* linux v4.4.0 nouveau fails @ 2016-01-12 0:23 Wakko Warner [not found] ` <20160112002341.GA30730-WZdgCHJQUilg9hUCZPvPmw@public.gmane.org> 0 siblings, 1 reply; 7+ messages in thread From: Wakko Warner @ 2016-01-12 0:23 UTC (permalink / raw) To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW Please keep me in the CC. I am not subscribed to this list. When booting 4.4.0 on one of my systems, when nouveau loads, the screen goes into powersave. It doesn't appear to register the fb0 device. When X starts up, the screen comes back and I'm able to login. When launching anything that accesses 3D, the screen freezes. Nothing is logged in either X or dmesg. This same system works with 4.2.6. I understand that the version in 4.3 was a rewrite. System: Gigabyte EP45-DS3R, NVIDIA Quadro FX 3500 (10de:029d subsys 10de:032b) This system boots over the network with the onboard RTL nic. NOTE: Syslinux 4.04 fails to boot this kernel, but will boot 4.2.x just fine. System was booted with grub built for pxe boot. According to X log, the chipset is NV49. Xorg log available on request. dmesg relevent to nouveau [ 8.051990] nouveau 0000:01:00.0: NVIDIA G71 (049d00a2) [ 8.248756] nouveau 0000:01:00.0: bios: version 05.71.22.29.06 [ 8.249189] nouveau 0000:01:00.0: fb: 256 MiB GDDR3 [ 8.304586] [TTM] Zone kernel: Available graphics memory: 4085044 kiB [ 8.304627] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 8.304664] [TTM] Initializing pool allocator [ 8.304704] [TTM] Initializing DMA pool allocator [ 8.304753] nouveau 0000:01:00.0: DRM: VRAM: 250 MiB [ 8.304789] nouveau 0000:01:00.0: DRM: GART: 512 MiB [ 8.304828] nouveau 0000:01:00.0: DRM: TMDS table version 1.1 [ 8.304865] nouveau 0000:01:00.0: DRM: TMDS table script pointers not stubbed [ 8.304903] nouveau 0000:01:00.0: DRM: DCB version 3.0 [ 8.304940] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028 [ 8.304979] nouveau 0000:01:00.0: DRM: DCB outp 01: 03000302 00000000 [ 8.305016] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028 [ 8.305054] nouveau 0000:01:00.0: DRM: DCB outp 03: 0c011312 00000000 [ 8.305092] nouveau 0000:01:00.0: DRM: DCB conn 00: 1030 [ 8.305129] nouveau 0000:01:00.0: DRM: DCB conn 01: 2130 [ 8.305165] nouveau 0000:01:00.0: DRM: DCB conn 02: 0260 [ 8.305337] nouveau 0000:01:00.0: DRM: Saving VGA fonts [ 8.343959] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.343996] [drm] Driver supports precise vblank timestamp query. [ 8.344053] nouveau 0000:01:00.0: DRM: 0xBDF8: Parsing digital output script table [ 8.393709] nouveau 0000:01:00.0: DRM: 0xBE3A: Parsing digital output script table [ 8.444646] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies [ 8.444689] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 <after X starts> [ 1011.109534] nouveau 0000:01:00.0: DRM: 0xBDF8: Parsing digital output script table -- Microsoft has beaten Volkswagen's world record. Volkswagen only created 22 million bugs. _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <20160112002341.GA30730-WZdgCHJQUilg9hUCZPvPmw@public.gmane.org>]
* Re: linux v4.4.0 nouveau fails [not found] ` <20160112002341.GA30730-WZdgCHJQUilg9hUCZPvPmw@public.gmane.org> @ 2016-01-15 19:05 ` Ilia Mirkin 2016-01-15 22:04 ` Wakko Warner 0 siblings, 1 reply; 7+ messages in thread From: Ilia Mirkin @ 2016-01-15 19:05 UTC (permalink / raw) To: Wakko Warner; +Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW I suspect the fb0 issue is because you disabled CONFIG_DRM_FBDEV_EMULATION? Does the freeze also happen with 4.3? Any chance you could bisect? On Mon, Jan 11, 2016 at 7:23 PM, Wakko Warner <wakko@animx.eu.org> wrote: > Please keep me in the CC. I am not subscribed to this list. > > When