[PATCH Part1 v11 0/5] Some cleanup for pcie host drivers

[PATCH Part1 v11 0/5] Some cleanup for pcie host drivers

[Yijing Wang]

These patches are split out from patchset(patch 5 is new)
"Refine PCI scan interfaces and make generic pci host bridge".
They are independent of the series, pci_bus_add_devices()
has been ripped out from pci_scan_root_bus(), so we could
use pci_scan_root_bus() instead of pci_create_root_bus() + 
pci_scan_child_bus() for simplicity. Also this is the preparation
for the series.

Yijing Wang (5):
  PCI: mvebu: Use pci_common_init_dev() to simplify code
  PCI: tegra: Remove redundant tegra_pcie_scan_bus()
  PCI: designware: Use pci_scan_root_bus() for simplicity
  PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()
  PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()

 drivers/pci/host/pci-mvebu.c       |   18 +-----------------
 drivers/pci/host/pci-tegra.c       |   16 ----------------
 drivers/pci/host/pci-xgene.c       |    3 +--
 drivers/pci/host/pcie-designware.c |    4 +---
 drivers/pci/host/pcie-iproc.c      |    5 ++---
 5 files changed, 5 insertions(+), 41 deletions(-)

[PATCH Part1 v11 0/5] Some cleanup for pcie host drivers

[Yijing Wang]

These patches are split out from patchset(patch 5 is new)
"Refine PCI scan interfaces and make generic pci host bridge".
They are independent of the series, pci_bus_add_devices()
has been ripped out from pci_scan_root_bus(), so we could
use pci_scan_root_bus() instead of pci_create_root_bus() + 
pci_scan_child_bus() for simplicity. Also this is the preparation
for the series.

Yijing Wang (5):
  PCI: mvebu: Use pci_common_init_dev() to simplify code
  PCI: tegra: Remove redundant tegra_pcie_scan_bus()
  PCI: designware: Use pci_scan_root_bus() for simplicity
  PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()
  PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()

 drivers/pci/host/pci-mvebu.c       |   18 +-----------------
 drivers/pci/host/pci-tegra.c       |   16 ----------------
 drivers/pci/host/pci-xgene.c       |    3 +--
 drivers/pci/host/pcie-designware.c |    4 +---
 drivers/pci/host/pcie-iproc.c      |    5 ++---
 5 files changed, 5 insertions(+), 41 deletions(-)

[PATCH Part1 v11 1/5] PCI: mvebu: Use pci_common_init_dev() to simplify code

[Yijing Wang]

Mvebu_pcie_scan_bus() is not necessary, we could use
pci_common_init_dev() instead of pci_common_init(),
and pass the device pointer as the parent. Then
pci_scan_root_bus() will be called to scan the pci busses.

Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Jason Cooper <jason@lakedaemon.net>
---
 drivers/pci/host/pci-mvebu.c |   18 +-----------------
 1 files changed, 1 insertions(+), 17 deletions(-)

diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 1ab8635..70aa095 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -751,21 +751,6 @@ static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct mvebu_pcie *pcie = sys_to_pcie(sys);
-	struct pci_bus *bus;
-
-	bus = pci_create_root_bus(&pcie->pdev->dev, sys->busnr,
-				  &mvebu_pcie_ops, sys, &sys->resources);
-	if (!bus)
-		return NULL;
-
-	pci_scan_child_bus(bus);
-
-	return bus;
-}
-
 static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
 						 const struct resource *res,
 						 resource_size_t start,
@@ -809,12 +794,11 @@ static void mvebu_pcie_enable(struct mvebu_pcie *pcie)
 	hw.nr_controllers = 1;
 	hw.private_data   = (void **)&pcie;
 	hw.setup          = mvebu_pcie_setup;
-	hw.scan           = mvebu_pcie_scan_bus;
 	hw.map_irq        = of_irq_parse_and_map_pci;
 	hw.ops            = &mvebu_pcie_ops;
 	hw.align_resource = mvebu_pcie_align_resource;
 
-	pci_common_init(&hw);
+	pci_common_init_dev(&pcie->pdev->dev, &hw);
 }
 
 /*
-- 
1.7.1

[PATCH Part1 v11 1/5] PCI: mvebu: Use pci_common_init_dev() to simplify code

[Yijing Wang]

Mvebu_pcie_scan_bus() is not necessary, we could use
pci_common_init_dev() instead of pci_common_init(),
and pass the device pointer as the parent. Then
pci_scan_root_bus() will be called to scan the pci busses.

Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Jason Cooper <jason@lakedaemon.net>
---
 drivers/pci/host/pci-mvebu.c |   18 +-----------------
 1 files changed, 1 insertions(+), 17 deletions(-)

diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 1ab8635..70aa095 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -751,21 +751,6 @@ static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct mvebu_pcie *pcie = sys_to_pcie(sys);
-	struct pci_bus *bus;
-
-	bus = pci_create_root_bus(&pcie->pdev->dev, sys->busnr,
-				  &mvebu_pcie_ops, sys, &sys->resources);
-	if (!bus)
-		return NULL;
-
-	pci_scan_child_bus(bus);
-
-	return bus;
-}
-
 static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
 						 const struct resource *res,
 						 resource_size_t start,
@@ -809,12 +794,11 @@ static void mvebu_pcie_enable(struct mvebu_pcie *pcie)
 	hw.nr_controllers = 1;
 	hw.private_data   = (void **)&pcie;
 	hw.setup          = mvebu_pcie_setup;
-	hw.scan           = mvebu_pcie_scan_bus;
 	hw.map_irq        = of_irq_parse_and_map_pci;
 	hw.ops            = &mvebu_pcie_ops;
 	hw.align_resource = mvebu_pcie_align_resource;
 
-	pci_common_init(&hw);
+	pci_common_init_dev(&pcie->pdev->dev, &hw);
 }
 
 /*
-- 
1.7.1

Re: [PATCH Part1 v11 1/5] PCI: mvebu: Use pci_common_init_dev() to simplify code

[Bjorn Helgaas]

On Tue, Apr 28, 2015 at 03:01:35PM +0800, Yijing Wang wrote:
> Mvebu_pcie_scan_bus() is not necessary, we could use
> pci_common_init_dev() instead of pci_common_init(),
> and pass the device pointer as the parent. Then
> pci_scan_root_bus() will be called to scan the pci busses.
> 
> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> CC: Jason Cooper <jason@lakedaemon.net>

Thomas, Jason, any input?

