[PATCH v3.4 0/3] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls

[PATCH v3.4 0/3] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls

[Darrick J. Wong]

Hi all,

This is a small patch set against the reflink/dedupe test cases in
xfstests.  The first patch is a rewrite of the tools to find the
lowest vacant ID number and to move a test case.  These two programs
are useful for staging a lot of new tests at a high number and moving
them to lower numbers when the maintainer wants to accept the new
tests.

The second patch updates the golden output for the test that examines
the results of feeding bad inputs to the two ioctls.  The new error
values are based on a discussion of how to react to bad file types on
the mailing lists and the ongoing work to hoist the ioctls to the VFS
level.

The third patch has a few more tests for things that I found while
rewriting XFS copy-on-write, and for explicitly testing the ability to
reflink/dedupe "to the end of the file" by setting len == 0.  These
tests are new and need more careful review than the first two patches.

If you're going to start using this mess, you probably ought to just
pull from my github trees for kernel[1], xfsprogs[2], xfstests[3], and
xfs-docs[4].  They should just work with the btrfs that's in 4.4...
and somewhat buggily with the 4.4 XFS patched with [1].  The relevant
xfs_io support will be in xfsprogs 4.3 though it still needs a patch
to fix len == 0 support.  Probably easier just to grab [2] and build
that.

Comments and questions are, as always, welcome.

--D

[1] https://github.com/djwong/linux/tree/for-dave
[2] https://github.com/djwong/xfsprogs/tree/for-dave
[3] https://github.com/djwong/xfstests/tree/for-dave
[4] https://github.com/djwong/xfs-documentation/tree/for-dave

[PATCH v3.4 0/3] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls

[Darrick J. Wong]

Hi all,

This is a small patch set against the reflink/dedupe test cases in
xfstests.  The first patch is a rewrite of the tools to find the
lowest vacant ID number and to move a test case.  These two programs
are useful for staging a lot of new tests at a high number and moving
them to lower numbers when the maintainer wants to accept the new
tests.

The second patch updates the golden output for the test that examines
the results of feeding bad inputs to the two ioctls.  The new error
values are based on a discussion of how to react to bad file types on
the mailing lists and the ongoing work to hoist the ioctls to the VFS
level.

The third patch has a few more tests for things that I found while
rewriting XFS copy-on-write, and for explicitly testing the ability to
reflink/dedupe "to the end of the file" by setting len == 0.  These
tests are new and need more careful review than the first two patches.

If you're going to start using this mess, you probably ought to just
pull from my github trees for kernel[1], xfsprogs[2], xfstests[3], and
xfs-docs[4].  They should just work with the btrfs that's in 4.4...
and somewhat buggily with the 4.4 XFS patched with [1].  The relevant
xfs_io support will be in xfsprogs 4.3 though it still needs a patch
to fix len == 0 support.  Probably easier just to grab [2] and build
that.

Comments and questions are, as always, welcome.

--D

[1] https://github.com/djwong/linux/tree/for-dave
[2] https://github.com/djwong/xfsprogs/tree/for-dave
[3] https://github.com/djwong/xfstests/tree/for-dave
[4] https://github.com/djwong/xfs-documentation/tree/for-dave

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

[PATCH 1/3] test-scripts: test migration scripts

[Darrick J. Wong]

Add two scripts: "nextid" finds the next available test ID number in a
group, and "mvtest" relocates a test, fixes the golden output, and
moves the group entry for that test.

v2: sorting group files should preserve group order; nextid should use
the same algorithm as new; move both tools to tools/.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 tools/mvtest     |   55 +++++++++++++++++++++++++++
 tools/nextid     |    1 
 tools/sort-group |  112 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 168 insertions(+)
 create mode 100755 tools/mvtest
 create mode 120000 tools/nextid
 create mode 100755 tools/sort-group


