call) */
+ .long 0
+ .long 0
+ jmp @_trace_break /* TRAPA #3 (breakpoint) */
+ .rept INTERRUPTS-12
+ jsr @_interrupt_entry
+ .endr
+#endif
+#if defined(CONFIG_RAMKERNEL)
+.globl _interrupt_redirect_table
+ .section .bss
+_interrupt_redirect_table:
+ .space 4
+#endif
+
+ .section .text
+ .align 2
+_interrupt_entry:
+ SAVE_ALL
+/* r1l is saved ccr */
+ mov.l sp,er0
+ add.l #LVEC,er0
+ btst #4,r1l
+ bne 1f
+ /* user LVEC */
+ mov.l @_sw_usp,er0
+ adds #4,er0
+1:
+ mov.l @er0,er0 /* LVEC address */
+#if defined(CONFIG_ROMKERNEL)
+ sub.l #_interrupt_redirect_table,er0
+#endif
+#if defined(CONFIG_RAMKERNEL)
+ mov.l @_interrupt_redirect_table,er1
+ sub.l er1,er0
+#endif
+ SHLR2 er0
+ dec.l #1,er0
+ mov.l sp,er1
+ subs #4,er1 /* adjust ret_pc */
+#if defined(CONFIG_CPU_H8S)
+ orc #7,exr
+#endif
+ jsr @do_IRQ
+ jmp @ret_from_interrupt
+
+_system_call:
+ subs #4,sp /* dummy LVEC */
+ SAVE_ALL
+ /* er0: syscall nr */
+ andc #0xbf,ccr
+ mov.l er0,er4
+
+ /* save top of frame */
+ mov.l sp,er0
+ jsr @set_esp0
+ mov.l sp,er2
+ and.w #0xe000,r2
+ mov.l @(TI_FLAGS:16,er2),er2
+ and.w #_TIF_WORK_SYSCALL_MASK,r2
+ beq 1f
+ mov.l sp,er0
+ jsr @do_syscall_trace_enter
+1:
+ cmp.l #__NR_syscalls,er4
+ bcc badsys
+ SHLL2 er4
+ mov.l #_sys_call_table,er0
+ add.l er4,er0
+ mov.l @er0,er4
+ beq ret_from_exception:16
+ mov.l @(LER1:16,sp),er0
+ mov.l @(LER2:16,sp),er1
+ mov.l @(LER3:16,sp),er2
+ jsr @er4
+ mov.l er0,@(LER0:16,sp) /* save the return value */
+ mov.l sp,er2
+ and.w #0xe000,r2
+ mov.l @(TI_FLAGS:16,er2),er2
+ and.w #_TIF_WORK_SYSCALL_MASK,r2
+ beq 2f
+ mov.l sp,er0
+ jsr @do_syscall_trace_leave
+2:
+ orc #0xc0,ccr
+ bra resume_userspace
+
+badsys:
+ mov.l #-ENOSYS,er0
+ mov.l er0,@(LER0:16,sp)
+ bra resume_userspace
+
+#if !defined(CONFIG_PREEMPT)
+#define resume_kernel restore_all
+#endif
+
+ret_from_exception:
+#if defined(CONFIG_PREEMPT)
+ orc #0xc0,ccr
+#endif
+ret_from_interrupt:
+ mov.b @(LCCR+1:16,sp),r0l
+ btst #4,r0l
+ bne resume_kernel:16 /* return from kernel */
+resume_userspace:
+ andc #0xbf,ccr
+ mov.l sp,er4
+ and.w #0xe000,r4 /* er4 <- current thread info */
+ mov.l @(TI_FLAGS:16,er4),er1
+ and.l #_TIF_WORK_MASK,er1
+ beq restore_all:8
+work_pending:
+ btst #TIF_NEED_RESCHED,r1l
+ bne work_resched:8
+ /* work notifysig */
+ mov.l sp,er0
+ subs #4,er0 /* er0: pt_regs */
+ jsr @do_notify_resume
+ bra resume_userspace:8
+work_resched:
+ mov.l sp,er0
+ jsr @set_esp0
+ jsr @schedule
+ bra resume_userspace:8
+restore_all:
+ RESTORE_ALL /* Does RTE */
+
+#if defined(CONFIG_PREEMPT)
+resume_kernel:
+ mov.l @(TI_PRE_COUNT:16,er4),er0
+ bne restore_all:8
+need_resched:
+ mov.l @(TI_FLAGS:16,er4),er0
+ btst #TIF_NEED_RESCHED,r0l
+ beq restore_all:8
+ mov.b @(LCCR+1:16,sp),r0l /* Interrupt Enabled? */
+ bmi restore_all:8
+ mov.l sp,er0
+ jsr @set_esp0
+ jsr @preempt_schedule_irq
+ bra need_resched:8
+#endif
+
+ret_from_fork:
+ mov.l er2,er0
+ jsr @schedule_tail
+ jmp @ret_from_exception
+
+ret_from_kernel_thread:
+ mov.l er2,er0
+ jsr @schedule_tail
+ mov.l @(LER4:16,sp),er0
+ mov.l @(LER5:16,sp),er1
+ jsr @er1
+ jmp @ret_from_exception
+
+_resume:
+ /*
+ * Beware - when entering resume, offset of tss is in d1,
+ * prev (the current task) is in a0, next (the new task)
+ * is in a1 and d2.b is non-zero if the mm structure is
+ * shared between the tasks, so don't change these
+ * registers until their contents are no longer needed.
+ */
+
+ /* save sr */
+ sub.w r3,r3
+ stc ccr,r3l
+ mov.w r3,@(THREAD_CCR+2:16,er0)
+
+ /* disable interrupts */
+ orc #0xc0,ccr
+ mov.l @_sw_usp,er3
+ mov.l er3,@(THREAD_USP:16,er0)
+ mov.l sp,@(THREAD_KSP:16,er0)
+
+ /* Skip address space switching if they are the same. */
+ /* FIXME: what did we hack out of here, this does nothing! */
+
+ mov.l @(THREAD_USP:16,er1),er0
+ mov.l er0,@_sw_usp
+ mov.l @(THREAD_KSP:16,er1),sp
+
+ /* restore status register */
+ mov.w @(THREAD_CCR+2:16,er1),r3
+
+ ldc r3l,ccr
+ rts
+
+_trace_break:
+ subs #4,sp
+ SAVE_ALL
+ sub.l er1,er1
+ dec.l #1,er1
+ mov.l er1,@(LORIG,sp)
+ mov.l sp,er0
+ jsr @set_esp0
+ mov.l @_sw_usp,er0
+ mov.l @er0,er1
+ mov.w @(-2:16,er1),r2
+ cmp.w #0x5730,r2
+ beq 1f
+ subs #2,er1
+ mov.l er1,@er0
+1:
+ and.w #0xff,e1
+ mov.l er1,er0
+ jsr @trace_trap
+ jmp @ret_from_exception
+
+_nmi:
+ subs #4, sp
+ mov.l er0, @-sp
+ mov.l @_interrupt_redirect_table, er0
+ add.l #8*4, er0
+ mov.l er0, @(4,sp)
+ mov.l @sp+, er0
+ jmp @_interrupt_entry
+
+ .section .bss
+_sw_ksp:
+ .space 4
+_sw_usp:
+ .space 4
+
+ .end
diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c
new file mode 100644
index 0000000..56adef5
--- /dev/null
+++ b/arch/h8300/kernel/irq.c
@@ -0,0 +1,100 @@
+/*
+ * linux/arch/h8300/kernel/irq.c
+ *
+ * Copyright 2014 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/traps.h>
+
+#ifdef CONFIG_RAMKERNEL
+typedef void (*h8300_vector)(void);
+
+static const h8300_vector __initconst trap_table[] = {
+ 0, 0, 0, 0,
+ _trace_break,
+ 0, 0,
+ _nmi,
+ _system_call,
+ 0, 0,
+ _trace_break,
+};
+
+static unsigned long __init *get_vector_address(void)
+{
+ unsigned long *rom_vector = CPU_VECTOR;
+ unsigned long base, tmp;
+ int vec_no;
+
+ base = rom_vector[EXT_IRQ0] & ADDR_MASK;
+
+ /* check romvector format */
+ for (vec_no = EXT_IRQ0 + 1; vec_no <= EXT_IRQ0+EXT_IRQS; vec_no++) {
+ if ((base+(vec_no - EXT_IRQ0)*4) !=
+ (rom_vector[vec_no] & ADDR_MASK))
+ return NULL;
+ }
+
+ /* ramvector base address */
+ base -= EXT_IRQ0*4;
+
+ /* writerble? */
+ tmp = ~(*(volatile unsigned long *)base);
+ (*(volatile unsigned long *)base) = tmp;
+ if ((*(volatile unsigned long *)base) != tmp)
+ return NULL;
+ return (unsigned long *)base;
+}
+
+static void __init setup_vector(void)
+{
+ int i;
+ unsigned long *ramvec, *ramvec_p;
+ const h8300_vector *trap_entry;
+
+ ramvec = get_vector_address();
+ if (ramvec == NULL)
+ panic("interrupt vector serup failed.");
+ else
+ pr_debug("virtual vector at 0x%p\n", ramvec);
+
+ /* create redirect table */
+ ramvec_p = ramvec;
+ trap_entry = trap_table;
+ for (i = 0; i < NR_IRQS; i++) {
+ if (i < 12) {
+ if (*trap_entry)
+ *ramvec_p = VECTOR(*trap_entry);
+ ramvec_p++;
+ trap_entry++;
+ } else
+ *ramvec_p++ = REDIRECT(_interrupt_entry);
+ }
+ _interrupt_redirect_table = ramvec;
+}
+#else
+void setup_vector(void)
+{
+ /* noting do */
+}
+#endif
+
+void __init init_IRQ(void)
+{
+ int c;
+
+ setup_vector();
+ h8300_init_ipr();
+
+ for (c = 0; c < NR_IRQS; c++)
+ irq_set_chip_and_handler(c, &IRQ_CHIP, handle_simple_irq);
+}
+
+asmlinkage void do_IRQ(int irq)
+{
+ irq_enter();
+ generic_handle_irq(irq);
+ irq_exit();
+}
diff --git a/arch/h8300/kernel/traps.c b/arch/h8300/kernel/traps.c
new file mode 100644
index 0000000..1b2d7cd
--- /dev/null
+++ b/arch/h8300/kernel/traps.c
@@ -0,0 +1,161 @@
+/*
+ * linux/arch/h8300/boot/traps.c -- general exception handling code
+ * H8/300 support Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * Cloned from Linux/m68k.
+ *
+ * No original Copyright holder listed,
+ * Probable original (C) Roman Zippel (assigned DJD, 1999)
+ *
+ * Copyright 1999-2000 D. Jeff Dionne, <jeff@rt-control.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/bug.h>
+
+#include <asm/irq.h>
+#include <asm/traps.h>
+#include <asm/page.h>
+
+static DEFINE_SPINLOCK(die_lock);
+
+/*
+ * this must be called very early as the kernel might
+ * use some instruction that are emulated on the 060
+ */
+
+void __init base_trap_init(void)
+{
+}
+
+void __init trap_init(void)
+{
+}
+
+asmlinkage void set_esp0(unsigned long ssp)
+{
+ current->thread.esp0 = ssp;
+}
+
+/*
+ * Generic dumping code. Used for panic and debug.
+ */
+
+static void dump(struct pt_regs *fp)
+{
+ unsigned long *sp;
+ unsigned char *tp;
+ int i;
+
+ pr_info("\nCURRENT PROCESS:\n\n");
+ pr_info("COMM=%s PID=%d\n", current->comm, current->pid);
+ if (current->mm) {
+ pr_info("TEXT=%08x-%08x DATA=%08x-%08x BSS=%08x-%08x\n",
+ (int) current->mm->start_code,
+ (int) current->mm->end_code,
+ (int) current->mm->start_data,
+ (int) current->mm->end_data,
+ (int) current->mm->end_data,
+ (int) current->mm->brk);
+ pr_info("USER-STACK=%08x KERNEL-STACK=%08lx\n\n",
+ (int) current->mm->start_stack,
+ (int) PAGE_SIZE+(unsigned long)current);
+ }
+
+ show_regs(fp);
+ pr_info("\nCODE:");
+ tp = ((unsigned char *) fp->pc) - 0x20;
+ for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) {
+ if ((i % 0x10) == 0)
+ pr_info("\n%08x: ", (int) (tp + i));
+ pr_info("%08x ", (int) *sp++);
+ }
+ pr_info("\n");
+
+ pr_info("\nKERNEL STACK:");
+ tp = ((unsigned char *) fp) - 0x40;
+ for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
+ if ((i % 0x10) == 0)
+ pr_info("\n%08x: ", (int) (tp + i));
+ pr_info("%08x ", (int) *sp++);
+ }
+ pr_info("\n");
+ if (STACK_MAGIC != *(unsigned long *)((unsigned long)current+PAGE_SIZE))
+ pr_info("(Possibly corrupted stack page??)\n");
+
+ pr_info("\n\n");
+}
+
+void die(const char *str, struct pt_regs *fp, unsigned long err)
+{
+ static int diecount;
+
+ oops_enter();
+
+ console_verbose();
+ spin_lock_irq(&die_lock);
+ report_bug(fp->pc, fp);
+ pr_crit("%s: %04lx [#%d] ", str, err & 0xffff, ++diecount);
+ dump(fp);
+
+ spin_unlock_irq(&die_lock);
+ do_exit(SIGSEGV);
+}
+
+static int kstack_depth_to_print = 24;
+
+void show_stack(struct task_struct *task, unsigned long *esp)
+{
+ unsigned long *stack, addr;
+ int i;
+
+ if (esp == NULL)
+ esp = (unsigned long *) &esp;
+
+ stack = esp;
+
+ pr_info("Stack from %08lx:", (unsigned long)stack);
+ for (i = 0; i < kstack_depth_to_print; i++) {
+ if (((unsigned long)stack & (THREAD_SIZE - 1)) == 0)
+ break;
+ if (i % 8 == 0)
+ pr_info("\n ");
+ pr_info(" %08lx", *stack++);
+ }
+
+ pr_info("\nCall Trace:");
+ i = 0;
+ stack = esp;
+ while (((unsigned long)stack & (THREAD_SIZE - 1)) != 0) {
+ addr = *stack++;
+ /*
+ * If the address is either in the text segment of the
+ * kernel, or in the region which contains vmalloc'ed
+ * memory, it *may* be the address of a calling
+ * routine; if so, print it so that someone tracing
+ * down the cause of the crash will be able to figure
+ * out the call path that was taken.
+ */
+ if (check_kernel_text(addr)) {
+ if (i % 4 == 0)
+ pr_info("\n ");
+ pr_info(" [<%08lx>]", addr);
+ i++;
+ }
+ }
+ pr_info("\n");
+}
+
+void show_trace_task(struct task_struct *tsk)
+{
+ show_stack(tsk, (unsigned long *)tsk->thread.esp0);
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 04/17] h8300: kernel booting
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (2 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 03/17] h8300: Exception and Interrupt handling Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 05/17] h8300: process and signals Yoshinori Sato
` (12 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
zImage startup / kernel entry point / arch depend startup
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/boot/Makefile | 26 +++++
arch/h8300/boot/compressed/Makefile | 37 +++++++
arch/h8300/boot/compressed/head.S | 48 +++++++++
arch/h8300/boot/compressed/misc.c | 74 ++++++++++++++
arch/h8300/boot/compressed/vmlinux.lds | 32 ++++++
arch/h8300/boot/compressed/vmlinux.scr | 9 ++
arch/h8300/kernel/head_ram.S | 60 ++++++++++++
arch/h8300/kernel/head_rom.S | 108 ++++++++++++++++++++
arch/h8300/kernel/setup.c | 174 +++++++++++++++++++++++++++++++++
9 files changed, 568 insertions(+)
create mode 100644 arch/h8300/boot/Makefile
create mode 100644 arch/h8300/boot/compressed/Makefile
create mode 100644 arch/h8300/boot/compressed/head.S
create mode 100644 arch/h8300/boot/compressed/misc.c
create mode 100644 arch/h8300/boot/compressed/vmlinux.lds
create mode 100644 arch/h8300/boot/compressed/vmlinux.scr
create mode 100644 arch/h8300/kernel/head_ram.S
create mode 100644 arch/h8300/kernel/head_rom.S
create mode 100644 arch/h8300/kernel/setup.c
diff --git a/arch/h8300/boot/Makefile b/arch/h8300/boot/Makefile
new file mode 100644
index 0000000..2f6393a
--- /dev/null
+++ b/arch/h8300/boot/Makefile
@@ -0,0 +1,26 @@
+# arch/h8300/boot/Makefile
+
+targets := vmlinux.srec vmlinux.bin zImage
+subdir- := compressed
+
+OBJCOPYFLAGS_vmlinux.srec := -Osrec
+OBJCOPYFLAGS_vmlinux.bin := -Obinary
+OBJCOPYFLAGS_zImage := -O binary -R .note -R .comment -R .stab -R .stabstr -S
+
+UIMAGE_LOADADDR = $(CONFIG_RAMBASE)
+UIMAGE_ENTRYADDR = $(shell /bin/bash -c 'printf "0x%08x" \
+ $$[$(CONFIG_RAMBASE) + $(CONFIG_OFFSET)]')
+
+$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/compressed/vmlinux: FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
+$(obj)/uImage.bin: $(obj)/vmlinux.bin
+ $(call if_changed,uimage,none)
+
+CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec arch/$(ARCH)/uImage.bin
diff --git a/arch/h8300/boot/compressed/Makefile b/arch/h8300/boot/compressed/Makefile
new file mode 100644
index 0000000..87d03b7
--- /dev/null
+++ b/arch/h8300/boot/compressed/Makefile
@@ -0,0 +1,37 @@
+#
+# linux/arch/sh/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
+
+OBJECTS = $(obj)/head.o $(obj)/misc.o
+
+#
+# IMAGE_OFFSET is the load offset of the compression loader
+# Assign dummy values if these 2 variables are not defined,
+# in order to suppress error message.
