[PATCH v5 00/11] CXL EEH Handling

[PATCH v5 00/11] CXL EEH Handling

[Daniel Axtens]

CXL accelerators are unfortunately not immune from failure. This patch
set enables them to particpate in the Extended Error Handling process.

This series starts with a number of preparatory patches:

 - Patch 1 is cleanup: converting macros to static inlines.

 - Patch 2 makes sure we don't touch the hardware when it has failed.
 
 - Patches 3-5 make the 'unplug' functions idempotent, so that if we
   get part way through recovery and then fail, being completely
   unplugged as part of removal doesn't cause us to oops out.

 - Patches 6 and 7 refactor init and teardown paths for the adapter
   and AFUs, so that they can be configured and deconfigured
   separately from their allocation and release.

 - Patch 8 stops cxl_reset from breaking EEH.

Patches 9 and 10 are parts of EEH.

 - Firstly we have a kernel flag that allows us to confidently assert
   the hardware will not change (be reflashed) when it it reset. We
   need this in order to be able to safely do EEH recovery.

 - We then have the EEH support itself.

Finally, we add a CONFIG_CXL_EEH symbol. This allows drivers to depend
on the API we provide to enable CXL EEH, or to be easily backportable
if EEH is optional.

Changes from v4 are trivial:
 - Undo the rc/if split - this will be redone in a follow-up patch.
 - Rebase on top of mpe's next tree so as to solve some merge
   conflicts.

Changes from v3 are minor:
 - Clarification of responsibility of CXL driver vs driver bound to
   vPHB with regards to preventing inappropriate access of hardware
   during recovery.
 - Clean up unused rc in cxl_alloc_adapter, thanks David Laight.
 - Break setting rc and testing rc into different lines, thanks mpe
   and Cyril.
 - If we fail to init an AFU, don't try to select the best mode.

Changes from v2 are mostly minor cleanups, reflecting some review and
further testing.
 - Use static inlines instead of macros.
 - Propagate PCI link state to devices on the vPHB.
 - Various cleanup, thanks Cyril Bur.
 - Use pci_channel_offline instead of a direct check.
 - Don't ifdef, just provide the symbol so that drivers know that the
   new API is available. Thanks to Cyril for patiently explaining this
   to me about 3 times before I understood.

Changes from v1:
 - More comprehensive link down checks, including vPHB.
 - Rebased to apply cleanly to 4.2-rc4.
 - cxl reset changes.
 - CONFIG_CXL_EEH symbol addition.
 - add better vPHB support to EEH.

Daniel Axtens (11):
  cxl: Convert MMIO read/write macros to inline functions
  cxl: Drop commands if the PCI channel is not in normal state
  cxl: Allocate and release the SPA with the AFU
  cxl: Make IRQ release idempotent
  cxl: Clean up adapter MMIO unmap path.
  cxl: Refactor adaptor init/teardown
  cxl: Refactor AFU init/teardown
  cxl: Don't remove AFUs/vPHBs in cxl_reset
  cxl: Allow the kernel to trust that an image won't change on PERST.
  cxl: EEH support
  cxl: Add CONFIG_CXL_EEH symbol

 Documentation/ABI/testing/sysfs-class-cxl |  10 +
 drivers/misc/cxl/Kconfig                  |   6 +
 drivers/misc/cxl/api.c                    |   7 +
 drivers/misc/cxl/context.c                |   6 +-
 drivers/misc/cxl/cxl.h                    |  84 ++++-
 drivers/misc/cxl/file.c                   |  19 ++
 drivers/misc/cxl/irq.c                    |   9 +
 drivers/misc/cxl/native.c                 | 105 +++++-
 drivers/misc/cxl/pci.c                    | 525 ++++++++++++++++++++++++------
 drivers/misc/cxl/sysfs.c                  |  26 ++
 drivers/misc/cxl/vphb.c                   |  34 ++
 include/misc/cxl.h                        |  10 +
 12 files changed, 708 insertions(+), 133 deletions(-)

-- 
2.1.4

[PATCH v5 01/11] cxl: Convert MMIO read/write macros to inline functions

[Daniel Axtens]

We're about to make these more complex, so make them functions
first.

Signed-off-by: Daniel Axtens <dja@axtens.net>
---
 drivers/misc/cxl/cxl.h | 51 ++++++++++++++++++++++++++++++++++----------------
 1 file changed, 35 insertions(+), 16 deletions(-)

diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 4fd66cabde1e..6a93bfbcd826 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -537,10 +537,15 @@ static inline void __iomem *_cxl_p1_addr(struct cxl *cxl, cxl_p1_reg_t reg)
 	return cxl->p1_mmio + cxl_reg_off(reg);
 }
 
-#define cxl_p1_write(cxl, reg, val) \
-	out_be64(_cxl_p1_addr(cxl, reg), val)
-#define cxl_p1_read(cxl, reg) \
-	in_be64(_cxl_p1_addr(cxl, reg))
+static inline void cxl_p1_write(struct cxl *cxl, cxl_p1_reg_t reg, u64 val)
+{
+	out_be64(_cxl_p1_addr(cxl, reg), val);
+}
+
+static inline u64 cxl_p1_read(struct cxl *cxl, cxl_p1_reg_t reg)
+{
+	return in_be64(_cxl_p1_addr(cxl, reg));
+}
 
 static inline void __iomem *_cxl_p1n_addr(struct cxl_afu *afu, cxl_p1n_reg_t reg)
 {
@@ -548,26 +553,40 @@ static inline void __iomem *_cxl_p1n_addr(struct cxl_afu *afu, cxl_p1n_reg_t reg
 	return afu->p1n_mmio + cxl_reg_off(reg);
 }
 
-#define cxl_p1n_write(afu, reg, val) \
-	out_be64(_cxl_p1n_addr(afu, reg), val)
-#define cxl_p1n_read(afu, reg) \
-	in_be64(_cxl_p1n_addr(afu, reg))
+static inline void cxl_p1n_write(struct cxl_afu *afu, cxl_p1n_reg_t reg, u64 val)
+{
+	out_be64(_cxl_p1n_addr(afu, reg), val);
+}
+
+static inline u64 cxl_p1n_read(struct cxl_afu *afu, cxl_p1n_reg_t reg)
+{
+	return in_be64(_cxl_p1n_addr(afu, reg));
+}
 
 static inline void __iomem *_cxl_p2n_addr(struct cxl_afu *afu, cxl_p2n_reg_t reg)
 {
 	return afu->p2n_mmio + cxl_reg_off(reg);
 }
 
-#define cxl_p2n_write(afu, reg, val) \
-	out_be64(_cxl_p2n_addr(afu, reg), val)
-#define cxl_p2n_read(afu, reg) \
-	in_be64(_cxl_p2n_addr(afu, reg))
+static inline void cxl_p2n_write(struct cxl_afu *afu, cxl_p2n_reg_t reg, u64 val)
+{
+	out_be64(_cxl_p2n_addr(afu, reg), val);
+}
 
+static inline u64 cxl_p2n_read(struct cxl_afu *afu, cxl_p2n_reg_t reg)
+{
+	return in_be64(_cxl_p2n_addr(afu, reg));
+}
 
-#define cxl_afu_cr_read64(afu, cr, off) \
-	in_le64((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off))
-#define cxl_afu_cr_read32(afu, cr, off) \
-	in_le32((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off))
+static inline u64 cxl_afu_cr_read64(struct cxl_afu *afu, int cr, u64 off)
+{
+	return in_le64((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off));
+}
+
+static inline u32 cxl_afu_cr_read32(struct cxl_afu *afu, int cr, u64 off)
+{
+	return in_le32((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off));
+}
 u16 cxl_afu_cr_read16(struct cxl_afu *afu, int cr, u64 off);
 u8 cxl_afu_cr_read8(struct cxl_afu *afu, int cr, u64 off);
 
-- 
2.1.4

[PATCH v5 02/11] cxl: Drop commands if the PCI channel is not in normal state

[Daniel Axtens]

If the PCI channel has gone down, don't attempt to poke the hardware.

We need to guard every time cxl_whatever_(read|write) is called. This
is because a call to those functions will dereference an offset into an
mmio register, and the mmio mappings get invalidated in the EEH
teardown.

Check in the read/write functions in the header.
We give them the same semantics as usual PCI operations:
 - a write to a channel that is down is ignored.
 - a read from a channel that is down returns all fs.

Also, we try to access the MMIO space of a vPHB device as part of the
PCI disable path. Because that's a read that bypasses most of our usual
checks, we handle it explicitly.

As far as user visible warnings go:
 - Check link state in file ops, return -EIO if down.
 - Be reasonably quiet if there's an error in a teardown path,
   or when we already know the hardware is going down.
 - Throw a big WARN if someone tries to start a CXL operation
   while the card is down. This gives a useful stacktrace for
   debugging whatever is doing that.