diff --git a/tools/mvtest b/tools/mvtest
new file mode 100755
index 0000000..af601d6
--- /dev/null
+++ b/tools/mvtest
@@ -0,0 +1,55 @@
+#!/bin/sh
+
+# Renumber a test
+dir="$(dirname "$0")"
+
+if [ -z "$1" ] || [ "$1" = "--help" ]; then
+	echo "Usage: $0 path_to_test new_path_to_test"
+	exit 1
+fi
+
+src="$1"
+dest="$2"
+
+die() {
+	echo "$@"
+	exit 1
+}
+
+append() {
+	out="$1"
+	shift
+	echo "$@" >> "${out}"
+}
+
+test "${src}" != "${dest}" || die "Test \"${src}\" is the same as dest."
+test -e "tests/${src}" || die "Test \"${src}\" does not exist."
+test ! -e "tests/${dest}" || die "Test \"${src}\" already exists."
+
+sid="$(basename "${src}")"
+did="$(basename "${dest}")"
+
+sgroup="$(basename "$(dirname "tests/${src}")")"
+dgroup="$(basename "$(dirname "tests/${dest}")")"
+
+sgroupfile="tests/${sgroup}/group"
+dgroupfile="tests/${sgroup}/group"
+
+git mv "tests/${src}" "tests/${dest}"
+git mv "tests/${src}.out" "tests/${dest}.out"
+sed -e "s/^# FS QA Test No. ${sid}$/# FS QA Test No. ${did}/g" -i "tests/${dest}"
+sed -e "s/^QA output created by ${sid}$/QA output created by ${did}/g" -i "tests/${dest}.out"
+sed -e "s/test-${sid}/test-${did}/g" -i "tests/${dest}.out"
+
+grpline="$(grep "^${sid} " "${sgroupfile}")"
+newgrpline="$(echo "${grpline}" | sed -e "s/^${sid} /${did} /g")"
+
+sed -e "/^${sid}.*$/d" -i "${sgroupfile}"
+cp "${dgroupfile}" "${dgroupfile}.new"
+append "${dgroupfile}.new" "${newgrpline}"
+"${dir}/sort-group.py" "${dgroupfile}.new"
+mv "${dgroupfile}.new" "${dgroupfile}"
+
+echo "Moved \"${src}\" to \"${dest}\"."
+
+exit 0
diff --git a/tools/nextid b/tools/nextid
new file mode 120000
index 0000000..5c31d60
--- /dev/null
+++ b/tools/nextid
@@ -0,0 +1 @@
+sort-group
\ No newline at end of file
diff --git a/tools/sort-group b/tools/sort-group
new file mode 100755
index 0000000..84944ed
--- /dev/null
+++ b/tools/sort-group
@@ -0,0 +1,112 @@
+#!/usr/bin/env python
+import sys
+
+# Sort a group list, carefully preserving comments.
+
+def xfstest_key(key):
+	'''Extract the numeric part of a test name if possible.'''
+	k = 0
+
+	assert type(key) == str
+
+	# No test number at all...
+	if not key[0].isdigit():
+		return key
+
+	# ...otherwise extract as much number as we can.
+	for digit in key:
+		if digit.isdigit():
+			k = k * 10 + int(digit)
+		else:
+			return k
+	return k
+
+def read_group(fd):
+	'''Read the group list, carefully attaching comments to the next test.'''
+	tests = {}
+	comments = None
+
+	for line in fd:
+		sline = line.strip()
+		tokens = sline.split()
+		if len(tokens) == 0 or tokens[0] == '#':
+			if comments == None:
+				comments = []
+			comments.append(sline)
+		else:
+			tests[tokens[0]] = (comments, tokens[1:])
+			comments = None
+	return tests
+
+def sort_keys(keys):
+	'''Separate keys into integer and non-integer tests.'''
+	int_keys = []
+	int_xkeys = []
+	str_keys = []
+
+	# Sort keys into integer(ish) tests and other
+	for key in keys:
+		xkey = xfstest_key(key)
+		if type(xkey) == int:
+			int_keys.append(key)
+			int_xkeys.append(xkey)
+		else:
+			str_keys.append(key)
+	return (int_keys, int_xkeys, str_keys)
+
+def write_sorted(tests, fd):
+	def dump_xkey(xkey):
+		(comments, tokens) = tests[key]
+		if comments:
+			for c in comments:
+				fd.write('%s\n' % c)
+		fd.write('%s %s\n' % (key, ' '.join(tokens)))
+	'''Print tests (and comments) in number order.'''
+
+	(int_keys, ignored, str_keys) = sort_keys(tests.keys())
+	for key in sorted(int_keys, key = xfstest_key):
+		dump_xkey(key)
+	for key in sorted(str_keys):
+		dump_xkey(key)
+
+def sort_main():
+	if '--help' in sys.argv[1:]:
+		print('Usage: %s groupfiles' % sys.argv[0])
+		sys.exit(0)
+
+	for arg in sys.argv[1:]:
+		with open(arg, 'r+') as fd:
+			x = read_group(fd)
+			fd.seek(0, 0)
+			write_sorted(x, fd)
+
+def nextid_main():
+	if '--help' in sys.argv[1:]:
+		print('Usage: %s group[/startid] ' % sys.argv[0])
+		sys.exit(0)
+
+	if len(sys.argv) != 2:
+		print('Specify exactly one group name.')
+		sys.exit(1)
+
+	c = sys.argv[1].split('/')
+	if len(c) > 1:
+		startid = int(c[1])
+	else:
+		startid = 1
+	group = c[0]
+
+	with open('tests/%s/group' % group, 'r') as fd:
+		x = read_group(fd)
+		xkeys = {int(x) for x in sort_keys(x.keys())[1]}
+
+		xid = startid
+		while xid in xkeys:
+			xid += 1
+		print('%s/%d' % (group, xid))
+
+if __name__ == '__main__':
+	if 'nextid' in sys.argv[0]:
+		nextid_main()
+	else:
+		sort_main()

[PATCH 1/3] test-scripts: test migration scripts

[Darrick J. Wong]

Add two scripts: "nextid" finds the next available test ID number in a
group, and "mvtest" relocates a test, fixes the golden output, and
moves the group entry for that test.

v2: sorting group files should preserve group order; nextid should use
the same algorithm as new; move both tools to tools/.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 tools/mvtest     |   55 +++++++++++++++++++++++++++
 tools/nextid     |    1 
 tools/sort-group |  112 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 168 insertions(+)
 create mode 100755 tools/mvtest
 create mode 120000 tools/nextid
 create mode 100755 tools/sort-group


diff --git a/tools/mvtest b/tools/mvtest
new file mode 100755
index 0000000..af601d6
--- /dev/null
+++ b/tools/mvtest
@@ -0,0 +1,55 @@
+#!/bin/sh
+
+# Renumber a test
+dir="$(dirname "$0")"
+
+if [ -z "$1" ] || [ "$1" = "--help" ]; then
+	echo "Usage: $0 path_to_test new_path_to_test"
+	exit 1
+fi
+
+src="$1"
+dest="$2"
+
+die() {
+	echo "$@"
+	exit 1
+}
+
+append() {
+	out="$1"
+	shift
+	echo "$@" >> "${out}"
+}
+
+test "${src}" != "${dest}" || die "Test \"${src}\" is the same as dest."
+test -e "tests/${src}" || die "Test \"${src}\" does not exist."
+test ! -e "tests/${dest}" || die "Test \"${src}\" already exists."
+
+sid="$(basename "${src}")"
+did="$(basename "${dest}")"
+
+sgroup="$(basename "$(dirname "tests/${src}")")"
+dgroup="$(basename "$(dirname "tests/${dest}")")"
+
+sgroupfile="tests/${sgroup}/group"
+dgroupfile="tests/${sgroup}/group"
+
+git mv "tests/${src}" "tests/${dest}"
+git mv "tests/${src}.out" "tests/${dest}.out"
+sed -e "s/^# FS QA Test No. ${sid}$/# FS QA Test No. ${did}/g" -i "tests/${dest}"
+sed -e "s/^QA output created by ${sid}$/QA output created by ${did}/g" -i "tests/${dest}.out"
+sed -e "s/test-${sid}/test-${did}/g" -i "tests/${dest}.out"
+
+grpline="$(grep "^${sid} " "${sgroupfile}")"
+newgrpline="$(echo "${grpline}" | sed -e "s/^${sid} /${did} /g")"
+
+sed -e "/^${sid}.*$/d" -i "${sgroupfile}"
+cp "${dgroupfile}" "${dgroupfile}.new"
+append "${dgroupfile}.new" "${newgrpline}"
+"${dir}/sort-group.py" "${dgroupfile}.new"
+mv "${dgroupfile}.new" "${dgroupfile}"
+
+echo "Moved \"${src}\" to \"${dest}\"."
+
+exit 0
diff --git a/tools/nextid b/tools/nextid
new file mode 120000
index 0000000..5c31d60
--- /dev/null
+++ b/tools/nextid
@@ -0,0 +1 @@
+sort-group
\ No newline at end of file
diff --git a/tools/sort-group b/tools/sort-group
new file mode 100755
index 0000000..84944ed
--- /dev/null
+++ b/tools/sort-group
@@ -0,0 +1,112 @@
+#!/usr/bin/env python
+import sys
+
+# Sort a group list, carefully preserving comments.
+
+def xfstest_key(key):
+	'''Extract the numeric part of a test name if possible.'''
+	k = 0
+
+	assert type(key) == str
+
+	# No test number at all...
+	if not key[0].isdigit():
+		return key
+
+	# ...otherwise extract as much number as we can.
+	for digit in key:
+		if digit.isdigit():
+			k = k * 10 + int(digit)
+		else:
+			return k
+	return k
+
+def read_group(fd):
+	'''Read the group list, carefully attaching comments to the next test.'''
+	tests = {}
+	comments = None
+
+	for line in fd:
+		sline = line.strip()
+		tokens = sline.split()
+		if len(tokens) == 0 or tokens[0] == '#':
+			if comments == None:
+				comments = []
+			comments.append(sline)
+		else:
+			tests[tokens[0]] = (comments, tokens[1:])
+			comments = None
+	return tests
+
+def sort_keys(keys):
+	'''Separate keys into integer and non-integer tests.'''
+	int_keys = []
+	int_xkeys = []
+	str_keys = []
+
+	# Sort keys into integer(ish) tests and other
+	for key in keys:
+		xkey = xfstest_key(key)
+		if type(xkey) == int:
+			int_keys.append(key)
+			int_xkeys.append(xkey)
+		else:
+			str_keys.append(key)
+	return (int_keys, int_xkeys, str_keys)
+
+def write_sorted(tests, fd):
+	def dump_xkey(xkey):
+		(comments, tokens) = tests[key]
+		if comments:
+			for c in comments:
+				fd.write('%s\n' % c)
+		fd.write('%s %s\n' % (key, ' '.join(tokens)))
+	'''Print tests (and comments) in number order.'''
+
+	(int_keys, ignored, str_keys) = sort_keys(tests.keys())
+	for key in sorted(int_keys, key = xfstest_key):
+		dump_xkey(key)
+	for key in sorted(str_keys):
+		dump_xkey(key)
+
+def sort_main():
+	if '--help' in sys.argv[1:]:
+		print('Usage: %s groupfiles' % sys.argv[0])
+		sys.exit(0)
+
+	for arg in sys.argv[1:]:
+		with open(arg, 'r+') as fd:
+			x = read_group(fd)
+			fd.seek(0, 0)
+			write_sorted(x, fd)
+
+def nextid_main():
+	if '--help' in sys.argv[1:]:
+		print('Usage: %s group[/startid] ' % sys.argv[0])
+		sys.exit(0)
+
+	if len(sys.argv) != 2:
+		print('Specify exactly one group name.')
+		sys.exit(1)
+
+	c = sys.argv[1].split('/')
+	if len(c) > 1:
+		startid = int(c[1])
+	else:
+		startid = 1
+	group = c[0]
+
+	with open('tests/%s/group' % group, 'r') as fd:
+		x = read_group(fd)
+		xkeys = {int(x) for x in sort_keys(x.keys())[1]}
+
+		xid = startid
+		while xid in xkeys:
+			xid += 1
+		print('%s/%d' % (group, xid))
+
+if __name__ == '__main__':
+	if 'nextid' in sys.argv[0]:
+		nextid_main()
+	else:
+		sort_main()

