* Can't boot new 4.4 kernel with IOMMU enabled
@ 2016-01-12 21:37 Mark Hounschell
[not found] ` <56957209.1080202-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-01-12 21:37 UTC (permalink / raw)
To: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
[-- Attachment #1: Type: text/plain, Size: 702 bytes --]
Mother board is Gigabyte GA-990FXA-UD5. A 4.3.5 kernel works fine.
Attached is my dmesg after failing to boot and going to rescue mode.
amd_iommu_dump was set on the cmdline. kernel is x86_64
My kernel config as relates to the IOMMU:
grep -i iommu .config
# CONFIG_GART_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not set
CONFIG_IOMMU_HELPER=y
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
# Generic IOMMU Pagetable Support
CONFIG_IOMMU_IOVA=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_STATS is not set
CONFIG_AMD_IOMMU_V2=m
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
# CONFIG_IOMMU_STRESS is not set
Regards
Mark
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 238292 bytes --]
[ 0.253740] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff]
[ 0.253747] pci 0000:00:15.0: bridge window [mem 0xc7000000-0xc70fffff 64bit pref]
[ 0.253754] pci 0000:00:15.1: PCI bridge to [bus 12]
[ 0.253759] pci 0000:00:15.1: bridge window [mem 0xdde00000-0xddefffff]
[ 0.253767] pci 0000:00:15.2: PCI bridge to [bus 13]
[ 0.253770] pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
[ 0.253776] pci 0000:00:15.2: bridge window [mem 0xddd00000-0xdddfffff]
[ 0.253784] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.253785] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.253787] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.253788] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.253789] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.253791] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.253792] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xdfffffff window]
[ 0.253794] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.253795] pci_bus 0000:01: resource 1 [mem 0xd9000000-0xdb0fffff]
[ 0.253797] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.253798] pci_bus 0000:02: resource 0 [io 0x6000-0x7fff]
[ 0.253799] pci_bus 0000:02: resource 1 [mem 0xdb800000-0xdd9fffff]
[ 0.253801] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.253802] pci_bus 0000:03: resource 0 [io 0x6000-0x7fff]
[ 0.253804] pci_bus 0000:03: resource 1 [mem 0xdb800000-0xdd9fffff]
[ 0.253805] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.253806] pci_bus 0000:04: resource 0 [io 0x6000-0x7fff]
[ 0.253808] pci_bus 0000:04: resource 1 [mem 0xdb800000-0xdd9fffff]
[ 0.253809] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.253811] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
[ 0.253812] pci_bus 0000:05: resource 1 [mem 0xdd800000-0xdd8fffff]
[ 0.253813] pci_bus 0000:06: resource 1 [mem 0xde100000-0xde1fffff]
[ 0.253815] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
[ 0.253816] pci_bus 0000:07: resource 1 [mem 0xde000000-0xde0fffff]
[ 0.253817] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.253819] pci_bus 0000:08: resource 1 [mem 0xd0000000-0xd87fffff]
[ 0.253820] pci_bus 0000:08: resource 2 [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.253822] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
[ 0.253823] pci_bus 0000:09: resource 1 [mem 0xd0000000-0xd87fffff]
