* [Qemu-devel] [Bug 1516203] Re: qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
[not found] <20151114031613.12052.15656.malonedeb@chaenomeles.canonical.com>
@ 2015-11-16 16:51 ` Serge Hallyn
2015-11-16 17:38 ` Kai Kasurinen
` (5 subsequent siblings)
6 siblings, 0 replies; 7+ messages in thread
From: Serge Hallyn @ 2015-11-16 16:51 UTC (permalink / raw)
To: qemu-devel
Could you please give the full command you used so that I can reproduce
this?
** Also affects: qemu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1516203
Title:
qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
Status in QEMU:
New
Status in qemu package in Ubuntu:
New
Bug description:
with -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProblemType: Crash
DistroRelease: Ubuntu 16.04
Package: qemu-system-x86 1:2.4+dfsg-4ubuntu2
ProcVersionSignature: Ubuntu 4.3.0-0.6-generic 4.3.0
Uname: Linux 4.3.0-0-generic x86_64
ApportVersion: 2.19.2-0ubuntu6
Architecture: amd64
CurrentDesktop: Unity
Date: Sat Nov 14 05:05:25 2015
EcryptfsInUse: Yes
ExecutablePath: /usr/bin/qemu-system-x86_64
InstallationDate: Installed on 2012-12-22 (1056 days ago)
InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 (20120823.1)
KvmCmdLine:
COMMAND STAT EUID RUID PID PPID %CPU COMMAND
kvm-irqfd-clean S< 0 0 497 2 0.0 [kvm-irqfd-clean]
MachineType: Hewlett-Packard HP Elite 7300 Series MT
ProcCmdline: qemu-system-x86_64 -machine ubuntu,accel=kvm -m 1024 -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-0-generic root=UUID=8905185c-9d82-498c-970c-6fdb9ee07c45 ro quiet splash zswap.enabled=1 crashkernel=384M-:128M vt.handoff=7
SegvAnalysis:
Segfault happened at: 0x7fecce94624f: movq (%rax),%mm0
PC (0x7fecce94624f) ok
source "(%rax)" (0x7fecb5f0e010) not located in a known VMA region (needed readable region)!
destination "%mm0" ok
SegvReason: reading unknown VMA
Signal: 11
SourcePackage: qemu
StacktraceTop:
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_LowerBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_UpperBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? ()
Title: qemu-system-x86_64 crashed with SIGSEGV in SDL_LowerBlit()
UpgradeStatus: Upgraded to xenial on 2013-06-19 (877 days ago)
UserGroups: adm cdrom dip gnunet kismet kvm libvirtd lpadmin plugdev sambashare sbuild sudo
dmi.bios.date: 05/18/2011
dmi.bios.vendor: AMI
dmi.bios.version: 7.05
dmi.board.name: 2AB5
dmi.board.vendor: PEGATRON CORPORATION
dmi.board.version: 1.01
dmi.chassis.asset.tag: CZC126149V
dmi.chassis.type: 3
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: dmi:bvnAMI:bvr7.05:bd05/18/2011:svnHewlett-Packard:pnHPElite7300SeriesMT:pvr1.01:rvnPEGATRONCORPORATION:rn2AB5:rvr1.01:cvnHewlett-Packard:ct3:cvr:
dmi.product.name: HP Elite 7300 Series MT
dmi.product.version: 1.01
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1516203/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Qemu-devel] [Bug 1516203] Re: qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
[not found] <20151114031613.12052.15656.malonedeb@chaenomeles.canonical.com>
2015-11-16 16:51 ` [Qemu-devel] [Bug 1516203] Re: qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy() Serge Hallyn
@ 2015-11-16 17:38 ` Kai Kasurinen
2015-11-16 20:41 ` Serge Hallyn
` (4 subsequent siblings)
