* [patch] hwmon: (emc2103) Fix typo in MODULE_PARM_DESC
@ 2016-01-08 11:03 ` Dan Carpenter
0 siblings, 0 replies; 6+ messages in thread
From: Dan Carpenter @ 2016-01-08 11:03 UTC (permalink / raw)
To: Steve Glendinning
Cc: Jean Delvare, Guenter Roeck, lm-sensors, linux-kernel, kernel-janitors
"apd" was intended here instead of "init".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
index 952fe69..24e395c 100644
--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -58,7 +58,7 @@ static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 };
*/
static int apd = -1;
module_param(apd, bint, 0);
-MODULE_PARM_DESC(init, "Set to zero to disable anti-parallel diode mode");
+MODULE_PARM_DESC(apd, "Set to zero to disable anti-parallel diode mode");
struct temperature {
s8 degrees;
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [patch] hwmon: (emc2103) Fix typo in MODULE_PARM_DESC
@ 2016-01-08 11:03 ` Dan Carpenter
0 siblings, 0 replies; 6+ messages in thread
From: Dan Carpenter @ 2016-01-08 11:03 UTC (permalink / raw)
To: Steve Glendinning
Cc: Jean Delvare, Guenter Roeck, lm-sensors, linux-kernel, kernel-janitors
"apd" was intended here instead of "init".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
index 952fe69..24e395c 100644
--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -58,7 +58,7 @@ static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 };
*/
static int apd = -1;
module_param(apd, bint, 0);
-MODULE_PARM_DESC(init, "Set to zero to disable anti-parallel diode mode");
+MODULE_PARM_DESC(apd, "Set to zero to disable anti-parallel diode mode");
struct temperature {
s8 degrees;
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [lm-sensors] [patch] hwmon: (emc2103) Fix typo in MODULE_PARM_DESC
@ 2016-01-08 11:03 ` Dan Carpenter
0 siblings, 0 replies; 6+ messages in thread
From: Dan Carpenter @ 2016-01-08 11:03 UTC (permalink / raw)
To: Steve Glendinning
Cc: Jean Delvare, Guenter Roeck, lm-sensors, linux-kernel, kernel-janitors
"apd" was intended here instead of "init".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
index 952fe69..24e395c 100644
--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -58,7 +58,7 @@ static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 };
*/
static int apd = -1;
module_param(apd, bint, 0);
-MODULE_PARM_DESC(init, "Set to zero to disable anti-parallel diode mode");
+MODULE_PARM_DESC(apd, "Set to zero to disable anti-parallel diode mode");
struct temperature {
s8 degrees;
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [lm-sensors] [patch] hwmon: (emc2103) Fix typo in MODULE_PARM_DESC
2016-01-08 11:03 ` Dan Carpenter
(?)
@ 2016-01-08 12:34 ` Jean Delvare
-1 siblings, 0 replies; 6+ messages in thread
From: Jean Delvare @ 2016-01-08 12:34 UTC (permalink / raw)
To: Dan Carpenter
Cc: Steve Glendinning, kernel-janitors, linux-kernel, lm-sensors
Hi Dan,
On Fri, 8 Jan 2016 14:03:21 +0300, Dan Carpenter wrote:
> "apd" was intended here instead of "init".
>
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
>
> diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
> index 952fe69..24e395c 100644
> --- a/drivers/hwmon/emc2103.c
> +++ b/drivers/hwmon/emc2103.c
> @@ -58,7 +58,7 @@ static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 };
> */
> static int apd = -1;
> module_param(apd, bint, 0);
> -MODULE_PARM_DESC(init, "Set to zero to disable anti-parallel diode mode");
> +MODULE_PARM_DESC(apd, "Set to zero to disable anti-parallel diode mode");
>
> struct temperature {
> s8 degrees;
Applied, thanks.
--
Jean Delvare
SUSE L3 Support
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [lm-sensors] [patch] hwmon: (emc2103) Fix typo in MODULE_PARM_DESC
@ 2016-01-08 12:34 ` Jean Delvare
0 siblings, 0 replies; 6+ messages in thread
From: Jean Delvare @ 2016-01-08 12:34 UTC (permalink / raw)
To: Dan Carpenter
Cc: Steve Glendinning, kernel-janitors, linux-kernel, lm-sensors
Hi Dan,
On Fri, 8 Jan 2016 14:03:21 +0300, Dan Carpenter wrote:
> "apd" was intended here instead of "init".
>
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
>
> diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
> index 952fe69..24e395c 100644
> --- a/drivers/hwmon/emc2103.c
> +++ b/drivers/hwmon/emc2103.c
> @@ -58,7 +58,7 @@ static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 };
> */
> static int apd = -1;
> module_param(apd, bint, 0);
> -MODULE_PARM_DESC(init, "Set to zero to disable anti-parallel diode mode");
> +MODULE_PARM_DESC(apd, "Set to zero to disable anti-parallel diode mode");
>
> struct temperature {
> s8 degrees;
Applied, thanks.
--
Jean Delvare
SUSE L3 Support
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [lm-sensors] [patch] hwmon: (emc2103) Fix typo in MODULE_PARM_DESC
@ 2016-01-08 12:34 ` Jean Delvare
0 siblings, 0 replies; 6+ messages in thread
From: Jean Delvare @ 2016-01-08 12:34 UTC (permalink / raw)
To: Dan Carpenter
Cc: Steve Glendinning, kernel-janitors, linux-kernel, lm-sensors
Hi Dan,
On Fri, 8 Jan 2016 14:03:21 +0300, Dan Carpenter wrote:
> "apd" was intended here instead of "init".
>
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
>
> diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
> index 952fe69..24e395c 100644
> --- a/drivers/hwmon/emc2103.c
> +++ b/drivers/hwmon/emc2103.c
> @@ -58,7 +58,7 @@ static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 };
> */
> static int apd = -1;
> module_param(apd, bint, 0);
> -MODULE_PARM_DESC(init, "Set to zero to disable anti-parallel diode mode");
> +MODULE_PARM_DESC(apd, "Set to zero to disable anti-parallel diode mode");
>
> struct temperature {
> s8 degrees;
Applied, thanks.
--
Jean Delvare
SUSE L3 Support
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-01-08 12:34 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-01-08 11:03 [patch] hwmon: (emc2103) Fix typo in MODULE_PARM_DESC Dan Carpenter
2016-01-08 11:03 ` [lm-sensors] " Dan Carpenter
2016-01-08 11:03 ` Dan Carpenter
2016-01-08 12:34 ` [lm-sensors] " Jean Delvare
2016-01-08 12:34 ` Jean Delvare
2016-01-08 12:34 ` Jean Delvare
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.