* [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master
@ 2015-08-21 13:25 Andreas Bießmann
2015-08-21 13:36 ` Andreas Bießmann
0 siblings, 1 reply; 6+ messages in thread
From: Andreas Bießmann @ 2015-08-21 13:25 UTC (permalink / raw)
To: u-boot
The following changes since commit 8d77576371381ade83de475bb639949b44941e8c:
ARM: davinci: remove support for cam_enc_4xx (2015-08-20 12:55:50 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 6e119bc25a27700b71a6340f9c7cd5382d9c6649:
ARM: at91: sama5: update the spi flash mapping (2015-08-21 15:15:28 +0200)
----------------------------------------------------------------
Erik van Luijk (4):
arm: at91: mpddr: allow multiple DDR controllers
arm: at91: at91sam9m10g45ek/corvus remove useless chip select 1 init
arm: at91: pmc: replace the constant with a define in at91_pmc.h
arm: at91: add support for mini-box picosam9g45 board
Heiko Schocher (2):
arm, at91: add axm extensions
taurus: board updates
Wu, Josh (4):
ARM: at91: sama5: move the sd/mmc env config to at91-sama5_common.h
ARM: at91: sama5d3xek: use a $dtb_name to load dtb
ARM: at91: sama5: move the nandflash env config to at91-sama5_common.h
ARM: at91: sama5: update the spi flash mapping
arch/arm/include/asm/mach-types.h | 1 +
arch/arm/mach-at91/Kconfig | 6 +
arch/arm/mach-at91/include/mach/at91_pmc.h | 1 +
arch/arm/mach-at91/include/mach/atmel_mpddrc.h | 6 +-
arch/arm/mach-at91/mpddrc.c | 41 +--
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 12 +-
board/atmel/at91sam9n12ek/at91sam9n12ek.c | 4 +-
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 4 +-
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 4 +-
board/atmel/sama5d3xek/sama5d3xek.c | 24 +-
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 4 +-
board/atmel/sama5d4ek/sama5d4ek.c | 4 +-
board/mini-box/picosam9g45/Kconfig | 12 +
board/mini-box/picosam9g45/MAINTAINERS | 6 +
board/mini-box/picosam9g45/Makefile | 19 ++
board/mini-box/picosam9g45/led.c | 25 ++
board/mini-box/picosam9g45/picosam9g45.c | 354 ++++++++++++++++++++++++
board/siemens/corvus/board.c | 12 +-
board/siemens/taurus/taurus.c | 202 ++++++++++++--
configs/picosam9g45_defconfig | 12 +
include/configs/at91-sama5_common.h | 37 +++
include/configs/at91sam9m10g45ek.h | 1 -
include/configs/at91sam9n12ek.h | 2 -
include/configs/at91sam9x5ek.h | 2 -
include/configs/corvus.h | 2 -
include/configs/picosam9g45.h | 211 ++++++++++++++
include/configs/sama5d3_xplained.h | 19 +-
include/configs/sama5d3xek.h | 33 +--
include/configs/sama5d4_xplained.h | 41 +--
include/configs/sama5d4ek.h | 39 +--
include/configs/taurus.h | 79 +++++-
31 files changed, 1019 insertions(+), 200 deletions(-)
create mode 100644 board/mini-box/picosam9g45/Kconfig
create mode 100644 board/mini-box/picosam9g45/MAINTAINERS
create mode 100644 board/mini-box/picosam9g45/Makefile
create mode 100644 board/mini-box/picosam9g45/led.c
create mode 100644 board/mini-box/picosam9g45/picosam9g45.c
create mode 100644 configs/picosam9g45_defconfig
create mode 100644 include/configs/picosam9g45.h
^ permalink raw reply [flat|nested] 6+ messages in thread* [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master
2015-08-21 13:25 [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master Andreas Bießmann
@ 2015-08-21 13:36 ` Andreas Bießmann
2015-08-21 13:51 ` [U-Boot] [PULL v2] " Andreas Bießmann
0 siblings, 1 reply; 6+ messages in thread
From: Andreas Bießmann @ 2015-08-21 13:36 UTC (permalink / raw)
To: u-boot
Sorry Tom,
On 08/21/2015 03:25 PM, Andreas Bie?mann wrote:
> The following changes since commit 8d77576371381ade83de475bb639949b44941e8c:
>
> ARM: davinci: remove support for cam_enc_4xx (2015-08-20 12:55:50 -0400)
>
there slipped one wrong commit in. Please forget this PR!