booting 4.4.0 on one of my systems, when nouveau loads, the screen goes > into powersave. It doesn't appear to register the fb0 device. > When X starts up, the screen comes back and I'm able to login. When > launching anything that accesses 3D, the screen freezes. Nothing is logged > in either X or dmesg. > > This same system works with 4.2.6. I understand that the version in 4.3 was > a rewrite. > > System: Gigabyte EP45-DS3R, NVIDIA Quadro FX 3500 (10de:029d subsys > 10de:032b) > This system boots over the network with the onboard RTL nic. > NOTE: Syslinux 4.04 fails to boot this kernel, but will boot 4.2.x just > fine. System was booted with grub built for pxe boot. > According to X log, the chipset is NV49. Xorg log available on request. > > dmesg relevent to nouveau > [ 8.051990] nouveau 0000:01:00.0: NVIDIA G71 (049d00a2) > [ 8.248756] nouveau 0000:01:00.0: bios: version 05.71.22.29.06 > [ 8.249189] nouveau 0000:01:00.0: fb: 256 MiB GDDR3 > [ 8.304586] [TTM] Zone kernel: Available graphics memory: 4085044 kiB > [ 8.304627] [TTM] Zone dma32: Available graphics memory: 2097152 kiB > [ 8.304664] [TTM] Initializing pool allocator > [ 8.304704] [TTM] Initializing DMA pool allocator > [ 8.304753] nouveau 0000:01:00.0: DRM: VRAM: 250 MiB > [ 8.304789] nouveau 0000:01:00.0: DRM: GART: 512 MiB > [ 8.304828] nouveau 0000:01:00.0: DRM: TMDS table version 1.1 > [ 8.304865] nouveau 0000:01:00.0: DRM: TMDS table script pointers not stubbed > [ 8.304903] nouveau 0000:01:00.0: DRM: DCB version 3.0 > [ 8.304940] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028 > [ 8.304979] nouveau 0000:01:00.0: DRM: DCB outp 01: 03000302 00000000 > [ 8.305016] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028 > [ 8.305054] nouveau 0000:01:00.0: DRM: DCB outp 03: 0c011312 00000000 > [ 8.305092] nouveau 0000:01:00.0: DRM: DCB conn 00: 1030 > [ 8.305129] nouveau 0000:01:00.0: DRM: DCB conn 01: 2130 > [ 8.305165] nouveau 0000:01:00.0: DRM: DCB conn 02: 0260 > [ 8.305337] nouveau 0000:01:00.0: DRM: Saving VGA fonts > [ 8.343959] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 8.343996] [drm] Driver supports precise vblank timestamp query. > [ 8.344053] nouveau 0000:01:00.0: DRM: 0xBDF8: Parsing digital output script table > [ 8.393709] nouveau 0000:01:00.0: DRM: 0xBE3A: Parsing digital output script table > [ 8.444646] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies > [ 8.444689] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 > <after X starts> > [ 1011.109534] nouveau 0000:01:00.0: DRM: 0xBDF8: Parsing digital output script table > > > -- > Microsoft has beaten Volkswagen's world record. Volkswagen only created 22 > million bugs. > _______________________________________________ > Nouveau mailing list > Nouveau@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/nouveau _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: linux v4.4.0 nouveau fails 2016-01-15 19:05 ` Ilia Mirkin @ 2016-01-15 22:04 ` Wakko Warner [not found] ` <20160115220417.GA10587-WZdgCHJQUilg9hUCZPvPmw@public.gmane.org> 0 siblings, 1 reply; 7+ messages in thread From: Wakko Warner @ 2016-01-15 22:04 UTC (permalink / raw) To: Ilia Mirkin; +Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW Ilia Mirkin wrote: > I suspect the fb0 issue is because you disabled > CONFIG_DRM_FBDEV_EMULATION? Does the freeze also happen with 4.3? Any > chance you could bisect? I saw this config option, but I didn't realize that. The issue also occurs with 4.3. I even tried 4.3-rc1 with the same results. Would the DRM_FBDEV_EMULATION effect 3D? > On Mon, Jan 11, 2016 at 7:23 PM, Wakko Warner <wakko@animx.eu.org> wrote: > > Please keep me in the CC. I am not subscribed to this