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

[PATCH 2/3] generic/15[78]: fix error messages in the golden output

[Darrick J. Wong]

Fix the error messages in the golden output for generic/15[78], which
examine the responses to invalid inputs as returned by the
clone/clone_range/extent_same ioctls.  Also fix a filtering omission.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 tests/generic/157     |   18 +++++++++++++-----
 tests/generic/157.out |    6 +++---
 tests/generic/158     |   18 +++++++++++++-----
 tests/generic/158.out |    8 ++++----
 4 files changed, 33 insertions(+), 17 deletions(-)


diff --git a/tests/generic/157 b/tests/generic/157
index a43fb0d..f68ff52 100755
--- a/tests/generic/157
+++ b/tests/generic/157
@@ -75,10 +75,18 @@ mkdir "$TESTDIR1/dir1"
 seq 1 $((2 * BLKSZ / 250)) | while read f; do
 	touch "$TESTDIR1/dir1/$f"
 done
-mknod "$TESTDIR1/dev1" b 8 0
+mknod "$TESTDIR1/dev1" c 1 3
 mkfifo "$TESTDIR1/fifo1"
 sync
 
+_filter_enotty() {
+	sed -e 's/Inappropriate ioctl for device/Invalid argument/g'
+}
+
+_filter_einval() {
+	sed -e 's/Invalid argument/Bad file descriptor/g'
+}
+
 echo "Try cross-device reflink"
 _reflink_range "$TESTDIR1/file1" 0 "$TESTDIR2/file1" 0 $BLKSZ
 
@@ -98,16 +106,16 @@ echo "Try to reflink a device"
 _reflink_range "$TESTDIR1/dev1" 0 "$TESTDIR1/file2" 0 $BLKSZ
 
 echo "Try to reflink to a dir"
-_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/dir1" 0 $BLKSZ
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/dir1" 0 $BLKSZ 2>&1 | _filter_test_dir
 
 echo "Try to reflink to a device"
-_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/dev1" 0 $BLKSZ
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/dev1" 0 $BLKSZ 2>&1 | _filter_enotty
 
 echo "Try to reflink to a fifo"
-_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/fifo1" 0 $BLKSZ -n
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/fifo1" 0 $BLKSZ -n 2>&1 | _filter_enotty
 
 echo "Try to reflink an append-only file"
-_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/file3" 0 $BLKSZ -a
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/file3" 0 $BLKSZ -a 2>&1 | _filter_einval
 
 echo "Reflink two files"
 _reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/file2" 0 $BLKSZ >> "$seqres.full"
diff --git a/tests/generic/157.out b/tests/generic/157.out
index 177e7f8..ac3c440 100644
--- a/tests/generic/157.out
+++ b/tests/generic/157.out
@@ -14,11 +14,11 @@ XFS_IOC_CLONE_RANGE: Is a directory
 Try to reflink a device
 XFS_IOC_CLONE_RANGE: Invalid argument
 Try to reflink to a dir
-/mnt/test-157/dir1: Is a directory
+TEST_DIR/test-157/dir1: Is a directory
 Try to reflink to a device
-XFS_IOC_CLONE_RANGE: Operation not supported
+XFS_IOC_CLONE_RANGE: Invalid argument
 Try to reflink to a fifo
-XFS_IOC_CLONE_RANGE: Operation not supported
+XFS_IOC_CLONE_RANGE: Invalid argument
 Try to reflink an append-only file
 XFS_IOC_CLONE_RANGE: Bad file descriptor
 Reflink two files
diff --git a/tests/generic/158 b/tests/generic/158
index a499b21..749b186 100755
--- a/tests/generic/158
+++ b/tests/generic/158
@@ -76,10 +76,18 @@ mkdir "$TESTDIR1/dir1"
 seq 1 $((2 * BLKSZ / 250)) | while read f; do
 	touch "$TESTDIR1/dir1/$f"
 done
-mknod "$TESTDIR1/dev1" b 8 0
+mknod "$TESTDIR1/dev1" c 1 3
 mkfifo "$TESTDIR1/fifo1"
 sync
 