> ---
>  drivers/pci/host/pci-mvebu.c |   18 +-----------------
>  1 files changed, 1 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
> index 1ab8635..70aa095 100644
> --- a/drivers/pci/host/pci-mvebu.c
> +++ b/drivers/pci/host/pci-mvebu.c
> @@ -751,21 +751,6 @@ static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
>  	return 1;
>  }
>  
> -static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys)
> -{
> -	struct mvebu_pcie *pcie = sys_to_pcie(sys);
> -	struct pci_bus *bus;
> -
> -	bus = pci_create_root_bus(&pcie->pdev->dev, sys->busnr,
> -				  &mvebu_pcie_ops, sys, &sys->resources);
> -	if (!bus)
> -		return NULL;
> -
> -	pci_scan_child_bus(bus);
> -
> -	return bus;
> -}
> -
>  static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
>  						 const struct resource *res,
>  						 resource_size_t start,
> @@ -809,12 +794,11 @@ static void mvebu_pcie_enable(struct mvebu_pcie *pcie)
>  	hw.nr_controllers = 1;
>  	hw.private_data   = (void **)&pcie;
>  	hw.setup          = mvebu_pcie_setup;
> -	hw.scan           = mvebu_pcie_scan_bus;
>  	hw.map_irq        = of_irq_parse_and_map_pci;
>  	hw.ops            = &mvebu_pcie_ops;
>  	hw.align_resource = mvebu_pcie_align_resource;
>  
> -	pci_common_init(&hw);
> +	pci_common_init_dev(&pcie->pdev->dev, &hw);
>  }
>  
>  /*
> -- 
> 1.7.1
> 

[PATCH Part1 v11 1/5] PCI: mvebu: Use pci_common_init_dev() to simplify code

[Bjorn Helgaas]

On Tue, Apr 28, 2015 at 03:01:35PM +0800, Yijing Wang wrote:
> Mvebu_pcie_scan_bus() is not necessary, we could use
> pci_common_init_dev() instead of pci_common_init(),
> and pass the device pointer as the parent. Then
> pci_scan_root_bus() will be called to scan the pci busses.
> 
> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> CC: Jason Cooper <jason@lakedaemon.net>

Thomas, Jason, any input?

> ---
>  drivers/pci/host/pci-mvebu.c |   18 +-----------------
>  1 files changed, 1 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
> index 1ab8635..70aa095 100644
> --- a/drivers/pci/host/pci-mvebu.c
> +++ b/drivers/pci/host/pci-mvebu.c
> @@ -751,21 +751,6 @@ static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
>  	return 1;
>  }
>  
> -static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys)
> -{
> -	struct mvebu_pcie *pcie = sys_to_pcie(sys);
> -	struct pci_bus *bus;
> -
> -	bus = pci_create_root_bus(&pcie->pdev->dev, sys->busnr,
> -				  &mvebu_pcie_ops, sys, &sys->resources);
> -	if (!bus)
> -		return NULL;
> -
> -	pci_scan_child_bus(bus);
> -
> -	return bus;
> -}
> -
>  static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
>  						 const struct resource *res,
>  						 resource_size_t start,
> @@ -809,12 +794,11 @@ static void mvebu_pcie_enable(struct mvebu_pcie *pcie)
>  	hw.nr_controllers = 1;
>  	hw.private_data   = (void **)&pcie;
>  	hw.setup          = mvebu_pcie_setup;
> -	hw.scan           = mvebu_pcie_scan_bus;
>  	hw.map_irq        = of_irq_parse_and_map_pci;
>  	hw.ops            = &mvebu_pcie_ops;
>  	hw.align_resource = mvebu_pcie_align_resource;
>  
> -	pci_common_init(&hw);
> +	pci_common_init_dev(&pcie->pdev->dev, &hw);
>  }
>  
>  /*
> -- 
> 1.7.1
> 

[PATCH Part1 v11 2/5] PCI: tegra: Remove redundant tegra_pcie_scan_bus()

[Yijing Wang]

Now pci_scan_root_bus() is almost similar to
pci_create_root_bus() + pci_scan_child_bus().
So we could use common pci_scan_root_bus() in
pci_common_init_dev() to scan pci busses.
tegra_pcie_scan_bus() is redundant, remove it.

Tested-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
CC: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
CC: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 drivers/pci/host/pci-tegra.c |   16 ----------------
 1 files changed, 0 insertions(+), 16 deletions(-)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 00e9272..10c0571 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -630,21 +630,6 @@ static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 	return irq;
 }
 
-static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct tegra_pcie *pcie = sys_to_pcie(sys);
-	struct pci_bus *bus;
-
-	bus = pci_create_root_bus(pcie->dev, sys->busnr, &tegra_pcie_ops, sys,
-				  &sys->resources);
-	if (!bus)
-		return NULL;
-
-	pci_scan_child_bus(bus);
-
-	return bus;
-}
-
 static irqreturn_t tegra_pcie_isr(int irq, void *arg)
 {
 	const char *err_msg[] = {
@@ -1831,7 +1816,6 @@ static int tegra_pcie_enable(struct tegra_pcie *pcie)
 	hw.private_data = (void **)&pcie;
 	hw.setup = tegra_pcie_setup;
 	hw.map_irq = tegra_pcie_map_irq;
-	hw.scan = tegra_pcie_scan_bus;
 	hw.ops = &tegra_pcie_ops;
 
 	pci_common_init_dev(pcie->dev, &hw);
-- 
1.7.1

[PATCH Part1 v11 2/5] PCI: tegra: Remove redundant tegra_pcie_scan_bus()

[Yijing Wang]

Now pci_scan_root_bus() is almost similar to
pci_create_root_bus() + pci_scan_child_bus().
So we could use common pci_scan_root_bus() in
pci_common_init_dev() to scan pci busses.
tegra_pcie_scan_bus() is redundant, remove it.

Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Thierry Reding <treding@nvidia.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: linux-tegra at vger.kernel.org
---
 drivers/pci/host/pci-tegra.c |   16 ----------------
 1 files changed, 0 insertions(+), 16 deletions(-)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 00e9272..10c0571 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -630,21 +630,6 @@ static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 	return irq;
 }
 
-static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct tegra_pcie *pcie = sys_to_pcie(sys);
-	struct pci_bus *bus;
-
-	bus = pci_create_root_bus(pcie->dev, sys->busnr, &tegra_pcie_ops, sys,
-				  &sys->resources);
-	if (!bus)
-		return NULL;
-
-	pci_scan_child_bus(bus);
-
-	return bus;
-}
-
 static irqreturn_t tegra_pcie_isr(int irq, void *arg)
 {
 	const char *err_msg[] = {
@@ -1831,7 +1816,6 @@ static int tegra_pcie_enable(struct tegra_pcie *pcie)
 	hw.private_data = (void **)&pcie;
 	hw.setup = tegra_pcie_setup;
 	hw.map_irq = tegra_pcie_map_irq;
-	hw.scan = tegra_pcie_scan_bus;
 	hw.ops = &tegra_pcie_ops;
 
 	pci_common_init_dev(pcie->dev, &hw);
-- 
1.7.1

[PATCH Part1 v11 2/5] PCI: tegra: Remove redundant tegra_pcie_scan_bus()

[Yijing Wang]

Now pci_scan_root_bus() is almost similar to
pci_create_root_bus() + pci_scan_child_bus().
So we could use common pci_scan_root_bus() in
pci_common_init_dev() to scan pci busses.
tegra_pcie_scan_bus() is redundant, remove it.

Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Thierry Reding <treding@nvidia.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: linux-tegra@vger.kernel.org
---
 drivers/pci/host/pci-tegra.c |   16 ----------------
 1 files changed, 0 insertions(+), 16 deletions(-)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 00e9272..10c0571 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -630,21 +630,6 @@ static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 	return irq;
 }
 
-static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct tegra_pcie *pcie = sys_to_pcie(sys);
-	struct pci_bus *bus;
-
-	bus = pci_create_root_bus(pcie->dev, sys->busnr, &tegra_pcie_ops, sys,
-				  &sys->resources);
-	if (!bus)
-		return NULL;
-
-	pci_scan_child_bus(bus);
-
-	return bus;
-}
-
 static irqreturn_t tegra_pcie_isr(int irq, void *arg)
 {
 	const char *err_msg[] = {
@@ -1831,7 +1816,6 @@ static int tegra_pcie_enable(struct tegra_pcie *pcie)
 	hw.private_data = (void **)&pcie;
 	hw.setup = tegra_pcie_setup;
 	hw.map_irq = tegra_pcie_map_irq;
-	hw.scan = tegra_pcie_scan_bus;
 	hw.ops = &tegra_pcie_ops;
 
 	pci_common_init_dev(pcie->dev, &hw);
-- 
1.7.1

[PATCH Part1 v11 3/5] PCI: designware: Use pci_scan_root_bus() for simplicity

[Yijing Wang]

Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
Now pci_scan_root_bus() == pci_create_root_bus() +
pci_scan_child_bus() if busn resource is supplied.
Designware added the busn resource to resources list
in dw_pcie_setup(). So it should be safe to use
pci_scan_root_bus() instead.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Mohit Kumar <mohit.kumar@st.com>
CC: Jingoo Han <jg1.han@samsung.com>
---
 drivers/pci/host/pcie-designware.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 2e9f84f..8c80f38 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -728,13 +728,11 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 	struct pcie_port *pp = sys_to_pcie(sys);
 
 	pp->root_bus_nr = sys->busnr;
-	bus = pci_create_root_bus(pp->dev, sys->busnr,
+	bus = pci_scan_root_bus(pp->dev, sys->busnr,
 				  &dw_pcie_ops, sys, &sys->resources);
 	if (!bus)
 		return NULL;
 
-	pci_scan_child_bus(bus);
-
 	if (bus && pp->ops->scan_bus)
 		pp->ops->scan_bus(pp);
 
-- 
1.7.1

[PATCH Part1 v11 3/5] PCI: designware: Use pci_scan_root_bus() for simplicity

[Yijing Wang]

Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
Now pci_scan_root_bus() == pci_create_root_bus() +
pci_scan_child_bus() if busn resource is supplied.
Designware added the busn resource to resources list
in dw_pcie_setup(). So it should be safe to use
pci_scan_root_bus() instead.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Mohit Kumar <mohit.kumar@st.com>
CC: Jingoo Han <jg1.han@samsung.com>
---
 drivers/pci/host/pcie-designware.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 2e9f84f..8c80f38 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -728,13 +728,11 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 	struct pcie_port *pp = sys_to_pcie(sys);
 
 	pp->root_bus_nr = sys->busnr;
-	bus = pci_create_root_bus(pp->dev, sys->busnr,
+	bus = pci_scan_root_bus(pp->dev, sys->busnr,
 				  &dw_pcie_ops, sys, &sys->resources);
 	if (!bus)
 		return NULL;
 
-	pci_scan_child_bus(bus);
-
 	if (bus && pp->ops->scan_bus)
 		pp->ops->scan_bus(pp);
 
-- 
1.7.1

Re: [PATCH Part1 v11 3/5] PCI: designware: Use pci_scan_root_bus() for simplicity

[Lucas Stach]

Am Dienstag, den 28.04.2015, 15:01 +0800 schrieb Yijing Wang:
> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
> Now pci_scan_root_bus() == pci_create_root_bus() +
> pci_scan_child_bus() if busn resource is supplied.
> Designware added the busn resource to resources list
> in dw_pcie_setup(). So it should be safe to use
> pci_scan_root_bus() instead.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> CC: Mohit Kumar <mohit.kumar@st.com>
> CC: Jingoo Han <jg1.han@samsung.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
>  drivers/pci/host/pcie-designware.c |    4 +---
>  1 files changed, 1 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 2e9f84f..8c80f38 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -728,13 +728,11 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
>  	struct pcie_port *pp = sys_to_pcie(sys);
>  
>  	pp->root_bus_nr = sys->busnr;
> -	bus = pci_create_root_bus(pp->dev, sys->busnr,
> +	bus = pci_scan_root_bus(pp->dev, sys->busnr,
>  				  &dw_pcie_ops, sys, &sys->resources);
>  	if (!bus)
>  		return NULL;
>  
> -	pci_scan_child_bus(bus);
> -
>  	if (bus && pp->ops->scan_bus)
>  		pp->ops->scan_bus(pp);
>  

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

[PATCH Part1 v11 3/5] PCI: designware: Use pci_scan_root_bus() for simplicity

[Lucas Stach]

Am Dienstag, den 28.04.2015, 15:01 +0800 schrieb Yijing Wang:
> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
> Now pci_scan_root_bus() == pci_create_root_bus() +
> pci_scan_child_bus() if busn resource is supplied.
> Designware added the busn resource to resources list
> in dw_pcie_setup(). So it should be safe to use
> pci_scan_root_bus() instead.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> CC: Mohit Kumar <mohit.kumar@st.com>
> CC: Jingoo Han <jg1.han@samsung.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
>  drivers/pci/host/pcie-designware.c |    4 +---
>  1 files changed, 1 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 2e9f84f..8c80f38 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -728,13 +728,11 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
>  	struct pcie_port *pp = sys_to_pcie(sys);
>  
>  	pp->root_bus_nr = sys->busnr;
> -	bus = pci_create_root_bus(pp->dev, sys->busnr,
> +	bus = pci_scan_root_bus(pp->dev, sys->busnr,
>  				  &dw_pcie_ops, sys, &sys->resources);
>  	if (!bus)
>  		return NULL;
>  
> -	pci_scan_child_bus(bus);
> -
>  	if (bus && pp->ops->scan_bus)
>  		pp->ops->scan_bus(pp);
>  

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

Re: [PATCH Part1 v11 3/5] PCI: designware: Use pci_scan_root_bus() for simplicity

[Bjorn Helgaas]

[+cc Pratyush]

On Tue, Apr 28, 2015 at 03:01:37PM +0800, Yijing Wang wrote:
> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
> Now pci_scan_root_bus() == pci_create_root_bus() +
> pci_scan_child_bus() if busn resource is supplied.
> Designware added the busn resource to resources list
> in dw_pcie_setup(). So it should be safe to use
> pci_scan_root_bus() instead.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> CC: Mohit Kumar <mohit.kumar@st.com>
> CC: Jingoo Han <jg1.han@samsung.com>

Jingoo, Pratyush?