[ 0.253824] pci_bus 0000:09: resource 2 [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.253826] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff]
[ 0.253827] pci_bus 0000:0a: resource 1 [mem 0xd0000000-0xd87fffff]
[ 0.253828] pci_bus 0000:0a: resource 2 [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.253830] pci_bus 0000:0b: resource 1 [mem 0xd8600000-0xd86fffff]
[ 0.253831] pci_bus 0000:0b: resource 2 [mem 0xc6000000-0xc6ffffff 64bit pref]
[ 0.253833] pci_bus 0000:0c: resource 1 [mem 0xd8500000-0xd85fffff]
[ 0.253834] pci_bus 0000:0c: resource 2 [mem 0xc5000000-0xc5ffffff 64bit pref]
[ 0.253835] pci_bus 0000:0d: resource 1 [mem 0xd8400000-0xd84fffff]
[ 0.253837] pci_bus 0000:0d: resource 2 [mem 0xc4000000-0xc4ffffff 64bit pref]
[ 0.253838] pci_bus 0000:0e: resource 0 [io 0xb000-0xbfff]
[ 0.253839] pci_bus 0000:0e: resource 1 [mem 0xddb00000-0xddcfffff]
[ 0.253841] pci_bus 0000:0f: resource 0 [io 0xb000-0xbfff]
[ 0.253842] pci_bus 0000:0f: resource 1 [mem 0xddb00000-0xddbfffff]
[ 0.253844] pci_bus 0000:10: resource 0 [io 0xa000-0xafff]
[ 0.253845] pci_bus 0000:10: resource 1 [mem 0xddf00000-0xddffffff]
[ 0.253846] pci_bus 0000:10: resource 4 [io 0x0000-0x03af window]
[ 0.253848] pci_bus 0000:10: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.253849] pci_bus 0000:10: resource 6 [io 0x03b0-0x03df window]
[ 0.253851] pci_bus 0000:10: resource 7 [io 0x0d00-0xffff window]
[ 0.253852] pci_bus 0000:10: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.253853] pci_bus 0000:10: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.253855] pci_bus 0000:10: resource 10 [mem 0xb0000000-0xdfffffff window]
[ 0.253856] pci_bus 0000:11: resource 0 [io 0x9000-0x9fff]
[ 0.253858] pci_bus 0000:11: resource 2 [mem 0xc7000000-0xc70fffff 64bit pref]
[ 0.253859] pci_bus 0000:12: resource 1 [mem 0xdde00000-0xddefffff]
[ 0.253860] pci_bus 0000:13: resource 0 [io 0x8000-0x8fff]
[ 0.253862] pci_bus 0000:13: resource 1 [mem 0xddd00000-0xdddfffff]
[ 0.253882] NET: Registered protocol family 2
[ 0.254034] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.254257] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.254439] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.254469] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.254524] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.254615] NET: Registered protocol family 1
[ 0.551029] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.551032] pci 0000:02:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
[ 0.551087] pci 0000:08:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
[ 0.551161] PCI: CLS 64 bytes, default 64
[ 0.551207] Unpacking initramfs...
[ 1.216655] microcode: microcode: updated early to new patch_level=0x0600063d
[ 1.218310] Freeing initrd memory: 7840K (ffff8800370a0000 - ffff880037848000)
[ 1.218389] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: 3e info 1300
[ 1.218392] AMD-Vi: mmio-addr: 00000000feb20000
[ 1.218414] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:00.0 flags: 00
[ 1.218418] AMD-Vi: DEV_RANGE_END devid: 00:00.2
[ 1.218421] AMD-Vi: DEV_SELECT devid: 00:02.0 flags: 00
[ 1.218424] AMD-Vi: DEV_SELECT devid: 01:00.0 flags: 00
[ 1.218426] AMD-Vi: DEV_SELECT devid: 00:04.0 flags: 00
[ 1.218429] AMD-Vi: DEV_SELECT devid: 02:00.0 flags: 00
[ 1.218432] AMD-Vi: DEV_ALIAS_RANGE devid: 03:01.0 flags: 00 devid_to: 03:00.0