+_filter_enotty() {
+	sed -e 's/Inappropriate ioctl for device/Invalid argument/g'
+}
+
+_filter_eperm() {
+	sed -e 's/Permission denied/Invalid argument/g'
+}
+
 echo "Try cross-device dedupe"
 _dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR2/file1" 0 $BLKSZ
 
@@ -96,16 +104,16 @@ echo "Try to dedupe a dir"
 _dedupe_range "$TESTDIR1/dir1" 0 "$TESTDIR1/file2" 0 $BLKSZ
 
 echo "Try to dedupe a device"
-_dedupe_range "$TESTDIR1/dev1" 0 "$TESTDIR1/file2" 0 $BLKSZ
+_dedupe_range "$TESTDIR1/dev1" 0 "$TESTDIR1/file2" 0 $BLKSZ 2>&1 | _filter_enotty
 
 echo "Try to dedupe to a dir"
-_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/dir1" 0 $BLKSZ
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/dir1" 0 $BLKSZ 2>&1 | _filter_test_dir
 
 echo "Try to dedupe to a device"
-_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/dev1" 0 $BLKSZ
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/dev1" 0 $BLKSZ 2>&1 | _filter_eperm
 
 echo "Try to dedupe to a fifo"
-_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/fifo1" 0 $BLKSZ -n
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/fifo1" 0 $BLKSZ -n 2>&1 | _filter_eperm
 
 echo "Try to dedupe an append-only file"
 _dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/file3" 0 $BLKSZ -a >> "$seqres.full"
diff --git a/tests/generic/158.out b/tests/generic/158.out
index 36a3f1f..dff3692 100644
--- a/tests/generic/158.out
+++ b/tests/generic/158.out
@@ -12,13 +12,13 @@ dedupe: Invalid argument
 Try to dedupe a dir
 XFS_IOC_FILE_EXTENT_SAME: Is a directory
 Try to dedupe a device
-XFS_IOC_FILE_EXTENT_SAME: Permission denied
+XFS_IOC_FILE_EXTENT_SAME: Invalid argument
 Try to dedupe to a dir
-/mnt/test-158/dir1: Is a directory
+TEST_DIR/test-158/dir1: Is a directory
 Try to dedupe to a device
-dedupe: Permission denied
+dedupe: Invalid argument
 Try to dedupe to a fifo
-dedupe: Permission denied
+dedupe: Invalid argument
 Try to dedupe an append-only file
 Dedupe two files
 Check scratch fs

[PATCH 2/3] generic/15[78]: fix error messages in the golden output

[Darrick J. Wong]

Fix the error messages in the golden output for generic/15[78], which
examine the responses to invalid inputs as returned by the
clone/clone_range/extent_same ioctls.  Also fix a filtering omission.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 tests/generic/157     |   18 +++++++++++++-----
 tests/generic/157.out |    6 +++---
 tests/generic/158     |   18 +++++++++++++-----
 tests/generic/158.out |    8 ++++----
 4 files changed, 33 insertions(+), 17 deletions(-)


diff --git a/tests/generic/157 b/tests/generic/157
index a43fb0d..f68ff52 100755
--- a/tests/generic/157
+++ b/tests/generic/157
@@ -75,10 +75,18 @@ mkdir "$TESTDIR1/dir1"
 seq 1 $((2 * BLKSZ / 250)) | while read f; do
 	touch "$TESTDIR1/dir1/$f"
 done
-mknod "$TESTDIR1/dev1" b 8 0
+mknod "$TESTDIR1/dev1" c 1 3
 mkfifo "$TESTDIR1/fifo1"
 sync
 
+_filter_enotty() {
+	sed -e 's/Inappropriate ioctl for device/Invalid argument/g'
+}
+
+_filter_einval() {
+	sed -e 's/Invalid argument/Bad file descriptor/g'
+}
+
 echo "Try cross-device reflink"
 _reflink_range "$TESTDIR1/file1" 0 "$TESTDIR2/file1" 0 $BLKSZ
 
@@ -98,16 +106,16 @@ echo "Try to reflink a device"
 _reflink_range "$TESTDIR1/dev1" 0 "$TESTDIR1/file2" 0 $BLKSZ
 
 echo "Try to reflink to a dir"
-_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/dir1" 0 $BLKSZ
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/dir1" 0 $BLKSZ 2>&1 | _filter_test_dir
 
 echo "Try to reflink to a device"
-_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/dev1" 0 $BLKSZ
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/dev1" 0 $BLKSZ 2>&1 | _filter_enotty
 
 echo "Try to reflink to a fifo"
-_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/fifo1" 0 $BLKSZ -n
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/fifo1" 0 $BLKSZ -n 2>&1 | _filter_enotty
 
 echo "Try to reflink an append-only file"
-_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/file3" 0 $BLKSZ -a
+_reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/file3" 0 $BLKSZ -a 2>&1 | _filter_einval
 
 echo "Reflink two files"
 _reflink_range "$TESTDIR1/file1" 0 "$TESTDIR1/file2" 0 $BLKSZ >> "$seqres.full"
diff --git a/tests/generic/157.out b/tests/generic/157.out
index 177e7f8..ac3c440 100644
--- a/tests/generic/157.out
+++ b/tests/generic/157.out
@@ -14,11 +14,11 @@ XFS_IOC_CLONE_RANGE: Is a directory
 Try to reflink a device
 XFS_IOC_CLONE_RANGE: Invalid argument
 Try to reflink to a dir
-/mnt/test-157/dir1: Is a directory
+TEST_DIR/test-157/dir1: Is a directory
 Try to reflink to a device
-XFS_IOC_CLONE_RANGE: Operation not supported
+XFS_IOC_CLONE_RANGE: Invalid argument
 Try to reflink to a fifo
-XFS_IOC_CLONE_RANGE: Operation not supported
+XFS_IOC_CLONE_RANGE: Invalid argument
 Try to reflink an append-only file
 XFS_IOC_CLONE_RANGE: Bad file descriptor
 Reflink two files
diff --git a/tests/generic/158 b/tests/generic/158
index a499b21..749b186 100755
--- a/tests/generic/158
+++ b/tests/generic/158
@@ -76,10 +76,18 @@ mkdir "$TESTDIR1/dir1"
 seq 1 $((2 * BLKSZ / 250)) | while read f; do
 	touch "$TESTDIR1/dir1/$f"
 done
-mknod "$TESTDIR1/dev1" b 8 0
+mknod "$TESTDIR1/dev1" c 1 3
 mkfifo "$TESTDIR1/fifo1"
 sync
 
