[PATCH V2 0/4] scsi: storvsc: Properly support FC hosts

[PATCH V2 0/4] scsi: storvsc: Properly support FC hosts

[K. Y. Srinivasan]

Properly support FC hosts. Additional cleanup patches are also
included.

In this version I have adddressed comments from
Dan Carpenter <dan.carpenter@oracle.com> and
from Johannes Thumshirn <jthumshirn@suse.de>.

K. Y. Srinivasan (4):
  scsi: storvsc: Fix a bug in the layout of the hv_fc_wwn_packet
  scsi: storvsc: Properly support Fibre Channel devices
  scsi: storvsc: Refactor the code in storvsc_channel_init()
  scsi: storvsc: Tighten up the interrupt path

 drivers/scsi/storvsc_drv.c |  256 ++++++++++++++++++++++++--------------------
 1 files changed, 141 insertions(+), 115 deletions(-)

-- 
1.7.4.1

[PATCH V2 1/4] scsi: storvsc: Fix a bug in the layout of the hv_fc_wwn_packet

[K. Y. Srinivasan]

The hv_fc_wwn_packet is exchanged over vmbus. Make the definition in Linux match
the Window's definition.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Long Li <longli@microsoft.com>
Tested-by: Alex Ng <alexng@microsoft.com>
---
 drivers/scsi/storvsc_drv.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index c41f674..00bb4bd 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -92,9 +92,8 @@ enum vstor_packet_operation {
  */
 
 struct hv_fc_wwn_packet {
-	bool	primary_active;
-	u8	reserved1;
-	u8	reserved2;
+	u8	primary_active;
+	u8	reserved1[3];
 	u8	primary_port_wwn[8];
 	u8	primary_node_wwn[8];
 	u8	secondary_port_wwn[8];
-- 
1.7.4.1

[PATCH V2 1/4] scsi: storvsc: Fix a bug in the layout of the hv_fc_wwn_packet

[K. Y. Srinivasan]

The hv_fc_wwn_packet is exchanged over vmbus. Make the definition in Linux match
the Window's definition.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Long Li <longli@microsoft.com>
Tested-by: Alex Ng <alexng@microsoft.com>
---
 drivers/scsi/storvsc_drv.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index c41f674..00bb4bd 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -92,9 +92,8 @@ enum vstor_packet_operation {
  */
 
 struct hv_fc_wwn_packet {
-	bool	primary_active;
-	u8	reserved1;
-	u8	reserved2;
+	u8	primary_active;
+	u8	reserved1[3];
 	u8	primary_port_wwn[8];
 	u8	primary_node_wwn[8];
 	u8	secondary_port_wwn[8];
-- 
1.7.4.1

[PATCH V2 2/4] scsi: storvsc: Properly support Fibre Channel devices

[K. Y. Srinivasan]

For FC devices managed by this driver, atttach the appropriate transport
template. This will allow us to create the appropriate sysfs files for
these devices. With this we can publish the wwn for both the port and the node.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Tested-by: Alex Ng <alexng@microsoft.com>
---
	V2: Fixed error paths - Dan Carpenter <dan.carpenter@oracle.com>

 drivers/scsi/storvsc_drv.c |  162 +++++++++++++++++++++++++++++++-------------
 1 files changed, 115 insertions(+), 47 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 00bb4bd..ab9828c 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -41,6 +41,7 @@
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_devinfo.h>
 #include <scsi/scsi_dbg.h>
+#include <scsi/scsi_transport_fc.h>
 
 /*
  * All wire protocol details (storage protocol between the guest and the host)
@@ -397,6 +398,7 @@ static int storvsc_timeout = 180;
 
 static int msft_blist_flags = BLIST_TRY_VPD_PAGES;
 
+static struct scsi_transport_template *fc_transport_template;
 
 static void storvsc_on_channel_callback(void *context);
 
@@ -456,6 +458,11 @@ struct storvsc_device {
 	/* Used for vsc/vsp channel reset process */
 	struct storvsc_cmd_request init_request;
 	struct storvsc_cmd_request reset_request;
+	/*
+	 * Currently active port and node names for FC devices.
+	 */
+	u64 node_name;
+	u64 port_name;
 };
 
 struct hv_host_device {
@@ -695,7 +702,26 @@ static void  handle_multichannel_storage(struct hv_device *device, int max_chns)
 	vmbus_are_subchannels_present(device->channel);
 }
 
-static int storvsc_channel_init(struct hv_device *device)
+static void cache_wwn(struct storvsc_device *stor_device,
+		      struct vstor_packet *vstor_packet)
+{
+	/*
+	 * Cache the currently active port and node ww names.
+	 */
+	if (vstor_packet->wwn_packet.primary_active) {
+		stor_device->node_name =
+			wwn_to_u64(vstor_packet->wwn_packet.primary_node_wwn);
+		stor_device->port_name =
+			wwn_to_u64(vstor_packet->wwn_packet.primary_port_wwn);
+	} else {
+		stor_device->node_name =
+			wwn_to_u64(vstor_packet->wwn_packet.secondary_node_wwn);
+		stor_device->port_name =
+			wwn_to_u64(vstor_packet->wwn_packet.secondary_port_wwn);
+	}
+}
+
+static int storvsc_channel_init(struct hv_device *device, bool is_fc)
 {
 	struct storvsc_device *stor_device;
 	struct storvsc_cmd_request *request;
@@ -727,19 +753,15 @@ static int storvsc_channel_init(struct hv_device *device)
 			       VM_PKT_DATA_INBAND,
 			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
 	if (ret != 0)
-		goto cleanup;
+		return ret;
 
 	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-	if (t == 0) {
-		ret = -ETIMEDOUT;
-		goto cleanup;
-	}
+	if (t == 0)
+		return -ETIMEDOUT;
 
 	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0) {
-		ret = -EINVAL;
-		goto cleanup;
-	}
+	    vstor_packet->status != 0)
+		return -EINVAL;
 
 
 	for (i = 0; i < ARRAY_SIZE(vmstor_protocols); i++) {
@@ -764,18 +786,14 @@ static int storvsc_channel_init(struct hv_device *device)
 			       VM_PKT_DATA_INBAND,
 			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
 		if (ret != 0)
-			goto cleanup;
+			return ret;
 
 		t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-		if (t == 0) {
-			ret = -ETIMEDOUT;
-			goto cleanup;
-		}
+		if (t == 0)
+			return -ETIMEDOUT;
 