Signed-off-by: Daniel Axtens <dja@axtens.net>
---
 drivers/misc/cxl/context.c |  6 +++-
 drivers/misc/cxl/cxl.h     | 44 ++++++++++++++++++++++------
 drivers/misc/cxl/file.c    | 19 ++++++++++++
 drivers/misc/cxl/native.c  | 72 ++++++++++++++++++++++++++++++++++++++++++++--
 drivers/misc/cxl/vphb.c    | 26 +++++++++++++++++
 5 files changed, 155 insertions(+), 12 deletions(-)

diff --git a/drivers/misc/cxl/context.c b/drivers/misc/cxl/context.c
index 1287148629c0..615842115848 100644
--- a/drivers/misc/cxl/context.c
+++ b/drivers/misc/cxl/context.c
@@ -193,7 +193,11 @@ int __detach_context(struct cxl_context *ctx)
 	if (status != STARTED)
 		return -EBUSY;
 
-	WARN_ON(cxl_detach_process(ctx));
+	/* Only warn if we detached while the link was OK.
+	 * If detach fails when hw is down, we don't care.
+	 */
+	WARN_ON(cxl_detach_process(ctx) &&
+		cxl_adapter_link_ok(ctx->afu->adapter));
 	flush_work(&ctx->fault_work); /* Only needed for dedicated process */
 	put_pid(ctx->pid);
 	cxl_ctx_put();
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 6a93bfbcd826..9b9e89fd02cc 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -531,6 +531,14 @@ struct cxl_process_element {
 	__be32 software_state;
 } __packed;
 
+static inline bool cxl_adapter_link_ok(struct cxl *cxl)
+{
+	struct pci_dev *pdev;
+
+	pdev = to_pci_dev(cxl->dev.parent);
+	return !pci_channel_offline(pdev);
+}
+
 static inline void __iomem *_cxl_p1_addr(struct cxl *cxl, cxl_p1_reg_t reg)
 {
 	WARN_ON(!cpu_has_feature(CPU_FTR_HVMODE));
@@ -539,12 +547,16 @@ static inline void __iomem *_cxl_p1_addr(struct cxl *cxl, cxl_p1_reg_t reg)
 
 static inline void cxl_p1_write(struct cxl *cxl, cxl_p1_reg_t reg, u64 val)
 {
-	out_be64(_cxl_p1_addr(cxl, reg), val);
+	if (likely(cxl_adapter_link_ok(cxl)))
+		out_be64(_cxl_p1_addr(cxl, reg), val);
 }
 
 static inline u64 cxl_p1_read(struct cxl *cxl, cxl_p1_reg_t reg)
 {
-	return in_be64(_cxl_p1_addr(cxl, reg));
+	if (likely(cxl_adapter_link_ok(cxl)))
+		return in_be64(_cxl_p1_addr(cxl, reg));
+	else
+		return ~0ULL;
 }
 
 static inline void __iomem *_cxl_p1n_addr(struct cxl_afu *afu, cxl_p1n_reg_t reg)
@@ -555,12 +567,16 @@ static inline void __iomem *_cxl_p1n_addr(struct cxl_afu *afu, cxl_p1n_reg_t reg
 
 static inline void cxl_p1n_write(struct cxl_afu *afu, cxl_p1n_reg_t reg, u64 val)
 {
-	out_be64(_cxl_p1n_addr(afu, reg), val);
+	if (likely(cxl_adapter_link_ok(afu->adapter)))
+		out_be64(_cxl_p1n_addr(afu, reg), val);
 }
 
 static inline u64 cxl_p1n_read(struct cxl_afu *afu, cxl_p1n_reg_t reg)
 {
-	return in_be64(_cxl_p1n_addr(afu, reg));
+	if (likely(cxl_adapter_link_ok(afu->adapter)))
+		return in_be64(_cxl_p1n_addr(afu, reg));
+	else
+		return ~0ULL;
 }
 
 static inline void __iomem *_cxl_p2n_addr(struct cxl_afu *afu, cxl_p2n_reg_t reg)
@@ -570,22 +586,34 @@ static inline void __iomem *_cxl_p2n_addr(struct cxl_afu *afu, cxl_p2n_reg_t reg
 
 static inline void cxl_p2n_write(struct cxl_afu *afu, cxl_p2n_reg_t reg, u64 val)
 {
-	out_be64(_cxl_p2n_addr(afu, reg), val);
+	if (likely(cxl_adapter_link_ok(afu->adapter)))
+		out_be64(_cxl_p2n_addr(afu, reg), val);
 }
 
 static inline u64 cxl_p2n_read(struct cxl_afu *afu, cxl_p2n_reg_t reg)
 {
-	return in_be64(_cxl_p2n_addr(afu, reg));
+	if (likely(cxl_adapter_link_ok(afu->adapter)))
+		return in_be64(_cxl_p2n_addr(afu, reg));
+	else
+		return ~0ULL;
 }
 
 static inline u64 cxl_afu_cr_read64(struct cxl_afu *afu, int cr, u64 off)
 {
-	return in_le64((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off));
+	if (likely(cxl_adapter_link_ok(afu->adapter)))
+		return in_le64((afu)->afu_desc_mmio + (afu)->crs_offset +
+			       ((cr) * (afu)->crs_len) + (off));
+	else
+		return ~0ULL;
 }
 
 static inline u32 cxl_afu_cr_read32(struct cxl_afu *afu, int cr, u64 off)
 {
-	return in_le32((afu)->afu_desc_mmio + (afu)->crs_offset + ((cr) * (afu)->crs_len) + (off));
+	if (likely(cxl_adapter_link_ok(afu->adapter)))
+		return in_le32((afu)->afu_desc_mmio + (afu)->crs_offset +
+			       ((cr) * (afu)->crs_len) + (off));
+	else
+		return 0xffffffff;
 }
 u16 cxl_afu_cr_read16(struct cxl_afu *afu, int cr, u64 off);
 u8 cxl_afu_cr_read8(struct cxl_afu *afu, int cr, u64 off);
diff --git a/drivers/misc/cxl/file.c b/drivers/misc/cxl/file.c
index c8c8bfa2679b..57bdb473749f 100644
--- a/drivers/misc/cxl/file.c
+++ b/drivers/misc/cxl/file.c
@@ -73,6 +73,11 @@ static int __afu_open(struct inode *inode, struct file *file, bool master)
 	if (!afu->current_mode)
 		goto err_put_afu;
 
+	if (!cxl_adapter_link_ok(adapter)) {
+		rc = -EIO;
+		goto err_put_afu;
+	}
+
 	if (!(ctx = cxl_context_alloc())) {
 		rc = -ENOMEM;
 		goto err_put_afu;
@@ -238,6 +243,9 @@ long afu_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	if (ctx->status == CLOSED)
 		return -EIO;
 
+	if (!cxl_adapter_link_ok(ctx->afu->adapter))
+		return -EIO;
+
 	pr_devel("afu_ioctl\n");
 	switch (cmd) {
 	case CXL_IOCTL_START_WORK:
@@ -265,6 +273,9 @@ int afu_mmap(struct file *file, struct vm_area_struct *vm)
 	if (ctx->status != STARTED)
 		return -EIO;
 
+	if (!cxl_adapter_link_ok(ctx->afu->adapter))
+		return -EIO;
+
 	return cxl_context_iomap(ctx, vm);
 }
 
@@ -309,6 +320,9 @@ ssize_t afu_read(struct file *file, char __user *buf, size_t count,
 	int rc;
 	DEFINE_WAIT(wait);
 
+	if (!cxl_adapter_link_ok(ctx->afu->adapter))
+		return -EIO;
+
 	if (count < CXL_READ_MIN_SIZE)
 		return -EINVAL;
 
@@ -319,6 +333,11 @@ ssize_t afu_read(struct file *file, char __user *buf, size_t count,
 		if (ctx_event_pending(ctx))
 			break;
 
+		if (!cxl_adapter_link_ok(ctx->afu->adapter)) {
+			rc = -EIO;
+			goto out;
+		}
+
 		if (file->f_flags & O_NONBLOCK) {
 			rc = -EAGAIN;
 			goto out;
diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
index f74ff80266c8..44568dd68bb9 100644
--- a/drivers/misc/cxl/native.c
+++ b/drivers/misc/cxl/native.c
@@ -41,6 +41,13 @@ static int afu_control(struct cxl_afu *afu, u64 command,
 			rc = -EBUSY;
 			goto out;
 		}
+
+		if (!cxl_adapter_link_ok(afu->adapter)) {
+			afu->enabled = enabled;
+			rc = -EIO;
+			goto out;
+		}
+
 		pr_devel_ratelimited("AFU control... (0x%016llx)\n",
 				     AFU_Cntl | command);
 		cpu_relax();
@@ -85,6 +92,10 @@ int __cxl_afu_reset(struct cxl_afu *afu)
 
 int cxl_afu_check_and_enable(struct cxl_afu *afu)
 {
+	if (!cxl_adapter_link_ok(afu->adapter)) {
+		WARN(1, "Refusing to enable afu while link down!\n");
+		return -EIO;
+	}
 	if (afu->enabled)
 		return 0;
 	return afu_enable(afu);
@@ -103,6 +114,12 @@ int cxl_psl_purge(struct cxl_afu *afu)
 
 	pr_devel("PSL purge request\n");
 
+	if (!cxl_adapter_link_ok(afu->adapter)) {
+		dev_warn(&afu->dev, "PSL Purge called with link down, ignoring\n");
+		rc = -EIO;
+		goto out;
+	}
+
 	if ((AFU_Cntl & CXL_AFU_Cntl_An_ES_MASK) != CXL_AFU_Cntl_An_ES_Disabled) {
 		WARN(1, "psl_purge request while AFU not disabled!\n");
 		cxl_afu_disable(afu);
@@ -119,6 +136,11 @@ int cxl_psl_purge(struct cxl_afu *afu)
 			rc = -EBUSY;
 			goto out;
 		}
+		if (!cxl_adapter_link_ok(afu->adapter)) {
+			rc = -EIO;
+			goto out;
+		}
+
 		dsisr = cxl_p2n_read(afu, CXL_PSL_DSISR_An);
 		pr_devel_ratelimited("PSL purging... PSL_CNTL: 0x%016llx  PSL_DSISR: 0x%016llx\n", PSL_CNTL, dsisr);
 		if (dsisr & CXL_PSL_DSISR_TRANS) {
@@ -215,6 +237,8 @@ int cxl_tlb_slb_invalidate(struct cxl *adapter)
 			dev_warn(&adapter->dev, "WARNING: CXL adapter wide TLBIA timed out!\n");
 			return -EBUSY;
 		}
+		if (!cxl_adapter_link_ok(adapter))
+			return -EIO;
 		cpu_relax();
 	}
 