Andreas
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 6e119bc25a27700b71a6340f9c7cd5382d9c6649:
>
> ARM: at91: sama5: update the spi flash mapping (2015-08-21 15:15:28 +0200)
>
> ----------------------------------------------------------------
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PULL v2] u-boot-atmel/master -> u-boot/master
2015-08-21 13:36 ` Andreas Bießmann
@ 2015-08-21 13:51 ` Andreas Bießmann
2015-08-24 13:44 ` Tom Rini
0 siblings, 1 reply; 6+ messages in thread
From: Andreas Bießmann @ 2015-08-21 13:51 UTC (permalink / raw)
To: u-boot
Hi Tom,
this is the corrected PR.
Andreas
The following changes since commit 8d77576371381ade83de475bb639949b44941e8c:
ARM: davinci: remove support for cam_enc_4xx (2015-08-20 12:55:50 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 7a53b9544e388ac80bff2a3912865df029de27d0:
ARM: at91: sama5: update the spi flash mapping (2015-08-21 15:47:05 +0200)
----------------------------------------------------------------
Erik van Luijk (4):
arm: at91: mpddr: allow multiple DDR controllers
arm: at91: at91sam9m10g45ek/corvus remove useless chip select 1 init
arm: at91: pmc: replace the constant with a define in at91_pmc.h
arm: at91: add support for mini-box picosam9g45 board
Wu, Josh (4):
ARM: at91: sama5: move the sd/mmc env config to at91-sama5_common.h
ARM: at91: sama5d3xek: use a $dtb_name to load dtb
ARM: at91: sama5: move the nandflash env config to at91-sama5_common.h
ARM: at91: sama5: update the spi flash mapping
arch/arm/include/asm/mach-types.h | 1 +
arch/arm/mach-at91/Kconfig | 6 +
arch/arm/mach-at91/include/mach/at91_pmc.h | 1 +
arch/arm/mach-at91/include/mach/atmel_mpddrc.h | 6 +-
arch/arm/mach-at91/mpddrc.c | 41 +--
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 12 +-
board/atmel/at91sam9n12ek/at91sam9n12ek.c | 4 +-
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 4 +-
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 4 +-
board/atmel/sama5d3xek/sama5d3xek.c | 24 +-
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 4 +-
board/atmel/sama5d4ek/sama5d4ek.c | 4 +-
board/mini-box/picosam9g45/Kconfig | 12 +
board/mini-box/picosam9g45/MAINTAINERS | 6 +
board/mini-box/picosam9g45/Makefile | 19 ++
board/mini-box/picosam9g45/led.c | 25 ++
board/mini-box/picosam9g45/picosam9g45.c | 354 ++++++++++++++++++++++++
board/siemens/corvus/board.c | 12 +-
configs/picosam9g45_defconfig | 12 +
include/configs/at91-sama5_common.h | 37 +++
include/configs/at91sam9m10g45ek.h | 1 -
include/configs/at91sam9n12ek.h | 2 -
include/configs/at91sam9x5ek.h | 2 -
include/configs/corvus.h | 2 -
include/configs/picosam9g45.h | 211 ++++++++++++++
include/configs/sama5d3_xplained.h | 19 +-
include/configs/sama5d3xek.h | 33 +--
include/configs/sama5d4_xplained.h | 41 +--
include/configs/sama5d4ek.h | 39 +--
29 files changed, 763 insertions(+), 175 deletions(-)
create mode 100644 board/mini-box/picosam9g45/Kconfig
create mode 100644 board/mini-box/picosam9g45/MAINTAINERS
create mode 100644 board/mini-box/picosam9g45/Makefile
create mode 100644 board/mini-box/picosam9g45/led.c
create mode 100644 board/mini-box/picosam9g45/picosam9g45.c
create mode 100644 configs/picosam9g45_defconfig
create mode 100644 include/configs/picosam9g45.h
^ permalink raw reply [flat|nested] 6+ messages in thread* [U-Boot] [PULL v2] u-boot-atmel/master -> u-boot/master
2015-08-21 13:51 ` [U-Boot] [PULL v2] " Andreas Bießmann
@ 2015-08-24 13:44 ` Tom Rini
0 siblings, 0 replies; 6+ messages in thread
From: Tom Rini @ 2015-08-24 13:44 UTC (permalink / raw)
To: u-boot
On Fri, Aug 21, 2015 at 03:51:05PM +0200, Andreas Bie?mann wrote:
> Hi Tom,
>
> this is the corrected PR.