[ 1.218437] AMD-Vi: DEV_RANGE_END devid: 05:1f.7
[ 1.218451] AMD-Vi: DEV_SELECT devid: 00:09.0 flags: 00
[ 1.218454] AMD-Vi: DEV_SELECT devid: 06:00.0 flags: 00
[ 1.218457] AMD-Vi: DEV_SELECT devid: 00:0a.0 flags: 00
[ 1.218460] AMD-Vi: DEV_SELECT devid: 07:00.0 flags: 00
[ 1.218463] AMD-Vi: DEV_SELECT devid: 00:0b.0 flags: 00
[ 1.218465] AMD-Vi: DEV_SELECT devid: 08:00.0 flags: 00
[ 1.218468] AMD-Vi: DEV_ALIAS_RANGE devid: 09:01.0 flags: 00 devid_to: 09:00.0
[ 1.218473] AMD-Vi: DEV_RANGE_END devid: 0d:1f.7
[ 1.218496] AMD-Vi: DEV_SELECT devid: 00:0d.0 flags: 00
[ 1.218498] AMD-Vi: DEV_SELECT devid: 0e:00.0 flags: 00
[ 1.218501] AMD-Vi: DEV_ALIAS_RANGE devid: 0f:01.0 flags: 00 devid_to: 0f:00.0
[ 1.218506] AMD-Vi: DEV_RANGE_END devid: 0f:1f.7
[ 1.218512] AMD-Vi: DEV_SELECT devid: 00:11.0 flags: 00
[ 1.218515] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:12.0 flags: 00
[ 1.218518] AMD-Vi: DEV_RANGE_END devid: 00:12.2
[ 1.218521] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:13.0 flags: 00
[ 1.218524] AMD-Vi: DEV_RANGE_END devid: 00:13.2
[ 1.218526] AMD-Vi: DEV_SELECT devid: 00:14.0 flags: d7
[ 1.218529] AMD-Vi: DEV_SELECT devid: 00:14.1 flags: 00
[ 1.218532] AMD-Vi: DEV_SELECT devid: 00:14.2 flags: 00
[ 1.218535] AMD-Vi: DEV_SELECT devid: 00:14.3 flags: 00
[ 1.218538] AMD-Vi: DEV_SELECT devid: 00:14.4 flags: 00
[ 1.218541] AMD-Vi: DEV_ALIAS_RANGE devid: 10:00.0 flags: 00 devid_to: 00:14.4
[ 1.218545] AMD-Vi: DEV_RANGE_END devid: 10:1f.7
[ 1.218552] AMD-Vi: DEV_SELECT devid: 00:14.5 flags: 00
[ 1.218555] AMD-Vi: DEV_SELECT devid: 00:15.0 flags: 00
[ 1.218557] AMD-Vi: DEV_SELECT devid: 11:00.0 flags: 00
[ 1.218560] AMD-Vi: DEV_SELECT devid: 00:15.1 flags: 00
[ 1.218563] AMD-Vi: DEV_SELECT devid: 12:00.0 flags: 00
[ 1.218566] AMD-Vi: DEV_SELECT devid: 00:15.2 flags: 00
[ 1.218569] AMD-Vi: DEV_SELECT devid: 13:00.0 flags: 00
[ 1.218571] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:16.0 flags: 00
[ 1.218574] AMD-Vi: DEV_RANGE_END devid: 00:16.2
[ 1.218577] AMD-Vi: DEV_SPECIAL(IOAPIC[9]) devid: 00:14.0
[ 1.218581] AMD-Vi: DEV_SPECIAL(HPET[0]) devid: 00:14.0
[ 1.218584] AMD-Vi: DEV_SPECIAL(IOAPIC[10]) devid: 00:00.1
[ 1.362967] iommu: Adding device 0000:00:00.0 to group 0
[ 1.363353] iommu: Adding device 0000:00:02.0 to group 1
[ 1.363731] iommu: Adding device 0000:00:04.0 to group 2
[ 1.364114] iommu: Adding device 0000:00:09.0 to group 3
[ 1.364497] iommu: Adding device 0000:00:0a.0 to group 4
[ 1.364878] iommu: Adding device 0000:00:0b.0 to group 5
[ 1.365262] iommu: Adding device 0000:00:0d.0 to group 6
[ 1.365640] iommu: Adding device 0000:00:11.0 to group 7
[ 1.366042] iommu: Adding device 0000:00:12.0 to group 8
[ 1.366064] iommu: Adding device 0000:00:12.2 to group 8
[ 1.366462] iommu: Adding device 0000:00:13.0 to group 9
[ 1.366484] iommu: Adding device 0000:00:13.2 to group 9
[ 1.366866] iommu: Adding device 0000:00:14.0 to group 10
[ 1.367251] iommu: Adding device 0000:00:14.1 to group 11
[ 1.367632] iommu: Adding device 0000:00:14.2 to group 12
[ 1.368016] iommu: Adding device 0000:00:14.3 to group 13
[ 1.368428] iommu: Adding device 0000:00:14.4 to group 14
[ 1.368809] iommu: Adding device 0000:00:14.5 to group 15
[ 1.369225] iommu: Adding device 0000:00:15.0 to group 16
[ 1.369251] iommu: Adding device 0000:00:15.1 to group 16
[ 1.369276] iommu: Adding device 0000:00:15.2 to group 16