+#
+CONFIG_MEMORY_START ?= 0x00400000
+CONFIG_BOOT_LINK_OFFSET ?= 0x00140000
+IMAGE_OFFSET := $(shell printf "0x%08x" $$(($(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET))))
+
+LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300-linux -T
+OBJCOPYFLAGS := -O binary
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,ld)
diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S
new file mode 100644
index 0000000..74c0d8cc
--- /dev/null
+++ b/arch/h8300/boot/compressed/head.S
@@ -0,0 +1,48 @@
+/*
+ * linux/arch/h8300/boot/compressed/head.S
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ */
+
+#include <linux/linkage.h>
+
+ .section .text..startup,"ax"
+ .global startup
+startup:
+ mov.l er0, er4
+ mov.l er0, sp
+ mov.l #__sbss, er0
+ mov.l #__ebss, er1
+ sub.l er0, er1
+ shlr er1
+ shlr er1
+ sub.l er2, er2
+1:
+ mov.l er2, @er0
+ adds #4, er0
+ dec.l #1, er1
+ bne 1b
+ jsr @decompress_kernel
+ mov.l er4, er0
+ jmp @0x400000
+
+ .align 9
+fake_headers_as_bzImage:
+ .word 0
+ .ascii "HdrS" ; header signature
+ .word 0x0202 ; header version number (>= 0x0105)
+ ; or else old loadlin-1.5 will fail)
+ .word 0 ; default_switch
+ .word 0 ; SETUPSEG
+ .word 0x1000
+ .word 0 ; pointing to kernel version string
+ .byte 0 ; = 0, old one (LILO, Loadlin,
+ ; 0xTV: T=0 for LILO
+ ; V = version
+ .byte 1 ; Load flags bzImage=1
+ .word 0x8000 ; size to move, when setup is not
+ .long 0x100000 ; 0x100000 = default for big kernel
+ .long 0 ; address of loaded ramdisk image
+ .long 0 ; its size in bytes
+
+ .end
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
new file mode 100644
index 0000000..7042741
--- /dev/null
+++ b/arch/h8300/boot/compressed/misc.c
@@ -0,0 +1,74 @@
+/*
+ * arch/h8300/boot/compressed/misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ *
+ * Adapted for h8300 by Yoshinori Sato 2006
+ */
+
+#include <asm/uaccess.h>
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+#undef memset
+#undef memcpy
+#define memzero(s, n) memset((s), (0), (n))
+
+extern int _end;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
+
+extern char input_data[];
+extern int input_len;
+static unsigned char *output;
+
+#define HEAP_SIZE 0x10000
+
+#include "../../../../lib/decompress_inflate.c"
+
+void *memset(void *s, int c, size_t n)
+{
+ int i;
+ char *ss = (char *)s;
+
+ for (i = 0; i < n; i++)
+ ss[i] = c;
+ return s;
+}
+
+void *memcpy(void *dest, const void *src, size_t n)
+{
+ int i;
+ char *d = (char *)dest, *s = (char *)src;
+
+ for (i = 0; i < n; i++)
+ d[i] = s[i];
+ return dest;
+}
+
+static void error(char *x)
+{
+
+ while (1)
+ ; /* Halt */
+}
+
+#define STACK_SIZE (4096)
+long user_stack[STACK_SIZE];
+long *stack_start = &user_stack[STACK_SIZE];
+
+void decompress_kernel(void)
+{
+ free_mem_ptr = (unsigned long)&_end;
+ free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+
+ decompress(input_data, input_len, NULL, NULL, output, NULL, error);
+}
diff --git a/arch/h8300/boot/compressed/vmlinux.lds b/arch/h8300/boot/compressed/vmlinux.lds
new file mode 100644
index 0000000..a0a3a0e
--- /dev/null
+++ b/arch/h8300/boot/compressed/vmlinux.lds
@@ -0,0 +1,32 @@
+SECTIONS
+{
+ .text :
+ {
+ __stext = . ;
+ __text = .;
+ *(.text..startup)
+ *(.text)
+ __etext = . ;
+ }
+
+ .rodata :
+ {
+ *(.rodata)
+ }
+ .data :
+
+ {
+ __sdata = . ;
+ ___data_start = . ;
+ *(.data.*)
+ }
+ .bss :
+ {
+ . = ALIGN(0x4) ;
+ __sbss = . ;
+ *(.bss*)
+ . = ALIGN(0x4) ;
+ __ebss = . ;
+ __end = . ;
+ }
+}
diff --git a/arch/h8300/boot/compressed/vmlinux.scr b/arch/h8300/boot/compressed/vmlinux.scr
new file mode 100644
index 0000000..a0849036
--- /dev/null
+++ b/arch/h8300/boot/compressed/vmlinux.scr
@@ -0,0 +1,9 @@
+SECTIONS
+{
+ .data : {
+ input_len = .;
+ LONG(input_data_end - input_data) input_data = .;
+ *(.data)
+ input_data_end = .;
+ }
+}
diff --git a/arch/h8300/kernel/head_ram.S b/arch/h8300/kernel/head_ram.S
new file mode 100644
index 0000000..f64b3d9
--- /dev/null
+++ b/arch/h8300/kernel/head_ram.S
@@ -0,0 +1,60 @@
+
+#include <linux/sys.h>
+#include <linux/init.h>
+#include <asm/unistd.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+
+#if defined(CONFIG_CPU_H8300H)
+ .h8300h
+#define SYSCR 0xfee012
+#define IRAMTOP 0xffff20
+#endif
+#if defined(CONFIG_CPU_H8S)
+ .h8300s
+#define INTCR 0xffff31
+#define IRAMTOP 0xffc000
+#endif
+
+ __HEAD
+ .global _start
+_start:
+ mov.l #IRAMTOP,sp
+ /* .bss clear */
+ mov.l #_sbss,er5
+ mov.l #_ebss,er4
+ sub.l er5,er4
+ shlr er4
+ shlr er4
+ sub.l er1,er1
+1:
+ mov.l er1,@er5
+ adds #4,er5
+ dec.l #1,er4
+ bne 1b
+ jsr @parse_bootparam
+
+ /* linux kernel start */
+#if defined(CONFIG_CPU_H8300H)
+ ldc #0xd0,ccr /* running kernel */
+ mov.l #SYSCR,er0
+ bclr #3,@er0
+#endif
+#if defined(CONFIG_CPU_H8S)
+ ldc #0x07,exr
+ bclr #4,@INTCR:8
+ bset #5,@INTCR:8 /* Interrupt mode 2 */
+ ldc #0x90,ccr /* running kernel */
+#endif
+ mov.l #init_thread_union,sp
+ add.l #0x2000,sp
+ jsr @start_kernel
+
+1:
+ bra 1b
+
+ .end
diff --git a/arch/h8300/kernel/head_rom.S b/arch/h8300/kernel/head_rom.S
new file mode 100644
index 0000000..60ca8fa
--- /dev/null
+++ b/arch/h8300/kernel/head_rom.S
@@ -0,0 +1,108 @@
+#include <linux/init.h>
+#include <asm/thread_info.h>
+
+#if defined(CONFIG_CPU_H8300H)
+ .h8300h
+#define SYSCR 0xfee012
+#define IRAMTOP 0xffff20
+#define NR_INT 64
+#endif
+#if defined(CONFIG_CPU_H8S)
+ .h8300s
+#define INTCR 0xffff31
+#define IRAMTOP 0xffc000
+#define NR_INT 128
+#endif
+
+ __HEAD
+ .global _start
+_start:
+ mov.l #IRAMTOP,sp
+#if !defined(CONFIG_H8300H_SIM) && \
+ !defined(CONFIG_H8S_SIM)
+ jsr @lowlevel_init
+
+ /* copy .data */
+ mov.l #_begin_data,er5
+ mov.l #_sdata,er6
+ mov.l #_edata,er4
+ sub.l er6,er4
+ shlr.l er4
+ shlr.l er4
+1:
+ mov.l @er5+,er0
+ mov.l er0,@er6
+ adds #4,er6
+ dec.l #1,er4
+ bne 1b
+ /* .bss clear */
+ mov.l #_sbss,er5
+ mov.l #_ebss,er4
+ sub.l er5,er4
+ shlr er4
+ shlr er4
+ sub.l er0,er0
+1:
+ mov.l er0,@er5
+ adds #4,er5
+ dec.l #1,er4
+ bne 1b
+#else
+ /* get cmdline from gdb */
+ jsr @0xcc
+ ;; er0 - argc
+ ;; er1 - argv
+ mov.l #command_line,er3
+ adds #4,er1
+ dec.l #1,er0
+ beq 4f
+1:
+ mov.l @er1+,er2
+2:
+ mov.b @er2+,r4l
+ beq 3f
+ mov.b r4l,@er3
+ adds #1,er3
+ bra 2b
+3:
+ mov.b #' ',r4l
+ mov.b r4l,@er3
+ adds #1,er3
+ dec.l #1,er0
+ bne 1b
+ subs #1,er3
+ mov.b #0,r4l
+ mov.b r4l,@er3
+4:
+#endif
+ /* linux kernel start */
+#if defined(CONFIG_CPU_H8300H)
+ ldc #0xd0,ccr /* running kernel */
+ mov.l #SYSCR,er0
+ bclr #3,@er0
+#endif
+#if defined(CONFIG_CPU_H8S)
+ ldc #0x07,exr
+ bclr #4,@INTCR:8
+ bset #5,@INTCR:8 /* Interrupt mode 2 */
+ ldc #0x90,ccr /* running kernel */
+#endif
+ mov.l #init_thread_union,sp
+ add.l #0x2000,sp
+ jsr @start_kernel
+
+1:
+ bra 1b
+
+#if defined(CONFIG_ROMKERNEL)
+ /* interrupt vector */
+ .section .vectors,"ax"
+ .long _start
+ .long _start
+vector = 2
+ .rept NR_INT - 2
+ .long _interrupt_redirect_table+vector*4
+vector = vector + 1
+ .endr
+#endif
+ .end
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
new file mode 100644
index 0000000..95e7fb6
--- /dev/null
+++ b/arch/h8300/kernel/setup.c
@@ -0,0 +1,174 @@
+/*
+ * linux/arch/h8300/kernel/setup.c
+ *
+ * Copyright (C) 2001-2014 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+/*
+ * This file handles the architecture-dependent parts of system setup
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+#include <asm/bootparams.h>
+#include <asm/page.h>
+
+#if defined(CONFIG_CPU_H8300H)
+#define CPU "H8/300H"
+#elif defined(CONFIG_CPU_H8S)
+#define CPU "H8S"
+#else
+#define CPU "Unknown"
+#endif
+
+struct bootparams bootparams;
+unsigned long rom_length;
+unsigned long memory_start;
+unsigned long memory_end;
+EXPORT_SYMBOL(memory_end);
+
+char __initdata command_line[COMMAND_LINE_SIZE];
+
+void sim_console_register(void);
+int h8300_clk_init(unsigned long hz);
+
+void __init __attribute__((weak)) early_device_init(void)
+{
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+ int bootmap_size;
+
+#if defined(CONFIG_ROMKERNEL)
+ bootparams.ram_end = CONFIG_RAMBASE + CONFIG_RAMSIZE;
+ bootparams.clock_freq = CONFIG_CPU_CLOCK;
+#endif
+
+ memory_start = (unsigned long) &_ramend;
+
+ memory_start = PAGE_ALIGN(memory_start);
+ memory_end = bootparams.ram_end;
+
+ init_mm.start_code = (unsigned long) _stext;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
+ init_mm.brk = (unsigned long) 0;
+
+ pr_notice("\r\n\nuClinux " CPU "\n");
+ pr_notice("Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
+
+ strcpy(boot_command_line, command_line);
+ *cmdline_p = command_line;
+
+ parse_early_param();
+
+ /*
+ * give all the memory to the bootmap allocator, tell it to put the
+ * boot mem_map at the start of memory
+ */
+ bootmap_size = init_bootmem_node(
+ NODE_DATA(0),
+ memory_start >> PAGE_SHIFT, /* map goes here */
+ PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */
+ memory_end >> PAGE_SHIFT);
+ /*
+ * free the usable memory, we have to make sure we do not free
+ * the bootmem bitmap so we then reserve it after freeing it :-)
+ */
+ free_bootmem(memory_start, memory_end - memory_start);
+ reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
+#if defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)
+ sim_console_register();
+#endif
+
+ early_device_init();
+ early_platform_driver_probe("earlyprintk", 1, 0);
+ /*
+ * get kmalloc into gear
+ */
+ paging_init();
+}
+
+/*
+ * Get CPU information for use by the procfs.
+ */
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ char *cpu;
+ u_long clockfreq;
+
+ cpu = CPU;
+ clockfreq = bootparams.clock_freq;
+
+ seq_printf(m, "CPU:\t\t%s\n"
+ "Clock:\t\t%lu.%1luMHz\n"
+ "BogoMips:\t%lu.%02lu\n"
+ "Calibration:\t%lu loops\n",
+ cpu,
+ clockfreq/1000, clockfreq%1000,
+ (loops_per_jiffy*HZ)/500000,
+ ((loops_per_jiffy*HZ)/5000)%100,
+ (loops_per_jiffy*HZ));
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < num_possible_cpus() ?
+ ((void *) 0x12345678) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
+
+void __init parse_bootparam(struct bootparams *bp)
+{
+ memcpy(&bootparams, bp, bp->size);
+ strncpy(command_line, bootparams.command_line, sizeof(command_line));
+}
+
+static void __init timer_setup(void)
+{
+ early_platform_driver_register_all("earlytimer");
+ early_platform_driver_probe("earlytimer", 1, 0);
+}
+
+void __init time_init(void)
+{
+ h8300_clk_init(bootparams.clock_freq);
+ late_time_init = timer_setup;
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 05/17] h8300: process and signals
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (3 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 04/17] h8300: kernel booting Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 06/17] h8300: CPU depend helpers Yoshinori Sato
` (11 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
process management helper and signal handling
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/kernel/process.c | 171 ++++++++++++++++++++++++++
arch/h8300/kernel/ptrace.c | 203 +++++++++++++++++++++++++++++++
arch/h8300/kernel/signal.c | 289 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 663 insertions(+)
create mode 100644 arch/h8300/kernel/process.c
create mode 100644 arch/h8300/kernel/ptrace.c
create mode 100644 arch/h8300/kernel/signal.c
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
new file mode 100644
index 0000000..dee4125
--- /dev/null
+++ b/arch/h8300/kernel/process.c
@@ -0,0 +1,171 @@
+/*
+ * linux/arch/h8300/kernel/process.c
+ *
+ * Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * Based on:
+ *
+ * linux/arch/m68knommu/kernel/process.c
+ *
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
+ * Kenneth Albanowski <kjahds@kjahds.com>,
+ * The Silver Hammer Group, Ltd.
+ *
+ * linux/arch/m68k/kernel/process.c
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ *
+ * 68060 fixes by Jesper Skov
+ */
+
+/*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/rcupdate.h>
+
+#include <asm/uaccess.h>
+#include <asm/traps.h>
+#include <asm/setup.h>
+#include <asm/pgtable.h>
+
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+asmlinkage void ret_from_fork(void);
+asmlinkage void ret_from_kernel_thread(void);
+
+/*
+ * The idle loop on an H8/300..
+ */
+void arch_cpu_idle(void)
+{
+ local_irq_enable();
+ __asm__("sleep");
+}
+
+void machine_restart(char *__unused)
+{
+ local_irq_disable();
+ __asm__("jmp @@0");
+}
+
+void machine_halt(void)
+{
+ local_irq_disable();
+ __asm__("sleep");
+ for (;;)
+ ;
+}
+
+void machine_power_off(void)
+{
+ local_irq_disable();
+ __asm__("sleep");
+ for (;;)
+ ;
+}
+
+void show_regs(struct pt_regs *regs)
+{
+ show_regs_print_info(KERN_DEFAULT);
+
+ pr_notice("\n");
+ pr_notice("PC: %08lx Status: %02x\n",
+ regs->pc, regs->ccr);
+ pr_notice("ORIG_ER0: %08lx ER0: %08lx ER1: %08lx\n",
+ regs->orig_er0, regs->er0, regs->er1);
+ pr_notice("ER2: %08lx ER3: %08lx ER4: %08lx ER5: %08lx\n",
+ regs->er2, regs->er3, regs->er4, regs->er5);
+ pr_notice("ER6' %08lx ", regs->er6);
+ if (user_mode(regs))
+ printk("USP: %08lx\n", rdusp());
+ else
+ printk("\n");
+}
+
+void flush_thread(void)
+{
+}
+
+int copy_thread(unsigned long clone_flags,
+ unsigned long usp, unsigned long topstk,
+ struct task_struct *p)
+{
+ struct pt_regs *childregs;
+
+ childregs = (struct pt_regs *) (THREAD_SIZE + task_stack_page(p)) - 1;
+
+ if (unlikely(p->flags & PF_KTHREAD)) {
+ memset(childregs, 0, sizeof(struct pt_regs));
+ childregs->retpc = (unsigned long) ret_from_kernel_thread;
+ childregs->er4 = topstk; /* arg */
+ childregs->er5 = usp; /* fn */
+ } else {
+ *childregs = *current_pt_regs();
+ childregs->er0 = 0;
+ childregs->retpc = (unsigned long) ret_from_fork;
+ p->thread.usp = usp ?: rdusp();
+ }
+ p->thread.ksp = (unsigned long)childregs;
+
+ return 0;
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+ return ((struct pt_regs *)tsk->thread.esp0)->pc;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ unsigned long fp, pc;
+ unsigned long stack_page;
+ int count = 0;
+
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+ stack_page = (unsigned long)p;
+ fp = ((struct pt_regs *)p->thread.ksp)->er6;
+ do {
+ if (fp < stack_page+sizeof(struct thread_info) ||
+ fp >= 8184+stack_page)
+ return 0;
+ pc = ((unsigned long *)fp)[1];
+ if (!in_sched_functions(pc))
+ return pc;
+ fp = *(unsigned long *) fp;
+ } while (count++ < 16);
+ return 0;
+}
+
+/* generic sys_clone is not enough registers */
+asmlinkage int sys_clone(unsigned long __user *args)
+{
+ unsigned long clone_flags;
+ unsigned long newsp;
+ uintptr_t parent_tidptr;
+ uintptr_t child_tidptr;
+
+ get_user(clone_flags, &args[0]);
+ get_user(newsp, &args[1]);
+ get_user(parent_tidptr, &args[2]);
+ get_user(child_tidptr, &args[3]);
+ return do_fork(clone_flags, newsp, 0,
+ (int __user *)parent_tidptr, (int __user *)child_tidptr);
+}
diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c
new file mode 100644
index 0000000..9207554
--- /dev/null
+++ b/arch/h8300/kernel/ptrace.c
@@ -0,0 +1,203 @@
+/*
+ * linux/arch/h8300/kernel/ptrace.c
+ *
+ * Copyright 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of
+ * this archive for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/audit.h>
+#include <linux/tracehook.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
+
+#define CCR_MASK 0x6f /* mode/imask not set */
+#define EXR_MASK 0x80 /* modify only T */
+
+#define PT_REG(r) offsetof(struct pt_regs, r)
+
+extern void user_disable_single_step(struct task_struct *child);
+
+/* Mapping from PT_xxx to the stack offset at which the register is
+ saved. Notice that usp has no stack-slot and needs to be treated
+ specially (see get_reg/put_reg below). */
+static const int register_offset[] = {
+ PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4),
+ PT_REG(er5), PT_REG(er6), PT_REG(er0), -1,
+ PT_REG(orig_er0), PT_REG(ccr), PT_REG(pc),
+#if defined(CONFIG_CPU_H8S)
+ PT_REG(exr),
+#endif
+};
+
+/* read register */
+long h8300_get_reg(struct task_struct *task, int regno)
+{
+ switch (regno) {
+ case PT_USP:
+ return task->thread.usp + sizeof(long)*2;
+ case PT_CCR:
+ case PT_EXR:
+ return *(unsigned short *)(task->thread.esp0 +
+ register_offset[regno]);
+ default:
+ return *(unsigned long *)(task->thread.esp0 +
+ register_offset[regno]);
+ }
+}
+
+int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
+{
+ unsigned short oldccr;
+ unsigned short oldexr;
+
+ switch (regno) {
+ case PT_USP:
+ task->thread.usp = data - sizeof(long)*2;
+ case PT_CCR:
+ oldccr = *(unsigned short *)(task->thread.esp0 +
+ register_offset[regno]);
+ oldccr &= ~CCR_MASK;
+ data &= CCR_MASK;
+ data |= oldccr;
+ *(unsigned short *)(task->thread.esp0 +
+ register_offset[regno]) = data;
+ break;
+ case PT_EXR:
+ oldexr = *(unsigned short *)(task->thread.esp0 +
+ register_offset[regno]);
+ oldccr &= ~EXR_MASK;
+ data &= EXR_MASK;
+ data |= oldexr;
+ *(unsigned short *)(task->thread.esp0 +
+ register_offset[regno]) = data;
+ break;
+ default:
+ *(unsigned long *)(task->thread.esp0 +
+ register_offset[regno]) = data;
+ break;
+ }
+ return 0;
+}
+
+static int regs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ int r;
+ struct user_regs_struct regs;
+ long *reg = (long *)®s;
+
+ /* build user regs in buffer */
+ for (r = 0; r < ARRAY_SIZE(register_offset); r++)
+ *reg++ = h8300_get_reg(target, r);
+
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ ®s, 0, sizeof(regs));
+}
+
+static int regs_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int r;
+ int ret;
+ struct user_regs_struct regs;
+ long *reg;
+
+ /* build user regs in buffer */
+ for (reg = (long *)®s, r = 0; r < ARRAY_SIZE(register_offset); r++)
+ *reg++ = h8300_get_reg(target, r);
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ ®s, 0, sizeof(regs));
+ if (ret)
+ return ret;
+
+ /* write back to pt_regs */
+ for (reg = (long *)®s, r = 0; r < ARRAY_SIZE(register_offset); r++)
+ h8300_put_reg(target, r, *reg++);
+ return 0;
+}
+
+enum h8300_regset {
+ REGSET_GENERAL,
+};
+
+static const struct user_regset h8300_regsets[] = {
+ [REGSET_GENERAL] = {
+ .core_note_type = NT_PRSTATUS,
+ .n = ELF_NGREG,
+ .size = sizeof(long),
+ .align = sizeof(long),
+ .get = regs_get,
+ .set = regs_set,
+ },
+};
+
+static const struct user_regset_view user_h8300_native_view = {
+ .name = "h8300",
+ .e_machine = EM_H8_300,
+ .regsets = h8300_regsets,
+ .n = ARRAY_SIZE(h8300_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+ return &user_h8300_native_view;
+}
+
+void ptrace_disable(struct task_struct *child)
+{
+ user_disable_single_step(child);
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+ unsigned long addr, unsigned long data)
+{
+ int ret;
+
+ switch (request) {
+ default:
+ ret = ptrace_request(child, request, addr, data);
+ break;
+ }
+ return ret;
+}
+
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+ long ret = 0;
+
+ if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+ tracehook_report_syscall_entry(regs))
+ /*
+ * Tracing decided this syscall should not happen.
+ * We'll return a bogus call number to get an ENOSYS
+ * error, but leave the original number in regs->regs[0].
+ */
+ ret = -1L;
+
+ audit_syscall_entry(regs->er1, regs->er2, regs->er3,
+ regs->er4, regs->er5);
+
+ return ret ?: regs->er0;
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+ int step;
+
+ audit_syscall_exit(regs);
+
+ step = test_thread_flag(TIF_SINGLESTEP);
+ if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+ tracehook_report_syscall_exit(regs, step);
+}
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
new file mode 100644
index 0000000..380fffd
--- /dev/null
+++ b/arch/h8300/kernel/signal.c
@@ -0,0 +1,289 @@
+/*
+ * linux/arch/h8300/kernel/signal.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * uClinux H8/300 support by Yoshinori Sato <ysato@users.sourceforge.jp>
+ * and David McCullough <davidm@snapgear.com>
+ *
+ * Based on
+ * Linux/m68k by Hamish Macdonald
+ */
+
+/*
+ * ++roman (07/09/96): implemented signal stacks (specially for tosemu on
+ * Atari :-) Current limitation: Only one sigstack can be active at one time.
+ * If a second signal with SA_ONSTACK set arrives while working on a sigstack,
+ * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested
+ * signal handlers!
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/syscalls.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/highuid.h>
+#include <linux/personality.h>
+#include <linux/tty.h>
+#include <linux/binfmts.h>
+#include <linux/tracehook.h>
+
+#include <asm/setup.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/traps.h>
+#include <asm/ucontext.h>
+
+/*
+ * Do a signal return; undo the signal stack.
+ *
+ * Keep the return code on the stack quadword aligned!
+ * That makes the cache flush below easier.