-		if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO) {
-			ret = -EINVAL;
-			goto cleanup;
-		}
+		if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO)
+			return -EINVAL;
 
 		if (vstor_packet->status == 0) {
 			vmstor_proto_version =
@@ -791,10 +809,8 @@ static int storvsc_channel_init(struct hv_device *device)
 		}
 	}
 
-	if (vstor_packet->status != 0) {
-		ret = -EINVAL;
-		goto cleanup;
-	}
+	if (vstor_packet->status != 0)
+		return -EINVAL;
 
 
 	memset(vstor_packet, 0, sizeof(struct vstor_packet));
@@ -809,19 +825,15 @@ static int storvsc_channel_init(struct hv_device *device)
 			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
 
 	if (ret != 0)
-		goto cleanup;
+		return ret;
 
 	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-	if (t == 0) {
-		ret = -ETIMEDOUT;
-		goto cleanup;
-	}
+	if (t == 0)
+		return -ETIMEDOUT;
 
 	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0) {
-		ret = -EINVAL;
-		goto cleanup;
-	}
+	    vstor_packet->status != 0)
+		return -EINVAL;
 
 	/*
 	 * Check to see if multi-channel support is there.
@@ -837,6 +849,38 @@ static int storvsc_channel_init(struct hv_device *device)
 	stor_device->max_transfer_bytes =
 		vstor_packet->storage_channel_properties.max_transfer_bytes;
 
+	if (!is_fc)
+		goto done;
+
+	memset(vstor_packet, 0, sizeof(struct vstor_packet));
+	vstor_packet->operation = VSTOR_OPERATION_FCHBA_DATA;
+	vstor_packet->flags = REQUEST_COMPLETION_FLAG;
+
+	ret = vmbus_sendpacket(device->channel, vstor_packet,
+			       (sizeof(struct vstor_packet) -
+			       vmscsi_size_delta),
+			       (unsigned long)request,
+			       VM_PKT_DATA_INBAND,
+			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+
+	if (ret != 0)
+		return ret;
+
+	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
+	if (t == 0)
+		return -ETIMEDOUT;
+
+	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
+	    vstor_packet->status != 0)
+		return -EINVAL;
+
+	/*
+	 * Cache the currently active port and node ww names.
+	 */
+	cache_wwn(stor_device, vstor_packet);
+
+done:
+
 	memset(vstor_packet, 0, sizeof(struct vstor_packet));
 	vstor_packet->operation = VSTOR_OPERATION_END_INITIALIZATION;
 	vstor_packet->flags = REQUEST_COMPLETION_FLAG;
@@ -849,25 +893,19 @@ static int storvsc_channel_init(struct hv_device *device)
 			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
 
 	if (ret != 0)
-		goto cleanup;
+		return ret;
 
 	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-	if (t == 0) {
-		ret = -ETIMEDOUT;
-		goto cleanup;
-	}
+	if (t == 0)
+		return -ETIMEDOUT;
 
 	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0) {
-		ret = -EINVAL;
-		goto cleanup;
-	}
+	    vstor_packet->status != 0)
+		return -EINVAL;
 
 	if (process_sub_channels)
 		handle_multichannel_storage(device, max_chns);
 
-
-cleanup:
 	return ret;
 }
 
@@ -1076,6 +1114,12 @@ static void storvsc_on_receive(struct hv_device *device,
 		schedule_work(&work->work);
 		break;
 
+	case VSTOR_OPERATION_FCHBA_DATA:
+		stor_device = get_in_stor_device(device);
+		cache_wwn(stor_device, vstor_packet);
+		fc_host_node_name(stor_device->host) = stor_device->node_name;
+		fc_host_port_name(stor_device->host) = stor_device->port_name;
+		break;
 	default:
 		break;
 	}
@@ -1131,7 +1175,8 @@ static void storvsc_on_channel_callback(void *context)
 	return;
 }
 
-static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)
+static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size,
+				  bool is_fc)
 {
 	struct vmstorage_channel_properties props;
 	int ret;
@@ -1148,7 +1193,7 @@ static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)
 	if (ret != 0)
 		return ret;
 
-	ret = storvsc_channel_init(device);
+	ret = storvsc_channel_init(device, is_fc);
 
 	return ret;
 }
@@ -1573,6 +1618,7 @@ static int storvsc_probe(struct hv_device *device,
 	struct Scsi_Host *host;
 	struct hv_host_device *host_dev;
 	bool dev_is_ide = ((dev_id->driver_data == IDE_GUID) ? true : false);
+	bool is_fc = ((dev_id->driver_data == SFC_GUID) ? true : false);
 	int target = 0;
 	struct storvsc_device *stor_device;
 	int max_luns_per_target;
@@ -1630,7 +1676,7 @@ static int storvsc_probe(struct hv_device *device,
 	hv_set_drvdata(device, stor_device);
 
 	stor_device->port_number = host->host_no;
-	ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size);
+	ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size, is_fc);
 	if (ret)
 		goto err_out1;
 
@@ -1642,6 +1688,7 @@ static int storvsc_probe(struct hv_device *device,
 		host->max_lun = STORVSC_FC_MAX_LUNS_PER_TARGET;
 		host->max_id = STORVSC_FC_MAX_TARGETS;
 		host->max_channel = STORVSC_FC_MAX_CHANNELS - 1;
+		host->transportt = fc_transport_template;
 		break;
 
 	case SCSI_GUID:
@@ -1681,6 +1728,10 @@ static int storvsc_probe(struct hv_device *device,
 			goto err_out2;
 		}
 	}
+	if (host->transportt == fc_transport_template) {
+		fc_host_node_name(host) = stor_device->node_name;
+		fc_host_port_name(host) = stor_device->port_name;
+	}
 	return 0;
 
 err_out2:
@@ -1706,6 +1757,8 @@ static int storvsc_remove(struct hv_device *dev)
 	struct storvsc_device *stor_device = hv_get_drvdata(dev);
 	struct Scsi_Host *host = stor_device->host;
 
+	if (host->transportt == fc_transport_template)
+		fc_remove_host(host);
 	scsi_remove_host(host);
 	storvsc_dev_remove(dev);
 	scsi_host_put(host);
@@ -1720,8 +1773,14 @@ static struct hv_driver storvsc_drv = {
 	.remove = storvsc_remove,
 };
 
+static struct fc_function_template fc_transport_functions = {
+	.show_host_node_name = 1,
+	.show_host_port_name = 1,
+};
+
 static int __init storvsc_drv_init(void)
 {
+	int ret;
 