[ 1.369675] iommu: Adding device 0000:00:16.0 to group 17
[ 1.369699] iommu: Adding device 0000:00:16.2 to group 17
[ 1.370090] iommu: Adding device 0000:01:00.0 to group 18
[ 1.370474] iommu: Adding device 0000:02:00.0 to group 19
[ 1.370484] iommu: Adding device 0000:03:04.0 to group 19
[ 1.370494] iommu: Adding device 0000:04:04.0 to group 19
[ 1.370504] iommu: Adding device 0000:04:05.0 to group 19
[ 1.370514] iommu: Adding device 0000:04:06.0 to group 19
[ 1.370524] iommu: Adding device 0000:04:07.0 to group 19
[ 1.370534] iommu: Adding device 0000:04:08.0 to group 19
[ 1.370545] iommu: Adding device 0000:04:09.0 to group 19
[ 1.370556] iommu: Adding device 0000:04:0a.0 to group 19
[ 1.370566] iommu: Adding device 0000:05:00.0 to group 19
[ 1.370949] iommu: Adding device 0000:06:00.0 to group 20
[ 1.371336] iommu: Adding device 0000:07:00.0 to group 21
[ 1.371718] iommu: Adding device 0000:08:00.0 to group 22
[ 1.371729] iommu: Adding device 0000:09:04.0 to group 22
[ 1.371740] iommu: Adding device 0000:0a:04.0 to group 22
[ 1.371750] iommu: Adding device 0000:0a:05.0 to group 22
[ 1.371760] iommu: Adding device 0000:0a:06.0 to group 22
[ 1.371770] iommu: Adding device 0000:0a:07.0 to group 22
[ 1.371780] iommu: Adding device 0000:0a:08.0 to group 22
[ 1.371790] iommu: Adding device 0000:0a:09.0 to group 22
[ 1.371800] iommu: Adding device 0000:0a:0a.0 to group 22
[ 1.371811] iommu: Adding device 0000:0b:00.0 to group 22
[ 1.371822] iommu: Adding device 0000:0c:00.0 to group 22
[ 1.371832] iommu: Adding device 0000:0d:00.0 to group 22
[ 1.372222] iommu: Adding device 0000:0e:00.0 to group 23
[ 1.372232] iommu: Adding device 0000:0f:04.0 to group 23
[ 1.372243] iommu: Adding device 0000:10:06.0 to group 14
[ 1.372258] iommu: Adding device 0000:11:00.0 to group 16
[ 1.372271] iommu: Adding device 0000:12:00.0 to group 16
[ 1.372283] iommu: Adding device 0000:13:00.0 to group 16
[ 1.372286] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 1.372361] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.374404] perf: AMD NB counters detected
[ 1.374464] LVT offset 0 assigned for vector 0x400
[ 1.374484] perf: AMD IBS detected (0x000000ff)
[ 1.375062] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.375274] Initialise system trusted keyring
[ 1.375404] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 1.375407] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.376803] zbud: loaded
[ 1.376972] VFS: Disk quotas dquot_6.6.0
[ 1.377017] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.377670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.377677] io scheduler noop registered
[ 1.377680] io scheduler deadline registered
[ 1.377706] io scheduler cfq registered (default)
[ 1.378493] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.378501] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.378526] vesafb: mode is 1280x1024x16, linelength=2560, pages=0
[ 1.378529] vesafb: scrolling: redraw
[ 1.378532] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.378539] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override.
[ 1.378550] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90000400000, using 2560k, total 2560k
[ 1.394060] Console: switching to colour frame buffer device 160x64
[ 1.409535] fb0: VESA VGA frame buffer device
[ 1.409647] GHES: HEST is not enabled!