list. > > > > When booting 4.4.0 on one of my systems, when nouveau loads, the screen goes > > into powersave. It doesn't appear to register the fb0 device. > > When X starts up, the screen comes back and I'm able to login. When > > launching anything that accesses 3D, the screen freezes. Nothing is logged > > in either X or dmesg. > > > > This same system works with 4.2.6. I understand that the version in 4.3 was > > a rewrite. > > > > System: Gigabyte EP45-DS3R, NVIDIA Quadro FX 3500 (10de:029d subsys > > 10de:032b) > > This system boots over the network with the onboard RTL nic. > > NOTE: Syslinux 4.04 fails to boot this kernel, but will boot 4.2.x just > > fine. System was booted with grub built for pxe boot. > > According to X log, the chipset is NV49. Xorg log available on request. > > > > dmesg relevent to nouveau > > [ 8.051990] nouveau 0000:01:00.0: NVIDIA G71 (049d00a2) > > [ 8.248756] nouveau 0000:01:00.0: bios: version 05.71.22.29.06 > > [ 8.249189] nouveau 0000:01:00.0: fb: 256 MiB GDDR3 > > [ 8.304586] [TTM] Zone kernel: Available graphics memory: 4085044 kiB > > [ 8.304627] [TTM] Zone dma32: Available graphics memory: 2097152 kiB > > [ 8.304664] [TTM] Initializing pool allocator > > [ 8.304704] [TTM] Initializing DMA pool allocator > > [ 8.304753] nouveau 0000:01:00.0: DRM: VRAM: 250 MiB > > [ 8.304789] nouveau 0000:01:00.0: DRM: GART: 512 MiB > > [ 8.304828] nouveau 0000:01:00.0: DRM: TMDS table version 1.1 > > [ 8.304865] nouveau 0000:01:00.0: DRM: TMDS table script pointers not stubbed > > [ 8.304903] nouveau 0000:01:00.0: DRM: DCB version 3.0 > > [ 8.304940] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028 > > [ 8.304979] nouveau 0000:01:00.0: DRM: DCB outp 01: 03000302 00000000 > > [ 8.305016] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028 > > [ 8.305054] nouveau 0000:01:00.0: DRM: DCB outp 03: 0c011312 00000000 > > [ 8.305092] nouveau 0000:01:00.0: DRM: DCB conn 00: 1030 > > [ 8.305129] nouveau 0000:01:00.0: DRM: DCB conn 01: 2130 > > [ 8.305165] nouveau 0000:01:00.0: DRM: DCB conn 02: 0260 > > [ 8.305337] nouveau 0000:01:00.0: DRM: Saving VGA fonts > > [ 8.343959] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > > [ 8.343996] [drm] Driver supports precise vblank timestamp query. > > [ 8.344053] nouveau 0000:01:00.0: DRM: 0xBDF8: Parsing digital output script table > > [ 8.393709] nouveau 0000:01:00.0: DRM: 0xBE3A: Parsing digital output script table > > [ 8.444646] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies > > [ 8.444689] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 > > <after X starts> > > [ 1011.109534] nouveau 0000:01:00.0: DRM: 0xBDF8: Parsing digital output script table > > > > > > -- > > Microsoft has beaten Volkswagen's world record. Volkswagen only created 22 > > million bugs. > > _______________________________________________ > > Nouveau mailing list > > Nouveau@lists.freedesktop.org > > http://lists.freedesktop.org/mailman/listinfo/nouveau -- Microsoft has beaten Volkswagen's world record. Volkswagen only created 22 million bugs. _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <20160115220417.GA10587-WZdgCHJQUilg9hUCZPvPmw@public.gmane.org>]