+ */
+
+struct rt_sigframe {
+ long dummy_er0;
+ long dummy_vector;
+#if defined(CONFIG_CPU_H8S)
+ short dummy_exr;
+#endif
+ long dummy_pc;
+ char *pretcode;
+ struct siginfo *pinfo;
+ void *puc;
+ unsigned char retcode[8];
+ struct siginfo info;
+ struct ucontext uc;
+ int sig;
+} __packed __aligned(2);
+
+static inline int
+restore_sigcontext(struct sigcontext *usc, int *pd0)
+{
+ struct pt_regs *regs = current_pt_regs();
+ int err = 0;
+ unsigned int ccr;
+ unsigned int usp;
+ unsigned int er0;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+ /* restore passed registers */
+#define COPY(r) do { err |= get_user(regs->r, &usc->sc_##r); } while (0)
+ COPY(er1);
+ COPY(er2);
+ COPY(er3);
+ COPY(er5);
+ COPY(pc);
+ ccr = regs->ccr & 0x10;
+ COPY(ccr);
+#undef COPY
+ regs->ccr &= 0xef;
+ regs->ccr |= ccr;
+ regs->orig_er0 = -1; /* disable syscall checks */
+ err |= __get_user(usp, &usc->sc_usp);
+ wrusp(usp);
+
+ err |= __get_user(er0, &usc->sc_er0);
+ *pd0 = er0;
+ return err;
+}
+
+asmlinkage int sys_rt_sigreturn(void)
+{
+ unsigned long usp = rdusp();
+ struct rt_sigframe *frame = (struct rt_sigframe *)(usp - 4);
+ sigset_t set;
+ int er0;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ set_current_blocked(&set);
+
+ if (restore_sigcontext(&frame->uc.uc_mcontext, &er0))
+ goto badframe;
+
+ if (restore_altstack(&frame->uc.uc_stack))
+ goto badframe;
+
+ return er0;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+static int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
+ unsigned long mask)
+{
+ int err = 0;
+
+ err |= __put_user(regs->er0, &sc->sc_er0);
+ err |= __put_user(regs->er1, &sc->sc_er1);
+ err |= __put_user(regs->er2, &sc->sc_er2);
+ err |= __put_user(regs->er3, &sc->sc_er3);
+ err |= __put_user(regs->er4, &sc->sc_er4);
+ err |= __put_user(regs->er5, &sc->sc_er5);
+ err |= __put_user(regs->er6, &sc->sc_er6);
+ err |= __put_user(rdusp(), &sc->sc_usp);
+ err |= __put_user(regs->pc, &sc->sc_pc);
+ err |= __put_user(regs->ccr, &sc->sc_ccr);
+ err |= __put_user(mask, &sc->sc_mask);
+
+ return err;
+}
+
+static inline void __user *
+get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size)
+{
+ return (void __user *)((sigsp(rdusp(), ksig) - frame_size) & -8UL);
+}
+
+static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
+ struct pt_regs *regs)
+{
+ struct rt_sigframe *frame;
+ int err = 0;
+ unsigned char *ret;
+
+ frame = get_sigframe(ksig, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ return -EFAULT;
+
+ if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+ err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __save_altstack(&frame->uc.uc_stack, rdusp());
+ err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
+ err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+ if (err)
+ return -EFAULT;
+
+ /* Set up to return from userspace. */
+ ret = frame->retcode;
+ if (ksig->ka.sa.sa_flags & SA_RESTORER)
+ ret = (unsigned char *)(ksig->ka.sa.sa_restorer);
+ else {
+ /* sub.l er0,er0; mov.b #__NR_rt_sigreturn,r0l; trapa #0 */
+ err |= __put_user(0x1a80f800 + (__NR_rt_sigreturn & 0xff),
+ (unsigned long *)(frame->retcode + 0));
+ err |= __put_user(0x5700,
+ (unsigned short *)(frame->retcode + 4));
+ }
+ err |= __put_user(ret, &frame->pretcode);
+
+ if (err)
+ return -EFAULT;
+
+ /* Set up registers for signal handler */
+ wrusp((unsigned long) frame);
+ regs->pc = (unsigned long) ksig->ka.sa.sa_handler;
+ regs->er0 = ksig->sig;
+ regs->er1 = (unsigned long)&(frame->info);
+ regs->er2 = (unsigned long)&frame->uc;
+ regs->er5 = current->mm->start_data; /* GOT base */
+
+ return 0;
+}
+
+static void
+handle_restart(struct pt_regs *regs, struct k_sigaction *ka)
+{
+ switch (regs->er0) {
+ case -ERESTARTNOHAND:
+ if (!ka)
+ goto do_restart;
+ regs->er0 = -EINTR;
+ break;
+ case -ERESTART_RESTARTBLOCK:
+ if (!ka) {
+ regs->er0 = __NR_restart_syscall;
+ regs->pc -= 2;
+ } else
+ regs->er0 = -EINTR;
+ break;
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->er0 = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+do_restart:
+ regs->er0 = regs->orig_er0;
+ regs->pc -= 2;
+ break;
+ }
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static void
+handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+ sigset_t *oldset = sigmask_to_save();
+ int ret;
+ /* are we from a system call? */
+ if (regs->orig_er0 >= 0)
+ handle_restart(regs, &ksig->ka);
+
+ ret = setup_rt_frame(ksig, oldset, regs);
+
+ signal_setup_done(ret, ksig, 0);
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ */
+static void do_signal(struct pt_regs *regs)
+{
+ struct ksignal ksig;
+
+ current->thread.esp0 = (unsigned long) regs;
+
+ if (get_signal(&ksig)) {
+ /* Whee! Actually deliver the signal. */
+ handle_signal(&ksig, regs);
+ return;
+ }
+ /* Did we come from a system call? */
+ if (regs->orig_er0 >= 0)
+ handle_restart(regs, NULL);
+
+ /* If there's no signal to deliver, we just restore the saved mask. */
+ restore_saved_sigmask();
+}
+
+asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
+{
+ if (thread_info_flags & _TIF_SIGPENDING)
+ do_signal(regs);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ }
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 06/17] h8300: CPU depend helpers
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (4 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 05/17] h8300: process and signals Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 07/17] h8300: miscellaneous functions Yoshinori Sato
` (10 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
H8/3069 and H8S2678 have little different specification
(peripheral, interrupt and trace).
Its difference is absorbed here.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/kernel/cpu/Makefile | 4 +
arch/h8300/kernel/cpu/h83069/Makefile | 1 +
arch/h8300/kernel/cpu/h83069/setup.c | 202 ++++++++++++++++++++++++++
arch/h8300/kernel/cpu/h8s2678/Makefile | 1 +
arch/h8300/kernel/cpu/h8s2678/setup.c | 161 +++++++++++++++++++++
arch/h8300/kernel/cpu/irq_h.c | 62 ++++++++
arch/h8300/kernel/cpu/irq_s.c | 70 +++++++++
arch/h8300/kernel/cpu/ptrace_h.c | 256 +++++++++++++++++++++++++++++++++
arch/h8300/kernel/cpu/ptrace_s.c | 44 ++++++
9 files changed, 801 insertions(+)
create mode 100644 arch/h8300/kernel/cpu/Makefile
create mode 100644 arch/h8300/kernel/cpu/h83069/Makefile
create mode 100644 arch/h8300/kernel/cpu/h83069/setup.c
create mode 100644 arch/h8300/kernel/cpu/h8s2678/Makefile
create mode 100644 arch/h8300/kernel/cpu/h8s2678/setup.c
create mode 100644 arch/h8300/kernel/cpu/irq_h.c
create mode 100644 arch/h8300/kernel/cpu/irq_s.c
create mode 100644 arch/h8300/kernel/cpu/ptrace_h.c
create mode 100644 arch/h8300/kernel/cpu/ptrace_s.c
diff --git a/arch/h8300/kernel/cpu/Makefile b/arch/h8300/kernel/cpu/Makefile
new file mode 100644
index 0000000..684475c
--- /dev/null
+++ b/arch/h8300/kernel/cpu/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_CPU_H8300H) += ptrace_h.o irq_h.o
+obj-$(CONFIG_CPU_H8S) += ptrace_s.o irq_s.o
+obj-$(CONFIG_H83069) += h83069/
+obj-$(CONFIG_H8S2678) += h8s2678/
diff --git a/arch/h8300/kernel/cpu/h83069/Makefile b/arch/h8300/kernel/cpu/h83069/Makefile
new file mode 100644
index 0000000..49d283e
--- /dev/null
+++ b/arch/h8300/kernel/cpu/h83069/Makefile
@@ -0,0 +1 @@
+obj-y = setup.o
diff --git a/arch/h8300/kernel/cpu/h83069/setup.c b/arch/h8300/kernel/cpu/h83069/setup.c
new file mode 100644
index 0000000..99c2716
--- /dev/null
+++ b/arch/h8300/kernel/cpu/h83069/setup.c
@@ -0,0 +1,202 @@
+/*
+ * H8/3069 Internal peripheral setup
+ *
+ * Copyright (C) 2009,2014 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/serial_sci.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/timer.h>
+
+static struct resource sci0_resources[] = {
+ DEFINE_RES_MEM(0xffffb0, 8),
+ DEFINE_RES_IRQ(52),
+ DEFINE_RES_IRQ(53),
+ DEFINE_RES_IRQ(54),
+ DEFINE_RES_IRQ(55),
+};
+
+
+static struct plat_sci_port sci0_platform_data = {
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .type = PORT_SCI,
+};
+
+static struct resource sci1_resources[] = {
+ DEFINE_RES_MEM(0xffffb8, 8),
+ DEFINE_RES_IRQ(56),
+ DEFINE_RES_IRQ(57),
+ DEFINE_RES_IRQ(58),
+ DEFINE_RES_IRQ(59),
+};
+
+static struct plat_sci_port sci1_platform_data = {
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .type = PORT_SCI,
+};
+
+static struct platform_device sci0_device = {
+ .name = "sh-sci",
+ .id = 0,
+ .resource = sci0_resources,
+ .num_resources = ARRAY_SIZE(sci0_resources),
+ .dev = {
+ .platform_data = &sci0_platform_data,
+ },
+};
+
+static struct platform_device sci1_device = {
+ .name = "sh-sci",
+ .id = 1,
+ .resource = sci1_resources,
+ .num_resources = ARRAY_SIZE(sci1_resources),
+ .dev = {
+ .platform_data = &sci1_platform_data,
+ },
+};
+
+static struct h8300_timer8_config tm8_unit0_platform_data = {
+ .mode = H8300_TMR8_CLKEVTDEV,
+ .div = H8300_TMR8_DIV_8,
+};
+
+static struct resource tm8_unit0_resources[] = {
+ DEFINE_RES_MEM(0xffff80, 9),
+ DEFINE_RES_IRQ(36),
+ DEFINE_RES_IRQ(39),
+};
+
+static struct platform_device timer8_unit0_device = {
+ .name = "h8300-8timer",
+ .id = 0,
+ .dev = {
+ .platform_data = &tm8_unit0_platform_data,
+ },
+ .resource = tm8_unit0_resources,
+ .num_resources = ARRAY_SIZE(tm8_unit0_resources),
+};
+
+static struct h8300_timer8_config tm8_unit1_platform_data = {
+ .mode = H8300_TMR8_CLKSRC,
+ .div = H8300_TMR8_DIV_8,
+};
+
+static struct resource tm8_unit1_resources[] = {
+ DEFINE_RES_MEM(0xffff90, 9),
+ DEFINE_RES_IRQ(40),
+ DEFINE_RES_IRQ(43),
+};
+
+static struct platform_device timer8_unit1_device = {
+ .name = "h8300-8timer",
+ .id = 1,
+ .dev = {
+ .platform_data = &tm8_unit1_platform_data,
+ },
+ .resource = tm8_unit1_resources,
+ .num_resources = ARRAY_SIZE(tm8_unit1_resources),
+};
+
+
+static struct h8300_timer16_config timer16data0 = {
+ .enb = 0,
+ .imfa = 0,
+ .imiea = 4,
+};
+
+static struct h8300_timer16_config timer16data1 = {
+ .enb = 1,
+ .imfa = 1,
+ .imiea = 5,
+};
+
+static struct h8300_timer16_config timer16data2 = {
+ .enb = 2,
+ .imfa = 2,
+ .imiea = 6,
+};
+
+static struct resource tm16ch0_resources[] = {
+ DEFINE_RES_MEM(0xffff68, 8),
+ DEFINE_RES_MEM(0xffff60, 7),
+ DEFINE_RES_IRQ(24),
+};
+
+static struct resource tm16ch1_resources[] = {
+ DEFINE_RES_MEM(0xffff70, 8),
+ DEFINE_RES_MEM(0xffff60, 7),
+ DEFINE_RES_IRQ(28),
+};
+
+static struct resource tm16ch2_resources[] = {
+ DEFINE_RES_MEM(0xffff78, 8),
+ DEFINE_RES_MEM(0xffff60, 7),
+ DEFINE_RES_IRQ(32),
+};
+
+static struct platform_device timer16_ch0_device = {
+ .name = "h8300h-16timer",
+ .id = 0,
+ .dev = {
+ .platform_data = &timer16data0,
+ },
+ .resource = tm16ch0_resources,
+ .num_resources = ARRAY_SIZE(tm16ch0_resources),
+};
+
+static struct platform_device timer16_ch1_device = {
+ .name = "h8300h-16timer",
+ .id = 1,
+ .dev = {
+ .platform_data = &timer16data1,
+ },
+ .resource = tm16ch1_resources,
+ .num_resources = ARRAY_SIZE(tm16ch1_resources),
+};
+
+static struct platform_device timer16_ch2_device = {
+ .name = "h8300h-16timer",
+ .id = 2,
+ .dev = {
+ .platform_data = &timer16data2,
+ },
+ .resource = tm16ch2_resources,
+ .num_resources = ARRAY_SIZE(tm16ch2_resources),
+};
+
+static struct platform_device *devices[] __initdata = {
+ &timer8_unit1_device,
+ &timer16_ch0_device,
+ &timer16_ch1_device,
+ &timer16_ch2_device,
+ &sci0_device,
+ &sci1_device,
+};
+
+static struct platform_device *early_devices[] __initdata = {
+ &timer8_unit0_device,
+ &sci0_device,
+ &sci1_device,
+};
+
+static int __init devices_register(void)
+{
+ return platform_add_devices(devices,
+ ARRAY_SIZE(devices));
+}
+
+arch_initcall(devices_register);
+
+void __init early_device_init(void)
+{
+ early_platform_add_devices(early_devices,
+ ARRAY_SIZE(early_devices));
+}
diff --git a/arch/h8300/kernel/cpu/h8s2678/Makefile b/arch/h8300/kernel/cpu/h8s2678/Makefile
new file mode 100644
index 0000000..49d283e
--- /dev/null
+++ b/arch/h8300/kernel/cpu/h8s2678/Makefile
@@ -0,0 +1 @@
+obj-y = setup.o
diff --git a/arch/h8300/kernel/cpu/h8s2678/setup.c b/arch/h8300/kernel/cpu/h8s2678/setup.c
new file mode 100644
index 0000000..ea743ec
--- /dev/null
+++ b/arch/h8300/kernel/cpu/h8s2678/setup.c
@@ -0,0 +1,161 @@
+/*
+ * H8S2678 Internal peripheral setup
+ *
+ * Copyright (C) 2014 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/serial_sci.h>
+#include <asm/timer.h>
+
+static struct resource sci0_resources[] = {
+ DEFINE_RES_MEM(0xffff78, 8),
+ DEFINE_RES_IRQ(88),
+ DEFINE_RES_IRQ(89),
+ DEFINE_RES_IRQ(90),
+ DEFINE_RES_IRQ(91),
+};
+
+
+static struct plat_sci_port sci0_platform_data = {
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .type = PORT_SCI,
+};
+
+static struct resource sci1_resources[] = {
+ DEFINE_RES_MEM(0xffff80, 8),
+ DEFINE_RES_IRQ(92),
+ DEFINE_RES_IRQ(93),
+ DEFINE_RES_IRQ(94),
+ DEFINE_RES_IRQ(95),
+};
+
+static struct plat_sci_port sci1_platform_data = {
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .type = PORT_SCI,
+};
+
+static struct resource sci2_resources[] = {
+ DEFINE_RES_MEM(0xffff88, 8),
+ DEFINE_RES_IRQ(96),
+ DEFINE_RES_IRQ(97),
+ DEFINE_RES_IRQ(98),
+ DEFINE_RES_IRQ(99),
+};
+
+static struct plat_sci_port sci2_platform_data = {
+ .flags = UPF_BOOT_AUTOCONF,
+ .scscr = SCSCR_RE | SCSCR_TE,
+ .type = PORT_SCI,
+};
+
+static struct platform_device sci0_device = {
+ .name = "sh-sci",
+ .id = 0,
+ .resource = sci0_resources,
+ .num_resources = ARRAY_SIZE(sci0_resources),
+ .dev = {
+ .platform_data = &sci0_platform_data,
+ },
+};
+
+static struct platform_device sci1_device = {
+ .name = "sh-sci",
+ .id = 1,
+ .resource = sci1_resources,
+ .num_resources = ARRAY_SIZE(sci1_resources),
+ .dev = {
+ .platform_data = &sci1_platform_data,
+ },
+};
+
+static struct platform_device sci2_device = {
+ .name = "sh-sci",
+ .id = 2,
+ .resource = sci2_resources,
+ .num_resources = ARRAY_SIZE(sci2_resources),
+ .dev = {
+ .platform_data = &sci2_platform_data,
+ },
+};
+
+static struct h8300_timer8_config timer8_platform_data = {
+ .mode = H8300_TMR8_CLKEVTDEV,
+ .div = H8300_TMR8_DIV_8,
+};
+
+static struct resource tm8_unit0_resources[] = {
+ DEFINE_RES_MEM(0xffffb0, 10),
+ DEFINE_RES_IRQ(72),
+ DEFINE_RES_IRQ(75),
+};
+
+static struct platform_device tm8_unit0_device = {
+ .name = "h8300-8timer",
+ .id = 0,
+ .dev = {
+ .platform_data = &timer8_platform_data,
+ },
+ .resource = tm8_unit0_resources,
+ .num_resources = ARRAY_SIZE(tm8_unit0_resources),
+};
+
+static struct resource tpu12_resources[] = {
+ DEFINE_RES_MEM(0xffffe0, 16),
+ DEFINE_RES_MEM(0xfffff0, 12),
+};
+
+static struct resource tpu45_resources[] = {
+ DEFINE_RES_MEM(0xfffe90, 16),
+ DEFINE_RES_MEM(0xfffea0, 12),
+};
+
+static struct platform_device tpu12_device = {
+ .name = "h8s-tpu",
+ .id = 0,
+ .resource = tpu12_resources,
+ .num_resources = ARRAY_SIZE(tpu12_resources),
+};
+
+static struct platform_device tpu45_device = {
+ .name = "h8s-tpu",
+ .id = 1,
+ .resource = tpu45_resources,
+ .num_resources = ARRAY_SIZE(tpu45_resources),
+};
+
+static struct platform_device *devices[] __initdata = {
+ &tpu12_device,
+ &tpu45_device,
+ &sci0_device,
+ &sci1_device,
+ &sci2_device,
+};
+
+static struct platform_device *early_devices[] __initdata = {
+ &tm8_unit0_device,
+ &sci0_device,
+ &sci1_device,
+ &sci2_device,
+};
+
+static int __init devices_register(void)
+{
+ return platform_add_devices(devices,
+ ARRAY_SIZE(devices));
+}
+arch_initcall(devices_register);
+
+void __init early_device_init(void)
+{
+ /* SCI / Timer enable */
+ ctrl_outw(0x07f0, 0xffff40);
+ early_platform_add_devices(early_devices,
+ ARRAY_SIZE(early_devices));
+}
diff --git a/arch/h8300/kernel/cpu/irq_h.c b/arch/h8300/kernel/cpu/irq_h.c
new file mode 100644
index 0000000..90021d8
--- /dev/null
+++ b/arch/h8300/kernel/cpu/irq_h.c
@@ -0,0 +1,62 @@
+/*
+ * linux/arch/h8300/kernel/irq_h.c
+ *
+ * Copyright 2014 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+
+static const char ipr_bit[] = {
+ 7, 6, 5, 5,
+ 4, 4, 4, 4, 3, 3, 3, 3,
+ 2, 2, 2, 2, 1, 1, 1, 1,
+ 0, 0, 0, 0, 15, 15, 15, 15,
+ 14, 14, 14, 14, 13, 13, 13, 13,
+ -1, -1, -1, -1, 11, 11, 11, 11,
+ 10, 10, 10, 10, 9, 9, 9, 9,
+};
+
+#define IPR 0xffee18
+
+static void h8300h_disable_irq(struct irq_data *data)
+{
+ int bit;
+ int irq = data->irq - 12;
+
+ bit = ipr_bit[irq];
+ if (bit >= 0) {
+ if (bit < 8)
+ ctrl_bclr(bit & 7, IPR);
+ else
+ ctrl_bclr(bit & 7, (IPR+1));
+ }
+}
+
+static void h8300h_enable_irq(struct irq_data *data)
+{
+ int bit;
+ int irq = data->irq - 12;
+
+ bit = ipr_bit[irq];
+ if (bit >= 0) {
+ if (bit < 8)
+ ctrl_bset(bit & 7, IPR);
+ else
+ ctrl_bset(bit & 7, (IPR+1));
+ }
+}
+
+struct irq_chip h8300h_irq_chip = {
+ .name = "H8/300H-INTC",
+ .irq_enable = h8300h_enable_irq,
+ .irq_disable = h8300h_disable_irq,
+};
+
+void __init h8300_init_ipr(void)
+{
+ /* All interrupt priority high */
+ ctrl_outb(0xff, IPR + 0);
+ ctrl_outb(0xee, IPR + 1);
+}
diff --git a/arch/h8300/kernel/cpu/irq_s.c b/arch/h8300/kernel/cpu/irq_s.c
new file mode 100644
index 0000000..71c322e
--- /dev/null
+++ b/arch/h8300/kernel/cpu/irq_s.c
@@ -0,0 +1,70 @@
+/*
+ * linux/arch/h8300/kernel/irq_s.c
+ *
+ * Copyright 2014 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/irq.h>
+#include <asm/io.h>
+#define IPRA 0xfffe00
+
+static const unsigned char ipr_table[] = {
+ 0x03, 0x02, 0x01, 0x00, 0x13, 0x12, 0x11, 0x10, /* 16 - 23 */
+ 0x23, 0x22, 0x21, 0x20, 0x33, 0x32, 0x31, 0x30, /* 24 - 31 */
+ 0x43, 0x42, 0x41, 0x40, 0x53, 0x53, 0x52, 0x52, /* 32 - 39 */
+ 0x51, 0x51, 0x51, 0x51, 0x51, 0x51, 0x51, 0x51, /* 40 - 47 */
+ 0x50, 0x50, 0x50, 0x50, 0x63, 0x63, 0x63, 0x63, /* 48 - 55 */
+ 0x62, 0x62, 0x62, 0x62, 0x62, 0x62, 0x62, 0x62, /* 56 - 63 */
+ 0x61, 0x61, 0x61, 0x61, 0x60, 0x60, 0x60, 0x60, /* 64 - 71 */
+ 0x73, 0x73, 0x73, 0x73, 0x72, 0x72, 0x72, 0x72, /* 72 - 79 */
+ 0x71, 0x71, 0x71, 0x71, 0x70, 0x83, 0x82, 0x81, /* 80 - 87 */
+ 0x80, 0x80, 0x80, 0x80, 0x93, 0x93, 0x93, 0x93, /* 88 - 95 */
+ 0x92, 0x92, 0x92, 0x92, 0x91, 0x91, 0x91, 0x91, /* 96 - 103 */
+ 0x90, 0x90, 0x90, 0x90, 0xa3, 0xa3, 0xa3, 0xa3, /* 104 - 111 */
+ 0xa2, 0xa2, 0xa2, 0xa2, 0xa1, 0xa1, 0xa1, 0xa1, /* 112 - 119 */
+ 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, /* 120 - 127 */
+};
+
+static void h8s_disable_irq(struct irq_data *data)
+{
+ int pos;
+ unsigned int addr;
+ unsigned short pri;
+ int irq = data->irq;
+
+ addr = IPRA + ((ipr_table[irq - 16] & 0xf0) >> 3);
+ pos = (ipr_table[irq - 16] & 0x0f) * 4;
+ pri = ~(0x000f << pos);
+ pri &= ctrl_inw(addr);
+ ctrl_outw(pri, addr);
+}
+
+static void h8s_enable_irq(struct irq_data *data)
+{
+ int pos;
+ unsigned int addr;
+ unsigned short pri;
+ int irq = data->irq;
+
+ addr = IPRA + ((ipr_table[irq - 16] & 0xf0) >> 3);
+ pos = (ipr_table[irq - 16] & 0x0f) * 4;
+ pri = ~(0x000f << pos);
+ pri &= ctrl_inw(addr);
+ pri |= 1 << pos;
+ ctrl_outw(pri, addr);
+}
+
+struct irq_chip h8s_irq_chip = {
+ .name = "H8S-INTC",
+ .irq_enable = h8s_enable_irq,
+ .irq_disable = h8s_disable_irq,
+};
+
+void __init h8300_init_ipr(void)
+{
+ int n;
+ /* All interrupt priority is 1 */
+ /* IPRA to IPRK */
+ for (n = 0; n <= 'k' - 'a'; n++)
+ ctrl_outw(0x1111, IPRA + (n * 2));
+}
diff --git a/arch/h8300/kernel/cpu/ptrace_h.c b/arch/h8300/kernel/cpu/ptrace_h.c
new file mode 100644
index 0000000..fe3b567
--- /dev/null
+++ b/arch/h8300/kernel/cpu/ptrace_h.c
@@ -0,0 +1,256 @@
+/*
+ * ptrace cpu depend helper functions
+ *
+ * Copyright 2003, 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of
+ * this archive for more details.
