Re: [PATCH 11/11] tty: amba-pl011: add support for ZTE UART (EXPERIMENTAL)

[Russell King - ARM Linux <linux@arm.linux.org.uk>]

On Thu, Nov 05, 2015 at 09:28:23AM +0100, Linus Walleij wrote:
> On Tue, Nov 3, 2015 at 3:51 PM, Russell King
> <rmk+kernel@arm.linux.org.uk> wrote:
> 
> > Add (incomplete) support for the ZTE UART to the AMBA PL011 driver.
> > This is similar to the ARM and ST variants, except it has a different
> > register address layout, and requires 32-bit accesses to the registers.
> > Use the newly introduced register tables and access size support to
> > cope with these differences.
> >
> > Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> 
> I applied the whole series, 1-11 and tested on Ux500 (ST Micro variant)
> and on the ARM RealView PB11MPCore.
> 
> It works like a charm. I also like the looks of this transformation.
> Tested-by: Linus Walleij <linus.walleij@linaro.org>

As I mentioned, the change in pl011_putc() needs undoing (I've already
modified that in my series).  Also, I'll try switching to the relaxed
accessors and checking that.  Thanks for the tested-by though, can I
assume that you're happy I add that even with the pl011_putc() change
undone?

-- 
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.