 	/*
 	 * Divide the ring buffer data size (which is 1 page less
@@ -1736,12 +1795,21 @@ static int __init storvsc_drv_init(void)
 		vmscsi_size_delta,
 		sizeof(u64)));
 
-	return vmbus_driver_register(&storvsc_drv);
+	fc_transport_template = fc_attach_transport(&fc_transport_functions);
+	if (!fc_transport_template)
+		return -ENODEV;
+
+	ret = vmbus_driver_register(&storvsc_drv);
+	if (ret)
+		fc_release_transport(fc_transport_template);
+
+	return ret;
 }
 
 static void __exit storvsc_drv_exit(void)
 {
 	vmbus_driver_unregister(&storvsc_drv);
+	fc_release_transport(fc_transport_template);
 }
 
 MODULE_LICENSE("GPL");
-- 
1.7.4.1

[PATCH V2 2/4] scsi: storvsc: Properly support Fibre Channel devices

[K. Y. Srinivasan]

For FC devices managed by this driver, atttach the appropriate transport
template. This will allow us to create the appropriate sysfs files for
these devices. With this we can publish the wwn for both the port and the node.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Tested-by: Alex Ng <alexng@microsoft.com>
---
	V2: Fixed error paths - Dan Carpenter <dan.carpenter@oracle.com>

 drivers/scsi/storvsc_drv.c |  162 +++++++++++++++++++++++++++++++-------------
 1 files changed, 115 insertions(+), 47 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 00bb4bd..ab9828c 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -41,6 +41,7 @@
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_devinfo.h>
 #include <scsi/scsi_dbg.h>
+#include <scsi/scsi_transport_fc.h>
 
 /*
  * All wire protocol details (storage protocol between the guest and the host)
@@ -397,6 +398,7 @@ static int storvsc_timeout = 180;
 
 static int msft_blist_flags = BLIST_TRY_VPD_PAGES;
 
+static struct scsi_transport_template *fc_transport_template;
 
 static void storvsc_on_channel_callback(void *context);
 
@@ -456,6 +458,11 @@ struct storvsc_device {
 	/* Used for vsc/vsp channel reset process */
 	struct storvsc_cmd_request init_request;
 	struct storvsc_cmd_request reset_request;
+	/*
+	 * Currently active port and node names for FC devices.
+	 */
+	u64 node_name;
+	u64 port_name;
 };
 
 struct hv_host_device {
@@ -695,7 +702,26 @@ static void  handle_multichannel_storage(struct hv_device *device, int max_chns)
 	vmbus_are_subchannels_present(device->channel);
 }
 
-static int storvsc_channel_init(struct hv_device *device)
+static void cache_wwn(struct storvsc_device *stor_device,
+		      struct vstor_packet *vstor_packet)
+{
+	/*
+	 * Cache the currently active port and node ww names.
+	 */
+	if (vstor_packet->wwn_packet.primary_active) {
+		stor_device->node_name =
+			wwn_to_u64(vstor_packet->wwn_packet.primary_node_wwn);
+		stor_device->port_name =
+			wwn_to_u64(vstor_packet->wwn_packet.primary_port_wwn);
+	} else {
+		stor_device->node_name =
+			wwn_to_u64(vstor_packet->wwn_packet.secondary_node_wwn);
+		stor_device->port_name =
+			wwn_to_u64(vstor_packet->wwn_packet.secondary_port_wwn);
+	}
+}
+
+static int storvsc_channel_init(struct hv_device *device, bool is_fc)
 {
 	struct storvsc_device *stor_device;
 	struct storvsc_cmd_request *request;
@@ -727,19 +753,15 @@ static int storvsc_channel_init(struct hv_device *device)
 			       VM_PKT_DATA_INBAND,
 			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
 	if (ret != 0)
-		goto cleanup;
+		return ret;
 
 	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-	if (t == 0) {
-		ret = -ETIMEDOUT;
-		goto cleanup;
-	}
+	if (t == 0)
+		return -ETIMEDOUT;
 
 	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0) {
-		ret = -EINVAL;
-		goto cleanup;
-	}
+	    vstor_packet->status != 0)
+		return -EINVAL;
 
 
 	for (i = 0; i < ARRAY_SIZE(vmstor_protocols); i++) {
@@ -764,18 +786,14 @@ static int storvsc_channel_init(struct hv_device *device)
 			       VM_PKT_DATA_INBAND,
 			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
 		if (ret != 0)
-			goto cleanup;
+			return ret;
 
 		t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-		if (t == 0) {
-			ret = -ETIMEDOUT;
-			goto cleanup;
-		}
+		if (t == 0)
+			return -ETIMEDOUT;
 
-		if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO) {
-			ret = -EINVAL;
-			goto cleanup;
-		}
+		if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO)
+			return -EINVAL;
 
 		if (vstor_packet->status == 0) {
 			vmstor_proto_version =
@@ -791,10 +809,8 @@ static int storvsc_channel_init(struct hv_device *device)
 		}
 	}
 
-	if (vstor_packet->status != 0) {
-		ret = -EINVAL;
-		goto cleanup;
-	}
+	if (vstor_packet->status != 0)
+		return -EINVAL;
 
 
 	memset(vstor_packet, 0, sizeof(struct vstor_packet));
@@ -809,19 +825,15 @@ static int storvsc_channel_init(struct hv_device *device)
 			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
 
 	if (ret != 0)
-		goto cleanup;
+		return ret;
 
 	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-	if (t == 0) {
-		ret = -ETIMEDOUT;
-		goto cleanup;
-	}
+	if (t == 0)
+		return -ETIMEDOUT;
 
 	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0) {
-		ret = -EINVAL;
-		goto cleanup;
-	}
+	    vstor_packet->status != 0)
+		return -EINVAL;
 
 	/*
 	 * Check to see if multi-channel support is there.
@@ -837,6 +849,38 @@ static int storvsc_channel_init(struct hv_device *device)
 	stor_device->max_transfer_bytes =
 		vstor_packet->storage_channel_properties.max_transfer_bytes;
 
