[PATCH v5 0/6] add device tree support for mxc rtc

[PATCH v5 0/6] add device tree support for mxc rtc

[Philippe Reynes]

This serie add the device tree support for the mxc rtc driver.
To do this, three steps are required :
- define two rtc clocks for imx31 and imx35
- enhance mxc rtc driver to use two clocks (ref and ipg)
- add device tree support to mxc rtc driver

Changelog:
v5: (thanks Shawn Guo, Rob Herring and Alexandre Belloni)
- rename rtc clock to ref
- fix typo in binding documentation
- enable rtc by default on imx27
v4: (thanks Alexandre Belloni)
- add prepare_clock for rtc clock
- split apf27: dt: enable support in two patches
v3: (thanks Fabio Estevam)
- fix typo in imx35 clock comment
v2: (thanks Shawn Guo and Alexandre Belloni)
- add a second clock to imx35
- split the add of clock in a separate patches
- split the dt documentation in a separate patch

Philippe Reynes (6):
  imx31: add a second rtc clock
  imx35: define two clocks for rtc
  rtc: mxc: use a second rtc clock
  dt-binding: document the binding for mxc rtc
  rtc: mxc: add support of device tree
  imx27: dt: add support of internal rtc

 Documentation/devicetree/bindings/rtc/rtc-mxc.txt |   26 +++++++++
 arch/arm/boot/dts/imx27.dtsi                      |    9 +++
 drivers/clk/imx/clk-imx31.c                       |    3 +-
 drivers/clk/imx/clk-imx35.c                       |    6 ++-
 drivers/rtc/rtc-mxc.c                             |   60 ++++++++++++++++-----
 5 files changed, 88 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt

-- 
1.7.4.4

[rtc-linux] [PATCH v5 0/6] add device tree support for mxc rtc

[Philippe Reynes]

This serie add the device tree support for the mxc rtc driver.
To do this, three steps are required :
- define two rtc clocks for imx31 and imx35
- enhance mxc rtc driver to use two clocks (ref and ipg)
- add device tree support to mxc rtc driver

Changelog:
v5: (thanks Shawn Guo, Rob Herring and Alexandre Belloni)
- rename rtc clock to ref
- fix typo in binding documentation
- enable rtc by default on imx27
v4: (thanks Alexandre Belloni)
- add prepare_clock for rtc clock
- split apf27: dt: enable support in two patches
v3: (thanks Fabio Estevam)
- fix typo in imx35 clock comment
v2: (thanks Shawn Guo and Alexandre Belloni)
- add a second clock to imx35
- split the add of clock in a separate patches
- split the dt documentation in a separate patch

Philippe Reynes (6):
  imx31: add a second rtc clock
  imx35: define two clocks for rtc
  rtc: mxc: use a second rtc clock
  dt-binding: document the binding for mxc rtc
  rtc: mxc: add support of device tree
  imx27: dt: add support of internal rtc

 Documentation/devicetree/bindings/rtc/rtc-mxc.txt |   26 +++++++++
 arch/arm/boot/dts/imx27.dtsi                      |    9 +++
 drivers/clk/imx/clk-imx31.c                       |    3 +-
 drivers/clk/imx/clk-imx35.c                       |    6 ++-
 drivers/rtc/rtc-mxc.c                             |   60 ++++++++++++++++-----
 5 files changed, 88 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt

-- 
1.7.4.4

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v5 0/6] add device tree support for mxc rtc

[Philippe Reynes]

This serie add the device tree support for the mxc rtc driver.
To do this, three steps are required :
- define two rtc clocks for imx31 and imx35
- enhance mxc rtc driver to use two clocks (ref and ipg)
- add device tree support to mxc rtc driver

Changelog:
v5: (thanks Shawn Guo, Rob Herring and Alexandre Belloni)
- rename rtc clock to ref
- fix typo in binding documentation
- enable rtc by default on imx27
v4: (thanks Alexandre Belloni)
- add prepare_clock for rtc clock
- split apf27: dt: enable support in two patches
v3: (thanks Fabio Estevam)
- fix typo in imx35 clock comment
v2: (thanks Shawn Guo and Alexandre Belloni)
- add a second clock to imx35
- split the add of clock in a separate patches
- split the dt documentation in a separate patch

Philippe Reynes (6):
  imx31: add a second rtc clock
  imx35: define two clocks for rtc
  rtc: mxc: use a second rtc clock
  dt-binding: document the binding for mxc rtc
  rtc: mxc: add support of device tree
  imx27: dt: add support of internal rtc

 Documentation/devicetree/bindings/rtc/rtc-mxc.txt |   26 +++++++++
 arch/arm/boot/dts/imx27.dtsi                      |    9 +++
 drivers/clk/imx/clk-imx31.c                       |    3 +-
 drivers/clk/imx/clk-imx35.c                       |    6 ++-
 drivers/rtc/rtc-mxc.c                             |   60 ++++++++++++++++-----
 5 files changed, 88 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt

-- 
1.7.4.4

[PATCH v5 1/6] imx31: add a second rtc clock

[Philippe Reynes]

The mxc rtc driver needs two clock.
It was defined only one clock, so we
define the second clock.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/clk/imx/clk-imx31.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/clk/imx/clk-imx31.c b/drivers/clk/imx/clk-imx31.c
index fe66c40..1f83834 100644
--- a/drivers/clk/imx/clk-imx31.c
+++ b/drivers/clk/imx/clk-imx31.c
@@ -147,7 +147,8 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
 	clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc");
+	clk_register_clkdev(clk[ckil], "ref", "imx21-rtc");
+	clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc");
 	clk_register_clkdev(clk[epit1_gate], "epit", NULL);
 	clk_register_clkdev(clk[epit2_gate], "epit", NULL);
 	clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0");
-- 
1.7.4.4

[rtc-linux] [PATCH v5 1/6] imx31: add a second rtc clock

[Philippe Reynes]

