* [PATCH] ARM: shmobile: r8a7793: Add GPIO nodes to device tree
@ 2015-11-16 13:49 Magnus Damm
2015-11-17 19:18 ` Simon Horman
0 siblings, 1 reply; 2+ messages in thread
From: Magnus Damm @ 2015-11-16 13:49 UTC (permalink / raw)
To: linux-sh
From: Magnus Damm <damm+renesas@opensource.se>
Add r8a7793 GPIO device nodes that are assumed to be identical
to r8a7791. This matches the data sheet for GPIO and MSTP bits.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---
arch/arm/boot/dts/r8a7793.dtsi | 121 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 118 insertions(+), 3 deletions(-)
--- 0001/arch/arm/boot/dts/r8a7793.dtsi
+++ work/arch/arm/boot/dts/r8a7793.dtsi 2015-11-16 20:37:27.720513000 +0900
@@ -57,6 +57,110 @@
interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO0>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO1>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO2>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO3>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO4>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO5>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO6>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO7>;
+ power-domains = <&cpg_clocks>;
+ };
+
thermal@e61f0000 {
compatible = "renesas,thermal-r8a7793", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
@@ -484,10 +588,21 @@
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
- clocks = <&cpg_clocks R8A7793_CLK_QSPI>;
+ clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cpg_clocks R8A7793_CLK_QSPI>;
#clock-cells = <1>;
- clock-indices = <R8A7793_CLK_QSPI_MOD>;
- clock-output-names = "qspi_mod";
+ clock-indices = <
+ R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6
+ R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
+ R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
+ R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
+ R8A7793_CLK_QSPI_MOD
+ >;
+ clock-output-names + "gpio7", "gpio6", "gpio5", "gpio4",
+ "gpio3", "gpio2", "gpio1", "gpio0",
+ "qspi_mod";
};
};
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: shmobile: r8a7793: Add GPIO nodes to device tree
2015-11-16 13:49 [PATCH] ARM: shmobile: r8a7793: Add GPIO nodes to device tree Magnus Damm
@ 2015-11-17 19:18 ` Simon Horman
0 siblings, 0 replies; 2+ messages in thread
From: Simon Horman @ 2015-11-17 19:18 UTC (permalink / raw)
To: linux-sh
On Mon, Nov 16, 2015 at 10:49:12PM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm+renesas@opensource.se>
>
> Add r8a7793 GPIO device nodes that are assumed to be identical
> to r8a7791. This matches the data sheet for GPIO and MSTP bits.
>
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Thanks, I have queued this up for v4.5.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-11-17 19:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-16 13:49 [PATCH] ARM: shmobile: r8a7793: Add GPIO nodes to device tree Magnus Damm
2015-11-17 19:18 ` Simon Horman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.