@@ -224,6 +248,8 @@ int cxl_tlb_slb_invalidate(struct cxl *adapter)
 			dev_warn(&adapter->dev, "WARNING: CXL adapter wide SLBIA timed out!\n");
 			return -EBUSY;
 		}
+		if (!cxl_adapter_link_ok(adapter))
+			return -EIO;
 		cpu_relax();
 	}
 	return 0;
@@ -240,6 +266,11 @@ int cxl_afu_slbia(struct cxl_afu *afu)
 			dev_warn(&afu->dev, "WARNING: CXL AFU SLBIA timed out!\n");
 			return -EBUSY;
 		}
+		/* If the adapter has gone down, we can assume that we
+		 * will PERST it and that will invalidate everything.
+		 */
+		if (!cxl_adapter_link_ok(afu->adapter))
+			return -EIO;
 		cpu_relax();
 	}
 	return 0;
@@ -279,6 +310,8 @@ static void slb_invalid(struct cxl_context *ctx)
 	cxl_p1_write(adapter, CXL_PSL_SLBIA, CXL_TLB_SLB_IQ_LPIDPID);
 
 	while (1) {
+		if (!cxl_adapter_link_ok(adapter))
+			break;
 		slbia = cxl_p1_read(adapter, CXL_PSL_SLBIA);
 		if (!(slbia & CXL_TLB_SLB_P))
 			break;
@@ -308,6 +341,11 @@ static int do_process_element_cmd(struct cxl_context *ctx,
 			rc = -EBUSY;
 			goto out;
 		}
+		if (!cxl_adapter_link_ok(ctx->afu->adapter)) {
+			dev_warn(&ctx->afu->dev, "WARNING: Device link down, aborting Process Element Command!\n");
+			rc = -EIO;
+			goto out;
+		}
 		state = be64_to_cpup(ctx->afu->sw_command_status);
 		if (state == ~0ULL) {
 			pr_err("cxl: Error adding process element to AFU\n");
@@ -355,8 +393,13 @@ static int terminate_process_element(struct cxl_context *ctx)
 
 	mutex_lock(&ctx->afu->spa_mutex);
 	pr_devel("%s Terminate pe: %i started\n", __func__, ctx->pe);
-	rc = do_process_element_cmd(ctx, CXL_SPA_SW_CMD_TERMINATE,
-				    CXL_PE_SOFTWARE_STATE_V | CXL_PE_SOFTWARE_STATE_T);
+	/* We could be asked to terminate when the hw is down. That
+	 * should always succeed: it's not running if the hw has gone
+	 * away and is being reset.
+	 */
+	if (cxl_adapter_link_ok(ctx->afu->adapter))
+		rc = do_process_element_cmd(ctx, CXL_SPA_SW_CMD_TERMINATE,
+					    CXL_PE_SOFTWARE_STATE_V | CXL_PE_SOFTWARE_STATE_T);
 	ctx->elem->software_state = 0;	/* Remove Valid bit */
 	pr_devel("%s Terminate pe: %i finished\n", __func__, ctx->pe);
 	mutex_unlock(&ctx->afu->spa_mutex);
@@ -369,7 +412,14 @@ static int remove_process_element(struct cxl_context *ctx)
 
 	mutex_lock(&ctx->afu->spa_mutex);
 	pr_devel("%s Remove pe: %i started\n", __func__, ctx->pe);
-	if (!(rc = do_process_element_cmd(ctx, CXL_SPA_SW_CMD_REMOVE, 0)))
+
+	/* We could be asked to remove when the hw is down. Again, if
+	 * the hw is down, the PE is gone, so we succeed.
+	 */
+	if (cxl_adapter_link_ok(ctx->afu->adapter))
+		rc = do_process_element_cmd(ctx, CXL_SPA_SW_CMD_REMOVE, 0);
+
+	if (!rc)
 		ctx->pe_inserted = false;
 	slb_invalid(ctx);
 	pr_devel("%s Remove pe: %i finished\n", __func__, ctx->pe);
@@ -612,6 +662,11 @@ int cxl_afu_activate_mode(struct cxl_afu *afu, int mode)
 	if (!(mode & afu->modes_supported))
 		return -EINVAL;
 
+	if (!cxl_adapter_link_ok(afu->adapter)) {
+		WARN(1, "Device link is down, refusing to activate!\n");
+		return -EIO;
+	}
+
 	if (mode == CXL_MODE_DIRECTED)
 		return activate_afu_directed(afu);
 	if (mode == CXL_MODE_DEDICATED)
@@ -622,6 +677,11 @@ int cxl_afu_activate_mode(struct cxl_afu *afu, int mode)
 
 int cxl_attach_process(struct cxl_context *ctx, bool kernel, u64 wed, u64 amr)
 {
+	if (!cxl_adapter_link_ok(ctx->afu->adapter)) {
+		WARN(1, "Device link is down, refusing to attach process!\n");
+		return -EIO;
+	}
+
 	ctx->kernel = kernel;
 	if (ctx->afu->current_mode == CXL_MODE_DIRECTED)
 		return attach_afu_directed(ctx, wed, amr);
@@ -666,6 +726,12 @@ int cxl_get_irq(struct cxl_afu *afu, struct cxl_irq_info *info)
 {
 	u64 pidtid;
 
+	/* If the adapter has gone away, we can't get any meaningful
+	 * information.
+	 */
+	if (!cxl_adapter_link_ok(afu->adapter))
+		return -EIO;
+
 	info->dsisr = cxl_p2n_read(afu, CXL_PSL_DSISR_An);
 	info->dar = cxl_p2n_read(afu, CXL_PSL_DAR_An);
 	info->dsr = cxl_p2n_read(afu, CXL_PSL_DSR_An);
diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c
index 2eba002b580b..2930911c1e42 100644
--- a/drivers/misc/cxl/vphb.c
+++ b/drivers/misc/cxl/vphb.c
@@ -138,6 +138,26 @@ static int cxl_pcie_config_info(struct pci_bus *bus, unsigned int devfn,
 	return 0;
 }
 
+
+static inline bool cxl_config_link_ok(struct pci_bus *bus)
+{
+	struct pci_controller *phb;
+	struct cxl_afu *afu;
+
+	/* Config space IO is based on phb->cfg_addr, which is based on
+	 * afu_desc_mmio. This isn't safe to read/write when the link
+	 * goes down, as EEH tears down MMIO space.
+	 *
+	 * Check if the link is OK before proceeding.
+	 */
+
+	phb = pci_bus_to_host(bus);
+	if (phb == NULL)
+		return false;
+	afu = (struct cxl_afu *)phb->private_data;
+	return cxl_adapter_link_ok(afu->adapter);
+}
+
 static int cxl_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
 				int offset, int len, u32 *val)
 {
@@ -150,6 +170,9 @@ static int cxl_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
 	if (rc)
 		return rc;
 
+	if (!cxl_config_link_ok(bus))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
 	/* Can only read 32 bits */
 	*val = (in_le32(ioaddr) >> shift) & mask;
 	return PCIBIOS_SUCCESSFUL;
@@ -167,6 +190,9 @@ static int cxl_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
 	if (rc)
 		return rc;
 
+	if (!cxl_config_link_ok(bus))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
 	/* Can only write 32 bits so do read-modify-write */
 	mask <<= shift;
 	val <<= shift;
-- 
2.1.4

[PATCH v5 03/11] cxl: Allocate and release the SPA with the AFU

[Daniel Axtens]

Previously the SPA was allocated and freed upon entering and leaving
AFU-directed mode. This causes some issues for error recovery - contexts
hold a pointer inside the SPA, and they may persist after the AFU has
been detached.

We would ideally like to allocate the SPA when the AFU is allocated, and
release it until the AFU is released. However, we don't know how big the
SPA needs to be until we read the AFU descriptor.

Therefore, restructure the code:

 - Allocate the SPA only once, on the first attach.