+	if (!is_fc)
+		goto done;
+
+	memset(vstor_packet, 0, sizeof(struct vstor_packet));
+	vstor_packet->operation = VSTOR_OPERATION_FCHBA_DATA;
+	vstor_packet->flags = REQUEST_COMPLETION_FLAG;
+
+	ret = vmbus_sendpacket(device->channel, vstor_packet,
+			       (sizeof(struct vstor_packet) -
+			       vmscsi_size_delta),
+			       (unsigned long)request,
+			       VM_PKT_DATA_INBAND,
+			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+
+	if (ret != 0)
+		return ret;
+
+	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
+	if (t == 0)
+		return -ETIMEDOUT;
+
+	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
+	    vstor_packet->status != 0)
+		return -EINVAL;
+
+	/*
+	 * Cache the currently active port and node ww names.
+	 */
+	cache_wwn(stor_device, vstor_packet);
+
+done:
+
 	memset(vstor_packet, 0, sizeof(struct vstor_packet));
 	vstor_packet->operation = VSTOR_OPERATION_END_INITIALIZATION;
 	vstor_packet->flags = REQUEST_COMPLETION_FLAG;
@@ -849,25 +893,19 @@ static int storvsc_channel_init(struct hv_device *device)
 			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
 
 	if (ret != 0)
-		goto cleanup;
+		return ret;
 
 	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-	if (t == 0) {
-		ret = -ETIMEDOUT;
-		goto cleanup;
-	}
+	if (t == 0)
+		return -ETIMEDOUT;
 
 	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0) {
-		ret = -EINVAL;
-		goto cleanup;
-	}
+	    vstor_packet->status != 0)
+		return -EINVAL;
 
 	if (process_sub_channels)
 		handle_multichannel_storage(device, max_chns);
 
-
-cleanup:
 	return ret;
 }
 
@@ -1076,6 +1114,12 @@ static void storvsc_on_receive(struct hv_device *device,
 		schedule_work(&work->work);
 		break;
 
+	case VSTOR_OPERATION_FCHBA_DATA:
+		stor_device = get_in_stor_device(device);
+		cache_wwn(stor_device, vstor_packet);
+		fc_host_node_name(stor_device->host) = stor_device->node_name;
+		fc_host_port_name(stor_device->host) = stor_device->port_name;
+		break;
 	default:
 		break;
 	}
@@ -1131,7 +1175,8 @@ static void storvsc_on_channel_callback(void *context)
 	return;
 }
 
-static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)
+static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size,
+				  bool is_fc)
 {
 	struct vmstorage_channel_properties props;
 	int ret;
@@ -1148,7 +1193,7 @@ static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size)
 	if (ret != 0)
 		return ret;
 
-	ret = storvsc_channel_init(device);
+	ret = storvsc_channel_init(device, is_fc);
 
 	return ret;
 }
@@ -1573,6 +1618,7 @@ static int storvsc_probe(struct hv_device *device,
 	struct Scsi_Host *host;
 	struct hv_host_device *host_dev;
 	bool dev_is_ide = ((dev_id->driver_data == IDE_GUID) ? true : false);
+	bool is_fc = ((dev_id->driver_data == SFC_GUID) ? true : false);
 	int target = 0;
 	struct storvsc_device *stor_device;
 	int max_luns_per_target;
@@ -1630,7 +1676,7 @@ static int storvsc_probe(struct hv_device *device,
 	hv_set_drvdata(device, stor_device);
 
 	stor_device->port_number = host->host_no;
-	ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size);
+	ret = storvsc_connect_to_vsp(device, storvsc_ringbuffer_size, is_fc);
 	if (ret)
 		goto err_out1;
 
@@ -1642,6 +1688,7 @@ static int storvsc_probe(struct hv_device *device,
 		host->max_lun = STORVSC_FC_MAX_LUNS_PER_TARGET;
 		host->max_id = STORVSC_FC_MAX_TARGETS;
 		host->max_channel = STORVSC_FC_MAX_CHANNELS - 1;
+		host->transportt = fc_transport_template;
 		break;
 
 	case SCSI_GUID:
@@ -1681,6 +1728,10 @@ static int storvsc_probe(struct hv_device *device,
 			goto err_out2;
 		}
 	}
+	if (host->transportt == fc_transport_template) {
+		fc_host_node_name(host) = stor_device->node_name;
+		fc_host_port_name(host) = stor_device->port_name;
+	}
 	return 0;
 
 err_out2:
@@ -1706,6 +1757,8 @@ static int storvsc_remove(struct hv_device *dev)
 	struct storvsc_device *stor_device = hv_get_drvdata(dev);
 	struct Scsi_Host *host = stor_device->host;
 
+	if (host->transportt == fc_transport_template)
+		fc_remove_host(host);
 	scsi_remove_host(host);
 	storvsc_dev_remove(dev);
 	scsi_host_put(host);
@@ -1720,8 +1773,14 @@ static struct hv_driver storvsc_drv = {
 	.remove = storvsc_remove,
 };
 
+static struct fc_function_template fc_transport_functions = {
+	.show_host_node_name = 1,
+	.show_host_port_name = 1,
+};
+
 static int __init storvsc_drv_init(void)
 {
+	int ret;
 
 	/*
 	 * Divide the ring buffer data size (which is 1 page less
@@ -1736,12 +1795,21 @@ static int __init storvsc_drv_init(void)
 		vmscsi_size_delta,
 		sizeof(u64)));
 
-	return vmbus_driver_register(&storvsc_drv);
+	fc_transport_template = fc_attach_transport(&fc_transport_functions);
+	if (!fc_transport_template)
+		return -ENODEV;
+
+	ret = vmbus_driver_register(&storvsc_drv);
+	if (ret)
+		fc_release_transport(fc_transport_template);
+
+	return ret;
 }
 
 static void __exit storvsc_drv_exit(void)
 {
 	vmbus_driver_unregister(&storvsc_drv);
+	fc_release_transport(fc_transport_template);
 }
 
 MODULE_LICENSE("GPL");
-- 
1.7.4.1

[PATCH V2 3/4] scsi: storvsc: Refactor the code in storvsc_channel_init()

[K. Y. Srinivasan]

The function storvsc_channel_init() repeatedly interacts with the host to
extract various channel properties. Refactor this code to eliminate code
repetition.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Alex Ng <alexng@microsoft.com>
---
	V2: Fixed error paths - Dan Carpenter <dan.carpenter@oracle.com>

 drivers/scsi/storvsc_drv.c |  126 ++++++++++++++++----------------------------
 1 files changed, 46 insertions(+), 80 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index ab9828c..947f812 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -721,29 +721,17 @@ static void cache_wwn(struct storvsc_device *stor_device,
 	}
 }
 