6 siblings, 0 replies; 7+ messages in thread
From: Kai Kasurinen @ 2015-11-16 17:38 UTC (permalink / raw)
To: qemu-devel
ProcCmdline: qemu-system-x86_64 -machine ubuntu,accel=kvm -m 1024
-device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1516203
Title:
qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
Status in QEMU:
New
Status in qemu package in Ubuntu:
New
Bug description:
with -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProblemType: Crash
DistroRelease: Ubuntu 16.04
Package: qemu-system-x86 1:2.4+dfsg-4ubuntu2
ProcVersionSignature: Ubuntu 4.3.0-0.6-generic 4.3.0
Uname: Linux 4.3.0-0-generic x86_64
ApportVersion: 2.19.2-0ubuntu6
Architecture: amd64
CurrentDesktop: Unity
Date: Sat Nov 14 05:05:25 2015
EcryptfsInUse: Yes
ExecutablePath: /usr/bin/qemu-system-x86_64
InstallationDate: Installed on 2012-12-22 (1056 days ago)
InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 (20120823.1)
KvmCmdLine:
COMMAND STAT EUID RUID PID PPID %CPU COMMAND
kvm-irqfd-clean S< 0 0 497 2 0.0 [kvm-irqfd-clean]
MachineType: Hewlett-Packard HP Elite 7300 Series MT
ProcCmdline: qemu-system-x86_64 -machine ubuntu,accel=kvm -m 1024 -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-0-generic root=UUID=8905185c-9d82-498c-970c-6fdb9ee07c45 ro quiet splash zswap.enabled=1 crashkernel=384M-:128M vt.handoff=7
SegvAnalysis:
Segfault happened at: 0x7fecce94624f: movq (%rax),%mm0
PC (0x7fecce94624f) ok
source "(%rax)" (0x7fecb5f0e010) not located in a known VMA region (needed readable region)!
destination "%mm0" ok
SegvReason: reading unknown VMA
Signal: 11
SourcePackage: qemu
StacktraceTop:
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_LowerBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_UpperBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? ()
Title: qemu-system-x86_64 crashed with SIGSEGV in SDL_LowerBlit()
UpgradeStatus: Upgraded to xenial on 2013-06-19 (877 days ago)
UserGroups: adm cdrom dip gnunet kismet kvm libvirtd lpadmin plugdev sambashare sbuild sudo
dmi.bios.date: 05/18/2011
dmi.bios.vendor: AMI
dmi.bios.version: 7.05
dmi.board.name: 2AB5
dmi.board.vendor: PEGATRON CORPORATION
dmi.board.version: 1.01
dmi.chassis.asset.tag: CZC126149V
dmi.chassis.type: 3
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: dmi:bvnAMI:bvr7.05:bd05/18/2011:svnHewlett-Packard:pnHPElite7300SeriesMT:pvr1.01:rvnPEGATRONCORPORATION:rn2AB5:rvr1.01:cvnHewlett-Packard:ct3:cvr:
dmi.product.name: HP Elite 7300 Series MT
dmi.product.version: 1.01
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1516203/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Qemu-devel] [Bug 1516203] Re: qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
[not found] <20151114031613.12052.15656.malonedeb@chaenomeles.canonical.com>
2015-11-16 16:51 ` [Qemu-devel] [Bug 1516203] Re: qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy() Serge Hallyn
2015-11-16 17:38 ` Kai Kasurinen
@ 2015-11-16 20:41 ` Serge Hallyn
2015-11-17 0:41 ` Serge Hallyn
` (3 subsequent siblings)
6 siblings, 0 replies; 7+ messages in thread
From: Serge Hallyn @ 2015-11-16 20:41 UTC (permalink / raw)
To: qemu-devel
Thanks. (I thought I had upgraded my test system to xenial, but I
hadn't, so virtio-vga was not supported)
How far into the boot do you see this happening?
