* [PATCH] ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
@ 2015-11-01 23:29 Marek Vasut
2015-11-18 9:50 ` Marek Vasut
2015-11-19 8:22 ` Steffen Trumtrar
0 siblings, 2 replies; 6+ messages in thread
From: Marek Vasut @ 2015-11-01 23:29 UTC (permalink / raw)
To: linux-arm-kernel
Add support for the DENX MCV SoM and MCVEVK baseboard. The SoM contains
eMMC, DRAM, Altera Cyclone V SoC. The baseboard contains CAN ports, UART
ports, STMPE811 touchscreen controller, USB OTG port, ethernet port and
a lot of IO pins.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Vince Bridgers <vbridgers2013@gmail.com>
Cc: Alan Tull <atull@altera.com>
Cc: Thor Thayer <tthayer@altera.com>
Cc: Dinh Nguyen <dinguyen@altear.com>
Cc: Olof Johansson <olof@lixom.net>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi | 33 ++++++++++
arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts | 94 +++++++++++++++++++++++++++
3 files changed, 128 insertions(+)
create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7d3e495..8f322be 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -555,6 +555,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
+ socfpga_cyclone5_mcvevk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_de0_sockit.dtb \
socfpga_cyclone5_sockit.dtb \
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
new file mode 100644
index 0000000..70dacf3
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "DENX MCV";
+ compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1 GiB */
+ };
+};
+
+&mmc0 { /* On-SoM eMMC */
+ bus-width = <8>;
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
new file mode 100644
index 0000000..7cbe9b3
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5_mcv.dtsi"
+
+/ {
+ model = "DENX MCV EVK";
+ compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+ aliases {
+ ethernet0 = &gmac0;
+ stmpe-i2c0 = &stmpe1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&gpio0 { /* GPIO 0 ... 28 */
+ status = "okay";
+};
+
+&gpio1 { /* GPIO 29 ... 57 */
+ status = "okay";
+};
+
+&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+ status = "okay";
+};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ speed-mode = <0>;
+
+ stmpe1: stmpe811 at 41 {
+ compatible = "st,stmpe811";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ id = <0>;
+ blocks = <0x5>;
+ irq-gpio = <&portb 28 0x4>; /* GPIO 57, trig. level HI */
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ reg = <0>;
+ ts,sample-time = <4>;
+ ts,mod-12b = <1>;
+ ts,ref-sel = <0>;
+ ts,adc-freq = <1>;
+ ts,ave-ctrl = <1>;
+ ts,touch-det-delay = <3>;
+ ts,settling = <4>;
+ ts,fraction-z = <7>;
+ ts,i-drive = <1>;
+ };
+ };
+};
+
+&gmac0 {
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
--
2.1.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
2015-11-01 23:29 [PATCH] ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard Marek Vasut
@ 2015-11-18 9:50 ` Marek Vasut
2015-11-19 15:57 ` Dinh Nguyen
2015-11-19 8:22 ` Steffen Trumtrar
1 sibling, 1 reply; 6+ messages in thread
From: Marek Vasut @ 2015-11-18 9:50 UTC (permalink / raw)
To: linux-arm-kernel
On Monday, November 02, 2015 at 12:29:09 AM, Marek Vasut wrote:
> Add support for the DENX MCV SoM and MCVEVK baseboard. The SoM contains
> eMMC, DRAM, Altera Cyclone V SoC. The baseboard contains CAN ports, UART
> ports, STMPE811 touchscreen controller, USB OTG port, ethernet port and
> a lot of IO pins.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Vince Bridgers <vbridgers2013@gmail.com>
> Cc: Alan Tull <atull@altera.com>
> Cc: Thor Thayer <tthayer@altera.com>
> Cc: Dinh Nguyen <dinguyen@altear.com>
> Cc: Olof Johansson <olof@lixom.net>
Hi,
since the rc1 is out, can someone please look at this patch ?
btw. the consensus is, that it's preferred if contributors submit patches
between rc1-rc5, right?
Thanks!