* Re: linux v4.4.0 nouveau fails [not found] ` <20160115220417.GA10587-WZdgCHJQUilg9hUCZPvPmw@public.gmane.org> @ 2016-01-15 22:10 ` Ilia Mirkin [not found] ` <CAKb7UvhCXXtB9JTYCZxYYbbdEEFFc09hXnVT=YFah0EH92vErA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 7+ messages in thread From: Ilia Mirkin @ 2016-01-15 22:10 UTC (permalink / raw) To: Wakko Warner; +Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW On Fri, Jan 15, 2016 at 5:04 PM, Wakko Warner <wakko@animx.eu.org> wrote: > Ilia Mirkin wrote: >> I suspect the fb0 issue is because you disabled >> CONFIG_DRM_FBDEV_EMULATION? Does the freeze also happen with 4.3? Any >> chance you could bisect? > > I saw this config option, but I didn't realize that. > The issue also occurs with 4.3. I even tried 4.3-rc1 with the same results. > > Would the DRM_FBDEV_EMULATION effect 3D? Shouldn't, but... who knows. The rewrite in 4.3 was done in a bisectable way, so it should be possible to figure out where we went wrong. Not a ton of testing is done on pre-G80 gpu's nowadays, so these issues sometimes sneak in. -ilia _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <CAKb7UvhCXXtB9JTYCZxYYbbdEEFFc09hXnVT=YFah0EH92vErA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: linux v4.4.0 nouveau fails [not found] ` <CAKb7UvhCXXtB9JTYCZxYYbbdEEFFc09hXnVT=YFah0EH92vErA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2016-01-15 23:49 ` Wakko Warner 2016-01-17 1:07 ` Wakko Warner 1 sibling, 0 replies; 7+ messages in thread From: Wakko Warner @ 2016-01-15 23:49 UTC (permalink / raw) To: Ilia Mirkin; +Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW Ilia Mirkin wrote: > On Fri, Jan 15, 2016 at 5:04 PM, Wakko Warner <wakko@animx.eu.org> wrote: > > Ilia Mirkin wrote: > >> I suspect the fb0 issue is because you disabled > >> CONFIG_DRM_FBDEV_EMULATION? Does the freeze also happen with 4.3? Any > >> chance you could bisect? > > > > I saw this config option, but I didn't realize that. > > The issue also occurs with 4.3. I even tried 4.3-rc1 with the same results. > > > > Would the DRM_FBDEV_EMULATION effect 3D? > > Shouldn't, but... who knows. The rewrite in 4.3 was done in a I'll try it with this enabled. > bisectable way, so it should be possible to figure out where we went > wrong. Not a ton of testing is done on pre-G80 gpu's nowadays, so > these issues sometimes sneak in. I've never done a bisect so I'll need a little help. I have 1 other nvidia card that I might beable to test. I'm not sure, but it's probably a pre-g80 as well. It was given to me by someone who got it with a mac. Everytime the 3d locks, I have to either reboot the system or shut it completely down for the graphics to work again. -- Microsoft has beaten Volkswagen's world record. Volkswagen only created 22 million bugs. _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: linux v4.4.0 nouveau fails [not found] ` <CAKb7UvhCXXtB9JTYCZxYYbbdEEFFc09hXnVT=YFah0EH92vErA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2016-01-15 23:49 ` Wakko Warner @ 2016-01-17 1:07 ` Wakko Warner 1 sibling, 0 replies; 7+ messages in thread From: Wakko Warner @ 2016-01-17 1:07 UTC (permalink / raw) To: Ilia Mirkin; +Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW Please keep me in CC as I am not on the list. Ilia Mirkin wrote: > On Fri, Jan 15, 2016 at 5:04 PM, Wakko Warner <wakko@animx.eu.org> wrote: > > Ilia Mirkin wrote: > >> I suspect the fb0 issue is because you disabled > >> CONFIG_DRM_FBDEV_EMULATION? Does the freeze also happen with 4.3? Any > >> chance you could bisect? > > > > I saw this config option, but I didn't realize that. > > The issue also occurs with 4.3. I even tried 4.3-rc1 with the same results. > > > > Would the DRM_FBDEV_EMULATION effect 3D? > > Shouldn't, but... who knows. The rewrite in 4.3 was done in a > bisectable way, so it should be possible to figure out where we went > wrong. Not a ton of testing is done on pre-G80 gpu's nowadays, so > these issues sometimes sneak in. I enabled the DRM_FBDEV_EMULATION and 3D is working for 4.4.0. I only tried with gears from xscreensaver. I'm going to try with something else as well. As a curiosity, why was DRM_FBDEV_EMULATION added in 4.3? -- Microsoft has beaten Volkswagen's world record. Volkswagen only created 22 million bugs. _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau ^ permalink raw reply [flat|nested] 7+ messages in thread
