* [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
@ 2015-11-11 19:26 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:26 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Hi all,
This is part of the third revision of an RFC for adding to XFS support
for tracking reverse-mappings of physical blocks to file and metadata;
and support for mapping multiple file logical blocks to the same
physical block, more commonly known as reflinking.
This patchset aims to make xfstests perform more rigorous testing of
the NFS/CIFS/ocfs2/btrfs/XFS file clone, reflink, and dedupe ioctls.
There are now tests of the basic functionality of the three ioctls;
tests to ensure that the filesystem exhibits the expected copy on
write semantics; tests to try to suss out race conditions in the new
write paths; tests to ensure that the ioctls peform basic disk
accounting correctly; tests of the interaction between reflink and the
various fallocate verbs (allocate, punch, collapse, insert zeroes);
and some attempts to test the upper limits of reflinking and ENOSPC
behavior.
Since the last posting, each test tries to reflink (or dedupe) on the
test or scratch FS to decide if they're going to run, instead of
guessing based on FS type. Per Dave's suggestion, I also converted
the basic functionality tests to use fixed sizes so that I can use
md5sum in the golden output to check that the file contents match
exactly.
Issues:
* I think the race checks for dedupe could be a little sharper at
finding mistakes.
* The realtime reflink test (xfs/804) crashes XFS before we even get
to the reflink attempt.
* I started the numbering really high to prevent the tests from
colliding with whatever new tests might arrive; this will require
some intervention to fix.
If you're going to start using this mess, you probably ought to just
pull from my github trees for kernel[1], xfsprogs[2], xfstests[3], and
xfs-docs[4]. They should just work with the btrfs that's in 4.3...
and somewhat buggily with the 4.3 XFS patched with [1].
Comments and questions are, as always, welcome.
--D
[1] https://github.com/djwong/linux/tree/for-dave
[2] https://github.com/djwong/xfsprogs/tree/for-dave
[3] https://github.com/djwong/xfstests/tree/for-dave
[4] https://github.com/djwong/xfs-documentation/tree/for-dave
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH 01/11] btrfs: move btrfs reflink tests to generic
2015-11-11 19:26 ` Darrick J. Wong
@ 2015-11-11 19:26 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:26 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Move the cp --reflink tests from btrfs/ to generic/ since xfs now
supports that ioctl.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/btrfs/026 | 92 -----------------------------------------
tests/btrfs/026.out | 16 -------
tests/btrfs/027 | 109 -------------------------------------------------
tests/btrfs/027.out | 25 -----------
tests/btrfs/028 | 83 -------------------------------------
tests/btrfs/028.out | 7 ---
tests/btrfs/group | 3 -
tests/generic/800 | 92 +++++++++++++++++++++++++++++++++++++++++
tests/generic/800.out | 16 +++++++
tests/generic/801 | 109 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/801.out | 25 +++++++++++
tests/generic/802 | 83 +++++++++++++++++++++++++++++++++++++
tests/generic/802.out | 7 +++
tests/generic/group | 3 +
14 files changed, 335 insertions(+), 335 deletions(-)
delete mode 100755 tests/btrfs/026
delete mode 100644 tests/btrfs/026.out
delete mode 100755 tests/btrfs/027
delete mode 100644 tests/btrfs/027.out
delete mode 100755 tests/btrfs/028
delete mode 100644 tests/btrfs/028.out
create mode 100755 tests/generic/800
create mode 100644 tests/generic/800.out
create mode 100755 tests/generic/801
create mode 100644 tests/generic/801.out
create mode 100755 tests/generic/802
create mode 100644 tests/generic/802.out
diff --git a/tests/btrfs/026 b/tests/btrfs/026
deleted file mode 100755
index 7559ca2..0000000
--- a/tests/btrfs/026
+++ /dev/null
@@ -1,92 +0,0 @@
-#! /bin/bash
-# FS QA Test No. 026
-#
-# Tests file clone functionality of btrfs ("reflinks"):
-# - Reflink a file
-# - Reflink the reflinked file
-# - Modify the original file
-# - Modify the reflinked file
-#
-#-----------------------------------------------------------------------
-# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it would be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#-----------------------------------------------------------------------
-#
-
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
-
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
-
-_cleanup()
-{
- cd /
- rm -f $tmp.*
-}
-
-# get standard environment, filters and checks
-. common/rc
-. common/filter
-
-# real QA test starts here
-_supported_fs btrfs
-_supported_os Linux
-
-_require_xfs_io_command "fiemap"
-_require_cp_reflink
-_require_test
-
-TESTDIR1=$TEST_DIR/test-$seq
-rm -rf $TESTDIR1
-mkdir $TESTDIR1
-
-_checksum_files() {
- for F in original copy1 copy2
- do
- md5sum $TESTDIR1/$F | _filter_test_dir
- done
-}
-
-rm -f $seqres.full
-
-echo "Create the original file and reflink to copy1, copy2"
-$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 9000' $TESTDIR1/original \
- >> $seqres.full 2>&1
-cp --reflink $TESTDIR1/original $TESTDIR1/copy1
-cp --reflink $TESTDIR1/copy1 $TESTDIR1/copy2
-_verify_reflink $TESTDIR1/original $TESTDIR1/copy1
-_verify_reflink $TESTDIR1/original $TESTDIR1/copy2
-echo "Original md5sums:"
-_checksum_files
-
-echo "Overwrite original file with new data"
-$XFS_IO_PROG -c 'pwrite -S 0x62 0 9000' $TESTDIR1/original \
- >> $seqres.full 2>&1
-echo "md5sums after overwriting original:"
-_checksum_files
-
-echo "Overwrite copy1 with different new data"
-$XFS_IO_PROG -c 'pwrite -S 0x63 0 9000' $TESTDIR1/copy1 \
- >> $seqres.full 2>&1
-echo "md5sums after overwriting copy1:"
-_checksum_files
-
-# success, all done
-status=0
-exit
diff --git a/tests/btrfs/026.out b/tests/btrfs/026.out
deleted file mode 100644
index 3b90ff0..0000000
--- a/tests/btrfs/026.out
+++ /dev/null
@@ -1,16 +0,0 @@
-QA output created by 026
-Create the original file and reflink to copy1, copy2
-Original md5sums:
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-026/original
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-026/copy1
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-026/copy2
-Overwrite original file with new data
-md5sums after overwriting original:
-4a847a25439532bf48b68c9e9536ed5b TEST_DIR/test-026/original
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-026/copy1
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-026/copy2
-Overwrite copy1 with different new data
-md5sums after overwriting copy1:
-4a847a25439532bf48b68c9e9536ed5b TEST_DIR/test-026/original
-e271cd47d9f62ebc96cb4e67ae4d16db TEST_DIR/test-026/copy1
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-026/copy2
diff --git a/tests/btrfs/027 b/tests/btrfs/027
deleted file mode 100755
index d2b812b..0000000
--- a/tests/btrfs/027
+++ /dev/null
@@ -1,109 +0,0 @@
-#! /bin/bash
-# FS QA Test No. 027
-#
-# Tests file clone functionality of btrfs ("reflinks") on directory
-# trees.
-# - Create directory and subdirectory, each having one file
-# - Create 2 recursive reflinked copies of the tree
-# - Modify the original files
-# - Modify one of the copies
-#
-#-----------------------------------------------------------------------
-# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it would be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#-----------------------------------------------------------------------
-
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
-
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
-
-_cleanup()
-{
- cd /
- rm -f $tmp.*
-}
-
-# get standard environment, filters and checks
-. common/rc
-. common/filter
-
-# real QA test starts here
-_supported_fs btrfs
-_supported_os Linux
-
-_require_xfs_io_command "fiemap"
-_require_cp_reflink
-_require_test
-
-TESTDIR1=$TEST_DIR/test-$seq
-rm -rf $TESTDIR1
-mkdir $TESTDIR1
-
-_checksum_files() {
- for F in original/file1 original/subdir/file2 \
- copy1/file1 copy1/subdir/file2 \
- copy2/file1 copy2/subdir/file2
- do
- md5sum $TESTDIR1/$F | _filter_test_dir
- done
-}
-
-rm -f $seqres.full
-
-mkdir $TESTDIR1/original
-mkdir $TESTDIR1/original/subdir
-
-echo "Create the original files and reflink dirs"
-$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 9000' $TESTDIR1/original/file1 \
- >> $seqres.full 2>&1
-$XFS_IO_PROG -f -c 'pwrite -S 0x62 0 11000' \
- $TESTDIR1/original/subdir/file2 >> $seqres.full 2>&1
-cp --recursive --reflink $TESTDIR1/original $TESTDIR1/copy1
-cp --recursive --reflink $TESTDIR1/copy1 $TESTDIR1/copy2
-
-_verify_reflink $TESTDIR1/original/file1 $TESTDIR1/copy1/file1
-_verify_reflink $TESTDIR1/original/subdir/file2 \
- $TESTDIR1/copy1/subdir/file2
-_verify_reflink $TESTDIR1/original/file1 $TESTDIR1/copy2/file1
-_verify_reflink $TESTDIR1/original/subdir/file2 \
- $TESTDIR1/copy2/subdir/file2
-
-echo "Original md5sums:"
-_checksum_files
-
-echo "Overwrite original/file1 and original/subdir/file2 with new data"
-$XFS_IO_PROG -c 'pwrite -S 0x63 0 13000' $TESTDIR1/original/file1 \
- >> $seqres.full 2>&1
-$XFS_IO_PROG -c 'pwrite -S 0x64 5000 1000' \
- $TESTDIR1/original/subdir/file2 >> $seqres.full 2>&1
-echo "md5sums now:"
-_checksum_files
-
-echo "Overwrite copy1/file1 and copy1/subdir/file2 with new data"
-$XFS_IO_PROG -c 'pwrite -S 0x65 0 9000' $TESTDIR1/copy1/file1 \
- >> $seqres.full 2>&1
-$XFS_IO_PROG -c 'pwrite -S 0x66 5000 25000' \
- $TESTDIR1/copy1/subdir/file2 >> $seqres.full 2>&1
-echo "md5sums now:"
-_checksum_files
-
-# success, all done
-status=0
-exit
diff --git a/tests/btrfs/027.out b/tests/btrfs/027.out
deleted file mode 100644
index 7b7e3bb..0000000
--- a/tests/btrfs/027.out
+++ /dev/null
@@ -1,25 +0,0 @@
-QA output created by 027
-Create the original files and reflink dirs
-Original md5sums:
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-027/original/file1
-ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-027/original/subdir/file2
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-027/copy1/file1
-ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-027/copy1/subdir/file2
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-027/copy2/file1
-ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-027/copy2/subdir/file2
-Overwrite original/file1 and original/subdir/file2 with new data
-md5sums now:
-260f6785c0537fd12582dcae28a3c1a9 TEST_DIR/test-027/original/file1
-b8d91fb600f6f2191f2ba66665374860 TEST_DIR/test-027/original/subdir/file2
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-027/copy1/file1
-ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-027/copy1/subdir/file2
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-027/copy2/file1
-ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-027/copy2/subdir/file2
-Overwrite copy1/file1 and copy1/subdir/file2 with new data
-md5sums now:
-260f6785c0537fd12582dcae28a3c1a9 TEST_DIR/test-027/original/file1
-b8d91fb600f6f2191f2ba66665374860 TEST_DIR/test-027/original/subdir/file2
-b20229a003e3985c4b0e6806abcd6642 TEST_DIR/test-027/copy1/file1
-b815b24069db14e0a3a07169fd563e93 TEST_DIR/test-027/copy1/subdir/file2
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-027/copy2/file1
-ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-027/copy2/subdir/file2
diff --git a/tests/btrfs/028 b/tests/btrfs/028
deleted file mode 100755
index 7193337..0000000
--- a/tests/btrfs/028
+++ /dev/null
@@ -1,83 +0,0 @@
-#! /bin/bash
-# FS QA Test No. 028
-#
-# Moving and deleting cloned ("reflinked") files on btrfs:
-# - Create a file and a reflink
-# - Move both to a directory
-# - Delete the original (moved) file, check that the copy still exists.
-#
-#-----------------------------------------------------------------------
-# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it would be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#-----------------------------------------------------------------------
-
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
-
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
-
-_cleanup()
-{
- cd /
- rm -f $tmp.*
-}
-
-# get standard environment, filters and checks
-. ./common/rc
-. ./common/filter
-
-# real QA test starts here
-_supported_fs btrfs
-_supported_os Linux
-
-_require_xfs_io_command "fiemap"
-_require_cp_reflink
-_require_test
-
-rm -f $seqres.full
-
-TESTDIR1=$TEST_DIR/test-$seq
-rm -rf $TESTDIR1
-mkdir $TESTDIR1
-
-echo "Create the original files and reflink dirs"
-$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 9000' $TESTDIR1/original \
- >> $seqres.full
-cp --reflink $TESTDIR1/original $TESTDIR1/copy
-
-_verify_reflink $TESTDIR1/original $TESTDIR1/copy
-
-echo "Move orig & reflink copy to subdir and md5sum:"
-mkdir $TESTDIR1/subdir
-mv $TESTDIR1/original $TESTDIR1/subdir/original_moved
-mv $TESTDIR1/copy $TESTDIR1/subdir/copy_moved
-_verify_reflink $TESTDIR1/subdir/original_moved \
- $TESTDIR1/subdir/copy_moved
-
-md5sum $TESTDIR1/subdir/original_moved | _filter_test_dir
-md5sum $TESTDIR1/subdir/copy_moved | _filter_test_dir
-
-echo "remove orig from subdir and md5sum reflink copy:"
-rm $TESTDIR1/subdir/original_moved
-md5sum $TESTDIR1/subdir/copy_moved | _filter_test_dir
-rm -rf $TESTDIR1/subdir
-
-# success, all done
-status=0
-exit
diff --git a/tests/btrfs/028.out b/tests/btrfs/028.out
deleted file mode 100644
index f683fce..0000000
--- a/tests/btrfs/028.out
+++ /dev/null
@@ -1,7 +0,0 @@
-QA output created by 028
-Create the original files and reflink dirs
-Move orig & reflink copy to subdir and md5sum:
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-028/subdir/original_moved
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-028/subdir/copy_moved
-remove orig from subdir and md5sum reflink copy:
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-028/subdir/copy_moved
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 7cf7dd7..c5d529f 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -28,9 +28,6 @@
023 auto
024 auto quick compress
025 auto quick send clone
-026 auto quick clone
-027 auto quick clone
-028 auto quick clone
029 auto quick clone
030 auto quick send
031 auto quick subvol clone
diff --git a/tests/generic/800 b/tests/generic/800
new file mode 100755
index 0000000..a71f11a
--- /dev/null
+++ b/tests/generic/800
@@ -0,0 +1,92 @@
+#! /bin/bash
+# FS QA Test No. 800
+#
+# Tests file clone functionality of btrfs ("reflinks"):
+# - Reflink a file
+# - Reflink the reflinked file
+# - Modify the original file
+# - Modify the reflinked file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. common/rc
+. common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+
+_require_xfs_io_command "fiemap"
+_require_cp_reflink
+_require_test
+
+TESTDIR1=$TEST_DIR/test-$seq
+rm -rf $TESTDIR1
+mkdir $TESTDIR1
+
+_checksum_files() {
+ for F in original copy1 copy2
+ do
+ md5sum $TESTDIR1/$F | _filter_test_dir
+ done
+}
+
+rm -f $seqres.full
+
+echo "Create the original file and reflink to copy1, copy2"
+$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 9000' $TESTDIR1/original \
+ >> $seqres.full 2>&1
+cp --reflink $TESTDIR1/original $TESTDIR1/copy1
+cp --reflink $TESTDIR1/copy1 $TESTDIR1/copy2
+_verify_reflink $TESTDIR1/original $TESTDIR1/copy1
+_verify_reflink $TESTDIR1/original $TESTDIR1/copy2
+echo "Original md5sums:"
+_checksum_files
+
+echo "Overwrite original file with new data"
+$XFS_IO_PROG -c 'pwrite -S 0x62 0 9000' $TESTDIR1/original \
+ >> $seqres.full 2>&1
+echo "md5sums after overwriting original:"
+_checksum_files
+
+echo "Overwrite copy1 with different new data"
+$XFS_IO_PROG -c 'pwrite -S 0x63 0 9000' $TESTDIR1/copy1 \
+ >> $seqres.full 2>&1
+echo "md5sums after overwriting copy1:"
+_checksum_files
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/800.out b/tests/generic/800.out
new file mode 100644
index 0000000..6978d71
--- /dev/null
+++ b/tests/generic/800.out
@@ -0,0 +1,16 @@
+QA output created by 800
+Create the original file and reflink to copy1, copy2
+Original md5sums:
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-800/original
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-800/copy1
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-800/copy2
+Overwrite original file with new data
+md5sums after overwriting original:
+4a847a25439532bf48b68c9e9536ed5b TEST_DIR/test-800/original
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-800/copy1
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-800/copy2
+Overwrite copy1 with different new data
+md5sums after overwriting copy1:
+4a847a25439532bf48b68c9e9536ed5b TEST_DIR/test-800/original
+e271cd47d9f62ebc96cb4e67ae4d16db TEST_DIR/test-800/copy1
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-800/copy2
diff --git a/tests/generic/801 b/tests/generic/801
new file mode 100755
index 0000000..b21c44b
--- /dev/null
+++ b/tests/generic/801
@@ -0,0 +1,109 @@
+#! /bin/bash
+# FS QA Test No. 801
+#
+# Tests file clone functionality of btrfs ("reflinks") on directory
+# trees.
+# - Create directory and subdirectory, each having one file
+# - Create 2 recursive reflinked copies of the tree
+# - Modify the original files
+# - Modify one of the copies
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. common/rc
+. common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+
+_require_xfs_io_command "fiemap"
+_require_cp_reflink
+_require_test
+
+TESTDIR1=$TEST_DIR/test-$seq
+rm -rf $TESTDIR1
+mkdir $TESTDIR1
+
+_checksum_files() {
+ for F in original/file1 original/subdir/file2 \
+ copy1/file1 copy1/subdir/file2 \
+ copy2/file1 copy2/subdir/file2
+ do
+ md5sum $TESTDIR1/$F | _filter_test_dir
+ done
+}
+
+rm -f $seqres.full
+
+mkdir $TESTDIR1/original
+mkdir $TESTDIR1/original/subdir
+
+echo "Create the original files and reflink dirs"
+$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 9000' $TESTDIR1/original/file1 \
+ >> $seqres.full 2>&1
+$XFS_IO_PROG -f -c 'pwrite -S 0x62 0 11000' \
+ $TESTDIR1/original/subdir/file2 >> $seqres.full 2>&1
+cp --recursive --reflink $TESTDIR1/original $TESTDIR1/copy1
+cp --recursive --reflink $TESTDIR1/copy1 $TESTDIR1/copy2
+
+_verify_reflink $TESTDIR1/original/file1 $TESTDIR1/copy1/file1
+_verify_reflink $TESTDIR1/original/subdir/file2 \
+ $TESTDIR1/copy1/subdir/file2
+_verify_reflink $TESTDIR1/original/file1 $TESTDIR1/copy2/file1
+_verify_reflink $TESTDIR1/original/subdir/file2 \
+ $TESTDIR1/copy2/subdir/file2
+
+echo "Original md5sums:"
+_checksum_files
+
+echo "Overwrite original/file1 and original/subdir/file2 with new data"
+$XFS_IO_PROG -c 'pwrite -S 0x63 0 13000' $TESTDIR1/original/file1 \
+ >> $seqres.full 2>&1
+$XFS_IO_PROG -c 'pwrite -S 0x64 5000 1000' \
+ $TESTDIR1/original/subdir/file2 >> $seqres.full 2>&1
+echo "md5sums now:"
+_checksum_files
+
+echo "Overwrite copy1/file1 and copy1/subdir/file2 with new data"
+$XFS_IO_PROG -c 'pwrite -S 0x65 0 9000' $TESTDIR1/copy1/file1 \
+ >> $seqres.full 2>&1
+$XFS_IO_PROG -c 'pwrite -S 0x66 5000 25000' \
+ $TESTDIR1/copy1/subdir/file2 >> $seqres.full 2>&1
+echo "md5sums now:"
+_checksum_files
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/801.out b/tests/generic/801.out
new file mode 100644
index 0000000..b8225cc
--- /dev/null
+++ b/tests/generic/801.out
@@ -0,0 +1,25 @@
+QA output created by 801
+Create the original files and reflink dirs
+Original md5sums:
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-801/original/file1
+ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-801/original/subdir/file2
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-801/copy1/file1
+ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-801/copy1/subdir/file2
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-801/copy2/file1
+ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-801/copy2/subdir/file2
+Overwrite original/file1 and original/subdir/file2 with new data
+md5sums now:
+260f6785c0537fd12582dcae28a3c1a9 TEST_DIR/test-801/original/file1
+b8d91fb600f6f2191f2ba66665374860 TEST_DIR/test-801/original/subdir/file2
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-801/copy1/file1
+ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-801/copy1/subdir/file2
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-801/copy2/file1
+ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-801/copy2/subdir/file2
+Overwrite copy1/file1 and copy1/subdir/file2 with new data
+md5sums now:
+260f6785c0537fd12582dcae28a3c1a9 TEST_DIR/test-801/original/file1
+b8d91fb600f6f2191f2ba66665374860 TEST_DIR/test-801/original/subdir/file2
+b20229a003e3985c4b0e6806abcd6642 TEST_DIR/test-801/copy1/file1
+b815b24069db14e0a3a07169fd563e93 TEST_DIR/test-801/copy1/subdir/file2
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-801/copy2/file1
+ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-801/copy2/subdir/file2
diff --git a/tests/generic/802 b/tests/generic/802
new file mode 100755
index 0000000..afd8513
--- /dev/null
+++ b/tests/generic/802
@@ -0,0 +1,83 @@
+#! /bin/bash
+# FS QA Test No. 802
+#
+# Moving and deleting cloned ("reflinked") files on btrfs:
+# - Create a file and a reflink
+# - Move both to a directory
+# - Delete the original (moved) file, check that the copy still exists.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+
+_require_xfs_io_command "fiemap"
+_require_cp_reflink
+_require_test
+
+rm -f $seqres.full
+
+TESTDIR1=$TEST_DIR/test-$seq
+rm -rf $TESTDIR1
+mkdir $TESTDIR1
+
+echo "Create the original files and reflink dirs"
+$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 9000' $TESTDIR1/original \
+ >> $seqres.full
+cp --reflink $TESTDIR1/original $TESTDIR1/copy
+
+_verify_reflink $TESTDIR1/original $TESTDIR1/copy
+
+echo "Move orig & reflink copy to subdir and md5sum:"
+mkdir $TESTDIR1/subdir
+mv $TESTDIR1/original $TESTDIR1/subdir/original_moved
+mv $TESTDIR1/copy $TESTDIR1/subdir/copy_moved
+_verify_reflink $TESTDIR1/subdir/original_moved \
+ $TESTDIR1/subdir/copy_moved
+
+md5sum $TESTDIR1/subdir/original_moved | _filter_test_dir
+md5sum $TESTDIR1/subdir/copy_moved | _filter_test_dir
+
+echo "remove orig from subdir and md5sum reflink copy:"
+rm $TESTDIR1/subdir/original_moved
+md5sum $TESTDIR1/subdir/copy_moved | _filter_test_dir
+rm -rf $TESTDIR1/subdir
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/802.out b/tests/generic/802.out
new file mode 100644
index 0000000..c20e16e
--- /dev/null
+++ b/tests/generic/802.out
@@ -0,0 +1,7 @@
+QA output created by 802
+Create the original files and reflink dirs
+Move orig & reflink copy to subdir and md5sum:
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-802/subdir/original_moved
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-802/subdir/copy_moved
+remove orig from subdir and md5sum reflink copy:
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-802/subdir/copy_moved
diff --git a/tests/generic/group b/tests/generic/group
index 1dd4269..d9421c5 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -208,3 +208,6 @@
323 auto aio stress
324 auto fsr quick
325 auto quick data log
+800 auto quick clone
+801 auto quick clone
+802 auto quick clone
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH 01/11] btrfs: move btrfs reflink tests to generic
@ 2015-11-11 19:26 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:26 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Move the cp --reflink tests from btrfs/ to generic/ since xfs now
supports that ioctl.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/btrfs/026 | 92 -----------------------------------------
tests/btrfs/026.out | 16 -------
tests/btrfs/027 | 109 -------------------------------------------------
tests/btrfs/027.out | 25 -----------
tests/btrfs/028 | 83 -------------------------------------
tests/btrfs/028.out | 7 ---
tests/btrfs/group | 3 -
tests/generic/800 | 92 +++++++++++++++++++++++++++++++++++++++++
tests/generic/800.out | 16 +++++++
tests/generic/801 | 109 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/801.out | 25 +++++++++++
tests/generic/802 | 83 +++++++++++++++++++++++++++++++++++++
tests/generic/802.out | 7 +++
tests/generic/group | 3 +
14 files changed, 335 insertions(+), 335 deletions(-)
delete mode 100755 tests/btrfs/026
delete mode 100644 tests/btrfs/026.out
delete mode 100755 tests/btrfs/027
delete mode 100644 tests/btrfs/027.out
delete mode 100755 tests/btrfs/028
delete mode 100644 tests/btrfs/028.out
create mode 100755 tests/generic/800
create mode 100644 tests/generic/800.out
create mode 100755 tests/generic/801
create mode 100644 tests/generic/801.out
create mode 100755 tests/generic/802
create mode 100644 tests/generic/802.out
diff --git a/tests/btrfs/026 b/tests/btrfs/026
deleted file mode 100755
index 7559ca2..0000000
--- a/tests/btrfs/026
+++ /dev/null
@@ -1,92 +0,0 @@
-#! /bin/bash
-# FS QA Test No. 026
-#
-# Tests file clone functionality of btrfs ("reflinks"):
-# - Reflink a file
-# - Reflink the reflinked file
-# - Modify the original file
-# - Modify the reflinked file
-#
-#-----------------------------------------------------------------------
-# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it would be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#-----------------------------------------------------------------------
-#
-
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
-
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
-
-_cleanup()
-{
- cd /
- rm -f $tmp.*
-}
-
-# get standard environment, filters and checks
-. common/rc
-. common/filter
-
-# real QA test starts here
-_supported_fs btrfs
-_supported_os Linux
-
-_require_xfs_io_command "fiemap"
-_require_cp_reflink
-_require_test
-
-TESTDIR1=$TEST_DIR/test-$seq
-rm -rf $TESTDIR1
-mkdir $TESTDIR1
-
-_checksum_files() {
- for F in original copy1 copy2
- do
- md5sum $TESTDIR1/$F | _filter_test_dir
- done
-}
-
-rm -f $seqres.full
-
-echo "Create the original file and reflink to copy1, copy2"
-$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 9000' $TESTDIR1/original \
- >> $seqres.full 2>&1
-cp --reflink $TESTDIR1/original $TESTDIR1/copy1
-cp --reflink $TESTDIR1/copy1 $TESTDIR1/copy2
-_verify_reflink $TESTDIR1/original $TESTDIR1/copy1
-_verify_reflink $TESTDIR1/original $TESTDIR1/copy2
-echo "Original md5sums:"
-_checksum_files
-
-echo "Overwrite original file with new data"
-$XFS_IO_PROG -c 'pwrite -S 0x62 0 9000' $TESTDIR1/original \
- >> $seqres.full 2>&1
-echo "md5sums after overwriting original:"
-_checksum_files
-
-echo "Overwrite copy1 with different new data"
-$XFS_IO_PROG -c 'pwrite -S 0x63 0 9000' $TESTDIR1/copy1 \
- >> $seqres.full 2>&1
-echo "md5sums after overwriting copy1:"
-_checksum_files
-
-# success, all done
-status=0
-exit
diff --git a/tests/btrfs/026.out b/tests/btrfs/026.out
deleted file mode 100644
index 3b90ff0..0000000
--- a/tests/btrfs/026.out
+++ /dev/null
@@ -1,16 +0,0 @@
-QA output created by 026
-Create the original file and reflink to copy1, copy2
-Original md5sums:
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-026/original
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-026/copy1
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-026/copy2
-Overwrite original file with new data
-md5sums after overwriting original:
-4a847a25439532bf48b68c9e9536ed5b TEST_DIR/test-026/original
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-026/copy1
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-026/copy2
-Overwrite copy1 with different new data
-md5sums after overwriting copy1:
-4a847a25439532bf48b68c9e9536ed5b TEST_DIR/test-026/original
-e271cd47d9f62ebc96cb4e67ae4d16db TEST_DIR/test-026/copy1
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-026/copy2
diff --git a/tests/btrfs/027 b/tests/btrfs/027
deleted file mode 100755
index d2b812b..0000000
--- a/tests/btrfs/027
+++ /dev/null
@@ -1,109 +0,0 @@
-#! /bin/bash
-# FS QA Test No. 027
-#
-# Tests file clone functionality of btrfs ("reflinks") on directory
-# trees.
-# - Create directory and subdirectory, each having one file
-# - Create 2 recursive reflinked copies of the tree
-# - Modify the original files
-# - Modify one of the copies
-#
-#-----------------------------------------------------------------------
-# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it would be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#-----------------------------------------------------------------------
-
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
-
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
-
-_cleanup()
-{
- cd /
- rm -f $tmp.*
-}
-
-# get standard environment, filters and checks
-. common/rc
-. common/filter
-
-# real QA test starts here
-_supported_fs btrfs
-_supported_os Linux
-
-_require_xfs_io_command "fiemap"
-_require_cp_reflink
-_require_test
-
-TESTDIR1=$TEST_DIR/test-$seq
-rm -rf $TESTDIR1
-mkdir $TESTDIR1
-
-_checksum_files() {
- for F in original/file1 original/subdir/file2 \
- copy1/file1 copy1/subdir/file2 \
- copy2/file1 copy2/subdir/file2
- do
- md5sum $TESTDIR1/$F | _filter_test_dir
- done
-}
-
-rm -f $seqres.full
-
-mkdir $TESTDIR1/original
-mkdir $TESTDIR1/original/subdir
-
-echo "Create the original files and reflink dirs"
-$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 9000' $TESTDIR1/original/file1 \
- >> $seqres.full 2>&1
-$XFS_IO_PROG -f -c 'pwrite -S 0x62 0 11000' \
- $TESTDIR1/original/subdir/file2 >> $seqres.full 2>&1
-cp --recursive --reflink $TESTDIR1/original $TESTDIR1/copy1
-cp --recursive --reflink $TESTDIR1/copy1 $TESTDIR1/copy2
-
-_verify_reflink $TESTDIR1/original/file1 $TESTDIR1/copy1/file1
-_verify_reflink $TESTDIR1/original/subdir/file2 \
- $TESTDIR1/copy1/subdir/file2
-_verify_reflink $TESTDIR1/original/file1 $TESTDIR1/copy2/file1
-_verify_reflink $TESTDIR1/original/subdir/file2 \
- $TESTDIR1/copy2/subdir/file2
-
-echo "Original md5sums:"
-_checksum_files
-
-echo "Overwrite original/file1 and original/subdir/file2 with new data"
-$XFS_IO_PROG -c 'pwrite -S 0x63 0 13000' $TESTDIR1/original/file1 \
- >> $seqres.full 2>&1
-$XFS_IO_PROG -c 'pwrite -S 0x64 5000 1000' \
- $TESTDIR1/original/subdir/file2 >> $seqres.full 2>&1
-echo "md5sums now:"
-_checksum_files
-
-echo "Overwrite copy1/file1 and copy1/subdir/file2 with new data"
-$XFS_IO_PROG -c 'pwrite -S 0x65 0 9000' $TESTDIR1/copy1/file1 \
- >> $seqres.full 2>&1
-$XFS_IO_PROG -c 'pwrite -S 0x66 5000 25000' \
- $TESTDIR1/copy1/subdir/file2 >> $seqres.full 2>&1
-echo "md5sums now:"
-_checksum_files
-
-# success, all done
-status=0
-exit
diff --git a/tests/btrfs/027.out b/tests/btrfs/027.out
deleted file mode 100644
index 7b7e3bb..0000000
--- a/tests/btrfs/027.out
+++ /dev/null
@@ -1,25 +0,0 @@
-QA output created by 027
-Create the original files and reflink dirs
-Original md5sums:
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-027/original/file1
-ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-027/original/subdir/file2
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-027/copy1/file1
-ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-027/copy1/subdir/file2
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-027/copy2/file1
-ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-027/copy2/subdir/file2
-Overwrite original/file1 and original/subdir/file2 with new data
-md5sums now:
-260f6785c0537fd12582dcae28a3c1a9 TEST_DIR/test-027/original/file1
-b8d91fb600f6f2191f2ba66665374860 TEST_DIR/test-027/original/subdir/file2
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-027/copy1/file1
-ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-027/copy1/subdir/file2
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-027/copy2/file1
-ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-027/copy2/subdir/file2
-Overwrite copy1/file1 and copy1/subdir/file2 with new data
-md5sums now:
-260f6785c0537fd12582dcae28a3c1a9 TEST_DIR/test-027/original/file1
-b8d91fb600f6f2191f2ba66665374860 TEST_DIR/test-027/original/subdir/file2
-b20229a003e3985c4b0e6806abcd6642 TEST_DIR/test-027/copy1/file1
-b815b24069db14e0a3a07169fd563e93 TEST_DIR/test-027/copy1/subdir/file2
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-027/copy2/file1
-ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-027/copy2/subdir/file2
diff --git a/tests/btrfs/028 b/tests/btrfs/028
deleted file mode 100755
index 7193337..0000000
--- a/tests/btrfs/028
+++ /dev/null
@@ -1,83 +0,0 @@
-#! /bin/bash
-# FS QA Test No. 028
-#
-# Moving and deleting cloned ("reflinked") files on btrfs:
-# - Create a file and a reflink
-# - Move both to a directory
-# - Delete the original (moved) file, check that the copy still exists.
-#
-#-----------------------------------------------------------------------
-# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it would be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#-----------------------------------------------------------------------
-
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
-
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "_cleanup; exit \$status" 0 1 2 3 15
-
-_cleanup()
-{
- cd /
- rm -f $tmp.*
-}
-
-# get standard environment, filters and checks
-. ./common/rc
-. ./common/filter
-
-# real QA test starts here
-_supported_fs btrfs
-_supported_os Linux
-
-_require_xfs_io_command "fiemap"
-_require_cp_reflink
-_require_test
-
-rm -f $seqres.full
-
-TESTDIR1=$TEST_DIR/test-$seq
-rm -rf $TESTDIR1
-mkdir $TESTDIR1
-
-echo "Create the original files and reflink dirs"
-$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 9000' $TESTDIR1/original \
- >> $seqres.full
-cp --reflink $TESTDIR1/original $TESTDIR1/copy
-
-_verify_reflink $TESTDIR1/original $TESTDIR1/copy
-
-echo "Move orig & reflink copy to subdir and md5sum:"
-mkdir $TESTDIR1/subdir
-mv $TESTDIR1/original $TESTDIR1/subdir/original_moved
-mv $TESTDIR1/copy $TESTDIR1/subdir/copy_moved
-_verify_reflink $TESTDIR1/subdir/original_moved \
- $TESTDIR1/subdir/copy_moved
-
-md5sum $TESTDIR1/subdir/original_moved | _filter_test_dir
-md5sum $TESTDIR1/subdir/copy_moved | _filter_test_dir
-
-echo "remove orig from subdir and md5sum reflink copy:"
-rm $TESTDIR1/subdir/original_moved
-md5sum $TESTDIR1/subdir/copy_moved | _filter_test_dir
-rm -rf $TESTDIR1/subdir
-
-# success, all done
-status=0
-exit
diff --git a/tests/btrfs/028.out b/tests/btrfs/028.out
deleted file mode 100644
index f683fce..0000000
--- a/tests/btrfs/028.out
+++ /dev/null
@@ -1,7 +0,0 @@
-QA output created by 028
-Create the original files and reflink dirs
-Move orig & reflink copy to subdir and md5sum:
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-028/subdir/original_moved
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-028/subdir/copy_moved
-remove orig from subdir and md5sum reflink copy:
-42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-028/subdir/copy_moved
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 7cf7dd7..c5d529f 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -28,9 +28,6 @@
023 auto
024 auto quick compress
025 auto quick send clone
-026 auto quick clone
-027 auto quick clone
-028 auto quick clone
029 auto quick clone
030 auto quick send
031 auto quick subvol clone
diff --git a/tests/generic/800 b/tests/generic/800
new file mode 100755
index 0000000..a71f11a
--- /dev/null
+++ b/tests/generic/800
@@ -0,0 +1,92 @@
+#! /bin/bash
+# FS QA Test No. 800
+#
+# Tests file clone functionality of btrfs ("reflinks"):
+# - Reflink a file
+# - Reflink the reflinked file
+# - Modify the original file
+# - Modify the reflinked file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. common/rc
+. common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+
+_require_xfs_io_command "fiemap"
+_require_cp_reflink
+_require_test
+
+TESTDIR1=$TEST_DIR/test-$seq
+rm -rf $TESTDIR1
+mkdir $TESTDIR1
+
+_checksum_files() {
+ for F in original copy1 copy2
+ do
+ md5sum $TESTDIR1/$F | _filter_test_dir
+ done
+}
+
+rm -f $seqres.full
+
+echo "Create the original file and reflink to copy1, copy2"
+$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 9000' $TESTDIR1/original \
+ >> $seqres.full 2>&1
+cp --reflink $TESTDIR1/original $TESTDIR1/copy1
+cp --reflink $TESTDIR1/copy1 $TESTDIR1/copy2
+_verify_reflink $TESTDIR1/original $TESTDIR1/copy1
+_verify_reflink $TESTDIR1/original $TESTDIR1/copy2
+echo "Original md5sums:"
+_checksum_files
+
+echo "Overwrite original file with new data"
+$XFS_IO_PROG -c 'pwrite -S 0x62 0 9000' $TESTDIR1/original \
+ >> $seqres.full 2>&1
+echo "md5sums after overwriting original:"
+_checksum_files
+
+echo "Overwrite copy1 with different new data"
+$XFS_IO_PROG -c 'pwrite -S 0x63 0 9000' $TESTDIR1/copy1 \
+ >> $seqres.full 2>&1
+echo "md5sums after overwriting copy1:"
+_checksum_files
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/800.out b/tests/generic/800.out
new file mode 100644
index 0000000..6978d71
--- /dev/null
+++ b/tests/generic/800.out
@@ -0,0 +1,16 @@
+QA output created by 800
+Create the original file and reflink to copy1, copy2
+Original md5sums:
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-800/original
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-800/copy1
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-800/copy2
+Overwrite original file with new data
+md5sums after overwriting original:
+4a847a25439532bf48b68c9e9536ed5b TEST_DIR/test-800/original
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-800/copy1
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-800/copy2
+Overwrite copy1 with different new data
+md5sums after overwriting copy1:
+4a847a25439532bf48b68c9e9536ed5b TEST_DIR/test-800/original
+e271cd47d9f62ebc96cb4e67ae4d16db TEST_DIR/test-800/copy1
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-800/copy2
diff --git a/tests/generic/801 b/tests/generic/801
new file mode 100755
index 0000000..b21c44b
--- /dev/null
+++ b/tests/generic/801
@@ -0,0 +1,109 @@
+#! /bin/bash
+# FS QA Test No. 801
+#
+# Tests file clone functionality of btrfs ("reflinks") on directory
+# trees.