The mxc rtc driver needs two clock.
It was defined only one clock, so we
define the second clock.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/clk/imx/clk-imx31.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/clk/imx/clk-imx31.c b/drivers/clk/imx/clk-imx31.c
index fe66c40..1f83834 100644
--- a/drivers/clk/imx/clk-imx31.c
+++ b/drivers/clk/imx/clk-imx31.c
@@ -147,7 +147,8 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
 	clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc");
+	clk_register_clkdev(clk[ckil], "ref", "imx21-rtc");
+	clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc");
 	clk_register_clkdev(clk[epit1_gate], "epit", NULL);
 	clk_register_clkdev(clk[epit2_gate], "epit", NULL);
 	clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0");
-- 
1.7.4.4

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v5 1/6] imx31: add a second rtc clock

[Philippe Reynes]

The mxc rtc driver needs two clock.
It was defined only one clock, so we
define the second clock.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/clk/imx/clk-imx31.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/clk/imx/clk-imx31.c b/drivers/clk/imx/clk-imx31.c
index fe66c40..1f83834 100644
--- a/drivers/clk/imx/clk-imx31.c
+++ b/drivers/clk/imx/clk-imx31.c
@@ -147,7 +147,8 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
 	clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc");
+	clk_register_clkdev(clk[ckil], "ref", "imx21-rtc");
+	clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc");
 	clk_register_clkdev(clk[epit1_gate], "epit", NULL);
 	clk_register_clkdev(clk[epit2_gate], "epit", NULL);
 	clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0");
-- 
1.7.4.4

[PATCH v5 2/6] imx35: define two clocks for rtc

[Philippe Reynes]

The imx35 don't define clocks for rtc.
This patch add two clocks, as needed
by the mxc rtc driver.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/clk/imx/clk-imx35.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/drivers/clk/imx/clk-imx35.c b/drivers/clk/imx/clk-imx35.c
index 69138ba..8623cd4 100644
--- a/drivers/clk/imx/clk-imx35.c
+++ b/drivers/clk/imx/clk-imx35.c
@@ -66,7 +66,7 @@ static const char *std_sel[] = {"ppll", "arm"};
 static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
 
 enum mx35_clks {
-	ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
+	ckih, ckil, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
 	arm_per_div, ahb_per_div, ipg_per, uart_sel, uart_div, esdhc_sel,
 	esdhc1_div, esdhc2_div, esdhc3_div, spdif_sel, spdif_div_pre,
 	spdif_div_post, ssi_sel, ssi1_div_pre, ssi1_div_post, ssi2_div_pre,
@@ -107,6 +107,7 @@ int __init mx35_clocks_init(void)
 	}
 
 	clk[ckih] = imx_clk_fixed("ckih", 24000000);
+	clk[ckil] = imx_clk_fixed("ckih", 32768);
 	clk[mpll] = imx_clk_pllv1(IMX_PLLV1_IMX35, "mpll", "ckih", base + MX35_CCM_MPCTL);
 	clk[ppll] = imx_clk_pllv1(IMX_PLLV1_IMX35, "ppll", "ckih", base + MX35_CCM_PPCTL);
 
@@ -258,6 +259,9 @@ int __init mx35_clocks_init(void)
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
 	clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+	/* i.mx35 has the i.mx21 type rtc */
+	clk_register_clkdev(clk[ckil], "ref", "imx21-rtc");
+	clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
 	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0");
-- 
1.7.4.4

[rtc-linux] [PATCH v5 2/6] imx35: define two clocks for rtc

[Philippe Reynes]

The imx35 don't define clocks for rtc.
This patch add two clocks, as needed
by the mxc rtc driver.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/clk/imx/clk-imx35.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/drivers/clk/imx/clk-imx35.c b/drivers/clk/imx/clk-imx35.c
index 69138ba..8623cd4 100644
--- a/drivers/clk/imx/clk-imx35.c
+++ b/drivers/clk/imx/clk-imx35.c
@@ -66,7 +66,7 @@ static const char *std_sel[] = {"ppll", "arm"};
 static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
 
 enum mx35_clks {
-	ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
+	ckih, ckil, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
 	arm_per_div, ahb_per_div, ipg_per, uart_sel, uart_div, esdhc_sel,
 	esdhc1_div, esdhc2_div, esdhc3_div, spdif_sel, spdif_div_pre,
 	spdif_div_post, ssi_sel, ssi1_div_pre, ssi1_div_post, ssi2_div_pre,
@@ -107,6 +107,7 @@ int __init mx35_clocks_init(void)
 	}
 
 	clk[ckih] = imx_clk_fixed("ckih", 24000000);
+	clk[ckil] = imx_clk_fixed("ckih", 32768);
 	clk[mpll] = imx_clk_pllv1(IMX_PLLV1_IMX35, "mpll", "ckih", base + MX35_CCM_MPCTL);
 	clk[ppll] = imx_clk_pllv1(IMX_PLLV1_IMX35, "ppll", "ckih", base + MX35_CCM_PPCTL);
 
@@ -258,6 +259,9 @@ int __init mx35_clocks_init(void)
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
 	clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+	/* i.mx35 has the i.mx21 type rtc */
+	clk_register_clkdev(clk[ckil], "ref", "imx21-rtc");
+	clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
 	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0");
-- 
1.7.4.4

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v5 2/6] imx35: define two clocks for rtc

[Philippe Reynes]

The imx35 don't define clocks for rtc.
This patch add two clocks, as needed
by the mxc rtc driver.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/clk/imx/clk-imx35.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/drivers/clk/imx/clk-imx35.c b/drivers/clk/imx/clk-imx35.c
index 69138ba..8623cd4 100644
--- a/drivers/clk/imx/clk-imx35.c
+++ b/drivers/clk/imx/clk-imx35.c
@@ -66,7 +66,7 @@ static const char *std_sel[] = {"ppll", "arm"};
 static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
 
 enum mx35_clks {
-	ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
+	ckih, ckil, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
 	arm_per_div, ahb_per_div, ipg_per, uart_sel, uart_div, esdhc_sel,
 	esdhc1_div, esdhc2_div, esdhc3_div, spdif_sel, spdif_div_pre,
 	spdif_div_post, ssi_sel, ssi1_div_pre, ssi1_div_post, ssi2_div_pre,
@@ -107,6 +107,7 @@ int __init mx35_clocks_init(void)
 	}
 
 	clk[ckih] = imx_clk_fixed("ckih", 24000000);
+	clk[ckil] = imx_clk_fixed("ckih", 32768);
 	clk[mpll] = imx_clk_pllv1(IMX_PLLV1_IMX35, "mpll", "ckih", base + MX35_CCM_MPCTL);
 	clk[ppll] = imx_clk_pllv1(IMX_PLLV1_IMX35, "ppll", "ckih", base + MX35_CCM_PPCTL);
 