> ---
>  drivers/pci/host/pcie-designware.c |    4 +---
>  1 files changed, 1 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 2e9f84f..8c80f38 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -728,13 +728,11 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
>  	struct pcie_port *pp = sys_to_pcie(sys);
>  
>  	pp->root_bus_nr = sys->busnr;
> -	bus = pci_create_root_bus(pp->dev, sys->busnr,
> +	bus = pci_scan_root_bus(pp->dev, sys->busnr,
>  				  &dw_pcie_ops, sys, &sys->resources);
>  	if (!bus)
>  		return NULL;
>  
> -	pci_scan_child_bus(bus);
> -
>  	if (bus && pp->ops->scan_bus)
>  		pp->ops->scan_bus(pp);
>  
> -- 
> 1.7.1
> 

[PATCH Part1 v11 3/5] PCI: designware: Use pci_scan_root_bus() for simplicity

[Bjorn Helgaas]

[+cc Pratyush]

On Tue, Apr 28, 2015 at 03:01:37PM +0800, Yijing Wang wrote:
> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
> Now pci_scan_root_bus() == pci_create_root_bus() +
> pci_scan_child_bus() if busn resource is supplied.
> Designware added the busn resource to resources list
> in dw_pcie_setup(). So it should be safe to use
> pci_scan_root_bus() instead.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> CC: Mohit Kumar <mohit.kumar@st.com>
> CC: Jingoo Han <jg1.han@samsung.com>

Jingoo, Pratyush?

> ---
>  drivers/pci/host/pcie-designware.c |    4 +---
>  1 files changed, 1 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 2e9f84f..8c80f38 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -728,13 +728,11 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
>  	struct pcie_port *pp = sys_to_pcie(sys);
>  
>  	pp->root_bus_nr = sys->busnr;
> -	bus = pci_create_root_bus(pp->dev, sys->busnr,
> +	bus = pci_scan_root_bus(pp->dev, sys->busnr,
>  				  &dw_pcie_ops, sys, &sys->resources);
>  	if (!bus)
>  		return NULL;
>  
> -	pci_scan_child_bus(bus);
> -
>  	if (bus && pp->ops->scan_bus)
>  		pp->ops->scan_bus(pp);
>  
> -- 
> 1.7.1
> 

[PATCH Part1 v11 4/5] PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Yijing Wang]

Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
Now pci_scan_root_bus() == pci_create_root_bus() +
pci_scan_child_bus() if busn resource is supplied.
Xgene added the busn resource to resources list
in of_pci_get_host_bridge_resources(). So it should be safe
to use pci_scan_root_bus() instead.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Tanmay Inamdar <tinamdar@apm.com>
---
 drivers/pci/host/pci-xgene.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
index ee082c0..87e3962 100644
--- a/drivers/pci/host/pci-xgene.c
+++ b/drivers/pci/host/pci-xgene.c
@@ -499,12 +499,11 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	bus = pci_create_root_bus(&pdev->dev, 0,
+	bus = pci_scan_root_bus(&pdev->dev, 0,
 					&xgene_pcie_ops, port, &res);
 	if (!bus)
 		return -ENOMEM;
 
-	pci_scan_child_bus(bus);
 	pci_assign_unassigned_bus_resources(bus);
 	pci_bus_add_devices(bus);
 
-- 
1.7.1

[PATCH Part1 v11 4/5] PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Yijing Wang]

Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
Now pci_scan_root_bus() == pci_create_root_bus() +
pci_scan_child_bus() if busn resource is supplied.
Xgene added the busn resource to resources list
in of_pci_get_host_bridge_resources(). So it should be safe
to use pci_scan_root_bus() instead.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Tanmay Inamdar <tinamdar@apm.com>
---
 drivers/pci/host/pci-xgene.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
index ee082c0..87e3962 100644
--- a/drivers/pci/host/pci-xgene.c
+++ b/drivers/pci/host/pci-xgene.c
@@ -499,12 +499,11 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	bus = pci_create_root_bus(&pdev->dev, 0,
+	bus = pci_scan_root_bus(&pdev->dev, 0,
 					&xgene_pcie_ops, port, &res);
 	if (!bus)
 		return -ENOMEM;
 
-	pci_scan_child_bus(bus);
 	pci_assign_unassigned_bus_resources(bus);
 	pci_bus_add_devices(bus);
 
-- 
1.7.1

Re: [PATCH Part1 v11 4/5] PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Bjorn Helgaas]

On Tue, Apr 28, 2015 at 03:01:38PM +0800, Yijing Wang wrote:
> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
> Now pci_scan_root_bus() == pci_create_root_bus() +
> pci_scan_child_bus() if busn resource is supplied.
> Xgene added the busn resource to resources list
> in of_pci_get_host_bridge_resources(). So it should be safe
> to use pci_scan_root_bus() instead.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> CC: Tanmay Inamdar <tinamdar@apm.com>

Tanmay, any comments on this?

> ---
>  drivers/pci/host/pci-xgene.c |    3 +--
>  1 files changed, 1 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
> index ee082c0..87e3962 100644
> --- a/drivers/pci/host/pci-xgene.c
> +++ b/drivers/pci/host/pci-xgene.c
> @@ -499,12 +499,11 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	bus = pci_create_root_bus(&pdev->dev, 0,
> +	bus = pci_scan_root_bus(&pdev->dev, 0,
>  					&xgene_pcie_ops, port, &res);
>  	if (!bus)
>  		return -ENOMEM;
>  
> -	pci_scan_child_bus(bus);
>  	pci_assign_unassigned_bus_resources(bus);
>  	pci_bus_add_devices(bus);
>  
> -- 
> 1.7.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH Part1 v11 4/5] PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Bjorn Helgaas]

On Tue, Apr 28, 2015 at 03:01:38PM +0800, Yijing Wang wrote:
> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
> Now pci_scan_root_bus() == pci_create_root_bus() +
> pci_scan_child_bus() if busn resource is supplied.
> Xgene added the busn resource to resources list
> in of_pci_get_host_bridge_resources(). So it should be safe
> to use pci_scan_root_bus() instead.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> CC: Tanmay Inamdar <tinamdar@apm.com>

Tanmay, any comments on this?

> ---
>  drivers/pci/host/pci-xgene.c |    3 +--
>  1 files changed, 1 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
> index ee082c0..87e3962 100644
> --- a/drivers/pci/host/pci-xgene.c
> +++ b/drivers/pci/host/pci-xgene.c
> @@ -499,12 +499,11 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	bus = pci_create_root_bus(&pdev->dev, 0,
> +	bus = pci_scan_root_bus(&pdev->dev, 0,
>  					&xgene_pcie_ops, port, &res);
>  	if (!bus)
>  		return -ENOMEM;
>  
> -	pci_scan_child_bus(bus);
>  	pci_assign_unassigned_bus_resources(bus);
>  	pci_bus_add_devices(bus);
>  
> -- 
> 1.7.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH Part1 v11 4/5] PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Tanmay Inamdar]

On Wed, May 27, 2015 at 8:47 AM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> On Tue, Apr 28, 2015 at 03:01:38PM +0800, Yijing Wang wrote:
>> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
>> Now pci_scan_root_bus() == pci_create_root_bus() +
>> pci_scan_child_bus() if busn resource is supplied.
>> Xgene added the busn resource to resources list
>> in of_pci_get_host_bridge_resources(). So it should be safe
>> to use pci_scan_root_bus() instead.
>>
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> CC: Tanmay Inamdar <tinamdar@apm.com>
>
> Tanmay, any comments on this?
>

Looks good to me.