>
> Andreas
>
> The following changes since commit 8d77576371381ade83de475bb639949b44941e8c:
>
> ARM: davinci: remove support for cam_enc_4xx (2015-08-20 12:55:50 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 7a53b9544e388ac80bff2a3912865df029de27d0:
>
> ARM: at91: sama5: update the spi flash mapping (2015-08-21 15:47:05 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150824/7a02efaf/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master
@ 2016-02-19 13:00 Andreas Bießmann
2016-02-20 20:54 ` [U-Boot] [PULL v2] " Andreas Bießmann
0 siblings, 1 reply; 6+ messages in thread
From: Andreas Bießmann @ 2016-02-19 13:00 UTC (permalink / raw)
To: u-boot
Hi Tom,
there is another issue in this PR. Please drop it, I'll send another one
shortly.
Andreas
On 18.02.2016 22:34, Andreas Bie?mann wrote:
> Hi Tom,
>
> Please pull into u-boot/master.
>
> buildman for arm has a warning in one patch which is repaired some patches
> later in this pull. I think this is Ok since it is an unused variable warning
> for some boards which do not declare a specific define. The later patch will
> remove the warning line completely.
>
> Andreas
>
> The following changes since commit 727a25b2418031e1b94ba603e0eb61657024091b:
>
> Prepare v2016.03-rc2 (2016-02-15 21:44:30 +0000)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to bb21ae82b27aa51254f32f0238d3bf60874646dd:
>
> ARM: Add Support for the VInCo platform (2016-02-18 21:46:20 +0100)
>
> ----------------------------------------------------------------
> Gregory CLEMENT (1):
> ARM: Add Support for the VInCo platform
>
> Marek Vasut (1):
> arm: at91: Add support for DENX MA5D4 SoM and EVK
>
> Matthias Michel (1):
> siemens,at91: enable features for smartweb
>
> Samuel Mescoff (1):
> ARM: at91: sama5d2: configure the L2 cache memory
>
> Wenyou Yang (15):
> ARM: at91: asm/at91_pmc.h: fix trival register offset
> ARM: at91: clock: add a new file to handle clock
> ARM: cpu: at91: clean up peripheral clock code
> board: atmel: clean up peripheral clock code
> drivers: at91: clean up peripheral clock code
> ARM: at91: clock: add UTMI PLL enable/disable function
> ARM: at91: armv7: clean up UTMI PLL handle code
> drivers: usb: atmel: clean up the UTMI PLL code
> board: atmel: siemens: clean up UTMI PLL code
> ARM: at91: clock: add PLLB enable/disable functions
> drivers: usb: ohci-at91: clean up the PLLB code
> board: atmel: siemens: clean up PLLB code