@@ -258,6 +259,9 @@ int __init mx35_clocks_init(void)
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
 	clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+	/* i.mx35 has the i.mx21 type rtc */
+	clk_register_clkdev(clk[ckil], "ref", "imx21-rtc");
+	clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
 	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0");
-- 
1.7.4.4

[PATCH v5 3/6] rtc: mxc: use a second rtc clock

[Philippe Reynes]

The mxc RTC needs two clocks, one for the input
reference, and one for the IP. But this driver
was only using one clock (for the reference).
This patch add the second clock (for the IP).

Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/rtc/rtc-mxc.c |   41 ++++++++++++++++++++++++++++-------------
 1 files changed, 28 insertions(+), 13 deletions(-)

diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index 5fc292c..880d485 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -79,7 +79,8 @@ struct rtc_plat_data {
 	struct rtc_device *rtc;
 	void __iomem *ioaddr;
 	int irq;
-	struct clk *clk;
+	struct clk *clk_ref;
+	struct clk *clk_ipg;
 	struct rtc_time g_rtc_alarm;
 	enum imx_rtc_type devtype;
 };
@@ -373,17 +374,28 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	if (IS_ERR(pdata->ioaddr))
 		return PTR_ERR(pdata->ioaddr);
 
-	pdata->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(pdata->clk)) {
-		dev_err(&pdev->dev, "unable to get clock!\n");
-		return PTR_ERR(pdata->clk);
+	pdata->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(pdata->clk_ipg)) {
+		dev_err(&pdev->dev, "unable to get ipg clock!\n");
+		return PTR_ERR(pdata->clk_ipg);
 	}
 
-	ret = clk_prepare_enable(pdata->clk);
+	ret = clk_prepare_enable(pdata->clk_ipg);
 	if (ret)
 		return ret;
 
-	rate = clk_get_rate(pdata->clk);
+	pdata->clk_ref = devm_clk_get(&pdev->dev, "ref");
+	if (IS_ERR(pdata->clk_ref)) {
+		dev_err(&pdev->dev, "unable to get ref clock!\n");
+		ret = PTR_ERR(pdata->clk_ref);
+		goto exit_put_clk_ipg;
+	}
+
+	ret = clk_prepare_enable(pdata->clk_ref);
+	if (ret)
+		goto exit_put_clk_ipg;
+
+	rate = clk_get_rate(pdata->clk_ref);
 
 	if (rate == 32768)
 		reg = RTC_INPUT_CLK_32768HZ;
@@ -394,7 +406,7 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	else {
 		dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
 		ret = -EINVAL;
-		goto exit_put_clk;
+		goto exit_put_clk_ref;
 	}
 
 	reg |= RTC_ENABLE_BIT;
@@ -402,7 +414,7 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
 		dev_err(&pdev->dev, "hardware module can't be enabled!\n");
 		ret = -EIO;
-		goto exit_put_clk;
+		goto exit_put_clk_ref;
 	}
 
 	platform_set_drvdata(pdev, pdata);
@@ -424,15 +436,17 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 				  THIS_MODULE);
 	if (IS_ERR(rtc)) {
 		ret = PTR_ERR(rtc);
-		goto exit_put_clk;
+		goto exit_put_clk_ref;
 	}
 
 	pdata->rtc = rtc;
 
 	return 0;
 
-exit_put_clk:
-	clk_disable_unprepare(pdata->clk);
+exit_put_clk_ref:
+	clk_disable_unprepare(pdata->clk_ref);
+exit_put_clk_ipg:
+	clk_disable_unprepare(pdata->clk_ipg);
 
 	return ret;
 }
@@ -441,7 +455,8 @@ static int mxc_rtc_remove(struct platform_device *pdev)
 {
 	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(pdata->clk);
+	clk_disable_unprepare(pdata->clk_ref);
+	clk_disable_unprepare(pdata->clk_ipg);
 
 	return 0;
 }
-- 
1.7.4.4

[rtc-linux] [PATCH v5 3/6] rtc: mxc: use a second rtc clock

[Philippe Reynes]

The mxc RTC needs two clocks, one for the input
reference, and one for the IP. But this driver
was only using one clock (for the reference).
This patch add the second clock (for the IP).

Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/rtc/rtc-mxc.c |   41 ++++++++++++++++++++++++++++-------------
 1 files changed, 28 insertions(+), 13 deletions(-)

diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index 5fc292c..880d485 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -79,7 +79,8 @@ struct rtc_plat_data {
 	struct rtc_device *rtc;
 	void __iomem *ioaddr;
 	int irq;
-	struct clk *clk;
+	struct clk *clk_ref;
+	struct clk *clk_ipg;
 	struct rtc_time g_rtc_alarm;
 	enum imx_rtc_type devtype;
 };
@@ -373,17 +374,28 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	if (IS_ERR(pdata->ioaddr))
 		return PTR_ERR(pdata->ioaddr);
 
-	pdata->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(pdata->clk)) {
-		dev_err(&pdev->dev, "unable to get clock!\n");
-		return PTR_ERR(pdata->clk);
+	pdata->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(pdata->clk_ipg)) {
+		dev_err(&pdev->dev, "unable to get ipg clock!\n");
+		return PTR_ERR(pdata->clk_ipg);
 	}
 
-	ret = clk_prepare_enable(pdata->clk);
+	ret = clk_prepare_enable(pdata->clk_ipg);
 	if (ret)
 		return ret;
 
