All of lore.kernel.org
 help / color / mirror / Atom feed
* [LKP] [fanotify] 66ba93c0d7f: i6300esb: Unexpected close, not stopping watchdog!
@ 2015-04-23  6:25 ` Huang Ying
  0 siblings, 0 replies; 7+ messages in thread
From: Huang Ying @ 2015-04-23  6:25 UTC (permalink / raw)
  To: Lino Sanfilippo; +Cc: Linus Torvalds, LKML, LKP ML

[-- Attachment #1: Type: text/plain, Size: 1758 bytes --]

FYI, we noticed the below changes on

git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
commit 66ba93c0d7fe63def447ad0afe380307ff9ebcad ("fanotify: don't set FAN_ONDIR implicitly on a marks ignored mask")

When doing LTP test.  Test system hang after doing some fanotify test cases, while system
can run to reboot in the parent comments.

<<<test_start>>>
tag=fanotify01 stime=1429706735
cmdline="fanotify01"
contacts=""
analysis=exit
<<<test_output>>>
fanotify01    1  TPASS  :  get event: mask=31 pid=11237 fd=8
fanotify01    2  TPASS  :  get event: mask=11 pid=11237 fd=4294967294
fanotify01    3  TPASS  :  get event: mask=10 pid=11237 fd=4294967294
fanotify01    4  TPASS  :  get event: mask=2a pid=11237 fd=9
fanotify01    5  TPASS  :  get event: mask=a pid=11237 fd=4294967294
fanotify01    6  TPASS  :  get event: mask=8 pid=11237 fd=4294967294
fanotify01    7  TPASS  :  get event: mask=20 pid=11237 fd=11
fanotify01    8  TPASS  :  get event: mask=b pid=11237 fd=10
fanotify01    9  TPASS  :  get event: mask=9 pid=11237 fd=4294967294
fanotify01   10  TPASS  :  get event: mask=8 pid=11237 fd=4294967294
fanotify01   11  TPASS  :  get event: mask=2 pid=11237 fd=13
fanotify01   12  TPASS  :  get event: mask=8 pid=11237 fd=12
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fanotify02 stime=1429706735
cmdline="fanotify02"
contacts=""
analysis=exit
<<<test_output>>>
[ 4283.197601] i6300esb: Unexpected close, not stopping watchdog!
[ 4283.200494] systemd-journald[117]: Received SIGTERM from PID 624 (watchdog).
[ 4283.201894] systemd-journald[117]: systemd-journald stopped as pid 117


Thanks,
Ying Huang



[-- Attachment #2: config-3.19.0-00467-g66ba93c0 --]
[-- Type: text/plain, Size: 127550 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.19.0 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_GENERIC_MSI_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not set
# CONFIG_NO_HZ_FULL_SYSIDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_RCU_USER_QS=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_KTHREAD_PRIO=0
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INIT_FALLBACK=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
# CONFIG_MODULE_COMPRESS is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUE_RWLOCK=y
CONFIG_QUEUE_RWLOCK=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=500
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_UP_APIC_MSI=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MOVABLE_NODE=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
# CONFIG_PM_TRACE_RTC is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y

#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_GENEVE is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
CONFIG_NFT_CT=m
CONFIG_NFT_RBTREE=m
CONFIG_NFT_HASH=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_REJECT is not set
CONFIG_NFT_COMPAT=m
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_MAC is not set
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NF_REJECT_IPV4=m
# CONFIG_NFT_REJECT_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NF_REJECT_IPV6=m
# CONFIG_NFT_REJECT_IPV6 is not set
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_PORTS=8191
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_CLS_BPF is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
CONFIG_NET_MPLS_GSO=m
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set

#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_NVME=m
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RSXX=m

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085_I2C is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_LOGGING=y
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_MQ=m
CONFIG_DM_CACHE_CLEANER=m
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_DM_SWITCH=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_RING=m
CONFIG_VHOST=m

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_NET_DSA_MV88E6171 is not set
# CONFIG_NET_DSA_MV88E6352 is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_XGENE is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=y
# CONFIG_BNX2X is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_VXLAN=y
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
# CONFIG_I40E_VXLAN is not set
# CONFIG_I40E_DCB is not set
# CONFIG_I40E_FCOE is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_IP1000=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_EN_VXLAN=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_MLX5_CORE is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
# CONFIG_QLCNIC_VXLAN is not set
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=m
CONFIG_AMD_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=m
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=m
CONFIG_WLAN=y
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
# CONFIG_WL_TI is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_XEN_NETDEV_FRONTEND=m
# CONFIG_XEN_NETDEV_BACKEND is not set
CONFIG_VMXNET3=m
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set

#
# Active cards
#
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_FINTEK is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_SMB347=m
CONFIG_POWER_RESET=y
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_HTU21 is not set
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INT340X_THERMAL is not set

#
# Texas Instruments thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MENF21BMC is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y

#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=m
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW68 is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88TS2022=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y

#
# Direct Rendering Manager
#
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_ADV7511 is not set
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_PTN3460 is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_I915_FBDEV=y
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
# CONFIG_DRM_BOCHS is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
CONFIG_SND_SCS1X=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_HUION is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_FSM is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_DELL_NETBOOKS=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_MCE_INJ is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_SYSTOHC is not set
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_ISL12057 is not set
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_XGENE is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
# CONFIG_DW_DMAC_PCI is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO=m
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_SCSI_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_COMEDI is not set
# CONFIG_PANEL is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_R8723AU is not set
# CONFIG_RTS5208 is not set
# CONFIG_LINE6_USB is not set
# CONFIG_FB_XGI is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LUSTRE_FS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_CRYPTO_SKEIN is not set
# CONFIG_UNISYSSPAR is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_SMO8800 is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_HP_ACCEL=m
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_IPS=m
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=y
# CONFIG_CHROME_PLATFORMS is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_TI is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set

#
# DEVFREQ Drivers
#
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_UEFI_CPER=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set

#
# Runtime Testing
#
CONFIG_LKDTM=m
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=m
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
# CONFIG_CRYPTO_SHA1_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_DRBG_MENU is not set
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
# CONFIG_KVM_DEVICE_ASSIGNMENT is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_ARCH_HAS_SG_CHAIN=y

[-- Attachment #3: Type: text/plain, Size: 89 bytes --]

_______________________________________________
LKP mailing list
LKP@linux.intel.com
\r

[-- Attachment #4: dmesg --]
[-- Type: text/plain, Size: 334206 bytes --]

early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.19.0-00467-g66ba93c0 (kbuild@cairo) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Wed Apr 22 20:35:58 CST 2015
[    0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml ARCH=x86_64 kconfig=x86_64-rhel branch=linus/master commit=66ba93c0d7fe63def447ad0afe380307ff9ebcad BOOT_IMAGE=/kernel/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/vmlinuz-3.19.0-00467-g66ba93c0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/ltp/syscalls/debian-x86_64-2015-02-07.cgz/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-2G-1::dhcp
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f0e60-0x000f0e6f] mapped at [ffff8800000f0e60]
[    0.000000]   mpc: f0e70-f0fac
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x021ef000, 0x021effff] PGTABLE
[    0.000000] BRK [0x021f0000, 0x021f0fff] PGTABLE
[    0.000000] BRK [0x021f1000, 0x021f1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x73e00000-0x73ffffff]
[    0.000000]  [mem 0x73e00000-0x73ffffff] page 2M
[    0.000000] BRK [0x021f2000, 0x021f2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x60000000-0x73dfffff]
[    0.000000]  [mem 0x60000000-0x73dfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[    0.000000]  [mem 0x40000000-0x5fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x74000000-0x7ffdffff]
[    0.000000]  [mem 0x74000000-0x7fdfffff] page 2M
[    0.000000]  [mem 0x7fe00000-0x7ffdffff] page 4k
[    0.000000] BRK [0x021f3000, 0x021f3fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x741af000-0x7ffd7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0BB0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000007FFE198F 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000007FFE0B37 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000007FFE0040 000AF7 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000007FFE0000 000040
[    0.000000] ACPI: SSDT 0x000000007FFE0BAB 000D1C (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x000000007FFE18C7 000090 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000007FFE1957 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff57c000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffdffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x74189000-0x741aefff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:74109001, primary cpu clock
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880071800000-ffff8800737fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0x7ffdffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7ffdffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x7ffdffff]
[    0.000000] On node 0 totalpages: 524158
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8128 pages used for memmap
[    0.000000]   DMA32 zone: 520160 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff57c000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff880073e00000 s89344 r8192 d29440 u524288
[    0.000000] pcpu-alloc: s89344 r8192 d29440 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 73e0e240
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515945
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml ARCH=x86_64 kconfig=x86_64-rhel branch=linus/master commit=66ba93c0d7fe63def447ad0afe380307ff9ebcad BOOT_IMAGE=/kernel/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/vmlinuz-3.19.0-00467-g66ba93c0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/ltp/syscalls/debian-x86_64-2015-02-07.cgz/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-2G-1::dhcp
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Memory: 1849248K/2096632K available (8909K kernel code, 1722K rwdata, 3956K rodata, 1840K init, 1876K bss, 247384K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.19.0-00467-g66ba93c0 (kbuild@cairo) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Wed Apr 22 20:35:58 CST 2015
[    0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml ARCH=x86_64 kconfig=x86_64-rhel branch=linus/master commit=66ba93c0d7fe63def447ad0afe380307ff9ebcad BOOT_IMAGE=/kernel/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/vmlinuz-3.19.0-00467-g66ba93c0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/ltp/syscalls/debian-x86_64-2015-02-07.cgz/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-2G-1::dhcp
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f0e60-0x000f0e6f] mapped at [ffff8800000f0e60]
[    0.000000]   mpc: f0e70-f0fac
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x021ef000, 0x021effff] PGTABLE
[    0.000000] BRK [0x021f0000, 0x021f0fff] PGTABLE
[    0.000000] BRK [0x021f1000, 0x021f1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x73e00000-0x73ffffff]
[    0.000000]  [mem 0x73e00000-0x73ffffff] page 2M
[    0.000000] BRK [0x021f2000, 0x021f2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x60000000-0x73dfffff]
[    0.000000]  [mem 0x60000000-0x73dfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[    0.000000]  [mem 0x40000000-0x5fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x74000000-0x7ffdffff]
[    0.000000]  [mem 0x74000000-0x7fdfffff] page 2M
[    0.000000]  [mem 0x7fe00000-0x7ffdffff] page 4k
[    0.000000] BRK [0x021f3000, 0x021f3fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x741af000-0x7ffd7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0BB0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000007FFE198F 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000007FFE0B37 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000007FFE0040 000AF7 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000007FFE0000 000040
[    0.000000] ACPI: SSDT 0x000000007FFE0BAB 000D1C (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x000000007FFE18C7 000090 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000007FFE1957 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff57c000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffdffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x74189000-0x741aefff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:74109001, primary cpu clock
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880071800000-ffff8800737fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0x7ffdffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7ffdffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x7ffdffff]
[    0.000000] On node 0 totalpages: 524158
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8128 pages used for memmap
[    0.000000]   DMA32 zone: 520160 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff57c000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff880073e00000 s89344 r8192 d29440 u524288
[    0.000000] pcpu-alloc: s89344 r8192 d29440 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 73e0e240
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515945
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml ARCH=x86_64 kconfig=x86_64-rhel branch=linus/master commit=66ba93c0d7fe63def447ad0afe380307ff9ebcad BOOT_IMAGE=/kernel/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/vmlinuz-3.19.0-00467-g66ba93c0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/ltp/syscalls/debian-x86_64-2015-02-07.cgz/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-2G-1::dhcp
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Memory: 1849248K/2096632K available (8909K kernel code, 1722K rwdata, 3956K rodata, 1840K init, 1876K bss, 247384K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] console [ttyS0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.002000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508)
[    0.002325] pid_max: default: 32768 minimum: 301
[    0.003027] ACPI: Core revision 20141107
[    0.005514] ACPI: All ACPI Tables successfully acquired
[    0.006128] Security Framework initialized
[    0.006785] SELinux:  Initializing.
[    0.007010] SELinux:  Starting in permissive mode
[    0.009008] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010335] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.011136] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.012007] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.014165] Initializing cgroup subsys blkio
[    0.015006] Initializing cgroup subsys memory
[    0.015688] Initializing cgroup subsys devices
[    0.016005] Initializing cgroup subsys freezer
[    0.017005] Initializing cgroup subsys net_cls
[    0.018005] Initializing cgroup subsys perf_event
[    0.018712] Initializing cgroup subsys hugetlb
[    0.019065] mce: CPU supports 10 MCE banks
[    0.020039] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.021003] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.022036] Freeing SMP alternatives memory: 36K (ffffffff8200f000 - ffffffff82018000)
[    0.026817] ftrace: allocating 31625 entries in 124 pages
[    0.034063] Getting VERSION: 1050014
[    0.034632] Getting VERSION: 1050014
[    0.035007] Getting ID: 0
[    0.035483] Getting ID: ff000000
[    0.036011] Getting LVT0: 8700
[    0.037005] Getting LVT1: 8400
[    0.037650] x2apic enabled
[    0.038003] Switched APIC routing to physical x2apic.
[    0.039210] enabled ExtINT on CPU#0
[    0.040499] ENABLING IO-APIC IRQs
[    0.041008] init IO_APIC IRQs
[    0.041464]  apic 0 pin 0 not connected
[    0.042009] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0)
[    0.043017] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
[    0.044015] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
[    0.045015] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0)
[    0.046016] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0)
[    0.047015] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:0)
[    0.048015] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:0)
[    0.049014] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:0)
[    0.050014] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0)
[    0.051014] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:0)
[    0.052014] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:0)
[    0.053015] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:0)
[    0.054015] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0)
[    0.055015] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:0)
[    0.056015] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:0)
[    0.057014] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:0)
[    0.058013]  apic 0 pin 16 not connected
[    0.059002]  apic 0 pin 17 not connected
[    0.059541]  apic 0 pin 18 not connected
[    0.060002]  apic 0 pin 19 not connected
[    0.060539]  apic 0 pin 20 not connected
[    0.061002]  apic 0 pin 21 not connected
[    0.061546]  apic 0 pin 22 not connected
[    0.062002]  apic 0 pin 23 not connected
[    0.063142] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064002] Using local APIC timer interrupts.
[    0.064002] calibrating APIC timer ...
[    0.066000] ... lapic delta = 6248770
[    0.066000] ... PM-Timer delta = 357884
[    0.066000] ... PM-Timer result ok
[    0.066000] ..... delta 6248770
[    0.066000] ..... mult: 268382627
[    0.066000] ..... calibration result: 999803
[    0.066000] ..... CPU clock speed is 2692.0974 MHz.
[    0.066000] ..... host bus clock speed is 999.0803 MHz.
[    0.066045] smpboot: CPU0: Intel Core 2 Duo P9xxx (Penryn Class Core 2) (fam: 06, model: 17, stepping: 03)
[    0.068029] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
[    0.070761] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.072114] x86: Booting SMP configuration:
[    0.072979] .... node  #0, CPUs:      #1
[    0.070751] kvm-clock: cpu 1, msr 0:74109041, secondary cpu clock
[    0.070751] masked ExtINT on CPU#1
[    0.087012] KVM setup async PF for cpu 1
[    0.088000]  #2
[    0.088000] kvm-stealtime: cpu 1, msr 73e8e240
[    0.087018] kvm-clock: cpu 2, msr 0:74109081, secondary cpu clock
[    0.087018] masked ExtINT on CPU#2
[    0.100008] KVM setup async PF for cpu 2
[    0.100735]  #3
[    0.100735] kvm-stealtime: cpu 2, msr 73f0e240
[    0.100013] kvm-clock: cpu 3, msr 0:741090c1, secondary cpu clock
[    0.100013] masked ExtINT on CPU#3
[    0.113016] x86: Booted up 1 node, 4 CPUs
[    0.113010] KVM setup async PF for cpu 3
[    0.113013] kvm-stealtime: cpu 3, msr 73f8e240
[    0.114639] smpboot: Total of 4 processors activated (21548.06 BogoMIPS)
[    0.116126] devtmpfs: initialized
[    0.118649] evm: security.selinux
[    0.119003] evm: security.ima
[    0.119467] evm: security.capability
[    0.120265] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.121169] NET: Registered protocol family 16
[    0.125009] cpuidle: using governor menu
[    0.125876] ACPI: bus type PCI registered
[    0.126003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.127092] PCI: Using configuration type 1 for base access
[    0.132086] ACPI: Added _OSI(Module Device)
[    0.133002] ACPI: Added _OSI(Processor Device)
[    0.133643] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.134002] ACPI: Added _OSI(Processor Aggregator Device)
[    0.135445] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:0)
[    0.137875] ACPI: Interpreter enabled
[    0.138006] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[    0.139422] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[    0.141013] ACPI: (supports S0 S3 S4 S5)
[    0.141595] ACPI: Using IOAPIC for interrupt routing
[    0.142015] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.146490] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.147007] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.148007] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.149109] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.150240] acpiphp: Slot [3] registered
[    0.151021] acpiphp: Slot [4] registered
[    0.152020] acpiphp: Slot [5] registered
[    0.152611] acpiphp: Slot [6] registered
[    0.153020] acpiphp: Slot [7] registered
[    0.153591] acpiphp: Slot [8] registered
[    0.154021] acpiphp: Slot [9] registered
[    0.154590] acpiphp: Slot [10] registered
[    0.155021] acpiphp: Slot [11] registered
[    0.156023] acpiphp: Slot [12] registered
[    0.156630] acpiphp: Slot [13] registered
[    0.157021] acpiphp: Slot [14] registered
[    0.157593] acpiphp: Slot [15] registered
[    0.158020] acpiphp: Slot [16] registered
[    0.159023] acpiphp: Slot [17] registered
[    0.159648] acpiphp: Slot [18] registered
[    0.160020] acpiphp: Slot [19] registered
[    0.160590] acpiphp: Slot [20] registered
[    0.161020] acpiphp: Slot [21] registered
[    0.162019] acpiphp: Slot [22] registered
[    0.162643] acpiphp: Slot [23] registered
[    0.163022] acpiphp: Slot [24] registered
[    0.163597] acpiphp: Slot [25] registered
[    0.164022] acpiphp: Slot [26] registered
[    0.165019] acpiphp: Slot [27] registered
[    0.165607] acpiphp: Slot [28] registered
[    0.166020] acpiphp: Slot [29] registered
[    0.166592] acpiphp: Slot [30] registered
[    0.167020] acpiphp: Slot [31] registered
[    0.168009] PCI host bridge to bus 0000:00
[    0.168620] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.169003] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.170002] pci_bus 0000:00: root bus resource [io  0x0d00-0xadff]
[    0.170761] pci_bus 0000:00: root bus resource [io  0xae0f-0xaeff]
[    0.171002] pci_bus 0000:00: root bus resource [io  0xaf20-0xafdf]
[    0.172002] pci_bus 0000:00: root bus resource [io  0xafe4-0xffff]
[    0.173002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.174002] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[    0.174888] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.175283] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.177107] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.186004] pci 0000:00:01.1: reg 0x20: [io  0xc1c0-0xc1cf]
[    0.190022] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.191003] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.192002] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.193002] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.194137] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.195241] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.196010] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.198030] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[    0.200007] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[    0.204007] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[    0.215007] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.216075] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.218004] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.221003] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.232004] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.233147] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.236003] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.239003] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.251176] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[    0.253004] pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0bf]
[    0.256003] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff]
[    0.267238] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000
[    0.270003] pci 0000:00:06.0: reg 0x10: [io  0xc0c0-0xc0ff]
[    0.272003] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff]
[    0.282256] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
[    0.285003] pci 0000:00:07.0: reg 0x10: [io  0xc100-0xc13f]
[    0.288004] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff]
[    0.300199] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000
[    0.303004] pci 0000:00:08.0: reg 0x10: [io  0xc140-0xc17f]
[    0.306003] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff]
[    0.318101] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000
[    0.320003] pci 0000:00:09.0: reg 0x10: [io  0xc180-0xc1bf]
[    0.323003] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff]
[    0.334226] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000
[    0.337003] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f]
[    0.349542] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.350646] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.351640] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.352608] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.353560] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.355274] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.356106] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.356737] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.357003] vgaarb: loaded
[    0.357457] vgaarb: bridge control possible 0000:00:02.0
[    0.358076] SCSI subsystem initialized
[    0.358647] ACPI: bus type USB registered
[    0.359020] usbcore: registered new interface driver usbfs
[    0.360010] usbcore: registered new interface driver hub
[    0.360738] usbcore: registered new device driver usb
[    0.361025] pps_core: LinuxPPS API ver. 1 registered
[    0.362002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.363007] PTP clock support registered
[    0.364068] PCI: Using ACPI for IRQ routing
[    0.364615] PCI: pci_cache_line_size set to 64 bytes
[    0.365134] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.366003] e820: reserve RAM buffer [mem 0x7ffe0000-0x7fffffff]
[    0.367118] NetLabel: Initializing
[    0.367629] NetLabel:  domain hash size = 128
[    0.368001] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.368660] NetLabel:  unlabeled traffic allowed by default
[    0.369131] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.370014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.371486] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.379031] Switched to clocksource kvm-clock
[    0.387927] pnp: PnP ACPI init
[    0.388461] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0)
[    0.389545] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.390366] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0)
[    0.391445] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.392251] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0)
[    0.393343] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.394256] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:0)
[    0.395326] pnp 00:03: [dma 2]
[    0.395809] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.396633] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:0)
[    0.397714] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.398532] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0)
[    0.399612] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.400587] pnp: PnP ACPI: found 6 devices
[    0.406668] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.407353] pci_bus 0000:00: resource 5 [io  0x0d00-0xadff]
[    0.408037] pci_bus 0000:00: resource 6 [io  0xae0f-0xaeff]
[    0.408706] pci_bus 0000:00: resource 7 [io  0xaf20-0xafdf]
[    0.409385] pci_bus 0000:00: resource 8 [io  0xafe4-0xffff]
[    0.410072] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
[    0.410804] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff]
[    0.411574] NET: Registered protocol family 2
[    0.412283] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.413277] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.414073] TCP: Hash tables configured (established 16384 bind 16384)
[    0.415197] TCP: reno registered
[    0.415669] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.416397] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.417199] NET: Registered protocol family 1
[    0.417991] RPC: Registered named UNIX socket transport module.
[    0.418724] RPC: Registered udp transport module.
[    0.419337] RPC: Registered tcp transport module.
[    0.419941] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.420753] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.421669] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.422730] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.423823] pci 0000:00:02.0: Video device with shadowed ROM
[    0.424902] PCI: CLS 0 bytes, default 64
[    0.425833] Unpacking initramfs...
[    3.285624] Freeing initrd memory: 194724K (ffff8800741af000 - ffff88007ffd8000)
[    3.288471] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    3.289870] Initialise system trusted keyring
[    3.290947] audit: initializing netlink subsys (disabled)
[    3.292162] audit: type=2000 audit(1429706388.739:1): initialized
[    3.293879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.297225] zpool: loaded
[    3.297911] zbud: loaded
[    3.298825] VFS: Disk quotas dquot_6.5.2
[    3.299737] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.301700] SGI XFS with ACLs, security attributes, no debug enabled
[    3.303551] 9p: Installing v9fs 9p2000 file system support
[    3.304752] Key type big_key registered
[    3.305605] SELinux:  Registering netfilter hooks
[    3.308086] NET: Registered protocol family 38
[    3.309075] Key type asymmetric registered
[    3.309983] Asymmetric key parser 'x509' registered
[    3.311059] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    3.312738] io scheduler noop registered
[    3.313685] io scheduler deadline registered (default)
[    3.314914] io scheduler cfq registered
[    3.316018] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.317253] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    3.318644] intel_idle: does not run on family 6 model 23
[    3.319914] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    3.321678] ACPI: Power Button [PWRF]
[    3.322933] GHES: HEST is not enabled!
[    3.354729] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    3.355548] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:0)
[    3.381983] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    3.382758] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:0)
[    3.409192] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    3.435213] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    3.486114] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.511102] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.512741] Non-volatile memory driver v1.3
[    3.513400] Linux agpgart interface v0.103
[    3.515423]  vda: unknown partition table
[    3.516889]  vdb: unknown partition table
[    3.518355]  vdc: unknown partition table
[    3.520439]  vdd: unknown partition table
[    3.521889]  vde: unknown partition table
[    3.523148]  vdf: unknown partition table
[    3.523872] rdac: device handler registered
[    3.524583] hp_sw: device handler registered
[    3.525244] emc: device handler registered
[    3.525867] alua: device handler registered
[    3.526535] libphy: Fixed MDIO Bus: probed
[    3.527200] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    3.528132] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    3.857807] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    3.858800] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    3.859737] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    3.860518] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    3.861320] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
[    3.862214] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.862971] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.0.1-k
[    3.864063] ixgbe: Copyright (c) 1999-2014 Intel Corporation.
[    3.864885] usbcore: registered new interface driver catc
[    3.865623] usbcore: registered new interface driver kaweth
[    3.866382] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    3.867464] usbcore: registered new interface driver pegasus
[    3.868235] usbcore: registered new interface driver rtl8150
[    3.869012] usbcore: registered new interface driver asix
[    3.869747] usbcore: registered new interface driver cdc_ether
[    3.871320] usbcore: registered new interface driver cdc_eem
[    3.872086] usbcore: registered new interface driver dm9601
[    3.872838] usbcore: registered new interface driver smsc75xx
[    3.873611] usbcore: registered new interface driver smsc95xx
[    3.874392] usbcore: registered new interface driver gl620a
[    3.875153] usbcore: registered new interface driver net1080
[    3.875910] usbcore: registered new interface driver plusb
[    3.876655] usbcore: registered new interface driver rndis_host
[    3.877457] usbcore: registered new interface driver cdc_subset
[    3.878255] usbcore: registered new interface driver zaurus
[    3.879017] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    3.880098] usbcore: registered new interface driver int51x1
[    3.880944] usbcore: registered new interface driver ipheth
[    3.881704] usbcore: registered new interface driver sierra_net
[    3.882562] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.883423] ehci-pci: EHCI PCI platform driver
[    3.884075] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.884881] ohci-pci: OHCI PCI platform driver
[    3.885520] uhci_hcd: USB Universal Host Controller Interface driver
[    3.886397] usbcore: registered new interface driver usbserial
[    3.887183] usbcore: registered new interface driver usbserial_generic
[    3.888027] usbserial: USB Serial support registered for generic
[    3.888832] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    3.890605] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.891521] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.892445] mousedev: PS/2 mouse device common for all mice
[    3.893670] rtc_cmos 00:00: RTC can wake from S4
[    3.894592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    3.896051] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    3.897111] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    3.898063] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05
[    3.899115] i6300esb: initialized (0xffffc900003e0000). heartbeat=30 sec (nowayout=0)
[    3.900251] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.901062] iTCO_vendor_support: vendor-support=0
[    3.901889] hidraw: raw HID events driver (C) Jiri Kosina
[    3.902925] usbcore: registered new interface driver usbhid
[    3.903673] usbhid: USB HID core driver
[    3.904334] drop_monitor: Initializing network drop monitor service
[    3.905780] TCP: cubic registered
[    3.906352] Initializing XFRM netlink socket
[    3.907280] NET: Registered protocol family 10
[    3.908466] NET: Registered protocol family 17
[    3.909135] 9pnet: Installing 9P2000 support
[    3.910085] ... APIC ID:      00000000 (0)
[    3.910695] ... APIC VERSION: 01050014
[    3.911005] 0000000000000000000000000000000000000000000000000000000000000000
[    3.911005] 000000000e200000000000000000000000000000000000000000000000000000
[    3.911005] 0000000001000000000000000000000000000000000000000000000000008000
[    3.911005] 
[    3.915889] number of MP IRQ sources: 15.
[    3.916562] number of IO-APIC #0 registers: 24.
[    3.917220] testing the IO APIC.......................
[    3.917935] IO APIC #0......
[    3.918418] .... register #00: 00000000
[    3.918989] .......    : physical APIC id: 00
[    3.919609] .......    : Delivery Type: 0
[    3.920239] .......    : LTS          : 0
[    3.920826] .... register #01: 00170011
[    3.921405] .......     : max redirection entries: 17
[    3.922100] .......     : PRQ implemented: 0
[    3.922708] .......     : IO APIC version: 11
[    3.923340] .... register #02: 00000000
[    3.923910] .......     : arbitration: 00
[    3.924513] .... IRQ redirection table:
[    3.925108] 1    0    0   0   0    0    0    00
[    3.925755] 0    0    0   0   0    0    0    31
[    3.926431] 0    0    0   0   0    0    0    30
[    3.927117] 0    0    0   0   0    0    0    33
[    3.927765] 1    0    0   0   0    0    0    34
[    3.928456] 1    1    0   0   0    0    0    35
[    3.929122] 0    0    0   0   0    0    0    36
[    3.929770] 0    0    0   0   0    0    0    37
[    3.930423] 0    0    0   0   0    0    0    38
[    3.931085] 0    1    0   0   0    0    0    39
[    3.931789] 1    1    0   0   0    0    0    3A
[    3.932441] 1    1    0   0   0    0    0    3B
[    3.933095] 0    0    0   0   0    0    0    3C
[    3.933742] 0    0    0   0   0    0    0    3D
[    3.934401] 0    0    0   0   0    0    0    3E
[    3.935065] 0    0    0   0   0    0    0    3F
[    3.935718] 1    0    0   0   0    0    0    00
[    3.936374] 1    0    0   0   0    0    0    00
[    3.937032] 1    0    0   0   0    0    0    00
[    3.937681] 1    0    0   0   0    0    0    00
[    3.938337] 1    0    0   0   0    0    0    00
[    3.938985] 1    0    0   0   0    0    0    00
[    3.939637] 1    0    0   0   0    0    0    00
[    3.940324] 1    0    0   0   0    0    0    00
[    3.940976] IRQ to pin mappings:
[    3.941494] IRQ0 -> 0:2
[    3.942066] IRQ1 -> 0:1
[    3.942632] IRQ3 -> 0:3
[    3.943229] IRQ4 -> 0:4
[    3.943909] IRQ5 -> 0:5
[    3.944519] IRQ6 -> 0:6
[    3.945106] IRQ7 -> 0:7
[    3.945682] IRQ8 -> 0:8
[    3.946276] IRQ9 -> 0:9
[    3.946861] IRQ10 -> 0:10
[    3.947472] IRQ11 -> 0:11
[    3.948079] IRQ12 -> 0:12
[    3.948683] IRQ13 -> 0:13
[    3.949289] IRQ14 -> 0:14
[    3.949885] IRQ15 -> 0:15
[    3.950488] .................................... done.
[    3.951424] Loading compiled-in X.509 certificates
[    3.952877] Loaded X.509 cert 'Magrathea: Glacier signing key: b2161fbca36d922d04d0b311a071a03964ce7490'
[    3.954221] registered taskstats version 1
[    3.956589] Key type trusted registered
[    3.960110] Key type encrypted registered
[    3.960717] ima: No TPM chip found, activating TPM-bypass!
[    3.961498] evm: HMAC attrs: 0x1
[    3.962609] rtc_cmos 00:00: setting system clock to 2015-04-22 20:39:49 UTC (1429735189)
[    3.966091] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.288095] tsc: Refined TSC clocksource calibration: 2693.505 MHz
[    4.741845] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    5.968511] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[    5.970619] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.981026] Sending DHCP requests ., OK
[    5.987037] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[    5.988306] IP-Config: Complete:
[    5.988836]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[    5.990122]      host=vm-vp-2G-1, domain=, nis-domain=(none)
[    5.990876]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=
[    5.991547]      nameserver0=10.0.2.3
[    5.992409] PM: Hibernation image not present or could not be loaded.
[    5.993945] Freeing unused kernel memory: 1840K (ffffffff81e43000 - ffffffff8200f000)
[    5.996545] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[    5.998215] random: systemd urandom read with 7 bits of entropy available
[    6.013447] systemd-default-display-manager-generator[96]: No /etc/X11/default-display-manager file, nothing to generate
[    6.016703] systemd-gpt-auto-generator[97]: Root file system not on a (single) block device.
[    6.019214] systemd-fstab-generator[98]: Parsing /etc/fstab
[    6.021086] systemd-rc-local-generator[99]: Automatically adding rc-local.service.
[    6.023681] systemd-sysv-generator[100]: Looking for unit files in (higher priority first):
[    6.023695] systemd-sysv-generator[100]: Looking for SysV init scripts in:
[    6.023698] systemd-sysv-generator[100]: Looking for SysV rcN.d links in:
[    6.024610] systemd-sysv-generator[100]: Ignoring S03mountdevsubfs.sh symlink in rcS.d, not generating mountdevsubfs.service.
[    6.024613] systemd-sysv-generator[100]: Ignoring S10udev-finish symlink in rcS.d, not generating udev-finish.service.
[    6.024616] systemd-sysv-generator[100]: Ignoring S16x11-common symlink in rcS.d, not generating x11-common.service.
[    6.024618] systemd-sysv-generator[100]: Ignoring S10procps symlink in rcS.d, not generating procps.service.
[    6.024620] systemd-sysv-generator[100]: Ignoring S14mountnfs.sh symlink in rcS.d, not generating mountnfs.service.
[    6.024622] systemd-sysv-generator[100]: Ignoring S15mountnfs-bootclean.sh symlink in rcS.d, not generating mountnfs-bootclean.service.
[    6.024625] systemd-sysv-generator[100]: Ignoring S07checkroot-bootclean.sh symlink in rcS.d, not generating checkroot-bootclean.service.
[    6.024627] systemd-sysv-generator[100]: Ignoring S05checkroot.sh symlink in rcS.d, not generating checkroot.service.
[    6.024631] systemd-sysv-generator[100]: Ignoring S04hwclock.sh symlink in rcS.d, not generating hwclock.service.
[    6.024634] systemd-sysv-generator[100]: Ignoring S09mountall-bootclean.sh symlink in rcS.d, not generating mountall-bootclean.service.
[    6.024636] systemd-sysv-generator[100]: Ignoring S10urandom symlink in rcS.d, not generating urandom.service.
[    6.024638] systemd-sysv-generator[100]: Ignoring S07kmod symlink in rcS.d, not generating kmod.service.
[    6.024640] systemd-sysv-generator[100]: Ignoring S16bootmisc.sh symlink in rcS.d, not generating bootmisc.service.
[    6.024642] systemd-sysv-generator[100]: Ignoring S01mountkernfs.sh symlink in rcS.d, not generating mountkernfs.service.
[    6.024644] systemd-sysv-generator[100]: Ignoring S01hostname.sh symlink in rcS.d, not generating hostname.service.
[    6.024645] systemd-sysv-generator[100]: Ignoring S02udev symlink in rcS.d, not generating udev.service.
[    6.024648] systemd-sysv-generator[100]: Ignoring S06checkfs.sh symlink in rcS.d, not generating checkfs.service.
[    6.024650] systemd-sysv-generator[100]: Ignoring S08mountall.sh symlink in rcS.d, not generating mountall.service.
[    6.024658] systemd-sysv-generator[100]: Ignoring K02ipmievd symlink in rc1.d, not generating ipmievd.service.
[    6.024660] systemd-sysv-generator[100]: Ignoring S01bootlogs symlink in rc1.d, not generating bootlogs.service.
[    6.024662] systemd-sysv-generator[100]: Ignoring S01killprocs symlink in rc1.d, not generating killprocs.service.
[    6.024664] systemd-sysv-generator[100]: Ignoring S01motd symlink in rc1.d, not generating motd.service.
[    6.024666] systemd-sysv-generator[100]: Ignoring K02mdadm symlink in rc1.d, not generating mdadm.service.
[    6.024669] systemd-sysv-generator[100]: Ignoring S02single symlink in rc1.d, not generating single.service.
[    6.024673] systemd-sysv-generator[100]: Ignoring K01watchdog symlink in rc1.d, not generating watchdog.service.
[    6.024682] systemd-sysv-generator[100]: Ignoring S77lkp-bootstrap symlink in rc2.d, not generating lkp-bootstrap.service.
[    6.024685] systemd-sysv-generator[100]: Ignoring S15wd_keepalive symlink in rc2.d, not generating wd_keepalive.service.
[    6.024687] systemd-sysv-generator[100]: Ignoring S01bootlogs symlink in rc2.d, not generating bootlogs.service.
[    6.024690] systemd-sysv-generator[100]: Ignoring S15ssh symlink in rc2.d, not generating ssh.service.
[    6.024692] systemd-sysv-generator[100]: Ignoring S15dbus symlink in rc2.d, not generating dbus.service.
[    6.024695] systemd-sysv-generator[100]: Ignoring S16watchdog symlink in rc2.d, not generating watchdog.service.
[    6.024697] systemd-sysv-generator[100]: Ignoring S01motd symlink in rc2.d, not generating motd.service.
[    6.024700] systemd-sysv-generator[100]: Ignoring S16rmnologin symlink in rc2.d, not generating rmnologin.service.
[    6.024702] systemd-sysv-generator[100]: Ignoring S15cron symlink in rc2.d, not generating cron.service.
[    6.024704] systemd-sysv-generator[100]: Ignoring S01mdadm symlink in rc2.d, not generating mdadm.service.
[    6.024706] systemd-sysv-generator[100]: Ignoring S15ipmievd symlink in rc2.d, not generating ipmievd.service.
[    6.024708] systemd-sysv-generator[100]: Ignoring S16rc.local symlink in rc2.d, not generating rc.local.service.
[    6.024717] systemd-sysv-generator[100]: Ignoring S15wd_keepalive symlink in rc3.d, not generating wd_keepalive.service.
[    6.024719] systemd-sysv-generator[100]: Ignoring S01bootlogs symlink in rc3.d, not generating bootlogs.service.
[    6.024722] systemd-sysv-generator[100]: Ignoring S15ssh symlink in rc3.d, not generating ssh.service.
[    6.024724] systemd-sysv-generator[100]: Ignoring S15dbus symlink in rc3.d, not generating dbus.service.
[    6.024727] systemd-sysv-generator[100]: Ignoring S16watchdog symlink in rc3.d, not generating watchdog.service.
[    6.024729] systemd-sysv-generator[100]: Ignoring S01motd symlink in rc3.d, not generating motd.service.
[    6.024732] systemd-sysv-generator[100]: Ignoring S16rmnologin symlink in rc3.d, not generating rmnologin.service.
[    6.024734] systemd-sysv-generator[100]: Ignoring S15cron symlink in rc3.d, not generating cron.service.
[    6.024736] systemd-sysv-generator[100]: Ignoring S01mdadm symlink in rc3.d, not generating mdadm.service.
[    6.024738] systemd-sysv-generator[100]: Ignoring S15ipmievd symlink in rc3.d, not generating ipmievd.service.
[    6.024740] systemd-sysv-generator[100]: Ignoring S16rc.local symlink in rc3.d, not generating rc.local.service.
[    6.024749] systemd-sysv-generator[100]: Ignoring S15wd_keepalive symlink in rc4.d, not generating wd_keepalive.service.
[    6.024751] systemd-sysv-generator[100]: Ignoring S01bootlogs symlink in rc4.d, not generating bootlogs.service.
[    6.024754] systemd-sysv-generator[100]: Ignoring S15ssh symlink in rc4.d, not generating ssh.service.
[    6.024756] systemd-sysv-generator[100]: Ignoring S15dbus symlink in rc4.d, not generating dbus.service.
[    6.024759] systemd-sysv-generator[100]: Ignoring S16watchdog symlink in rc4.d, not generating watchdog.service.
[    6.024761] systemd-sysv-generator[100]: Ignoring S01motd symlink in rc4.d, not generating motd.service.
[    6.024764] systemd-sysv-generator[100]: Ignoring S16rmnologin symlink in rc4.d, not generating rmnologin.service.
[    6.024766] systemd-sysv-generator[100]: Ignoring S15cron symlink in rc4.d, not generating cron.service.
[    6.024768] systemd-sysv-generator[100]: Ignoring S01mdadm symlink in rc4.d, not generating mdadm.service.
[    6.024769] systemd-sysv-generator[100]: Ignoring S15ipmievd symlink in rc4.d, not generating ipmievd.service.
[    6.024772] systemd-sysv-generator[100]: Ignoring S16rc.local symlink in rc4.d, not generating rc.local.service.
[    6.024780] systemd-sysv-generator[100]: Ignoring S15wd_keepalive symlink in rc5.d, not generating wd_keepalive.service.
[    6.024782] systemd-sysv-generator[100]: Ignoring S01bootlogs symlink in rc5.d, not generating bootlogs.service.
[    6.024786] systemd-sysv-generator[100]: Ignoring S15ssh symlink in rc5.d, not generating ssh.service.
[    6.024787] systemd-sysv-generator[100]: Ignoring S15dbus symlink in rc5.d, not generating dbus.service.
[    6.024791] systemd-sysv-generator[100]: Ignoring S16watchdog symlink in rc5.d, not generating watchdog.service.
[    6.024792] systemd-sysv-generator[100]: Ignoring S01motd symlink in rc5.d, not generating motd.service.
[    6.024795] systemd-sysv-generator[100]: Ignoring S16rmnologin symlink in rc5.d, not generating rmnologin.service.
[    6.024797] systemd-sysv-generator[100]: Ignoring S15cron symlink in rc5.d, not generating cron.service.
[    6.024799] systemd-sysv-generator[100]: Ignoring S01mdadm symlink in rc5.d, not generating mdadm.service.
[    6.024807] systemd-sysv-generator[100]: Ignoring S15ipmievd symlink in rc5.d, not generating ipmievd.service.
[    6.024812] systemd-sysv-generator[100]: Ignoring S16rc.local symlink in rc5.d, not generating rc.local.service.
[    6.024823] systemd-sysv-generator[100]: Ignoring K02ipmievd symlink in rc0.d, not generating ipmievd.service.
[    6.024826] systemd-sysv-generator[100]: Ignoring K09umountroot symlink in rc0.d, not generating umountroot.service.
[    6.024829] systemd-sysv-generator[100]: Ignoring K10mdadm-waitidle symlink in rc0.d, not generating mdadm-waitidle.service.
[    6.024831] systemd-sysv-generator[100]: Ignoring K11halt symlink in rc0.d, not generating halt.service.
[    6.024833] systemd-sysv-generator[100]: Ignoring K04sendsigs symlink in rc0.d, not generating sendsigs.service.
[    6.024835] systemd-sysv-generator[100]: Ignoring K02mdadm symlink in rc0.d, not generating mdadm.service.
[    6.024837] systemd-sysv-generator[100]: Ignoring K08umountfs symlink in rc0.d, not generating umountfs.service.
[    6.024840] systemd-sysv-generator[100]: Ignoring K05umountnfs.sh symlink in rc0.d, not generating umountnfs.service.
[    6.024842] systemd-sysv-generator[100]: Ignoring K02urandom symlink in rc0.d, not generating urandom.service.
[    6.024845] systemd-sysv-generator[100]: Ignoring K07hwclock.sh symlink in rc0.d, not generating hwclock.service.
[    6.024847] systemd-sysv-generator[100]: Ignoring K01watchdog symlink in rc0.d, not generating watchdog.service.
[    6.024856] systemd-sysv-generator[100]: Ignoring K02ipmievd symlink in rc6.d, not generating ipmievd.service.
[    6.024859] systemd-sysv-generator[100]: Ignoring K09umountroot symlink in rc6.d, not generating umountroot.service.
[    6.024862] systemd-sysv-generator[100]: Ignoring K10mdadm-waitidle symlink in rc6.d, not generating mdadm-waitidle.service.
[    6.024864] systemd-sysv-generator[100]: Ignoring K04sendsigs symlink in rc6.d, not generating sendsigs.service.
[    6.024866] systemd-sysv-generator[100]: Ignoring K12reboot symlink in rc6.d, not generating reboot.service.
[    6.024868] systemd-sysv-generator[100]: Ignoring K02mdadm symlink in rc6.d, not generating mdadm.service.
[    6.024870] systemd-sysv-generator[100]: Ignoring K08umountfs symlink in rc6.d, not generating umountfs.service.
[    6.024873] systemd-sysv-generator[100]: Ignoring K05umountnfs.sh symlink in rc6.d, not generating umountnfs.service.
[    6.024875] systemd-sysv-generator[100]: Ignoring K02urandom symlink in rc6.d, not generating urandom.service.
[    6.024878] systemd-sysv-generator[100]: Ignoring K07hwclock.sh symlink in rc6.d, not generating hwclock.service.
[    6.024881] systemd-sysv-generator[100]: Ignoring K01watchdog symlink in rc6.d, not generating watchdog.service.
[    6.290840] systemd-journald[117]: Fixed max_use=99.8M max_size=12.4M min_size=4.0M keep_free=149.8M
[    6.291849] systemd-journald[117]: Reserving 22734 entries in hash table.
[    6.292119] systemd-journald[117]: Vacuuming...
[    6.292129] systemd-journald[117]: Vacuuming done, freed 0 bytes
[    6.292239] systemd-journald[117]: Flushing /dev/kmsg...
[    6.292979] systemd-journald[117]: Compressed data object 905 -> 612
[    6.295306] systemd-journald[117]: Compressed data object 912 -> 616
[    6.305853] systemd-journald[117]: systemd-journald running as pid 117
[    6.345285] systemd-udevd[137]: starting version 215
[    6.374921] parport_pc 00:04: reported by Plug and Play ACPI
[    6.376311] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    6.378086] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[    6.380151] systemd-journald[117]: Received request to flush runtime journal from PID 1
[    6.381458] systemd-journald[117]: Vacuuming...
[    6.382127] systemd-journald[117]: Vacuuming done, freed 0 bytes
[    6.402051] microcode: CPU0 sig=0x10673, pf=0x1, revision=0x1
[    6.403706] microcode: CPU1 sig=0x10673, pf=0x1, revision=0x1
[    6.404508] microcode: CPU2 sig=0x10673, pf=0x1, revision=0x1
[    6.405330] microcode: CPU3 sig=0x10673, pf=0x1, revision=0x1
[    6.406416] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    6.414602] [drm] Initialized drm 1.1.0 20060810
[    6.414683] Floppy drive(s): fd0 is 1.44M
[    6.416683] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    6.417814] libata version 3.00 loaded.
[    6.419790] ata_piix 0000:00:01.1: version 2.13
[    6.426748] FDC 0 is a S82078B
[    6.433312] scsi host0: ata_piix
[    6.435092] scsi host1: ata_piix
[    6.435131] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1c0 irq 14
[    6.435134] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1c8 irq 15

==> /tmp/lkp/stdout <==

==> /tmp/lkp/stderr <==
[    6.445211] Error: Driver 'pcspkr' is already registered, aborting...
[    6.446978] ppdev: user-space parallel port driver
[    6.453834] [TTM] Zone  kernel: Available graphics memory: 1022924 kiB
[    6.454717] [TTM] Initializing pool allocator
LKP: HOSTNAME , MAC 52:54:00:12:34:56, kernel 3.19.0-00467-g66ba93c0 1, serial console /dev/ttyS0

==> /tmp/lkp/stdout <==
Kernel tests: Boot OK!
[    6.457307] [TTM] Initializing DMA pool allocator
[    6.457561] [drm] fb mappable at 0xFC000000
[    6.457562] [drm] vram aper at 0xFC000000
[    6.457562] [drm] size 33554432
[    6.457562] [drm] fb depth is 24
[    6.457563] [drm]    pitch is 3072
[    6.463817] fbcon: cirrusdrmfb (fb0) is primary device
[    6.477103] Console: switching to colour frame buffer device 128x48
[    6.486157] cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device
[    6.486158] cirrus 0000:00:02.0: registered panic notifier
[    6.496164] [drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0
[    6.586409] ata2.01: NODEV after polling detection
[    6.587069] ata2.00: ATAPI: QEMU DVD-ROM, 2.1.2, max UDMA/100
[    6.588706] ata2.00: configured for MWDMA2
[    6.590371] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.1. PQ: 0 ANSI: 5
[    6.609548] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    6.611515] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.613229] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    6.616940] sr 1:0:0:0: Attached scsi generic sg0 type 5
22 Apr 20:40:48 ntpdate[294]: step time server 192.168.1.1 offset 50.377600 sec
/lkp/lkp/src/bin/run-lkp
RESULT_ROOT=/result/vm-vp-2G/ltp/syscalls/debian-x86_64-2015-02-07.cgz/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/0
job=/lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml
[   12.584827] Key type dns_resolver registered
[   12.593542] NFS: Registering the id_resolver key type
[   12.594013] Key type id_resolver registered
[   12.594356] Key type id_legacy registered
run-job /lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml
2015-04-22 20:40:49 ./runltp -f syscalls
INFO: creating /lkp/benchmarks/ltp/output directory
INFO: creating /lkp/benchmarks/ltp/results directory
Checking for required user/group ids

'nobody' user id and group found.
'bin' user id and group found.
'daemon' user id and group found.
Users group found.
Sys group found.
Required users/groups exist.
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
 
PRETTY_NAME="Debian GNU/Linux 8 (jessie)"
NAME="Debian GNU/Linux"
VERSION_ID="8"
VERSION="8 (jessie)"
ID=debian
HOME_URL="http://www.debian.org/"
SUPPORT_URL="http://www.debian.org/support/"
BUG_REPORT_URL="https://bugs.debian.org/"
Linux vm-vp-2G-1 3.19.0-00467-g66ba93c0 #1 SMP Wed Apr 22 20:35:58 CST 2015 x86_64 GNU/Linux
 
Gnu C                 
util-linux             linux 2.25.2
mount                  linux 2.25.2 (libmount 2.25.0: selinux, assert, debug)
modutils               18
e2fsprogs              1.42.12
Linux C Library        > libc.2.19
Dynamic linker (ldd)   2.19

==> /tmp/lkp/stderr <==
/usr/bin/ldd: line 41: printf: write error: Broken pipe
/usr/bin/ldd: line 43: printf: write error: Broken pipe

==> /tmp/lkp/stdout <==
Procps                 3.3.10
Net-tools              1.60
iproute2              iproute2-ss140804
Kbd                    69:
Sh-utils               8.23
Modules Loaded         rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver sg sr_mod cdrom ata_generic pata_acpi cirrus syscopyarea sysfillrect sysimgblt ttm ppdev snd_pcm drm_kms_helper snd_timer snd ata_piix soundcore pcspkr libata serio_raw floppy drm microcode i2c_piix4 parport_pc parport

free reports:
              total        used        free      shared  buff/cache   available
Mem:        2045848       35604     1339736        8564      670508     1859396
Swap:             0           0           0

/proc/cpuinfo
power management:

power management:

power management:

power management:

[   13.996355] loop: module loaded
no big block device was specified on commandline.
Tests which require a big block device are disabled.
You can specify it with option -z
COMMAND:    /lkp/benchmarks/ltp/bin/ltp-pan  -e -S   -a 390     -n 390  -p  -f /tmp/ltp-IiL6bmTun7/alltests -l /lkp/benchmarks/ltp/results/LTP_RUN_ON-2015_04_22-20h_40m_49s.log  -C /lkp/benchmarks/ltp/output/LTP_RUN_ON-2015_04_22-20h_40m_49s.failed -T /lkp/benchmarks/ltp/output/LTP_RUN_ON-2015_04_22-20h_40m_49s.tconf
LOG File: /lkp/benchmarks/ltp/results/LTP_RUN_ON-2015_04_22-20h_40m_49s.log
FAILED COMMAND File: /lkp/benchmarks/ltp/output/LTP_RUN_ON-2015_04_22-20h_40m_49s.failed
TCONF COMMAND File: /lkp/benchmarks/ltp/output/LTP_RUN_ON-2015_04_22-20h_40m_49s.tconf
Running tests.......
<<<test_start>>>
tag=abort01 stime=1429706449
cmdline="abort01"
contacts=""
analysis=exit
<<<test_output>>>
abort01     0  TINFO  :  Adjusting RLIMIT_CORE to 1048576
abort01     1  TPASS  :  abort dumped core
abort01     2  TPASS  :  abort raised SIGIOT
abort01     3  TPASS  :  abort dumped core
abort01     4  TPASS  :  abort raised SIGIOT
abort01     5  TPASS  :  abort dumped core
abort01     6  TPASS  :  abort raised SIGIOT
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=accept01 stime=1429706449
cmdline="accept01"
contacts=""
analysis=exit
<<<test_output>>>
accept01    1  TPASS  :  bad file descriptor successful
accept01    2  TPASS  :  bad file descriptor successful
accept01    3  TPASS  :  invalid socket buffer successful
accept01    4  TPASS  :  invalid salen successful
accept01    5  TPASS  :  invalid salen successful
accept01    6  TPASS  :  no queued connections successful
accept01    7  TPASS  :  UDP accept successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=accept4_01 stime=1429706449
cmdline="accept4_01"
contacts=""
analysis=exit
<<<test_output>>>
accept04_01    1  TPASS  :  Test passed
accept04_01    2  TPASS  :  Test passed
accept04_01    3  TPASS  :  Test passed
accept04_01    4  TPASS  :  Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=access01 stime=1429706449
cmdline="access01"
contacts=""
analysis=exit
<<<test_output>>>
access01    1  TPASS  :  access(accessfile, F_OK) returned 0
access01    2  TPASS  :  access(accessfile, X_OK) returned 0
access01    3  TPASS  :  access(accessfile, W_OK) returned 0
access01    4  TPASS  :  access(accessfile, R_OK) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=access02 stime=1429706449
cmdline="access02"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=access03 stime=1429706449
cmdline="access03"
contacts=""
analysis=exit
<<<test_output>>>
access03    1  TPASS  :  access(0x7fa08a11f000, R_OK) failed as expected with EFAULT
access03    2  TPASS  :  access(0x7fa08a11f000, W_OK) failed as expected with EFAULT
access03    3  TPASS  :  access(0x7fa08a11f000, X_OK) failed as expected with EFAULT
access03    4  TPASS  :  access(0x7fa08a11f000, F_OK) failed as expected with EFAULT
access03    5  TPASS  :  access(0x2314001, R_OK) failed as expected with EFAULT
access03    6  TPASS  :  access(0x2314001, W_OK) failed as expected with EFAULT
access03    7  TPASS  :  access(0x2314001, X_OK) failed as expected with EFAULT
access03    8  TPASS  :  access(0x2314001, F_OK) failed as expected with EFAULT
[   14.029571] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem

<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=n
[   14.029788] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
o
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=access04 stime=1429706449
cmdline="access04"
contacts=""
analysis=exit
<<<test_output>>>
access04    1  TPASS  :  functionality of access(testdir/testfile, F_OK) ok
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=access05 stime=1429706449
cmdline="access05"
contacts=""
analysis=exit
<<<test_output>>>
access05    1  TPASS  :  access failed as expected: TEST_ERRNO=EACCES(13): Permission denied
access05    2  TPASS  :  access failed as expected: TEST_ERRNO=EACCES(13): Permission denied
access05    3  TPASS  :  access failed as expected: TEST_ERRNO=EACCES(13): Permission denied
access05    4  TPASS  :  access failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
access05    5  TPASS  :  access failed as expected: TEST_ERRNO=EFAULT(14): Bad address
access05    6  TPASS  :  access failed as expected: TEST_ERRNO=EFAULT(14): Bad address
access05    7  TPASS  :  access failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
access05    8  TPASS  :  access failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
access05    9  TPASS  :  access failed as expected: TEST_ERRNO=ENOTDIR(20): Not a directory
access05   10  TPASS  :  access failed as expected: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=access06 stime=1429706449
cmdline="access06"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
access06    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
access06    0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
access06    1  TPASS  :  access failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=acct01 stime=1429706450
cmdline="acct01"
contacts=""
analysis=exit
<<<test_output>>>
[   14.156353] Process accounting resumed
mke2fs 1.42.12 (29-Aug-2014)
[   14.160736] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[   14.161156] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
[   14.161786] EXT4-fs (loop0): re-mounted. Opts: (null)
acct01      0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
acct01      0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
acct01      1  TPASS  :  acct failed as expected: TEST_ERRNO=EISDIR(21): Is a directory
acct01      2  TPASS  :  acct failed as expected: TEST_ERRNO=EACCES(13): Permission denied
acct01      3  TPASS  :  acct failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
acct01      4  TPASS  :  acct failed as expected: TEST_ERRNO=ENOTDIR(20): Not a directory
acct01      5  TPASS  :  acct failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
acct01      6  TPASS  :  acct failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
acct01      7  TPASS  :  acct failed as expected: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
acct01      8  TPASS  :  acct failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
acct01      9  TPASS  :  acct failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=add_key01 stime=1429706450
cmdline="add_key01"
contacts=""
analysis=exit
<<<test_output>>>
add_key01    1  TPASS  :  add_key call succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=add_key02 stime=1429706450
cmdline="add_key02"
contacts=""
analysis=exit
<<<test_output>>>
add_key02    1  TPASS  :  called add_key() with wrong args got EXPECTED errno: TEST_ERRNO=EINVAL(22): Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=adjtimex01 stime=1429706450
cmdline="adjtimex01"
contacts=""
analysis=exit
<<<test_output>>>
adjtimex01    1  TPASS  :  adjtimex() with mode 16447 returned 5
adjtimex01    2  TPASS  :  adjtimex() with mode 32769 returned 5
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=adjtimex02 stime=1429706450
cmdline="adjtimex02"
contacts=""
analysis=exit
<<<test_output>>>
adjtimex02    1  TPASS  :  Test Passed, adjtimex() returned -1: TEST_ERRNO=EFAULT(14): Bad address
adjtimex02    2  TPASS  :  Test Passed, adjtimex() returned -1: TEST_ERRNO=EINVAL(22): Invalid argument
adjtimex02    3  TPASS  :  Test Passed, adjtimex() returned -1: TEST_ERRNO=EINVAL(22): Invalid argument
adjtimex02    4  TCONF  :  adjtimex02.c:165: this kernel normalizes buf.offset value if it is outside the acceptable range.
adjtimex02    5  TCONF  :  adjtimex02.c:165: this kernel normalizes buf.offset value if it is outside the acceptable range.
adjtimex02    6  TPASS  :  Test Passed, adjtimex() returned -1: TEST_ERRNO=EPERM(1): Operation not permitted
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=alarm01 stime=1429706450
cmdline="alarm01"
contacts=""
analysis=exit
<<<test_output>>>
alarm01     1  TPASS  :  alarm(1) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=alarm02 stime=1429706450
cmdline="alarm02"
contacts=""
analysis=exit
<<<test_output>>>
alarm02     1  TPASS  :  alarm(18446744073709551615) returned 0 as expected for value -1
alarm02     2  TPASS  :  alarm(18446744073709551615) returned 0 as expected for value ULONG_MAX
alarm02     3  TPASS  :  alarm(0) returned 0 as expected for value ULONG_MAX+1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=alarm03 stime=1429706450
cmdline="alarm03"
contacts=""
analysis=exit
<<<test_output>>>
539: alarm(100), fork, alarm(0) child's alarm returned 0
alarm03     2  TPASS  :  alarm(100), fork, alarm(0) parent's alarm returned 100
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=alarm05 stime=1429706450
cmdline="alarm05"
contacts=""
analysis=exit
<<<test_output>>>
alarm05     1  TPASS  :  Functionality of alarm(5) successful
<<<execution_status>>>
initiation_status="ok"
duration=8 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=alarm06 stime=1429706458
cmdline="alarm06"
contacts=""
analysis=exit
<<<test_output>>>
alarm06     1  TPASS  :  Functionality of alarm(0) successful
<<<execution_status>>>
initiation_status="ok"
duration=15 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=alarm07 stime=1429706473
cmdline="alarm07"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=5 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=asyncio02 stime=1429706478
cmdline="asyncio02"
contacts=""
analysis=exit
<<<test_output>>>
asyncio02    1  TPASS  :  More than BUFSIZE bytes multiple synchronous writes to a file check out ok
asyncio02    2  TPASS  :  BUFSIZE bytes multiple synchronous writes to a file checks out ok
asyncio02    3  TPASS  :  Less than BUFSIZE bytes multiple synchronous writes to a file checks out ok
asyncio02    4  TPASS  :  More than BUFSIZE bytes multiple synchronous writes to a file check out ok
asyncio02    5  TPASS  :  BUFSIZE bytes multiple synchronous writes to a file checks out ok
asyncio02    6  TPASS  :  Less than BUFSIZE bytes multiple synchronous writes to a file checks out ok
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=bind01 stime=1429706478
cmdline="bind01"
contacts=""
analysis=exit
<<<test_output>>>
bind01      1  TPASS  :  invalid sockaddr successful
bind01      2  TPASS  :  invalid salen successful
bind01      3  TPASS  :  invalid socket successful
bind01      4  TPASS  :  INADDR_ANYPORT successful
bind01      5  TPASS  :  UNIX-domain of current directory successful
bind01      6  TPASS  :  non-local address successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=bind02 stime=1429706478
cmdline="bind02"
contacts=""
analysis=exit
<<<test_output>>>
bind02      0  TINFO  :  Defaulting to user nobody
bind02      0  TINFO  :  Socket will try to be bind by user: nobody, group: nogroup
bind02      1  TPASS  :  correct error
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=bdflush01 stime=1429706478
cmdline="bdflush01"
contacts=""
analysis=exit
<<<test_output>>>
bdflush01    2  TCONF  :  bdflush01.c:123: syscall __NR_bdflush not supported on your arch
bdflush01    3  TCONF  :  bdflush01.c:123: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=brk01 stime=1429706478
cmdline="brk01"
contacts=""
analysis=exit
<<<test_output>>>
brk01       1  TPASS  :  brk(38989298) returned 0, new size verified by sbrk
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=capget01 stime=1429706478
cmdline="capget01"
contacts=""
analysis=exit
<<<test_output>>>
capget01    1  TPASS  :  capget() returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=capget02 stime=1429706478
cmdline="capget02"
contacts=""
analysis=e
[   42.255214] capability: warning: `capget01' uses 32-bit capabilities (legacy support in use)
xit
<<<test_output>>>
capget02    1  TPASS  :  capget failed as expected: TEST_ERRNO=EFAULT(14): Bad address
capget02    2  TPASS  :  capget failed as expected: TEST_ERRNO=EFAULT(14): Bad address
capget02    3  TPASS  :  capget failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
capget02    4  TPASS  :  capget failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
capget02    5  TPASS  :  capget failed as expected: TEST_ERRNO=ESRCH(3): No such process
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=capset01 stime=1429706478
cmdline="capset01"
contacts=""
analysis=exit
<<<test_output>>>
capset01    1  TPASS  :  capset() returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=capset02 stime=1429706478
cmdline="capset02"
contacts=""
analysis=exit
<<<test_output>>>
capset02    1  TPASS  :  capset() returned -1, errno: EFAULT
capset02    2  TPASS  :  capset() returned -1, errno: EFAULT
capset02    3  TPASS  :  capset() returned -1, errno: EINVAL
capset02    4  TPASS  :  capset() returned -1, errno: EPERM
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=cacheflush01 stime=1429706478
cmdline="cacheflush01"
contacts=""
analysis=exit
<<<test_output>>>
cacheflush01    1  TCONF  :  cacheflush01.c:139: syscall __NR_cacheflush not supported on your arch
cacheflush01    2  TCONF  :  cacheflush01.c:139: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chdir01 stime=1429706478
cmdline="chdir01"
contacts=""
analysis=exit
<<<test_output>>>
chdir01     0  TINFO  :  Found file .
chdir01     0  TINFO  :  Found file ..
chdir01     0  TINFO  :  Found file chdirtest
chdir01     1  TPASS  :  failed as expected with ENOTDIR
chdir01     2  TPASS  :  failed as expected with ELOOP
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chdir01A stime=1429706478
cmdline="symlink01 -T chdir01"
contacts=""
analysis=exit
<<<test_output>>>
chdir01     1  TPASS  :  chdir(2) to object file location through symbolic link file is ok
chdir01     2  TPASS  :  chdir(2) to non-existent object file location through symbolic link file failed as expected
chdir01     3  TPASS  :  Nested symbolic link access condition caught.  ELOOP is returned
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chdir02 stime=1429706478
cmdline="chdir02"
contacts=""
analysis=exit
<<<test_output>>>
chdir02     1  TPASS  :  chdir(/) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chdir03 stime=1429706478
cmdline="chdir03"
contacts=""
analysis=exit
<<<test_output>>>
got EACCES as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=chdir04 stime=1429706478
cmdline="chdir04"
contacts=""
analysis=exit
<<<test_output>>>
chdir04     1  TPASS  :  failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
chdir04     2  TPASS  :  failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
chdir04     3  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod01 stime=1429706478
cmdline="chmod01"
contacts=""
analysis=exit
<<<test_output>>>
chmod01     1  TPASS  :  Functionality of chmod(testfile, 0) successful
chmod01     2  TPASS  :  Functionality of chmod(testfile, 07) successful
chmod01     3  TPASS  :  Functionality of chmod(testfile, 070) successful
chmod01     4  TPASS  :  Functionality of chmod(testfile, 0700) successful
chmod01     5  TPASS  :  Functionality of chmod(testfile, 0777) successful
chmod01     6  TPASS  :  Functionality of chmod(testfile, 02777) successful
chmod01     7  TPASS  :  Functionality of chmod(testfile, 04777) successful
chmod01     8  TPASS  :  Functionality of chmod(testfile, 06777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod01A stime=1429706478
cmdline="symlink01 -T chmod01"
contacts=""
analysis=exit
<<<test_output>>>
chmod01     1  TPASS  :  chmod(2) of object file permissions through symbolic link file is ok
chmod01     2  TPASS  :  chmod(2) error when accessing non-existent object through symbolic link is caught
chmod01     3  TPASS  :  Nested symbolic link access condition caught.  ELOOP is returned
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod02 stime=1429706478
cmdline="chmod02"
contacts=""
analysis=exit
<<<test_output>>>
chmod02     1  TPASS  :  chmod(test_file, 0) returned 0
chmod02     2  TPASS  :  chmod(test_file, 07) returned 0
chmod02     3  TPASS  :  chmod(test_file, 070) returned 0
chmod02     4  TPASS  :  chmod(test_file, 0700) returned 0
chmod02     5  TPASS  :  chmod(test_file, 0777) returned 0
chmod02     6  TPASS  :  chmod(test_file, 02777) returned 0
chmod02     7  TPASS  :  chmod(test_file, 04777) returned 0
chmod02     8  TPASS  :  chmod(test_file, 06777) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod03 stime=1429706478
cmdline="chmod03"
contacts=""
analysis=exit
<<<test_output>>>
chmod03     1  TPASS  :  Functionality of chmod(testfile, 01777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod04 stime=1429706478
cmdline="chmod04"
contacts=""
analysis=exit
<<<test_output>>>
chmod04     1  TPASS  :  Functionality of chmod(testdir_4, 01777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod05 stime=1429706478
cmdline="chmod05"
contacts=""
analysis=exit
<<<test_output>>>
chmod05     1  TPASS  :  Functionality of chmod(testdir, 043777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod06 stime=1429706478
cmdline="chmod06"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
[   42.313104] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[   42.313339] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
chmod06     0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
chmod06     0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
chmod06     1  TPASS  :  chmod failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
chmod06     2  TPASS  :  chmod failed as expected: TEST_ERRNO=EACCES(13): Permission denied
chmod06     3  TPASS  :  chmod failed as expected: TEST_ERRNO=EFAULT(14): Bad address
chmod06     4  TPASS  :  chmod failed as expected: TEST_ERRNO=EFAULT(14): Bad address
chmod06     5  TPASS  :  chmod failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
chmod06     6  TPASS  :  chmod failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
chmod06     7  TPASS  :  chmod failed as expected: TEST_ERRNO=ENOTDIR(20): Not a directory
chmod06     8  TPASS  :  chmod failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
chmod06     9  TPASS  :  chmod failed as expected: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=chmod07 stime=1429706478
cmdline="chmod07"
contacts=""
analysis=exit
<<<test_output>>>
chmod07     1  TPASS  :  Functionality of chmod(testfile, 01777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown01 stime=1429706478
cmdline="chown01"
contacts=""
analysis=exit
<<<test_output>>>
chown01     1  TPASS  :  chown(t_579, 0,0) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown01_16 stime=1429706478
cmdline="chown01_16"
contacts=""
analysis=exit
<<<test_output>>>
chown01     1  TPASS  :  chown(t_580, 0,0) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown02 stime=1429706478
cmdline="chown02"
contacts=""
analysis=exit
<<<test_output>>>
chown02     1  TPASS  :  chown(testfile1, ..) succeeded
chown02     2  TPASS  :  chown(testfile2, ..) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown02_16 stime=1429706478
cmdline="chown02_16"
contacts=""
analysis=exit
<<<test_output>>>
chown02     1  TPASS  :  chown(testfile1, ..) succeeded
chown02     2  TPASS  :  chown(testfile2, ..) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown03 stime=1429706478
cmdline="chown03"
contacts=""
analysis=exit
<<<test_output>>>
chown03     1  TPASS  :  chown(testfile, ..) was successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown03_16 stime=1429706478
cmdline="chown03_16"
contacts=""
analysis=exit
<<<test_output>>>
chown03     1  TPASS  :  chown(testfile, ..) was successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown04 stime=1429706478
cmdline="chown04"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
[   42.509877] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[   42.510083] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
chown04     0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
chown04     0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
chown04     1  TPASS  :  chown failed: TEST_ERRNO=EPERM(1): Operation not permitted
chown04     2  TPASS  :  chown failed: TEST_ERRNO=EACCES(13): Permission denied
chown04     3  TPASS  :  chown failed: TEST_ERRNO=EFAULT(14): Bad address
chown04     4  TPASS  :  chown failed: TEST_ERRNO=ENAMETOOLONG(36): File name too long
chown04     5  TPASS  :  chown failed: TEST_ERRNO=ENOENT(2): No such file or directory
chown04     6  TPASS  :  chown failed: TEST_ERRNO=ENOTDIR(20): Not a directory
chown04     7  TPASS  :  chown failed: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
chown04     8  TPASS  :  chown failed: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=chown04_16 stime=1429706478
cmdline="chown04_16"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
[   42.616331] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[   42.616620] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
chown04     0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
chown04     0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
chown04     1  TPASS  :  chown failed: TEST_ERRNO=EPERM(1): Operation not permitted
chown04     2  TPASS  :  chown failed: TEST_ERRNO=EACCES(13): Permission denied
chown04     3  TPASS  :  chown failed: TEST_ERRNO=EFAULT(14): Bad address
chown04     4  TPASS  :  chown failed: TEST_ERRNO=ENAMETOOLONG(36): File name too long
chown04     5  TPASS  :  chown failed: TEST_ERRNO=ENOENT(2): No such file or directory
chown04     6  TPASS  :  chown failed: TEST_ERRNO=ENOTDIR(20): Not a directory
chown04     7  TPASS  :  chown failed: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
chown04     8  TPASS  :  chown failed: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown05 stime=1429706478
cmdline="chown05"
contacts=""
analysis=exit
<<<test_output>>>
chown05     1  TPASS  :  chown succeeded
chown05     2  TPASS  :  chown succeeded
chown05     3  TPASS  :  chown succeeded
chown05     4  TPASS  :  chown succeeded
chown05     5  TPASS  :  chown succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown05_16 stime=1429706478
cmdline="chown05_16"
contacts=""
analysis=exit
<<<test_output>>>
chown05     1  TPASS  :  chown succeeded
chown05     2  TPASS  :  chown succeeded
chown05     3  TPASS  :  chown succeeded
chown05     4  TPASS  :  chown succeeded
chown05     5  TPASS  :  chown succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chroot01 stime=1429706478
cmdline="chroot01"
contacts=""
analysis=exit
<<<test_output>>>
chroot01    1  TPASS  :  chroot set errno to EPERM.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chroot02 stime=1429706478
cmdline="chroot02"
contacts=""
analysis=exit
<<<test_output>>>
chroot02    1  TPASS  :  chroot functionality correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chroot03 stime=1429706478
cmdline="chroot03"
contacts=""
analysis=exit
<<<test_output>>>
chroot03    1  TPASS  :  failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
chroot03    2  TPASS  :  failed as expected: TEST_ERRNO=ENOTDIR(20): Not a directory
chroot03    3  TPASS  :  failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
chroot03    4  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
chroot03    5  TPASS  :  failed as expected: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chroot04 stime=1429706478
cmdline="chroot04"
contacts=""
analysis=exit
<<<test_output>>>
chroot04    1  TPASS  :  got EACCESS as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=clock_getres01 stime=1429706478
cmdline="clock_getres01"
contacts=""
analysis=exit
<<<test_output>>>
clock_getres01    1  TPASS  :  clock_getres REALTIME succeeded
clock_getres01    2  TPASS  :  clock_getres MONOTONIC succeeded
clock_getres01    3  TPASS  :  clock_getres PROCESS_CPUTIME_ID succeeded
clock_getres01    4  TPASS  :  clock_getres THREAD_CPUTIME_ID succeeded
clock_getres01    5  TPASS  :  clock_getres REALTIME succeeded
clock_getres01    6  TPASS  :  clock_getres CLOCK_MONOTONIC_RAW succeeded
clock_getres01    7  TPASS  :  clock_getres CLOCK_REALTIME_COARSE succeeded
clock_getres01    8  TPASS  :  clock_getres CLOCK_MONOTONIC_COARSE succeeded
clock_getres01    9  TPASS  :  clock_getres CLOCK_BOOTTIME succeeded
clock_getres01   10  TPASS  :  clock_getres CLOCK_REALTIME_ALARM succeeded
clock_getres01   11  TPASS  :  clock_getres CLOCK_BOOTTIME_ALARM succeeded
clock_getres01   12  TPASS  :  clock_getres -1 succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clock_nanosleep01 stime=1429706478
cmdline="clock_nanosleep01"
contacts=""
analysis=exit
<<<test_output>>>
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=22 errno=0 (Success)
RESULT: return value(ret)=22 errno=0 (Success)
EXPECT: return value(ret)=22 errno=0 (Success)
RESULT: return value(ret)=22 errno=0 (Success)
EXPECT: return value(ret)=22 errno=0 (Success)
RESULT: return value(ret)=22 errno=0 (Success)
EXPECT: return value(ret)=4 errno=0 (Success)
RESULT: return value(ret)=4 errno=0 (Success)
clock_nanosleep01    0  TINFO  :  (case00) START
clock_nanosleep01    0  TINFO  :  check sleep time: (min:480) < 500 < (max:520) (msec)
clock_nanosleep01    0  TINFO  :  remain time: 1 4217117
clock_nanosleep01    0  TINFO  :  (case00) END => OK
clock_nanosleep01    0  TINFO  :  (case01) START
clock_nanosleep01    0  TINFO  :  check sleep time: (min:480) < 500 < (max:520) (msec)
clock_nanosleep01    0  TINFO  :  remain time: 1 4217117
clock_nanosleep01    0  TINFO  :  (case01) END => OK
clock_nanosleep01    0  TINFO  :  (case02) START
clock_nanosleep01    0  TINFO  :  remain time: 1 4217117
clock_nanosleep01    0  TINFO  :  (case02) END => OK
clock_nanosleep01    0  TINFO  :  (case03) START
clock_nanosleep01    0  TINFO  :  remain time: 1 4217117
clock_nanosleep01    0  TINFO  :  (case03) END => OK
clock_nanosleep01    0  TINFO  :  (case04) START
clock_nanosleep01    0  TINFO  :  remain time: 1 4217117
clock_nanosleep01    0  TINFO  :  (case04) END => OK
clock_nanosleep01    0  TINFO  :  (case05) START
clock_nanosleep01    0  TINFO  :  remain time: 9 498109427
clock_nanosleep01    0  TINFO  :  (case05) END => OK
clock_nanosleep01    1  TPASS  :  clock_nanosleep call succeeded
<<<execution_status>>>
initiation_status="ok"
duration=2 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clock_nanosleep2_01 stime=1429706480
cmdline="clock_nanosleep2_01"
contacts=""
analysis=exit
<<<test_output>>>
[   72.865089] ipmi message handler version 39.2
[   72.868714] IPMI Watchdog: driver initialized
clock_nanosleep2_01    0  TINFO  :  Iteration = 0
clock_nanosleep2_01    0  TINFO  :  Iteration = 1
clock_nanosleep2_01    0  TINFO  :  Iteration = 2
clock_nanosleep2_01    0  TINFO  :  Iteration = 3
clock_nanosleep2_01    0  TINFO  :  Iteration = 4
clock_nanosleep2_01    0  TINFO  :  Iteration = 5
clock_nanosleep2_01    0  TINFO  :  Iteration = 6
clock_nanosleep2_01    0  TINFO  :  Iteration = 7
clock_nanosleep2_01    0  TINFO  :  Iteration = 8
clock_nanosleep2_01    0  TINFO  :  Iteration = 9
clock_nanosleep2_01    0  TINFO  :  Iteration = 10
clock_nanosleep2_01    0  TINFO  :  Iteration = 11
clock_nanosleep2_01    0  TINFO  :  Iteration = 12
clock_nanosleep2_01    0  TINFO  :  Iteration = 13
clock_nanosleep2_01    0  TINFO  :  Iteration = 14
clock_nanosleep2_01    0  TINFO  :  Iteration = 15
clock_nanosleep2_01    0  TINFO  :  Iteration = 16
clock_nanosleep2_01    0  TINFO  :  Iteration = 17
clock_nanosleep2_01    0  TINFO  :  Iteration = 18
clock_nanosleep2_01    0  TINFO  :  Iteration = 19
clock_nanosleep2_01    0  TINFO  :  Iteration = 20
clock_nanosleep2_01    0  TINFO  :  Iteration = 21
clock_nanosleep2_01    0  TINFO  :  Iteration = 22
clock_nanosleep2_01    0  TINFO  :  Iteration = 23
clock_nanosleep2_01    0  TINFO  :  Iteration = 24
clock_nanosleep2_01    0  TINFO  :  Iteration = 25
clock_nanosleep2_01    0  TINFO  :  Iteration = 26
clock_nanosleep2_01    0  TINFO  :  Iteration = 27
clock_nanosleep2_01    0  TINFO  :  Iteration = 28
clock_nanosleep2_01    0  TINFO  :  Iteration = 29
clock_nanosleep2_01    0  TINFO  :  Iteration = 30
clock_nanosleep2_01    0  TINFO  :  Iteration = 31
clock_nanosleep2_01    0  TINFO  :  Iteration = 32
clock_nanosleep2_01    0  TINFO  :  Iteration = 33
clock_nanosleep2_01    0  TINFO  :  Iteration = 34
clock_nanosleep2_01    0  TINFO  :  Iteration = 35
clock_nanosleep2_01    0  TINFO  :  Iteration = 36
clock_nanosleep2_01    0  TINFO  :  Iteration = 37
clock_nanosleep2_01    0  TINFO  :  Iteration = 38
clock_nanosleep2_01    0  TINFO  :  Iteration = 39
clock_nanosleep2_01    0  TINFO  :  Iteration = 40
clock_nanosleep2_01    0  TINFO  :  Iteration = 41
clock_nanosleep2_01    0  TINFO  :  Iteration = 42
clock_nanosleep2_01    0  TINFO  :  Iteration = 43
clock_nanosleep2_01    0  TINFO  :  Iteration = 44
clock_nanosleep2_01    0  TINFO  :  Iteration = 45
clock_nanosleep2_01    0  TINFO  :  Iteration = 46
clock_nanosleep2_01    0  TINFO  :  Iteration = 47
clock_nanosleep2_01    0  TINFO  :  Iteration = 48
clock_nanosleep2_01    0  TINFO  :  Iteration = 49
clock_nanosleep2_01    0  TINFO  :  Iteration = 50
clock_nanosleep2_01    1  TPASS  :  clock_nanosleep2() passed
<<<execution_status>>>
initiation_status="ok"
duration=51 termination_type=exited termination_id=0 corefile=no
cutime=2 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone01 stime=1429706531
cmdline="clone01"
contacts=""
analysis=exit
<<<test_output>>>
clone01     1  TPASS  :  clone returned 634
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone02 stime=1429706531
cmdline="clone02"
contacts=""
analysis=exit
<<<test_output>>>
clone02     1  TPASS  :  Test Passed
clone02     1  TPASS  :  Test Passed
clone02     2  TPASS  :  Test Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone03 stime=1429706531
cmdline="clone03"
contacts=""
analysis=exit
<<<test_output>>>
clone03     1  TPASS  :  Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone04 stime=1429706531
cmdline="clone04"
contacts=""
analysis=exit
<<<test_output>>>
clone04     1  TPASS  :  expected failure; Got EINVAL
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone05 stime=1429706531
cmdline="clone05"
contacts=""
analysis=exit
<<<test_output>>>
clone05     1  TPASS  :  Test Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=clone06 stime=1429706531
cmdline="clone06"
contacts=""
analysis=exit
<<<test_output>>>
clone06     1  TPASS  :  Test Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone07 stime=1429706531
cmdline="clone07"
contacts=""
analysis=exit
<<<test_output>>>
clone07     1  TPASS  :  Use of return() in child did not cause SIGSEGV
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone08 stime=1429706531
cmdline="clone08"
contacts=""
analysis=exit
<<<test_output>>>
clone08     0  TINFO  :  running CLONE_PARENT
clone08     1  TPASS  :  test CLONE_PARENT
clone08     0  TINFO  :  running CLONE_CHILD_SETTID
clone08     2  TPASS  :  test CLONE_CHILD_SETTID
clone08     0  TINFO  :  running CLONE_PARENT_SETTID
clone08     3  TPASS  :  test CLONE_PARENT_SETTID
clone08     0  TINFO  :  running CLONE_THREAD
clone08     4  TPASS  :  test CLONE_THREAD
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=close01 stime=1429706531
cmdline="close01"
contacts=""
analysis=exit
<<<test_output>>>
close01     1  TPASS  :  file appears closed
close01     2  TPASS  :  pipe appears closed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=close02 stime=1429706531
cmdline="close02"
contacts=""
analysis=exit
<<<test_output>>>
close02     1  TPASS  :  call returned EBADF
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=close08 stime=1429706531
cmdline="close08"
contacts=""
analysis=exit
<<<test_output>>>
close08     1  TPASS  :  close(tfile_656) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=confstr01 stime=1429706531
cmdline="confstr01"
contacts=""
analysis=exit
<<<test_output>>>
confstr01    1  TPASS  :  confstr PATH = '/bin:/usr/bin'
confstr01    2  TPASS  :  confstr XBS5_ILP32_OFF32_CFLAGS = ''
confstr01    3  TPASS  :  confstr XBS5_ILP32_OFF32_LDFLAGS = ''
confstr01    4  TPASS  :  confstr XBS5_ILP32_OFF32_LIBS = ''
confstr01    5  TPASS  :  confstr XBS5_ILP32_OFF32_LINTFLAGS = ''
confstr01    6  TPASS  :  confstr XBS5_ILP32_OFFBIG_CFLAGS = ''
confstr01    7  TPASS  :  confstr XBS5_ILP32_OFFBIG_LDFLAGS = ''
confstr01    8  TPASS  :  confstr XBS5_ILP32_OFFBIG_LIBS = ''
confstr01    9  TPASS  :  confstr XBS5_ILP32_OFFBIG_LINTFLAGS = ''
confstr01   10  TPASS  :  confstr XBS5_LP64_OFF64_CFLAGS = '-m64'
confstr01   11  TPASS  :  confstr XBS5_LP64_OFF64_LDFLAGS = '-m64'
confstr01   12  TPASS  :  confstr XBS5_LP64_OFF64_LIBS = ''
confstr01   13  TPASS  :  confstr XBS5_LP64_OFF64_LINTFLAGS = ''
confstr01   14  TPASS  :  confstr XBS5_LPBIG_OFFBIG_CFLAGS = ''
confstr01   15  TPASS  :  confstr XBS5_LPBIG_OFFBIG_LDFLAGS = ''
confstr01   16  TPASS  :  confstr XBS5_LPBIG_OFFBIG_LIBS = ''
confstr01   17  TPASS  :  confstr XBS5_LPBIG_OFFBIG_LINTFLAGS = ''
confstr01   18  TPASS  :  confstr GNU_LIBC_VERSION = 'glibc 2.19'
confstr01   19  TPASS  :  confstr GNU_LIBPTHREAD_VERSION = 'NPTL 2.19'
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no

<<<test_end>>>
<<<test_start>>>
tag=connect01 stime=1429706531
cmdline="connect01"
contacts=""
analysis=exit
<<<test_output>>>
connect01    1  TPASS  :  bad file descriptor successful
connect01    2  TPASS  :  invalid socket buffer successful
connect01    3  TPASS  :  invalid salen successful
connect01    4  TPASS  :  invalid socket successful
connect01    5  TPASS  :  already connected successful
connect01    6  TPASS  :  connection refused successful
connect01    7  TPASS  :  invalid address family successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=creat01 stime=1429706531
cmdline="creat01"
contacts=""
analysis=exit
<<<test_output>>>
creat01     1  TPASS  :  file was created and written to successfully
creat01     2  TPASS  :  creat truncated existing file to 0 bytes
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=creat03 stime=1429706531
cmdline="creat03"
contacts=""
analysis=exit
<<<test_output>>>
creat03     0  TINFO  :  Created file has mode = 0100444
creat03     1  TPASS  :  save text bit cleared
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=creat04 stime=1429706531
cmdline="creat04"
contacts=""
analysis=exit
<<<test_output>>>
creat04     1  TPASS  :  call failed with EACCES as expected
creat04     2  TPASS  :  call failed with EACCES as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=creat05 stime=1429706531
cmdline="creat05"
contacts=""
analysis=exit
<<<test_output>>>
creat05     0  TINFO  :  first file is #7
creat05     0  TINFO  :  could not creat file #1025
creat05     1  TPASS  :  call failed with expected error - EMFILE
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_i
[   95.333730] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
d=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=creat06 stime=1429706531
cmdline="creat06"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
creat06     0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
creat06     0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
creat06     1  TPASS  :  got expected failure: TEST_ERRNO=EISDIR(21): Is a directory
creat06     2  TPASS  :  got expected failure: TEST_ERRNO=ENAMETOOLONG(36): File name too long
creat06     3  TPASS  :  got expected failure: TEST_ERRNO=ENOENT(2): No such file or directory
creat06     4  TPASS  :  got expected failure: TEST_ERRNO=ENOTDIR(20): Not a directory
creat06     5  TPASS  :  got expected failure: TEST_ERRNO=EFAULT(14): Bad address
creat06     6  TPASS  :  got expected failure: TEST_ERRNO=EACCES(13): Permission denied
creat06     7  TPASS  :  got expected failure: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
creat06     8  TPASS  :  got expected failure: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=creat07 stime=1429706531
cmdline="creat07"
contacts=""
analysis=exit
<<<test_output>>>
CHILD: Failed to open fifo '': No such file or directory at creat07_child.c:31creat07     1  TBROK  :  tst_checkpoint.c:126: Checkpoint timeouted after 5000 msecs at creat07.c:78
creat07     2  TBROK  :  tst_checkpoint.c:126: Remaining cases broken
<<<execution_status>>>
initiation_status="ok"
duration=5 termination_type=exited termination_id=2 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=creat08 stime=1429706536
cmdline="creat08"
contacts=""
analysis=exit
<<<test_output>>>
creat08     1  TPASS  :  Test passed in block0.
creat08     2  TPASS  :  Test passed in block1.
creat08     3  TPASS  :  Test passed in block2.
creat08     4  TPASS  :  Test passed in block3
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=creat09 stime=1429706536
cmdline="creat09"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup01 stime=1429706536
cmdline="dup01"
contacts=""
analysis=exit
<<<test_output>>>
dup01       1  TPASS  :  dup(dupfile) returned 8
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup02 stime=1429706536
cmdline="dup02"
contacts=""
analysis=exit
<<<test_output>>>
dup02       1  TPASS  :  dup failed as expected with EBADF
dup02       2  TPASS  :  dup failed as expected with EBADF
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup03 stime=1429706536
cmdline="dup03"
contacts=""
analysis=exit
<<<test_output>>>
dup03       1  TPASS  :  dup failed as expected with EMFILE
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup04 stime=1429706536
cmdline="dup04"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup05 stime=1429706536
cmdline="dup05"
contacts=""
analysis=exit
<<<test_output>>>
dup05       1  TPASS  :  dup returned 8
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup06 stime=1429706536
cmdline="dup06"
contacts=""
analysis=exit
<<<test_output>>>
dup06       1  TPASS  :  Test passed.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup07 stime=1429706536
cmdline="dup07"
contacts=""
analysis=exit
<<<test_output>>>
dup07       1  TPASS  :  Passed in read mode.
dup07       2  TPASS  :  Passed in write mode.
dup07       3  TPASS  :  Passed in read/write mode.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup201 stime=1429706536
cmdline="dup201"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup202 stime=1429706536
cmdline="dup202"
contacts=""
analysis=exit
<<<test_output>>>
dup202      1  TPASS  :  fstat shows new and old modes are the same
dup202      2  TPASS  :  fstat shows new and old modes are the same
dup202      3  TPASS  :  fstat shows new and old modes are the same
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=dup203 stime=1429706536
cmdline="dup203"
contacts=""
analysis=exit
<<<test_output>>>
dup203      0  TINFO  :  Enter block 1
dup203      0  TINFO  :  Test duping over an open fd
dup203      1  TPASS  :  dup2 test 1 functionality is correct
dup203      0  TINFO  :  Exit block 1
dup203      0  TINFO  :  Enter block 2
dup203      0  TINFO  :  Test close on exec flag
dup203      2  TPASS  :  dup2 test 2 functionality is correct
dup203      0  TINFO  :  Exit block 2
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup204 stime=1429706536
cmdline="dup204"
contacts=""
analysis=exit
<<<test_output>>>
dup204      1  TPASS  :  original and duped inodes are the same
dup204      2  TPASS  :  original and duped inodes are the same
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup205 stime=1429706536
cmdline="dup205"
contacts=""
analysis=exit
<<<test_output>>>
dup205      1  TPASS  :  Test passed.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup3_01 stime=1429706536
cmdline="dup3_01"
contacts=""
analysis=exit
<<<test_output>>>
dup3_01     1  TPASS  :  dup3(O_CLOEXEC) PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup3_02 stime=1429706536
cmdline="dup3_02"
contacts=""
analysis=exit
<<<test_output>>>
dup3_02     1  TPASS  :  dup3 failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
dup3_02     2  TPASS  :  dup3 failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
dup3_02     3  TPASS  :  dup3 failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=epoll_create1_01 stime=1429706536
cmdline="epoll_create1_01"
contacts=""
analysis=exit
<<<test_output>>>
epoll_create1_01    1  TPASS  :  epoll_create1(EPOLL_CLOEXEC) PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=epoll01 stime=1429706536
cmdline="epoll-ltp"
contacts=""
analysis=exit
<<<test_output>>>
epoll01     0  TINFO  :  testing if epoll() system call works
epoll01     0  TINFO  :  gettimeofday() works
epoll01     0  TINFO  :  random number seeded with gettimeofday() [seed = 402533] works
epoll01     0  TINFO  :  Testing epoll_create
epoll01     1  TPASS  :  epoll_create with negative set size
epoll01     2  TPASS  :  epoll_create with large set size (size = 2147483647)
epoll01     3  TPASS  :  epoll_create with large set size (size = 2147483646)
epoll01     4  TPASS  :  epoll_create with large set size (size = 2147483645)
epoll01     5  TPASS  :  epoll_create with large set size (size = 2147483644)
epoll01     6  TPASS  :  epoll_create with large set size (size = 2147483643)
epoll01     7  TPASS  :  epoll_create with large set size (size = 2147483642)
epoll01     8  TPASS  :  epoll_create with large set size (size = 2147483641)
epoll01     9  TPASS  :  epoll_create with large set size (size = 2147483640)
epoll01    10  TPASS  :  epoll_create with large set size (size = 2147483639)
epoll01    11  TPASS  :  epoll_create with large set size (size = 2147483638)
epoll01    12  TPASS  :  epoll_create with large set size (size = 2147483637)
epoll01    13  TPASS  :  epoll_create with large set size (size = 2147483636)
epoll01    14  TPASS  :  epoll_create with large set size (size = 2147483635)
epoll01    15  TPASS  :  epoll_create with large set size (size = 2147483634)
epoll01    16  TPASS  :  epoll_create with large set size (size = 2147483633)
epoll01    17  TPASS  :  epoll_create with large set size (size = 2147483632)
epoll01    18  TPASS  :  epoll_create with random large set size (size = 1381327164)
epoll01    19  TPASS  :  epoll_create with random large set size (size = 1268687402)
epoll01    20  TPASS  :  epoll_create with random large set size (size = 557299401)
epoll01    21  TPASS  :  epoll_create with random large set size (size = 151493927)
epoll01    22  TPASS  :  epoll_create with random large set size (size = 867582401)
epoll01    23  TPASS  :  epoll_create with random large set size (size = 409579826)
epoll01    24  TPASS  :  epoll_create with random large set size (size = 650921558)
epoll01    25  TPASS  :  epoll_create with random large set size (size = 70102998)
epoll01    26  TPASS  :  epoll_create with random large set size (size = 1786654634)
epoll01    27  TPASS  :  epoll_create with random large set size (size = 1529346341)
epoll01    28  TPASS  :  epoll_create with random large set size (size = 600796124)
epoll01    29  TPASS  :  epoll_create with random large set size (size = 979189369)
epoll01    30  TPASS  :  epoll_create with random large set size (size = 1754065321)
epoll01    31  TPASS  :  epoll_create with random large set size (size = 460332361)
epoll01    32  TPASS  :  epoll_create with random large set size (size = 54114162)
epoll01    33  TPASS  :  epoll_create with random large set size (size = 274471360)
epoll01     0  TINFO  :  Summary: Of 33 tests, epoll_create failed 0 (100% passed).
epoll01     0  TINFO  :  Testing epoll_ctl
epoll01     0  TINFO  :  Summary: Of 13824 tests, epoll_ctl failed 0 (100% passed).
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=4 cstime=159
<<<test_end>>>
<<<test_start>>>
tag=eventfd01 stime=1429706537
cmdline="eventfd01"
contacts=""
analysis=exit
<<<test_output>>>
eventfd01    1  TPASS  :  counter value matches required
eventfd01    2  TPASS  :  read failed with EAGAIN as expected
eventfd01    3  TPASS  :  counter value matches required
eventfd01    4  TPASS  :  write failed with EAGAIN as expected
eventfd01    5  TPASS  :  read failed with EINVAL as expected
eventfd01    6  TPASS  :  write failed with EINVAL as expected
eventfd01    7  TPASS  :  write failed with EINVAL as expected
eventfd01    8  TPASS  :  fd is set in readfds
eventfd01    9  TPASS  :  fd is not set in readfds
eventfd01   10  TPASS  :  fd is set in writefds
eventfd01   11  TPASS  :  fd is not set in writefds
eventfd01    1  TPASS  :  counter value matches required
eventfd01    2  TPASS  :  read failed with EAGAIN as expected
eventfd01    3  TPASS  :  counter value matches required
eventfd01    4  TPASS  :  write failed with EAGAIN as expected
eventfd01    5  TPASS  :  read failed with EINVAL as expected
eventfd01    6  TPASS  :  write failed with EINVAL as expected
eventfd01    7  TPASS  :  write failed with EINVAL as expected
eventfd01    8  TPASS  :  fd is set in readfds
eventfd01    9  TPASS  :  fd is not set in readfds
eventfd01   10  TPASS  :  fd is set in writefds
eventfd01   11  TPASS  :  fd is not set in writefds
eventfd01   12  TPASS  :  counter value write from child successful
eventfd01   13  TCONF  :  eventfd01.c:643: eventfd support is not available in AIO subsystem
eventfd01   14  TCONF  :  eventfd01.c:648: eventfd support is not available in AIO subsystem
eventfd01   15  TCONF  :  eventfd01.c:653: eventfd support is not available in AIO subsystem
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=eventfd2_01 stime=1429706537
cmdline="eventfd2_01"
contacts=""
analysis=exit
<<<test_output>>>
eventfd2_01    1  TPASS  :  eventfd2(EFD_CLOEXEC) Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=eventfd2_02 stime=1429706537
cmdline="eventfd2_02"
contacts=""
analysis=exit
<<<test_output>>>
eventfd2_02    1  TPASS  :  eventfd2(EFD_NONBLOCK) PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=eventfd2_03 stime=1429706537
cmdline="eventfd2_03"
contacts=""
analysis=exit
<<<test_output>>>
[14526] posting 1 on 8
[14526] waiting on 7
[14526] wait completed on 7: count=1
[14526] posting 1 on 8
[14526] waiting on 7
[14526] wait completed on 7: count=1
[14526] posting 5 on 8
[14526] waiting 5 times on 7
[14526] wait completed on 7: count=1
[14526] wait completed on 7: count=1
[14526] wait completed on 7: count=1
[14526] wait completed on 7: count=1
[14526] wait completed on 7: count=1
[14525] posting 1 on 7
[14525] waiting on 8
[14525] wait completed on 8: count=1
[14525] posting 1 on 7
[14525] waiting on 8
[14525] wait completed on 8: count=1
[14525] posting 5 on 7
[14525] waiting 5 times on 8
[14525] wait completed on 8: count=1
[14525] wait completed on 8: count=1
[14525] wait completed on 8: count=1
[14525] wait completed on 8: count=1
[14525] wait completed on 8: count=1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execl01 stime=1429706537
cmdline="execl01"
contacts=""
analysis=exit
<<<test_output>>>
execl01     1  TPASS  :  execl - properly exec's a simple program..
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execle01 stime=1429706537
cmdline="execle01"
contacts=""
analysis=exit
<<<test_output>>>
execle01    1  TPASS  :  execle - properly exec's a simple program..
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execlp01 stime=1429706537
cmdline="execlp01"
contacts=""
analysis=exit
<<<test_output>>>
execlp01    1  TPASS  :  execlp - properly exec's a simple program..
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execv01 stime=1429706537
cmdline="execv01"
contacts=""
analysis=exit
<<<test_output>>>
execv01     1  TPASS  :  execv - properly exec's a simple program..
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=execve01 stime=1429706537
cmdline="execve01"
contacts=""
analysis=exit
<<<test_output>>>
execve01    1  TPASS  :  execve - properly exec's a simple program..
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execve02 stime=1429706537
cmdline="execve02 -F $LTPROOT/testcases/bin/test3"
contacts=""
analysis=exit
<<<test_output>>>
execve failed with EACCES as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execve03 stime=1429706537
cmdline="execve03"
contacts=""
analysis=exit
<<<test_output>>>
execve03    1  TPASS  :  execve failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
execve03    2  TPASS  :  execve failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
execve03    3  TPASS  :  execve failed as expected: TEST_ERRNO=ENOTDIR(20): Not a directory
execve03    4  TPASS  :  execve failed as expected: TEST_ERRNO=EFAULT(14): Bad address
execve03    5  TPASS  :  execve failed as expected: TEST_ERRNO=EACCES(13): Permission denied
execve03    6  TPASS  :  execve failed as expected: TEST_ERRNO=ENOEXEC(8): Exec format error
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execve04 stime=1429706537
cmdline="execve04 -F $LTPROOT/testcases/bin/test3"
contacts=""
analysis=exit
<<<test_output>>>
execve failed with ETXTBSY as expected
execve04    1  TPASS  :  execve failed as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execve05 stime=1429706537
cmdline="execve05 20 $LTPROOT/testcases/bin/execve05 $LTPROOT/testcases/bin/execve05 4"
contacts=""
analysis=exit
<<<test_output>>>
execve05    1  TPASS  :  Test DONE, pid 14548, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14549, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14550, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14551, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14552, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14553, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14554, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14555, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=execvp01 stime=1429706538
cmdline="execvp01"
contacts=""
analysis=exit
<<<test_output>>>
execvp01    1  TPASS  :  execvp - properly exec's a simple program..
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=exit01 stime=1429706538
cmdline="exit01"
contacts=""
analysis=exit
<<<test_output>>>
exit01      1  TPASS  :  exit() test PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=exit02 stime=1429706538
cmdline="exit02"
contacts=""
analysis=exit
<<<test_output>>>
exit02      1  TPASS  :  exit() test PASSED
<<<execution_status>>>
initiation_status="ok"
duration=3 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=exit_group01 stime=1429706541
cmdline="exit_group01"
contacts=""
analysis=exit
<<<test_output>>>
exit_group01    1  TPASS  :  exit_group succeeded
<<<execution_status>>>
initiation_status="ok"
duration=5 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=faccessat01 stime=1429706546
cmdline="faccessat01"
contacts=""
analysis=exit
<<<test_output>>>
faccessat01    1  TPASS  :  faccessat() returned the expected  errno 0: Success
faccessat01    2  TPASS  :  faccessat() returned the expected  errno 0: Success
faccessat01    3  TPASS  :  faccessat() returned the expected  errno 20: Not a directory
faccessat01    4  TPASS  :  faccessat() returned the expected  errno 9: Bad file descriptor
faccessat01    5  TPASS  :  faccessat() returned the expected  errno 0: Success
faccessat01    6  TPASS  :  faccessat() returned the expected  errno 0: Success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fallocate01 stime=1429706546
cmdline="fallocate01"
contacts=""
analysis=exit
<<<test_output>>>
fallocate01    1  TPASS  :  fallocate(7, 0, 49152, 4096) returned 0
fallocate01    2  TPASS  :  write operation on fallocated(7, 0, 49152, 4096) returned 1
fallocate01    3  TPASS  :  fallocate(8, 1, 49152, 4096) returned 0
fallocate01    4  TPASS  :  write operation on fallocated(8, 1, 49152, 4096) returned 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fallocate02 stime=1429706546
cmdline="fallocate02"
contacts=""
analysis=exit
<<<test_output>>>
fallocate02    1  TPASS  :  fallocate(test_file1:7, 1, 0, 1024) returned 9: TEST_ERRNO=EBADF(9): Bad file descriptor
fallocate02    2  TPASS  :  fallocate(test_file2:8, 1, -1024, 1024) returned 22: TEST_ERRNO=EINVAL(22): Invalid argument
fallocate02    3  TPASS  :  fallocate(test_file2:8, 1, 1024, -1024) returned 22: TEST_ERRNO=EINVAL(22): Invalid argument
fallocate02    4  TPASS  :  fallocate(test_file2:8, 1, 12288, 0) returned 22: TEST_ERRNO=EINVAL(22): Invalid argument
fallocate02    5  TPASS  :  fallocate(test_file2:8, 1, 12288, -1
[  110.128527] random: nonblocking pool is initialized
024) returned 22: TEST_ERRNO=EINVAL(22): Invalid argument
fallocate02    6  TPASS  :  fallocate(test_file2:8, 1, -24576, 1024) returned 22: TEST_ERRNO=EINVAL(22): Invalid argument
fallocate02    7  TPASS  :  fallocate(test_file2:8, 1, 9223372036854774784, 1024) returned 27: TEST_ERRNO=EFBIG(27): File too large
fallocate02    8  TPASS  :  fallocate(test_file2:8, 1, 1024, 9223372036854774784) returned 27: TEST_ERRNO=EFBIG(27): File too large
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fallocate03 stime=1429706546
cmdline="fallocate03"
contacts=""
analysis=exit
<<<test_output>>>
fallocate03    1  TPASS  :  fallocate(tfile_sparse_14567, 0, 8192, 4096) returned 0
fallocate03    2  TPASS  :  fallocate(tfile_sparse_14567, 0, 49152, 4096) returned 0
fallocate03    3  TPASS  :  fallocate(tfile_sparse_14567, 0, 69632, 4096) returned 0
fallocate03    4  TPASS  :  fallocate(tfile_sparse_14567, 0, 102400, 4096) returned 0
fallocate03    5  TPASS  :  fallocate(tfile_sparse_14567, 1, 8192, 4096) returned 0
fallocate03    6  TPASS  :  fallocate(tfile_sparse_14567, 1, 49152, 4096) returned 0
fallocate03    7  TPASS  :  fallocate(tfile_sparse_14567, 1, 77824, 4096) returned 0
fallocate03    8  TPASS  :  fallocate(tfile_sparse_14567, 1, 106496, 4096) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise01 stime=1429706546
cmdline="                     posix_fadvise01"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise01    1  TPASS  :  call succeeded expectedly
posix_fadvise01    2  TPASS  :  call succeeded expectedly
posix_fadvise01    3  TPASS  :  call succeeded expectedly
posix_fadvise01    4  TPASS  :  call succeeded expectedly
posix_fadvise01    5  TPASS  :  call succeeded expectedly
posix_fadvise01    6  TPASS  :  call succeeded expectedly
<<<execution_status>>>
initiation_status="ok"
[  110.142458] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem

duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
[  110.142840] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)

tag=posix_fadvise01_64 stime=1429706546
cmdline="               posix_fadvise01_64"
contacts=""
analysis=exit
<<<test_output>>
[  110.142990] EXT4-fs (loop0): re-mounted. Opts: (null)
>
posix_fadvise01_64    1  TPASS  :  call succeeded expectedly
posix_fadvise01_64    2  TPASS  :  call succeeded expectedly
posix_fadvise01_64    3  TPASS  :  call succeeded expectedly
posix_fadvise01_64    4  TPASS  :  call succeeded expectedly
posix_fadvise01_64    5  TPASS  :  call succeeded expectedly
posix_fadvise01_64    6  TPASS  :  call succeeded expectedly
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise02 stime=1429706546
cmdline="                     posix_fadvise02"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise02    1  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02    2  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02    3  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02    4  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02    5  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02    6  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise02_64 stime=1429706546
cmdline="               posix_fadvise02_64"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise02_64    1  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02_64    2  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02_64    3  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02_64    4  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02_64    5  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02_64    6  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise03 stime=1429706546
cmdline="                     posix_fadvise03"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise03    1  TPASS  :  expected failure - returned value = 22, advise = 6 : Invalid argument
posix_fadvise03    2  TPASS  :  expected failure - returned value = 22, advise = 7 : Invalid argument
posix_fadvise03    3  TPASS  :  expected failure - returned value = 22, advise = 8 : Invalid argument
posix_fadvise03    4  TPASS  :  expected failure - returned value = 22, advise = 9 : Invalid argument
posix_fadvise03    5  TPASS  :  expected failure - returned value = 22, advise = 10 : Invalid argument
posix_fadvise03    6  TPASS  :  expected failure - returned value = 22, advise = 11 : Invalid argument
posix_fadvise03    7  TPASS  :  expected failure - returned value = 22, advise = 12 : Invalid argument
posix_fadvise03    8  TPASS  :  expected failure - returned value = 22, advise = 13 : Invalid argument
posix_fadvise03    9  TPASS  :  expected failure - returned value = 22, advise = 14 : Invalid argument
posix_fadvise03   10  TPASS  :  expected failure - returned value = 22, advise = 15 : Invalid argument
posix_fadvise03   11  TPASS  :  expected failure - returned value = 22, advise = 16 : Invalid argument
posix_fadvise03   12  TPASS  :  expected failure - returned value = 22, advise = 17 : Invalid argument
posix_fadvise03   13  TPASS  :  expected failure - returned value = 22, advise = 18 : Invalid argument
posix_fadvise03   14  TPASS  :  expected failure - returned value = 22, advise = 19 : Invalid argument
posix_fadvise03   15  TPASS  :  expected failure - returned value = 22, advise = 20 : Invalid argument
posix_fadvise03   16  TPASS  :  expected failure - returned value = 22, advise = 21 : Invalid argument
posix_fadvise03   17  TPASS  :  expected failure - returned value = 22, advise = 22 : Invalid argument
posix_fadvise03   18  TPASS  :  expected failure - returned value = 22, advise = 23 : Invalid argument
posix_fadvise03   19  TPASS  :  expected failure - returned value = 22, advise = 24 : Invalid argument
posix_fadvise03   20  TPASS  :  expected failure - returned value = 22, advise = 25 : Invalid argument
posix_fadvise03   21  TPASS  :  expected failure - returned value = 22, advise = 26 : Invalid argument
posix_fadvise03   22  TPASS  :  expected failure - returned value = 22, advise = 27 : Invalid argument
posix_fadvise03   23  TPASS  :  expected failure - returned value = 22, advise = 28 : Invalid argument
posix_fadvise03   24  TPASS  :  expected failure - returned value = 22, advise = 29 : Invalid argument
posix_fadvise03   25  TPASS  :  expected failure - returned value = 22, advise = 30 : Invalid argument
posix_fadvise03   26  TPASS  :  expected failure - returned value = 22, advise = 31 : Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise03_64 stime=1429706546
cmdline="               posix_fadvise03_64"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise03_64    1  TPASS  :  expected failure - returned value = 22, advise = 6 : Invalid argument
posix_fadvise03_64    2  TPASS  :  expected failure - returned value = 22, advise = 7 : Invalid argument
posix_fadvise03_64    3  TPASS  :  expected failure - returned value = 22, advise = 8 : Invalid argument
posix_fadvise03_64    4  TPASS  :  expected failure - returned value = 22, advise = 9 : Invalid argument
posix_fadvise03_64    5  TPASS  :  expected failure - returned value = 22, advise = 10 : Invalid argument
posix_fadvise03_64    6  TPASS  :  expected failure - returned value = 22, advise = 11 : Invalid argument
posix_fadvise03_64    7  TPASS  :  expected failure - returned value = 22, advise = 12 : Invalid argument
posix_fadvise03_64    8  TPASS  :  expected failure - returned value = 22, advise = 13 : Invalid argument
posix_fadvise03_64    9  TPASS  :  expected failure - returned value = 22, advise = 14 : Invalid argument
posix_fadvise03_64   10  TPASS  :  expected failure - returned value = 22, advise = 15 : Invalid argument
posix_fadvise03_64   11  TPASS  :  expected failure - returned value = 22, advise = 16 : Invalid argument
posix_fadvise03_64   12  TPASS  :  expected failure - returned value = 22, advise = 17 : Invalid argument
posix_fadvise03_64   13  TPASS  :  expected failure - returned value = 22, advise = 18 : Invalid argument
posix_fadvise03_64   14  TPASS  :  expected failure - returned value = 22, advise = 19 : Invalid argument
posix_fadvise03_64   15  TPASS  :  expected failure - returned value = 22, advise = 20 : Invalid argument
posix_fadvise03_64   16  TPASS  :  expected failure - returned value = 22, advise = 21 : Invalid argument
posix_fadvise03_64   17  TPASS  :  expected failure - returned value = 22, advise = 22 : Invalid argument
posix_fadvise03_64   18  TPASS  :  expected failure - returned value = 22, advise = 23 : Invalid argument
posix_fadvise03_64   19  TPASS  :  expected failure - returned value = 22, advise = 24 : Invalid argument
posix_fadvise03_64   20  TPASS  :  expected failure - returned value = 22, advise = 25 : Invalid argument
posix_fadvise03_64   21  TPASS  :  expected failure - returned value = 22, advise = 26 : Invalid argument
posix_fadvise03_64   22  TPASS  :  expected failure - returned value = 22, advise = 27 : Invalid argument
posix_fadvise03_64   23  TPASS  :  expected failure - returned value = 22, advise = 28 : Invalid argument
posix_fadvise03_64   24  TPASS  :  expected failure - returned value = 22, advise = 29 : Invalid argument
posix_fadvise03_64   25  TPASS  :  expected failure - returned value = 22, advise = 30 : Invalid argument
posix_fadvise03_64   26  TPASS  :  expected failure - returned value = 22, advise = 31 : Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise04 stime=1429706546
cmdline="                     posix_fadvise04"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise04    1  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04    2  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04    3  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04    4  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04    5  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04    6  TPASS  :  expected failure - returned value = 29 : Illegal seek
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise04_64 stime=1429706546
cmdline="               posix_fadvise04_64"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise04_64    1  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04_64    2  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04_64    3  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04_64    4  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04_64    5  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04_64    6  TPASS  :  expected failure - returned value = 29 : Illegal seek
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchdir01 stime=1429706546
cmdline="fchdir01"
contacts=""
analysis=exit
<<<test_output>>>
fchdir01    1  TPASS  :  fchdir call succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchdir02 stime=1429706546
cmdline="fchdir02"
contacts=""
analysis=exit
<<<test_output>>>
fchdir02    1  TPASS  :  failed as expected with EBADF
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchdir03 stime=1429706546
cmdline="fchdir03"
contacts=""
analysis=exit
<<<test_output>>>
Got EACCES as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmod01 stime=1429706546
cmdline="fchmod01"
contacts=""
analysis=exit
<<<test_output>>>
fchmod01    1  TPASS  :  fchmod(tfile_14580, 0700) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmod02 stime=1429706546
cmdline="fchmod02"
contacts=""
analysis=exit
<<<test_output>>>
fchmod02    1  TPASS  :  Functionality of fchmod(7, 01777) Successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmod03 stime=1429706546
cmdline="fchmod03"
contacts=""
analysis=exit
<<<test_output>>>
fchmod03    1  TPASS  :  Functionality of fchmod(7, 01777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmod04 stime=1429706546
cmdline="fchmod04"
contacts=""
analysis=exit
<<<test_output>>>
fchmod04    1  TPASS  :  Functionality of fchmod(7, 01777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmod05 stime=1429706546
cmdline="fchmod05"
contacts=""
analysis=exit
<<<test_output>>>
fchmod05    1  TPASS  :  Functionality of fchmod(7, 041777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fchmod06 stime=1429706546
cmdline="fchmod06"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
fchmod06    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
fchmod06    0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
fchmod06    1  TPASS  :  fchmod: test EPERM success: TEST_ERRNO=EPERM(1): Operation not permitted
fchmod06    2  TPASS  :  fchmod: test EBADF success: TEST_ERRNO=EBADF(9): Bad file descriptor
fchmod06    3  TPASS  :  fchmod: test EROFS success: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmod07 stime=1429706546
cmdline="fchmod07"
contacts=""
analysis=exit
<<<test_output>>>
fchmod07    1  TPASS  :  Functionality of fchmod(7, 0) successful
fchmod07    2  TPASS  :  Functionality of fchmod(7, 07) successful
fchmod07    3  TPASS  :  Functionality of fchmod(7, 070) successful
fchmod07    4  TPASS  :  Functionality of fchmod(7, 0700) successful
fchmod07    5  TPASS  :  Functionality of fchmod(7, 0777) successful
fchmod07    6  TPASS  :  Functionality of fchmod(7, 02777) successful
fchmod07    7  TPASS  :  Functionality of fchmod(7, 04777) successful
fchmod07    8  TPASS  :  Functionality of fchmod(7, 06777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmodat01 stime=1429706546
cmdline="fchmodat01"
contacts=""
analysis=exit
<<<test_output>>>
fchmodat01    1  TPASS  :  fchmodat() returned the expected  errno 0: Success
fchmodat01    2  TPASS  :  fchmodat() returned the expected  errno 0: Success
fchmodat01    3  TPASS  :  fchmodat() returned the expected  errno 20: Not a directory
fchmodat01    4  TPASS  :  fchmodat() returned the expected  errno 9: Bad file descriptor
fchmodat01    5  TPASS  :  fchmodat() returned the expected  errno 0: Success
fchmodat01    6  TPASS  :  fchmodat() returned the expected  errno 0: Success
<<<execution_status>>>
[  110.248420] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem

initiation_status="ok"
duration=0 termination_type=exit
[  110.248764] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
ed termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
[  110.248923] EXT4-fs (loop0): re-mounted. Opts: (null)

tag=fchown01 stime=1429706546
cmdline="fchown01"
contacts=""
analysis=exit
<<<test_output>>>
fchown01    1  TPASS  :  fchown(fd, geteuid(), getegid()) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown01_16 stime=1429706546
cmdline="fchown01_16"
contacts=""
analysis=exit
<<<test_output>>>
fchown01    1  TPASS  :  fchown(fd, geteuid(), getegid()) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown02 stime=1429706546
cmdline="fchown02"
contacts=""
analysis=exit
<<<test_output>>>
fchown02    1  TPASS  :  fchown() on testfile1 succeeds : Setuid/Setgid bits cleared
fchown02    2  TPASS  :  fchown() on testfile2 succeeds : Setgid bit not cleared
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown02_16 stime=1429706546
cmdline="fchown02_16"
contacts=""
analysis=exit
<<<test_output>>>
fchown02    1  TPASS  :  fchown() on testfile1 succeeds : Setuid/Setgid bits cleared
fchown02    2  TPASS  :  fchown() on testfile2 succeeds : Setgid bit not cleared
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown03 stime=1429706546
cmdline="fchown03"
contacts=""
analysis=exit
<<<test_output>>>
fchown03    1  TPASS  :  fchown() on testfile succeeds: Setuid/gid bits cleared
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown03_16 stime=1429706546
cmdline="fchown03_16"
contacts=""
analysis=exit
<<<test_output>>>
fchown03    1  TPASS  :  fchown() on testfile succeeds: Setuid/gid bits cleared
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown04 stime=1429706546
cmdline="fchown04"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
fchown04    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
fchown04    0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
fchown04    1  TPASS  :  fchown failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
fchown04    2  TPASS  :  fchown failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
fchown04    3  TPASS  :  fchown failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fchown04_16 stime=1429706546
cmdline="fchown04_16"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
[  110.417090] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  110.417322] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
[  110.418753] EXT4-fs (loop0): re-mounted. Opts: (null)
fchown04    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
fchown04    0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
fchown04    1  TPASS  :  fchown failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
fchown04    2  TPASS  :  fchown failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
fchown04    3  TPASS  :  fchown failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown05 stime=1429706546
cmdline="fchown05"
contacts=""
analysis=exit
<<<test_output>>>
fchown05    1  TPASS  :  fchown() succeeds to Change Owner/Group ids of testfile
fchown05    2  TPASS  :  fchown() succeeds to Change Owner id only of testfile
fchown05    3  TPASS  :  fchown() succeeds to Change Owner id only of testfile
fchown05    4  TPASS  :  fchown() succeeds to Change Group id only of testfile
fchown05    5  TPASS  :  fchown() succeeds to Change Group id only of testfile
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown05_16 stime=1429706546
cmdline="fchown05_16"
contacts=""
analysis=exit
<<<test_output>>>
fchown05    1  TPASS  :  fchown() succeeds to Change Owner/Group ids of testfile
fchown05    2  TPASS  :  fchown() succeeds to Change Owner id only of testfile
fchown05    3  TPASS  :  fchown() succeeds to Change Owner id only of testfile
fchown05    4  TPASS  :  fchown() succeeds to Change Group id only of testfile
fchown05    5  TPASS  :  fchown() succeeds to Change Group id only of testfile
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchownat01 stime=1429706546
cmdline="fchownat01"
contacts=""
analysis=exit
<<<test_output>>>
fchownat01    1  TPASS  :  fchownat() returned the expected errno 0: Success: TEST_ERRNO=SUCCESS(0): Success
fchownat01    2  TPASS  :  fchownat() returned the expected errno -1: Not a directory: TEST_ERRNO=ENOTDIR(20): Not a directory
fchownat01    3  TPASS  :  fchownat() returned the expected errno -1: Bad file descriptor: TEST_ERRNO=EBADF(9): Bad file descriptor
fchownat01    4  TPASS  :  fchownat() returned the expected errno -1: Invalid argument: TEST_ERRNO=EINVAL(22): Invalid argument
fchownat01    5  TPASS  :  fchownat() returned the expected errno 0: Success: TEST_ERRNO=SUCCESS(0): Success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchownat02 stime=1429706546
cmdline="fchownat02"
contacts=""
analysis=exit
<<<test_output>>>
fchownat02    1  TPASS  :  fchownat() test AT_SYMLINK_NOFOLLOW success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl01 stime=1429706546
cmdline="fcntl01"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl01_64 stime=1429706546
cmdline="fcntl01_64"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl02 stime=1429706546
cmdline="fcntl02"
contacts=""
analysis=exit
<<<test_output>>>
fcntl02     1  TPASS  :  fcntl(tfile_14609, F_DUPFD, 0) returned 8
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl02_64 stime=1429706546
cmdline="fcntl02_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl02     1  TPASS  :  fcntl(tfile_14610, F_DUPFD, 0) returned 8
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl03 stime=1429706546
cmdline="fcntl03"
contacts=""
analysis=exit
<<<test_output>>>
fcntl03     1  TPASS  :  fcntl(tfile_14611, F_GETFD, 0) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl03_64 stime=1429706546
cmdline="fcntl03_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl03     1  TPASS  :  fcntl(tfile_14612, F_GETFD, 0) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl04 stime=1429706546
cmdline="fcntl04"
contacts=""
analysis=exit
<<<test_output>>>
fcntl04     1  TPASS  :  fcntl returned 32770
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl04_64 stime=1429706546
cmdline="fcntl04_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl04     1  TPASS  :  fcntl returned 32770
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl05 stime=1429706546
cmdline="fcntl05"
contacts=""
analysis=exit
<<<test_output>>>
fcntl05     1  TPASS  :  fcntl returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl05_64 stime=1429706546
cmdline="fcntl05_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl05     1  TPASS  :  fcntl returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl06 stime=1429706546
cmdline="fcntl06"
contacts=""
analysis=exit
<<<test_output>>>
fcntl06     1  TCONF  :  fcntl06.c:113: system doesn't have LINUX_LOCK_FILE_REGION support
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl06_64 stime=1429706546
cmdline="fcntl06_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl06     1  TCONF  :  fcntl06.c:113: system doesn't have LINUX_LOCK_FILE_REGION support
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl07 stime=1429706546
cmdline="fcntl07"
contacts=""
analysis=exit
<<<test_output>>>
fcntl07     1  TPASS  :  regular file CLOEXEC fd was closed after exec()
fcntl07     2  TPASS  :  pipe (write end) CLOEXEC fd was closed after exec()
fcntl07     3  TPASS  :  pipe (read end) CLOEXEC fd was closed after exec()
fcntl07     4  TPASS  :  fifo CLOEXEC fd was closed after exec()
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl07_64 stime=1429706546
cmdline="fcntl07_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl07     1  TPASS  :  regular file CLOEXEC fd was closed after exec()
fcntl07     2  TPASS  :  pipe (write end) CLOEXEC fd was closed after exec()
fcntl07     3  TPASS  :  pipe (read end) CLOEXEC fd was closed after exec()
fcntl07     4  TPASS  :  fifo CLOEXEC fd was closed after exec()
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl08 stime=1429706546
cmdline="fcntl08"
contacts=""
analysis=exit
<<<test_output>>>
fcntl08     1  TPASS  :  fcntl returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl08_64 stime=1429706546
cmdline="fcntl08_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl08     1  TPASS  :  fcntl returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl09 stime=1429706546
cmdline="fcntl09"
contacts=""
analysis=exit
<<<test_output>>>
fcntl09     1  TPASS  :  fcntl(./file_14631, F_SETLK, &flocks) flocks.l_type = F_WRLCK returned 0
fcntl09     2  TPASS  :  fcntl(./file_14631, F_SETLK, &flocks) flocks.l_type = F_UNLCK returned 0
fcntl09     1  TPASS  :  fcntl(./file_14631, F_SETLK, &flocks) flocks.l_type = F_RDLCK returned 0
fcntl09     2  TPASS  :  fcntl(./file_14631, F_SETLK, &flocks) flocks.l_type = F_UNLCK returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl09_64 stime=1429706546
cmdline="fcntl09_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl09     1  TPASS  :  fcntl(./file_14632, F_SETLK, &flocks) flocks.l_type = F_WRLCK returned 0
fcntl09     2  TPASS  :  fcntl(./file_14632, F_SETLK, &flocks) flocks.l_type = F_UNLCK returned 0
fcntl09     1  TPASS  :  fcntl(./file_14632, F_SETLK, &flocks) flocks.l_type = F_RDLCK returned 0
fcntl09     2  TPASS  :  fcntl(./file_14632, F_SETLK, &flocks) flocks.l_type = F_UNLCK returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl10 stime=1429706546
cmdline="fcntl10"
contacts=""
analysis=exit
<<<test_output>>>
fcntl10     1  TPASS  :  fcntl(tfile_14633, F_SETLKW, &flocks) flocks.l_type = F_WRLCK returned 0
fcntl10     2  TPASS  :  fcntl(tfile_14633, F_SETLKW, &flocks) flocks.l_type = F_UNLCK returned 0
fcntl10     1  TPASS  :  fcntl(tfile_14633, F_SETLKW, &flocks) flocks.l_type = F_RDLCK returned 0
fcntl10     2  TPASS  :  fcntl(tfile_14633, F_SETLKW, &flocks) flocks.l_type = F_UNLCK returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl10_64 stime=1429706546
cmdline="fcntl10_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl10     1  TPASS  :  fcntl(tfile_14634, F_SETLKW, &flocks) flocks.l_type = F_WRLCK returned 0
fcntl10     2  TPASS  :  fcntl(tfile_14634, F_SETLKW, &flocks) flocks.l_type = F_UNLCK returned 0
fcntl10     1  TPASS  :  fcntl(tfile_14634, F_SETLKW, &flocks) flocks.l_type = F_RDLCK returned 0
fcntl10     2  TPASS  :  fcntl(tfile_14634, F_SETLKW, &flocks) flocks.l_type = F_UNLCK returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl11 stime=1429706546
cmdline="fcntl11"
contacts=""
analysis=exit
<<<test_output>>>
fcntl11     0  TINFO  :  Enter block 1
fcntl11     0  TINFO  :  Exit block 1
fcntl11     0  TINFO  :  Enter block 2
fcntl11     0  TINFO  :  Exit block 2
fcntl11     0  TINFO  :  Enter block 3
fcntl11     0  TINFO  :  Exit block 3
fcntl11     0  TINFO  :  Enter block 4
fcntl11     0  TINFO  :  Exit block 4
fcntl11     0  TINFO  :  Enter block 5
fcntl11     0  TINFO  :  Exit block 5
fcntl11     0  TINFO  :  Enter block 6
fcntl11     0  TINFO  :  Exit block 6
fcntl11     0  TINFO  :  Enter block 7
fcntl11     0  TINFO  :  Exit block 7
fcntl11     0  TINFO  :  Enter block 8
fcntl11     0  TINFO  :  Exit block 8
fcntl11     0  TINFO  :  Enter block 9
fcntl11     0  TINFO  :  Exit block 9
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl11_64 stime=1429706546
cmdline="fcntl11_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl11     0  TINFO  :  Enter block 1
fcntl11     0  TINFO  :  Exit block 1
fcntl11     0  TINFO  :  Enter block 2
fcntl11     0  TINFO  :  Exit block 2
fcntl11     0  TINFO  :  Enter block 3
fcntl11     0  TINFO  :  Exit block 3
fcntl11     0  TINFO  :  Enter block 4
fcntl11     0  TINFO  :  Exit block 4
fcntl11     0  TINFO  :  Enter block 5
fcntl11     0  TINFO  :  Exit block 5
fcntl11     0  TINFO  :  Enter block 6
fcntl11     0  TINFO  :  Exit block 6
fcntl11     0  TINFO  :  Enter block 7
fcntl11     0  TINFO  :  Exit block 7
fcntl11     0  TINFO  :  Enter block 8
fcntl11     0  TINFO  :  Exit block 8
fcntl11     0  TINFO  :  Enter block 9
fcntl11     0  TINFO  :  Exit block 9
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl12 stime=1429706546
cmdline="fcntl12"
contacts=""
analysis=exit
<<<test_output>>>
fcntl12     0  TINFO  :  Enter block 1
fcntl12     0  TINFO  :  Test for errno EMFILE
fcntl12     0  TINFO  :  block 1 PASSED
fcntl12     0  TINFO  :  Exit block 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl12_64 stime=1429706546
cmdline="fcntl12_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl12     0  TINFO  :  Enter block 1
fcntl12     0  TINFO  :  Test for errno EMFILE
fcntl12     0  TINFO  :  block 1 PASSED
fcntl12     0  TINFO  :  Exit block 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl13 stime=1429706546
cmdline="fcntl13"
contacts=""
analysis=exit
<<<test_output>>>
fcntl13     0  TINFO  :  Enter block 1
fcntl13     0  TINFO  :  Test for errno EINVAL
fcntl13     0  TINFO  :  block 1 PASSED
fcntl13     0  TINFO  :  Exit block 1
fcntl13     0  TINFO  :  Enter block 2
fcntl13     0  TINFO  :  Test for errno EFAULT
fcntl13     0  TINFO  :  block 2 PASSED
fcntl13     0  TINFO  :  Exit block 2
fcntl13     0  TINFO  :  Enter block 3
fcntl13     0  TINFO  :  Test for errno EINVAL
fcntl13     0  TINFO  :  block 3 PASSED
fcntl13     0  TINFO  :  Exit block 3
fcntl13     0  TINFO  :  Enter block 4
fcntl13     0  TINFO  :  Test for errno EBADF
fcntl13     0  TINFO  :  block 4 PASSED
fcntl13     0  TINFO  :  Exit block 4
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl13_64 stime=1429706546
cmdline="fcntl13_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl13     0  TINFO  :  Enter block 1
fcntl13     0  TINFO  :  Test for errno EINVAL
fcntl13     0  TINFO  :  block 1 PASSED
fcntl13     0  TINFO  :  Exit block 1
fcntl13     0  TINFO  :  Enter block 2
fcntl13     0  TINFO  :  Test for errno EFAULT
fcntl13     0  TINFO  :  block 2 PASSED
fcntl13     0  TINFO  :  Exit block 2
fcntl13     0  TINFO  :  Enter block 3
fcntl13     0  TINFO  :  Test for errno EINVAL
fcntl13     0  TINFO  :  block 3 PASSED
fcntl13     0  TINFO  :  Exit block 3
fcntl13     0  TINFO  :  Enter block 4
fcntl13     0  TINFO  :  Test for errno EBADF
fcntl13     0  TINFO  :  block 4 PASSED
fcntl13     0  TINFO  :  Exit block 4
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl14 stime=1429706546
cmdline="fcntl14"
contacts=""
analysis=exit
<<<test_output>>>
fcntl14     0  TINFO  :  Enter block 1: without mandatory locking
fcntl14     1  TPASS  :  testcase:1 PASSED
fcntl14     2  TPASS  :  testcase:2 PASSED
fcntl14     3  TPASS  :  testcase:3 PASSED
fcntl14     4  TPASS  :  testcase:4 PASSED
fcntl14     5  TPASS  :  testcase:5 PASSED
fcntl14     6  TPASS  :  testcase:6 PASSED
fcntl14     7  TPASS  :  testcase:7 PASSED
fcntl14     8  TPASS  :  testcase:8 PASSED
fcntl14     9  TPASS  :  testcase:9 PASSED
fcntl14    10  TPASS  :  testcase:10 PASSED
fcntl14    11  TPASS  :  testcase:11 PASSED
fcntl14    12  TPASS  :  testcase:12 PASSED
fcntl14    13  TPASS  :  testcase:13 PASSED
fcntl14    14  TPASS  :  testcase:14 PASSED
fcntl14    15  TPASS  :  testcase:15 PASSED
fcntl14    16  TPASS  :  testcase:16 PASSED
fcntl14    17  TPASS  :  testcase:17 PASSED
fcntl14    18  TPASS  :  testcase:18 PASSED
fcntl14    19  TPASS  :  testcase:19 PASSED
fcntl14    20  TPASS  :  testcase:20 PASSED
fcntl14    21  TPASS  :  testcase:21 PASSED
fcntl14    22  TPASS  :  testcase:22 PASSED
fcntl14    23  TPASS  :  testcase:23 PASSED
fcntl14    24  TPASS  :  testcase:24 PASSED
fcntl14    25  TPASS  :  testcase:25 PASSED
fcntl14    26  TPASS  :  testcase:26 PASSED
fcntl14    27  TPASS  :  testcase:27 PASSED
fcntl14    28  TPASS  :  testcase:28 PASSED
fcntl14    29  TPASS  :  testcase:29 PASSED
fcntl14    30  TPASS  :  testcase:30 PASSED
fcntl14    31  TPASS  :  testcase:31 PASSED
fcntl14    32  TPASS  :  testcase:32 PASSED
fcntl14    33  TPASS  :  testcase:33 PASSED
fcntl14    34  TPASS  :  testcase:34 PASSED
fcntl14    35  TPASS  :  testcase:35 PASSED
fcntl14    36  TPASS  :  testcase:36 PASSED
fcntl14    37  TPASS  :  Block 1, test 1 PASSED
fcntl14    38  TPASS  :  testcase:37 PASSED
fcntl14    39  TPASS  :  testcase:38 PASSED
fcntl14    40  TPASS  :  testcase:39 PASSED
fcntl14    41  TPASS  :  testcase:40 PASSED
fcntl14    42  TPASS  :  testcase:41 PASSED
fcntl14    43  TPASS  :  testcase:42 PASSED
fcntl14    44  TPASS  :  testcase:43 PASSED
fcntl14    45  TPASS  :  testcase:44 PASSED
fcntl14    46  TPASS  :  testcase:45 PASSED
fcntl14    47  TPASS  :  Block 1, test 2 PASSED
fcntl14     0  TINFO  :  Exit block 1
fcntl14     0  TINFO  :  Enter block 2: with mandatory locking
fcntl14    48  TPASS  :  testcase:1 PASSED
fcntl14    49  TPASS  :  testcase:2 PASSED
fcntl14    50  TPASS  :  testcase:3 PASSED
fcntl14    51  TPASS  :  testcase:4 PASSED
fcntl14    52  TPASS  :  testcase:5 PASSED
fcntl14    53  TPASS  :  testcase:6 PASSED
fcntl14    54  TPASS  :  testcase:7 PASSED
fcntl14    55  TPASS  :  testcase:8 PASSED
fcntl14    56  TPASS  :  testcase:9 PASSED
fcntl14    57  TPASS  :  testcase:10 PASSED
fcntl14    58  TPASS  :  testcase:11 PASSED
fcntl14    59  TPASS  :  testcase:12 PASSED
fcntl14    60  TPASS  :  testcase:13 PASSED
fcntl14    61  TPASS  :  testcase:14 PASSED
fcntl14    62  TPASS  :  testcase:15 PASSED
fcntl14    63  TPASS  :  testcase:16 PASSED
fcntl14    64  TPASS  :  testcase:17 PASSED
fcntl14    65  TPASS  :  testcase:18 PASSED
fcntl14    66  TPASS  :  testcase:19 PASSED
fcntl14    67  TPASS  :  testcase:20 PASSED
fcntl14    68  TPASS  :  testcase:21 PASSED
fcntl14    69  TPASS  :  testcase:22 PASSED
fcntl14    70  TPASS  :  testcase:23 PASSED
fcntl14    71  TPASS  :  testcase:24 PASSED
fcntl14    72  TPASS  :  testcase:25 PASSED
fcntl14    73  TPASS  :  testcase:26 PASSED
fcntl14    74  TPASS  :  testcase:27 PASSED
fcntl14    75  TPASS  :  testcase:28 PASSED
fcntl14    76  TPASS  :  testcase:29 PASSED
fcntl14    77  TPASS  :  testcase:30 PASSED
fcntl14    78  TPASS  :  testcase:31 PASSED
fcntl14    79  TPASS  :  testcase:32 PASSED
fcntl14    80  TPASS  :  testcase:33 PASSED
fcntl14    81  TPASS  :  testcase:34 PASSED
fcntl14    82  TPASS  :  testcase:35 PASSED
fcntl14    83  TPASS  :  testcase:36 PASSED
fcntl14    84  TPASS  :  Block 2, test 1 PASSED
fcntl14    85  TPASS  :  testcase:37 PASSED
fcntl14    86  TPASS  :  testcase:38 PASSED
fcntl14    87  TPASS  :  testcase:39 PASSED
fcntl14    88  TPASS  :  testcase:40 PASSED
fcntl14    89  TPASS  :  testcase:41 PASSED
fcntl14    90  TPASS  :  testcase:42 PASSED
fcntl14    91  TPASS  :  testcase:43 PASSED
fcntl14    92  TPASS  :  testcase:44 PASSED
fcntl14    93  TPASS  :  testcase:45 PASSED
fcntl14    94  TPASS  :  Block 2, test 2 PASSED
fcntl14     0  TINFO  :  Exit block 2
fcntl14     0  TINFO  :  Enter block 3
fcntl14    95  TPASS  :  Test with negative whence locking PASSED
fcntl14     0  TINFO  :  Exit block 3
fcntl14     0  TINFO  :  Enter block 4
fcntl14    96  TPASS  :  Test of locks on file PASSED
fcntl14     0  TINFO  :  Exit block 4
<<<execution_status>>>
initiation_status="ok"
duration=5 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=fcntl14_64 stime=1429706551
cmdline="fcntl14_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl14     0  TINFO  :  Enter block 1: without mandatory locking
fcntl14     1  TPASS  :  testcase:1 PASSED
fcntl14     2  TPASS  :  testcase:2 PASSED
fcntl14     3  TPASS  :  testcase:3 PASSED
fcntl14     4  TPASS  :  testcase:4 PASSED
fcntl14     5  TPASS  :  testcase:5 PASSED
fcntl14     6  TPASS  :  testcase:6 PASSED
fcntl14     7  TPASS  :  testcase:7 PASSED
fcntl14     8  TPASS  :  testcase:8 PASSED
fcntl14     9  TPASS  :  testcase:9 PASSED
fcntl14    10  TPASS  :  testcase:10 PASSED
fcntl14    11  TPASS  :  testcase:11 PASSED
fcntl14    12  TPASS  :  testcase:12 PASSED
fcntl14    13  TPASS  :  testcase:13 PASSED
fcntl14    14  TPASS  :  testcase:14 PASSED
fcntl14    15  TPASS  :  testcase:15 PASSED
fcntl14    16  TPASS  :  testcase:16 PASSED
fcntl14    17  TPASS  :  testcase:17 PASSED
fcntl14    18  TPASS  :  testcase:18 PASSED
fcntl14    19  TPASS  :  testcase:19 PASSED
fcntl14    20  TPASS  :  testcase:20 PASSED
fcntl14    21  TPASS  :  testcase:21 PASSED
fcntl14    22  TPASS  :  testcase:22 PASSED
fcntl14    23  TPASS  :  testcase:23 PASSED
fcntl14    24  TPASS  :  testcase:24 PASSED
fcntl14    25  TPASS  :  testcase:25 PASSED
fcntl14    26  TPASS  :  testcase:26 PASSED
fcntl14    27  TPASS  :  testcase:27 PASSED
fcntl14    28  TPASS  :  testcase:28 PASSED
fcntl14    29  TPASS  :  testcase:29 PASSED
fcntl14    30  TPASS  :  testcase:30 PASSED
fcntl14    31  TPASS  :  testcase:31 PASSED
fcntl14    32  TPASS  :  testcase:32 PASSED
fcntl14    33  TPASS  :  testcase:33 PASSED
fcntl14    34  TPASS  :  testcase:34 PASSED
fcntl14    35  TPASS  :  testcase:35 PASSED
fcntl14    36  TPASS  :  testcase:36 PASSED
fcntl14    37  TPASS  :  Block 1, test 1 PASSED
fcntl14    38  TPASS  :  testcase:37 PASSED
fcntl14    39  TPASS  :  testcase:38 PASSED
fcntl14    40  TPASS  :  testcase:39 PASSED
fcntl14    41  TPASS  :  testcase:40 PASSED
fcntl14    42  TPASS  :  testcase:41 PASSED
fcntl14    43  TPASS  :  testcase:42 PASSED
fcntl14    44  TPASS  :  testcase:43 PASSED
fcntl14    45  TPASS  :  testcase:44 PASSED
fcntl14    46  TPASS  :  testcase:45 PASSED
fcntl14    47  TPASS  :  Block 1, test 2 PASSED
fcntl14     0  TINFO  :  Exit block 1
fcntl14     0  TINFO  :  Enter block 2: with mandatory locking
fcntl14    48  TPASS  :  testcase:1 PASSED
fcntl14    49  TPASS  :  testcase:2 PASSED
fcntl14    50  TPASS  :  testcase:3 PASSED
fcntl14    51  TPASS  :  testcase:4 PASSED
fcntl14    52  TPASS  :  testcase:5 PASSED
fcntl14    53  TPASS  :  testcase:6 PASSED
fcntl14    54  TPASS  :  testcase:7 PASSED
fcntl14    55  TPASS  :  testcase:8 PASSED
fcntl14    56  TPASS  :  testcase:9 PASSED
fcntl14    57  TPASS  :  testcase:10 PASSED
fcntl14    58  TPASS  :  testcase:11 PASSED
fcntl14    59  TPASS  :  testcase:12 PASSED
fcntl14    60  TPASS  :  testcase:13 PASSED
fcntl14    61  TPASS  :  testcase:14 PASSED
fcntl14    62  TPASS  :  testcase:15 PASSED
fcntl14    63  TPASS  :  testcase:16 PASSED
fcntl14    64  TPASS  :  testcase:17 PASSED
fcntl14    65  TPASS  :  testcase:18 PASSED
fcntl14    66  TPASS  :  testcase:19 PASSED
fcntl14    67  TPASS  :  testcase:20 PASSED
fcntl14    68  TPASS  :  testcase:21 PASSED
fcntl14    69  TPASS  :  testcase:22 PASSED
fcntl14    70  TPASS  :  testcase:23 PASSED
fcntl14    71  TPASS  :  testcase:24 PASSED
fcntl14    72  TPASS  :  testcase:25 PASSED
fcntl14    73  TPASS  :  testcase:26 PASSED
fcntl14    74  TPASS  :  testcase:27 PASSED
fcntl14    75  TPASS  :  testcase:28 PASSED
fcntl14    76  TPASS  :  testcase:29 PASSED
fcntl14    77  TPASS  :  testcase:30 PASSED
fcntl14    78  TPASS  :  testcase:31 PASSED
fcntl14    79  TPASS  :  testcase:32 PASSED
fcntl14    80  TPASS  :  testcase:33 PASSED
fcntl14    81  TPASS  :  testcase:34 PASSED
fcntl14    82  TPASS  :  testcase:35 PASSED
fcntl14    83  TPASS  :  testcase:36 PASSED
fcntl14    84  TPASS  :  Block 2, test 1 PASSED
fcntl14    85  TPASS  :  testcase:37 PASSED
fcntl14    86  TPASS  :  testcase:38 PASSED
fcntl14    87  TPASS  :  testcase:39 PASSED
fcntl14    88  TPASS  :  testcase:40 PASSED
fcntl14    89  TPASS  :  testcase:41 PASSED
fcntl14    90  TPASS  :  testcase:42 PASSED
fcntl14    91  TPASS  :  testcase:43 PASSED
fcntl14    92  TPASS  :  testcase:44 PASSED
fcntl14    93  TPASS  :  testcase:45 PASSED
fcntl14    94  TPASS  :  Block 2, test 2 PASSED
fcntl14     0  TINFO  :  Exit block 2
fcntl14     0  TINFO  :  Enter block 3
fcntl14    95  TPASS  :  Test with negative whence locking PASSED
fcntl14     0  TINFO  :  Exit block 3
fcntl14     0  TINFO  :  Enter block 4
fcntl14    96  TPASS  :  Test of locks on file PASSED
fcntl14     0  TINFO  :  Exit block 4
<<<execution_status>>>
initiation_status="ok"
duration=6 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=fcntl15 stime=1429706557
cmdline="fcntl15"
contacts=""
analysis=exit
<<<test_output>>>
fcntl15     0  TINFO  :  Entering block 1
fcntl15     0  TINFO  :  Test 1: test with "dup" PASSED
fcntl15     0  TINFO  :  Exiting block 1
fcntl15     0  TINFO  :  Entering block 2
fcntl15     0  TINFO  :  Failed to record test working dir
fcntl15     0  TINFO  :  Test 2: test with "open" PASSED
fcntl15     0  TINFO  :  Exiting block 2
fcntl15     0  TINFO  :  Entering block 3
fcntl15     0  TINFO  :  Failed to record test working dir
fcntl15     0  TINFO  :  Test 3: test with "fork" PASSED
fcntl15     0  TINFO  :  Exiting block 3
<<<execution_status>>>
initiation_status="ok"
duration=10 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl15_64 stime=1429706567
cmdline="fcntl15_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl15     0  TINFO  :  Entering block 1
fcntl15     0  TINFO  :  Test 1: test with "dup" PASSED
fcntl15     0  TINFO  :  Exiting block 1
fcntl15     0  TINFO  :  Entering block 2
fcntl15     0  TINFO  :  Failed to record test working dir
fcntl15     0  TINFO  :  Test 2: test with "open" PASSED
fcntl15     0  TINFO  :  Exiting block 2
fcntl15     0  TINFO  :  Entering block 3
fcntl15     0  TINFO  :  Failed to record test working dir
fcntl15     0  TINFO  :  Test 3: test with "fork" PASSED
fcntl15     0  TINFO  :  Exiting block 3
<<<execution_status>>>
initiation_status="ok"
duration=10 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl16 stime=1429706577
cmdline="fcntl16"
contacts=""
analysis=exit
<<<test_output>>>
fcntl16     0  TINFO  :  Entering block 1
fcntl16     0  TINFO  :  Test case 1: without manadatory locking PASSED
fcntl16     0  TINFO  :  Exiting block 1
fcntl16     0  TINFO  :  Entering block 2
fcntl16     0  TINFO  :  Test case 2: with mandatory record locking PASSED
fcntl16     0  TINFO  :  Exiting block 2
fcntl16     0  TINFO  :  Entering block 3
fcntl16     0  TINFO  :  Test case 3: mandatory locking with NODELAY PASSED
fcntl16     0  TINFO  :  Exiting block 3
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl16_64 stime=1429706577
cmdline="fcntl16_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl16     0  TINFO  :  Entering block 1
fcntl16     0  TINFO  :  Test case 1: without manadatory locking PASSED
fcntl16     0  TINFO  :  Exiting block 1
fcntl16     0  TINFO  :  Entering block 2
fcntl16     0  TINFO  :  Test case 2: with mandatory record locking PASSED
fcntl16     0  TINFO  :  Exiting block 2
fcntl16     0  TINFO  :  Entering block 3
fcntl16     0  TINFO  :  Test case 3: mandatory locking with NODELAY PASSED
fcntl16     0  TINFO  :  Exiting block 3
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl17 stime=1429706577
cmdline="fcntl17"
contacts=""
analysis=exit
<<<test_output>>>
fcntl17     0  TINFO  :  Enter preparation phase
fcntl17     0  TINFO  :  child 3 starting
fcntl17     0  TINFO  :  child 3 pid 14962 locked
fcntl17     0  TINFO  :  child 3 resuming
fcntl17     0  TINFO  :  child 3 lockw err 35
fcntl17     0  TINFO  :  child 3 exiting
fcntl17     0  TINFO  :  child 1 starting
fcntl17     0  TINFO  :  child 1 pid 14960 locked
fcntl17     0  TINFO  :  child 1 resuming
fcntl17     0  TINFO  :  child 1 unlocked
fcntl17     0  TINFO  :  child 1 exiting
fcntl17     0  TINFO  :  child 2 starting
fcntl17     0  TINFO  :  child 2 pid 14961 locked
fcntl17     0  TINFO  :  child 2 resuming
fcntl17     0  TINFO  :  child 2 lockw locked
fcntl17     0  TINFO  :  child 2 exiting
fcntl17     0  TINFO  :  Exit preparation phase
fcntl17     0  TINFO  :  Enter block 1
fcntl17     0  TINFO  :  Block 1 PASSED
fcntl17     0  TINFO  :  Exit block 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl17_64 stime=1429706577
cmdline="fcntl17_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl17     0  TINFO  :  Enter preparation phase
fcntl17     0  TINFO  :  child 3 starting
fcntl17     0  TINFO  :  child 3 pid 14966 locked
fcntl17     0  TINFO  :  child 3 resuming
fcntl17     0  TINFO  :  child 3 lockw err 35
fcntl17     0  TINFO  :  child 3 exiting
fcntl17     0  TINFO  :  child 1 starting
fcntl17     0  TINFO  :  child 1 pid 14964 locked
fcntl17     0  TINFO  :  child 1 resuming
fcntl17     0  TINFO  :  child 1 unlocked
fcntl17     0  TINFO  :  child 1 exiting
fcntl17     0  TINFO  :  child 2 starting
fcntl17     0  TINFO  :  child 2 pid 14965 locked
fcntl17     0  TINFO  :  child 2 resuming
fcntl17     0  TINFO  :  child 2 lockw locked
fcntl17     0  TINFO  :  child 2 exiting
fcntl17     0  TINFO  :  Exit preparation phase
fcntl17     0  TINFO  :  Enter block 1
fcntl17     0  TINFO  :  Block 1 PASSED
fcntl17     0  TINFO  :  Exit block 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl18 stime=1429706577
cmdline="fcntl18"
contacts=""
analysis=exit
<<<test_output>>>
fcntl18     0  TINFO  :  Enter block 1
fcntl18     1  TPASS  :  Test F_GETLK: for errno EFAULT PASSED
fcntl18     0  TINFO  :  Block 1 PASSED
fcntl18     0  TINFO  :  Exit block 1
fcntl18     0  TINFO  :  Enter block 2
fcntl18     2  TPASS  :  Test F_GETLK64: for errno EFAULT PASSED
fcntl18     0  TINFO  :  Block 2 PASSED
fcntl18     0  TINFO  :  Exit block 2
fcntl18     0  TINFO  :  Enter block 3
fcntl18     3  TPASS  :  Test for errno EINVAL PASSED
fcntl18     0  TINFO  :  Block 3 PASSED
fcntl18     0  TINFO  :  Exit block 3
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl18_64 stime=1429706577
cmdline="fcntl18_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl18     0  TINFO  :  Enter block 1
fcntl18     1  TPASS  :  Test F_GETLK: for errno EFAULT PASSED
fcntl18     0  TINFO  :  Block 1 PASSED
fcntl18     0  TINFO  :  Exit block 1
fcntl18     0  TINFO  :  Enter block 2
fcntl18     2  TPASS  :  Test F_GETLK64: for errno EFAULT PASSED
fcntl18     0  TINFO  :  Block 2 PASSED
fcntl18     0  TINFO  :  Exit block 2
fcntl18     0  TINFO  :  Enter block 3
fcntl18     3  TPASS  :  Test for errno EINVAL PASSED
fcntl18     0  TINFO  :  Block 3 PASSED
fcntl18     0  TINFO  :  Exit block 3
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl19 stime=1429706577
cmdline="fcntl19"
contacts=""
analysis=exit
<<<test_output>>>
fcntl19     0  TINFO  :  Enter block 1
fcntl19     0  TINFO  :  Test block 1: PASSED
fcntl19     0  TINFO  :  Exit block 1
fcntl19     0  TINFO  :  Enter block 2
fcntl19     0  TINFO  :  Test block 2: PASSED
fcntl19     0  TINFO  :  Exit block 2
fcntl19     0  TINFO  :  Enter block 3
fcntl19     0  TINFO  :  Test block 3: PASSED
fcntl19     0  TINFO  :  Exit block 3
fcntl19     0  TINFO  :  Enter blcok 4
fcntl19     0  TINFO  :  Test block 4: PASSED
fcntl19     0  TINFO  :  Exit block 4
fcntl19     0  TINFO  :  Enter block 5
fcntl19     0  TINFO  :  Test block 5: PASSED
fcntl19     0  TINFO  :  Exit block 5
fcntl19     0  TINFO  :  Enter block 6
fcntl19     0  TINFO  :  Test block 6: PASSED
fcntl19     0  TINFO  :  Exit block 6
fcntl19     0  TINFO  :  Enter block 7
fcntl19     0  TINFO  :  Test block 7: PASSED
fcntl19     0  TINFO  :  Exit block 7
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl19_64 stime=1429706577
cmdline="fcntl19_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl19     0  TINFO  :  Enter block 1
fcntl19     0  TINFO  :  Test block 1: PASSED
fcntl19     0  TINFO  :  Exit block 1
fcntl19     0  TINFO  :  Enter block 2
fcntl19     0  TINFO  :  Test block 2: PASSED
fcntl19     0  TINFO  :  Exit block 2
fcntl19     0  TINFO  :  Enter block 3
fcntl19     0  TINFO  :  Test block 3: PASSED
fcntl19     0  TINFO  :  Exit block 3
fcntl19     0  TINFO  :  Enter blcok 4
fcntl19     0  TINFO  :  Test block 4: PASSED
fcntl19     0  TINFO  :  Exit block 4
fcntl19     0  TINFO  :  Enter block 5
fcntl19     0  TINFO  :  Test block 5: PASSED
fcntl19     0  TINFO  :  Exit block 5
fcntl19     0  TINFO  :  Enter block 6
fcntl19     0  TINFO  :  Test block 6: PASSED
fcntl19     0  TINFO  :  Exit block 6
fcntl19     0  TINFO  :  Enter block 7
fcntl19     0  TINFO  :  Test block 7: PASSED
fcntl19     0  TINFO  :  Exit block 7
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl20 stime=1429706577
cmdline="fcntl20"
contacts=""
analysis=exit
<<<test_output>>>
fcntl20     0  TINFO  :  Enter block 1
fcntl20     0  TINFO  :  Test block 1: PASSED
fcntl20     0  TINFO  :  Exit block 1
fcntl20     0  TINFO  :  Enter block 2
fcntl20     0  TINFO  :  Test block 2: PASSED
fcntl20     0  TINFO  :  Exit block 2
fcntl20     0  TINFO  :  Enter block 3
fcntl20     0  TINFO  :  Test block 3: PASSED
fcntl20     0  TINFO  :  Exit block 3
fcntl20     0  TINFO  :  Enter blcok 4
fcntl20     0  TINFO  :  Test block 4: PASSED
fcntl20     0  TINFO  :  Exit block 4
fcntl20     0  TINFO  :  Enter block 5
fcntl20     0  TINFO  :  Test block 5: PASSED
fcntl20     0  TINFO  :  Exit block 5
fcntl20     0  TINFO  :  Enter block 6
fcntl20     0  TINFO  :  Test block 6: PASSED
fcntl20     0  TINFO  :  Exit block 6
fcntl20     0  TINFO  :  Enter block 7
fcntl20     0  TINFO  :  Test block 7: PASSED
fcntl20     0  TINFO  :  Exit block 7
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl20_64 stime=1429706577
cmdline="fcntl20_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl20     0  TINFO  :  Enter block 1
fcntl20     0  TINFO  :  Test block 1: PASSED
fcntl20     0  TINFO  :  Exit block 1
fcntl20     0  TINFO  :  Enter block 2
fcntl20     0  TINFO  :  Test block 2: PASSED
fcntl20     0  TINFO  :  Exit block 2
fcntl20     0  TINFO  :  Enter block 3
fcntl20     0  TINFO  :  Test block 3: PASSED
fcntl20     0  TINFO  :  Exit block 3
fcntl20     0  TINFO  :  Enter blcok 4
fcntl20     0  TINFO  :  Test block 4: PASSED
fcntl20     0  TINFO  :  Exit block 4
fcntl20     0  TINFO  :  Enter block 5
fcntl20     0  TINFO  :  Test block 5: PASSED
fcntl20     0  TINFO  :  Exit block 5
fcntl20     0  TINFO  :  Enter block 6
fcntl20     0  TINFO  :  Test block 6: PASSED
fcntl20     0  TINFO  :  Exit block 6
fcntl20     0  TINFO  :  Enter block 7
fcntl20     0  TINFO  :  Test block 7: PASSED
fcntl20     0  TINFO  :  Exit block 7
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl21 stime=1429706577
cmdline="fcntl21"
contacts=""
analysis=exit
<<<test_output>>>
fcntl21     0  TINFO  :  Enter block 1
fcntl21     0  TINFO  :  Test block 1: PASSED
fcntl21     0  TINFO  :  Exit block 1
fcntl21     0  TINFO  :  Enter block 2
fcntl21     0  TINFO  :  Test block 2: PASSED
fcntl21     0  TINFO  :  Exit block 2
fcntl21     0  TINFO  :  Enter block 3
fcntl21     0  TINFO  :  Test block 3 : PASSED
fcntl21     0  TINFO  :  Exit block 3
fcntl21     0  TINFO  :  Enter block 4
fcntl21     0  TINFO  :  Test block 4: PASSED
fcntl21     0  TINFO  :  Exit block 4
fcntl21     0  TINFO  :  Enter block 5
fcntl21     0  TINFO  :  Test block 5: PASSED
fcntl21     0  TINFO  :  Exit block 5
fcntl21     0  TINFO  :  Enter block 6
fcntl21     0  TINFO  :  Test block 6 PASSED
fcntl21     0  TINFO  :  Exit block 6
fcntl21     0  TINFO  :  Enter block 7
fcntl21     0  TINFO  :  Test block 7: PASSED
fcntl21     0  TINFO  :  Exit block 7
fcntl21     0  TINFO  :  Enter block 8
fcntl21     0  TINFO  :  Test block 8: PASSED
fcntl21     0  TINFO  :  Exit block 8
fcntl21     0  TINFO  :  Enter block 9
fcntl21     0  TINFO  :  Test block 9: PASSED
fcntl21     0  TINFO  :  Exit block 9
fcntl21     0  TINFO  :  Enter block 10
fcntl21     0  TINFO  :  Test block 10: PASSED
fcntl21     0  TINFO  :  Exit block 10
fcntl21     0  TINFO  :  Enter block 11
fcntl21     0  TINFO  :  Test block 11: PASSED
fcntl21     0  TINFO  :  Exit block 11
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl21_64 stime=1429706577
cmdline="fcntl21_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl21     0  TINFO  :  Enter block 1
fcntl21     0  TINFO  :  Test block 1: PASSED
fcntl21     0  TINFO  :  Exit block 1
fcntl21     0  TINFO  :  Enter block 2
fcntl21     0  TINFO  :  Test block 2: PASSED
fcntl21     0  TINFO  :  Exit block 2
fcntl21     0  TINFO  :  Enter block 3
fcntl21     0  TINFO  :  Test block 3 : PASSED
fcntl21     0  TINFO  :  Exit block 3
fcntl21     0  TINFO  :  Enter block 4
fcntl21     0  TINFO  :  Test block 4: PASSED
fcntl21     0  TINFO  :  Exit block 4
fcntl21     0  TINFO  :  Enter block 5
fcntl21     0  TINFO  :  Test block 5: PASSED
fcntl21     0  TINFO  :  Exit block 5
fcntl21     0  TINFO  :  Enter block 6
fcntl21     0  TINFO  :  Test block 6 PASSED
fcntl21     0  TINFO  :  Exit block 6
fcntl21     0  TINFO  :  Enter block 7
fcntl21     0  TINFO  :  Test block 7: PASSED
fcntl21     0  TINFO  :  Exit block 7
fcntl21     0  TINFO  :  Enter block 8
fcntl21     0  TINFO  :  Test block 8: PASSED
fcntl21     0  TINFO  :  Exit block 8
fcntl21     0  TINFO  :  Enter block 9
fcntl21     0  TINFO  :  Test block 9: PASSED
fcntl21     0  TINFO  :  Exit block 9
fcntl21     0  TINFO  :  Enter block 10
fcntl21     0  TINFO  :  Test block 10: PASSED
fcntl21     0  TINFO  :  Exit block 10
fcntl21     0  TINFO  :  Enter block 11
fcntl21     0  TINFO  :  Test block 11: PASSED
fcntl21     0  TINFO  :  Exit block 11
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl22 stime=1429706577
cmdline="fcntl22"
contacts=""
analysis=exit
<<<test_output>>>
fcntl22     1  TPASS  :  fcntl() fails with expected error EAGAIN errno:11
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl22_64 stime=1429706577
cmdline="fcntl22_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl22     1  TPASS  :  fcntl() fails with expected error EAGAIN errno:11
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl23 stime=1429706577
cmdline="fcntl23"
contacts=""
analysis=exit
<<<test_output>>>
fcntl23     1  TPASS  :  fcntl(tfile_14987, F_SETLEASE, F_RDLCK)
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl23_64 stime=1429706577
cmdline="fcntl23_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl23     1  TPASS  :  fcntl(tfile_14988, F_SETLEASE, F_RDLCK)
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl24 stime=1429706577
cmdline="fcntl24"
contacts=""
analysis=exit
<<<test_output>>>
fcntl24     1  TCONF  :  fcntl24.c:133: Cannot do fcntl on a file on TMPFS filesystem
fcntl24     2  TCONF  :  fcntl24.c:133: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl24_64 stime=1429706577
cmdline="fcntl24_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl24     1  TCONF  :  fcntl24.c:133: Cannot do fcntl on a file on TMPFS filesystem
fcntl24     2  TCONF  :  fcntl24.c:133: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl25 stime=1429706577
cmdline="fcntl25"
contacts=""
analysis=exit
<<<test_output>>>
fcntl25     1  TCONF  :  fcntl25.c:134: Cannot do fcntl on a file on TMPFS filesystem
fcntl25     2  TCONF  :  fcntl25.c:134: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl25_64 stime=1429706577
cmdline="fcntl25_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl25     1  TCONF  :  fcntl25.c:134: Cannot do fcntl on a file on TMPFS filesystem
fcntl25     2  TCONF  :  fcntl25.c:134: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl26 stime=1429706577
cmdline="fcntl26"
contacts=""
analysis=exit
<<<test_output>>>
fcntl26     1  TCONF  :  fcntl26.c:134: Cannot do fcntl on a file on TMPFS filesystem
fcntl26     2  TCONF  :  fcntl26.c:134: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl26_64 stime=1429706577
cmdline="fcntl26_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl26     1  TCONF  :  fcntl26.c:134: Cannot do fcntl on a file on TMPFS filesystem
fcntl26     2  TCONF  :  fcntl26.c:134: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl27 stime=1429706577
cmdline="fcntl27"
contacts=""
analysis=exit
<<<test_output>>>
fcntl27     1  TPASS  :  fcntl(fd, F_SETLEASE, F_RDLCK) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl27_64 stime=1429706577
cmdline="fcntl27_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl27     1  TPASS  :  fcntl(fd, F_SETLEASE, F_RDLCK) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl28 stime=1429706577
cmdline="fcntl28"
contacts=""
analysis=exit
<<<test_output>>>
fcntl28     1  TPASS  :  fcntl(fd, F_SETLEASE, F_RDLCK) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl28_64 stime=1429706577
cmdline="fcntl28_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl28     1  TPASS  :  fcntl(fd, F_SETLEASE, F_RDLCK) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl29 stime=1429706577
cmdline="fcntl29"
contacts=""
analysis=exit
<<<test_output>>>
fcntl29     1  TPASS  :  fcntl test F_DUPFD_CLOEXEC success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl29_64 stime=1429706577
cmdline="fcntl29_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl29     1  TPASS  :  fcntl test F_DUPFD_CLOEXEC success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl30 stime=1429706577
cmdline="fcntl30"
contacts=""
analysis=exit
<<<test_output>>>
fcntl30     0  TINFO  :  orig_pipe_size: 65536 new_pipe_size: 131072
fcntl30     1  TPASS  :  fcntl test F_GETPIPE_SZand F_SETPIPE_SZ success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl30_64 stime=1429706577
cmdline="fcntl30_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl30     0  TINFO  :  orig_pipe_size: 65536 new_pipe_size: 131072
fcntl30     1  TPASS  :  fcntl test F_GETPIPE_SZand F_SETPIPE_SZ success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl31 stime=1429706577
cmdline="fcntl31"
contacts=""
analysis=exit
<<<test_output>>>
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     1  TPASS  :  fcntl test F_GETOWN, F_SETOWN for process ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     2  TPASS  :  fcntl test F_GETOWN, F_SETOWN for process group ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     3  TPASS  :  fcntl test F_GETOWN_EX, F_SETOWN_EX for thread ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     4  TPASS  :  fcntl test F_GETOWN_EX, F_SETOWN_EX for process ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     5  TPASS  :  fcntl test F_GETOWN_EX, F_SETOWN_EX for process group ID success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl31_64 stime=1429706577
cmdline="fcntl31_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     1  TPASS  :  fcntl test F_GETOWN, F_SETOWN for process ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     2  TPASS  :  fcntl test F_GETOWN, F_SETOWN for process group ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     3  TPASS  :  fcntl test F_GETOWN_EX, F_SETOWN_EX for thread ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     4  TPASS  :  fcntl test F_GETOWN_EX, F_SETOWN_EX for process ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     5  TPASS  :  fcntl test F_GETOWN_EX, F_SETOWN_EX for process group ID success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fdatasync01 stime=1429706577
cmdline="fdatasync01"
contacts=""
analysis=exit
<<<test_output>>>
fdatasync01    1  TPASS  :  fdatasync() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fdatasync02 stime=1429706577
cmdline="fdatasync02"
contacts=""
analysis=exit
<<<test_output>>>
fdatasync02    1  TPASS  :  Expected failure for invalid file descriptor, errno: 9
fdatasync02    2  TPASS  :  Expected failure for file descriptor to a special file, errno: 22
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=flock01 stime=1429706577
cmdline="flock01"
contacts=""
analysis=exit
<<<test_output>>>
flock01     1  TPASS  :  flock() succeeded with Shared Lock, returned error number=0
flock01     2  TPASS  :  flock() succeeded with Unlock, returned error number=0
flock01     3  TPASS  :  flock() succeeded with Exclusive Lock, returned error number=0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=flock02 stime=1429706577
cmdline="flock02"
contacts=""
analysis=exit
<<<test_output>>>
flock02     1  TPASS  :  flock failed as expected with EBADF
flock02     2  TPASS  :  flock failed as expected with EINVAL
flock02     3  TPASS  :  flock failed as expected with EINVAL
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=flock03 stime=1429706577
cmdline="flock03"
contacts=""
analysis=exit
<<<test_output>>>
CHILD: File locked by parent unlocked
CHILD: Locking after unlock passed
flock03     1  TPASS  :  Parent: Initial attempt to flock() passed
flock03     2  TPASS  :  flock03 Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=flock04 stime=1429706577
cmdline="flock04"
contacts=""
analysis=exit
<<<test_output>>>
flock04     1  TPASS  :  flock() PASSED in acquiring shared lock on Share Locked file
flock04     1  TPASS  :  flock() failed to acquire exclusive lock on existing share locked file as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=flock05 stime=1429706577
cmdline="flock05"
contacts=""
analysis=exit
<<<test_output>>>
flock05     1  TPASS  :  flock() failed to acquire shared lock on an alreadyexclusive locked file as expected
flock05     1  TPASS  :  flock() failed to acquire exclusive lock on existing  exclusive locked file as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=flock06 stime=1429706577
cmdline="flock06"
contacts=""
analysis=exit
<<<test_output>>>
flock06     1  TPASS  :  First attempt to flock() passed
flock06     2  TPASS  :  Second attempt to flock() denied
flock06     3  TPASS  :  Unlocked fd1
flock06     4  TPASS  :  Third attempt to flock() succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fmtmsg01 stime=1429706577
cmdline="fmtmsg01"
contacts=""
analysis=exit
<<<test_output>>>
fmtms01     1  TPASS  :  Test passed
fmtms01     2  TPASS  :  Test passed
fmtms01     3  TPASS  :  Test passed
fmtms01     4  TPASS  :  Test passed
fmtms01     5  TPASS  :  Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fork01 stime=1429706577
cmdline="fork01"
contacts=""
analysis=exit
<<<test_output>>>
fork01      1  TPASS  :  fork() returned 15030
fork01      2  TPASS  :  child pid and fork() return agree: 15030
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fork02 stime=1429706577
cmdline="fork02"
contacts=""
analysis=exit
<<<test_output>>>
fork02      0  TINFO  :  Inside parent
fork02      0  TINFO  :  exit status of wait 0
fork02      1  TPASS  :  test 1 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fork03 stime=1429706577
cmdline="fork03"
contacts=""
analysis=exit
<<<test_output>>>
fork03      0  TINFO  :  process id in parent of child from fork : 15034
fork03      1  TPASS  :  test 1 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fork04 stime=1429706577
cmdline="fork04"
contacts=""
analysis=exit
<<<test_output>>>
fork04      1  TPASS  :  Env var TERM unchanged after fork(): getenv() does not find variable set
fork04      2  TPASS  :  Env var NoTSetzWq unchanged after fork(): getenv() does not find variable set
fork04      3  TPASS  :  Env var TESTPROG unchanged after fork(): FRKTCS04
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fork05 stime=1429706577
cmdline="fork05"
contacts=""
analysis=exit
<<<test_output>>>
fork05      0  TINFO  :  %fs test only for ix86
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fork06 stime=1429706577
cmdline="fork06"
contacts=""
analysis=exit
<<<test_output>>>
fork06      0  TINFO  :  tries 1000
fork06      0  TINFO  :  successes 1000
fork06      0  TINFO  :  failures 0
fork06      0  TINFO  :  There were no children to wait for
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=10
<<<test_end>>>
<<<test_start>>>
tag=fork07 stime=1429706577
cmdline="fork07"
contacts=""
analysis=exit
<<<test_output>>>
fork07      0  TINFO  :  Forking 100 children
fork07      0  TINFO  :  Forked all 100 children, now collecting
fork07      0  TINFO  :  Collected all 100 children
fork07      1  TPASS  :  100/100 children read correctly from an inheritted fd
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=2
<<<test_end>>>
<<<test_start>>>
tag=fork08 stime=1429706578
cmdline="fork08"
contacts=""
analysis=exit
<<<test_output>>>
fork08      0  TINFO  :  parent forksval: 1
fork08      0  TINFO  :  second child got char: b
fork08      1  TPASS  :  Test passed in childnumber 2
fork08      0  TINFO  :  parent forksval: 1
fork08      0  TINFO  :  parent forksval: 2
fork08      0  TINFO  :  exit status of wait  expected 0 got 0
fork08      1  TPASS  :  parent test PASSED
fork08      0  TINFO  :  exit status of wait  expected 0 got 0
fork08      2  TPASS  :  parent test PASSED
fork08      0  TINFO  :  exit status of wait  expected 0 got 0
fork08      3  TPASS  :  parent test PASSED
fork08      0  TINFO  :  Number of processes forked is 2
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fork09 stime=1429706579
cmdline="fork09"
contacts=""
analysis=exit
<<<test_output>>>
fork09      0  TINFO  :  OPEN_MAX is 1024
fork09      0  TINFO  :  first file descriptor is 7 
fork09      0  TINFO  :  Parent reporting 1023 files open
fork09      0  TINFO  :  Child opened new file #1023
fork09      0  TINFO  :  OPEN_MAX is 1024
fork09      0  TINFO  :  first file descriptor is 7 
fork09      0  TINFO  :  Parent reporting 1023 files open
fork09      1  TPASS  :  test 1 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fork10 stime=1429706579
cmdline="fork10"
contacts=""
analysis=exit
<<<test_output>>>
fork10      0  TINFO  :  fork child A
fork10      1  TPASS  :  test 1 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fork11 stime=1429706579
cmdline="fork11"
contacts=""
analysis=exit
<<<test_output>>>
fork11      1  TPASS  :  fork test passed, 100 processes
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fork13 stime=1429706579
cmdline="fork13 -i 1000000"
contacts=""
analysis=exit
<<<test_output>>>
fork13      1  TPASS  :  1000000 pids forked, all passed
<<<execution_status>>>
initiation_status="ok"
duration=116 termination_type=exited termination_id=0 corefile=no
cutime=433 cstime=11984
<<<test_end>>>
<<<test_start>>>
tag=fork14 stime=1429706695
cmdline="fork14"
contacts=""
analysis=exit
<<<test_output>>>
fork14      1  TPASS  :  fork failed as expected.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=18
<<<test_end>>>
<<<test_start>>>
tag=fpathconf01 stime=1429706695
cmdline="fpathconf01"
contacts=""
analysis=exit
<<<test_output>>>
fpathconf01    1  TPASS  :  fpathconf(fd, _PC_MAX_CANON) returned 255
fpathconf01    2  TPASS  :  fpathconf(fd, _PC_MAX_INPUT) returned 255
fpathconf01    3  TPASS  :  fpathconf(fd, _PC_VDISABLE) returned 0
fpathconf01    4  TPASS  :  fpathconf(fd, _PC_LINK_MAX) returned 127
fpathconf01    5  TPASS  :  fpathconf(fd, _PC_NAME_MAX) returned 255
fpathconf01    6  TPASS  :  fpathconf(fd, _PC_PATH_MAX) returned 4096
fpathconf01    7  TPASS  :  fpathconf(fd, _PC_PIPE_BUF) returned 4096
fpathconf01    8  TPASS  :  fpathconf(fd, _PC_CHOWN_RESTRICTED) returned 1
fpathconf01    9  TPASS  :  fpathconf(fd, _PC_NO_TRUNC) returned 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat01 stime=1429706695
cmdline="fstat01"
contacts=""
analysis=exit
<<<test_output>>>
fstat01     1  TPASS  :  fstat returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fstat01_64 stime=1429706695
cmdline="fstat01_64"
contacts=""
analysis=exit
<<<test_output>>>
fstat01     1  TPASS  :  fstat returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat02 stime=1429706695
cmdline="fstat02"
contacts=""
analysis=exit
<<<test_output>>>
fstat02     1  TPASS  :  functionality of fstat correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat02_64 stime=1429706695
cmdline="fstat02_64"
contacts=""
analysis=exit
<<<test_output>>>
fstat02     1  TPASS  :  functionality of fstat correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat03 stime=1429706695
cmdline="fstat03"
contacts=""
analysis=exit
<<<test_output>>>
fstat03     1  TPASS  :  fstat() fails with expected error EBADF
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fstat03_64 stime=1429706695
cmdline="fstat03_64"
contacts=""
analysis=exit
<<<test_output>>>
fstat03     1  TPASS  :  fstat() fails with expected error EBADF
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat04 stime=1429706695
cmdline="fstat04"
contacts=""
analysis=exit
<<<test_output>>>
fstat04     1  TPASS  :  fstat functionality correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat04_64 stime=1429706695
cmdline="fstat04_64"
contacts=""
analysis=exit
<<<test_output>>>
fstat04     1  TPASS  :  fstat functionality correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat05 stime=1429706695
cmdline="fstat05"
contacts=""
analysis=exit
<<<test_output>>>
fstat05     1  TPASS  :  fstat failed with EFAULT as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat05_64 stime=1429706695
cmdline="fstat05_64"
contacts=""
analysis=exit
<<<test_output>>>
fstat05     1  TPASS  :  fstat failed with EFAULT as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstatat01 stime=1429706695
cmdline="fstatat01"
contacts=""
analysis=exit
<<<test_output>>>
fstatat01    1  TCONF  :  fstatat01.c:96: syscall __NR_fstatat64 not supported on your arch
fstatat01    2  TCONF  :  fstatat01.c:96: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fstatat01_64 stime=1429706695
cmdline="fstatat01_64"
contacts=""
analysis=exit
<<<test_output>>>
fstatat01    1  TCONF  :  fstatat01.c:96: syscall __NR_fstatat64 not supported on your arch
fstatat01    2  TCONF  :  fstatat01.c:96: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstatfs01 stime=1429706695
cmdline="fstatfs01"
contacts=""
analysis=exit
<<<test_output>>>
fstatfs01    1  TPASS  :  fstatfs() on a file - f_type=1021994
fstatfs01    2  TPASS  :  fstatfs() on a pipe - f_type=50495045
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstatfs01_64 stime=1429706695
cmdline="fstatfs01_64"
contacts=""
analysis=exit
<<<test_output>>>
fstatfs01    1  TPASS  :  fstatfs() on a file - f_type=1021994
fstatfs01    2  TPASS  :  fstatfs() on a pipe - f_type=50495045
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstatfs02 stime=1429706695
cmdline="fstatfs02"
contacts=""
analysis=exit
<<<test_output>>>
fstatfs02    1  TPASS  :  expected failure - errno = 9 : Bad file descriptor
fstatfs02    2  TPASS  :  expected failure - errno = 14 : Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstatfs02_64 stime=1429706695
cmdline="fstatfs02_64"
contacts=""
analysis=exit
<<<test_output>>>
fstatfs02    1  TPASS  :  expected failure - errno = 9 : Bad file descriptor
fstatfs02    2  TPASS  :  expected failure - errno = 14 : Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fsync01 stime=1429706695
cmdline="fsync01"
contacts=""
analysis=exit
<<<test_output>>>
fsync01     1  TPASS  :  fsync returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fsync02 stime=1429706695
cmdline="fsync02"
contacts=""
analysis=exit
<<<test_output>>>
fsync02     1  TPASS  :  fsync succeeded in an acceptable amount of time
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fsync03 stime=1429706696
cmdline="fsync03"
contacts=""
analysis=exit
<<<test_output>>>
fsync03     1  TPASS  :  expected failure - errno = 9 : Bad file descriptor
fsync03     2  TPASS  :  expected failure - errno = 22 : Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate01 stime=1429706696
cmdline="ftruncate01"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate01    1  TPASS  :  Functionality of ftruncate() on testfile successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate01_64 stime=1429706696
cmdline="ftruncate01_64"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate01_64    1  TPASS  :  Functionality of ftruncate() on testfile successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate02 stime=1429706696
cmdline="ftruncate02"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate02    1  TPASS  :  Functionality of ftruncate(2) on testfile successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate02_64 stime=1429706696
cmdline="ftruncate02_64"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate02_64    1  TPASS  :  Functionality of ftruncate(2) on testfile successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate03 stime=1429706696
cmdline="ftruncate03"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate03    1  TPASS  :  Test Passed
ftruncate03    2  TPASS  :  Test Passed
ftruncate03    3  TPASS  :  Test Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate03_64 stime=1429706696
cmdline="ftruncate03_64"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate03_64    1  TPASS  :  Test Passed
ftruncate03_64    2  TPASS  :  Test Passed
ftruncate03_64    3  TPASS  :  Test Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate04 stime=1429706696
cmdline="ftruncate04.sh"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate04    1  TCONF  :  ltpapicmd.c:190: backend mountpoint for /tmp/ltp-IiL6bmTun7 does not correspond to a real device:
Filesystem     1024-blocks  Used Available Capacity Mounted on
tmp                1022924  1512   1021412       1% /tmp
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=ftruncate04_64 stime=1429706696
cmdline="ftruncate04.sh 64"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate04_64    1  TCONF  :  ltpapicmd.c:190: backend mountpoint for /tmp/ltp-IiL6bmTun7 does not correspond to a real device:
Filesystem     1024-blocks  Used Available Capacity Mounted on
tmp                1022924  1512   1021412       1% /tmp
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=futimesat01 stime=1429706696
cmdline="futimesat01"
contacts=""
analysis=exit
<<<test_output>>>
futimesat01    1  TPASS  :  futimesat() returned the expected  errno 0: Success
futimesat01    2  TPASS  :  futimesat() returned the expected  errno 0: Success
futimesat01    3  TPASS  :  futimesat() returned the expected  errno 20: Not a directory
futimesat01    4  TPASS  :  futimesat() returned the expected  errno 9: Bad file descriptor
futimesat01    5  TPASS  :  futimesat() returned the expected  errno 0: Success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcontext01 stime=1429706696
cmdline="getcontext01"
contacts=""
analysis=exit
<<<test_output>>>
getcontext01    1  TPASS  :  getcontext passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcpu01 stime=1429706696
cmdline="getcpu01"
contacts=""
analysis=exit
<<<test_output>>>
getcpu01    1  TPASS  :  getcpu() returned proper cpuid:3, node id:0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcwd01 stime=1429706696
cmdline="getcwd01"
contacts=""
analysis=exit
<<<test_output>>>
getcwd01    0  TINFO  :  Test for EFAULT
getcwd01    1  TPASS  :  Test case 1 PASSED
getcwd01    0  TINFO  :  Test for ENOMEM
getcwd01    2  TPASS  :  Test case 2 PASSED
getcwd01    0  TINFO  :  Test for EINVAL
getcwd01    3  TPASS  :  Test case 3 PASSED
getcwd01    0  TINFO  :  Test for ERANGE
getcwd01    4  TPASS  :  Test case 4 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getcwd02 stime=1429706696
cmdline="getcwd02"
contacts=""
analysis=exit
<<<test_output>>>
getcwd02    0  TINFO  :  Enter Block 1
getcwd02    0  TINFO  :  Exit Block 1
getcwd02    1  TPASS  :  Block 1 PASSED
getcwd02    0  TINFO  :  Enter Block 2
getcwd02    0  TINFO  :  Exit Block 2
getcwd02    2  TPASS  :  Block 2 PASSED
getcwd02    0  TINFO  :  Enter Block 3
getcwd02    0  TINFO  :  Exit Block 3
getcwd02    3  TPASS  :  Block 3 PASSED
getcwd02    0  TINFO  :  Enter Block 4
getcwd02    0  TINFO  :  Exit Block 4
getcwd02    4  TPASS  :  Block 4 PASSED
getcwd02    0  TINFO  :  Enter Block 5
getcwd02    0  TINFO  :  Exit Block 5
getcwd02    5  TPASS  :  Block 5 PASSED
getcwd02    0  TINFO  :  Enter Block 6
getcwd02    0  TINFO  :  Exit Block 6
getcwd02    6  TPASS  :  Block 6 PASSED
getcwd02    0  TINFO  :  Enter Block 7
getcwd02    0  TINFO  :  Exit Block 7
getcwd02    7  TPASS  :  Block 7 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcwd03 stime=1429706696
cmdline="getcwd03"
contacts=""
analysis=exit
<<<test_output>>>
getcwd03    0  TINFO  :  getcwd(2) succeeded in returning correct path for dir1
getcwd03    0  TINFO  :  getcwd(2) succeeded in returning correct path for symbolic link dir2 -> dir1
getcwd03    1  TPASS  :  Test PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcwd04 stime=1429706696
cmdline="getcwd04"
contacts=""
analysis=exit
<<<test_output>>>
getcwd04    1  TPASS  :  Bug is not reproduced!
<<<execution_status>>>
initiation_status="ok"
duration=5 termination_type=exited termination_id=0 corefile=no
cutime=161 cstime=837
<<<test_end>>>
<<<test_start>>>
tag=getdents01 stime=1429706701
cmdline="getdents01"
contacts=""
analysis=exit
<<<test_output>>>
getdents01    0  TINFO  :  Found '.'
getdents01    0  TINFO  :  Found '..'
getdents01    0  TINFO  :  Found 'symlink'
getdents01    0  TINFO  :  Found 'file'
getdents01    0  TINFO  :  Found 'dir'
getdents01    1  TPASS  :  All entires found
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdents02 stime=1429706701
cmdline="getdents02"
contacts=""
analysis=exit
<<<test_output>>>
getdents02    1  TPASS  :  getdents failed as expected: Bad file descriptor
getdents02    2  TPASS  :  getdents failed as expected: Invalid argument
getdents02    3  TPASS  :  getdents failed as expected: Not a directory
getdents02    4  TPASS  :  getdents failed as expected: No such file or directory
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getdents01_64 stime=1429706701
cmdline="getdents01 -l"
contacts=""
analysis=exit
<<<test_output>>>
getdents01    0  TINFO  :  Found '.'
getdents01    0  TINFO  :  Found '..'
getdents01    0  TINFO  :  Found 'symlink'
getdents01    0  TINFO  :  Found 'file'
getdents01    0  TINFO  :  Found 'dir'
getdents01    1  TPASS  :  All entires found
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdents02_64 stime=1429706701
cmdline="getdents02 -l"
contacts=""
analysis=exit
<<<test_output>>>
getdents02    1  TPASS  :  getdents failed as expected: Bad file descriptor
getdents02    2  TPASS  :  getdents failed as expected: Invalid argument
getdents02    3  TPASS  :  getdents failed as expected: Not a directory
getdents02    4  TPASS  :  getdents failed as expected: No such file or directory
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdomainname01 stime=1429706701
cmdline="getdomainname01"
contacts=""
analysis=exit
<<<test_output>>>
getdomainname01    1  TPASS  :  getdomainname() returned 0 
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdtablesize01 stime=1429706701
cmdline="getdtablesize01"
contacts=""
analysis=exit
<<<test_output>>>
getdtablesize01    0  TINFO  :  Maximum number of files a process can have opened is 1024
getdtablesize01    0  TINFO  :  Checking with the value returned by getrlimit...RLIMIT_NOFILE
getdtablesize01    1  TPASS  :  got correct dtablesize, value is 1024
getdtablesize01    0  TINFO  :  Checking Max num of files that can be opened by a process.Should be: RLIMIT_NOFILE - 1
getdtablesize01    2  TPASS  :  1023 = 1023
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getegid01 stime=1429706701
cmdline="getegid01"
contacts=""
analysis=exit
<<<test_output>>>
getegid01    1  TPASS  :  getegid returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getegid01_16 stime=1429706701
cmdline="getegid01_16"
contacts=""
analysis=exit
<<<test_output>>>
getegid01_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getegid/../utils/compat_16.h:108: 16-bit version of getegid() is not supported on your platform
getegid01_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getegid/../utils/compat_16.h:108: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getegid02 stime=1429706701
cmdline="getegid02"
contacts=""
analysis=exit
<<<test_output>>>
getegid02    1  TPASS  :  effective group id 0 is correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getegid02_16 stime=1429706701
cmdline="getegid02_16"
contacts=""
analysis=exit
<<<test_output>>>
getegid02_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getegid/../utils/compat_16.h:108: 16-bit version of getegid() is not supported on your platform
getegid02_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getegid/../utils/compat_16.h:108: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=geteuid01 stime=1429706701
cmdline="geteuid01"
contacts=""
analysis=exit
<<<test_output>>>
geteuid01    1  TPASS  :  geteuid returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=geteuid01_16 stime=1429706701
cmdline="geteuid01_16"
contacts=""
analysis=exit
<<<test_output>>>
geteuid01_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/geteuid/../utils/compat_16.h:103: 16-bit version of geteuid() is not supported on your platform
geteuid01_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/geteuid/../utils/compat_16.h:103: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=geteuid02 stime=1429706701
cmdline="geteuid02"
contacts=""
analysis=exit
<<<test_output>>>
geteuid02    1  TPASS  :  values from geteuid and getpwuid match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=geteuid02_16 stime=1429706701
cmdline="geteuid02_16"
contacts=""
analysis=exit
<<<test_output>>>
geteuid02_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/geteuid/../utils/compat_16.h:103: 16-bit version of geteuid() is not supported on your platform
geteuid02_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/geteuid/../utils/compat_16.h:103: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgid01 stime=1429706701
cmdline="getgid01"
contacts=""
analysis=exit
<<<test_output>>>
getgid01    1  TPASS  :  getgid returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgid01_16 stime=1429706701
cmdline="getgid01_16"
contacts=""
analysis=exit
<<<test_output>>>
getgid01_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgid/../utils/compat_16.h:98: 16-bit version of getgid() is not supported on your platform
getgid01_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgid/../utils/compat_16.h:98: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgid03 stime=1429706701
cmdline="getgid03"
contacts=""
analysis=exit
<<<test_output>>>
getgid03    1  TPASS  :  values from getuid and getpwuid match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgid03_16 stime=1429706701
cmdline="getgid03_16"
contacts=""
analysis=exit
<<<test_output>>>
getgid03_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgid/../utils/compat_16.h:98: 16-bit version of getgid() is not supported on your platform
getgid03_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgid/../utils/compat_16.h:98: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgroups01 stime=1429706701
cmdline="getgroups01"
contacts=""
analysis=exit
<<<test_output>>>
getgroups01    1  TPASS  :  getgroups failed as expected with EINVAL
getgroups01    2  TPASS  :  getgroups did not modify the gidset array
getgroups01    3  TPASS  :  getgroups failed as expected with EINVAL
getgroups01    4  TPASS  :  getgroups(NGROUPS,gidset) returned 2 contains gid 0 (from getgid)
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgroups01_16 stime=1429706701
cmdline="getgroups01_16"
contacts=""
analysis=exit
<<<test_output>>>
getgroups01_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgroups/../utils/compat_16.h:78: 16-bit version of getgroups() is not supported on your platform
getgroups01_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgroups/../utils/compat_16.h:78: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgroups03 stime=1429706701
cmdline="getgroups03"
contacts=""
analysis=exit
<<<test_output>>>
getgroups03    1  TPASS  :  getgroups functionality correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgroups03_16 stime=1429706701
cmdline="getgroups03_16"
contacts=""
analysis=exit
<<<test_output>>>
getgroups03_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgroups/../utils/compat_16.h:73: 16-bit version of setgroups() is not supported on your platform
getgroups03_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgroups/../utils/compat_16.h:73: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gethostid01 stime=1429706701
cmdline="gethostid01"
contacts=""
analysis=exit
<<<test_output>>>
gethostid01    1  TPASS  :  Hostid command and gethostid both report hostid is 007f0100
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gethostname01 stime=1429706701
cmdline="gethostname01"
contacts=""
analysis=exit
<<<test_output>>>
gethostname01    1  TPASS  :  gethostname returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getitimer01 stime=1429706701
cmdline="getitimer01"
contacts=""
analysis=exit
<<<test_output>>>
getitimer01    1  TPASS  :  functionality is ok
getitimer01    2  TPASS  :  functionality is ok
getitimer01    3  TPASS  :  functionality is ok
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getitimer02 stime=1429706701
cmdline="getitimer02"
contacts=""
analysis=exit
<<<test_output>>>
getitimer02    1  TPASS  :  expected failure - errno = 14 - Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getitimer03 stime=1429706701
cmdline="getitimer03"
contacts=""
analysis=exit
<<<test_output>>>
getitimer03    1  TPASS  :  expected failure - errno = 22 - Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getpagesize01 stime=1429706701
cmdline="getpagesize01"
contacts=""
analysis=exit
<<<test_output>>>
getpagesize01    0  TINFO  :  Page Size is 4096
getpagesize01    1  TPASS  :  getpagesize - Page size returned 4096
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpeername01 stime=1429706701
cmdline="getpeername01"
[  265.503685] serial8250: too much work for irq4
contacts=""
analysis=exit
<<<test_output>>>
getpeername01    1  TPASS  :  test getpeername() EBADF successful
getpeername01    2  TPASS  :  test getpeername() ENOTSOCK successful
getpeername01    3  TPASS  :  test getpeername() ENOTCONN successful
getpeername01    4  TPASS  :  test getpeername() EINVAL successful
getpeername01    5  TPASS  :  test getpeername() EFAULT successful
getpeername01    6  TPASS  :  test getpeername() EFAULT successful
getpeername01    7  TPASS  :  test getpeername() EFAULT successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpgid01 stime=1429706701
cmdline="getpgid01"
contacts=""
analysis=exit
<<<test_output>>>
getpgid01    0  TINFO  :  Enter block 1
getpgid01    1  TPASS  :  Test block 1: getpgid(0) PASSED
getpgid01    0  TINFO  :  Exit block 1
getpgid01    0  TINFO  :  Enter block 2
getpgid01    2  TPASS  :  Test block 2: getpgid(getpid()) PASSED
getpgid01    0  TINFO  :  Exit block 2
getpgid01    0  TINFO  :  Enter block 3
getpgid01    3  TPASS  :  Test block 3: getpgid(getppid()) PASSED
getpgid01    0  TINFO  :  Exit block 3
getpgid01    0  TINFO  :  Enter block 4
getpgid01    4  TPASS  :  Test block 4: getpgid(1) PASSED
getpgid01    0  TINFO  :  Exit block 4
getpgid01    0  TINFO  :  Enter block 5
getpgid01    5  TPASS  :  Test block 5: getpgid(1) PASSED
getpgid01    0  TINFO  :  Exit block 5
getpgid01    0  TINFO  :  getpgid01 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpgid02 stime=1429706701
cmdline="getpgid02"
contacts=""
analysis=exit
<<<test_output>>>
getpgid02    1  TPASS  :  expected failure - errno = 3 : No such process
getpgid02    2  TPASS  :  expected failure - errno = 3 : No such process
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpgrp01 stime=1429706701
cmdline="getpgrp01"
contacts=""
analysis=exit
<<<test_output>>>
getpgrp01    1  TPASS  :  getpgrp returned 10577
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpid01 stime=1429706701
cmdline="getpid01"
contacts=""
analysis=exit
<<<test_output>>>
getpid01    1  TPASS  :  getpid returned 10578
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpid02 stime=1429706701
cmdline="getpid02"
contacts=""
analysis=exit
<<<test_output>>>
getpid02    1  TPASS  :  getpid functionality is correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getppid01 stime=1429706701
cmdline="getppid01"
contacts=""
analysis=exit
<<<test_output>>>
getppid01    1  TPASS  :  getppid returned 510
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getppid02 stime=1429706701
cmdline="getppid02"
contacts=""
analysis=exit
<<<test_output>>>
return value and parent's pid value match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpriority01 stime=1429706701
cmdline="getpriority01"
contacts=""
analysis=exit
<<<test_output>>>
getpriority01    1  TPASS  :  getpriority(0, 0) returned 0 priority value
getpriority01    2  TPASS  :  getpriority(1, 0) returned 0 priority value
getpriority01    3  TPASS  :  getpriority(2, 0) returned -20 priority value
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpriority02 stime=1429706701
cmdline="getpriority02"
contacts=""
analysis=exit
<<<test_output>>>
getpriority02    1  TPASS  :  getpriority(2) fails, Invalid 'which' value specified, errno:22
getpriority02    2  TPASS  :  getpriority(2) fails, Invalid 'who' value specified, errno:3
getpriority02    3  TPASS  :  getpriority(2) fails, Invalid 'who' value specified, errno:3
getpriority02    4  TPASS  :  getpriority(2) fails, Invalid 'who' value specified, errno:3
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getresgid01 stime=1429706701
cmdline="getresgid01"
contacts=""
analysis=exit
<<<test_output>>>
getresgid01    1  TPASS  :  Functionality of getresgid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getresgid02 stime=1429706701
cmdline="getresgid02"
contacts=""
analysis=exit
<<<test_output>>>
getresgid02    1  TPASS  :  Functionality of getresgid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getresgid03 stime=1429706701
cmdline="getresgid03"
contacts=""
analysis=exit
<<<test_output>>>
getresgid03    1  TPASS  :  Functionality of getresgid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getresuid01 stime=1429706701
cmdline="getresuid01"
contacts=""
analysis=exit
<<<test_output>>>
getresuid01    1  TPASS  :  Functionality of getresuid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getresuid02 stime=1429706701
cmdline="getresuid02"
contacts=""
analysis=exit
<<<test_output>>>
getresuid02    1  TPASS  :  Functionality of getresuid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getresuid03 stime=1429706701
cmdline="getresuid03"
contacts=""
analysis=exit
<<<test_output>>>
getresuid03    1  TPASS  :  Functionality of getresuid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getrlimit01 stime=1429706701
cmdline="getrlimit01"
contacts=""
analysis=exit
<<<test_output>>>
getrlimit01    1  TPASS  :  getrlimit() test RLIMIT_CPU success
getrlimit01    2  TPASS  :  getrlimit() test RLIMIT_FSIZE success
getrlimit01    3  TPASS  :  getrlimit() test RLIMIT_DATA success
getrlimit01    4  TPASS  :  getrlimit() test RLIMIT_STACK success
getrlimit01    5  TPASS  :  getrlimit() test RLIMIT_CORE success
getrlimit01    6  TPASS  :  getrlimit() test RLIMIT_RSS success
getrlimit01    7  TPASS  :  getrlimit() test RLIMIT_NPROC success
getrlimit01    8  TPASS  :  getrlimit() test RLIMIT_NOFILE success
getrlimit01    9  TPASS  :  getrlimit() test RLIMIT_MEMLOCK success
getrlimit01   10  TPASS  :  getrlimit() test RLIMIT_AS success
getrlimit01   11  TPASS  :  getrlimit() test RLIMIT_LOCKS success
getrlimit01   12  TPASS  :  getrlimit() test RLIMIT_MSGQUEUE success
getrlimit01   13  TPASS  :  getrlimit() test RLIMIT_NICE success
getrlimit01   14  TPASS  :  getrlimit() test RLIMIT_RTPRIO success
getrlimit01   15  TPASS  :  getrlimit() test RLIMIT_SIGPENDING success
getrlimit01   16  TPASS  :  getrlimit() test RLIMIT_RTTIME success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start
[  265.545188] serial8250: too much work for irq4
>>>
tag=getrlimit02 stime=1429706701
cmdline="getrlimit02"
contacts=""
analysis=exit
<<<test_output>>>
getrlimit02    1  TPASS  :  expected failure; got EFAULT
getrlimit02    2  TPASS  :  expected failure; got EINVAL
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=get_mempolicy01 stime=1429706701
cmdline="get_mempolicy01"
contacts=""
analysis=exit
<<<test_output>>>
get_mempolicy01    1  TCONF  :  get_mempolicy01.c:351: System doesn't have required numa support
get_mempolicy01    2  TCONF  :  get_mempolicy01.c:351: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=get_robust_list01 stime=1429706701
cmdline="get_robust_list01"
contacts=""
analysis=exit
<<<test_output>>>
get_robust_list01    1  TPASS  :  get_robust_list failed as expected with EFAULT
get_robust_list01    2  TPASS  :  get_robust_list failed as expected with EFAULT
get_robust_list01    3  TPASS  :  get_robust_list failed as expected with ESRCH
get_robust_list01    4  TPASS  :  get_robust_list succeeded
get_robust_list01    5  TPASS  :  get_robust_list failed as expected with EPERM
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getrusage01 stime=1429706701
cmdline="getrusage01"
contacts=""
analysis=exit
<<<test_output>>>
getrusage01    1  TPASS  :  getrusage passed
getrusage01    2  TPASS  :  getrusage passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getrusage02 stime=1429706701
cmdline="getrusage02"
contacts=""
analysis=exit
<<<test_output>>>
getrusage02    1  TPASS  :  getrusage failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
getrusage02    2  TPASS  :  getrusage failed as expected: TEST_ERRNO=EFAULT(14): Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getrusage03 stime=1429706701
cmdline="getrusage03"
contacts=""
analysis=exit
<<<test_output>>>
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103832
getrusage03    0  TINFO  :  child.self = 102532
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103832
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103676
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    0  TINFO  :  child.children = 0
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103832
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103676
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    3  TPASS  :  child.children == 0
getrusage03    0  TINFO  :  Testcase #03: fork + malloc
getrusage03    0  TINFO  :  initial.self = 104064
getrusage03    0  TINFO  :  child allocate +50MB
getrusage03    0  TINFO  :  child.self = 154396
getrusage03_child    0  TINFO  :  grandchild allocate 300MB
getrusage03_child    0  TINFO  :  grandchild allocate 300MB
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103832
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103676
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    3  TPASS  :  child.children == 0
getrusage03    0  TINFO  :  Testcase #03: fork + malloc
getrusage03    0  TINFO  :  initial.self = 104064
getrusage03    4  TPASS  :  initial.self + 50MB ~= child.self
getrusage03    0  TINFO  :  Testcase #04: grandchild maxrss
getrusage03    0  TINFO  :  initial.children = 154880
getrusage03_child    0  TINFO  :  child allocate 400MB
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103832
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103676
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    3  TPASS  :  child.children == 0
getrusage03    0  TINFO  :  Testcase #03: fork + malloc
getrusage03    0  TINFO  :  initial.self = 104064
getrusage03    4  TPASS  :  initial.self + 50MB ~= child.self
getrusage03    0  TINFO  :  Testcase #04: grandchild maxrss
getrusage03    0  TINFO  :  initial.children = 154880
getrusage03    0  TINFO  :  post_wait.children = 308204
getrusage03    5  TPASS  :  child.children ~= 300MB
getrusage03    0  TINFO  :  Testcase #05: zombie
getrusage03    0  TINFO  :  initial.children = 308204
getrusage03_child    0  TINFO  :  child allocate 500MB
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103832
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103676
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    3  TPASS  :  child.children == 0
getrusage03    0  TINFO  :  Testcase #03: fork + malloc
getrusage03    0  TINFO  :  initial.self = 104064
getrusage03    4  TPASS  :  initial.self + 50MB ~= child.self
getrusage03    0  TINFO  :  Testcase #04: grandchild maxrss
getrusage03    0  TINFO  :  initial.children = 154880
getrusage03    0  TINFO  :  post_wait.children = 308204
getrusage03    5  TPASS  :  child.children ~= 300MB
getrusage03    0  TINFO  :  Testcase #05: zombie
getrusage03    0  TINFO  :  initial.children = 308204
getrusage03    0  TINFO  :  pre_wait.children = 308204
getrusage03    6  TPASS  :  initial.children ~= pre_wait.children
getrusage03    0  TINFO  :  post_wait.children = 411256
getrusage03    7  TPASS  :  post_wait.children ~= 400MB
getrusage03    0  TINFO  :  Testcase #06: SIG_IGN
getrusage03    0  TINFO  :  initial.children = 411256
getrusage03_child    0  TINFO  :  exec.self = 104084, exec.children = 411256
getrusage03_child    1  TPASS  :  initial.self ~= exec.self
getrusage03_child    2  TPASS  :  initial.children ~= exec.children
<<<execution_status>>>
initiation_status="ok"
duration=3 termination_type=exited termination_id=0 corefile=no
cutime=12 cstime=140
<<<test_end>>>
<<<test_start>>>
tag=getrusage04 stime=1429706704
cmdline="getrusage04"
contacts=""
analysis=exit
<<<test_output>>>
getrusage04    0  TINFO  :  Expected timers granularity is 1000 us
getrusage04    0  TINFO  :  Using 1 as multiply factor for max [us]time increment (1000+1000us)!
getrusage04    0  TINFO  :  utime:         625us; stime:           0us
getrusage04    0  TINFO  :  utime:         811us; stime:         811us
getrusage04    0  TINFO  :  utime:         875us; stime:        1751us
getrusage04    0  TINFO  :  utime:         904us; stime:        2713us
getrusage04    0  TINFO  :  utime:         923us; stime:        3693us
getrusage04    0  TINFO  :  utime:        1874us; stime:        3749us
getrusage04    0  TINFO  :  utime:        1887us; stime:        4717us
getrusage04    0  TINFO  :  utime:        1901us; stime:        5703us
getrusage04    0  TINFO  :  utime:        1913us; stime:        6696us
getrusage04    0  TINFO  :  utime:        1918us; stime:        7675us
getrusage04    0  TINFO  :  utime:        1925us; stime:        8666us
getrusage04    0  TINFO  :  utime:        1932us; stime:        9660us
getrusage04    0  TINFO  :  utime:        1932us; stime:        9663us
getrusage04    0  TINFO  :  utime:        1935us; stime:       10645us
getrusage04    0  TINFO  :  utime:        1940us; stime:       11641us
getrusage04    0  TINFO  :  utime:        1944us; stime:       12642us
getrusage04    0  TINFO  :  utime:        2919us; stime:       12650us
getrusage04    0  TINFO  :  utime:        2923us; stime:       13645us
getrusage04    0  TINFO  :  utime:        2928us; stime:       14644us
getrusage04    0  TINFO  :  utime:        2930us; stime:       15629us
getrusage04    0  TINFO  :  utime:        2933us; stime:       16625us
getrusage04    1  TPASS  :  Test Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=3
<<<test_end>>>
<<<test_start>>>
tag=getsid01 stime=1429706704
cmdline="getsid01"
contacts=""
analysis=exit
<<<test_output>>>
getsid01    1  TPASS  :  session ID is correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getsid02 stime=1429706704
cmdline="getsid02"
contacts=""
analysis=exit
<<<test_output>>>
getsid02    1  TPASS  :  expected failure - errno = 3 - No such process
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getsockname01 stime=1429706704
cmdline="getsockname01"
contacts=""
analysis=exit
<<<test_output>>>
getsockname01    1  TPASS  :  bad file descriptor successful
getsockname01    2  TPASS  :  bad file descriptor successful
getsockname01    3  TPASS  :  invalid socket buffer successful
getsockname01    4  TPASS  :  invalid aligned salen successful
getsockname01    5  TPASS  :  invalid unaligned salen successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getsockopt01 stime=1429706704
cmdline="getsockopt01"
contacts=""
analysis=exit
<<<test_output>>>
getsockopt01    1  TPASS  :  bad file descriptor successful
getsockopt01    2  TPASS  :  bad file descriptor successful
getsockopt01    3  TPASS  :  invalid option buffer successful
getsockopt01    4  TPASS  :  invalid optlen successful
getsockopt01    5  TPASS  :  invalid level successful
getsockopt01    6  TPASS  :  invalid option name successful
getsockopt01    7  TPASS  :  invalid option name (UDP) successful
getsockopt01    8  TPASS  :  invalid option name (IP) successful
getsockopt01    9  TPASS  :  invalid option name (TCP) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=gettid01 stime=1429706704
cmdline="gettid01"
contacts=""
analysis=exit
<<<test_output>>>
gettid01    1  TPASS  :  gettid() returned 10617
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gettimeofday01 stime=1429706704
cmdline="gettimeofday01"
contacts=""
analysis=exit
<<<test_output>>>
gettimeofday01    1  TPASS  :  gettimeofday(2) set the errno EFAULT correctly
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gettimeofday02 stime=1429706704
cmdline="gettimeofday02"
contacts=""
analysis=exit
<<<test_output>>>
gettimeofday02    0  TINFO  :  checking if gettimeofday is monotonous, takes 30s
gettimeofday02    1  TPASS  :  gettimeofday monotonous in 30 seconds
<<<execution_status>>>
initiation_status="ok"
duration=30 termination_type=exited termination_id=0 corefile=no
cutime=552 cstime=2447
<<<test_end>>>
<<<test_start>>>
tag=getuid01 stime=1429706734
cmdline="getuid01"
contacts=""
analysis=exit
<<<test_output>>>
getuid01    1  TPASS  :  getuid returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getuid01_16 stime=1429706734
cmdline="getuid01_16"
contacts=""
analysis=exit
<<<test_output>>>
getuid01_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getuid/../utils/compat_16.h:88: 16-bit version of getuid() is not supported on your platform
getuid01_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getuid/../utils/compat_16.h:88: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getuid03 stime=1429706734
cmdline="getuid03"
contacts=""
analysis=exit
<<<test_output>>>
getuid03    1  TPASS  :  values from getuid and getpwuid match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getuid03_16 stime=1429706734
cmdline="getuid03_16"
contacts=""
analysis=exit
<<<test_output>>>
getuid03_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getuid/../utils/compat_16.h:88: 16-bit version of getuid() is not supported on your platform
getuid03_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getuid/../utils/compat_16.h:88: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getxattr01 stime=1429706734
cmdline="getxattr01"
contacts=""
analysis=exit
<<<test_output>>>
getxattr01    1  TCONF  :  getxattr01.c:182: <attr/xattr.h> does not exist.
getxattr01    2  TCONF  :  getxattr01.c:182: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getxattr02 stime=1429706734
cmdline="getxattr02"
contacts=""
analysis=exit
<<<test_output>>>
getxattr02    1  TCONF  :  getxattr02.c:169: <attr/xattr.h> does not exist.
getxattr02    2  TCONF  :  getxattr02.c:169: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getxattr03 stime=1429706734
cmdline="getxattr03"
contacts=""
analysis=exit
<<<test_output>>>
getxattr03    1  TCONF  :  getxattr03.c:121: <attr/xattr.h> does not exist.
getxattr03    2  TCONF  :  getxattr03.c:121: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ioctl01_02 stime=1429706734
cmdline="  test_ioctl"
contacts=""
analysis=exit
<<<test_output>>>
ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty0
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty0

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty1
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty1

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty10
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty10

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty11
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty11

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty12
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty12

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty13
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty13

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty14
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty14

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty15
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty15

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty16
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty16

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty17
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty17

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty18
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty18

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty19
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty19

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty2
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty2

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty20
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty20

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty21
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty21

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty22
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty22

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty23
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty23

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty24
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty24

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty25
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty25

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty26
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty26

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty27
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty27

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty28
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty28

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty29
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty29

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty3
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty3

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty30
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty30

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty31
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty31

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty32
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty32

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty33
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty33

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty34
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty34

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty35
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty35

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty36
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty36

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty37
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty37

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty38
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty38

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty39
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty39

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty4
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty4

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty40
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty40

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty41
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty41

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty42
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty42

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty43
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty43

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty44
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty44

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty45
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty45

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty46
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty46

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty47
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty47

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty48
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty48

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty49
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty49

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty5
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty5

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty50
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty50

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty51
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty51

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty52
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty52

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty53
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty53

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty54
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty54

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty55
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty55

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty56
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty56

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty57
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty57

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty58
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty58

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty59
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty59

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty6
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty6

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty60
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty60

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty61
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty61

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty62
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty62

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty63
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty63

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty7
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty7

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty8
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty8

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty9
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty9

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty0
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty0

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty1
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty1

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty10
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty10

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty11
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty11

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty12
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty12

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty13
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty13

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty14
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty14

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty15
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty15

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty16
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty16

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty17
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty17

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty18
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty18

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty19
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty19

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty2
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty2

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty20
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty20

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty21
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty21

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty22
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty22

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty23
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty23

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty24
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty24

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty25
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty25

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty26
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty26

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty27
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty27

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty28
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty28

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty29
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty29

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty3
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty3

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty30
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty30

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty31
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty31

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty32
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty32

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty33
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty33

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty34
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty34

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty35
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty35

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty36
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty36

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty37
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty37

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty38
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty38

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty39
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty39

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty4
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty4

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty40
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty40

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty41
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty41

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty42
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty42

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty43
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty43

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty44
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty44

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty45
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty45

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty46
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty46

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty47
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty47

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty48
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty48

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty49
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty49

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty5
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty5

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty50
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty50

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty51
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty51

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty52
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty52

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty53
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty53

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty54
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty54

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty55
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty55

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty56
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty56

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty57
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty57

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty58
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty58

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty59
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty59

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty6
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty6

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty60
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty60

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty61
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty61

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty62
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty62

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty63
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty63

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty7
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty7

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty8
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty8

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty9
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty9

<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=7 cstime=43
<<<test_end>>>
<<<test_start>>>
tag=ioctl03 stime=1429706735
cmdline="     ioctl03"
contacts=""
analysis=exit
<<<test_output>>>
ioctl03     0  TINFO  :  Available features are: 0x7103
ioctl03     0  TINFO  :  TUN 0x1
ioctl
[  299.612921] tun: Universal TUN/TAP device driver, 1.6
03     0  TINFO  :  TAP 0x2
ioctl03     0  TINFO  :  NO_PI 0x1000
ioctl03     0  TINFO  :  ONE_QUEUE 0x2000
ioctl03     0  TINFO  :  VNET_HDR 0x4000
ioctl03     0  TINFO  :  MULTI_QUEUE 0x
[  299.612922] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
100
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify_init1_01 stime=1429706735
cmdline="inotify_init1_01"
contacts=""
analysis=exit
<<<test_output>>>
inotify_init1_01    1  TPASS  :  inotify_init1(O_CLOEXEC) PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify_init1_02 stime=1429706735
cmdline="inotify_init1_02"
contacts=""
analysis=exit
<<<test_output>>>
inotify_init1_02    1  TPASS  :  inotify_init1(IN_NONBLOCK) PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify01 stime=1429706735
cmdline="inotify01"
contacts=""
analysis=exit
<<<test_output>>>
inotify01    1  TPASS  :  get event: wd=1 mask=4 cookie=0 len=0
inotify01    2  TPASS  :  get event: wd=1 mask=20 cookie=0 len=0
inotify01    3  TPASS  :  get event: wd=1 mask=1 cookie=0 len=0
inotify01    4  TPASS  :  get event: wd=1 mask=10 cookie=0 len=0
inotify01    5  TPASS  :  get event: wd=1 mask=20 cookie=0 len=0
inotify01    6  TPASS  :  get event: wd=1 mask=2 cookie=0 len=0
inotify01    7  TPASS  :  get event: wd=1 mask=8 cookie=0 len=0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify02 stime=1429706735
cmdline="inotify02"
contacts=""
analysis=exit
<<<test_output>>>
inotify02    1  TPASS  :  get event: wd=1 mask=40000004 cookie=0 len=0 name=""
inotify02    2  TPASS  :  get event: wd=1 mask=100 cookie=0 len=16 name="test_file1"
inotify02    3  TPASS  :  get event: wd=1 mask=20 cookie=0 len=16 name="test_file1"
inotify02    4  TPASS  :  get event: wd=1 mask=8 cookie=0 len=16 name="test_file1"
inotify02    5  TPASS  :  get event: wd=1 mask=40 cookie=2524652 len=16 name="test_file1"
inotify02    6  TPASS  :  get event: wd=1 mask=80 cookie=2524652 len=16 name="test_file2"
inotify02    7  TPASS  :  get event: wd=1 mask=800 cookie=0 len=0 name=""
inotify02    8  TPASS  :  get event: wd=1 mask=200 cookie=0 len=16 name="test_file2"
inotify02    9  TPASS  :  get event: wd=1 mask=800 cookie=0 len=0 name=""
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=inotify03 stime=1429706735
cmdline="inotify03"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
[  299.637602] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  299.637818] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
inotify03    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
inotify03    0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
inotify03    0  TINFO  :  mount /dev/loop0 to mntpoint fs_type=ext2
inotify03    0  TINFO  :  umount /dev/loop0
inotify03    1  TPASS  :  get event: wd=1 mask=2000 cookie=0 len=0
inotify03    2  TPASS  :  get event: wd=1 mask=8000 cookie=0 len=0
inotify03    3  TPASS  :  inotify_rm_watch (7, 1) returned EINVAL
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=inotify04 stime=1429706735
cmdline="inotify04"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify05 stime=1429706735
cmdline="inotify05"
contacts=""
analysis=exit
<<<test_output>>>
inotify05    1  TPASS  :  get event: wd=-1 mask=4000 cookie=0 len=0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=2
<<<test_end>>>
<<<test_start>>>
tag=fanotify01 stime=1429706735
cmdline="fanotify01"
contacts=""
analysis=exit
<<<test_output>>>
fanotify01    1  TPASS  :  get event: mask=31 pid=11237 fd=8
fanotify01    2  TPASS  :  get event: mask=11 pid=11237 fd=4294967294
fanotify01    3  TPASS  :  get event: mask=10 pid=11237 fd=4294967294
fanotify01    4  TPASS  :  get event: mask=2a pid=11237 fd=9
fanotify01    5  TPASS  :  get event: mask=a pid=11237 fd=4294967294
fanotify01    6  TPASS  :  get event: mask=8 pid=11237 fd=4294967294
fanotify01    7  TPASS  :  get event: mask=20 pid=11237 fd=11
fanotify01    8  TPASS  :  get event: mask=b pid=11237 fd=10
fanotify01    9  TPASS  :  get event: mask=9 pid=11237 fd=4294967294
fanotify01   10  TPASS  :  get event: mask=8 pid=11237 fd=4294967294
fanotify01   11  TPASS  :  get event: mask=2 pid=11237 fd=13
fanotify01   12  TPASS  :  get event: mask=8 pid=11237 fd=12
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fanotify02 stime=1429706735
cmdline="fanotify02"
contacts=""
analysis=exit
<<<test_output>>>
[ 4283.197601] i6300esb: Unexpected close, not stopping watchdog!
[ 4283.200494] systemd-journald[117]: Received SIGTERM from PID 624 (watchdog).
[ 4283.201894] systemd-journald[117]: systemd-journald stopped as pid 117
[ 4283.361091] systemd-default-display-manager-generator[12774]: No /etc/X11/default-display-manager file, nothing to generate
[ 4283.370838] systemd-gpt-auto-generator[12775]: Root file system not on a (single) block device.
[ 4283.380829] systemd-fstab-generator[12776]: Parsing /etc/fstab
[ 4283.390812] systemd-rc-local-generator[12777]: Automatically adding rc-local.service.
[ 4283.400844] systemd-sysv-generator[12778]: Looking for unit files in (higher priority first):
[ 4283.404245] systemd-sysv-generator[12778]: Looking for SysV init scripts in:
[ 4283.405268] systemd-sysv-generator[12778]: Looking for SysV rcN.d links in:
[ 4283.407219] systemd-sysv-generator[12778]: Ignoring S03mountdevsubfs.sh symlink in rcS.d, not generating mountdevsubfs.service.
[ 4283.408234] systemd-sysv-generator[12778]: Ignoring S10udev-finish symlink in rcS.d, not generating udev-finish.service.
[ 4283.409205] systemd-sysv-generator[12778]: Ignoring S16x11-common symlink in rcS.d, not generating x11-common.service.
[ 4283.410149] systemd-sysv-generator[12778]: Ignoring S10procps symlink in rcS.d, not generating procps.service.
[ 4283.411036] systemd-sysv-generator[12778]: Ignoring S14mountnfs.sh symlink in rcS.d, not generating mountnfs.service.
[ 4283.411962] systemd-sysv-generator[12778]: Ignoring S15mountnfs-bootclean.sh symlink in rcS.d, not generating mountnfs-bootclean.service.
[ 4283.413019] systemd-sysv-generator[12778]: Ignoring S07checkroot-bootclean.sh symlink in rcS.d, not generating checkroot-bootclean.service.
[ 4283.414111] systemd-sysv-generator[12778]: Ignoring S05checkroot.sh symlink in rcS.d, not generating checkroot.service.
[ 4283.414990] systemd-sysv-generator[12778]: Ignoring S04hwclock.sh symlink in rcS.d, not generating hwclock.service.
[ 4283.415879] systemd-sysv-generator[12778]: Ignoring S09mountall-bootclean.sh symlink in rcS.d, not generating mountall-bootclean.service.
[ 4283.416895] systemd-sysv-generator[12778]: Ignoring S10urandom symlink in rcS.d, not generating urandom.service.
[ 4283.417779] systemd-sysv-generator[12778]: Ignoring S07kmod symlink in rcS.d, not generating kmod.service.
[ 4283.418576] systemd-sysv-generator[12778]: Ignoring S16bootmisc.sh symlink in rcS.d, not generating bootmisc.service.
[ 4283.419449] systemd-sysv-generator[12778]: Ignoring S01mountkernfs.sh symlink in rcS.d, not generating mountkernfs.service.
[ 4283.420487] systemd-sysv-generator[12778]: Ignoring S01hostname.sh symlink in rcS.d, not generating hostname.service.
[ 4283.421377] systemd-sysv-generator[12778]: Ignoring S02udev symlink in rcS.d, not generating udev.service.
[ 4283.422180] systemd-sysv-generator[12778]: Ignoring S06checkfs.sh symlink in rcS.d, not generating checkfs.service.
[ 4283.423032] systemd-sysv-generator[12778]: Ignoring S08mountall.sh symlink in rcS.d, not generating mountall.service.
[ 4283.423959] systemd-sysv-generator[12778]: Ignoring K02ipmievd symlink in rc1.d, not generating ipmievd.service.
[ 4283.424851] systemd-sysv-generator[12778]: Ignoring S01bootlogs symlink in rc1.d, not generating bootlogs.service.
[ 4283.425760] systemd-sysv-generator[12778]: Ignoring S01killprocs symlink in rc1.d, not generating killprocs.service.
[ 4283.426648] systemd-sysv-generator[12778]: Ignoring S01motd symlink in rc1.d, not generating motd.service.
[ 4283.427489] systemd-sysv-generator[12778]: Ignoring K02mdadm symlink in rc1.d, not generating mdadm.service.
[ 4283.428331] systemd-sysv-generator[12778]: Ignoring S02single symlink in rc1.d, not generating single.service.
[ 4283.429186] systemd-sysv-generator[12778]: Ignoring K01watchdog symlink in rc1.d, not generating watchdog.service.
[ 4283.430062] systemd-sysv-generator[12778]: Ignoring S77lkp-bootstrap symlink in rc2.d, not generating lkp-bootstrap.service.
[ 4283.431073] systemd-sysv-generator[12778]: Ignoring S15wd_keepalive symlink in rc2.d, not generating wd_keepalive.service.
[ 4283.431997] systemd-sysv-generator[12778]: Ignoring S01bootlogs symlink in rc2.d, not generating bootlogs.service.
[ 4283.432838] systemd-sysv-generator[12778]: Ignoring S15ssh symlink in rc2.d, not generating ssh.service.
[ 4283.433620] systemd-sysv-generator[12778]: Ignoring S15dbus symlink in rc2.d, not generating dbus.service.
[ 4283.435831] systemd-sysv-generator[12778]: Ignoring S16watchdog symlink in rc2.d, not generating watchdog.service.
[ 4283.438067] systemd-sysv-generator[12778]: Ignoring S01motd symlink in rc2.d, not generating motd.service.
[ 4283.440241] systemd-sysv-generator[12778]: Ignoring S16rmnologin symlink in rc2.d, not generating rmnologin.service.
[ 4283.442475] systemd-sysv-generator[12778]: Ignoring S15cron symlink in rc2.d, not generating cron.service.
[ 4283.444581] systemd-sysv-generator[12778]: Ignoring S01mdadm symlink in rc2.d, not generating mdadm.service.
[ 4283.446650] systemd-sysv-generator[12778]: Ignoring S15ipmievd symlink in rc2.d, not generating ipmievd.service.
[ 4283.448769] systemd-sysv-generator[12778]: Ignoring S16rc.local symlink in rc2.d, not generating rc.local.service.
[ 4283.450948] systemd-sysv-generator[12778]: Ignoring S15wd_keepalive symlink in rc3.d, not generating wd_keepalive.service.
[ 4283.453281] systemd-sysv-generator[12778]: Ignoring S01bootlogs symlink in rc3.d, not generating bootlogs.service.
[ 4283.455527] systemd-sysv-generator[12778]: Ignoring S15ssh symlink in rc3.d, not generating ssh.service.
[ 4283.457705] systemd-sysv-generator[12778]: Ignoring S15dbus symlink in rc3.d, not generating dbus.service.
[ 4283.459810] systemd-sysv-generator[12778]: Ignoring S16watchdog symlink in rc3.d, not generating watchdog.service.
[ 4283.462087] systemd-sysv-generator[12778]: Ignoring S01motd symlink in rc3.d, not generating motd.service.
[ 4283.464422] systemd-sysv-generator[12778]: Ignoring S16rmnologin symlink in rc3.d, not generating rmnologin.service.
[ 4283.466785] systemd-sysv-generator[12778]: Ignoring S15cron symlink in rc3.d, not generating cron.service.
[ 4283.469014] systemd-sysv-generator[12778]: Ignoring S01mdadm symlink in rc3.d, not generating mdadm.service.
[ 4283.471208] systemd-sysv-generator[12778]: Ignoring S15ipmievd symlink in rc3.d, not generating ipmievd.service.
[ 4283.473403] systemd-sysv-generator[12778]: Ignoring S16rc.local symlink in rc3.d, not generating rc.local.service.
[ 4283.475685] systemd-sysv-generator[12778]: Ignoring S15wd_keepalive symlink in rc4.d, not generating wd_keepalive.service.
[ 4283.477960] systemd-sysv-generator[12778]: Ignoring S01bootlogs symlink in rc4.d, not generating bootlogs.service.
[ 4283.480308] systemd-sysv-generator[12778]: Ignoring S15ssh symlink in rc4.d, not generating ssh.service.
[ 4283.482430] systemd-sysv-generator[12778]: Ignoring S15dbus symlink in rc4.d, not generating dbus.service.
[ 4283.484525] systemd-sysv-generator[12778]: Ignoring S16watchdog symlink in rc4.d, not generating watchdog.service.
[ 4283.486554] systemd-sysv-generator[12778]: Ignoring S01motd symlink in rc4.d, not generating motd.service.
[ 4283.488617] systemd-sysv-generator[12778]: Ignoring S16rmnologin symlink in rc4.d, not generating rmnologin.service.
[ 4283.490741] systemd-sysv-generator[12778]: Ignoring S15cron symlink in rc4.d, not generating cron.service.
[ 4283.492906] systemd-sysv-generator[12778]: Ignoring S01mdadm symlink in rc4.d, not generating mdadm.service.
[ 4283.494954] systemd-sysv-generator[12778]: Ignoring S15ipmievd symlink in rc4.d, not generating ipmievd.service.
[ 4283.496975] systemd-sysv-generator[12778]: Ignoring S16rc.local symlink in rc4.d, not generating rc.local.service.
[ 4283.499018] systemd-sysv-generator[12778]: Ignoring S15wd_keepalive symlink in rc5.d, not generating wd_keepalive.service.
[ 4283.501198] systemd-sysv-generator[12778]: Ignoring S01bootlogs symlink in rc5.d, not generating bootlogs.service.
[ 4283.503279] systemd-sysv-generator[12778]: Ignoring S15ssh symlink in rc5.d, not generating ssh.service.
[ 4283.505366] systemd-sysv-generator[12778]: Ignoring S15dbus symlink in rc5.d, not generating dbus.service.
[ 4283.507440] systemd-sysv-generator[12778]: Ignoring S16watchdog symlink in rc5.d, not generating watchdog.service.
[ 4283.509570] systemd-sysv-generator[12778]: Ignoring S01motd symlink in rc5.d, not generating motd.service.
[ 4283.511651] systemd-sysv-generator[12778]: Ignoring S16rmnologin symlink in rc5.d, not generating rmnologin.service.
[ 4283.513813] systemd-sysv-generator[12778]: Ignoring S15cron symlink in rc5.d, not generating cron.service.
[ 4283.515802] systemd-sysv-generator[12778]: Ignoring S01mdadm symlink in rc5.d, not generating mdadm.service.
[ 4283.517831] systemd-sysv-generator[12778]: Ignoring S15ipmievd symlink in rc5.d, not generating ipmievd.service.
[ 4283.519906] systemd-sysv-generator[12778]: Ignoring S16rc.local symlink in rc5.d, not generating rc.local.service.
[ 4283.521982] systemd-sysv-generator[12778]: Ignoring K02ipmievd symlink in rc0.d, not generating ipmievd.service.
[ 4283.524046] systemd-sysv-generator[12778]: Ignoring K09umountroot symlink in rc0.d, not generating umountroot.service.
[ 4283.526214] systemd-sysv-generator[12778]: Ignoring K10mdadm-waitidle symlink in rc0.d, not generating mdadm-waitidle.service.
[ 4283.529674] systemd-sysv-generator[12778]: Ignoring K11halt symlink in rc0.d, not generating halt.service.
[ 4283.531725] systemd-sysv-generator[12778]: Ignoring K04sendsigs symlink in rc0.d, not generating sendsigs.service.
[ 4283.533797] systemd-sysv-generator[12778]: Ignoring K02mdadm symlink in rc0.d, not generating mdadm.service.
[ 4283.535888] systemd-sysv-generator[12778]: Ignoring K08umountfs symlink in rc0.d, not generating umountfs.service.
[ 4283.537989] systemd-sysv-generator[12778]: Ignoring K05umountnfs.sh symlink in rc0.d, not generating umountnfs.service.
[ 4283.540096] systemd-sysv-generator[12778]: Ignoring K02urandom symlink in rc0.d, not generating urandom.service.
[ 4283.542440] systemd-sysv-generator[12778]: Ignoring K07hwclock.sh symlink in rc0.d, not generating hwclock.service.
[ 4283.544618] systemd-sysv-generator[12778]: Ignoring K01watchdog symlink in rc0.d, not generating watchdog.service.
[ 4283.546659] systemd-sysv-generator[12778]: Ignoring K02ipmievd symlink in rc6.d, not generating ipmievd.service.
[ 4283.548764] systemd-sysv-generator[12778]: Ignoring K09umountroot symlink in rc6.d, not generating umountroot.service.
[ 4283.550853] systemd-sysv-generator[12778]: Ignoring K10mdadm-waitidle symlink in rc6.d, not generating mdadm-waitidle.service.
[ 4283.554260] systemd-sysv-generator[12778]: Ignoring K04sendsigs symlink in rc6.d, not generating sendsigs.service.
[ 4283.556475] systemd-sysv-generator[12778]: Ignoring K12reboot symlink in rc6.d, not generating reboot.service.
[ 4283.558575] systemd-sysv-generator[12778]: Ignoring K02mdadm symlink in rc6.d, not generating mdadm.service.
[ 4283.560726] systemd-sysv-generator[12778]: Ignoring K08umountfs symlink in rc6.d, not generating umountfs.service.
[ 4283.562851] systemd-sysv-generator[12778]: Ignoring K05umountnfs.sh symlink in rc6.d, not generating umountnfs.service.
[ 4283.565050] systemd-sysv-generator[12778]: Ignoring K02urandom symlink in rc6.d, not generating urandom.service.
[ 4283.567118] systemd-sysv-generator[12778]: Ignoring K07hwclock.sh symlink in rc6.d, not generating hwclock.service.
[ 4283.569363] systemd-sysv-generator[12778]: Ignoring K01watchdog symlink in rc6.d, not generating watchdog.service.

BUG: kernel test hang
Elapsed time: 4315
qemu-system-x86_64 -enable-kvm -cpu Penryn -kernel /kernel/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/vmlinuz-3.19.0-00467-g66ba93c0 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml ARCH=x86_64 kconfig=x86_64-rhel branch=linus/master commit=66ba93c0d7fe63def447ad0afe380307ff9ebcad BOOT_IMAGE=/kernel/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/vmlinuz-3.19.0-00467-g66ba93c0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/ltp/syscalls/debian-x86_64-2015-02-07.cgz/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-2G-1::dhcp'  -initrd /fs/sdc1/initrd-vm-vp-2G-1 -m 2048 -smp 4 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sdc1/disk0-vm-vp-2G-1,media=disk,if=virtio -drive file=/fs/sdc1/disk1-vm-vp-2G-1,media=disk,if=virtio -drive file=/fs/sdc1/disk2-vm-vp-2G-1,media=disk,if=virtio -drive file=/fs/sdc1/disk3-vm-vp-2G-1,media=disk,if=virtio -drive file=/fs/sdc1/disk4-vm-vp-2G-1,media=disk,if=virtio -drive file=/fs/sdc1/disk5-vm-vp-2G-1,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-vp-2G-1 -serial file:/dev/shm/kboot/serial-vm-vp-2G-1 -daemonize -display none -monitor null 

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [fanotify] 66ba93c0d7f: i6300esb: Unexpected close, not stopping watchdog!
@ 2015-04-23  6:25 ` Huang Ying
  0 siblings, 0 replies; 7+ messages in thread
From: Huang Ying @ 2015-04-23  6:25 UTC (permalink / raw)
  To: lkp

[-- Attachment #1: Type: text/plain, Size: 1898 bytes --]

FYI, we noticed the below changes on

git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
commit 66ba93c0d7fe63def447ad0afe380307ff9ebcad ("fanotify: don't set FAN_ONDIR implicitly on a marks ignored mask")

When doing LTP test.  Test system hang after doing some fanotify test cases, while system
can run to reboot in the parent comments.

<<<test_start>>>
tag=fanotify01 stime=1429706735
cmdline="fanotify01"
contacts=""
analysis=exit
<<<test_output>>>
fanotify01    1  TPASS  :  get event: mask=31 pid=11237 fd=8
fanotify01    2  TPASS  :  get event: mask=11 pid=11237 fd=4294967294
fanotify01    3  TPASS  :  get event: mask=10 pid=11237 fd=4294967294
fanotify01    4  TPASS  :  get event: mask=2a pid=11237 fd=9
fanotify01    5  TPASS  :  get event: mask=a pid=11237 fd=4294967294
fanotify01    6  TPASS  :  get event: mask=8 pid=11237 fd=4294967294
fanotify01    7  TPASS  :  get event: mask=20 pid=11237 fd=11
fanotify01    8  TPASS  :  get event: mask=b pid=11237 fd=10
fanotify01    9  TPASS  :  get event: mask=9 pid=11237 fd=4294967294
fanotify01   10  TPASS  :  get event: mask=8 pid=11237 fd=4294967294
fanotify01   11  TPASS  :  get event: mask=2 pid=11237 fd=13
fanotify01   12  TPASS  :  get event: mask=8 pid=11237 fd=12
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fanotify02 stime=1429706735
cmdline="fanotify02"
contacts=""
analysis=exit
<<<test_output>>>
[ 4283.197601] i6300esb: Unexpected close, not stopping watchdog!
[ 4283.200494] systemd-journald[117]: Received SIGTERM from PID 624 (watchdog).
[ 4283.201894] systemd-journald[117]: systemd-journald stopped as pid 117


Thanks,
Ying Huang



_______________________________________________
LKP mailing list
LKP(a)linux.intel.com


[-- Attachment #2: config-3.19.0-00467-g66ba93c0 --]
[-- Type: text/plain, Size: 127550 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.19.0 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_GENERIC_MSI_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not set
# CONFIG_NO_HZ_FULL_SYSIDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_RCU_USER_QS=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_KTHREAD_PRIO=0
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INIT_FALLBACK=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
# CONFIG_MODULE_COMPRESS is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUE_RWLOCK=y
CONFIG_QUEUE_RWLOCK=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=500
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_UP_APIC_MSI=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MOVABLE_NODE=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
# CONFIG_PM_TRACE_RTC is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y

#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_GENEVE is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
CONFIG_NFT_CT=m
CONFIG_NFT_RBTREE=m
CONFIG_NFT_HASH=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
CONFIG_NFT_NAT=m
# CONFIG_NFT_QUEUE is not set
# CONFIG_NFT_REJECT is not set
CONFIG_NFT_COMPAT=m
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
# CONFIG_IP_SET_HASH_IPMARK is not set
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_MAC is not set
# CONFIG_IP_SET_HASH_NETPORTNET is not set
CONFIG_IP_SET_HASH_NET=m
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NF_REJECT_IPV4=m
# CONFIG_NFT_REJECT_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NF_REJECT_IPV6=m
# CONFIG_NFT_REJECT_IPV6 is not set
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
# CONFIG_NF_LOG_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_PORTS=8191
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_CLS_BPF is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
CONFIG_NET_MPLS_GSO=m
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set

#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_NVME=m
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RSXX=m

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085_I2C is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_LOGGING=y
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_MQ=m
CONFIG_DM_CACHE_CLEANER=m
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_DM_SWITCH=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_RING=m
CONFIG_VHOST=m

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_NET_DSA_MV88E6171 is not set
# CONFIG_NET_DSA_MV88E6352 is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_XGENE is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=y
# CONFIG_BNX2X is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_VXLAN=y
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
# CONFIG_I40E_VXLAN is not set
# CONFIG_I40E_DCB is not set
# CONFIG_I40E_FCOE is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_IP1000=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_EN_VXLAN=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_MLX5_CORE is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
# CONFIG_QLCNIC_VXLAN is not set
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=m
CONFIG_AMD_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=m
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=m
CONFIG_WLAN=y
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
# CONFIG_WL_TI is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_XEN_NETDEV_FRONTEND=m
# CONFIG_XEN_NETDEV_BACKEND is not set
CONFIG_VMXNET3=m
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set

#
# Active cards
#
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_FINTEK is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_SMB347=m
CONFIG_POWER_RESET=y
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_HTU21 is not set
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INT340X_THERMAL is not set

#
# Texas Instruments thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MENF21BMC is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y

#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
# CONFIG_IR_HIX5HD2 is not set
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=m
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW68 is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88TS2022=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_AS102_FE is not set

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y

#
# Direct Rendering Manager
#
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_ADV7511 is not set
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
# CONFIG_DRM_PTN3460 is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_I915_FBDEV=y
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
# CONFIG_DRM_BOCHS is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
CONFIG_SND_SCS1X=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_HUION is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_FSM is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_DELL_NETBOOKS=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_MCE_INJ is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_SYSTOHC is not set
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
# CONFIG_RTC_DRV_ISL12057 is not set
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF8563=m
# CONFIG_RTC_DRV_PCF85063 is not set
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_XGENE is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
# CONFIG_DW_DMAC_PCI is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_MF624 is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO=m
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SELFBALLOONING is not set
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_SCSI_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_COMEDI is not set
# CONFIG_PANEL is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_R8723AU is not set
# CONFIG_RTS5208 is not set
# CONFIG_LINE6_USB is not set
# CONFIG_FB_XGI is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_LUSTRE_FS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_CRYPTO_SKEIN is not set
# CONFIG_UNISYSSPAR is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_SMO8800 is not set
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_HP_ACCEL=m
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_IPS=m
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_PVPANIC=y
# CONFIG_CHROME_PLATFORMS is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_TI is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set

#
# DEVFREQ Drivers
#
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_UEFI_CPER=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set

#
# Runtime Testing
#
CONFIG_LKDTM=m
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=m
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
# CONFIG_CRYPTO_SHA1_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_DRBG_MENU is not set
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_MMU_AUDIT=y
# CONFIG_KVM_DEVICE_ASSIGNMENT is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_ARCH_HAS_SG_CHAIN=y

[-- Attachment #3: dmesg.ksh --]
[-- Type: text/plain, Size: 334206 bytes --]

early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.19.0-00467-g66ba93c0 (kbuild@cairo) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Wed Apr 22 20:35:58 CST 2015
[    0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml ARCH=x86_64 kconfig=x86_64-rhel branch=linus/master commit=66ba93c0d7fe63def447ad0afe380307ff9ebcad BOOT_IMAGE=/kernel/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/vmlinuz-3.19.0-00467-g66ba93c0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/ltp/syscalls/debian-x86_64-2015-02-07.cgz/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-2G-1::dhcp
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f0e60-0x000f0e6f] mapped at [ffff8800000f0e60]
[    0.000000]   mpc: f0e70-f0fac
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x021ef000, 0x021effff] PGTABLE
[    0.000000] BRK [0x021f0000, 0x021f0fff] PGTABLE
[    0.000000] BRK [0x021f1000, 0x021f1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x73e00000-0x73ffffff]
[    0.000000]  [mem 0x73e00000-0x73ffffff] page 2M
[    0.000000] BRK [0x021f2000, 0x021f2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x60000000-0x73dfffff]
[    0.000000]  [mem 0x60000000-0x73dfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[    0.000000]  [mem 0x40000000-0x5fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x74000000-0x7ffdffff]
[    0.000000]  [mem 0x74000000-0x7fdfffff] page 2M
[    0.000000]  [mem 0x7fe00000-0x7ffdffff] page 4k
[    0.000000] BRK [0x021f3000, 0x021f3fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x741af000-0x7ffd7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0BB0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000007FFE198F 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000007FFE0B37 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000007FFE0040 000AF7 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000007FFE0000 000040
[    0.000000] ACPI: SSDT 0x000000007FFE0BAB 000D1C (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x000000007FFE18C7 000090 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000007FFE1957 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff57c000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffdffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x74189000-0x741aefff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:74109001, primary cpu clock
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880071800000-ffff8800737fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0x7ffdffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7ffdffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x7ffdffff]
[    0.000000] On node 0 totalpages: 524158
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8128 pages used for memmap
[    0.000000]   DMA32 zone: 520160 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff57c000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff880073e00000 s89344 r8192 d29440 u524288
[    0.000000] pcpu-alloc: s89344 r8192 d29440 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 73e0e240
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515945
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml ARCH=x86_64 kconfig=x86_64-rhel branch=linus/master commit=66ba93c0d7fe63def447ad0afe380307ff9ebcad BOOT_IMAGE=/kernel/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/vmlinuz-3.19.0-00467-g66ba93c0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/ltp/syscalls/debian-x86_64-2015-02-07.cgz/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-2G-1::dhcp
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Memory: 1849248K/2096632K available (8909K kernel code, 1722K rwdata, 3956K rodata, 1840K init, 1876K bss, 247384K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.19.0-00467-g66ba93c0 (kbuild@cairo) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Wed Apr 22 20:35:58 CST 2015
[    0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml ARCH=x86_64 kconfig=x86_64-rhel branch=linus/master commit=66ba93c0d7fe63def447ad0afe380307ff9ebcad BOOT_IMAGE=/kernel/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/vmlinuz-3.19.0-00467-g66ba93c0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/ltp/syscalls/debian-x86_64-2015-02-07.cgz/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-2G-1::dhcp
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f0e60-0x000f0e6f] mapped at [ffff8800000f0e60]
[    0.000000]   mpc: f0e70-f0fac
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x021ef000, 0x021effff] PGTABLE
[    0.000000] BRK [0x021f0000, 0x021f0fff] PGTABLE
[    0.000000] BRK [0x021f1000, 0x021f1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x73e00000-0x73ffffff]
[    0.000000]  [mem 0x73e00000-0x73ffffff] page 2M
[    0.000000] BRK [0x021f2000, 0x021f2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x60000000-0x73dfffff]
[    0.000000]  [mem 0x60000000-0x73dfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[    0.000000]  [mem 0x40000000-0x5fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x74000000-0x7ffdffff]
[    0.000000]  [mem 0x74000000-0x7fdfffff] page 2M
[    0.000000]  [mem 0x7fe00000-0x7ffdffff] page 4k
[    0.000000] BRK [0x021f3000, 0x021f3fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x741af000-0x7ffd7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0BB0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000007FFE198F 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000007FFE0B37 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000007FFE0040 000AF7 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000007FFE0000 000040
[    0.000000] ACPI: SSDT 0x000000007FFE0BAB 000D1C (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x000000007FFE18C7 000090 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000007FFE1957 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff57c000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffdffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x74189000-0x741aefff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:74109001, primary cpu clock
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880071800000-ffff8800737fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0x7ffdffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7ffdffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x7ffdffff]
[    0.000000] On node 0 totalpages: 524158
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8128 pages used for memmap
[    0.000000]   DMA32 zone: 520160 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff57c000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff880073e00000 s89344 r8192 d29440 u524288
[    0.000000] pcpu-alloc: s89344 r8192 d29440 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 73e0e240
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515945
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml ARCH=x86_64 kconfig=x86_64-rhel branch=linus/master commit=66ba93c0d7fe63def447ad0afe380307ff9ebcad BOOT_IMAGE=/kernel/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/vmlinuz-3.19.0-00467-g66ba93c0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/ltp/syscalls/debian-x86_64-2015-02-07.cgz/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-2G-1::dhcp
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Memory: 1849248K/2096632K available (8909K kernel code, 1722K rwdata, 3956K rodata, 1840K init, 1876K bss, 247384K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] console [ttyS0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.002000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508)
[    0.002325] pid_max: default: 32768 minimum: 301
[    0.003027] ACPI: Core revision 20141107
[    0.005514] ACPI: All ACPI Tables successfully acquired
[    0.006128] Security Framework initialized
[    0.006785] SELinux:  Initializing.
[    0.007010] SELinux:  Starting in permissive mode
[    0.009008] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010335] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.011136] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.012007] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.014165] Initializing cgroup subsys blkio
[    0.015006] Initializing cgroup subsys memory
[    0.015688] Initializing cgroup subsys devices
[    0.016005] Initializing cgroup subsys freezer
[    0.017005] Initializing cgroup subsys net_cls
[    0.018005] Initializing cgroup subsys perf_event
[    0.018712] Initializing cgroup subsys hugetlb
[    0.019065] mce: CPU supports 10 MCE banks
[    0.020039] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.021003] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.022036] Freeing SMP alternatives memory: 36K (ffffffff8200f000 - ffffffff82018000)
[    0.026817] ftrace: allocating 31625 entries in 124 pages
[    0.034063] Getting VERSION: 1050014
[    0.034632] Getting VERSION: 1050014
[    0.035007] Getting ID: 0
[    0.035483] Getting ID: ff000000
[    0.036011] Getting LVT0: 8700
[    0.037005] Getting LVT1: 8400
[    0.037650] x2apic enabled
[    0.038003] Switched APIC routing to physical x2apic.
[    0.039210] enabled ExtINT on CPU#0
[    0.040499] ENABLING IO-APIC IRQs
[    0.041008] init IO_APIC IRQs
[    0.041464]  apic 0 pin 0 not connected
[    0.042009] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0)
[    0.043017] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
[    0.044015] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
[    0.045015] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0)
[    0.046016] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0)
[    0.047015] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:0)
[    0.048015] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:0)
[    0.049014] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:0)
[    0.050014] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0)
[    0.051014] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:0)
[    0.052014] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:0)
[    0.053015] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:0)
[    0.054015] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0)
[    0.055015] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:0)
[    0.056015] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:0)
[    0.057014] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:0)
[    0.058013]  apic 0 pin 16 not connected
[    0.059002]  apic 0 pin 17 not connected
[    0.059541]  apic 0 pin 18 not connected
[    0.060002]  apic 0 pin 19 not connected
[    0.060539]  apic 0 pin 20 not connected
[    0.061002]  apic 0 pin 21 not connected
[    0.061546]  apic 0 pin 22 not connected
[    0.062002]  apic 0 pin 23 not connected
[    0.063142] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064002] Using local APIC timer interrupts.
[    0.064002] calibrating APIC timer ...
[    0.066000] ... lapic delta = 6248770
[    0.066000] ... PM-Timer delta = 357884
[    0.066000] ... PM-Timer result ok
[    0.066000] ..... delta 6248770
[    0.066000] ..... mult: 268382627
[    0.066000] ..... calibration result: 999803
[    0.066000] ..... CPU clock speed is 2692.0974 MHz.
[    0.066000] ..... host bus clock speed is 999.0803 MHz.
[    0.066045] smpboot: CPU0: Intel Core 2 Duo P9xxx (Penryn Class Core 2) (fam: 06, model: 17, stepping: 03)
[    0.068029] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
[    0.070761] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.072114] x86: Booting SMP configuration:
[    0.072979] .... node  #0, CPUs:      #1
[    0.070751] kvm-clock: cpu 1, msr 0:74109041, secondary cpu clock
[    0.070751] masked ExtINT on CPU#1
[    0.087012] KVM setup async PF for cpu 1
[    0.088000]  #2
[    0.088000] kvm-stealtime: cpu 1, msr 73e8e240
[    0.087018] kvm-clock: cpu 2, msr 0:74109081, secondary cpu clock
[    0.087018] masked ExtINT on CPU#2
[    0.100008] KVM setup async PF for cpu 2
[    0.100735]  #3
[    0.100735] kvm-stealtime: cpu 2, msr 73f0e240
[    0.100013] kvm-clock: cpu 3, msr 0:741090c1, secondary cpu clock
[    0.100013] masked ExtINT on CPU#3
[    0.113016] x86: Booted up 1 node, 4 CPUs
[    0.113010] KVM setup async PF for cpu 3
[    0.113013] kvm-stealtime: cpu 3, msr 73f8e240
[    0.114639] smpboot: Total of 4 processors activated (21548.06 BogoMIPS)
[    0.116126] devtmpfs: initialized
[    0.118649] evm: security.selinux
[    0.119003] evm: security.ima
[    0.119467] evm: security.capability
[    0.120265] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.121169] NET: Registered protocol family 16
[    0.125009] cpuidle: using governor menu
[    0.125876] ACPI: bus type PCI registered
[    0.126003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.127092] PCI: Using configuration type 1 for base access
[    0.132086] ACPI: Added _OSI(Module Device)
[    0.133002] ACPI: Added _OSI(Processor Device)
[    0.133643] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.134002] ACPI: Added _OSI(Processor Aggregator Device)
[    0.135445] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:0)
[    0.137875] ACPI: Interpreter enabled
[    0.138006] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[    0.139422] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[    0.141013] ACPI: (supports S0 S3 S4 S5)
[    0.141595] ACPI: Using IOAPIC for interrupt routing
[    0.142015] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.146490] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.147007] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.148007] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.149109] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.150240] acpiphp: Slot [3] registered
[    0.151021] acpiphp: Slot [4] registered
[    0.152020] acpiphp: Slot [5] registered
[    0.152611] acpiphp: Slot [6] registered
[    0.153020] acpiphp: Slot [7] registered
[    0.153591] acpiphp: Slot [8] registered
[    0.154021] acpiphp: Slot [9] registered
[    0.154590] acpiphp: Slot [10] registered
[    0.155021] acpiphp: Slot [11] registered
[    0.156023] acpiphp: Slot [12] registered
[    0.156630] acpiphp: Slot [13] registered
[    0.157021] acpiphp: Slot [14] registered
[    0.157593] acpiphp: Slot [15] registered
[    0.158020] acpiphp: Slot [16] registered
[    0.159023] acpiphp: Slot [17] registered
[    0.159648] acpiphp: Slot [18] registered
[    0.160020] acpiphp: Slot [19] registered
[    0.160590] acpiphp: Slot [20] registered
[    0.161020] acpiphp: Slot [21] registered
[    0.162019] acpiphp: Slot [22] registered
[    0.162643] acpiphp: Slot [23] registered
[    0.163022] acpiphp: Slot [24] registered
[    0.163597] acpiphp: Slot [25] registered
[    0.164022] acpiphp: Slot [26] registered
[    0.165019] acpiphp: Slot [27] registered
[    0.165607] acpiphp: Slot [28] registered
[    0.166020] acpiphp: Slot [29] registered
[    0.166592] acpiphp: Slot [30] registered
[    0.167020] acpiphp: Slot [31] registered
[    0.168009] PCI host bridge to bus 0000:00
[    0.168620] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.169003] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.170002] pci_bus 0000:00: root bus resource [io  0x0d00-0xadff]
[    0.170761] pci_bus 0000:00: root bus resource [io  0xae0f-0xaeff]
[    0.171002] pci_bus 0000:00: root bus resource [io  0xaf20-0xafdf]
[    0.172002] pci_bus 0000:00: root bus resource [io  0xafe4-0xffff]
[    0.173002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.174002] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[    0.174888] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.175283] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.177107] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.186004] pci 0000:00:01.1: reg 0x20: [io  0xc1c0-0xc1cf]
[    0.190022] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.191003] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.192002] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.193002] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.194137] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.195241] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.196010] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.198030] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[    0.200007] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[    0.204007] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[    0.215007] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.216075] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.218004] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.221003] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.232004] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.233147] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.236003] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.239003] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.251176] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[    0.253004] pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0bf]
[    0.256003] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff]
[    0.267238] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000
[    0.270003] pci 0000:00:06.0: reg 0x10: [io  0xc0c0-0xc0ff]
[    0.272003] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff]
[    0.282256] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
[    0.285003] pci 0000:00:07.0: reg 0x10: [io  0xc100-0xc13f]
[    0.288004] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff]
[    0.300199] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000
[    0.303004] pci 0000:00:08.0: reg 0x10: [io  0xc140-0xc17f]
[    0.306003] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff]
[    0.318101] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000
[    0.320003] pci 0000:00:09.0: reg 0x10: [io  0xc180-0xc1bf]
[    0.323003] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff]
[    0.334226] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000
[    0.337003] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f]
[    0.349542] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.350646] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.351640] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.352608] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.353560] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.355274] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.356106] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.356737] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.357003] vgaarb: loaded
[    0.357457] vgaarb: bridge control possible 0000:00:02.0
[    0.358076] SCSI subsystem initialized
[    0.358647] ACPI: bus type USB registered
[    0.359020] usbcore: registered new interface driver usbfs
[    0.360010] usbcore: registered new interface driver hub
[    0.360738] usbcore: registered new device driver usb
[    0.361025] pps_core: LinuxPPS API ver. 1 registered
[    0.362002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.363007] PTP clock support registered
[    0.364068] PCI: Using ACPI for IRQ routing
[    0.364615] PCI: pci_cache_line_size set to 64 bytes
[    0.365134] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.366003] e820: reserve RAM buffer [mem 0x7ffe0000-0x7fffffff]
[    0.367118] NetLabel: Initializing
[    0.367629] NetLabel:  domain hash size = 128
[    0.368001] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.368660] NetLabel:  unlabeled traffic allowed by default
[    0.369131] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.370014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.371486] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.379031] Switched to clocksource kvm-clock
[    0.387927] pnp: PnP ACPI init
[    0.388461] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0)
[    0.389545] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.390366] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0)
[    0.391445] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.392251] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0)
[    0.393343] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.394256] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:0)
[    0.395326] pnp 00:03: [dma 2]
[    0.395809] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.396633] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:0)
[    0.397714] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.398532] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0)
[    0.399612] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.400587] pnp: PnP ACPI: found 6 devices
[    0.406668] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.407353] pci_bus 0000:00: resource 5 [io  0x0d00-0xadff]
[    0.408037] pci_bus 0000:00: resource 6 [io  0xae0f-0xaeff]
[    0.408706] pci_bus 0000:00: resource 7 [io  0xaf20-0xafdf]
[    0.409385] pci_bus 0000:00: resource 8 [io  0xafe4-0xffff]
[    0.410072] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
[    0.410804] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff]
[    0.411574] NET: Registered protocol family 2
[    0.412283] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.413277] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.414073] TCP: Hash tables configured (established 16384 bind 16384)
[    0.415197] TCP: reno registered
[    0.415669] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.416397] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.417199] NET: Registered protocol family 1
[    0.417991] RPC: Registered named UNIX socket transport module.
[    0.418724] RPC: Registered udp transport module.
[    0.419337] RPC: Registered tcp transport module.
[    0.419941] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.420753] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.421669] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.422730] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.423823] pci 0000:00:02.0: Video device with shadowed ROM
[    0.424902] PCI: CLS 0 bytes, default 64
[    0.425833] Unpacking initramfs...
[    3.285624] Freeing initrd memory: 194724K (ffff8800741af000 - ffff88007ffd8000)
[    3.288471] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    3.289870] Initialise system trusted keyring
[    3.290947] audit: initializing netlink subsys (disabled)
[    3.292162] audit: type=2000 audit(1429706388.739:1): initialized
[    3.293879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.297225] zpool: loaded
[    3.297911] zbud: loaded
[    3.298825] VFS: Disk quotas dquot_6.5.2
[    3.299737] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.301700] SGI XFS with ACLs, security attributes, no debug enabled
[    3.303551] 9p: Installing v9fs 9p2000 file system support
[    3.304752] Key type big_key registered
[    3.305605] SELinux:  Registering netfilter hooks
[    3.308086] NET: Registered protocol family 38
[    3.309075] Key type asymmetric registered
[    3.309983] Asymmetric key parser 'x509' registered
[    3.311059] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    3.312738] io scheduler noop registered
[    3.313685] io scheduler deadline registered (default)
[    3.314914] io scheduler cfq registered
[    3.316018] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.317253] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    3.318644] intel_idle: does not run on family 6 model 23
[    3.319914] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    3.321678] ACPI: Power Button [PWRF]
[    3.322933] GHES: HEST is not enabled!
[    3.354729] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    3.355548] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:0)
[    3.381983] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    3.382758] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:0)
[    3.409192] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    3.435213] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    3.486114] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.511102] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.512741] Non-volatile memory driver v1.3
[    3.513400] Linux agpgart interface v0.103
[    3.515423]  vda: unknown partition table
[    3.516889]  vdb: unknown partition table
[    3.518355]  vdc: unknown partition table
[    3.520439]  vdd: unknown partition table
[    3.521889]  vde: unknown partition table
[    3.523148]  vdf: unknown partition table
[    3.523872] rdac: device handler registered
[    3.524583] hp_sw: device handler registered
[    3.525244] emc: device handler registered
[    3.525867] alua: device handler registered
[    3.526535] libphy: Fixed MDIO Bus: probed
[    3.527200] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    3.528132] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    3.857807] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    3.858800] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    3.859737] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    3.860518] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    3.861320] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
[    3.862214] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.862971] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.0.1-k
[    3.864063] ixgbe: Copyright (c) 1999-2014 Intel Corporation.
[    3.864885] usbcore: registered new interface driver catc
[    3.865623] usbcore: registered new interface driver kaweth
[    3.866382] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    3.867464] usbcore: registered new interface driver pegasus
[    3.868235] usbcore: registered new interface driver rtl8150
[    3.869012] usbcore: registered new interface driver asix
[    3.869747] usbcore: registered new interface driver cdc_ether
[    3.871320] usbcore: registered new interface driver cdc_eem
[    3.872086] usbcore: registered new interface driver dm9601
[    3.872838] usbcore: registered new interface driver smsc75xx
[    3.873611] usbcore: registered new interface driver smsc95xx
[    3.874392] usbcore: registered new interface driver gl620a
[    3.875153] usbcore: registered new interface driver net1080
[    3.875910] usbcore: registered new interface driver plusb
[    3.876655] usbcore: registered new interface driver rndis_host
[    3.877457] usbcore: registered new interface driver cdc_subset
[    3.878255] usbcore: registered new interface driver zaurus
[    3.879017] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    3.880098] usbcore: registered new interface driver int51x1
[    3.880944] usbcore: registered new interface driver ipheth
[    3.881704] usbcore: registered new interface driver sierra_net
[    3.882562] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.883423] ehci-pci: EHCI PCI platform driver
[    3.884075] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.884881] ohci-pci: OHCI PCI platform driver
[    3.885520] uhci_hcd: USB Universal Host Controller Interface driver
[    3.886397] usbcore: registered new interface driver usbserial
[    3.887183] usbcore: registered new interface driver usbserial_generic
[    3.888027] usbserial: USB Serial support registered for generic
[    3.888832] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    3.890605] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.891521] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.892445] mousedev: PS/2 mouse device common for all mice
[    3.893670] rtc_cmos 00:00: RTC can wake from S4
[    3.894592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    3.896051] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    3.897111] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    3.898063] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05
[    3.899115] i6300esb: initialized (0xffffc900003e0000). heartbeat=30 sec (nowayout=0)
[    3.900251] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.901062] iTCO_vendor_support: vendor-support=0
[    3.901889] hidraw: raw HID events driver (C) Jiri Kosina
[    3.902925] usbcore: registered new interface driver usbhid
[    3.903673] usbhid: USB HID core driver
[    3.904334] drop_monitor: Initializing network drop monitor service
[    3.905780] TCP: cubic registered
[    3.906352] Initializing XFRM netlink socket
[    3.907280] NET: Registered protocol family 10
[    3.908466] NET: Registered protocol family 17
[    3.909135] 9pnet: Installing 9P2000 support
[    3.910085] ... APIC ID:      00000000 (0)
[    3.910695] ... APIC VERSION: 01050014
[    3.911005] 0000000000000000000000000000000000000000000000000000000000000000
[    3.911005] 000000000e200000000000000000000000000000000000000000000000000000
[    3.911005] 0000000001000000000000000000000000000000000000000000000000008000
[    3.911005] 
[    3.915889] number of MP IRQ sources: 15.
[    3.916562] number of IO-APIC #0 registers: 24.
[    3.917220] testing the IO APIC.......................
[    3.917935] IO APIC #0......
[    3.918418] .... register #00: 00000000
[    3.918989] .......    : physical APIC id: 00
[    3.919609] .......    : Delivery Type: 0
[    3.920239] .......    : LTS          : 0
[    3.920826] .... register #01: 00170011
[    3.921405] .......     : max redirection entries: 17
[    3.922100] .......     : PRQ implemented: 0
[    3.922708] .......     : IO APIC version: 11
[    3.923340] .... register #02: 00000000
[    3.923910] .......     : arbitration: 00
[    3.924513] .... IRQ redirection table:
[    3.925108] 1    0    0   0   0    0    0    00
[    3.925755] 0    0    0   0   0    0    0    31
[    3.926431] 0    0    0   0   0    0    0    30
[    3.927117] 0    0    0   0   0    0    0    33
[    3.927765] 1    0    0   0   0    0    0    34
[    3.928456] 1    1    0   0   0    0    0    35
[    3.929122] 0    0    0   0   0    0    0    36
[    3.929770] 0    0    0   0   0    0    0    37
[    3.930423] 0    0    0   0   0    0    0    38
[    3.931085] 0    1    0   0   0    0    0    39
[    3.931789] 1    1    0   0   0    0    0    3A
[    3.932441] 1    1    0   0   0    0    0    3B
[    3.933095] 0    0    0   0   0    0    0    3C
[    3.933742] 0    0    0   0   0    0    0    3D
[    3.934401] 0    0    0   0   0    0    0    3E
[    3.935065] 0    0    0   0   0    0    0    3F
[    3.935718] 1    0    0   0   0    0    0    00
[    3.936374] 1    0    0   0   0    0    0    00
[    3.937032] 1    0    0   0   0    0    0    00
[    3.937681] 1    0    0   0   0    0    0    00
[    3.938337] 1    0    0   0   0    0    0    00
[    3.938985] 1    0    0   0   0    0    0    00
[    3.939637] 1    0    0   0   0    0    0    00
[    3.940324] 1    0    0   0   0    0    0    00
[    3.940976] IRQ to pin mappings:
[    3.941494] IRQ0 -> 0:2
[    3.942066] IRQ1 -> 0:1
[    3.942632] IRQ3 -> 0:3
[    3.943229] IRQ4 -> 0:4
[    3.943909] IRQ5 -> 0:5
[    3.944519] IRQ6 -> 0:6
[    3.945106] IRQ7 -> 0:7
[    3.945682] IRQ8 -> 0:8
[    3.946276] IRQ9 -> 0:9
[    3.946861] IRQ10 -> 0:10
[    3.947472] IRQ11 -> 0:11
[    3.948079] IRQ12 -> 0:12
[    3.948683] IRQ13 -> 0:13
[    3.949289] IRQ14 -> 0:14
[    3.949885] IRQ15 -> 0:15
[    3.950488] .................................... done.
[    3.951424] Loading compiled-in X.509 certificates
[    3.952877] Loaded X.509 cert 'Magrathea: Glacier signing key: b2161fbca36d922d04d0b311a071a03964ce7490'
[    3.954221] registered taskstats version 1
[    3.956589] Key type trusted registered
[    3.960110] Key type encrypted registered
[    3.960717] ima: No TPM chip found, activating TPM-bypass!
[    3.961498] evm: HMAC attrs: 0x1
[    3.962609] rtc_cmos 00:00: setting system clock to 2015-04-22 20:39:49 UTC (1429735189)
[    3.966091] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.288095] tsc: Refined TSC clocksource calibration: 2693.505 MHz
[    4.741845] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    5.968511] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[    5.970619] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.981026] Sending DHCP requests ., OK
[    5.987037] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[    5.988306] IP-Config: Complete:
[    5.988836]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[    5.990122]      host=vm-vp-2G-1, domain=, nis-domain=(none)
[    5.990876]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=
[    5.991547]      nameserver0=10.0.2.3
[    5.992409] PM: Hibernation image not present or could not be loaded.
[    5.993945] Freeing unused kernel memory: 1840K (ffffffff81e43000 - ffffffff8200f000)
[    5.996545] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
[    5.998215] random: systemd urandom read with 7 bits of entropy available
[    6.013447] systemd-default-display-manager-generator[96]: No /etc/X11/default-display-manager file, nothing to generate
[    6.016703] systemd-gpt-auto-generator[97]: Root file system not on a (single) block device.
[    6.019214] systemd-fstab-generator[98]: Parsing /etc/fstab
[    6.021086] systemd-rc-local-generator[99]: Automatically adding rc-local.service.
[    6.023681] systemd-sysv-generator[100]: Looking for unit files in (higher priority first):
[    6.023695] systemd-sysv-generator[100]: Looking for SysV init scripts in:
[    6.023698] systemd-sysv-generator[100]: Looking for SysV rcN.d links in:
[    6.024610] systemd-sysv-generator[100]: Ignoring S03mountdevsubfs.sh symlink in rcS.d, not generating mountdevsubfs.service.
[    6.024613] systemd-sysv-generator[100]: Ignoring S10udev-finish symlink in rcS.d, not generating udev-finish.service.
[    6.024616] systemd-sysv-generator[100]: Ignoring S16x11-common symlink in rcS.d, not generating x11-common.service.
[    6.024618] systemd-sysv-generator[100]: Ignoring S10procps symlink in rcS.d, not generating procps.service.
[    6.024620] systemd-sysv-generator[100]: Ignoring S14mountnfs.sh symlink in rcS.d, not generating mountnfs.service.
[    6.024622] systemd-sysv-generator[100]: Ignoring S15mountnfs-bootclean.sh symlink in rcS.d, not generating mountnfs-bootclean.service.
[    6.024625] systemd-sysv-generator[100]: Ignoring S07checkroot-bootclean.sh symlink in rcS.d, not generating checkroot-bootclean.service.
[    6.024627] systemd-sysv-generator[100]: Ignoring S05checkroot.sh symlink in rcS.d, not generating checkroot.service.
[    6.024631] systemd-sysv-generator[100]: Ignoring S04hwclock.sh symlink in rcS.d, not generating hwclock.service.
[    6.024634] systemd-sysv-generator[100]: Ignoring S09mountall-bootclean.sh symlink in rcS.d, not generating mountall-bootclean.service.
[    6.024636] systemd-sysv-generator[100]: Ignoring S10urandom symlink in rcS.d, not generating urandom.service.
[    6.024638] systemd-sysv-generator[100]: Ignoring S07kmod symlink in rcS.d, not generating kmod.service.
[    6.024640] systemd-sysv-generator[100]: Ignoring S16bootmisc.sh symlink in rcS.d, not generating bootmisc.service.
[    6.024642] systemd-sysv-generator[100]: Ignoring S01mountkernfs.sh symlink in rcS.d, not generating mountkernfs.service.
[    6.024644] systemd-sysv-generator[100]: Ignoring S01hostname.sh symlink in rcS.d, not generating hostname.service.
[    6.024645] systemd-sysv-generator[100]: Ignoring S02udev symlink in rcS.d, not generating udev.service.
[    6.024648] systemd-sysv-generator[100]: Ignoring S06checkfs.sh symlink in rcS.d, not generating checkfs.service.
[    6.024650] systemd-sysv-generator[100]: Ignoring S08mountall.sh symlink in rcS.d, not generating mountall.service.
[    6.024658] systemd-sysv-generator[100]: Ignoring K02ipmievd symlink in rc1.d, not generating ipmievd.service.
[    6.024660] systemd-sysv-generator[100]: Ignoring S01bootlogs symlink in rc1.d, not generating bootlogs.service.
[    6.024662] systemd-sysv-generator[100]: Ignoring S01killprocs symlink in rc1.d, not generating killprocs.service.
[    6.024664] systemd-sysv-generator[100]: Ignoring S01motd symlink in rc1.d, not generating motd.service.
[    6.024666] systemd-sysv-generator[100]: Ignoring K02mdadm symlink in rc1.d, not generating mdadm.service.
[    6.024669] systemd-sysv-generator[100]: Ignoring S02single symlink in rc1.d, not generating single.service.
[    6.024673] systemd-sysv-generator[100]: Ignoring K01watchdog symlink in rc1.d, not generating watchdog.service.
[    6.024682] systemd-sysv-generator[100]: Ignoring S77lkp-bootstrap symlink in rc2.d, not generating lkp-bootstrap.service.
[    6.024685] systemd-sysv-generator[100]: Ignoring S15wd_keepalive symlink in rc2.d, not generating wd_keepalive.service.
[    6.024687] systemd-sysv-generator[100]: Ignoring S01bootlogs symlink in rc2.d, not generating bootlogs.service.
[    6.024690] systemd-sysv-generator[100]: Ignoring S15ssh symlink in rc2.d, not generating ssh.service.
[    6.024692] systemd-sysv-generator[100]: Ignoring S15dbus symlink in rc2.d, not generating dbus.service.
[    6.024695] systemd-sysv-generator[100]: Ignoring S16watchdog symlink in rc2.d, not generating watchdog.service.
[    6.024697] systemd-sysv-generator[100]: Ignoring S01motd symlink in rc2.d, not generating motd.service.
[    6.024700] systemd-sysv-generator[100]: Ignoring S16rmnologin symlink in rc2.d, not generating rmnologin.service.
[    6.024702] systemd-sysv-generator[100]: Ignoring S15cron symlink in rc2.d, not generating cron.service.
[    6.024704] systemd-sysv-generator[100]: Ignoring S01mdadm symlink in rc2.d, not generating mdadm.service.
[    6.024706] systemd-sysv-generator[100]: Ignoring S15ipmievd symlink in rc2.d, not generating ipmievd.service.
[    6.024708] systemd-sysv-generator[100]: Ignoring S16rc.local symlink in rc2.d, not generating rc.local.service.
[    6.024717] systemd-sysv-generator[100]: Ignoring S15wd_keepalive symlink in rc3.d, not generating wd_keepalive.service.
[    6.024719] systemd-sysv-generator[100]: Ignoring S01bootlogs symlink in rc3.d, not generating bootlogs.service.
[    6.024722] systemd-sysv-generator[100]: Ignoring S15ssh symlink in rc3.d, not generating ssh.service.
[    6.024724] systemd-sysv-generator[100]: Ignoring S15dbus symlink in rc3.d, not generating dbus.service.
[    6.024727] systemd-sysv-generator[100]: Ignoring S16watchdog symlink in rc3.d, not generating watchdog.service.
[    6.024729] systemd-sysv-generator[100]: Ignoring S01motd symlink in rc3.d, not generating motd.service.
[    6.024732] systemd-sysv-generator[100]: Ignoring S16rmnologin symlink in rc3.d, not generating rmnologin.service.
[    6.024734] systemd-sysv-generator[100]: Ignoring S15cron symlink in rc3.d, not generating cron.service.
[    6.024736] systemd-sysv-generator[100]: Ignoring S01mdadm symlink in rc3.d, not generating mdadm.service.
[    6.024738] systemd-sysv-generator[100]: Ignoring S15ipmievd symlink in rc3.d, not generating ipmievd.service.
[    6.024740] systemd-sysv-generator[100]: Ignoring S16rc.local symlink in rc3.d, not generating rc.local.service.
[    6.024749] systemd-sysv-generator[100]: Ignoring S15wd_keepalive symlink in rc4.d, not generating wd_keepalive.service.
[    6.024751] systemd-sysv-generator[100]: Ignoring S01bootlogs symlink in rc4.d, not generating bootlogs.service.
[    6.024754] systemd-sysv-generator[100]: Ignoring S15ssh symlink in rc4.d, not generating ssh.service.
[    6.024756] systemd-sysv-generator[100]: Ignoring S15dbus symlink in rc4.d, not generating dbus.service.
[    6.024759] systemd-sysv-generator[100]: Ignoring S16watchdog symlink in rc4.d, not generating watchdog.service.
[    6.024761] systemd-sysv-generator[100]: Ignoring S01motd symlink in rc4.d, not generating motd.service.
[    6.024764] systemd-sysv-generator[100]: Ignoring S16rmnologin symlink in rc4.d, not generating rmnologin.service.
[    6.024766] systemd-sysv-generator[100]: Ignoring S15cron symlink in rc4.d, not generating cron.service.
[    6.024768] systemd-sysv-generator[100]: Ignoring S01mdadm symlink in rc4.d, not generating mdadm.service.
[    6.024769] systemd-sysv-generator[100]: Ignoring S15ipmievd symlink in rc4.d, not generating ipmievd.service.
[    6.024772] systemd-sysv-generator[100]: Ignoring S16rc.local symlink in rc4.d, not generating rc.local.service.
[    6.024780] systemd-sysv-generator[100]: Ignoring S15wd_keepalive symlink in rc5.d, not generating wd_keepalive.service.
[    6.024782] systemd-sysv-generator[100]: Ignoring S01bootlogs symlink in rc5.d, not generating bootlogs.service.
[    6.024786] systemd-sysv-generator[100]: Ignoring S15ssh symlink in rc5.d, not generating ssh.service.
[    6.024787] systemd-sysv-generator[100]: Ignoring S15dbus symlink in rc5.d, not generating dbus.service.
[    6.024791] systemd-sysv-generator[100]: Ignoring S16watchdog symlink in rc5.d, not generating watchdog.service.
[    6.024792] systemd-sysv-generator[100]: Ignoring S01motd symlink in rc5.d, not generating motd.service.
[    6.024795] systemd-sysv-generator[100]: Ignoring S16rmnologin symlink in rc5.d, not generating rmnologin.service.
[    6.024797] systemd-sysv-generator[100]: Ignoring S15cron symlink in rc5.d, not generating cron.service.
[    6.024799] systemd-sysv-generator[100]: Ignoring S01mdadm symlink in rc5.d, not generating mdadm.service.
[    6.024807] systemd-sysv-generator[100]: Ignoring S15ipmievd symlink in rc5.d, not generating ipmievd.service.
[    6.024812] systemd-sysv-generator[100]: Ignoring S16rc.local symlink in rc5.d, not generating rc.local.service.
[    6.024823] systemd-sysv-generator[100]: Ignoring K02ipmievd symlink in rc0.d, not generating ipmievd.service.
[    6.024826] systemd-sysv-generator[100]: Ignoring K09umountroot symlink in rc0.d, not generating umountroot.service.
[    6.024829] systemd-sysv-generator[100]: Ignoring K10mdadm-waitidle symlink in rc0.d, not generating mdadm-waitidle.service.
[    6.024831] systemd-sysv-generator[100]: Ignoring K11halt symlink in rc0.d, not generating halt.service.
[    6.024833] systemd-sysv-generator[100]: Ignoring K04sendsigs symlink in rc0.d, not generating sendsigs.service.
[    6.024835] systemd-sysv-generator[100]: Ignoring K02mdadm symlink in rc0.d, not generating mdadm.service.
[    6.024837] systemd-sysv-generator[100]: Ignoring K08umountfs symlink in rc0.d, not generating umountfs.service.
[    6.024840] systemd-sysv-generator[100]: Ignoring K05umountnfs.sh symlink in rc0.d, not generating umountnfs.service.
[    6.024842] systemd-sysv-generator[100]: Ignoring K02urandom symlink in rc0.d, not generating urandom.service.
[    6.024845] systemd-sysv-generator[100]: Ignoring K07hwclock.sh symlink in rc0.d, not generating hwclock.service.
[    6.024847] systemd-sysv-generator[100]: Ignoring K01watchdog symlink in rc0.d, not generating watchdog.service.
[    6.024856] systemd-sysv-generator[100]: Ignoring K02ipmievd symlink in rc6.d, not generating ipmievd.service.
[    6.024859] systemd-sysv-generator[100]: Ignoring K09umountroot symlink in rc6.d, not generating umountroot.service.
[    6.024862] systemd-sysv-generator[100]: Ignoring K10mdadm-waitidle symlink in rc6.d, not generating mdadm-waitidle.service.
[    6.024864] systemd-sysv-generator[100]: Ignoring K04sendsigs symlink in rc6.d, not generating sendsigs.service.
[    6.024866] systemd-sysv-generator[100]: Ignoring K12reboot symlink in rc6.d, not generating reboot.service.
[    6.024868] systemd-sysv-generator[100]: Ignoring K02mdadm symlink in rc6.d, not generating mdadm.service.
[    6.024870] systemd-sysv-generator[100]: Ignoring K08umountfs symlink in rc6.d, not generating umountfs.service.
[    6.024873] systemd-sysv-generator[100]: Ignoring K05umountnfs.sh symlink in rc6.d, not generating umountnfs.service.
[    6.024875] systemd-sysv-generator[100]: Ignoring K02urandom symlink in rc6.d, not generating urandom.service.
[    6.024878] systemd-sysv-generator[100]: Ignoring K07hwclock.sh symlink in rc6.d, not generating hwclock.service.
[    6.024881] systemd-sysv-generator[100]: Ignoring K01watchdog symlink in rc6.d, not generating watchdog.service.
[    6.290840] systemd-journald[117]: Fixed max_use=99.8M max_size=12.4M min_size=4.0M keep_free=149.8M
[    6.291849] systemd-journald[117]: Reserving 22734 entries in hash table.
[    6.292119] systemd-journald[117]: Vacuuming...
[    6.292129] systemd-journald[117]: Vacuuming done, freed 0 bytes
[    6.292239] systemd-journald[117]: Flushing /dev/kmsg...
[    6.292979] systemd-journald[117]: Compressed data object 905 -> 612
[    6.295306] systemd-journald[117]: Compressed data object 912 -> 616
[    6.305853] systemd-journald[117]: systemd-journald running as pid 117
[    6.345285] systemd-udevd[137]: starting version 215
[    6.374921] parport_pc 00:04: reported by Plug and Play ACPI
[    6.376311] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    6.378086] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[    6.380151] systemd-journald[117]: Received request to flush runtime journal from PID 1
[    6.381458] systemd-journald[117]: Vacuuming...
[    6.382127] systemd-journald[117]: Vacuuming done, freed 0 bytes
[    6.402051] microcode: CPU0 sig=0x10673, pf=0x1, revision=0x1
[    6.403706] microcode: CPU1 sig=0x10673, pf=0x1, revision=0x1
[    6.404508] microcode: CPU2 sig=0x10673, pf=0x1, revision=0x1
[    6.405330] microcode: CPU3 sig=0x10673, pf=0x1, revision=0x1
[    6.406416] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    6.414602] [drm] Initialized drm 1.1.0 20060810
[    6.414683] Floppy drive(s): fd0 is 1.44M
[    6.416683] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    6.417814] libata version 3.00 loaded.
[    6.419790] ata_piix 0000:00:01.1: version 2.13
[    6.426748] FDC 0 is a S82078B
[    6.433312] scsi host0: ata_piix
[    6.435092] scsi host1: ata_piix
[    6.435131] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1c0 irq 14
[    6.435134] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1c8 irq 15

==> /tmp/lkp/stdout <==

==> /tmp/lkp/stderr <==
[    6.445211] Error: Driver 'pcspkr' is already registered, aborting...
[    6.446978] ppdev: user-space parallel port driver
[    6.453834] [TTM] Zone  kernel: Available graphics memory: 1022924 kiB
[    6.454717] [TTM] Initializing pool allocator
LKP: HOSTNAME , MAC 52:54:00:12:34:56, kernel 3.19.0-00467-g66ba93c0 1, serial console /dev/ttyS0

==> /tmp/lkp/stdout <==
Kernel tests: Boot OK!
[    6.457307] [TTM] Initializing DMA pool allocator
[    6.457561] [drm] fb mappable at 0xFC000000
[    6.457562] [drm] vram aper at 0xFC000000
[    6.457562] [drm] size 33554432
[    6.457562] [drm] fb depth is 24
[    6.457563] [drm]    pitch is 3072
[    6.463817] fbcon: cirrusdrmfb (fb0) is primary device
[    6.477103] Console: switching to colour frame buffer device 128x48
[    6.486157] cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device
[    6.486158] cirrus 0000:00:02.0: registered panic notifier
[    6.496164] [drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0
[    6.586409] ata2.01: NODEV after polling detection
[    6.587069] ata2.00: ATAPI: QEMU DVD-ROM, 2.1.2, max UDMA/100
[    6.588706] ata2.00: configured for MWDMA2
[    6.590371] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.1. PQ: 0 ANSI: 5
[    6.609548] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    6.611515] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.613229] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    6.616940] sr 1:0:0:0: Attached scsi generic sg0 type 5
22 Apr 20:40:48 ntpdate[294]: step time server 192.168.1.1 offset 50.377600 sec
/lkp/lkp/src/bin/run-lkp
RESULT_ROOT=/result/vm-vp-2G/ltp/syscalls/debian-x86_64-2015-02-07.cgz/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/0
job=/lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml
[   12.584827] Key type dns_resolver registered
[   12.593542] NFS: Registering the id_resolver key type
[   12.594013] Key type id_resolver registered
[   12.594356] Key type id_legacy registered
run-job /lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml
2015-04-22 20:40:49 ./runltp -f syscalls
INFO: creating /lkp/benchmarks/ltp/output directory
INFO: creating /lkp/benchmarks/ltp/results directory
Checking for required user/group ids

'nobody' user id and group found.
'bin' user id and group found.
'daemon' user id and group found.
Users group found.
Sys group found.
Required users/groups exist.
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
 
PRETTY_NAME="Debian GNU/Linux 8 (jessie)"
NAME="Debian GNU/Linux"
VERSION_ID="8"
VERSION="8 (jessie)"
ID=debian
HOME_URL="http://www.debian.org/"
SUPPORT_URL="http://www.debian.org/support/"
BUG_REPORT_URL="https://bugs.debian.org/"
Linux vm-vp-2G-1 3.19.0-00467-g66ba93c0 #1 SMP Wed Apr 22 20:35:58 CST 2015 x86_64 GNU/Linux
 
Gnu C                 
util-linux             linux 2.25.2
mount                  linux 2.25.2 (libmount 2.25.0: selinux, assert, debug)
modutils               18
e2fsprogs              1.42.12
Linux C Library        > libc.2.19
Dynamic linker (ldd)   2.19

==> /tmp/lkp/stderr <==
/usr/bin/ldd: line 41: printf: write error: Broken pipe
/usr/bin/ldd: line 43: printf: write error: Broken pipe

==> /tmp/lkp/stdout <==
Procps                 3.3.10
Net-tools              1.60
iproute2              iproute2-ss140804
Kbd                    69:
Sh-utils               8.23
Modules Loaded         rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver sg sr_mod cdrom ata_generic pata_acpi cirrus syscopyarea sysfillrect sysimgblt ttm ppdev snd_pcm drm_kms_helper snd_timer snd ata_piix soundcore pcspkr libata serio_raw floppy drm microcode i2c_piix4 parport_pc parport

free reports:
              total        used        free      shared  buff/cache   available
Mem:        2045848       35604     1339736        8564      670508     1859396
Swap:             0           0           0

/proc/cpuinfo
power management:

power management:

power management:

power management:

[   13.996355] loop: module loaded
no big block device was specified on commandline.
Tests which require a big block device are disabled.
You can specify it with option -z
COMMAND:    /lkp/benchmarks/ltp/bin/ltp-pan  -e -S   -a 390     -n 390  -p  -f /tmp/ltp-IiL6bmTun7/alltests -l /lkp/benchmarks/ltp/results/LTP_RUN_ON-2015_04_22-20h_40m_49s.log  -C /lkp/benchmarks/ltp/output/LTP_RUN_ON-2015_04_22-20h_40m_49s.failed -T /lkp/benchmarks/ltp/output/LTP_RUN_ON-2015_04_22-20h_40m_49s.tconf
LOG File: /lkp/benchmarks/ltp/results/LTP_RUN_ON-2015_04_22-20h_40m_49s.log
FAILED COMMAND File: /lkp/benchmarks/ltp/output/LTP_RUN_ON-2015_04_22-20h_40m_49s.failed
TCONF COMMAND File: /lkp/benchmarks/ltp/output/LTP_RUN_ON-2015_04_22-20h_40m_49s.tconf
Running tests.......
<<<test_start>>>
tag=abort01 stime=1429706449
cmdline="abort01"
contacts=""
analysis=exit
<<<test_output>>>
abort01     0  TINFO  :  Adjusting RLIMIT_CORE to 1048576
abort01     1  TPASS  :  abort dumped core
abort01     2  TPASS  :  abort raised SIGIOT
abort01     3  TPASS  :  abort dumped core
abort01     4  TPASS  :  abort raised SIGIOT
abort01     5  TPASS  :  abort dumped core
abort01     6  TPASS  :  abort raised SIGIOT
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=accept01 stime=1429706449
cmdline="accept01"
contacts=""
analysis=exit
<<<test_output>>>
accept01    1  TPASS  :  bad file descriptor successful
accept01    2  TPASS  :  bad file descriptor successful
accept01    3  TPASS  :  invalid socket buffer successful
accept01    4  TPASS  :  invalid salen successful
accept01    5  TPASS  :  invalid salen successful
accept01    6  TPASS  :  no queued connections successful
accept01    7  TPASS  :  UDP accept successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=accept4_01 stime=1429706449
cmdline="accept4_01"
contacts=""
analysis=exit
<<<test_output>>>
accept04_01    1  TPASS  :  Test passed
accept04_01    2  TPASS  :  Test passed
accept04_01    3  TPASS  :  Test passed
accept04_01    4  TPASS  :  Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=access01 stime=1429706449
cmdline="access01"
contacts=""
analysis=exit
<<<test_output>>>
access01    1  TPASS  :  access(accessfile, F_OK) returned 0
access01    2  TPASS  :  access(accessfile, X_OK) returned 0
access01    3  TPASS  :  access(accessfile, W_OK) returned 0
access01    4  TPASS  :  access(accessfile, R_OK) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=access02 stime=1429706449
cmdline="access02"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=access03 stime=1429706449
cmdline="access03"
contacts=""
analysis=exit
<<<test_output>>>
access03    1  TPASS  :  access(0x7fa08a11f000, R_OK) failed as expected with EFAULT
access03    2  TPASS  :  access(0x7fa08a11f000, W_OK) failed as expected with EFAULT
access03    3  TPASS  :  access(0x7fa08a11f000, X_OK) failed as expected with EFAULT
access03    4  TPASS  :  access(0x7fa08a11f000, F_OK) failed as expected with EFAULT
access03    5  TPASS  :  access(0x2314001, R_OK) failed as expected with EFAULT
access03    6  TPASS  :  access(0x2314001, W_OK) failed as expected with EFAULT
access03    7  TPASS  :  access(0x2314001, X_OK) failed as expected with EFAULT
access03    8  TPASS  :  access(0x2314001, F_OK) failed as expected with EFAULT
[   14.029571] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem

<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=n
[   14.029788] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
o
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=access04 stime=1429706449
cmdline="access04"
contacts=""
analysis=exit
<<<test_output>>>
access04    1  TPASS  :  functionality of access(testdir/testfile, F_OK) ok
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=access05 stime=1429706449
cmdline="access05"
contacts=""
analysis=exit
<<<test_output>>>
access05    1  TPASS  :  access failed as expected: TEST_ERRNO=EACCES(13): Permission denied
access05    2  TPASS  :  access failed as expected: TEST_ERRNO=EACCES(13): Permission denied
access05    3  TPASS  :  access failed as expected: TEST_ERRNO=EACCES(13): Permission denied
access05    4  TPASS  :  access failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
access05    5  TPASS  :  access failed as expected: TEST_ERRNO=EFAULT(14): Bad address
access05    6  TPASS  :  access failed as expected: TEST_ERRNO=EFAULT(14): Bad address
access05    7  TPASS  :  access failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
access05    8  TPASS  :  access failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
access05    9  TPASS  :  access failed as expected: TEST_ERRNO=ENOTDIR(20): Not a directory
access05   10  TPASS  :  access failed as expected: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=access06 stime=1429706449
cmdline="access06"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
access06    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
access06    0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
access06    1  TPASS  :  access failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=acct01 stime=1429706450
cmdline="acct01"
contacts=""
analysis=exit
<<<test_output>>>
[   14.156353] Process accounting resumed
mke2fs 1.42.12 (29-Aug-2014)
[   14.160736] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[   14.161156] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
[   14.161786] EXT4-fs (loop0): re-mounted. Opts: (null)
acct01      0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
acct01      0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
acct01      1  TPASS  :  acct failed as expected: TEST_ERRNO=EISDIR(21): Is a directory
acct01      2  TPASS  :  acct failed as expected: TEST_ERRNO=EACCES(13): Permission denied
acct01      3  TPASS  :  acct failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
acct01      4  TPASS  :  acct failed as expected: TEST_ERRNO=ENOTDIR(20): Not a directory
acct01      5  TPASS  :  acct failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
acct01      6  TPASS  :  acct failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
acct01      7  TPASS  :  acct failed as expected: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
acct01      8  TPASS  :  acct failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
acct01      9  TPASS  :  acct failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=add_key01 stime=1429706450
cmdline="add_key01"
contacts=""
analysis=exit
<<<test_output>>>
add_key01    1  TPASS  :  add_key call succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=add_key02 stime=1429706450
cmdline="add_key02"
contacts=""
analysis=exit
<<<test_output>>>
add_key02    1  TPASS  :  called add_key() with wrong args got EXPECTED errno: TEST_ERRNO=EINVAL(22): Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=adjtimex01 stime=1429706450
cmdline="adjtimex01"
contacts=""
analysis=exit
<<<test_output>>>
adjtimex01    1  TPASS  :  adjtimex() with mode 16447 returned 5
adjtimex01    2  TPASS  :  adjtimex() with mode 32769 returned 5
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=adjtimex02 stime=1429706450
cmdline="adjtimex02"
contacts=""
analysis=exit
<<<test_output>>>
adjtimex02    1  TPASS  :  Test Passed, adjtimex() returned -1: TEST_ERRNO=EFAULT(14): Bad address
adjtimex02    2  TPASS  :  Test Passed, adjtimex() returned -1: TEST_ERRNO=EINVAL(22): Invalid argument
adjtimex02    3  TPASS  :  Test Passed, adjtimex() returned -1: TEST_ERRNO=EINVAL(22): Invalid argument
adjtimex02    4  TCONF  :  adjtimex02.c:165: this kernel normalizes buf.offset value if it is outside the acceptable range.
adjtimex02    5  TCONF  :  adjtimex02.c:165: this kernel normalizes buf.offset value if it is outside the acceptable range.
adjtimex02    6  TPASS  :  Test Passed, adjtimex() returned -1: TEST_ERRNO=EPERM(1): Operation not permitted
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=alarm01 stime=1429706450
cmdline="alarm01"
contacts=""
analysis=exit
<<<test_output>>>
alarm01     1  TPASS  :  alarm(1) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=alarm02 stime=1429706450
cmdline="alarm02"
contacts=""
analysis=exit
<<<test_output>>>
alarm02     1  TPASS  :  alarm(18446744073709551615) returned 0 as expected for value -1
alarm02     2  TPASS  :  alarm(18446744073709551615) returned 0 as expected for value ULONG_MAX
alarm02     3  TPASS  :  alarm(0) returned 0 as expected for value ULONG_MAX+1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=alarm03 stime=1429706450
cmdline="alarm03"
contacts=""
analysis=exit
<<<test_output>>>
539: alarm(100), fork, alarm(0) child's alarm returned 0
alarm03     2  TPASS  :  alarm(100), fork, alarm(0) parent's alarm returned 100
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=alarm05 stime=1429706450
cmdline="alarm05"
contacts=""
analysis=exit
<<<test_output>>>
alarm05     1  TPASS  :  Functionality of alarm(5) successful
<<<execution_status>>>
initiation_status="ok"
duration=8 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=alarm06 stime=1429706458
cmdline="alarm06"
contacts=""
analysis=exit
<<<test_output>>>
alarm06     1  TPASS  :  Functionality of alarm(0) successful
<<<execution_status>>>
initiation_status="ok"
duration=15 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=alarm07 stime=1429706473
cmdline="alarm07"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=5 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=asyncio02 stime=1429706478
cmdline="asyncio02"
contacts=""
analysis=exit
<<<test_output>>>
asyncio02    1  TPASS  :  More than BUFSIZE bytes multiple synchronous writes to a file check out ok
asyncio02    2  TPASS  :  BUFSIZE bytes multiple synchronous writes to a file checks out ok
asyncio02    3  TPASS  :  Less than BUFSIZE bytes multiple synchronous writes to a file checks out ok
asyncio02    4  TPASS  :  More than BUFSIZE bytes multiple synchronous writes to a file check out ok
asyncio02    5  TPASS  :  BUFSIZE bytes multiple synchronous writes to a file checks out ok
asyncio02    6  TPASS  :  Less than BUFSIZE bytes multiple synchronous writes to a file checks out ok
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=bind01 stime=1429706478
cmdline="bind01"
contacts=""
analysis=exit
<<<test_output>>>
bind01      1  TPASS  :  invalid sockaddr successful
bind01      2  TPASS  :  invalid salen successful
bind01      3  TPASS  :  invalid socket successful
bind01      4  TPASS  :  INADDR_ANYPORT successful
bind01      5  TPASS  :  UNIX-domain of current directory successful
bind01      6  TPASS  :  non-local address successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=bind02 stime=1429706478
cmdline="bind02"
contacts=""
analysis=exit
<<<test_output>>>
bind02      0  TINFO  :  Defaulting to user nobody
bind02      0  TINFO  :  Socket will try to be bind by user: nobody, group: nogroup
bind02      1  TPASS  :  correct error
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=bdflush01 stime=1429706478
cmdline="bdflush01"
contacts=""
analysis=exit
<<<test_output>>>
bdflush01    2  TCONF  :  bdflush01.c:123: syscall __NR_bdflush not supported on your arch
bdflush01    3  TCONF  :  bdflush01.c:123: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=brk01 stime=1429706478
cmdline="brk01"
contacts=""
analysis=exit
<<<test_output>>>
brk01       1  TPASS  :  brk(38989298) returned 0, new size verified by sbrk
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=capget01 stime=1429706478
cmdline="capget01"
contacts=""
analysis=exit
<<<test_output>>>
capget01    1  TPASS  :  capget() returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=capget02 stime=1429706478
cmdline="capget02"
contacts=""
analysis=e
[   42.255214] capability: warning: `capget01' uses 32-bit capabilities (legacy support in use)
xit
<<<test_output>>>
capget02    1  TPASS  :  capget failed as expected: TEST_ERRNO=EFAULT(14): Bad address
capget02    2  TPASS  :  capget failed as expected: TEST_ERRNO=EFAULT(14): Bad address
capget02    3  TPASS  :  capget failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
capget02    4  TPASS  :  capget failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
capget02    5  TPASS  :  capget failed as expected: TEST_ERRNO=ESRCH(3): No such process
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=capset01 stime=1429706478
cmdline="capset01"
contacts=""
analysis=exit
<<<test_output>>>
capset01    1  TPASS  :  capset() returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=capset02 stime=1429706478
cmdline="capset02"
contacts=""
analysis=exit
<<<test_output>>>
capset02    1  TPASS  :  capset() returned -1, errno: EFAULT
capset02    2  TPASS  :  capset() returned -1, errno: EFAULT
capset02    3  TPASS  :  capset() returned -1, errno: EINVAL
capset02    4  TPASS  :  capset() returned -1, errno: EPERM
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=cacheflush01 stime=1429706478
cmdline="cacheflush01"
contacts=""
analysis=exit
<<<test_output>>>
cacheflush01    1  TCONF  :  cacheflush01.c:139: syscall __NR_cacheflush not supported on your arch
cacheflush01    2  TCONF  :  cacheflush01.c:139: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chdir01 stime=1429706478
cmdline="chdir01"
contacts=""
analysis=exit
<<<test_output>>>
chdir01     0  TINFO  :  Found file .
chdir01     0  TINFO  :  Found file ..
chdir01     0  TINFO  :  Found file chdirtest
chdir01     1  TPASS  :  failed as expected with ENOTDIR
chdir01     2  TPASS  :  failed as expected with ELOOP
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chdir01A stime=1429706478
cmdline="symlink01 -T chdir01"
contacts=""
analysis=exit
<<<test_output>>>
chdir01     1  TPASS  :  chdir(2) to object file location through symbolic link file is ok
chdir01     2  TPASS  :  chdir(2) to non-existent object file location through symbolic link file failed as expected
chdir01     3  TPASS  :  Nested symbolic link access condition caught.  ELOOP is returned
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chdir02 stime=1429706478
cmdline="chdir02"
contacts=""
analysis=exit
<<<test_output>>>
chdir02     1  TPASS  :  chdir(/) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chdir03 stime=1429706478
cmdline="chdir03"
contacts=""
analysis=exit
<<<test_output>>>
got EACCES as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=chdir04 stime=1429706478
cmdline="chdir04"
contacts=""
analysis=exit
<<<test_output>>>
chdir04     1  TPASS  :  failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
chdir04     2  TPASS  :  failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
chdir04     3  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod01 stime=1429706478
cmdline="chmod01"
contacts=""
analysis=exit
<<<test_output>>>
chmod01     1  TPASS  :  Functionality of chmod(testfile, 0) successful
chmod01     2  TPASS  :  Functionality of chmod(testfile, 07) successful
chmod01     3  TPASS  :  Functionality of chmod(testfile, 070) successful
chmod01     4  TPASS  :  Functionality of chmod(testfile, 0700) successful
chmod01     5  TPASS  :  Functionality of chmod(testfile, 0777) successful
chmod01     6  TPASS  :  Functionality of chmod(testfile, 02777) successful
chmod01     7  TPASS  :  Functionality of chmod(testfile, 04777) successful
chmod01     8  TPASS  :  Functionality of chmod(testfile, 06777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod01A stime=1429706478
cmdline="symlink01 -T chmod01"
contacts=""
analysis=exit
<<<test_output>>>
chmod01     1  TPASS  :  chmod(2) of object file permissions through symbolic link file is ok
chmod01     2  TPASS  :  chmod(2) error when accessing non-existent object through symbolic link is caught
chmod01     3  TPASS  :  Nested symbolic link access condition caught.  ELOOP is returned
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod02 stime=1429706478
cmdline="chmod02"
contacts=""
analysis=exit
<<<test_output>>>
chmod02     1  TPASS  :  chmod(test_file, 0) returned 0
chmod02     2  TPASS  :  chmod(test_file, 07) returned 0
chmod02     3  TPASS  :  chmod(test_file, 070) returned 0
chmod02     4  TPASS  :  chmod(test_file, 0700) returned 0
chmod02     5  TPASS  :  chmod(test_file, 0777) returned 0
chmod02     6  TPASS  :  chmod(test_file, 02777) returned 0
chmod02     7  TPASS  :  chmod(test_file, 04777) returned 0
chmod02     8  TPASS  :  chmod(test_file, 06777) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod03 stime=1429706478
cmdline="chmod03"
contacts=""
analysis=exit
<<<test_output>>>
chmod03     1  TPASS  :  Functionality of chmod(testfile, 01777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod04 stime=1429706478
cmdline="chmod04"
contacts=""
analysis=exit
<<<test_output>>>
chmod04     1  TPASS  :  Functionality of chmod(testdir_4, 01777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod05 stime=1429706478
cmdline="chmod05"
contacts=""
analysis=exit
<<<test_output>>>
chmod05     1  TPASS  :  Functionality of chmod(testdir, 043777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chmod06 stime=1429706478
cmdline="chmod06"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
[   42.313104] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[   42.313339] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
chmod06     0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
chmod06     0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
chmod06     1  TPASS  :  chmod failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
chmod06     2  TPASS  :  chmod failed as expected: TEST_ERRNO=EACCES(13): Permission denied
chmod06     3  TPASS  :  chmod failed as expected: TEST_ERRNO=EFAULT(14): Bad address
chmod06     4  TPASS  :  chmod failed as expected: TEST_ERRNO=EFAULT(14): Bad address
chmod06     5  TPASS  :  chmod failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
chmod06     6  TPASS  :  chmod failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
chmod06     7  TPASS  :  chmod failed as expected: TEST_ERRNO=ENOTDIR(20): Not a directory
chmod06     8  TPASS  :  chmod failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
chmod06     9  TPASS  :  chmod failed as expected: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=chmod07 stime=1429706478
cmdline="chmod07"
contacts=""
analysis=exit
<<<test_output>>>
chmod07     1  TPASS  :  Functionality of chmod(testfile, 01777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown01 stime=1429706478
cmdline="chown01"
contacts=""
analysis=exit
<<<test_output>>>
chown01     1  TPASS  :  chown(t_579, 0,0) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown01_16 stime=1429706478
cmdline="chown01_16"
contacts=""
analysis=exit
<<<test_output>>>
chown01     1  TPASS  :  chown(t_580, 0,0) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown02 stime=1429706478
cmdline="chown02"
contacts=""
analysis=exit
<<<test_output>>>
chown02     1  TPASS  :  chown(testfile1, ..) succeeded
chown02     2  TPASS  :  chown(testfile2, ..) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown02_16 stime=1429706478
cmdline="chown02_16"
contacts=""
analysis=exit
<<<test_output>>>
chown02     1  TPASS  :  chown(testfile1, ..) succeeded
chown02     2  TPASS  :  chown(testfile2, ..) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown03 stime=1429706478
cmdline="chown03"
contacts=""
analysis=exit
<<<test_output>>>
chown03     1  TPASS  :  chown(testfile, ..) was successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown03_16 stime=1429706478
cmdline="chown03_16"
contacts=""
analysis=exit
<<<test_output>>>
chown03     1  TPASS  :  chown(testfile, ..) was successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown04 stime=1429706478
cmdline="chown04"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
[   42.509877] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[   42.510083] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
chown04     0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
chown04     0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
chown04     1  TPASS  :  chown failed: TEST_ERRNO=EPERM(1): Operation not permitted
chown04     2  TPASS  :  chown failed: TEST_ERRNO=EACCES(13): Permission denied
chown04     3  TPASS  :  chown failed: TEST_ERRNO=EFAULT(14): Bad address
chown04     4  TPASS  :  chown failed: TEST_ERRNO=ENAMETOOLONG(36): File name too long
chown04     5  TPASS  :  chown failed: TEST_ERRNO=ENOENT(2): No such file or directory
chown04     6  TPASS  :  chown failed: TEST_ERRNO=ENOTDIR(20): Not a directory
chown04     7  TPASS  :  chown failed: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
chown04     8  TPASS  :  chown failed: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=chown04_16 stime=1429706478
cmdline="chown04_16"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
[   42.616331] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[   42.616620] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
chown04     0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
chown04     0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
chown04     1  TPASS  :  chown failed: TEST_ERRNO=EPERM(1): Operation not permitted
chown04     2  TPASS  :  chown failed: TEST_ERRNO=EACCES(13): Permission denied
chown04     3  TPASS  :  chown failed: TEST_ERRNO=EFAULT(14): Bad address
chown04     4  TPASS  :  chown failed: TEST_ERRNO=ENAMETOOLONG(36): File name too long
chown04     5  TPASS  :  chown failed: TEST_ERRNO=ENOENT(2): No such file or directory
chown04     6  TPASS  :  chown failed: TEST_ERRNO=ENOTDIR(20): Not a directory
chown04     7  TPASS  :  chown failed: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
chown04     8  TPASS  :  chown failed: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown05 stime=1429706478
cmdline="chown05"
contacts=""
analysis=exit
<<<test_output>>>
chown05     1  TPASS  :  chown succeeded
chown05     2  TPASS  :  chown succeeded
chown05     3  TPASS  :  chown succeeded
chown05     4  TPASS  :  chown succeeded
chown05     5  TPASS  :  chown succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chown05_16 stime=1429706478
cmdline="chown05_16"
contacts=""
analysis=exit
<<<test_output>>>
chown05     1  TPASS  :  chown succeeded
chown05     2  TPASS  :  chown succeeded
chown05     3  TPASS  :  chown succeeded
chown05     4  TPASS  :  chown succeeded
chown05     5  TPASS  :  chown succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chroot01 stime=1429706478
cmdline="chroot01"
contacts=""
analysis=exit
<<<test_output>>>
chroot01    1  TPASS  :  chroot set errno to EPERM.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chroot02 stime=1429706478
cmdline="chroot02"
contacts=""
analysis=exit
<<<test_output>>>
chroot02    1  TPASS  :  chroot functionality correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chroot03 stime=1429706478
cmdline="chroot03"
contacts=""
analysis=exit
<<<test_output>>>
chroot03    1  TPASS  :  failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
chroot03    2  TPASS  :  failed as expected: TEST_ERRNO=ENOTDIR(20): Not a directory
chroot03    3  TPASS  :  failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
chroot03    4  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
chroot03    5  TPASS  :  failed as expected: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=chroot04 stime=1429706478
cmdline="chroot04"
contacts=""
analysis=exit
<<<test_output>>>
chroot04    1  TPASS  :  got EACCESS as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=clock_getres01 stime=1429706478
cmdline="clock_getres01"
contacts=""
analysis=exit
<<<test_output>>>
clock_getres01    1  TPASS  :  clock_getres REALTIME succeeded
clock_getres01    2  TPASS  :  clock_getres MONOTONIC succeeded
clock_getres01    3  TPASS  :  clock_getres PROCESS_CPUTIME_ID succeeded
clock_getres01    4  TPASS  :  clock_getres THREAD_CPUTIME_ID succeeded
clock_getres01    5  TPASS  :  clock_getres REALTIME succeeded
clock_getres01    6  TPASS  :  clock_getres CLOCK_MONOTONIC_RAW succeeded
clock_getres01    7  TPASS  :  clock_getres CLOCK_REALTIME_COARSE succeeded
clock_getres01    8  TPASS  :  clock_getres CLOCK_MONOTONIC_COARSE succeeded
clock_getres01    9  TPASS  :  clock_getres CLOCK_BOOTTIME succeeded
clock_getres01   10  TPASS  :  clock_getres CLOCK_REALTIME_ALARM succeeded
clock_getres01   11  TPASS  :  clock_getres CLOCK_BOOTTIME_ALARM succeeded
clock_getres01   12  TPASS  :  clock_getres -1 succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clock_nanosleep01 stime=1429706478
cmdline="clock_nanosleep01"
contacts=""
analysis=exit
<<<test_output>>>
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=22 errno=0 (Success)
RESULT: return value(ret)=22 errno=0 (Success)
EXPECT: return value(ret)=22 errno=0 (Success)
RESULT: return value(ret)=22 errno=0 (Success)
EXPECT: return value(ret)=22 errno=0 (Success)
RESULT: return value(ret)=22 errno=0 (Success)
EXPECT: return value(ret)=4 errno=0 (Success)
RESULT: return value(ret)=4 errno=0 (Success)
clock_nanosleep01    0  TINFO  :  (case00) START
clock_nanosleep01    0  TINFO  :  check sleep time: (min:480) < 500 < (max:520) (msec)
clock_nanosleep01    0  TINFO  :  remain time: 1 4217117
clock_nanosleep01    0  TINFO  :  (case00) END => OK
clock_nanosleep01    0  TINFO  :  (case01) START
clock_nanosleep01    0  TINFO  :  check sleep time: (min:480) < 500 < (max:520) (msec)
clock_nanosleep01    0  TINFO  :  remain time: 1 4217117
clock_nanosleep01    0  TINFO  :  (case01) END => OK
clock_nanosleep01    0  TINFO  :  (case02) START
clock_nanosleep01    0  TINFO  :  remain time: 1 4217117
clock_nanosleep01    0  TINFO  :  (case02) END => OK
clock_nanosleep01    0  TINFO  :  (case03) START
clock_nanosleep01    0  TINFO  :  remain time: 1 4217117
clock_nanosleep01    0  TINFO  :  (case03) END => OK
clock_nanosleep01    0  TINFO  :  (case04) START
clock_nanosleep01    0  TINFO  :  remain time: 1 4217117
clock_nanosleep01    0  TINFO  :  (case04) END => OK
clock_nanosleep01    0  TINFO  :  (case05) START
clock_nanosleep01    0  TINFO  :  remain time: 9 498109427
clock_nanosleep01    0  TINFO  :  (case05) END => OK
clock_nanosleep01    1  TPASS  :  clock_nanosleep call succeeded
<<<execution_status>>>
initiation_status="ok"
duration=2 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clock_nanosleep2_01 stime=1429706480
cmdline="clock_nanosleep2_01"
contacts=""
analysis=exit
<<<test_output>>>
[   72.865089] ipmi message handler version 39.2
[   72.868714] IPMI Watchdog: driver initialized
clock_nanosleep2_01    0  TINFO  :  Iteration = 0
clock_nanosleep2_01    0  TINFO  :  Iteration = 1
clock_nanosleep2_01    0  TINFO  :  Iteration = 2
clock_nanosleep2_01    0  TINFO  :  Iteration = 3
clock_nanosleep2_01    0  TINFO  :  Iteration = 4
clock_nanosleep2_01    0  TINFO  :  Iteration = 5
clock_nanosleep2_01    0  TINFO  :  Iteration = 6
clock_nanosleep2_01    0  TINFO  :  Iteration = 7
clock_nanosleep2_01    0  TINFO  :  Iteration = 8
clock_nanosleep2_01    0  TINFO  :  Iteration = 9
clock_nanosleep2_01    0  TINFO  :  Iteration = 10
clock_nanosleep2_01    0  TINFO  :  Iteration = 11
clock_nanosleep2_01    0  TINFO  :  Iteration = 12
clock_nanosleep2_01    0  TINFO  :  Iteration = 13
clock_nanosleep2_01    0  TINFO  :  Iteration = 14
clock_nanosleep2_01    0  TINFO  :  Iteration = 15
clock_nanosleep2_01    0  TINFO  :  Iteration = 16
clock_nanosleep2_01    0  TINFO  :  Iteration = 17
clock_nanosleep2_01    0  TINFO  :  Iteration = 18
clock_nanosleep2_01    0  TINFO  :  Iteration = 19
clock_nanosleep2_01    0  TINFO  :  Iteration = 20
clock_nanosleep2_01    0  TINFO  :  Iteration = 21
clock_nanosleep2_01    0  TINFO  :  Iteration = 22
clock_nanosleep2_01    0  TINFO  :  Iteration = 23
clock_nanosleep2_01    0  TINFO  :  Iteration = 24
clock_nanosleep2_01    0  TINFO  :  Iteration = 25
clock_nanosleep2_01    0  TINFO  :  Iteration = 26
clock_nanosleep2_01    0  TINFO  :  Iteration = 27
clock_nanosleep2_01    0  TINFO  :  Iteration = 28
clock_nanosleep2_01    0  TINFO  :  Iteration = 29
clock_nanosleep2_01    0  TINFO  :  Iteration = 30
clock_nanosleep2_01    0  TINFO  :  Iteration = 31
clock_nanosleep2_01    0  TINFO  :  Iteration = 32
clock_nanosleep2_01    0  TINFO  :  Iteration = 33
clock_nanosleep2_01    0  TINFO  :  Iteration = 34
clock_nanosleep2_01    0  TINFO  :  Iteration = 35
clock_nanosleep2_01    0  TINFO  :  Iteration = 36
clock_nanosleep2_01    0  TINFO  :  Iteration = 37
clock_nanosleep2_01    0  TINFO  :  Iteration = 38
clock_nanosleep2_01    0  TINFO  :  Iteration = 39
clock_nanosleep2_01    0  TINFO  :  Iteration = 40
clock_nanosleep2_01    0  TINFO  :  Iteration = 41
clock_nanosleep2_01    0  TINFO  :  Iteration = 42
clock_nanosleep2_01    0  TINFO  :  Iteration = 43
clock_nanosleep2_01    0  TINFO  :  Iteration = 44
clock_nanosleep2_01    0  TINFO  :  Iteration = 45
clock_nanosleep2_01    0  TINFO  :  Iteration = 46
clock_nanosleep2_01    0  TINFO  :  Iteration = 47
clock_nanosleep2_01    0  TINFO  :  Iteration = 48
clock_nanosleep2_01    0  TINFO  :  Iteration = 49
clock_nanosleep2_01    0  TINFO  :  Iteration = 50
clock_nanosleep2_01    1  TPASS  :  clock_nanosleep2() passed
<<<execution_status>>>
initiation_status="ok"
duration=51 termination_type=exited termination_id=0 corefile=no
cutime=2 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone01 stime=1429706531
cmdline="clone01"
contacts=""
analysis=exit
<<<test_output>>>
clone01     1  TPASS  :  clone returned 634
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone02 stime=1429706531
cmdline="clone02"
contacts=""
analysis=exit
<<<test_output>>>
clone02     1  TPASS  :  Test Passed
clone02     1  TPASS  :  Test Passed
clone02     2  TPASS  :  Test Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone03 stime=1429706531
cmdline="clone03"
contacts=""
analysis=exit
<<<test_output>>>
clone03     1  TPASS  :  Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone04 stime=1429706531
cmdline="clone04"
contacts=""
analysis=exit
<<<test_output>>>
clone04     1  TPASS  :  expected failure; Got EINVAL
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone05 stime=1429706531
cmdline="clone05"
contacts=""
analysis=exit
<<<test_output>>>
clone05     1  TPASS  :  Test Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=clone06 stime=1429706531
cmdline="clone06"
contacts=""
analysis=exit
<<<test_output>>>
clone06     1  TPASS  :  Test Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone07 stime=1429706531
cmdline="clone07"
contacts=""
analysis=exit
<<<test_output>>>
clone07     1  TPASS  :  Use of return() in child did not cause SIGSEGV
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=clone08 stime=1429706531
cmdline="clone08"
contacts=""
analysis=exit
<<<test_output>>>
clone08     0  TINFO  :  running CLONE_PARENT
clone08     1  TPASS  :  test CLONE_PARENT
clone08     0  TINFO  :  running CLONE_CHILD_SETTID
clone08     2  TPASS  :  test CLONE_CHILD_SETTID
clone08     0  TINFO  :  running CLONE_PARENT_SETTID
clone08     3  TPASS  :  test CLONE_PARENT_SETTID
clone08     0  TINFO  :  running CLONE_THREAD
clone08     4  TPASS  :  test CLONE_THREAD
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=close01 stime=1429706531
cmdline="close01"
contacts=""
analysis=exit
<<<test_output>>>
close01     1  TPASS  :  file appears closed
close01     2  TPASS  :  pipe appears closed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=close02 stime=1429706531
cmdline="close02"
contacts=""
analysis=exit
<<<test_output>>>
close02     1  TPASS  :  call returned EBADF
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=close08 stime=1429706531
cmdline="close08"
contacts=""
analysis=exit
<<<test_output>>>
close08     1  TPASS  :  close(tfile_656) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=confstr01 stime=1429706531
cmdline="confstr01"
contacts=""
analysis=exit
<<<test_output>>>
confstr01    1  TPASS  :  confstr PATH = '/bin:/usr/bin'
confstr01    2  TPASS  :  confstr XBS5_ILP32_OFF32_CFLAGS = ''
confstr01    3  TPASS  :  confstr XBS5_ILP32_OFF32_LDFLAGS = ''
confstr01    4  TPASS  :  confstr XBS5_ILP32_OFF32_LIBS = ''
confstr01    5  TPASS  :  confstr XBS5_ILP32_OFF32_LINTFLAGS = ''
confstr01    6  TPASS  :  confstr XBS5_ILP32_OFFBIG_CFLAGS = ''
confstr01    7  TPASS  :  confstr XBS5_ILP32_OFFBIG_LDFLAGS = ''
confstr01    8  TPASS  :  confstr XBS5_ILP32_OFFBIG_LIBS = ''
confstr01    9  TPASS  :  confstr XBS5_ILP32_OFFBIG_LINTFLAGS = ''
confstr01   10  TPASS  :  confstr XBS5_LP64_OFF64_CFLAGS = '-m64'
confstr01   11  TPASS  :  confstr XBS5_LP64_OFF64_LDFLAGS = '-m64'
confstr01   12  TPASS  :  confstr XBS5_LP64_OFF64_LIBS = ''
confstr01   13  TPASS  :  confstr XBS5_LP64_OFF64_LINTFLAGS = ''
confstr01   14  TPASS  :  confstr XBS5_LPBIG_OFFBIG_CFLAGS = ''
confstr01   15  TPASS  :  confstr XBS5_LPBIG_OFFBIG_LDFLAGS = ''
confstr01   16  TPASS  :  confstr XBS5_LPBIG_OFFBIG_LIBS = ''
confstr01   17  TPASS  :  confstr XBS5_LPBIG_OFFBIG_LINTFLAGS = ''
confstr01   18  TPASS  :  confstr GNU_LIBC_VERSION = 'glibc 2.19'
confstr01   19  TPASS  :  confstr GNU_LIBPTHREAD_VERSION = 'NPTL 2.19'
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no

<<<test_end>>>
<<<test_start>>>
tag=connect01 stime=1429706531
cmdline="connect01"
contacts=""
analysis=exit
<<<test_output>>>
connect01    1  TPASS  :  bad file descriptor successful
connect01    2  TPASS  :  invalid socket buffer successful
connect01    3  TPASS  :  invalid salen successful
connect01    4  TPASS  :  invalid socket successful
connect01    5  TPASS  :  already connected successful
connect01    6  TPASS  :  connection refused successful
connect01    7  TPASS  :  invalid address family successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=creat01 stime=1429706531
cmdline="creat01"
contacts=""
analysis=exit
<<<test_output>>>
creat01     1  TPASS  :  file was created and written to successfully
creat01     2  TPASS  :  creat truncated existing file to 0 bytes
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=creat03 stime=1429706531
cmdline="creat03"
contacts=""
analysis=exit
<<<test_output>>>
creat03     0  TINFO  :  Created file has mode = 0100444
creat03     1  TPASS  :  save text bit cleared
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=creat04 stime=1429706531
cmdline="creat04"
contacts=""
analysis=exit
<<<test_output>>>
creat04     1  TPASS  :  call failed with EACCES as expected
creat04     2  TPASS  :  call failed with EACCES as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=creat05 stime=1429706531
cmdline="creat05"
contacts=""
analysis=exit
<<<test_output>>>
creat05     0  TINFO  :  first file is #7
creat05     0  TINFO  :  could not creat file #1025
creat05     1  TPASS  :  call failed with expected error - EMFILE
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_i
[   95.333730] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
d=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=creat06 stime=1429706531
cmdline="creat06"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
creat06     0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
creat06     0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
creat06     1  TPASS  :  got expected failure: TEST_ERRNO=EISDIR(21): Is a directory
creat06     2  TPASS  :  got expected failure: TEST_ERRNO=ENAMETOOLONG(36): File name too long
creat06     3  TPASS  :  got expected failure: TEST_ERRNO=ENOENT(2): No such file or directory
creat06     4  TPASS  :  got expected failure: TEST_ERRNO=ENOTDIR(20): Not a directory
creat06     5  TPASS  :  got expected failure: TEST_ERRNO=EFAULT(14): Bad address
creat06     6  TPASS  :  got expected failure: TEST_ERRNO=EACCES(13): Permission denied
creat06     7  TPASS  :  got expected failure: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
creat06     8  TPASS  :  got expected failure: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=creat07 stime=1429706531
cmdline="creat07"
contacts=""
analysis=exit
<<<test_output>>>
CHILD: Failed to open fifo '': No such file or directory at creat07_child.c:31creat07     1  TBROK  :  tst_checkpoint.c:126: Checkpoint timeouted after 5000 msecs at creat07.c:78
creat07     2  TBROK  :  tst_checkpoint.c:126: Remaining cases broken
<<<execution_status>>>
initiation_status="ok"
duration=5 termination_type=exited termination_id=2 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=creat08 stime=1429706536
cmdline="creat08"
contacts=""
analysis=exit
<<<test_output>>>
creat08     1  TPASS  :  Test passed in block0.
creat08     2  TPASS  :  Test passed in block1.
creat08     3  TPASS  :  Test passed in block2.
creat08     4  TPASS  :  Test passed in block3
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=creat09 stime=1429706536
cmdline="creat09"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup01 stime=1429706536
cmdline="dup01"
contacts=""
analysis=exit
<<<test_output>>>
dup01       1  TPASS  :  dup(dupfile) returned 8
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup02 stime=1429706536
cmdline="dup02"
contacts=""
analysis=exit
<<<test_output>>>
dup02       1  TPASS  :  dup failed as expected with EBADF
dup02       2  TPASS  :  dup failed as expected with EBADF
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup03 stime=1429706536
cmdline="dup03"
contacts=""
analysis=exit
<<<test_output>>>
dup03       1  TPASS  :  dup failed as expected with EMFILE
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup04 stime=1429706536
cmdline="dup04"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup05 stime=1429706536
cmdline="dup05"
contacts=""
analysis=exit
<<<test_output>>>
dup05       1  TPASS  :  dup returned 8
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup06 stime=1429706536
cmdline="dup06"
contacts=""
analysis=exit
<<<test_output>>>
dup06       1  TPASS  :  Test passed.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup07 stime=1429706536
cmdline="dup07"
contacts=""
analysis=exit
<<<test_output>>>
dup07       1  TPASS  :  Passed in read mode.
dup07       2  TPASS  :  Passed in write mode.
dup07       3  TPASS  :  Passed in read/write mode.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup201 stime=1429706536
cmdline="dup201"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup202 stime=1429706536
cmdline="dup202"
contacts=""
analysis=exit
<<<test_output>>>
dup202      1  TPASS  :  fstat shows new and old modes are the same
dup202      2  TPASS  :  fstat shows new and old modes are the same
dup202      3  TPASS  :  fstat shows new and old modes are the same
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=dup203 stime=1429706536
cmdline="dup203"
contacts=""
analysis=exit
<<<test_output>>>
dup203      0  TINFO  :  Enter block 1
dup203      0  TINFO  :  Test duping over an open fd
dup203      1  TPASS  :  dup2 test 1 functionality is correct
dup203      0  TINFO  :  Exit block 1
dup203      0  TINFO  :  Enter block 2
dup203      0  TINFO  :  Test close on exec flag
dup203      2  TPASS  :  dup2 test 2 functionality is correct
dup203      0  TINFO  :  Exit block 2
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup204 stime=1429706536
cmdline="dup204"
contacts=""
analysis=exit
<<<test_output>>>
dup204      1  TPASS  :  original and duped inodes are the same
dup204      2  TPASS  :  original and duped inodes are the same
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup205 stime=1429706536
cmdline="dup205"
contacts=""
analysis=exit
<<<test_output>>>
dup205      1  TPASS  :  Test passed.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup3_01 stime=1429706536
cmdline="dup3_01"
contacts=""
analysis=exit
<<<test_output>>>
dup3_01     1  TPASS  :  dup3(O_CLOEXEC) PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=dup3_02 stime=1429706536
cmdline="dup3_02"
contacts=""
analysis=exit
<<<test_output>>>
dup3_02     1  TPASS  :  dup3 failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
dup3_02     2  TPASS  :  dup3 failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
dup3_02     3  TPASS  :  dup3 failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=epoll_create1_01 stime=1429706536
cmdline="epoll_create1_01"
contacts=""
analysis=exit
<<<test_output>>>
epoll_create1_01    1  TPASS  :  epoll_create1(EPOLL_CLOEXEC) PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=epoll01 stime=1429706536
cmdline="epoll-ltp"
contacts=""
analysis=exit
<<<test_output>>>
epoll01     0  TINFO  :  testing if epoll() system call works
epoll01     0  TINFO  :  gettimeofday() works
epoll01     0  TINFO  :  random number seeded with gettimeofday() [seed = 402533] works
epoll01     0  TINFO  :  Testing epoll_create
epoll01     1  TPASS  :  epoll_create with negative set size
epoll01     2  TPASS  :  epoll_create with large set size (size = 2147483647)
epoll01     3  TPASS  :  epoll_create with large set size (size = 2147483646)
epoll01     4  TPASS  :  epoll_create with large set size (size = 2147483645)
epoll01     5  TPASS  :  epoll_create with large set size (size = 2147483644)
epoll01     6  TPASS  :  epoll_create with large set size (size = 2147483643)
epoll01     7  TPASS  :  epoll_create with large set size (size = 2147483642)
epoll01     8  TPASS  :  epoll_create with large set size (size = 2147483641)
epoll01     9  TPASS  :  epoll_create with large set size (size = 2147483640)
epoll01    10  TPASS  :  epoll_create with large set size (size = 2147483639)
epoll01    11  TPASS  :  epoll_create with large set size (size = 2147483638)
epoll01    12  TPASS  :  epoll_create with large set size (size = 2147483637)
epoll01    13  TPASS  :  epoll_create with large set size (size = 2147483636)
epoll01    14  TPASS  :  epoll_create with large set size (size = 2147483635)
epoll01    15  TPASS  :  epoll_create with large set size (size = 2147483634)
epoll01    16  TPASS  :  epoll_create with large set size (size = 2147483633)
epoll01    17  TPASS  :  epoll_create with large set size (size = 2147483632)
epoll01    18  TPASS  :  epoll_create with random large set size (size = 1381327164)
epoll01    19  TPASS  :  epoll_create with random large set size (size = 1268687402)
epoll01    20  TPASS  :  epoll_create with random large set size (size = 557299401)
epoll01    21  TPASS  :  epoll_create with random large set size (size = 151493927)
epoll01    22  TPASS  :  epoll_create with random large set size (size = 867582401)
epoll01    23  TPASS  :  epoll_create with random large set size (size = 409579826)
epoll01    24  TPASS  :  epoll_create with random large set size (size = 650921558)
epoll01    25  TPASS  :  epoll_create with random large set size (size = 70102998)
epoll01    26  TPASS  :  epoll_create with random large set size (size = 1786654634)
epoll01    27  TPASS  :  epoll_create with random large set size (size = 1529346341)
epoll01    28  TPASS  :  epoll_create with random large set size (size = 600796124)
epoll01    29  TPASS  :  epoll_create with random large set size (size = 979189369)
epoll01    30  TPASS  :  epoll_create with random large set size (size = 1754065321)
epoll01    31  TPASS  :  epoll_create with random large set size (size = 460332361)
epoll01    32  TPASS  :  epoll_create with random large set size (size = 54114162)
epoll01    33  TPASS  :  epoll_create with random large set size (size = 274471360)
epoll01     0  TINFO  :  Summary: Of 33 tests, epoll_create failed 0 (100% passed).
epoll01     0  TINFO  :  Testing epoll_ctl
epoll01     0  TINFO  :  Summary: Of 13824 tests, epoll_ctl failed 0 (100% passed).
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=4 cstime=159
<<<test_end>>>
<<<test_start>>>
tag=eventfd01 stime=1429706537
cmdline="eventfd01"
contacts=""
analysis=exit
<<<test_output>>>
eventfd01    1  TPASS  :  counter value matches required
eventfd01    2  TPASS  :  read failed with EAGAIN as expected
eventfd01    3  TPASS  :  counter value matches required
eventfd01    4  TPASS  :  write failed with EAGAIN as expected
eventfd01    5  TPASS  :  read failed with EINVAL as expected
eventfd01    6  TPASS  :  write failed with EINVAL as expected
eventfd01    7  TPASS  :  write failed with EINVAL as expected
eventfd01    8  TPASS  :  fd is set in readfds
eventfd01    9  TPASS  :  fd is not set in readfds
eventfd01   10  TPASS  :  fd is set in writefds
eventfd01   11  TPASS  :  fd is not set in writefds
eventfd01    1  TPASS  :  counter value matches required
eventfd01    2  TPASS  :  read failed with EAGAIN as expected
eventfd01    3  TPASS  :  counter value matches required
eventfd01    4  TPASS  :  write failed with EAGAIN as expected
eventfd01    5  TPASS  :  read failed with EINVAL as expected
eventfd01    6  TPASS  :  write failed with EINVAL as expected
eventfd01    7  TPASS  :  write failed with EINVAL as expected
eventfd01    8  TPASS  :  fd is set in readfds
eventfd01    9  TPASS  :  fd is not set in readfds
eventfd01   10  TPASS  :  fd is set in writefds
eventfd01   11  TPASS  :  fd is not set in writefds
eventfd01   12  TPASS  :  counter value write from child successful
eventfd01   13  TCONF  :  eventfd01.c:643: eventfd support is not available in AIO subsystem
eventfd01   14  TCONF  :  eventfd01.c:648: eventfd support is not available in AIO subsystem
eventfd01   15  TCONF  :  eventfd01.c:653: eventfd support is not available in AIO subsystem
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=eventfd2_01 stime=1429706537
cmdline="eventfd2_01"
contacts=""
analysis=exit
<<<test_output>>>
eventfd2_01    1  TPASS  :  eventfd2(EFD_CLOEXEC) Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=eventfd2_02 stime=1429706537
cmdline="eventfd2_02"
contacts=""
analysis=exit
<<<test_output>>>
eventfd2_02    1  TPASS  :  eventfd2(EFD_NONBLOCK) PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=eventfd2_03 stime=1429706537
cmdline="eventfd2_03"
contacts=""
analysis=exit
<<<test_output>>>
[14526] posting 1 on 8
[14526] waiting on 7
[14526] wait completed on 7: count=1
[14526] posting 1 on 8
[14526] waiting on 7
[14526] wait completed on 7: count=1
[14526] posting 5 on 8
[14526] waiting 5 times on 7
[14526] wait completed on 7: count=1
[14526] wait completed on 7: count=1
[14526] wait completed on 7: count=1
[14526] wait completed on 7: count=1
[14526] wait completed on 7: count=1
[14525] posting 1 on 7
[14525] waiting on 8
[14525] wait completed on 8: count=1
[14525] posting 1 on 7
[14525] waiting on 8
[14525] wait completed on 8: count=1
[14525] posting 5 on 7
[14525] waiting 5 times on 8
[14525] wait completed on 8: count=1
[14525] wait completed on 8: count=1
[14525] wait completed on 8: count=1
[14525] wait completed on 8: count=1
[14525] wait completed on 8: count=1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execl01 stime=1429706537
cmdline="execl01"
contacts=""
analysis=exit
<<<test_output>>>
execl01     1  TPASS  :  execl - properly exec's a simple program..
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execle01 stime=1429706537
cmdline="execle01"
contacts=""
analysis=exit
<<<test_output>>>
execle01    1  TPASS  :  execle - properly exec's a simple program..
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execlp01 stime=1429706537
cmdline="execlp01"
contacts=""
analysis=exit
<<<test_output>>>
execlp01    1  TPASS  :  execlp - properly exec's a simple program..
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execv01 stime=1429706537
cmdline="execv01"
contacts=""
analysis=exit
<<<test_output>>>
execv01     1  TPASS  :  execv - properly exec's a simple program..
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=execve01 stime=1429706537
cmdline="execve01"
contacts=""
analysis=exit
<<<test_output>>>
execve01    1  TPASS  :  execve - properly exec's a simple program..
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execve02 stime=1429706537
cmdline="execve02 -F $LTPROOT/testcases/bin/test3"
contacts=""
analysis=exit
<<<test_output>>>
execve failed with EACCES as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execve03 stime=1429706537
cmdline="execve03"
contacts=""
analysis=exit
<<<test_output>>>
execve03    1  TPASS  :  execve failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
execve03    2  TPASS  :  execve failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
execve03    3  TPASS  :  execve failed as expected: TEST_ERRNO=ENOTDIR(20): Not a directory
execve03    4  TPASS  :  execve failed as expected: TEST_ERRNO=EFAULT(14): Bad address
execve03    5  TPASS  :  execve failed as expected: TEST_ERRNO=EACCES(13): Permission denied
execve03    6  TPASS  :  execve failed as expected: TEST_ERRNO=ENOEXEC(8): Exec format error
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execve04 stime=1429706537
cmdline="execve04 -F $LTPROOT/testcases/bin/test3"
contacts=""
analysis=exit
<<<test_output>>>
execve failed with ETXTBSY as expected
execve04    1  TPASS  :  execve failed as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=execve05 stime=1429706537
cmdline="execve05 20 $LTPROOT/testcases/bin/execve05 $LTPROOT/testcases/bin/execve05 4"
contacts=""
analysis=exit
<<<test_output>>>
execve05    1  TPASS  :  Test DONE, pid 14548, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14549, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14550, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14551, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14552, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14553, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14554, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
execve05    1  TPASS  :  Test DONE, pid 14555, -- /lkp/benchmarks/ltp/testcases/bin/execve05 0 /lkp/benchmarks/ltp/testcases/bin/execve05 /lkp/benchmarks/ltp/testcases/bin/execve05
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=execvp01 stime=1429706538
cmdline="execvp01"
contacts=""
analysis=exit
<<<test_output>>>
execvp01    1  TPASS  :  execvp - properly exec's a simple program..
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=exit01 stime=1429706538
cmdline="exit01"
contacts=""
analysis=exit
<<<test_output>>>
exit01      1  TPASS  :  exit() test PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=exit02 stime=1429706538
cmdline="exit02"
contacts=""
analysis=exit
<<<test_output>>>
exit02      1  TPASS  :  exit() test PASSED
<<<execution_status>>>
initiation_status="ok"
duration=3 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=exit_group01 stime=1429706541
cmdline="exit_group01"
contacts=""
analysis=exit
<<<test_output>>>
exit_group01    1  TPASS  :  exit_group succeeded
<<<execution_status>>>
initiation_status="ok"
duration=5 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=faccessat01 stime=1429706546
cmdline="faccessat01"
contacts=""
analysis=exit
<<<test_output>>>
faccessat01    1  TPASS  :  faccessat() returned the expected  errno 0: Success
faccessat01    2  TPASS  :  faccessat() returned the expected  errno 0: Success
faccessat01    3  TPASS  :  faccessat() returned the expected  errno 20: Not a directory
faccessat01    4  TPASS  :  faccessat() returned the expected  errno 9: Bad file descriptor
faccessat01    5  TPASS  :  faccessat() returned the expected  errno 0: Success
faccessat01    6  TPASS  :  faccessat() returned the expected  errno 0: Success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fallocate01 stime=1429706546
cmdline="fallocate01"
contacts=""
analysis=exit
<<<test_output>>>
fallocate01    1  TPASS  :  fallocate(7, 0, 49152, 4096) returned 0
fallocate01    2  TPASS  :  write operation on fallocated(7, 0, 49152, 4096) returned 1
fallocate01    3  TPASS  :  fallocate(8, 1, 49152, 4096) returned 0
fallocate01    4  TPASS  :  write operation on fallocated(8, 1, 49152, 4096) returned 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fallocate02 stime=1429706546
cmdline="fallocate02"
contacts=""
analysis=exit
<<<test_output>>>
fallocate02    1  TPASS  :  fallocate(test_file1:7, 1, 0, 1024) returned 9: TEST_ERRNO=EBADF(9): Bad file descriptor
fallocate02    2  TPASS  :  fallocate(test_file2:8, 1, -1024, 1024) returned 22: TEST_ERRNO=EINVAL(22): Invalid argument
fallocate02    3  TPASS  :  fallocate(test_file2:8, 1, 1024, -1024) returned 22: TEST_ERRNO=EINVAL(22): Invalid argument
fallocate02    4  TPASS  :  fallocate(test_file2:8, 1, 12288, 0) returned 22: TEST_ERRNO=EINVAL(22): Invalid argument
fallocate02    5  TPASS  :  fallocate(test_file2:8, 1, 12288, -1
[  110.128527] random: nonblocking pool is initialized
024) returned 22: TEST_ERRNO=EINVAL(22): Invalid argument
fallocate02    6  TPASS  :  fallocate(test_file2:8, 1, -24576, 1024) returned 22: TEST_ERRNO=EINVAL(22): Invalid argument
fallocate02    7  TPASS  :  fallocate(test_file2:8, 1, 9223372036854774784, 1024) returned 27: TEST_ERRNO=EFBIG(27): File too large
fallocate02    8  TPASS  :  fallocate(test_file2:8, 1, 1024, 9223372036854774784) returned 27: TEST_ERRNO=EFBIG(27): File too large
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fallocate03 stime=1429706546
cmdline="fallocate03"
contacts=""
analysis=exit
<<<test_output>>>
fallocate03    1  TPASS  :  fallocate(tfile_sparse_14567, 0, 8192, 4096) returned 0
fallocate03    2  TPASS  :  fallocate(tfile_sparse_14567, 0, 49152, 4096) returned 0
fallocate03    3  TPASS  :  fallocate(tfile_sparse_14567, 0, 69632, 4096) returned 0
fallocate03    4  TPASS  :  fallocate(tfile_sparse_14567, 0, 102400, 4096) returned 0
fallocate03    5  TPASS  :  fallocate(tfile_sparse_14567, 1, 8192, 4096) returned 0
fallocate03    6  TPASS  :  fallocate(tfile_sparse_14567, 1, 49152, 4096) returned 0
fallocate03    7  TPASS  :  fallocate(tfile_sparse_14567, 1, 77824, 4096) returned 0
fallocate03    8  TPASS  :  fallocate(tfile_sparse_14567, 1, 106496, 4096) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise01 stime=1429706546
cmdline="                     posix_fadvise01"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise01    1  TPASS  :  call succeeded expectedly
posix_fadvise01    2  TPASS  :  call succeeded expectedly
posix_fadvise01    3  TPASS  :  call succeeded expectedly
posix_fadvise01    4  TPASS  :  call succeeded expectedly
posix_fadvise01    5  TPASS  :  call succeeded expectedly
posix_fadvise01    6  TPASS  :  call succeeded expectedly
<<<execution_status>>>
initiation_status="ok"
[  110.142458] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem

duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
[  110.142840] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)

tag=posix_fadvise01_64 stime=1429706546
cmdline="               posix_fadvise01_64"
contacts=""
analysis=exit
<<<test_output>>
[  110.142990] EXT4-fs (loop0): re-mounted. Opts: (null)
>
posix_fadvise01_64    1  TPASS  :  call succeeded expectedly
posix_fadvise01_64    2  TPASS  :  call succeeded expectedly
posix_fadvise01_64    3  TPASS  :  call succeeded expectedly
posix_fadvise01_64    4  TPASS  :  call succeeded expectedly
posix_fadvise01_64    5  TPASS  :  call succeeded expectedly
posix_fadvise01_64    6  TPASS  :  call succeeded expectedly
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise02 stime=1429706546
cmdline="                     posix_fadvise02"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise02    1  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02    2  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02    3  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02    4  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02    5  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02    6  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise02_64 stime=1429706546
cmdline="               posix_fadvise02_64"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise02_64    1  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02_64    2  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02_64    3  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02_64    4  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02_64    5  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
posix_fadvise02_64    6  TPASS  :  expected failure - returned value = 9 : Bad file descriptor
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise03 stime=1429706546
cmdline="                     posix_fadvise03"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise03    1  TPASS  :  expected failure - returned value = 22, advise = 6 : Invalid argument
posix_fadvise03    2  TPASS  :  expected failure - returned value = 22, advise = 7 : Invalid argument
posix_fadvise03    3  TPASS  :  expected failure - returned value = 22, advise = 8 : Invalid argument
posix_fadvise03    4  TPASS  :  expected failure - returned value = 22, advise = 9 : Invalid argument
posix_fadvise03    5  TPASS  :  expected failure - returned value = 22, advise = 10 : Invalid argument
posix_fadvise03    6  TPASS  :  expected failure - returned value = 22, advise = 11 : Invalid argument
posix_fadvise03    7  TPASS  :  expected failure - returned value = 22, advise = 12 : Invalid argument
posix_fadvise03    8  TPASS  :  expected failure - returned value = 22, advise = 13 : Invalid argument
posix_fadvise03    9  TPASS  :  expected failure - returned value = 22, advise = 14 : Invalid argument
posix_fadvise03   10  TPASS  :  expected failure - returned value = 22, advise = 15 : Invalid argument
posix_fadvise03   11  TPASS  :  expected failure - returned value = 22, advise = 16 : Invalid argument
posix_fadvise03   12  TPASS  :  expected failure - returned value = 22, advise = 17 : Invalid argument
posix_fadvise03   13  TPASS  :  expected failure - returned value = 22, advise = 18 : Invalid argument
posix_fadvise03   14  TPASS  :  expected failure - returned value = 22, advise = 19 : Invalid argument
posix_fadvise03   15  TPASS  :  expected failure - returned value = 22, advise = 20 : Invalid argument
posix_fadvise03   16  TPASS  :  expected failure - returned value = 22, advise = 21 : Invalid argument
posix_fadvise03   17  TPASS  :  expected failure - returned value = 22, advise = 22 : Invalid argument
posix_fadvise03   18  TPASS  :  expected failure - returned value = 22, advise = 23 : Invalid argument
posix_fadvise03   19  TPASS  :  expected failure - returned value = 22, advise = 24 : Invalid argument
posix_fadvise03   20  TPASS  :  expected failure - returned value = 22, advise = 25 : Invalid argument
posix_fadvise03   21  TPASS  :  expected failure - returned value = 22, advise = 26 : Invalid argument
posix_fadvise03   22  TPASS  :  expected failure - returned value = 22, advise = 27 : Invalid argument
posix_fadvise03   23  TPASS  :  expected failure - returned value = 22, advise = 28 : Invalid argument
posix_fadvise03   24  TPASS  :  expected failure - returned value = 22, advise = 29 : Invalid argument
posix_fadvise03   25  TPASS  :  expected failure - returned value = 22, advise = 30 : Invalid argument
posix_fadvise03   26  TPASS  :  expected failure - returned value = 22, advise = 31 : Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise03_64 stime=1429706546
cmdline="               posix_fadvise03_64"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise03_64    1  TPASS  :  expected failure - returned value = 22, advise = 6 : Invalid argument
posix_fadvise03_64    2  TPASS  :  expected failure - returned value = 22, advise = 7 : Invalid argument
posix_fadvise03_64    3  TPASS  :  expected failure - returned value = 22, advise = 8 : Invalid argument
posix_fadvise03_64    4  TPASS  :  expected failure - returned value = 22, advise = 9 : Invalid argument
posix_fadvise03_64    5  TPASS  :  expected failure - returned value = 22, advise = 10 : Invalid argument
posix_fadvise03_64    6  TPASS  :  expected failure - returned value = 22, advise = 11 : Invalid argument
posix_fadvise03_64    7  TPASS  :  expected failure - returned value = 22, advise = 12 : Invalid argument
posix_fadvise03_64    8  TPASS  :  expected failure - returned value = 22, advise = 13 : Invalid argument
posix_fadvise03_64    9  TPASS  :  expected failure - returned value = 22, advise = 14 : Invalid argument
posix_fadvise03_64   10  TPASS  :  expected failure - returned value = 22, advise = 15 : Invalid argument
posix_fadvise03_64   11  TPASS  :  expected failure - returned value = 22, advise = 16 : Invalid argument
posix_fadvise03_64   12  TPASS  :  expected failure - returned value = 22, advise = 17 : Invalid argument
posix_fadvise03_64   13  TPASS  :  expected failure - returned value = 22, advise = 18 : Invalid argument
posix_fadvise03_64   14  TPASS  :  expected failure - returned value = 22, advise = 19 : Invalid argument
posix_fadvise03_64   15  TPASS  :  expected failure - returned value = 22, advise = 20 : Invalid argument
posix_fadvise03_64   16  TPASS  :  expected failure - returned value = 22, advise = 21 : Invalid argument
posix_fadvise03_64   17  TPASS  :  expected failure - returned value = 22, advise = 22 : Invalid argument
posix_fadvise03_64   18  TPASS  :  expected failure - returned value = 22, advise = 23 : Invalid argument
posix_fadvise03_64   19  TPASS  :  expected failure - returned value = 22, advise = 24 : Invalid argument
posix_fadvise03_64   20  TPASS  :  expected failure - returned value = 22, advise = 25 : Invalid argument
posix_fadvise03_64   21  TPASS  :  expected failure - returned value = 22, advise = 26 : Invalid argument
posix_fadvise03_64   22  TPASS  :  expected failure - returned value = 22, advise = 27 : Invalid argument
posix_fadvise03_64   23  TPASS  :  expected failure - returned value = 22, advise = 28 : Invalid argument
posix_fadvise03_64   24  TPASS  :  expected failure - returned value = 22, advise = 29 : Invalid argument
posix_fadvise03_64   25  TPASS  :  expected failure - returned value = 22, advise = 30 : Invalid argument
posix_fadvise03_64   26  TPASS  :  expected failure - returned value = 22, advise = 31 : Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise04 stime=1429706546
cmdline="                     posix_fadvise04"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise04    1  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04    2  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04    3  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04    4  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04    5  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04    6  TPASS  :  expected failure - returned value = 29 : Illegal seek
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=posix_fadvise04_64 stime=1429706546
cmdline="               posix_fadvise04_64"
contacts=""
analysis=exit
<<<test_output>>>
posix_fadvise04_64    1  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04_64    2  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04_64    3  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04_64    4  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04_64    5  TPASS  :  expected failure - returned value = 29 : Illegal seek
posix_fadvise04_64    6  TPASS  :  expected failure - returned value = 29 : Illegal seek
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchdir01 stime=1429706546
cmdline="fchdir01"
contacts=""
analysis=exit
<<<test_output>>>
fchdir01    1  TPASS  :  fchdir call succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchdir02 stime=1429706546
cmdline="fchdir02"
contacts=""
analysis=exit
<<<test_output>>>
fchdir02    1  TPASS  :  failed as expected with EBADF
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchdir03 stime=1429706546
cmdline="fchdir03"
contacts=""
analysis=exit
<<<test_output>>>
Got EACCES as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmod01 stime=1429706546
cmdline="fchmod01"
contacts=""
analysis=exit
<<<test_output>>>
fchmod01    1  TPASS  :  fchmod(tfile_14580, 0700) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmod02 stime=1429706546
cmdline="fchmod02"
contacts=""
analysis=exit
<<<test_output>>>
fchmod02    1  TPASS  :  Functionality of fchmod(7, 01777) Successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmod03 stime=1429706546
cmdline="fchmod03"
contacts=""
analysis=exit
<<<test_output>>>
fchmod03    1  TPASS  :  Functionality of fchmod(7, 01777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmod04 stime=1429706546
cmdline="fchmod04"
contacts=""
analysis=exit
<<<test_output>>>
fchmod04    1  TPASS  :  Functionality of fchmod(7, 01777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmod05 stime=1429706546
cmdline="fchmod05"
contacts=""
analysis=exit
<<<test_output>>>
fchmod05    1  TPASS  :  Functionality of fchmod(7, 041777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fchmod06 stime=1429706546
cmdline="fchmod06"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
fchmod06    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
fchmod06    0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
fchmod06    1  TPASS  :  fchmod: test EPERM success: TEST_ERRNO=EPERM(1): Operation not permitted
fchmod06    2  TPASS  :  fchmod: test EBADF success: TEST_ERRNO=EBADF(9): Bad file descriptor
fchmod06    3  TPASS  :  fchmod: test EROFS success: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmod07 stime=1429706546
cmdline="fchmod07"
contacts=""
analysis=exit
<<<test_output>>>
fchmod07    1  TPASS  :  Functionality of fchmod(7, 0) successful
fchmod07    2  TPASS  :  Functionality of fchmod(7, 07) successful
fchmod07    3  TPASS  :  Functionality of fchmod(7, 070) successful
fchmod07    4  TPASS  :  Functionality of fchmod(7, 0700) successful
fchmod07    5  TPASS  :  Functionality of fchmod(7, 0777) successful
fchmod07    6  TPASS  :  Functionality of fchmod(7, 02777) successful
fchmod07    7  TPASS  :  Functionality of fchmod(7, 04777) successful
fchmod07    8  TPASS  :  Functionality of fchmod(7, 06777) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchmodat01 stime=1429706546
cmdline="fchmodat01"
contacts=""
analysis=exit
<<<test_output>>>
fchmodat01    1  TPASS  :  fchmodat() returned the expected  errno 0: Success
fchmodat01    2  TPASS  :  fchmodat() returned the expected  errno 0: Success
fchmodat01    3  TPASS  :  fchmodat() returned the expected  errno 20: Not a directory
fchmodat01    4  TPASS  :  fchmodat() returned the expected  errno 9: Bad file descriptor
fchmodat01    5  TPASS  :  fchmodat() returned the expected  errno 0: Success
fchmodat01    6  TPASS  :  fchmodat() returned the expected  errno 0: Success
<<<execution_status>>>
[  110.248420] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem

initiation_status="ok"
duration=0 termination_type=exit
[  110.248764] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
ed termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
[  110.248923] EXT4-fs (loop0): re-mounted. Opts: (null)

tag=fchown01 stime=1429706546
cmdline="fchown01"
contacts=""
analysis=exit
<<<test_output>>>
fchown01    1  TPASS  :  fchown(fd, geteuid(), getegid()) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown01_16 stime=1429706546
cmdline="fchown01_16"
contacts=""
analysis=exit
<<<test_output>>>
fchown01    1  TPASS  :  fchown(fd, geteuid(), getegid()) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown02 stime=1429706546
cmdline="fchown02"
contacts=""
analysis=exit
<<<test_output>>>
fchown02    1  TPASS  :  fchown() on testfile1 succeeds : Setuid/Setgid bits cleared
fchown02    2  TPASS  :  fchown() on testfile2 succeeds : Setgid bit not cleared
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown02_16 stime=1429706546
cmdline="fchown02_16"
contacts=""
analysis=exit
<<<test_output>>>
fchown02    1  TPASS  :  fchown() on testfile1 succeeds : Setuid/Setgid bits cleared
fchown02    2  TPASS  :  fchown() on testfile2 succeeds : Setgid bit not cleared
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown03 stime=1429706546
cmdline="fchown03"
contacts=""
analysis=exit
<<<test_output>>>
fchown03    1  TPASS  :  fchown() on testfile succeeds: Setuid/gid bits cleared
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown03_16 stime=1429706546
cmdline="fchown03_16"
contacts=""
analysis=exit
<<<test_output>>>
fchown03    1  TPASS  :  fchown() on testfile succeeds: Setuid/gid bits cleared
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown04 stime=1429706546
cmdline="fchown04"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
fchown04    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
fchown04    0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
fchown04    1  TPASS  :  fchown failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
fchown04    2  TPASS  :  fchown failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
fchown04    3  TPASS  :  fchown failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fchown04_16 stime=1429706546
cmdline="fchown04_16"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
[  110.417090] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  110.417322] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
[  110.418753] EXT4-fs (loop0): re-mounted. Opts: (null)
fchown04    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
fchown04    0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
fchown04    1  TPASS  :  fchown failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
fchown04    2  TPASS  :  fchown failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
fchown04    3  TPASS  :  fchown failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown05 stime=1429706546
cmdline="fchown05"
contacts=""
analysis=exit
<<<test_output>>>
fchown05    1  TPASS  :  fchown() succeeds to Change Owner/Group ids of testfile
fchown05    2  TPASS  :  fchown() succeeds to Change Owner id only of testfile
fchown05    3  TPASS  :  fchown() succeeds to Change Owner id only of testfile
fchown05    4  TPASS  :  fchown() succeeds to Change Group id only of testfile
fchown05    5  TPASS  :  fchown() succeeds to Change Group id only of testfile
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchown05_16 stime=1429706546
cmdline="fchown05_16"
contacts=""
analysis=exit
<<<test_output>>>
fchown05    1  TPASS  :  fchown() succeeds to Change Owner/Group ids of testfile
fchown05    2  TPASS  :  fchown() succeeds to Change Owner id only of testfile
fchown05    3  TPASS  :  fchown() succeeds to Change Owner id only of testfile
fchown05    4  TPASS  :  fchown() succeeds to Change Group id only of testfile
fchown05    5  TPASS  :  fchown() succeeds to Change Group id only of testfile
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchownat01 stime=1429706546
cmdline="fchownat01"
contacts=""
analysis=exit
<<<test_output>>>
fchownat01    1  TPASS  :  fchownat() returned the expected errno 0: Success: TEST_ERRNO=SUCCESS(0): Success
fchownat01    2  TPASS  :  fchownat() returned the expected errno -1: Not a directory: TEST_ERRNO=ENOTDIR(20): Not a directory
fchownat01    3  TPASS  :  fchownat() returned the expected errno -1: Bad file descriptor: TEST_ERRNO=EBADF(9): Bad file descriptor
fchownat01    4  TPASS  :  fchownat() returned the expected errno -1: Invalid argument: TEST_ERRNO=EINVAL(22): Invalid argument
fchownat01    5  TPASS  :  fchownat() returned the expected errno 0: Success: TEST_ERRNO=SUCCESS(0): Success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fchownat02 stime=1429706546
cmdline="fchownat02"
contacts=""
analysis=exit
<<<test_output>>>
fchownat02    1  TPASS  :  fchownat() test AT_SYMLINK_NOFOLLOW success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl01 stime=1429706546
cmdline="fcntl01"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl01_64 stime=1429706546
cmdline="fcntl01_64"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl02 stime=1429706546
cmdline="fcntl02"
contacts=""
analysis=exit
<<<test_output>>>
fcntl02     1  TPASS  :  fcntl(tfile_14609, F_DUPFD, 0) returned 8
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl02_64 stime=1429706546
cmdline="fcntl02_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl02     1  TPASS  :  fcntl(tfile_14610, F_DUPFD, 0) returned 8
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl03 stime=1429706546
cmdline="fcntl03"
contacts=""
analysis=exit
<<<test_output>>>
fcntl03     1  TPASS  :  fcntl(tfile_14611, F_GETFD, 0) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl03_64 stime=1429706546
cmdline="fcntl03_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl03     1  TPASS  :  fcntl(tfile_14612, F_GETFD, 0) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl04 stime=1429706546
cmdline="fcntl04"
contacts=""
analysis=exit
<<<test_output>>>
fcntl04     1  TPASS  :  fcntl returned 32770
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl04_64 stime=1429706546
cmdline="fcntl04_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl04     1  TPASS  :  fcntl returned 32770
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl05 stime=1429706546
cmdline="fcntl05"
contacts=""
analysis=exit
<<<test_output>>>
fcntl05     1  TPASS  :  fcntl returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl05_64 stime=1429706546
cmdline="fcntl05_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl05     1  TPASS  :  fcntl returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl06 stime=1429706546
cmdline="fcntl06"
contacts=""
analysis=exit
<<<test_output>>>
fcntl06     1  TCONF  :  fcntl06.c:113: system doesn't have LINUX_LOCK_FILE_REGION support
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl06_64 stime=1429706546
cmdline="fcntl06_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl06     1  TCONF  :  fcntl06.c:113: system doesn't have LINUX_LOCK_FILE_REGION support
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl07 stime=1429706546
cmdline="fcntl07"
contacts=""
analysis=exit
<<<test_output>>>
fcntl07     1  TPASS  :  regular file CLOEXEC fd was closed after exec()
fcntl07     2  TPASS  :  pipe (write end) CLOEXEC fd was closed after exec()
fcntl07     3  TPASS  :  pipe (read end) CLOEXEC fd was closed after exec()
fcntl07     4  TPASS  :  fifo CLOEXEC fd was closed after exec()
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl07_64 stime=1429706546
cmdline="fcntl07_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl07     1  TPASS  :  regular file CLOEXEC fd was closed after exec()
fcntl07     2  TPASS  :  pipe (write end) CLOEXEC fd was closed after exec()
fcntl07     3  TPASS  :  pipe (read end) CLOEXEC fd was closed after exec()
fcntl07     4  TPASS  :  fifo CLOEXEC fd was closed after exec()
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl08 stime=1429706546
cmdline="fcntl08"
contacts=""
analysis=exit
<<<test_output>>>
fcntl08     1  TPASS  :  fcntl returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl08_64 stime=1429706546
cmdline="fcntl08_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl08     1  TPASS  :  fcntl returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl09 stime=1429706546
cmdline="fcntl09"
contacts=""
analysis=exit
<<<test_output>>>
fcntl09     1  TPASS  :  fcntl(./file_14631, F_SETLK, &flocks) flocks.l_type = F_WRLCK returned 0
fcntl09     2  TPASS  :  fcntl(./file_14631, F_SETLK, &flocks) flocks.l_type = F_UNLCK returned 0
fcntl09     1  TPASS  :  fcntl(./file_14631, F_SETLK, &flocks) flocks.l_type = F_RDLCK returned 0
fcntl09     2  TPASS  :  fcntl(./file_14631, F_SETLK, &flocks) flocks.l_type = F_UNLCK returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl09_64 stime=1429706546
cmdline="fcntl09_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl09     1  TPASS  :  fcntl(./file_14632, F_SETLK, &flocks) flocks.l_type = F_WRLCK returned 0
fcntl09     2  TPASS  :  fcntl(./file_14632, F_SETLK, &flocks) flocks.l_type = F_UNLCK returned 0
fcntl09     1  TPASS  :  fcntl(./file_14632, F_SETLK, &flocks) flocks.l_type = F_RDLCK returned 0
fcntl09     2  TPASS  :  fcntl(./file_14632, F_SETLK, &flocks) flocks.l_type = F_UNLCK returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl10 stime=1429706546
cmdline="fcntl10"
contacts=""
analysis=exit
<<<test_output>>>
fcntl10     1  TPASS  :  fcntl(tfile_14633, F_SETLKW, &flocks) flocks.l_type = F_WRLCK returned 0
fcntl10     2  TPASS  :  fcntl(tfile_14633, F_SETLKW, &flocks) flocks.l_type = F_UNLCK returned 0
fcntl10     1  TPASS  :  fcntl(tfile_14633, F_SETLKW, &flocks) flocks.l_type = F_RDLCK returned 0
fcntl10     2  TPASS  :  fcntl(tfile_14633, F_SETLKW, &flocks) flocks.l_type = F_UNLCK returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl10_64 stime=1429706546
cmdline="fcntl10_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl10     1  TPASS  :  fcntl(tfile_14634, F_SETLKW, &flocks) flocks.l_type = F_WRLCK returned 0
fcntl10     2  TPASS  :  fcntl(tfile_14634, F_SETLKW, &flocks) flocks.l_type = F_UNLCK returned 0
fcntl10     1  TPASS  :  fcntl(tfile_14634, F_SETLKW, &flocks) flocks.l_type = F_RDLCK returned 0
fcntl10     2  TPASS  :  fcntl(tfile_14634, F_SETLKW, &flocks) flocks.l_type = F_UNLCK returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl11 stime=1429706546
cmdline="fcntl11"
contacts=""
analysis=exit
<<<test_output>>>
fcntl11     0  TINFO  :  Enter block 1
fcntl11     0  TINFO  :  Exit block 1
fcntl11     0  TINFO  :  Enter block 2
fcntl11     0  TINFO  :  Exit block 2
fcntl11     0  TINFO  :  Enter block 3
fcntl11     0  TINFO  :  Exit block 3
fcntl11     0  TINFO  :  Enter block 4
fcntl11     0  TINFO  :  Exit block 4
fcntl11     0  TINFO  :  Enter block 5
fcntl11     0  TINFO  :  Exit block 5
fcntl11     0  TINFO  :  Enter block 6
fcntl11     0  TINFO  :  Exit block 6
fcntl11     0  TINFO  :  Enter block 7
fcntl11     0  TINFO  :  Exit block 7
fcntl11     0  TINFO  :  Enter block 8
fcntl11     0  TINFO  :  Exit block 8
fcntl11     0  TINFO  :  Enter block 9
fcntl11     0  TINFO  :  Exit block 9
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl11_64 stime=1429706546
cmdline="fcntl11_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl11     0  TINFO  :  Enter block 1
fcntl11     0  TINFO  :  Exit block 1
fcntl11     0  TINFO  :  Enter block 2
fcntl11     0  TINFO  :  Exit block 2
fcntl11     0  TINFO  :  Enter block 3
fcntl11     0  TINFO  :  Exit block 3
fcntl11     0  TINFO  :  Enter block 4
fcntl11     0  TINFO  :  Exit block 4
fcntl11     0  TINFO  :  Enter block 5
fcntl11     0  TINFO  :  Exit block 5
fcntl11     0  TINFO  :  Enter block 6
fcntl11     0  TINFO  :  Exit block 6
fcntl11     0  TINFO  :  Enter block 7
fcntl11     0  TINFO  :  Exit block 7
fcntl11     0  TINFO  :  Enter block 8
fcntl11     0  TINFO  :  Exit block 8
fcntl11     0  TINFO  :  Enter block 9
fcntl11     0  TINFO  :  Exit block 9
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl12 stime=1429706546
cmdline="fcntl12"
contacts=""
analysis=exit
<<<test_output>>>
fcntl12     0  TINFO  :  Enter block 1
fcntl12     0  TINFO  :  Test for errno EMFILE
fcntl12     0  TINFO  :  block 1 PASSED
fcntl12     0  TINFO  :  Exit block 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl12_64 stime=1429706546
cmdline="fcntl12_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl12     0  TINFO  :  Enter block 1
fcntl12     0  TINFO  :  Test for errno EMFILE
fcntl12     0  TINFO  :  block 1 PASSED
fcntl12     0  TINFO  :  Exit block 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl13 stime=1429706546
cmdline="fcntl13"
contacts=""
analysis=exit
<<<test_output>>>
fcntl13     0  TINFO  :  Enter block 1
fcntl13     0  TINFO  :  Test for errno EINVAL
fcntl13     0  TINFO  :  block 1 PASSED
fcntl13     0  TINFO  :  Exit block 1
fcntl13     0  TINFO  :  Enter block 2
fcntl13     0  TINFO  :  Test for errno EFAULT
fcntl13     0  TINFO  :  block 2 PASSED
fcntl13     0  TINFO  :  Exit block 2
fcntl13     0  TINFO  :  Enter block 3
fcntl13     0  TINFO  :  Test for errno EINVAL
fcntl13     0  TINFO  :  block 3 PASSED
fcntl13     0  TINFO  :  Exit block 3
fcntl13     0  TINFO  :  Enter block 4
fcntl13     0  TINFO  :  Test for errno EBADF
fcntl13     0  TINFO  :  block 4 PASSED
fcntl13     0  TINFO  :  Exit block 4
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl13_64 stime=1429706546
cmdline="fcntl13_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl13     0  TINFO  :  Enter block 1
fcntl13     0  TINFO  :  Test for errno EINVAL
fcntl13     0  TINFO  :  block 1 PASSED
fcntl13     0  TINFO  :  Exit block 1
fcntl13     0  TINFO  :  Enter block 2
fcntl13     0  TINFO  :  Test for errno EFAULT
fcntl13     0  TINFO  :  block 2 PASSED
fcntl13     0  TINFO  :  Exit block 2
fcntl13     0  TINFO  :  Enter block 3
fcntl13     0  TINFO  :  Test for errno EINVAL
fcntl13     0  TINFO  :  block 3 PASSED
fcntl13     0  TINFO  :  Exit block 3
fcntl13     0  TINFO  :  Enter block 4
fcntl13     0  TINFO  :  Test for errno EBADF
fcntl13     0  TINFO  :  block 4 PASSED
fcntl13     0  TINFO  :  Exit block 4
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl14 stime=1429706546
cmdline="fcntl14"
contacts=""
analysis=exit
<<<test_output>>>
fcntl14     0  TINFO  :  Enter block 1: without mandatory locking
fcntl14     1  TPASS  :  testcase:1 PASSED
fcntl14     2  TPASS  :  testcase:2 PASSED
fcntl14     3  TPASS  :  testcase:3 PASSED
fcntl14     4  TPASS  :  testcase:4 PASSED
fcntl14     5  TPASS  :  testcase:5 PASSED
fcntl14     6  TPASS  :  testcase:6 PASSED
fcntl14     7  TPASS  :  testcase:7 PASSED
fcntl14     8  TPASS  :  testcase:8 PASSED
fcntl14     9  TPASS  :  testcase:9 PASSED
fcntl14    10  TPASS  :  testcase:10 PASSED
fcntl14    11  TPASS  :  testcase:11 PASSED
fcntl14    12  TPASS  :  testcase:12 PASSED
fcntl14    13  TPASS  :  testcase:13 PASSED
fcntl14    14  TPASS  :  testcase:14 PASSED
fcntl14    15  TPASS  :  testcase:15 PASSED
fcntl14    16  TPASS  :  testcase:16 PASSED
fcntl14    17  TPASS  :  testcase:17 PASSED
fcntl14    18  TPASS  :  testcase:18 PASSED
fcntl14    19  TPASS  :  testcase:19 PASSED
fcntl14    20  TPASS  :  testcase:20 PASSED
fcntl14    21  TPASS  :  testcase:21 PASSED
fcntl14    22  TPASS  :  testcase:22 PASSED
fcntl14    23  TPASS  :  testcase:23 PASSED
fcntl14    24  TPASS  :  testcase:24 PASSED
fcntl14    25  TPASS  :  testcase:25 PASSED
fcntl14    26  TPASS  :  testcase:26 PASSED
fcntl14    27  TPASS  :  testcase:27 PASSED
fcntl14    28  TPASS  :  testcase:28 PASSED
fcntl14    29  TPASS  :  testcase:29 PASSED
fcntl14    30  TPASS  :  testcase:30 PASSED
fcntl14    31  TPASS  :  testcase:31 PASSED
fcntl14    32  TPASS  :  testcase:32 PASSED
fcntl14    33  TPASS  :  testcase:33 PASSED
fcntl14    34  TPASS  :  testcase:34 PASSED
fcntl14    35  TPASS  :  testcase:35 PASSED
fcntl14    36  TPASS  :  testcase:36 PASSED
fcntl14    37  TPASS  :  Block 1, test 1 PASSED
fcntl14    38  TPASS  :  testcase:37 PASSED
fcntl14    39  TPASS  :  testcase:38 PASSED
fcntl14    40  TPASS  :  testcase:39 PASSED
fcntl14    41  TPASS  :  testcase:40 PASSED
fcntl14    42  TPASS  :  testcase:41 PASSED
fcntl14    43  TPASS  :  testcase:42 PASSED
fcntl14    44  TPASS  :  testcase:43 PASSED
fcntl14    45  TPASS  :  testcase:44 PASSED
fcntl14    46  TPASS  :  testcase:45 PASSED
fcntl14    47  TPASS  :  Block 1, test 2 PASSED
fcntl14     0  TINFO  :  Exit block 1
fcntl14     0  TINFO  :  Enter block 2: with mandatory locking
fcntl14    48  TPASS  :  testcase:1 PASSED
fcntl14    49  TPASS  :  testcase:2 PASSED
fcntl14    50  TPASS  :  testcase:3 PASSED
fcntl14    51  TPASS  :  testcase:4 PASSED
fcntl14    52  TPASS  :  testcase:5 PASSED
fcntl14    53  TPASS  :  testcase:6 PASSED
fcntl14    54  TPASS  :  testcase:7 PASSED
fcntl14    55  TPASS  :  testcase:8 PASSED
fcntl14    56  TPASS  :  testcase:9 PASSED
fcntl14    57  TPASS  :  testcase:10 PASSED
fcntl14    58  TPASS  :  testcase:11 PASSED
fcntl14    59  TPASS  :  testcase:12 PASSED
fcntl14    60  TPASS  :  testcase:13 PASSED
fcntl14    61  TPASS  :  testcase:14 PASSED
fcntl14    62  TPASS  :  testcase:15 PASSED
fcntl14    63  TPASS  :  testcase:16 PASSED
fcntl14    64  TPASS  :  testcase:17 PASSED
fcntl14    65  TPASS  :  testcase:18 PASSED
fcntl14    66  TPASS  :  testcase:19 PASSED
fcntl14    67  TPASS  :  testcase:20 PASSED
fcntl14    68  TPASS  :  testcase:21 PASSED
fcntl14    69  TPASS  :  testcase:22 PASSED
fcntl14    70  TPASS  :  testcase:23 PASSED
fcntl14    71  TPASS  :  testcase:24 PASSED
fcntl14    72  TPASS  :  testcase:25 PASSED
fcntl14    73  TPASS  :  testcase:26 PASSED
fcntl14    74  TPASS  :  testcase:27 PASSED
fcntl14    75  TPASS  :  testcase:28 PASSED
fcntl14    76  TPASS  :  testcase:29 PASSED
fcntl14    77  TPASS  :  testcase:30 PASSED
fcntl14    78  TPASS  :  testcase:31 PASSED
fcntl14    79  TPASS  :  testcase:32 PASSED
fcntl14    80  TPASS  :  testcase:33 PASSED
fcntl14    81  TPASS  :  testcase:34 PASSED
fcntl14    82  TPASS  :  testcase:35 PASSED
fcntl14    83  TPASS  :  testcase:36 PASSED
fcntl14    84  TPASS  :  Block 2, test 1 PASSED
fcntl14    85  TPASS  :  testcase:37 PASSED
fcntl14    86  TPASS  :  testcase:38 PASSED
fcntl14    87  TPASS  :  testcase:39 PASSED
fcntl14    88  TPASS  :  testcase:40 PASSED
fcntl14    89  TPASS  :  testcase:41 PASSED
fcntl14    90  TPASS  :  testcase:42 PASSED
fcntl14    91  TPASS  :  testcase:43 PASSED
fcntl14    92  TPASS  :  testcase:44 PASSED
fcntl14    93  TPASS  :  testcase:45 PASSED
fcntl14    94  TPASS  :  Block 2, test 2 PASSED
fcntl14     0  TINFO  :  Exit block 2
fcntl14     0  TINFO  :  Enter block 3
fcntl14    95  TPASS  :  Test with negative whence locking PASSED
fcntl14     0  TINFO  :  Exit block 3
fcntl14     0  TINFO  :  Enter block 4
fcntl14    96  TPASS  :  Test of locks on file PASSED
fcntl14     0  TINFO  :  Exit block 4
<<<execution_status>>>
initiation_status="ok"
duration=5 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=fcntl14_64 stime=1429706551
cmdline="fcntl14_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl14     0  TINFO  :  Enter block 1: without mandatory locking
fcntl14     1  TPASS  :  testcase:1 PASSED
fcntl14     2  TPASS  :  testcase:2 PASSED
fcntl14     3  TPASS  :  testcase:3 PASSED
fcntl14     4  TPASS  :  testcase:4 PASSED
fcntl14     5  TPASS  :  testcase:5 PASSED
fcntl14     6  TPASS  :  testcase:6 PASSED
fcntl14     7  TPASS  :  testcase:7 PASSED
fcntl14     8  TPASS  :  testcase:8 PASSED
fcntl14     9  TPASS  :  testcase:9 PASSED
fcntl14    10  TPASS  :  testcase:10 PASSED
fcntl14    11  TPASS  :  testcase:11 PASSED
fcntl14    12  TPASS  :  testcase:12 PASSED
fcntl14    13  TPASS  :  testcase:13 PASSED
fcntl14    14  TPASS  :  testcase:14 PASSED
fcntl14    15  TPASS  :  testcase:15 PASSED
fcntl14    16  TPASS  :  testcase:16 PASSED
fcntl14    17  TPASS  :  testcase:17 PASSED
fcntl14    18  TPASS  :  testcase:18 PASSED
fcntl14    19  TPASS  :  testcase:19 PASSED
fcntl14    20  TPASS  :  testcase:20 PASSED
fcntl14    21  TPASS  :  testcase:21 PASSED
fcntl14    22  TPASS  :  testcase:22 PASSED
fcntl14    23  TPASS  :  testcase:23 PASSED
fcntl14    24  TPASS  :  testcase:24 PASSED
fcntl14    25  TPASS  :  testcase:25 PASSED
fcntl14    26  TPASS  :  testcase:26 PASSED
fcntl14    27  TPASS  :  testcase:27 PASSED
fcntl14    28  TPASS  :  testcase:28 PASSED
fcntl14    29  TPASS  :  testcase:29 PASSED
fcntl14    30  TPASS  :  testcase:30 PASSED
fcntl14    31  TPASS  :  testcase:31 PASSED
fcntl14    32  TPASS  :  testcase:32 PASSED
fcntl14    33  TPASS  :  testcase:33 PASSED
fcntl14    34  TPASS  :  testcase:34 PASSED
fcntl14    35  TPASS  :  testcase:35 PASSED
fcntl14    36  TPASS  :  testcase:36 PASSED
fcntl14    37  TPASS  :  Block 1, test 1 PASSED
fcntl14    38  TPASS  :  testcase:37 PASSED
fcntl14    39  TPASS  :  testcase:38 PASSED
fcntl14    40  TPASS  :  testcase:39 PASSED
fcntl14    41  TPASS  :  testcase:40 PASSED
fcntl14    42  TPASS  :  testcase:41 PASSED
fcntl14    43  TPASS  :  testcase:42 PASSED
fcntl14    44  TPASS  :  testcase:43 PASSED
fcntl14    45  TPASS  :  testcase:44 PASSED
fcntl14    46  TPASS  :  testcase:45 PASSED
fcntl14    47  TPASS  :  Block 1, test 2 PASSED
fcntl14     0  TINFO  :  Exit block 1
fcntl14     0  TINFO  :  Enter block 2: with mandatory locking
fcntl14    48  TPASS  :  testcase:1 PASSED
fcntl14    49  TPASS  :  testcase:2 PASSED
fcntl14    50  TPASS  :  testcase:3 PASSED
fcntl14    51  TPASS  :  testcase:4 PASSED
fcntl14    52  TPASS  :  testcase:5 PASSED
fcntl14    53  TPASS  :  testcase:6 PASSED
fcntl14    54  TPASS  :  testcase:7 PASSED
fcntl14    55  TPASS  :  testcase:8 PASSED
fcntl14    56  TPASS  :  testcase:9 PASSED
fcntl14    57  TPASS  :  testcase:10 PASSED
fcntl14    58  TPASS  :  testcase:11 PASSED
fcntl14    59  TPASS  :  testcase:12 PASSED
fcntl14    60  TPASS  :  testcase:13 PASSED
fcntl14    61  TPASS  :  testcase:14 PASSED
fcntl14    62  TPASS  :  testcase:15 PASSED
fcntl14    63  TPASS  :  testcase:16 PASSED
fcntl14    64  TPASS  :  testcase:17 PASSED
fcntl14    65  TPASS  :  testcase:18 PASSED
fcntl14    66  TPASS  :  testcase:19 PASSED
fcntl14    67  TPASS  :  testcase:20 PASSED
fcntl14    68  TPASS  :  testcase:21 PASSED
fcntl14    69  TPASS  :  testcase:22 PASSED
fcntl14    70  TPASS  :  testcase:23 PASSED
fcntl14    71  TPASS  :  testcase:24 PASSED
fcntl14    72  TPASS  :  testcase:25 PASSED
fcntl14    73  TPASS  :  testcase:26 PASSED
fcntl14    74  TPASS  :  testcase:27 PASSED
fcntl14    75  TPASS  :  testcase:28 PASSED
fcntl14    76  TPASS  :  testcase:29 PASSED
fcntl14    77  TPASS  :  testcase:30 PASSED
fcntl14    78  TPASS  :  testcase:31 PASSED
fcntl14    79  TPASS  :  testcase:32 PASSED
fcntl14    80  TPASS  :  testcase:33 PASSED
fcntl14    81  TPASS  :  testcase:34 PASSED
fcntl14    82  TPASS  :  testcase:35 PASSED
fcntl14    83  TPASS  :  testcase:36 PASSED
fcntl14    84  TPASS  :  Block 2, test 1 PASSED
fcntl14    85  TPASS  :  testcase:37 PASSED
fcntl14    86  TPASS  :  testcase:38 PASSED
fcntl14    87  TPASS  :  testcase:39 PASSED
fcntl14    88  TPASS  :  testcase:40 PASSED
fcntl14    89  TPASS  :  testcase:41 PASSED
fcntl14    90  TPASS  :  testcase:42 PASSED
fcntl14    91  TPASS  :  testcase:43 PASSED
fcntl14    92  TPASS  :  testcase:44 PASSED
fcntl14    93  TPASS  :  testcase:45 PASSED
fcntl14    94  TPASS  :  Block 2, test 2 PASSED
fcntl14     0  TINFO  :  Exit block 2
fcntl14     0  TINFO  :  Enter block 3
fcntl14    95  TPASS  :  Test with negative whence locking PASSED
fcntl14     0  TINFO  :  Exit block 3
fcntl14     0  TINFO  :  Enter block 4
fcntl14    96  TPASS  :  Test of locks on file PASSED
fcntl14     0  TINFO  :  Exit block 4
<<<execution_status>>>
initiation_status="ok"
duration=6 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=fcntl15 stime=1429706557
cmdline="fcntl15"
contacts=""
analysis=exit
<<<test_output>>>
fcntl15     0  TINFO  :  Entering block 1
fcntl15     0  TINFO  :  Test 1: test with "dup" PASSED
fcntl15     0  TINFO  :  Exiting block 1
fcntl15     0  TINFO  :  Entering block 2
fcntl15     0  TINFO  :  Failed to record test working dir
fcntl15     0  TINFO  :  Test 2: test with "open" PASSED
fcntl15     0  TINFO  :  Exiting block 2
fcntl15     0  TINFO  :  Entering block 3
fcntl15     0  TINFO  :  Failed to record test working dir
fcntl15     0  TINFO  :  Test 3: test with "fork" PASSED
fcntl15     0  TINFO  :  Exiting block 3
<<<execution_status>>>
initiation_status="ok"
duration=10 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl15_64 stime=1429706567
cmdline="fcntl15_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl15     0  TINFO  :  Entering block 1
fcntl15     0  TINFO  :  Test 1: test with "dup" PASSED
fcntl15     0  TINFO  :  Exiting block 1
fcntl15     0  TINFO  :  Entering block 2
fcntl15     0  TINFO  :  Failed to record test working dir
fcntl15     0  TINFO  :  Test 2: test with "open" PASSED
fcntl15     0  TINFO  :  Exiting block 2
fcntl15     0  TINFO  :  Entering block 3
fcntl15     0  TINFO  :  Failed to record test working dir
fcntl15     0  TINFO  :  Test 3: test with "fork" PASSED
fcntl15     0  TINFO  :  Exiting block 3
<<<execution_status>>>
initiation_status="ok"
duration=10 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl16 stime=1429706577
cmdline="fcntl16"
contacts=""
analysis=exit
<<<test_output>>>
fcntl16     0  TINFO  :  Entering block 1
fcntl16     0  TINFO  :  Test case 1: without manadatory locking PASSED
fcntl16     0  TINFO  :  Exiting block 1
fcntl16     0  TINFO  :  Entering block 2
fcntl16     0  TINFO  :  Test case 2: with mandatory record locking PASSED
fcntl16     0  TINFO  :  Exiting block 2
fcntl16     0  TINFO  :  Entering block 3
fcntl16     0  TINFO  :  Test case 3: mandatory locking with NODELAY PASSED
fcntl16     0  TINFO  :  Exiting block 3
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl16_64 stime=1429706577
cmdline="fcntl16_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl16     0  TINFO  :  Entering block 1
fcntl16     0  TINFO  :  Test case 1: without manadatory locking PASSED
fcntl16     0  TINFO  :  Exiting block 1
fcntl16     0  TINFO  :  Entering block 2
fcntl16     0  TINFO  :  Test case 2: with mandatory record locking PASSED
fcntl16     0  TINFO  :  Exiting block 2
fcntl16     0  TINFO  :  Entering block 3
fcntl16     0  TINFO  :  Test case 3: mandatory locking with NODELAY PASSED
fcntl16     0  TINFO  :  Exiting block 3
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl17 stime=1429706577
cmdline="fcntl17"
contacts=""
analysis=exit
<<<test_output>>>
fcntl17     0  TINFO  :  Enter preparation phase
fcntl17     0  TINFO  :  child 3 starting
fcntl17     0  TINFO  :  child 3 pid 14962 locked
fcntl17     0  TINFO  :  child 3 resuming
fcntl17     0  TINFO  :  child 3 lockw err 35
fcntl17     0  TINFO  :  child 3 exiting
fcntl17     0  TINFO  :  child 1 starting
fcntl17     0  TINFO  :  child 1 pid 14960 locked
fcntl17     0  TINFO  :  child 1 resuming
fcntl17     0  TINFO  :  child 1 unlocked
fcntl17     0  TINFO  :  child 1 exiting
fcntl17     0  TINFO  :  child 2 starting
fcntl17     0  TINFO  :  child 2 pid 14961 locked
fcntl17     0  TINFO  :  child 2 resuming
fcntl17     0  TINFO  :  child 2 lockw locked
fcntl17     0  TINFO  :  child 2 exiting
fcntl17     0  TINFO  :  Exit preparation phase
fcntl17     0  TINFO  :  Enter block 1
fcntl17     0  TINFO  :  Block 1 PASSED
fcntl17     0  TINFO  :  Exit block 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl17_64 stime=1429706577
cmdline="fcntl17_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl17     0  TINFO  :  Enter preparation phase
fcntl17     0  TINFO  :  child 3 starting
fcntl17     0  TINFO  :  child 3 pid 14966 locked
fcntl17     0  TINFO  :  child 3 resuming
fcntl17     0  TINFO  :  child 3 lockw err 35
fcntl17     0  TINFO  :  child 3 exiting
fcntl17     0  TINFO  :  child 1 starting
fcntl17     0  TINFO  :  child 1 pid 14964 locked
fcntl17     0  TINFO  :  child 1 resuming
fcntl17     0  TINFO  :  child 1 unlocked
fcntl17     0  TINFO  :  child 1 exiting
fcntl17     0  TINFO  :  child 2 starting
fcntl17     0  TINFO  :  child 2 pid 14965 locked
fcntl17     0  TINFO  :  child 2 resuming
fcntl17     0  TINFO  :  child 2 lockw locked
fcntl17     0  TINFO  :  child 2 exiting
fcntl17     0  TINFO  :  Exit preparation phase
fcntl17     0  TINFO  :  Enter block 1
fcntl17     0  TINFO  :  Block 1 PASSED
fcntl17     0  TINFO  :  Exit block 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl18 stime=1429706577
cmdline="fcntl18"
contacts=""
analysis=exit
<<<test_output>>>
fcntl18     0  TINFO  :  Enter block 1
fcntl18     1  TPASS  :  Test F_GETLK: for errno EFAULT PASSED
fcntl18     0  TINFO  :  Block 1 PASSED
fcntl18     0  TINFO  :  Exit block 1
fcntl18     0  TINFO  :  Enter block 2
fcntl18     2  TPASS  :  Test F_GETLK64: for errno EFAULT PASSED
fcntl18     0  TINFO  :  Block 2 PASSED
fcntl18     0  TINFO  :  Exit block 2
fcntl18     0  TINFO  :  Enter block 3
fcntl18     3  TPASS  :  Test for errno EINVAL PASSED
fcntl18     0  TINFO  :  Block 3 PASSED
fcntl18     0  TINFO  :  Exit block 3
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl18_64 stime=1429706577
cmdline="fcntl18_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl18     0  TINFO  :  Enter block 1
fcntl18     1  TPASS  :  Test F_GETLK: for errno EFAULT PASSED
fcntl18     0  TINFO  :  Block 1 PASSED
fcntl18     0  TINFO  :  Exit block 1
fcntl18     0  TINFO  :  Enter block 2
fcntl18     2  TPASS  :  Test F_GETLK64: for errno EFAULT PASSED
fcntl18     0  TINFO  :  Block 2 PASSED
fcntl18     0  TINFO  :  Exit block 2
fcntl18     0  TINFO  :  Enter block 3
fcntl18     3  TPASS  :  Test for errno EINVAL PASSED
fcntl18     0  TINFO  :  Block 3 PASSED
fcntl18     0  TINFO  :  Exit block 3
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl19 stime=1429706577
cmdline="fcntl19"
contacts=""
analysis=exit
<<<test_output>>>
fcntl19     0  TINFO  :  Enter block 1
fcntl19     0  TINFO  :  Test block 1: PASSED
fcntl19     0  TINFO  :  Exit block 1
fcntl19     0  TINFO  :  Enter block 2
fcntl19     0  TINFO  :  Test block 2: PASSED
fcntl19     0  TINFO  :  Exit block 2
fcntl19     0  TINFO  :  Enter block 3
fcntl19     0  TINFO  :  Test block 3: PASSED
fcntl19     0  TINFO  :  Exit block 3
fcntl19     0  TINFO  :  Enter blcok 4
fcntl19     0  TINFO  :  Test block 4: PASSED
fcntl19     0  TINFO  :  Exit block 4
fcntl19     0  TINFO  :  Enter block 5
fcntl19     0  TINFO  :  Test block 5: PASSED
fcntl19     0  TINFO  :  Exit block 5
fcntl19     0  TINFO  :  Enter block 6
fcntl19     0  TINFO  :  Test block 6: PASSED
fcntl19     0  TINFO  :  Exit block 6
fcntl19     0  TINFO  :  Enter block 7
fcntl19     0  TINFO  :  Test block 7: PASSED
fcntl19     0  TINFO  :  Exit block 7
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl19_64 stime=1429706577
cmdline="fcntl19_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl19     0  TINFO  :  Enter block 1
fcntl19     0  TINFO  :  Test block 1: PASSED
fcntl19     0  TINFO  :  Exit block 1
fcntl19     0  TINFO  :  Enter block 2
fcntl19     0  TINFO  :  Test block 2: PASSED
fcntl19     0  TINFO  :  Exit block 2
fcntl19     0  TINFO  :  Enter block 3
fcntl19     0  TINFO  :  Test block 3: PASSED
fcntl19     0  TINFO  :  Exit block 3
fcntl19     0  TINFO  :  Enter blcok 4
fcntl19     0  TINFO  :  Test block 4: PASSED
fcntl19     0  TINFO  :  Exit block 4
fcntl19     0  TINFO  :  Enter block 5
fcntl19     0  TINFO  :  Test block 5: PASSED
fcntl19     0  TINFO  :  Exit block 5
fcntl19     0  TINFO  :  Enter block 6
fcntl19     0  TINFO  :  Test block 6: PASSED
fcntl19     0  TINFO  :  Exit block 6
fcntl19     0  TINFO  :  Enter block 7
fcntl19     0  TINFO  :  Test block 7: PASSED
fcntl19     0  TINFO  :  Exit block 7
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl20 stime=1429706577
cmdline="fcntl20"
contacts=""
analysis=exit
<<<test_output>>>
fcntl20     0  TINFO  :  Enter block 1
fcntl20     0  TINFO  :  Test block 1: PASSED
fcntl20     0  TINFO  :  Exit block 1
fcntl20     0  TINFO  :  Enter block 2
fcntl20     0  TINFO  :  Test block 2: PASSED
fcntl20     0  TINFO  :  Exit block 2
fcntl20     0  TINFO  :  Enter block 3
fcntl20     0  TINFO  :  Test block 3: PASSED
fcntl20     0  TINFO  :  Exit block 3
fcntl20     0  TINFO  :  Enter blcok 4
fcntl20     0  TINFO  :  Test block 4: PASSED
fcntl20     0  TINFO  :  Exit block 4
fcntl20     0  TINFO  :  Enter block 5
fcntl20     0  TINFO  :  Test block 5: PASSED
fcntl20     0  TINFO  :  Exit block 5
fcntl20     0  TINFO  :  Enter block 6
fcntl20     0  TINFO  :  Test block 6: PASSED
fcntl20     0  TINFO  :  Exit block 6
fcntl20     0  TINFO  :  Enter block 7
fcntl20     0  TINFO  :  Test block 7: PASSED
fcntl20     0  TINFO  :  Exit block 7
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl20_64 stime=1429706577
cmdline="fcntl20_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl20     0  TINFO  :  Enter block 1
fcntl20     0  TINFO  :  Test block 1: PASSED
fcntl20     0  TINFO  :  Exit block 1
fcntl20     0  TINFO  :  Enter block 2
fcntl20     0  TINFO  :  Test block 2: PASSED
fcntl20     0  TINFO  :  Exit block 2
fcntl20     0  TINFO  :  Enter block 3
fcntl20     0  TINFO  :  Test block 3: PASSED
fcntl20     0  TINFO  :  Exit block 3
fcntl20     0  TINFO  :  Enter blcok 4
fcntl20     0  TINFO  :  Test block 4: PASSED
fcntl20     0  TINFO  :  Exit block 4
fcntl20     0  TINFO  :  Enter block 5
fcntl20     0  TINFO  :  Test block 5: PASSED
fcntl20     0  TINFO  :  Exit block 5
fcntl20     0  TINFO  :  Enter block 6
fcntl20     0  TINFO  :  Test block 6: PASSED
fcntl20     0  TINFO  :  Exit block 6
fcntl20     0  TINFO  :  Enter block 7
fcntl20     0  TINFO  :  Test block 7: PASSED
fcntl20     0  TINFO  :  Exit block 7
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl21 stime=1429706577
cmdline="fcntl21"
contacts=""
analysis=exit
<<<test_output>>>
fcntl21     0  TINFO  :  Enter block 1
fcntl21     0  TINFO  :  Test block 1: PASSED
fcntl21     0  TINFO  :  Exit block 1
fcntl21     0  TINFO  :  Enter block 2
fcntl21     0  TINFO  :  Test block 2: PASSED
fcntl21     0  TINFO  :  Exit block 2
fcntl21     0  TINFO  :  Enter block 3
fcntl21     0  TINFO  :  Test block 3 : PASSED
fcntl21     0  TINFO  :  Exit block 3
fcntl21     0  TINFO  :  Enter block 4
fcntl21     0  TINFO  :  Test block 4: PASSED
fcntl21     0  TINFO  :  Exit block 4
fcntl21     0  TINFO  :  Enter block 5
fcntl21     0  TINFO  :  Test block 5: PASSED
fcntl21     0  TINFO  :  Exit block 5
fcntl21     0  TINFO  :  Enter block 6
fcntl21     0  TINFO  :  Test block 6 PASSED
fcntl21     0  TINFO  :  Exit block 6
fcntl21     0  TINFO  :  Enter block 7
fcntl21     0  TINFO  :  Test block 7: PASSED
fcntl21     0  TINFO  :  Exit block 7
fcntl21     0  TINFO  :  Enter block 8
fcntl21     0  TINFO  :  Test block 8: PASSED
fcntl21     0  TINFO  :  Exit block 8
fcntl21     0  TINFO  :  Enter block 9
fcntl21     0  TINFO  :  Test block 9: PASSED
fcntl21     0  TINFO  :  Exit block 9
fcntl21     0  TINFO  :  Enter block 10
fcntl21     0  TINFO  :  Test block 10: PASSED
fcntl21     0  TINFO  :  Exit block 10
fcntl21     0  TINFO  :  Enter block 11
fcntl21     0  TINFO  :  Test block 11: PASSED
fcntl21     0  TINFO  :  Exit block 11
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl21_64 stime=1429706577
cmdline="fcntl21_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl21     0  TINFO  :  Enter block 1
fcntl21     0  TINFO  :  Test block 1: PASSED
fcntl21     0  TINFO  :  Exit block 1
fcntl21     0  TINFO  :  Enter block 2
fcntl21     0  TINFO  :  Test block 2: PASSED
fcntl21     0  TINFO  :  Exit block 2
fcntl21     0  TINFO  :  Enter block 3
fcntl21     0  TINFO  :  Test block 3 : PASSED
fcntl21     0  TINFO  :  Exit block 3
fcntl21     0  TINFO  :  Enter block 4
fcntl21     0  TINFO  :  Test block 4: PASSED
fcntl21     0  TINFO  :  Exit block 4
fcntl21     0  TINFO  :  Enter block 5
fcntl21     0  TINFO  :  Test block 5: PASSED
fcntl21     0  TINFO  :  Exit block 5
fcntl21     0  TINFO  :  Enter block 6
fcntl21     0  TINFO  :  Test block 6 PASSED
fcntl21     0  TINFO  :  Exit block 6
fcntl21     0  TINFO  :  Enter block 7
fcntl21     0  TINFO  :  Test block 7: PASSED
fcntl21     0  TINFO  :  Exit block 7
fcntl21     0  TINFO  :  Enter block 8
fcntl21     0  TINFO  :  Test block 8: PASSED
fcntl21     0  TINFO  :  Exit block 8
fcntl21     0  TINFO  :  Enter block 9
fcntl21     0  TINFO  :  Test block 9: PASSED
fcntl21     0  TINFO  :  Exit block 9
fcntl21     0  TINFO  :  Enter block 10
fcntl21     0  TINFO  :  Test block 10: PASSED
fcntl21     0  TINFO  :  Exit block 10
fcntl21     0  TINFO  :  Enter block 11
fcntl21     0  TINFO  :  Test block 11: PASSED
fcntl21     0  TINFO  :  Exit block 11
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl22 stime=1429706577
cmdline="fcntl22"
contacts=""
analysis=exit
<<<test_output>>>
fcntl22     1  TPASS  :  fcntl() fails with expected error EAGAIN errno:11
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl22_64 stime=1429706577
cmdline="fcntl22_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl22     1  TPASS  :  fcntl() fails with expected error EAGAIN errno:11
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl23 stime=1429706577
cmdline="fcntl23"
contacts=""
analysis=exit
<<<test_output>>>
fcntl23     1  TPASS  :  fcntl(tfile_14987, F_SETLEASE, F_RDLCK)
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl23_64 stime=1429706577
cmdline="fcntl23_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl23     1  TPASS  :  fcntl(tfile_14988, F_SETLEASE, F_RDLCK)
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl24 stime=1429706577
cmdline="fcntl24"
contacts=""
analysis=exit
<<<test_output>>>
fcntl24     1  TCONF  :  fcntl24.c:133: Cannot do fcntl on a file on TMPFS filesystem
fcntl24     2  TCONF  :  fcntl24.c:133: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl24_64 stime=1429706577
cmdline="fcntl24_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl24     1  TCONF  :  fcntl24.c:133: Cannot do fcntl on a file on TMPFS filesystem
fcntl24     2  TCONF  :  fcntl24.c:133: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl25 stime=1429706577
cmdline="fcntl25"
contacts=""
analysis=exit
<<<test_output>>>
fcntl25     1  TCONF  :  fcntl25.c:134: Cannot do fcntl on a file on TMPFS filesystem
fcntl25     2  TCONF  :  fcntl25.c:134: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl25_64 stime=1429706577
cmdline="fcntl25_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl25     1  TCONF  :  fcntl25.c:134: Cannot do fcntl on a file on TMPFS filesystem
fcntl25     2  TCONF  :  fcntl25.c:134: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl26 stime=1429706577
cmdline="fcntl26"
contacts=""
analysis=exit
<<<test_output>>>
fcntl26     1  TCONF  :  fcntl26.c:134: Cannot do fcntl on a file on TMPFS filesystem
fcntl26     2  TCONF  :  fcntl26.c:134: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl26_64 stime=1429706577
cmdline="fcntl26_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl26     1  TCONF  :  fcntl26.c:134: Cannot do fcntl on a file on TMPFS filesystem
fcntl26     2  TCONF  :  fcntl26.c:134: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl27 stime=1429706577
cmdline="fcntl27"
contacts=""
analysis=exit
<<<test_output>>>
fcntl27     1  TPASS  :  fcntl(fd, F_SETLEASE, F_RDLCK) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl27_64 stime=1429706577
cmdline="fcntl27_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl27     1  TPASS  :  fcntl(fd, F_SETLEASE, F_RDLCK) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl28 stime=1429706577
cmdline="fcntl28"
contacts=""
analysis=exit
<<<test_output>>>
fcntl28     1  TPASS  :  fcntl(fd, F_SETLEASE, F_RDLCK) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl28_64 stime=1429706577
cmdline="fcntl28_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl28     1  TPASS  :  fcntl(fd, F_SETLEASE, F_RDLCK) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl29 stime=1429706577
cmdline="fcntl29"
contacts=""
analysis=exit
<<<test_output>>>
fcntl29     1  TPASS  :  fcntl test F_DUPFD_CLOEXEC success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl29_64 stime=1429706577
cmdline="fcntl29_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl29     1  TPASS  :  fcntl test F_DUPFD_CLOEXEC success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl30 stime=1429706577
cmdline="fcntl30"
contacts=""
analysis=exit
<<<test_output>>>
fcntl30     0  TINFO  :  orig_pipe_size: 65536 new_pipe_size: 131072
fcntl30     1  TPASS  :  fcntl test F_GETPIPE_SZand F_SETPIPE_SZ success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fcntl30_64 stime=1429706577
cmdline="fcntl30_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl30     0  TINFO  :  orig_pipe_size: 65536 new_pipe_size: 131072
fcntl30     1  TPASS  :  fcntl test F_GETPIPE_SZand F_SETPIPE_SZ success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl31 stime=1429706577
cmdline="fcntl31"
contacts=""
analysis=exit
<<<test_output>>>
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     1  TPASS  :  fcntl test F_GETOWN, F_SETOWN for process ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     2  TPASS  :  fcntl test F_GETOWN, F_SETOWN for process group ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     3  TPASS  :  fcntl test F_GETOWN_EX, F_SETOWN_EX for thread ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     4  TPASS  :  fcntl test F_GETOWN_EX, F_SETOWN_EX for process ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     5  TPASS  :  fcntl test F_GETOWN_EX, F_SETOWN_EX for process group ID success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fcntl31_64 stime=1429706577
cmdline="fcntl31_64"
contacts=""
analysis=exit
<<<test_output>>>
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     1  TPASS  :  fcntl test F_GETOWN, F_SETOWN for process ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     2  TPASS  :  fcntl test F_GETOWN, F_SETOWN for process group ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     3  TPASS  :  fcntl test F_GETOWN_EX, F_SETOWN_EX for thread ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     4  TPASS  :  fcntl test F_GETOWN_EX, F_SETOWN_EX for process ID success
fcntl31     0  TINFO  :  default io events signal is SIGIO
fcntl31     5  TPASS  :  fcntl test F_GETOWN_EX, F_SETOWN_EX for process group ID success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fdatasync01 stime=1429706577
cmdline="fdatasync01"
contacts=""
analysis=exit
<<<test_output>>>
fdatasync01    1  TPASS  :  fdatasync() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fdatasync02 stime=1429706577
cmdline="fdatasync02"
contacts=""
analysis=exit
<<<test_output>>>
fdatasync02    1  TPASS  :  Expected failure for invalid file descriptor, errno: 9
fdatasync02    2  TPASS  :  Expected failure for file descriptor to a special file, errno: 22
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=flock01 stime=1429706577
cmdline="flock01"
contacts=""
analysis=exit
<<<test_output>>>
flock01     1  TPASS  :  flock() succeeded with Shared Lock, returned error number=0
flock01     2  TPASS  :  flock() succeeded with Unlock, returned error number=0
flock01     3  TPASS  :  flock() succeeded with Exclusive Lock, returned error number=0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=flock02 stime=1429706577
cmdline="flock02"
contacts=""
analysis=exit
<<<test_output>>>
flock02     1  TPASS  :  flock failed as expected with EBADF
flock02     2  TPASS  :  flock failed as expected with EINVAL
flock02     3  TPASS  :  flock failed as expected with EINVAL
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=flock03 stime=1429706577
cmdline="flock03"
contacts=""
analysis=exit
<<<test_output>>>
CHILD: File locked by parent unlocked
CHILD: Locking after unlock passed
flock03     1  TPASS  :  Parent: Initial attempt to flock() passed
flock03     2  TPASS  :  flock03 Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=flock04 stime=1429706577
cmdline="flock04"
contacts=""
analysis=exit
<<<test_output>>>
flock04     1  TPASS  :  flock() PASSED in acquiring shared lock on Share Locked file
flock04     1  TPASS  :  flock() failed to acquire exclusive lock on existing share locked file as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=flock05 stime=1429706577
cmdline="flock05"
contacts=""
analysis=exit
<<<test_output>>>
flock05     1  TPASS  :  flock() failed to acquire shared lock on an alreadyexclusive locked file as expected
flock05     1  TPASS  :  flock() failed to acquire exclusive lock on existing  exclusive locked file as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=flock06 stime=1429706577
cmdline="flock06"
contacts=""
analysis=exit
<<<test_output>>>
flock06     1  TPASS  :  First attempt to flock() passed
flock06     2  TPASS  :  Second attempt to flock() denied
flock06     3  TPASS  :  Unlocked fd1
flock06     4  TPASS  :  Third attempt to flock() succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fmtmsg01 stime=1429706577
cmdline="fmtmsg01"
contacts=""
analysis=exit
<<<test_output>>>
fmtms01     1  TPASS  :  Test passed
fmtms01     2  TPASS  :  Test passed
fmtms01     3  TPASS  :  Test passed
fmtms01     4  TPASS  :  Test passed
fmtms01     5  TPASS  :  Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fork01 stime=1429706577
cmdline="fork01"
contacts=""
analysis=exit
<<<test_output>>>
fork01      1  TPASS  :  fork() returned 15030
fork01      2  TPASS  :  child pid and fork() return agree: 15030
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fork02 stime=1429706577
cmdline="fork02"
contacts=""
analysis=exit
<<<test_output>>>
fork02      0  TINFO  :  Inside parent
fork02      0  TINFO  :  exit status of wait 0
fork02      1  TPASS  :  test 1 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fork03 stime=1429706577
cmdline="fork03"
contacts=""
analysis=exit
<<<test_output>>>
fork03      0  TINFO  :  process id in parent of child from fork : 15034
fork03      1  TPASS  :  test 1 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fork04 stime=1429706577
cmdline="fork04"
contacts=""
analysis=exit
<<<test_output>>>
fork04      1  TPASS  :  Env var TERM unchanged after fork(): getenv() does not find variable set
fork04      2  TPASS  :  Env var NoTSetzWq unchanged after fork(): getenv() does not find variable set
fork04      3  TPASS  :  Env var TESTPROG unchanged after fork(): FRKTCS04
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fork05 stime=1429706577
cmdline="fork05"
contacts=""
analysis=exit
<<<test_output>>>
fork05      0  TINFO  :  %fs test only for ix86
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fork06 stime=1429706577
cmdline="fork06"
contacts=""
analysis=exit
<<<test_output>>>
fork06      0  TINFO  :  tries 1000
fork06      0  TINFO  :  successes 1000
fork06      0  TINFO  :  failures 0
fork06      0  TINFO  :  There were no children to wait for
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=10
<<<test_end>>>
<<<test_start>>>
tag=fork07 stime=1429706577
cmdline="fork07"
contacts=""
analysis=exit
<<<test_output>>>
fork07      0  TINFO  :  Forking 100 children
fork07      0  TINFO  :  Forked all 100 children, now collecting
fork07      0  TINFO  :  Collected all 100 children
fork07      1  TPASS  :  100/100 children read correctly from an inheritted fd
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=2
<<<test_end>>>
<<<test_start>>>
tag=fork08 stime=1429706578
cmdline="fork08"
contacts=""
analysis=exit
<<<test_output>>>
fork08      0  TINFO  :  parent forksval: 1
fork08      0  TINFO  :  second child got char: b
fork08      1  TPASS  :  Test passed in childnumber 2
fork08      0  TINFO  :  parent forksval: 1
fork08      0  TINFO  :  parent forksval: 2
fork08      0  TINFO  :  exit status of wait  expected 0 got 0
fork08      1  TPASS  :  parent test PASSED
fork08      0  TINFO  :  exit status of wait  expected 0 got 0
fork08      2  TPASS  :  parent test PASSED
fork08      0  TINFO  :  exit status of wait  expected 0 got 0
fork08      3  TPASS  :  parent test PASSED
fork08      0  TINFO  :  Number of processes forked is 2
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fork09 stime=1429706579
cmdline="fork09"
contacts=""
analysis=exit
<<<test_output>>>
fork09      0  TINFO  :  OPEN_MAX is 1024
fork09      0  TINFO  :  first file descriptor is 7 
fork09      0  TINFO  :  Parent reporting 1023 files open
fork09      0  TINFO  :  Child opened new file #1023
fork09      0  TINFO  :  OPEN_MAX is 1024
fork09      0  TINFO  :  first file descriptor is 7 
fork09      0  TINFO  :  Parent reporting 1023 files open
fork09      1  TPASS  :  test 1 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fork10 stime=1429706579
cmdline="fork10"
contacts=""
analysis=exit
<<<test_output>>>
fork10      0  TINFO  :  fork child A
fork10      1  TPASS  :  test 1 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fork11 stime=1429706579
cmdline="fork11"
contacts=""
analysis=exit
<<<test_output>>>
fork11      1  TPASS  :  fork test passed, 100 processes
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fork13 stime=1429706579
cmdline="fork13 -i 1000000"
contacts=""
analysis=exit
<<<test_output>>>
fork13      1  TPASS  :  1000000 pids forked, all passed
<<<execution_status>>>
initiation_status="ok"
duration=116 termination_type=exited termination_id=0 corefile=no
cutime=433 cstime=11984
<<<test_end>>>
<<<test_start>>>
tag=fork14 stime=1429706695
cmdline="fork14"
contacts=""
analysis=exit
<<<test_output>>>
fork14      1  TPASS  :  fork failed as expected.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=18
<<<test_end>>>
<<<test_start>>>
tag=fpathconf01 stime=1429706695
cmdline="fpathconf01"
contacts=""
analysis=exit
<<<test_output>>>
fpathconf01    1  TPASS  :  fpathconf(fd, _PC_MAX_CANON) returned 255
fpathconf01    2  TPASS  :  fpathconf(fd, _PC_MAX_INPUT) returned 255
fpathconf01    3  TPASS  :  fpathconf(fd, _PC_VDISABLE) returned 0
fpathconf01    4  TPASS  :  fpathconf(fd, _PC_LINK_MAX) returned 127
fpathconf01    5  TPASS  :  fpathconf(fd, _PC_NAME_MAX) returned 255
fpathconf01    6  TPASS  :  fpathconf(fd, _PC_PATH_MAX) returned 4096
fpathconf01    7  TPASS  :  fpathconf(fd, _PC_PIPE_BUF) returned 4096
fpathconf01    8  TPASS  :  fpathconf(fd, _PC_CHOWN_RESTRICTED) returned 1
fpathconf01    9  TPASS  :  fpathconf(fd, _PC_NO_TRUNC) returned 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat01 stime=1429706695
cmdline="fstat01"
contacts=""
analysis=exit
<<<test_output>>>
fstat01     1  TPASS  :  fstat returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fstat01_64 stime=1429706695
cmdline="fstat01_64"
contacts=""
analysis=exit
<<<test_output>>>
fstat01     1  TPASS  :  fstat returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat02 stime=1429706695
cmdline="fstat02"
contacts=""
analysis=exit
<<<test_output>>>
fstat02     1  TPASS  :  functionality of fstat correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat02_64 stime=1429706695
cmdline="fstat02_64"
contacts=""
analysis=exit
<<<test_output>>>
fstat02     1  TPASS  :  functionality of fstat correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat03 stime=1429706695
cmdline="fstat03"
contacts=""
analysis=exit
<<<test_output>>>
fstat03     1  TPASS  :  fstat() fails with expected error EBADF
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fstat03_64 stime=1429706695
cmdline="fstat03_64"
contacts=""
analysis=exit
<<<test_output>>>
fstat03     1  TPASS  :  fstat() fails with expected error EBADF
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat04 stime=1429706695
cmdline="fstat04"
contacts=""
analysis=exit
<<<test_output>>>
fstat04     1  TPASS  :  fstat functionality correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat04_64 stime=1429706695
cmdline="fstat04_64"
contacts=""
analysis=exit
<<<test_output>>>
fstat04     1  TPASS  :  fstat functionality correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat05 stime=1429706695
cmdline="fstat05"
contacts=""
analysis=exit
<<<test_output>>>
fstat05     1  TPASS  :  fstat failed with EFAULT as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstat05_64 stime=1429706695
cmdline="fstat05_64"
contacts=""
analysis=exit
<<<test_output>>>
fstat05     1  TPASS  :  fstat failed with EFAULT as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstatat01 stime=1429706695
cmdline="fstatat01"
contacts=""
analysis=exit
<<<test_output>>>
fstatat01    1  TCONF  :  fstatat01.c:96: syscall __NR_fstatat64 not supported on your arch
fstatat01    2  TCONF  :  fstatat01.c:96: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fstatat01_64 stime=1429706695
cmdline="fstatat01_64"
contacts=""
analysis=exit
<<<test_output>>>
fstatat01    1  TCONF  :  fstatat01.c:96: syscall __NR_fstatat64 not supported on your arch
fstatat01    2  TCONF  :  fstatat01.c:96: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstatfs01 stime=1429706695
cmdline="fstatfs01"
contacts=""
analysis=exit
<<<test_output>>>
fstatfs01    1  TPASS  :  fstatfs() on a file - f_type=1021994
fstatfs01    2  TPASS  :  fstatfs() on a pipe - f_type=50495045
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstatfs01_64 stime=1429706695
cmdline="fstatfs01_64"
contacts=""
analysis=exit
<<<test_output>>>
fstatfs01    1  TPASS  :  fstatfs() on a file - f_type=1021994
fstatfs01    2  TPASS  :  fstatfs() on a pipe - f_type=50495045
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstatfs02 stime=1429706695
cmdline="fstatfs02"
contacts=""
analysis=exit
<<<test_output>>>
fstatfs02    1  TPASS  :  expected failure - errno = 9 : Bad file descriptor
fstatfs02    2  TPASS  :  expected failure - errno = 14 : Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fstatfs02_64 stime=1429706695
cmdline="fstatfs02_64"
contacts=""
analysis=exit
<<<test_output>>>
fstatfs02    1  TPASS  :  expected failure - errno = 9 : Bad file descriptor
fstatfs02    2  TPASS  :  expected failure - errno = 14 : Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fsync01 stime=1429706695
cmdline="fsync01"
contacts=""
analysis=exit
<<<test_output>>>
fsync01     1  TPASS  :  fsync returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fsync02 stime=1429706695
cmdline="fsync02"
contacts=""
analysis=exit
<<<test_output>>>
fsync02     1  TPASS  :  fsync succeeded in an acceptable amount of time
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fsync03 stime=1429706696
cmdline="fsync03"
contacts=""
analysis=exit
<<<test_output>>>
fsync03     1  TPASS  :  expected failure - errno = 9 : Bad file descriptor
fsync03     2  TPASS  :  expected failure - errno = 22 : Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate01 stime=1429706696
cmdline="ftruncate01"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate01    1  TPASS  :  Functionality of ftruncate() on testfile successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate01_64 stime=1429706696
cmdline="ftruncate01_64"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate01_64    1  TPASS  :  Functionality of ftruncate() on testfile successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate02 stime=1429706696
cmdline="ftruncate02"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate02    1  TPASS  :  Functionality of ftruncate(2) on testfile successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate02_64 stime=1429706696
cmdline="ftruncate02_64"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate02_64    1  TPASS  :  Functionality of ftruncate(2) on testfile successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate03 stime=1429706696
cmdline="ftruncate03"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate03    1  TPASS  :  Test Passed
ftruncate03    2  TPASS  :  Test Passed
ftruncate03    3  TPASS  :  Test Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate03_64 stime=1429706696
cmdline="ftruncate03_64"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate03_64    1  TPASS  :  Test Passed
ftruncate03_64    2  TPASS  :  Test Passed
ftruncate03_64    3  TPASS  :  Test Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ftruncate04 stime=1429706696
cmdline="ftruncate04.sh"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate04    1  TCONF  :  ltpapicmd.c:190: backend mountpoint for /tmp/ltp-IiL6bmTun7 does not correspond to a real device:
Filesystem     1024-blocks  Used Available Capacity Mounted on
tmp                1022924  1512   1021412       1% /tmp
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=ftruncate04_64 stime=1429706696
cmdline="ftruncate04.sh 64"
contacts=""
analysis=exit
<<<test_output>>>
ftruncate04_64    1  TCONF  :  ltpapicmd.c:190: backend mountpoint for /tmp/ltp-IiL6bmTun7 does not correspond to a real device:
Filesystem     1024-blocks  Used Available Capacity Mounted on
tmp                1022924  1512   1021412       1% /tmp
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=futimesat01 stime=1429706696
cmdline="futimesat01"
contacts=""
analysis=exit
<<<test_output>>>
futimesat01    1  TPASS  :  futimesat() returned the expected  errno 0: Success
futimesat01    2  TPASS  :  futimesat() returned the expected  errno 0: Success
futimesat01    3  TPASS  :  futimesat() returned the expected  errno 20: Not a directory
futimesat01    4  TPASS  :  futimesat() returned the expected  errno 9: Bad file descriptor
futimesat01    5  TPASS  :  futimesat() returned the expected  errno 0: Success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcontext01 stime=1429706696
cmdline="getcontext01"
contacts=""
analysis=exit
<<<test_output>>>
getcontext01    1  TPASS  :  getcontext passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcpu01 stime=1429706696
cmdline="getcpu01"
contacts=""
analysis=exit
<<<test_output>>>
getcpu01    1  TPASS  :  getcpu() returned proper cpuid:3, node id:0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcwd01 stime=1429706696
cmdline="getcwd01"
contacts=""
analysis=exit
<<<test_output>>>
getcwd01    0  TINFO  :  Test for EFAULT
getcwd01    1  TPASS  :  Test case 1 PASSED
getcwd01    0  TINFO  :  Test for ENOMEM
getcwd01    2  TPASS  :  Test case 2 PASSED
getcwd01    0  TINFO  :  Test for EINVAL
getcwd01    3  TPASS  :  Test case 3 PASSED
getcwd01    0  TINFO  :  Test for ERANGE
getcwd01    4  TPASS  :  Test case 4 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getcwd02 stime=1429706696
cmdline="getcwd02"
contacts=""
analysis=exit
<<<test_output>>>
getcwd02    0  TINFO  :  Enter Block 1
getcwd02    0  TINFO  :  Exit Block 1
getcwd02    1  TPASS  :  Block 1 PASSED
getcwd02    0  TINFO  :  Enter Block 2
getcwd02    0  TINFO  :  Exit Block 2
getcwd02    2  TPASS  :  Block 2 PASSED
getcwd02    0  TINFO  :  Enter Block 3
getcwd02    0  TINFO  :  Exit Block 3
getcwd02    3  TPASS  :  Block 3 PASSED
getcwd02    0  TINFO  :  Enter Block 4
getcwd02    0  TINFO  :  Exit Block 4
getcwd02    4  TPASS  :  Block 4 PASSED
getcwd02    0  TINFO  :  Enter Block 5
getcwd02    0  TINFO  :  Exit Block 5
getcwd02    5  TPASS  :  Block 5 PASSED
getcwd02    0  TINFO  :  Enter Block 6
getcwd02    0  TINFO  :  Exit Block 6
getcwd02    6  TPASS  :  Block 6 PASSED
getcwd02    0  TINFO  :  Enter Block 7
getcwd02    0  TINFO  :  Exit Block 7
getcwd02    7  TPASS  :  Block 7 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcwd03 stime=1429706696
cmdline="getcwd03"
contacts=""
analysis=exit
<<<test_output>>>
getcwd03    0  TINFO  :  getcwd(2) succeeded in returning correct path for dir1
getcwd03    0  TINFO  :  getcwd(2) succeeded in returning correct path for symbolic link dir2 -> dir1
getcwd03    1  TPASS  :  Test PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcwd04 stime=1429706696
cmdline="getcwd04"
contacts=""
analysis=exit
<<<test_output>>>
getcwd04    1  TPASS  :  Bug is not reproduced!
<<<execution_status>>>
initiation_status="ok"
duration=5 termination_type=exited termination_id=0 corefile=no
cutime=161 cstime=837
<<<test_end>>>
<<<test_start>>>
tag=getdents01 stime=1429706701
cmdline="getdents01"
contacts=""
analysis=exit
<<<test_output>>>
getdents01    0  TINFO  :  Found '.'
getdents01    0  TINFO  :  Found '..'
getdents01    0  TINFO  :  Found 'symlink'
getdents01    0  TINFO  :  Found 'file'
getdents01    0  TINFO  :  Found 'dir'
getdents01    1  TPASS  :  All entires found
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdents02 stime=1429706701
cmdline="getdents02"
contacts=""
analysis=exit
<<<test_output>>>
getdents02    1  TPASS  :  getdents failed as expected: Bad file descriptor
getdents02    2  TPASS  :  getdents failed as expected: Invalid argument
getdents02    3  TPASS  :  getdents failed as expected: Not a directory
getdents02    4  TPASS  :  getdents failed as expected: No such file or directory
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getdents01_64 stime=1429706701
cmdline="getdents01 -l"
contacts=""
analysis=exit
<<<test_output>>>
getdents01    0  TINFO  :  Found '.'
getdents01    0  TINFO  :  Found '..'
getdents01    0  TINFO  :  Found 'symlink'
getdents01    0  TINFO  :  Found 'file'
getdents01    0  TINFO  :  Found 'dir'
getdents01    1  TPASS  :  All entires found
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdents02_64 stime=1429706701
cmdline="getdents02 -l"
contacts=""
analysis=exit
<<<test_output>>>
getdents02    1  TPASS  :  getdents failed as expected: Bad file descriptor
getdents02    2  TPASS  :  getdents failed as expected: Invalid argument
getdents02    3  TPASS  :  getdents failed as expected: Not a directory
getdents02    4  TPASS  :  getdents failed as expected: No such file or directory
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdomainname01 stime=1429706701
cmdline="getdomainname01"
contacts=""
analysis=exit
<<<test_output>>>
getdomainname01    1  TPASS  :  getdomainname() returned 0 
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdtablesize01 stime=1429706701
cmdline="getdtablesize01"
contacts=""
analysis=exit
<<<test_output>>>
getdtablesize01    0  TINFO  :  Maximum number of files a process can have opened is 1024
getdtablesize01    0  TINFO  :  Checking with the value returned by getrlimit...RLIMIT_NOFILE
getdtablesize01    1  TPASS  :  got correct dtablesize, value is 1024
getdtablesize01    0  TINFO  :  Checking Max num of files that can be opened by a process.Should be: RLIMIT_NOFILE - 1
getdtablesize01    2  TPASS  :  1023 = 1023
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getegid01 stime=1429706701
cmdline="getegid01"
contacts=""
analysis=exit
<<<test_output>>>
getegid01    1  TPASS  :  getegid returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getegid01_16 stime=1429706701
cmdline="getegid01_16"
contacts=""
analysis=exit
<<<test_output>>>
getegid01_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getegid/../utils/compat_16.h:108: 16-bit version of getegid() is not supported on your platform
getegid01_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getegid/../utils/compat_16.h:108: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getegid02 stime=1429706701
cmdline="getegid02"
contacts=""
analysis=exit
<<<test_output>>>
getegid02    1  TPASS  :  effective group id 0 is correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getegid02_16 stime=1429706701
cmdline="getegid02_16"
contacts=""
analysis=exit
<<<test_output>>>
getegid02_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getegid/../utils/compat_16.h:108: 16-bit version of getegid() is not supported on your platform
getegid02_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getegid/../utils/compat_16.h:108: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=geteuid01 stime=1429706701
cmdline="geteuid01"
contacts=""
analysis=exit
<<<test_output>>>
geteuid01    1  TPASS  :  geteuid returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=geteuid01_16 stime=1429706701
cmdline="geteuid01_16"
contacts=""
analysis=exit
<<<test_output>>>
geteuid01_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/geteuid/../utils/compat_16.h:103: 16-bit version of geteuid() is not supported on your platform
geteuid01_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/geteuid/../utils/compat_16.h:103: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=geteuid02 stime=1429706701
cmdline="geteuid02"
contacts=""
analysis=exit
<<<test_output>>>
geteuid02    1  TPASS  :  values from geteuid and getpwuid match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=geteuid02_16 stime=1429706701
cmdline="geteuid02_16"
contacts=""
analysis=exit
<<<test_output>>>
geteuid02_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/geteuid/../utils/compat_16.h:103: 16-bit version of geteuid() is not supported on your platform
geteuid02_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/geteuid/../utils/compat_16.h:103: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgid01 stime=1429706701
cmdline="getgid01"
contacts=""
analysis=exit
<<<test_output>>>
getgid01    1  TPASS  :  getgid returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgid01_16 stime=1429706701
cmdline="getgid01_16"
contacts=""
analysis=exit
<<<test_output>>>
getgid01_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgid/../utils/compat_16.h:98: 16-bit version of getgid() is not supported on your platform
getgid01_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgid/../utils/compat_16.h:98: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgid03 stime=1429706701
cmdline="getgid03"
contacts=""
analysis=exit
<<<test_output>>>
getgid03    1  TPASS  :  values from getuid and getpwuid match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgid03_16 stime=1429706701
cmdline="getgid03_16"
contacts=""
analysis=exit
<<<test_output>>>
getgid03_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgid/../utils/compat_16.h:98: 16-bit version of getgid() is not supported on your platform
getgid03_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgid/../utils/compat_16.h:98: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgroups01 stime=1429706701
cmdline="getgroups01"
contacts=""
analysis=exit
<<<test_output>>>
getgroups01    1  TPASS  :  getgroups failed as expected with EINVAL
getgroups01    2  TPASS  :  getgroups did not modify the gidset array
getgroups01    3  TPASS  :  getgroups failed as expected with EINVAL
getgroups01    4  TPASS  :  getgroups(NGROUPS,gidset) returned 2 contains gid 0 (from getgid)
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgroups01_16 stime=1429706701
cmdline="getgroups01_16"
contacts=""
analysis=exit
<<<test_output>>>
getgroups01_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgroups/../utils/compat_16.h:78: 16-bit version of getgroups() is not supported on your platform
getgroups01_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgroups/../utils/compat_16.h:78: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgroups03 stime=1429706701
cmdline="getgroups03"
contacts=""
analysis=exit
<<<test_output>>>
getgroups03    1  TPASS  :  getgroups functionality correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgroups03_16 stime=1429706701
cmdline="getgroups03_16"
contacts=""
analysis=exit
<<<test_output>>>
getgroups03_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgroups/../utils/compat_16.h:73: 16-bit version of setgroups() is not supported on your platform
getgroups03_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getgroups/../utils/compat_16.h:73: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gethostid01 stime=1429706701
cmdline="gethostid01"
contacts=""
analysis=exit
<<<test_output>>>
gethostid01    1  TPASS  :  Hostid command and gethostid both report hostid is 007f0100
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gethostname01 stime=1429706701
cmdline="gethostname01"
contacts=""
analysis=exit
<<<test_output>>>
gethostname01    1  TPASS  :  gethostname returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getitimer01 stime=1429706701
cmdline="getitimer01"
contacts=""
analysis=exit
<<<test_output>>>
getitimer01    1  TPASS  :  functionality is ok
getitimer01    2  TPASS  :  functionality is ok
getitimer01    3  TPASS  :  functionality is ok
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getitimer02 stime=1429706701
cmdline="getitimer02"
contacts=""
analysis=exit
<<<test_output>>>
getitimer02    1  TPASS  :  expected failure - errno = 14 - Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getitimer03 stime=1429706701
cmdline="getitimer03"
contacts=""
analysis=exit
<<<test_output>>>
getitimer03    1  TPASS  :  expected failure - errno = 22 - Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getpagesize01 stime=1429706701
cmdline="getpagesize01"
contacts=""
analysis=exit
<<<test_output>>>
getpagesize01    0  TINFO  :  Page Size is 4096
getpagesize01    1  TPASS  :  getpagesize - Page size returned 4096
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpeername01 stime=1429706701
cmdline="getpeername01"
[  265.503685] serial8250: too much work for irq4
contacts=""
analysis=exit
<<<test_output>>>
getpeername01    1  TPASS  :  test getpeername() EBADF successful
getpeername01    2  TPASS  :  test getpeername() ENOTSOCK successful
getpeername01    3  TPASS  :  test getpeername() ENOTCONN successful
getpeername01    4  TPASS  :  test getpeername() EINVAL successful
getpeername01    5  TPASS  :  test getpeername() EFAULT successful
getpeername01    6  TPASS  :  test getpeername() EFAULT successful
getpeername01    7  TPASS  :  test getpeername() EFAULT successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpgid01 stime=1429706701
cmdline="getpgid01"
contacts=""
analysis=exit
<<<test_output>>>
getpgid01    0  TINFO  :  Enter block 1
getpgid01    1  TPASS  :  Test block 1: getpgid(0) PASSED
getpgid01    0  TINFO  :  Exit block 1
getpgid01    0  TINFO  :  Enter block 2
getpgid01    2  TPASS  :  Test block 2: getpgid(getpid()) PASSED
getpgid01    0  TINFO  :  Exit block 2
getpgid01    0  TINFO  :  Enter block 3
getpgid01    3  TPASS  :  Test block 3: getpgid(getppid()) PASSED
getpgid01    0  TINFO  :  Exit block 3
getpgid01    0  TINFO  :  Enter block 4
getpgid01    4  TPASS  :  Test block 4: getpgid(1) PASSED
getpgid01    0  TINFO  :  Exit block 4
getpgid01    0  TINFO  :  Enter block 5
getpgid01    5  TPASS  :  Test block 5: getpgid(1) PASSED
getpgid01    0  TINFO  :  Exit block 5
getpgid01    0  TINFO  :  getpgid01 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpgid02 stime=1429706701
cmdline="getpgid02"
contacts=""
analysis=exit
<<<test_output>>>
getpgid02    1  TPASS  :  expected failure - errno = 3 : No such process
getpgid02    2  TPASS  :  expected failure - errno = 3 : No such process
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpgrp01 stime=1429706701
cmdline="getpgrp01"
contacts=""
analysis=exit
<<<test_output>>>
getpgrp01    1  TPASS  :  getpgrp returned 10577
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpid01 stime=1429706701
cmdline="getpid01"
contacts=""
analysis=exit
<<<test_output>>>
getpid01    1  TPASS  :  getpid returned 10578
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpid02 stime=1429706701
cmdline="getpid02"
contacts=""
analysis=exit
<<<test_output>>>
getpid02    1  TPASS  :  getpid functionality is correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getppid01 stime=1429706701
cmdline="getppid01"
contacts=""
analysis=exit
<<<test_output>>>
getppid01    1  TPASS  :  getppid returned 510
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getppid02 stime=1429706701
cmdline="getppid02"
contacts=""
analysis=exit
<<<test_output>>>
return value and parent's pid value match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpriority01 stime=1429706701
cmdline="getpriority01"
contacts=""
analysis=exit
<<<test_output>>>
getpriority01    1  TPASS  :  getpriority(0, 0) returned 0 priority value
getpriority01    2  TPASS  :  getpriority(1, 0) returned 0 priority value
getpriority01    3  TPASS  :  getpriority(2, 0) returned -20 priority value
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpriority02 stime=1429706701
cmdline="getpriority02"
contacts=""
analysis=exit
<<<test_output>>>
getpriority02    1  TPASS  :  getpriority(2) fails, Invalid 'which' value specified, errno:22
getpriority02    2  TPASS  :  getpriority(2) fails, Invalid 'who' value specified, errno:3
getpriority02    3  TPASS  :  getpriority(2) fails, Invalid 'who' value specified, errno:3
getpriority02    4  TPASS  :  getpriority(2) fails, Invalid 'who' value specified, errno:3
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getresgid01 stime=1429706701
cmdline="getresgid01"
contacts=""
analysis=exit
<<<test_output>>>
getresgid01    1  TPASS  :  Functionality of getresgid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getresgid02 stime=1429706701
cmdline="getresgid02"
contacts=""
analysis=exit
<<<test_output>>>
getresgid02    1  TPASS  :  Functionality of getresgid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getresgid03 stime=1429706701
cmdline="getresgid03"
contacts=""
analysis=exit
<<<test_output>>>
getresgid03    1  TPASS  :  Functionality of getresgid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getresuid01 stime=1429706701
cmdline="getresuid01"
contacts=""
analysis=exit
<<<test_output>>>
getresuid01    1  TPASS  :  Functionality of getresuid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getresuid02 stime=1429706701
cmdline="getresuid02"
contacts=""
analysis=exit
<<<test_output>>>
getresuid02    1  TPASS  :  Functionality of getresuid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getresuid03 stime=1429706701
cmdline="getresuid03"
contacts=""
analysis=exit
<<<test_output>>>
getresuid03    1  TPASS  :  Functionality of getresuid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getrlimit01 stime=1429706701
cmdline="getrlimit01"
contacts=""
analysis=exit
<<<test_output>>>
getrlimit01    1  TPASS  :  getrlimit() test RLIMIT_CPU success
getrlimit01    2  TPASS  :  getrlimit() test RLIMIT_FSIZE success
getrlimit01    3  TPASS  :  getrlimit() test RLIMIT_DATA success
getrlimit01    4  TPASS  :  getrlimit() test RLIMIT_STACK success
getrlimit01    5  TPASS  :  getrlimit() test RLIMIT_CORE success
getrlimit01    6  TPASS  :  getrlimit() test RLIMIT_RSS success
getrlimit01    7  TPASS  :  getrlimit() test RLIMIT_NPROC success
getrlimit01    8  TPASS  :  getrlimit() test RLIMIT_NOFILE success
getrlimit01    9  TPASS  :  getrlimit() test RLIMIT_MEMLOCK success
getrlimit01   10  TPASS  :  getrlimit() test RLIMIT_AS success
getrlimit01   11  TPASS  :  getrlimit() test RLIMIT_LOCKS success
getrlimit01   12  TPASS  :  getrlimit() test RLIMIT_MSGQUEUE success
getrlimit01   13  TPASS  :  getrlimit() test RLIMIT_NICE success
getrlimit01   14  TPASS  :  getrlimit() test RLIMIT_RTPRIO success
getrlimit01   15  TPASS  :  getrlimit() test RLIMIT_SIGPENDING success
getrlimit01   16  TPASS  :  getrlimit() test RLIMIT_RTTIME success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start
[  265.545188] serial8250: too much work for irq4
>>>
tag=getrlimit02 stime=1429706701
cmdline="getrlimit02"
contacts=""
analysis=exit
<<<test_output>>>
getrlimit02    1  TPASS  :  expected failure; got EFAULT
getrlimit02    2  TPASS  :  expected failure; got EINVAL
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=get_mempolicy01 stime=1429706701
cmdline="get_mempolicy01"
contacts=""
analysis=exit
<<<test_output>>>
get_mempolicy01    1  TCONF  :  get_mempolicy01.c:351: System doesn't have required numa support
get_mempolicy01    2  TCONF  :  get_mempolicy01.c:351: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=get_robust_list01 stime=1429706701
cmdline="get_robust_list01"
contacts=""
analysis=exit
<<<test_output>>>
get_robust_list01    1  TPASS  :  get_robust_list failed as expected with EFAULT
get_robust_list01    2  TPASS  :  get_robust_list failed as expected with EFAULT
get_robust_list01    3  TPASS  :  get_robust_list failed as expected with ESRCH
get_robust_list01    4  TPASS  :  get_robust_list succeeded
get_robust_list01    5  TPASS  :  get_robust_list failed as expected with EPERM
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getrusage01 stime=1429706701
cmdline="getrusage01"
contacts=""
analysis=exit
<<<test_output>>>
getrusage01    1  TPASS  :  getrusage passed
getrusage01    2  TPASS  :  getrusage passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getrusage02 stime=1429706701
cmdline="getrusage02"
contacts=""
analysis=exit
<<<test_output>>>
getrusage02    1  TPASS  :  getrusage failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
getrusage02    2  TPASS  :  getrusage failed as expected: TEST_ERRNO=EFAULT(14): Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getrusage03 stime=1429706701
cmdline="getrusage03"
contacts=""
analysis=exit
<<<test_output>>>
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103832
getrusage03    0  TINFO  :  child.self = 102532
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103832
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103676
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    0  TINFO  :  child.children = 0
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103832
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103676
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    3  TPASS  :  child.children == 0
getrusage03    0  TINFO  :  Testcase #03: fork + malloc
getrusage03    0  TINFO  :  initial.self = 104064
getrusage03    0  TINFO  :  child allocate +50MB
getrusage03    0  TINFO  :  child.self = 154396
getrusage03_child    0  TINFO  :  grandchild allocate 300MB
getrusage03_child    0  TINFO  :  grandchild allocate 300MB
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103832
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103676
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    3  TPASS  :  child.children == 0
getrusage03    0  TINFO  :  Testcase #03: fork + malloc
getrusage03    0  TINFO  :  initial.self = 104064
getrusage03    4  TPASS  :  initial.self + 50MB ~= child.self
getrusage03    0  TINFO  :  Testcase #04: grandchild maxrss
getrusage03    0  TINFO  :  initial.children = 154880
getrusage03_child    0  TINFO  :  child allocate 400MB
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103832
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103676
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    3  TPASS  :  child.children == 0
getrusage03    0  TINFO  :  Testcase #03: fork + malloc
getrusage03    0  TINFO  :  initial.self = 104064
getrusage03    4  TPASS  :  initial.self + 50MB ~= child.self
getrusage03    0  TINFO  :  Testcase #04: grandchild maxrss
getrusage03    0  TINFO  :  initial.children = 154880
getrusage03    0  TINFO  :  post_wait.children = 308204
getrusage03    5  TPASS  :  child.children ~= 300MB
getrusage03    0  TINFO  :  Testcase #05: zombie
getrusage03    0  TINFO  :  initial.children = 308204
getrusage03_child    0  TINFO  :  child allocate 500MB
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103832
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103676
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    3  TPASS  :  child.children == 0
getrusage03    0  TINFO  :  Testcase #03: fork + malloc
getrusage03    0  TINFO  :  initial.self = 104064
getrusage03    4  TPASS  :  initial.self + 50MB ~= child.self
getrusage03    0  TINFO  :  Testcase #04: grandchild maxrss
getrusage03    0  TINFO  :  initial.children = 154880
getrusage03    0  TINFO  :  post_wait.children = 308204
getrusage03    5  TPASS  :  child.children ~= 300MB
getrusage03    0  TINFO  :  Testcase #05: zombie
getrusage03    0  TINFO  :  initial.children = 308204
getrusage03    0  TINFO  :  pre_wait.children = 308204
getrusage03    6  TPASS  :  initial.children ~= pre_wait.children
getrusage03    0  TINFO  :  post_wait.children = 411256
getrusage03    7  TPASS  :  post_wait.children ~= 400MB
getrusage03    0  TINFO  :  Testcase #06: SIG_IGN
getrusage03    0  TINFO  :  initial.children = 411256
getrusage03_child    0  TINFO  :  exec.self = 104084, exec.children = 411256
getrusage03_child    1  TPASS  :  initial.self ~= exec.self
getrusage03_child    2  TPASS  :  initial.children ~= exec.children
<<<execution_status>>>
initiation_status="ok"
duration=3 termination_type=exited termination_id=0 corefile=no
cutime=12 cstime=140
<<<test_end>>>
<<<test_start>>>
tag=getrusage04 stime=1429706704
cmdline="getrusage04"
contacts=""
analysis=exit
<<<test_output>>>
getrusage04    0  TINFO  :  Expected timers granularity is 1000 us
getrusage04    0  TINFO  :  Using 1 as multiply factor for max [us]time increment (1000+1000us)!
getrusage04    0  TINFO  :  utime:         625us; stime:           0us
getrusage04    0  TINFO  :  utime:         811us; stime:         811us
getrusage04    0  TINFO  :  utime:         875us; stime:        1751us
getrusage04    0  TINFO  :  utime:         904us; stime:        2713us
getrusage04    0  TINFO  :  utime:         923us; stime:        3693us
getrusage04    0  TINFO  :  utime:        1874us; stime:        3749us
getrusage04    0  TINFO  :  utime:        1887us; stime:        4717us
getrusage04    0  TINFO  :  utime:        1901us; stime:        5703us
getrusage04    0  TINFO  :  utime:        1913us; stime:        6696us
getrusage04    0  TINFO  :  utime:        1918us; stime:        7675us
getrusage04    0  TINFO  :  utime:        1925us; stime:        8666us
getrusage04    0  TINFO  :  utime:        1932us; stime:        9660us
getrusage04    0  TINFO  :  utime:        1932us; stime:        9663us
getrusage04    0  TINFO  :  utime:        1935us; stime:       10645us
getrusage04    0  TINFO  :  utime:        1940us; stime:       11641us
getrusage04    0  TINFO  :  utime:        1944us; stime:       12642us
getrusage04    0  TINFO  :  utime:        2919us; stime:       12650us
getrusage04    0  TINFO  :  utime:        2923us; stime:       13645us
getrusage04    0  TINFO  :  utime:        2928us; stime:       14644us
getrusage04    0  TINFO  :  utime:        2930us; stime:       15629us
getrusage04    0  TINFO  :  utime:        2933us; stime:       16625us
getrusage04    1  TPASS  :  Test Passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=3
<<<test_end>>>
<<<test_start>>>
tag=getsid01 stime=1429706704
cmdline="getsid01"
contacts=""
analysis=exit
<<<test_output>>>
getsid01    1  TPASS  :  session ID is correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getsid02 stime=1429706704
cmdline="getsid02"
contacts=""
analysis=exit
<<<test_output>>>
getsid02    1  TPASS  :  expected failure - errno = 3 - No such process
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getsockname01 stime=1429706704
cmdline="getsockname01"
contacts=""
analysis=exit
<<<test_output>>>
getsockname01    1  TPASS  :  bad file descriptor successful
getsockname01    2  TPASS  :  bad file descriptor successful
getsockname01    3  TPASS  :  invalid socket buffer successful
getsockname01    4  TPASS  :  invalid aligned salen successful
getsockname01    5  TPASS  :  invalid unaligned salen successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getsockopt01 stime=1429706704
cmdline="getsockopt01"
contacts=""
analysis=exit
<<<test_output>>>
getsockopt01    1  TPASS  :  bad file descriptor successful
getsockopt01    2  TPASS  :  bad file descriptor successful
getsockopt01    3  TPASS  :  invalid option buffer successful
getsockopt01    4  TPASS  :  invalid optlen successful
getsockopt01    5  TPASS  :  invalid level successful
getsockopt01    6  TPASS  :  invalid option name successful
getsockopt01    7  TPASS  :  invalid option name (UDP) successful
getsockopt01    8  TPASS  :  invalid option name (IP) successful
getsockopt01    9  TPASS  :  invalid option name (TCP) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=gettid01 stime=1429706704
cmdline="gettid01"
contacts=""
analysis=exit
<<<test_output>>>
gettid01    1  TPASS  :  gettid() returned 10617
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gettimeofday01 stime=1429706704
cmdline="gettimeofday01"
contacts=""
analysis=exit
<<<test_output>>>
gettimeofday01    1  TPASS  :  gettimeofday(2) set the errno EFAULT correctly
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gettimeofday02 stime=1429706704
cmdline="gettimeofday02"
contacts=""
analysis=exit
<<<test_output>>>
gettimeofday02    0  TINFO  :  checking if gettimeofday is monotonous, takes 30s
gettimeofday02    1  TPASS  :  gettimeofday monotonous in 30 seconds
<<<execution_status>>>
initiation_status="ok"
duration=30 termination_type=exited termination_id=0 corefile=no
cutime=552 cstime=2447
<<<test_end>>>
<<<test_start>>>
tag=getuid01 stime=1429706734
cmdline="getuid01"
contacts=""
analysis=exit
<<<test_output>>>
getuid01    1  TPASS  :  getuid returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getuid01_16 stime=1429706734
cmdline="getuid01_16"
contacts=""
analysis=exit
<<<test_output>>>
getuid01_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getuid/../utils/compat_16.h:88: 16-bit version of getuid() is not supported on your platform
getuid01_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getuid/../utils/compat_16.h:88: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getuid03 stime=1429706734
cmdline="getuid03"
contacts=""
analysis=exit
<<<test_output>>>
getuid03    1  TPASS  :  values from getuid and getpwuid match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getuid03_16 stime=1429706734
cmdline="getuid03_16"
contacts=""
analysis=exit
<<<test_output>>>
getuid03_16    1  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getuid/../utils/compat_16.h:88: 16-bit version of getuid() is not supported on your platform
getuid03_16    2  TCONF  :  /tmp/ltp/testcases/kernel/syscalls/getuid/../utils/compat_16.h:88: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getxattr01 stime=1429706734
cmdline="getxattr01"
contacts=""
analysis=exit
<<<test_output>>>
getxattr01    1  TCONF  :  getxattr01.c:182: <attr/xattr.h> does not exist.
getxattr01    2  TCONF  :  getxattr01.c:182: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getxattr02 stime=1429706734
cmdline="getxattr02"
contacts=""
analysis=exit
<<<test_output>>>
getxattr02    1  TCONF  :  getxattr02.c:169: <attr/xattr.h> does not exist.
getxattr02    2  TCONF  :  getxattr02.c:169: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getxattr03 stime=1429706734
cmdline="getxattr03"
contacts=""
analysis=exit
<<<test_output>>>
getxattr03    1  TCONF  :  getxattr03.c:121: <attr/xattr.h> does not exist.
getxattr03    2  TCONF  :  getxattr03.c:121: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ioctl01_02 stime=1429706734
cmdline="  test_ioctl"
contacts=""
analysis=exit
<<<test_output>>>
ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty0
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty0

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty1
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty1

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty10
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty10

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty11
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty11

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty12
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty12

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty13
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty13

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty14
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty14

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty15
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty15

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty16
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty16

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty17
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty17

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty18
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty18

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty19
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty19

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty2
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty2

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty20
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty20

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty21
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty21

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty22
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty22

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty23
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty23

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty24
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty24

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty25
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty25

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty26
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty26

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty27
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty27

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty28
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty28

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty29
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty29

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty3
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty3

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty30
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty30

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty31
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty31

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty32
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty32

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty33
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty33

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty34
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty34

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty35
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty35

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty36
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty36

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty37
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty37

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty38
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty38

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty39
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty39

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty4
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty4

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty40
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty40

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty41
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty41

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty42
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty42

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty43
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty43

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty44
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty44

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty45
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty45

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty46
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty46

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty47
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty47

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty48
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty48

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty49
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty49

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty5
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty5

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty50
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty50

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty51
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty51

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty52
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty52

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty53
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty53

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty54
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty54

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty55
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty55

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty56
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty56

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty57
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty57

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty58
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty58

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty59
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty59

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty6
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty6

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty60
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty60

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty61
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty61

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty62
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty62

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty63
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty63

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty7
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty7

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty8
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty8

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty9
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty9

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty0
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty0

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty1
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty1

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty10
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty10

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty11
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty11

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty12
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty12

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty13
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty13

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty14
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty14

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty15
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty15

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty16
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty16

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty17
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty17

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty18
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty18

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty19
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty19

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty2
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty2

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty20
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty20

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty21
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty21

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty22
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty22

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty23
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty23

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty24
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty24

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty25
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty25

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty26
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty26

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty27
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty27

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty28
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty28

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty29
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty29

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty3
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty3

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty30
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty30

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty31
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty31

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty32
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty32

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty33
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty33

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty34
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty34

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty35
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty35

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty36
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty36

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty37
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty37

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty38
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty38

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty39
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty39

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty4
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty4

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty40
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty40

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty41
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty41

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty42
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty42

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty43
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty43

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty44
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty44

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty45
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty45

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty46
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty46

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty47
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty47

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty48
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty48

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty49
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty49

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty5
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty5

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty50
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty50

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty51
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty51

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty52
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty52

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty53
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty53

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty54
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty54

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty55
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty55

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty56
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty56

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty57
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty57

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty58
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty58

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty59
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty59

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty6
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty6

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty60
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty60

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty61
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty61

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty62
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty62

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty63
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty63

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty7
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty7

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty8
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty8

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty9
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty9

<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=7 cstime=43
<<<test_end>>>
<<<test_start>>>
tag=ioctl03 stime=1429706735
cmdline="     ioctl03"
contacts=""
analysis=exit
<<<test_output>>>
ioctl03     0  TINFO  :  Available features are: 0x7103
ioctl03     0  TINFO  :  TUN 0x1
ioctl
[  299.612921] tun: Universal TUN/TAP device driver, 1.6
03     0  TINFO  :  TAP 0x2
ioctl03     0  TINFO  :  NO_PI 0x1000
ioctl03     0  TINFO  :  ONE_QUEUE 0x2000
ioctl03     0  TINFO  :  VNET_HDR 0x4000
ioctl03     0  TINFO  :  MULTI_QUEUE 0x
[  299.612922] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
100
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify_init1_01 stime=1429706735
cmdline="inotify_init1_01"
contacts=""
analysis=exit
<<<test_output>>>
inotify_init1_01    1  TPASS  :  inotify_init1(O_CLOEXEC) PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify_init1_02 stime=1429706735
cmdline="inotify_init1_02"
contacts=""
analysis=exit
<<<test_output>>>
inotify_init1_02    1  TPASS  :  inotify_init1(IN_NONBLOCK) PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify01 stime=1429706735
cmdline="inotify01"
contacts=""
analysis=exit
<<<test_output>>>
inotify01    1  TPASS  :  get event: wd=1 mask=4 cookie=0 len=0
inotify01    2  TPASS  :  get event: wd=1 mask=20 cookie=0 len=0
inotify01    3  TPASS  :  get event: wd=1 mask=1 cookie=0 len=0
inotify01    4  TPASS  :  get event: wd=1 mask=10 cookie=0 len=0
inotify01    5  TPASS  :  get event: wd=1 mask=20 cookie=0 len=0
inotify01    6  TPASS  :  get event: wd=1 mask=2 cookie=0 len=0
inotify01    7  TPASS  :  get event: wd=1 mask=8 cookie=0 len=0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify02 stime=1429706735
cmdline="inotify02"
contacts=""
analysis=exit
<<<test_output>>>
inotify02    1  TPASS  :  get event: wd=1 mask=40000004 cookie=0 len=0 name=""
inotify02    2  TPASS  :  get event: wd=1 mask=100 cookie=0 len=16 name="test_file1"
inotify02    3  TPASS  :  get event: wd=1 mask=20 cookie=0 len=16 name="test_file1"
inotify02    4  TPASS  :  get event: wd=1 mask=8 cookie=0 len=16 name="test_file1"
inotify02    5  TPASS  :  get event: wd=1 mask=40 cookie=2524652 len=16 name="test_file1"
inotify02    6  TPASS  :  get event: wd=1 mask=80 cookie=2524652 len=16 name="test_file2"
inotify02    7  TPASS  :  get event: wd=1 mask=800 cookie=0 len=0 name=""
inotify02    8  TPASS  :  get event: wd=1 mask=200 cookie=0 len=16 name="test_file2"
inotify02    9  TPASS  :  get event: wd=1 mask=800 cookie=0 len=0 name=""
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=inotify03 stime=1429706735
cmdline="inotify03"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.42.12 (29-Aug-2014)
[  299.637602] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  299.637818] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
inotify03    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
inotify03    0  TINFO  :  Formatting /dev/loop0 with ext2 extra opts=''
inotify03    0  TINFO  :  mount /dev/loop0 to mntpoint fs_type=ext2
inotify03    0  TINFO  :  umount /dev/loop0
inotify03    1  TPASS  :  get event: wd=1 mask=2000 cookie=0 len=0
inotify03    2  TPASS  :  get event: wd=1 mask=8000 cookie=0 len=0
inotify03    3  TPASS  :  inotify_rm_watch (7, 1) returned EINVAL
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=inotify04 stime=1429706735
cmdline="inotify04"
contacts=""
analysis=exit
<<<test_output>>>
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify05 stime=1429706735
cmdline="inotify05"
contacts=""
analysis=exit
<<<test_output>>>
inotify05    1  TPASS  :  get event: wd=-1 mask=4000 cookie=0 len=0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=2
<<<test_end>>>
<<<test_start>>>
tag=fanotify01 stime=1429706735
cmdline="fanotify01"
contacts=""
analysis=exit
<<<test_output>>>
fanotify01    1  TPASS  :  get event: mask=31 pid=11237 fd=8
fanotify01    2  TPASS  :  get event: mask=11 pid=11237 fd=4294967294
fanotify01    3  TPASS  :  get event: mask=10 pid=11237 fd=4294967294
fanotify01    4  TPASS  :  get event: mask=2a pid=11237 fd=9
fanotify01    5  TPASS  :  get event: mask=a pid=11237 fd=4294967294
fanotify01    6  TPASS  :  get event: mask=8 pid=11237 fd=4294967294
fanotify01    7  TPASS  :  get event: mask=20 pid=11237 fd=11
fanotify01    8  TPASS  :  get event: mask=b pid=11237 fd=10
fanotify01    9  TPASS  :  get event: mask=9 pid=11237 fd=4294967294
fanotify01   10  TPASS  :  get event: mask=8 pid=11237 fd=4294967294
fanotify01   11  TPASS  :  get event: mask=2 pid=11237 fd=13
fanotify01   12  TPASS  :  get event: mask=8 pid=11237 fd=12
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fanotify02 stime=1429706735
cmdline="fanotify02"
contacts=""
analysis=exit
<<<test_output>>>
[ 4283.197601] i6300esb: Unexpected close, not stopping watchdog!
[ 4283.200494] systemd-journald[117]: Received SIGTERM from PID 624 (watchdog).
[ 4283.201894] systemd-journald[117]: systemd-journald stopped as pid 117
[ 4283.361091] systemd-default-display-manager-generator[12774]: No /etc/X11/default-display-manager file, nothing to generate
[ 4283.370838] systemd-gpt-auto-generator[12775]: Root file system not on a (single) block device.
[ 4283.380829] systemd-fstab-generator[12776]: Parsing /etc/fstab
[ 4283.390812] systemd-rc-local-generator[12777]: Automatically adding rc-local.service.
[ 4283.400844] systemd-sysv-generator[12778]: Looking for unit files in (higher priority first):
[ 4283.404245] systemd-sysv-generator[12778]: Looking for SysV init scripts in:
[ 4283.405268] systemd-sysv-generator[12778]: Looking for SysV rcN.d links in:
[ 4283.407219] systemd-sysv-generator[12778]: Ignoring S03mountdevsubfs.sh symlink in rcS.d, not generating mountdevsubfs.service.
[ 4283.408234] systemd-sysv-generator[12778]: Ignoring S10udev-finish symlink in rcS.d, not generating udev-finish.service.
[ 4283.409205] systemd-sysv-generator[12778]: Ignoring S16x11-common symlink in rcS.d, not generating x11-common.service.
[ 4283.410149] systemd-sysv-generator[12778]: Ignoring S10procps symlink in rcS.d, not generating procps.service.
[ 4283.411036] systemd-sysv-generator[12778]: Ignoring S14mountnfs.sh symlink in rcS.d, not generating mountnfs.service.
[ 4283.411962] systemd-sysv-generator[12778]: Ignoring S15mountnfs-bootclean.sh symlink in rcS.d, not generating mountnfs-bootclean.service.
[ 4283.413019] systemd-sysv-generator[12778]: Ignoring S07checkroot-bootclean.sh symlink in rcS.d, not generating checkroot-bootclean.service.
[ 4283.414111] systemd-sysv-generator[12778]: Ignoring S05checkroot.sh symlink in rcS.d, not generating checkroot.service.
[ 4283.414990] systemd-sysv-generator[12778]: Ignoring S04hwclock.sh symlink in rcS.d, not generating hwclock.service.
[ 4283.415879] systemd-sysv-generator[12778]: Ignoring S09mountall-bootclean.sh symlink in rcS.d, not generating mountall-bootclean.service.
[ 4283.416895] systemd-sysv-generator[12778]: Ignoring S10urandom symlink in rcS.d, not generating urandom.service.
[ 4283.417779] systemd-sysv-generator[12778]: Ignoring S07kmod symlink in rcS.d, not generating kmod.service.
[ 4283.418576] systemd-sysv-generator[12778]: Ignoring S16bootmisc.sh symlink in rcS.d, not generating bootmisc.service.
[ 4283.419449] systemd-sysv-generator[12778]: Ignoring S01mountkernfs.sh symlink in rcS.d, not generating mountkernfs.service.
[ 4283.420487] systemd-sysv-generator[12778]: Ignoring S01hostname.sh symlink in rcS.d, not generating hostname.service.
[ 4283.421377] systemd-sysv-generator[12778]: Ignoring S02udev symlink in rcS.d, not generating udev.service.
[ 4283.422180] systemd-sysv-generator[12778]: Ignoring S06checkfs.sh symlink in rcS.d, not generating checkfs.service.
[ 4283.423032] systemd-sysv-generator[12778]: Ignoring S08mountall.sh symlink in rcS.d, not generating mountall.service.
[ 4283.423959] systemd-sysv-generator[12778]: Ignoring K02ipmievd symlink in rc1.d, not generating ipmievd.service.
[ 4283.424851] systemd-sysv-generator[12778]: Ignoring S01bootlogs symlink in rc1.d, not generating bootlogs.service.
[ 4283.425760] systemd-sysv-generator[12778]: Ignoring S01killprocs symlink in rc1.d, not generating killprocs.service.
[ 4283.426648] systemd-sysv-generator[12778]: Ignoring S01motd symlink in rc1.d, not generating motd.service.
[ 4283.427489] systemd-sysv-generator[12778]: Ignoring K02mdadm symlink in rc1.d, not generating mdadm.service.
[ 4283.428331] systemd-sysv-generator[12778]: Ignoring S02single symlink in rc1.d, not generating single.service.
[ 4283.429186] systemd-sysv-generator[12778]: Ignoring K01watchdog symlink in rc1.d, not generating watchdog.service.
[ 4283.430062] systemd-sysv-generator[12778]: Ignoring S77lkp-bootstrap symlink in rc2.d, not generating lkp-bootstrap.service.
[ 4283.431073] systemd-sysv-generator[12778]: Ignoring S15wd_keepalive symlink in rc2.d, not generating wd_keepalive.service.
[ 4283.431997] systemd-sysv-generator[12778]: Ignoring S01bootlogs symlink in rc2.d, not generating bootlogs.service.
[ 4283.432838] systemd-sysv-generator[12778]: Ignoring S15ssh symlink in rc2.d, not generating ssh.service.
[ 4283.433620] systemd-sysv-generator[12778]: Ignoring S15dbus symlink in rc2.d, not generating dbus.service.
[ 4283.435831] systemd-sysv-generator[12778]: Ignoring S16watchdog symlink in rc2.d, not generating watchdog.service.
[ 4283.438067] systemd-sysv-generator[12778]: Ignoring S01motd symlink in rc2.d, not generating motd.service.
[ 4283.440241] systemd-sysv-generator[12778]: Ignoring S16rmnologin symlink in rc2.d, not generating rmnologin.service.
[ 4283.442475] systemd-sysv-generator[12778]: Ignoring S15cron symlink in rc2.d, not generating cron.service.
[ 4283.444581] systemd-sysv-generator[12778]: Ignoring S01mdadm symlink in rc2.d, not generating mdadm.service.
[ 4283.446650] systemd-sysv-generator[12778]: Ignoring S15ipmievd symlink in rc2.d, not generating ipmievd.service.
[ 4283.448769] systemd-sysv-generator[12778]: Ignoring S16rc.local symlink in rc2.d, not generating rc.local.service.
[ 4283.450948] systemd-sysv-generator[12778]: Ignoring S15wd_keepalive symlink in rc3.d, not generating wd_keepalive.service.
[ 4283.453281] systemd-sysv-generator[12778]: Ignoring S01bootlogs symlink in rc3.d, not generating bootlogs.service.
[ 4283.455527] systemd-sysv-generator[12778]: Ignoring S15ssh symlink in rc3.d, not generating ssh.service.
[ 4283.457705] systemd-sysv-generator[12778]: Ignoring S15dbus symlink in rc3.d, not generating dbus.service.
[ 4283.459810] systemd-sysv-generator[12778]: Ignoring S16watchdog symlink in rc3.d, not generating watchdog.service.
[ 4283.462087] systemd-sysv-generator[12778]: Ignoring S01motd symlink in rc3.d, not generating motd.service.
[ 4283.464422] systemd-sysv-generator[12778]: Ignoring S16rmnologin symlink in rc3.d, not generating rmnologin.service.
[ 4283.466785] systemd-sysv-generator[12778]: Ignoring S15cron symlink in rc3.d, not generating cron.service.
[ 4283.469014] systemd-sysv-generator[12778]: Ignoring S01mdadm symlink in rc3.d, not generating mdadm.service.
[ 4283.471208] systemd-sysv-generator[12778]: Ignoring S15ipmievd symlink in rc3.d, not generating ipmievd.service.
[ 4283.473403] systemd-sysv-generator[12778]: Ignoring S16rc.local symlink in rc3.d, not generating rc.local.service.
[ 4283.475685] systemd-sysv-generator[12778]: Ignoring S15wd_keepalive symlink in rc4.d, not generating wd_keepalive.service.
[ 4283.477960] systemd-sysv-generator[12778]: Ignoring S01bootlogs symlink in rc4.d, not generating bootlogs.service.
[ 4283.480308] systemd-sysv-generator[12778]: Ignoring S15ssh symlink in rc4.d, not generating ssh.service.
[ 4283.482430] systemd-sysv-generator[12778]: Ignoring S15dbus symlink in rc4.d, not generating dbus.service.
[ 4283.484525] systemd-sysv-generator[12778]: Ignoring S16watchdog symlink in rc4.d, not generating watchdog.service.
[ 4283.486554] systemd-sysv-generator[12778]: Ignoring S01motd symlink in rc4.d, not generating motd.service.
[ 4283.488617] systemd-sysv-generator[12778]: Ignoring S16rmnologin symlink in rc4.d, not generating rmnologin.service.
[ 4283.490741] systemd-sysv-generator[12778]: Ignoring S15cron symlink in rc4.d, not generating cron.service.
[ 4283.492906] systemd-sysv-generator[12778]: Ignoring S01mdadm symlink in rc4.d, not generating mdadm.service.
[ 4283.494954] systemd-sysv-generator[12778]: Ignoring S15ipmievd symlink in rc4.d, not generating ipmievd.service.
[ 4283.496975] systemd-sysv-generator[12778]: Ignoring S16rc.local symlink in rc4.d, not generating rc.local.service.
[ 4283.499018] systemd-sysv-generator[12778]: Ignoring S15wd_keepalive symlink in rc5.d, not generating wd_keepalive.service.
[ 4283.501198] systemd-sysv-generator[12778]: Ignoring S01bootlogs symlink in rc5.d, not generating bootlogs.service.
[ 4283.503279] systemd-sysv-generator[12778]: Ignoring S15ssh symlink in rc5.d, not generating ssh.service.
[ 4283.505366] systemd-sysv-generator[12778]: Ignoring S15dbus symlink in rc5.d, not generating dbus.service.
[ 4283.507440] systemd-sysv-generator[12778]: Ignoring S16watchdog symlink in rc5.d, not generating watchdog.service.
[ 4283.509570] systemd-sysv-generator[12778]: Ignoring S01motd symlink in rc5.d, not generating motd.service.
[ 4283.511651] systemd-sysv-generator[12778]: Ignoring S16rmnologin symlink in rc5.d, not generating rmnologin.service.
[ 4283.513813] systemd-sysv-generator[12778]: Ignoring S15cron symlink in rc5.d, not generating cron.service.
[ 4283.515802] systemd-sysv-generator[12778]: Ignoring S01mdadm symlink in rc5.d, not generating mdadm.service.
[ 4283.517831] systemd-sysv-generator[12778]: Ignoring S15ipmievd symlink in rc5.d, not generating ipmievd.service.
[ 4283.519906] systemd-sysv-generator[12778]: Ignoring S16rc.local symlink in rc5.d, not generating rc.local.service.
[ 4283.521982] systemd-sysv-generator[12778]: Ignoring K02ipmievd symlink in rc0.d, not generating ipmievd.service.
[ 4283.524046] systemd-sysv-generator[12778]: Ignoring K09umountroot symlink in rc0.d, not generating umountroot.service.
[ 4283.526214] systemd-sysv-generator[12778]: Ignoring K10mdadm-waitidle symlink in rc0.d, not generating mdadm-waitidle.service.
[ 4283.529674] systemd-sysv-generator[12778]: Ignoring K11halt symlink in rc0.d, not generating halt.service.
[ 4283.531725] systemd-sysv-generator[12778]: Ignoring K04sendsigs symlink in rc0.d, not generating sendsigs.service.
[ 4283.533797] systemd-sysv-generator[12778]: Ignoring K02mdadm symlink in rc0.d, not generating mdadm.service.
[ 4283.535888] systemd-sysv-generator[12778]: Ignoring K08umountfs symlink in rc0.d, not generating umountfs.service.
[ 4283.537989] systemd-sysv-generator[12778]: Ignoring K05umountnfs.sh symlink in rc0.d, not generating umountnfs.service.
[ 4283.540096] systemd-sysv-generator[12778]: Ignoring K02urandom symlink in rc0.d, not generating urandom.service.
[ 4283.542440] systemd-sysv-generator[12778]: Ignoring K07hwclock.sh symlink in rc0.d, not generating hwclock.service.
[ 4283.544618] systemd-sysv-generator[12778]: Ignoring K01watchdog symlink in rc0.d, not generating watchdog.service.
[ 4283.546659] systemd-sysv-generator[12778]: Ignoring K02ipmievd symlink in rc6.d, not generating ipmievd.service.
[ 4283.548764] systemd-sysv-generator[12778]: Ignoring K09umountroot symlink in rc6.d, not generating umountroot.service.
[ 4283.550853] systemd-sysv-generator[12778]: Ignoring K10mdadm-waitidle symlink in rc6.d, not generating mdadm-waitidle.service.
[ 4283.554260] systemd-sysv-generator[12778]: Ignoring K04sendsigs symlink in rc6.d, not generating sendsigs.service.
[ 4283.556475] systemd-sysv-generator[12778]: Ignoring K12reboot symlink in rc6.d, not generating reboot.service.
[ 4283.558575] systemd-sysv-generator[12778]: Ignoring K02mdadm symlink in rc6.d, not generating mdadm.service.
[ 4283.560726] systemd-sysv-generator[12778]: Ignoring K08umountfs symlink in rc6.d, not generating umountfs.service.
[ 4283.562851] systemd-sysv-generator[12778]: Ignoring K05umountnfs.sh symlink in rc6.d, not generating umountnfs.service.
[ 4283.565050] systemd-sysv-generator[12778]: Ignoring K02urandom symlink in rc6.d, not generating urandom.service.
[ 4283.567118] systemd-sysv-generator[12778]: Ignoring K07hwclock.sh symlink in rc6.d, not generating hwclock.service.
[ 4283.569363] systemd-sysv-generator[12778]: Ignoring K01watchdog symlink in rc6.d, not generating watchdog.service.

BUG: kernel test hang
Elapsed time: 4315
qemu-system-x86_64 -enable-kvm -cpu Penryn -kernel /kernel/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/vmlinuz-3.19.0-00467-g66ba93c0 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-2G-1/bisect_ltp-syscalls-debian-x86_64-2015-02-07.cgz-x86_64-rhel-66ba93c0d7fe63def447ad0afe380307ff9ebcad-1-20150422-19534-1t04tlf.yaml ARCH=x86_64 kconfig=x86_64-rhel branch=linus/master commit=66ba93c0d7fe63def447ad0afe380307ff9ebcad BOOT_IMAGE=/kernel/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/vmlinuz-3.19.0-00467-g66ba93c0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/ltp/syscalls/debian-x86_64-2015-02-07.cgz/x86_64-rhel/66ba93c0d7fe63def447ad0afe380307ff9ebcad/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-2G-1::dhcp'  -initrd /fs/sdc1/initrd-vm-vp-2G-1 -m 2048 -smp 4 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sdc1/disk0-vm-vp-2G-1,media=disk,if=virtio -drive file=/fs/sdc1/disk1-vm-vp-2G-1,media=disk,if=virtio -drive file=/fs/sdc1/disk2-vm-vp-2G-1,media=disk,if=virtio -drive file=/fs/sdc1/disk3-vm-vp-2G-1,media=disk,if=virtio -drive file=/fs/sdc1/disk4-vm-vp-2G-1,media=disk,if=virtio -drive file=/fs/sdc1/disk5-vm-vp-2G-1,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-vp-2G-1 -serial file:/dev/shm/kboot/serial-vm-vp-2G-1 -daemonize -display none -monitor null 

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [LKP] [fanotify] 66ba93c0d7f: i6300esb: Unexpected close, not stopping watchdog!
  2015-04-23  6:25 ` Huang Ying
@ 2015-04-24 17:42   ` Andrew Morton
  -1 siblings, 0 replies; 7+ messages in thread
From: Andrew Morton @ 2015-04-24 17:42 UTC (permalink / raw)
  To: Huang Ying; +Cc: Lino Sanfilippo, Linus Torvalds, LKML, LKP ML

On Thu, 23 Apr 2015 14:25:38 +0800 Huang Ying <ying.huang@intel.com> wrote:

> FYI, we noticed the below changes on
> 
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> commit 66ba93c0d7fe63def447ad0afe380307ff9ebcad ("fanotify: don't set FAN_ONDIR implicitly on a marks ignored mask")
> 
> When doing LTP test.  Test system hang after doing some fanotify test cases, while system
> can run to reboot in the parent comments.

Thanks.  I've queued a reversion patch.  I'll hold off sending it to
Linus for a while, to see if we can get this fixed up.


What does "hang" mean?  Was the machine all locked up?  Or is it the
case that the particular LTP test failed to complete?  I suspect the
latter - that the new notify behaviour is differing from LTP's
expectation in some fashion?


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [fanotify] 66ba93c0d7f: i6300esb: Unexpected close, not stopping watchdog!
@ 2015-04-24 17:42   ` Andrew Morton
  0 siblings, 0 replies; 7+ messages in thread
From: Andrew Morton @ 2015-04-24 17:42 UTC (permalink / raw)
  To: lkp

[-- Attachment #1: Type: text/plain, Size: 828 bytes --]

On Thu, 23 Apr 2015 14:25:38 +0800 Huang Ying <ying.huang@intel.com> wrote:

> FYI, we noticed the below changes on
> 
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> commit 66ba93c0d7fe63def447ad0afe380307ff9ebcad ("fanotify: don't set FAN_ONDIR implicitly on a marks ignored mask")
> 
> When doing LTP test.  Test system hang after doing some fanotify test cases, while system
> can run to reboot in the parent comments.

Thanks.  I've queued a reversion patch.  I'll hold off sending it to
Linus for a while, to see if we can get this fixed up.


What does "hang" mean?  Was the machine all locked up?  Or is it the
case that the particular LTP test failed to complete?  I suspect the
latter - that the new notify behaviour is differing from LTP's
expectation in some fashion?


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [LKP] [fanotify] 66ba93c0d7f: i6300esb: Unexpected close, not stopping watchdog!
  2015-04-24 17:42   ` Andrew Morton
  (?)
@ 2015-04-24 20:52   ` Lino Sanfilippo
  -1 siblings, 0 replies; 7+ messages in thread
From: Lino Sanfilippo @ 2015-04-24 20:52 UTC (permalink / raw)
  To: Andrew Morton, Huang Ying; +Cc: Linus Torvalds, LKML, LKP ML

On 24.04.2015 19:42, Andrew Morton wrote:
> On Thu, 23 Apr 2015 14:25:38 +0800 Huang Ying <ying.huang@intel.com> wrote:
> 
>> FYI, we noticed the below changes on
>> 
>> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
>> commit 66ba93c0d7fe63def447ad0afe380307ff9ebcad ("fanotify: don't set FAN_ONDIR implicitly on a marks ignored mask")
>> 
>> When doing LTP test.  Test system hang after doing some fanotify test cases, while system
>> can run to reboot in the parent comments.
> 
> Thanks.  I've queued a reversion patch.  I'll hold off sending it to
> Linus for a while, to see if we can get this fixed up.
> 
> 
> What does "hang" mean?  Was the machine all locked up?  Or is it the
> case that the particular LTP test failed to complete?  I suspect the
> latter - that the new notify behaviour is differing from LTP's
> expectation in some fashion?
> 

Hi,

I think your suspicion is right, it looks like an issue that has been
reported a few weeks ago:
http://marc.info/?l=linux-kernel&m=142688498719023&w=2

The reason was not in kernel code though (as assumed by the reporter)
but a missing FAN_ONDIR in the code of the fanotify02 test case (that
flag was not needed before since it was set implicitly under certain
conditions - see the commit message of
66ba93c0d7fe63def447ad0afe380307ff9ebcad for details). The code has been
fixed in the latest version of LTP. I tested fanotify with this version
(20150420) and all tests passed.
Huang could it be that you did not use the latest LTP?

Regards,
Lino

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [LKP] [fanotify] 66ba93c0d7f: i6300esb: Unexpected close, not stopping watchdog!
  2015-04-24 17:42   ` Andrew Morton
@ 2015-05-04  0:49     ` Huang Ying
  -1 siblings, 0 replies; 7+ messages in thread
From: Huang Ying @ 2015-05-04  0:49 UTC (permalink / raw)
  To: Andrew Morton; +Cc: Lino Sanfilippo, Linus Torvalds, LKML, LKP ML

Hi, Andrew,

Sorry for late.  I am in vacation in last week.

On Fri, 2015-04-24 at 10:42 -0700, Andrew Morton wrote:
> On Thu, 23 Apr 2015 14:25:38 +0800 Huang Ying <ying.huang@intel.com> wrote:
> 
> > FYI, we noticed the below changes on
> > 
> > git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> > commit 66ba93c0d7fe63def447ad0afe380307ff9ebcad ("fanotify: don't set FAN_ONDIR implicitly on a marks ignored mask")
> > 
> > When doing LTP test.  Test system hang after doing some fanotify test cases, while system
> > can run to reboot in the parent comments.
> 
> Thanks.  I've queued a reversion patch.  I'll hold off sending it to
> Linus for a while, to see if we can get this fixed up.
> 
> 
> What does "hang" mean?  Was the machine all locked up?  Or is it the
> case that the particular LTP test failed to complete?  I suspect the
> latter - that the new notify behaviour is differing from LTP's
> expectation in some fashion?

Sorry for confusion.  The machine was not locked up, just the LTP test
failed to complete.

Best Regards,
Huang, Ying



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [fanotify] 66ba93c0d7f: i6300esb: Unexpected close, not stopping watchdog!
@ 2015-05-04  0:49     ` Huang Ying
  0 siblings, 0 replies; 7+ messages in thread
From: Huang Ying @ 2015-05-04  0:49 UTC (permalink / raw)
  To: lkp

[-- Attachment #1: Type: text/plain, Size: 1114 bytes --]

Hi, Andrew,

Sorry for late.  I am in vacation in last week.

On Fri, 2015-04-24 at 10:42 -0700, Andrew Morton wrote:
> On Thu, 23 Apr 2015 14:25:38 +0800 Huang Ying <ying.huang@intel.com> wrote:
> 
> > FYI, we noticed the below changes on
> > 
> > git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> > commit 66ba93c0d7fe63def447ad0afe380307ff9ebcad ("fanotify: don't set FAN_ONDIR implicitly on a marks ignored mask")
> > 
> > When doing LTP test.  Test system hang after doing some fanotify test cases, while system
> > can run to reboot in the parent comments.
> 
> Thanks.  I've queued a reversion patch.  I'll hold off sending it to
> Linus for a while, to see if we can get this fixed up.
> 
> 
> What does "hang" mean?  Was the machine all locked up?  Or is it the
> case that the particular LTP test failed to complete?  I suspect the
> latter - that the new notify behaviour is differing from LTP's
> expectation in some fashion?

Sorry for confusion.  The machine was not locked up, just the LTP test
failed to complete.

Best Regards,
Huang, Ying



^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2015-05-04  0:49 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-23  6:25 [LKP] [fanotify] 66ba93c0d7f: i6300esb: Unexpected close, not stopping watchdog! Huang Ying
2015-04-23  6:25 ` Huang Ying
2015-04-24 17:42 ` [LKP] " Andrew Morton
2015-04-24 17:42   ` Andrew Morton
2015-04-24 20:52   ` [LKP] " Lino Sanfilippo
2015-05-04  0:49   ` Huang Ying
2015-05-04  0:49     ` Huang Ying

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.