> ARM: at91: clock: add PMC_PLLICPR init function
> ARM: at91: clean up the PMC_PLLICPR init code
> board: atmel: clean up the PMC_PLLICPR init code
>
> arch/arm/mach-at91/Kconfig | 12 +
> arch/arm/mach-at91/Makefile | 1 +
> arch/arm/mach-at91/arm920t/at91rm9200_devices.c | 14 +-
> arch/arm/mach-at91/arm920t/clock.c | 38 ++
> arch/arm/mach-at91/arm920t/timer.c | 6 +-
> arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c | 36 +-
> arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c | 28 +-
> arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c | 37 +-
> .../mach-at91/arm926ejs/at91sam9m10g45_devices.c | 33 +-
> arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c | 40 +-
> arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c | 28 +-
> arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c | 38 +-
> arch/arm/mach-at91/arm926ejs/clock.c | 37 +-
> arch/arm/mach-at91/arm926ejs/cpu.c | 1 -
> arch/arm/mach-at91/arm926ejs/timer.c | 5 +-
> arch/arm/mach-at91/armv7/clock.c | 26 --
> arch/arm/mach-at91/armv7/cpu.c | 1 -
> arch/arm/mach-at91/armv7/sama5d2_devices.c | 5 +-
> arch/arm/mach-at91/armv7/sama5d3_devices.c | 5 +-
> arch/arm/mach-at91/armv7/sama5d4_devices.c | 5 +-
> arch/arm/mach-at91/armv7/timer.c | 1 -
> arch/arm/mach-at91/atmel_sfr.c | 7 +
> arch/arm/mach-at91/clock.c | 121 ++++++
> arch/arm/mach-at91/include/mach/at91_common.h | 1 +
> arch/arm/mach-at91/include/mach/at91_pmc.h | 15 +-
> arch/arm/mach-at91/include/mach/clk.h | 8 +
> arch/arm/mach-at91/include/mach/sama5_sfr.h | 1 +
> arch/arm/mach-at91/phy.c | 1 -
> arch/arm/mach-at91/sdram.c | 1 -
> arch/arm/mach-at91/spl_at91.c | 5 +-
> arch/arm/mach-at91/spl_atmel.c | 4 +
> board/atmel/at91rm9200ek/at91rm9200ek.c | 1 -
> board/atmel/at91rm9200ek/led.c | 6 +-
> board/atmel/at91sam9260ek/at91sam9260ek.c | 15 +-
> board/atmel/at91sam9261ek/at91sam9261ek.c | 8 +-
> board/atmel/at91sam9261ek/led.c | 6 +-
> board/atmel/at91sam9263ek/at91sam9263ek.c | 23 +-
> board/atmel/at91sam9263ek/led.c | 9 +-
> board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 20 +-
> board/atmel/at91sam9m10g45ek/led.c | 7 +-
> board/atmel/at91sam9n12ek/at91sam9n12ek.c | 6 +-
> board/atmel/at91sam9rlek/at91sam9rlek.c | 18 +-
> board/atmel/at91sam9rlek/led.c | 7 +-
> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 10 +-
> board/atmel/sama5d2_xplained/sama5d2_xplained.c | 1 -
> board/atmel/sama5d3_xplained/sama5d3_xplained.c | 9 +-