Acked-by: Tanmay Inamdar <tinamdar@apm.com>

>> ---
>>  drivers/pci/host/pci-xgene.c |    3 +--
>>  1 files changed, 1 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
>> index ee082c0..87e3962 100644
>> --- a/drivers/pci/host/pci-xgene.c
>> +++ b/drivers/pci/host/pci-xgene.c
>> @@ -499,12 +499,11 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
>>       if (ret)
>>               return ret;
>>
>> -     bus = pci_create_root_bus(&pdev->dev, 0,
>> +     bus = pci_scan_root_bus(&pdev->dev, 0,
>>                                       &xgene_pcie_ops, port, &res);
>>       if (!bus)
>>               return -ENOMEM;
>>
>> -     pci_scan_child_bus(bus);
>>       pci_assign_unassigned_bus_resources(bus);
>>       pci_bus_add_devices(bus);
>>
>> --
>> 1.7.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH Part1 v11 4/5] PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Tanmay Inamdar]

On Wed, May 27, 2015 at 8:47 AM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> On Tue, Apr 28, 2015 at 03:01:38PM +0800, Yijing Wang wrote:
>> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
>> Now pci_scan_root_bus() == pci_create_root_bus() +
>> pci_scan_child_bus() if busn resource is supplied.
>> Xgene added the busn resource to resources list
>> in of_pci_get_host_bridge_resources(). So it should be safe
>> to use pci_scan_root_bus() instead.
>>
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> CC: Tanmay Inamdar <tinamdar@apm.com>
>
> Tanmay, any comments on this?
>

Looks good to me.

Acked-by: Tanmay Inamdar <tinamdar@apm.com>

>> ---
>>  drivers/pci/host/pci-xgene.c |    3 +--
>>  1 files changed, 1 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
>> index ee082c0..87e3962 100644
>> --- a/drivers/pci/host/pci-xgene.c
>> +++ b/drivers/pci/host/pci-xgene.c
>> @@ -499,12 +499,11 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
>>       if (ret)
>>               return ret;
>>
>> -     bus = pci_create_root_bus(&pdev->dev, 0,
>> +     bus = pci_scan_root_bus(&pdev->dev, 0,
>>                                       &xgene_pcie_ops, port, &res);
>>       if (!bus)
>>               return -ENOMEM;
>>
>> -     pci_scan_child_bus(bus);
>>       pci_assign_unassigned_bus_resources(bus);
>>       pci_bus_add_devices(bus);
>>
>> --
>> 1.7.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH Part1 v11 4/5] PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Bjorn Helgaas]

[+cc Duc, Loc]

On Wed, May 27, 2015 at 10:21:40AM -0700, Tanmay Inamdar wrote:
> On Wed, May 27, 2015 at 8:47 AM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> > On Tue, Apr 28, 2015 at 03:01:38PM +0800, Yijing Wang wrote:
> >> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
> >> Now pci_scan_root_bus() == pci_create_root_bus() +
> >> pci_scan_child_bus() if busn resource is supplied.
> >> Xgene added the busn resource to resources list
> >> in of_pci_get_host_bridge_resources(). So it should be safe
> >> to use pci_scan_root_bus() instead.
> >>
> >> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> >> CC: Tanmay Inamdar <tinamdar@apm.com>
> >
> > Tanmay, any comments on this?
> >
> 
> Looks good to me.
> 
> Acked-by: Tanmay Inamdar <tinamdar@apm.com>

I had applied this, but dropped it because it conflicted with Duc's
MSI patch, which adds a call to xgene_pcie_msi_enable() between
pci_create_root_bus() and pci_scan_child_bus().

We should figure out a better way to do this, e.g., with
pci_host_bridge_ops, so we can use pci_scan_root_bus() on X-Gene.  But we
don't have that yet.

> >> ---
> >>  drivers/pci/host/pci-xgene.c |    3 +--
> >>  1 files changed, 1 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
> >> index ee082c0..87e3962 100644
> >> --- a/drivers/pci/host/pci-xgene.c
> >> +++ b/drivers/pci/host/pci-xgene.c
> >> @@ -499,12 +499,11 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
> >>       if (ret)
> >>               return ret;
> >>
> >> -     bus = pci_create_root_bus(&pdev->dev, 0,
> >> +     bus = pci_scan_root_bus(&pdev->dev, 0,
> >>                                       &xgene_pcie_ops, port, &res);
> >>       if (!bus)
> >>               return -ENOMEM;
> >>
> >> -     pci_scan_child_bus(bus);
> >>       pci_assign_unassigned_bus_resources(bus);
> >>       pci_bus_add_devices(bus);
> >>
> >> --
> >> 1.7.1
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH Part1 v11 4/5] PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Bjorn Helgaas]

[+cc Duc, Loc]

On Wed, May 27, 2015 at 10:21:40AM -0700, Tanmay Inamdar wrote:
> On Wed, May 27, 2015 at 8:47 AM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> > On Tue, Apr 28, 2015 at 03:01:38PM +0800, Yijing Wang wrote:
> >> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
> >> Now pci_scan_root_bus() == pci_create_root_bus() +
> >> pci_scan_child_bus() if busn resource is supplied.
> >> Xgene added the busn resource to resources list
> >> in of_pci_get_host_bridge_resources(). So it should be safe
> >> to use pci_scan_root_bus() instead.
> >>
> >> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> >> CC: Tanmay Inamdar <tinamdar@apm.com>
> >
> > Tanmay, any comments on this?
> >
> 
> Looks good to me.
> 
> Acked-by: Tanmay Inamdar <tinamdar@apm.com>

I had applied this, but dropped it because it conflicted with Duc's
MSI patch, which adds a call to xgene_pcie_msi_enable() between
pci_create_root_bus() and pci_scan_child_bus().

We should figure out a better way to do this, e.g., with
pci_host_bridge_ops, so we can use pci_scan_root_bus() on X-Gene.  But we
don't have that yet.