-static int storvsc_channel_init(struct hv_device *device, bool is_fc)
+
+static int storvsc_execute_vstor_op(struct hv_device *device,
+				    struct storvsc_cmd_request *request,
+				    bool status_check)
 {
-	struct storvsc_device *stor_device;
-	struct storvsc_cmd_request *request;
 	struct vstor_packet *vstor_packet;
-	int ret, t, i;
-	int max_chns;
-	bool process_sub_channels = false;
-
-	stor_device = get_out_stor_device(device);
-	if (!stor_device)
-		return -ENODEV;
+	int ret, t;
 
-	request = &stor_device->init_request;
 	vstor_packet = &request->vstor_packet;
 
-	/*
-	 * Now, initiate the vsc/vsp initialization protocol on the open
-	 * channel
-	 */
-	memset(request, 0, sizeof(struct storvsc_cmd_request));
 	init_completion(&request->wait_event);
-	vstor_packet->operation = VSTOR_OPERATION_BEGIN_INITIALIZATION;
 	vstor_packet->flags = REQUEST_COMPLETION_FLAG;
 
 	ret = vmbus_sendpacket(device->channel, vstor_packet,
@@ -759,17 +747,50 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)
 	if (t == 0)
 		return -ETIMEDOUT;
 
+	if (!status_check)
+		return ret;
+
 	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
 	    vstor_packet->status != 0)
 		return -EINVAL;
 
+	return ret;
+}
+
+static int storvsc_channel_init(struct hv_device *device, bool is_fc)
+{
+	struct storvsc_device *stor_device;
+	struct storvsc_cmd_request *request;
+	struct vstor_packet *vstor_packet;
+	int ret, i;
+	int max_chns;
+	bool process_sub_channels = false;
+
+	stor_device = get_out_stor_device(device);
+	if (!stor_device)
+		return -ENODEV;
+
+	request = &stor_device->init_request;
+	vstor_packet = &request->vstor_packet;
+
+	/*
+	 * Now, initiate the vsc/vsp initialization protocol on the open
+	 * channel
+	 */
+	memset(request, 0, sizeof(struct storvsc_cmd_request));
+	vstor_packet->operation = VSTOR_OPERATION_BEGIN_INITIALIZATION;
+	ret = storvsc_execute_vstor_op(device, request, true);
+	if (ret)
+		return ret;
+	/*
+	 * Query host supported protocol version.
+	 */
 
 	for (i = 0; i < ARRAY_SIZE(vmstor_protocols); i++) {
 		/* reuse the packet for version range supported */
 		memset(vstor_packet, 0, sizeof(struct vstor_packet));
 		vstor_packet->operation =
 			VSTOR_OPERATION_QUERY_PROTOCOL_VERSION;
-		vstor_packet->flags = REQUEST_COMPLETION_FLAG;
 
 		vstor_packet->version.major_minor =
 			vmstor_protocols[i].protocol_version;
@@ -778,20 +799,10 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)
 		 * The revision number is only used in Windows; set it to 0.
 		 */
 		vstor_packet->version.revision = 0;
-
-		ret = vmbus_sendpacket(device->channel, vstor_packet,
-			       (sizeof(struct vstor_packet) -
-				vmscsi_size_delta),
-			       (unsigned long)request,
-			       VM_PKT_DATA_INBAND,
-			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+		ret = storvsc_execute_vstor_op(device, request, false);
 		if (ret != 0)
 			return ret;
 
-		t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-		if (t == 0)
-			return -ETIMEDOUT;
-
 		if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO)
 			return -EINVAL;
 
@@ -815,26 +826,10 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)
 
 	memset(vstor_packet, 0, sizeof(struct vstor_packet));
 	vstor_packet->operation = VSTOR_OPERATION_QUERY_PROPERTIES;
-	vstor_packet->flags = REQUEST_COMPLETION_FLAG;
-
-	ret = vmbus_sendpacket(device->channel, vstor_packet,
-			       (sizeof(struct vstor_packet) -
-				vmscsi_size_delta),
-			       (unsigned long)request,
-			       VM_PKT_DATA_INBAND,
-			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
-
+	ret = storvsc_execute_vstor_op(device, request, true);
 	if (ret != 0)
 		return ret;
 
-	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-	if (t == 0)
-		return -ETIMEDOUT;
-
-	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0)
-		return -EINVAL;
-
 	/*
 	 * Check to see if multi-channel support is there.
 	 * Hosts that implement protocol version of 5.1 and above
@@ -852,28 +847,15 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)
 	if (!is_fc)
 		goto done;
 
+	/*
+	 * For FC devices retrieve FC HBA data.
+	 */
 	memset(vstor_packet, 0, sizeof(struct vstor_packet));
 	vstor_packet->operation = VSTOR_OPERATION_FCHBA_DATA;
-	vstor_packet->flags = REQUEST_COMPLETION_FLAG;
-
-	ret = vmbus_sendpacket(device->channel, vstor_packet,
-			       (sizeof(struct vstor_packet) -
-			       vmscsi_size_delta),
-			       (unsigned long)request,
-			       VM_PKT_DATA_INBAND,
-			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
-
+	ret = storvsc_execute_vstor_op(device, request, true);
 	if (ret != 0)
 		return ret;
 
-	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-	if (t == 0)
-		return -ETIMEDOUT;
-
-	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0)
-		return -EINVAL;
-
 	/*
 	 * Cache the currently active port and node ww names.
 	 */
@@ -883,26 +865,10 @@ done:
 
 	memset(vstor_packet, 0, sizeof(struct vstor_packet));
 	vstor_packet->operation = VSTOR_OPERATION_END_INITIALIZATION;
-	vstor_packet->flags = REQUEST_COMPLETION_FLAG;
-
-	ret = vmbus_sendpacket(device->channel, vstor_packet,
-			       (sizeof(struct vstor_packet) -
-				vmscsi_size_delta),
-			       (unsigned long)request,
-			       VM_PKT_DATA_INBAND,
-			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
-
+	ret = storvsc_execute_vstor_op(device, request, true);
 	if (ret != 0)
 		return ret;
 
-	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-	if (t == 0)
-		return -ETIMEDOUT;
-
-	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0)
-		return -EINVAL;
-
 	if (process_sub_channels)
 		handle_multichannel_storage(device, max_chns);
 
-- 
1.7.4.1

[PATCH V2 3/4] scsi: storvsc: Refactor the code in storvsc_channel_init()