+# - Create directory and subdirectory, each having one file
+# - Create 2 recursive reflinked copies of the tree
+# - Modify the original files
+# - Modify one of the copies
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. common/rc
+. common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+
+_require_xfs_io_command "fiemap"
+_require_cp_reflink
+_require_test
+
+TESTDIR1=$TEST_DIR/test-$seq
+rm -rf $TESTDIR1
+mkdir $TESTDIR1
+
+_checksum_files() {
+ for F in original/file1 original/subdir/file2 \
+ copy1/file1 copy1/subdir/file2 \
+ copy2/file1 copy2/subdir/file2
+ do
+ md5sum $TESTDIR1/$F | _filter_test_dir
+ done
+}
+
+rm -f $seqres.full
+
+mkdir $TESTDIR1/original
+mkdir $TESTDIR1/original/subdir
+
+echo "Create the original files and reflink dirs"
+$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 9000' $TESTDIR1/original/file1 \
+ >> $seqres.full 2>&1
+$XFS_IO_PROG -f -c 'pwrite -S 0x62 0 11000' \
+ $TESTDIR1/original/subdir/file2 >> $seqres.full 2>&1
+cp --recursive --reflink $TESTDIR1/original $TESTDIR1/copy1
+cp --recursive --reflink $TESTDIR1/copy1 $TESTDIR1/copy2
+
+_verify_reflink $TESTDIR1/original/file1 $TESTDIR1/copy1/file1
+_verify_reflink $TESTDIR1/original/subdir/file2 \
+ $TESTDIR1/copy1/subdir/file2
+_verify_reflink $TESTDIR1/original/file1 $TESTDIR1/copy2/file1
+_verify_reflink $TESTDIR1/original/subdir/file2 \
+ $TESTDIR1/copy2/subdir/file2
+
+echo "Original md5sums:"
+_checksum_files
+
+echo "Overwrite original/file1 and original/subdir/file2 with new data"
+$XFS_IO_PROG -c 'pwrite -S 0x63 0 13000' $TESTDIR1/original/file1 \
+ >> $seqres.full 2>&1
+$XFS_IO_PROG -c 'pwrite -S 0x64 5000 1000' \
+ $TESTDIR1/original/subdir/file2 >> $seqres.full 2>&1
+echo "md5sums now:"
+_checksum_files
+
+echo "Overwrite copy1/file1 and copy1/subdir/file2 with new data"
+$XFS_IO_PROG -c 'pwrite -S 0x65 0 9000' $TESTDIR1/copy1/file1 \
+ >> $seqres.full 2>&1
+$XFS_IO_PROG -c 'pwrite -S 0x66 5000 25000' \
+ $TESTDIR1/copy1/subdir/file2 >> $seqres.full 2>&1
+echo "md5sums now:"
+_checksum_files
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/801.out b/tests/generic/801.out
new file mode 100644
index 0000000..b8225cc
--- /dev/null
+++ b/tests/generic/801.out
@@ -0,0 +1,25 @@
+QA output created by 801
+Create the original files and reflink dirs
+Original md5sums:
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-801/original/file1
+ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-801/original/subdir/file2
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-801/copy1/file1
+ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-801/copy1/subdir/file2
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-801/copy2/file1
+ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-801/copy2/subdir/file2
+Overwrite original/file1 and original/subdir/file2 with new data
+md5sums now:
+260f6785c0537fd12582dcae28a3c1a9 TEST_DIR/test-801/original/file1
+b8d91fb600f6f2191f2ba66665374860 TEST_DIR/test-801/original/subdir/file2
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-801/copy1/file1
+ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-801/copy1/subdir/file2
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-801/copy2/file1
+ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-801/copy2/subdir/file2
+Overwrite copy1/file1 and copy1/subdir/file2 with new data
+md5sums now:
+260f6785c0537fd12582dcae28a3c1a9 TEST_DIR/test-801/original/file1
+b8d91fb600f6f2191f2ba66665374860 TEST_DIR/test-801/original/subdir/file2
+b20229a003e3985c4b0e6806abcd6642 TEST_DIR/test-801/copy1/file1
+b815b24069db14e0a3a07169fd563e93 TEST_DIR/test-801/copy1/subdir/file2
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-801/copy2/file1
+ca390545f0aedb54b808d6128c56a7dd TEST_DIR/test-801/copy2/subdir/file2
diff --git a/tests/generic/802 b/tests/generic/802
new file mode 100755
index 0000000..afd8513
--- /dev/null
+++ b/tests/generic/802
@@ -0,0 +1,83 @@
+#! /bin/bash
+# FS QA Test No. 802
+#
+# Moving and deleting cloned ("reflinked") files on btrfs:
+# - Create a file and a reflink
+# - Move both to a directory
+# - Delete the original (moved) file, check that the copy still exists.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+
+_require_xfs_io_command "fiemap"
+_require_cp_reflink
+_require_test
+
+rm -f $seqres.full
+
+TESTDIR1=$TEST_DIR/test-$seq
+rm -rf $TESTDIR1
+mkdir $TESTDIR1
+
+echo "Create the original files and reflink dirs"
+$XFS_IO_PROG -f -c 'pwrite -S 0x61 0 9000' $TESTDIR1/original \
+ >> $seqres.full
+cp --reflink $TESTDIR1/original $TESTDIR1/copy
+
+_verify_reflink $TESTDIR1/original $TESTDIR1/copy
+
+echo "Move orig & reflink copy to subdir and md5sum:"
+mkdir $TESTDIR1/subdir
+mv $TESTDIR1/original $TESTDIR1/subdir/original_moved
+mv $TESTDIR1/copy $TESTDIR1/subdir/copy_moved
+_verify_reflink $TESTDIR1/subdir/original_moved \
+ $TESTDIR1/subdir/copy_moved
+
+md5sum $TESTDIR1/subdir/original_moved | _filter_test_dir
+md5sum $TESTDIR1/subdir/copy_moved | _filter_test_dir
+
+echo "remove orig from subdir and md5sum reflink copy:"
+rm $TESTDIR1/subdir/original_moved
+md5sum $TESTDIR1/subdir/copy_moved | _filter_test_dir
+rm -rf $TESTDIR1/subdir
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/802.out b/tests/generic/802.out
new file mode 100644
index 0000000..c20e16e
--- /dev/null
+++ b/tests/generic/802.out
@@ -0,0 +1,7 @@
+QA output created by 802
+Create the original files and reflink dirs
+Move orig & reflink copy to subdir and md5sum:
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-802/subdir/original_moved
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-802/subdir/copy_moved
+remove orig from subdir and md5sum reflink copy:
+42d69d1a6d333a7ebdf64792a555e392 TEST_DIR/test-802/subdir/copy_moved
diff --git a/tests/generic/group b/tests/generic/group
index 1dd4269..d9421c5 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -208,3 +208,6 @@
323 auto aio stress
324 auto fsr quick
325 auto quick data log
+800 auto quick clone
+801 auto quick clone
+802 auto quick clone
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 02/11] generic/80[0-2]: support xfs in addition to btrfs
2015-11-11 19:26 ` Darrick J. Wong
@ 2015-11-11 19:26 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:26 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Modify the reflink tests to support xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
common/rc | 42 ++++++------
common/reflink | 179 +++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/btrfs/029 | 1
tests/btrfs/031 | 1
tests/btrfs/108 | 1
tests/btrfs/109 | 1
tests/generic/800 | 3 +
tests/generic/801 | 3 +
tests/generic/802 | 3 +
9 files changed, 210 insertions(+), 24 deletions(-)
create mode 100644 common/reflink
diff --git a/common/rc b/common/rc
index adf1edf..c016673 100644
--- a/common/rc
+++ b/common/rc
@@ -82,6 +82,27 @@ _md5_checksum()
md5sum $1 | cut -d ' ' -f1
}
+# Write a byte into a range of a file
+_pwrite_byte() {
+ pattern="$1"
+ offset="$2"
+ len="$3"
+ file="$4"
+ xfs_io_args="$5"
+
+ "$XFS_IO_PROG" $xfs_io_args -f -c "pwrite -S $pattern $offset $len" "$file"
+}
+
+# mmap-write a byte into a range of a file
+_mwrite_byte() {
+ pattern="$1"
+ offset="$2"
+ len="$3"
+ mmap_len="$4"
+ file="$5"
+
+ "$XFS_IO_PROG" -f -c "mmap -rw 0 $mmap_len" -c "pwrite -S $pattern $offset $len" "$file"
+}
# ls -l w/ selinux sometimes puts a dot at the end:
# -rwxrw-r--. id1 id2 file1
@@ -2569,12 +2590,6 @@ _require_ugid_map()
fi
}
-_require_cp_reflink()
-{
- cp --help | grep -q reflink || \
- _notrun "This test requires a cp with --reflink support."
-}
-
_require_fssum()
{
FSSUM_PROG=$here/src/fssum
@@ -2588,21 +2603,6 @@ _require_cloner()
_notrun "cloner binary not present at $CLONER_PROG"
}
-# Given 2 files, verify that they have the same mapping but different
-# inodes - i.e. an undisturbed reflink
-# Silent if so, make noise if not
-_verify_reflink()
-{
- # not a hard link or symlink?
- cmp -s <(stat -c '%i' $1) <(stat -c '%i' $2) \
- && echo "$1 and $2 are not reflinks: same inode number"
-
- # same mapping?
- diff -u <($XFS_IO_PROG -c "fiemap" $1 | grep -v $1) \
- <($XFS_IO_PROG -c "fiemap" $2 | grep -v $2) \
- || echo "$1 and $2 are not reflinks: different extents"
-}
-
_require_atime()
{
if [ "$FSTYP" == "nfs" ]; then
diff --git a/common/reflink b/common/reflink
new file mode 100644
index 0000000..d65816b
--- /dev/null
+++ b/common/reflink
@@ -0,0 +1,179 @@
+##/bin/bash
+# Routines for reflinking, deduping, and comparing parts of files.
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle. All Rights Reserved.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+#
+# Contact information: Oracle Corporation, 500 Oracle Parkway,
+# Redwood Shores, CA 94065, USA, or: http://www.oracle.com/
+#-----------------------------------------------------------------------
+
+# Check that cp has a reflink argument
+_require_cp_reflink()
+{
+ cp --help | grep -q reflink || \
+ _notrun "This test requires a cp with --reflink support."
+}
+
+# Given 2 files, verify that they have the same mapping but different
+# inodes - i.e. an undisturbed reflink
+# Silent if so, make noise if not
+_verify_reflink()
+{
+ # not a hard link or symlink?
+ cmp -s <(stat -c '%i' $1) <(stat -c '%i' $2) \
+ && echo "$1 and $2 are not reflinks: same inode number"
+
+ # same mapping?
+ diff -u <($XFS_IO_PROG -c "fiemap" $1 | grep -v $1) \
+ <($XFS_IO_PROG -c "fiemap" $2 | grep -v $2) \
+ || echo "$1 and $2 are not reflinks: different extents"
+}
+
+# New reflink/dedupe helpers
+
+# this test requires the test fs support reflink...
+_require_test_reflink()
+{
+ _require_test
+ _require_xfs_io_command "reflink"
+
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file1" > /dev/null
+ "$XFS_IO_PROG" -f -c "reflink $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" > /dev/null
+ if [ ! -s "$TEST_DIR/file2" ]; then
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+ _notrun "Reflink not supported by test filesystem type: $FSTYP"
+ fi
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+}
+
+# this test requires the scratch fs support reflink...
+_require_scratch_reflink()
+{
+ _require_scratch
+ _require_xfs_io_command "reflink"
+
+ _scratch_mkfs > /dev/null
+ _scratch_mount
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file1" > /dev/null
+ "$XFS_IO_PROG" -f -c "reflink $SCRATCH_MNT/file1 0 0 65536" "$SCRATCH_MNT/file2" > /dev/null
+ if [ ! -s "$SCRATCH_MNT/file2" ]; then
+ _scratch_unmount
+ _notrun "Reflink not supported by scratch filesystem type: $FSTYP"
+ fi
+ _scratch_unmount
+}
+
+# this test requires the test fs support dedupe...
+_require_test_dedupe()
+{
+ _require_test
+ _require_xfs_io_command "dedupe"
+
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file1" > /dev/null
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file2" > /dev/null
+ testio="$("$XFS_IO_PROG" -f -c "dedupe $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" 2>&1)"
+ echo $testio | grep -q "Operation not supported" && \
+ _notrun "Dedupe not supported by test filesystem type: $FSTYP"
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+}
+
+# this test requires the scratch fs support dedupe...
+_require_scratch_dedupe()
+{
+ _require_scratch
+ _require_xfs_io_command "dedupe"
+
+ _scratch_mkfs > /dev/null
+ _scratch_mount
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file1" > /dev/null
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file2" > /dev/null
+ testio="$("$XFS_IO_PROG" -f -c "dedupe $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" 2>&1)"
+ echo $testio | grep -q "Operation not supported" && \
+ _notrun "Dedupe not supported by test filesystem type: $FSTYP"
+ _scratch_unmount
+}
+
+# Prints a range of a file as a hex dump
+_read_range() {
+ file="$1"
+ offset="$2"
+ len="$3"
+ xfs_io_args="$4"
+
+ $XFS_IO_PROG $xfs_io_args -f -c "pread -q -v $offset $len" "$file" | cut -d ' ' -f '3-18'
+}
+
+# Compare ranges of two files
+_compare_range() {
+ file1="$1"
+ offset1="$2"
+ file2="$3"
+ offset2="$4"
+ len="$5"
+
+ cmp -s <(_read_range "$file1" "$offset1" "$len") \
+ <(_read_range "$file2" "$offset2" "$len")
+}
+
+# Prints the md5 checksum of a hexdump of a part of a given file
+_md5_range_checksum() {
+ file="$1"
+ offset="$2"
+ len="$3"
+
+ md5sum <(_read_range "$file" "$offset" "$len") | cut -d ' ' -f 1
+}
+
+# Reflink some file1 into file2 via cp
+_cp_reflink() {
+ file1="$1"
+ file2="$2"
+
+ cp --reflink=always "$file1" "$file2"
+}
+
+# Reflink some file1 into file2
+_reflink() {
+ file1="$1"
+ file2="$2"
+
+ "$XFS_IO_PROG" -f -c "reflink $file1" "$file2"
+}
+
+# Reflink some part of file1 into another part of file2
+_reflink_range() {
+ file1="$1"
+ offset1="$2"
+ file2="$3"
+ offset2="$4"
+ len="$5"
+
+ "$XFS_IO_PROG" -f -c "reflink $file1 $offset1 $offset2 $len" "$file2"
+}
+
+# Dedupe some part of file1 into another part of file2
+_dedupe_range() {
+ file1="$1"
+ offset1="$2"
+ file2="$3"
+ offset2="$4"
+ len="$5"
+
+ "$XFS_IO_PROG" -f -c "dedupe $file1 $offset1 $offset2 $len" "$file2"
+}
diff --git a/tests/btrfs/029 b/tests/btrfs/029
index 0b77b33..175317a 100755
--- a/tests/btrfs/029
+++ b/tests/btrfs/029
@@ -47,6 +47,7 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
_supported_fs btrfs
diff --git a/tests/btrfs/031 b/tests/btrfs/031
index bcd332c..c5763da 100755
--- a/tests/btrfs/031
+++ b/tests/btrfs/031
@@ -48,6 +48,7 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
_supported_fs btrfs
diff --git a/tests/btrfs/108 b/tests/btrfs/108
index 5e3a403..18e5b99 100755
--- a/tests/btrfs/108
+++ b/tests/btrfs/108
@@ -41,6 +41,7 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
_supported_fs btrfs
diff --git a/tests/btrfs/109 b/tests/btrfs/109
index e2aeb73..b86336c 100755
--- a/tests/btrfs/109
+++ b/tests/btrfs/109
@@ -41,6 +41,7 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
_supported_fs btrfs
diff --git a/tests/generic/800 b/tests/generic/800
index a71f11a..1e73c33 100755
--- a/tests/generic/800
+++ b/tests/generic/800
@@ -43,9 +43,10 @@ _cleanup()
# get standard environment, filters and checks
. common/rc
. common/filter
+. common/reflink
# real QA test starts here
-_supported_fs btrfs
+_require_test_reflink
_supported_os Linux
_require_xfs_io_command "fiemap"
diff --git a/tests/generic/801 b/tests/generic/801
index b21c44b..2facea9 100755
--- a/tests/generic/801
+++ b/tests/generic/801
@@ -43,9 +43,10 @@ _cleanup()
# get standard environment, filters and checks
. common/rc
. common/filter
+. common/reflink
# real QA test starts here
-_supported_fs btrfs
+_require_test_reflink
_supported_os Linux
_require_xfs_io_command "fiemap"
diff --git a/tests/generic/802 b/tests/generic/802
index afd8513..aaca2b4 100755
--- a/tests/generic/802
+++ b/tests/generic/802
@@ -41,9 +41,10 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
-_supported_fs btrfs
+_require_test_reflink
_supported_os Linux
_require_xfs_io_command "fiemap"
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH 02/11] generic/80[0-2]: support xfs in addition to btrfs
@ 2015-11-11 19:26 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:26 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Modify the reflink tests to support xfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
common/rc | 42 ++++++------
common/reflink | 179 +++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/btrfs/029 | 1
tests/btrfs/031 | 1
tests/btrfs/108 | 1
tests/btrfs/109 | 1
tests/generic/800 | 3 +
tests/generic/801 | 3 +
tests/generic/802 | 3 +
9 files changed, 210 insertions(+), 24 deletions(-)
create mode 100644 common/reflink
diff --git a/common/rc b/common/rc
index adf1edf..c016673 100644
--- a/common/rc
+++ b/common/rc
@@ -82,6 +82,27 @@ _md5_checksum()
md5sum $1 | cut -d ' ' -f1
}
+# Write a byte into a range of a file
+_pwrite_byte() {
+ pattern="$1"
+ offset="$2"
+ len="$3"
+ file="$4"
+ xfs_io_args="$5"
+
+ "$XFS_IO_PROG" $xfs_io_args -f -c "pwrite -S $pattern $offset $len" "$file"
+}
+
+# mmap-write a byte into a range of a file
+_mwrite_byte() {
+ pattern="$1"
+ offset="$2"
+ len="$3"
+ mmap_len="$4"
+ file="$5"
+
+ "$XFS_IO_PROG" -f -c "mmap -rw 0 $mmap_len" -c "pwrite -S $pattern $offset $len" "$file"
+}
# ls -l w/ selinux sometimes puts a dot at the end:
# -rwxrw-r--. id1 id2 file1
@@ -2569,12 +2590,6 @@ _require_ugid_map()
fi
}
-_require_cp_reflink()
-{
- cp --help | grep -q reflink || \
- _notrun "This test requires a cp with --reflink support."
-}
-
_require_fssum()
{
FSSUM_PROG=$here/src/fssum
@@ -2588,21 +2603,6 @@ _require_cloner()
_notrun "cloner binary not present at $CLONER_PROG"
}
-# Given 2 files, verify that they have the same mapping but different
-# inodes - i.e. an undisturbed reflink
-# Silent if so, make noise if not
-_verify_reflink()
-{
- # not a hard link or symlink?
- cmp -s <(stat -c '%i' $1) <(stat -c '%i' $2) \
- && echo "$1 and $2 are not reflinks: same inode number"
-
- # same mapping?
- diff -u <($XFS_IO_PROG -c "fiemap" $1 | grep -v $1) \
- <($XFS_IO_PROG -c "fiemap" $2 | grep -v $2) \
- || echo "$1 and $2 are not reflinks: different extents"
-}
-
_require_atime()
{
if [ "$FSTYP" == "nfs" ]; then
diff --git a/common/reflink b/common/reflink
new file mode 100644
index 0000000..d65816b
--- /dev/null
+++ b/common/reflink
@@ -0,0 +1,179 @@
+##/bin/bash
+# Routines for reflinking, deduping, and comparing parts of files.
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle. All Rights Reserved.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+#
+# Contact information: Oracle Corporation, 500 Oracle Parkway,
+# Redwood Shores, CA 94065, USA, or: http://www.oracle.com/
+#-----------------------------------------------------------------------
+
+# Check that cp has a reflink argument
+_require_cp_reflink()
+{
+ cp --help | grep -q reflink || \
+ _notrun "This test requires a cp with --reflink support."
+}
+
+# Given 2 files, verify that they have the same mapping but different
+# inodes - i.e. an undisturbed reflink
+# Silent if so, make noise if not
+_verify_reflink()
+{
+ # not a hard link or symlink?
+ cmp -s <(stat -c '%i' $1) <(stat -c '%i' $2) \
+ && echo "$1 and $2 are not reflinks: same inode number"
+
+ # same mapping?
+ diff -u <($XFS_IO_PROG -c "fiemap" $1 | grep -v $1) \
+ <($XFS_IO_PROG -c "fiemap" $2 | grep -v $2) \
+ || echo "$1 and $2 are not reflinks: different extents"
+}
+
+# New reflink/dedupe helpers
+
+# this test requires the test fs support reflink...
+_require_test_reflink()
+{
+ _require_test
+ _require_xfs_io_command "reflink"
+
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file1" > /dev/null
+ "$XFS_IO_PROG" -f -c "reflink $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" > /dev/null
+ if [ ! -s "$TEST_DIR/file2" ]; then
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+ _notrun "Reflink not supported by test filesystem type: $FSTYP"
+ fi
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+}
+
+# this test requires the scratch fs support reflink...
+_require_scratch_reflink()
+{
+ _require_scratch
+ _require_xfs_io_command "reflink"
+
+ _scratch_mkfs > /dev/null
+ _scratch_mount
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file1" > /dev/null
+ "$XFS_IO_PROG" -f -c "reflink $SCRATCH_MNT/file1 0 0 65536" "$SCRATCH_MNT/file2" > /dev/null
+ if [ ! -s "$SCRATCH_MNT/file2" ]; then
+ _scratch_unmount
+ _notrun "Reflink not supported by scratch filesystem type: $FSTYP"
+ fi
+ _scratch_unmount
+}
+
+# this test requires the test fs support dedupe...
+_require_test_dedupe()
+{
+ _require_test
+ _require_xfs_io_command "dedupe"
+
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file1" > /dev/null
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file2" > /dev/null
+ testio="$("$XFS_IO_PROG" -f -c "dedupe $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" 2>&1)"
+ echo $testio | grep -q "Operation not supported" && \
+ _notrun "Dedupe not supported by test filesystem type: $FSTYP"
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+}
+
+# this test requires the scratch fs support dedupe...
+_require_scratch_dedupe()
+{
+ _require_scratch
+ _require_xfs_io_command "dedupe"
+
+ _scratch_mkfs > /dev/null
+ _scratch_mount
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file1" > /dev/null
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file2" > /dev/null
+ testio="$("$XFS_IO_PROG" -f -c "dedupe $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" 2>&1)"
+ echo $testio | grep -q "Operation not supported" && \
+ _notrun "Dedupe not supported by test filesystem type: $FSTYP"
+ _scratch_unmount
+}
+
+# Prints a range of a file as a hex dump
+_read_range() {
+ file="$1"
+ offset="$2"
+ len="$3"
+ xfs_io_args="$4"
+
+ $XFS_IO_PROG $xfs_io_args -f -c "pread -q -v $offset $len" "$file" | cut -d ' ' -f '3-18'
+}
+
+# Compare ranges of two files
+_compare_range() {
+ file1="$1"
+ offset1="$2"
+ file2="$3"
+ offset2="$4"
+ len="$5"
+
+ cmp -s <(_read_range "$file1" "$offset1" "$len") \
+ <(_read_range "$file2" "$offset2" "$len")
+}
+
+# Prints the md5 checksum of a hexdump of a part of a given file
+_md5_range_checksum() {
+ file="$1"
+ offset="$2"
+ len="$3"
+
+ md5sum <(_read_range "$file" "$offset" "$len") | cut -d ' ' -f 1
+}
+
+# Reflink some file1 into file2 via cp
+_cp_reflink() {
+ file1="$1"
+ file2="$2"
+
+ cp --reflink=always "$file1" "$file2"
+}
+
+# Reflink some file1 into file2
+_reflink() {
+ file1="$1"
+ file2="$2"
+
+ "$XFS_IO_PROG" -f -c "reflink $file1" "$file2"
+}
+
+# Reflink some part of file1 into another part of file2
+_reflink_range() {
+ file1="$1"
+ offset1="$2"
+ file2="$3"
+ offset2="$4"
+ len="$5"
+
+ "$XFS_IO_PROG" -f -c "reflink $file1 $offset1 $offset2 $len" "$file2"
+}
+
+# Dedupe some part of file1 into another part of file2
+_dedupe_range() {
+ file1="$1"
+ offset1="$2"
+ file2="$3"
+ offset2="$4"
+ len="$5"
+
+ "$XFS_IO_PROG" -f -c "dedupe $file1 $offset1 $offset2 $len" "$file2"
+}
diff --git a/tests/btrfs/029 b/tests/btrfs/029
index 0b77b33..175317a 100755
--- a/tests/btrfs/029
+++ b/tests/btrfs/029
@@ -47,6 +47,7 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
_supported_fs btrfs
diff --git a/tests/btrfs/031 b/tests/btrfs/031
index bcd332c..c5763da 100755
--- a/tests/btrfs/031
+++ b/tests/btrfs/031
@@ -48,6 +48,7 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
_supported_fs btrfs
diff --git a/tests/btrfs/108 b/tests/btrfs/108
index 5e3a403..18e5b99 100755
--- a/tests/btrfs/108
+++ b/tests/btrfs/108
@@ -41,6 +41,7 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
_supported_fs btrfs
diff --git a/tests/btrfs/109 b/tests/btrfs/109
index e2aeb73..b86336c 100755
--- a/tests/btrfs/109
+++ b/tests/btrfs/109
@@ -41,6 +41,7 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
_supported_fs btrfs
diff --git a/tests/generic/800 b/tests/generic/800
index a71f11a..1e73c33 100755
--- a/tests/generic/800
+++ b/tests/generic/800
@@ -43,9 +43,10 @@ _cleanup()
# get standard environment, filters and checks
. common/rc
. common/filter
+. common/reflink
# real QA test starts here
-_supported_fs btrfs
+_require_test_reflink
_supported_os Linux
_require_xfs_io_command "fiemap"
diff --git a/tests/generic/801 b/tests/generic/801
index b21c44b..2facea9 100755
--- a/tests/generic/801
+++ b/tests/generic/801
@@ -43,9 +43,10 @@ _cleanup()
# get standard environment, filters and checks
. common/rc
. common/filter
+. common/reflink
# real QA test starts here
-_supported_fs btrfs
+_require_test_reflink
_supported_os Linux
_require_xfs_io_command "fiemap"
diff --git a/tests/generic/802 b/tests/generic/802
index afd8513..aaca2b4 100755
--- a/tests/generic/802
+++ b/tests/generic/802
@@ -41,9 +41,10 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
-_supported_fs btrfs
+_require_test_reflink
_supported_os Linux
_require_xfs_io_command "fiemap"
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 03/11] reflink: basic tests of the reflink and dedupe ioctls
2015-11-11 19:26 ` Darrick J. Wong
@ 2015-11-11 19:26 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:26 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Test the operation of the btrfs (and now xfs) reflink and dedupe
ioctls at various file offsets and with matching and nonmatching
files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/803 | 92 +++++++++++++++++++++++++++
tests/generic/803.out | 8 ++
tests/generic/804 | 93 +++++++++++++++++++++++++++
tests/generic/804.out | 11 +++
tests/generic/805 | 170 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/805.out | 30 +++++++++
tests/generic/806 | 92 +++++++++++++++++++++++++++
tests/generic/806.out | 8 ++
tests/generic/807 | 92 +++++++++++++++++++++++++++
tests/generic/807.out | 12 +++
tests/generic/817 | 128 +++++++++++++++++++++++++++++++++++++
tests/generic/817.out | 16 +++++
tests/generic/818 | 128 +++++++++++++++++++++++++++++++++++++
tests/generic/818.out | 17 +++++
tests/generic/819 | 131 ++++++++++++++++++++++++++++++++++++++
tests/generic/819.out | 8 ++
tests/generic/group | 8 ++
17 files changed, 1044 insertions(+)
create mode 100755 tests/generic/803
create mode 100644 tests/generic/803.out
create mode 100755 tests/generic/804
create mode 100644 tests/generic/804.out
create mode 100755 tests/generic/805
create mode 100644 tests/generic/805.out
create mode 100755 tests/generic/806
create mode 100644 tests/generic/806.out
create mode 100755 tests/generic/807
create mode 100644 tests/generic/807.out
create mode 100755 tests/generic/817
create mode 100644 tests/generic/817.out
create mode 100755 tests/generic/818
create mode 100644 tests/generic/818.out
create mode 100755 tests/generic/819
create mode 100644 tests/generic/819.out
diff --git a/tests/generic/803 b/tests/generic/803
new file mode 100755
index 0000000..14c9e98
--- /dev/null
+++ b/tests/generic/803
@@ -0,0 +1,92 @@
+#! /bin/bash
+# FS QA Test No. 803
+#
+# Ensure that we can reflink parts of two identical files:
+# - Reflink identical parts of two identical files
+# - Check that we still have identical contents
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file2" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 8)) \
+ || echo "Files do not match"
+
+echo "Reflink the middle blocks together"
+free_before="$(stat -f -c '%a' "$TESTDIR")"
+_reflink_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) >> "$seqres.full"
+_test_remount
+free_after="$(stat -f -c '%a' "$TESTDIR")"
+echo "freesp changed by $free_before -> $free_after" >> "$seqres.full"
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 4)) \
+ || echo "Start sections do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) \
+ || echo "Middle sections do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 6)) "$TESTDIR/file2" \
+ $((BLKSZ * 6)) $((BLKSZ * 2)) \
+ || echo "End sections do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/803.out b/tests/generic/803.out
new file mode 100644
index 0000000..09099aa
--- /dev/null
+++ b/tests/generic/803.out
@@ -0,0 +1,8 @@
+QA output created by 803
+Create the original files
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-803/file1
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-803/file2
+Reflink the middle blocks together
+Compare sections
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-803/file1
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-803/file2
diff --git a/tests/generic/804 b/tests/generic/804
new file mode 100755
index 0000000..611ad51
--- /dev/null
+++ b/tests/generic/804
@@ -0,0 +1,93 @@
+#! /bin/bash
+# FS QA Test No. 804
+#
+# Ensuring that we can reflink non-matching parts of files:
+# - Reflink identical ranges of two different files
+# - Check that the non-linked ranges still do not match
+# - Check that we end up with identical contents in the linked ranges
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file2" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 8)) \
+ || echo "Files do not match (intentional)"
+
+echo "Reflink the middle blocks together"
+free_before="$(stat -f -c '%a' "$TESTDIR")"
+_reflink_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) >> "$seqres.full"
+_test_remount
+free_after="$(stat -f -c '%a' "$TESTDIR")"
+echo "freesp changed by $free_before -> $free_after" >> "$seqres.full"
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 4)) \
+ || echo "Start sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) \
+ || echo "Middle sections do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 6)) "$TESTDIR/file2" \
+ $((BLKSZ * 6)) $((BLKSZ * 2)) \
+ || echo "End sections do not match (intentional)"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/804.out b/tests/generic/804.out
new file mode 100644
index 0000000..ad40ca2
--- /dev/null
+++ b/tests/generic/804.out
@@ -0,0 +1,11 @@
+QA output created by 804
+Create the original files
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-804/file1
+5e3501f97fd2669babfcbd3e1972e833 TEST_DIR/test-804/file2
+Files do not match (intentional)
+Reflink the middle blocks together
+Compare sections
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-804/file1
+f7f9e44d37909868014e9151f5293ab0 TEST_DIR/test-804/file2
+Start sections do not match (intentional)
+End sections do not match (intentional)
diff --git a/tests/generic/805 b/tests/generic/805
new file mode 100755
index 0000000..41ef722
--- /dev/null
+++ b/tests/generic/805
@@ -0,0 +1,170 @@
+#! /bin/bash
+# FS QA Test No. 805
+#
+# Reflinking two sets of files together:
+# - Reflink identical parts of two identical files
+# - Reflink identical parts of two other identical files
+# - Reflink identical parts of all four files
+# - Check that we end up with identical contents
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 8)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ * 8)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x63 0 $((BLKSZ * 8)) "$TESTDIR/file3" >> "$seqres.full"
+_pwrite_byte 0x64 0 $((BLKSZ * 8)) "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 8)) \
+ || echo "Files 1-2 do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file3" 0 $((BLKSZ * 8)) \
+ || echo "Files 1-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file4" 0 $((BLKSZ * 8)) \
+ || echo "Files 1-4 do not match (intentional)"
+
+echo "Reflink the first four blocks together, 1-2 3-4"
+free_before="$(stat -f -c '%a' "$TESTDIR")"
+_reflink_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 4)) >> "$seqres.full"
+_reflink_range "$TESTDIR/file3" 0 "$TESTDIR/file4" 0 $((BLKSZ * 4)) >> "$seqres.full"
+_test_remount
+free_after="$(stat -f -c '%a' "$TESTDIR")"
+echo "freesp changed by $free_before -> $free_after" >> "$seqres.full"
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 4)) \
+ || echo "Sections of file 1-2 do not match"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file3" 0 $((BLKSZ * 4)) \
+ || echo "Sections of file 1-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file4" 0 $((BLKSZ * 4)) \
+ || echo "Sections of file 1-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 $((BLKSZ * 4)) \
+ || echo "Sections of file 2-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file4" 0 $((BLKSZ * 4)) \
+ || echo "Sections of file 2-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file3" 0 "$TESTDIR/file4" 0 $((BLKSZ * 4)) \
+ || echo "Sections of file 3-4 do not match"
+
+echo "Reflink the first two blocks together, 1-3 1-4"
+free_before="$(stat -f -c '%a' $TESTDIR)"
+_reflink_range "$TESTDIR/file1" 0 "$TESTDIR/file3" 0 $((BLKSZ * 2)) >> "$seqres.full"
+_reflink_range "$TESTDIR/file1" 0 "$TESTDIR/file4" 0 $((BLKSZ * 2)) >> "$seqres.full"
+_test_remount
+free_after="$(stat -f -c '%a' $TESTDIR)"
+echo "freesp changed by $free_before -> $free_after" >> "$seqres.full"
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 2)) \
+ || echo "Sections of files 1-2 do not match"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file3" 0 $((BLKSZ * 2)) \
+ || echo "Sections of files 1-3 do not match"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file4" 0 $((BLKSZ * 2)) \
+ || echo "Sections of files 1-4 do not match"
+
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 $((BLKSZ * 2)) \
+ || echo "Sections of files 2-3 do not match"
+
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file4" 0 $((BLKSZ * 2)) \
+ || echo "Sections of files 2-4 do not match"
+
+_compare_range "$TESTDIR/file3" 0 "$TESTDIR/file4" 0 $((BLKSZ * 2)) \
+ || echo "Sections of files 3-4 do not match"
+
+echo "Compare previously reflinked sections"
+_compare_range "$TESTDIR/file1" $((BLKSZ * 2)) "$TESTDIR/file2" \
+ $((BLKSZ * 2)) $((BLKSZ * 2)) \
+ || echo "Sections of file 1-2 do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 2)) "$TESTDIR/file3" \
+ $((BLKSZ * 2)) $((BLKSZ * 2)) \
+ || echo "Sections of file 1-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 2)) "$TESTDIR/file4" \
+ $((BLKSZ * 2)) $((BLKSZ * 2)) \
+ || echo "Sections of file 1-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 2)) "$TESTDIR/file3" \
+ $((BLKSZ * 2)) $((BLKSZ * 2)) \
+ || echo "Sections of file 2-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 2)) "$TESTDIR/file4" \
+ $((BLKSZ * 2)) $((BLKSZ * 2)) \
+ || echo "Sections of file 2-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file3" $((BLKSZ * 2)) "$TESTDIR/file4" \
+ $((BLKSZ * 2)) $((BLKSZ * 2)) \
+ || echo "Sections of file 3-4 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/805.out b/tests/generic/805.out
new file mode 100644
index 0000000..82f9658
--- /dev/null
+++ b/tests/generic/805.out
@@ -0,0 +1,30 @@
+QA output created by 805
+Create the original files
+30c2557e8302a5beb290c71520d87f42 TEST_DIR/test-805/file1
+efb787f7990e43c7dc30565d8cc344d4 TEST_DIR/test-805/file2
+c83f38d4622a78b74e3480634194b08f TEST_DIR/test-805/file3
+1c11fd3151d2229f5cf43903386aa432 TEST_DIR/test-805/file4
+Files 1-2 do not match (intentional)
+Files 1-3 do not match (intentional)
+Files 1-4 do not match (intentional)
+Reflink the first four blocks together, 1-2 3-4
+Compare sections
+30c2557e8302a5beb290c71520d87f42 TEST_DIR/test-805/file1
+63bdb182cdf03a8a19e83234d869d00a TEST_DIR/test-805/file2
+c83f38d4622a78b74e3480634194b08f TEST_DIR/test-805/file3
+dc2ae3db14e97fad93faf939170b085c TEST_DIR/test-805/file4
+Sections of file 1-3 do not match (intentional)
+Sections of file 1-4 do not match (intentional)
+Sections of file 2-3 do not match (intentional)
+Sections of file 2-4 do not match (intentional)
+Reflink the first two blocks together, 1-3 1-4
+Compare sections
+30c2557e8302a5beb290c71520d87f42 TEST_DIR/test-805/file1
+63bdb182cdf03a8a19e83234d869d00a TEST_DIR/test-805/file2
+89a444ff9d6af60ba487e9a0ca2161e2 TEST_DIR/test-805/file3
+0c263058794a54c5e197ece52386f5be TEST_DIR/test-805/file4
+Compare previously reflinked sections
+Sections of file 1-3 do not match (intentional)
+Sections of file 1-4 do not match (intentional)
+Sections of file 2-3 do not match (intentional)
+Sections of file 2-4 do not match (intentional)
diff --git a/tests/generic/806 b/tests/generic/806
new file mode 100755
index 0000000..ab973e3
--- /dev/null
+++ b/tests/generic/806
@@ -0,0 +1,92 @@
+#! /bin/bash
+# FS QA Test No. 806
+#
+# Ensure that we can dedupe parts of two files:
+# - Dedupe identical parts of two identical files
+# - Check that still have identical contents
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file2" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 8)) \
+ || echo "Files 1-2 do not match (intentional)"
+
+echo "Dedupe the middle blocks together"
+free_before="$(stat -f -c '%a' "$TESTDIR")"
+_dedupe_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) >> "$seqres.full"
+_test_remount
+free_after="$(stat -f -c '%a' "$TESTDIR")"
+echo "freesp changed by $free_before -> $free_after" >> "$seqres.full"
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 4)) \
+ || echo "Start sections do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) \
+ || echo "Middle sections do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 6)) "$TESTDIR/file2" \
+ $((BLKSZ * 6)) $((BLKSZ * 2)) \
+ || echo "End sections do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/806.out b/tests/generic/806.out
new file mode 100644
index 0000000..781b545
--- /dev/null
+++ b/tests/generic/806.out
@@ -0,0 +1,8 @@
+QA output created by 806
+Create the original files
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-806/file1
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-806/file2
+Dedupe the middle blocks together
+Compare sections
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-806/file1
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-806/file2
diff --git a/tests/generic/807 b/tests/generic/807
new file mode 100755
index 0000000..6f5168a
--- /dev/null
+++ b/tests/generic/807
@@ -0,0 +1,92 @@
+#! /bin/bash
+# FS QA Test No. 807
+#
+# Ensuring that we cannot dedupe non-matching parts of files:
+# - Fail to dedupe non-identical parts of two different files
+# - Check that nothing changes in either file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_dedupe
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file2" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 "$((BLKSZ * 8))" \
+ || echo "Files 1-2 do not match (intentional)"
+
+echo "(Fail to) dedupe the middle blocks together"
+free_before="$(stat -f -c '%a' "$TESTDIR")"
+_dedupe_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) >> "$seqres.full"
+_test_remount
+free_after="$(stat -f -c '%a' "$TESTDIR")"
+echo "freesp changed by $free_before -> $free_after" >> "$seqres.full"
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 4)) \
+ || echo "Start sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) \
+ || echo "Middle sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 6)) "$TESTDIR/file2" \
+ $((BLKSZ * 6)) $((BLKSZ * 2)) \
+ || echo "End sections do not match (intentional)"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/807.out b/tests/generic/807.out
new file mode 100644
index 0000000..424d039
--- /dev/null
+++ b/tests/generic/807.out
@@ -0,0 +1,12 @@
+QA output created by 807
+Create the original files
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-807/file1
+5e3501f97fd2669babfcbd3e1972e833 TEST_DIR/test-807/file2
+Files 1-2 do not match (intentional)
+(Fail to) dedupe the middle blocks together
+Compare sections
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-807/file1
+5e3501f97fd2669babfcbd3e1972e833 TEST_DIR/test-807/file2
+Start sections do not match (intentional)
+Middle sections do not match (intentional)
+End sections do not match (intentional)
diff --git a/tests/generic/817 b/tests/generic/817
new file mode 100755
index 0000000..667a79e
--- /dev/null
+++ b/tests/generic/817
@@ -0,0 +1,128 @@
+#! /bin/bash
+# FS QA Test No. 817
+#
+# Ensure that we can reflink the last block of a file whose size isn't
+# block-aligned.
+# - Create two 'a' files file whose size isn't block-aligned.
+# - Create two 'b' files file whose size isn't block-aligned.
+# - Reflink the last block of file1 to the last block in file2 and file3.
+# - Check that files 1-2 match, 3-4 don't match, and that nothing matches 3.
+# - Check that the ends of 1-3 match, and 1-3 do not match the end of file4.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ + 37)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ + 37)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ + 37)) "$TESTDIR/file3" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ + 37)) "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "Reflink the last blocks together, 1-2 1-3"
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ 37 >> "$seqres.full"
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file3" $BLKSZ 37 >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+echo "Compare files"
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should match"
+
+echo "Compare sections"
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ 37 \
+ || echo "End sections of files 1-2 do not match"
+
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file3" $BLKSZ 37 \
+ || echo "End sections of files 1-3 do not match"
+
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file4" $BLKSZ 37 \
+ || echo "End sections of files 1-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" $BLKSZ "$TESTDIR/file3" $BLKSZ 37 \
+ || echo "End sections of files 2-3 do not match"
+
+_compare_range "$TESTDIR/file2" $BLKSZ "$TESTDIR/file4" $BLKSZ 37 \
+ || echo "End sections of files 2-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file3" $BLKSZ "$TESTDIR/file4" $BLKSZ 37 \
+ || echo "End sections of files 3-4 do not match (intentional)"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/817.out b/tests/generic/817.out
new file mode 100644
index 0000000..dd6b1ee
--- /dev/null
+++ b/tests/generic/817.out
@@ -0,0 +1,16 @@
+QA output created by 817
+Create the original files
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-817/file1
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-817/file2
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-817/file3
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-817/file4
+Reflink the last blocks together, 1-2 1-3
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-817/file1
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-817/file2
+e236f2fe789f0aa34b50e981a2f0243a TEST_DIR/test-817/file3
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-817/file4
+Compare files
+Compare sections
+End sections of files 1-4 do not match (intentional)
+End sections of files 2-4 do not match (intentional)
+End sections of files 3-4 do not match (intentional)
diff --git a/tests/generic/818 b/tests/generic/818
new file mode 100755
index 0000000..fba097d
--- /dev/null
+++ b/tests/generic/818
@@ -0,0 +1,128 @@
+#! /bin/bash
+# FS QA Test No. 818
+#
+# Ensure that we can dedupe the last block of a file whose size isn't
+# block-aligned.
+# - Create two 'a' files file whose size isn't block-aligned.
+# - Create two 'b' files file whose size isn't block-aligned.
+# - Dedupe the last block of file1 to the last block in file2 and file3.
+# - Check that files 1-2 match, and that 3-4 match.
+# - Check that the ends of 1-2 and 3-4 match, and that 1-3 don't match.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_dedupe
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ + 37)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ + 37)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ + 37)) "$TESTDIR/file3" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ + 37)) "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "Dedupe the last blocks together"
+_dedupe_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ 37 >> "$seqres.full"
+_dedupe_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file3" $BLKSZ 37 >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+echo "Compare files"
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "Compare sections"
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ 37 \
+ || echo "End sections of files 1-2 do not match"
+
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file3" $BLKSZ 37 \
+ || echo "End sections of files 1-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file4" $BLKSZ 37 \
+ || echo "End sections of files 1-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" $BLKSZ "$TESTDIR/file3" $BLKSZ 37 \
+ || echo "End sections of files 2-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" $BLKSZ "$TESTDIR/file4" $BLKSZ 37 \
+ || echo "End sections of files 2-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file3" $BLKSZ "$TESTDIR/file4" $BLKSZ 37 \
+ || echo "End sections of files 3-4 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/818.out b/tests/generic/818.out
new file mode 100644
index 0000000..f7e30bf
--- /dev/null
+++ b/tests/generic/818.out
@@ -0,0 +1,17 @@
+QA output created by 818
+Create the original files
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-818/file1
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-818/file2
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-818/file3
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-818/file4
+Dedupe the last blocks together
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-818/file1
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-818/file2
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-818/file3
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-818/file4
+Compare files
+Compare sections
+End sections of files 1-3 do not match (intentional)
+End sections of files 1-4 do not match (intentional)
+End sections of files 2-3 do not match (intentional)
+End sections of files 2-4 do not match (intentional)
diff --git a/tests/generic/819 b/tests/generic/819
new file mode 100755
index 0000000..918868a
--- /dev/null
+++ b/tests/generic/819
@@ -0,0 +1,131 @@
+#! /bin/bash
+# FS QA Test No. 819
+#
+# Ensure that we can reflink and dedupe blocks within the same file...