> >> ---
> >>  drivers/pci/host/pci-xgene.c |    3 +--
> >>  1 files changed, 1 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/pci/host/pci-xgene.c b/drivers/pci/host/pci-xgene.c
> >> index ee082c0..87e3962 100644
> >> --- a/drivers/pci/host/pci-xgene.c
> >> +++ b/drivers/pci/host/pci-xgene.c
> >> @@ -499,12 +499,11 @@ static int xgene_pcie_probe_bridge(struct platform_device *pdev)
> >>       if (ret)
> >>               return ret;
> >>
> >> -     bus = pci_create_root_bus(&pdev->dev, 0,
> >> +     bus = pci_scan_root_bus(&pdev->dev, 0,
> >>                                       &xgene_pcie_ops, port, &res);
> >>       if (!bus)
> >>               return -ENOMEM;
> >>
> >> -     pci_scan_child_bus(bus);
> >>       pci_assign_unassigned_bus_resources(bus);
> >>       pci_bus_add_devices(bus);
> >>
> >> --
> >> 1.7.1
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> >> the body of a message to majordomo at vger.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH Part1 v11 5/5] PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Yijing Wang]

Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
Now pci_scan_root_bus() == pci_create_root_bus() +
pci_scan_child_bus() if busn resource is supplied.
iproc added the busn resource to resources list
in of_pci_get_host_bridge_resources(). So it should be safe
to use pci_scan_root_bus() instead.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Ray Jui <rjui@broadcom.com>
---
 drivers/pci/host/pcie-iproc.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index 329e1b5..9622ebf 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -210,10 +210,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
 
 	pcie->sysdata.private_data = pcie;
 
-	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops,
+	bus = pci_scan_root_bus(pcie->dev, 0, &iproc_pcie_ops,
 				  &pcie->sysdata, pcie->resources);
 	if (!bus) {
-		dev_err(pcie->dev, "unable to create PCI root bus\n");
+		dev_err(pcie->dev, "unable to scan PCI root bus\n");
 		ret = -ENOMEM;
 		goto err_power_off_phy;
 	}
@@ -227,7 +227,6 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
 
 	iproc_pcie_enable(pcie);
 
-	pci_scan_child_bus(bus);
 	pci_assign_unassigned_bus_resources(bus);
 	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
 	pci_bus_add_devices(bus);
-- 
1.7.1

[PATCH Part1 v11 5/5] PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Yijing Wang]

Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
Now pci_scan_root_bus() == pci_create_root_bus() +
pci_scan_child_bus() if busn resource is supplied.
iproc added the busn resource to resources list
in of_pci_get_host_bridge_resources(). So it should be safe
to use pci_scan_root_bus() instead.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Ray Jui <rjui@broadcom.com>
---
 drivers/pci/host/pcie-iproc.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
index 329e1b5..9622ebf 100644
--- a/drivers/pci/host/pcie-iproc.c
+++ b/drivers/pci/host/pcie-iproc.c
@@ -210,10 +210,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
 
 	pcie->sysdata.private_data = pcie;
 
-	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops,
+	bus = pci_scan_root_bus(pcie->dev, 0, &iproc_pcie_ops,
 				  &pcie->sysdata, pcie->resources);
 	if (!bus) {
-		dev_err(pcie->dev, "unable to create PCI root bus\n");
+		dev_err(pcie->dev, "unable to scan PCI root bus\n");
 		ret = -ENOMEM;
 		goto err_power_off_phy;
 	}
@@ -227,7 +227,6 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
 
 	iproc_pcie_enable(pcie);
 
-	pci_scan_child_bus(bus);
 	pci_assign_unassigned_bus_resources(bus);
 	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
 	pci_bus_add_devices(bus);
-- 
1.7.1

Re: [PATCH Part1 v11 5/5] PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Ray Jui]

Hi Yijing,

On 4/28/2015 12:01 AM, Yijing Wang wrote:
> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
> Now pci_scan_root_bus() == pci_create_root_bus() +
> pci_scan_child_bus() if busn resource is supplied.
> iproc added the busn resource to resources list
> in of_pci_get_host_bridge_resources(). So it should be safe
> to use pci_scan_root_bus() instead.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> CC: Ray Jui <rjui@broadcom.com>
> ---
>  drivers/pci/host/pcie-iproc.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
> index 329e1b5..9622ebf 100644
> --- a/drivers/pci/host/pcie-iproc.c
> +++ b/drivers/pci/host/pcie-iproc.c
> @@ -210,10 +210,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
>  
>  	pcie->sysdata.private_data = pcie;
>  
> -	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops,
> +	bus = pci_scan_root_bus(pcie->dev, 0, &iproc_pcie_ops,
>  				  &pcie->sysdata, pcie->resources);
>  	if (!bus) {
> -		dev_err(pcie->dev, "unable to create PCI root bus\n");
> +		dev_err(pcie->dev, "unable to scan PCI root bus\n");
>  		ret = -ENOMEM;
>  		goto err_power_off_phy;
>  	}

iproc_pcie_check_link is called here by using the 'bus' structure
returned from pci_create_root_bus. In iproc_pcie_check_link, we
configure root bus class to PCI_CLASS_BRIDGE_PCI and validate to ensure
a stable link between RC and EP can be detected.

> @@ -227,7 +227,6 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
>  
>  	iproc_pcie_enable(pcie);

Here we enable INTx support for our RC controller.

>  
> -	pci_scan_child_bus(bus);

Here, if pci_scan_child_bus is moved to before iproc_pcie_check_link, I
don't think it would work (although I have not tested this).

An alternative is to use a dummy bus structure to feed into
iproc_pcie_check_link, and call iproc_pcie_check_link and
iproc_pcie_enable before pci_scan_root_bus. But the reason I put the
link check code in between pci_create_root_bus and pci_scan_child_bus
was to avoid using a dummy bus structure, :)

>  	pci_assign_unassigned_bus_resources(bus);
>  	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
>  	pci_bus_add_devices(bus);
> 

Thanks,

Ray

[PATCH Part1 v11 5/5] PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Ray Jui]

Hi Yijing,

On 4/28/2015 12:01 AM, Yijing Wang wrote:
> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
> Now pci_scan_root_bus() == pci_create_root_bus() +
> pci_scan_child_bus() if busn resource is supplied.
> iproc added the busn resource to resources list
> in of_pci_get_host_bridge_resources(). So it should be safe
> to use pci_scan_root_bus() instead.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> CC: Ray Jui <rjui@broadcom.com>
> ---
>  drivers/pci/host/pcie-iproc.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
> index 329e1b5..9622ebf 100644
> --- a/drivers/pci/host/pcie-iproc.c
> +++ b/drivers/pci/host/pcie-iproc.c
> @@ -210,10 +210,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
>  
>  	pcie->sysdata.private_data = pcie;
>  
> -	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops,
> +	bus = pci_scan_root_bus(pcie->dev, 0, &iproc_pcie_ops,
>  				  &pcie->sysdata, pcie->resources);
>  	if (!bus) {
> -		dev_err(pcie->dev, "unable to create PCI root bus\n");
> +		dev_err(pcie->dev, "unable to scan PCI root bus\n");
>  		ret = -ENOMEM;
>  		goto err_power_off_phy;
>  	}

iproc_pcie_check_link is called here by using the 'bus' structure
returned from pci_create_root_bus. In iproc_pcie_check_link, we
configure root bus class to PCI_CLASS_BRIDGE_PCI and validate to ensure
a stable link between RC and EP can be detected.