-	rate = clk_get_rate(pdata->clk);
+	pdata->clk_ref = devm_clk_get(&pdev->dev, "ref");
+	if (IS_ERR(pdata->clk_ref)) {
+		dev_err(&pdev->dev, "unable to get ref clock!\n");
+		ret = PTR_ERR(pdata->clk_ref);
+		goto exit_put_clk_ipg;
+	}
+
+	ret = clk_prepare_enable(pdata->clk_ref);
+	if (ret)
+		goto exit_put_clk_ipg;
+
+	rate = clk_get_rate(pdata->clk_ref);
 
 	if (rate == 32768)
 		reg = RTC_INPUT_CLK_32768HZ;
@@ -394,7 +406,7 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	else {
 		dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
 		ret = -EINVAL;
-		goto exit_put_clk;
+		goto exit_put_clk_ref;
 	}
 
 	reg |= RTC_ENABLE_BIT;
@@ -402,7 +414,7 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
 		dev_err(&pdev->dev, "hardware module can't be enabled!\n");
 		ret = -EIO;
-		goto exit_put_clk;
+		goto exit_put_clk_ref;
 	}
 
 	platform_set_drvdata(pdev, pdata);
@@ -424,15 +436,17 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 				  THIS_MODULE);
 	if (IS_ERR(rtc)) {
 		ret = PTR_ERR(rtc);
-		goto exit_put_clk;
+		goto exit_put_clk_ref;
 	}
 
 	pdata->rtc = rtc;
 
 	return 0;
 
-exit_put_clk:
-	clk_disable_unprepare(pdata->clk);
+exit_put_clk_ref:
+	clk_disable_unprepare(pdata->clk_ref);
+exit_put_clk_ipg:
+	clk_disable_unprepare(pdata->clk_ipg);
 
 	return ret;
 }
@@ -441,7 +455,8 @@ static int mxc_rtc_remove(struct platform_device *pdev)
 {
 	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(pdata->clk);
+	clk_disable_unprepare(pdata->clk_ref);
+	clk_disable_unprepare(pdata->clk_ipg);
 
 	return 0;
 }
-- 
1.7.4.4

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v5 3/6] rtc: mxc: use a second rtc clock

[Philippe Reynes]

The mxc RTC needs two clocks, one for the input
reference, and one for the IP. But this driver
was only using one clock (for the reference).
This patch add the second clock (for the IP).

Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/rtc/rtc-mxc.c |   41 ++++++++++++++++++++++++++++-------------
 1 files changed, 28 insertions(+), 13 deletions(-)

diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index 5fc292c..880d485 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -79,7 +79,8 @@ struct rtc_plat_data {
 	struct rtc_device *rtc;
 	void __iomem *ioaddr;
 	int irq;
-	struct clk *clk;
+	struct clk *clk_ref;
+	struct clk *clk_ipg;
 	struct rtc_time g_rtc_alarm;
 	enum imx_rtc_type devtype;
 };
@@ -373,17 +374,28 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	if (IS_ERR(pdata->ioaddr))
 		return PTR_ERR(pdata->ioaddr);
 
-	pdata->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(pdata->clk)) {
-		dev_err(&pdev->dev, "unable to get clock!\n");
-		return PTR_ERR(pdata->clk);
+	pdata->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(pdata->clk_ipg)) {
+		dev_err(&pdev->dev, "unable to get ipg clock!\n");
+		return PTR_ERR(pdata->clk_ipg);
 	}
 
-	ret = clk_prepare_enable(pdata->clk);
+	ret = clk_prepare_enable(pdata->clk_ipg);
 	if (ret)
 		return ret;
 
-	rate = clk_get_rate(pdata->clk);
+	pdata->clk_ref = devm_clk_get(&pdev->dev, "ref");
+	if (IS_ERR(pdata->clk_ref)) {
+		dev_err(&pdev->dev, "unable to get ref clock!\n");
+		ret = PTR_ERR(pdata->clk_ref);
+		goto exit_put_clk_ipg;
+	}
+
+	ret = clk_prepare_enable(pdata->clk_ref);
+	if (ret)
+		goto exit_put_clk_ipg;
+
+	rate = clk_get_rate(pdata->clk_ref);
 
 	if (rate == 32768)
 		reg = RTC_INPUT_CLK_32768HZ;
@@ -394,7 +406,7 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	else {
 		dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
 		ret = -EINVAL;
-		goto exit_put_clk;
+		goto exit_put_clk_ref;
 	}
 
 	reg |= RTC_ENABLE_BIT;
@@ -402,7 +414,7 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
 		dev_err(&pdev->dev, "hardware module can't be enabled!\n");
 		ret = -EIO;
-		goto exit_put_clk;
+		goto exit_put_clk_ref;
 	}
 
 	platform_set_drvdata(pdev, pdata);
@@ -424,15 +436,17 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 				  THIS_MODULE);
 	if (IS_ERR(rtc)) {
 		ret = PTR_ERR(rtc);
-		goto exit_put_clk;
+		goto exit_put_clk_ref;
 	}
 
 	pdata->rtc = rtc;
 
 	return 0;
 
-exit_put_clk:
-	clk_disable_unprepare(pdata->clk);
+exit_put_clk_ref:
+	clk_disable_unprepare(pdata->clk_ref);
+exit_put_clk_ipg:
+	clk_disable_unprepare(pdata->clk_ipg);
 
 	return ret;
 }
@@ -441,7 +455,8 @@ static int mxc_rtc_remove(struct platform_device *pdev)
 {
 	struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(pdata->clk);
+	clk_disable_unprepare(pdata->clk_ref);
+	clk_disable_unprepare(pdata->clk_ipg);
 
 	return 0;
 }
-- 
1.7.4.4

[PATCH v5 4/6] dt-binding: document the binding for mxc rtc

[Philippe Reynes]

This adds documentation of device tree bindings for the
mxc rtc.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 Documentation/devicetree/bindings/rtc/rtc-mxc.txt |   26 +++++++++++++++++++++
 1 files changed, 26 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt

diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
new file mode 100644
index 0000000..49aa550
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
@@ -0,0 +1,26 @@
+* Real Time Clock of the i.MX SoCs
+
+RTC controller for the i.MX SoCs
+
+Required properties:
+- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: IRQ line for the RTC.
+- clocks: should contain two entries:
+  * one for the input reference
+  * one for the the SoC RTC
+- clock-names: should contain:
+  * "ref" for the input reference clock
+  * "ipg" for the SoC RTC clock
+
+Example:
+
+rtc@10007000 {
+	compatible = "fsl,imx21-rtc";
+	reg = <0x10007000 0x1000>;
+	interrupts = <22>;
+	clocks = <&clks IMX27_CLK_CKIL>,
+	       	 <&clks IMX27_CLK_RTC_IPG_GATE>;
+	clock-names = "ref", "ipg";
+};
-- 
1.7.4.4