 - Release the SPA only when the entire AFU is being released (not
   detached). Guard the release with a NULL check, so we don't free
   if it was never allocated (e.g. dedicated mode)

Acked-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
---
 drivers/misc/cxl/cxl.h    |  3 +++
 drivers/misc/cxl/native.c | 33 ++++++++++++++++++++++-----------
 drivers/misc/cxl/pci.c    |  2 ++
 3 files changed, 27 insertions(+), 11 deletions(-)

diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 9b9e89fd02cc..d540542f9931 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -632,6 +632,9 @@ void unregister_cxl_calls(struct cxl_calls *calls);
 int cxl_alloc_adapter_nr(struct cxl *adapter);
 void cxl_remove_adapter_nr(struct cxl *adapter);
 
+int cxl_alloc_spa(struct cxl_afu *afu);
+void cxl_release_spa(struct cxl_afu *afu);
+
 int cxl_file_init(void);
 void cxl_file_exit(void);
 int cxl_register_adapter(struct cxl *adapter);
diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
index 44568dd68bb9..b37f2e8004f5 100644
--- a/drivers/misc/cxl/native.c
+++ b/drivers/misc/cxl/native.c
@@ -183,10 +183,8 @@ static int spa_max_procs(int spa_size)
 	return ((spa_size / 8) - 96) / 17;
 }
 
-static int alloc_spa(struct cxl_afu *afu)
+int cxl_alloc_spa(struct cxl_afu *afu)
 {
-	u64 spap;
-
 	/* Work out how many pages to allocate */
 	afu->spa_order = 0;
 	do {
@@ -205,6 +203,13 @@ static int alloc_spa(struct cxl_afu *afu)
 	pr_devel("spa pages: %i afu->spa_max_procs: %i   afu->num_procs: %i\n",
 		 1<<afu->spa_order, afu->spa_max_procs, afu->num_procs);
 
+	return 0;
+}
+
+static void attach_spa(struct cxl_afu *afu)
+{
+	u64 spap;
+
 	afu->sw_command_status = (__be64 *)((char *)afu->spa +
 					    ((afu->spa_max_procs + 3) * 128));
 
@@ -213,14 +218,19 @@ static int alloc_spa(struct cxl_afu *afu)
 	spap |= CXL_PSL_SPAP_V;
 	pr_devel("cxl: SPA allocated at 0x%p. Max processes: %i, sw_command_status: 0x%p CXL_PSL_SPAP_An=0x%016llx\n", afu->spa, afu->spa_max_procs, afu->sw_command_status, spap);
 	cxl_p1n_write(afu, CXL_PSL_SPAP_An, spap);
-
-	return 0;
 }
 
-static void release_spa(struct cxl_afu *afu)
+static inline void detach_spa(struct cxl_afu *afu)
 {
 	cxl_p1n_write(afu, CXL_PSL_SPAP_An, 0);
-	free_pages((unsigned long) afu->spa, afu->spa_order);
+}
+
+void cxl_release_spa(struct cxl_afu *afu)
+{
+	if (afu->spa) {
+		free_pages((unsigned long) afu->spa, afu->spa_order);
+		afu->spa = NULL;
+	}
 }
 
 int cxl_tlb_slb_invalidate(struct cxl *adapter)
@@ -447,8 +457,11 @@ static int activate_afu_directed(struct cxl_afu *afu)
 
 	dev_info(&afu->dev, "Activating AFU directed mode\n");
 
-	if (alloc_spa(afu))
-		return -ENOMEM;
+	if (afu->spa == NULL) {
+		if (cxl_alloc_spa(afu))
+			return -ENOMEM;
+	}
+	attach_spa(afu);
 
 	cxl_p1n_write(afu, CXL_PSL_SCNTL_An, CXL_PSL_SCNTL_An_PM_AFU);
 	cxl_p1n_write(afu, CXL_PSL_AMOR_An, 0xFFFFFFFFFFFFFFFFULL);
@@ -559,8 +572,6 @@ static int deactivate_afu_directed(struct cxl_afu *afu)
 	cxl_afu_disable(afu);
 	cxl_psl_purge(afu);
 
-	release_spa(afu);
-
 	return 0;
 }
 
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 1d314f1f95fe..dc26cdd653ad 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -552,6 +552,8 @@ static void cxl_release_afu(struct device *dev)
 	pr_devel("cxl_release_afu\n");
 
 	idr_destroy(&afu->contexts_idr);
+	cxl_release_spa(afu);
+
 	kfree(afu);
 }
 
-- 
2.1.4

[PATCH v5 04/11] cxl: Make IRQ release idempotent

[Daniel Axtens]

Check if an IRQ is mapped before releasing it.

This will simplify future EEH code by allowing unconditional unmapping
of IRQs.

Acked-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
---
 drivers/misc/cxl/irq.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/misc/cxl/irq.c b/drivers/misc/cxl/irq.c
index b6b04374c10c..62823784f68e 100644
--- a/drivers/misc/cxl/irq.c
+++ b/drivers/misc/cxl/irq.c
@@ -341,6 +341,9 @@ int cxl_register_psl_err_irq(struct cxl *adapter)
 
 void cxl_release_psl_err_irq(struct cxl *adapter)
 {
+	if (adapter->err_virq != irq_find_mapping(NULL, adapter->err_hwirq))
+		return;
+
 	cxl_p1_write(adapter, CXL_PSL_ErrIVTE, 0x0000000000000000);
 	cxl_unmap_irq(adapter->err_virq, adapter);
 	cxl_release_one_irq(adapter, adapter->err_hwirq);
@@ -374,6 +377,9 @@ int cxl_register_serr_irq(struct cxl_afu *afu)
 
 void cxl_release_serr_irq(struct cxl_afu *afu)
 {
+	if (afu->serr_virq != irq_find_mapping(NULL, afu->serr_hwirq))
+		return;
+
 	cxl_p1n_write(afu, CXL_PSL_SERR_An, 0x0000000000000000);
 	cxl_unmap_irq(afu->serr_virq, afu);
 	cxl_release_one_irq(afu->adapter, afu->serr_hwirq);
@@ -400,6 +406,9 @@ int cxl_register_psl_irq(struct cxl_afu *afu)
 
 void cxl_release_psl_irq(struct cxl_afu *afu)
 {
+	if (afu->psl_virq != irq_find_mapping(NULL, afu->psl_hwirq))
+		return;
+
 	cxl_unmap_irq(afu->psl_virq, afu);
 	cxl_release_one_irq(afu->adapter, afu->psl_hwirq);
 	kfree(afu->psl_irq_name);
-- 
2.1.4

[PATCH v5 05/11] cxl: Clean up adapter MMIO unmap path.

[Daniel Axtens]

 - MMIO pointer unmapping is guarded by a null pointer check.
   However, iounmap doesn't null the pointer, just invalidate it.
   Therefore, explicitly null the pointer after unmapping.

 - afu_desc_mmio also needs to be unmapped.

 - PCI regions are allocated in cxl_map_adapter_regs.
   Therefore they should be released in unmap, not elsewhere.

Acked-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
---
 drivers/misc/cxl/pci.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index dc26cdd653ad..1dae1db3166d 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -539,10 +539,18 @@ err:
 
 static void cxl_unmap_slice_regs(struct cxl_afu *afu)
 {
-	if (afu->p2n_mmio)
+	if (afu->p2n_mmio) {
 		iounmap(afu->p2n_mmio);
-	if (afu->p1n_mmio)
+		afu->p2n_mmio = NULL;
+	}
+	if (afu->p1n_mmio) {
 		iounmap(afu->p1n_mmio);
+		afu->p1n_mmio = NULL;
+	}
+	if (afu->afu_desc_mmio) {
+		iounmap(afu->afu_desc_mmio);
+		afu->afu_desc_mmio = NULL;
+	}
 }
 
 static void cxl_release_afu(struct device *dev)
@@ -920,10 +928,16 @@ err1:
 
 static void cxl_unmap_adapter_regs(struct cxl *adapter)
 {
-	if (adapter->p1_mmio)
+	if (adapter->p1_mmio) {
 		iounmap(adapter->p1_mmio);
-	if (adapter->p2_mmio)
+		adapter->p1_mmio = NULL;
+		pci_release_region(to_pci_dev(adapter->dev.parent), 2);
+	}
+	if (adapter->p2_mmio) {
 		iounmap(adapter->p2_mmio);
+		adapter->p2_mmio = NULL;
+		pci_release_region(to_pci_dev(adapter->dev.parent), 0);
+	}
 }
 
 static int cxl_read_vsec(struct cxl *adapter, struct pci_dev *dev)
@@ -1132,8 +1146,6 @@ static void cxl_remove_adapter(struct cxl *adapter)
 
 	device_unregister(&adapter->dev);
 
-	pci_release_region(pdev, 0);
-	pci_release_region(pdev, 2);
 	pci_disable_device(pdev);
 }
 
-- 
2.1.4

[PATCH v5 06/11] cxl: Refactor adaptor init/teardown

[Daniel Axtens]

Some aspects of initialisation are done only once in the lifetime of
an adapter: for example, allocating memory for the adapter,
allocating the adapter number, or setting up sysfs/debugfs files.

However, we may want to be able to do some parts of the
initialisation multiple times: for example, in error recovery we
want to be able to tear down and then re-map IO memory and IRQs.

Therefore, refactor CXL init/teardown as follows.

 - Keep the overarching functions 'cxl_init_adapter' and its pair,
   'cxl_remove_adapter'.

 - Move all 'once only' allocation/freeing steps to the existing
   'cxl_alloc_adapter' function, and its pair 'cxl_release_adapter'
   (This involves moving allocation of the adapter number out of
   cxl_init_adapter.)