+ */
+
+#include <linux/linkage.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+#define BREAKINST 0x5730 /* trapa #3 */
+
+/* disable singlestep */
+void user_disable_single_step(struct task_struct *child)
+{
+ if ((long)child->thread.breakinfo.addr != -1L) {
+ *(child->thread.breakinfo.addr) = child->thread.breakinfo.inst;
+ child->thread.breakinfo.addr = (unsigned short *)-1L;
+ }
+}
+
+/* calculate next pc */
+enum jump_type {none, /* normal instruction */
+ jabs, /* absolute address jump */
+ ind, /* indirect address jump */
+ ret, /* return to subrutine */
+ reg, /* register indexed jump */
+ relb, /* pc relative jump (byte offset) */
+ relw, /* pc relative jump (word offset) */
+ };
+
+/* opcode decode table define
+ ptn: opcode pattern
+ msk: opcode bitmask
+ len: instruction length (<0 next table index)
+ jmp: jump operation mode */
+struct optable {
+ unsigned char bitpattern;
+ unsigned char bitmask;
+ signed char length;
+ signed char type;
+} __packed __aligned(1);
+
+#define OPTABLE(ptn, msk, len, jmp) \
+ { \
+ .bitpattern = ptn, \
+ .bitmask = msk, \
+ .length = len, \
+ .type = jmp, \
+ }
+
+static const struct optable optable_0[] = {
+ OPTABLE(0x00, 0xff, 1, none), /* 0x00 */
+ OPTABLE(0x01, 0xff, -1, none), /* 0x01 */
+ OPTABLE(0x02, 0xfe, 1, none), /* 0x02-0x03 */
+ OPTABLE(0x04, 0xee, 1, none), /* 0x04-0x05/0x14-0x15 */
+ OPTABLE(0x06, 0xfe, 1, none), /* 0x06-0x07 */
+ OPTABLE(0x08, 0xea, 1, none), /* 0x08-0x09/0x0c-0x0d/0x18-0x19/0x1c-0x1d */
+ OPTABLE(0x0a, 0xee, 1, none), /* 0x0a-0x0b/0x1a-0x1b */
+ OPTABLE(0x0e, 0xee, 1, none), /* 0x0e-0x0f/0x1e-0x1f */
+ OPTABLE(0x10, 0xfc, 1, none), /* 0x10-0x13 */
+ OPTABLE(0x16, 0xfe, 1, none), /* 0x16-0x17 */
+ OPTABLE(0x20, 0xe0, 1, none), /* 0x20-0x3f */
+ OPTABLE(0x40, 0xf0, 1, relb), /* 0x40-0x4f */
+ OPTABLE(0x50, 0xfc, 1, none), /* 0x50-0x53 */
+ OPTABLE(0x54, 0xfd, 1, ret), /* 0x54/0x56 */
+ OPTABLE(0x55, 0xff, 1, relb), /* 0x55 */
+ OPTABLE(0x57, 0xff, 1, none), /* 0x57 */
+ OPTABLE(0x58, 0xfb, 2, relw), /* 0x58/0x5c */
+ OPTABLE(0x59, 0xfb, 1, reg), /* 0x59/0x5b */
+ OPTABLE(0x5a, 0xfb, 2, jabs), /* 0x5a/0x5e */
+ OPTABLE(0x5b, 0xfb, 2, ind), /* 0x5b/0x5f */
+ OPTABLE(0x60, 0xe8, 1, none), /* 0x60-0x67/0x70-0x77 */
+ OPTABLE(0x68, 0xfa, 1, none), /* 0x68-0x69/0x6c-0x6d */
+ OPTABLE(0x6a, 0xfe, -2, none), /* 0x6a-0x6b */
+ OPTABLE(0x6e, 0xfe, 2, none), /* 0x6e-0x6f */
+ OPTABLE(0x78, 0xff, 4, none), /* 0x78 */
+ OPTABLE(0x79, 0xff, 2, none), /* 0x79 */
+ OPTABLE(0x7a, 0xff, 3, none), /* 0x7a */
+ OPTABLE(0x7b, 0xff, 2, none), /* 0x7b */
+ OPTABLE(0x7c, 0xfc, 2, none), /* 0x7c-0x7f */
+ OPTABLE(0x80, 0x80, 1, none), /* 0x80-0xff */
+};
+
+static const struct optable optable_1[] = {
+ OPTABLE(0x00, 0xff, -3, none), /* 0x0100 */
+ OPTABLE(0x40, 0xf0, -3, none), /* 0x0140-0x14f */
+ OPTABLE(0x80, 0xf0, 1, none), /* 0x0180-0x018f */
+ OPTABLE(0xc0, 0xc0, 2, none), /* 0x01c0-0x01ff */
+};
+
+static const struct optable optable_2[] = {
+ OPTABLE(0x00, 0x20, 2, none), /* 0x6a0?/0x6a8?/0x6b0?/0x6b8? */
+ OPTABLE(0x20, 0x20, 3, none), /* 0x6a2?/0x6aa?/0x6b2?/0x6ba? */
+};
+
+static const struct optable optable_3[] = {
+ OPTABLE(0x69, 0xfb, 2, none), /* 0x010069/0x01006d/014069/0x01406d */
+ OPTABLE(0x6b, 0xff, -4, none), /* 0x01006b/0x01406b */
+ OPTABLE(0x6f, 0xff, 3, none), /* 0x01006f/0x01406f */
+ OPTABLE(0x78, 0xff, 5, none), /* 0x010078/0x014078 */
+};
+
+static const struct optable optable_4[] = {
+/* 0x0100690?/0x01006d0?/0140690?/0x01406d0?/
+ 0x0100698?/0x01006d8?/0140698?/0x01406d8? */
+ OPTABLE(0x00, 0x78, 3, none),
+/* 0x0100692?/0x01006d2?/0140692?/0x01406d2?/
+ 0x010069a?/0x01006da?/014069a?/0x01406da? */
+ OPTABLE(0x20, 0x78, 4, none),
+};
+
+static const struct optables_list {
+ const struct optable *ptr;
+ int size;
+} optables[] = {
+#define OPTABLES(no) \
+ { \
+ .ptr = optable_##no, \
+ .size = sizeof(optable_##no) / sizeof(struct optable), \
+ }
+ OPTABLES(0),
+ OPTABLES(1),
+ OPTABLES(2),
+ OPTABLES(3),
+ OPTABLES(4),
+
+};
+
+const unsigned char condmask[] = {
+ 0x00, 0x40, 0x01, 0x04, 0x02, 0x08, 0x10, 0x20
+};
+
+static int isbranch(struct task_struct *task, int reson)
+{
+ unsigned char cond = h8300_get_reg(task, PT_CCR);
+
+ /* encode complex conditions */
+ /* B4: N^V
+ B5: Z|(N^V)
+ B6: C|Z */
+ __asm__("bld #3,%w0\n\t"
+ "bxor #1,%w0\n\t"
+ "bst #4,%w0\n\t"
+ "bor #2,%w0\n\t"
+ "bst #5,%w0\n\t"
+ "bld #2,%w0\n\t"
+ "bor #0,%w0\n\t"
+ "bst #6,%w0\n\t"
+ : "=&r"(cond) : "0"(cond) : "cc");
+ cond &= condmask[reson >> 1];
+ if (!(reson & 1))
+ return cond == 0;
+ else
+ return cond != 0;
+}
+
+static unsigned short *decode(struct task_struct *child,
+ const struct optable *op,
+ char *fetch_p, unsigned short *pc,
+ unsigned char inst)
+{
+ unsigned long addr;
+ unsigned long *sp;
+ int regno;
+
+ switch (op->type) {
+ case none:
+ return (unsigned short *)pc + op->length;
+ case jabs:
+ addr = *(unsigned long *)pc;
+ return (unsigned short *)(addr & 0x00ffffff);
+ case ind:
+ addr = *pc & 0xff;
+ return (unsigned short *)(*(unsigned long *)addr);
+ case ret:
+ sp = (unsigned long *)h8300_get_reg(child, PT_USP);
+ /* user stack frames
+ | er0 | temporary saved
+ +--------+
+ | exp | exception stack frames
+ +--------+
+ | ret pc | userspace return address
+ */
+ return (unsigned short *)(*(sp+2) & 0x00ffffff);
+ case reg:
+ regno = (*pc >> 4) & 0x07;
+ if (regno == 0)
+ addr = h8300_get_reg(child, PT_ER0);
+ else
+ addr = h8300_get_reg(child, regno-1 + PT_ER1);
+ return (unsigned short *)addr;
+ case relb:
+ if (inst == 0x55 || isbranch(child, inst & 0x0f))
+ pc = (unsigned short *)((unsigned long)pc +
+ ((signed char)(*fetch_p)));
+ return pc+1; /* skip myself */
+ case relw:
+ if (inst == 0x5c || isbranch(child, (*fetch_p & 0xf0) >> 4))
+ pc = (unsigned short *)((unsigned long)pc +
+ ((signed short)(*(pc+1))));
+ return pc+2; /* skip myself */
+ default:
+ return NULL;
+ }
+}
+
+static unsigned short *nextpc(struct task_struct *child, unsigned short *pc)
+{
+ const struct optable *op;
+ unsigned char *fetch_p;
+ int op_len;
+ unsigned char inst;
+
+ op = optables[0].ptr;
+ op_len = optables[0].size;
+ fetch_p = (unsigned char *)pc;
+ inst = *fetch_p++;
+ do {
+ if ((inst & op->bitmask) == op->bitpattern) {
+ if (op->length < 0) {
+ op = optables[-op->length].ptr;
+ op_len = optables[-op->length].size + 1;
+ inst = *fetch_p++;
+ } else
+ return decode(child, op, fetch_p, pc, inst);
+ } else
+ op++;
+ } while (--op_len > 0);
+ return NULL;
+}
+
+/* Set breakpoint(s) to simulate a single step from the current PC. */
+
+void user_enable_single_step(struct task_struct *child)
+{
+ unsigned short *next;
+
+ next = nextpc(child, (unsigned short *)h8300_get_reg(child, PT_PC));
+ child->thread.breakinfo.addr = next;
+ child->thread.breakinfo.inst = *next;
+ *next = BREAKINST;
+}
+
+asmlinkage void trace_trap(unsigned long bp)
+{
+ if ((unsigned long)current->thread.breakinfo.addr == bp) {
+ user_disable_single_step(current);
+ force_sig(SIGTRAP, current);
+ } else
+ force_sig(SIGILL, current);
+}
diff --git a/arch/h8300/kernel/cpu/ptrace_s.c b/arch/h8300/kernel/cpu/ptrace_s.c
new file mode 100644
index 0000000..ef5a9c1
--- /dev/null
+++ b/arch/h8300/kernel/cpu/ptrace_s.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/h8300/kernel/ptrace_h8s.c
+ * ptrace cpu depend helper functions
+ *
+ * Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of
+ * this archive for more details.
+ */
+
+#include <linux/linkage.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/ptrace.h>
+
+#define CCR_MASK 0x6f
+#define EXR_TRACE 0x80
+
+/* disable singlestep */
+void user_disable_single_step(struct task_struct *child)
+{
+ unsigned char exr;
+
+ exr = h8300_get_reg(child, PT_EXR);
+ exr &= ~EXR_TRACE;
+ h8300_put_reg(child, PT_EXR, exr);
+}
+
+/* enable singlestep */
+void user_enable_single_step(struct task_struct *child)
+{
+ unsigned char exr;
+
+ exr = h8300_get_reg(child, PT_EXR);
+ exr |= EXR_TRACE;
+ h8300_put_reg(child, PT_EXR, exr);
+}
+
+asmlinkage void trace_trap(unsigned long bp)
+{
+ (void)bp;
+ force_sig(SIGTRAP, current);
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 07/17] h8300: miscellaneous functions
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (5 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 06/17] h8300: CPU depend helpers Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 08/17] h8300: Memory management Yoshinori Sato
` (9 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/kernel/asm-offsets.c | 60 ++++++++++++++++++++++++++
arch/h8300/kernel/dma.c | 95 +++++++++++++++++++++++++++++++++++++++++
arch/h8300/kernel/h8300_ksyms.c | 34 +++++++++++++++
arch/h8300/kernel/module.c | 70 ++++++++++++++++++++++++++++++
arch/h8300/kernel/sim-console.c | 79 ++++++++++++++++++++++++++++++++++
arch/h8300/kernel/syscalls.c | 14 ++++++
6 files changed, 352 insertions(+)
create mode 100644 arch/h8300/kernel/asm-offsets.c
create mode 100644 arch/h8300/kernel/dma.c
create mode 100644 arch/h8300/kernel/h8300_ksyms.c
create mode 100644 arch/h8300/kernel/module.c
create mode 100644 arch/h8300/kernel/sim-console.c
create mode 100644 arch/h8300/kernel/syscalls.c
diff --git a/arch/h8300/kernel/asm-offsets.c b/arch/h8300/kernel/asm-offsets.c
new file mode 100644
index 0000000..9fb9d49
--- /dev/null
+++ b/arch/h8300/kernel/asm-offsets.c
@@ -0,0 +1,60 @@
+/*
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ */
+
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/kbuild.h>
+#include <asm/irq.h>
+#include <asm/ptrace.h>
+
+int main(void)
+{
+ /* offsets into the task struct */
+ DEFINE(TASK_STATE, offsetof(struct task_struct, state));
+ DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+ DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+ DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+ DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+ DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
+ DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+ DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+
+ /* offsets into the irq_cpustat_t struct */
+ DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
+
+ /* offsets into the thread struct */
+ DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
+ DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
+ DEFINE(THREAD_CCR, offsetof(struct thread_struct, ccr));
+
+ /* offsets into the pt_regs struct */
+ DEFINE(LER0, offsetof(struct pt_regs, er0) - sizeof(long));
+ DEFINE(LER1, offsetof(struct pt_regs, er1) - sizeof(long));
+ DEFINE(LER2, offsetof(struct pt_regs, er2) - sizeof(long));
+ DEFINE(LER3, offsetof(struct pt_regs, er3) - sizeof(long));
+ DEFINE(LER4, offsetof(struct pt_regs, er4) - sizeof(long));
+ DEFINE(LER5, offsetof(struct pt_regs, er5) - sizeof(long));
+ DEFINE(LER6, offsetof(struct pt_regs, er6) - sizeof(long));
+ DEFINE(LORIG, offsetof(struct pt_regs, orig_er0) - sizeof(long));
+ DEFINE(LSP, offsetof(struct pt_regs, sp) - sizeof(long));
+ DEFINE(LCCR, offsetof(struct pt_regs, ccr) - sizeof(long));
+ DEFINE(LVEC, offsetof(struct pt_regs, vector) - sizeof(long));
+#if defined(CONFIG_CPU_H8S)
+ DEFINE(LEXR, offsetof(struct pt_regs, exr) - sizeof(long));
+#endif
+ DEFINE(LRET, offsetof(struct pt_regs, pc) - sizeof(long));
+
+ DEFINE(PT_PTRACED, PT_PTRACED);
+
+ return 0;
+}
diff --git a/arch/h8300/kernel/dma.c b/arch/h8300/kernel/dma.c
new file mode 100644
index 0000000..061f3c3
--- /dev/null
+++ b/arch/h8300/kernel/dma.c
@@ -0,0 +1,95 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#undef DEBUG
+
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/export.h>
+
+#include <asm/pgalloc.h>
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t gfp)
+{
+ void *ret;
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+ if (dev == NULL || (*dev->dma_mask < 0xffffffff))
+ gfp |= GFP_DMA;
+ ret = (void *)__get_free_pages(gfp, get_order(size));
+
+ if (ret != NULL) {
+ memset(ret, 0, size);
+ *dma_handle = virt_to_phys(ret);
+ }
+ return ret;
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+ free_pages((unsigned long)vaddr, get_order(size));
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
+void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
+ size_t size, enum dma_data_direction dir)
+{
+}
+EXPORT_SYMBOL(dma_sync_single_for_device);
+
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+ int i;
+
+ for (i = 0; i < nents; sg++, i++)
+ dma_sync_single_for_device(dev, sg->dma_address,
+ sg->length, dir);
+}
+EXPORT_SYMBOL(dma_sync_sg_for_device);
+
+dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_addr_t handle = virt_to_bus(addr);
+
+ dma_sync_single_for_device(dev, handle, size, dir);
+ return handle;
+}
+EXPORT_SYMBOL(dma_map_single);
+
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_addr_t handle = page_to_phys(page) + offset;
+
+ dma_sync_single_for_device(dev, handle, size, dir);
+ return handle;
+}
+EXPORT_SYMBOL(dma_map_page);
+
+int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction dir)
+{
+ int i;
+
+ for (i = 0; i < nents; sg++, i++) {
+ sg->dma_address = sg_phys(sg);
+ dma_sync_single_for_device(dev, sg->dma_address,
+ sg->length, dir);
+ }
+ return nents;
+}
+EXPORT_SYMBOL(dma_map_sg);
diff --git a/arch/h8300/kernel/h8300_ksyms.c b/arch/h8300/kernel/h8300_ksyms.c
new file mode 100644
index 0000000..33bf96a
--- /dev/null
+++ b/arch/h8300/kernel/h8300_ksyms.c
@@ -0,0 +1,34 @@
+#include <linux/module.h>
+#include <linux/linkage.h>
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler... (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+asmlinkage long long __ashldi3(long long, int);
+asmlinkage long long __ashrdi3(long long, int);
+asmlinkage long long __lshrdi3(long long, int);
+asmlinkage long __divsi3(long, long);
+asmlinkage long __modsi3(long, long);
+asmlinkage unsigned long __umodsi3(unsigned long, unsigned long);
+asmlinkage long long __muldi3(long long, long long);
+asmlinkage long __mulsi3(long, long);
+asmlinkage long __udivsi3(long, long);
+asmlinkage void *memcpy(void *, const void *, size_t);
+asmlinkage void *memset(void *, int, size_t);
+asmlinkage long strncpy_from_user(void *to, void *from, size_t n);
+
+ /* gcc lib functions */
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__umodsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__mulsi3);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(strncpy_from_user);
diff --git a/arch/h8300/kernel/module.c b/arch/h8300/kernel/module.c
new file mode 100644
index 0000000..515f6c4
--- /dev/null
+++ b/arch/h8300/kernel/module.c
@@ -0,0 +1,70 @@
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
+ /* This is where to make the change */
+ uint32_t *loc =
+ (uint32_t *)(sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rela[i].r_offset);
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ Elf32_Sym *sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rela[i].r_info);
+ uint32_t v = sym->st_value + rela[i].r_addend;
+
+ switch (ELF32_R_TYPE(rela[i].r_info)) {
+ case R_H8_DIR24R8:
+ loc = (uint32_t *)((uint32_t)loc - 1);
+ *loc = (*loc & 0xff000000) | ((*loc & 0xffffff) + v);
+ break;
+ case R_H8_DIR24A8:
+ if (ELF32_R_SYM(rela[i].r_info))
+ *loc += v;
+ break;
+ case R_H8_DIR32:
+ case R_H8_DIR32A16:
+ *loc += v;
+ break;
+ case R_H8_PCREL16:
+ v -= (unsigned long)loc + 2;
+ if ((Elf32_Sword)v > 0x7fff ||
+ (Elf32_Sword)v < -(Elf32_Sword)0x8000)
+ goto overflow;
+ else
+ *(unsigned short *)loc = v;
+ break;
+ case R_H8_PCREL8:
+ v -= (unsigned long)loc + 1;
+ if ((Elf32_Sword)v > 0x7f ||
+ (Elf32_Sword)v < -(Elf32_Sword)0x80)
+ goto overflow;
+ else
+ *(unsigned char *)loc = v;
+ break;
+ default:
+ pr_err("module %s: Unknown relocation: %u\n",
+ me->name, ELF32_R_TYPE(rela[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+ overflow:
+ pr_err("module %s: relocation offset overflow: %08x\n",
+ me->name, rela[i].r_offset);
+ return -ENOEXEC;
+}
diff --git a/arch/h8300/kernel/sim-console.c b/arch/h8300/kernel/sim-console.c
new file mode 100644
index 0000000..a15edf0
--- /dev/null
+++ b/arch/h8300/kernel/sim-console.c
@@ -0,0 +1,79 @@
+/*
+ * arch/h8300/kernel/early_printk.c
+ *
+ * Copyright (C) 2009 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+static void sim_write(struct console *co, const char *ptr,
+ unsigned len)
+{
+ register const int fd __asm__("er0") = 1; /* stdout */
+ register const char *_ptr __asm__("er1") = ptr;
+ register const unsigned _len __asm__("er2") = len;
+
+ __asm__(".byte 0x5e,0x00,0x00,0xc7\n\t" /* jsr @0xc7 (sys_write) */
+ : : "g"(fd), "g"(_ptr), "g"(_len));
+}
+
+static struct console sim_console = {
+ .name = "sim_console",
+ .write = sim_write,
+ .setup = NULL,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static char sim_console_buf[32];
+
+static int sim_probe(struct platform_device *pdev)
+{
+ if (sim_console.data)
+ return -EEXIST;
+
+ if (!strstr(sim_console_buf, "keep"))
+ sim_console.flags |= CON_BOOT;
+
+ register_console(&sim_console);
+ return 0;
+}
+
+static int sim_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver sim_driver = {
+ .probe = sim_probe,
+ .remove = sim_remove,
+ .driver = {
+ .name = "h8300-sim",
+ .owner = THIS_MODULE,
+ },
+};
+
+early_platform_init_buffer("earlyprintk", &sim_driver,
+ sim_console_buf, ARRAY_SIZE(sim_console_buf));
+
+static struct platform_device sim_console_device = {
+ .name = "h8300-sim",
+ .id = 0,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &sim_console_device,
+};
+
+void __init sim_console_register(void)
+{
+ early_platform_add_devices(devices,
+ ARRAY_SIZE(devices));
+}
diff --git a/arch/h8300/kernel/syscalls.c b/arch/h8300/kernel/syscalls.c
new file mode 100644
index 0000000..1f9123a
--- /dev/null
+++ b/arch/h8300/kernel/syscalls.c
@@ -0,0 +1,14 @@
+#include <linux/syscalls.h>
+#include <linux/signal.h>
+#include <linux/unistd.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (call),
+
+#define sys_mmap2 sys_mmap_pgoff
+
+asmlinkage int sys_rt_sigreturn(void);
+
+void *_sys_call_table[__NR_syscalls] = {
+#include <asm/unistd.h>
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 08/17] h8300: Memory management
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (6 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 07/17] h8300: miscellaneous functions Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 09/17] h8300: library functions Yoshinori Sato
` (8 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/mm/Makefile | 5 ++
arch/h8300/mm/fault.c | 57 +++++++++++++++++++++
arch/h8300/mm/init.c | 133 +++++++++++++++++++++++++++++++++++++++++++++++++
arch/h8300/mm/kmap.c | 61 +++++++++++++++++++++++
arch/h8300/mm/memory.c | 53 ++++++++++++++++++++
5 files changed, 309 insertions(+)
create mode 100644 arch/h8300/mm/Makefile
create mode 100644 arch/h8300/mm/fault.c
create mode 100644 arch/h8300/mm/init.c
create mode 100644 arch/h8300/mm/kmap.c
create mode 100644 arch/h8300/mm/memory.c
diff --git a/arch/h8300/mm/Makefile b/arch/h8300/mm/Makefile
new file mode 100644
index 0000000..117d71f
--- /dev/null
+++ b/arch/h8300/mm/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the linux h8300-specific parts of the memory manager.