[rtc-linux] [PATCH v5 4/6] dt-binding: document the binding for mxc rtc

[Philippe Reynes]

This adds documentation of device tree bindings for the
mxc rtc.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 Documentation/devicetree/bindings/rtc/rtc-mxc.txt |   26 +++++++++++++++++++++
 1 files changed, 26 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt

diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
new file mode 100644
index 0000000..49aa550
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
@@ -0,0 +1,26 @@
+* Real Time Clock of the i.MX SoCs
+
+RTC controller for the i.MX SoCs
+
+Required properties:
+- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: IRQ line for the RTC.
+- clocks: should contain two entries:
+  * one for the input reference
+  * one for the the SoC RTC
+- clock-names: should contain:
+  * "ref" for the input reference clock
+  * "ipg" for the SoC RTC clock
+
+Example:
+
+rtc@10007000 {
+	compatible = "fsl,imx21-rtc";
+	reg = <0x10007000 0x1000>;
+	interrupts = <22>;
+	clocks = <&clks IMX27_CLK_CKIL>,
+	       	 <&clks IMX27_CLK_RTC_IPG_GATE>;
+	clock-names = "ref", "ipg";
+};
-- 
1.7.4.4

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v5 4/6] dt-binding: document the binding for mxc rtc

[Philippe Reynes]

This adds documentation of device tree bindings for the
mxc rtc.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree at vger.kernel.org
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 Documentation/devicetree/bindings/rtc/rtc-mxc.txt |   26 +++++++++++++++++++++
 1 files changed, 26 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt

diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
new file mode 100644
index 0000000..49aa550
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
@@ -0,0 +1,26 @@
+* Real Time Clock of the i.MX SoCs
+
+RTC controller for the i.MX SoCs
+
+Required properties:
+- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: IRQ line for the RTC.
+- clocks: should contain two entries:
+  * one for the input reference
+  * one for the the SoC RTC
+- clock-names: should contain:
+  * "ref" for the input reference clock
+  * "ipg" for the SoC RTC clock
+
+Example:
+
+rtc at 10007000 {
+	compatible = "fsl,imx21-rtc";
+	reg = <0x10007000 0x1000>;
+	interrupts = <22>;
+	clocks = <&clks IMX27_CLK_CKIL>,
+	       	 <&clks IMX27_CLK_RTC_IPG_GATE>;
+	clock-names = "ref", "ipg";
+};
-- 
1.7.4.4

[PATCH v5 5/6] rtc: mxc: add support of device tree

[Philippe Reynes]

Add device tree support for the mxc rtc driver.

Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/rtc/rtc-mxc.c |   19 ++++++++++++++++++-
 1 files changed, 18 insertions(+), 1 deletions(-)

diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index 880d485..7bd89d9 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -16,6 +16,8 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #define RTC_INPUT_CLK_32768HZ	(0x00 << 5)
 #define RTC_INPUT_CLK_32000HZ	(0x01 << 5)
@@ -98,6 +100,15 @@ static const struct platform_device_id imx_rtc_devtype[] = {
 };
 MODULE_DEVICE_TABLE(platform, imx_rtc_devtype);
 
+#ifdef CONFIG_OF
+static const struct of_device_id imx_rtc_dt_ids[] = {
+	{ .compatible = "fsl,imx1-rtc", .data = (const void *)IMX1_RTC },
+	{ .compatible = "fsl,imx21-rtc", .data = (const void *)IMX21_RTC },
+	{}
+};
+MODULE_DEVICE_TABLE(of, imx_rtc_dt_ids);
+#endif
+
 static inline int is_imx1_rtc(struct rtc_plat_data *data)
 {
 	return data->devtype == IMX1_RTC;
@@ -362,12 +373,17 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	u32 reg;
 	unsigned long rate;
 	int ret;
+	const struct of_device_id *of_id;
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return -ENOMEM;
 
-	pdata->devtype = pdev->id_entry->driver_data;
+	of_id = of_match_device(imx_rtc_dt_ids, &pdev->dev);
+	if (of_id)
+		pdata->devtype = (enum imx_rtc_type)of_id->data;
+	else
+		pdata->devtype = pdev->id_entry->driver_data;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
@@ -488,6 +504,7 @@ static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume);
 static struct platform_driver mxc_rtc_driver = {
 	.driver = {
 		   .name	= "mxc_rtc",
+		   .of_match_table = of_match_ptr(imx_rtc_dt_ids),
 		   .pm		= &mxc_rtc_pm_ops,
 	},
 	.id_table = imx_rtc_devtype,
-- 
1.7.4.4

[rtc-linux] [PATCH v5 5/6] rtc: mxc: add support of device tree

[Philippe Reynes]

Add device tree support for the mxc rtc driver.

Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/rtc/rtc-mxc.c |   19 ++++++++++++++++++-
 1 files changed, 18 insertions(+), 1 deletions(-)

diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index 880d485..7bd89d9 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -16,6 +16,8 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #define RTC_INPUT_CLK_32768HZ	(0x00 << 5)
 #define RTC_INPUT_CLK_32000HZ	(0x01 << 5)
@@ -98,6 +100,15 @@ static const struct platform_device_id imx_rtc_devtype[] = {
 };
 MODULE_DEVICE_TABLE(platform, imx_rtc_devtype);
 
+#ifdef CONFIG_OF
+static const struct of_device_id imx_rtc_dt_ids[] = {
+	{ .compatible = "fsl,imx1-rtc", .data = (const void *)IMX1_RTC },
+	{ .compatible = "fsl,imx21-rtc", .data = (const void *)IMX21_RTC },
+	{}
+};
+MODULE_DEVICE_TABLE(of, imx_rtc_dt_ids);
+#endif
+
 static inline int is_imx1_rtc(struct rtc_plat_data *data)
 {
 	return data->devtype == IMX1_RTC;
@@ -362,12 +373,17 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	u32 reg;
 	unsigned long rate;
 	int ret;
+	const struct of_device_id *of_id;
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return -ENOMEM;
 