+_filter_enotty() {
+	sed -e 's/Inappropriate ioctl for device/Invalid argument/g'
+}
+
+_filter_eperm() {
+	sed -e 's/Permission denied/Invalid argument/g'
+}
+
 echo "Try cross-device dedupe"
 _dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR2/file1" 0 $BLKSZ
 
@@ -96,16 +104,16 @@ echo "Try to dedupe a dir"
 _dedupe_range "$TESTDIR1/dir1" 0 "$TESTDIR1/file2" 0 $BLKSZ
 
 echo "Try to dedupe a device"
-_dedupe_range "$TESTDIR1/dev1" 0 "$TESTDIR1/file2" 0 $BLKSZ
+_dedupe_range "$TESTDIR1/dev1" 0 "$TESTDIR1/file2" 0 $BLKSZ 2>&1 | _filter_enotty
 
 echo "Try to dedupe to a dir"
-_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/dir1" 0 $BLKSZ
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/dir1" 0 $BLKSZ 2>&1 | _filter_test_dir
 
 echo "Try to dedupe to a device"
-_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/dev1" 0 $BLKSZ
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/dev1" 0 $BLKSZ 2>&1 | _filter_eperm
 
 echo "Try to dedupe to a fifo"
-_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/fifo1" 0 $BLKSZ -n
+_dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/fifo1" 0 $BLKSZ -n 2>&1 | _filter_eperm
 
 echo "Try to dedupe an append-only file"
 _dedupe_range "$TESTDIR1/file1" 0 "$TESTDIR1/file3" 0 $BLKSZ -a >> "$seqres.full"
diff --git a/tests/generic/158.out b/tests/generic/158.out
index 36a3f1f..dff3692 100644
--- a/tests/generic/158.out
+++ b/tests/generic/158.out
@@ -12,13 +12,13 @@ dedupe: Invalid argument
 Try to dedupe a dir
 XFS_IOC_FILE_EXTENT_SAME: Is a directory
 Try to dedupe a device
-XFS_IOC_FILE_EXTENT_SAME: Permission denied
+XFS_IOC_FILE_EXTENT_SAME: Invalid argument
 Try to dedupe to a dir
-/mnt/test-158/dir1: Is a directory
+TEST_DIR/test-158/dir1: Is a directory
 Try to dedupe to a device
-dedupe: Permission denied
+dedupe: Invalid argument
 Try to dedupe to a fifo
-dedupe: Permission denied
+dedupe: Invalid argument
 Try to dedupe an append-only file
 Dedupe two files
 Check scratch fs

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

[PATCH 3/3] reflink: more tests

[Darrick J. Wong]

Add more tests for unaligned copy-on-write things, and explicitly
test the ability to pass "len == 0" to mean reflink/dedupe all
the way to the end of the file".

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 tests/generic/820     |   77 ++++++++++++++++++++++++++++++++
 tests/generic/820.out |    8 +++
 tests/generic/847     |   96 ++++++++++++++++++++++++++++++++++++++++
 tests/generic/847.out |   11 +++++
 tests/generic/848     |   96 ++++++++++++++++++++++++++++++++++++++++
 tests/generic/848.out |   11 +++++
 tests/generic/849     |   80 ++++++++++++++++++++++++++++++++++
 tests/generic/849.out |    6 +++
 tests/generic/850     |  117 +++++++++++++++++++++++++++++++++++++++++++++++++
 tests/generic/850.out |   17 +++++++
 tests/generic/group   |    5 ++
 11 files changed, 524 insertions(+)
 create mode 100755 tests/generic/820
 create mode 100644 tests/generic/820.out
 create mode 100755 tests/generic/847
 create mode 100644 tests/generic/847.out
 create mode 100755 tests/generic/848
 create mode 100644 tests/generic/848.out
 create mode 100755 tests/generic/849
 create mode 100644 tests/generic/849.out
 create mode 100755 tests/generic/850
 create mode 100644 tests/generic/850.out