* linux v4.4.0 nouveau fails @ 2016-01-11 2:35 Wakko Warner 0 siblings, 0 replies; 7+ messages in thread From: Wakko Warner @ 2016-01-11 2:35 UTC (permalink / raw) To: linux-kernel When booting 4.4.0 on one of my systems, when nouveau loads, the screen goes into powersave. It doesn't appear to register the fb0 device. When X starts up, the screen comes back and I'm able to login. When launching anything that accesses 3D, the screen freezes. Nothing is logged in either X or dmesg. This same system works with 4.2.6. I understand that the version in 4.3 was a rewrite. System: Gigabyte EP45-DS3R, NVIDIA Quadro FX 3500 (10de:029d subsys 10de:032b) This system boots over the network with the onboard RTL nic. NOTE: Syslinux 4.04 fails to boot this kernel, but will boot 4.2.x just fine. System was booted with grub built for pxe boot. According to X log, the chipset is NV49. Xorg log available on request. dmesg relevent to nouveau [ 8.051990] nouveau 0000:01:00.0: NVIDIA G71 (049d00a2) [ 8.248756] nouveau 0000:01:00.0: bios: version 05.71.22.29.06 [ 8.249189] nouveau 0000:01:00.0: fb: 256 MiB GDDR3 [ 8.304586] [TTM] Zone kernel: Available graphics memory: 4085044 kiB [ 8.304627] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 8.304664] [TTM] Initializing pool allocator [ 8.304704] [TTM] Initializing DMA pool allocator [ 8.304753] nouveau 0000:01:00.0: DRM: VRAM: 250 MiB [ 8.304789] nouveau 0000:01:00.0: DRM: GART: 512 MiB [ 8.304828] nouveau 0000:01:00.0: DRM: TMDS table version 1.1 [ 8.304865] nouveau 0000:01:00.0: DRM: TMDS table script pointers not stubbed [ 8.304903] nouveau 0000:01:00.0: DRM: DCB version 3.0 [ 8.304940] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028 [ 8.304979] nouveau 0000:01:00.0: DRM: DCB outp 01: 03000302 00000000 [ 8.305016] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028 [ 8.305054] nouveau 0000:01:00.0: DRM: DCB outp 03: 0c011312 00000000 [ 8.305092] nouveau 0000:01:00.0: DRM: DCB conn 00: 1030 [ 8.305129] nouveau 0000:01:00.0: DRM: DCB conn 01: 2130 [ 8.305165] nouveau 0000:01:00.0: DRM: DCB conn 02: 0260 [ 8.305337] nouveau 0000:01:00.0: DRM: Saving VGA fonts [ 8.343959] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.343996] [drm] Driver supports precise vblank timestamp query. [ 8.344053] nouveau 0000:01:00.0: DRM: 0xBDF8: Parsing digital output script table [ 8.393709] nouveau 0000:01:00.0: DRM: 0xBE3A: Parsing digital output script table [ 8.444646] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies [ 8.444689] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 <after X starts> [ 1011.109534] nouveau 0000:01:00.0: DRM: 0xBDF8: Parsing digital output script table -- Microsoft has beaten Volkswagen's world record. Volkswagen only created 22 million bugs. ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-01-17 1:07 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-01-12 0:23 linux v4.4.0 nouveau fails Wakko Warner [not found] ` <20160112002341.GA30730-WZdgCHJQUilg9hUCZPvPmw@public.gmane.org> 2016-01-15 19:05 ` Ilia Mirkin 2016-01-15 22:04 ` Wakko Warner [not found] ` <20160115220417.GA10587-WZdgCHJQUilg9hUCZPvPmw@public.gmane.org> 2016-01-15 22:10 ` Ilia Mirkin [not found] ` <CAKb7UvhCXXtB9JTYCZxYYbbdEEFFc09hXnVT=YFah0EH92vErA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2016-01-15 23:49 ` Wakko Warner 2016-01-17 1:07 ` Wakko Warner -- strict thread matches above, loose matches on Subject: below -- 2016-01-11 2:35 Wakko Warner
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.