> board/atmel/sama5d3xek/sama5d3xek.c | 9 +-
> board/atmel/sama5d4_xplained/sama5d4_xplained.c | 9 +-
> board/atmel/sama5d4ek/sama5d4ek.c | 9 +-
> board/bluewater/snapper9260/snapper9260.c | 15 +-
> board/calao/usb_a9263/usb_a9263.c | 11 +-
> board/denx/ma5d4evk/Kconfig | 12 +
> board/denx/ma5d4evk/MAINTAINERS | 6 +
> board/denx/ma5d4evk/Makefile | 7 +
> board/denx/ma5d4evk/ma5d4evk.c | 412 +++++++++++++++++++++
> board/egnite/ethernut5/ethernut5.c | 20 +-
> board/esd/meesc/meesc.c | 15 +-
> board/l+g/vinco/Kconfig | 12 +
> board/l+g/vinco/Makefile | 1 +
> board/l+g/vinco/vinco.c | 212 +++++++++++
> board/mini-box/picosam9g45/led.c | 7 +-
> board/mini-box/picosam9g45/picosam9g45.c | 17 +-
> board/ronetix/pm9261/led.c | 7 +-
> board/ronetix/pm9261/pm9261.c | 22 +-
> board/ronetix/pm9263/led.c | 7 +-
> board/ronetix/pm9263/pm9263.c | 19 +-
> board/ronetix/pm9g45/pm9g45.c | 20 +-
> board/siemens/corvus/board.c | 10 +-
> board/siemens/smartweb/smartweb.c | 9 +-
> board/siemens/taurus/taurus.c | 9 +-
> configs/ma5d4evk_defconfig | 11 +
> configs/smartweb_defconfig | 5 +-
> configs/vinco_defconfig | 13 +
> drivers/net/at91_emac.c | 10 +-
> drivers/usb/host/ehci-atmel.c | 46 +--
> drivers/usb/host/ohci-at91.c | 64 +---
> include/configs/ma5d4evk.h | 255 +++++++++++++
> include/configs/smartweb.h | 14 +-
> include/configs/vinco.h | 168 +++++++++
> 79 files changed, 1568 insertions(+), 602 deletions(-)
> create mode 100644 arch/arm/mach-at91/clock.c
> create mode 100644 board/denx/ma5d4evk/Kconfig
> create mode 100644 board/denx/ma5d4evk/MAINTAINERS
> create mode 100644 board/denx/ma5d4evk/Makefile
> create mode 100644 board/denx/ma5d4evk/ma5d4evk.c
> create mode 100644 board/l+g/vinco/Kconfig
> create mode 100644 board/l+g/vinco/Makefile
> create mode 100644 board/l+g/vinco/vinco.c
> create mode 100644 configs/ma5d4evk_defconfig
> create mode 100644 configs/vinco_defconfig
> create mode 100644 include/configs/ma5d4evk.h
> create mode 100644 include/configs/vinco.h
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PULL v2] u-boot-atmel/master -> u-boot/master
2016-02-19 13:00 [U-Boot] [PULL] " Andreas Bießmann
@ 2016-02-20 20:54 ` Andreas Bießmann
2016-02-21 1:44 ` Tom Rini
0 siblings, 1 reply; 6+ messages in thread
From: Andreas Bießmann @ 2016-02-20 20:54 UTC (permalink / raw)
To: u-boot
Hi Tom,
here is the repaired PR for atmel patches. Please pull into u-boot/master.