[K. Y. Srinivasan]

The function storvsc_channel_init() repeatedly interacts with the host to
extract various channel properties. Refactor this code to eliminate code
repetition.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Alex Ng <alexng@microsoft.com>
---
	V2: Fixed error paths - Dan Carpenter <dan.carpenter@oracle.com>

 drivers/scsi/storvsc_drv.c |  126 ++++++++++++++++----------------------------
 1 files changed, 46 insertions(+), 80 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index ab9828c..947f812 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -721,29 +721,17 @@ static void cache_wwn(struct storvsc_device *stor_device,
 	}
 }
 
-static int storvsc_channel_init(struct hv_device *device, bool is_fc)
+
+static int storvsc_execute_vstor_op(struct hv_device *device,
+				    struct storvsc_cmd_request *request,
+				    bool status_check)
 {
-	struct storvsc_device *stor_device;
-	struct storvsc_cmd_request *request;
 	struct vstor_packet *vstor_packet;
-	int ret, t, i;
-	int max_chns;
-	bool process_sub_channels = false;
-
-	stor_device = get_out_stor_device(device);
-	if (!stor_device)
-		return -ENODEV;
+	int ret, t;
 
-	request = &stor_device->init_request;
 	vstor_packet = &request->vstor_packet;
 
-	/*
-	 * Now, initiate the vsc/vsp initialization protocol on the open
-	 * channel
-	 */
-	memset(request, 0, sizeof(struct storvsc_cmd_request));
 	init_completion(&request->wait_event);
-	vstor_packet->operation = VSTOR_OPERATION_BEGIN_INITIALIZATION;
 	vstor_packet->flags = REQUEST_COMPLETION_FLAG;
 
 	ret = vmbus_sendpacket(device->channel, vstor_packet,
@@ -759,17 +747,50 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)
 	if (t == 0)
 		return -ETIMEDOUT;
 
+	if (!status_check)
+		return ret;
+
 	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
 	    vstor_packet->status != 0)
 		return -EINVAL;
 
+	return ret;
+}
+
+static int storvsc_channel_init(struct hv_device *device, bool is_fc)
+{
+	struct storvsc_device *stor_device;
+	struct storvsc_cmd_request *request;
+	struct vstor_packet *vstor_packet;
+	int ret, i;
+	int max_chns;
+	bool process_sub_channels = false;
+
+	stor_device = get_out_stor_device(device);
+	if (!stor_device)
+		return -ENODEV;
+
+	request = &stor_device->init_request;
+	vstor_packet = &request->vstor_packet;
+
+	/*
+	 * Now, initiate the vsc/vsp initialization protocol on the open
+	 * channel
+	 */
+	memset(request, 0, sizeof(struct storvsc_cmd_request));
+	vstor_packet->operation = VSTOR_OPERATION_BEGIN_INITIALIZATION;
+	ret = storvsc_execute_vstor_op(device, request, true);
+	if (ret)
+		return ret;
+	/*
+	 * Query host supported protocol version.
+	 */
 
 	for (i = 0; i < ARRAY_SIZE(vmstor_protocols); i++) {
 		/* reuse the packet for version range supported */
 		memset(vstor_packet, 0, sizeof(struct vstor_packet));
 		vstor_packet->operation =
 			VSTOR_OPERATION_QUERY_PROTOCOL_VERSION;
-		vstor_packet->flags = REQUEST_COMPLETION_FLAG;
 
 		vstor_packet->version.major_minor =
 			vmstor_protocols[i].protocol_version;
@@ -778,20 +799,10 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)
 		 * The revision number is only used in Windows; set it to 0.
 		 */
 		vstor_packet->version.revision = 0;
-
-		ret = vmbus_sendpacket(device->channel, vstor_packet,
-			       (sizeof(struct vstor_packet) -
-				vmscsi_size_delta),
-			       (unsigned long)request,
-			       VM_PKT_DATA_INBAND,
-			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+		ret = storvsc_execute_vstor_op(device, request, false);
 		if (ret != 0)
 			return ret;
 
-		t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-		if (t == 0)
-			return -ETIMEDOUT;
-
 		if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO)
 			return -EINVAL;
 
@@ -815,26 +826,10 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)
 
 	memset(vstor_packet, 0, sizeof(struct vstor_packet));
 	vstor_packet->operation = VSTOR_OPERATION_QUERY_PROPERTIES;
-	vstor_packet->flags = REQUEST_COMPLETION_FLAG;
-
-	ret = vmbus_sendpacket(device->channel, vstor_packet,
-			       (sizeof(struct vstor_packet) -
-				vmscsi_size_delta),
-			       (unsigned long)request,
-			       VM_PKT_DATA_INBAND,
-			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
-
+	ret = storvsc_execute_vstor_op(device, request, true);
 	if (ret != 0)
 		return ret;
 
-	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-	if (t == 0)
-		return -ETIMEDOUT;
-
-	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0)
-		return -EINVAL;
-
 	/*
 	 * Check to see if multi-channel support is there.
 	 * Hosts that implement protocol version of 5.1 and above
@@ -852,28 +847,15 @@ static int storvsc_channel_init(struct hv_device *device, bool is_fc)
 	if (!is_fc)
 		goto done;
 
+	/*
+	 * For FC devices retrieve FC HBA data.
+	 */
 	memset(vstor_packet, 0, sizeof(struct vstor_packet));
 	vstor_packet->operation = VSTOR_OPERATION_FCHBA_DATA;
-	vstor_packet->flags = REQUEST_COMPLETION_FLAG;
-
-	ret = vmbus_sendpacket(device->channel, vstor_packet,
-			       (sizeof(struct vstor_packet) -
-			       vmscsi_size_delta),
-			       (unsigned long)request,
-			       VM_PKT_DATA_INBAND,
-			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
-
+	ret = storvsc_execute_vstor_op(device, request, true);
 	if (ret != 0)
 		return ret;
 
-	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-	if (t == 0)
-		return -ETIMEDOUT;
-
-	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0)
-		return -EINVAL;
-
 	/*
 	 * Cache the currently active port and node ww names.
 	 */
@@ -883,26 +865,10 @@ done:
 
 	memset(vstor_packet, 0, sizeof(struct vstor_packet));
 	vstor_packet->operation = VSTOR_OPERATION_END_INITIALIZATION;
-	vstor_packet->flags = REQUEST_COMPLETION_FLAG;
-
-	ret = vmbus_sendpacket(device->channel, vstor_packet,
-			       (sizeof(struct vstor_packet) -
-				vmscsi_size_delta),
-			       (unsigned long)request,
-			       VM_PKT_DATA_INBAND,
-			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
-
+	ret = storvsc_execute_vstor_op(device, request, true);
 	if (ret != 0)
 		return ret;
 
