* [Buildroot] [git commit] gcc: switch to gcc 4.9 as the default version
@ 2015-06-22 22:19 Peter Korsgaard
2015-06-23 7:46 ` Arnout Vandecappelle
0 siblings, 1 reply; 4+ messages in thread
From: Peter Korsgaard @ 2015-06-22 22:19 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=07536bbb3df3fb065b8c6a31cf4519c6a0054ad7
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Now that we have added gcc 5.1, it's time to make gcc 4.9 the default
version used in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
---
package/gcc/Config.in.host | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/package/gcc/Config.in.host b/package/gcc/Config.in.host
index 578e24f..51f04f5 100644
--- a/package/gcc/Config.in.host
+++ b/package/gcc/Config.in.host
@@ -9,8 +9,7 @@ config BR2_GCC_SUPPORTS_GRAPHITE
choice
prompt "GCC compiler Version"
default BR2_GCC_VERSION_4_8_ARC if BR2_arc
- default BR2_GCC_VERSION_4_9_X if BR2_microblaze || BR2_powerpc64le
- default BR2_GCC_VERSION_4_8_X
+ default BR2_GCC_VERSION_4_9_X
help
Select the version of gcc you wish to use.
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [Buildroot] [git commit] gcc: switch to gcc 4.9 as the default version
2015-06-22 22:19 [Buildroot] [git commit] gcc: switch to gcc 4.9 as the default version Peter Korsgaard
@ 2015-06-23 7:46 ` Arnout Vandecappelle
2015-06-23 16:02 ` Thomas Petazzoni
0 siblings, 1 reply; 4+ messages in thread
From: Arnout Vandecappelle @ 2015-06-23 7:46 UTC (permalink / raw)
To: buildroot
On 06/23/15 00:19, Peter Korsgaard wrote:
> commit: http://git.buildroot.net/buildroot/commit/?id=07536bbb3df3fb065b8c6a31cf4519c6a0054ad7
> branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
>
> Now that we have added gcc 5.1, it's time to make gcc 4.9 the default
> version used in Buildroot.
I think we should again update our autobuilder toolchains in this case, to make
sure we actually test the thing that we set as default.
[I have bad internet connection now so I didn't check if perhaps the autobuilder
toolchains have already been updated. If so, sorry for the noise.]
Regards,
Arnout
[snip]
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] [git commit] gcc: switch to gcc 4.9 as the default version
2015-06-23 7:46 ` Arnout Vandecappelle
@ 2015-06-23 16:02 ` Thomas Petazzoni
2015-06-23 19:28 ` Peter Korsgaard
0 siblings, 1 reply; 4+ messages in thread
From: Thomas Petazzoni @ 2015-06-23 16:02 UTC (permalink / raw)
To: buildroot
Dear Arnout Vandecappelle,
On Tue, 23 Jun 2015 09:46:10 +0200, Arnout Vandecappelle wrote:
> I think we should again update our autobuilder toolchains in this case, to make
> sure we actually test the thing that we set as default.
>
> [I have bad internet connection now so I didn't check if perhaps the autobuilder
> toolchains have already been updated. If so, sorry for the noise.]
We have a few internal toolchain configurations in the autobuilders:
http://autobuild.buildroot.org/toolchains/configs/br-arc-full-internal.config
http://autobuild.buildroot.org/toolchains/configs/br-arm-internal-full.config
http://autobuild.buildroot.org/toolchains/configs/br-microblazeel-full-internal.config
http://autobuild.buildroot.org/toolchains/configs/br-powerpc-internal-full.config
http://autobuild.buildroot.org/toolchains/configs/br-xtensa-full-internal.config
These are always using the default gcc version. However, it is true
that all the other Buildroot toolchain configuration use pre-built
external toolchains, that are stuck to whatever was the default back
when 2015.05, except the following toolchains that already use gcc 4.9:
br-aarch64-glibc.config:BR2_GCC_VERSION_4_9_X=y
br-arm-cortex-a9-glibc.config:BR2_GCC_VERSION_4_9_X=y
br-arm-cortex-a9-musl.config:BR2_GCC_VERSION_4_9_X=y
But I can certainly trigger a rebuild of the toolchains with the most
recent Buildroot, using gcc 4.9 as the default, and having one
toolchain using gcc 5.1 to catch issues. Should I do this?
Thanks,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] [git commit] gcc: switch to gcc 4.9 as the default version
2015-06-23 16:02 ` Thomas Petazzoni
@ 2015-06-23 19:28 ` Peter Korsgaard
0 siblings, 0 replies; 4+ messages in thread
From: Peter Korsgaard @ 2015-06-23 19:28 UTC (permalink / raw)
To: buildroot
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
Hi,
> These are always using the default gcc version. However, it is true
> that all the other Buildroot toolchain configuration use pre-built
> external toolchains, that are stuck to whatever was the default back
> when 2015.05, except the following toolchains that already use gcc 4.9:
> br-aarch64-glibc.config:BR2_GCC_VERSION_4_9_X=y
> br-arm-cortex-a9-glibc.config:BR2_GCC_VERSION_4_9_X=y
> br-arm-cortex-a9-musl.config:BR2_GCC_VERSION_4_9_X=y
> But I can certainly trigger a rebuild of the toolchains with the most
> recent Buildroot, using gcc 4.9 as the default, and having one
> toolchain using gcc 5.1 to catch issues. Should I do this?
I think it would be interesting to do so, yes.
Thanks!
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-06-23 19:28 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-22 22:19 [Buildroot] [git commit] gcc: switch to gcc 4.9 as the default version Peter Korsgaard
2015-06-23 7:46 ` Arnout Vandecappelle
2015-06-23 16:02 ` Thomas Petazzoni
2015-06-23 19:28 ` Peter Korsgaard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.