* [Buildroot] [git commit] linux: don't build appended DTB image in place and support multiple images
@ 2015-12-20 14:23 Thomas Petazzoni
0 siblings, 0 replies; only message in thread
From: Thomas Petazzoni @ 2015-12-20 14:23 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=055e6162bba7edb1db78458e089e151abde625b6
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Currently, the linux.mk logic for appended DTB image does the
appending of the DTB in place, directly at the end of the zImage using
a >> sign. This is incorrect because if you run "make linux-rebuild"
multiple times, you get the DTB appended over and over again to the
image.
Since keeping the 'zImage' or 'uImage' name for the appended DTB image
is not very clear, this commit moves to using the 'zImage.<dtb>' and
'uImage.<dtb>' format. This way, we can clearly distinguish the
original image from the appended one.
In addition, this naming scheme easily allows to generate *multiple*
appended DTB images: from one zImage, you can generate multiple
zImage.<dtb> for several DTBs, and then generate (if requested) the
corresponding uImage.<dtb>.
To achieve this, this commit:
- Changes the definition of LINUX_APPENDED_DTB to iterate over
$(KERNEL_DTS_NAME), and generate a zImage.<dtb> image for each of
them.
- Changes the addition of LINUX_APPENDED_DTB for appended uImage to
also iterate over $(KERNEL_DTS_NAME).
- Provide a different implementation of LINUX_INSTALL_IMAGE which
installs all the appended DTB images (but not the bare image)
- Remove the checks that verified that only one DT name is passed
when appended DTB is used, since we now support generating multiple
DT images.
Some of the tested configuration:
- Normal uImage with several DTBs
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7"
BR2_LINUX_KERNEL_UIMAGE=y
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x200000"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-xp-matrix armada-xp-gp armada-370-mirabox"
Contents of output/images/:
armada-370-mirabox.dtb armada-xp-gp.dtb armada-xp-matrix.dtb uImage
- Normal zImage with several DTBs
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7"
BR2_LINUX_KERNEL_ZIMAGE=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-xp-matrix armada-xp-gp armada-370-mirabox"
Contents of output/images:
armada-370-mirabox.dtb armada-xp-gp.dtb armada-xp-matrix.dtb zImage
- Appended uImage with several DTBs:
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7"
BR2_LINUX_KERNEL_APPENDED_UIMAGE=y
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x200000"
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-xp-matrix armada-xp-gp armada-370-mirabox"
Contents of output/images:
uImage.armada-370-mirabox uImage.armada-xp-gp uImage.armada-xp-matrix
- Appended zImage with several DTBs:
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7"
BR2_LINUX_KERNEL_APPENDED_ZIMAGE=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-xp-matrix armada-xp-gp armada-370-mirabox"
Contents of output/images:
zImage.armada-370-mirabox zImage.armada-xp-gp zImage.armada-xp-matrix
In all configurations, the contents of output/target/boot/ was the
same if BR2_LINUX_KERNEL_INSTALL_TARGET=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
linux/linux.mk | 44 +++++++++++++++++++++++++++-----------------
1 file changed, 27 insertions(+), 17 deletions(-)
diff --git a/linux/linux.mk b/linux/linux.mk
index 536e931..451e681 100644
--- a/linux/linux.mk
+++ b/linux/linux.mk
@@ -272,11 +272,15 @@ endif # BR2_LINUX_KERNEL_DTS_SUPPORT
ifeq ($(BR2_LINUX_KERNEL_APPENDED_DTB),y)
# dtbs moved from arch/$ARCH/boot to arch/$ARCH/boot/dts since 3.8-rc1
define LINUX_APPEND_DTB
- if [ -e $(KERNEL_ARCH_PATH)/boot/$(KERNEL_DTS_NAME).dtb ]; then \
- cat $(KERNEL_ARCH_PATH)/boot/$(KERNEL_DTS_NAME).dtb; \
- else \
- cat $(KERNEL_ARCH_PATH)/boot/dts/$(KERNEL_DTS_NAME).dtb; \
- fi >> $(KERNEL_ARCH_PATH)/boot/zImage
+ (cd $(KERNEL_ARCH_PATH)/boot; \
+ for dtb in $(KERNEL_DTS_NAME); do \
+ if test -e $${dtb}.dtb ; then \
+ dtbpath=$${dtb}.dtb ; \
+ else \
+ dtbpath=dts/$${dtb}.dtb ; \
+ fi ; \
+ cat zImage $${dtbpath} > zImage.$${dtb} || exit 1; \
+ done)
endef
ifeq ($(BR2_LINUX_KERNEL_APPENDED_UIMAGE),y)
# We need to generate a new u-boot image that takes into
@@ -284,11 +288,14 @@ ifeq ($(BR2_LINUX_KERNEL_APPENDED_UIMAGE),y)
