* [PATCH v10 04/07] arm64: renesas: r8a7795 dtsi: Add all SCIF nodes
@ 2015-10-02 2:55 Magnus Damm
2015-10-02 7:11 ` Geert Uytterhoeven
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Magnus Damm @ 2015-10-02 2:55 UTC (permalink / raw)
To: linux-sh
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device nodes for all R-Car H3 SCIF serial ports, incl. clocks,
clock domain, and dma properties.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---
Changes since V9: (Magnus Damm <damm+renesas@opensource.se>)
- Added SCIF2 DMA bits again
- Converted DT nodes for MSTP to MSSR, adjusted r8a7795-clock.h
- Include clock-output-names
Changes since V8: (Magnus Damm <damm+renesas@opensource.se>)
- Dropped SCIF2 DMA bits - thanks Laurent!
- Changed name of mstp2 and mstp3 nodes - thanks Geert!
- Added Acked-by from Laurent
Changes since V7: (Magnus Damm <damm+renesas@opensource.se>)
- Folded together above SCIF2 patches
- Added SCIF2 DMA bits
- Got rid of clock-output-names
- Replaced renesas,clock-indices with clock-indices
Based on:
[PATCH 9/25] arm64: renesas: r8a7795: Add SCIF2 support
[PATCH 1/6] arm64: renesas: r8a7795 dtsi: Mark scif2 disabled
[PATCH 3/6] arm64: renesas: r8a7795 dtsi: Add all SCIF nodes
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 109 +++++++++++++++++++++++++++++
include/dt-bindings/clock/r8a7795-clock.h | 6 +
2 files changed, 115 insertions(+)
--- 0012/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ work/arch/arm64/boot/dts/renesas/r8a7795.dtsi 2015-10-01 22:56:20.800513000 +0900
@@ -231,6 +231,11 @@
};
cpg_clocks: cpg_clocks@e6150000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #clock-cells = <1>;
+ ranges;
+
compatible = "renesas,r8a7795-cpg-clocks",
"renesas,rcar-gen3-cpg-clocks";
reg = <0 0xe6150000 0 0x1000>;
@@ -243,6 +248,38 @@
clock-output-names = "main", "pll0", "pll1",
"pll2", "pll3", "pll4";
#power-domain-cells = <0>;
+
+ /* Module Standby and Software Reset */
+ mssr: mssr@e6150130 {
+ compatible + "renesas,r8a7795-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ #clock-cells = <1>;
+ clocks + /* MSTP2 */
+ <&s3d4_clk>, <&s3d4_clk>,
+ <&s3d4_clk>, <&s3d4_clk>,
+ <&s3d4_clk>,
+ /* MSTP3 */
+ <&s3d4_clk>;
+ clock-indices = <
+ /* MSTP2 */
+ R8A7795_CLK_SCIF5
+ R8A7795_CLK_SCIF4
+ R8A7795_CLK_SCIF3
+ R8A7795_CLK_SCIF1
+ R8A7795_CLK_SCIF0
+ /* MSTP3 */
+ R8A7795_CLK_SCIF2
+ >;
+ clock-output-names + /* MSTP2 */
+ "scif5", "scif4", "scif3",
+ "scif1", "scif0",
+ /* MSTP3 */
+ "scif2";
+ #reset-cells = <1>;
+ };
};
};
@@ -257,5 +294,77 @@
dmac2: dma-controller@e7310000 {
/* Empty node for now */
};
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7795", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mssr R8A7795_CLK_SCIF0>;
+ clock-names = "sci_ick";
+ dmas = <&dmac1 0x51>, <&dmac1 0x50>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7795", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mssr R8A7795_CLK_SCIF1>;
+ clock-names = "sci_ick";
+ dmas = <&dmac1 0x53>, <&dmac1 0x52>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e88000 {
+ compatible = "renesas,scif-r8a7795", "renesas,scif";
+ reg = <0 0xe6e88000 0 64>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mssr R8A7795_CLK_SCIF2>;