diff --git a/tests/generic/820 b/tests/generic/820
new file mode 100755
index 0000000..e475f71
--- /dev/null
+++ b/tests/generic/820
@@ -0,0 +1,77 @@
+#! /bin/bash
+# FS QA Test No. 820
+#
+# Ensure that punch-hole doesn't clobber CoW.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fpunch"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+NR=512
+_pwrite_byte 0x61 0 $((BLKSZ * NR)) "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+echo "Write and punch"
+_pwrite_byte 0x62 0 $((BLKSZ * 256)) "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "fpunch $BLKSZ $((BLKSZ * 254))" "$TESTDIR/file2"
+_test_remount
+
+echo "Compare results"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/820.out b/tests/generic/820.out
new file mode 100644
index 0000000..527617d
--- /dev/null
+++ b/tests/generic/820.out
@@ -0,0 +1,8 @@
+QA output created by 820
+Create the original files
+bc3d7c2ff64219e33239f2e13c2d21db  TEST_DIR/test-820/file1
+bc3d7c2ff64219e33239f2e13c2d21db  TEST_DIR/test-820/file2
+Write and punch
+Compare results
+bc3d7c2ff64219e33239f2e13c2d21db  TEST_DIR/test-820/file1
+95cfd19ce56010430dc2057413d7efc5  TEST_DIR/test-820/file2
diff --git a/tests/generic/847 b/tests/generic/847
new file mode 100755
index 0000000..ee8b53b
--- /dev/null
+++ b/tests/generic/847
@@ -0,0 +1,96 @@
+#! /bin/bash
+# FS QA Test No. 847
+#
+# Ensure that unaligned punch-hole steps around reflinked ranges:
+#   - Create a reflink clone of a file
+#   - Perform an unaligned punch in the middle of the file.
+#   - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fpunch"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 3)) "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+
+_pwrite_byte 0x61 0 $((BLKSZ * 3)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ - 17)) $((BLKSZ + 17)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+
+echo "fpunch files"
+"$XFS_IO_PROG" -f -c "fpunch $((BLKSZ - 17)) $((BLKSZ + 17))" "$TESTDIR/file2"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/847.out b/tests/generic/847.out
new file mode 100644
index 0000000..8139857
--- /dev/null
+++ b/tests/generic/847.out
@@ -0,0 +1,11 @@
+QA output created by 847
+Create the original files
+998b4ba52f2940dc515001e75926b19f  TEST_DIR/test-847/file1
+998b4ba52f2940dc515001e75926b19f  TEST_DIR/test-847/file2
+8cdf70c9cfb33bdc7397806b87e7c7ea  TEST_DIR/test-847/file2.chk
+fpunch files
+Compare files
+998b4ba52f2940dc515001e75926b19f  TEST_DIR/test-847/file1
+8cdf70c9cfb33bdc7397806b87e7c7ea  TEST_DIR/test-847/file2
+8cdf70c9cfb33bdc7397806b87e7c7ea  TEST_DIR/test-847/file2.chk
+Compare against check files
diff --git a/tests/generic/848 b/tests/generic/848
new file mode 100755
index 0000000..cb848fb
--- /dev/null
+++ b/tests/generic/848
@@ -0,0 +1,96 @@
+#! /bin/bash
+# FS QA Test No. 848
+#
+# Ensure that unaligned zero-range steps around reflinked ranges:
+#   - Create a reflink clone of a file
+#   - Perform an unaligned zero-range in the middle of the file.
+#   - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fzero"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 3)) "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+
+_pwrite_byte 0x61 0 $((BLKSZ * 3)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ - 17)) $((BLKSZ + 17)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+
+echo "fzero files"
+"$XFS_IO_PROG" -f -c "fzero $((BLKSZ - 17)) $((BLKSZ + 17))" "$TESTDIR/file2"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/848.out b/tests/generic/848.out
new file mode 100644
index 0000000..94c674b
--- /dev/null
+++ b/tests/generic/848.out
@@ -0,0 +1,11 @@
+QA output created by 848
+Create the original files
+998b4ba52f2940dc515001e75926b19f  TEST_DIR/test-848/file1
+998b4ba52f2940dc515001e75926b19f  TEST_DIR/test-848/file2
+8cdf70c9cfb33bdc7397806b87e7c7ea  TEST_DIR/test-848/file2.chk
+fzero files
+Compare files
+998b4ba52f2940dc515001e75926b19f  TEST_DIR/test-848/file1
+8cdf70c9cfb33bdc7397806b87e7c7ea  TEST_DIR/test-848/file2
+8cdf70c9cfb33bdc7397806b87e7c7ea  TEST_DIR/test-848/file2.chk
+Compare against check files
diff --git a/tests/generic/849 b/tests/generic/849
new file mode 100755
index 0000000..76f1e70
--- /dev/null
+++ b/tests/generic/849
@@ -0,0 +1,80 @@
+#! /bin/bash
+# FS QA Test No. 849
+#
+# Test the convention that reflink with length == 0 means "to the end of fileA"
+#   - Create a file.
+#   - Try to reflink "zero" bytes.
+#   - Check that the reflink happened.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ * 256)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ * 2)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 255)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) 0 >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/849.out b/tests/generic/849.out
new file mode 100644
index 0000000..159305a
--- /dev/null
+++ b/tests/generic/849.out
@@ -0,0 +1,6 @@
+QA output created by 849
+Create the original files
+f4820540fc0ac02750739896fe028d56  TEST_DIR/test-849/file1
+dc881c004745c49f7f4e9cc766f57bc8  TEST_DIR/test-849/file2
+dc881c004745c49f7f4e9cc766f57bc8  TEST_DIR/test-849/file2.chk
+Compare against check files
diff --git a/tests/generic/850 b/tests/generic/850
new file mode 100755
index 0000000..954d41d
--- /dev/null
+++ b/tests/generic/850
@@ -0,0 +1,117 @@
+#! /bin/bash
+# FS QA Test No. 850
+#
+# Test the convention that reflink with length == 0 means "to the end of fileA"
+#   - Create a file.
+#   - Try to reflink "zero" bytes (which means reflink to EOF).
+#   - Check that the reflink happened.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ * 257)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ * 257)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_dedupe_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) 0 >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+
+echo "Make the original file almost dedup-able"
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_dedupe_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) 0 >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+
+echo "Make the original file dedup-able"
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 257)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 257)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_dedupe_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) 0 >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/850.out b/tests/generic/850.out
new file mode 100644
index 0000000..126187e
--- /dev/null
+++ b/tests/generic/850.out
@@ -0,0 +1,17 @@
+QA output created by 850
+Create the original files
+f4820540fc0ac02750739896fe028d56  TEST_DIR/test-850/file1
+69ad53078a16243d98e21d9f8704a071  TEST_DIR/test-850/file2
+69ad53078a16243d98e21d9f8704a071  TEST_DIR/test-850/file2.chk
+Compare against check files
+Make the original file almost dedup-able
+f4820540fc0ac02750739896fe028d56  TEST_DIR/test-850/file1
+158d4e3578b94b89cbb44493a2110fb9  TEST_DIR/test-850/file2
+158d4e3578b94b89cbb44493a2110fb9  TEST_DIR/test-850/file2.chk
+Compare against check files
+Make the original file dedup-able
+f4820540fc0ac02750739896fe028d56  TEST_DIR/test-850/file1
+113c7055ffe3d24d2dec27e82ab55abd  TEST_DIR/test-850/file2
+113c7055ffe3d24d2dec27e82ab55abd  TEST_DIR/test-850/file2.chk
+file1 and file2 should match
+Compare against check files
diff --git a/tests/generic/group b/tests/generic/group
index 355603f..bf33541 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -257,3 +257,8 @@
 323 auto aio stress
 324 auto fsr quick
 325 auto quick data log
+820 auto quick clone
+847 auto quick clone
+848 auto quick clone
+849 auto quick clone
+850 auto quick clone

[PATCH 3/3] reflink: more tests

[Darrick J. Wong]

Add more tests for unaligned copy-on-write things, and explicitly
test the ability to pass "len == 0" to mean reflink/dedupe all
the way to the end of the file".

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 tests/generic/820     |   77 ++++++++++++++++++++++++++++++++
 tests/generic/820.out |    8 +++
 tests/generic/847     |   96 ++++++++++++++++++++++++++++++++++++++++
 tests/generic/847.out |   11 +++++
 tests/generic/848     |   96 ++++++++++++++++++++++++++++++++++++++++
 tests/generic/848.out |   11 +++++
 tests/generic/849     |   80 ++++++++++++++++++++++++++++++++++
 tests/generic/849.out |    6 +++
 tests/generic/850     |  117 +++++++++++++++++++++++++++++++++++++++++++++++++
 tests/generic/850.out |   17 +++++++
 tests/generic/group   |    5 ++
 11 files changed, 524 insertions(+)
 create mode 100755 tests/generic/820
 create mode 100644 tests/generic/820.out
 create mode 100755 tests/generic/847
 create mode 100644 tests/generic/847.out
 create mode 100755 tests/generic/848
 create mode 100644 tests/generic/848.out
 create mode 100755 tests/generic/849
 create mode 100644 tests/generic/849.out
 create mode 100755 tests/generic/850
 create mode 100644 tests/generic/850.out