-	t = wait_for_completion_timeout(&request->wait_event, 5*HZ);
-	if (t == 0)
-		return -ETIMEDOUT;
-
-	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0)
-		return -EINVAL;
-
 	if (process_sub_channels)
 		handle_multichannel_storage(device, max_chns);
 
-- 
1.7.4.1

[PATCH V2 4/4] scsi: storvsc: Tighten up the interrupt path

[K. Y. Srinivasan]

On the interrupt path, we repeatedly establish the pointer to the
storvsc_device. Fix this.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Alex Ng <alexng@microsoft.com>
---
 drivers/scsi/storvsc_drv.c |   23 ++++++++---------------
 1 files changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 947f812..3d3d157 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -943,19 +943,16 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb,
 }
 
 
-static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
+static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request,
+				       struct storvsc_device *stor_dev)
 {
 	struct scsi_cmnd *scmnd = cmd_request->cmd;
-	struct hv_host_device *host_dev = shost_priv(scmnd->device->host);
 	struct scsi_sense_hdr sense_hdr;
 	struct vmscsi_request *vm_srb;
 	struct Scsi_Host *host;
-	struct storvsc_device *stor_dev;
-	struct hv_device *dev = host_dev->dev;
 	u32 payload_sz = cmd_request->payload_sz;
 	void *payload = cmd_request->payload;
 
-	stor_dev = get_in_stor_device(dev);
 	host = stor_dev->host;
 
 	vm_srb = &cmd_request->vstor_packet.vm_srb;
@@ -985,14 +982,13 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
 		kfree(payload);
 }
 
-static void storvsc_on_io_completion(struct hv_device *device,
+static void storvsc_on_io_completion(struct storvsc_device *stor_device,
 				  struct vstor_packet *vstor_packet,
 				  struct storvsc_cmd_request *request)
 {
-	struct storvsc_device *stor_device;
 	struct vstor_packet *stor_pkt;
+	struct hv_device *device = stor_device->device;
 
-	stor_device = hv_get_drvdata(device);
 	stor_pkt = &request->vstor_packet;
 
 	/*
@@ -1047,7 +1043,7 @@ static void storvsc_on_io_completion(struct hv_device *device,
 	stor_pkt->vm_srb.data_transfer_length =
 	vstor_packet->vm_srb.data_transfer_length;
 
-	storvsc_command_completion(request);
+	storvsc_command_completion(request, stor_device);
 
 	if (atomic_dec_and_test(&stor_device->num_outstanding_req) &&
 		stor_device->drain_notify)
@@ -1056,21 +1052,19 @@ static void storvsc_on_io_completion(struct hv_device *device,
 
 }
 
-static void storvsc_on_receive(struct hv_device *device,
+static void storvsc_on_receive(struct storvsc_device *stor_device,
 			     struct vstor_packet *vstor_packet,
 			     struct storvsc_cmd_request *request)
 {
 	struct storvsc_scan_work *work;
-	struct storvsc_device *stor_device;
 
 	switch (vstor_packet->operation) {
 	case VSTOR_OPERATION_COMPLETE_IO:
-		storvsc_on_io_completion(device, vstor_packet, request);
+		storvsc_on_io_completion(stor_device, vstor_packet, request);
 		break;
 
 	case VSTOR_OPERATION_REMOVE_DEVICE:
 	case VSTOR_OPERATION_ENUMERATE_BUS:
-		stor_device = get_in_stor_device(device);
 		work = kmalloc(sizeof(struct storvsc_scan_work), GFP_ATOMIC);
 		if (!work)
 			return;
@@ -1081,7 +1075,6 @@ static void storvsc_on_receive(struct hv_device *device,
 		break;
 
 	case VSTOR_OPERATION_FCHBA_DATA:
-		stor_device = get_in_stor_device(device);
 		cache_wwn(stor_device, vstor_packet);
 		fc_host_node_name(stor_device->host) = stor_device->node_name;
 		fc_host_port_name(stor_device->host) = stor_device->port_name;
@@ -1129,7 +1122,7 @@ static void storvsc_on_channel_callback(void *context)
 					vmscsi_size_delta));
 				complete(&request->wait_event);
 			} else {
-				storvsc_on_receive(device,
+				storvsc_on_receive(stor_device,
 						(struct vstor_packet *)packet,
 						request);
 			}
-- 
1.7.4.1

[PATCH V2 4/4] scsi: storvsc: Tighten up the interrupt path

[K. Y. Srinivasan]

On the interrupt path, we repeatedly establish the pointer to the
storvsc_device. Fix this.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Alex Ng <alexng@microsoft.com>
---
 drivers/scsi/storvsc_drv.c |   23 ++++++++---------------
 1 files changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 947f812..3d3d157 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -943,19 +943,16 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb,
 }
 
 
-static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
+static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request,
+				       struct storvsc_device *stor_dev)
 {
 	struct scsi_cmnd *scmnd = cmd_request->cmd;
-	struct hv_host_device *host_dev = shost_priv(scmnd->device->host);
 	struct scsi_sense_hdr sense_hdr;
 	struct vmscsi_request *vm_srb;
 	struct Scsi_Host *host;
-	struct storvsc_device *stor_dev;
-	struct hv_device *dev = host_dev->dev;
 	u32 payload_sz = cmd_request->payload_sz;
 	void *payload = cmd_request->payload;
 
-	stor_dev = get_in_stor_device(dev);
 	host = stor_dev->host;
 
 	vm_srb = &cmd_request->vstor_packet.vm_srb;
@@ -985,14 +982,13 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
 		kfree(payload);
 }
 
-static void storvsc_on_io_completion(struct hv_device *device,
+static void storvsc_on_io_completion(struct storvsc_device *stor_device,
 				  struct vstor_packet *vstor_packet,
 				  struct storvsc_cmd_request *request)
 {
-	struct storvsc_device *stor_device;
 	struct vstor_packet *stor_pkt;
+	struct hv_device *device = stor_device->device;
 
-	stor_device = hv_get_drvdata(device);
 	stor_pkt = &request->vstor_packet;
 