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1516203
Title:
qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
Status in QEMU:
New
Status in qemu package in Ubuntu:
New
Bug description:
with -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProblemType: Crash
DistroRelease: Ubuntu 16.04
Package: qemu-system-x86 1:2.4+dfsg-4ubuntu2
ProcVersionSignature: Ubuntu 4.3.0-0.6-generic 4.3.0
Uname: Linux 4.3.0-0-generic x86_64
ApportVersion: 2.19.2-0ubuntu6
Architecture: amd64
CurrentDesktop: Unity
Date: Sat Nov 14 05:05:25 2015
EcryptfsInUse: Yes
ExecutablePath: /usr/bin/qemu-system-x86_64
InstallationDate: Installed on 2012-12-22 (1056 days ago)
InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 (20120823.1)
KvmCmdLine:
COMMAND STAT EUID RUID PID PPID %CPU COMMAND
kvm-irqfd-clean S< 0 0 497 2 0.0 [kvm-irqfd-clean]
MachineType: Hewlett-Packard HP Elite 7300 Series MT
ProcCmdline: qemu-system-x86_64 -machine ubuntu,accel=kvm -m 1024 -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-0-generic root=UUID=8905185c-9d82-498c-970c-6fdb9ee07c45 ro quiet splash zswap.enabled=1 crashkernel=384M-:128M vt.handoff=7
SegvAnalysis:
Segfault happened at: 0x7fecce94624f: movq (%rax),%mm0
PC (0x7fecce94624f) ok
source "(%rax)" (0x7fecb5f0e010) not located in a known VMA region (needed readable region)!
destination "%mm0" ok
SegvReason: reading unknown VMA
Signal: 11
SourcePackage: qemu
StacktraceTop:
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_LowerBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_UpperBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? ()
Title: qemu-system-x86_64 crashed with SIGSEGV in SDL_LowerBlit()
UpgradeStatus: Upgraded to xenial on 2013-06-19 (877 days ago)
UserGroups: adm cdrom dip gnunet kismet kvm libvirtd lpadmin plugdev sambashare sbuild sudo
dmi.bios.date: 05/18/2011
dmi.bios.vendor: AMI
dmi.bios.version: 7.05
dmi.board.name: 2AB5
dmi.board.vendor: PEGATRON CORPORATION
dmi.board.version: 1.01
dmi.chassis.asset.tag: CZC126149V
dmi.chassis.type: 3
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: dmi:bvnAMI:bvr7.05:bd05/18/2011:svnHewlett-Packard:pnHPElite7300SeriesMT:pvr1.01:rvnPEGATRONCORPORATION:rn2AB5:rvr1.01:cvnHewlett-Packard:ct3:cvr:
dmi.product.name: HP Elite 7300 Series MT
dmi.product.version: 1.01
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1516203/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Qemu-devel] [Bug 1516203] Re: qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
[not found] <20151114031613.12052.15656.malonedeb@chaenomeles.canonical.com>
` (2 preceding siblings ...)
2015-11-16 20:41 ` Serge Hallyn
@ 2015-11-17 0:41 ` Serge Hallyn
2015-11-18 17:48 ` Chris J Arges
` (2 subsequent siblings)
6 siblings, 0 replies; 7+ messages in thread
From: Serge Hallyn @ 2015-11-17 0:41 UTC (permalink / raw)
To: qemu-devel
(Note I cannot reproduce this here)
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1516203
Title:
qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
Status in QEMU:
New
Status in qemu package in Ubuntu:
New
Bug description:
with -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProblemType: Crash
DistroRelease: Ubuntu 16.04
Package: qemu-system-x86 1:2.4+dfsg-4ubuntu2
ProcVersionSignature: Ubuntu 4.3.0-0.6-generic 4.3.0
Uname: Linux 4.3.0-0-generic x86_64
ApportVersion: 2.19.2-0ubuntu6
Architecture: amd64
CurrentDesktop: Unity
Date: Sat Nov 14 05:05:25 2015
EcryptfsInUse: Yes
ExecutablePath: /usr/bin/qemu-system-x86_64
InstallationDate: Installed on 2012-12-22 (1056 days ago)
InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 (20120823.1)
KvmCmdLine:
COMMAND STAT EUID RUID PID PPID %CPU COMMAND
kvm-irqfd-clean S< 0 0 497 2 0.0 [kvm-irqfd-clean]
MachineType: Hewlett-Packard HP Elite 7300 Series MT
ProcCmdline: qemu-system-x86_64 -machine ubuntu,accel=kvm -m 1024 -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-0-generic root=UUID=8905185c-9d82-498c-970c-6fdb9ee07c45 ro quiet splash zswap.enabled=1 crashkernel=384M-:128M vt.handoff=7
SegvAnalysis:
Segfault happened at: 0x7fecce94624f: movq (%rax),%mm0
PC (0x7fecce94624f) ok
source "(%rax)" (0x7fecb5f0e010) not located in a known VMA region (needed readable region)!