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi | 33 ++++++++++
> arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts | 94
> +++++++++++++++++++++++++++ 3 files changed, 128 insertions(+)
> create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
> create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 7d3e495..8f322be 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -555,6 +555,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
> dtb-$(CONFIG_ARCH_SOCFPGA) += \
> socfpga_arria5_socdk.dtb \
> socfpga_arria10_socdk_sdmmc.dtb \
> + socfpga_cyclone5_mcvevk.dtb \
> socfpga_cyclone5_socdk.dtb \
> socfpga_cyclone5_de0_sockit.dtb \
> socfpga_cyclone5_sockit.dtb \
> diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
> b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi new file mode 100644
> index 0000000..70dacf3
> --- /dev/null
> +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
> @@ -0,0 +1,33 @@
> +/*
> + * Copyright (C) 2015 Marek Vasut <marex@denx.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "socfpga_cyclone5.dtsi"
> +
> +/ {
> + model = "DENX MCV";
> + compatible = "altr,socfpga-cyclone5", "altr,socfpga";
> +
> + memory {
> + name = "memory";
> + device_type = "memory";
> + reg = <0x0 0x40000000>; /* 1 GiB */
> + };
> +};
> +
> +&mmc0 { /* On-SoM eMMC */
> + bus-width = <8>;
> +};
> diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
> b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts new file mode 100644
> index 0000000..7cbe9b3
> --- /dev/null
> +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
> @@ -0,0 +1,94 @@
> +/*
> + * Copyright (C) 2015 Marek Vasut <marex@denx.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "socfpga_cyclone5_mcv.dtsi"
> +
> +/ {
> + model = "DENX MCV EVK";
> + compatible = "altr,socfpga-cyclone5", "altr,socfpga";
> +
> + aliases {
> + ethernet0 = &gmac0;
> + stmpe-i2c0 = &stmpe1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&gpio0 { /* GPIO 0 ... 28 */
> + status = "okay";
> +};
> +
> +&gpio1 { /* GPIO 29 ... 57 */
> + status = "okay";
> +};
> +
> +&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
> + status = "okay";
> +};
> +
> +&can0 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> + speed-mode = <0>;
> +
> + stmpe1: stmpe811 at 41 {
> + compatible = "st,stmpe811";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x41>;
> + id = <0>;
> + blocks = <0x5>;
> + irq-gpio = <&portb 28 0x4>; /* GPIO 57, trig. level HI */
> +
> + stmpe_touchscreen {
> + compatible = "st,stmpe-ts";
> + reg = <0>;
> + ts,sample-time = <4>;
> + ts,mod-12b = <1>;
> + ts,ref-sel = <0>;
> + ts,adc-freq = <1>;
> + ts,ave-ctrl = <1>;
> + ts,touch-det-delay = <3>;
> + ts,settling = <4>;
> + ts,fraction-z = <7>;
> + ts,i-drive = <1>;
> + };
> + };
> +};
> +
> +&gmac0 {
> + phy-mode = "rgmii";
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
2015-11-01 23:29 [PATCH] ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard Marek Vasut
2015-11-18 9:50 ` Marek Vasut
@ 2015-11-19 8:22 ` Steffen Trumtrar
2015-11-19 14:41 ` Marek Vasut
1 sibling, 1 reply; 6+ messages in thread
From: Steffen Trumtrar @ 2015-11-19 8:22 UTC (permalink / raw)
To: linux-arm-kernel
Hi!
On Mon, Nov 02, 2015 at 12:29:09AM +0100, Marek Vasut wrote:
> Add support for the DENX MCV SoM and MCVEVK baseboard. The SoM contains
> eMMC, DRAM, Altera Cyclone V SoC. The baseboard contains CAN ports, UART
> ports, STMPE811 touchscreen controller, USB OTG port, ethernet port and
> a lot of IO pins.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Vince Bridgers <vbridgers2013@gmail.com>
> Cc: Alan Tull <atull@altera.com>
> Cc: Thor Thayer <tthayer@altera.com>
> Cc: Dinh Nguyen <dinguyen@altear.com>
> Cc: Olof Johansson <olof@lixom.net>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi | 33 ++++++++++
> arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts | 94 +++++++++++++++++++++++++++
> 3 files changed, 128 insertions(+)
> create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
> create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 7d3e495..8f322be 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -555,6 +555,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
> dtb-$(CONFIG_ARCH_SOCFPGA) += \
> socfpga_arria5_socdk.dtb \
> socfpga_arria10_socdk_sdmmc.dtb \
> + socfpga_cyclone5_mcvevk.dtb \
> socfpga_cyclone5_socdk.dtb \
> socfpga_cyclone5_de0_sockit.dtb \
> socfpga_cyclone5_sockit.dtb \
> diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
> new file mode 100644
> index 0000000..70dacf3
> --- /dev/null
> +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
> @@ -0,0 +1,33 @@
> +/*
> + * Copyright (C) 2015 Marek Vasut <marex@denx.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "socfpga_cyclone5.dtsi"
> +
> +/ {
> + model = "DENX MCV";
> + compatible = "altr,socfpga-cyclone5", "altr,socfpga";
> +
> + memory {
> + name = "memory";
> + device_type = "memory";
> + reg = <0x0 0x40000000>; /* 1 GiB */
> + };
> +};
> +
> +&mmc0 { /* On-SoM eMMC */
> + bus-width = <8>;
> +};
> diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
> new file mode 100644
> index 0000000..7cbe9b3
> --- /dev/null
> +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
> @@ -0,0 +1,94 @@
> +/*
> + * Copyright (C) 2015 Marek Vasut <marex@denx.de>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "socfpga_cyclone5_mcv.dtsi"
> +
> +/ {
> + model = "DENX MCV EVK";
> + compatible = "altr,socfpga-cyclone5", "altr,socfpga";
> +
> + aliases {
> + ethernet0 = &gmac0;
> + stmpe-i2c0 = &stmpe1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&gpio0 { /* GPIO 0 ... 28 */
> + status = "okay";
> +};
> +
> +&gpio1 { /* GPIO 29 ... 57 */
> + status = "okay";
> +};
> +
> +&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
> + status = "okay";
> +};
> +
> +&can0 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> + speed-mode = <0>;
> +
> + stmpe1: stmpe811 at 41 {
> + compatible = "st,stmpe811";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x41>;
> + id = <0>;
> + blocks = <0x5>;
> + irq-gpio = <&portb 28 0x4>; /* GPIO 57, trig. level HI */
> +
> + stmpe_touchscreen {
> + compatible = "st,stmpe-ts";
> + reg = <0>;
> + ts,sample-time = <4>;
> + ts,mod-12b = <1>;
> + ts,ref-sel = <0>;
> + ts,adc-freq = <1>;
> + ts,ave-ctrl = <1>;
> + ts,touch-det-delay = <3>;
> + ts,settling = <4>;
> + ts,fraction-z = <7>;
> + ts,i-drive = <1>;
> + };
> + };
> +};
> +
> +&gmac0 {
> + phy-mode = "rgmii";
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
Could you please sort the nodes alphabetically? I guess the risk of merge conflicts
is pretty low as this seems to be a complete description of the hardware, but I would
still prefer it that way.
Otherwise:
Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Regards,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
2015-11-19 8:22 ` Steffen Trumtrar
@ 2015-11-19 14:41 ` Marek Vasut
0 siblings, 0 replies; 6+ messages in thread
From: Marek Vasut @ 2015-11-19 14:41 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday, November 19, 2015 at 09:22:46 AM, Steffen Trumtrar wrote:
> Hi!
Hi!
> On Mon, Nov 02, 2015 at 12:29:09AM +0100, Marek Vasut wrote:
> > Add support for the DENX MCV SoM and MCVEVK baseboard. The SoM contains
> > eMMC, DRAM, Altera Cyclone V SoC. The baseboard contains CAN ports, UART
> > ports, STMPE811 touchscreen controller, USB OTG port, ethernet port and
> > a lot of IO pins.
> >
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Vince Bridgers <vbridgers2013@gmail.com>
> > Cc: Alan Tull <atull@altera.com>
> > Cc: Thor Thayer <tthayer@altera.com>
> > Cc: Dinh Nguyen <dinguyen@altear.com>
> > Cc: Olof Johansson <olof@lixom.net>
> > ---
> >
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi | 33 ++++++++++
> > arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts | 94
> > +++++++++++++++++++++++++++ 3 files changed, 128 insertions(+)
> > create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
> > create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 7d3e495..8f322be 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -555,6 +555,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
> >
> > dtb-$(CONFIG_ARCH_SOCFPGA) += \
> >
> > socfpga_arria5_socdk.dtb \
> > socfpga_arria10_socdk_sdmmc.dtb \
> >
> > + socfpga_cyclone5_mcvevk.dtb \
> >
> > socfpga_cyclone5_socdk.dtb \
> > socfpga_cyclone5_de0_sockit.dtb \
> > socfpga_cyclone5_sockit.dtb \
> >
> > diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
> > b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi new file mode 100644
> > index 0000000..70dacf3
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
> > @@ -0,0 +1,33 @@
> > +/*
> > + * Copyright (C) 2015 Marek Vasut <marex@denx.de>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#include "socfpga_cyclone5.dtsi"
> > +
> > +/ {
> > + model = "DENX MCV";
> > + compatible = "altr,socfpga-cyclone5", "altr,socfpga";
> > +
> > + memory {
> > + name = "memory";
> > + device_type = "memory";
> > + reg = <0x0 0x40000000>; /* 1 GiB */
> > + };
> > +};
> > +
> > +&mmc0 { /* On-SoM eMMC */
> > + bus-width = <8>;
> > +};
> > diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