-	pdata->devtype = pdev->id_entry->driver_data;
+	of_id = of_match_device(imx_rtc_dt_ids, &pdev->dev);
+	if (of_id)
+		pdata->devtype = (enum imx_rtc_type)of_id->data;
+	else
+		pdata->devtype = pdev->id_entry->driver_data;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
@@ -488,6 +504,7 @@ static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume);
 static struct platform_driver mxc_rtc_driver = {
 	.driver = {
 		   .name	= "mxc_rtc",
+		   .of_match_table = of_match_ptr(imx_rtc_dt_ids),
 		   .pm		= &mxc_rtc_pm_ops,
 	},
 	.id_table = imx_rtc_devtype,
-- 
1.7.4.4

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v5 5/6] rtc: mxc: add support of device tree

[Philippe Reynes]

Add device tree support for the mxc rtc driver.

Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/rtc/rtc-mxc.c |   19 ++++++++++++++++++-
 1 files changed, 18 insertions(+), 1 deletions(-)

diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index 880d485..7bd89d9 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -16,6 +16,8 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #define RTC_INPUT_CLK_32768HZ	(0x00 << 5)
 #define RTC_INPUT_CLK_32000HZ	(0x01 << 5)
@@ -98,6 +100,15 @@ static const struct platform_device_id imx_rtc_devtype[] = {
 };
 MODULE_DEVICE_TABLE(platform, imx_rtc_devtype);
 
+#ifdef CONFIG_OF
+static const struct of_device_id imx_rtc_dt_ids[] = {
+	{ .compatible = "fsl,imx1-rtc", .data = (const void *)IMX1_RTC },
+	{ .compatible = "fsl,imx21-rtc", .data = (const void *)IMX21_RTC },
+	{}
+};
+MODULE_DEVICE_TABLE(of, imx_rtc_dt_ids);
+#endif
+
 static inline int is_imx1_rtc(struct rtc_plat_data *data)
 {
 	return data->devtype == IMX1_RTC;
@@ -362,12 +373,17 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	u32 reg;
 	unsigned long rate;
 	int ret;
+	const struct of_device_id *of_id;
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return -ENOMEM;
 
-	pdata->devtype = pdev->id_entry->driver_data;
+	of_id = of_match_device(imx_rtc_dt_ids, &pdev->dev);
+	if (of_id)
+		pdata->devtype = (enum imx_rtc_type)of_id->data;
+	else
+		pdata->devtype = pdev->id_entry->driver_data;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
@@ -488,6 +504,7 @@ static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume);
 static struct platform_driver mxc_rtc_driver = {
 	.driver = {
 		   .name	= "mxc_rtc",
+		   .of_match_table = of_match_ptr(imx_rtc_dt_ids),
 		   .pm		= &mxc_rtc_pm_ops,
 	},
 	.id_table = imx_rtc_devtype,
-- 
1.7.4.4

[PATCH v5 6/6] imx27: dt: add support of internal rtc

[Philippe Reynes]

Add support of internal rtc on imx27.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 arch/arm/boot/dts/imx27.dtsi |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index b69be5c..feb9d34 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -144,6 +144,15 @@
 				clock-names = "ipg", "per";
 			};
 
+			rtc: rtc@10007000 {
+				compatible = "fsl,imx21-rtc";
+				reg = <0x10007000 0x1000>;
+				interrupts = <22>;
+				clocks = <&clks IMX27_CLK_CKIL>,
+					 <&clks IMX27_CLK_RTC_IPG_GATE>;
+				clock-names = "ref", "ipg";
+			};
+
 			kpp: kpp@10008000 {
 				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
 				reg = <0x10008000 0x1000>;
-- 
1.7.4.4

[rtc-linux] [PATCH v5 6/6] imx27: dt: add support of internal rtc

[Philippe Reynes]

Add support of internal rtc on imx27.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 arch/arm/boot/dts/imx27.dtsi |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index b69be5c..feb9d34 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -144,6 +144,15 @@
 				clock-names = "ipg", "per";
 			};
 
+			rtc: rtc@10007000 {
+				compatible = "fsl,imx21-rtc";
+				reg = <0x10007000 0x1000>;
+				interrupts = <22>;
+				clocks = <&clks IMX27_CLK_CKIL>,
+					 <&clks IMX27_CLK_RTC_IPG_GATE>;
+				clock-names = "ref", "ipg";
+			};
+
 			kpp: kpp@10008000 {
 				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
 				reg = <0x10008000 0x1000>;
-- 
1.7.4.4

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v5 6/6] imx27: dt: add support of internal rtc

[Philippe Reynes]

Add support of internal rtc on imx27.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 arch/arm/boot/dts/imx27.dtsi |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index b69be5c..feb9d34 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -144,6 +144,15 @@
 				clock-names = "ipg", "per";
 			};
 
+			rtc: rtc at 10007000 {
+				compatible = "fsl,imx21-rtc";
+				reg = <0x10007000 0x1000>;
+				interrupts = <22>;
+				clocks = <&clks IMX27_CLK_CKIL>,
+					 <&clks IMX27_CLK_RTC_IPG_GATE>;
+				clock-names = "ref", "ipg";
+			};
+
 			kpp: kpp at 10008000 {
 				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
 				reg = <0x10008000 0x1000>;
-- 
1.7.4.4

Re: [PATCH v5 0/6] add device tree support for mxc rtc

[Shawn Guo]

On Sun, Jul 26, 2015 at 11:37:47PM +0200, Philippe Reynes wrote:
> This serie add the device tree support for the mxc rtc driver.
> To do this, three steps are required :
> - define two rtc clocks for imx31 and imx35
> - enhance mxc rtc driver to use two clocks (ref and ipg)
> - add device tree support to mxc rtc driver

Looks good to me.  As we already have Alexandre's ACK on rtc-mxc driver
part, I will queue the series on IMX tree with waiting for a couple of
days to see if there is any objection.