destination "%mm0" ok
SegvReason: reading unknown VMA
Signal: 11
SourcePackage: qemu
StacktraceTop:
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_LowerBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_UpperBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? ()
Title: qemu-system-x86_64 crashed with SIGSEGV in SDL_LowerBlit()
UpgradeStatus: Upgraded to xenial on 2013-06-19 (877 days ago)
UserGroups: adm cdrom dip gnunet kismet kvm libvirtd lpadmin plugdev sambashare sbuild sudo
dmi.bios.date: 05/18/2011
dmi.bios.vendor: AMI
dmi.bios.version: 7.05
dmi.board.name: 2AB5
dmi.board.vendor: PEGATRON CORPORATION
dmi.board.version: 1.01
dmi.chassis.asset.tag: CZC126149V
dmi.chassis.type: 3
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: dmi:bvnAMI:bvr7.05:bd05/18/2011:svnHewlett-Packard:pnHPElite7300SeriesMT:pvr1.01:rvnPEGATRONCORPORATION:rn2AB5:rvr1.01:cvnHewlett-Packard:ct3:cvr:
dmi.product.name: HP Elite 7300 Series MT
dmi.product.version: 1.01
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1516203/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Qemu-devel] [Bug 1516203] Re: qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
[not found] <20151114031613.12052.15656.malonedeb@chaenomeles.canonical.com>
` (3 preceding siblings ...)
2015-11-17 0:41 ` Serge Hallyn
@ 2015-11-18 17:48 ` Chris J Arges
2015-11-18 19:43 ` Serge Hallyn
2015-11-18 20:10 ` Kai Kasurinen
6 siblings, 0 replies; 7+ messages in thread
From: Chris J Arges @ 2015-11-18 17:48 UTC (permalink / raw)
To: qemu-devel
Can you please test with the 4.2.0-19.23 kernel on Xenial as well?
Thanks
** Changed in: qemu (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1516203
Title:
qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
Status in QEMU:
New
Status in qemu package in Ubuntu:
Incomplete
Bug description:
with -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProblemType: Crash
DistroRelease: Ubuntu 16.04
Package: qemu-system-x86 1:2.4+dfsg-4ubuntu2
ProcVersionSignature: Ubuntu 4.3.0-0.6-generic 4.3.0
Uname: Linux 4.3.0-0-generic x86_64
ApportVersion: 2.19.2-0ubuntu6
Architecture: amd64
CurrentDesktop: Unity
Date: Sat Nov 14 05:05:25 2015
EcryptfsInUse: Yes
ExecutablePath: /usr/bin/qemu-system-x86_64
InstallationDate: Installed on 2012-12-22 (1056 days ago)
InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 (20120823.1)
KvmCmdLine:
COMMAND STAT EUID RUID PID PPID %CPU COMMAND
kvm-irqfd-clean S< 0 0 497 2 0.0 [kvm-irqfd-clean]
MachineType: Hewlett-Packard HP Elite 7300 Series MT
ProcCmdline: qemu-system-x86_64 -machine ubuntu,accel=kvm -m 1024 -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-0-generic root=UUID=8905185c-9d82-498c-970c-6fdb9ee07c45 ro quiet splash zswap.enabled=1 crashkernel=384M-:128M vt.handoff=7
SegvAnalysis:
Segfault happened at: 0x7fecce94624f: movq (%rax),%mm0
PC (0x7fecce94624f) ok
source "(%rax)" (0x7fecb5f0e010) not located in a known VMA region (needed readable region)!
destination "%mm0" ok
SegvReason: reading unknown VMA
Signal: 11
SourcePackage: qemu
StacktraceTop:
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_LowerBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_UpperBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? ()
Title: qemu-system-x86_64 crashed with SIGSEGV in SDL_LowerBlit()
UpgradeStatus: Upgraded to xenial on 2013-06-19 (877 days ago)
UserGroups: adm cdrom dip gnunet kismet kvm libvirtd lpadmin plugdev sambashare sbuild sudo
dmi.bios.date: 05/18/2011
dmi.bios.vendor: AMI
dmi.bios.version: 7.05
dmi.board.name: 2AB5
dmi.board.vendor: PEGATRON CORPORATION
dmi.board.version: 1.01
dmi.chassis.asset.tag: CZC126149V
dmi.chassis.type: 3
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: dmi:bvnAMI:bvr7.05:bd05/18/2011:svnHewlett-Packard:pnHPElite7300SeriesMT:pvr1.01:rvnPEGATRONCORPORATION:rn2AB5:rvr1.01:cvnHewlett-Packard:ct3:cvr:
dmi.product.name: HP Elite 7300 Series MT
dmi.product.version: 1.01
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1516203/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Qemu-devel] [Bug 1516203] Re: qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
[not found] <20151114031613.12052.15656.malonedeb@chaenomeles.canonical.com>
` (4 preceding siblings ...)
2015-11-18 17:48 ` Chris J Arges
@ 2015-11-18 19:43 ` Serge Hallyn
2015-11-18 20:10 ` Kai Kasurinen
6 siblings, 0 replies; 7+ messages in thread
From: Serge Hallyn @ 2015-11-18 19:43 UTC (permalink / raw)
To: qemu-devel
Do other iso's, like http://archive.ubuntu.com/ubuntu/dists/wily/main
/installer-amd64/current/images/netboot/mini.iso also cause this for
you?
(I ran with upstream qemu GIT HEAD using that iso and was unable to
reproduce)
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1516203
Title:
qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
Status in QEMU:
New
Status in qemu package in Ubuntu:
Incomplete
Bug description:
with -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProblemType: Crash
DistroRelease: Ubuntu 16.04
Package: qemu-system-x86 1:2.4+dfsg-4ubuntu2
ProcVersionSignature: Ubuntu 4.3.0-0.6-generic 4.3.0
Uname: Linux 4.3.0-0-generic x86_64
ApportVersion: 2.19.2-0ubuntu6
Architecture: amd64
CurrentDesktop: Unity
Date: Sat Nov 14 05:05:25 2015
EcryptfsInUse: Yes
ExecutablePath: /usr/bin/qemu-system-x86_64
InstallationDate: Installed on 2012-12-22 (1056 days ago)
InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 (20120823.1)
KvmCmdLine:
COMMAND STAT EUID RUID PID PPID %CPU COMMAND
kvm-irqfd-clean S< 0 0 497 2 0.0 [kvm-irqfd-clean]
MachineType: Hewlett-Packard HP Elite 7300 Series MT
ProcCmdline: qemu-system-x86_64 -machine ubuntu,accel=kvm -m 1024 -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-0-generic root=UUID=8905185c-9d82-498c-970c-6fdb9ee07c45 ro quiet splash zswap.enabled=1 crashkernel=384M-:128M vt.handoff=7
SegvAnalysis:
Segfault happened at: 0x7fecce94624f: movq (%rax),%mm0
PC (0x7fecce94624f) ok
source "(%rax)" (0x7fecb5f0e010) not located in a known VMA region (needed readable region)!
destination "%mm0" ok
SegvReason: reading unknown VMA
Signal: 11
SourcePackage: qemu
StacktraceTop:
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_LowerBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_UpperBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? ()
Title: qemu-system-x86_64 crashed with SIGSEGV in SDL_LowerBlit()
UpgradeStatus: Upgraded to xenial on 2013-06-19 (877 days ago)
UserGroups: adm cdrom dip gnunet kismet kvm libvirtd lpadmin plugdev sambashare sbuild sudo
dmi.bios.date: 05/18/2011
dmi.bios.vendor: AMI
dmi.bios.version: 7.05
dmi.board.name: 2AB5
dmi.board.vendor: PEGATRON CORPORATION
dmi.board.version: 1.01
dmi.chassis.asset.tag: CZC126149V
dmi.chassis.type: 3
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: dmi:bvnAMI:bvr7.05:bd05/18/2011:svnHewlett-Packard:pnHPElite7300SeriesMT:pvr1.01:rvnPEGATRONCORPORATION:rn2AB5:rvr1.01:cvnHewlett-Packard:ct3:cvr:
dmi.product.name: HP Elite 7300 Series MT
dmi.product.version: 1.01
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1516203/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Qemu-devel] [Bug 1516203] Re: qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
[not found] <20151114031613.12052.15656.malonedeb@chaenomeles.canonical.com>
` (5 preceding siblings ...)
2015-11-18 19:43 ` Serge Hallyn
@ 2015-11-18 20:10 ` Kai Kasurinen
6 siblings, 0 replies; 7+ messages in thread
From: Kai Kasurinen @ 2015-11-18 20:10 UTC (permalink / raw)
To: qemu-devel
No time to debug, invaliding...
** Changed in: qemu (Ubuntu)
Status: Incomplete => Invalid
** Information type changed from Public to Private
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1516203
Title:
qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy()
Status in QEMU:
New
Status in qemu package in Ubuntu:
Invalid
Bug description:
with -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProblemType: Crash
DistroRelease: Ubuntu 16.04
Package: qemu-system-x86 1:2.4+dfsg-4ubuntu2
ProcVersionSignature: Ubuntu 4.3.0-0.6-generic 4.3.0
Uname: Linux 4.3.0-0-generic x86_64
ApportVersion: 2.19.2-0ubuntu6
Architecture: amd64
CurrentDesktop: Unity
Date: Sat Nov 14 05:05:25 2015
EcryptfsInUse: Yes
ExecutablePath: /usr/bin/qemu-system-x86_64
InstallationDate: Installed on 2012-12-22 (1056 days ago)
InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 (20120823.1)
KvmCmdLine:
COMMAND STAT EUID RUID PID PPID %CPU COMMAND
kvm-irqfd-clean S< 0 0 497 2 0.0 [kvm-irqfd-clean]
MachineType: Hewlett-Packard HP Elite 7300 Series MT
ProcCmdline: qemu-system-x86_64 -machine ubuntu,accel=kvm -m 1024 -device virtio-vga -cdrom ubuntu-15.10-desktop-amd64.iso
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-0-generic root=UUID=8905185c-9d82-498c-970c-6fdb9ee07c45 ro quiet splash zswap.enabled=1 crashkernel=384M-:128M vt.handoff=7
SegvAnalysis:
Segfault happened at: 0x7fecce94624f: movq (%rax),%mm0
PC (0x7fecce94624f) ok
source "(%rax)" (0x7fecb5f0e010) not located in a known VMA region (needed readable region)!
destination "%mm0" ok
SegvReason: reading unknown VMA
Signal: 11
SourcePackage: qemu
StacktraceTop:
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_LowerBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
SDL_UpperBlit () from /usr/lib/x86_64-linux-gnu/libSDL-1.2.so.0
?? ()
Title: qemu-system-x86_64 crashed with SIGSEGV in SDL_LowerBlit()
UpgradeStatus: Upgraded to xenial on 2013-06-19 (877 days ago)
UserGroups: adm cdrom dip gnunet kismet kvm libvirtd lpadmin plugdev sambashare sbuild sudo
dmi.bios.date: 05/18/2011
dmi.bios.vendor: AMI
dmi.bios.version: 7.05
dmi.board.name: 2AB5
dmi.board.vendor: PEGATRON CORPORATION
dmi.board.version: 1.01
dmi.chassis.asset.tag: CZC126149V
dmi.chassis.type: 3
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: dmi:bvnAMI:bvr7.05:bd05/18/2011:svnHewlett-Packard:pnHPElite7300SeriesMT:pvr1.01:rvnPEGATRONCORPORATION:rn2AB5:rvr1.01:cvnHewlett-Packard:ct3:cvr:
dmi.product.name: HP Elite 7300 Series MT
dmi.product.version: 1.01
dmi.sys.vendor: Hewlett-Packard
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1516203/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-11-18 20:15 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20151114031613.12052.15656.malonedeb@chaenomeles.canonical.com>
2015-11-16 16:51 ` [Qemu-devel] [Bug 1516203] Re: qemu-system-x86_64 crashed with SIGSEGV in SDL_BlitCopy() Serge Hallyn
2015-11-16 17:38 ` Kai Kasurinen
2015-11-16 20:41 ` Serge Hallyn
2015-11-17 0:41 ` Serge Hallyn
2015-11-18 17:48 ` Chris J Arges
2015-11-18 19:43 ` Serge Hallyn
2015-11-18 20:10 ` Kai Kasurinen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.