Andreas
The following changes since commit 727a25b2418031e1b94ba603e0eb61657024091b:
Prepare v2016.03-rc2 (2016-02-15 21:44:30 +0000)
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git master
for you to fetch changes up to 2a0b9ea3067b00366455b0504056cb6728a0b865:
vinco: add Maintainers file (2016-02-20 21:40:02 +0100)
----------------------------------------------------------------
Andreas Bie?mann (1):
vinco: add Maintainers file
Gregory CLEMENT (1):
ARM: Add Support for the VInCo platform
Marek Vasut (1):
arm: at91: Add support for DENX MA5D4 SoM and EVK
Matthias Michel (1):
siemens,at91: enable features for smartweb
Samuel Mescoff (1):
ARM: at91: sama5d2: configure the L2 cache memory
Wenyou Yang (15):
ARM: at91: asm/at91_pmc.h: fix trival register offset
ARM: at91: clock: add a new file to handle clock
ARM: cpu: at91: clean up peripheral clock code
board: atmel: clean up peripheral clock code
drivers: at91: clean up peripheral clock code
ARM: at91: clock: add UTMI PLL enable/disable function
ARM: at91: armv7: clean up UTMI PLL handle code
drivers: usb: atmel: clean up the UTMI PLL code
board: atmel: siemens: clean up UTMI PLL code
ARM: at91: clock: add PLLB enable/disable functions
drivers: usb: ohci-at91: clean up the PLLB code
board: atmel: siemens: clean up PLLB code
ARM: at91: clock: add PMC_PLLICPR init function
ARM: at91: clean up the PMC_PLLICPR init code
board: atmel: clean up the PMC_PLLICPR init code
arch/arm/mach-at91/Kconfig | 12 +
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/arm920t/at91rm9200_devices.c | 14 +-
arch/arm/mach-at91/arm920t/clock.c | 38 ++
arch/arm/mach-at91/arm920t/timer.c | 6 +-
arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c | 36 +-
arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c | 28 +-
arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c | 37 +-
.../mach-at91/arm926ejs/at91sam9m10g45_devices.c | 33 +-
arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c | 40 +-
arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c | 28 +-
arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c | 38 +-
arch/arm/mach-at91/arm926ejs/clock.c | 37 +-
arch/arm/mach-at91/arm926ejs/cpu.c | 1 -
arch/arm/mach-at91/arm926ejs/timer.c | 5 +-
arch/arm/mach-at91/armv7/clock.c | 26 --
arch/arm/mach-at91/armv7/cpu.c | 1 -
arch/arm/mach-at91/armv7/sama5d2_devices.c | 5 +-
arch/arm/mach-at91/armv7/sama5d3_devices.c | 5 +-
arch/arm/mach-at91/armv7/sama5d4_devices.c | 5 +-
arch/arm/mach-at91/armv7/timer.c | 1 -
arch/arm/mach-at91/atmel_sfr.c | 7 +
arch/arm/mach-at91/clock.c | 121 ++++++
arch/arm/mach-at91/include/mach/at91_common.h | 1 +
arch/arm/mach-at91/include/mach/at91_pmc.h | 15 +-
arch/arm/mach-at91/include/mach/clk.h | 8 +
arch/arm/mach-at91/include/mach/sama5_sfr.h | 1 +
arch/arm/mach-at91/phy.c | 1 -
arch/arm/mach-at91/sdram.c | 1 -
arch/arm/mach-at91/spl_at91.c | 5 +-
arch/arm/mach-at91/spl_atmel.c | 4 +
board/atmel/at91rm9200ek/at91rm9200ek.c | 1 -
board/atmel/at91rm9200ek/led.c | 6 +-
board/atmel/at91sam9260ek/at91sam9260ek.c | 15 +-
board/atmel/at91sam9261ek/at91sam9261ek.c | 8 +-
board/atmel/at91sam9261ek/led.c | 6 +-
board/atmel/at91sam9263ek/at91sam9263ek.c | 23 +-
board/atmel/at91sam9263ek/led.c | 9 +-
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 20 +-
board/atmel/at91sam9m10g45ek/led.c | 7 +-
board/atmel/at91sam9n12ek/at91sam9n12ek.c | 6 +-
board/atmel/at91sam9rlek/at91sam9rlek.c | 18 +-
board/atmel/at91sam9rlek/led.c | 7 +-
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 10 +-