+#
+
+obj-y := init.o fault.o memory.o kmap.o
diff --git a/arch/h8300/mm/fault.c b/arch/h8300/mm/fault.c
new file mode 100644
index 0000000..5924ff5
--- /dev/null
+++ b/arch/h8300/mm/fault.c
@@ -0,0 +1,57 @@
+/*
+ * linux/arch/h8300/mm/fault.c
+ *
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
+ * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
+ *
+ * Based on:
+ *
+ * linux/arch/m68knommu/mm/fault.c
+ * linux/arch/m68k/mm/fault.c
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+
+#include <asm/pgtable.h>
+
+void die(const char *str, struct pt_regs *fp, unsigned long err);
+
+/*
+ * This routine handles page faults. It determines the problem, and
+ * then passes it off to one of the appropriate routines.
+ *
+ * error_code:
+ * bit 0 == 0 means no page found, 1 means protection fault
+ * bit 1 == 0 means read, 1 means write
+ *
+ * If this routine detects a bad access, it returns 1, otherwise it
+ * returns 0.
+ */
+asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
+{
+#ifdef DEBUG
+ pr_debug("regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
+ regs->sr, regs->pc, address, error_code);
+#endif
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+ if ((unsigned long) address < PAGE_SIZE)
+ pr_alert("Unable to handle kernel NULL pointer dereference");
+ else
+ pr_alert("Unable to handle kernel access");
+ printk(" at virtual address %08lx\n", address);
+ if (!user_mode(regs))
+ die("Oops", regs, error_code);
+ do_exit(SIGKILL);
+
+ return 1;
+}
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
new file mode 100644
index 0000000..98028b1
--- /dev/null
+++ b/arch/h8300/mm/init.c
@@ -0,0 +1,133 @@
+/*
+ * linux/arch/h8300/mm/init.c
+ *
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
+ * Kenneth Albanowski <kjahds@kjahds.com>,
+ * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
+ *
+ * Based on:
+ *
+ * linux/arch/m68knommu/mm/init.c
+ * linux/arch/m68k/mm/init.c
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ *
+ * JAN/1999 -- hacked to support ColdFire (gerg@snapgear.com)
+ * DEC/2000 -- linux 2.4 support <davidm@snapgear.com>
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+#include <linux/gfp.h>
+
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+
+/*
+ * BAD_PAGE is the page that is used for page faults when linux
+ * is out-of-memory. Older versions of linux just did a
+ * do_exit(), but using this instead means there is less risk
+ * for a process dying in kernel mode, possibly leaving a inode
+ * unused etc..
+ *
+ * BAD_PAGETABLE is the accompanying page-table: it is initialized
+ * to point to BAD_PAGE entries.
+ *
+ * ZERO_PAGE is a special page that is used for zero-initialized
+ * data and COW.
+ */
+static unsigned long empty_bad_page_table;
+static unsigned long empty_bad_page;
+unsigned long empty_zero_page;
+
+/*
+ * paging_init() continues the virtual memory environment setup which
+ * was begun by the code in arch/head.S.
+ * The parameters are pointers to where to stick the starting and ending
+ * addresses of available kernel virtual memory.
+ */
+void __init paging_init(void)
+{
+ /*
+ * Make sure start_mem is page aligned, otherwise bootmem and
+ * page_alloc get different views og the world.
+ */
+ unsigned long start_mem = PAGE_ALIGN(memory_start);
+ unsigned long end_mem = memory_end & PAGE_MASK;
+
+ pr_debug("start_mem is %#lx\nvirtual_end is %#lx\n",
+ start_mem, end_mem);
+
+ /*
+ * Initialize the bad page table and bad page to point
+ * to a couple of allocated pages.
+ */
+ empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ memset((void *)empty_zero_page, 0, PAGE_SIZE);
+
+ /*
+ * Set up SFC/DFC registers (user data space).
+ */
+ set_fs(USER_DS);
+
+ pr_debug("before free_area_init\n");
+
+ pr_debug("free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n",
+ start_mem, end_mem);
+
+ {
+ unsigned long zones_size[MAX_NR_ZONES] = {0, };
+
+ zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
+ free_area_init(zones_size);
+ }
+}
+
+void __init mem_init(void)
+{
+ unsigned long codesize = _etext - _stext;
+
+ pr_devel("Mem_init: start=%lx, end=%lx\n", memory_start, memory_end);
+
+ high_memory = (void *) (memory_end & PAGE_MASK);
+ max_mapnr = MAP_NR(high_memory);
+
+ /* this will put all low memory onto the freelists */
+ free_all_bootmem();
+
+ mem_init_print_info(NULL);
+ if (rom_length > 0 && rom_length > codesize)
+ pr_info("Memory available: %luK/%luK ROM\n",
+ (rom_length - codesize) >> 10, rom_length >> 10);
+}
+
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ free_reserved_area((void *)start, (void *)end, -1, "initrd");
+}
+#endif
+
+void
+free_initmem(void)
+{
+ free_initmem_default(-1);
+}
diff --git a/arch/h8300/mm/kmap.c b/arch/h8300/mm/kmap.c
new file mode 100644
index 0000000..4315aa3
--- /dev/null
+++ b/arch/h8300/mm/kmap.c
@@ -0,0 +1,61 @@
+/*
+ * linux/arch/h8300/mm/kmap.c
+ *
+ * Based on
+ * linux/arch/m68knommu/mm/kmap.c
+ *
+ * Copyright (C) 2000 Lineo, <davidm@snapgear.com>
+ * Copyright (C) 2000-2002 David McCullough <davidm@snapgear.com>
+ */
+
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/io.h>
+
+#undef DEBUG
+
+#define VIRT_OFFSET (0x01000000)
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
+{
+ return (void *)(physaddr + VIRT_OFFSET);
+}
+EXPORT_SYMBOL(__ioremap);
+
+/*
+ * Unmap a ioremap()ed region again.
+ */
+void iounmap(void *addr)
+{
+}
+EXPORT_SYMBOL(iounmap);
+
+/*
+ * __iounmap unmaps nearly everything, so be careful
+ * it doesn't free currently pointer/page tables anymore but it
+ * wans't used anyway and might be added later.
+ */
+void __iounmap(void *addr, unsigned long size)
+{
+}
+
+/*
+ * Set new cache mode for some kernel address space.
+ * The caller must push data for that range itself, if such data may already
+ * be in the cache.
+ */
+void kernel_set_cachemode(void *addr, unsigned long size, int cmode)
+{
+}
diff --git a/arch/h8300/mm/memory.c b/arch/h8300/mm/memory.c
new file mode 100644
index 0000000..4974aa4
--- /dev/null
+++ b/arch/h8300/mm/memory.c
@@ -0,0 +1,53 @@
+/*
+ * linux/arch/h8300/mm/memory.c
+ *
+ * Copyright (C) 2002 Yoshinori Sato <ysato@users.sourceforge.jp>,
+ *
+ * Based on:
+ *
+ * linux/arch/m68knommu/mm/memory.c
+ *
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ * Based on:
+ *
+ * linux/arch/m68k/mm/memory.c
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/traps.h>
+#include <asm/io.h>
+
+void cache_clear(unsigned long paddr, int len)
+{
+}
+
+
+void cache_push(unsigned long paddr, int len)
+{
+}
+
+void cache_push_v(unsigned long vaddr, int len)
+{
+}
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+
+unsigned long kernel_map(unsigned long paddr, unsigned long size,
+ int nocacheflag, unsigned long *memavailp)
+{
+ return paddr;
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 09/17] h8300: library functions
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (7 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 08/17] h8300: Memory management Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 10/17] h8300: Build scripts Yoshinori Sato
` (7 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
h8300 assembly functions and private libgcc.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/lib/Makefile | 7 ++
arch/h8300/lib/abs.S | 20 ++++++
arch/h8300/lib/ashldi3.c | 24 +++++++
arch/h8300/lib/ashrdi3.c | 24 +++++++
arch/h8300/lib/checksum.c | 167 +++++++++++++++++++++++++++++++++++++++++++++
arch/h8300/lib/libgcc.h | 77 +++++++++++++++++++++
arch/h8300/lib/lshrdi3.c | 23 +++++++
arch/h8300/lib/memcpy.S | 85 +++++++++++++++++++++++
arch/h8300/lib/memset.S | 69 +++++++++++++++++++
arch/h8300/lib/moddivsi3.S | 72 +++++++++++++++++++
arch/h8300/lib/modsi3.S | 72 +++++++++++++++++++
arch/h8300/lib/muldi3.c | 44 ++++++++++++
arch/h8300/lib/mulsi3.S | 38 +++++++++++
arch/h8300/lib/strncpy.S | 34 +++++++++
arch/h8300/lib/ucmpdi2.c | 17 +++++
arch/h8300/lib/udivsi3.S | 76 +++++++++++++++++++++
16 files changed, 849 insertions(+)
create mode 100644 arch/h8300/lib/Makefile
create mode 100644 arch/h8300/lib/abs.S
create mode 100644 arch/h8300/lib/ashldi3.c
create mode 100644 arch/h8300/lib/ashrdi3.c
create mode 100644 arch/h8300/lib/checksum.c
create mode 100644 arch/h8300/lib/libgcc.h
create mode 100644 arch/h8300/lib/lshrdi3.c
create mode 100644 arch/h8300/lib/memcpy.S
create mode 100644 arch/h8300/lib/memset.S
create mode 100644 arch/h8300/lib/moddivsi3.S
create mode 100644 arch/h8300/lib/modsi3.S
create mode 100644 arch/h8300/lib/muldi3.c
create mode 100644 arch/h8300/lib/mulsi3.S
create mode 100644 arch/h8300/lib/strncpy.S
create mode 100644 arch/h8300/lib/ucmpdi2.c
create mode 100644 arch/h8300/lib/udivsi3.S
diff --git a/arch/h8300/lib/Makefile b/arch/h8300/lib/Makefile
new file mode 100644
index 0000000..8311a9f
--- /dev/null
+++ b/arch/h8300/lib/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for H8/300-specific library files..
+#
+
+lib-y = checksum.o memcpy.o memset.o abs.o strncpy.o \
+ mulsi3.o udivsi3.o muldi3.o moddivsi3.o \
+ ashldi3.o lshrdi3.o ashrdi3.o ucmpdi2.o
diff --git a/arch/h8300/lib/abs.S b/arch/h8300/lib/abs.S
new file mode 100644
index 0000000..efda749
--- /dev/null
+++ b/arch/h8300/lib/abs.S
@@ -0,0 +1,20 @@
+;;; abs.S
+
+#include <asm/linkage.h>
+
+#if defined(CONFIG_CPU_H8300H)
+ .h8300h
+#endif
+#if defined(CONFIG_CPU_H8S)
+ .h8300s
+#endif
+ .text
+.global _abs
+
+;;; int abs(int n)
+_abs:
+ mov.l er0,er0
+ bpl 1f
+ neg.l er0
+1:
+ rts
diff --git a/arch/h8300/lib/ashldi3.c b/arch/h8300/lib/ashldi3.c
new file mode 100644
index 0000000..c6aa8ea
--- /dev/null
+++ b/arch/h8300/lib/ashldi3.c
@@ -0,0 +1,24 @@
+#include "libgcc.h"
+
+DWtype
+__ashldi3(DWtype u, word_type b)
+{
+ const DWunion uu = {.ll = u};
+ const word_type bm = (sizeof (Wtype) * BITS_PER_UNIT) - b;
+ DWunion w;
+
+ if (b == 0)
+ return u;
+
+ if (bm <= 0) {
+ w.s.low = 0;
+ w.s.high = (UWtype) uu.s.low << -bm;
+ } else {
+ const UWtype carries = (UWtype) uu.s.low >> bm;
+
+ w.s.low = (UWtype) uu.s.low << b;
+ w.s.high = ((UWtype) uu.s.high << b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/h8300/lib/ashrdi3.c b/arch/h8300/lib/ashrdi3.c
new file mode 100644
index 0000000..070adf9
--- /dev/null
+++ b/arch/h8300/lib/ashrdi3.c
@@ -0,0 +1,24 @@
+#include "libgcc.h"
+
+DWtype __ashrdi3(DWtype u, word_type b)
+{
+ const DWunion uu = {.ll = u};
+ const word_type bm = (sizeof (Wtype) * BITS_PER_UNIT) - b;
+ DWunion w;
+
+ if (b == 0)
+ return u;
+
+ if (bm <= 0) {
+ /* w.s.high = 1..1 or 0..0 */
+ w.s.high = uu.s.high >> (sizeof (Wtype) * BITS_PER_UNIT - 1);
+ w.s.low = uu.s.high >> -bm;
+ } else {
+ const UWtype carries = (UWtype) uu.s.high << bm;
+
+ w.s.high = uu.s.high >> b;
+ w.s.low = ((UWtype) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/h8300/lib/checksum.c b/arch/h8300/lib/checksum.c
new file mode 100644
index 0000000..ae28469
--- /dev/null
+++ b/arch/h8300/lib/checksum.c
@@ -0,0 +1,167 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * IP/TCP/UDP checksumming routines
+ *
+ * Authors: Jorge Cwik, <jorge@laser.satlink.net>
+ * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ * Tom May, <ftom@netcom.com>
+ * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
+ * Lots of code moved from tcp.c and ip.c; see those files
+ * for more names.
+ *
+ * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek:
+ * Fixed some nasty bugs, causing some horrible crashes.
+ * A: At some points, the sum (%0) was used as
+ * length-counter instead of the length counter
+ * (%1). Thanks to Roman Hodek for pointing this out.
+ * B: GCC seems to mess up if one uses too many
+ * data-registers to hold input values and one tries to
+ * specify d0 and d1 as scratch registers. Letting gcc choose these
+ * registers itself solves the problem.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most
+ of the assembly has to go. */
+
+#include <net/checksum.h>
+#include <linux/module.h>
+
+static inline unsigned short from32to16(unsigned long x)
+{
+ /* add up 16-bit and 16-bit for 16+c bit */
+ x = (x & 0xffff) + (x >> 16);
+ /* add up carry.. */
+ x = (x & 0xffff) + (x >> 16);
+ return x;
+}
+
+static unsigned long do_csum(const unsigned char *buff, int len)
+{
+ int odd, count;
+ unsigned long result = 0;
+
+ if (len <= 0)
+ goto out;
+ odd = 1 & (unsigned long) buff;
+ if (odd) {
+ result = *buff;
+ len--;
+ buff++;
+ }
+ count = len >> 1; /* nr of 16-bit words.. */
+ if (count) {
+ if (2 & (unsigned long) buff) {
+ result += *(unsigned short *) buff;
+ count--;
+ len -= 2;
+ buff += 2;
+ }
+ count >>= 1; /* nr of 32-bit words.. */
+ if (count) {
+ unsigned long carry = 0;
+
+ do {
+ unsigned long w = *(unsigned long *) buff;
+
+ count--;
+ buff += 4;
+ result += carry;
+ result += w;
+ carry = (w > result);
+ } while (count);
+ result += carry;
+ result = (result & 0xffff) + (result >> 16);
+ }
+ if (len & 2) {
+ result += *(unsigned short *) buff;
+ buff += 2;
+ }
+ }
+ if (len & 1)
+ result += (*buff << 8);
+ result = from32to16(result);
+ if (odd)
+ result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
+out:
+ return result;
+}
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ return (__force __sum16)~do_csum(iph, ihl*4);
+}
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+/*
+ * Egads... That thing apparently assumes that *all* checksums it ever sees will
+ * be folded. Very likely a bug.