 - Create two new functions: 'cxl_configure_adapter', and its pair
   'cxl_deconfigure_adapter'. These two functions 'wire up' the
   hardware --- they (de)configure resources that do not need to
   last the entire lifetime of the adapter

Signed-off-by: Daniel Axtens <dja@axtens.net>
---
 drivers/misc/cxl/pci.c | 139 ++++++++++++++++++++++++++++++-------------------
 1 file changed, 86 insertions(+), 53 deletions(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 1dae1db3166d..feec4800e922 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -966,7 +966,6 @@ static int cxl_read_vsec(struct cxl *adapter, struct pci_dev *dev)
 	CXL_READ_VSEC_BASE_IMAGE(dev, vsec, &adapter->base_image);
 	CXL_READ_VSEC_IMAGE_STATE(dev, vsec, &image_state);
 	adapter->user_image_loaded = !!(image_state & CXL_VSEC_USER_IMAGE_LOADED);
-	adapter->perst_loads_image = true;
 	adapter->perst_select_user = !!(image_state & CXL_VSEC_USER_IMAGE_LOADED);
 
 	CXL_READ_VSEC_NAFUS(dev, vsec, &adapter->slices);
@@ -1026,22 +1025,33 @@ static void cxl_release_adapter(struct device *dev)
 
 	pr_devel("cxl_release_adapter\n");
 
+	cxl_remove_adapter_nr(adapter);
+
 	kfree(adapter);
 }
 
-static struct cxl *cxl_alloc_adapter(struct pci_dev *dev)
+static struct cxl *cxl_alloc_adapter(void)
 {
 	struct cxl *adapter;
 
 	if (!(adapter = kzalloc(sizeof(struct cxl), GFP_KERNEL)))
 		return NULL;
 
-	adapter->dev.parent = &dev->dev;
-	adapter->dev.release = cxl_release_adapter;
-	pci_set_drvdata(dev, adapter);
 	spin_lock_init(&adapter->afu_list_lock);
 
+	if (cxl_alloc_adapter_nr(adapter))
+		goto err1;
+
+	if (dev_set_name(&adapter->dev, "card%i", adapter->adapter_num))
+		goto err2;
+
 	return adapter;
+
+err2:
+	cxl_remove_adapter_nr(adapter);
+err1:
+	kfree(adapter);
+	return NULL;
 }
 
 static int sanitise_adapter_regs(struct cxl *adapter)
@@ -1050,57 +1060,96 @@ static int sanitise_adapter_regs(struct cxl *adapter)
 	return cxl_tlb_slb_invalidate(adapter);
 }
 
-static struct cxl *cxl_init_adapter(struct pci_dev *dev)
+/* This should contain *only* operations that can safely be done in
+ * both creation and recovery.
+ */
+static int cxl_configure_adapter(struct cxl *adapter, struct pci_dev *dev)
 {
-	struct cxl *adapter;
-	bool free = true;
 	int rc;
 
+	adapter->dev.parent = &dev->dev;
+	adapter->dev.release = cxl_release_adapter;
+	pci_set_drvdata(dev, adapter);
 
-	if (!(adapter = cxl_alloc_adapter(dev)))
-		return ERR_PTR(-ENOMEM);
+	rc = pci_enable_device(dev);
+	if (rc) {
+		dev_err(&dev->dev, "pci_enable_device failed: %i\n", rc);
+		return rc;
+	}
 
 	if ((rc = cxl_read_vsec(adapter, dev)))
-		goto err1;
+		return rc;
 
 	if ((rc = cxl_vsec_looks_ok(adapter, dev)))
-		goto err1;
+	        return rc;
 
 	if ((rc = setup_cxl_bars(dev)))
-		goto err1;
+		return rc;
 
 	if ((rc = switch_card_to_cxl(dev)))
-		goto err1;
-
-	if ((rc = cxl_alloc_adapter_nr(adapter)))
-		goto err1;
-
-	if ((rc = dev_set_name(&adapter->dev, "card%i", adapter->adapter_num)))
-		goto err2;
+		return rc;
 
 	if ((rc = cxl_update_image_control(adapter)))
-		goto err2;
+		return rc;
 
 	if ((rc = cxl_map_adapter_regs(adapter, dev)))
-		goto err2;
+		return rc;
 
 	if ((rc = sanitise_adapter_regs(adapter)))
-		goto err2;
+		goto err;
 
 	if ((rc = init_implementation_adapter_regs(adapter, dev)))
-		goto err3;
+		goto err;
 
 	if ((rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_CAPI)))
-		goto err3;
+		goto err;
 
 	/* If recovery happened, the last step is to turn on snooping.
 	 * In the non-recovery case this has no effect */
-	if ((rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_SNOOP_ON))) {
-		goto err3;
-	}
+	if ((rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_SNOOP_ON)))
+		goto err;
 
 	if ((rc = cxl_register_psl_err_irq(adapter)))
-		goto err3;
+		goto err;
+
+	return 0;
+
+err:
+	cxl_unmap_adapter_regs(adapter);
+	return rc;
+
+}
+
+static void cxl_deconfigure_adapter(struct cxl *adapter)
+{
+	struct pci_dev *pdev = to_pci_dev(adapter->dev.parent);
+
+	cxl_release_psl_err_irq(adapter);
+	cxl_unmap_adapter_regs(adapter);
+
+	pci_disable_device(pdev);
+}
+
+static struct cxl *cxl_init_adapter(struct pci_dev *dev)
+{
+	struct cxl *adapter;
+	int rc;
+
+	adapter = cxl_alloc_adapter();
+	if (!adapter)
+		return ERR_PTR(-ENOMEM);
+
+	/* Set defaults for parameters which need to persist over
+	 * configure/reconfigure
+	 */
+	adapter->perst_loads_image = true;
+
+	rc = cxl_configure_adapter(adapter, dev);
+	if (rc) {
+		pci_disable_device(dev);
+		cxl_release_adapter(&adapter->dev);
+		return ERR_PTR(rc);
+	}
 
 	/* Don't care if this one fails: */
 	cxl_debugfs_adapter_add(adapter);
@@ -1118,35 +1167,25 @@ static struct cxl *cxl_init_adapter(struct pci_dev *dev)
 	return adapter;
 
 err_put1:
-	device_unregister(&adapter->dev);
-	free = false;
+	/* This should mirror cxl_remove_adapter, except without the
+	 * sysfs parts
+	 */
 	cxl_debugfs_adapter_remove(adapter);
-	cxl_release_psl_err_irq(adapter);
-err3:
-	cxl_unmap_adapter_regs(adapter);
-err2:
-	cxl_remove_adapter_nr(adapter);
-err1:
-	if (free)
-		kfree(adapter);
+	cxl_deconfigure_adapter(adapter);
+	device_unregister(&adapter->dev);
 	return ERR_PTR(rc);
 }
 
 static void cxl_remove_adapter(struct cxl *adapter)
 {
-	struct pci_dev *pdev = to_pci_dev(adapter->dev.parent);
-
-	pr_devel("cxl_release_adapter\n");
+	pr_devel("cxl_remove_adapter\n");
 
 	cxl_sysfs_adapter_remove(adapter);
 	cxl_debugfs_adapter_remove(adapter);
-	cxl_release_psl_err_irq(adapter);
-	cxl_unmap_adapter_regs(adapter);
-	cxl_remove_adapter_nr(adapter);
 
-	device_unregister(&adapter->dev);
+	cxl_deconfigure_adapter(adapter);
 
-	pci_disable_device(pdev);
+	device_unregister(&adapter->dev);
 }
 
 static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -1160,15 +1199,9 @@ static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (cxl_verbose)
 		dump_cxl_config_space(dev);
 
-	if ((rc = pci_enable_device(dev))) {
-		dev_err(&dev->dev, "pci_enable_device failed: %i\n", rc);
-		return rc;
-	}
-
 	adapter = cxl_init_adapter(dev);
 	if (IS_ERR(adapter)) {
 		dev_err(&dev->dev, "cxl_init_adapter failed: %li\n", PTR_ERR(adapter));
-		pci_disable_device(dev);
 		return PTR_ERR(adapter);
 	}
 
-- 
2.1.4

[PATCH v5 07/11] cxl: Refactor AFU init/teardown

[Daniel Axtens]

As with an adapter, some aspects of initialisation are done only once
in the lifetime of an AFU: for example, allocating memory, or setting
up sysfs/debugfs files.

However, we may want to be able to do some parts of the initialisation
multiple times: for example, in error recovery we want to be able to
tear down and then re-map IO memory and IRQs.

Therefore, refactor AFU init/teardown as follows.

 - Create two new functions: 'cxl_configure_afu', and its pair
   'cxl_deconfigure_afu'. As with the adapter functions,
   these (de)configure resources that do not need to last the entire
   lifetime of the AFU.

 - Allocating and releasing memory remain the task of 'cxl_alloc_afu'
   and 'cxl_release_afu'.

 - Once-only functions that do not involve allocating/releasing memory
   stay in the overarching 'cxl_init_afu'/'cxl_remove_afu' pair.
   However, the task of picking an AFU mode and activating it has been
   broken out.