Shawn

> 
> Changelog:
> v5: (thanks Shawn Guo, Rob Herring and Alexandre Belloni)
> - rename rtc clock to ref
> - fix typo in binding documentation
> - enable rtc by default on imx27
> v4: (thanks Alexandre Belloni)
> - add prepare_clock for rtc clock
> - split apf27: dt: enable support in two patches
> v3: (thanks Fabio Estevam)
> - fix typo in imx35 clock comment
> v2: (thanks Shawn Guo and Alexandre Belloni)
> - add a second clock to imx35
> - split the add of clock in a separate patches
> - split the dt documentation in a separate patch
> 
> Philippe Reynes (6):
>   imx31: add a second rtc clock
>   imx35: define two clocks for rtc
>   rtc: mxc: use a second rtc clock
>   dt-binding: document the binding for mxc rtc
>   rtc: mxc: add support of device tree
>   imx27: dt: add support of internal rtc
> 
>  Documentation/devicetree/bindings/rtc/rtc-mxc.txt |   26 +++++++++
>  arch/arm/boot/dts/imx27.dtsi                      |    9 +++
>  drivers/clk/imx/clk-imx31.c                       |    3 +-
>  drivers/clk/imx/clk-imx35.c                       |    6 ++-
>  drivers/rtc/rtc-mxc.c                             |   60 ++++++++++++++++-----
>  5 files changed, 88 insertions(+), 16 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt
> 
> -- 
> 1.7.4.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

[rtc-linux] Re: [PATCH v5 0/6] add device tree support for mxc rtc

[Shawn Guo]

On Sun, Jul 26, 2015 at 11:37:47PM +0200, Philippe Reynes wrote:
> This serie add the device tree support for the mxc rtc driver.
> To do this, three steps are required :
> - define two rtc clocks for imx31 and imx35
> - enhance mxc rtc driver to use two clocks (ref and ipg)
> - add device tree support to mxc rtc driver

Looks good to me.  As we already have Alexandre's ACK on rtc-mxc driver
part, I will queue the series on IMX tree with waiting for a couple of
days to see if there is any objection.

Shawn

> 
> Changelog:
> v5: (thanks Shawn Guo, Rob Herring and Alexandre Belloni)
> - rename rtc clock to ref
> - fix typo in binding documentation
> - enable rtc by default on imx27
> v4: (thanks Alexandre Belloni)
> - add prepare_clock for rtc clock
> - split apf27: dt: enable support in two patches
> v3: (thanks Fabio Estevam)
> - fix typo in imx35 clock comment
> v2: (thanks Shawn Guo and Alexandre Belloni)
> - add a second clock to imx35
> - split the add of clock in a separate patches
> - split the dt documentation in a separate patch
> 
> Philippe Reynes (6):
>   imx31: add a second rtc clock
>   imx35: define two clocks for rtc
>   rtc: mxc: use a second rtc clock
>   dt-binding: document the binding for mxc rtc
>   rtc: mxc: add support of device tree
>   imx27: dt: add support of internal rtc
> 
>  Documentation/devicetree/bindings/rtc/rtc-mxc.txt |   26 +++++++++
>  arch/arm/boot/dts/imx27.dtsi                      |    9 +++
>  drivers/clk/imx/clk-imx31.c                       |    3 +-
>  drivers/clk/imx/clk-imx35.c                       |    6 ++-
>  drivers/rtc/rtc-mxc.c                             |   60 ++++++++++++++++-----
>  5 files changed, 88 insertions(+), 16 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt
> 
> -- 
> 1.7.4.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v5 0/6] add device tree support for mxc rtc

[Shawn Guo]

On Sun, Jul 26, 2015 at 11:37:47PM +0200, Philippe Reynes wrote:
> This serie add the device tree support for the mxc rtc driver.
> To do this, three steps are required :
> - define two rtc clocks for imx31 and imx35
> - enhance mxc rtc driver to use two clocks (ref and ipg)
> - add device tree support to mxc rtc driver

Looks good to me.  As we already have Alexandre's ACK on rtc-mxc driver
part, I will queue the series on IMX tree with waiting for a couple of
days to see if there is any objection.

Shawn

> 
> Changelog:
> v5: (thanks Shawn Guo, Rob Herring and Alexandre Belloni)
> - rename rtc clock to ref
> - fix typo in binding documentation
> - enable rtc by default on imx27
> v4: (thanks Alexandre Belloni)
> - add prepare_clock for rtc clock
> - split apf27: dt: enable support in two patches
> v3: (thanks Fabio Estevam)
> - fix typo in imx35 clock comment
> v2: (thanks Shawn Guo and Alexandre Belloni)
> - add a second clock to imx35
> - split the add of clock in a separate patches
> - split the dt documentation in a separate patch
> 
> Philippe Reynes (6):
>   imx31: add a second rtc clock
>   imx35: define two clocks for rtc
>   rtc: mxc: use a second rtc clock
>   dt-binding: document the binding for mxc rtc
>   rtc: mxc: add support of device tree
>   imx27: dt: add support of internal rtc
> 
>  Documentation/devicetree/bindings/rtc/rtc-mxc.txt |   26 +++++++++
>  arch/arm/boot/dts/imx27.dtsi                      |    9 +++
>  drivers/clk/imx/clk-imx31.c                       |    3 +-
>  drivers/clk/imx/clk-imx35.c                       |    6 ++-
>  drivers/rtc/rtc-mxc.c                             |   60 ++++++++++++++++-----
>  5 files changed, 88 insertions(+), 16 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt
> 
> -- 
> 1.7.4.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

Re: [PATCH v5 4/6] dt-binding: document the binding for mxc rtc

[Shawn Guo]

On Sun, Jul 26, 2015 at 11:37:51PM +0200, Philippe Reynes wrote:
> This adds documentation of device tree bindings for the
> mxc rtc.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: Kumar Gala <galak@codeaurora.org>

DT maintainers,

Any comments on the bindings?  Otherwise, I will queue the whole patch
series on IMX tree for 4.3.