board/atmel/sama5d2_xplained/sama5d2_xplained.c | 1 -
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 9 +-
board/atmel/sama5d3xek/sama5d3xek.c | 9 +-
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 9 +-
board/atmel/sama5d4ek/sama5d4ek.c | 9 +-
board/bluewater/snapper9260/snapper9260.c | 15 +-
board/calao/usb_a9263/usb_a9263.c | 11 +-
board/denx/ma5d4evk/Kconfig | 12 +
board/denx/ma5d4evk/MAINTAINERS | 6 +
board/denx/ma5d4evk/Makefile | 7 +
board/denx/ma5d4evk/ma5d4evk.c | 412 +++++++++++++++++++++
board/egnite/ethernut5/ethernut5.c | 20 +-
board/esd/meesc/meesc.c | 15 +-
board/l+g/vinco/Kconfig | 12 +
board/l+g/vinco/MAINTAINERS | 6 +
board/l+g/vinco/Makefile | 1 +
board/l+g/vinco/vinco.c | 212 +++++++++++
board/mini-box/picosam9g45/led.c | 7 +-
board/mini-box/picosam9g45/picosam9g45.c | 17 +-
board/ronetix/pm9261/led.c | 7 +-
board/ronetix/pm9261/pm9261.c | 22 +-
board/ronetix/pm9263/led.c | 7 +-
board/ronetix/pm9263/pm9263.c | 19 +-
board/ronetix/pm9g45/pm9g45.c | 20 +-
board/siemens/corvus/board.c | 10 +-
board/siemens/smartweb/smartweb.c | 9 +-
board/siemens/taurus/taurus.c | 9 +-
configs/ma5d4evk_defconfig | 11 +
configs/smartweb_defconfig | 5 +-
configs/vinco_defconfig | 13 +
drivers/net/at91_emac.c | 10 +-
drivers/usb/host/ehci-atmel.c | 46 +--
drivers/usb/host/ohci-at91.c | 64 +---
include/configs/ma5d4evk.h | 255 +++++++++++++
include/configs/smartweb.h | 14 +-
include/configs/vinco.h | 167 +++++++++
80 files changed, 1573 insertions(+), 602 deletions(-)
create mode 100644 arch/arm/mach-at91/clock.c
create mode 100644 board/denx/ma5d4evk/Kconfig
create mode 100644 board/denx/ma5d4evk/MAINTAINERS
create mode 100644 board/denx/ma5d4evk/Makefile
create mode 100644 board/denx/ma5d4evk/ma5d4evk.c
create mode 100644 board/l+g/vinco/Kconfig
create mode 100644 board/l+g/vinco/MAINTAINERS
create mode 100644 board/l+g/vinco/Makefile
create mode 100644 board/l+g/vinco/vinco.c
create mode 100644 configs/ma5d4evk_defconfig
create mode 100644 configs/vinco_defconfig
create mode 100644 include/configs/ma5d4evk.h
create mode 100644 include/configs/vinco.h
^ permalink raw reply [flat|nested] 6+ messages in thread* [U-Boot] [PULL v2] u-boot-atmel/master -> u-boot/master
2016-02-20 20:54 ` [U-Boot] [PULL v2] " Andreas Bießmann
@ 2016-02-21 1:44 ` Tom Rini
0 siblings, 0 replies; 6+ messages in thread
From: Tom Rini @ 2016-02-21 1:44 UTC (permalink / raw)
To: u-boot
On Sat, Feb 20, 2016 at 09:54:49PM +0100, Andreas Bie?mann wrote:
> Hi Tom,
>
> here is the repaired PR for atmel patches. Please pull into u-boot/master.
>
> Andreas
>
> The following changes since commit 727a25b2418031e1b94ba603e0eb61657024091b:
>
> Prepare v2016.03-rc2 (2016-02-15 21:44:30 +0000)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-atmel.git master
>
> for you to fetch changes up to 2a0b9ea3067b00366455b0504056cb6728a0b865:
>
> vinco: add Maintainers file (2016-02-20 21:40:02 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160220/7163716f/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-02-21 1:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-08-21 13:25 [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master Andreas Bießmann
2015-08-21 13:36 ` Andreas Bießmann
2015-08-21 13:51 ` [U-Boot] [PULL v2] " Andreas Bießmann
2015-08-24 13:44 ` Tom Rini
2016-02-19 13:00 [U-Boot] [PULL] " Andreas Bießmann
2016-02-20 20:54 ` [U-Boot] [PULL v2] " Andreas Bießmann
2016-02-21 1:44 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.