Signed-off-by: Daniel Axtens <dja@axtens.net>
---
 drivers/misc/cxl/pci.c | 95 ++++++++++++++++++++++++++++++--------------------
 1 file changed, 57 insertions(+), 38 deletions(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index feec4800e922..b63d96023c50 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -753,45 +753,70 @@ ssize_t cxl_afu_read_err_buffer(struct cxl_afu *afu, char *buf,
 	return count;
 }
 
-static int cxl_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
+static int cxl_configure_afu(struct cxl_afu *afu, struct cxl *adapter, struct pci_dev *dev)
 {
-	struct cxl_afu *afu;
-	bool free = true;
 	int rc;
 
-	if (!(afu = cxl_alloc_afu(adapter, slice)))
-		return -ENOMEM;
-
-	if ((rc = dev_set_name(&afu->dev, "afu%i.%i", adapter->adapter_num, slice)))
-		goto err1;
-
 	if ((rc = cxl_map_slice_regs(afu, adapter, dev)))
-		goto err1;
+		return rc;
 
 	if ((rc = sanitise_afu_regs(afu)))
-		goto err2;
+		goto err1;
 
 	/* We need to reset the AFU before we can read the AFU descriptor */
 	if ((rc = __cxl_afu_reset(afu)))
-		goto err2;
+		goto err1;
 
 	if (cxl_verbose)
 		dump_afu_descriptor(afu);
 
 	if ((rc = cxl_read_afu_descriptor(afu)))
-		goto err2;
+		goto err1;
 
 	if ((rc = cxl_afu_descriptor_looks_ok(afu)))
-		goto err2;
+		goto err1;
 
 	if ((rc = init_implementation_afu_regs(afu)))
-		goto err2;
+		goto err1;
 
 	if ((rc = cxl_register_serr_irq(afu)))
-		goto err2;
+		goto err1;
 
 	if ((rc = cxl_register_psl_irq(afu)))
-		goto err3;
+		goto err2;
+
+	return 0;
+
+err2:
+	cxl_release_serr_irq(afu);
+err1:
+	cxl_unmap_slice_regs(afu);
+	return rc;
+}
+
+static void cxl_deconfigure_afu(struct cxl_afu *afu)
+{
+	cxl_release_psl_irq(afu);
+	cxl_release_serr_irq(afu);
+	cxl_unmap_slice_regs(afu);
+}
+
+static int cxl_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
+{
+	struct cxl_afu *afu;
+	int rc;
+
+	afu = cxl_alloc_afu(adapter, slice);
+	if (!afu)
+		return -ENOMEM;
+
+	rc = dev_set_name(&afu->dev, "afu%i.%i", adapter->adapter_num, slice);
+	if (rc)
+		goto err_free;
+
+	rc = cxl_configure_afu(afu, adapter, dev);
+	if (rc)
+		goto err_free;
 
 	/* Don't care if this fails */
 	cxl_debugfs_afu_add(afu);
@@ -806,10 +831,6 @@ static int cxl_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
 	if ((rc = cxl_sysfs_afu_add(afu)))
 		goto err_put1;
 
-
-	if ((rc = cxl_afu_select_best_mode(afu)))
-		goto err_put2;
-
 	adapter->afu[afu->slice] = afu;
 
 	if ((rc = cxl_pci_vphb_add(afu)))
@@ -817,21 +838,16 @@ static int cxl_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
 
 	return 0;
 
-err_put2:
-	cxl_sysfs_afu_remove(afu);
 err_put1:
-	device_unregister(&afu->dev);
-	free = false;
+	cxl_deconfigure_afu(afu);
 	cxl_debugfs_afu_remove(afu);
-	cxl_release_psl_irq(afu);
-err3:
-	cxl_release_serr_irq(afu);
-err2:
-	cxl_unmap_slice_regs(afu);
-err1:
-	if (free)
-		kfree(afu);
+	device_unregister(&afu->dev);
 	return rc;
+
+err_free:
+	kfree(afu);
+	return rc;
+
 }
 
 static void cxl_remove_afu(struct cxl_afu *afu)
@@ -851,10 +867,7 @@ static void cxl_remove_afu(struct cxl_afu *afu)
 	cxl_context_detach_all(afu);
 	cxl_afu_deactivate_mode(afu);
 
-	cxl_release_psl_irq(afu);
-	cxl_release_serr_irq(afu);
-	cxl_unmap_slice_regs(afu);
-
+	cxl_deconfigure_afu(afu);
 	device_unregister(&afu->dev);
 }
 
@@ -1206,8 +1219,14 @@ static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	for (slice = 0; slice < adapter->slices; slice++) {
-		if ((rc = cxl_init_afu(adapter, slice, dev)))
+		if ((rc = cxl_init_afu(adapter, slice, dev))) {
 			dev_err(&dev->dev, "AFU %i failed to initialise: %i\n", slice, rc);
+			continue;
+		}
+
+		rc = cxl_afu_select_best_mode(adapter->afu[slice]);
+		if (rc)
+			dev_err(&dev->dev, "AFU %i failed to start: %i\n", slice, rc);
 	}
 
 	return 0;
-- 
2.1.4

[PATCH v5 08/11] cxl: Don't remove AFUs/vPHBs in cxl_reset

[Daniel Axtens]

If the driver doesn't participate in EEH, the AFUs will be removed
by cxl_remove, which will be invoked by EEH.

If the driver does particpate in EEH, the vPHB needs to stick around
so that the it can particpate.

In both cases, we shouldn't remove the AFU/vPHB.

Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
---
 drivers/misc/cxl/pci.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index b63d96023c50..2b61cb1ee62c 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -880,11 +880,6 @@ int cxl_reset(struct cxl *adapter)
 
 	dev_info(&dev->dev, "CXL reset\n");
 
-	for (i = 0; i < adapter->slices; i++) {
-		cxl_pci_vphb_remove(adapter->afu[i]);
-		cxl_remove_afu(adapter->afu[i]);
-	}
-
 	/* pcie_warm_reset requests a fundamental pci reset which includes a
 	 * PERST assert/deassert.  PERST triggers a loading of the image
 	 * if "user" or "factory" is selected in sysfs */
-- 
2.1.4

[PATCH v5 09/11] cxl: Allow the kernel to trust that an image won't change on PERST.

[Daniel Axtens]

Provide a kernel API and a sysfs entry which allow a user to specify
that when a card is PERSTed, it's image will stay the same, allowing
it to participate in EEH.

cxl_reset is used to reflash the card. In that case, we cannot safely
assert that the image will not change. Therefore, disallow cxl_reset
if the flag is set.

Signed-off-by: Daniel Axtens <dja@axtens.net>
---
 Documentation/ABI/testing/sysfs-class-cxl | 10 ++++++++++
 drivers/misc/cxl/api.c                    |  7 +++++++
 drivers/misc/cxl/cxl.h                    |  1 +
 drivers/misc/cxl/pci.c                    |  7 +++++++
 drivers/misc/cxl/sysfs.c                  | 26 ++++++++++++++++++++++++++
 include/misc/cxl.h                        | 10 ++++++++++
 6 files changed, 61 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index acfe9df83139..b07e86d4597f 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -223,3 +223,13 @@ Description:    write only
                 Writing 1 will issue a PERST to card which may cause the card
                 to reload the FPGA depending on load_image_on_perst.
 Users:		https://github.com/ibm-capi/libcxl
+
+What:		/sys/class/cxl/<card>/perst_reloads_same_image
+Date:		July 2015
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read/write
+		Trust that when an image is reloaded via PERST, it will not
+		have changed.
+		0 = don't trust, the image may be different (default)
+		1 = trust that the image will not change.
+Users:		https://github.com/ibm-capi/libcxl
diff --git a/drivers/misc/cxl/api.c b/drivers/misc/cxl/api.c
index 729e0851167d..6a768a9ad22f 100644
--- a/drivers/misc/cxl/api.c
+++ b/drivers/misc/cxl/api.c
@@ -327,3 +327,10 @@ int cxl_afu_reset(struct cxl_context *ctx)
 	return cxl_afu_check_and_enable(afu);
 }
 EXPORT_SYMBOL_GPL(cxl_afu_reset);
+
+void cxl_perst_reloads_same_image(struct cxl_afu *afu,
+				  bool perst_reloads_same_image)
+{
+	afu->adapter->perst_same_image = perst_reloads_same_image;
+}
+EXPORT_SYMBOL_GPL(cxl_perst_reloads_same_image);
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index d540542f9931..cda02412b01e 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -493,6 +493,7 @@ struct cxl {
 	bool user_image_loaded;
 	bool perst_loads_image;
 	bool perst_select_user;
+	bool perst_same_image;
 };
 
 int cxl_alloc_one_irq(struct cxl *adapter);
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 2b61cb1ee62c..bfbd6478c0c5 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -878,6 +878,12 @@ int cxl_reset(struct cxl *adapter)
 	int i;
 	u32 val;
 
+	if (adapter->perst_same_image) {
+		dev_warn(&dev->dev,
+			 "cxl: refusing to reset/reflash when perst_reloads_same_image is set.\n");
+		return -EINVAL;
+	}
+
 	dev_info(&dev->dev, "CXL reset\n");
 
 	/* pcie_warm_reset requests a fundamental pci reset which includes a
@@ -1151,6 +1157,7 @@ static struct cxl *cxl_init_adapter(struct pci_dev *dev)
 	 * configure/reconfigure
 	 */
 	adapter->perst_loads_image = true;
+	adapter->perst_same_image = false;
 
 	rc = cxl_configure_adapter(adapter, dev);
 	if (rc) {
diff --git a/drivers/misc/cxl/sysfs.c b/drivers/misc/cxl/sysfs.c
index 31f38bc71a3d..6619cf1f6e1f 100644
--- a/drivers/misc/cxl/sysfs.c
+++ b/drivers/misc/cxl/sysfs.c
@@ -112,12 +112,38 @@ static ssize_t load_image_on_perst_store(struct device *device,
 	return count;
 }
 