+# - Create a file with three distinct blocks ABB
+# - Reflink block zero to the multiple-of-three blocks
+# - Reflink block one to the multiple-of-five blocks
+# - Dedupe block two to the multiple-of-seven blocks
+# - Check that we successfully avoid deduping with holes, unwritten
+# extents, and non-matches; but actually dedupe real matches.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_test_dedupe
+_require_xfs_io_command "falloc"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $((BLKSZ * 2)) "$TESTDIR/file1" >> "$seqres.full"
+
+NR_BLKS=1024
+
+echo "fallocate half the file"
+"$XFS_IO_PROG" -f -c "falloc $((NR_BLKS * BLKSZ / 2)) $((NR_BLKS * BLKSZ / 2))" "$TESTDIR/file1" >> "$seqres.full"
+
+echo "Reflink block zero to the threes"
+seq 1 $((NR_BLKS / 3)) | while read nr; do
+ _reflink_range "$TESTDIR/file1" 0 "$TESTDIR/file1" $((nr * 3 * BLKSZ)) \
+ $BLKSZ >> "$seqres.full"
+done
+
+echo "Reflink block one to the fives"
+seq 1 $((NR_BLKS / 5)) | while read nr; do
+ _reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file1" \
+ $((nr * 5 * BLKSZ)) $BLKSZ >> "$seqres.full"
+done
+
+echo "Dedupe block two to the sevens"
+seq 1 $((NR_BLKS / 7)) | while read nr; do
+ _dedupe_range "$TESTDIR/file1" $((BLKSZ * 2)) "$TESTDIR/file1" \
+ $((nr * 7 * BLKSZ)) $BLKSZ >> "$seqres.full"
+done
+
+_test_remount
+
+echo "Check block mappings"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+
+crcZ=$(_md5_range_checksum /dev/zero 0 $BLKSZ)
+crc0=$(_md5_range_checksum "$TESTDIR/file1" 0 $BLKSZ)
+crc1=$(_md5_range_checksum "$TESTDIR/file1" $BLKSZ $BLKSZ)
+crc2=$(_md5_range_checksum "$TESTDIR/file1" $((BLKSZ * 2)) $BLKSZ)
+
+check_block() {
+ lblk="$1"
+ rem7=$((lblk % 7))
+ rem5=$((lblk % 5))
+ rem3=$((lblk % 3))
+
+ crc=$(_md5_range_checksum "$TESTDIR/file1" $((lblk * BLKSZ)) $BLKSZ)
+
+ if [ $rem7 -eq 0 ]; then
+ if [ $rem5 -eq 0 ]; then
+ test $crc2 = $crc || echo "lblk $lblk doesn't match block 2"
+ elif [ $rem3 -eq 0 ]; then
+ test $crc0 = $crc || echo "lblk $lblk doesn't match block 0"
+ elif [ $lblk -lt $((NR_BLKS / 2)) ]; then
+ test $crcZ = $crc || echo "lblk $lblk isn't zeroed"
+ fi
+ elif [ $rem5 -eq 0 ]; then
+ test $crc1 = $crc || echo "lblk $lblk doesn't match block 1"
+ elif [ $rem3 -eq 0 ]; then
+ test $crc0 = $crc || echo "lblk $lblk doesn't match block 0"
+ elif [ $lblk -lt $((NR_BLKS / 2)) ]; then
+ test $crcZ = $crc || echo "lblk $lblk isn't zeroed"
+ fi
+}
+
+seq 3 $((NR_BLKS - 1)) | while read lblk; do
+ err="$(check_block $lblk)"
+ test -n "$err" && echo "$lblk: $err"
+done
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/819.out b/tests/generic/819.out
new file mode 100644
index 0000000..203275d
--- /dev/null
+++ b/tests/generic/819.out
@@ -0,0 +1,8 @@
+QA output created by 819
+Create the original file blocks
+fallocate half the file
+Reflink block zero to the threes
+Reflink block one to the fives
+Dedupe block two to the sevens
+Check block mappings
+2ea37912bdbd71b9ed4734d3141cbe9c TEST_DIR/test-819/file1
diff --git a/tests/generic/group b/tests/generic/group
index d9421c5..7f25037 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -211,3 +211,11 @@
800 auto quick clone
801 auto quick clone
802 auto quick clone
+803 auto quick clone
+804 auto quick clone
+805 auto quick clone
+806 auto quick clone
+807 auto quick clone
+817 auto quick clone
+818 auto quick clone
+819 auto quick clone
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH 03/11] reflink: basic tests of the reflink and dedupe ioctls
@ 2015-11-11 19:26 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:26 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Test the operation of the btrfs (and now xfs) reflink and dedupe
ioctls at various file offsets and with matching and nonmatching
files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/803 | 92 +++++++++++++++++++++++++++
tests/generic/803.out | 8 ++
tests/generic/804 | 93 +++++++++++++++++++++++++++
tests/generic/804.out | 11 +++
tests/generic/805 | 170 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/805.out | 30 +++++++++
tests/generic/806 | 92 +++++++++++++++++++++++++++
tests/generic/806.out | 8 ++
tests/generic/807 | 92 +++++++++++++++++++++++++++
tests/generic/807.out | 12 +++
tests/generic/817 | 128 +++++++++++++++++++++++++++++++++++++
tests/generic/817.out | 16 +++++
tests/generic/818 | 128 +++++++++++++++++++++++++++++++++++++
tests/generic/818.out | 17 +++++
tests/generic/819 | 131 ++++++++++++++++++++++++++++++++++++++
tests/generic/819.out | 8 ++
tests/generic/group | 8 ++
17 files changed, 1044 insertions(+)
create mode 100755 tests/generic/803
create mode 100644 tests/generic/803.out
create mode 100755 tests/generic/804
create mode 100644 tests/generic/804.out
create mode 100755 tests/generic/805
create mode 100644 tests/generic/805.out
create mode 100755 tests/generic/806
create mode 100644 tests/generic/806.out
create mode 100755 tests/generic/807
create mode 100644 tests/generic/807.out
create mode 100755 tests/generic/817
create mode 100644 tests/generic/817.out
create mode 100755 tests/generic/818
create mode 100644 tests/generic/818.out
create mode 100755 tests/generic/819
create mode 100644 tests/generic/819.out
diff --git a/tests/generic/803 b/tests/generic/803
new file mode 100755
index 0000000..14c9e98
--- /dev/null
+++ b/tests/generic/803
@@ -0,0 +1,92 @@
+#! /bin/bash
+# FS QA Test No. 803
+#
+# Ensure that we can reflink parts of two identical files:
+# - Reflink identical parts of two identical files
+# - Check that we still have identical contents
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file2" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 8)) \
+ || echo "Files do not match"
+
+echo "Reflink the middle blocks together"
+free_before="$(stat -f -c '%a' "$TESTDIR")"
+_reflink_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) >> "$seqres.full"
+_test_remount
+free_after="$(stat -f -c '%a' "$TESTDIR")"
+echo "freesp changed by $free_before -> $free_after" >> "$seqres.full"
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 4)) \
+ || echo "Start sections do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) \
+ || echo "Middle sections do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 6)) "$TESTDIR/file2" \
+ $((BLKSZ * 6)) $((BLKSZ * 2)) \
+ || echo "End sections do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/803.out b/tests/generic/803.out
new file mode 100644
index 0000000..09099aa
--- /dev/null
+++ b/tests/generic/803.out
@@ -0,0 +1,8 @@
+QA output created by 803
+Create the original files
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-803/file1
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-803/file2
+Reflink the middle blocks together
+Compare sections
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-803/file1
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-803/file2
diff --git a/tests/generic/804 b/tests/generic/804
new file mode 100755
index 0000000..611ad51
--- /dev/null
+++ b/tests/generic/804
@@ -0,0 +1,93 @@
+#! /bin/bash
+# FS QA Test No. 804
+#
+# Ensuring that we can reflink non-matching parts of files:
+# - Reflink identical ranges of two different files
+# - Check that the non-linked ranges still do not match
+# - Check that we end up with identical contents in the linked ranges
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file2" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 8)) \
+ || echo "Files do not match (intentional)"
+
+echo "Reflink the middle blocks together"
+free_before="$(stat -f -c '%a' "$TESTDIR")"
+_reflink_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) >> "$seqres.full"
+_test_remount
+free_after="$(stat -f -c '%a' "$TESTDIR")"
+echo "freesp changed by $free_before -> $free_after" >> "$seqres.full"
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 4)) \
+ || echo "Start sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) \
+ || echo "Middle sections do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 6)) "$TESTDIR/file2" \
+ $((BLKSZ * 6)) $((BLKSZ * 2)) \
+ || echo "End sections do not match (intentional)"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/804.out b/tests/generic/804.out
new file mode 100644
index 0000000..ad40ca2
--- /dev/null
+++ b/tests/generic/804.out
@@ -0,0 +1,11 @@
+QA output created by 804
+Create the original files
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-804/file1
+5e3501f97fd2669babfcbd3e1972e833 TEST_DIR/test-804/file2
+Files do not match (intentional)
+Reflink the middle blocks together
+Compare sections
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-804/file1
+f7f9e44d37909868014e9151f5293ab0 TEST_DIR/test-804/file2
+Start sections do not match (intentional)
+End sections do not match (intentional)
diff --git a/tests/generic/805 b/tests/generic/805
new file mode 100755
index 0000000..41ef722
--- /dev/null
+++ b/tests/generic/805
@@ -0,0 +1,170 @@
+#! /bin/bash
+# FS QA Test No. 805
+#
+# Reflinking two sets of files together:
+# - Reflink identical parts of two identical files
+# - Reflink identical parts of two other identical files
+# - Reflink identical parts of all four files
+# - Check that we end up with identical contents
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 8)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ * 8)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x63 0 $((BLKSZ * 8)) "$TESTDIR/file3" >> "$seqres.full"
+_pwrite_byte 0x64 0 $((BLKSZ * 8)) "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 8)) \
+ || echo "Files 1-2 do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file3" 0 $((BLKSZ * 8)) \
+ || echo "Files 1-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file4" 0 $((BLKSZ * 8)) \
+ || echo "Files 1-4 do not match (intentional)"
+
+echo "Reflink the first four blocks together, 1-2 3-4"
+free_before="$(stat -f -c '%a' "$TESTDIR")"
+_reflink_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 4)) >> "$seqres.full"
+_reflink_range "$TESTDIR/file3" 0 "$TESTDIR/file4" 0 $((BLKSZ * 4)) >> "$seqres.full"
+_test_remount
+free_after="$(stat -f -c '%a' "$TESTDIR")"
+echo "freesp changed by $free_before -> $free_after" >> "$seqres.full"
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 4)) \
+ || echo "Sections of file 1-2 do not match"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file3" 0 $((BLKSZ * 4)) \
+ || echo "Sections of file 1-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file4" 0 $((BLKSZ * 4)) \
+ || echo "Sections of file 1-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 $((BLKSZ * 4)) \
+ || echo "Sections of file 2-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file4" 0 $((BLKSZ * 4)) \
+ || echo "Sections of file 2-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file3" 0 "$TESTDIR/file4" 0 $((BLKSZ * 4)) \
+ || echo "Sections of file 3-4 do not match"
+
+echo "Reflink the first two blocks together, 1-3 1-4"
+free_before="$(stat -f -c '%a' $TESTDIR)"
+_reflink_range "$TESTDIR/file1" 0 "$TESTDIR/file3" 0 $((BLKSZ * 2)) >> "$seqres.full"
+_reflink_range "$TESTDIR/file1" 0 "$TESTDIR/file4" 0 $((BLKSZ * 2)) >> "$seqres.full"
+_test_remount
+free_after="$(stat -f -c '%a' $TESTDIR)"
+echo "freesp changed by $free_before -> $free_after" >> "$seqres.full"
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 2)) \
+ || echo "Sections of files 1-2 do not match"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file3" 0 $((BLKSZ * 2)) \
+ || echo "Sections of files 1-3 do not match"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file4" 0 $((BLKSZ * 2)) \
+ || echo "Sections of files 1-4 do not match"
+
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 $((BLKSZ * 2)) \
+ || echo "Sections of files 2-3 do not match"
+
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file4" 0 $((BLKSZ * 2)) \
+ || echo "Sections of files 2-4 do not match"
+
+_compare_range "$TESTDIR/file3" 0 "$TESTDIR/file4" 0 $((BLKSZ * 2)) \
+ || echo "Sections of files 3-4 do not match"
+
+echo "Compare previously reflinked sections"
+_compare_range "$TESTDIR/file1" $((BLKSZ * 2)) "$TESTDIR/file2" \
+ $((BLKSZ * 2)) $((BLKSZ * 2)) \
+ || echo "Sections of file 1-2 do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 2)) "$TESTDIR/file3" \
+ $((BLKSZ * 2)) $((BLKSZ * 2)) \
+ || echo "Sections of file 1-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 2)) "$TESTDIR/file4" \
+ $((BLKSZ * 2)) $((BLKSZ * 2)) \
+ || echo "Sections of file 1-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 2)) "$TESTDIR/file3" \
+ $((BLKSZ * 2)) $((BLKSZ * 2)) \
+ || echo "Sections of file 2-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 2)) "$TESTDIR/file4" \
+ $((BLKSZ * 2)) $((BLKSZ * 2)) \
+ || echo "Sections of file 2-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file3" $((BLKSZ * 2)) "$TESTDIR/file4" \
+ $((BLKSZ * 2)) $((BLKSZ * 2)) \
+ || echo "Sections of file 3-4 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/805.out b/tests/generic/805.out
new file mode 100644
index 0000000..82f9658
--- /dev/null
+++ b/tests/generic/805.out
@@ -0,0 +1,30 @@
+QA output created by 805
+Create the original files
+30c2557e8302a5beb290c71520d87f42 TEST_DIR/test-805/file1
+efb787f7990e43c7dc30565d8cc344d4 TEST_DIR/test-805/file2
+c83f38d4622a78b74e3480634194b08f TEST_DIR/test-805/file3
+1c11fd3151d2229f5cf43903386aa432 TEST_DIR/test-805/file4
+Files 1-2 do not match (intentional)
+Files 1-3 do not match (intentional)
+Files 1-4 do not match (intentional)
+Reflink the first four blocks together, 1-2 3-4
+Compare sections
+30c2557e8302a5beb290c71520d87f42 TEST_DIR/test-805/file1
+63bdb182cdf03a8a19e83234d869d00a TEST_DIR/test-805/file2
+c83f38d4622a78b74e3480634194b08f TEST_DIR/test-805/file3
+dc2ae3db14e97fad93faf939170b085c TEST_DIR/test-805/file4
+Sections of file 1-3 do not match (intentional)
+Sections of file 1-4 do not match (intentional)
+Sections of file 2-3 do not match (intentional)
+Sections of file 2-4 do not match (intentional)
+Reflink the first two blocks together, 1-3 1-4
+Compare sections
+30c2557e8302a5beb290c71520d87f42 TEST_DIR/test-805/file1
+63bdb182cdf03a8a19e83234d869d00a TEST_DIR/test-805/file2
+89a444ff9d6af60ba487e9a0ca2161e2 TEST_DIR/test-805/file3
+0c263058794a54c5e197ece52386f5be TEST_DIR/test-805/file4
+Compare previously reflinked sections
+Sections of file 1-3 do not match (intentional)
+Sections of file 1-4 do not match (intentional)
+Sections of file 2-3 do not match (intentional)
+Sections of file 2-4 do not match (intentional)
diff --git a/tests/generic/806 b/tests/generic/806
new file mode 100755
index 0000000..ab973e3
--- /dev/null
+++ b/tests/generic/806
@@ -0,0 +1,92 @@
+#! /bin/bash
+# FS QA Test No. 806
+#
+# Ensure that we can dedupe parts of two files:
+# - Dedupe identical parts of two identical files
+# - Check that still have identical contents
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file2" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 8)) \
+ || echo "Files 1-2 do not match (intentional)"
+
+echo "Dedupe the middle blocks together"
+free_before="$(stat -f -c '%a' "$TESTDIR")"
+_dedupe_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) >> "$seqres.full"
+_test_remount
+free_after="$(stat -f -c '%a' "$TESTDIR")"
+echo "freesp changed by $free_before -> $free_after" >> "$seqres.full"
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 4)) \
+ || echo "Start sections do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) \
+ || echo "Middle sections do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 6)) "$TESTDIR/file2" \
+ $((BLKSZ * 6)) $((BLKSZ * 2)) \
+ || echo "End sections do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/806.out b/tests/generic/806.out
new file mode 100644
index 0000000..781b545
--- /dev/null
+++ b/tests/generic/806.out
@@ -0,0 +1,8 @@
+QA output created by 806
+Create the original files
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-806/file1
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-806/file2
+Dedupe the middle blocks together
+Compare sections
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-806/file1
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-806/file2
diff --git a/tests/generic/807 b/tests/generic/807
new file mode 100755
index 0000000..6f5168a
--- /dev/null
+++ b/tests/generic/807
@@ -0,0 +1,92 @@
+#! /bin/bash
+# FS QA Test No. 807
+#
+# Ensuring that we cannot dedupe non-matching parts of files:
+# - Fail to dedupe non-identical parts of two different files
+# - Check that nothing changes in either file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_dedupe
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 2)) $((BLKSZ * 6)) "$TESTDIR/file2" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 "$((BLKSZ * 8))" \
+ || echo "Files 1-2 do not match (intentional)"
+
+echo "(Fail to) dedupe the middle blocks together"
+free_before="$(stat -f -c '%a' "$TESTDIR")"
+_dedupe_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) >> "$seqres.full"
+_test_remount
+free_after="$(stat -f -c '%a' "$TESTDIR")"
+echo "freesp changed by $free_before -> $free_after" >> "$seqres.full"
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $((BLKSZ * 4)) \
+ || echo "Start sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 4)) "$TESTDIR/file2" \
+ $((BLKSZ * 4)) $((BLKSZ * 2)) \
+ || echo "Middle sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 6)) "$TESTDIR/file2" \
+ $((BLKSZ * 6)) $((BLKSZ * 2)) \
+ || echo "End sections do not match (intentional)"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/807.out b/tests/generic/807.out
new file mode 100644
index 0000000..424d039
--- /dev/null
+++ b/tests/generic/807.out
@@ -0,0 +1,12 @@
+QA output created by 807
+Create the original files
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-807/file1
+5e3501f97fd2669babfcbd3e1972e833 TEST_DIR/test-807/file2
+Files 1-2 do not match (intentional)
+(Fail to) dedupe the middle blocks together
+Compare sections
+35ac8d7917305c385c30f3d82c30a8f6 TEST_DIR/test-807/file1
+5e3501f97fd2669babfcbd3e1972e833 TEST_DIR/test-807/file2
+Start sections do not match (intentional)
+Middle sections do not match (intentional)
+End sections do not match (intentional)
diff --git a/tests/generic/817 b/tests/generic/817
new file mode 100755
index 0000000..667a79e
--- /dev/null
+++ b/tests/generic/817
@@ -0,0 +1,128 @@
+#! /bin/bash
+# FS QA Test No. 817
+#
+# Ensure that we can reflink the last block of a file whose size isn't
+# block-aligned.
+# - Create two 'a' files file whose size isn't block-aligned.
+# - Create two 'b' files file whose size isn't block-aligned.
+# - Reflink the last block of file1 to the last block in file2 and file3.
+# - Check that files 1-2 match, 3-4 don't match, and that nothing matches 3.
+# - Check that the ends of 1-3 match, and 1-3 do not match the end of file4.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ + 37)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ + 37)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ + 37)) "$TESTDIR/file3" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ + 37)) "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "Reflink the last blocks together, 1-2 1-3"
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ 37 >> "$seqres.full"
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file3" $BLKSZ 37 >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+echo "Compare files"
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should match"
+
+echo "Compare sections"
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ 37 \
+ || echo "End sections of files 1-2 do not match"
+
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file3" $BLKSZ 37 \
+ || echo "End sections of files 1-3 do not match"
+
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file4" $BLKSZ 37 \
+ || echo "End sections of files 1-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" $BLKSZ "$TESTDIR/file3" $BLKSZ 37 \
+ || echo "End sections of files 2-3 do not match"
+
+_compare_range "$TESTDIR/file2" $BLKSZ "$TESTDIR/file4" $BLKSZ 37 \
+ || echo "End sections of files 2-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file3" $BLKSZ "$TESTDIR/file4" $BLKSZ 37 \
+ || echo "End sections of files 3-4 do not match (intentional)"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/817.out b/tests/generic/817.out
new file mode 100644
index 0000000..dd6b1ee
--- /dev/null
+++ b/tests/generic/817.out
@@ -0,0 +1,16 @@
+QA output created by 817
+Create the original files
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-817/file1
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-817/file2
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-817/file3
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-817/file4
+Reflink the last blocks together, 1-2 1-3
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-817/file1
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-817/file2
+e236f2fe789f0aa34b50e981a2f0243a TEST_DIR/test-817/file3
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-817/file4
+Compare files
+Compare sections
+End sections of files 1-4 do not match (intentional)
+End sections of files 2-4 do not match (intentional)
+End sections of files 3-4 do not match (intentional)
diff --git a/tests/generic/818 b/tests/generic/818
new file mode 100755
index 0000000..fba097d
--- /dev/null
+++ b/tests/generic/818
@@ -0,0 +1,128 @@
+#! /bin/bash
+# FS QA Test No. 818
+#
+# Ensure that we can dedupe the last block of a file whose size isn't
+# block-aligned.
+# - Create two 'a' files file whose size isn't block-aligned.
+# - Create two 'b' files file whose size isn't block-aligned.
+# - Dedupe the last block of file1 to the last block in file2 and file3.
+# - Check that files 1-2 match, and that 3-4 match.
+# - Check that the ends of 1-2 and 3-4 match, and that 1-3 don't match.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_dedupe
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ + 37)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ + 37)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ + 37)) "$TESTDIR/file3" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ + 37)) "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "Dedupe the last blocks together"
+_dedupe_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ 37 >> "$seqres.full"
+_dedupe_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file3" $BLKSZ 37 >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+echo "Compare files"
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "Compare sections"
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ 37 \
+ || echo "End sections of files 1-2 do not match"
+
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file3" $BLKSZ 37 \
+ || echo "End sections of files 1-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file4" $BLKSZ 37 \
+ || echo "End sections of files 1-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" $BLKSZ "$TESTDIR/file3" $BLKSZ 37 \
+ || echo "End sections of files 2-3 do not match (intentional)"
+
+_compare_range "$TESTDIR/file2" $BLKSZ "$TESTDIR/file4" $BLKSZ 37 \
+ || echo "End sections of files 2-4 do not match (intentional)"
+
+_compare_range "$TESTDIR/file3" $BLKSZ "$TESTDIR/file4" $BLKSZ 37 \
+ || echo "End sections of files 3-4 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/818.out b/tests/generic/818.out
new file mode 100644
index 0000000..f7e30bf
--- /dev/null
+++ b/tests/generic/818.out
@@ -0,0 +1,17 @@
+QA output created by 818
+Create the original files
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-818/file1
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-818/file2
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-818/file3
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-818/file4
+Dedupe the last blocks together
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-818/file1
+c4fd505be25a0c91bcca9f502b9a8156 TEST_DIR/test-818/file2
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-818/file3
+07ac67bf7f271195442509e79cde4cee TEST_DIR/test-818/file4
+Compare files
+Compare sections
+End sections of files 1-3 do not match (intentional)
+End sections of files 1-4 do not match (intentional)
+End sections of files 2-3 do not match (intentional)
+End sections of files 2-4 do not match (intentional)
diff --git a/tests/generic/819 b/tests/generic/819
new file mode 100755
index 0000000..918868a
--- /dev/null
+++ b/tests/generic/819
@@ -0,0 +1,131 @@
+#! /bin/bash
+# FS QA Test No. 819
+#
+# Ensure that we can reflink and dedupe blocks within the same file...
+# - Create a file with three distinct blocks ABB
+# - Reflink block zero to the multiple-of-three blocks
+# - Reflink block one to the multiple-of-five blocks
+# - Dedupe block two to the multiple-of-seven blocks
+# - Check that we successfully avoid deduping with holes, unwritten
+# extents, and non-matches; but actually dedupe real matches.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_test_dedupe
+_require_xfs_io_command "falloc"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $((BLKSZ * 2)) "$TESTDIR/file1" >> "$seqres.full"
+
+NR_BLKS=1024
+
+echo "fallocate half the file"
+"$XFS_IO_PROG" -f -c "falloc $((NR_BLKS * BLKSZ / 2)) $((NR_BLKS * BLKSZ / 2))" "$TESTDIR/file1" >> "$seqres.full"
+
+echo "Reflink block zero to the threes"
+seq 1 $((NR_BLKS / 3)) | while read nr; do
+ _reflink_range "$TESTDIR/file1" 0 "$TESTDIR/file1" $((nr * 3 * BLKSZ)) \
+ $BLKSZ >> "$seqres.full"
+done
+
+echo "Reflink block one to the fives"
+seq 1 $((NR_BLKS / 5)) | while read nr; do
+ _reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file1" \
+ $((nr * 5 * BLKSZ)) $BLKSZ >> "$seqres.full"
+done
+
+echo "Dedupe block two to the sevens"
+seq 1 $((NR_BLKS / 7)) | while read nr; do
+ _dedupe_range "$TESTDIR/file1" $((BLKSZ * 2)) "$TESTDIR/file1" \
+ $((nr * 7 * BLKSZ)) $BLKSZ >> "$seqres.full"
+done
+
+_test_remount
+
+echo "Check block mappings"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+
+crcZ=$(_md5_range_checksum /dev/zero 0 $BLKSZ)
+crc0=$(_md5_range_checksum "$TESTDIR/file1" 0 $BLKSZ)
+crc1=$(_md5_range_checksum "$TESTDIR/file1" $BLKSZ $BLKSZ)
+crc2=$(_md5_range_checksum "$TESTDIR/file1" $((BLKSZ * 2)) $BLKSZ)
+
+check_block() {
+ lblk="$1"
+ rem7=$((lblk % 7))
+ rem5=$((lblk % 5))
+ rem3=$((lblk % 3))
+
+ crc=$(_md5_range_checksum "$TESTDIR/file1" $((lblk * BLKSZ)) $BLKSZ)
+
+ if [ $rem7 -eq 0 ]; then
+ if [ $rem5 -eq 0 ]; then
+ test $crc2 = $crc || echo "lblk $lblk doesn't match block 2"
+ elif [ $rem3 -eq 0 ]; then
+ test $crc0 = $crc || echo "lblk $lblk doesn't match block 0"
+ elif [ $lblk -lt $((NR_BLKS / 2)) ]; then
+ test $crcZ = $crc || echo "lblk $lblk isn't zeroed"
+ fi
+ elif [ $rem5 -eq 0 ]; then
+ test $crc1 = $crc || echo "lblk $lblk doesn't match block 1"
+ elif [ $rem3 -eq 0 ]; then
+ test $crc0 = $crc || echo "lblk $lblk doesn't match block 0"
+ elif [ $lblk -lt $((NR_BLKS / 2)) ]; then
+ test $crcZ = $crc || echo "lblk $lblk isn't zeroed"
+ fi
+}
+
+seq 3 $((NR_BLKS - 1)) | while read lblk; do
+ err="$(check_block $lblk)"
+ test -n "$err" && echo "$lblk: $err"
+done
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/819.out b/tests/generic/819.out
new file mode 100644
index 0000000..203275d
--- /dev/null
+++ b/tests/generic/819.out
@@ -0,0 +1,8 @@
+QA output created by 819
+Create the original file blocks
+fallocate half the file
+Reflink block zero to the threes
+Reflink block one to the fives
+Dedupe block two to the sevens
+Check block mappings
+2ea37912bdbd71b9ed4734d3141cbe9c TEST_DIR/test-819/file1
diff --git a/tests/generic/group b/tests/generic/group
index d9421c5..7f25037 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -211,3 +211,11 @@
800 auto quick clone
801 auto quick clone
802 auto quick clone
+803 auto quick clone
+804 auto quick clone
+805 auto quick clone
+806 auto quick clone
+807 auto quick clone
+817 auto quick clone
+818 auto quick clone
+819 auto quick clone
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 04/11] reflink: test CoW behaviors of reflinked files
2015-11-11 19:26 ` Darrick J. Wong
@ 2015-11-11 19:26 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:26 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Ensure that CoW happens correctly with buffered, directio, and mmap writes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/808 | 152 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/808.out | 19 ++++++
tests/generic/809 | 151 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/809.out | 19 ++++++
tests/generic/810 | 152 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/810.out | 19 ++++++
tests/generic/837 | 91 +++++++++++++++++++++++++++++
tests/generic/837.out | 8 +++
tests/generic/838 | 91 +++++++++++++++++++++++++++++
tests/generic/838.out | 8 +++
tests/generic/group | 5 ++
11 files changed, 715 insertions(+)
create mode 100755 tests/generic/808
create mode 100644 tests/generic/808.out
create mode 100755 tests/generic/809
create mode 100644 tests/generic/809.out
create mode 100755 tests/generic/810
create mode 100644 tests/generic/810.out
create mode 100755 tests/generic/837
create mode 100644 tests/generic/837.out
create mode 100755 tests/generic/838
create mode 100644 tests/generic/838.out
diff --git a/tests/generic/808 b/tests/generic/808
new file mode 100755
index 0000000..3a3ec58
--- /dev/null
+++ b/tests/generic/808
@@ -0,0 +1,152 @@
+#! /bin/bash
+# FS QA Test No. 808
+#
+# Ensuring that copy on write through the page cache works:
+# - Reflink two files together
+# - Write to the beginning, middle, and end
+# - Check that the files are now different where we say they're different.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 do not match"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 do not match"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 do not match"
+
+echo "pagecache CoW the second file"
+_pwrite_byte 0x62 0 17 "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 0 17 "$TESTDIR/file3" >> "$seqres.full"
+
+_pwrite_byte 0x62 $((BLKSZ * 16 - 34)) 17 "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 16 - 34)) 17 "$TESTDIR/file3" >> "$seqres.full"
+
+_pwrite_byte 0x62 $((BLKSZ * 48 - 8)) 17 "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 48 - 8)) 17 "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 do not match (intentional)"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 do not match (intentional)"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 do not match"
+
+echo "Compare the CoW'd section to the before file"
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 17 \
+ || echo "Start sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16 - 34)) \
+ "$TESTDIR/file2" $((BLKSZ * 16 - 34)) 17 \
+ || echo "Middle sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 48 - 8)) \
+ "$TESTDIR/file2" $((BLKSZ * 48 - 8)) 17 \
+ || echo "End sections do not match (intentional)"
+
+echo "Compare the CoW'd section to the after file"
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 17 \
+ || echo "Start sections do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16 - 34)) \
+ "$TESTDIR/file3" $((BLKSZ * 16 - 34)) 17 \
+ || echo "Middle sections do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 48 - 8)) \
+ "$TESTDIR/file3" $((BLKSZ * 48 - 8)) 17 \
+ || echo "End sections do not match"
+
+echo "Compare the not CoW'd sections"
+_compare_range "$TESTDIR/file1" 18 "$TESTDIR/file2" 18 17 \
+ || echo "Start sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" 18 "$TESTDIR/file3" 18 17 \
+ || echo "Start sections of 2-3 do not match"
+
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16 - 17)) \
+ "$TESTDIR/file2" $((BLKSZ * 16 - 17)) 82 \
+ || echo "Middle sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16 - 17)) \
+ "$TESTDIR/file3" $((BLKSZ * 16 - 17)) 82 \
+ || echo "Middle sections of 2-3 do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 48 - 108)) \
+ "$TESTDIR/file2" $((BLKSZ * 48 - 108)) 100 \
+ || echo "End sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 48 - 108)) \
+ "$TESTDIR/file3" $((BLKSZ * 48 - 108)) 100 \
+ || echo "End sections of 2-3 do not match"
+
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 14)) \
+ "$TESTDIR/file2" $((BLKSZ * 14)) $BLKSZ \
+ || echo "Untouched sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 14)) \
+ "$TESTDIR/file3" $((BLKSZ * 14)) $BLKSZ \
+ || echo "Untouched sections of 2-3 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/808.out b/tests/generic/808.out
new file mode 100644
index 0000000..1e82e2d
--- /dev/null
+++ b/tests/generic/808.out
@@ -0,0 +1,19 @@
+QA output created by 808
+Create the original files
+Compare files
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-808/file1
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-808/file2
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-808/file3
+pagecache CoW the second file
+Compare files
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-808/file1
+4a879c2f322121f6f4b8ebede1909a7c TEST_DIR/test-808/file2
+4a879c2f322121f6f4b8ebede1909a7c TEST_DIR/test-808/file3
+Files 1-2 do not match (intentional)
+Files 1-3 do not match (intentional)
+Compare the CoW'd section to the before file
+Start sections do not match (intentional)
+Middle sections do not match (intentional)
+End sections do not match (intentional)
+Compare the CoW'd section to the after file
+Compare the not CoW'd sections
diff --git a/tests/generic/809 b/tests/generic/809
new file mode 100755
index 0000000..99e88f6
--- /dev/null
+++ b/tests/generic/809
@@ -0,0 +1,151 @@
+#! /bin/bash
+# FS QA Test No. 809
+#
+# Ensuring that copy on write in direct-io mode works:
+# - Reflink two files together
+# - Write to the beginning, middle, and end in direct-io mode
+# - Check that the files are now different where we say they're different.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 should match"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 should match"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 should match"
+
+echo "directio CoW the second file"
+_pwrite_byte 0x62 0 $BLKSZ "$TESTDIR/file2" -d >> "$seqres.full"
+_pwrite_byte 0x62 0 $BLKSZ "$TESTDIR/file3" -d >> "$seqres.full"
+
+_pwrite_byte 0x62 $((BLKSZ * 16 - 512)) 512 "$TESTDIR/file2" -d >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 16 - 512)) 512 "$TESTDIR/file3" -d >> "$seqres.full"
+
+_pwrite_byte 0x62 $((BLKSZ * 48)) $BLKSZ "$TESTDIR/file2" -d >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 48)) $BLKSZ "$TESTDIR/file3" -d >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 should not match (intentional)"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 should not match (intentional)"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 should match"
+
+echo "Compare the CoW'd section to the before file"
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $BLKSZ \
+ || echo "Start sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16 - 512)) \
+ "$TESTDIR/file2" $((BLKSZ * 16 - 512)) 512 \
+ || echo "Middle sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 48 - 512)) \
+ "$TESTDIR/file2" $((BLKSZ * 48 - 512)) $BLKSZ \
+ || echo "End sections do not match (intentional)"
+
+echo "Compare the CoW'd section to the after file"
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 $BLKSZ \
+ || echo "Start sections do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16 - 512)) \
+ "$TESTDIR/file3" $((BLKSZ * 16 - 512)) 512 \
+ || echo "Middle sections do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 48 - 512)) \
+ "$TESTDIR/file3" $((BLKSZ * 48 - 512)) $BLKSZ \
+ || echo "End sections do not match"
+
+echo "Compare the not CoW'd sections"
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ 512 \
+ || echo "Start sections of 1-2 do not match"
+_compare_range "$TESTDIR/file2" $BLKSZ "$TESTDIR/file3" $BLKSZ 512 \
+ || echo "Start sections of 2-3 do not match"
+
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16 - 1024)) \
+ "$TESTDIR/file2" $((BLKSZ * 16 - 1024)) 512 \
+ || echo "Middle sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16 - 1024)) \
+ "$TESTDIR/file3" $((BLKSZ * 16 - 1024)) 512 \
+ || echo "Middle sections of 2-3 do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 48 - 1024)) \
+ "$TESTDIR/file2" $((BLKSZ * 48 - 1024)) 512 \
+ || echo "End sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 48 - 1024)) \
+ "$TESTDIR/file3" $((BLKSZ * 48 - 1024)) 512 \
+ || echo "End sections of 2-3 do not match"
+
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16)) \
+ "$TESTDIR/file2" $((BLKSZ * 16)) 512 \
+ || echo "Untouched sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16)) \
+ "$TESTDIR/file3" $((BLKSZ * 16)) 512 \
+ || echo "Untouched sections of 2-3 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/809.out b/tests/generic/809.out
new file mode 100644
index 0000000..ad63e4e
--- /dev/null
+++ b/tests/generic/809.out
@@ -0,0 +1,19 @@
+QA output created by 809
+Create the original files
+Compare files
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-809/file1
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-809/file2
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-809/file3
+directio CoW the second file
+Compare files
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-809/file1
+ff5626fb6c71b242d6b1a43de25c9a85 TEST_DIR/test-809/file2
+ff5626fb6c71b242d6b1a43de25c9a85 TEST_DIR/test-809/file3
+Files 1-2 should not match (intentional)
+Files 1-3 should not match (intentional)
+Compare the CoW'd section to the before file
+Start sections do not match (intentional)
+Middle sections do not match (intentional)
+End sections do not match (intentional)
+Compare the CoW'd section to the after file
+Compare the not CoW'd sections
diff --git a/tests/generic/810 b/tests/generic/810
new file mode 100755
index 0000000..3b635f8
--- /dev/null
+++ b/tests/generic/810
@@ -0,0 +1,152 @@
+#! /bin/bash
+# FS QA Test No. 810
+#
+# Ensuring that mmap copy on write through the page cache works:
+# - Reflink two files together
+# - Write to the beginning, middle, and end
+# - Check that the files are now different where we say they're different.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 do not match"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 do not match"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 do not match"
+
+echo "mmap CoW the second file"
+_mwrite_byte 0x62 0 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file2" >> "$seqres.full"
+_mwrite_byte 0x62 0 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+
+_mwrite_byte 0x62 $((BLKSZ * 16 - 34)) 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file2" >> "$seqres.full"
+_mwrite_byte 0x62 $((BLKSZ * 16 - 34)) 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+
+_mwrite_byte 0x62 $((BLKSZ * 48 - 20)) 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file2" >> "$seqres.full"
+_mwrite_byte 0x62 $((BLKSZ * 48 - 20)) 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 do not match (intentional)"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 do not match (intentional)"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 do not match"
+
+echo "Compare the CoW'd section to the before file"
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 17 \
+ || echo "Start sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16 - 34)) \
+ "$TESTDIR/file2" $((BLKSZ * 16 - 34)) 17 \
+ || echo "Middle sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 48 - 20)) \
+ "$TESTDIR/file2" $((BLKSZ * 48 - 20)) 17 \
+ || echo "End sections do not match (intentional)"
+
+echo "Compare the CoW'd section to the after file"
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 17 \
+ || echo "Start sections do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16 - 34)) \
+ "$TESTDIR/file3" $((BLKSZ * 16 - 34)) 17 \
+ || echo "Middle sections do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 48 - 20)) \
+ "$TESTDIR/file3" $((BLKSZ * 48 - 20)) 17 \
+ || echo "End sections do not match"
+
+echo "Compare the not CoW'd sections"
+_compare_range "$TESTDIR/file1" 18 "$TESTDIR/file2" 18 17 \
+ || echo "Start sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" 18 "$TESTDIR/file3" 18 17 \
+ || echo "Start sections of 2-3 do not match"
+
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16 - 17)) \
+ "$TESTDIR/file2" $((BLKSZ * 16 - 17)) 82 \
+ || echo "Middle sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16 - 17)) \
+ "$TESTDIR/file3" $((BLKSZ * 16 - 17)) 82 \
+ || echo "Middle sections of 2-3 do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 48 - 120)) \
+ "$TESTDIR/file2" $((BLKSZ * 48 - 120)) 100 \
+ || echo "End sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 48 - 120)) \
+ "$TESTDIR/file3" $((BLKSZ * 48 - 120)) 100 \
+ || echo "End sections of 2-3 do not match"
+
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 14)) \
+ "$TESTDIR/file2" $((BLKSZ * 14)) $BLKSZ \
+ || echo "Untouched sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 14)) \
+ "$TESTDIR/file3" $((BLKSZ * 14)) $BLKSZ \
+ || echo "Untouched sections of 2-3 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/810.out b/tests/generic/810.out
new file mode 100644
index 0000000..8cc94ab
--- /dev/null
+++ b/tests/generic/810.out
@@ -0,0 +1,19 @@
+QA output created by 810
+Create the original files
+Compare files
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-810/file1
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-810/file2
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-810/file3
+mmap CoW the second file
+Compare files
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-810/file1
+795ecfd281dbda4916431376228e4187 TEST_DIR/test-810/file2
+795ecfd281dbda4916431376228e4187 TEST_DIR/test-810/file3
+Files 1-2 do not match (intentional)
+Files 1-3 do not match (intentional)
+Compare the CoW'd section to the before file
+Start sections do not match (intentional)
+Middle sections do not match (intentional)
+End sections do not match (intentional)
+Compare the CoW'd section to the after file
+Compare the not CoW'd sections
diff --git a/tests/generic/837 b/tests/generic/837
new file mode 100755
index 0000000..de5f233
--- /dev/null
+++ b/tests/generic/837
@@ -0,0 +1,91 @@
+#! /bin/bash
+# FS QA Test No. 837
+#
+# Ensure that reflinking a file N times and CoWing the copies leaves the
+# original intact.