> @@ -227,7 +227,6 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
>  
>  	iproc_pcie_enable(pcie);

Here we enable INTx support for our RC controller.

>  
> -	pci_scan_child_bus(bus);

Here, if pci_scan_child_bus is moved to before iproc_pcie_check_link, I
don't think it would work (although I have not tested this).

An alternative is to use a dummy bus structure to feed into
iproc_pcie_check_link, and call iproc_pcie_check_link and
iproc_pcie_enable before pci_scan_root_bus. But the reason I put the
link check code in between pci_create_root_bus and pci_scan_child_bus
was to avoid using a dummy bus structure, :)

>  	pci_assign_unassigned_bus_resources(bus);
>  	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
>  	pci_bus_add_devices(bus);
> 

Thanks,

Ray

Re: [PATCH Part1 v11 5/5] PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Yijing Wang]

>> @@ -210,10 +210,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
>>  
>>  	pcie->sysdata.private_data = pcie;
>>  
>> -	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops,
>> +	bus = pci_scan_root_bus(pcie->dev, 0, &iproc_pcie_ops,
>>  				  &pcie->sysdata, pcie->resources);
>>  	if (!bus) {
>> -		dev_err(pcie->dev, "unable to create PCI root bus\n");
>> +		dev_err(pcie->dev, "unable to scan PCI root bus\n");
>>  		ret = -ENOMEM;
>>  		goto err_power_off_phy;
>>  	}
> 
> iproc_pcie_check_link is called here by using the 'bus' structure
> returned from pci_create_root_bus. In iproc_pcie_check_link, we
> configure root bus class to PCI_CLASS_BRIDGE_PCI and validate to ensure
> a stable link between RC and EP can be detected.

Oh, I got it. Thanks for your explanation.

> 
>> @@ -227,7 +227,6 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
>>  
>>  	iproc_pcie_enable(pcie);
> 
> Here we enable INTx support for our RC controller.
> 
>>  
>> -	pci_scan_child_bus(bus);
> 
> Here, if pci_scan_child_bus is moved to before iproc_pcie_check_link, I
> don't think it would work (although I have not tested this).
> 
> An alternative is to use a dummy bus structure to feed into
> iproc_pcie_check_link, and call iproc_pcie_check_link and
> iproc_pcie_enable before pci_scan_root_bus. But the reason I put the
> link check code in between pci_create_root_bus and pci_scan_child_bus
> was to avoid using a dummy bus structure, :)

Maybe we could refactor this by add a new pci_host_bridge_ops in the later patch.

> 
>>  	pci_assign_unassigned_bus_resources(bus);
>>  	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
>>  	pci_bus_add_devices(bus);
>>
> 
> Thanks,
> 
> Ray
> 
> .
> 


-- 
Thanks!
Yijing

[PATCH Part1 v11 5/5] PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Yijing Wang]

>> @@ -210,10 +210,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
>>  
>>  	pcie->sysdata.private_data = pcie;
>>  
>> -	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops,
>> +	bus = pci_scan_root_bus(pcie->dev, 0, &iproc_pcie_ops,
>>  				  &pcie->sysdata, pcie->resources);
>>  	if (!bus) {
>> -		dev_err(pcie->dev, "unable to create PCI root bus\n");
>> +		dev_err(pcie->dev, "unable to scan PCI root bus\n");
>>  		ret = -ENOMEM;
>>  		goto err_power_off_phy;
>>  	}
> 
> iproc_pcie_check_link is called here by using the 'bus' structure
> returned from pci_create_root_bus. In iproc_pcie_check_link, we
> configure root bus class to PCI_CLASS_BRIDGE_PCI and validate to ensure
> a stable link between RC and EP can be detected.

Oh, I got it. Thanks for your explanation.

> 
>> @@ -227,7 +227,6 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
>>  
>>  	iproc_pcie_enable(pcie);
> 
> Here we enable INTx support for our RC controller.
> 
>>  
>> -	pci_scan_child_bus(bus);
> 
> Here, if pci_scan_child_bus is moved to before iproc_pcie_check_link, I
> don't think it would work (although I have not tested this).
> 
> An alternative is to use a dummy bus structure to feed into
> iproc_pcie_check_link, and call iproc_pcie_check_link and
> iproc_pcie_enable before pci_scan_root_bus. But the reason I put the
> link check code in between pci_create_root_bus and pci_scan_child_bus
> was to avoid using a dummy bus structure, :)

Maybe we could refactor this by add a new pci_host_bridge_ops in the later patch.

> 
>>  	pci_assign_unassigned_bus_resources(bus);
>>  	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
>>  	pci_bus_add_devices(bus);
>>
> 
> Thanks,
> 
> Ray
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH Part1 v11 5/5] PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Yijing Wang]

Hi Bjorn, please ignore this patch, it's not correct. I prefer to refactor it by add a new pci_host_bridge_ops in later patch.
What do you think about the prior four patches ? I hope they could be merged first, they are independent.

Thanks!
Yijing.

On 2015/4/28 15:01, Yijing Wang wrote:
> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
> Now pci_scan_root_bus() == pci_create_root_bus() +
> pci_scan_child_bus() if busn resource is supplied.
> iproc added the busn resource to resources list
> in of_pci_get_host_bridge_resources(). So it should be safe
> to use pci_scan_root_bus() instead.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> CC: Ray Jui <rjui@broadcom.com>
> ---
>  drivers/pci/host/pcie-iproc.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
> index 329e1b5..9622ebf 100644
> --- a/drivers/pci/host/pcie-iproc.c
> +++ b/drivers/pci/host/pcie-iproc.c
> @@ -210,10 +210,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
>  
>  	pcie->sysdata.private_data = pcie;
>  
> -	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops,
> +	bus = pci_scan_root_bus(pcie->dev, 0, &iproc_pcie_ops,
>  				  &pcie->sysdata, pcie->resources);
>  	if (!bus) {
> -		dev_err(pcie->dev, "unable to create PCI root bus\n");
> +		dev_err(pcie->dev, "unable to scan PCI root bus\n");
>  		ret = -ENOMEM;
>  		goto err_power_off_phy;
>  	}
> @@ -227,7 +227,6 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
>  
>  	iproc_pcie_enable(pcie);
>  
> -	pci_scan_child_bus(bus);
>  	pci_assign_unassigned_bus_resources(bus);
>  	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
>  	pci_bus_add_devices(bus);
> 


-- 
Thanks!
Yijing

[PATCH Part1 v11 5/5] PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()

[Yijing Wang]

Hi Bjorn, please ignore this patch, it's not correct. I prefer to refactor it by add a new pci_host_bridge_ops in later patch.
What do you think about the prior four patches ? I hope they could be merged first, they are independent.

Thanks!
Yijing.