Shawn

> Cc: devicetree@vger.kernel.org
> Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
> ---
>  Documentation/devicetree/bindings/rtc/rtc-mxc.txt |   26 +++++++++++++++++++++
>  1 files changed, 26 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt
> 
> diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
> new file mode 100644
> index 0000000..49aa550
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
> @@ -0,0 +1,26 @@
> +* Real Time Clock of the i.MX SoCs
> +
> +RTC controller for the i.MX SoCs
> +
> +Required properties:
> +- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- interrupts: IRQ line for the RTC.
> +- clocks: should contain two entries:
> +  * one for the input reference
> +  * one for the the SoC RTC
> +- clock-names: should contain:
> +  * "ref" for the input reference clock
> +  * "ipg" for the SoC RTC clock
> +
> +Example:
> +
> +rtc@10007000 {
> +	compatible = "fsl,imx21-rtc";
> +	reg = <0x10007000 0x1000>;
> +	interrupts = <22>;
> +	clocks = <&clks IMX27_CLK_CKIL>,
> +	       	 <&clks IMX27_CLK_RTC_IPG_GATE>;
> +	clock-names = "ref", "ipg";
> +};
> -- 
> 1.7.4.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

[rtc-linux] Re: [PATCH v5 4/6] dt-binding: document the binding for mxc rtc

[Shawn Guo]

On Sun, Jul 26, 2015 at 11:37:51PM +0200, Philippe Reynes wrote:
> This adds documentation of device tree bindings for the
> mxc rtc.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: Kumar Gala <galak@codeaurora.org>

DT maintainers,

Any comments on the bindings?  Otherwise, I will queue the whole patch
series on IMX tree for 4.3.

Shawn

> Cc: devicetree@vger.kernel.org
> Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
> ---
>  Documentation/devicetree/bindings/rtc/rtc-mxc.txt |   26 +++++++++++++++++++++
>  1 files changed, 26 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt
> 
> diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
> new file mode 100644
> index 0000000..49aa550
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
> @@ -0,0 +1,26 @@
> +* Real Time Clock of the i.MX SoCs
> +
> +RTC controller for the i.MX SoCs
> +
> +Required properties:
> +- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- interrupts: IRQ line for the RTC.
> +- clocks: should contain two entries:
> +  * one for the input reference
> +  * one for the the SoC RTC
> +- clock-names: should contain:
> +  * "ref" for the input reference clock
> +  * "ipg" for the SoC RTC clock
> +
> +Example:
> +
> +rtc@10007000 {
> +	compatible = "fsl,imx21-rtc";
> +	reg = <0x10007000 0x1000>;
> +	interrupts = <22>;
> +	clocks = <&clks IMX27_CLK_CKIL>,
> +	       	 <&clks IMX27_CLK_RTC_IPG_GATE>;
> +	clock-names = "ref", "ipg";
> +};
> -- 
> 1.7.4.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v5 4/6] dt-binding: document the binding for mxc rtc

[Shawn Guo]

On Sun, Jul 26, 2015 at 11:37:51PM +0200, Philippe Reynes wrote:
> This adds documentation of device tree bindings for the
> mxc rtc.
> 
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: Kumar Gala <galak@codeaurora.org>

DT maintainers,

Any comments on the bindings?  Otherwise, I will queue the whole patch
series on IMX tree for 4.3.

Shawn

> Cc: devicetree at vger.kernel.org
> Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
> ---
>  Documentation/devicetree/bindings/rtc/rtc-mxc.txt |   26 +++++++++++++++++++++
>  1 files changed, 26 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt
> 
> diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
> new file mode 100644
> index 0000000..49aa550
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
> @@ -0,0 +1,26 @@
> +* Real Time Clock of the i.MX SoCs
> +
> +RTC controller for the i.MX SoCs
> +
> +Required properties:
> +- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- interrupts: IRQ line for the RTC.
> +- clocks: should contain two entries:
> +  * one for the input reference
> +  * one for the the SoC RTC
> +- clock-names: should contain:
> +  * "ref" for the input reference clock
> +  * "ipg" for the SoC RTC clock
> +
> +Example:
> +
> +rtc at 10007000 {
> +	compatible = "fsl,imx21-rtc";
> +	reg = <0x10007000 0x1000>;
> +	interrupts = <22>;
> +	clocks = <&clks IMX27_CLK_CKIL>,
> +	       	 <&clks IMX27_CLK_RTC_IPG_GATE>;
> +	clock-names = "ref", "ipg";
> +};
> -- 
> 1.7.4.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

Re: [PATCH v5 0/6] add device tree support for mxc rtc

[Shawn Guo]

On Sun, Jul 26, 2015 at 11:37:47PM +0200, Philippe Reynes wrote:
> Philippe Reynes (6):
>   imx31: add a second rtc clock

clk: imx: ...

>   imx35: define two clocks for rtc

clk: imx35: ...

>   rtc: mxc: use a second rtc clock
>   dt-binding: document the binding for mxc rtc
>   rtc: mxc: add support of device tree
>   imx27: dt: add support of internal rtc

ARM: dts: imx27: ...

Applied all with above minor changes on subject prefix.

Shawn

[rtc-linux] Re: [PATCH v5 0/6] add device tree support for mxc rtc

[Shawn Guo]

On Sun, Jul 26, 2015 at 11:37:47PM +0200, Philippe Reynes wrote:
> Philippe Reynes (6):
>   imx31: add a second rtc clock

clk: imx: ...

>   imx35: define two clocks for rtc

clk: imx35: ...

>   rtc: mxc: use a second rtc clock
>   dt-binding: document the binding for mxc rtc
>   rtc: mxc: add support of device tree
>   imx27: dt: add support of internal rtc

ARM: dts: imx27: ...

Applied all with above minor changes on subject prefix.

Shawn

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[PATCH v5 0/6] add device tree support for mxc rtc

[Shawn Guo]

On Sun, Jul 26, 2015 at 11:37:47PM +0200, Philippe Reynes wrote:
> Philippe Reynes (6):
>   imx31: add a second rtc clock

clk: imx: ...

>   imx35: define two clocks for rtc

clk: imx35: ...

>   rtc: mxc: use a second rtc clock
>   dt-binding: document the binding for mxc rtc
>   rtc: mxc: add support of device tree
>   imx27: dt: add support of internal rtc

ARM: dts: imx27: ...

Applied all with above minor changes on subject prefix.

Shawn