+# - Create a file and record its hash
+# - Create some reflink copies
+# - Rewrite all the reflink copies
+# - Compare the contents of the original file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ=65536
+NR=9
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+csum="$(_md5_checksum "$TESTDIR/file1")"
+
+echo "Create the reflink copies"
+seq 2 $NR | while read i; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+
+echo "Rewrite the copies"
+seq 2 $NR | while read i; do
+ _pwrite_byte 0x62 0 $((BLKSZ * 256)) "$TESTDIR/file$i" >> "$seqres.full"
+done
+_test_remount
+
+echo "Examine original file"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+mod_csum="$(_md5_checksum "$TESTDIR/file2")"
+new_csum="$(_md5_checksum "$TESTDIR/file1")"
+test "${csum}" != "${mod_csum}" || echo "checksums do not match"
+test "${csum}" = "${new_csum}" || echo "checksums do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/837.out b/tests/generic/837.out
new file mode 100644
index 0000000..3f9c2e5
--- /dev/null
+++ b/tests/generic/837.out
@@ -0,0 +1,8 @@
+QA output created by 837
+Create the original file blocks
+f4820540fc0ac02750739896fe028d56 TEST_DIR/test-837/file1
+Create the reflink copies
+Rewrite the copies
+Examine original file
+f4820540fc0ac02750739896fe028d56 TEST_DIR/test-837/file1
+eb34153e9ed1e774db28cbbe4090a449 TEST_DIR/test-837/file2
diff --git a/tests/generic/838 b/tests/generic/838
new file mode 100755
index 0000000..1130a2c
--- /dev/null
+++ b/tests/generic/838
@@ -0,0 +1,91 @@
+#! /bin/bash
+# FS QA Test No. 838
+#
+# Ensure that reflinking a file N times and DIO CoWing the copies leaves the
+# original intact.
+# - Create a file and record its hash
+# - Create some reflink copies
+# - Rewrite all the reflink copies w/ directio
+# - Compare the contents of the original file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ=65536
+NR=9
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+csum="$(_md5_checksum "$TESTDIR/file1")"
+
+echo "Create the reflink copies"
+seq 2 $NR | while read i; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+
+echo "Rewrite the copies"
+seq 2 $NR | while read i; do
+ _pwrite_byte 0x62 0 $((BLKSZ * 256)) "$TESTDIR/file$i" -d >> "$seqres.full"
+done
+_test_remount
+
+echo "Examine original file"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+mod_csum="$(_md5_checksum "$TESTDIR/file2")"
+new_csum="$(_md5_checksum "$TESTDIR/file1")"
+test "${csum}" != "${mod_csum}" || echo "checksums do not match"
+test "${csum}" = "${new_csum}" || echo "checksums do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/838.out b/tests/generic/838.out
new file mode 100644
index 0000000..cc44815
--- /dev/null
+++ b/tests/generic/838.out
@@ -0,0 +1,8 @@
+QA output created by 838
+Create the original file blocks
+f4820540fc0ac02750739896fe028d56 TEST_DIR/test-838/file1
+Create the reflink copies
+Rewrite the copies
+Examine original file
+f4820540fc0ac02750739896fe028d56 TEST_DIR/test-838/file1
+eb34153e9ed1e774db28cbbe4090a449 TEST_DIR/test-838/file2
diff --git a/tests/generic/group b/tests/generic/group
index 7f25037..a72d416 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -216,6 +216,11 @@
805 auto quick clone
806 auto quick clone
807 auto quick clone
+808 auto quick clone
+809 auto quick clone
+810 auto quick clone
817 auto quick clone
818 auto quick clone
819 auto quick clone
+837 auto quick clone
+838 auto quick clone
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH 04/11] reflink: test CoW behaviors of reflinked files
@ 2015-11-11 19:26 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:26 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Ensure that CoW happens correctly with buffered, directio, and mmap writes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/808 | 152 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/808.out | 19 ++++++
tests/generic/809 | 151 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/809.out | 19 ++++++
tests/generic/810 | 152 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/810.out | 19 ++++++
tests/generic/837 | 91 +++++++++++++++++++++++++++++
tests/generic/837.out | 8 +++
tests/generic/838 | 91 +++++++++++++++++++++++++++++
tests/generic/838.out | 8 +++
tests/generic/group | 5 ++
11 files changed, 715 insertions(+)
create mode 100755 tests/generic/808
create mode 100644 tests/generic/808.out
create mode 100755 tests/generic/809
create mode 100644 tests/generic/809.out
create mode 100755 tests/generic/810
create mode 100644 tests/generic/810.out
create mode 100755 tests/generic/837
create mode 100644 tests/generic/837.out
create mode 100755 tests/generic/838
create mode 100644 tests/generic/838.out
diff --git a/tests/generic/808 b/tests/generic/808
new file mode 100755
index 0000000..3a3ec58
--- /dev/null
+++ b/tests/generic/808
@@ -0,0 +1,152 @@
+#! /bin/bash
+# FS QA Test No. 808
+#
+# Ensuring that copy on write through the page cache works:
+# - Reflink two files together
+# - Write to the beginning, middle, and end
+# - Check that the files are now different where we say they're different.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 do not match"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 do not match"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 do not match"
+
+echo "pagecache CoW the second file"
+_pwrite_byte 0x62 0 17 "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 0 17 "$TESTDIR/file3" >> "$seqres.full"
+
+_pwrite_byte 0x62 $((BLKSZ * 16 - 34)) 17 "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 16 - 34)) 17 "$TESTDIR/file3" >> "$seqres.full"
+
+_pwrite_byte 0x62 $((BLKSZ * 48 - 8)) 17 "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 48 - 8)) 17 "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 do not match (intentional)"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 do not match (intentional)"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 do not match"
+
+echo "Compare the CoW'd section to the before file"
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 17 \
+ || echo "Start sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16 - 34)) \
+ "$TESTDIR/file2" $((BLKSZ * 16 - 34)) 17 \
+ || echo "Middle sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 48 - 8)) \
+ "$TESTDIR/file2" $((BLKSZ * 48 - 8)) 17 \
+ || echo "End sections do not match (intentional)"
+
+echo "Compare the CoW'd section to the after file"
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 17 \
+ || echo "Start sections do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16 - 34)) \
+ "$TESTDIR/file3" $((BLKSZ * 16 - 34)) 17 \
+ || echo "Middle sections do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 48 - 8)) \
+ "$TESTDIR/file3" $((BLKSZ * 48 - 8)) 17 \
+ || echo "End sections do not match"
+
+echo "Compare the not CoW'd sections"
+_compare_range "$TESTDIR/file1" 18 "$TESTDIR/file2" 18 17 \
+ || echo "Start sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" 18 "$TESTDIR/file3" 18 17 \
+ || echo "Start sections of 2-3 do not match"
+
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16 - 17)) \
+ "$TESTDIR/file2" $((BLKSZ * 16 - 17)) 82 \
+ || echo "Middle sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16 - 17)) \
+ "$TESTDIR/file3" $((BLKSZ * 16 - 17)) 82 \
+ || echo "Middle sections of 2-3 do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 48 - 108)) \
+ "$TESTDIR/file2" $((BLKSZ * 48 - 108)) 100 \
+ || echo "End sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 48 - 108)) \
+ "$TESTDIR/file3" $((BLKSZ * 48 - 108)) 100 \
+ || echo "End sections of 2-3 do not match"
+
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 14)) \
+ "$TESTDIR/file2" $((BLKSZ * 14)) $BLKSZ \
+ || echo "Untouched sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 14)) \
+ "$TESTDIR/file3" $((BLKSZ * 14)) $BLKSZ \
+ || echo "Untouched sections of 2-3 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/808.out b/tests/generic/808.out
new file mode 100644
index 0000000..1e82e2d
--- /dev/null
+++ b/tests/generic/808.out
@@ -0,0 +1,19 @@
+QA output created by 808
+Create the original files
+Compare files
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-808/file1
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-808/file2
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-808/file3
+pagecache CoW the second file
+Compare files
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-808/file1
+4a879c2f322121f6f4b8ebede1909a7c TEST_DIR/test-808/file2
+4a879c2f322121f6f4b8ebede1909a7c TEST_DIR/test-808/file3
+Files 1-2 do not match (intentional)
+Files 1-3 do not match (intentional)
+Compare the CoW'd section to the before file
+Start sections do not match (intentional)
+Middle sections do not match (intentional)
+End sections do not match (intentional)
+Compare the CoW'd section to the after file
+Compare the not CoW'd sections
diff --git a/tests/generic/809 b/tests/generic/809
new file mode 100755
index 0000000..99e88f6
--- /dev/null
+++ b/tests/generic/809
@@ -0,0 +1,151 @@
+#! /bin/bash
+# FS QA Test No. 809
+#
+# Ensuring that copy on write in direct-io mode works:
+# - Reflink two files together
+# - Write to the beginning, middle, and end in direct-io mode
+# - Check that the files are now different where we say they're different.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 should match"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 should match"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 should match"
+
+echo "directio CoW the second file"
+_pwrite_byte 0x62 0 $BLKSZ "$TESTDIR/file2" -d >> "$seqres.full"
+_pwrite_byte 0x62 0 $BLKSZ "$TESTDIR/file3" -d >> "$seqres.full"
+
+_pwrite_byte 0x62 $((BLKSZ * 16 - 512)) 512 "$TESTDIR/file2" -d >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 16 - 512)) 512 "$TESTDIR/file3" -d >> "$seqres.full"
+
+_pwrite_byte 0x62 $((BLKSZ * 48)) $BLKSZ "$TESTDIR/file2" -d >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 48)) $BLKSZ "$TESTDIR/file3" -d >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 should not match (intentional)"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 should not match (intentional)"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 should match"
+
+echo "Compare the CoW'd section to the before file"
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 $BLKSZ \
+ || echo "Start sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16 - 512)) \
+ "$TESTDIR/file2" $((BLKSZ * 16 - 512)) 512 \
+ || echo "Middle sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 48 - 512)) \
+ "$TESTDIR/file2" $((BLKSZ * 48 - 512)) $BLKSZ \
+ || echo "End sections do not match (intentional)"
+
+echo "Compare the CoW'd section to the after file"
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 $BLKSZ \
+ || echo "Start sections do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16 - 512)) \
+ "$TESTDIR/file3" $((BLKSZ * 16 - 512)) 512 \
+ || echo "Middle sections do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 48 - 512)) \
+ "$TESTDIR/file3" $((BLKSZ * 48 - 512)) $BLKSZ \
+ || echo "End sections do not match"
+
+echo "Compare the not CoW'd sections"
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ 512 \
+ || echo "Start sections of 1-2 do not match"
+_compare_range "$TESTDIR/file2" $BLKSZ "$TESTDIR/file3" $BLKSZ 512 \
+ || echo "Start sections of 2-3 do not match"
+
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16 - 1024)) \
+ "$TESTDIR/file2" $((BLKSZ * 16 - 1024)) 512 \
+ || echo "Middle sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16 - 1024)) \
+ "$TESTDIR/file3" $((BLKSZ * 16 - 1024)) 512 \
+ || echo "Middle sections of 2-3 do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 48 - 1024)) \
+ "$TESTDIR/file2" $((BLKSZ * 48 - 1024)) 512 \
+ || echo "End sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 48 - 1024)) \
+ "$TESTDIR/file3" $((BLKSZ * 48 - 1024)) 512 \
+ || echo "End sections of 2-3 do not match"
+
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16)) \
+ "$TESTDIR/file2" $((BLKSZ * 16)) 512 \
+ || echo "Untouched sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16)) \
+ "$TESTDIR/file3" $((BLKSZ * 16)) 512 \
+ || echo "Untouched sections of 2-3 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/809.out b/tests/generic/809.out
new file mode 100644
index 0000000..ad63e4e
--- /dev/null
+++ b/tests/generic/809.out
@@ -0,0 +1,19 @@
+QA output created by 809
+Create the original files
+Compare files
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-809/file1
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-809/file2
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-809/file3
+directio CoW the second file
+Compare files
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-809/file1
+ff5626fb6c71b242d6b1a43de25c9a85 TEST_DIR/test-809/file2
+ff5626fb6c71b242d6b1a43de25c9a85 TEST_DIR/test-809/file3
+Files 1-2 should not match (intentional)
+Files 1-3 should not match (intentional)
+Compare the CoW'd section to the before file
+Start sections do not match (intentional)
+Middle sections do not match (intentional)
+End sections do not match (intentional)
+Compare the CoW'd section to the after file
+Compare the not CoW'd sections
diff --git a/tests/generic/810 b/tests/generic/810
new file mode 100755
index 0000000..3b635f8
--- /dev/null
+++ b/tests/generic/810
@@ -0,0 +1,152 @@
+#! /bin/bash
+# FS QA Test No. 810
+#
+# Ensuring that mmap copy on write through the page cache works:
+# - Reflink two files together
+# - Write to the beginning, middle, and end
+# - Check that the files are now different where we say they're different.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 do not match"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 do not match"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 do not match"
+
+echo "mmap CoW the second file"
+_mwrite_byte 0x62 0 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file2" >> "$seqres.full"
+_mwrite_byte 0x62 0 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+
+_mwrite_byte 0x62 $((BLKSZ * 16 - 34)) 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file2" >> "$seqres.full"
+_mwrite_byte 0x62 $((BLKSZ * 16 - 34)) 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+
+_mwrite_byte 0x62 $((BLKSZ * 48 - 20)) 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file2" >> "$seqres.full"
+_mwrite_byte 0x62 $((BLKSZ * 48 - 20)) 17 $((BLKSZ * 48 - 3)) "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+
+cmp -s "$TESTDIR/file1" "$TESTDIR/file2" || echo "Files 1-2 do not match (intentional)"
+cmp -s "$TESTDIR/file1" "$TESTDIR/file3" || echo "Files 1-3 do not match (intentional)"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file3" || echo "Files 2-3 do not match"
+
+echo "Compare the CoW'd section to the before file"
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file2" 0 17 \
+ || echo "Start sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16 - 34)) \
+ "$TESTDIR/file2" $((BLKSZ * 16 - 34)) 17 \
+ || echo "Middle sections do not match (intentional)"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 48 - 20)) \
+ "$TESTDIR/file2" $((BLKSZ * 48 - 20)) 17 \
+ || echo "End sections do not match (intentional)"
+
+echo "Compare the CoW'd section to the after file"
+_compare_range "$TESTDIR/file2" 0 "$TESTDIR/file3" 0 17 \
+ || echo "Start sections do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16 - 34)) \
+ "$TESTDIR/file3" $((BLKSZ * 16 - 34)) 17 \
+ || echo "Middle sections do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 48 - 20)) \
+ "$TESTDIR/file3" $((BLKSZ * 48 - 20)) 17 \
+ || echo "End sections do not match"
+
+echo "Compare the not CoW'd sections"
+_compare_range "$TESTDIR/file1" 18 "$TESTDIR/file2" 18 17 \
+ || echo "Start sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" 18 "$TESTDIR/file3" 18 17 \
+ || echo "Start sections of 2-3 do not match"
+
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 16 - 17)) \
+ "$TESTDIR/file2" $((BLKSZ * 16 - 17)) 82 \
+ || echo "Middle sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 16 - 17)) \
+ "$TESTDIR/file3" $((BLKSZ * 16 - 17)) 82 \
+ || echo "Middle sections of 2-3 do not match"
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 48 - 120)) \
+ "$TESTDIR/file2" $((BLKSZ * 48 - 120)) 100 \
+ || echo "End sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 48 - 120)) \
+ "$TESTDIR/file3" $((BLKSZ * 48 - 120)) 100 \
+ || echo "End sections of 2-3 do not match"
+
+
+_compare_range "$TESTDIR/file1" $((BLKSZ * 14)) \
+ "$TESTDIR/file2" $((BLKSZ * 14)) $BLKSZ \
+ || echo "Untouched sections of 1-2 do not match"
+
+_compare_range "$TESTDIR/file2" $((BLKSZ * 14)) \
+ "$TESTDIR/file3" $((BLKSZ * 14)) $BLKSZ \
+ || echo "Untouched sections of 2-3 do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/810.out b/tests/generic/810.out
new file mode 100644
index 0000000..8cc94ab
--- /dev/null
+++ b/tests/generic/810.out
@@ -0,0 +1,19 @@
+QA output created by 810
+Create the original files
+Compare files
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-810/file1
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-810/file2
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-810/file3
+mmap CoW the second file
+Compare files
+60ebe700450b6015c17fa15cacb9493b TEST_DIR/test-810/file1
+795ecfd281dbda4916431376228e4187 TEST_DIR/test-810/file2
+795ecfd281dbda4916431376228e4187 TEST_DIR/test-810/file3
+Files 1-2 do not match (intentional)
+Files 1-3 do not match (intentional)
+Compare the CoW'd section to the before file
+Start sections do not match (intentional)
+Middle sections do not match (intentional)
+End sections do not match (intentional)
+Compare the CoW'd section to the after file
+Compare the not CoW'd sections
diff --git a/tests/generic/837 b/tests/generic/837
new file mode 100755
index 0000000..de5f233
--- /dev/null
+++ b/tests/generic/837
@@ -0,0 +1,91 @@
+#! /bin/bash
+# FS QA Test No. 837
+#
+# Ensure that reflinking a file N times and CoWing the copies leaves the
+# original intact.
+# - Create a file and record its hash
+# - Create some reflink copies
+# - Rewrite all the reflink copies
+# - Compare the contents of the original file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ=65536
+NR=9
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+csum="$(_md5_checksum "$TESTDIR/file1")"
+
+echo "Create the reflink copies"
+seq 2 $NR | while read i; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+
+echo "Rewrite the copies"
+seq 2 $NR | while read i; do
+ _pwrite_byte 0x62 0 $((BLKSZ * 256)) "$TESTDIR/file$i" >> "$seqres.full"
+done
+_test_remount
+
+echo "Examine original file"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+mod_csum="$(_md5_checksum "$TESTDIR/file2")"
+new_csum="$(_md5_checksum "$TESTDIR/file1")"
+test "${csum}" != "${mod_csum}" || echo "checksums do not match"
+test "${csum}" = "${new_csum}" || echo "checksums do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/837.out b/tests/generic/837.out
new file mode 100644
index 0000000..3f9c2e5
--- /dev/null
+++ b/tests/generic/837.out
@@ -0,0 +1,8 @@
+QA output created by 837
+Create the original file blocks
+f4820540fc0ac02750739896fe028d56 TEST_DIR/test-837/file1
+Create the reflink copies
+Rewrite the copies
+Examine original file
+f4820540fc0ac02750739896fe028d56 TEST_DIR/test-837/file1
+eb34153e9ed1e774db28cbbe4090a449 TEST_DIR/test-837/file2
diff --git a/tests/generic/838 b/tests/generic/838
new file mode 100755
index 0000000..1130a2c
--- /dev/null
+++ b/tests/generic/838
@@ -0,0 +1,91 @@
+#! /bin/bash
+# FS QA Test No. 838
+#
+# Ensure that reflinking a file N times and DIO CoWing the copies leaves the
+# original intact.
+# - Create a file and record its hash
+# - Create some reflink copies
+# - Rewrite all the reflink copies w/ directio
+# - Compare the contents of the original file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ=65536
+NR=9
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+csum="$(_md5_checksum "$TESTDIR/file1")"
+
+echo "Create the reflink copies"
+seq 2 $NR | while read i; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+
+echo "Rewrite the copies"
+seq 2 $NR | while read i; do
+ _pwrite_byte 0x62 0 $((BLKSZ * 256)) "$TESTDIR/file$i" -d >> "$seqres.full"
+done
+_test_remount
+
+echo "Examine original file"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+mod_csum="$(_md5_checksum "$TESTDIR/file2")"
+new_csum="$(_md5_checksum "$TESTDIR/file1")"
+test "${csum}" != "${mod_csum}" || echo "checksums do not match"
+test "${csum}" = "${new_csum}" || echo "checksums do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/838.out b/tests/generic/838.out
new file mode 100644
index 0000000..cc44815
--- /dev/null
+++ b/tests/generic/838.out
@@ -0,0 +1,8 @@
+QA output created by 838
+Create the original file blocks
+f4820540fc0ac02750739896fe028d56 TEST_DIR/test-838/file1
+Create the reflink copies
+Rewrite the copies
+Examine original file
+f4820540fc0ac02750739896fe028d56 TEST_DIR/test-838/file1
+eb34153e9ed1e774db28cbbe4090a449 TEST_DIR/test-838/file2
diff --git a/tests/generic/group b/tests/generic/group
index 7f25037..a72d416 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -216,6 +216,11 @@
805 auto quick clone
806 auto quick clone
807 auto quick clone
+808 auto quick clone
+809 auto quick clone
+810 auto quick clone
817 auto quick clone
818 auto quick clone
819 auto quick clone
+837 auto quick clone
+838 auto quick clone
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 05/11] reflink: test the various fallocate modes
2015-11-11 19:26 ` Darrick J. Wong
@ 2015-11-11 19:27 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Check that the variants of fallocate (allocate, punch, zero range,
collapse range, insert range) do the right thing when they're run
against a range of reflinked blocks.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/811 | 142 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/811.out | 16 ++++++
tests/generic/812 | 142 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/812.out | 19 +++++++
tests/generic/813 | 136 +++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/813.out | 19 +++++++
tests/generic/814 | 139 ++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/814.out | 19 +++++++
tests/generic/815 | 116 ++++++++++++++++++++++++++++++++++++++++
tests/generic/815.out | 15 +++++
tests/generic/816 | 136 +++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/816.out | 19 +++++++
tests/generic/group | 6 ++
13 files changed, 924 insertions(+)
create mode 100755 tests/generic/811
create mode 100644 tests/generic/811.out
create mode 100755 tests/generic/812
create mode 100644 tests/generic/812.out
create mode 100755 tests/generic/813
create mode 100644 tests/generic/813.out
create mode 100755 tests/generic/814
create mode 100644 tests/generic/814.out
create mode 100755 tests/generic/815
create mode 100644 tests/generic/815.out
create mode 100755 tests/generic/816
create mode 100644 tests/generic/816.out
diff --git a/tests/generic/811 b/tests/generic/811
new file mode 100755
index 0000000..7b09c05
--- /dev/null
+++ b/tests/generic/811
@@ -0,0 +1,142 @@
+#! /bin/bash
+# FS QA Test No. 811
+#
+# Ensure that fallocate steps around reflinked ranges:
+# - Reflink parts of two files together
+# - Fallocate all the other sparse space.
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "falloc"
+_require_xfs_io_command "truncate"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 5 + 37)) "$TESTDIR/file1" >> "$seqres.full"
+
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ \
+ $((BLKSZ * 4 + 37)) >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "truncate $((BLKSZ * 5 + 37))" "$TESTDIR/file3" >> "$seqres.full"
+_reflink_range "$TESTDIR/file1" 0 "$TESTDIR/file3" 0 $BLKSZ >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "truncate $((BLKSZ * 5 + 37))" "$TESTDIR/file4" >> "$seqres.full"
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file4" $BLKSZ $BLKSZ >> "$seqres.full"
+_reflink_range "$TESTDIR/file1" $((BLKSZ * 3)) "$TESTDIR/file4" $((BLKSZ * 3)) \
+ $BLKSZ >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file5"
+_test_remount
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file5" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ \
+ $((BLKSZ * 4 + 37)) \
+ || echo "shared parts of files 1-2 changed"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file3" 0 $BLKSZ \
+ || echo "shared parts of files 1-3 changed"
+
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file4" $BLKSZ $BLKSZ \
+ || echo "shared parts of files 1-4 changed"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file5" 0 $((BLKSZ * 5 + 37)) \
+ || echo "shared parts of files 1-5 changed"
+
+echo "Compare files"
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+C5="$(_md5_checksum "$TESTDIR/file5")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C1}" = "${C5}" || echo "file1 and file5 should match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C2}" != "${C5}" || echo "file2 and file5 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+test "${C3}" != "${C5}" || echo "file3 and file5 should not match"
+test "${C4}" != "${C5}" || echo "file4 and file5 should not match"
+
+echo "falloc everything"
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 5))" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 5))" "$TESTDIR/file3" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 5))" "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file5" | _filter_test_dir
+
+D1="$(_md5_checksum "$TESTDIR/file1")"
+D2="$(_md5_checksum "$TESTDIR/file2")"
+D3="$(_md5_checksum "$TESTDIR/file3")"
+D4="$(_md5_checksum "$TESTDIR/file4")"
+D5="$(_md5_checksum "$TESTDIR/file5")"
+
+test "${C1}" = "${D1}" || echo "file1 should not change"
+test "${C2}" = "${D2}" || echo "file2 should not change"
+test "${C3}" = "${D3}" || echo "file3 should not change"
+test "${C4}" = "${D4}" || echo "file4 should not change"
+test "${C5}" = "${D5}" || echo "file2 should not change"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/811.out b/tests/generic/811.out
new file mode 100644
index 0000000..950613a
--- /dev/null
+++ b/tests/generic/811.out
@@ -0,0 +1,16 @@
+QA output created by 811
+Create the original files
+Compare sections
+ee8004e6298fa128477bd4aa1adc69fb TEST_DIR/test-811/file1
+a7cb8cb9697d59413e0d10495d226398 TEST_DIR/test-811/file2
+7d42a0a2865c94f45435a2ce7627da02 TEST_DIR/test-811/file3
+7f528bc76f4d61ff9cff7bc1906579c6 TEST_DIR/test-811/file4
+ee8004e6298fa128477bd4aa1adc69fb TEST_DIR/test-811/file5
+Compare files
+falloc everything
+Compare files
+ee8004e6298fa128477bd4aa1adc69fb TEST_DIR/test-811/file1
+a7cb8cb9697d59413e0d10495d226398 TEST_DIR/test-811/file2
+7d42a0a2865c94f45435a2ce7627da02 TEST_DIR/test-811/file3
+7f528bc76f4d61ff9cff7bc1906579c6 TEST_DIR/test-811/file4
+ee8004e6298fa128477bd4aa1adc69fb TEST_DIR/test-811/file5
diff --git a/tests/generic/812 b/tests/generic/812
new file mode 100755
index 0000000..0c7647f
--- /dev/null
+++ b/tests/generic/812
@@ -0,0 +1,142 @@
+#! /bin/bash
+# FS QA Test No. 812
+#
+# Ensure that collapse range steps around reflinked ranges:
+# - Create three reflink clones of a file
+# - Collapse the start, middle, and end of the reflink range of each
+# of the three files, respectively
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "falloc"
+_require_xfs_io_command "fcollapse"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file3"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file4"
+
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 4))" "$TESTDIR/file1"
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 4))" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 4))" "$TESTDIR/file3"
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 4))" "$TESTDIR/file4"
+
+_pwrite_byte 0x62 0 $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $BLKSZ $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C1}" = "${C4}" || echo "file1 and file4 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+test "${C2}" = "${C4}" || echo "file2 and file4 should match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "fcollapse files"
+"$XFS_IO_PROG" -f -c "fcollapse 0 $BLKSZ" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "fcollapse $BLKSZ $BLKSZ" "$TESTDIR/file3"
+"$XFS_IO_PROG" -f -c "fcollapse $((BLKSZ * 2)) $BLKSZ" "$TESTDIR/file4"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+cmp -s "$TESTDIR/file3" "$TESTDIR/file3.chk" || echo "file3 and file3.chk do not match"
+cmp -s "$TESTDIR/file4" "$TESTDIR/file4.chk" || echo "file4 and file4.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/812.out b/tests/generic/812.out
new file mode 100644
index 0000000..16dc3df
--- /dev/null
+++ b/tests/generic/812.out
@@ -0,0 +1,19 @@
+QA output created by 812
+Create the original files
+564b34fb4a562f6d864f371248e48540 TEST_DIR/test-812/file1
+564b34fb4a562f6d864f371248e48540 TEST_DIR/test-812/file2
+564b34fb4a562f6d864f371248e48540 TEST_DIR/test-812/file3
+564b34fb4a562f6d864f371248e48540 TEST_DIR/test-812/file4
+9a239246ce4bee20f2de1b0ba41a41e0 TEST_DIR/test-812/file2.chk
+859c251680d8bbf0f859f5c6d7a6a2a2 TEST_DIR/test-812/file3.chk
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-812/file4.chk
+fcollapse files
+Compare files
+564b34fb4a562f6d864f371248e48540 TEST_DIR/test-812/file1
+9a239246ce4bee20f2de1b0ba41a41e0 TEST_DIR/test-812/file2
+859c251680d8bbf0f859f5c6d7a6a2a2 TEST_DIR/test-812/file3
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-812/file4
+9a239246ce4bee20f2de1b0ba41a41e0 TEST_DIR/test-812/file2.chk
+859c251680d8bbf0f859f5c6d7a6a2a2 TEST_DIR/test-812/file3.chk
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-812/file4.chk
+Compare against check files
diff --git a/tests/generic/813 b/tests/generic/813
new file mode 100755
index 0000000..d313bc7
--- /dev/null
+++ b/tests/generic/813
@@ -0,0 +1,136 @@
+#! /bin/bash
+# FS QA Test No. 813
+#
+# Ensure that punch-hole steps around reflinked ranges:
+# - Create three reflink clones of a file
+# - Punch the start, middle, and end of the reflink range of each
+# of the three files, respectively
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fpunch"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file3"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file4"
+
+_pwrite_byte 0x00 0 $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $BLKSZ $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C1}" = "${C4}" || echo "file1 and file4 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+test "${C2}" = "${C4}" || echo "file2 and file4 should match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "fpunch files"
+"$XFS_IO_PROG" -f -c "fpunch 0 $BLKSZ" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "fpunch $BLKSZ $BLKSZ" "$TESTDIR/file3"
+"$XFS_IO_PROG" -f -c "fpunch $((BLKSZ * 2)) $BLKSZ" "$TESTDIR/file4"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+cmp -s "$TESTDIR/file3" "$TESTDIR/file3.chk" || echo "file3 and file3.chk do not match"
+cmp -s "$TESTDIR/file4" "$TESTDIR/file4.chk" || echo "file4 and file4.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/813.out b/tests/generic/813.out
new file mode 100644
index 0000000..98fda42
--- /dev/null
+++ b/tests/generic/813.out
@@ -0,0 +1,19 @@
+QA output created by 813
+Create the original files
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-813/file1
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-813/file2
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-813/file3
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-813/file4
+e263fae701bc40c23a3edb20aad5573e TEST_DIR/test-813/file2.chk
+91722d7c8baf83f300a8dc35f1ffcce2 TEST_DIR/test-813/file3.chk
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-813/file4.chk
+fpunch files
+Compare files
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-813/file1
+e263fae701bc40c23a3edb20aad5573e TEST_DIR/test-813/file2
+91722d7c8baf83f300a8dc35f1ffcce2 TEST_DIR/test-813/file3
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-813/file4
+e263fae701bc40c23a3edb20aad5573e TEST_DIR/test-813/file2.chk
+91722d7c8baf83f300a8dc35f1ffcce2 TEST_DIR/test-813/file3.chk
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-813/file4.chk
+Compare against check files
diff --git a/tests/generic/814 b/tests/generic/814
new file mode 100755
index 0000000..c35bdd9
--- /dev/null
+++ b/tests/generic/814
@@ -0,0 +1,139 @@
+#! /bin/bash
+# FS QA Test No. 812
+#
+# Ensure that insert range steps around reflinked ranges:
+# - Create three reflink clones of a file
+# - Insert into the start, middle, and end of the reflink range of each
+# of the three files, respectively
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "finsert"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file3"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file4"
+
+_pwrite_byte 0x00 0 $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x61 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $BLKSZ $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C1}" = "${C4}" || echo "file1 and file4 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+test "${C2}" = "${C4}" || echo "file2 and file4 should match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "finsert files"
+"$XFS_IO_PROG" -f -c "finsert 0 $BLKSZ" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "finsert $BLKSZ $BLKSZ" "$TESTDIR/file3"
+"$XFS_IO_PROG" -f -c "finsert $((BLKSZ * 2)) $BLKSZ" "$TESTDIR/file4"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+cmp -s "$TESTDIR/file3" "$TESTDIR/file3.chk" || echo "file3 and file3.chk do not match"
+cmp -s "$TESTDIR/file4" "$TESTDIR/file4.chk" || echo "file4 and file4.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/814.out b/tests/generic/814.out
new file mode 100644
index 0000000..6093561
--- /dev/null
+++ b/tests/generic/814.out
@@ -0,0 +1,19 @@
+QA output created by 814
+Create the original files
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-814/file1
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-814/file2
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-814/file3
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-814/file4
+2b0921503c9f661b7690ac5b42f01f97 TEST_DIR/test-814/file2.chk
+c424badbaad621c331a8ef213b78ac2a TEST_DIR/test-814/file3.chk
+33b4940294a1d94bee813907d6105ff7 TEST_DIR/test-814/file4.chk
+finsert files
+Compare files
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-814/file1
+2b0921503c9f661b7690ac5b42f01f97 TEST_DIR/test-814/file2
+c424badbaad621c331a8ef213b78ac2a TEST_DIR/test-814/file3
+33b4940294a1d94bee813907d6105ff7 TEST_DIR/test-814/file4
+2b0921503c9f661b7690ac5b42f01f97 TEST_DIR/test-814/file2.chk
+c424badbaad621c331a8ef213b78ac2a TEST_DIR/test-814/file3.chk
+33b4940294a1d94bee813907d6105ff7 TEST_DIR/test-814/file4.chk
+Compare against check files
diff --git a/tests/generic/815 b/tests/generic/815
new file mode 100755
index 0000000..8d545ee
--- /dev/null
+++ b/tests/generic/815
@@ -0,0 +1,116 @@
+#! /bin/bash
+# FS QA Test No. 815
+#
+# Ensure that truncating the last block in a reflinked file CoWs appropriately:
+# - Create a file that doesn't end on a block boundary
+# - Create two reflink clones of the file
+# - Shorten one of the clones with truncate
+# - Lengthen the other clone with truncate
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "truncate"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ 37 "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file3"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ 34 "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ 37 "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ + 37)) 3 "$TESTDIR/file3.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+
+echo "truncate files"
+"$XFS_IO_PROG" -f -c "truncate $((BLKSZ + 34))" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "truncate $((BLKSZ + 40))" "$TESTDIR/file3"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+cmp -s "$TESTDIR/file3" "$TESTDIR/file3.chk" || echo "file3 and file3.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/815.out b/tests/generic/815.out
new file mode 100644
index 0000000..8c36c2d
--- /dev/null
+++ b/tests/generic/815.out
@@ -0,0 +1,15 @@
+QA output created by 815
+Create the original files
+f924bdda449af63913cad4357e39301e TEST_DIR/test-815/file1
+f924bdda449af63913cad4357e39301e TEST_DIR/test-815/file2
+f924bdda449af63913cad4357e39301e TEST_DIR/test-815/file3
+16cb529abe447a9f203a3d5eb3433c8b TEST_DIR/test-815/file2.chk
+6f042ad39f6c74f4b73936db89baa2e2 TEST_DIR/test-815/file3.chk
+truncate files
+Compare files
+f924bdda449af63913cad4357e39301e TEST_DIR/test-815/file1
+16cb529abe447a9f203a3d5eb3433c8b TEST_DIR/test-815/file2
+6f042ad39f6c74f4b73936db89baa2e2 TEST_DIR/test-815/file3
+16cb529abe447a9f203a3d5eb3433c8b TEST_DIR/test-815/file2.chk
+6f042ad39f6c74f4b73936db89baa2e2 TEST_DIR/test-815/file3.chk
+Compare against check files
diff --git a/tests/generic/816 b/tests/generic/816
new file mode 100755
index 0000000..44b5ae4
--- /dev/null
+++ b/tests/generic/816
@@ -0,0 +1,136 @@
+#! /bin/bash
+# FS QA Test No. 813
+#
+# Ensure that zero-range steps around reflinked ranges:
+# - Create three reflink clones of a file
+# - Zero-range the start, middle, and end of the reflink range of each
+# of the three files, respectively
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fzero"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file3"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file4"
+
+_pwrite_byte 0x00 0 $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $BLKSZ $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C1}" = "${C4}" || echo "file1 and file4 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+test "${C2}" = "${C4}" || echo "file2 and file4 should match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "fzero files"
+"$XFS_IO_PROG" -f -c "fzero 0 $BLKSZ" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "fzero $BLKSZ $BLKSZ" "$TESTDIR/file3"
+"$XFS_IO_PROG" -f -c "fzero $((BLKSZ * 2)) $BLKSZ" "$TESTDIR/file4"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+cmp -s "$TESTDIR/file3" "$TESTDIR/file3.chk" || echo "file3 and file3.chk do not match"
+cmp -s "$TESTDIR/file4" "$TESTDIR/file4.chk" || echo "file4 and file4.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/816.out b/tests/generic/816.out
new file mode 100644
index 0000000..f3e1396
--- /dev/null
+++ b/tests/generic/816.out
@@ -0,0 +1,19 @@
+QA output created by 816
+Create the original files
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-816/file1
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-816/file2
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-816/file3
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-816/file4
+e263fae701bc40c23a3edb20aad5573e TEST_DIR/test-816/file2.chk
+91722d7c8baf83f300a8dc35f1ffcce2 TEST_DIR/test-816/file3.chk
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-816/file4.chk
+fzero files
+Compare files
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-816/file1
+e263fae701bc40c23a3edb20aad5573e TEST_DIR/test-816/file2
+91722d7c8baf83f300a8dc35f1ffcce2 TEST_DIR/test-816/file3
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-816/file4
+e263fae701bc40c23a3edb20aad5573e TEST_DIR/test-816/file2.chk
+91722d7c8baf83f300a8dc35f1ffcce2 TEST_DIR/test-816/file3.chk
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-816/file4.chk
+Compare against check files
diff --git a/tests/generic/group b/tests/generic/group
index a72d416..58c68c8 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -219,6 +219,12 @@
808 auto quick clone
809 auto quick clone
810 auto quick clone
+811 auto quick clone
+812 auto quick clone
+813 auto quick clone
+814 auto quick clone
+815 auto quick clone
+816 auto quick clone
817 auto quick clone
818 auto quick clone
819 auto quick clone
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH 05/11] reflink: test the various fallocate modes
@ 2015-11-11 19:27 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Check that the variants of fallocate (allocate, punch, zero range,
collapse range, insert range) do the right thing when they're run
against a range of reflinked blocks.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/811 | 142 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/811.out | 16 ++++++
tests/generic/812 | 142 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/812.out | 19 +++++++
tests/generic/813 | 136 +++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/813.out | 19 +++++++
tests/generic/814 | 139 ++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/814.out | 19 +++++++
tests/generic/815 | 116 ++++++++++++++++++++++++++++++++++++++++
tests/generic/815.out | 15 +++++
tests/generic/816 | 136 +++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/816.out | 19 +++++++
tests/generic/group | 6 ++
13 files changed, 924 insertions(+)
create mode 100755 tests/generic/811
create mode 100644 tests/generic/811.out
create mode 100755 tests/generic/812
create mode 100644 tests/generic/812.out
create mode 100755 tests/generic/813
create mode 100644 tests/generic/813.out
create mode 100755 tests/generic/814
create mode 100644 tests/generic/814.out
create mode 100755 tests/generic/815
create mode 100644 tests/generic/815.out
create mode 100755 tests/generic/816
create mode 100644 tests/generic/816.out
diff --git a/tests/generic/811 b/tests/generic/811
new file mode 100755
index 0000000..7b09c05
--- /dev/null
+++ b/tests/generic/811
@@ -0,0 +1,142 @@
+#! /bin/bash
+# FS QA Test No. 811
+#
+# Ensure that fallocate steps around reflinked ranges:
+# - Reflink parts of two files together
+# - Fallocate all the other sparse space.