+static ssize_t perst_reloads_same_image_show(struct device *device,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct cxl *adapter = to_cxl_adapter(device);
+
+	return scnprintf(buf, PAGE_SIZE, "%i\n", adapter->perst_same_image);
+}
+
+static ssize_t perst_reloads_same_image_store(struct device *device,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct cxl *adapter = to_cxl_adapter(device);
+	int rc;
+	int val;
+
+	rc = sscanf(buf, "%i", &val);
+	if ((rc != 1) || !(val == 1 || val == 0))
+		return -EINVAL;
+
+	adapter->perst_same_image = (val == 1 ? true : false);
+	return count;
+}
+
 static struct device_attribute adapter_attrs[] = {
 	__ATTR_RO(caia_version),
 	__ATTR_RO(psl_revision),
 	__ATTR_RO(base_image),
 	__ATTR_RO(image_loaded),
 	__ATTR_RW(load_image_on_perst),
+	__ATTR_RW(perst_reloads_same_image),
 	__ATTR(reset, S_IWUSR, NULL, reset_adapter_store),
 };
 
diff --git a/include/misc/cxl.h b/include/misc/cxl.h
index 7a6c1d6cc173..f2ffe5bd720d 100644
--- a/include/misc/cxl.h
+++ b/include/misc/cxl.h
@@ -200,4 +200,14 @@ unsigned int cxl_fd_poll(struct file *file, struct poll_table_struct *poll);
 ssize_t cxl_fd_read(struct file *file, char __user *buf, size_t count,
 			   loff_t *off);
 
+/*
+ * For EEH, a driver may want to assert a PERST will reload the same image
+ * from flash into the FPGA.
+ *
+ * This is a property of the entire adapter, not a single AFU, so drivers
+ * should set this property with care!
+ */
+void cxl_perst_reloads_same_image(struct cxl_afu *afu,
+				  bool perst_reloads_same_image);
+
 #endif /* _MISC_CXL_H */
-- 
2.1.4

[PATCH v5 10/11] cxl: EEH support

[Daniel Axtens]

EEH (Enhanced Error Handling) allows a driver to recover from the
temporary failure of an attached PCI card. Enable basic CXL support
for EEH.

Signed-off-by: Daniel Axtens <dja@axtens.net>
---
 drivers/misc/cxl/cxl.h  |   1 +
 drivers/misc/cxl/pci.c  | 253 ++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/misc/cxl/vphb.c |   8 ++
 3 files changed, 262 insertions(+)

diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index cda02412b01e..6f5386653dae 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -726,6 +726,7 @@ int cxl_psl_purge(struct cxl_afu *afu);
 
 void cxl_stop_trace(struct cxl *cxl);
 int cxl_pci_vphb_add(struct cxl_afu *afu);
+void cxl_pci_vphb_reconfigure(struct cxl_afu *afu);
 void cxl_pci_vphb_remove(struct cxl_afu *afu);
 
 extern struct pci_driver cxl_pci_driver;
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index bfbd6478c0c5..03ddb2d8f974 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -24,6 +24,7 @@
 #include <asm/io.h>
 
 #include "cxl.h"
+#include <misc/cxl.h>
 
 
 #define CXL_PCI_VSEC_ID	0x1280
@@ -1252,10 +1253,262 @@ static void cxl_remove(struct pci_dev *dev)
 	cxl_remove_adapter(adapter);
 }
 
+static pci_ers_result_t cxl_vphb_error_detected(struct cxl_afu *afu,
+						pci_channel_state_t state)
+{
+	struct pci_dev *afu_dev;
+	pci_ers_result_t result = PCI_ERS_RESULT_NEED_RESET;
+	pci_ers_result_t afu_result = PCI_ERS_RESULT_NEED_RESET;
+
+	/* There should only be one entry, but go through the list
+	 * anyway
+	 */
+	list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
+		if (!afu_dev->driver)
+			continue;
+
+		afu_dev->error_state = state;
+
+		if (afu_dev->driver->err_handler)
+			afu_result = afu_dev->driver->err_handler->error_detected(afu_dev,
+										  state);
+		/* Disconnect trumps all, NONE trumps NEED_RESET */
+		if (afu_result == PCI_ERS_RESULT_DISCONNECT)
+			result = PCI_ERS_RESULT_DISCONNECT;
+		else if ((afu_result == PCI_ERS_RESULT_NONE) &&
+			 (result == PCI_ERS_RESULT_NEED_RESET))
+			result = PCI_ERS_RESULT_NONE;
+	}
+	return result;
+}
+
+static pci_ers_result_t cxl_pci_error_detected(struct pci_dev *pdev,
+					       pci_channel_state_t state)
+{
+	struct cxl *adapter = pci_get_drvdata(pdev);
+	struct cxl_afu *afu;
+	pci_ers_result_t result = PCI_ERS_RESULT_NEED_RESET;
+	int i;
+
+	/* At this point, we could still have an interrupt pending.
+	 * Let's try to get them out of the way before they do
+	 * anything we don't like.
+	 */
+	schedule();
+
+	/* If we're permanently dead, give up. */
+	if (state == pci_channel_io_perm_failure) {
+		/* Tell the AFU drivers; but we don't care what they
+		 * say, we're going away.
+		 */
+		for (i = 0; i < adapter->slices; i++) {
+			afu = adapter->afu[i];
+			cxl_vphb_error_detected(afu, state);
+		}
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	/* Are we reflashing?
+	 *
+	 * If we reflash, we could come back as something entirely
+	 * different, including a non-CAPI card. As such, by default
+	 * we don't participate in the process. We'll be unbound and
+	 * the slot re-probed. (TODO: check EEH doesn't blindly rebind
+	 * us!)
+	 *
+	 * However, this isn't the entire story: for reliablity
+	 * reasons, we usually want to reflash the FPGA on PERST in
+	 * order to get back to a more reliable known-good state.
+	 *
+	 * This causes us a bit of a problem: if we reflash we can't
+	 * trust that we'll come back the same - we could have a new
+	 * image and been PERSTed in order to load that
+	 * image. However, most of the time we actually *will* come
+	 * back the same - for example a regular EEH event.
+	 *
+	 * Therefore, we allow the user to assert that the image is
+	 * indeed the same and that we should continue on into EEH
+	 * anyway.
+	 */
+	if (adapter->perst_loads_image && !adapter->perst_same_image) {
+		/* TODO take the PHB out of CXL mode */
+		dev_info(&pdev->dev, "reflashing, so opting out of EEH!\n");
+		return PCI_ERS_RESULT_NONE;
+	}
+
+	/*
+	 * At this point, we want to try to recover.  We'll always
+	 * need a complete slot reset: we don't trust any other reset.
+	 *
+	 * Now, we go through each AFU:
+	 *  - We send the driver, if bound, an error_detected callback.
+	 *    We expect it to clean up, but it can also tell us to give
+	 *    up and permanently detach the card. To simplify things, if
+	 *    any bound AFU driver doesn't support EEH, we give up on EEH.
+	 *
+	 *  - We detach all contexts associated with the AFU. This
+	 *    does not free them, but puts them into a CLOSED state
+	 *    which causes any the associated files to return useful
+	 *    errors to userland. It also unmaps, but does not free,
+	 *    any IRQs.
+	 *
+	 *  - We clean up our side: releasing and unmapping resources we hold
+	 *    so we can wire them up again when the hardware comes back up.
+	 *
+	 * Driver authors should note:
+	 *
+	 *  - Any contexts you create in your kernel driver (except
+	 *    those associated with anonymous file descriptors) are
+	 *    your responsibility to free and recreate. Likewise with
+	 *    any attached resources.
+	 *
+	 *  - We will take responsibility for re-initialising the
+	 *    device context (the one set up for you in
+	 *    cxl_pci_enable_device_hook and accessed through
+	 *    cxl_get_context). If you've attached IRQs or other
+	 *    resources to it, they remains yours to free.
+	 *
+	 * You can call the same functions to release resources as you
+	 * normally would: we make sure that these functions continue
+	 * to work when the hardware is down.
+	 *
+	 * Two examples:
+	 *
+	 * 1) If you normally free all your resources at the end of
+	 *    each request, or if you use anonymous FDs, your
+	 *    error_detected callback can simply set a flag to tell
+	 *    your driver not to start any new calls. You can then
+	 *    clear the flag in the resume callback.
+	 *
+	 * 2) If you normally allocate your resources on startup:
+	 *     * Set a flag in error_detected as above.
+	 *     * Let CXL detach your contexts.
+	 *     * In slot_reset, free the old resources and allocate new ones.
+	 *     * In resume, clear the flag to allow things to start.
+	 */
+	for (i = 0; i < adapter->slices; i++) {
+		afu = adapter->afu[i];
+
+		result = cxl_vphb_error_detected(afu, state);
+
+		/* Only continue if everyone agrees on NEED_RESET */
+		if (result != PCI_ERS_RESULT_NEED_RESET)
+			return result;
+
+		cxl_context_detach_all(afu);
+		cxl_afu_deactivate_mode(afu);
+		cxl_deconfigure_afu(afu);
+	}
+	cxl_deconfigure_adapter(adapter);
+
+	return result;
+}
+
+static pci_ers_result_t cxl_pci_slot_reset(struct pci_dev *pdev)
+{
+	struct cxl *adapter = pci_get_drvdata(pdev);
+	struct cxl_afu *afu;
+	struct cxl_context *ctx;
+	struct pci_dev *afu_dev;
+	pci_ers_result_t afu_result = PCI_ERS_RESULT_RECOVERED;
+	pci_ers_result_t result = PCI_ERS_RESULT_RECOVERED;
+	int i;
+
+	if (cxl_configure_adapter(adapter, pdev))
+		goto err;
+
+	for (i = 0; i < adapter->slices; i++) {
+		afu = adapter->afu[i];
+
+		if (cxl_configure_afu(afu, adapter, pdev))
+			goto err;
+
+		if (cxl_afu_select_best_mode(afu))
+			goto err;
+
+		cxl_pci_vphb_reconfigure(afu);
+
+		list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
+			/* Reset the device context.
+			 * TODO: make this less disruptive
+			 */
+			ctx = cxl_get_context(afu_dev);
+
+			if (ctx && cxl_release_context(ctx))
+				goto err;
+
+			ctx = cxl_dev_context_init(afu_dev);
+			if (!ctx)
+				goto err;
+
+			afu_dev->dev.archdata.cxl_ctx = ctx;
+
+			if (cxl_afu_check_and_enable(afu))
+				goto err;
+
+			afu_dev->error_state = pci_channel_io_normal;
+
+			/* If there's a driver attached, allow it to
+			 * chime in on recovery. Drivers should check
+			 * if everything has come back OK, but
+			 * shouldn't start new work until we call
+			 * their resume function.
+			 */
+			if (!afu_dev->driver)
+				continue;
+
+			if (afu_dev->driver->err_handler &&
+			    afu_dev->driver->err_handler->slot_reset)
+				afu_result = afu_dev->driver->err_handler->slot_reset(afu_dev);
+
+			if (afu_result == PCI_ERS_RESULT_DISCONNECT)
+				result = PCI_ERS_RESULT_DISCONNECT;
+		}
+	}
+	return result;
+
+err:
+	/* All the bits that happen in both error_detected and cxl_remove
+	 * should be idempotent, so we don't need to worry about leaving a mix
+	 * of unconfigured and reconfigured resources.
+	 */
+	dev_err(&pdev->dev, "EEH recovery failed. Asking to be disconnected.\n");
+	return PCI_ERS_RESULT_DISCONNECT;
+}
+
+static void cxl_pci_resume(struct pci_dev *pdev)
+{
+	struct cxl *adapter = pci_get_drvdata(pdev);
+	struct cxl_afu *afu;
+	struct pci_dev *afu_dev;
+	int i;
+
+	/* Everything is back now. Drivers should restart work now.
+	 * This is not the place to be checking if everything came back up
+	 * properly, because there's no return value: do that in slot_reset.
+	 */
+	for (i = 0; i < adapter->slices; i++) {
+		afu = adapter->afu[i];
+
+		list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
+			if (afu_dev->driver && afu_dev->driver->err_handler &&
+			    afu_dev->driver->err_handler->resume)
+				afu_dev->driver->err_handler->resume(afu_dev);
+		}
+	}
+}
+
+static const struct pci_error_handlers cxl_err_handler = {
+	.error_detected = cxl_pci_error_detected,
+	.slot_reset = cxl_pci_slot_reset,
+	.resume = cxl_pci_resume,
+};
+
 struct pci_driver cxl_pci_driver = {
 	.name = "cxl-pci",
 	.id_table = cxl_pci_tbl,
 	.probe = cxl_probe,
 	.remove = cxl_remove,
 	.shutdown = cxl_remove,
+	.err_handler = &cxl_err_handler,
 };
diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c
index 2930911c1e42..6dd16a6d153f 100644
--- a/drivers/misc/cxl/vphb.c
+++ b/drivers/misc/cxl/vphb.c
@@ -266,6 +266,14 @@ int cxl_pci_vphb_add(struct cxl_afu *afu)
 	return 0;
 }
 
+void cxl_pci_vphb_reconfigure(struct cxl_afu *afu)
+{
+	/* When we are reconfigured, the AFU's MMIO space is unmapped
+	 * and remapped. We need to reflect this in the PHB's view of
+	 * the world.
+	 */
+	afu->phb->cfg_addr = afu->afu_desc_mmio + afu->crs_offset;
+}
 
 void cxl_pci_vphb_remove(struct cxl_afu *afu)
 {
-- 
2.1.4

[PATCH v5 11/11] cxl: Add CONFIG_CXL_EEH symbol

[Daniel Axtens]

CONFIG_CXL_EEH is for CXL's EEH related code.

Other drivers can depend on or #ifdef on this symbol to configure
PERST behaviour, allowing CXL to participate in the EEH process.

Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
---
 drivers/misc/cxl/Kconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/misc/cxl/Kconfig b/drivers/misc/cxl/Kconfig
index b6db9ebd52c2..c151fc1fe14c 100644
--- a/drivers/misc/cxl/Kconfig
+++ b/drivers/misc/cxl/Kconfig
@@ -11,11 +11,17 @@ config CXL_KERNEL_API
 	bool
 	default n
 
+config CXL_EEH
+	bool
+	default n
+	select EEH
+
 config CXL
 	tristate "Support for IBM Coherent Accelerators (CXL)"
 	depends on PPC_POWERNV && PCI_MSI
 	select CXL_BASE
 	select CXL_KERNEL_API
+	select CXL_EEH
 	default m
 	help
 	  Select this option to enable driver support for IBM Coherent
-- 
2.1.4

Re: [PATCH v5 11/11] cxl: Add CONFIG_CXL_EEH symbol

[Michael Ellerman]

On Fri, 2015-08-14 at 17:41 +1000, Daniel Axtens wrote:
> CONFIG_CXL_EEH is for CXL's EEH related code.
> 
> Other drivers can depend on or #ifdef on this symbol to configure
> PERST behaviour, allowing CXL to participate in the EEH process.
> 
> Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
> Signed-off-by: Daniel Axtens <dja@axtens.net>
> ---
>  drivers/misc/cxl/Kconfig | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/misc/cxl/Kconfig b/drivers/misc/cxl/Kconfig
> index b6db9ebd52c2..c151fc1fe14c 100644
> --- a/drivers/misc/cxl/Kconfig
> +++ b/drivers/misc/cxl/Kconfig
> @@ -11,11 +11,17 @@ config CXL_KERNEL_API
>  	bool
>  	default n
>  
> +config CXL_EEH
> +	bool
> +	default n
> +	select EEH

I'd rather we didn't have select EEH here, instead ..

>  config CXL
>  	tristate "Support for IBM Coherent Accelerators (CXL)"
>  	depends on PPC_POWERNV && PCI_MSI

It should be a dependency here.

In practice it won't make any difference with the current way the options are
defined, but I think it's the right way to do it.

I'm happy to fix it up if you're OK with it.

>  	select CXL_BASE
>  	select CXL_KERNEL_API
> +	select CXL_EEH
>  	default m
>  	help
>  	  Select this option to enable driver support for IBM Coherent


cheers

Re: [PATCH v5 11/11] cxl: Add CONFIG_CXL_EEH symbol

[Daniel Axtens]

[-- Attachment #1: Type: text/plain, Size: 499 bytes --]

Hi Michael,

> I'd rather we didn't have select EEH here, instead ..
> 
> >  config CXL
> >  	tristate "Support for IBM Coherent Accelerators (CXL)"
> >  	depends on PPC_POWERNV && PCI_MSI
> 
> It should be a dependency here.
> 
> In practice it won't make any difference with the current way the options are
> defined, but I think it's the right way to do it.
> 
> I'm happy to fix it up if you're OK with it.
> 

That's sounds fine to me. Thanks heaps!


-- 
Regards,
Daniel

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 860 bytes --]

Re: [PATCH v5 01/11] cxl: Convert MMIO read/write macros to inline functions

[Ian Munsie]

Acked-by: Ian Munsie <imunsie@au1.ibm.com>

Re: [PATCH v5 02/11] cxl: Drop commands if the PCI channel is not in normal state

[Ian Munsie]

Acked-by: Ian Munsie <imunsie@au1.ibm.com>

Re: [PATCH v5 03/11] cxl: Allocate and release the SPA with the AFU

[Ian Munsie]

Acked-by: Ian Munsie <imunsie@au1.ibm.com>

Re: [PATCH v5 04/11] cxl: Make IRQ release idempotent

[Ian Munsie]

Acked-by: Ian Munsie <imunsie@au1.ibm.com>

Re: [PATCH v5 05/11] cxl: Clean up adapter MMIO unmap path.

[Ian Munsie]

Acked-by: Ian Munsie <imunsie@au1.ibm.com>

Re: [PATCH v5 06/11] cxl: Refactor adaptor init/teardown

[Ian Munsie]

Thanks for splitting this out - much easier to follow now :)

Acked-by: Ian Munsie <imunsie@au1.ibm.com>

Re: [PATCH v5 07/11] cxl: Refactor AFU init/teardown

[Ian Munsie]

Thanks :)

Acked-by: Ian Munsie <imunsie@au1.ibm.com>

Re: [PATCH v5 08/11] cxl: Don't remove AFUs/vPHBs in cxl_reset

[Ian Munsie]

Acked-by: Ian Munsie <imunsie@au1.ibm.com>

Re: [PATCH v5 09/11] cxl: Allow the kernel to trust that an image won't change on PERST.

[Ian Munsie]

Acked-by: Ian Munsie <imunsie@au1.ibm.com>

Re: [PATCH v5 10/11] cxl: EEH support

[Ian Munsie]

Acked-by: Ian Munsie <imunsie@au1.ibm.com>

Re: [PATCH v5 11/11] cxl: Add CONFIG_CXL_EEH symbol

[Ian Munsie]

Acked-by: Ian Munsie <imunsie@au1.ibm.com>

Re: [v5, 01/11] cxl: Convert MMIO read/write macros to inline functions

[Michael Ellerman]

On Fri, 2015-14-08 at 07:41:17 UTC, Daniel Axtens wrote:
> We're about to make these more complex, so make them functions
> first.
> 
> Signed-off-by: Daniel Axtens <dja@axtens.net>

Series applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/588b34be20bc3dd7441c

cheers