diff --git a/tests/generic/820 b/tests/generic/820
new file mode 100755
index 0000000..e475f71
--- /dev/null
+++ b/tests/generic/820
@@ -0,0 +1,77 @@
+#! /bin/bash
+# FS QA Test No. 820
+#
+# Ensure that punch-hole doesn't clobber CoW.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fpunch"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+NR=512
+_pwrite_byte 0x61 0 $((BLKSZ * NR)) "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+echo "Write and punch"
+_pwrite_byte 0x62 0 $((BLKSZ * 256)) "$TESTDIR/file2" >> "$seqres.full"
+"$XFS_IO_PROG" -f -c "fpunch $BLKSZ $((BLKSZ * 254))" "$TESTDIR/file2"
+_test_remount
+
+echo "Compare results"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/820.out b/tests/generic/820.out
new file mode 100644
index 0000000..527617d
--- /dev/null
+++ b/tests/generic/820.out
@@ -0,0 +1,8 @@
+QA output created by 820
+Create the original files
+bc3d7c2ff64219e33239f2e13c2d21db  TEST_DIR/test-820/file1
+bc3d7c2ff64219e33239f2e13c2d21db  TEST_DIR/test-820/file2
+Write and punch
+Compare results
+bc3d7c2ff64219e33239f2e13c2d21db  TEST_DIR/test-820/file1
+95cfd19ce56010430dc2057413d7efc5  TEST_DIR/test-820/file2
diff --git a/tests/generic/847 b/tests/generic/847
new file mode 100755
index 0000000..ee8b53b
--- /dev/null
+++ b/tests/generic/847
@@ -0,0 +1,96 @@
+#! /bin/bash
+# FS QA Test No. 847
+#
+# Ensure that unaligned punch-hole steps around reflinked ranges:
+#   - Create a reflink clone of a file
+#   - Perform an unaligned punch in the middle of the file.
+#   - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fpunch"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 3)) "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+
+_pwrite_byte 0x61 0 $((BLKSZ * 3)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ - 17)) $((BLKSZ + 17)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+
+echo "fpunch files"
+"$XFS_IO_PROG" -f -c "fpunch $((BLKSZ - 17)) $((BLKSZ + 17))" "$TESTDIR/file2"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/847.out b/tests/generic/847.out
new file mode 100644
index 0000000..8139857
--- /dev/null
+++ b/tests/generic/847.out
@@ -0,0 +1,11 @@
+QA output created by 847
+Create the original files
+998b4ba52f2940dc515001e75926b19f  TEST_DIR/test-847/file1
+998b4ba52f2940dc515001e75926b19f  TEST_DIR/test-847/file2
+8cdf70c9cfb33bdc7397806b87e7c7ea  TEST_DIR/test-847/file2.chk
+fpunch files
+Compare files
+998b4ba52f2940dc515001e75926b19f  TEST_DIR/test-847/file1
+8cdf70c9cfb33bdc7397806b87e7c7ea  TEST_DIR/test-847/file2
+8cdf70c9cfb33bdc7397806b87e7c7ea  TEST_DIR/test-847/file2.chk
+Compare against check files
diff --git a/tests/generic/848 b/tests/generic/848
new file mode 100755
index 0000000..cb848fb
--- /dev/null
+++ b/tests/generic/848
@@ -0,0 +1,96 @@
+#! /bin/bash
+# FS QA Test No. 848
+#
+# Ensure that unaligned zero-range steps around reflinked ranges:
+#   - Create a reflink clone of a file
+#   - Perform an unaligned zero-range in the middle of the file.
+#   - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+_require_xfs_io_command "fzero"
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 3)) "$TESTDIR/file1" >> "$seqres.full"
+
+_cp_reflink "$TESTDIR/file1" "$TESTDIR/file2"
+
+_pwrite_byte 0x61 0 $((BLKSZ * 3)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x00 $((BLKSZ - 17)) $((BLKSZ + 17)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+
+echo "fzero files"
+"$XFS_IO_PROG" -f -c "fzero $((BLKSZ - 17)) $((BLKSZ + 17))" "$TESTDIR/file2"
+_test_remount
+
+echo "Compare files"
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/848.out b/tests/generic/848.out
new file mode 100644
index 0000000..94c674b
--- /dev/null
+++ b/tests/generic/848.out
@@ -0,0 +1,11 @@
+QA output created by 848
+Create the original files
+998b4ba52f2940dc515001e75926b19f  TEST_DIR/test-848/file1
+998b4ba52f2940dc515001e75926b19f  TEST_DIR/test-848/file2
+8cdf70c9cfb33bdc7397806b87e7c7ea  TEST_DIR/test-848/file2.chk
+fzero files
+Compare files
+998b4ba52f2940dc515001e75926b19f  TEST_DIR/test-848/file1
+8cdf70c9cfb33bdc7397806b87e7c7ea  TEST_DIR/test-848/file2
+8cdf70c9cfb33bdc7397806b87e7c7ea  TEST_DIR/test-848/file2.chk
+Compare against check files
diff --git a/tests/generic/849 b/tests/generic/849
new file mode 100755
index 0000000..76f1e70
--- /dev/null
+++ b/tests/generic/849
@@ -0,0 +1,80 @@
+#! /bin/bash
+# FS QA Test No. 849
+#
+# Test the convention that reflink with length == 0 means "to the end of fileA"
+#   - Create a file.
+#   - Try to reflink "zero" bytes.
+#   - Check that the reflink happened.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ * 256)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ * 2)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_pwrite_byte 0x61 $((BLKSZ * 2)) $((BLKSZ * 255)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_reflink_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) 0 >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/849.out b/tests/generic/849.out
new file mode 100644
index 0000000..159305a
--- /dev/null
+++ b/tests/generic/849.out
@@ -0,0 +1,6 @@
+QA output created by 849
+Create the original files
+f4820540fc0ac02750739896fe028d56  TEST_DIR/test-849/file1
+dc881c004745c49f7f4e9cc766f57bc8  TEST_DIR/test-849/file2
+dc881c004745c49f7f4e9cc766f57bc8  TEST_DIR/test-849/file2.chk
+Compare against check files
diff --git a/tests/generic/850 b/tests/generic/850
new file mode 100755
index 0000000..954d41d
--- /dev/null
+++ b/tests/generic/850
@@ -0,0 +1,117 @@
+#! /bin/bash
+# FS QA Test No. 850
+#
+# Test the convention that reflink with length == 0 means "to the end of fileA"
+#   - Create a file.
+#   - Try to reflink "zero" bytes (which means reflink to EOF).
+#   - Check that the reflink happened.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -rf "$tmp".* "$TESTDIR"
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_require_test_reflink
+_require_cp_reflink
+
+rm -f "$seqres.full"
+
+TESTDIR="$TEST_DIR/test-$seq"
+rm -rf "$TESTDIR"
+mkdir "$TESTDIR"
+
+echo "Create the original files"
+BLKSZ=65536
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ * 257)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x62 0 $((BLKSZ * 257)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_dedupe_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) 0 >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+
+echo "Make the original file almost dedup-able"
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_dedupe_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) 0 >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+
+echo "Make the original file dedup-able"
+_pwrite_byte 0x61 0 $((BLKSZ * 256)) "$TESTDIR/file1" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 257)) "$TESTDIR/file2" >> "$seqres.full"
+_pwrite_byte 0x61 0 $((BLKSZ * 257)) "$TESTDIR/file2.chk" >> "$seqres.full"
+_dedupe_range "$TESTDIR/file1" $BLKSZ "$TESTDIR/file2" $((BLKSZ * 2)) 0 >> "$seqres.full"
+_test_remount
+
+md5sum "$TESTDIR/file1" | _filter_test_dir
+md5sum "$TESTDIR/file2" | _filter_test_dir
+md5sum "$TESTDIR/file2.chk" | _filter_test_dir
+
+C1="$(_md5_checksum "$TESTDIR/file1")"
+C2="$(_md5_checksum "$TESTDIR/file2")"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+
+echo "Compare against check files"
+cmp -s "$TESTDIR/file2" "$TESTDIR/file2.chk" || echo "file2 and file2.chk do not match"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/850.out b/tests/generic/850.out
new file mode 100644
index 0000000..126187e
--- /dev/null
+++ b/tests/generic/850.out
@@ -0,0 +1,17 @@
+QA output created by 850
+Create the original files
+f4820540fc0ac02750739896fe028d56  TEST_DIR/test-850/file1
+69ad53078a16243d98e21d9f8704a071  TEST_DIR/test-850/file2
+69ad53078a16243d98e21d9f8704a071  TEST_DIR/test-850/file2.chk
+Compare against check files
+Make the original file almost dedup-able
+f4820540fc0ac02750739896fe028d56  TEST_DIR/test-850/file1
+158d4e3578b94b89cbb44493a2110fb9  TEST_DIR/test-850/file2
+158d4e3578b94b89cbb44493a2110fb9  TEST_DIR/test-850/file2.chk
+Compare against check files
+Make the original file dedup-able
+f4820540fc0ac02750739896fe028d56  TEST_DIR/test-850/file1
+113c7055ffe3d24d2dec27e82ab55abd  TEST_DIR/test-850/file2
+113c7055ffe3d24d2dec27e82ab55abd  TEST_DIR/test-850/file2.chk
+file1 and file2 should match
+Compare against check files
diff --git a/tests/generic/group b/tests/generic/group
index 355603f..bf33541 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -257,3 +257,8 @@
 323 auto aio stress
 324 auto fsr quick
 325 auto quick data log
+820 auto quick clone
+847 auto quick clone
+848 auto quick clone
+849 auto quick clone
+850 auto quick clone