+ clock-names = "sci_ick";
+ dmas = <&dmac1 0x13>, <&dmac1 0x12>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6c50000 {
+ compatible = "renesas,scif-r8a7795", "renesas,scif";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mssr R8A7795_CLK_SCIF3>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a7795", "renesas,scif";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mssr R8A7795_CLK_SCIF4>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6f30000 {
+ compatible = "renesas,scif-r8a7795", "renesas,scif";
+ reg = <0 0xe6f30000 0 64>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mssr R8A7795_CLK_SCIF5>;
+ clock-names = "sci_ick";
+ dmas = <&dmac1 0x5b>, <&dmac1 0x5a>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
};
};
--- 0012/include/dt-bindings/clock/r8a7795-clock.h
+++ work/include/dt-bindings/clock/r8a7795-clock.h 2015-10-01 19:24:51.200513000 +0900
@@ -22,8 +22,14 @@
/* MSTP1 */
/* MSTP2 */
+#define R8A7795_CLK_SCIF5 202
+#define R8A7795_CLK_SCIF4 203
+#define R8A7795_CLK_SCIF3 204
+#define R8A7795_CLK_SCIF1 206
+#define R8A7795_CLK_SCIF0 207
/* MSTP3 */
+#define R8A7795_CLK_SCIF2 210
/* MSTP5 */
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v10 04/07] arm64: renesas: r8a7795 dtsi: Add all SCIF nodes
2015-10-02 2:55 [PATCH v10 04/07] arm64: renesas: r8a7795 dtsi: Add all SCIF nodes Magnus Damm
@ 2015-10-02 7:11 ` Geert Uytterhoeven
2015-10-02 8:08 ` Simon Horman
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Geert Uytterhoeven @ 2015-10-02 7:11 UTC (permalink / raw)
To: linux-sh
On Fri, Oct 2, 2015 at 4:55 AM, Magnus Damm <magnus.damm@gmail.com> wrote:
> --- 0012/include/dt-bindings/clock/r8a7795-clock.h
> +++ work/include/dt-bindings/clock/r8a7795-clock.h 2015-10-01 19:24:51.200513000 +0900
> @@ -22,8 +22,14 @@
> /* MSTP1 */
>
> /* MSTP2 */
> +#define R8A7795_CLK_SCIF5 202
> +#define R8A7795_CLK_SCIF4 203
> +#define R8A7795_CLK_SCIF3 204
> +#define R8A7795_CLK_SCIF1 206
> +#define R8A7795_CLK_SCIF0 207
>
> /* MSTP3 */
> +#define R8A7795_CLK_SCIF2 210
310
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v10 04/07] arm64: renesas: r8a7795 dtsi: Add all SCIF nodes
2015-10-02 2:55 [PATCH v10 04/07] arm64: renesas: r8a7795 dtsi: Add all SCIF nodes Magnus Damm
2015-10-02 7:11 ` Geert Uytterhoeven
@ 2015-10-02 8:08 ` Simon Horman
2015-10-02 8:13 ` Geert Uytterhoeven
2015-10-05 2:30 ` Simon Horman
3 siblings, 0 replies; 5+ messages in thread
From: Simon Horman @ 2015-10-02 8:08 UTC (permalink / raw)
To: linux-sh
On Fri, Oct 02, 2015 at 09:11:50AM +0200, Geert Uytterhoeven wrote:
> On Fri, Oct 2, 2015 at 4:55 AM, Magnus Damm <magnus.damm@gmail.com> wrote:
> > --- 0012/include/dt-bindings/clock/r8a7795-clock.h
> > +++ work/include/dt-bindings/clock/r8a7795-clock.h 2015-10-01 19:24:51.200513000 +0900
> > @@ -22,8 +22,14 @@
> > /* MSTP1 */
> >
> > /* MSTP2 */
> > +#define R8A7795_CLK_SCIF5 202
> > +#define R8A7795_CLK_SCIF4 203
> > +#define R8A7795_CLK_SCIF3 204
> > +#define R8A7795_CLK_SCIF1 206
> > +#define R8A7795_CLK_SCIF0 207
> >
> > /* MSTP3 */
> > +#define R8A7795_CLK_SCIF2 210
>
> 310
Thanks, I will fix that.
I plan to wait a little to accumulate more changes.