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum)
+{
+ unsigned int result = do_csum(buff, len);
+
+ /* add in old sum, and carry.. */
+ result += (__force u32)sum;
+ /* 16+c bits -> 16 bits */
+ result = (result & 0xffff) + (result >> 16);
+ return (__force __wsum)result;
+}
+
+EXPORT_SYMBOL(csum_partial);
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+__sum16 ip_compute_csum(const void *buff, int len)
+{
+ return (__force __sum16)~do_csum(buff, len);
+}
+
+/*
+ * copy from fs while checksumming, otherwise like csum_partial
+ */
+
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+ __wsum sum, int *csum_err)
+{
+ if (csum_err)
+ *csum_err = 0;
+ memcpy(dst, (__force const void *)src, len);
+ return csum_partial(dst, len, sum);
+}
+
+/*
+ * copy from ds while checksumming, otherwise like csum_partial
+ */
+
+__wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
+{
+ memcpy(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
diff --git a/arch/h8300/lib/libgcc.h b/arch/h8300/lib/libgcc.h
new file mode 100644
index 0000000..468a8f7
--- /dev/null
+++ b/arch/h8300/lib/libgcc.h
@@ -0,0 +1,77 @@
+#ifndef __H8300_LIBGCC_H__
+#define __H8300_LIBGCC_H__
+
+#ifdef __ASSEMBLY__
+#define A0 r0
+#define A0L r0l
+#define A0H r0h
+
+#define A1 r1
+#define A1L r1l
+#define A1H r1h
+
+#define A2 r2
+#define A2L r2l
+#define A2H r2h
+
+#define A3 r3
+#define A3L r3l
+#define A3H r3h
+
+#define S0 r4
+#define S0L r4l
+#define S0H r4h
+
+#define S1 r5
+#define S1L r5l
+#define S1H r5h
+
+#define S2 r6
+#define S2L r6l
+#define S2H r6h
+
+#define PUSHP push.l
+#define POPP pop.l
+
+#define A0P er0
+#define A1P er1
+#define A2P er2
+#define A3P er3
+#define S0P er4
+#define S1P er5
+#define S2P er6
+
+#define A0E e0
+#define A1E e1
+#define A2E e2
+#define A3E e3
+#else
+#define Wtype SItype
+#define UWtype USItype
+#define HWtype SItype
+#define UHWtype USItype
+#define DWtype DItype
+#define UDWtype UDItype
+#define UWtype USItype
+#define Wtype SItype
+#define UWtype USItype
+#define W_TYPE_SIZE (4 * BITS_PER_UNIT)
+#define BITS_PER_UNIT (8)
+
+typedef int SItype __attribute__ ((mode (SI)));
+typedef unsigned int USItype __attribute__ ((mode (SI)));
+typedef int DItype __attribute__ ((mode (DI)));
+typedef unsigned int UDItype __attribute__ ((mode (DI)));
+struct DWstruct {
+ Wtype high, low;
+};
+typedef union {
+ struct DWstruct s;
+ DWtype ll;
+} DWunion;
+
+typedef int word_type __attribute__ ((mode (__word__)));
+
+#endif
+
+#endif
diff --git a/arch/h8300/lib/lshrdi3.c b/arch/h8300/lib/lshrdi3.c
new file mode 100644
index 0000000..a86bbe3
--- /dev/null
+++ b/arch/h8300/lib/lshrdi3.c
@@ -0,0 +1,23 @@
+#include "libgcc.h"
+
+DWtype __lshrdi3(DWtype u, word_type b)
+{
+ const DWunion uu = {.ll = u};
+ const word_type bm = (sizeof (Wtype) * BITS_PER_UNIT) - b;
+ DWunion w;
+
+ if (b == 0)
+ return u;
+
+ if (bm <= 0) {
+ w.s.high = 0;
+ w.s.low = (UWtype) uu.s.high >> -bm;
+ } else {
+ const UWtype carries = (UWtype) uu.s.high << bm;
+
+ w.s.high = (UWtype) uu.s.high >> b;
+ w.s.low = ((UWtype) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/h8300/lib/memcpy.S b/arch/h8300/lib/memcpy.S
new file mode 100644
index 0000000..0c9a51f
--- /dev/null
+++ b/arch/h8300/lib/memcpy.S
@@ -0,0 +1,85 @@
+;;; memcpy.S
+
+#include <asm/linkage.h>
+
+#if defined(CONFIG_CPU_H8300H)
+ .h8300h
+#endif
+#if defined(CONFIG_CPU_H8S)
+ .h8300s
+#endif
+ .text
+.global memcpy
+
+;;; void *memcpy(void *to, void *from, size_t n)
+memcpy:
+ mov.l er2,er2
+ bne 1f
+ rts
+1:
+ ;; address check
+ bld #0,r0l
+ bxor #0,r1l
+ bcs 4f
+ mov.l er4,@-sp
+ mov.l er0,@-sp
+ btst #0,r0l
+ beq 1f
+ ;; (aligned even) odd address
+ mov.b @er1,r3l
+ mov.b r3l,@er0
+ adds #1,er1
+ adds #1,er0
+ dec.l #1,er2
+ beq 3f
+1:
+ ;; n < sizeof(unsigned long) check
+ sub.l er4,er4
+ adds #4,er4 ; loop count check value
+ cmp.l er4,er2
+ blo 2f
+ ;; unsigned long copy
+1:
+ mov.l @er1,er3
+ mov.l er3,@er0
+ adds #4,er0
+ adds #4,er1
+ subs #4,er2
+ cmp.l er4,er2
+ bcc 1b
+ ;; rest
+2:
+ mov.l er2,er2
+ beq 3f
+1:
+ mov.b @er1,r3l
+ mov.b r3l,@er0
+ adds #1,er1
+ adds #1,er0
+ dec.l #1,er2
+ bne 1b
+3:
+ mov.l @sp+,er0
+ mov.l @sp+,er4
+ rts
+
+ ;; odd <- even / even <- odd
+4:
+ mov.l er4,er3
+ mov.l er2,er4
+ mov.l er5,er2
+ mov.l er1,er5
+ mov.l er6,er1
+ mov.l er0,er6
+1:
+ eepmov.w
+ mov.w r4,r4
+ bne 1b
+ dec.w #1,e4
+ bpl 1b
+ mov.l er1,er6
+ mov.l er2,er5
+ mov.l er3,er4
+ rts
+
+ .end
diff --git a/arch/h8300/lib/memset.S b/arch/h8300/lib/memset.S
new file mode 100644
index 0000000..18d4e70
--- /dev/null
+++ b/arch/h8300/lib/memset.S
@@ -0,0 +1,69 @@
+/* memset.S */
+
+#include <asm/linkage.h>
+
+#if defined(CONFIG_CPU_H8300H)
+ .h8300h
+#endif
+#if defined(CONFIG_CPU_H8S)
+ .h8300s
+#endif
+ .text
+
+.global memset
+.global clear_user
+
+;;void *memset(*ptr, int c, size_t count)
+;; ptr = er0
+;; c = er1(r1l)
+;; count = er2
+memset:
+ btst #0,r0l
+ beq 2f
+
+ ;; odd address
+1:
+ mov.b r1l,@er0
+ adds #1,er0
+ dec.l #1,er2
+ beq 6f
+
+ ;; even address
+2:
+ mov.l er2,er3
+ cmp.l #4,er2
+ blo 4f
+ ;; count>=4 -> count/4
+#if defined(CONFIG_CPU_H8300H)
+ shlr.l er2
+ shlr.l er2
+#endif
+#if defined(CONFIG_CPU_H8S)
+ shlr.l #2,er2
+#endif
+ ;; byte -> long
+ mov.b r1l,r1h
+ mov.w r1,e1
+3:
+ mov.l er1,@er0
+ adds #4,er0
+ dec.l #1,er2
+ bne 3b
+4:
+ ;; count % 4
+ and.b #3,r3l
+ beq 6f
+5:
+ mov.b r1l,@er0
+ adds #1,er0
+ dec.b r3l
+ bne 5b
+6:
+ rts
+
+clear_user:
+ mov.l er1, er2
+ sub.l er1, er1
+ bra memset
+
+ .end
diff --git a/arch/h8300/lib/moddivsi3.S b/arch/h8300/lib/moddivsi3.S
new file mode 100644
index 0000000..c803129
--- /dev/null
+++ b/arch/h8300/lib/moddivsi3.S
@@ -0,0 +1,72 @@
+#include "libgcc.h"
+
+; numerator in A0/A1
+; denominator in A2/A3
+ .global __modsi3
+__modsi3:
+ PUSHP S2P
+ bsr modnorm
+ bsr __divsi3
+ mov.l er3,er0
+ bra exitdiv
+
+ .global __umodsi3
+__umodsi3:
+ bsr __udivsi3:16
+ mov.l er3,er0
+ rts
+
+ .global __divsi3
+__divsi3:
+ PUSHP S2P
+ bsr divnorm
+ bsr __udivsi3:16
+
+ ; examine what the sign should be
+exitdiv:
+ btst #3,S2L
+ beq reti
+
+ ; should be -ve
+ neg.l A0P
+
+reti:
+ POPP S2P
+ rts
+
+divnorm:
+ mov.l A0P,A0P ; is the numerator -ve
+ stc ccr,S2L ; keep the sign in bit 3 of S2L
+ bge postive
+
+ neg.l A0P ; negate arg
+
+postive:
+ mov.l A1P,A1P ; is the denominator -ve
+ bge postive2
+
+ neg.l A1P ; negate arg
+ xor.b #0x08,S2L ; toggle the result sign
+
+postive2:
+ rts
+
+;; Basically the same, except that the sign of the divisor determines
+;; the sign.
+modnorm:
+ mov.l A0P,A0P ; is the numerator -ve
+ stc ccr,S2L ; keep the sign in bit 3 of S2L
+ bge mpostive
+
+ neg.l A0P ; negate arg
+
+mpostive:
+ mov.l A1P,A1P ; is the denominator -ve
+ bge mpostive2
+
+ neg.l A1P ; negate arg
+
+mpostive2:
+ rts
+
+ .end
diff --git a/arch/h8300/lib/modsi3.S b/arch/h8300/lib/modsi3.S
new file mode 100644
index 0000000..68b1dfc
--- /dev/null
+++ b/arch/h8300/lib/modsi3.S
@@ -0,0 +1,72 @@
+#include "libgcc.h"
+
+; numerator in A0/A1
+; denominator in A2/A3
+ .global __modsi3
+__modsi3:
+ PUSHP S2P
+ bsr modnorm
+ bsr __divsi3
+ mov.l er3,er0
+ bra exitdiv
+
+ .global __umodsi3
+__umodsi3:
+ bsr __udivsi3
+ mov.l er3,er0
+ rts
+
+ .global __divsi3
+__divsi3:
+ PUSHP S2P
+ jsr divnorm
+ bsr __udivsi3
+
+ ; examine what the sign should be
+exitdiv:
+ btst #3,S2L
+ beq reti
+
+ ; should be -ve
+ neg.l A0P
+
+reti:
+ POPP S2P
+ rts
+
+divnorm:
+ mov.l A0P,A0P ; is the numerator -ve
+ stc ccr,S2L ; keep the sign in bit 3 of S2L
+ bge postive
+
+ neg.l A0P ; negate arg
+
+postive:
+ mov.l A1P,A1P ; is the denominator -ve
+ bge postive2
+
+ neg.l A1P ; negate arg
+ xor.b #0x08,S2L ; toggle the result sign
+
+postive2:
+ rts
+
+;; Basically the same, except that the sign of the divisor determines
+;; the sign.
+modnorm:
+ mov.l A0P,A0P ; is the numerator -ve
+ stc ccr,S2L ; keep the sign in bit 3 of S2L
+ bge mpostive
+
+ neg.l A0P ; negate arg
+
+mpostive:
+ mov.l A1P,A1P ; is the denominator -ve
+ bge mpostive2
+
+ neg.l A1P ; negate arg
+
+mpostive2:
+ rts
+
+ .end
diff --git a/arch/h8300/lib/muldi3.c b/arch/h8300/lib/muldi3.c
new file mode 100644
index 0000000..7905122
--- /dev/null
+++ b/arch/h8300/lib/muldi3.c
@@ -0,0 +1,44 @@
+#include "libgcc.h"
+
+#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
+#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
+
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ UWtype __x0, __x1, __x2, __x3; \
+ UHWtype __ul, __vl, __uh, __vh; \
+ __ul = __ll_lowpart(u); \
+ __uh = __ll_highpart(u); \
+ __vl = __ll_lowpart(v); \
+ __vh = __ll_highpart(v); \
+ __x0 = (UWtype) __ul * __vl; \
+ __x1 = (UWtype) __ul * __vh; \
+ __x2 = (UWtype) __uh * __vl; \
+ __x3 = (UWtype) __uh * __vh; \
+ __x1 += __ll_highpart(__x0); \
+ __x1 += __x2; \
+ if (__x1 < __x2) \
+ __x3 += __ll_B; \
+ (w1) = __x3 + __ll_highpart(__x1); \
+ (w0) = __ll_lowpart(__x1) * __ll_B + __ll_lowpart(__x0); \
+ } while (0)
+
+#define __umulsidi3(u, v) ( \
+ { \
+ DWunion __w; \
+ umul_ppmm(__w.s.high, __w.s.low, u, v); \
+ __w.ll; } \
+ )
+
+DWtype __muldi3(DWtype u, DWtype v)
+{
+ const DWunion uu = {.ll = u};
+ const DWunion vv = {.ll = v};
+ DWunion w = {.ll = __umulsidi3(uu.s.low, vv.s.low)};
+
+ w.s.high += ((UWtype) uu.s.low * (UWtype) vv.s.high
+ + (UWtype) uu.s.high * (UWtype) vv.s.low);
+
+ return w.ll;
+}
diff --git a/arch/h8300/lib/mulsi3.S b/arch/h8300/lib/mulsi3.S
new file mode 100644
index 0000000..451f0e0
--- /dev/null
+++ b/arch/h8300/lib/mulsi3.S
@@ -0,0 +1,38 @@
+;
+; mulsi3 for H8/300H - based on Renesas SH implementation
+;
+; by Toshiyasu Morita
+;
+; Old code:
+;
+; 16b * 16b = 372 states (worst case)
+; 32b * 32b = 724 states (worst case)
+;
+; New code:
+;
+; 16b * 16b = 48 states
+; 16b * 32b = 72 states
+; 32b * 32b = 92 states
+;
+
+ .global __mulsi3
+__mulsi3:
+ mov.w r1,r2 ; ( 2 states) b * d
+ mulxu r0,er2 ; (22 states)
+
+ mov.w e0,r3 ; ( 2 states) a * d
+ beq L_skip1 ; ( 4 states)
+ mulxu r1,er3 ; (22 states)
+ add.w r3,e2 ; ( 2 states)
+
+L_skip1:
+ mov.w e1,r3 ; ( 2 states) c * b
+ beq L_skip2 ; ( 4 states)
+ mulxu r0,er3 ; (22 states)
+ add.w r3,e2 ; ( 2 states)
+
+L_skip2:
+ mov.l er2,er0 ; ( 2 states)
+ rts ; (10 states)
+
+ .end
diff --git a/arch/h8300/lib/strncpy.S b/arch/h8300/lib/strncpy.S
new file mode 100644
index 0000000..d00396a
--- /dev/null
+++ b/arch/h8300/lib/strncpy.S
@@ -0,0 +1,34 @@
+;;; strncpy.S
+
+#include <asm/linkage.h>
+
+ .text
+.global strncpy_from_user
+
+;;; long strncpy_from_user(void *to, void *from, size_t n)
+strncpy_from_user:
+ mov.l er2,er2
+ bne 1f
+ sub.l er0,er0
+ rts
+1:
+ mov.l er4,@-sp
+ sub.l er3,er3
+2:
+ mov.b @er1+,r4l
+ mov.b r4l,@er0
+ adds #1,er0
+ beq 3f
+ inc.l #1,er3
+ dec.l #1,er2
+ bne 2b
+3:
+ dec.l #1,er2
+4:
+ mov.b r4l,@er0
+ adds #1,er0
+ dec.l #1,er2
+ bne 4b
+ mov.l er3,er0
+ mov.l @sp+,er4
+ rts
diff --git a/arch/h8300/lib/ucmpdi2.c b/arch/h8300/lib/ucmpdi2.c
new file mode 100644
index 0000000..772399d
--- /dev/null
+++ b/arch/h8300/lib/ucmpdi2.c
@@ -0,0 +1,17 @@
+#include "libgcc.h"
+
+word_type __ucmpdi2(DWtype a, DWtype b)
+{
+ const DWunion au = {.ll = a};
+ const DWunion bu = {.ll = b};
+
+ if ((UWtype) au.s.high < (UWtype) bu.s.high)
+ return 0;
+ else if ((UWtype) au.s.high > (UWtype) bu.s.high)
+ return 2;
+ if ((UWtype) au.s.low < (UWtype) bu.s.low)
+ return 0;
+ else if ((UWtype) au.s.low > (UWtype) bu.s.low)
+ return 2;
+ return 1;
+}
diff --git a/arch/h8300/lib/udivsi3.S b/arch/h8300/lib/udivsi3.S
new file mode 100644
index 0000000..bbe6561
--- /dev/null
+++ b/arch/h8300/lib/udivsi3.S
@@ -0,0 +1,76 @@
+#include "libgcc.h"
+
+ ;; This function also computes the remainder and stores it in er3.
+ .global __udivsi3
+__udivsi3:
+ mov.w A1E,A1E ; denominator top word 0?
+ bne DenHighNonZero
+
+ ; do it the easy way, see page 107 in manual
+ mov.w A0E,A2
+ extu.l A2P
+ divxu.w A1,A2P
+ mov.w A2E,A0E
+ divxu.w A1,A0P
+ mov.w A0E,A3
+ mov.w A2,A0E
+ extu.l A3P
+ rts
+
+ ; er0 = er0 / er1
+ ; er3 = er0 % er1
+ ; trashes er1 er2
+ ; expects er1 >= 2^16
+DenHighNonZero:
+ mov.l er0,er3
+ mov.l er1,er2
+#ifdef CONFIG_CPU_H8300H
+divmod_L21:
+ shlr.l er0
+ shlr.l er2 ; make divisor < 2^16
+ mov.w e2,e2
+ bne divmod_L21
+#else
+ shlr.l #2,er2 ; make divisor < 2^16
+ mov.w e2,e2
+ beq divmod_L22A
+divmod_L21:
+ shlr.l #2,er0
+divmod_L22:
+ shlr.l #2,er2 ; make divisor < 2^16
+ mov.w e2,e2
+ bne divmod_L21
+divmod_L22A:
+ rotxl.w r2
+ bcs divmod_L23
+ shlr.l er0
+ bra divmod_L24
+divmod_L23:
+ rotxr.w r2
+ shlr.l #2,er0
+divmod_L24:
+#endif
+ ;; At this point,
+ ;; er0 contains shifted dividend
+ ;; er1 contains divisor
+ ;; er2 contains shifted divisor
+ ;; er3 contains dividend, later remainder
+ divxu.w r2,er0 ; r0 now contains the approximate quotient (AQ)
+ extu.l er0
+ beq divmod_L25
+ subs #1,er0 ; er0 = AQ - 1
+ mov.w e1,r2
+ mulxu.w r0,er2 ; er2 = upper (AQ - 1) * divisor
+ sub.w r2,e3 ; dividend - 65536 * er2
+ mov.w r1,r2
+ mulxu.w r0,er2 ; compute er3 = remainder (tentative)
+ sub.l er2,er3 ; er3 = dividend - (AQ - 1) * divisor
+divmod_L25:
+ cmp.l er1,er3 ; is divisor < remainder?
+ blo divmod_L26
+ adds #1,er0
+ sub.l er1,er3 ; correct the remainder
+divmod_L26:
+ rts
+
+ .end
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 10/17] h8300: Build scripts
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (8 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 09/17] h8300: library functions Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 11/17] h8300: clock driver Yoshinori Sato
` (6 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
h8300's Makefile, Kconfig and memory layout.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/Kconfig | 73 ++++++++++++++++++++++++++
arch/h8300/Kconfig.cpu | 111 ++++++++++++++++++++++++++++++++++++++++
arch/h8300/Makefile | 45 ++++++++++++++++
arch/h8300/kernel/Makefile | 16 ++++++
arch/h8300/kernel/vmlinux.lds.S | 67 ++++++++++++++++++++++++
5 files changed, 312 insertions(+)
create mode 100644 arch/h8300/Kconfig
create mode 100644 arch/h8300/Kconfig.cpu
create mode 100644 arch/h8300/Makefile
create mode 100644 arch/h8300/kernel/Makefile
create mode 100644 arch/h8300/kernel/vmlinux.lds.S
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
new file mode 100644
index 0000000..9e352e6
--- /dev/null
+++ b/arch/h8300/Kconfig
@@ -0,0 +1,73 @@
+config H8300
+ bool
+ default y
+ select GENERIC_ATOMIC64
+ select HAVE_UID16
+ select VIRT_TO_BUS
+ select ARCH_WANT_IPC_PARSE_VERSION
+ select GENERIC_IRQ_SHOW
+ select FRAME_POINTER
+ select GENERIC_CPU_DEVICES
+ select MODULES_USE_ELF_RELA
+ select GENERIC_CLOCKEVENTS
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select ARCH_WANT_FRAME_POINTERS
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config NO_IOPORT_MAP
+ def_bool y
+
+config HZ
+ int
+ default 100
+
+config NR_CPUS
+ int
+ default 1
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+source "arch/h8300/Kconfig.cpu"
+
+menu "Kernel Features"
+
+source "kernel/Kconfig.preempt"
+
+source "mm/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+endmenu
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu
new file mode 100644
index 0000000..fdacf92
--- /dev/null
+++ b/arch/h8300/Kconfig.cpu
@@ -0,0 +1,111 @@
+config CPU_H8300H
+ bool
+
+config CPU_H8S
+ bool
+
+config H83069
+ bool
+ select CPU_H8300H
+ select H8300_TMR16
+
+config H8S2678
+ bool
+ select CPU_H8S
+ select H8300_TPU
+
+config RAMKERNEL
+ bool
+
+config ROMKERNEL
+ bool
+
+menu "Processor type and features"
+
+choice
+prompt "H8/300 platform"
+
+config H8300_AE3068
+ bool "AE-3068/69"
+ select H83069
+ select RAMKERNEL
+ help
+ AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
+ More Information. (Japanese Only)
+ <http://akizukidenshi.com/catalog/default.aspx>
+ AE-3068/69 Evaluation Board Support
+ More Information.
+ <http://www.microtronique.com/ae3069lan.htm>
+
+config H8300_H8MAX
+ bool "H8MAX"
+ select H83069
+ select RAMKERNEL
+ select HAVE_IDE
+ help
+ H8MAX Evaluation Board Support
+ More Information. (Japanese Only)
+ <http://strawberry-linux.com/h8/index.html>
+
+config H8300_KANEBEBE
+ bool "KaneBebe"
+ select H83069
+ select RAMKERNEL
+ help
+ KaneBebe Evalition Board Support
+ More Information. (Japanese Only)
+ <http://www.nissin-tech.com/2009/10/uclinuxkane-bebe-h83069f.html>
+
+config H8300H_SIM
+ bool "H8/300H GDB Simulator"
+ select H83069
+ select ROMKERNEL
+ help
+ GDB Simulator Support
+ More Information.
+ <http://sourceware.org/sid/>
+
+config H8S_EDOSK2674
+ bool "EDOSK-2674"
+ select H8S2678
+ select RAMKERNEL
+ help
+ Renesas EDOSK-2674 Evaluation Board Support
+ More Information.
+ <http://www.azpower.com/H8-uClinux/index.html>
+ <http://www.renesas.eu/products/tools/introductory_evaluation_tools/evaluation_development_os_kits/edosk2674r/edosk2674r_software_tools_root.jsp>
+
+config H8S_SIM
+ bool "H8S GDB Simulator"
+ select H8S2678
+ select ROMKERNEL
+ help
+ GDB Simulator Support
+ More Information.
+ <http://sourceware.org/sid/>
+
+endchoice
+
+if ROMKERNEL
+config CPU_CLOCK
+ int "CPU Clock Frequency"
+ help
+ CPU Clock Frequency
+
+config ROMSIZE
+ hex "ROM size"
+ default 0x200000
+
+config RAMSIZE
+ hex "RAM size"
+endif
+
+config RAMBASE
+ hex "RAM base address"
+ default 0x400000
+
+config OFFSET
+ hex "Load offset"
+ default 0
+
+endmenu
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
new file mode 100644
index 0000000..44e915c
--- /dev/null
+++ b/arch/h8300/Makefile
@@ -0,0 +1,45 @@
+#
+# arch/h8300/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# (C) Copyright 2002-2015 Yoshinori Sato <ysato@users.sourceforge.jp>
+#
+
+cflags-$(CONFIG_CPU_H8300H) := -mh
+aflags-$(CONFIG_CPU_H8300H) := -mh -Wa,--mach=h8300h
+ldflags-$(CONFIG_CPU_H8300H) := -mh8300helf_linux
+cflags-$(CONFIG_CPU_H8S) := -ms
+aflags-$(CONFIG_CPU_H8S) := -ms -Wa,--mach=h8300s
+ldflags-$(CONFIG_CPU_H8S) := -mh8300self_linux
+
+KBUILD_CFLAGS += $(cflags-y)
+KBUILD_CFLAGS += -mint32 -fno-builtin
+KBUILD_CFLAGS += -D__linux__
+KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
+KBUILD_AFLAGS += $(aflags-y)
+LDFLAGS += $(ldflags-y)
+
+CROSS_COMPILE := h8300-unknown-linux-
+
+core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
+
+libs-y += arch/$(ARCH)/lib/
+
+boot := arch/h8300/boot
+
+archmrproper:
+
+archclean:
+ $(Q)$(MAKE) $(clean)=$(boot)
+
+vmlinux.srec vmlinux.bin zImage uImage.bin: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+define archhelp
+ @echo 'vmlinux.bin - Create raw binary'
+ @echo 'vmlinux.srec - Create srec binary'
+ @echo 'zImage - Compressed kernel image'
+endef
diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile
new file mode 100644
index 0000000..0b5fe00
--- /dev/null
+++ b/arch/h8300/kernel/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for the linux kernel.
