[PATCHv2 1/3] spi: pxa2xx: Differentiate Intel LPSS types

[PATCHv2 1/3] spi: pxa2xx: Differentiate Intel LPSS types

[Jarkko Nikula]

Intel LPSS SPI properties differ between between platforms. Now private
registers offset 0x400 or 0x800 is autodetected but there is need to
support also other offset and handle a few other differences.

Prepare for that by splitting the LPSS_SSP type into compatible hardware
types and set it now based on PCI or ACPI ID. That type will be used to set
properties that differ between current and upcoming platforms.

Signed-off-by: Jarkko Nikula <jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/spi/spi-pxa2xx-pci.c |  8 ++++----
 drivers/spi/spi-pxa2xx.c     | 44 ++++++++++++++++++++++++++++++--------------
 include/linux/pxa2xx_ssp.h   |  3 ++-
 3 files changed, 36 insertions(+), 19 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index fa7399e84bbb..3cfd4357489a 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -62,7 +62,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.max_clk_rate = 3686400,
 	},
 	[PORT_BYT] = {
-		.type = LPSS_SSP,
+		.type = LPSS_BYT_SSP,
 		.port_id = 0,
 		.num_chipselect = 1,
 		.max_clk_rate = 50000000,
@@ -70,7 +70,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.rx_param = &byt_rx_param,
 	},
 	[PORT_BSW0] = {
-		.type = LPSS_SSP,
+		.type = LPSS_BYT_SSP,
 		.port_id = 0,
 		.num_chipselect = 1,
 		.max_clk_rate = 50000000,
@@ -78,7 +78,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.rx_param = &bsw0_rx_param,
 	},
 	[PORT_BSW1] = {
-		.type = LPSS_SSP,
+		.type = LPSS_BYT_SSP,
 		.port_id = 1,
 		.num_chipselect = 1,
 		.max_clk_rate = 50000000,
@@ -86,7 +86,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.rx_param = &bsw1_rx_param,
 	},
 	[PORT_BSW2] = {
-		.type = LPSS_SSP,
+		.type = LPSS_BYT_SSP,
 		.port_id = 2,
 		.num_chipselect = 1,
 		.max_clk_rate = 50000000,
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index e3223ac75a7c..a85b7496a3cd 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -74,7 +74,13 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 
 static bool is_lpss_ssp(const struct driver_data *drv_data)
 {
-	return drv_data->ssp_type == LPSS_SSP;
+	switch (drv_data->ssp_type) {
+	case LPSS_LPT_SSP:
+	case LPSS_BYT_SSP:
+		return true;
+	default:
+		return false;
+	}
 }
 
 static bool is_quark_x1000_ssp(const struct driver_data *drv_data)
@@ -1085,7 +1091,8 @@ static int setup(struct spi_device *spi)
 		tx_hi_thres = 0;
 		rx_thres = RX_THRESH_QUARK_X1000_DFLT;
 		break;
-	case LPSS_SSP:
+	case LPSS_LPT_SSP:
+	case LPSS_BYT_SSP:
 		tx_thres = LPSS_TX_LOTHRESH_DFLT;
 		tx_hi_thres = LPSS_TX_HITHRESH_DFLT;
 		rx_thres = LPSS_RX_THRESH_DFLT;
@@ -1242,6 +1249,18 @@ static void cleanup(struct spi_device *spi)
 }
 
 #ifdef CONFIG_ACPI
+
+static struct acpi_device_id pxa2xx_spi_acpi_match[] = {
+	{ "INT33C0", LPSS_LPT_SSP },
+	{ "INT33C1", LPSS_LPT_SSP },
+	{ "INT3430", LPSS_LPT_SSP },
+	{ "INT3431", LPSS_LPT_SSP },
+	{ "80860F0E", LPSS_BYT_SSP },
+	{ "8086228E", LPSS_BYT_SSP },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
+
 static struct pxa2xx_spi_master *
 pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 {
@@ -1249,12 +1268,19 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 	struct acpi_device *adev;
 	struct ssp_device *ssp;
 	struct resource *res;
-	int devid;
+	const struct acpi_device_id *id;
+	int devid, type;
 
 	if (!ACPI_HANDLE(&pdev->dev) ||
 	    acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
 		return NULL;
 
+	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+	if (id)
+		type = (int)id->driver_data;
+	else
+		return NULL;
+
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return NULL;
@@ -1272,7 +1298,7 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 
 	ssp->clk = devm_clk_get(&pdev->dev, NULL);
 	ssp->irq = platform_get_irq(pdev, 0);
-	ssp->type = LPSS_SSP;
+	ssp->type = type;
 	ssp->pdev = pdev;
 
 	ssp->port_id = -1;
@@ -1285,16 +1311,6 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 	return pdata;
 }
 