 	/*
@@ -1047,7 +1043,7 @@ static void storvsc_on_io_completion(struct hv_device *device,
 	stor_pkt->vm_srb.data_transfer_length =
 	vstor_packet->vm_srb.data_transfer_length;
 
-	storvsc_command_completion(request);
+	storvsc_command_completion(request, stor_device);
 
 	if (atomic_dec_and_test(&stor_device->num_outstanding_req) &&
 		stor_device->drain_notify)
@@ -1056,21 +1052,19 @@ static void storvsc_on_io_completion(struct hv_device *device,
 
 }
 
-static void storvsc_on_receive(struct hv_device *device,
+static void storvsc_on_receive(struct storvsc_device *stor_device,
 			     struct vstor_packet *vstor_packet,
 			     struct storvsc_cmd_request *request)
 {
 	struct storvsc_scan_work *work;
-	struct storvsc_device *stor_device;
 
 	switch (vstor_packet->operation) {
 	case VSTOR_OPERATION_COMPLETE_IO:
-		storvsc_on_io_completion(device, vstor_packet, request);
+		storvsc_on_io_completion(stor_device, vstor_packet, request);
 		break;
 
 	case VSTOR_OPERATION_REMOVE_DEVICE:
 	case VSTOR_OPERATION_ENUMERATE_BUS:
-		stor_device = get_in_stor_device(device);
 		work = kmalloc(sizeof(struct storvsc_scan_work), GFP_ATOMIC);
 		if (!work)
 			return;
@@ -1081,7 +1075,6 @@ static void storvsc_on_receive(struct hv_device *device,
 		break;
 
 	case VSTOR_OPERATION_FCHBA_DATA:
-		stor_device = get_in_stor_device(device);
 		cache_wwn(stor_device, vstor_packet);
 		fc_host_node_name(stor_device->host) = stor_device->node_name;
 		fc_host_port_name(stor_device->host) = stor_device->port_name;
@@ -1129,7 +1122,7 @@ static void storvsc_on_channel_callback(void *context)
 					vmscsi_size_delta));
 				complete(&request->wait_event);
 			} else {
-				storvsc_on_receive(device,
+				storvsc_on_receive(stor_device,
 						(struct vstor_packet *)packet,
 						request);
 			}
-- 
1.7.4.1

Re: [PATCH V2 2/4] scsi: storvsc: Properly support Fibre Channel devices

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1151 bytes --]

Hi Srinivasan,

[auto build test ERROR on scsi/for-next]
[also build test ERROR on v4.4-rc4 next-20151211]

url:    https://github.com/0day-ci/linux/commits/K-Y-Srinivasan/scsi-storvsc-Properly-support-FC-hosts/20151213-042209
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git for-next
config: x86_64-randconfig-s4-12130552 (attached as .config)
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

   drivers/built-in.o: In function `storvsc_remove':
>> storvsc_drv.c:(.text+0x2e3e58): undefined reference to `fc_remove_host'
   drivers/built-in.o: In function `storvsc_drv_init':
>> storvsc_drv.c:(.init.text+0x107bf): undefined reference to `fc_attach_transport'
>> storvsc_drv.c:(.init.text+0x107f9): undefined reference to `fc_release_transport'
   drivers/built-in.o: In function `storvsc_drv_exit':
>> storvsc_drv.c:(.exit.text+0x1eb1): undefined reference to `fc_release_transport'

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 23843 bytes --]

Re: [PATCH V2 2/4] scsi: storvsc: Properly support Fibre Channel devices

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1151 bytes --]

Hi Srinivasan,

[auto build test ERROR on scsi/for-next]
[also build test ERROR on v4.4-rc4 next-20151211]

url:    https://github.com/0day-ci/linux/commits/K-Y-Srinivasan/scsi-storvsc-Properly-support-FC-hosts/20151213-042209
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git for-next
config: x86_64-randconfig-s4-12130552 (attached as .config)
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

   drivers/built-in.o: In function `storvsc_remove':
>> storvsc_drv.c:(.text+0x2e3e58): undefined reference to `fc_remove_host'
   drivers/built-in.o: In function `storvsc_drv_init':
>> storvsc_drv.c:(.init.text+0x107bf): undefined reference to `fc_attach_transport'
>> storvsc_drv.c:(.init.text+0x107f9): undefined reference to `fc_release_transport'
   drivers/built-in.o: In function `storvsc_drv_exit':
>> storvsc_drv.c:(.exit.text+0x1eb1): undefined reference to `fc_release_transport'

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 23843 bytes --]

[-- Attachment #3: Type: text/plain, Size: 169 bytes --]

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH V2 2/4] scsi: storvsc: Properly support Fibre Channel devices

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 872 bytes --]

Hi Srinivasan,

[auto build test ERROR on scsi/for-next]
[also build test ERROR on v4.4-rc4 next-20151211]

url:    https://github.com/0day-ci/linux/commits/K-Y-Srinivasan/scsi-storvsc-Properly-support-FC-hosts/20151213-042209
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git for-next
config: x86_64-randconfig-h0-12130933 (attached as .config)
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

>> ERROR: "fc_release_transport" [drivers/scsi/hv_storvsc.ko] undefined!
>> ERROR: "fc_remove_host" [drivers/scsi/hv_storvsc.ko] undefined!
>> ERROR: "fc_attach_transport" [drivers/scsi/hv_storvsc.ko] undefined!

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 29783 bytes --]

Re: [PATCH V2 2/4] scsi: storvsc: Properly support Fibre Channel devices

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 872 bytes --]

Hi Srinivasan,

[auto build test ERROR on scsi/for-next]
[also build test ERROR on v4.4-rc4 next-20151211]

url:    https://github.com/0day-ci/linux/commits/K-Y-Srinivasan/scsi-storvsc-Properly-support-FC-hosts/20151213-042209
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git for-next
config: x86_64-randconfig-h0-12130933 (attached as .config)
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

>> ERROR: "fc_release_transport" [drivers/scsi/hv_storvsc.ko] undefined!
>> ERROR: "fc_remove_host" [drivers/scsi/hv_storvsc.ko] undefined!
>> ERROR: "fc_attach_transport" [drivers/scsi/hv_storvsc.ko] undefined!

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 29783 bytes --]

[-- Attachment #3: Type: text/plain, Size: 169 bytes --]

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH V2 0/4] scsi: storvsc: Properly support FC hosts

[Dan Carpenter]

Thanks, K. Y.

regards,
dan carpenter