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: [PATCH 3/3] reflink: more tests

[Christoph Hellwig]

The new 849 fails reliably on btrfs, which makes me wonder if either
the test is doing something wrong, or the btrfs whole file clone
behavior is broken, which wouldn't be very reasuring.  I didn't have
time to look into why it's failing yet.

Re: [PATCH 3/3] reflink: more tests

[Christoph Hellwig]

The new 849 fails reliably on btrfs, which makes me wonder if either
the test is doing something wrong, or the btrfs whole file clone
behavior is broken, which wouldn't be very reasuring.  I didn't have
time to look into why it's failing yet.

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: [PATCH 3/3] reflink: more tests

[Darrick J. Wong]

On Thu, Dec 10, 2015 at 08:34:49AM -0800, Christoph Hellwig wrote:
> The new 849 fails reliably on btrfs, which makes me wonder if either
> the test is doing something wrong, or the btrfs whole file clone
> behavior is broken, which wouldn't be very reasuring.  I didn't have
> time to look into why it's failing yet.

Huh.  Works reliably for /me; could you send me the output from 849?

--D

> --
> To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/3] reflink: more tests

[Darrick J. Wong]

On Thu, Dec 10, 2015 at 08:34:49AM -0800, Christoph Hellwig wrote:
> The new 849 fails reliably on btrfs, which makes me wonder if either
> the test is doing something wrong, or the btrfs whole file clone
> behavior is broken, which wouldn't be very reasuring.  I didn't have
> time to look into why it's failing yet.

Huh.  Works reliably for /me; could you send me the output from 849?

--D

> --
> To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

Re: [PATCH 3/3] reflink: more tests

[Christoph Hellwig]

On Thu, Dec 10, 2015 at 11:14:29AM -0800, Darrick J. Wong wrote:
> On Thu, Dec 10, 2015 at 08:34:49AM -0800, Christoph Hellwig wrote:
> > The new 849 fails reliably on btrfs, which makes me wonder if either
> > the test is doing something wrong, or the btrfs whole file clone
> > behavior is broken, which wouldn't be very reasuring.  I didn't have
> > time to look into why it's failing yet.
> 
> Huh.  Works reliably for /me; could you send me the output from 849?

--- tests/generic/849.out	2015-12-09 15:31:50.492879152 +0000
+++ /root/xfstests/results//generic/849.out.bad	2015-12-11
00:02:25.154347175 +0000
@@ -1,6 +1,7 @@
 QA output created by 849
 Create the original files
 f4820540fc0ac02750739896fe028d56  TEST_DIR/test-849/file1
-dc881c004745c49f7f4e9cc766f57bc8  TEST_DIR/test-849/file2
+eb34153e9ed1e774db28cbbe4090a449  TEST_DIR/test-849/file2
 dc881c004745c49f7f4e9cc766f57bc8  TEST_DIR/test-849/file2.chk
 Compare against check files
+file2 and file2.chk do not match

Re: [PATCH 3/3] reflink: more tests

[Christoph Hellwig]

On Thu, Dec 10, 2015 at 11:14:29AM -0800, Darrick J. Wong wrote:
> On Thu, Dec 10, 2015 at 08:34:49AM -0800, Christoph Hellwig wrote:
> > The new 849 fails reliably on btrfs, which makes me wonder if either
> > the test is doing something wrong, or the btrfs whole file clone
> > behavior is broken, which wouldn't be very reasuring.  I didn't have
> > time to look into why it's failing yet.
> 
> Huh.  Works reliably for /me; could you send me the output from 849?

--- tests/generic/849.out	2015-12-09 15:31:50.492879152 +0000
+++ /root/xfstests/results//generic/849.out.bad	2015-12-11
00:02:25.154347175 +0000
@@ -1,6 +1,7 @@
 QA output created by 849
 Create the original files
 f4820540fc0ac02750739896fe028d56  TEST_DIR/test-849/file1
-dc881c004745c49f7f4e9cc766f57bc8  TEST_DIR/test-849/file2
+eb34153e9ed1e774db28cbbe4090a449  TEST_DIR/test-849/file2
 dc881c004745c49f7f4e9cc766f57bc8  TEST_DIR/test-849/file2.chk
 Compare against check files
+file2 and file2.chk do not match

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs