[patch net-next 0/3] mlxsw: small driver update

[patch net-next 0/3] mlxsw: small driver update

[Jiri Pirko]

From: Jiri Pirko <jiri@mellanox.com>

Couple of VLAN-related patches.

Ido Schimmel (3):
  mlxsw: spectrum: Use correct PVID value when removing VLANs
  mlxsw: spectrum: Unify setting of HW VLAN filters
  mlxsw: spectrum: Add error paths to __mlxsw_sp_port_vlans_add

 .../ethernet/mellanox/mlxsw/spectrum_switchdev.c   | 129 ++++++++++++++-------
 1 file changed, 84 insertions(+), 45 deletions(-)

-- 
1.9.3

[patch net-next 1/3] mlxsw: spectrum: Use correct PVID value when removing VLANs

[Jiri Pirko]

From: Ido Schimmel <idosch@mellanox.com>

When removing a range of VLANs in which PVID is a member we should use
the correct PVID value instead of some VLAN in the range.

Also, change two print statements to use 'dev' instead of
'mlxsw_sp_port->dev', as it's already used in other print statements in
the function.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
---
 .../net/ethernet/mellanox/mlxsw/spectrum_switchdev.c   | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index 617fb22..be63398 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -532,7 +532,7 @@ static int __mlxsw_sp_port_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port,
 				     u16 vid_begin, u16 vid_end, bool init)
 {
 	struct net_device *dev = mlxsw_sp_port->dev;
-	u16 vid, vid_e;
+	u16 vid, vid_e, pvid;
 	int err;
 
 	/* In case this is invoked with BRIDGE_FLAGS_SELF and port is
@@ -549,23 +549,21 @@ static int __mlxsw_sp_port_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port,
 		err = mlxsw_sp_port_vlan_set(mlxsw_sp_port, vid, vid_e, false,
 					     false);
 		if (err) {
-			netdev_err(mlxsw_sp_port->dev, "Unable to del VIDs %d-%d\n",
-				   vid, vid_e);
+			netdev_err(dev, "Unable to del VIDs %d-%d\n", vid,
+				   vid_e);
 			return err;
 		}
 	}
 
-	if ((mlxsw_sp_port->pvid >= vid_begin) &&
-	    (mlxsw_sp_port->pvid <= vid_end)) {
+	pvid = mlxsw_sp_port->pvid;
+	if (pvid >= vid_begin && pvid <= vid_end && pvid != 1) {
 		/* Default VLAN is always 1 */
-		mlxsw_sp_port->pvid = 1;
-		err = mlxsw_sp_port_pvid_set(mlxsw_sp_port,
-					     mlxsw_sp_port->pvid);
+		err = mlxsw_sp_port_pvid_set(mlxsw_sp_port, 1);
 		if (err) {
-			netdev_err(mlxsw_sp_port->dev, "Unable to del PVID %d\n",
-				   vid);
+			netdev_err(dev, "Unable to del PVID %d\n", pvid);
 			return err;
 		}
+		mlxsw_sp_port->pvid = 1;
 	}
 
 	if (init)
-- 
1.9.3

[patch net-next 2/3] mlxsw: spectrum: Unify setting of HW VLAN filters

[Jiri Pirko]

From: Ido Schimmel <idosch@mellanox.com>

When adding or deleting VLANs from a bridged port, HW VLAN filters must be
set accordingly. Instead of having the same code in both add and delete
functions, just wrap it in a function and call it with the appropriate
parameters.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
---
 .../ethernet/mellanox/mlxsw/spectrum_switchdev.c   | 58 +++++++++++++---------
 1 file changed, 34 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index be63398..fe88165 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -342,6 +342,27 @@ err_port_add_vid:
 	return err;
 }
 
+static int __mlxsw_sp_port_vlans_set(struct mlxsw_sp_port *mlxsw_sp_port,
+				     u16 vid_begin, u16 vid_end, bool is_member,
+				     bool untagged)
+{
+	u16 vid, vid_e;
+	int err;
+
+	for (vid = vid_begin; vid <= vid_end;
+	     vid += MLXSW_REG_SPVM_REC_MAX_COUNT) {
+		vid_e = min((u16) (vid + MLXSW_REG_SPVM_REC_MAX_COUNT - 1),
+			    vid_end);
+
+		err = mlxsw_sp_port_vlan_set(mlxsw_sp_port, vid, vid_e,
+					     is_member, untagged);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
 static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port *mlxsw_sp_port,
 				     u16 vid_begin, u16 vid_end,
 				     bool flag_untagged, bool flag_pvid)
@@ -396,18 +417,12 @@ static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port *mlxsw_sp_port,
 		return err;
 	}
 
-	for (vid = vid_begin; vid <= vid_end;
-	     vid += MLXSW_REG_SPVM_REC_MAX_COUNT) {
-		vid_e = min((u16) (vid + MLXSW_REG_SPVM_REC_MAX_COUNT - 1),
-			    vid_end);
-
-		err = mlxsw_sp_port_vlan_set(mlxsw_sp_port, vid, vid_e, true,
-					     flag_untagged);
-		if (err) {
-			netdev_err(mlxsw_sp_port->dev, "Unable to add VIDs %d-%d\n",
-				   vid, vid_e);
-			return err;
-		}
+	err = __mlxsw_sp_port_vlans_set(mlxsw_sp_port, vid_begin, vid_end,
+					true, flag_untagged);
+	if (err) {
+		netdev_err(dev, "Unable to add VIDs %d-%d\n", vid_begin,
+			   vid_end);
+		return err;
 	}
 
 	vid = vid_begin;
@@ -532,7 +547,7 @@ static int __mlxsw_sp_port_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port,
 				     u16 vid_begin, u16 vid_end, bool init)
 {
 	struct net_device *dev = mlxsw_sp_port->dev;
-	u16 vid, vid_e, pvid;
+	u16 vid, pvid;
 	int err;
 
 	/* In case this is invoked with BRIDGE_FLAGS_SELF and port is
@@ -542,17 +557,12 @@ static int __mlxsw_sp_port_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port,
 	if (!init && !mlxsw_sp_port->bridged)
 		return mlxsw_sp_port_kill_vids(dev, vid_begin, vid_end);
 
-	for (vid = vid_begin; vid <= vid_end;
-	     vid += MLXSW_REG_SPVM_REC_MAX_COUNT) {
-		vid_e = min((u16) (vid + MLXSW_REG_SPVM_REC_MAX_COUNT - 1),
-			    vid_end);
-		err = mlxsw_sp_port_vlan_set(mlxsw_sp_port, vid, vid_e, false,
-					     false);
-		if (err) {
-			netdev_err(dev, "Unable to del VIDs %d-%d\n", vid,
-				   vid_e);
-			return err;
-		}
+	err = __mlxsw_sp_port_vlans_set(mlxsw_sp_port, vid_begin, vid_end,
+					false, false);
+	if (err) {
+		netdev_err(dev, "Unable to del VIDs %d-%d\n", vid_begin,
+			   vid_end);
+		return err;
 	}
 
 	pvid = mlxsw_sp_port->pvid;
-- 
1.9.3

[patch net-next 3/3] mlxsw: spectrum: Add error paths to __mlxsw_sp_port_vlans_add

[Jiri Pirko]

From: Ido Schimmel <idosch@mellanox.com>

The operation of adding VLANs on a port via switchdev ops can fail and
we need to be prepared for it. If we do not rollback hardware operations
following a failure, hardware and software will remain in an
inconsistent state.

Solve that by adding suitable error paths to __mlxsw_sp_port_vlans_add.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
---
 .../ethernet/mellanox/mlxsw/spectrum_switchdev.c   | 61 ++++++++++++++++------
 1 file changed, 46 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index fe88165..f21e239 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -369,8 +369,8 @@ static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port *mlxsw_sp_port,
 {
 	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
 	struct net_device *dev = mlxsw_sp_port->dev;
+	u16 vid, last_visited_vid, old_pvid;
 	enum mlxsw_reg_svfa_mt mt;
-	u16 vid, vid_e;
 	int err;
 
 	/* In case this is invoked with BRIDGE_FLAGS_SELF and port is
@@ -398,15 +398,18 @@ static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port *mlxsw_sp_port,
 			if (err) {
 				netdev_err(dev, "Failed to create FID=VID=%d mapping\n",
 					   vid);
-				return err;
+				goto err_port_vid_to_fid_set;
 			}
 		}
+	}
 
-		/* Set FID mapping according to port's mode */
+	/* Set FID mapping according to port's mode */
+	for (vid = vid_begin; vid <= vid_end; vid++) {
 		err = mlxsw_sp_port_fid_map(mlxsw_sp_port, vid);
 		if (err) {
 			netdev_err(dev, "Failed to map FID=%d", vid);
-			return err;
+			last_visited_vid = --vid;
+			goto err_port_fid_map;
 		}
 	}
 
@@ -414,7 +417,7 @@ static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port *mlxsw_sp_port,
 					true, false);
 	if (err) {
 		netdev_err(dev, "Failed to configure flooding\n");
-		return err;
+		goto err_port_flood_set;
 	}
 
 	err = __mlxsw_sp_port_vlans_set(mlxsw_sp_port, vid_begin, vid_end,
@@ -422,26 +425,54 @@ static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port *mlxsw_sp_port,
 	if (err) {
 		netdev_err(dev, "Unable to add VIDs %d-%d\n", vid_begin,
 			   vid_end);
-		return err;
+		goto err_port_vlans_set;
 	}
 
-	vid = vid_begin;
-	if (flag_pvid && mlxsw_sp_port->pvid != vid) {
-		err = mlxsw_sp_port_pvid_set(mlxsw_sp_port, vid);
+	old_pvid = mlxsw_sp_port->pvid;
+	if (flag_pvid && old_pvid != vid_begin) {
+		err = mlxsw_sp_port_pvid_set(mlxsw_sp_port, vid_begin);
 		if (err) {
-			netdev_err(mlxsw_sp_port->dev, "Unable to add PVID %d\n",
-				   vid);
-			return err;
+			netdev_err(dev, "Unable to add PVID %d\n", vid_begin);
+			goto err_port_pvid_set;
 		}
-		mlxsw_sp_port->pvid = vid;
+		mlxsw_sp_port->pvid = vid_begin;
 	}
 
 	/* Changing activity bits only if HW operation succeded */
 	for (vid = vid_begin; vid <= vid_end; vid++)
 		set_bit(vid, mlxsw_sp_port->active_vlans);
 
-	return mlxsw_sp_port_stp_state_set(mlxsw_sp_port,
-					   mlxsw_sp_port->stp_state);
+	/* STP state change must be done after we set active VLANs */
+	err = mlxsw_sp_port_stp_state_set(mlxsw_sp_port,
+					  mlxsw_sp_port->stp_state);
+	if (err) {
+		netdev_err(dev, "Failed to set STP state\n");
+		goto err_port_stp_state_set;
+	}
+
+	return 0;
+
+err_port_vid_to_fid_set:
+	mlxsw_sp_fid_destroy(mlxsw_sp, vid);
+	return err;
+
+err_port_stp_state_set:
+	for (vid = vid_begin; vid <= vid_end; vid++)
+		clear_bit(vid, mlxsw_sp_port->active_vlans);
+	if (old_pvid != mlxsw_sp_port->pvid)
+		mlxsw_sp_port_pvid_set(mlxsw_sp_port, old_pvid);
+err_port_pvid_set:
+	__mlxsw_sp_port_vlans_set(mlxsw_sp_port, vid_begin, vid_end, false,
+				  false);
+err_port_vlans_set:
+	__mlxsw_sp_port_flood_set(mlxsw_sp_port, vid_begin, vid_end, false,
+				  false);
+err_port_flood_set:
+	last_visited_vid = vid_end;
+err_port_fid_map:
+	for (vid = last_visited_vid; vid >= vid_begin; vid--)
+		mlxsw_sp_port_fid_unmap(mlxsw_sp_port, vid);
+	return err;
 }
 
 static int mlxsw_sp_port_vlans_add(struct mlxsw_sp_port *mlxsw_sp_port,
-- 
1.9.3

Re: [patch net-next 0/3] mlxsw: small driver update

[David Miller]

From: Jiri Pirko <jiri@resnulli.us>
Date: Thu, 19 Nov 2015 12:27:37 +0100

> Couple of VLAN-related patches.

Series applied.

I'm really pleased with this driver and work you guys are doing
on it.

Thanks!

[patch net-next 0/3] mlxsw: small driver update

[Jiri Pirko]

From: Jiri Pirko <jiri@mellanox.com>

Ido Schimmel (1):
  mlxsw: Remove duplicate included header

Jiri Pirko (2):
  mlxsw: expose EMAD transactions statistics via debugfs
  mlxsw: adjust log messages level in __mlxsw_emad_transmit

 drivers/net/ethernet/mellanox/mlxsw/core.c | 60 ++++++++++++++++++++++++++----
 1 file changed, 52 insertions(+), 8 deletions(-)

-- 
1.9.3