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "falloc"
+_require_xfs_io_command "truncate"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 5 + 37)) "$TESTDIR/file1" >> "$seqres.full"
+
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ \
+ $((BLKSZ * 4 + 37)) >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "truncate $((BLKSZ * 5 + 37))" "$TESTDIR/file3" >> "$seqres.full"
+_reflink_range "$TESTDIR/file1" 0 "$TESTDIR/file3" 0 $BLKSZ >> "$seqres.full"
+
+"$XFS_IO_PROG" -f -c "truncate $((BLKSZ * 5 + 37))" "$TESTDIR/file4" >> "$seqres.full"
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file4" $BLKSZ $BLKSZ >> "$seqres.full"
+_reflink_range "$TESTDIR/file1" $((BLKSZ * 3)) "$TESTDIR/file4" $((BLKSZ * 3)) \
+ $BLKSZ >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file5"
+_test_remount
+
+echo "Compare sections"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file5" | _filter_test_dir
+
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $BLKSZ \
+ $((BLKSZ * 4 + 37)) \
+ || echo "shared parts of files 1-2 changed"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file3" 0 $BLKSZ \
+ || echo "shared parts of files 1-3 changed"
+
+_compare_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file4" $BLKSZ $BLKSZ \
+ || echo "shared parts of files 1-4 changed"
+
+_compare_range "$TESTDIR/file1" 0 "$TESTDIR/file5" 0 $((BLKSZ * 5 + 37)) \
+ || echo "shared parts of files 1-5 changed"
+
+echo "Compare files"
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+C5="$(_md5_checksum "$TESTDIR/file5")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C1}" = "${C5}" || echo "file1 and file5 should match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C2}" != "${C5}" || echo "file2 and file5 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+test "${C3}" != "${C5}" || echo "file3 and file5 should not match"
+test "${C4}" != "${C5}" || echo "file4 and file5 should not match"
+
+echo "falloc everything"
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 5))" "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 5))" "$TESTDIR/file3" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 5))" "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file5" | _filter_test_dir
+
+D1="$(_md5_checksum "$TESTDIR/file1")"
+D2="$(_md5_checksum "$TESTDIR/file2")"
+D3="$(_md5_checksum "$TESTDIR/file3")"
+D4="$(_md5_checksum "$TESTDIR/file4")"
+D5="$(_md5_checksum "$TESTDIR/file5")"
+
+test "${C1}" = "${D1}" || echo "file1 should not change"
+test "${C2}" = "${D2}" || echo "file2 should not change"
+test "${C3}" = "${D3}" || echo "file3 should not change"
+test "${C4}" = "${D4}" || echo "file4 should not change"
+test "${C5}" = "${D5}" || echo "file2 should not change"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/811.out b/tests/generic/811.out
new file mode 100644
index 0000000..950613a
--- /dev/null
+++ b/tests/generic/811.out
@@ -0,0 +1,16 @@
+QA output created by 811
+Create the original files
+Compare sections
+ee8004e6298fa128477bd4aa1adc69fb TEST_DIR/test-811/file1
+a7cb8cb9697d59413e0d10495d226398 TEST_DIR/test-811/file2
+7d42a0a2865c94f45435a2ce7627da02 TEST_DIR/test-811/file3
+7f528bc76f4d61ff9cff7bc1906579c6 TEST_DIR/test-811/file4
+ee8004e6298fa128477bd4aa1adc69fb TEST_DIR/test-811/file5
+Compare files
+falloc everything
+Compare files
+ee8004e6298fa128477bd4aa1adc69fb TEST_DIR/test-811/file1
+a7cb8cb9697d59413e0d10495d226398 TEST_DIR/test-811/file2
+7d42a0a2865c94f45435a2ce7627da02 TEST_DIR/test-811/file3
+7f528bc76f4d61ff9cff7bc1906579c6 TEST_DIR/test-811/file4
+ee8004e6298fa128477bd4aa1adc69fb TEST_DIR/test-811/file5
diff --git a/tests/generic/812 b/tests/generic/812
new file mode 100755
index 0000000..0c7647f
--- /dev/null
+++ b/tests/generic/812
@@ -0,0 +1,142 @@
+#! /bin/bash
+# FS QA Test No. 812
+#
+# Ensure that collapse range steps around reflinked ranges:
+# - Create three reflink clones of a file
+# - Collapse the start, middle, and end of the reflink range of each
+# of the three files, respectively
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "falloc"
+_require_xfs_io_command "fcollapse"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file3"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file4"
+
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 4))" "$TESTDIR/file1"
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 4))" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 4))" "$TESTDIR/file3"
+"$XFS_IO_PROG" -f -c "falloc 0 $((BLKSZ * 4))" "$TESTDIR/file4"
+
+_pwrite_byte 0x62 0 $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $BLKSZ $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C1}" = "${C4}" || echo "file1 and file4 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+test "${C2}" = "${C4}" || echo "file2 and file4 should match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "fcollapse files"
+"$XFS_IO_PROG" -f -c "fcollapse 0 $BLKSZ" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "fcollapse $BLKSZ $BLKSZ" "$TESTDIR/file3"
+"$XFS_IO_PROG" -f -c "fcollapse $((BLKSZ * 2)) $BLKSZ" "$TESTDIR/file4"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+cmp -s "$TESTDIR/file3" "$TESTDIR/file3.chk" || echo "file3 and file3.chk do not match"
+cmp -s "$TESTDIR/file4" "$TESTDIR/file4.chk" || echo "file4 and file4.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/812.out b/tests/generic/812.out
new file mode 100644
index 0000000..16dc3df
--- /dev/null
+++ b/tests/generic/812.out
@@ -0,0 +1,19 @@
+QA output created by 812
+Create the original files
+564b34fb4a562f6d864f371248e48540 TEST_DIR/test-812/file1
+564b34fb4a562f6d864f371248e48540 TEST_DIR/test-812/file2
+564b34fb4a562f6d864f371248e48540 TEST_DIR/test-812/file3
+564b34fb4a562f6d864f371248e48540 TEST_DIR/test-812/file4
+9a239246ce4bee20f2de1b0ba41a41e0 TEST_DIR/test-812/file2.chk
+859c251680d8bbf0f859f5c6d7a6a2a2 TEST_DIR/test-812/file3.chk
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-812/file4.chk
+fcollapse files
+Compare files
+564b34fb4a562f6d864f371248e48540 TEST_DIR/test-812/file1
+9a239246ce4bee20f2de1b0ba41a41e0 TEST_DIR/test-812/file2
+859c251680d8bbf0f859f5c6d7a6a2a2 TEST_DIR/test-812/file3
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-812/file4
+9a239246ce4bee20f2de1b0ba41a41e0 TEST_DIR/test-812/file2.chk
+859c251680d8bbf0f859f5c6d7a6a2a2 TEST_DIR/test-812/file3.chk
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-812/file4.chk
+Compare against check files
diff --git a/tests/generic/813 b/tests/generic/813
new file mode 100755
index 0000000..d313bc7
--- /dev/null
+++ b/tests/generic/813
@@ -0,0 +1,136 @@
+#! /bin/bash
+# FS QA Test No. 813
+#
+# Ensure that punch-hole steps around reflinked ranges:
+# - Create three reflink clones of a file
+# - Punch the start, middle, and end of the reflink range of each
+# of the three files, respectively
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fpunch"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file3"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file4"
+
+_pwrite_byte 0x00 0 $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $BLKSZ $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C1}" = "${C4}" || echo "file1 and file4 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+test "${C2}" = "${C4}" || echo "file2 and file4 should match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "fpunch files"
+"$XFS_IO_PROG" -f -c "fpunch 0 $BLKSZ" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "fpunch $BLKSZ $BLKSZ" "$TESTDIR/file3"
+"$XFS_IO_PROG" -f -c "fpunch $((BLKSZ * 2)) $BLKSZ" "$TESTDIR/file4"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+cmp -s "$TESTDIR/file3" "$TESTDIR/file3.chk" || echo "file3 and file3.chk do not match"
+cmp -s "$TESTDIR/file4" "$TESTDIR/file4.chk" || echo "file4 and file4.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/813.out b/tests/generic/813.out
new file mode 100644
index 0000000..98fda42
--- /dev/null
+++ b/tests/generic/813.out
@@ -0,0 +1,19 @@
+QA output created by 813
+Create the original files
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-813/file1
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-813/file2
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-813/file3
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-813/file4
+e263fae701bc40c23a3edb20aad5573e TEST_DIR/test-813/file2.chk
+91722d7c8baf83f300a8dc35f1ffcce2 TEST_DIR/test-813/file3.chk
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-813/file4.chk
+fpunch files
+Compare files
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-813/file1
+e263fae701bc40c23a3edb20aad5573e TEST_DIR/test-813/file2
+91722d7c8baf83f300a8dc35f1ffcce2 TEST_DIR/test-813/file3
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-813/file4
+e263fae701bc40c23a3edb20aad5573e TEST_DIR/test-813/file2.chk
+91722d7c8baf83f300a8dc35f1ffcce2 TEST_DIR/test-813/file3.chk
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-813/file4.chk
+Compare against check files
diff --git a/tests/generic/814 b/tests/generic/814
new file mode 100755
index 0000000..c35bdd9
--- /dev/null
+++ b/tests/generic/814
@@ -0,0 +1,139 @@
+#! /bin/bash
+# FS QA Test No. 812
+#
+# Ensure that insert range steps around reflinked ranges:
+# - Create three reflink clones of a file
+# - Insert into the start, middle, and end of the reflink range of each
+# of the three files, respectively
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "finsert"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file3"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file4"
+
+_pwrite_byte 0x00 0 $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x61 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $BLKSZ $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 3)) $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C1}" = "${C4}" || echo "file1 and file4 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+test "${C2}" = "${C4}" || echo "file2 and file4 should match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "finsert files"
+"$XFS_IO_PROG" -f -c "finsert 0 $BLKSZ" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "finsert $BLKSZ $BLKSZ" "$TESTDIR/file3"
+"$XFS_IO_PROG" -f -c "finsert $((BLKSZ * 2)) $BLKSZ" "$TESTDIR/file4"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+cmp -s "$TESTDIR/file3" "$TESTDIR/file3.chk" || echo "file3 and file3.chk do not match"
+cmp -s "$TESTDIR/file4" "$TESTDIR/file4.chk" || echo "file4 and file4.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/814.out b/tests/generic/814.out
new file mode 100644
index 0000000..6093561
--- /dev/null
+++ b/tests/generic/814.out
@@ -0,0 +1,19 @@
+QA output created by 814
+Create the original files
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-814/file1
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-814/file2
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-814/file3
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-814/file4
+2b0921503c9f661b7690ac5b42f01f97 TEST_DIR/test-814/file2.chk
+c424badbaad621c331a8ef213b78ac2a TEST_DIR/test-814/file3.chk
+33b4940294a1d94bee813907d6105ff7 TEST_DIR/test-814/file4.chk
+finsert files
+Compare files
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-814/file1
+2b0921503c9f661b7690ac5b42f01f97 TEST_DIR/test-814/file2
+c424badbaad621c331a8ef213b78ac2a TEST_DIR/test-814/file3
+33b4940294a1d94bee813907d6105ff7 TEST_DIR/test-814/file4
+2b0921503c9f661b7690ac5b42f01f97 TEST_DIR/test-814/file2.chk
+c424badbaad621c331a8ef213b78ac2a TEST_DIR/test-814/file3.chk
+33b4940294a1d94bee813907d6105ff7 TEST_DIR/test-814/file4.chk
+Compare against check files
diff --git a/tests/generic/815 b/tests/generic/815
new file mode 100755
index 0000000..8d545ee
--- /dev/null
+++ b/tests/generic/815
@@ -0,0 +1,116 @@
+#! /bin/bash
+# FS QA Test No. 815
+#
+# Ensure that truncating the last block in a reflinked file CoWs appropriately:
+# - Create a file that doesn't end on a block boundary
+# - Create two reflink clones of the file
+# - Shorten one of the clones with truncate
+# - Lengthen the other clone with truncate
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "truncate"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ 37 "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file3"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ 34 "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ 37 "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ + 37)) 3 "$TESTDIR/file3.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+
+echo "truncate files"
+"$XFS_IO_PROG" -f -c "truncate $((BLKSZ + 34))" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "truncate $((BLKSZ + 40))" "$TESTDIR/file3"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+cmp -s "$TESTDIR/file3" "$TESTDIR/file3.chk" || echo "file3 and file3.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/815.out b/tests/generic/815.out
new file mode 100644
index 0000000..8c36c2d
--- /dev/null
+++ b/tests/generic/815.out
@@ -0,0 +1,15 @@
+QA output created by 815
+Create the original files
+f924bdda449af63913cad4357e39301e TEST_DIR/test-815/file1
+f924bdda449af63913cad4357e39301e TEST_DIR/test-815/file2
+f924bdda449af63913cad4357e39301e TEST_DIR/test-815/file3
+16cb529abe447a9f203a3d5eb3433c8b TEST_DIR/test-815/file2.chk
+6f042ad39f6c74f4b73936db89baa2e2 TEST_DIR/test-815/file3.chk
+truncate files
+Compare files
+f924bdda449af63913cad4357e39301e TEST_DIR/test-815/file1
+16cb529abe447a9f203a3d5eb3433c8b TEST_DIR/test-815/file2
+6f042ad39f6c74f4b73936db89baa2e2 TEST_DIR/test-815/file3
+16cb529abe447a9f203a3d5eb3433c8b TEST_DIR/test-815/file2.chk
+6f042ad39f6c74f4b73936db89baa2e2 TEST_DIR/test-815/file3.chk
+Compare against check files
diff --git a/tests/generic/816 b/tests/generic/816
new file mode 100755
index 0000000..44b5ae4
--- /dev/null
+++ b/tests/generic/816
@@ -0,0 +1,136 @@
+#! /bin/bash
+# FS QA Test No. 813
+#
+# Ensure that zero-range steps around reflinked ranges:
+# - Create three reflink clones of a file
+# - Zero-range the start, middle, and end of the reflink range of each
+# of the three files, respectively
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fzero"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file3"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file4"
+
+_pwrite_byte 0x00 0 $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file2.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $BLKSZ $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+_pwrite_byte 0x63 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file3.chk" >> "$seqres.full"
+
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ * 2)) $BLKSZ "$TESTDIR/file4.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C1}" = "${C4}" || echo "file1 and file4 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+test "${C2}" = "${C4}" || echo "file2 and file4 should match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "fzero files"
+"$XFS_IO_PROG" -f -c "fzero 0 $BLKSZ" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "fzero $BLKSZ $BLKSZ" "$TESTDIR/file3"
+"$XFS_IO_PROG" -f -c "fzero $((BLKSZ * 2)) $BLKSZ" "$TESTDIR/file4"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file3" | _filter_test_dir
+md5sum "$TESTDIR/file4" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+md5sum "$TESTDIR/file3.chk" | _filter_test_dir
+md5sum "$TESTDIR/file4.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+C3="$(_md5_checksum "$TESTDIR/file3")"
+C4="$(_md5_checksum "$TESTDIR/file4")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+cmp -s "$TESTDIR/file3" "$TESTDIR/file3.chk" || echo "file3 and file3.chk do not match"
+cmp -s "$TESTDIR/file4" "$TESTDIR/file4.chk" || echo "file4 and file4.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/816.out b/tests/generic/816.out
new file mode 100644
index 0000000..f3e1396
--- /dev/null
+++ b/tests/generic/816.out
@@ -0,0 +1,19 @@
+QA output created by 816
+Create the original files
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-816/file1
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-816/file2
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-816/file3
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-816/file4
+e263fae701bc40c23a3edb20aad5573e TEST_DIR/test-816/file2.chk
+91722d7c8baf83f300a8dc35f1ffcce2 TEST_DIR/test-816/file3.chk
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-816/file4.chk
+fzero files
+Compare files
+856bb58abaf1ac79aa1aa45b7de7218b TEST_DIR/test-816/file1
+e263fae701bc40c23a3edb20aad5573e TEST_DIR/test-816/file2
+91722d7c8baf83f300a8dc35f1ffcce2 TEST_DIR/test-816/file3
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-816/file4
+e263fae701bc40c23a3edb20aad5573e TEST_DIR/test-816/file2.chk
+91722d7c8baf83f300a8dc35f1ffcce2 TEST_DIR/test-816/file3.chk
+c931e8500c1a56a5b7369f7f1b971690 TEST_DIR/test-816/file4.chk
+Compare against check files
diff --git a/tests/generic/group b/tests/generic/group
index a72d416..58c68c8 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -219,6 +219,12 @@
808 auto quick clone
809 auto quick clone
810 auto quick clone
+811 auto quick clone
+812 auto quick clone
+813 auto quick clone
+814 auto quick clone
+815 auto quick clone
+816 auto quick clone
817 auto quick clone
818 auto quick clone
819 auto quick clone
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 06/11] reflink: concurrent operations tests
2015-11-11 19:26 ` Darrick J. Wong
@ 2015-11-11 19:27 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Make sure that running reflink ops while other IO is ongoing doesn't
break the filesystem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/821 | 97 +++++++++++++++++++++++++++++++++++++++++++++
tests/generic/821.out | 6 +++
tests/generic/822 | 97 +++++++++++++++++++++++++++++++++++++++++++++
tests/generic/822.out | 6 +++
tests/generic/823 | 93 +++++++++++++++++++++++++++++++++++++++++++
tests/generic/823.out | 6 +++
tests/generic/824 | 93 +++++++++++++++++++++++++++++++++++++++++++
tests/generic/824.out | 6 +++
tests/generic/825 | 105 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/825.out | 7 +++
tests/generic/826 | 105 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/826.out | 7 +++
tests/generic/827 | 95 ++++++++++++++++++++++++++++++++++++++++++++
tests/generic/827.out | 7 +++
tests/generic/828 | 95 ++++++++++++++++++++++++++++++++++++++++++++
tests/generic/828.out | 7 +++
tests/generic/829 | 79 +++++++++++++++++++++++++++++++++++++
tests/generic/829.out | 6 +++
tests/generic/group | 9 ++++
19 files changed, 926 insertions(+)
create mode 100755 tests/generic/821
create mode 100644 tests/generic/821.out
create mode 100755 tests/generic/822
create mode 100644 tests/generic/822.out
create mode 100755 tests/generic/823
create mode 100644 tests/generic/823.out
create mode 100755 tests/generic/824
create mode 100644 tests/generic/824.out
create mode 100755 tests/generic/825
create mode 100644 tests/generic/825.out
create mode 100755 tests/generic/826
create mode 100644 tests/generic/826.out
create mode 100755 tests/generic/827
create mode 100644 tests/generic/827.out
create mode 100755 tests/generic/828
create mode 100644 tests/generic/828.out
create mode 100755 tests/generic/829
create mode 100644 tests/generic/829.out
diff --git a/tests/generic/821 b/tests/generic/821
new file mode 100755
index 0000000..d38eff7
--- /dev/null
+++ b/tests/generic/821
@@ -0,0 +1,97 @@
+#! /bin/bash
+# FS QA Test No. 821
+#
+# Test for races or FS corruption when DIO writing to a file that's also
+# the target of a reflink operation.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=1024
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((loops * BLKSZ)) "$TESTDIR/file2" >> "$seqres.full"
+_scratch_remount
+
+# Direct I/O overwriter...
+overwrite() {
+ while [ ! -e "$TESTDIR/finished" ]; do
+ seq $nr_loops -1 0 | while read i; do
+ _pwrite_byte 0x63 $((i * BLKSZ)) $BLKSZ -d "$TESTDIR/file2" >> "$seqres.full"
+ done
+ done
+}
+
+echo "Reflink and dio write the target"
+overwrite &
+seq 1 10 | while read j; do
+ seq 0 $nr_loops | while read i; do
+ _reflink_range "$TESTDIR/file1" $((i * BLKSZ)) \
+ "$TESTDIR/file2" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && exit
+ done
+done
+touch "$TESTDIR/finished"
+wait
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/821.out b/tests/generic/821.out
new file mode 100644
index 0000000..ca6bc53
--- /dev/null
+++ b/tests/generic/821.out
@@ -0,0 +1,6 @@
+QA output created by 821
+Format and mount
+Initialize files
+Reflink and dio write the target
+Check for damage
+Done
diff --git a/tests/generic/822 b/tests/generic/822
new file mode 100755
index 0000000..b37207c
--- /dev/null
+++ b/tests/generic/822
@@ -0,0 +1,97 @@
+#! /bin/bash
+# FS QA Test No. 822
+#
+# Test for races or FS corruption when writing to a file that's also
+# the target of a reflink operation.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=1024
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((loops * BLKSZ)) "$TESTDIR/file2" >> "$seqres.full"
+_scratch_remount
+
+# Direct I/O overwriter...
+overwrite() {
+ while [ ! -e "$TESTDIR/finished" ]; do
+ seq $nr_loops -1 0 | while read i; do
+ _pwrite_byte 0x63 $((i * BLKSZ)) $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+ done
+ done
+}
+
+echo "Reflink and write the target"
+overwrite &
+seq 1 10 | while read j; do
+ seq 0 $nr_loops | while read i; do
+ _reflink_range "$TESTDIR/file1" $((i * BLKSZ)) \
+ "$TESTDIR/file2" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && exit
+ done
+done
+touch "$TESTDIR/finished"
+wait
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/822.out b/tests/generic/822.out
new file mode 100644
index 0000000..14399ae
--- /dev/null
+++ b/tests/generic/822.out
@@ -0,0 +1,6 @@
+QA output created by 822
+Format and mount
+Initialize files
+Reflink and write the target
+Check for damage
+Done
diff --git a/tests/generic/823 b/tests/generic/823
new file mode 100755
index 0000000..768623d
--- /dev/null
+++ b/tests/generic/823
@@ -0,0 +1,93 @@
+#! /bin/bash
+# FS QA Test No. 823
+#
+# Test for races or FS corruption when writing to a file that's also
+# the source of a reflink operation.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=1024
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize file"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_scratch_remount
+
+# Snapshot creator...
+snappy() {
+ n=0
+ while [ ! -e "$TESTDIR/finished" ]; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/snap_$n" || break
+ n=$((n + 1))
+ done
+}
+
+echo "Snapshot a file undergoing buffered rewrite"
+snappy &
+seq $nr_loops -1 0 | while read i; do
+ _pwrite_byte 0x63 $((i * BLKSZ)) $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+done
+touch $TESTDIR/finished
+wait
+
+echo "Check for damage"
+umount $SCRATCH_MNT
+_check_scratch_fs
+
+echo "Done"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/823.out b/tests/generic/823.out
new file mode 100644
index 0000000..ef3e209
--- /dev/null
+++ b/tests/generic/823.out
@@ -0,0 +1,6 @@
+QA output created by 823
+Format and mount
+Initialize file
+Snapshot a file undergoing buffered rewrite
+Check for damage
+Done
diff --git a/tests/generic/824 b/tests/generic/824
new file mode 100755
index 0000000..7055d33
--- /dev/null
+++ b/tests/generic/824
@@ -0,0 +1,93 @@
+#! /bin/bash
+# FS QA Test No. 824
+#
+# Test for races or FS corruption when DIO writing to a file that's also
+# the source of a reflink operation.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=1024
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize file"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_scratch_remount
+
+# Snapshot creator...
+snappy() {
+ n=0
+ while [ ! -e "$TESTDIR/finished" ]; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/snap_$n" || break
+ n=$((n + 1))
+ done
+}
+
+echo "Snapshot a file undergoing directio rewrite"
+snappy &
+seq $nr_loops -1 0 | while read i; do
+ _pwrite_byte 0x63 $((i * BLKSZ)) $BLKSZ -d "$TESTDIR/file1" >> "$seqres.full"
+done
+touch $TESTDIR/finished
+wait
+
+echo "Check for damage"
+umount $SCRATCH_MNT
+_check_scratch_fs
+
+echo "Done"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/824.out b/tests/generic/824.out
new file mode 100644
index 0000000..0376736
--- /dev/null
+++ b/tests/generic/824.out
@@ -0,0 +1,6 @@
+QA output created by 824
+Format and mount
+Initialize file
+Snapshot a file undergoing directio rewrite
+Check for damage
+Done
diff --git a/tests/generic/825 b/tests/generic/825
new file mode 100755
index 0000000..2f58fb8
--- /dev/null
+++ b/tests/generic/825
@@ -0,0 +1,105 @@
+#! /bin/bash
+# FS QA Test No. 825
+#
+# Test for races or FS corruption between reflink and direct I/O reading the
+# target file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=512
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((loops * BLKSZ)) "$TESTDIR/file2" >> "$seqres.full"
+_cp_reflink $TESTDIR/file1 $TESTDIR/file3
+_scratch_remount
+
+fbytes() {
+ egrep -v '(61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61|62 62 62 62 62 62 62 62 62 62 62 62 62 62 62 62)'
+}
+
+reader() {
+ while [ ! -e "$TESTDIR/finished" ]; do
+ _read_range "$TESTDIR/file3" 0 $((loops * BLKSZ)) -d | fbytes
+ done
+}
+
+echo "Reflink and dio reread the files!"
+reader &
+for i in `seq 1 2`; do
+ seq $nr_loops -1 0 | while read i; do
+ _reflink_range "$TESTDIR/file1" $((i * BLKSZ)) \
+ "$TESTDIR/file3" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && break
+ done
+ seq $nr_loops -1 0 | while read i; do
+ _reflink_range "$TESTDIR/file2" $((i * BLKSZ)) \
+ "$TESTDIR/file3" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && break
+ done
+done
+echo "Finished reflinking"
+touch "$TESTDIR/finished"
+wait
+
+echo "Check fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+# success, all done
+status=0
+exit
diff --git a/tests/generic/825.out b/tests/generic/825.out
new file mode 100644
index 0000000..1e2f36c
--- /dev/null
+++ b/tests/generic/825.out
@@ -0,0 +1,7 @@
+QA output created by 825
+Format and mount
+Initialize files
+Reflink and dio reread the files!
+Finished reflinking
+Check fs
+Done
diff --git a/tests/generic/826 b/tests/generic/826
new file mode 100755
index 0000000..d5c8e14
--- /dev/null
+++ b/tests/generic/826
@@ -0,0 +1,105 @@
+#! /bin/bash
+# FS QA Test No. 826
+#
+# Test for races or FS corruption between reflink and buffered I/O reading the
+# target file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=512
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((loops * BLKSZ)) "$TESTDIR/file2" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file3"
+_scratch_remount
+
+fbytes() {
+ egrep -v '(61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61|62 62 62 62 62 62 62 62 62 62 62 62 62 62 62 62)'
+}
+
+reader() {
+ while [ ! -e "$TESTDIR/finished" ]; do
+ _read_range "$TESTDIR/file3" 0 $((loops * BLKSZ)) | fbytes
+ done
+}
+
+echo "Reflink and reread the files!"
+reader &
+for i in `seq 1 2`; do
+ seq $nr_loops -1 0 | while read i; do
+ _reflink_range "$TESTDIR/file1" $((i * BLKSZ)) \
+ "$TESTDIR/file3" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && break
+ done
+ seq $nr_loops -1 0 | while read i; do
+ _reflink_range "$TESTDIR/file2" $((i * BLKSZ)) \
+ "$TESTDIR/file3" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && break
+ done
+done
+echo "Finished reflinking"
+touch "$TESTDIR/finished"
+wait
+
+echo "Check fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+# success, all done
+status=0
+exit
diff --git a/tests/generic/826.out b/tests/generic/826.out
new file mode 100644
index 0000000..144f4bc
--- /dev/null
+++ b/tests/generic/826.out
@@ -0,0 +1,7 @@
+QA output created by 826
+Format and mount
+Initialize files
+Reflink and reread the files!
+Finished reflinking
+Check fs
+Done
diff --git a/tests/generic/827 b/tests/generic/827
new file mode 100755
index 0000000..ce9dbdc
--- /dev/null
+++ b/tests/generic/827
@@ -0,0 +1,95 @@
+#! /bin/bash
+# FS QA Test No. 827
+#
+# Test for race between dedupe and writing the source file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_dedupe
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=512
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file2" >> "$seqres.full"
+_scratch_remount
+
+overwrite() {
+ while [ ! -e "$TESTDIR/finished" ]; do
+ seq $nr_loops -1 0 | while read i; do
+ _pwrite_byte 0x61 $((i * BLKSZ)) $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+ done
+ done
+}
+
+echo "Dedupe and rewrite the file!"
+overwrite &
+for i in `seq 1 2`; do
+ seq $nr_loops -1 0 | while read i; do
+ _dedupe_range "$TESTDIR/file1" $((i * BLKSZ)) \
+ "$TESTDIR/file2" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && break
+ done
+done
+echo "Finished dedupeing"
+touch "$TESTDIR/finished"
+wait
+
+echo "Check fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+# success, all done
+status=0
+exit
diff --git a/tests/generic/827.out b/tests/generic/827.out
new file mode 100644
index 0000000..1b05f59
--- /dev/null
+++ b/tests/generic/827.out
@@ -0,0 +1,7 @@
+QA output created by 827
+Format and mount
+Initialize files
+Dedupe and rewrite the file!
+Finished dedupeing
+Check fs
+Done
diff --git a/tests/generic/828 b/tests/generic/828
new file mode 100755
index 0000000..39c7206
--- /dev/null
+++ b/tests/generic/828
@@ -0,0 +1,95 @@
+#! /bin/bash
+# FS QA Test No. 828
+#
+# Test for race between dedupe and writing the dest file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_dedupe
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=512
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file2" >> "$seqres.full"
+_scratch_remount
+
+overwrite() {
+ while [ ! -e "$TESTDIR/finished" ]; do
+ seq $nr_loops -1 0 | while read i; do
+ _pwrite_byte 0x61 $((i * BLKSZ)) $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+ done
+ done
+}
+
+echo "Dedupe and rewrite the file!"
+overwrite &
+for i in `seq 1 2`; do
+ seq $nr_loops -1 0 | while read i; do
+ _dedupe_range "$TESTDIR/file1" $((i * BLKSZ)) \
+ "$TESTDIR/file2" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && break
+ done
+done
+echo "Finished dedupeing"
+touch "$TESTDIR/finished"
+wait
+
+echo "Check fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+# success, all done
+status=0
+exit
diff --git a/tests/generic/828.out b/tests/generic/828.out
new file mode 100644
index 0000000..fb31777
--- /dev/null
+++ b/tests/generic/828.out
@@ -0,0 +1,7 @@
+QA output created by 828
+Format and mount
+Initialize files
+Dedupe and rewrite the file!
+Finished dedupeing
+Check fs
+Done
diff --git a/tests/generic/829 b/tests/generic/829
new file mode 100755
index 0000000..7b5a40e
--- /dev/null
+++ b/tests/generic/829
@@ -0,0 +1,79 @@
+#! /bin/bash
+# FS QA Test No. 829
+#
+# Test for race between delete a file while rewriting its reflinked twin
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=4096
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_scratch_remount
+
+echo "Delete while rewriting"
+rm -rf "$TESTDIR/file1" &
+_pwrite_byte 0x62 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+wait
+
+echo "Check fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+# success, all done
+status=0
+exit
diff --git a/tests/generic/829.out b/tests/generic/829.out
new file mode 100644
index 0000000..9cee8ba
--- /dev/null
+++ b/tests/generic/829.out
@@ -0,0 +1,6 @@
+QA output created by 829
+Format and mount
+Initialize files
+Delete while rewriting
+Check fs
+Done
diff --git a/tests/generic/group b/tests/generic/group
index 58c68c8..0c137ea 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -228,5 +228,14 @@
817 auto quick clone
818 auto quick clone
819 auto quick clone
+821 auto quick clone
+822 auto quick clone
+823 auto quick clone
+824 auto quick clone
+825 auto quick clone
+826 auto quick clone
+827 auto quick clone
+828 auto quick clone
+829 auto quick clone
837 auto quick clone
838 auto quick clone
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH 06/11] reflink: concurrent operations tests
@ 2015-11-11 19:27 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Make sure that running reflink ops while other IO is ongoing doesn't
break the filesystem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/821 | 97 +++++++++++++++++++++++++++++++++++++++++++++
tests/generic/821.out | 6 +++
tests/generic/822 | 97 +++++++++++++++++++++++++++++++++++++++++++++
tests/generic/822.out | 6 +++
tests/generic/823 | 93 +++++++++++++++++++++++++++++++++++++++++++
tests/generic/823.out | 6 +++
tests/generic/824 | 93 +++++++++++++++++++++++++++++++++++++++++++
tests/generic/824.out | 6 +++
tests/generic/825 | 105 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/825.out | 7 +++
tests/generic/826 | 105 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/826.out | 7 +++
tests/generic/827 | 95 ++++++++++++++++++++++++++++++++++++++++++++
tests/generic/827.out | 7 +++
tests/generic/828 | 95 ++++++++++++++++++++++++++++++++++++++++++++
tests/generic/828.out | 7 +++
tests/generic/829 | 79 +++++++++++++++++++++++++++++++++++++
tests/generic/829.out | 6 +++
tests/generic/group | 9 ++++
19 files changed, 926 insertions(+)
create mode 100755 tests/generic/821
create mode 100644 tests/generic/821.out
create mode 100755 tests/generic/822
create mode 100644 tests/generic/822.out
create mode 100755 tests/generic/823
create mode 100644 tests/generic/823.out
create mode 100755 tests/generic/824
create mode 100644 tests/generic/824.out
create mode 100755 tests/generic/825
create mode 100644 tests/generic/825.out
create mode 100755 tests/generic/826
create mode 100644 tests/generic/826.out
create mode 100755 tests/generic/827
create mode 100644 tests/generic/827.out
create mode 100755 tests/generic/828
create mode 100644 tests/generic/828.out
create mode 100755 tests/generic/829
create mode 100644 tests/generic/829.out
diff --git a/tests/generic/821 b/tests/generic/821
new file mode 100755
index 0000000..d38eff7
--- /dev/null
+++ b/tests/generic/821
@@ -0,0 +1,97 @@
+#! /bin/bash
+# FS QA Test No. 821
+#
+# Test for races or FS corruption when DIO writing to a file that's also
+# the target of a reflink operation.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=1024
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((loops * BLKSZ)) "$TESTDIR/file2" >> "$seqres.full"
+_scratch_remount
+
+# Direct I/O overwriter...
+overwrite() {
+ while [ ! -e "$TESTDIR/finished" ]; do
+ seq $nr_loops -1 0 | while read i; do
+ _pwrite_byte 0x63 $((i * BLKSZ)) $BLKSZ -d "$TESTDIR/file2" >> "$seqres.full"
+ done
+ done
+}
+
+echo "Reflink and dio write the target"
+overwrite &
+seq 1 10 | while read j; do
+ seq 0 $nr_loops | while read i; do
+ _reflink_range "$TESTDIR/file1" $((i * BLKSZ)) \
+ "$TESTDIR/file2" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && exit
+ done
+done
+touch "$TESTDIR/finished"
+wait
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/821.out b/tests/generic/821.out
new file mode 100644
index 0000000..ca6bc53
--- /dev/null
+++ b/tests/generic/821.out
@@ -0,0 +1,6 @@
+QA output created by 821
+Format and mount
+Initialize files
+Reflink and dio write the target
+Check for damage
+Done
diff --git a/tests/generic/822 b/tests/generic/822
new file mode 100755
index 0000000..b37207c
--- /dev/null
+++ b/tests/generic/822
@@ -0,0 +1,97 @@
+#! /bin/bash
+# FS QA Test No. 822
+#
+# Test for races or FS corruption when writing to a file that's also
+# the target of a reflink operation.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=1024
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((loops * BLKSZ)) "$TESTDIR/file2" >> "$seqres.full"
+_scratch_remount
+
+# Direct I/O overwriter...
+overwrite() {
+ while [ ! -e "$TESTDIR/finished" ]; do
+ seq $nr_loops -1 0 | while read i; do
+ _pwrite_byte 0x63 $((i * BLKSZ)) $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+ done
+ done
+}
+
+echo "Reflink and write the target"
+overwrite &
+seq 1 10 | while read j; do
+ seq 0 $nr_loops | while read i; do
+ _reflink_range "$TESTDIR/file1" $((i * BLKSZ)) \
+ "$TESTDIR/file2" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && exit
+ done
+done
+touch "$TESTDIR/finished"
+wait
+
+echo "Check for damage"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/822.out b/tests/generic/822.out
new file mode 100644
index 0000000..14399ae
--- /dev/null
+++ b/tests/generic/822.out
@@ -0,0 +1,6 @@
+QA output created by 822
+Format and mount
+Initialize files
+Reflink and write the target
+Check for damage
+Done
diff --git a/tests/generic/823 b/tests/generic/823
new file mode 100755
index 0000000..768623d
--- /dev/null
+++ b/tests/generic/823
@@ -0,0 +1,93 @@
+#! /bin/bash
+# FS QA Test No. 823
+#
+# Test for races or FS corruption when writing to a file that's also
+# the source of a reflink operation.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=1024
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize file"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_scratch_remount
+
+# Snapshot creator...
+snappy() {
+ n=0
+ while [ ! -e "$TESTDIR/finished" ]; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/snap_$n" || break
+ n=$((n + 1))
+ done
+}
+
+echo "Snapshot a file undergoing buffered rewrite"
+snappy &
+seq $nr_loops -1 0 | while read i; do
+ _pwrite_byte 0x63 $((i * BLKSZ)) $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+done
+touch $TESTDIR/finished
+wait
+
+echo "Check for damage"
+umount $SCRATCH_MNT
+_check_scratch_fs
+
+echo "Done"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/823.out b/tests/generic/823.out
new file mode 100644
index 0000000..ef3e209
--- /dev/null
+++ b/tests/generic/823.out
@@ -0,0 +1,6 @@
+QA output created by 823
+Format and mount
+Initialize file
+Snapshot a file undergoing buffered rewrite
+Check for damage
+Done
diff --git a/tests/generic/824 b/tests/generic/824
new file mode 100755
index 0000000..7055d33
--- /dev/null
+++ b/tests/generic/824
@@ -0,0 +1,93 @@
+#! /bin/bash
+# FS QA Test No. 824
+#
+# Test for races or FS corruption when DIO writing to a file that's also
+# the source of a reflink operation.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=1024
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize file"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_scratch_remount
+
+# Snapshot creator...
+snappy() {
+ n=0
+ while [ ! -e "$TESTDIR/finished" ]; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/snap_$n" || break
+ n=$((n + 1))
+ done
+}
+
+echo "Snapshot a file undergoing directio rewrite"
+snappy &
+seq $nr_loops -1 0 | while read i; do
+ _pwrite_byte 0x63 $((i * BLKSZ)) $BLKSZ -d "$TESTDIR/file1" >> "$seqres.full"
+done
+touch $TESTDIR/finished
+wait
+
+echo "Check for damage"
+umount $SCRATCH_MNT
+_check_scratch_fs
+
+echo "Done"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/824.out b/tests/generic/824.out
new file mode 100644
index 0000000..0376736
--- /dev/null
+++ b/tests/generic/824.out
@@ -0,0 +1,6 @@
+QA output created by 824
+Format and mount
+Initialize file
+Snapshot a file undergoing directio rewrite
+Check for damage
+Done
diff --git a/tests/generic/825 b/tests/generic/825
new file mode 100755
index 0000000..2f58fb8
--- /dev/null
+++ b/tests/generic/825
@@ -0,0 +1,105 @@
+#! /bin/bash
+# FS QA Test No. 825
+#
+# Test for races or FS corruption between reflink and direct I/O reading the
+# target file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=512
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((loops * BLKSZ)) "$TESTDIR/file2" >> "$seqres.full"
+_cp_reflink $TESTDIR/file1 $TESTDIR/file3
+_scratch_remount
+
+fbytes() {
+ egrep -v '(61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61|62 62 62 62 62 62 62 62 62 62 62 62 62 62 62 62)'
+}
+
+reader() {
+ while [ ! -e "$TESTDIR/finished" ]; do
+ _read_range "$TESTDIR/file3" 0 $((loops * BLKSZ)) -d | fbytes
+ done
+}
+
+echo "Reflink and dio reread the files!"
+reader &
+for i in `seq 1 2`; do
+ seq $nr_loops -1 0 | while read i; do
+ _reflink_range "$TESTDIR/file1" $((i * BLKSZ)) \
+ "$TESTDIR/file3" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && break
+ done
+ seq $nr_loops -1 0 | while read i; do
+ _reflink_range "$TESTDIR/file2" $((i * BLKSZ)) \
+ "$TESTDIR/file3" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && break
+ done
+done
+echo "Finished reflinking"
+touch "$TESTDIR/finished"
+wait
+
+echo "Check fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+# success, all done
+status=0
+exit
diff --git a/tests/generic/825.out b/tests/generic/825.out
new file mode 100644
index 0000000..1e2f36c
--- /dev/null
+++ b/tests/generic/825.out
@@ -0,0 +1,7 @@
+QA output created by 825
+Format and mount
+Initialize files
+Reflink and dio reread the files!
+Finished reflinking
+Check fs
+Done
diff --git a/tests/generic/826 b/tests/generic/826
new file mode 100755
index 0000000..d5c8e14
--- /dev/null
+++ b/tests/generic/826
@@ -0,0 +1,105 @@
+#! /bin/bash
+# FS QA Test No. 826
+#
+# Test for races or FS corruption between reflink and buffered I/O reading the
+# target file.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=512
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((loops * BLKSZ)) "$TESTDIR/file2" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file3"
+_scratch_remount
+
+fbytes() {
+ egrep -v '(61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61|62 62 62 62 62 62 62 62 62 62 62 62 62 62 62 62)'
+}
+
+reader() {
+ while [ ! -e "$TESTDIR/finished" ]; do
+ _read_range "$TESTDIR/file3" 0 $((loops * BLKSZ)) | fbytes
+ done
+}
+
+echo "Reflink and reread the files!"
+reader &
+for i in `seq 1 2`; do
+ seq $nr_loops -1 0 | while read i; do
+ _reflink_range "$TESTDIR/file1" $((i * BLKSZ)) \
+ "$TESTDIR/file3" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && break
+ done
+ seq $nr_loops -1 0 | while read i; do
+ _reflink_range "$TESTDIR/file2" $((i * BLKSZ)) \
+ "$TESTDIR/file3" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && break
+ done
+done
+echo "Finished reflinking"
+touch "$TESTDIR/finished"
+wait
+
+echo "Check fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+# success, all done
+status=0
+exit
diff --git a/tests/generic/826.out b/tests/generic/826.out
new file mode 100644
index 0000000..144f4bc
--- /dev/null
+++ b/tests/generic/826.out
@@ -0,0 +1,7 @@
+QA output created by 826
+Format and mount
+Initialize files
+Reflink and reread the files!
+Finished reflinking
+Check fs
+Done
diff --git a/tests/generic/827 b/tests/generic/827
new file mode 100755
index 0000000..ce9dbdc
--- /dev/null
+++ b/tests/generic/827
@@ -0,0 +1,95 @@
+#! /bin/bash
+# FS QA Test No. 827
+#
+# Test for race between dedupe and writing the source file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_dedupe
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=512
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file2" >> "$seqres.full"
+_scratch_remount
+
+overwrite() {
+ while [ ! -e "$TESTDIR/finished" ]; do
+ seq $nr_loops -1 0 | while read i; do
+ _pwrite_byte 0x61 $((i * BLKSZ)) $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+ done
+ done
+}
+
+echo "Dedupe and rewrite the file!"
+overwrite &
+for i in `seq 1 2`; do
+ seq $nr_loops -1 0 | while read i; do
+ _dedupe_range "$TESTDIR/file1" $((i * BLKSZ)) \
+ "$TESTDIR/file2" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && break
+ done
+done
+echo "Finished dedupeing"
+touch "$TESTDIR/finished"
+wait
+
+echo "Check fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+# success, all done
+status=0
+exit
diff --git a/tests/generic/827.out b/tests/generic/827.out
new file mode 100644
index 0000000..1b05f59
--- /dev/null
+++ b/tests/generic/827.out
@@ -0,0 +1,7 @@
+QA output created by 827
+Format and mount
+Initialize files
+Dedupe and rewrite the file!
+Finished dedupeing
+Check fs
+Done
diff --git a/tests/generic/828 b/tests/generic/828
new file mode 100755
index 0000000..39c7206
--- /dev/null
+++ b/tests/generic/828
@@ -0,0 +1,95 @@
+#! /bin/bash
+# FS QA Test No. 828
+#
+# Test for race between dedupe and writing the dest file
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_dedupe
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=512
+nr_loops=$((loops - 1))
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file2" >> "$seqres.full"
+_scratch_remount
+
+overwrite() {
+ while [ ! -e "$TESTDIR/finished" ]; do
+ seq $nr_loops -1 0 | while read i; do
+ _pwrite_byte 0x61 $((i * BLKSZ)) $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+ done
+ done
+}
+
+echo "Dedupe and rewrite the file!"
+overwrite &
+for i in `seq 1 2`; do
+ seq $nr_loops -1 0 | while read i; do
+ _dedupe_range "$TESTDIR/file1" $((i * BLKSZ)) \
+ "$TESTDIR/file2" $((i * BLKSZ)) $BLKSZ >> "$seqres.full"
+ [ $? -ne 0 ] && break
+ done
+done
+echo "Finished dedupeing"
+touch "$TESTDIR/finished"
+wait
+
+echo "Check fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+# success, all done
+status=0
+exit
diff --git a/tests/generic/828.out b/tests/generic/828.out
new file mode 100644
index 0000000..fb31777
--- /dev/null
+++ b/tests/generic/828.out
@@ -0,0 +1,7 @@
+QA output created by 828
+Format and mount
+Initialize files
+Dedupe and rewrite the file!
+Finished dedupeing
+Check fs
+Done
diff --git a/tests/generic/829 b/tests/generic/829
new file mode 100755
index 0000000..7b5a40e
--- /dev/null
+++ b/tests/generic/829
@@ -0,0 +1,79 @@
+#! /bin/bash
+# FS QA Test No. 829
+#
+# Test for race between delete a file while rewriting its reflinked twin
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 7 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+ wait
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+loops=4096
+BLKSZ=65536
+
+echo "Initialize files"
+echo > "$seqres.full"
+_pwrite_byte 0x61 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_scratch_remount
+
+echo "Delete while rewriting"
+rm -rf "$TESTDIR/file1" &
+_pwrite_byte 0x62 0 $((loops * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+wait
+
+echo "Check fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Done"
+# success, all done
+status=0
+exit
diff --git a/tests/generic/829.out b/tests/generic/829.out
new file mode 100644
index 0000000..9cee8ba
--- /dev/null
+++ b/tests/generic/829.out
@@ -0,0 +1,6 @@
+QA output created by 829
+Format and mount
+Initialize files
+Delete while rewriting
+Check fs
+Done
diff --git a/tests/generic/group b/tests/generic/group
index 58c68c8..0c137ea 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -228,5 +228,14 @@
817 auto quick clone
818 auto quick clone
819 auto quick clone
+821 auto quick clone
+822 auto quick clone
+823 auto quick clone
+824 auto quick clone
+825 auto quick clone
+826 auto quick clone
+827 auto quick clone
+828 auto quick clone
+829 auto quick clone
837 auto quick clone
838 auto quick clone
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 07/11] reflink: test accuracy of free block counts
2015-11-11 19:26 ` Darrick J. Wong
@ 2015-11-11 19:27 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Check that the free block counts seem to be handled correctly in
the reflink operation and subsequent attempts to rewrite reflinked
copies.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/830 | 78 ++++++++++++++++++++++++++++++
tests/generic/830.out | 4 ++
tests/generic/831 | 98 +++++++++++++++++++++++++++++++++++++
tests/generic/831.out | 8 +++
tests/generic/832 | 103 +++++++++++++++++++++++++++++++++++++++
tests/generic/832.out | 8 +++
tests/generic/833 | 102 +++++++++++++++++++++++++++++++++++++++
tests/generic/833.out | 8 +++
tests/generic/834 | 110 ++++++++++++++++++++++++++++++++++++++++++
tests/generic/834.out | 11 ++++
tests/generic/835 | 114 +++++++++++++++++++++++++++++++++++++++++++
tests/generic/835.out | 11 ++++
tests/generic/836 | 129 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/836.out | 32 ++++++++++++
tests/generic/group | 7 +++
15 files changed, 823 insertions(+)
create mode 100755 tests/generic/830
create mode 100644 tests/generic/830.out
create mode 100755 tests/generic/831
create mode 100644 tests/generic/831.out
create mode 100755 tests/generic/832
create mode 100644 tests/generic/832.out
create mode 100755 tests/generic/833
create mode 100644 tests/generic/833.out
create mode 100755 tests/generic/834
create mode 100644 tests/generic/834.out
create mode 100755 tests/generic/835
create mode 100644 tests/generic/835.out
create mode 100755 tests/generic/836
create mode 100644 tests/generic/836.out
diff --git a/tests/generic/830 b/tests/generic/830
new file mode 100755
index 0000000..d85bacf
--- /dev/null
+++ b/tests/generic/830
@@ -0,0 +1,78 @@
+#! /bin/bash
+# FS QA Test No. 830
+#
+# Ensure that reflinking a file N times doesn't eat a lot of blocks
+# - Create a file and record fs block usage
+# - Create some reflink copies
+# - Compare fs block usage to before
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f $TESTDIR -c '%S')"
+BLKS=2000
+MARGIN=100
+SZ=$((BLKSZ * BLKS))
+NR=7
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+sync
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file.$i"
+done
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+_within_tolerance "free blocks after reflink" $FREE_BLOCKS1 $FREE_BLOCKS0 $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/830.out b/tests/generic/830.out
new file mode 100644
index 0000000..76e2f1d
--- /dev/null
+++ b/tests/generic/830.out
@@ -0,0 +1,4 @@
+QA output created by 830
+Create the original file blocks
+Create the reflink copies
+free blocks after reflink is in range
diff --git a/tests/generic/831 b/tests/generic/831
new file mode 100755
index 0000000..d729769
--- /dev/null
+++ b/tests/generic/831
@@ -0,0 +1,98 @@
+#! /bin/bash
+# FS QA Test No. 831
+#
+# Ensure that deleting all copies of a file reflinked N times releases the blocks
+# - Record fs block usage (0)
+# - Create a file and some reflink copies
+# - Record fs block usage (1)
+# - Delete some copies of the file
+# - Record fs block usage (2)
+# - Delete all copies of the file
+# - Compare fs block usage to (2), (1), and (0)
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+BLKS=2000
+MARGIN=100
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+NR=7
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+sync
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file.$i"
+done
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/survivor"
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Delete most of the files"
+rm -rf "$TESTDIR"/file*
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Delete all the files"
+rm -rf "$TESTDIR"/*
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3
+
+_within_tolerance "free blocks after reflink" $FREE_BLOCKS1 $((FREE_BLOCKS0 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after deleting some reflink copies" $FREE_BLOCKS2 $FREE_BLOCKS1 $MARGIN -v
+
+_within_tolerance "free blocks after deleting all copies" $FREE_BLOCKS3 $FREE_BLOCKS0 $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/831.out b/tests/generic/831.out
new file mode 100644
index 0000000..88e0a23
--- /dev/null
+++ b/tests/generic/831.out
@@ -0,0 +1,8 @@
+QA output created by 831
+Create the original file blocks
+Create the reflink copies
+Delete most of the files
+Delete all the files
+free blocks after reflink is in range
+free blocks after deleting some reflink copies is in range
+free blocks after deleting all copies is in range
diff --git a/tests/generic/832 b/tests/generic/832
new file mode 100755
index 0000000..4f12b77
--- /dev/null
+++ b/tests/generic/832
@@ -0,0 +1,103 @@
+#! /bin/bash
+# FS QA Test No. 832
+#
+# Ensure that punching all copies of a file reflinked N times releases the blocks
+# - Record fs block usage (0)
+# - Create a file and some reflink copies
+# - Record fs block usage (1)
+# - Punch some blocks of the copies
+# - Record fs block usage (2)
+# - Punch all blocks of the copies
+# - Compare fs block usage to (2), (1), and (0)
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fpunch"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+BLKS=2000
+MARGIN=100
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+NR=4
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+sync
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Punch most of the blocks"
+"$XFS_IO_PROG" -f -c "fpunch 0 $SZ" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "fpunch 0 $((SZ / 2))" "$TESTDIR/file3"
+"$XFS_IO_PROG" -f -c "fpunch $((SZ / 2)) $((SZ / 2))" "$TESTDIR/file4"
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Punch all the files"
+for i in `seq 2 $NR`; do
+ "$XFS_IO_PROG" -f -c "fpunch 0 $SZ" "$TESTDIR/file$i"
+done
+"$XFS_IO_PROG" -f -c "fpunch 0 $SZ" "$TESTDIR/file1"
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3
+
+_within_tolerance "free blocks after reflink" $FREE_BLOCKS1 $((FREE_BLOCKS0 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after punching some reflink copies" $FREE_BLOCKS2 $FREE_BLOCKS1 $MARGIN -v
+
+_within_tolerance "free blocks after punching all copies" $FREE_BLOCKS3 $FREE_BLOCKS0 $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/832.out b/tests/generic/832.out
new file mode 100644
index 0000000..bb95578
--- /dev/null
+++ b/tests/generic/832.out
@@ -0,0 +1,8 @@
+QA output created by 832
+Create the original file blocks
+Create the reflink copies
+Punch most of the blocks
+Punch all the files
+free blocks after reflink is in range
+free blocks after punching some reflink copies is in range
+free blocks after punching all copies is in range
diff --git a/tests/generic/833 b/tests/generic/833
new file mode 100755
index 0000000..07dfabf
--- /dev/null
+++ b/tests/generic/833
@@ -0,0 +1,102 @@
+#! /bin/bash
+# FS QA Test No. 833
+#
+# Ensure that collapse-range on all copies of a file reflinked N times releases the blocks
+# - Record fs block usage (0)
+# - Create a file and some reflink copies
+# - Record fs block usage (1)
+# - Collapse-range some blocks of the copies
+# - Record fs block usage (2)
+# - Truncate all blocks of the copies
+# - Compare fs block usage to (2), (1), and (0)
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fcollapse"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+BLKS=2000
+MARGIN=100
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+NR=4
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Collapse most of the blocks"
+"$XFS_IO_PROG" -f -c "fcollapse 0 $(((BLKS - 1) * BLKSZ))" $TESTDIR/file2
+"$XFS_IO_PROG" -f -c "fcollapse 0 $((SZ / 2))" $TESTDIR/file3
+"$XFS_IO_PROG" -f -c "fcollapse $((SZ / 2)) $(( ((BLKS / 2) - 1) * BLKSZ))" $TESTDIR/file4
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Collpase nearly all the files"
+"$XFS_IO_PROG" -f -c "fcollapse 0 $(( ((BLKS / 2) - 1) * BLKSZ))" $TESTDIR/file3
+"$XFS_IO_PROG" -f -c "fcollapse 0 $((SZ / 2))" $TESTDIR/file4
+"$XFS_IO_PROG" -f -c "fcollapse 0 $(( (BLKS - 1) * BLKSZ))" $TESTDIR/file1
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3
+
+_within_tolerance "free blocks after reflink" $FREE_BLOCKS1 $((FREE_BLOCKS0 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after fcollapsing some reflink copies" $FREE_BLOCKS2 $FREE_BLOCKS1 $MARGIN -v
+
+_within_tolerance "free blocks after fcollapsing all copies" $FREE_BLOCKS3 $FREE_BLOCKS0 $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/833.out b/tests/generic/833.out
new file mode 100644
index 0000000..a9a2941
--- /dev/null
+++ b/tests/generic/833.out
@@ -0,0 +1,8 @@
+QA output created by 833
+Create the original file blocks
+Create the reflink copies
+Collapse most of the blocks
+Collpase nearly all the files
+free blocks after reflink is in range
+free blocks after fcollapsing some reflink copies is in range
+free blocks after fcollapsing all copies is in range
diff --git a/tests/generic/834 b/tests/generic/834
new file mode 100755
index 0000000..d24dfa5
--- /dev/null
+++ b/tests/generic/834
@@ -0,0 +1,110 @@
+#! /bin/bash
+# FS QA Test No. 834
+#
+# Ensure that CoW on all copies of a file reflinked N times increases block count
+# - Record fs block usage (0)
+# - Create a file and some reflink copies
+# - Record fs block usage (1)
+# - CoW some blocks of the copies
+# - Record fs block usage (2)
+# - CoW all the rest of the blocks of the copies
+# - Compare fs block usage to (2), (1), and (0)
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+BLKS=2000
+MARGIN=100
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+NR=4
+SZ=$((BLKS * BLKSZ))
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Rewrite some of the blocks"
+_pwrite_byte 0x62 0 $SZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x63 0 $((SZ / 2)) "$TESTDIR/file3" >> "$seqres.full"
+_pwrite_byte 0x64 $((SZ / 2)) $((SZ / 2)) "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Rewrite all the files"
+_pwrite_byte 0x62 0 $SZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x63 0 $SZ "$TESTDIR/file3" >> "$seqres.full"
+_pwrite_byte 0x64 0 $SZ "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Rewrite the original file"
+_pwrite_byte 0x65 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS4=$(stat -f "$TESTDIR" -c '%f')
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3 $FREE_BLOCKS4
+
+_within_tolerance "free blocks after reflinking" $FREE_BLOCKS1 $((FREE_BLOCKS0 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after partially CoWing some copies" $FREE_BLOCKS2 $((FREE_BLOCKS1 - (2 * BLKS))) $MARGIN -v
+
+_within_tolerance "free blocks after CoWing all copies" $FREE_BLOCKS3 $((FREE_BLOCKS2 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after overwriting original" $FREE_BLOCKS4 $FREE_BLOCKS3 $MARGIN -v
+
+_within_tolerance "free blocks after all tests" $FREE_BLOCKS4 $((FREE_BLOCKS0 - (4 * BLKS))) $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/834.out b/tests/generic/834.out
new file mode 100644
index 0000000..e67e803
--- /dev/null
+++ b/tests/generic/834.out
@@ -0,0 +1,11 @@
+QA output created by 834
+Create the original file blocks
+Create the reflink copies
+Rewrite some of the blocks
+Rewrite all the files
+Rewrite the original file
+free blocks after reflinking is in range
+free blocks after partially CoWing some copies is in range
+free blocks after CoWing all copies is in range
+free blocks after overwriting original is in range
+free blocks after all tests is in range
diff --git a/tests/generic/835 b/tests/generic/835
new file mode 100755
index 0000000..881063b
--- /dev/null
+++ b/tests/generic/835
@@ -0,0 +1,114 @@
+#! /bin/bash
+# FS QA Test No. 835
+#
+# Ensure that CoW on all copies of a file reflinked N times increases block count
+# - Record fs block usage (0)
+# - Create a file and some reflink copies
+# - Record fs block usage (1)
+# - CoW some blocks of the copies
+# - Record fs block usage (2)
+# - CoW all the rest of the blocks of the copies
+# - Compare fs block usage to (2), (1), and (0)
+#
+# The main difference from 834 is that we use zero range, directio, and
+# mmap to mix things up a bit.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fzero"
+
+rm -f "$seqres.full"
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+BLKS=2000
+MARGIN=100
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+NR=4
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Rewrite some of the blocks"
+"$XFS_IO_PROG" -f -c "fzero 0 $SZ" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x63 0 $((SZ / 2)) "$TESTDIR/file3" -d >> "$seqres.full"
+_mwrite_byte 0x64 $((SZ / 2)) $((SZ / 2)) $SZ "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Rewrite all the files"
+_pwrite_byte 0x62 0 $SZ "$TESTDIR/file2" -d >> "$seqres.full"
+_mwrite_byte 0x63 0 $SZ $SZ "$TESTDIR/file3" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "fzero 0 $SZ" $TESTDIR/file4 >> "$seqres.full"
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Rewrite the original file"
+_pwrite_byte 0x65 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS4=$(stat -f "$TESTDIR" -c '%f')
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3 $FREE_BLOCKS4
+
+_within_tolerance "free blocks after reflinking" $FREE_BLOCKS1 $((FREE_BLOCKS0 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after partially CoWing some copies" $FREE_BLOCKS2 $((FREE_BLOCKS1 - (2 * BLKS))) $MARGIN -v
+
+_within_tolerance "free blocks after CoWing all copies" $FREE_BLOCKS3 $((FREE_BLOCKS2 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after overwriting original" $FREE_BLOCKS4 $FREE_BLOCKS3 $MARGIN -v
+
+_within_tolerance "free blocks after all tests" $FREE_BLOCKS4 $((FREE_BLOCKS0 - (4 * BLKS))) $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/835.out b/tests/generic/835.out
new file mode 100644
index 0000000..c1103be
--- /dev/null
+++ b/tests/generic/835.out
@@ -0,0 +1,11 @@
+QA output created by 835
+Create the original file blocks
+Create the reflink copies
+Rewrite some of the blocks
+Rewrite all the files
+Rewrite the original file
+free blocks after reflinking is in range
+free blocks after partially CoWing some copies is in range
+free blocks after CoWing all copies is in range
+free blocks after overwriting original is in range
+free blocks after all tests is in range
diff --git a/tests/generic/836 b/tests/generic/836
new file mode 100755
index 0000000..2e0639f
--- /dev/null
+++ b/tests/generic/836
@@ -0,0 +1,129 @@
+#! /bin/bash
+# FS QA Test No. 836
+#
+# Ensure that fallocate on reflinked files actually CoWs the shared blocks.
+# - Record fs block usage (0)
+# - Create a file and some reflink copies
+# - Record fs block usage (1)
+# - funshare half of one of the copies
+# - Record fs block usage (2)
+# - funshare all of the copies
+# - Record fs block usage (3)
+# - rewrite the original file
+# - Record fs block usage (4)
+# - Compare fs block usage of 0-4 to ensure that block usage behaves as
+# we expect.
+#
+# "funshare" refers to fallocate copy-on-writing the shared blocks
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+if [ $FSTYP = "btrfs" ]; then
+ _notrun "btrfs doesn't handle unshare on fallocate"
+fi
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "falloc"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+BLKS=2000
+MARGIN=100
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+NR=4
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+lsattr -l $TESTDIR/ | _filter_test_dir
+
+echo "funshare part of a file"
+"$XFS_IO_PROG" -f -c "falloc 0 $((SZ / 2))" "$TESTDIR/file2"
+_test_remount
+lsattr -l $TESTDIR/ | _filter_test_dir
+
+echo "funshare some of the copies"
+"$XFS_IO_PROG" -f -c "falloc 0 $SZ" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "falloc 0 $SZ" "$TESTDIR/file3"
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+lsattr -l $TESTDIR/ | _filter_test_dir
+
+echo "funshare the rest of the files"
+"$XFS_IO_PROG" -f -c "falloc 0 $SZ" "$TESTDIR/file4"
+"$XFS_IO_PROG" -f -c "falloc 0 $SZ" "$TESTDIR/file1"
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+lsattr -l $TESTDIR/ | _filter_test_dir
+
+echo "Rewrite the original file"
+_pwrite_byte 0x65 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS4=$(stat -f "$TESTDIR" -c '%f')
+lsattr -l $TESTDIR/ | _filter_test_dir
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3 $FREE_BLOCKS4
+
+_within_tolerance "free blocks after reflinking" $FREE_BLOCKS1 $((FREE_BLOCKS0 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after nocow'ing some copies" $FREE_BLOCKS2 $((FREE_BLOCKS1 - (2 * BLKS))) $MARGIN -v
+
+_within_tolerance "free blocks after nocow'ing all copies" $FREE_BLOCKS3 $((FREE_BLOCKS2 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after overwriting original" $FREE_BLOCKS4 $FREE_BLOCKS3 $MARGIN -v
+
+_within_tolerance "free blocks after all tests" $FREE_BLOCKS4 $((FREE_BLOCKS0 - (4 * BLKS))) $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/836.out b/tests/generic/836.out
new file mode 100644
index 0000000..45f7750
--- /dev/null
+++ b/tests/generic/836.out
@@ -0,0 +1,32 @@
+QA output created by 836
+Create the original file blocks
+Create the reflink copies
+TEST_DIR/test-836/file1 ---
+TEST_DIR/test-836/file2 ---
+TEST_DIR/test-836/file3 ---
+TEST_DIR/test-836/file4 ---
+funshare part of a file
+TEST_DIR/test-836/file1 ---
+TEST_DIR/test-836/file2 ---
+TEST_DIR/test-836/file3 ---
+TEST_DIR/test-836/file4 ---
+funshare some of the copies
+TEST_DIR/test-836/file1 ---
+TEST_DIR/test-836/file2 No_COW
+TEST_DIR/test-836/file3 No_COW
+TEST_DIR/test-836/file4 ---
+funshare the rest of the files
+TEST_DIR/test-836/file1 No_COW
+TEST_DIR/test-836/file2 No_COW
+TEST_DIR/test-836/file3 No_COW
+TEST_DIR/test-836/file4 No_COW
+Rewrite the original file
+TEST_DIR/test-836/file1 No_COW
+TEST_DIR/test-836/file2 No_COW
+TEST_DIR/test-836/file3 No_COW
+TEST_DIR/test-836/file4 No_COW
+free blocks after reflinking is in range
+free blocks after nocow'ing some copies is in range
+free blocks after nocow'ing all copies is in range
+free blocks after overwriting original is in range
+free blocks after all tests is in range
diff --git a/tests/generic/group b/tests/generic/group
index 0c137ea..9b57872 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -237,5 +237,12 @@
827 auto quick clone
828 auto quick clone
829 auto quick clone
+830 auto quick clone
+831 auto quick clone
+832 auto quick clone
+833 auto quick clone
+834 auto quick clone
+835 auto quick clone
+836 auto quick clone
837 auto quick clone
838 auto quick clone
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH 07/11] reflink: test accuracy of free block counts
@ 2015-11-11 19:27 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Check that the free block counts seem to be handled correctly in
the reflink operation and subsequent attempts to rewrite reflinked
copies.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/830 | 78 ++++++++++++++++++++++++++++++
tests/generic/830.out | 4 ++
tests/generic/831 | 98 +++++++++++++++++++++++++++++++++++++
tests/generic/831.out | 8 +++
tests/generic/832 | 103 +++++++++++++++++++++++++++++++++++++++
tests/generic/832.out | 8 +++
tests/generic/833 | 102 +++++++++++++++++++++++++++++++++++++++
tests/generic/833.out | 8 +++
tests/generic/834 | 110 ++++++++++++++++++++++++++++++++++++++++++
tests/generic/834.out | 11 ++++
tests/generic/835 | 114 +++++++++++++++++++++++++++++++++++++++++++
tests/generic/835.out | 11 ++++
tests/generic/836 | 129 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/836.out | 32 ++++++++++++
tests/generic/group | 7 +++
15 files changed, 823 insertions(+)
create mode 100755 tests/generic/830
create mode 100644 tests/generic/830.out
create mode 100755 tests/generic/831
create mode 100644 tests/generic/831.out
create mode 100755 tests/generic/832
create mode 100644 tests/generic/832.out
create mode 100755 tests/generic/833
create mode 100644 tests/generic/833.out
create mode 100755 tests/generic/834
create mode 100644 tests/generic/834.out
create mode 100755 tests/generic/835
create mode 100644 tests/generic/835.out
create mode 100755 tests/generic/836
create mode 100644 tests/generic/836.out
diff --git a/tests/generic/830 b/tests/generic/830
new file mode 100755
index 0000000..d85bacf
--- /dev/null
+++ b/tests/generic/830
@@ -0,0 +1,78 @@
+#! /bin/bash
+# FS QA Test No. 830
+#
+# Ensure that reflinking a file N times doesn't eat a lot of blocks
+# - Create a file and record fs block usage
+# - Create some reflink copies
+# - Compare fs block usage to before
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f $TESTDIR -c '%S')"
+BLKS=2000
+MARGIN=100
+SZ=$((BLKSZ * BLKS))
+NR=7
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+sync
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file.$i"
+done
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+_within_tolerance "free blocks after reflink" $FREE_BLOCKS1 $FREE_BLOCKS0 $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/830.out b/tests/generic/830.out
new file mode 100644
index 0000000..76e2f1d
--- /dev/null
+++ b/tests/generic/830.out
@@ -0,0 +1,4 @@
+QA output created by 830
+Create the original file blocks
+Create the reflink copies
+free blocks after reflink is in range
diff --git a/tests/generic/831 b/tests/generic/831
new file mode 100755
index 0000000..d729769
--- /dev/null
+++ b/tests/generic/831
@@ -0,0 +1,98 @@
+#! /bin/bash
+# FS QA Test No. 831
+#
+# Ensure that deleting all copies of a file reflinked N times releases the blocks
+# - Record fs block usage (0)
+# - Create a file and some reflink copies
+# - Record fs block usage (1)
+# - Delete some copies of the file
+# - Record fs block usage (2)
+# - Delete all copies of the file
+# - Compare fs block usage to (2), (1), and (0)
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+BLKS=2000
+MARGIN=100
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+NR=7
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+sync
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file.$i"
+done
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/survivor"
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Delete most of the files"
+rm -rf "$TESTDIR"/file*
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Delete all the files"
+rm -rf "$TESTDIR"/*
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3
+
+_within_tolerance "free blocks after reflink" $FREE_BLOCKS1 $((FREE_BLOCKS0 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after deleting some reflink copies" $FREE_BLOCKS2 $FREE_BLOCKS1 $MARGIN -v
+
+_within_tolerance "free blocks after deleting all copies" $FREE_BLOCKS3 $FREE_BLOCKS0 $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/831.out b/tests/generic/831.out
new file mode 100644
index 0000000..88e0a23
--- /dev/null
+++ b/tests/generic/831.out
@@ -0,0 +1,8 @@
+QA output created by 831
+Create the original file blocks
+Create the reflink copies
+Delete most of the files
+Delete all the files
+free blocks after reflink is in range
+free blocks after deleting some reflink copies is in range
+free blocks after deleting all copies is in range
diff --git a/tests/generic/832 b/tests/generic/832
new file mode 100755
index 0000000..4f12b77
--- /dev/null
+++ b/tests/generic/832
@@ -0,0 +1,103 @@
+#! /bin/bash
+# FS QA Test No. 832
+#
+# Ensure that punching all copies of a file reflinked N times releases the blocks
+# - Record fs block usage (0)
+# - Create a file and some reflink copies
+# - Record fs block usage (1)
+# - Punch some blocks of the copies
+# - Record fs block usage (2)
+# - Punch all blocks of the copies
+# - Compare fs block usage to (2), (1), and (0)
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fpunch"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+BLKS=2000
+MARGIN=100
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+NR=4
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+sync
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Punch most of the blocks"
+"$XFS_IO_PROG" -f -c "fpunch 0 $SZ" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "fpunch 0 $((SZ / 2))" "$TESTDIR/file3"
+"$XFS_IO_PROG" -f -c "fpunch $((SZ / 2)) $((SZ / 2))" "$TESTDIR/file4"
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Punch all the files"
+for i in `seq 2 $NR`; do
+ "$XFS_IO_PROG" -f -c "fpunch 0 $SZ" "$TESTDIR/file$i"
+done
+"$XFS_IO_PROG" -f -c "fpunch 0 $SZ" "$TESTDIR/file1"
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3
+
+_within_tolerance "free blocks after reflink" $FREE_BLOCKS1 $((FREE_BLOCKS0 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after punching some reflink copies" $FREE_BLOCKS2 $FREE_BLOCKS1 $MARGIN -v
+
+_within_tolerance "free blocks after punching all copies" $FREE_BLOCKS3 $FREE_BLOCKS0 $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/832.out b/tests/generic/832.out
new file mode 100644
index 0000000..bb95578
--- /dev/null
+++ b/tests/generic/832.out
@@ -0,0 +1,8 @@
+QA output created by 832
+Create the original file blocks
+Create the reflink copies
+Punch most of the blocks
+Punch all the files
+free blocks after reflink is in range
+free blocks after punching some reflink copies is in range
+free blocks after punching all copies is in range
diff --git a/tests/generic/833 b/tests/generic/833
new file mode 100755
index 0000000..07dfabf
--- /dev/null
+++ b/tests/generic/833
@@ -0,0 +1,102 @@
+#! /bin/bash
+# FS QA Test No. 833
+#
+# Ensure that collapse-range on all copies of a file reflinked N times releases the blocks
+# - Record fs block usage (0)
+# - Create a file and some reflink copies
+# - Record fs block usage (1)
+# - Collapse-range some blocks of the copies
+# - Record fs block usage (2)
+# - Truncate all blocks of the copies
+# - Compare fs block usage to (2), (1), and (0)
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fcollapse"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+BLKS=2000
+MARGIN=100
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+NR=4
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Collapse most of the blocks"
+"$XFS_IO_PROG" -f -c "fcollapse 0 $(((BLKS - 1) * BLKSZ))" $TESTDIR/file2
+"$XFS_IO_PROG" -f -c "fcollapse 0 $((SZ / 2))" $TESTDIR/file3
+"$XFS_IO_PROG" -f -c "fcollapse $((SZ / 2)) $(( ((BLKS / 2) - 1) * BLKSZ))" $TESTDIR/file4
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Collpase nearly all the files"
+"$XFS_IO_PROG" -f -c "fcollapse 0 $(( ((BLKS / 2) - 1) * BLKSZ))" $TESTDIR/file3
+"$XFS_IO_PROG" -f -c "fcollapse 0 $((SZ / 2))" $TESTDIR/file4
+"$XFS_IO_PROG" -f -c "fcollapse 0 $(( (BLKS - 1) * BLKSZ))" $TESTDIR/file1
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3
+
+_within_tolerance "free blocks after reflink" $FREE_BLOCKS1 $((FREE_BLOCKS0 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after fcollapsing some reflink copies" $FREE_BLOCKS2 $FREE_BLOCKS1 $MARGIN -v
+
+_within_tolerance "free blocks after fcollapsing all copies" $FREE_BLOCKS3 $FREE_BLOCKS0 $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/833.out b/tests/generic/833.out
new file mode 100644
index 0000000..a9a2941
--- /dev/null
+++ b/tests/generic/833.out
@@ -0,0 +1,8 @@
+QA output created by 833
+Create the original file blocks
+Create the reflink copies
+Collapse most of the blocks
+Collpase nearly all the files
+free blocks after reflink is in range
+free blocks after fcollapsing some reflink copies is in range
+free blocks after fcollapsing all copies is in range
diff --git a/tests/generic/834 b/tests/generic/834
new file mode 100755
index 0000000..d24dfa5
--- /dev/null
+++ b/tests/generic/834
@@ -0,0 +1,110 @@
+#! /bin/bash
+# FS QA Test No. 834
+#
+# Ensure that CoW on all copies of a file reflinked N times increases block count
+# - Record fs block usage (0)
+# - Create a file and some reflink copies
+# - Record fs block usage (1)
+# - CoW some blocks of the copies
+# - Record fs block usage (2)
+# - CoW all the rest of the blocks of the copies
+# - Compare fs block usage to (2), (1), and (0)
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+BLKS=2000
+MARGIN=100
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+NR=4
+SZ=$((BLKS * BLKSZ))
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Rewrite some of the blocks"
+_pwrite_byte 0x62 0 $SZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x63 0 $((SZ / 2)) "$TESTDIR/file3" >> "$seqres.full"
+_pwrite_byte 0x64 $((SZ / 2)) $((SZ / 2)) "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Rewrite all the files"
+_pwrite_byte 0x62 0 $SZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x63 0 $SZ "$TESTDIR/file3" >> "$seqres.full"
+_pwrite_byte 0x64 0 $SZ "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Rewrite the original file"
+_pwrite_byte 0x65 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS4=$(stat -f "$TESTDIR" -c '%f')
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3 $FREE_BLOCKS4
+
+_within_tolerance "free blocks after reflinking" $FREE_BLOCKS1 $((FREE_BLOCKS0 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after partially CoWing some copies" $FREE_BLOCKS2 $((FREE_BLOCKS1 - (2 * BLKS))) $MARGIN -v
+
+_within_tolerance "free blocks after CoWing all copies" $FREE_BLOCKS3 $((FREE_BLOCKS2 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after overwriting original" $FREE_BLOCKS4 $FREE_BLOCKS3 $MARGIN -v
+
+_within_tolerance "free blocks after all tests" $FREE_BLOCKS4 $((FREE_BLOCKS0 - (4 * BLKS))) $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/834.out b/tests/generic/834.out
new file mode 100644
index 0000000..e67e803
--- /dev/null
+++ b/tests/generic/834.out
@@ -0,0 +1,11 @@
+QA output created by 834
+Create the original file blocks
+Create the reflink copies
+Rewrite some of the blocks
+Rewrite all the files
+Rewrite the original file
+free blocks after reflinking is in range
+free blocks after partially CoWing some copies is in range
+free blocks after CoWing all copies is in range
+free blocks after overwriting original is in range
+free blocks after all tests is in range
diff --git a/tests/generic/835 b/tests/generic/835
new file mode 100755
index 0000000..881063b
--- /dev/null
+++ b/tests/generic/835
@@ -0,0 +1,114 @@
+#! /bin/bash
+# FS QA Test No. 835
+#
+# Ensure that CoW on all copies of a file reflinked N times increases block count
+# - Record fs block usage (0)
+# - Create a file and some reflink copies
+# - Record fs block usage (1)
+# - CoW some blocks of the copies
+# - Record fs block usage (2)
+# - CoW all the rest of the blocks of the copies
+# - Compare fs block usage to (2), (1), and (0)
+#
+# The main difference from 834 is that we use zero range, directio, and
+# mmap to mix things up a bit.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fzero"
+
+rm -f "$seqres.full"
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+BLKS=2000
+MARGIN=100
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+NR=4
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Rewrite some of the blocks"
+"$XFS_IO_PROG" -f -c "fzero 0 $SZ" "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x63 0 $((SZ / 2)) "$TESTDIR/file3" -d >> "$seqres.full"
+_mwrite_byte 0x64 $((SZ / 2)) $((SZ / 2)) $SZ "$TESTDIR/file4" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Rewrite all the files"
+_pwrite_byte 0x62 0 $SZ "$TESTDIR/file2" -d >> "$seqres.full"
+_mwrite_byte 0x63 0 $SZ $SZ "$TESTDIR/file3" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "fzero 0 $SZ" $TESTDIR/file4 >> "$seqres.full"
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Rewrite the original file"
+_pwrite_byte 0x65 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS4=$(stat -f "$TESTDIR" -c '%f')
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3 $FREE_BLOCKS4
+
+_within_tolerance "free blocks after reflinking" $FREE_BLOCKS1 $((FREE_BLOCKS0 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after partially CoWing some copies" $FREE_BLOCKS2 $((FREE_BLOCKS1 - (2 * BLKS))) $MARGIN -v
+
+_within_tolerance "free blocks after CoWing all copies" $FREE_BLOCKS3 $((FREE_BLOCKS2 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after overwriting original" $FREE_BLOCKS4 $FREE_BLOCKS3 $MARGIN -v
+
+_within_tolerance "free blocks after all tests" $FREE_BLOCKS4 $((FREE_BLOCKS0 - (4 * BLKS))) $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/835.out b/tests/generic/835.out
new file mode 100644
index 0000000..c1103be
--- /dev/null
+++ b/tests/generic/835.out
@@ -0,0 +1,11 @@
+QA output created by 835
+Create the original file blocks
+Create the reflink copies
+Rewrite some of the blocks
+Rewrite all the files
+Rewrite the original file
+free blocks after reflinking is in range
+free blocks after partially CoWing some copies is in range
+free blocks after CoWing all copies is in range
+free blocks after overwriting original is in range
+free blocks after all tests is in range
diff --git a/tests/generic/836 b/tests/generic/836
new file mode 100755
index 0000000..2e0639f
--- /dev/null
+++ b/tests/generic/836
@@ -0,0 +1,129 @@
+#! /bin/bash
+# FS QA Test No. 836
+#
+# Ensure that fallocate on reflinked files actually CoWs the shared blocks.
+# - Record fs block usage (0)
+# - Create a file and some reflink copies
+# - Record fs block usage (1)
+# - funshare half of one of the copies
+# - Record fs block usage (2)
+# - funshare all of the copies
+# - Record fs block usage (3)
+# - rewrite the original file
+# - Record fs block usage (4)
+# - Compare fs block usage of 0-4 to ensure that block usage behaves as
+# we expect.
+#
+# "funshare" refers to fallocate copy-on-writing the shared blocks
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+if [ $FSTYP = "btrfs" ]; then
+ _notrun "btrfs doesn't handle unshare on fallocate"
+fi
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "falloc"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+BLKS=2000
+MARGIN=100
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+NR=4
+_pwrite_byte 0x61 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+
+echo "Create the reflink copies"
+for i in `seq 2 $NR`; do
+ _cp_reflink "$TESTDIR/file1" "$TESTDIR/file$i"
+done
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+lsattr -l $TESTDIR/ | _filter_test_dir
+
+echo "funshare part of a file"
+"$XFS_IO_PROG" -f -c "falloc 0 $((SZ / 2))" "$TESTDIR/file2"
+_test_remount
+lsattr -l $TESTDIR/ | _filter_test_dir
+
+echo "funshare some of the copies"
+"$XFS_IO_PROG" -f -c "falloc 0 $SZ" "$TESTDIR/file2"
+"$XFS_IO_PROG" -f -c "falloc 0 $SZ" "$TESTDIR/file3"
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+lsattr -l $TESTDIR/ | _filter_test_dir
+
+echo "funshare the rest of the files"
+"$XFS_IO_PROG" -f -c "falloc 0 $SZ" "$TESTDIR/file4"
+"$XFS_IO_PROG" -f -c "falloc 0 $SZ" "$TESTDIR/file1"
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+lsattr -l $TESTDIR/ | _filter_test_dir
+
+echo "Rewrite the original file"
+_pwrite_byte 0x65 0 $SZ "$TESTDIR/file1" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS4=$(stat -f "$TESTDIR" -c '%f')
+lsattr -l $TESTDIR/ | _filter_test_dir
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3 $FREE_BLOCKS4
+
+_within_tolerance "free blocks after reflinking" $FREE_BLOCKS1 $((FREE_BLOCKS0 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after nocow'ing some copies" $FREE_BLOCKS2 $((FREE_BLOCKS1 - (2 * BLKS))) $MARGIN -v
+
+_within_tolerance "free blocks after nocow'ing all copies" $FREE_BLOCKS3 $((FREE_BLOCKS2 - BLKS)) $MARGIN -v
+
+_within_tolerance "free blocks after overwriting original" $FREE_BLOCKS4 $FREE_BLOCKS3 $MARGIN -v
+
+_within_tolerance "free blocks after all tests" $FREE_BLOCKS4 $((FREE_BLOCKS0 - (4 * BLKS))) $MARGIN -v
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/836.out b/tests/generic/836.out
new file mode 100644
index 0000000..45f7750
--- /dev/null
+++ b/tests/generic/836.out
@@ -0,0 +1,32 @@
+QA output created by 836
+Create the original file blocks
+Create the reflink copies
+TEST_DIR/test-836/file1 ---
+TEST_DIR/test-836/file2 ---
+TEST_DIR/test-836/file3 ---
+TEST_DIR/test-836/file4 ---
+funshare part of a file
+TEST_DIR/test-836/file1 ---
+TEST_DIR/test-836/file2 ---
+TEST_DIR/test-836/file3 ---
+TEST_DIR/test-836/file4 ---
+funshare some of the copies
+TEST_DIR/test-836/file1 ---
+TEST_DIR/test-836/file2 No_COW
+TEST_DIR/test-836/file3 No_COW
+TEST_DIR/test-836/file4 ---
+funshare the rest of the files
+TEST_DIR/test-836/file1 No_COW
+TEST_DIR/test-836/file2 No_COW
+TEST_DIR/test-836/file3 No_COW
+TEST_DIR/test-836/file4 No_COW
+Rewrite the original file
+TEST_DIR/test-836/file1 No_COW
+TEST_DIR/test-836/file2 No_COW
+TEST_DIR/test-836/file3 No_COW
+TEST_DIR/test-836/file4 No_COW
+free blocks after reflinking is in range
+free blocks after nocow'ing some copies is in range
+free blocks after nocow'ing all copies is in range
+free blocks after overwriting original is in range
+free blocks after all tests is in range
diff --git a/tests/generic/group b/tests/generic/group
index 0c137ea..9b57872 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -237,5 +237,12 @@
827 auto quick clone
828 auto quick clone
829 auto quick clone
+830 auto quick clone
+831 auto quick clone
+832 auto quick clone
+833 auto quick clone
+834 auto quick clone
+835 auto quick clone
+836 auto quick clone
837 auto quick clone
838 auto quick clone
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 08/11] reflink: test error conditions due to bad inputs
2015-11-11 19:26 ` Darrick J. Wong
@ 2015-11-11 19:27 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Check that we can feed bad inputs to reflink and it'll reject them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/839 | 106 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/839.out | 19 +++++++++
tests/generic/846 | 106 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/846.out | 19 +++++++++
tests/generic/group | 2 +
5 files changed, 252 insertions(+)
create mode 100755 tests/generic/839
create mode 100644 tests/generic/839.out
create mode 100755 tests/generic/846
create mode 100644 tests/generic/846.out
diff --git a/tests/generic/839 b/tests/generic/839
new file mode 100755
index 0000000..0b754b1
--- /dev/null
+++ b/tests/generic/839
@@ -0,0 +1,106 @@
+#! /bin/bash
+# FS QA Test No. 839
+#
+# Check that various invalid reflink scenarios are rejected
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_scratch_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR1="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR1"
+mkdir "$TESTDIR1"
+
+TESTDIR2=$SCRATCH_MNT/test-$seq
+rm -rf "$TESTDIR2"
+mkdir "$TESTDIR2"
+
+echo "Create the original files"
+BLKSZ="$(stat -f $TESTDIR1 -c '%S')"
+BLKS=1000
+MARGIN=50
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f $TESTDIR1 -c '%f')
+NR=4
+_pwrite_byte 0x61 0 $SZ "$TESTDIR1/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $SZ "$TESTDIR1/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $SZ "$TESTDIR2/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $SZ "$TESTDIR2/file2" >> "$seqres.full"
+sync
+
+echo "Try cross-device reflink"
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR2/file1" 0 $BLKSZ
+
+echo "Try unaligned reflink"
+_reflink_range "$TESTDIR1/file1" 37 "$TESTDIR1/file1" 59 23
+
+echo "Try overlapping reflink"
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/file1" 1 $((BLKSZ * 2))
+
+echo "Try reflink past EOF"
+_reflink_range "$TESTDIR1/file1" $(( (BLKS + 10) * BLKSZ)) "$TESTDIR1/file1" 0 $BLKSZ
+
+chattr +i $TESTDIR1/file1 $TESTDIR1/file2
+echo "Try reflink on immutable files"
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/file2" 0 $BLKSZ 2>&1 | _filter_test_dir
+chattr -i $TESTDIR1/file1 $TESTDIR1/file2
+
+echo "Reflink two files"
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/file2" 0 $BLKSZ >> "$seqres.full"
+_reflink_range "$TESTDIR2/file1" 0 "$TESTDIR2/file2" 0 $BLKSZ >> "$seqres.full"
+
+lsattr -l $TESTDIR1/ | _filter_test_dir
+lsattr -l $TESTDIR2/ | _filter_scratch
+
+echo "Check scratch fs"
+umount $SCRATCH_MNT
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/839.out b/tests/generic/839.out
new file mode 100644
index 0000000..d8703b1
--- /dev/null
+++ b/tests/generic/839.out
@@ -0,0 +1,19 @@
+QA output created by 839
+Format and mount
+Create the original files
+Try cross-device reflink
+XFS_IOC_CLONE_RANGE: Invalid cross-device link
+Try unaligned reflink
+XFS_IOC_CLONE_RANGE: Invalid argument
+Try overlapping reflink
+XFS_IOC_CLONE_RANGE: Invalid argument
+Try reflink past EOF
+XFS_IOC_CLONE_RANGE: Invalid argument
+Try reflink on immutable files
+TEST_DIR/test-839/file2: Permission denied
+Reflink two files
+TEST_DIR/test-839/file1 ---
+TEST_DIR/test-839/file2 ---
+SCRATCH_MNT/test-839/file1 ---
+SCRATCH_MNT/test-839/file2 ---
+Check scratch fs
diff --git a/tests/generic/846 b/tests/generic/846
new file mode 100755
index 0000000..e425fbd
--- /dev/null
+++ b/tests/generic/846
@@ -0,0 +1,106 @@
+#! /bin/bash
+# FS QA Test No. 839
+#
+# Check that various invalid dedupe scenarios are rejected
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_dedupe
+_require_scratch_dedupe
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR1="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR1"
+mkdir "$TESTDIR1"
+
+TESTDIR2=$SCRATCH_MNT/test-$seq
+rm -rf "$TESTDIR2"
+mkdir "$TESTDIR2"
+
+echo "Create the original files"
+BLKSZ="$(stat -f $TESTDIR1 -c '%S')"
+BLKS=1000
+MARGIN=50
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f $TESTDIR1 -c '%f')
+NR=4
+_pwrite_byte 0x61 0 $SZ "$TESTDIR1/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $SZ "$TESTDIR1/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $SZ "$TESTDIR2/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $SZ "$TESTDIR2/file2" >> "$seqres.full"
+sync
+
+echo "Try cross-device dedupe"
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR2/file1" 0 $BLKSZ
+
+echo "Try unaligned dedupe"
+_dedupe_range "$TESTDIR1/file1" 37 "$TESTDIR1/file1" 59 23
+
+echo "Try overlapping dedupe"
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/file1" 1 $((BLKSZ * 2))
+
+echo "Try dedupe past EOF"
+_dedupe_range "$TESTDIR1/file1" $(( (BLKS + 10) * BLKSZ)) "$TESTDIR1/file1" 0 $BLKSZ
+
+chattr +i $TESTDIR1/file1 $TESTDIR1/file2
+echo "Try dedupe on immutable files"
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/file2" 0 $BLKSZ 2>&1 | _filter_test_dir
+chattr -i $TESTDIR1/file1 $TESTDIR1/file2
+
+echo "Dedupe two files"
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/file2" 0 $BLKSZ >> "$seqres.full"
+_dedupe_range "$TESTDIR2/file1" 0 "$TESTDIR2/file2" 0 $BLKSZ >> "$seqres.full"
+
+lsattr -l $TESTDIR1/ | _filter_test_dir
+lsattr -l $TESTDIR2/ | _filter_scratch
+
+echo "Check scratch fs"
+umount $SCRATCH_MNT
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/846.out b/tests/generic/846.out
new file mode 100644
index 0000000..65a20bf
--- /dev/null
+++ b/tests/generic/846.out
@@ -0,0 +1,19 @@
+QA output created by 846
+Format and mount
+Create the original files
+Try cross-device dedupe
+dedupe: Invalid cross-device link
+Try unaligned dedupe
+dedupe: Invalid argument
+Try overlapping dedupe
+dedupe: Invalid argument
+Try dedupe past EOF
+dedupe: Invalid argument
+Try dedupe on immutable files
+TEST_DIR/test-846/file2: Permission denied
+Dedupe two files
+TEST_DIR/test-846/file1 ---
+TEST_DIR/test-846/file2 ---
+SCRATCH_MNT/test-846/file1 ---
+SCRATCH_MNT/test-846/file2 ---
+Check scratch fs
diff --git a/tests/generic/group b/tests/generic/group
index 9b57872..90f28aa 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -246,3 +246,5 @@
836 auto quick clone
837 auto quick clone
838 auto quick clone
+839 auto quick clone
+846 auto quick clone
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH 08/11] reflink: test error conditions due to bad inputs
@ 2015-11-11 19:27 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Check that we can feed bad inputs to reflink and it'll reject them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/839 | 106 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/839.out | 19 +++++++++
tests/generic/846 | 106 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/846.out | 19 +++++++++
tests/generic/group | 2 +
5 files changed, 252 insertions(+)
create mode 100755 tests/generic/839
create mode 100644 tests/generic/839.out
create mode 100755 tests/generic/846
create mode 100644 tests/generic/846.out
diff --git a/tests/generic/839 b/tests/generic/839
new file mode 100755
index 0000000..0b754b1
--- /dev/null
+++ b/tests/generic/839
@@ -0,0 +1,106 @@
+#! /bin/bash
+# FS QA Test No. 839
+#
+# Check that various invalid reflink scenarios are rejected
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_scratch_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR1="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR1"
+mkdir "$TESTDIR1"
+
+TESTDIR2=$SCRATCH_MNT/test-$seq
+rm -rf "$TESTDIR2"
+mkdir "$TESTDIR2"
+
+echo "Create the original files"
+BLKSZ="$(stat -f $TESTDIR1 -c '%S')"
+BLKS=1000
+MARGIN=50
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f $TESTDIR1 -c '%f')
+NR=4
+_pwrite_byte 0x61 0 $SZ "$TESTDIR1/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $SZ "$TESTDIR1/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $SZ "$TESTDIR2/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $SZ "$TESTDIR2/file2" >> "$seqres.full"
+sync
+
+echo "Try cross-device reflink"
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR2/file1" 0 $BLKSZ
+
+echo "Try unaligned reflink"
+_reflink_range "$TESTDIR1/file1" 37 "$TESTDIR1/file1" 59 23
+
+echo "Try overlapping reflink"
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/file1" 1 $((BLKSZ * 2))
+
+echo "Try reflink past EOF"
+_reflink_range "$TESTDIR1/file1" $(( (BLKS + 10) * BLKSZ)) "$TESTDIR1/file1" 0 $BLKSZ
+
+chattr +i $TESTDIR1/file1 $TESTDIR1/file2
+echo "Try reflink on immutable files"
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/file2" 0 $BLKSZ 2>&1 | _filter_test_dir
+chattr -i $TESTDIR1/file1 $TESTDIR1/file2
+
+echo "Reflink two files"
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/file2" 0 $BLKSZ >> "$seqres.full"
+_reflink_range "$TESTDIR2/file1" 0 "$TESTDIR2/file2" 0 $BLKSZ >> "$seqres.full"
+
+lsattr -l $TESTDIR1/ | _filter_test_dir
+lsattr -l $TESTDIR2/ | _filter_scratch
+
+echo "Check scratch fs"
+umount $SCRATCH_MNT
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/839.out b/tests/generic/839.out
new file mode 100644
index 0000000..d8703b1
--- /dev/null
+++ b/tests/generic/839.out
@@ -0,0 +1,19 @@
+QA output created by 839
+Format and mount
+Create the original files
+Try cross-device reflink
+XFS_IOC_CLONE_RANGE: Invalid cross-device link
+Try unaligned reflink
+XFS_IOC_CLONE_RANGE: Invalid argument
+Try overlapping reflink
+XFS_IOC_CLONE_RANGE: Invalid argument
+Try reflink past EOF
+XFS_IOC_CLONE_RANGE: Invalid argument
+Try reflink on immutable files
+TEST_DIR/test-839/file2: Permission denied
+Reflink two files
+TEST_DIR/test-839/file1 ---
+TEST_DIR/test-839/file2 ---
+SCRATCH_MNT/test-839/file1 ---
+SCRATCH_MNT/test-839/file2 ---
+Check scratch fs
diff --git a/tests/generic/846 b/tests/generic/846
new file mode 100755
index 0000000..e425fbd
--- /dev/null
+++ b/tests/generic/846
@@ -0,0 +1,106 @@
+#! /bin/bash
+# FS QA Test No. 839
+#
+# Check that various invalid dedupe scenarios are rejected
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_dedupe
+_require_scratch_dedupe
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR1="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR1"
+mkdir "$TESTDIR1"
+
+TESTDIR2=$SCRATCH_MNT/test-$seq
+rm -rf "$TESTDIR2"
+mkdir "$TESTDIR2"
+
+echo "Create the original files"
+BLKSZ="$(stat -f $TESTDIR1 -c '%S')"
+BLKS=1000
+MARGIN=50
+SZ=$((BLKSZ * BLKS))
+FREE_BLOCKS0=$(stat -f $TESTDIR1 -c '%f')
+NR=4
+_pwrite_byte 0x61 0 $SZ "$TESTDIR1/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $SZ "$TESTDIR1/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $SZ "$TESTDIR2/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $SZ "$TESTDIR2/file2" >> "$seqres.full"
+sync
+
+echo "Try cross-device dedupe"
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR2/file1" 0 $BLKSZ
+
+echo "Try unaligned dedupe"
+_dedupe_range "$TESTDIR1/file1" 37 "$TESTDIR1/file1" 59 23
+
+echo "Try overlapping dedupe"
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/file1" 1 $((BLKSZ * 2))
+
+echo "Try dedupe past EOF"
+_dedupe_range "$TESTDIR1/file1" $(( (BLKS + 10) * BLKSZ)) "$TESTDIR1/file1" 0 $BLKSZ
+
+chattr +i $TESTDIR1/file1 $TESTDIR1/file2
+echo "Try dedupe on immutable files"
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/file2" 0 $BLKSZ 2>&1 | _filter_test_dir
+chattr -i $TESTDIR1/file1 $TESTDIR1/file2
+
+echo "Dedupe two files"
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/file2" 0 $BLKSZ >> "$seqres.full"
+_dedupe_range "$TESTDIR2/file1" 0 "$TESTDIR2/file2" 0 $BLKSZ >> "$seqres.full"
+
+lsattr -l $TESTDIR1/ | _filter_test_dir
+lsattr -l $TESTDIR2/ | _filter_scratch
+
+echo "Check scratch fs"
+umount $SCRATCH_MNT
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/846.out b/tests/generic/846.out
new file mode 100644
index 0000000..65a20bf
--- /dev/null
+++ b/tests/generic/846.out
@@ -0,0 +1,19 @@
+QA output created by 846
+Format and mount
+Create the original files
+Try cross-device dedupe
+dedupe: Invalid cross-device link
+Try unaligned dedupe
+dedupe: Invalid argument
+Try overlapping dedupe
+dedupe: Invalid argument
+Try dedupe past EOF
+dedupe: Invalid argument
+Try dedupe on immutable files
+TEST_DIR/test-846/file2: Permission denied
+Dedupe two files
+TEST_DIR/test-846/file1 ---
+TEST_DIR/test-846/file2 ---
+SCRATCH_MNT/test-846/file1 ---
+SCRATCH_MNT/test-846/file2 ---
+Check scratch fs
diff --git a/tests/generic/group b/tests/generic/group
index 9b57872..90f28aa 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -246,3 +246,5 @@
836 auto quick clone
837 auto quick clone
838 auto quick clone
+839 auto quick clone
+846 auto quick clone
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 09/11] xfs: test xfs-specific reflink pieces
2015-11-11 19:26 ` Darrick J. Wong
@ 2015-11-11 19:27 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Check that growfs and xfs_fsr still work properly on reflinked fses.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/xfs/800 | 79 ++++++++++++++++++++++++++++
tests/xfs/800.out | 6 ++
tests/xfs/801 | 148 +++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/801.out | 27 ++++++++++
tests/xfs/802 | 87 +++++++++++++++++++++++++++++++
tests/xfs/802.out | 6 ++
tests/xfs/803 | 109 +++++++++++++++++++++++++++++++++++++++
tests/xfs/803.out | 13 +++++
tests/xfs/804 | 77 ++++++++++++++++++++++++++++
tests/xfs/804.out | 0
tests/xfs/group | 5 ++
11 files changed, 557 insertions(+)
create mode 100755 tests/xfs/800
create mode 100644 tests/xfs/800.out
create mode 100755 tests/xfs/801
create mode 100644 tests/xfs/801.out
create mode 100755 tests/xfs/802
create mode 100644 tests/xfs/802.out
create mode 100755 tests/xfs/803
create mode 100644 tests/xfs/803.out
create mode 100755 tests/xfs/804
create mode 100644 tests/xfs/804.out
diff --git a/tests/xfs/800 b/tests/xfs/800
new file mode 100755
index 0000000..d9fe5b4
--- /dev/null
+++ b/tests/xfs/800
@@ -0,0 +1,79 @@
+#! /bin/bash
+# FS QA Test No. 800
+#
+# Tests xfs_growfs on a reflinked filesystem
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f "$tmp".*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs -d size=$((2 * 4096 * 4096)) -l size=4194304 > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file and reflink to copy1, copy2"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+_pwrite_byte 0x61 0 $((BLKSZ * 14 + 71)) "$TESTDIR/original" >> "$seqres.full"
+_cp_reflink "$TESTDIR/original" "$TESTDIR/copy1"
+_cp_reflink "$TESTDIR/copy1" "$TESTDIR/copy2"
+
+echo "Grow fs"
+"$XFS_GROWFS_PROG" "$SCRATCH_MNT" 2>&1 | _filter_growfs >> "$seqres.full"
+_scratch_remount
+
+echo "Create more reflink copies"
+_cp_reflink "$TESTDIR/original" "$TESTDIR/copy3"
+
+xfs_info "$SCRATCH_MNT" >> "$seqres.full"
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/800.out b/tests/xfs/800.out
new file mode 100644
index 0000000..73d4f71
--- /dev/null
+++ b/tests/xfs/800.out
@@ -0,0 +1,6 @@
+QA output created by 800
+Format and mount
+Create the original file and reflink to copy1, copy2
+Grow fs
+Create more reflink copies
+Check scratch fs
diff --git a/tests/xfs/801 b/tests/xfs/801
new file mode 100755
index 0000000..172fb29
--- /dev/null
+++ b/tests/xfs/801
@@ -0,0 +1,148 @@
+#! /bin/bash
+# FS QA Test No. 801
+#
+# Ensure that xfs_fsr un-reflinks files while defragmenting
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f "$tmp".*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Create the original file and reflink to file2, file3"
+BLKS=2000
+MARGIN=100
+BLKSZ=65536
+REAL_BLKSZ="$(stat -f $TESTDIR -c '%S')"
+BLKSZ_FACTOR=$((BLKSZ / REAL_BLKSZ))
+_pwrite_byte 0x61 0 $((BLKS * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_cp_reflink "$TESTDIR/file2" "$TESTDIR/file3"
+_cp_reflink "$TESTDIR/file3" "$TESTDIR/file4"
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+md5sum "$TESTDIR/file1" | _filter_scratch
+md5sum "$TESTDIR/file2" | _filter_scratch
+md5sum "$TESTDIR/file3" | _filter_scratch
+md5sum "$TESTDIR/file4" | _filter_scratch
+
+C01=$(_md5_checksum "$TESTDIR/file1")
+C02=$(_md5_checksum "$TESTDIR/file2")
+C03=$(_md5_checksum "$TESTDIR/file3")
+C04=$(_md5_checksum "$TESTDIR/file4")
+
+echo "CoW the reflink copies"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x63 $(( BLKSZ * (BLKS - 1) )) $BLKSZ "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+
+md5sum "$TESTDIR/file1" | _filter_scratch
+md5sum "$TESTDIR/file2" | _filter_scratch
+md5sum "$TESTDIR/file3" | _filter_scratch
+md5sum "$TESTDIR/file4" | _filter_scratch
+
+C11=$(_md5_checksum "$TESTDIR/file1")
+C12=$(_md5_checksum "$TESTDIR/file2")
+C13=$(_md5_checksum "$TESTDIR/file3")
+C14=$(_md5_checksum "$TESTDIR/file4")
+
+echo "Defragment"
+lsattr -l "$TESTDIR/" | _filter_scratch
+xfs_fsr -v -d "$TESTDIR/file1" >> "$seqres.full"
+xfs_fsr -v -d "$TESTDIR/file2" >> "$seqres.full" # fsr probably breaks the link
+xfs_fsr -v -d "$TESTDIR/file3" >> "$seqres.full" # fsr probably breaks the link
+xfs_fsr -v -d "$TESTDIR/file4" >> "$seqres.full" # fsr probably ignores this file
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+
+md5sum "$TESTDIR/file1" | _filter_scratch
+md5sum "$TESTDIR/file2" | _filter_scratch
+md5sum "$TESTDIR/file3" | _filter_scratch
+md5sum "$TESTDIR/file4" | _filter_scratch
+
+C21=$(_md5_checksum "$TESTDIR/file1")
+C22=$(_md5_checksum "$TESTDIR/file2")
+C23=$(_md5_checksum "$TESTDIR/file3")
+C24=$(_md5_checksum "$TESTDIR/file4")
+
+echo "Check files"
+test $C01 = $C02 || echo "Files 1-2 do not match"
+test $C01 = $C03 || echo "Files 1-3 do not match"
+test $C01 = $C04 || echo "Files 1-4 do not match"
+test $C02 = $C03 || echo "Files 2-3 do not match"
+test $C02 = $C04 || echo "Files 2-4 do not match"
+test $C03 = $C04 || echo "Files 3-4 do not match"
+
+test $C01 = $C11 || echo "File1 should not be different after CoW"
+test $C02 != $C12 || echo "File2 should be different after CoW"
+test $C03 != $C13 || echo "File3 should be different after CoW"
+test $C04 = $C14 || echo "File4 should not be different after CoW"
+
+test $C11 = $C21 || echo "File1 changed by defrag"
+test $C12 = $C22 || echo "File2 changed by defrag"
+test $C13 = $C23 || echo "File3 changed by defrag"
+test $C14 = $C24 || echo "File4 changed by defrag"
+
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3
+
+_within_tolerance "free blocks after creating some reflink copies" $FREE_BLOCKS1 $((FREE_BLOCKS0 - (BLKS * BLKSZ_FACTOR) )) $MARGIN -v
+_within_tolerance "free blocks after CoW some reflink copies" $FREE_BLOCKS2 $((FREE_BLOCKS1 - 2)) $MARGIN -v
+_within_tolerance "free blocks after defragging all reflink copies" $FREE_BLOCKS3 $((FREE_BLOCKS2 - (BLKS * 2 * BLKSZ_FACTOR))) $MARGIN -v
+_within_tolerance "free blocks after all tests" $FREE_BLOCKS3 $((FREE_BLOCKS0 - (BLKS * 3 * BLKSZ_FACTOR))) $MARGIN -v
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/801.out b/tests/xfs/801.out
new file mode 100644
index 0000000..4733f18
--- /dev/null
+++ b/tests/xfs/801.out
@@ -0,0 +1,27 @@
+QA output created by 801
+Format and mount
+Create the original file and reflink to file2, file3
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file1
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file2
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file3
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file4
+CoW the reflink copies
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file1
+c650f1cf6c9f07b22e3e21ec7d49ded5 SCRATCH_MNT/test-801/file2
+56ed2f712c91e035adeeb26ed105a982 SCRATCH_MNT/test-801/file3
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file4
+Defragment
+SCRATCH_MNT/test-801/file1 ---
+SCRATCH_MNT/test-801/file2 ---
+SCRATCH_MNT/test-801/file3 ---
+SCRATCH_MNT/test-801/file4 ---
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file1
+c650f1cf6c9f07b22e3e21ec7d49ded5 SCRATCH_MNT/test-801/file2
+56ed2f712c91e035adeeb26ed105a982 SCRATCH_MNT/test-801/file3
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file4
+Check files
+free blocks after creating some reflink copies is in range
+free blocks after CoW some reflink copies is in range
+free blocks after defragging all reflink copies is in range
+free blocks after all tests is in range
+Check scratch fs
diff --git a/tests/xfs/802 b/tests/xfs/802
new file mode 100755
index 0000000..f63ef14
--- /dev/null
+++ b/tests/xfs/802
@@ -0,0 +1,87 @@
+#! /bin/bash
+# FS QA Test No. 802
+#
+# Ensure that we can create enough distinct reflink entries to force creation
+# of a multi-level refcount btree, and that metadump will successfully copy
+# said block.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ umount "$SCRATCH_MNT" > /dev/null 2>&1
+ rm -rf "$tmp".* "$TESTDIR" "$METADUMP_FILE"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+_require_scratch_reflink
+
+rm -f "$seqres.full"
+
+_scratch_mkfs >/dev/null 2>&1
+_scratch_mount
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+METADUMP_FILE="$TEST_DIR/${seq}_metadump"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+NR_BLKS=$((4 * BLKSZ / 12))
+_pwrite_byte 0x61 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/file1" >> "$seqres.full"
+
+echo "Reflink every other block"
+seq 1 $((NR_BLKS / 2)) | while read nr; do
+ _reflink_range "$TESTDIR/file1" $((nr * 2 * BLKSZ)) \
+ "$TESTDIR/file2" $((nr * 2 * BLKSZ)) $BLKSZ >> "$seqres.full"
+done
+
+echo "Create metadump file"
+_scratch_unmount
+_scratch_metadump "$METADUMP_FILE"
+
+# Now restore the obfuscated one back and take a look around
+echo "Restore metadump"
+xfs_mdrestore "$METADUMP_FILE" "$TEST_DIR/image"
+_mount -t $FSTYP "$TEST_DIR/image" "$SCRATCH_MNT"
+umount "$SCRATCH_MNT"
+
+echo "Check restored fs"
+_check_generic_filesystem "$METADUMP_FILE"
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/802.out b/tests/xfs/802.out
new file mode 100644
index 0000000..ad2ef03
--- /dev/null
+++ b/tests/xfs/802.out
@@ -0,0 +1,6 @@
+QA output created by 802
+Create the original file blocks
+Reflink every other block
+Create metadump file
+Restore metadump
+Check restored fs
diff --git a/tests/xfs/803 b/tests/xfs/803
new file mode 100755
index 0000000..4aed2e1
--- /dev/null
+++ b/tests/xfs/803
@@ -0,0 +1,109 @@
+#! /bin/bash
+# FS QA Test No. 803
+#
+# Create and populate an XFS filesystem, corrupt the refcount btree,
+# then see how the kernel and xfs_repair deal with it.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ #rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+_require_scratch_reflink
+_require_cp_reflink
+test -n "${FORCE_FUZZ}" || _require_scratch_xfs_crc
+
+rm -f "$seqres.full"
+
+echo "+ create scratch fs"
+_scratch_mkfs_xfs > /dev/null
+
+echo "+ mount fs image"
+_scratch_mount
+blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
+agcount="$(xfs_info "${SCRATCH_MNT}" | grep agcount= | sed -e 's/^.*agcount=\([0-9]*\),.*$/\1/g')"
+
+echo "+ make some files"
+_pwrite_byte 0x62 0 $((blksz * 64)) "${SCRATCH_MNT}/file0" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((blksz * 64)) "${SCRATCH_MNT}/file1" >> "$seqres.full"
+_cp_reflink "${SCRATCH_MNT}/file0" "${SCRATCH_MNT}/file2"
+_cp_reflink "${SCRATCH_MNT}/file1" "${SCRATCH_MNT}/file3"
+umount "${SCRATCH_MNT}"
+
+echo "+ check fs"
+_scratch_xfs_repair -n >> "$seqres.full" 2>&1 || \
+ _fail "xfs_repair should not fail"
+
+echo "+ corrupt image"
+seq 0 $((agcount - 1)) | while read ag; do
+ $XFS_DB_PROG -x -c "agf ${ag}" -c "agf ${ag}" -c "addr refcntroot" \
+ -c "stack" -c "blocktrash -x 4096 -y 4096 -z -n 8 -3" \
+ "${SCRATCH_DEV}" >> "$seqres.full" 2>&1
+done
+
+echo "+ mount image"
+_scratch_mount
+
+echo "+ reflink more"
+_cp_reflink "${SCRATCH_MNT}/file1" "${SCRATCH_MNT}/file4" 2> /dev/null && \
+ _fail "should not be able to reflink with busted refcount btree"
+umount "${SCRATCH_MNT}"
+
+echo "+ repair fs"
+_scratch_xfs_repair >> "$seqres.full" 2>&1
+_scratch_xfs_repair >> "$seqres.full" 2>&1
+
+echo "+ mount image (2)"
+_scratch_mount
+
+echo "+ chattr -R -i"
+chattr -R -f -i "${SCRATCH_MNT}/"
+
+echo "+ reflink more (2)"
+_cp_reflink "${SCRATCH_MNT}/file1" "${SCRATCH_MNT}/file5" || \
+ _fail "modified refcount tree"
+umount "${SCRATCH_MNT}"
+
+echo "+ check fs (2)"
+_scratch_xfs_repair -n >> "$seqres.full" 2>&1 || \
+ _fail "xfs_repair should not fail"
+
+status=0
+exit
diff --git a/tests/xfs/803.out b/tests/xfs/803.out
new file mode 100644
index 0000000..582682d
--- /dev/null
+++ b/tests/xfs/803.out
@@ -0,0 +1,13 @@
+QA output created by 803
++ create scratch fs
++ mount fs image
++ make some files
++ check fs
++ corrupt image
++ mount image
++ reflink more
++ repair fs
++ mount image (2)
++ chattr -R -i
++ reflink more (2)
++ check fs (2)
diff --git a/tests/xfs/804 b/tests/xfs/804
new file mode 100755
index 0000000..c46a7a0
--- /dev/null
+++ b/tests/xfs/804
@@ -0,0 +1,77 @@
+#! /bin/bash
+# FS QA Test No. 804
+#
+# Ensure that we can't reflink realtime files.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ umount "$SCRATCH_MNT" > /dev/null 2>&1
+ rm -rf "$tmp".* "$TESTDIR" "$METADUMP_FILE"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+test -b "$TEST_RTDEV" || _notrun "Need TEST_RTDEV to run this test."
+_require_scratch_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+_scratch_mkfs -r rtdev=$TEST_RTDEV >/dev/null 2>&1
+_scratch_mount -o rtdev=$TEST_RTDEV
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ=65536
+touch "$TESTDIR/file1"
+$XFS_IO_PROG -c 'chattr +r' "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+
+echo "Reflink every other block"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+
+test -s "$TESTDIR/file2" && _fail "Should not be able to reflink a realtime file."
+
+echo "Check restored fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/804.out b/tests/xfs/804.out
new file mode 100644
index 0000000..e69de29
diff --git a/tests/xfs/group b/tests/xfs/group
index 8261f86..eccfb73 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -220,3 +220,8 @@
303 auto quick quota
304 auto quick quota
305 auto quota
+800 auto quick clone
+801 auto quick clone
+802 auto quick clone
+803 fuzzers
+804 auto quick clone
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH 09/11] xfs: test xfs-specific reflink pieces
@ 2015-11-11 19:27 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Check that growfs and xfs_fsr still work properly on reflinked fses.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/xfs/800 | 79 ++++++++++++++++++++++++++++
tests/xfs/800.out | 6 ++
tests/xfs/801 | 148 +++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/801.out | 27 ++++++++++
tests/xfs/802 | 87 +++++++++++++++++++++++++++++++
tests/xfs/802.out | 6 ++
tests/xfs/803 | 109 +++++++++++++++++++++++++++++++++++++++
tests/xfs/803.out | 13 +++++
tests/xfs/804 | 77 ++++++++++++++++++++++++++++
tests/xfs/804.out | 0
tests/xfs/group | 5 ++
11 files changed, 557 insertions(+)
create mode 100755 tests/xfs/800
create mode 100644 tests/xfs/800.out
create mode 100755 tests/xfs/801
create mode 100644 tests/xfs/801.out
create mode 100755 tests/xfs/802
create mode 100644 tests/xfs/802.out
create mode 100755 tests/xfs/803
create mode 100644 tests/xfs/803.out
create mode 100755 tests/xfs/804
create mode 100644 tests/xfs/804.out
diff --git a/tests/xfs/800 b/tests/xfs/800
new file mode 100755
index 0000000..d9fe5b4
--- /dev/null
+++ b/tests/xfs/800
@@ -0,0 +1,79 @@
+#! /bin/bash
+# FS QA Test No. 800
+#
+# Tests xfs_growfs on a reflinked filesystem
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f "$tmp".*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs -d size=$((2 * 4096 * 4096)) -l size=4194304 > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file and reflink to copy1, copy2"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+_pwrite_byte 0x61 0 $((BLKSZ * 14 + 71)) "$TESTDIR/original" >> "$seqres.full"
+_cp_reflink "$TESTDIR/original" "$TESTDIR/copy1"
+_cp_reflink "$TESTDIR/copy1" "$TESTDIR/copy2"
+
+echo "Grow fs"
+"$XFS_GROWFS_PROG" "$SCRATCH_MNT" 2>&1 | _filter_growfs >> "$seqres.full"
+_scratch_remount
+
+echo "Create more reflink copies"
+_cp_reflink "$TESTDIR/original" "$TESTDIR/copy3"
+
+xfs_info "$SCRATCH_MNT" >> "$seqres.full"
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/800.out b/tests/xfs/800.out
new file mode 100644
index 0000000..73d4f71
--- /dev/null
+++ b/tests/xfs/800.out
@@ -0,0 +1,6 @@
+QA output created by 800
+Format and mount
+Create the original file and reflink to copy1, copy2
+Grow fs
+Create more reflink copies
+Check scratch fs
diff --git a/tests/xfs/801 b/tests/xfs/801
new file mode 100755
index 0000000..172fb29
--- /dev/null
+++ b/tests/xfs/801
@@ -0,0 +1,148 @@
+#! /bin/bash
+# FS QA Test No. 801
+#
+# Ensure that xfs_fsr un-reflinks files while defragmenting
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f "$tmp".*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+_require_scratch_reflink
+_require_cp_reflink
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+FREE_BLOCKS0=$(stat -f "$TESTDIR" -c '%f')
+
+echo "Create the original file and reflink to file2, file3"
+BLKS=2000
+MARGIN=100
+BLKSZ=65536
+REAL_BLKSZ="$(stat -f $TESTDIR -c '%S')"
+BLKSZ_FACTOR=$((BLKSZ / REAL_BLKSZ))
+_pwrite_byte 0x61 0 $((BLKS * BLKSZ)) "$TESTDIR/file1" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_cp_reflink "$TESTDIR/file2" "$TESTDIR/file3"
+_cp_reflink "$TESTDIR/file3" "$TESTDIR/file4"
+_test_remount
+FREE_BLOCKS1=$(stat -f "$TESTDIR" -c '%f')
+
+md5sum "$TESTDIR/file1" | _filter_scratch
+md5sum "$TESTDIR/file2" | _filter_scratch
+md5sum "$TESTDIR/file3" | _filter_scratch
+md5sum "$TESTDIR/file4" | _filter_scratch
+
+C01=$(_md5_checksum "$TESTDIR/file1")
+C02=$(_md5_checksum "$TESTDIR/file2")
+C03=$(_md5_checksum "$TESTDIR/file3")
+C04=$(_md5_checksum "$TESTDIR/file4")
+
+echo "CoW the reflink copies"
+_pwrite_byte 0x62 $BLKSZ $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x63 $(( BLKSZ * (BLKS - 1) )) $BLKSZ "$TESTDIR/file3" >> "$seqres.full"
+_test_remount
+FREE_BLOCKS2=$(stat -f "$TESTDIR" -c '%f')
+
+md5sum "$TESTDIR/file1" | _filter_scratch
+md5sum "$TESTDIR/file2" | _filter_scratch
+md5sum "$TESTDIR/file3" | _filter_scratch
+md5sum "$TESTDIR/file4" | _filter_scratch
+
+C11=$(_md5_checksum "$TESTDIR/file1")
+C12=$(_md5_checksum "$TESTDIR/file2")
+C13=$(_md5_checksum "$TESTDIR/file3")
+C14=$(_md5_checksum "$TESTDIR/file4")
+
+echo "Defragment"
+lsattr -l "$TESTDIR/" | _filter_scratch
+xfs_fsr -v -d "$TESTDIR/file1" >> "$seqres.full"
+xfs_fsr -v -d "$TESTDIR/file2" >> "$seqres.full" # fsr probably breaks the link
+xfs_fsr -v -d "$TESTDIR/file3" >> "$seqres.full" # fsr probably breaks the link
+xfs_fsr -v -d "$TESTDIR/file4" >> "$seqres.full" # fsr probably ignores this file
+_test_remount
+FREE_BLOCKS3=$(stat -f "$TESTDIR" -c '%f')
+
+md5sum "$TESTDIR/file1" | _filter_scratch
+md5sum "$TESTDIR/file2" | _filter_scratch
+md5sum "$TESTDIR/file3" | _filter_scratch
+md5sum "$TESTDIR/file4" | _filter_scratch
+
+C21=$(_md5_checksum "$TESTDIR/file1")
+C22=$(_md5_checksum "$TESTDIR/file2")
+C23=$(_md5_checksum "$TESTDIR/file3")
+C24=$(_md5_checksum "$TESTDIR/file4")
+
+echo "Check files"
+test $C01 = $C02 || echo "Files 1-2 do not match"
+test $C01 = $C03 || echo "Files 1-3 do not match"
+test $C01 = $C04 || echo "Files 1-4 do not match"
+test $C02 = $C03 || echo "Files 2-3 do not match"
+test $C02 = $C04 || echo "Files 2-4 do not match"
+test $C03 = $C04 || echo "Files 3-4 do not match"
+
+test $C01 = $C11 || echo "File1 should not be different after CoW"
+test $C02 != $C12 || echo "File2 should be different after CoW"
+test $C03 != $C13 || echo "File3 should be different after CoW"
+test $C04 = $C14 || echo "File4 should not be different after CoW"
+
+test $C11 = $C21 || echo "File1 changed by defrag"
+test $C12 = $C22 || echo "File2 changed by defrag"
+test $C13 = $C23 || echo "File3 changed by defrag"
+test $C14 = $C24 || echo "File4 changed by defrag"
+
+#echo $FREE_BLOCKS0 $FREE_BLOCKS1 $FREE_BLOCKS2 $FREE_BLOCKS3
+
+_within_tolerance "free blocks after creating some reflink copies" $FREE_BLOCKS1 $((FREE_BLOCKS0 - (BLKS * BLKSZ_FACTOR) )) $MARGIN -v
+_within_tolerance "free blocks after CoW some reflink copies" $FREE_BLOCKS2 $((FREE_BLOCKS1 - 2)) $MARGIN -v
+_within_tolerance "free blocks after defragging all reflink copies" $FREE_BLOCKS3 $((FREE_BLOCKS2 - (BLKS * 2 * BLKSZ_FACTOR))) $MARGIN -v
+_within_tolerance "free blocks after all tests" $FREE_BLOCKS3 $((FREE_BLOCKS0 - (BLKS * 3 * BLKSZ_FACTOR))) $MARGIN -v
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/801.out b/tests/xfs/801.out
new file mode 100644
index 0000000..4733f18
--- /dev/null
+++ b/tests/xfs/801.out
@@ -0,0 +1,27 @@
+QA output created by 801
+Format and mount
+Create the original file and reflink to file2, file3
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file1
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file2
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file3
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file4
+CoW the reflink copies
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file1
+c650f1cf6c9f07b22e3e21ec7d49ded5 SCRATCH_MNT/test-801/file2
+56ed2f712c91e035adeeb26ed105a982 SCRATCH_MNT/test-801/file3
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file4
+Defragment
+SCRATCH_MNT/test-801/file1 ---
+SCRATCH_MNT/test-801/file2 ---
+SCRATCH_MNT/test-801/file3 ---
+SCRATCH_MNT/test-801/file4 ---
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file1
+c650f1cf6c9f07b22e3e21ec7d49ded5 SCRATCH_MNT/test-801/file2
+56ed2f712c91e035adeeb26ed105a982 SCRATCH_MNT/test-801/file3
+b81534f439aac5c34ce3ed60a03eba70 SCRATCH_MNT/test-801/file4
+Check files
+free blocks after creating some reflink copies is in range
+free blocks after CoW some reflink copies is in range
+free blocks after defragging all reflink copies is in range
+free blocks after all tests is in range
+Check scratch fs
diff --git a/tests/xfs/802 b/tests/xfs/802
new file mode 100755
index 0000000..f63ef14
--- /dev/null
+++ b/tests/xfs/802
@@ -0,0 +1,87 @@
+#! /bin/bash
+# FS QA Test No. 802
+#
+# Ensure that we can create enough distinct reflink entries to force creation
+# of a multi-level refcount btree, and that metadump will successfully copy
+# said block.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ umount "$SCRATCH_MNT" > /dev/null 2>&1
+ rm -rf "$tmp".* "$TESTDIR" "$METADUMP_FILE"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+_require_scratch_reflink
+
+rm -f "$seqres.full"
+
+_scratch_mkfs >/dev/null 2>&1
+_scratch_mount
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+METADUMP_FILE="$TEST_DIR/${seq}_metadump"
+
+echo "Create the original file blocks"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+NR_BLKS=$((4 * BLKSZ / 12))
+_pwrite_byte 0x61 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/file1" >> "$seqres.full"
+
+echo "Reflink every other block"
+seq 1 $((NR_BLKS / 2)) | while read nr; do
+ _reflink_range "$TESTDIR/file1" $((nr * 2 * BLKSZ)) \
+ "$TESTDIR/file2" $((nr * 2 * BLKSZ)) $BLKSZ >> "$seqres.full"
+done
+
+echo "Create metadump file"
+_scratch_unmount
+_scratch_metadump "$METADUMP_FILE"
+
+# Now restore the obfuscated one back and take a look around
+echo "Restore metadump"
+xfs_mdrestore "$METADUMP_FILE" "$TEST_DIR/image"
+_mount -t $FSTYP "$TEST_DIR/image" "$SCRATCH_MNT"
+umount "$SCRATCH_MNT"
+
+echo "Check restored fs"
+_check_generic_filesystem "$METADUMP_FILE"
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/802.out b/tests/xfs/802.out
new file mode 100644
index 0000000..ad2ef03
--- /dev/null
+++ b/tests/xfs/802.out
@@ -0,0 +1,6 @@
+QA output created by 802
+Create the original file blocks
+Reflink every other block
+Create metadump file
+Restore metadump
+Check restored fs
diff --git a/tests/xfs/803 b/tests/xfs/803
new file mode 100755
index 0000000..4aed2e1
--- /dev/null
+++ b/tests/xfs/803
@@ -0,0 +1,109 @@
+#! /bin/bash
+# FS QA Test No. 803
+#
+# Create and populate an XFS filesystem, corrupt the refcount btree,
+# then see how the kernel and xfs_repair deal with it.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ #rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+_require_scratch_reflink
+_require_cp_reflink
+test -n "${FORCE_FUZZ}" || _require_scratch_xfs_crc
+
+rm -f "$seqres.full"
+
+echo "+ create scratch fs"
+_scratch_mkfs_xfs > /dev/null
+
+echo "+ mount fs image"
+_scratch_mount
+blksz="$(stat -f -c '%s' "${SCRATCH_MNT}")"
+agcount="$(xfs_info "${SCRATCH_MNT}" | grep agcount= | sed -e 's/^.*agcount=\([0-9]*\),.*$/\1/g')"
+
+echo "+ make some files"
+_pwrite_byte 0x62 0 $((blksz * 64)) "${SCRATCH_MNT}/file0" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((blksz * 64)) "${SCRATCH_MNT}/file1" >> "$seqres.full"
+_cp_reflink "${SCRATCH_MNT}/file0" "${SCRATCH_MNT}/file2"
+_cp_reflink "${SCRATCH_MNT}/file1" "${SCRATCH_MNT}/file3"
+umount "${SCRATCH_MNT}"
+
+echo "+ check fs"
+_scratch_xfs_repair -n >> "$seqres.full" 2>&1 || \
+ _fail "xfs_repair should not fail"
+
+echo "+ corrupt image"
+seq 0 $((agcount - 1)) | while read ag; do
+ $XFS_DB_PROG -x -c "agf ${ag}" -c "agf ${ag}" -c "addr refcntroot" \
+ -c "stack" -c "blocktrash -x 4096 -y 4096 -z -n 8 -3" \
+ "${SCRATCH_DEV}" >> "$seqres.full" 2>&1
+done
+
+echo "+ mount image"
+_scratch_mount
+
+echo "+ reflink more"
+_cp_reflink "${SCRATCH_MNT}/file1" "${SCRATCH_MNT}/file4" 2> /dev/null && \
+ _fail "should not be able to reflink with busted refcount btree"
+umount "${SCRATCH_MNT}"
+
+echo "+ repair fs"
+_scratch_xfs_repair >> "$seqres.full" 2>&1
+_scratch_xfs_repair >> "$seqres.full" 2>&1
+
+echo "+ mount image (2)"
+_scratch_mount
+
+echo "+ chattr -R -i"
+chattr -R -f -i "${SCRATCH_MNT}/"
+
+echo "+ reflink more (2)"
+_cp_reflink "${SCRATCH_MNT}/file1" "${SCRATCH_MNT}/file5" || \
+ _fail "modified refcount tree"
+umount "${SCRATCH_MNT}"
+
+echo "+ check fs (2)"
+_scratch_xfs_repair -n >> "$seqres.full" 2>&1 || \
+ _fail "xfs_repair should not fail"
+
+status=0
+exit
diff --git a/tests/xfs/803.out b/tests/xfs/803.out
new file mode 100644
index 0000000..582682d
--- /dev/null
+++ b/tests/xfs/803.out
@@ -0,0 +1,13 @@
+QA output created by 803
++ create scratch fs
++ mount fs image
++ make some files
++ check fs
++ corrupt image
++ mount image
++ reflink more
++ repair fs
++ mount image (2)
++ chattr -R -i
++ reflink more (2)
++ check fs (2)
diff --git a/tests/xfs/804 b/tests/xfs/804
new file mode 100755
index 0000000..c46a7a0
--- /dev/null
+++ b/tests/xfs/804
@@ -0,0 +1,77 @@
+#! /bin/bash
+# FS QA Test No. 804
+#
+# Ensure that we can't reflink realtime files.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ umount "$SCRATCH_MNT" > /dev/null 2>&1
+ rm -rf "$tmp".* "$TESTDIR" "$METADUMP_FILE"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+test -b "$TEST_RTDEV" || _notrun "Need TEST_RTDEV to run this test."
+_require_scratch_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+_scratch_mkfs -r rtdev=$TEST_RTDEV >/dev/null 2>&1
+_scratch_mount -o rtdev=$TEST_RTDEV
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original file blocks"
+BLKSZ=65536
+touch "$TESTDIR/file1"
+$XFS_IO_PROG -c 'chattr +r' "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+
+echo "Reflink every other block"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+
+test -s "$TESTDIR/file2" && _fail "Should not be able to reflink a realtime file."
+
+echo "Check restored fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/804.out b/tests/xfs/804.out
new file mode 100644
index 0000000..e69de29
diff --git a/tests/xfs/group b/tests/xfs/group
index 8261f86..eccfb73 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -220,3 +220,8 @@
303 auto quick quota
304 auto quick quota
305 auto quota
+800 auto quick clone
+801 auto quick clone
+802 auto quick clone
+803 fuzzers
+804 auto quick clone
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 10/11] reflink: test what happens when we hit resource limits
2015-11-11 19:26 ` Darrick J. Wong
@ 2015-11-11 19:27 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Add a few horrible opt-in stress tests to see what happens if we try
to reflink the same block billions of times, and what happens if we
run out of space while reflinking a file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/840 | 99 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/840.out | 0
tests/generic/841 | 81 ++++++++++++++++++++++++++++++++++++++++
tests/generic/841.out | 5 ++
tests/generic/group | 2 +
5 files changed, 187 insertions(+)
create mode 100755 tests/generic/840
create mode 100644 tests/generic/840.out
create mode 100755 tests/generic/841
create mode 100644 tests/generic/841.out
diff --git a/tests/generic/840 b/tests/generic/840
new file mode 100755
index 0000000..137cc3d
--- /dev/null
+++ b/tests/generic/840
@@ -0,0 +1,99 @@
+#! /bin/bash
+# FS QA Test No. 840
+#
+# Try to hit the maximum reference count (eek!)
+#
+# This test runs extremely slowly, so it's not automatically run anywhere.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+# Well let's hope the maximum reflink count is (less than (ha!)) 2^32...
+
+echo "Create a one block file"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2" >> "$seqres.full"
+
+nr=32
+fnr=32
+for i in $(seq 0 $fnr); do
+ echo " ++ Reflink size $i, $(( (2 ** i) * BLKSZ)) bytes" | tee -a "$seqres.full"
+ n=$(( (2 ** i) * BLKSZ))
+ _reflink_range "$TESTDIR/file1" 0 "$TESTDIR/file1" $n $n >> "$seqres.full" || break
+done
+
+nrf=$((nr - fnr))
+echo "Clone $((2 ** nrf)) files"
+seq 0 $((2 ** nrf)) | while read i; do
+ _cp-reflink "$TESTDIR/file1" "$TESTDIR/file1-$i"
+done
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Remove big file and recheck"
+_scratch_mount >> "$seqres.full" 2>&1
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Remove all files and recheck"
+_scratch_mount >> "$seqres.full" 2>&1
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/840.out b/tests/generic/840.out
new file mode 100644
index 0000000..e69de29
diff --git a/tests/generic/841 b/tests/generic/841
new file mode 100755
index 0000000..b89dba4
--- /dev/null
+++ b/tests/generic/841
@@ -0,0 +1,81 @@
+#! /bin/bash
+# FS QA Test No. 841
+#
+# Try to run out of space while cloning?
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+NR_FREE="$(stat -f -c '%f' "$TESTDIR")"
+echo "Create a big file"
+touch "$TESTDIR/file0" "$TESTDIR/file1"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_FREE)) "$TESTDIR/bigfile" >> "$seqres.full" 2>&1
+_scratch_remount
+sz="$(stat -c '%s' "$TESTDIR/bigfile")"
+
+blks="$((sz / BLKSZ))"
+echo "Try to reflink"
+seq 0 $blks | while read lblk; do
+ fname="$TESTDIR/file$((lblk % 2))"
+ out="$(_reflink_range "$TESTDIR/bigfile" $((lblk * BLKSZ)) "$fname" $((lblk * BLKSZ)) $BLKSZ 2>&1)"
+ echo "$fname: $out" >> "$seqres.full"
+ echo "$out" | grep -q "No space left on device" && break
+done
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/841.out b/tests/generic/841.out
new file mode 100644
index 0000000..33c46fd
--- /dev/null
+++ b/tests/generic/841.out
@@ -0,0 +1,5 @@
+QA output created by 841
+Format and mount
+Create a big file
+Try to reflink
+Check scratch fs
diff --git a/tests/generic/group b/tests/generic/group
index 90f28aa..eef608f 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -247,4 +247,6 @@
837 auto quick clone
838 auto quick clone
839 auto quick clone
+840 clone_stress
+841 clone_stress
846 auto quick clone
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH 10/11] reflink: test what happens when we hit resource limits
@ 2015-11-11 19:27 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Add a few horrible opt-in stress tests to see what happens if we try
to reflink the same block billions of times, and what happens if we
run out of space while reflinking a file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
tests/generic/840 | 99 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/840.out | 0
tests/generic/841 | 81 ++++++++++++++++++++++++++++++++++++++++
tests/generic/841.out | 5 ++
tests/generic/group | 2 +
5 files changed, 187 insertions(+)
create mode 100755 tests/generic/840
create mode 100644 tests/generic/840.out
create mode 100755 tests/generic/841
create mode 100644 tests/generic/841.out
diff --git a/tests/generic/840 b/tests/generic/840
new file mode 100755
index 0000000..137cc3d
--- /dev/null
+++ b/tests/generic/840
@@ -0,0 +1,99 @@
+#! /bin/bash
+# FS QA Test No. 840
+#
+# Try to hit the maximum reference count (eek!)
+#
+# This test runs extremely slowly, so it's not automatically run anywhere.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+# Well let's hope the maximum reflink count is (less than (ha!)) 2^32...
+
+echo "Create a one block file"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+_pwrite_byte 0x61 0 $BLKSZ "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $BLKSZ "$TESTDIR/file2" >> "$seqres.full"
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2" >> "$seqres.full"
+
+nr=32
+fnr=32
+for i in $(seq 0 $fnr); do
+ echo " ++ Reflink size $i, $(( (2 ** i) * BLKSZ)) bytes" | tee -a "$seqres.full"
+ n=$(( (2 ** i) * BLKSZ))
+ _reflink_range "$TESTDIR/file1" 0 "$TESTDIR/file1" $n $n >> "$seqres.full" || break
+done
+
+nrf=$((nr - fnr))
+echo "Clone $((2 ** nrf)) files"
+seq 0 $((2 ** nrf)) | while read i; do
+ _cp-reflink "$TESTDIR/file1" "$TESTDIR/file1-$i"
+done
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Remove big file and recheck"
+_scratch_mount >> "$seqres.full" 2>&1
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+echo "Remove all files and recheck"
+_scratch_mount >> "$seqres.full" 2>&1
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/840.out b/tests/generic/840.out
new file mode 100644
index 0000000..e69de29
diff --git a/tests/generic/841 b/tests/generic/841
new file mode 100755
index 0000000..b89dba4
--- /dev/null
+++ b/tests/generic/841
@@ -0,0 +1,81 @@
+#! /bin/bash
+# FS QA Test No. 841
+#
+# Try to run out of space while cloning?
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+NR_FREE="$(stat -f -c '%f' "$TESTDIR")"
+echo "Create a big file"
+touch "$TESTDIR/file0" "$TESTDIR/file1"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_FREE)) "$TESTDIR/bigfile" >> "$seqres.full" 2>&1
+_scratch_remount
+sz="$(stat -c '%s' "$TESTDIR/bigfile")"
+
+blks="$((sz / BLKSZ))"
+echo "Try to reflink"
+seq 0 $blks | while read lblk; do
+ fname="$TESTDIR/file$((lblk % 2))"
+ out="$(_reflink_range "$TESTDIR/bigfile" $((lblk * BLKSZ)) "$fname" $((lblk * BLKSZ)) $BLKSZ 2>&1)"
+ echo "$fname: $out" >> "$seqres.full"
+ echo "$out" | grep -q "No space left on device" && break
+done
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/841.out b/tests/generic/841.out
new file mode 100644
index 0000000..33c46fd
--- /dev/null
+++ b/tests/generic/841.out
@@ -0,0 +1,5 @@
+QA output created by 841
+Format and mount
+Create a big file
+Try to reflink
+Check scratch fs
diff --git a/tests/generic/group b/tests/generic/group
index 90f28aa..eef608f 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -247,4 +247,6 @@
837 auto quick clone
838 auto quick clone
839 auto quick clone
+840 clone_stress
+841 clone_stress
846 auto quick clone
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH 11/11] reflink: test that CoW writes fail when we're out of space
2015-11-11 19:26 ` Darrick J. Wong
@ 2015-11-11 19:27 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Ensure that copy-on-writing a reflinked file when there's no free disk
space reflects the desired ENOSPC back to userspace during the write
call. Tests the buffered IO, direct IO, and mmap write paths.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
common/rc | 2 -
tests/generic/842 | 107 ++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/842.out | 10 ++++
tests/generic/843 | 107 ++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/843.out | 10 ++++
tests/generic/844 | 109 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/844.out | 8 ++++
tests/generic/845 | 107 ++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/845.out | 10 ++++
tests/generic/group | 4 ++
10 files changed, 473 insertions(+), 1 deletion(-)
create mode 100755 tests/generic/842
create mode 100644 tests/generic/842.out
create mode 100755 tests/generic/843
create mode 100644 tests/generic/843.out
create mode 100755 tests/generic/844
create mode 100644 tests/generic/844.out
create mode 100755 tests/generic/845
create mode 100644 tests/generic/845.out
diff --git a/common/rc b/common/rc
index c016673..474fa84 100644
--- a/common/rc
+++ b/common/rc
@@ -101,7 +101,7 @@ _mwrite_byte() {
mmap_len="$4"
file="$5"
- "$XFS_IO_PROG" -f -c "mmap -rw 0 $mmap_len" -c "pwrite -S $pattern $offset $len" "$file"
+ "$XFS_IO_PROG" -f -c "mmap -rw 0 $mmap_len" -c "mwrite -S $pattern $offset $len" "$file"
}
# ls -l w/ selinux sometimes puts a dot at the end:
diff --git a/tests/generic/842 b/tests/generic/842
new file mode 100755
index 0000000..5eda56b
--- /dev/null
+++ b/tests/generic/842
@@ -0,0 +1,107 @@
+#! /bin/bash
+# FS QA Test No. 842
+#
+# Reflink a file, use up the rest of the space, then try to observe ENOSPC
+# while copy-on-writing the file via the page cache.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Reformat with appropriate size"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+NR_BLKS=10240
+umount "$SCRATCH_MNT"
+SZ_BYTES=$((NR_BLKS * 8 * BLKSZ))
+if [ $SZ_BYTES -lt $((32 * 1048576)) ]; then
+ SZ_BYTES=$((32 * 1048576))
+fi
+_scratch_mkfs_sized $SZ_BYTES >> "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create a big file and reflink it"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" >> "$seqres.full" 2>&1
+_cp_reflink "$TESTDIR/bigfile" "$TESTDIR/clonefile"
+sync
+
+echo "Allocate the rest of the space"
+NR_FREE="$(stat -f -c '%f' "$TESTDIR")"
+touch "$TESTDIR/file0" "$TESTDIR/file1"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_FREE)) "$TESTDIR/eat_my_space" >> "$seqres.full" 2>&1
+sync
+
+echo "CoW the big file"
+out="$(_pwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" 2>&1)"
+echo "${out}" | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
+echo "${out}" >> "$seqres.full" 2>&1
+echo "${out}"
+
+echo "Remount and try CoW again"
+_scratch_remount
+
+out="$(_pwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" 2>&1)"
+echo "${out}" | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
+echo "${out}" >> "$seqres.full" 2>&1
+echo "${out}"
+
+#filefrag -v $TESTDIR/bigfile
+#filefrag -v $TESTDIR/clonefile
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/842.out b/tests/generic/842.out
new file mode 100644
index 0000000..df58025
--- /dev/null
+++ b/tests/generic/842.out
@@ -0,0 +1,10 @@
+QA output created by 842
+Format and mount
+Reformat with appropriate size
+Create a big file and reflink it
+Allocate the rest of the space
+CoW the big file
+pwrite64: No space left on device
+Remount and try CoW again
+pwrite64: No space left on device
+Check scratch fs
diff --git a/tests/generic/843 b/tests/generic/843
new file mode 100755
index 0000000..03dc570
--- /dev/null
+++ b/tests/generic/843
@@ -0,0 +1,107 @@
+#! /bin/bash
+# FS QA Test No. 843
+#
+# Reflink a file that uses more than half of the space, then try to observe
+# ENOSPC while copy-on-writing the file via the page cache.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Reformat with appropriate size"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+NR_BLKS=10240
+umount "$SCRATCH_MNT"
+SZ_BYTES=$((NR_BLKS * 3 / 2 * BLKSZ))
+if [ $SZ_BYTES -lt $((32 * 1048576)) ]; then
+ SZ_BYTES=$((32 * 1048576))
+fi
+_scratch_mkfs_sized $SZ_BYTES >> "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create a big file and reflink it"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" >> "$seqres.full" 2>&1
+_cp_reflink "$TESTDIR/bigfile" "$TESTDIR/clonefile"
+sync
+
+echo "Allocate the rest of the space"
+NR_FREE="$(stat -f -c '%f' "$TESTDIR")"
+touch "$TESTDIR/file0" "$TESTDIR/file1"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_FREE)) "$TESTDIR/eat_my_space" >> "$seqres.full" 2>&1
+sync
+
+echo "CoW the big file"
+out="$(_pwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" 2>&1)"
+echo "${out}" | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
+echo "${out}" >> "$seqres.full" 2>&1
+echo "${out}"
+
+echo "Remount and try CoW again"
+_scratch_remount
+
+out="$(_pwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" 2>&1)"
+echo "${out}" | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
+echo "${out}" >> "$seqres.full" 2>&1
+echo "${out}"
+
+#filefrag -v $TESTDIR/bigfile
+#filefrag -v $TESTDIR/clonefile
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/843.out b/tests/generic/843.out
new file mode 100644
index 0000000..43c1cf6
--- /dev/null
+++ b/tests/generic/843.out
@@ -0,0 +1,10 @@
+QA output created by 843
+Format and mount
+Reformat with appropriate size
+Create a big file and reflink it
+Allocate the rest of the space
+CoW the big file
+pwrite64: No space left on device
+Remount and try CoW again
+pwrite64: No space left on device
+Check scratch fs
diff --git a/tests/generic/844 b/tests/generic/844
new file mode 100755
index 0000000..70bc235
--- /dev/null
+++ b/tests/generic/844
@@ -0,0 +1,109 @@
+#! /bin/bash
+# FS QA Test No. 844
+#
+# Reflink a file, use up the rest of the space, then try to observe ENOSPC
+# while copy-on-writing the file via mmap.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Reformat with appropriate size"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+NR_BLKS=10240
+umount "$SCRATCH_MNT"
+SZ_BYTES=$((NR_BLKS * 8 * BLKSZ))
+if [ $SZ_BYTES -lt $((32 * 1048576)) ]; then
+ SZ_BYTES=$((32 * 1048576))
+fi
+_scratch_mkfs_sized $SZ_BYTES >> "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create a big file and reflink it"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" >> "$seqres.full" 2>&1
+_cp_reflink "$TESTDIR/bigfile" "$TESTDIR/clonefile"
+sync
+
+echo "Allocate the rest of the space"
+NR_FREE="$(stat -f -c '%f' "$TESTDIR")"
+touch "$TESTDIR/file0" "$TESTDIR/file1"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_FREE)) "$TESTDIR/eat_my_space" >> "$seqres.full" 2>&1
+sync
+
+echo "mmap CoW the big file"
+out="$(_mwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" 2>&1)"
+err="$?"
+if [ "$err" -lt 128 ]; then
+ echo "mmap CoW should have failed with SIGBUS, got SIG$(kill -l $err)"
+fi
+
+echo "Remount and try CoW again"
+_scratch_remount
+
+out="$(_mwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" 2>&1)"
+err="$?"
+if [ "$err" -lt 128 ]; then
+ echo "mmap CoW should have failed with SIGBUS, got SIG$(kill -l $err)"
+fi
+
+#filefrag -v $TESTDIR/bigfile
+#filefrag -v $TESTDIR/clonefile
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/844.out b/tests/generic/844.out
new file mode 100644
index 0000000..130afc1
--- /dev/null
+++ b/tests/generic/844.out
@@ -0,0 +1,8 @@
+QA output created by 844
+Format and mount
+Reformat with appropriate size
+Create a big file and reflink it
+Allocate the rest of the space
+mmap CoW the big file
+Remount and try CoW again
+Check scratch fs
diff --git a/tests/generic/845 b/tests/generic/845
new file mode 100755
index 0000000..5efaf38
--- /dev/null
+++ b/tests/generic/845
@@ -0,0 +1,107 @@
+#! /bin/bash
+# FS QA Test No. 845
+#
+# Reflink a file, use up the rest of the space, then try to observe ENOSPC
+# while copy-on-writing the file via direct-io.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Reformat with appropriate size"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+NR_BLKS=10240
+umount "$SCRATCH_MNT"
+SZ_BYTES=$((NR_BLKS * 8 * BLKSZ))
+if [ $SZ_BYTES -lt $((32 * 1048576)) ]; then
+ SZ_BYTES=$((32 * 1048576))
+fi
+_scratch_mkfs_sized $SZ_BYTES >> "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create a big file and reflink it"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" >> "$seqres.full" 2>&1
+_cp_reflink "$TESTDIR/bigfile" "$TESTDIR/clonefile"
+sync
+
+echo "Allocate the rest of the space"
+NR_FREE="$(stat -f -c '%f' "$TESTDIR")"
+touch "$TESTDIR/file0" "$TESTDIR/file1"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_FREE)) "$TESTDIR/eat_my_space" >> "$seqres.full" 2>&1
+sync
+
+echo "CoW the big file"
+out="$(_pwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" -d 2>&1)"
+echo "${out}" | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
+echo "${out}" >> "$seqres.full" 2>&1
+echo "${out}"
+
+echo "Remount and try CoW again"
+_scratch_remount
+
+out="$(_pwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" -d 2>&1)"
+echo "${out}" | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
+echo "${out}" >> "$seqres.full" 2>&1
+echo "${out}"
+
+#filefrag -v $TESTDIR/bigfile
+#filefrag -v $TESTDIR/clonefile
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/845.out b/tests/generic/845.out
new file mode 100644
index 0000000..d367a73
--- /dev/null
+++ b/tests/generic/845.out
@@ -0,0 +1,10 @@
+QA output created by 845
+Format and mount
+Reformat with appropriate size
+Create a big file and reflink it
+Allocate the rest of the space
+CoW the big file
+pwrite64: No space left on device
+Remount and try CoW again
+pwrite64: No space left on device
+Check scratch fs
diff --git a/tests/generic/group b/tests/generic/group
index eef608f..e184473 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -249,4 +249,8 @@
839 auto quick clone
840 clone_stress
841 clone_stress
+842 auto quick clone
+843 auto quick clone
+844 auto quick clone
+845 auto quick clone
846 auto quick clone
^ permalink raw reply related [flat|nested] 38+ messages in thread* [PATCH 11/11] reflink: test that CoW writes fail when we're out of space
@ 2015-11-11 19:27 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-11 19:27 UTC (permalink / raw)
To: hch, david, darrick.wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Ensure that copy-on-writing a reflinked file when there's no free disk
space reflects the desired ENOSPC back to userspace during the write
call. Tests the buffered IO, direct IO, and mmap write paths.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
common/rc | 2 -
tests/generic/842 | 107 ++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/842.out | 10 ++++
tests/generic/843 | 107 ++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/843.out | 10 ++++
tests/generic/844 | 109 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/844.out | 8 ++++
tests/generic/845 | 107 ++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/845.out | 10 ++++
tests/generic/group | 4 ++
10 files changed, 473 insertions(+), 1 deletion(-)
create mode 100755 tests/generic/842
create mode 100644 tests/generic/842.out
create mode 100755 tests/generic/843
create mode 100644 tests/generic/843.out
create mode 100755 tests/generic/844
create mode 100644 tests/generic/844.out
create mode 100755 tests/generic/845
create mode 100644 tests/generic/845.out
diff --git a/common/rc b/common/rc
index c016673..474fa84 100644
--- a/common/rc
+++ b/common/rc
@@ -101,7 +101,7 @@ _mwrite_byte() {
mmap_len="$4"
file="$5"
- "$XFS_IO_PROG" -f -c "mmap -rw 0 $mmap_len" -c "pwrite -S $pattern $offset $len" "$file"
+ "$XFS_IO_PROG" -f -c "mmap -rw 0 $mmap_len" -c "mwrite -S $pattern $offset $len" "$file"
}
# ls -l w/ selinux sometimes puts a dot at the end:
diff --git a/tests/generic/842 b/tests/generic/842
new file mode 100755
index 0000000..5eda56b
--- /dev/null
+++ b/tests/generic/842
@@ -0,0 +1,107 @@
+#! /bin/bash
+# FS QA Test No. 842
+#
+# Reflink a file, use up the rest of the space, then try to observe ENOSPC
+# while copy-on-writing the file via the page cache.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Reformat with appropriate size"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+NR_BLKS=10240
+umount "$SCRATCH_MNT"
+SZ_BYTES=$((NR_BLKS * 8 * BLKSZ))
+if [ $SZ_BYTES -lt $((32 * 1048576)) ]; then
+ SZ_BYTES=$((32 * 1048576))
+fi
+_scratch_mkfs_sized $SZ_BYTES >> "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create a big file and reflink it"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" >> "$seqres.full" 2>&1
+_cp_reflink "$TESTDIR/bigfile" "$TESTDIR/clonefile"
+sync
+
+echo "Allocate the rest of the space"
+NR_FREE="$(stat -f -c '%f' "$TESTDIR")"
+touch "$TESTDIR/file0" "$TESTDIR/file1"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_FREE)) "$TESTDIR/eat_my_space" >> "$seqres.full" 2>&1
+sync
+
+echo "CoW the big file"
+out="$(_pwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" 2>&1)"
+echo "${out}" | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
+echo "${out}" >> "$seqres.full" 2>&1
+echo "${out}"
+
+echo "Remount and try CoW again"
+_scratch_remount
+
+out="$(_pwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" 2>&1)"
+echo "${out}" | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
+echo "${out}" >> "$seqres.full" 2>&1
+echo "${out}"
+
+#filefrag -v $TESTDIR/bigfile
+#filefrag -v $TESTDIR/clonefile
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/842.out b/tests/generic/842.out
new file mode 100644
index 0000000..df58025
--- /dev/null
+++ b/tests/generic/842.out
@@ -0,0 +1,10 @@
+QA output created by 842
+Format and mount
+Reformat with appropriate size
+Create a big file and reflink it
+Allocate the rest of the space
+CoW the big file
+pwrite64: No space left on device
+Remount and try CoW again
+pwrite64: No space left on device
+Check scratch fs
diff --git a/tests/generic/843 b/tests/generic/843
new file mode 100755
index 0000000..03dc570
--- /dev/null
+++ b/tests/generic/843
@@ -0,0 +1,107 @@
+#! /bin/bash
+# FS QA Test No. 843
+#
+# Reflink a file that uses more than half of the space, then try to observe
+# ENOSPC while copy-on-writing the file via the page cache.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Reformat with appropriate size"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+NR_BLKS=10240
+umount "$SCRATCH_MNT"
+SZ_BYTES=$((NR_BLKS * 3 / 2 * BLKSZ))
+if [ $SZ_BYTES -lt $((32 * 1048576)) ]; then
+ SZ_BYTES=$((32 * 1048576))
+fi
+_scratch_mkfs_sized $SZ_BYTES >> "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create a big file and reflink it"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" >> "$seqres.full" 2>&1
+_cp_reflink "$TESTDIR/bigfile" "$TESTDIR/clonefile"
+sync
+
+echo "Allocate the rest of the space"
+NR_FREE="$(stat -f -c '%f' "$TESTDIR")"
+touch "$TESTDIR/file0" "$TESTDIR/file1"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_FREE)) "$TESTDIR/eat_my_space" >> "$seqres.full" 2>&1
+sync
+
+echo "CoW the big file"
+out="$(_pwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" 2>&1)"
+echo "${out}" | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
+echo "${out}" >> "$seqres.full" 2>&1
+echo "${out}"
+
+echo "Remount and try CoW again"
+_scratch_remount
+
+out="$(_pwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" 2>&1)"
+echo "${out}" | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
+echo "${out}" >> "$seqres.full" 2>&1
+echo "${out}"
+
+#filefrag -v $TESTDIR/bigfile
+#filefrag -v $TESTDIR/clonefile
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/843.out b/tests/generic/843.out
new file mode 100644
index 0000000..43c1cf6
--- /dev/null
+++ b/tests/generic/843.out
@@ -0,0 +1,10 @@
+QA output created by 843
+Format and mount
+Reformat with appropriate size
+Create a big file and reflink it
+Allocate the rest of the space
+CoW the big file
+pwrite64: No space left on device
+Remount and try CoW again
+pwrite64: No space left on device
+Check scratch fs
diff --git a/tests/generic/844 b/tests/generic/844
new file mode 100755
index 0000000..70bc235
--- /dev/null
+++ b/tests/generic/844
@@ -0,0 +1,109 @@
+#! /bin/bash
+# FS QA Test No. 844
+#
+# Reflink a file, use up the rest of the space, then try to observe ENOSPC
+# while copy-on-writing the file via mmap.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Reformat with appropriate size"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+NR_BLKS=10240
+umount "$SCRATCH_MNT"
+SZ_BYTES=$((NR_BLKS * 8 * BLKSZ))
+if [ $SZ_BYTES -lt $((32 * 1048576)) ]; then
+ SZ_BYTES=$((32 * 1048576))
+fi
+_scratch_mkfs_sized $SZ_BYTES >> "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create a big file and reflink it"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" >> "$seqres.full" 2>&1
+_cp_reflink "$TESTDIR/bigfile" "$TESTDIR/clonefile"
+sync
+
+echo "Allocate the rest of the space"
+NR_FREE="$(stat -f -c '%f' "$TESTDIR")"
+touch "$TESTDIR/file0" "$TESTDIR/file1"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_FREE)) "$TESTDIR/eat_my_space" >> "$seqres.full" 2>&1
+sync
+
+echo "mmap CoW the big file"
+out="$(_mwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" 2>&1)"
+err="$?"
+if [ "$err" -lt 128 ]; then
+ echo "mmap CoW should have failed with SIGBUS, got SIG$(kill -l $err)"
+fi
+
+echo "Remount and try CoW again"
+_scratch_remount
+
+out="$(_mwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" 2>&1)"
+err="$?"
+if [ "$err" -lt 128 ]; then
+ echo "mmap CoW should have failed with SIGBUS, got SIG$(kill -l $err)"
+fi
+
+#filefrag -v $TESTDIR/bigfile
+#filefrag -v $TESTDIR/clonefile
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/844.out b/tests/generic/844.out
new file mode 100644
index 0000000..130afc1
--- /dev/null
+++ b/tests/generic/844.out
@@ -0,0 +1,8 @@
+QA output created by 844
+Format and mount
+Reformat with appropriate size
+Create a big file and reflink it
+Allocate the rest of the space
+mmap CoW the big file
+Remount and try CoW again
+Check scratch fs
diff --git a/tests/generic/845 b/tests/generic/845
new file mode 100755
index 0000000..5efaf38
--- /dev/null
+++ b/tests/generic/845
@@ -0,0 +1,107 @@
+#! /bin/bash
+# FS QA Test No. 845
+#
+# Reflink a file, use up the rest of the space, then try to observe ENOSPC
+# while copy-on-writing the file via direct-io.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".* "$TESTDIR1"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+TESTDIR="$SCRATCH_MNT/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Reformat with appropriate size"
+BLKSZ="$(stat -f "$TESTDIR" -c '%S')"
+NR_BLKS=10240
+umount "$SCRATCH_MNT"
+SZ_BYTES=$((NR_BLKS * 8 * BLKSZ))
+if [ $SZ_BYTES -lt $((32 * 1048576)) ]; then
+ SZ_BYTES=$((32 * 1048576))
+fi
+_scratch_mkfs_sized $SZ_BYTES >> "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create a big file and reflink it"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" >> "$seqres.full" 2>&1
+_cp_reflink "$TESTDIR/bigfile" "$TESTDIR/clonefile"
+sync
+
+echo "Allocate the rest of the space"
+NR_FREE="$(stat -f -c '%f' "$TESTDIR")"
+touch "$TESTDIR/file0" "$TESTDIR/file1"
+_pwrite_byte 0x61 0 $((BLKSZ * NR_FREE)) "$TESTDIR/eat_my_space" >> "$seqres.full" 2>&1
+sync
+
+echo "CoW the big file"
+out="$(_pwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" -d 2>&1)"
+echo "${out}" | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
+echo "${out}" >> "$seqres.full" 2>&1
+echo "${out}"
+
+echo "Remount and try CoW again"
+_scratch_remount
+
+out="$(_pwrite_byte 0x62 0 $((BLKSZ * NR_BLKS)) "$TESTDIR/bigfile" -d 2>&1)"
+echo "${out}" | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
+echo "${out}" >> "$seqres.full" 2>&1
+echo "${out}"
+
+#filefrag -v $TESTDIR/bigfile
+#filefrag -v $TESTDIR/clonefile
+
+echo "Check scratch fs"
+umount "$SCRATCH_MNT"
+_check_scratch_fs
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/845.out b/tests/generic/845.out
new file mode 100644
index 0000000..d367a73
--- /dev/null
+++ b/tests/generic/845.out
@@ -0,0 +1,10 @@
+QA output created by 845
+Format and mount
+Reformat with appropriate size
+Create a big file and reflink it
+Allocate the rest of the space
+CoW the big file
+pwrite64: No space left on device
+Remount and try CoW again
+pwrite64: No space left on device
+Check scratch fs
diff --git a/tests/generic/group b/tests/generic/group
index eef608f..e184473 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -249,4 +249,8 @@
839 auto quick clone
840 clone_stress
841 clone_stress
+842 auto quick clone
+843 auto quick clone
+844 auto quick clone
+845 auto quick clone
846 auto quick clone
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
2015-11-11 19:26 ` Darrick J. Wong
@ 2015-11-12 9:07 ` Christoph Hellwig
-1 siblings, 0 replies; 38+ messages in thread
From: Christoph Hellwig @ 2015-11-12 9:07 UTC (permalink / raw)
To: Darrick J. Wong
Cc: hch, david, fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker,
linux-btrfs
Looks fine:
Acked-by: Christoph Hellwig <hch@lst.de>
some of the free block range stuff might need minor fixups for certain
file systems later, but I'd rather do this once all the patches are
merged.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
@ 2015-11-12 9:07 ` Christoph Hellwig
0 siblings, 0 replies; 38+ messages in thread
From: Christoph Hellwig @ 2015-11-12 9:07 UTC (permalink / raw)
To: Darrick J. Wong
Cc: fstests, xfs, hch, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
Looks fine:
Acked-by: Christoph Hellwig <hch@lst.de>
some of the free block range stuff might need minor fixups for certain
file systems later, but I'd rather do this once all the patches are
merged.
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
2015-11-12 9:07 ` Christoph Hellwig
@ 2015-11-12 12:51 ` Christoph Hellwig
-1 siblings, 0 replies; 38+ messages in thread
From: Christoph Hellwig @ 2015-11-12 12:51 UTC (permalink / raw)
To: Darrick J. Wong
Cc: david, fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
On Thu, Nov 12, 2015 at 01:07:56AM -0800, Christoph Hellwig wrote:
> Looks fine:
>
> Acked-by: Christoph Hellwig <hch@lst.de>
Actually I take this back. I had though this was the existing series
with my fixes, but this one still incorrectly assumes that if reflink
works dedup works as well, leading to lots of false failures on nfs.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
@ 2015-11-12 12:51 ` Christoph Hellwig
0 siblings, 0 replies; 38+ messages in thread
From: Christoph Hellwig @ 2015-11-12 12:51 UTC (permalink / raw)
To: Darrick J. Wong
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
On Thu, Nov 12, 2015 at 01:07:56AM -0800, Christoph Hellwig wrote:
> Looks fine:
>
> Acked-by: Christoph Hellwig <hch@lst.de>
Actually I take this back. I had though this was the existing series
with my fixes, but this one still incorrectly assumes that if reflink
works dedup works as well, leading to lots of false failures on nfs.
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
2015-11-12 12:51 ` Christoph Hellwig
@ 2015-11-12 17:34 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-12 17:34 UTC (permalink / raw)
To: Christoph Hellwig
Cc: david, fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
On Thu, Nov 12, 2015 at 04:51:15AM -0800, Christoph Hellwig wrote:
> On Thu, Nov 12, 2015 at 01:07:56AM -0800, Christoph Hellwig wrote:
> > Looks fine:
> >
> > Acked-by: Christoph Hellwig <hch@lst.de>
>
> Actually I take this back. I had though this was the existing series
> with my fixes, but this one still incorrectly assumes that if reflink
> works dedup works as well, leading to lots of false failures on nfs.
Bleargh, _require_*_dedupe forgot to check for ENOTTY output, so all the dedupe
tests should have _notrun.
Also, generic/806 was calling the wrong _require.
I'll start renumbering tests; Christoph, did you see anything else?
--D
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
@ 2015-11-12 17:34 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-12 17:34 UTC (permalink / raw)
To: Christoph Hellwig
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
On Thu, Nov 12, 2015 at 04:51:15AM -0800, Christoph Hellwig wrote:
> On Thu, Nov 12, 2015 at 01:07:56AM -0800, Christoph Hellwig wrote:
> > Looks fine:
> >
> > Acked-by: Christoph Hellwig <hch@lst.de>
>
> Actually I take this back. I had though this was the existing series
> with my fixes, but this one still incorrectly assumes that if reflink
> works dedup works as well, leading to lots of false failures on nfs.
Bleargh, _require_*_dedupe forgot to check for ENOTTY output, so all the dedupe
tests should have _notrun.
Also, generic/806 was calling the wrong _require.
I'll start renumbering tests; Christoph, did you see anything else?
--D
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
2015-11-12 17:34 ` Darrick J. Wong
@ 2015-11-12 17:36 ` Christoph Hellwig
-1 siblings, 0 replies; 38+ messages in thread
From: Christoph Hellwig @ 2015-11-12 17:36 UTC (permalink / raw)
To: Darrick J. Wong
Cc: Christoph Hellwig, david, fstests, xfs, tao.peng, linux-ext4,
Anna.Schumaker, linux-btrfs
On Thu, Nov 12, 2015 at 09:34:27AM -0800, Darrick J. Wong wrote:
> Bleargh, _require_*_dedupe forgot to check for ENOTTY output, so all the dedupe
> tests should have _notrun.
>
> Also, generic/806 was calling the wrong _require.
>
> I'll start renumbering tests; Christoph, did you see anything else?
Looks fine so far otherwise.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
@ 2015-11-12 17:36 ` Christoph Hellwig
0 siblings, 0 replies; 38+ messages in thread
From: Christoph Hellwig @ 2015-11-12 17:36 UTC (permalink / raw)
To: Darrick J. Wong
Cc: fstests, xfs, Christoph Hellwig, tao.peng, linux-ext4,
Anna.Schumaker, linux-btrfs
On Thu, Nov 12, 2015 at 09:34:27AM -0800, Darrick J. Wong wrote:
> Bleargh, _require_*_dedupe forgot to check for ENOTTY output, so all the dedupe
> tests should have _notrun.
>
> Also, generic/806 was calling the wrong _require.
>
> I'll start renumbering tests; Christoph, did you see anything else?
Looks fine so far otherwise.
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
2015-11-12 17:36 ` Christoph Hellwig
@ 2015-11-13 9:08 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-13 9:08 UTC (permalink / raw)
To: Christoph Hellwig
Cc: david, fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
On Thu, Nov 12, 2015 at 09:36:35AM -0800, Christoph Hellwig wrote:
> On Thu, Nov 12, 2015 at 09:34:27AM -0800, Darrick J. Wong wrote:
> > Bleargh, _require_*_dedupe forgot to check for ENOTTY output, so all the dedupe
> > tests should have _notrun.
> >
> > Also, generic/806 was calling the wrong _require.
> >
> > I'll start renumbering tests; Christoph, did you see anything else?
>
> Looks fine so far otherwise.
I think I got all the tests renumbered correctly and fixed all the other bugs.
I'd like to send the updated patchpile to Dave tomorrow, but if you have a few
spare cycles would you mind giving this a quick test to make sure I fixed
everything?
https://github.com/djwong/xfstests/tree/for-dave
--D
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
@ 2015-11-13 9:08 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-13 9:08 UTC (permalink / raw)
To: Christoph Hellwig
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
On Thu, Nov 12, 2015 at 09:36:35AM -0800, Christoph Hellwig wrote:
> On Thu, Nov 12, 2015 at 09:34:27AM -0800, Darrick J. Wong wrote:
> > Bleargh, _require_*_dedupe forgot to check for ENOTTY output, so all the dedupe
> > tests should have _notrun.
> >
> > Also, generic/806 was calling the wrong _require.
> >
> > I'll start renumbering tests; Christoph, did you see anything else?
>
> Looks fine so far otherwise.
I think I got all the tests renumbered correctly and fixed all the other bugs.
I'd like to send the updated patchpile to Dave tomorrow, but if you have a few
spare cycles would you mind giving this a quick test to make sure I fixed
everything?
https://github.com/djwong/xfstests/tree/for-dave
--D
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
2015-11-13 9:08 ` Darrick J. Wong
@ 2015-11-13 14:12 ` Christoph Hellwig
-1 siblings, 0 replies; 38+ messages in thread
From: Christoph Hellwig @ 2015-11-13 14:12 UTC (permalink / raw)
To: Darrick J. Wong
Cc: Christoph Hellwig, david, fstests, xfs, tao.peng, linux-ext4,
Anna.Schumaker, linux-btrfs
On Fri, Nov 13, 2015 at 01:08:22AM -0800, Darrick J. Wong wrote:
> I think I got all the tests renumbered correctly and fixed all the other bugs.
> I'd like to send the updated patchpile to Dave tomorrow, but if you have a few
> spare cycles would you mind giving this a quick test to make sure I fixed
> everything?
>
> https://github.com/djwong/xfstests/tree/for-dave
Looks good enough to go in
Acked-by: Christoph Hellwig <hch@lst.de>
I have for failing tests on NFS currently. Two of them probably are
NFS issues (free block count), but and two others fail because NFS
doesn't support chattr/lsattr. I will send an incremental check to adda
feature test for those.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
@ 2015-11-13 14:12 ` Christoph Hellwig
0 siblings, 0 replies; 38+ messages in thread
From: Christoph Hellwig @ 2015-11-13 14:12 UTC (permalink / raw)
To: Darrick J. Wong
Cc: fstests, xfs, Christoph Hellwig, tao.peng, linux-ext4,
Anna.Schumaker, linux-btrfs
On Fri, Nov 13, 2015 at 01:08:22AM -0800, Darrick J. Wong wrote:
> I think I got all the tests renumbered correctly and fixed all the other bugs.
> I'd like to send the updated patchpile to Dave tomorrow, but if you have a few
> spare cycles would you mind giving this a quick test to make sure I fixed
> everything?
>
> https://github.com/djwong/xfstests/tree/for-dave
Looks good enough to go in
Acked-by: Christoph Hellwig <hch@lst.de>
I have for failing tests on NFS currently. Two of them probably are
NFS issues (free block count), but and two others fail because NFS
doesn't support chattr/lsattr. I will send an incremental check to adda
feature test for those.
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
2015-11-13 14:12 ` Christoph Hellwig
@ 2015-11-13 18:32 ` Darrick J. Wong
-1 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-13 18:32 UTC (permalink / raw)
To: Christoph Hellwig
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
On Fri, Nov 13, 2015 at 06:12:28AM -0800, Christoph Hellwig wrote:
> On Fri, Nov 13, 2015 at 01:08:22AM -0800, Darrick J. Wong wrote:
> > I think I got all the tests renumbered correctly and fixed all the other bugs.
> > I'd like to send the updated patchpile to Dave tomorrow, but if you have a few
> > spare cycles would you mind giving this a quick test to make sure I fixed
> > everything?
> >
> > https://github.com/djwong/xfstests/tree/for-dave
>
> Looks good enough to go in
>
> Acked-by: Christoph Hellwig <hch@lst.de>
>
> I have for failing tests on NFS currently. Two of them probably are
> NFS issues (free block count), but and two others fail because NFS
> doesn't support chattr/lsattr. I will send an incremental check to adda
> feature test for those.
I separated the chattr +i tests into a separate test that doesn't run if lsattr
doesn't make sense; will post patches shortly.
--D
>
> _______________________________________________
> xfs mailing list
> xfs@oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [RFCv3.1 00/11] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls
@ 2015-11-13 18:32 ` Darrick J. Wong
0 siblings, 0 replies; 38+ messages in thread
From: Darrick J. Wong @ 2015-11-13 18:32 UTC (permalink / raw)
To: Christoph Hellwig
Cc: fstests, xfs, tao.peng, linux-ext4, Anna.Schumaker, linux-btrfs
On Fri, Nov 13, 2015 at 06:12:28AM -0800, Christoph Hellwig wrote:
> On Fri, Nov 13, 2015 at 01:08:22AM -0800, Darrick J. Wong wrote:
> > I think I got all the tests renumbered correctly and fixed all the other bugs.
> > I'd like to send the updated patchpile to Dave tomorrow, but if you have a few
> > spare cycles would you mind giving this a quick test to make sure I fixed
> > everything?
> >
> > https://github.com/djwong/xfstests/tree/for-dave
>
> Looks good enough to go in
>
> Acked-by: Christoph Hellwig <hch@lst.de>
>
> I have for failing tests on NFS currently. Two of them probably are
> NFS issues (free block count), but and two others fail because NFS
> doesn't support chattr/lsattr. I will send an incremental check to adda
> feature test for those.
I separated the chattr +i tests into a separate test that doesn't run if lsattr
doesn't make sense; will post patches shortly.
--D
>
> _______________________________________________
> xfs mailing list
> xfs@oss.sgi.com
> http://oss.sgi.com/mailman/listinfo/xfs
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 38+ messages in thread