-static struct acpi_device_id pxa2xx_spi_acpi_match[] = {
-	{ "INT33C0", 0 },
-	{ "INT33C1", 0 },
-	{ "INT3430", 0 },
-	{ "INT3431", 0 },
-	{ "80860F0E", 0 },
-	{ "8086228E", 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
 #else
 static inline struct pxa2xx_spi_master *
 pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index dab545bb66b3..95a4b3bd7a5c 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -194,8 +194,9 @@ enum pxa_ssp_type {
 	PXA168_SSP,
 	PXA910_SSP,
 	CE4100_SSP,
-	LPSS_SSP,
 	QUARK_X1000_SSP,
+	LPSS_LPT_SSP,
+	LPSS_BYT_SSP,
 };
 
 struct ssp_device {
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv2 2/3] spi: pxa2xx: Prepare for new Intel LPSS SPI type

[Jarkko Nikula]

Some of the Intel LPSS SPI properties will be different in upcoming
platforms compared to existing Lynxpoint and BayTrail/Braswell. LPSS SPI
private registers will be at different offset and there will be changes in
individual registers and default FIFO thresholds too.

Add configuration for these differences and use them in runtime based on
LPSS SSP type. With this change private registers offset autodetection
becomes needless.

Signed-off-by: Jarkko Nikula <jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/spi/spi-pxa2xx.c   | 107 +++++++++++++++++++++++++--------------------
 include/linux/pxa2xx_ssp.h |   2 +-
 2 files changed, 60 insertions(+), 49 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index a85b7496a3cd..3fec31dbf972 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -60,18 +60,51 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 				| QUARK_X1000_SSCR1_TFT		\
 				| SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
 
-#define LPSS_RX_THRESH_DFLT	64
-#define LPSS_TX_LOTHRESH_DFLT	160
-#define LPSS_TX_HITHRESH_DFLT	224
-
-/* Offset from drv_data->lpss_base */
-#define GENERAL_REG		0x08
 #define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24)
-#define SSP_REG			0x0c
-#define SPI_CS_CONTROL		0x18
 #define SPI_CS_CONTROL_SW_MODE	BIT(0)
 #define SPI_CS_CONTROL_CS_HIGH	BIT(1)
 
+struct lpss_config {
+	/* LPSS offset from drv_data->ioaddr */
+	unsigned offset;
+	/* Register offsets from drv_data->lpss_base or -1 */
+	int reg_general;
+	int reg_ssp;
+	int reg_cs_ctrl;
+	/* FIFO thresholds */
+	u32 rx_threshold;
+	u32 tx_threshold_lo;
+	u32 tx_threshold_hi;
+};
+
+/* Keep these sorted with enum pxa_ssp_type */
+static const struct lpss_config lpss_platforms[] = {
+	{	/* LPSS_LPT_SSP */
+		.offset = 0x800,
+		.reg_general = 0x08,
+		.reg_ssp = 0x0c,
+		.reg_cs_ctrl = 0x18,
+		.rx_threshold = 64,
+		.tx_threshold_lo = 160,
+		.tx_threshold_hi = 224,
+	},
+	{	/* LPSS_BYT_SSP */
+		.offset = 0x400,
+		.reg_general = 0x08,
+		.reg_ssp = 0x0c,
+		.reg_cs_ctrl = 0x18,
+		.rx_threshold = 64,
+		.tx_threshold_lo = 160,
+		.tx_threshold_hi = 224,
+	},
+};
+
+static inline const struct lpss_config
+*lpss_get_config(const struct driver_data *drv_data)
+{
+	return &lpss_platforms[drv_data->ssp_type - LPSS_LPT_SSP];
+}
+
 static bool is_lpss_ssp(const struct driver_data *drv_data)
 {
 	switch (drv_data->ssp_type) {
@@ -198,63 +231,39 @@ static void __lpss_ssp_write_priv(struct driver_data *drv_data,
  */
 static void lpss_ssp_setup(struct driver_data *drv_data)
 {
-	unsigned offset = 0x400;
-	u32 value, orig;
-
-	/*
-	 * Perform auto-detection of the LPSS SSP private registers. They
-	 * can be either at 1k or 2k offset from the base address.
-	 */
-	orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
-
-	/* Test SPI_CS_CONTROL_SW_MODE bit enabling */
-	value = orig | SPI_CS_CONTROL_SW_MODE;
-	writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL);
-	value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
-	if (value != (orig | SPI_CS_CONTROL_SW_MODE)) {
-		offset = 0x800;
-		goto detection_done;
-	}
-
-	orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
-
-	/* Test SPI_CS_CONTROL_SW_MODE bit disabling */
-	value = orig & ~SPI_CS_CONTROL_SW_MODE;
-	writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL);
-	value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
-	if (value != (orig & ~SPI_CS_CONTROL_SW_MODE)) {
-		offset = 0x800;
-		goto detection_done;
-	}
+	const struct lpss_config *config;
+	u32 value;
 