But if for some reason you need this in a hurry I can
push an updated topic branch ASAP.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v10 04/07] arm64: renesas: r8a7795 dtsi: Add all SCIF nodes
2015-10-02 2:55 [PATCH v10 04/07] arm64: renesas: r8a7795 dtsi: Add all SCIF nodes Magnus Damm
2015-10-02 7:11 ` Geert Uytterhoeven
2015-10-02 8:08 ` Simon Horman
@ 2015-10-02 8:13 ` Geert Uytterhoeven
2015-10-05 2:30 ` Simon Horman
3 siblings, 0 replies; 5+ messages in thread
From: Geert Uytterhoeven @ 2015-10-02 8:13 UTC (permalink / raw)
To: linux-sh
Hi Simon,
On Fri, Oct 2, 2015 at 10:08 AM, Simon Horman <horms@verge.net.au> wrote:
> On Fri, Oct 02, 2015 at 09:11:50AM +0200, Geert Uytterhoeven wrote:
>> On Fri, Oct 2, 2015 at 4:55 AM, Magnus Damm <magnus.damm@gmail.com> wrote:
>> > --- 0012/include/dt-bindings/clock/r8a7795-clock.h
>> > +++ work/include/dt-bindings/clock/r8a7795-clock.h 2015-10-01 19:24:51.200513000 +0900
>> > @@ -22,8 +22,14 @@
>> > /* MSTP1 */
>> >
>> > /* MSTP2 */
>> > +#define R8A7795_CLK_SCIF5 202
>> > +#define R8A7795_CLK_SCIF4 203
>> > +#define R8A7795_CLK_SCIF3 204
>> > +#define R8A7795_CLK_SCIF1 206
>> > +#define R8A7795_CLK_SCIF0 207
>> >
>> > /* MSTP3 */
>> > +#define R8A7795_CLK_SCIF2 210
>>
>> 310
>
> Thanks, I will fix that.
>
> I plan to wait a little to accumulate more changes.
> But if for some reason you need this in a hurry I can
> push an updated topic branch ASAP.
Given how close we are to leaving for ELCE, I think we can live with it.
The correct clock will have been enabled by the boot loader anyway.
MSTP210 is MSIOF1, so no animals will be hurt by accidentally touching that
clock.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v10 04/07] arm64: renesas: r8a7795 dtsi: Add all SCIF nodes
2015-10-02 2:55 [PATCH v10 04/07] arm64: renesas: r8a7795 dtsi: Add all SCIF nodes Magnus Damm
` (2 preceding siblings ...)
2015-10-02 8:13 ` Geert Uytterhoeven
@ 2015-10-05 2:30 ` Simon Horman
3 siblings, 0 replies; 5+ messages in thread
From: Simon Horman @ 2015-10-05 2:30 UTC (permalink / raw)
To: linux-sh
On Fri, Oct 02, 2015 at 10:13:02AM +0200, Geert Uytterhoeven wrote:
> Hi Simon,
>
> On Fri, Oct 2, 2015 at 10:08 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Fri, Oct 02, 2015 at 09:11:50AM +0200, Geert Uytterhoeven wrote:
> >> On Fri, Oct 2, 2015 at 4:55 AM, Magnus Damm <magnus.damm@gmail.com> wrote:
> >> > --- 0012/include/dt-bindings/clock/r8a7795-clock.h
> >> > +++ work/include/dt-bindings/clock/r8a7795-clock.h 2015-10-01 19:24:51.200513000 +0900
> >> > @@ -22,8 +22,14 @@
> >> > /* MSTP1 */
> >> >
> >> > /* MSTP2 */
> >> > +#define R8A7795_CLK_SCIF5 202
> >> > +#define R8A7795_CLK_SCIF4 203
> >> > +#define R8A7795_CLK_SCIF3 204
> >> > +#define R8A7795_CLK_SCIF1 206
> >> > +#define R8A7795_CLK_SCIF0 207
> >> >
> >> > /* MSTP3 */
> >> > +#define R8A7795_CLK_SCIF2 210
> >>
> >> 310
> >
> > Thanks, I will fix that.
> >
> > I plan to wait a little to accumulate more changes.
> > But if for some reason you need this in a hurry I can
> > push an updated topic branch ASAP.
>
> Given how close we are to leaving for ELCE, I think we can live with it.
As I am rebasing other branches I have pushed the above in
topic/arm64-rcar-gen3-v10.1.
> The correct clock will have been enabled by the boot loader anyway.
> MSTP210 is MSIOF1, so no animals will be hurt by accidentally touching that
> clock.
:)
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-10-05 2:30 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-10-02 2:55 [PATCH v10 04/07] arm64: renesas: r8a7795 dtsi: Add all SCIF nodes Magnus Damm
2015-10-02 7:11 ` Geert Uytterhoeven
2015-10-02 8:08 ` Simon Horman
2015-10-02 8:13 ` Geert Uytterhoeven
2015-10-05 2:30 ` Simon Horman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.