On 2015/4/28 15:01, Yijing Wang wrote:
> Pci_bus_add_devices() was ripped out of pci_scan_root_bus().
> Now pci_scan_root_bus() == pci_create_root_bus() +
> pci_scan_child_bus() if busn resource is supplied.
> iproc added the busn resource to resources list
> in of_pci_get_host_bridge_resources(). So it should be safe
> to use pci_scan_root_bus() instead.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> CC: Ray Jui <rjui@broadcom.com>
> ---
>  drivers/pci/host/pcie-iproc.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
> index 329e1b5..9622ebf 100644
> --- a/drivers/pci/host/pcie-iproc.c
> +++ b/drivers/pci/host/pcie-iproc.c
> @@ -210,10 +210,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
>  
>  	pcie->sysdata.private_data = pcie;
>  
> -	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops,
> +	bus = pci_scan_root_bus(pcie->dev, 0, &iproc_pcie_ops,
>  				  &pcie->sysdata, pcie->resources);
>  	if (!bus) {
> -		dev_err(pcie->dev, "unable to create PCI root bus\n");
> +		dev_err(pcie->dev, "unable to scan PCI root bus\n");
>  		ret = -ENOMEM;
>  		goto err_power_off_phy;
>  	}
> @@ -227,7 +227,6 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
>  
>  	iproc_pcie_enable(pcie);
>  
> -	pci_scan_child_bus(bus);
>  	pci_assign_unassigned_bus_resources(bus);
>  	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
>  	pci_bus_add_devices(bus);
> 


-- 
Thanks!
Yijing

Re: [PATCH Part1 v11 0/5] Some cleanup for pcie host drivers

[Yijing Wang]

Hi Bjorn, sorry to bother you, do you have time to look at these patches ?

On 2015/4/28 15:01, Yijing Wang wrote:
> These patches are split out from patchset(patch 5 is new)
> "Refine PCI scan interfaces and make generic pci host bridge".
> They are independent of the series, pci_bus_add_devices()
> has been ripped out from pci_scan_root_bus(), so we could
> use pci_scan_root_bus() instead of pci_create_root_bus() + 
> pci_scan_child_bus() for simplicity. Also this is the preparation
> for the series.
> 
> Yijing Wang (5):
>   PCI: mvebu: Use pci_common_init_dev() to simplify code
>   PCI: tegra: Remove redundant tegra_pcie_scan_bus()
>   PCI: designware: Use pci_scan_root_bus() for simplicity
>   PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()
>   PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()
> 
>  drivers/pci/host/pci-mvebu.c       |   18 +-----------------
>  drivers/pci/host/pci-tegra.c       |   16 ----------------
>  drivers/pci/host/pci-xgene.c       |    3 +--
>  drivers/pci/host/pcie-designware.c |    4 +---
>  drivers/pci/host/pcie-iproc.c      |    5 ++---
>  5 files changed, 5 insertions(+), 41 deletions(-)
> 
> 
> .
> 


-- 
Thanks!
Yijing

[PATCH Part1 v11 0/5] Some cleanup for pcie host drivers

[Yijing Wang]

Hi Bjorn, sorry to bother you, do you have time to look at these patches ?

On 2015/4/28 15:01, Yijing Wang wrote:
> These patches are split out from patchset(patch 5 is new)
> "Refine PCI scan interfaces and make generic pci host bridge".
> They are independent of the series, pci_bus_add_devices()
> has been ripped out from pci_scan_root_bus(), so we could
> use pci_scan_root_bus() instead of pci_create_root_bus() + 
> pci_scan_child_bus() for simplicity. Also this is the preparation
> for the series.
> 
> Yijing Wang (5):
>   PCI: mvebu: Use pci_common_init_dev() to simplify code
>   PCI: tegra: Remove redundant tegra_pcie_scan_bus()
>   PCI: designware: Use pci_scan_root_bus() for simplicity
>   PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()
>   PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()
> 
>  drivers/pci/host/pci-mvebu.c       |   18 +-----------------
>  drivers/pci/host/pci-tegra.c       |   16 ----------------
>  drivers/pci/host/pci-xgene.c       |    3 +--
>  drivers/pci/host/pcie-designware.c |    4 +---
>  drivers/pci/host/pcie-iproc.c      |    5 ++---
>  5 files changed, 5 insertions(+), 41 deletions(-)
> 
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH Part1 v11 0/5] Some cleanup for pcie host drivers

[Bjorn Helgaas]

On Tue, Apr 28, 2015 at 03:01:34PM +0800, Yijing Wang wrote:
> These patches are split out from patchset(patch 5 is new)
> "Refine PCI scan interfaces and make generic pci host bridge".
> They are independent of the series, pci_bus_add_devices()
> has been ripped out from pci_scan_root_bus(), so we could
> use pci_scan_root_bus() instead of pci_create_root_bus() + 
> pci_scan_child_bus() for simplicity. Also this is the preparation
> for the series.
> 
> Yijing Wang (5):
>   PCI: mvebu: Use pci_common_init_dev() to simplify code
>   PCI: tegra: Remove redundant tegra_pcie_scan_bus()
>   PCI: designware: Use pci_scan_root_bus() for simplicity
>   PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()

I applied the four patches above to pci/enumeration for v4.2, thanks.

>   PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()
> 
>  drivers/pci/host/pci-mvebu.c       |   18 +-----------------
>  drivers/pci/host/pci-tegra.c       |   16 ----------------
>  drivers/pci/host/pci-xgene.c       |    3 +--
>  drivers/pci/host/pcie-designware.c |    4 +---
>  drivers/pci/host/pcie-iproc.c      |    5 ++---
>  5 files changed, 5 insertions(+), 41 deletions(-)
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH Part1 v11 0/5] Some cleanup for pcie host drivers

[Bjorn Helgaas]

On Tue, Apr 28, 2015 at 03:01:34PM +0800, Yijing Wang wrote:
> These patches are split out from patchset(patch 5 is new)
> "Refine PCI scan interfaces and make generic pci host bridge".
> They are independent of the series, pci_bus_add_devices()
> has been ripped out from pci_scan_root_bus(), so we could
> use pci_scan_root_bus() instead of pci_create_root_bus() + 
> pci_scan_child_bus() for simplicity. Also this is the preparation
> for the series.
> 
> Yijing Wang (5):
>   PCI: mvebu: Use pci_common_init_dev() to simplify code
>   PCI: tegra: Remove redundant tegra_pcie_scan_bus()
>   PCI: designware: Use pci_scan_root_bus() for simplicity
>   PCI: xgene: Use pci_scan_root_bus() instead of pci_create_root_bus()

I applied the four patches above to pci/enumeration for v4.2, thanks.

>   PCI: iproc: Use pci_scan_root_bus() instead of pci_create_root_bus()
> 
>  drivers/pci/host/pci-mvebu.c       |   18 +-----------------
>  drivers/pci/host/pci-tegra.c       |   16 ----------------
>  drivers/pci/host/pci-xgene.c       |    3 +--
>  drivers/pci/host/pcie-designware.c |    4 +---
>  drivers/pci/host/pcie-iproc.c      |    5 ++---
>  5 files changed, 5 insertions(+), 41 deletions(-)
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html