# of the image. To do so, we first need to retrieve both load
# address and entry point for the kernel from the already
# generate uboot image before using mkimage -l.
-LINUX_APPEND_DTB += $(sep) MKIMAGE_ARGS=`$(MKIMAGE) -l $(LINUX_IMAGE_PATH) |\
+LINUX_APPEND_DTB += ; \
+ MKIMAGE_ARGS=`$(MKIMAGE) -l $(LINUX_IMAGE_PATH) |\
sed -n -e 's/Image Name:[ ]*\(.*\)/-n \1/p' -e 's/Load Address:/-a/p' -e 's/Entry Point:/-e/p'`; \
- $(MKIMAGE) -A $(MKIMAGE_ARCH) -O linux \
- -T kernel -C none $${MKIMAGE_ARGS} \
- -d $(KERNEL_ARCH_PATH)/boot/zImage $(LINUX_IMAGE_PATH);
+ for dtb in $(KERNEL_DTS_NAME); do \
+ $(MKIMAGE) -A $(MKIMAGE_ARCH) -O linux \
+ -T kernel -C none $${MKIMAGE_ARGS} \
+ -d $(KERNEL_ARCH_PATH)/boot/zImage.$${dtb} $(LINUX_IMAGE_PATH).$${dtb}; \
+ done
endif
endif
@@ -305,9 +312,20 @@ define LINUX_BUILD_CMDS
$(LINUX_APPEND_DTB)
endef
+ifeq ($(BR2_LINUX_KERNEL_APPENDED_DTB),y)
+# When a DTB was appended, install the potential several images with
+# appended DTBs.
+define LINUX_INSTALL_IMAGE
+ mkdir -p $(1)
+ cp $(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME).* $(1)
+endef
+else
+# Otherwise, just install the unique image generated by the kernel
+# build process.
define LINUX_INSTALL_IMAGE
$(INSTALL) -m 0644 -D $(LINUX_IMAGE_PATH) $(1)/$(LINUX_IMAGE_NAME)
endef
+endif
ifeq ($(BR2_LINUX_KERNEL_INSTALL_TARGET),y)
define LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET
@@ -316,7 +334,6 @@ define LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET
endef
endif
-
define LINUX_INSTALL_HOST_TOOLS
# Installing dtc (device tree compiler) as host tool, if selected
if grep -q "CONFIG_DTC=y" $(@D)/.config; then \
@@ -403,13 +420,6 @@ $(error No kernel device tree source specified, check your \
BR2_LINUX_KERNEL_USE_INTREE_DTS / BR2_LINUX_KERNEL_USE_CUSTOM_DTS settings)
endif
-ifeq ($(BR2_LINUX_KERNEL_APPENDED_DTB),y)
-ifneq ($(words $(KERNEL_DTS_NAME)),1)
-$(error Kernel with appended device tree needs exactly one DTS source. \
- Check BR2_LINUX_KERNEL_INTREE_DTS_NAME or BR2_LINUX_KERNEL_CUSTOM_DTS_PATH.)
-endif
-endif
-
endif # BR_BUILDING
$(eval $(kconfig-package))
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2015-12-20 14:23 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-12-20 14:23 [Buildroot] [git commit] linux: don't build appended DTB image in place and support multiple images Thomas Petazzoni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.