> > b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts new file mode 100644
> > index 0000000..7cbe9b3
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
> > @@ -0,0 +1,94 @@
> > +/*
> > + * Copyright (C) 2015 Marek Vasut <marex@denx.de>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#include "socfpga_cyclone5_mcv.dtsi"
> > +
> > +/ {
> > + model = "DENX MCV EVK";
> > + compatible = "altr,socfpga-cyclone5", "altr,socfpga";
> > +
> > + aliases {
> > + ethernet0 = &gmac0;
> > + stmpe-i2c0 = &stmpe1;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +};
> > +
> > +&gpio0 { /* GPIO 0 ... 28 */
> > + status = "okay";
> > +};
> > +
> > +&gpio1 { /* GPIO 29 ... 57 */
> > + status = "okay";
> > +};
> > +
> > +&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
> > + status = "okay";
> > +};
> > +
> > +&can0 {
> > + status = "okay";
> > +};
> > +
> > +&can1 {
> > + status = "okay";
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > + speed-mode = <0>;
> > +
> > + stmpe1: stmpe811 at 41 {
> > + compatible = "st,stmpe811";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x41>;
> > + id = <0>;
> > + blocks = <0x5>;
> > + irq-gpio = <&portb 28 0x4>; /* GPIO 57, trig. level HI */
> > +
> > + stmpe_touchscreen {
> > + compatible = "st,stmpe-ts";
> > + reg = <0>;
> > + ts,sample-time = <4>;
> > + ts,mod-12b = <1>;
> > + ts,ref-sel = <0>;
> > + ts,adc-freq = <1>;
> > + ts,ave-ctrl = <1>;
> > + ts,touch-det-delay = <3>;
> > + ts,settling = <4>;
> > + ts,fraction-z = <7>;
> > + ts,i-drive = <1>;
> > + };
> > + };
> > +};
> > +
> > +&gmac0 {
> > + phy-mode = "rgmii";
> > + status = "okay";
> > +};
> > +
> > +&uart0 {
> > + status = "okay";
> > +};
> > +
> > +&usb1 {
> > + status = "okay";
> > +};
>
> Could you please sort the nodes alphabetically? I guess the risk of merge
> conflicts is pretty low as this seems to be a complete description of the
> hardware, but I would still prefer it that way.
>
> Otherwise:
>
> Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Done and reposted, thanks for the review!
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
2015-11-18 9:50 ` Marek Vasut
@ 2015-11-19 15:57 ` Dinh Nguyen
2015-11-19 16:00 ` Marek Vasut
0 siblings, 1 reply; 6+ messages in thread
From: Dinh Nguyen @ 2015-11-19 15:57 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 18, 2015 at 3:50 AM, Marek Vasut <marex@denx.de> wrote:
> On Monday, November 02, 2015 at 12:29:09 AM, Marek Vasut wrote:
>> Add support for the DENX MCV SoM and MCVEVK baseboard. The SoM contains
>> eMMC, DRAM, Altera Cyclone V SoC. The baseboard contains CAN ports, UART
>> ports, STMPE811 touchscreen controller, USB OTG port, ethernet port and
>> a lot of IO pins.
>>
>> Signed-off-by: Marek Vasut <marex@denx.de>
>> Cc: Vince Bridgers <vbridgers2013@gmail.com>
>> Cc: Alan Tull <atull@altera.com>
>> Cc: Thor Thayer <tthayer@altera.com>
>> Cc: Dinh Nguyen <dinguyen@altear.com>
Please use dinguyen at opensource.altera.com in your V2.
>> Cc: Olof Johansson <olof@lixom.net>
>
Dinh
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
2015-11-19 15:57 ` Dinh Nguyen
@ 2015-11-19 16:00 ` Marek Vasut
0 siblings, 0 replies; 6+ messages in thread
From: Marek Vasut @ 2015-11-19 16:00 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday, November 19, 2015 at 04:57:01 PM, Dinh Nguyen wrote:
> On Wed, Nov 18, 2015 at 3:50 AM, Marek Vasut <marex@denx.de> wrote:
> > On Monday, November 02, 2015 at 12:29:09 AM, Marek Vasut wrote:
> >> Add support for the DENX MCV SoM and MCVEVK baseboard. The SoM contains
> >> eMMC, DRAM, Altera Cyclone V SoC. The baseboard contains CAN ports, UART
> >> ports, STMPE811 touchscreen controller, USB OTG port, ethernet port and
> >> a lot of IO pins.
> >>
> >> Signed-off-by: Marek Vasut <marex@denx.de>
> >> Cc: Vince Bridgers <vbridgers2013@gmail.com>
> >> Cc: Alan Tull <atull@altera.com>
> >> Cc: Thor Thayer <tthayer@altera.com>
> >> Cc: Dinh Nguyen <dinguyen@altear.com>
>
> Please use dinguyen at opensource.altera.com in your V2.
Uh, sorry, must've been a copy-paste mistake from some other patch.
I already posted the V2, but if there's a need for V3, will keep that in mind.
> >> Cc: Olof Johansson <olof@lixom.net>
>
> Dinh
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-11-19 16:00 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-01 23:29 [PATCH] ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard Marek Vasut
2015-11-18 9:50 ` Marek Vasut
2015-11-19 15:57 ` Dinh Nguyen
2015-11-19 16:00 ` Marek Vasut
2015-11-19 8:22 ` Steffen Trumtrar
2015-11-19 14:41 ` Marek Vasut
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.