-detection_done:
-	/* Now set the LPSS base */
-	drv_data->lpss_base = drv_data->ioaddr + offset;
+	config = lpss_get_config(drv_data);
+	drv_data->lpss_base = drv_data->ioaddr + config->offset;
 
 	/* Enable software chip select control */
 	value = SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH;
-	__lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value);
+	__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
 
 	/* Enable multiblock DMA transfers */
 	if (drv_data->master_info->enable_dma) {
-		__lpss_ssp_write_priv(drv_data, SSP_REG, 1);
+		__lpss_ssp_write_priv(drv_data, config->reg_ssp, 1);
 
-		value = __lpss_ssp_read_priv(drv_data, GENERAL_REG);
+		value = __lpss_ssp_read_priv(drv_data, config->reg_general);
 		value |= GENERAL_REG_RXTO_HOLDOFF_DISABLE;
-		__lpss_ssp_write_priv(drv_data, GENERAL_REG, value);
+		__lpss_ssp_write_priv(drv_data, config->reg_general, value);
 	}
 }
 
 static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable)
 {
+	const struct lpss_config *config;
 	u32 value;
 
-	value = __lpss_ssp_read_priv(drv_data, SPI_CS_CONTROL);
+	config = lpss_get_config(drv_data);
+
+	value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
 	if (enable)
 		value &= ~SPI_CS_CONTROL_CS_HIGH;
 	else
 		value |= SPI_CS_CONTROL_CS_HIGH;
-	__lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value);
+	__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
 }
 
 static void cs_assert(struct driver_data *drv_data)
@@ -1081,6 +1090,7 @@ static int setup(struct spi_device *spi)
 {
 	struct pxa2xx_spi_chip *chip_info = NULL;
 	struct chip_data *chip;
+	const struct lpss_config *config;
 	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
 	unsigned int clk_div;
 	uint tx_thres, tx_hi_thres, rx_thres;
@@ -1093,9 +1103,10 @@ static int setup(struct spi_device *spi)
 		break;
 	case LPSS_LPT_SSP:
 	case LPSS_BYT_SSP:
-		tx_thres = LPSS_TX_LOTHRESH_DFLT;
-		tx_hi_thres = LPSS_TX_HITHRESH_DFLT;
-		rx_thres = LPSS_RX_THRESH_DFLT;
+		config = lpss_get_config(drv_data);
+		tx_thres = config->tx_threshold_lo;
+		tx_hi_thres = config->tx_threshold_hi;
+		rx_thres = config->rx_threshold;
 		break;
 	default:
 		tx_thres = TX_THRESH_DFLT;
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 95a4b3bd7a5c..0485bab061fd 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -195,7 +195,7 @@ enum pxa_ssp_type {
 	PXA910_SSP,
 	CE4100_SSP,
 	QUARK_X1000_SSP,
-	LPSS_LPT_SSP,
+	LPSS_LPT_SSP, /* Keep LPSS types sorted with lpss_platforms[] */
 	LPSS_BYT_SSP,
 };
 
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv2 3/3] spi: pxa2xx: Make LPSS SPI general register optional

[Jarkko Nikula]

General register located in LPSS SPI private register space is not found in
upcoming Intel LPSS platforms. Access it conditionally depending is it
defined in configuration.

Signed-off-by: Jarkko Nikula <jarkko.nikula-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/spi/spi-pxa2xx.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 3fec31dbf972..f97cd42fbc22 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -245,9 +245,13 @@ static void lpss_ssp_setup(struct driver_data *drv_data)
 	if (drv_data->master_info->enable_dma) {
 		__lpss_ssp_write_priv(drv_data, config->reg_ssp, 1);
 
-		value = __lpss_ssp_read_priv(drv_data, config->reg_general);
-		value |= GENERAL_REG_RXTO_HOLDOFF_DISABLE;
-		__lpss_ssp_write_priv(drv_data, config->reg_general, value);
+		if (config->reg_general >= 0) {
+			value = __lpss_ssp_read_priv(drv_data,
+						     config->reg_general);
+			value |= GENERAL_REG_RXTO_HOLDOFF_DISABLE;
+			__lpss_ssp_write_priv(drv_data,
+					      config->reg_general, value);
+		}
 	}
 }
 
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv2 1/3] spi: pxa2xx: Differentiate Intel LPSS types

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 294 bytes --]

On Thu, Jun 04, 2015 at 04:55:10PM +0300, Jarkko Nikula wrote:
> Intel LPSS SPI properties differ between between platforms. Now private
> registers offset 0x400 or 0x800 is autodetected but there is need to
> support also other offset and handle a few other differences.

Applied all, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]