+#
+
+extra-y := vmlinux.lds
+
+obj-y := process.o traps.o ptrace.o \
+ signal.o setup.o syscalls.o \
+ irq.o entry.o dma.o cpu/
+
+obj-$(CONFIG_ROMKERNEL) += head_rom.o
+obj-$(CONFIG_RAMKERNEL) += head_ram.o
+
+obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o
+obj-$(CONFIG_H8300H_SIM) += sim-console.o
+obj-$(CONFIG_H8S_SIM) += sim-console.o
diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..c92c096
--- /dev/null
+++ b/arch/h8300/kernel/vmlinux.lds.S
@@ -0,0 +1,67 @@
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+
+#define ROMTOP 0x000000
+#define RAMTOP CONFIG_RAMBASE
+
+jiffies = jiffies_64 + 4;
+
+ENTRY(_start)
+
+SECTIONS
+{
+#if defined(CONFIG_ROMKERNEL)
+ . = ROMTOP;
+ .vectors :
+ {
+ _vector = . ;
+ *(.vector*)
+ }
+#else
+ . = RAMTOP;
+ _ramstart = .;
+ . = . + CONFIG_OFFSET;
+#endif
+ _text = .;
+ HEAD_TEXT_SECTION
+ .text : {
+ _stext = . ;
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+#if defined(CONFIG_ROMKERNEL)
+ *(.int_redirect)
+#endif
+ _etext = . ;
+ }
+ EXCEPTION_TABLE(16)
+ NOTES
+ RO_DATA_SECTION(4)
+ ROMEND = .;
+#if defined(CONFIG_ROMKERNEL)
+ . = RAMTOP;
+ _ramstart = .;
+#define ADDR(x) ROMEND
+#else
+#endif
+ _sdata = . ;
+ __data_start = . ;
+ RW_DATA_SECTION(0,0,0)
+#if defined(CONFIG_ROMKERNEL)
+#undef ADDR
+#endif
+ . = ALIGN(0x4) ;
+ __init_begin = .;
+ INIT_TEXT_SECTION(4)
+ INIT_DATA_SECTION(4)
+ SECURITY_INIT
+ __init_end = .;
+ _edata = . ;
+ _begin_data = LOADADDR(.data);
+ _sbss =.;
+ BSS_SECTION(0, 0 ,0)
+ _ebss =.;
+ _ramend = .;
+ _end = .;
+ DISCARDS
+}
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 11/17] h8300: clock driver
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (9 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 10/17] h8300: Build scripts Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 12/17] h8300: clocksource Yoshinori Sato
` (5 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
h8300 clock generator drivers.
H8/3069 is simple oscillator.
H8S2678 is PLL multiplier support.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
drivers/clk/Makefile | 1 +
drivers/clk/h8300/Makefile | 2 +
drivers/clk/h8300/clk-h83069.c | 80 +++++++++++++++++++
drivers/clk/h8300/clk-h8s2678.c | 171 ++++++++++++++++++++++++++++++++++++++++
include/linux/clk-provider.h | 12 +++
5 files changed, 266 insertions(+)
create mode 100644 drivers/clk/h8300/Makefile
create mode 100644 drivers/clk/h8300/clk-h83069.c
create mode 100644 drivers/clk/h8300/clk-h8s2678.c
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d478ceb..593b09c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -70,3 +70,4 @@ obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
obj-$(CONFIG_X86) += x86/
obj-$(CONFIG_ARCH_ZYNQ) += zynq/
+obj-$(CONFIG_H8300) += h8300/
diff --git a/drivers/clk/h8300/Makefile b/drivers/clk/h8300/Makefile
new file mode 100644
index 0000000..82eab42
--- /dev/null
+++ b/drivers/clk/h8300/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_H83069) += clk-h83069.o
+obj-$(CONFIG_H8S2678) += clk-h8s2678.o
diff --git a/drivers/clk/h8300/clk-h83069.c b/drivers/clk/h8300/clk-h83069.c
new file mode 100644
index 0000000..0a20dd5
--- /dev/null
+++ b/drivers/clk/h8300/clk-h83069.c
@@ -0,0 +1,80 @@
+/*
+ * H8/3069 clock driver
+ *
+ * Copyright 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+static DEFINE_SPINLOCK(clklock);
+
+#define DIVCR ((unsigned char *)0xfee01b)
+#define DEVNAME "h83069-cpg"
+
+static int clk_probe(struct platform_device *pdev)
+{
+ struct clk *clk;
+ int *hz = dev_get_platdata(&pdev->dev);
+
+ clk = clk_register_fixed_rate(&pdev->dev, "master_clk", NULL,
+ CLK_IS_ROOT, *hz);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to register clock");
+ return PTR_ERR(clk);
+ }
+ clk_register_clkdev(clk, "master_clk", DEVNAME ".%d", 0);
+
+ clk = clk_register_divider(&pdev->dev, "core_clk", "master_clk",
+ CLK_SET_RATE_GATE, DIVCR, 0, 2,
+ CLK_DIVIDER_POWER_OF_TWO, &clklock);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to register clock");
+ return PTR_ERR(clk);
+ }
+ clk_register_clkdev(clk, "core_clk", DEVNAME ".%d", 0);
+
+ clk = clk_register_fixed_factor(&pdev->dev, "peripheral_clk", "core_clk",
+ 0, 1, 1);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to register clock");
+ return PTR_ERR(clk);
+ }
+ clk_register_clkdev(clk, "peripheral_clk", NULL);
+ return 0;
+}
+
+static struct platform_driver cpg_driver = {
+ .driver = {
+ .name = DEVNAME,
+ },
+ .probe = clk_probe,
+};
+
+early_platform_init(DEVNAME, &cpg_driver);
+
+static struct platform_device clk_device = {
+ .name = DEVNAME,
+ .id = 0,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &clk_device,
+};
+
+int __init h8300_clk_init(int hz)
+{
+ static int master_hz;
+
+ master_hz = hz;
+ clk_device.dev.platform_data = &master_hz;
+ early_platform_add_devices(devices,
+ ARRAY_SIZE(devices));
+ early_platform_driver_register_all(DEVNAME);
+ early_platform_driver_probe(DEVNAME, 1, 0);
+ return 0;
+}
diff --git a/drivers/clk/h8300/clk-h8s2678.c b/drivers/clk/h8300/clk-h8s2678.c
new file mode 100644
index 0000000..55b490c
--- /dev/null
+++ b/drivers/clk/h8300/clk-h8s2678.c
@@ -0,0 +1,171 @@
+/*
+ * H8S2678 clock driver
+ *
+ * Copyright 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+static DEFINE_SPINLOCK(clklock);
+
+#define SCKCR 0xffff3b
+#define PLLCR 0xffff45
+#define DEVNAME "h8s2678-cpg"
+#define MAX_FREQ 33333333
+#define MIN_FREQ 8000000
+
+static unsigned long pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ int mul = 1 << (ctrl_inb(PLLCR) & 3);
+
+ return parent_rate * mul;
+}
+
+static long pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ int i, m = -1;
+ long offset[3];
+
+ if (rate > MAX_FREQ)
+ rate = MAX_FREQ;
+ if (rate < MIN_FREQ)
+ rate = MIN_FREQ;
+
+ for (i = 0; i < 3; i++)
+ offset[i] = abs(rate - (*prate * (1 << i)));
+ for (i = 0; i < 3; i++)
+ if (m < 0)
+ m = i;
+ else
+ m = (offset[i] < offset[m])?i:m;
+
+ return *prate * (1 << m);
+}
+
+static int pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ int pll;
+ unsigned char val;
+ unsigned long flags;
+
+ pll = ((rate / parent_rate) / 2) & 0x03;
+ spin_lock_irqsave(&clklock, flags);
+ val = ctrl_inb(SCKCR);
+ val |= 0x08;
+ ctrl_outb(val, SCKCR);
+ val = ctrl_inb(PLLCR);
+ val &= ~0x03;
+ val |= pll;
+ ctrl_outb(val, PLLCR);
+ spin_unlock_irqrestore(&clklock, flags);
+ return 0;
+}
+
+static const struct clk_ops pll_ops = {
+ .recalc_rate = pll_recalc_rate,
+ .round_rate = pll_round_rate,
+ .set_rate = pll_set_rate,
+};
+
+static struct clk *pll_clk_register(struct device *dev, const char *name,
+ const char *parent)
+{
+ struct clk_hw *hw;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ hw = kzalloc(sizeof(struct clk_hw), GFP_KERNEL);
+ if (!hw)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &pll_ops;
+ init.flags = CLK_IS_BASIC;
+ init.parent_names = &parent;
+ init.num_parents = 1;
+ hw->init = &init;
+
+ clk = clk_register(dev, hw);
+ if (IS_ERR(clk))
+ kfree(hw);
+
+ return clk;
+}
+
+static int clk_probe(struct platform_device *pdev)
+{
+ struct clk *clk;
+ int *hz = dev_get_platdata(&pdev->dev);
+
+ clk = clk_register_fixed_rate(&pdev->dev, "master_clk", NULL,
+ CLK_IS_ROOT, *hz);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to register clock");
+ return PTR_ERR(clk);
+ }
+ clk_register_clkdev(clk, "master_clk", DEVNAME ".%d", 0);
+
+ clk = pll_clk_register(&pdev->dev, "pll_clk", "master_clk");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to register clock");
+ return PTR_ERR(clk);
+ }
+ clk_register_clkdev(clk, "pll_clk", DEVNAME ".%d", 0);
+
+ clk = clk_register_divider(&pdev->dev, "core_clk", "pll_clk",
+ CLK_SET_RATE_GATE, (unsigned char *)SCKCR,
+ 0, 3, CLK_DIVIDER_POWER_OF_TWO, &clklock);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to register clock");
+ return PTR_ERR(clk);
+ }
+ clk_register_clkdev(clk, "core_clk", DEVNAME ".%d", 0);
+
+ clk = clk_register_fixed_factor(&pdev->dev, "peripheral_clk", "core_clk",
+ 0, 1, 1);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to register clock");
+ return PTR_ERR(clk);
+ }
+ clk_register_clkdev(clk, "peripheral_clk", NULL);
+ return 0;
+}
+
+static struct platform_driver cpg_driver = {
+ .driver = {
+ .name = DEVNAME,
+ },
+ .probe = clk_probe,
+};
+
+early_platform_init(DEVNAME, &cpg_driver);
+
+static struct platform_device clk_device = {
+ .name = DEVNAME,
+ .id = 0,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &clk_device,
+};
+
+int __init h8300_clk_init(int hz)
+{
+ static int master_hz;
+
+ master_hz = hz;
+ clk_device.dev.platform_data = &master_hz;
+ early_platform_add_devices(devices,
+ ARRAY_SIZE(devices));
+ early_platform_driver_register_all(DEVNAME);
+ early_platform_driver_probe(DEVNAME, 1, 0);
+ return 0;
+}
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 5591ea7..6059414 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -675,6 +675,18 @@ static inline void clk_writel(u32 val, u32 __iomem *reg)
iowrite32be(val, reg);
}
+#elif IS_ENABLED(CONFIG_H8300)
+
+static inline u32 clk_readl(u32 __iomem *reg)
+{
+ return __raw_readb(reg);
+}
+
+static inline void clk_writel(u32 val, u32 __iomem *reg)
+{
+ __raw_writeb(val, reg);
+}
+
#else /* platform dependent I/O accessors */
static inline u32 clk_readl(u32 __iomem *reg)
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 12/17] h8300: clocksource
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (10 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 11/17] h8300: clock driver Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 13/17] h8300: configs Yoshinori Sato
` (4 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
H8/300 internal timer driver.
h8300_timer8 - 8bit Timer driver.
h8300_timer16 - 16bit Timer driver (only H8/3069).
h8300_tpu - Timer Pulse Unit driver (only H8S2678).
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
drivers/clocksource/Kconfig | 6 +
drivers/clocksource/Makefile | 3 +
drivers/clocksource/h8300_timer16.c | 332 ++++++++++++++++++++++++++++++
drivers/clocksource/h8300_timer8.c | 398 ++++++++++++++++++++++++++++++++++++
drivers/clocksource/h8300_tpu.c | 203 ++++++++++++++++++
5 files changed, 942 insertions(+)
create mode 100644 drivers/clocksource/h8300_timer16.c
create mode 100644 drivers/clocksource/h8300_timer8.c
create mode 100644 drivers/clocksource/h8300_tpu.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index a0b036c..fef959a 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -253,4 +253,10 @@ config CLKSRC_PXA
help
This enables OST0 support available on PXA and SA-11x0
platforms.
+config H8300_TMR16
+ bool
+
+config H8300_TPU
+ bool
+
endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 752d5c7..99b45f7 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -51,3 +51,6 @@ obj-$(CONFIG_ARCH_INTEGRATOR_AP) += timer-integrator-ap.o
obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o
obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o
obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o
+obj-$(CONFIG_H8300) += h8300_timer8.o
+obj-$(CONFIG_H8300_TMR16) += h8300_timer16.o
+obj-$(CONFIG_H8300_TPU) += h8300_tpu.o
diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
new file mode 100644
index 0000000..bf6a74c
--- /dev/null
+++ b/drivers/clocksource/h8300_timer16.c
@@ -0,0 +1,332 @@
+/*
+ * linux/arch/h8300/kernel/timer/timer16.c
+ *
+ * Yoshinori Sato <ysato@users.sourcefoge.jp>
+ *
+ * 16bit Timer clockevent device
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clockchips.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/segment.h>
+#include <asm/irq.h>
+#include <asm/timer.h>
+
+#define TSTR 0
+#define TSNC 1
+#define TMDR 2
+#define TOLR 3
+#define TISRA 4
+#define TISRB 5
+#define TISRC 6
+
+#define TCR 0
+#define TIOR 1
+#define TCNT 2
+#define GRA 4
+#define GRB 6
+
+#define FLAG_REPROGRAM (1 << 0)
+#define FLAG_SKIPEVENT (1 << 1)
+#define FLAG_IRQCONTEXT (1 << 2)
+#define FLAG_STARTED (1 << 3)
+
+#define ONESHOT 0
+#define PERIODIC 1
+
+#define RELATIVE 0
+#define ABSOLUTE 1
+
+struct timer16_priv {
+ struct platform_device *pdev;
+ struct clock_event_device ced;
+ struct irqaction irqaction;
+ unsigned long mapbase;
+ unsigned long mapcommon;
+ unsigned long flags;
+ unsigned int rate;
+ unsigned short gra;
+ unsigned char enb;
+ unsigned char imfa;
+ unsigned char imiea;
+ unsigned char ovf;
+ raw_spinlock_t lock;
+ struct clk *clk;
+};
+
+static unsigned long timer16_get_counter(struct timer16_priv *p)
+{
+ unsigned long v1, v2, v3;
+ int o1, o2;
+
+ o1 = ctrl_inb(p->mapcommon + TISRC) & p->ovf;
+
+ /* Make sure the timer value is stable. Stolen from acpi_pm.c */
+ do {
+ o2 = o1;
+ v1 = ctrl_inw(p->mapbase + TCNT);
+ v2 = ctrl_inw(p->mapbase + TCNT);
+ v3 = ctrl_inw(p->mapbase + TCNT);
+ o1 = ctrl_inb(p->mapcommon + TISRC) & p->ovf;
+ } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
+ || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
+
+ v2 |= 0x10000;
+ return v2;
+}
+
+
+static irqreturn_t timer16_interrupt(int irq, void *dev_id)
+{
+ struct timer16_priv *p = (struct timer16_priv *)dev_id;
+
+ ctrl_outb(ctrl_inb(p->mapcommon + TISRA) & ~p->imfa,
+ p->mapcommon + TISRA);
+
+ p->flags |= FLAG_IRQCONTEXT;
+ ctrl_outw(p->gra, p->mapbase + GRA);
+ if (!(p->flags & FLAG_SKIPEVENT)) {
+ if (p->ced.mode == CLOCK_EVT_MODE_ONESHOT) {
+ ctrl_outb(ctrl_inb(p->mapcommon + TSTR) & ~p->enb,
+ p->mapcommon + TISRA);
+ }
+ p->ced.event_handler(&p->ced);
+ }
+
+ p->flags &= ~(FLAG_SKIPEVENT | FLAG_IRQCONTEXT);
+
+ return IRQ_HANDLED;
+}
+
+static void timer16_set_next(struct timer16_priv *p, unsigned long delta)
+{
+ unsigned long flags;
+ unsigned long now;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+ if (delta >= 0x10000)
+ dev_warn(&p->pdev->dev, "delta out of range\n");
+ now = timer16_get_counter(p);
+ p->gra = delta;
+ ctrl_outb(ctrl_inb(p->mapcommon + TISRA) | p->imiea,
+ p->mapcommon + TISRA);
+ if (delta > now)
+ ctrl_outw(delta, p->mapbase + GRA);
+ else
+ ctrl_outw(now + 1, p->mapbase + GRA);
+
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static int timer16_enable(struct timer16_priv *p)
+{
+ p->rate = clk_get_rate(p->clk) / 8;
+ ctrl_outw(0xffff, p->mapbase + GRA);
+ ctrl_outw(0x0000, p->mapbase + TCNT);
+ ctrl_outb(0xa3, p->mapbase + TCR);
+ ctrl_outb(ctrl_inb(p->mapcommon + TSTR) | p->enb,
+ p->mapcommon + TSTR);
+
+ return 0;
+}
+
+static int timer16_start(struct timer16_priv *p)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+
+ if (!(p->flags & FLAG_STARTED))
+ ret = timer16_enable(p);
+
+ if (ret)
+ goto out;
+ p->flags |= FLAG_STARTED;
+
+ out:
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+
+ return ret;
+}
+
+static void timer16_stop(struct timer16_priv *p)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+
+ ctrl_outb(ctrl_inb(p->mapcommon + TSTR) & ~p->enb,
+ p->mapcommon + TSTR);
+
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static inline struct timer16_priv *ced_to_priv(struct clock_event_device *ced)
+{
+ return container_of(ced, struct timer16_priv, ced);
+}
+
+static void timer16_clock_event_start(struct timer16_priv *p, int periodic)
+{
+ struct clock_event_device *ced = &p->ced;
+
+ timer16_start(p);
+
+ ced->shift = 32;
+ ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
+ ced->max_delta_ns = clockevent_delta2ns(0xffff, ced);
+ ced->min_delta_ns = clockevent_delta2ns(0x0001, ced);
+
+ timer16_set_next(p, periodic?(p->rate + HZ/2) / HZ:0x10000);
+}
+
+static void timer16_clock_event_mode(enum clock_event_mode mode,
+ struct clock_event_device *ced)
+{
+ struct timer16_priv *p = ced_to_priv(ced);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ dev_info(&p->pdev->dev, "used for periodic clock events\n");
+ timer16_stop(p);
+ timer16_clock_event_start(p, PERIODIC);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+ timer16_stop(p);
+ timer16_clock_event_start(p, ONESHOT);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ timer16_stop(p);
+ break;
+ default:
+ break;
+ }
+}
+
+static int timer16_clock_event_next(unsigned long delta,
+ struct clock_event_device *ced)
+{
+ struct timer16_priv *p = ced_to_priv(ced);
+
+ BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT);
+ timer16_set_next(p, delta - 1);
+
+ return 0;
+}
+
+#define REG_CH 0
+#define REG_COMM 1
+
+static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
+{
+ struct h8300_timer16_config *cfg = dev_get_platdata(&pdev->dev);
+ struct resource *res[2];
+ int ret, irq;
+
+ memset(p, 0, sizeof(*p));
+ p->pdev = pdev;
+
+ res[REG_CH] = platform_get_resource(p->pdev,
+ IORESOURCE_MEM, REG_CH);
+ res[REG_COMM] = platform_get_resource(p->pdev,
+ IORESOURCE_MEM, REG_COMM);
+ if (!res[REG_CH] || !res[REG_COMM]) {
+ dev_err(&p->pdev->dev, "failed to get I/O memory\n");
+ return -ENXIO;
+ }
+ irq = platform_get_irq(p->pdev, 0);
+ if (irq < 0) {
+ dev_err(&p->pdev->dev, "failed to get irq\n");
+ return irq;
+ }
+
+ p->clk = clk_get(&p->pdev->dev, "peripheral_clk");
+ if (IS_ERR(p->clk)) {
+ dev_err(&p->pdev->dev, "can't get clk\n");
+ return PTR_ERR(p->clk);
+ }
+
+ p->pdev = pdev;
+ p->mapbase = res[REG_CH]->start;
+ p->mapcommon = res[REG_COMM]->start;
+ p->enb = 1 << cfg->enb;
+ p->imfa = 1 << cfg->imfa;
+ p->imiea = 1 << cfg->imiea;
+ p->ced.name = pdev->name;
+ p->ced.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ p->ced.rating = 200;
+ p->ced.cpumask = cpumask_of(0);
+ p->ced.set_next_event = timer16_clock_event_next;
+ p->ced.set_mode = timer16_clock_event_mode;
+
+ ret = request_irq(irq, timer16_interrupt,
+ IRQF_DISABLED | IRQF_TIMER, pdev->name, p);
+ if (ret < 0) {
+ dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
+ return ret;
+ }
+
+ clockevents_register_device(&p->ced);
+
+ return 0;
+}
+
+static int timer16_probe(struct platform_device *pdev)
+{
+ struct timer16_priv *p = platform_get_drvdata(pdev);
+
+ if (p) {
+ dev_info(&pdev->dev, "kept as earlytimer\n");
+ return 0;
+ }
+
+ p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+
+ return timer16_setup(p, pdev);
+}
+
+static int timer16_remove(struct platform_device *pdev)
+{
+ return -EBUSY;
+}
+
+static struct platform_driver timer16_driver = {
+ .probe = timer16_probe,
+ .remove = timer16_remove,
+ .driver = {
+ .name = "h8300h-16timer",
+ }
+};
+
+static int __init timer16_init(void)
+{
+ return platform_driver_register(&timer16_driver);
+}
+
+static void __exit timer16_exit(void)
+{
+ platform_driver_unregister(&timer16_driver);
+}
+
+subsys_initcall(timer16_init);
+module_exit(timer16_exit);
+MODULE_AUTHOR("Yoshinori Sato");
+MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
new file mode 100644
index 0000000..3d84b6c
--- /dev/null
+++ b/drivers/clocksource/h8300_timer8.c
@@ -0,0 +1,398 @@
+/*
+ * linux/arch/h8300/kernel/cpu/timer/timer8.c
+ *
+ * Yoshinori Sato <ysato@users.sourcefoge.jp>
+ *
+ * 8bit Timer driver
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/timer.h>
+
+#define _8TCR 0
+#define _8TCSR 2
+#define TCORA 4
+#define TCORB 6
+#define _8TCNT 8
+
+#define FLAG_REPROGRAM (1 << 0)
+#define FLAG_SKIPEVENT (1 << 1)
+#define FLAG_IRQCONTEXT (1 << 2)
+#define FLAG_STARTED (1 << 3)
+
+#define ONESHOT 0
+#define PERIODIC 1
+
+#define RELATIVE 0
+#define ABSOLUTE 1
+
+struct timer8_priv {
+ struct platform_device *pdev;
+ int mode;
+ union {
+ struct clocksource cs;
+ struct clock_event_device ced;
+ } clk;
+ struct irqaction irqaction;
+ unsigned long mapbase;
+ raw_spinlock_t lock;
+ unsigned long total_cycles;
+ unsigned int cs_enabled;
+ unsigned long flags;
+ unsigned int rate;
+ unsigned short tcora;
+ unsigned short div;
+ struct clk *pclk;
+};
+
+static const int div_rate[] = {8, 64, 8192};
+
+static unsigned long timer8_get_counter(struct timer8_priv *p)
+{
+ unsigned long v1, v2, v3;
+ int o1, o2;
+
+ o1 = ctrl_inb(p->mapbase + _8TCSR) & 0x20;
+
+ /* Make sure the timer value is stable. Stolen from acpi_pm.c */
+ do {
+ o2 = o1;
+ v1 = ctrl_inw(p->mapbase + _8TCNT);
+ v2 = ctrl_inw(p->mapbase + _8TCNT);
+ v3 = ctrl_inw(p->mapbase + _8TCNT);
+ o1 = ctrl_inb(p->mapbase + _8TCSR) & 0x20;
+ } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
+ || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
+
+ v2 |= o1 << 10;
+ return v2;
+}
+
+static irqreturn_t timer8_interrupt(int irq, void *dev_id)
+{
+ struct timer8_priv *p = dev_id;
+
+ switch (p->mode) {
+ case H8300_TMR8_CLKSRC:
+ ctrl_outb(ctrl_inb(p->mapbase + _8TCSR) & ~0x20,
+ p->mapbase + _8TCSR);
+ p->total_cycles += 0x10000;
+ break;
+ case H8300_TMR8_CLKEVTDEV:
+ ctrl_outb(ctrl_inb(p->mapbase + _8TCSR) & ~0x40,
+ p->mapbase + _8TCSR);
+ p->flags |= FLAG_IRQCONTEXT;
+ ctrl_outw(p->tcora, p->mapbase + TCORA);
+ if (!(p->flags & FLAG_SKIPEVENT)) {
+ if (p->clk.ced.mode == CLOCK_EVT_MODE_ONESHOT)
+ ctrl_outw(0x0000, p->mapbase + _8TCR);
+ p->clk.ced.event_handler(&p->clk.ced);
+ }
+ p->flags &= ~(FLAG_SKIPEVENT | FLAG_IRQCONTEXT);
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static inline struct timer8_priv *cs_to_priv(struct clocksource *cs)
+{
+ return container_of(cs, struct timer8_priv, clk.cs);
+}
+
+static cycle_t timer8_clocksource_read(struct clocksource *cs)
+{
+ struct timer8_priv *p = cs_to_priv(cs);
+ unsigned long flags, raw;
+ unsigned long value;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+ value = p->total_cycles;
+ raw = timer8_get_counter(p);
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+
+ return value + raw;
+}
+
+static int timer8_clocksource_enable(struct clocksource *cs)
+{
+ struct timer8_priv *p = cs_to_priv(cs);
+
+ WARN_ON(p->cs_enabled);
+
+ p->total_cycles = 0;
+ ctrl_outw(0, p->mapbase + _8TCNT);
+ ctrl_outw(0x2400 | p->div, p->mapbase + _8TCR);
+
+ p->cs_enabled = true;
+ return 0;
+}
+
+static void timer8_clocksource_disable(struct clocksource *cs)
+{
+ struct timer8_priv *p = cs_to_priv(cs);
+
+ WARN_ON(!p->cs_enabled);
+
+ ctrl_outb(0, p->mapbase + _8TCR);
+ p->cs_enabled = false;
+}
+
+static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
+{
+ unsigned long flags;
+ unsigned long now;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+ if (delta >= 0x10000)
+ dev_warn(&p->pdev->dev, "delta out of range\n");
+ now = timer8_get_counter(p);
+ p->tcora = delta;
+ ctrl_outb(ctrl_inb(p->mapbase + _8TCR) | 0x40, p->mapbase + _8TCR);
+ if (delta > now)
+ ctrl_outw(delta, p->mapbase + TCORA);
+ else
+ ctrl_outw(now + 1, p->mapbase + TCORA);
+
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static int timer8_enable(struct timer8_priv *p)
+{
+ p->rate = clk_get_rate(p->pclk) / div_rate[p->div];
+ ctrl_outw(0xffff, p->mapbase + TCORA);
+ ctrl_outw(0x0000, p->mapbase + _8TCNT);
+ ctrl_outw(0x0c01, p->mapbase + _8TCR);
+
+ return 0;
+}
+
+static int timer8_start(struct timer8_priv *p)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+
+ if (!(p->flags & FLAG_STARTED))
+ ret = timer8_enable(p);
+
+ if (ret)
+ goto out;
+ p->flags |= FLAG_STARTED;
+
+ out:
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+
+ return ret;
+}
+
+static void timer8_stop(struct timer8_priv *p)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+
+ ctrl_outw(0x0000, p->mapbase + _8TCR);
+
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static inline struct timer8_priv *ced_to_priv(struct clock_event_device *ced)
+{
+ return container_of(ced, struct timer8_priv, clk.ced);
+}
+
+static void timer8_clock_event_start(struct timer8_priv *p, int periodic)
+{
+ struct clock_event_device *ced = &p->clk.ced;
+
+ timer8_start(p);
+
+ ced->shift = 32;
+ ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
+ ced->max_delta_ns = clockevent_delta2ns(0xffff, ced);
+ ced->min_delta_ns = clockevent_delta2ns(0x0001, ced);
+
+ timer8_set_next(p, periodic?(p->rate + HZ/2) / HZ:0x10000);
+}
+
+static void timer8_clock_event_mode(enum clock_event_mode mode,
+ struct clock_event_device *ced)
+{
+ struct timer8_priv *p = ced_to_priv(ced);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ dev_info(&p->pdev->dev, "used for periodic clock events\n");
+ timer8_stop(p);
+ timer8_clock_event_start(p, PERIODIC);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+ timer8_stop(p);
+ timer8_clock_event_start(p, ONESHOT);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ timer8_stop(p);
+ break;
+ default:
+ break;
+ }
+}
+
+static int timer8_clock_event_next(unsigned long delta,
+ struct clock_event_device *ced)
+{
+ struct timer8_priv *p = ced_to_priv(ced);
+
+ BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT);
+ timer8_set_next(p, delta - 1);
+
+ return 0;
+}
+
+#define CMI 0
+#define OVI 1
+static int __init timer8_setup(struct timer8_priv *p,
+ struct platform_device *pdev)
+{
+ struct h8300_timer8_config *cfg = dev_get_platdata(&pdev->dev);
+ struct resource *res;
+ int irq[2];
+ int ret;
+
+ memset(p, 0, sizeof(*p));
+ p->pdev = pdev;
+
+ res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&p->pdev->dev, "failed to get I/O memory\n");
+ return -ENXIO;
+ }
+
+ irq[CMI] = platform_get_irq(p->pdev, CMI);
+ irq[OVI] = platform_get_irq(p->pdev, OVI);
+ if (irq[CMI] < 0 || irq[OVI] < 0) {
+ dev_err(&p->pdev->dev, "failed to get irq\n");
+ return -ENXIO;
+ }
+
+ p->mapbase = res->start;
+
+ p->irqaction.name = dev_name(&p->pdev->dev);
+ p->irqaction.handler = timer8_interrupt;
+ p->irqaction.dev_id = p;
+ p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER;
+
+ p->mode = cfg->mode;
+ p->div = cfg->div;
+
+ p->pclk = clk_get(&p->pdev->dev, "peripheral_clk");
+ if (IS_ERR(p->pclk)) {
+ dev_err(&p->pdev->dev, "can't get clk\n");
+ return PTR_ERR(p->pclk);
+ }
+
+ switch (p->mode) {
+ case H8300_TMR8_CLKSRC:
+ p->clk.cs.name = pdev->name;
+ p->clk.cs.rating = 200;
+ p->clk.cs.read = timer8_clocksource_read;
+ p->clk.cs.enable = timer8_clocksource_enable;
+ p->clk.cs.disable = timer8_clocksource_disable;
+ p->clk.cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
+ p->clk.cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ ret = setup_irq(irq[OVI], &p->irqaction);
+ if (ret < 0) {
+ dev_err(&p->pdev->dev,
+ "failed to request irq %d\n", irq[OVI]);
+ return ret;
+ }
+ clocksource_register_hz(&p->clk.cs,
+ clk_get_rate(p->pclk) / div_rate[p->div]);
+ break;
+ case H8300_TMR8_CLKEVTDEV:
+ p->clk.ced.name = pdev->name;
+ p->clk.ced.features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT;
+ p->clk.ced.rating = 200;
+ p->clk.ced.cpumask = cpumask_of(0);
+ p->clk.ced.set_next_event = timer8_clock_event_next;
+ p->clk.ced.set_mode = timer8_clock_event_mode;
+
+ ret = setup_irq(irq[CMI], &p->irqaction);
+ if (ret < 0) {
+ dev_err(&p->pdev->dev,
+ "failed to request irq %d\n", irq[CMI]);
+ return ret;
+ }
+ clockevents_register_device(&p->clk.ced);
+ break;
+ }
+ platform_set_drvdata(pdev, p);
+
+ return 0;
+}
+
+static int timer8_probe(struct platform_device *pdev)
+{
+ struct timer8_priv *p = platform_get_drvdata(pdev);
+
+ if (p) {
+ dev_info(&pdev->dev, "kept as earlytimer\n");
+ return 0;
+ }
+
+ p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+
+ return timer8_setup(p, pdev);
+}
+
+static int timer8_remove(struct platform_device *pdev)
+{
+ return -EBUSY;
+}
+
+static struct platform_driver timer8_driver = {
+ .probe = timer8_probe,
+ .remove = timer8_remove,
+ .driver = {
+ .name = "h8300-8timer",
+ }
+};
+
+static int __init timer8_init(void)
+{
+ return platform_driver_register(&timer8_driver);
+}
+
+static void __exit timer8_exit(void)
+{
+ platform_driver_unregister(&timer8_driver);
+}
+
+early_platform_init("earlytimer", &timer8_driver);
+subsys_initcall(timer8_init);
+module_exit(timer8_exit);
+MODULE_AUTHOR("Yoshinori Sato");
+MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
new file mode 100644
index 0000000..1aae8a7
--- /dev/null
+++ b/drivers/clocksource/h8300_tpu.c
@@ -0,0 +1,203 @@
+/*
+ * linux/arch/h8300/kernel/cpu/timer/timer_tpu.c
+ *
+ * Yoshinori Sato <ysato@users.sourcefoge.jp>
+ *
+ * TPU driver
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clocksource.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/timer.h>
+
+#define TCR 0
+#define TMDR 1
+#define TIOR 2
+#define TER 4
+#define TSR 5
+#define TCNT 6
+#define TGRA 8
+#define TGRB 10
+#define TGRC 12
+#define TGRD 14
+
+struct tpu_priv {
+ struct platform_device *pdev;
+ struct clocksource cs;
+ struct clk *clk;
+ unsigned long mapbase1;
+ unsigned long mapbase2;
+ raw_spinlock_t lock;
+ unsigned int cs_enabled;
+};
+
+static inline unsigned long read_tcnt32(struct tpu_priv *p)
+{
+ unsigned long tcnt;
+
+ tcnt = ctrl_inw(p->mapbase1 + TCNT) << 16;
+ tcnt |= ctrl_inw(p->mapbase2 + TCNT);
+ return tcnt;
+}
+
+static int tpu_get_counter(struct tpu_priv *p, unsigned long long *val)
+{
+ unsigned long v1, v2, v3;
+ int o1, o2;
+
+ o1 = ctrl_inb(p->mapbase1 + TSR) & 0x10;
+
+ /* Make sure the timer value is stable. Stolen from acpi_pm.c */
+ do {
+ o2 = o1;
+ v1 = read_tcnt32(p);
+ v2 = read_tcnt32(p);
+ v3 = read_tcnt32(p);
+ o1 = ctrl_inb(p->mapbase1 + TSR) & 0x10;
+ } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
+ || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
+
+ *val = v2;
+ return o1;
+}
+
+static inline struct tpu_priv *cs_to_priv(struct clocksource *cs)
+{
+ return container_of(cs, struct tpu_priv, cs);
+}
+
+static cycle_t tpu_clocksource_read(struct clocksource *cs)
+{
+ struct tpu_priv *p = cs_to_priv(cs);
+ unsigned long flags;
+ unsigned long long value;
+
+ raw_spin_lock_irqsave(&p->lock, flags);
+ if (tpu_get_counter(p, &value))
+ value += 0x100000000;
+ raw_spin_unlock_irqrestore(&p->lock, flags);
+
+ return value;
+}
+
+static int tpu_clocksource_enable(struct clocksource *cs)
+{
+ struct tpu_priv *p = cs_to_priv(cs);
+
+ WARN_ON(p->cs_enabled);
+
+ ctrl_outw(0, p->mapbase1 + TCNT);
+ ctrl_outw(0, p->mapbase2 + TCNT);
+ ctrl_outb(0x0f, p->mapbase1 + TCR);
+ ctrl_outb(0x03, p->mapbase2 + TCR);
+
+ p->cs_enabled = true;
+ return 0;
+}
+
+static void tpu_clocksource_disable(struct clocksource *cs)
+{
+ struct tpu_priv *p = cs_to_priv(cs);
+
+ WARN_ON(!p->cs_enabled);
+
+ ctrl_outb(0, p->mapbase1 + TCR);
+ ctrl_outb(0, p->mapbase2 + TCR);
+ p->cs_enabled = false;
+}
+
+#define CH_L 0
+#define CH_H 1
+
+static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
+{
+ struct resource *res[2];
+
+ memset(p, 0, sizeof(*p));
+ p->pdev = pdev;
+
+ res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
+ res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
+ if (!res[CH_L] || !res[CH_H]) {
+ dev_err(&p->pdev->dev, "failed to get I/O memory\n");
+ return -ENXIO;
+ }
+
+ p->clk = clk_get(&p->pdev->dev, "peripheral_clk");
+ if (IS_ERR(p->clk)) {
+ dev_err(&p->pdev->dev, "can't get clk\n");
+ return PTR_ERR(p->clk);
+ }
+
+ p->mapbase1 = res[CH_L]->start;
+ p->mapbase2 = res[CH_H]->start;
+
+ p->cs.name = pdev->name;
+ p->cs.rating = 200;
+ p->cs.read = tpu_clocksource_read;
+ p->cs.enable = tpu_clocksource_enable;
+ p->cs.disable = tpu_clocksource_disable;
+ p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
+ p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
+ platform_set_drvdata(pdev, p);
+
+ return 0;
+}
+
+static int tpu_probe(struct platform_device *pdev)
+{
+ struct tpu_priv *p = platform_get_drvdata(pdev);
+
+ if (p) {
+ dev_info(&pdev->dev, "kept as earlytimer\n");
+ return 0;
+ }
+
+ p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+
+ return tpu_setup(p, pdev);
+}
+
+static int tpu_remove(struct platform_device *pdev)
+{
+ return -EBUSY;
+}
+
+static struct platform_driver tpu_driver = {
+ .probe = tpu_probe,
+ .remove = tpu_remove,
+ .driver = {
+ .name = "h8s-tpu",
+ }
+};
+
+static int __init tpu_init(void)
+{
+ return platform_driver_register(&tpu_driver);
+}
+
+static void __exit tpu_exit(void)
+{
+ platform_driver_unregister(&tpu_driver);
+}
+
+subsys_initcall(tpu_init);
+module_exit(tpu_exit);
+MODULE_AUTHOR("Yoshinori Sato");
+MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
+MODULE_LICENSE("GPL v2");
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 13/17] h8300: configs
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (11 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 12/17] h8300: clocksource Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 14/17] serial: Add H8300 Yoshinori Sato
` (3 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
h8300h-sim_defconfig: H8/300H simulator config.
h8s-sim_defconfig: H8S simulator config.
edosk2674_defconfig: EDOSK2674R evalution board config.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/h8300/configs/h8300h-sim_defconfig | 53 +++++++++++++++++++++++++++++++++
arch/h8300/configs/h8s-sim_defconfig | 53 +++++++++++++++++++++++++++++++++
2 files changed, 106 insertions(+)
create mode 100644 arch/h8300/configs/h8300h-sim_defconfig
create mode 100644 arch/h8300/configs/h8s-sim_defconfig
diff --git a/arch/h8300/configs/h8300h-sim_defconfig b/arch/h8300/configs/h8300h-sim_defconfig
new file mode 100644
index 0000000..bad1a1e
--- /dev/null
+++ b/arch/h8300/configs/h8300h-sim_defconfig
@@ -0,0 +1,53 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_USELIB is not set
+# CONFIG_INIT_FALLBACK is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSFS_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_ADVISE_SYSCALLS is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_BLOCK is not set
+CONFIG_H8300H_SIM=y
+CONFIG_CPU_CLOCK=20000000
+CONFIG_RAMSIZE=0x200000
+# CONFIG_BINFMT_SCRIPT is not set
+CONFIG_BINFMT_FLAT=y
+# CONFIG_COREDUMP is not set
+# CONFIG_UEVENT_HELPER is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_CRC32 is not set
diff --git a/arch/h8300/configs/h8s-sim_defconfig b/arch/h8300/configs/h8s-sim_defconfig
new file mode 100644
index 0000000..025cdd8
--- /dev/null
+++ b/arch/h8300/configs/h8s-sim_defconfig
@@ -0,0 +1,53 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_USELIB is not set
+# CONFIG_INIT_FALLBACK is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSFS_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_ADVISE_SYSCALLS is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_BLOCK is not set
+CONFIG_H8S_SIM=y
+CONFIG_CPU_CLOCK=33333333
+CONFIG_RAMSIZE=0x200000
+# CONFIG_BINFMT_SCRIPT is not set
+CONFIG_BINFMT_FLAT=y
+# CONFIG_COREDUMP is not set
+# CONFIG_UEVENT_HELPER is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_CRC32 is not set
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 14/17] serial: Add H8300.
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (12 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 13/17] h8300: configs Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 15/17] Add ELF machine Yoshinori Sato
` (2 subsequent siblings)
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
h8300 internal serial controller of same as sh-sci.
So h8300 use SH_SCI.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
drivers/tty/serial/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index d2501f0..77d77d4 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -738,7 +738,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+ depends on SUPERH || ARCH_SHMOBILE || H8300 || COMPILE_TEST
select SERIAL_CORE
config SERIAL_SH_SCI_NR_UARTS
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 15/17] Add ELF machine
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (13 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 14/17] serial: Add H8300 Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 16/17] mksysmap: Add h8300 local symbol pattern Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 17/17] Add H8/300 entry Yoshinori Sato
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
include/uapi/linux/elf-em.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/uapi/linux/elf-em.h b/include/uapi/linux/elf-em.h
index ae99f77..b088296 100644
--- a/include/uapi/linux/elf-em.h
+++ b/include/uapi/linux/elf-em.h
@@ -25,6 +25,7 @@
#define EM_ARM 40 /* ARM 32 bit */
#define EM_SH 42 /* SuperH */
#define EM_SPARCV9 43 /* SPARC v9 64-bit */
+#define EM_H8_300 46 /* Renesas H8/300 */
#define EM_IA_64 50 /* HP/Intel IA-64 */
#define EM_X86_64 62 /* AMD x86-64 */
#define EM_S390 22 /* IBM S/390 */
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 16/17] mksysmap: Add h8300 local symbol pattern
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (14 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 15/17] Add ELF machine Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
2015-04-20 6:13 ` [PATCH v8 17/17] Add H8/300 entry Yoshinori Sato
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
h8300's nm output have a lot of local symbols.
ex)
00000000 N .Lframe0
00000013 N .LLST1
00000026 N .LLST2
00000039 N .LLST3
0000004c N .LLST4
Added new pattern " .L" to filter rule.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
scripts/mksysmap | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/mksysmap b/scripts/mksysmap
index 7ada35a..a35acc0 100755
--- a/scripts/mksysmap
+++ b/scripts/mksysmap
@@ -41,4 +41,4 @@
# so we just ignore them to let readprofile continue to work.
# (At least sparc64 has __crc_ in the middle).
-$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $2
+$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( .L\)' > $2
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v8 17/17] Add H8/300 entry
2015-04-20 6:13 [PATCH v8 00/17] Re-introduce h8300 architecture Yoshinori Sato
` (15 preceding siblings ...)
2015-04-20 6:13 ` [PATCH v8 16/17] mksysmap: Add h8300 local symbol pattern Yoshinori Sato
@ 2015-04-20 6:13 ` Yoshinori Sato
16 siblings, 0 replies; 26+ messages in thread
From: Yoshinori Sato @ 2015-04-20 6:13 UTC (permalink / raw)
To: linux-kernel, linux-arch; +Cc: Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
CREDITS | 5 -----
MAINTAINERS | 11 +++++++++++
2 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/CREDITS b/CREDITS
index 96935df..3bea091 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3194,11 +3194,6 @@ N: Dipankar Sarma
E: dipankar@in.ibm.com
D: RCU
-N: Yoshinori Sato
-E: ysato@users.sourceforge.jp
-D: uClinux for Renesas H8/300 (H8300)
-D: http://uclinux-h8.sourceforge.jp/
-
N: Hannu Savolainen
E: hannu@opensound.com
D: Maintainer of the sound drivers until 2.1.x days.
diff --git a/MAINTAINERS b/MAINTAINERS
index efbcb50..14a2c51 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4444,6 +4444,17 @@ T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/usb/stk1160/
+H8/300 ARCHITECTURE
+M: Yoshinori Sato <ysato@users.sourceforge.jp>
+L: uclinux-h8-devel@lists.sourceforge.jp
+W: http://uclinux-h8.sourceforge.jp
+T: git git://git.sourceforge.jp/gitroot/uclinux-h8/linux.git
+S: Maintained
+F: arch/h8300/
+F: drivers/clocksource/h8300/
+F: drivers/clk/clk-h83069.c
+F: drivers/clk/clk-h8s2678.c
+
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
M: Frank Seidel <frank@f-seidel.de>
L: platform-driver-x86@vger.kernel.org
--
2.1.4
^ permalink raw reply related [flat|nested] 26+ messages in thread