[ 1.409751] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.430360] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.431165] Non-volatile memory driver v1.3
[ 1.431265] Linux agpgart interface v0.103
[ 1.434278] ahci 0000:00:11.0: version 3.0
[ 1.434349] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.434490] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.435132] scsi host0: ahci
[ 1.435265] scsi host1: ahci
[ 1.435393] scsi host2: ahci
[ 1.435519] scsi host3: ahci
[ 1.435607] ata1: SATA max UDMA/133 abar m1024@0xd880b000 port 0xd880b100 irq 19
[ 1.435737] ata2: SATA max UDMA/133 abar m1024@0xd880b000 port 0xd880b180 irq 19
[ 1.435866] ata3: SATA max UDMA/133 abar m1024@0xd880b000 port 0xd880b200 irq 19
[ 1.435995] ata4: SATA max UDMA/133 abar m1024@0xd880b000 port 0xd880b280 irq 19
[ 1.436314] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.436456] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.436885] scsi host4: ahci
[ 1.437023] scsi host5: ahci
[ 1.437113] ata5: SATA max UDMA/133 abar m512@0xde010000 port 0xde010100 irq 29
[ 1.437241] ata6: SATA max UDMA/133 abar m512@0xde010000 port 0xde010180 irq 29
[ 1.437503] ahci 0000:13:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.437644] ahci 0000:13:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.438097] scsi host6: ahci
[ 1.438234] scsi host7: ahci
[ 1.438323] ata7: SATA max UDMA/133 abar m512@0xddd10000 port 0xddd10100 irq 28
[ 1.438452] ata8: SATA max UDMA/133 abar m512@0xddd10000 port 0xddd10180 irq 28
[ 1.438594] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.438710] ehci-pci: EHCI PCI platform driver
[ 1.438862] QUIRK: Enable AMD PLL fix
[ 1.438884] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.438978] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.439113] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.439271] ehci-pci 0000:00:12.2: debug port 1
[ 1.439375] ehci-pci 0000:00:12.2: irq 17, io mem 0xd8809000
[ 1.445022] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.445169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.445286] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.445411] usb usb1: Product: EHCI Host Controller
[ 1.449827] usb usb1: Manufacturer: Linux 4.4.0-lcrs ehci_hcd
[ 1.454261] usb usb1: SerialNumber: 0000:00:12.2
[ 1.458783] hub 1-0:1.0: USB hub found
[ 1.463171] hub 1-0:1.0: 5 ports detected
[ 1.467708] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.472060] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.476508] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.480999] ehci-pci 0000:00:13.2: debug port 1
[ 1.485477] ehci-pci 0000:00:13.2: irq 17, io mem 0xd8807000
[ 1.495023] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.499428] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.503821] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.508233] usb usb2: Product: EHCI Host Controller
[ 1.512660] usb usb2: Manufacturer: Linux 4.4.0-lcrs ehci_hcd
[ 1.517124] usb usb2: SerialNumber: 0000:00:13.2
[ 1.521649] hub 2-0:1.0: USB hub found
[ 1.526044] hub 2-0:1.0: 5 ports detected
[ 1.530571] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.534930] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.539333] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.543762] ehci-pci 0000:00:16.2: debug port 1
[ 1.548115] ehci-pci 0000:00:16.2: irq 17, io mem 0xd8804000
[ 1.558024] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.562262] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.566494] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.570739] usb usb3: Product: EHCI Host Controller
[ 1.574957] usb usb3: Manufacturer: Linux 4.4.0-lcrs ehci_hcd
[ 1.579171] usb usb3: SerialNumber: 0000:00:16.2
[ 1.583419] hub 3-0:1.0: USB hub found
[ 1.587532] hub 3-0:1.0: 4 ports detected
[ 1.591736] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.595849] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.599990] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.604093] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.608488] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.612905] mousedev: PS/2 mouse device common for all mice
[ 1.617401] rtc_cmos 00:05: RTC can wake from S4
[ 1.621865] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.626316] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.630920] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.635537] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.640205] usbcore: registered new interface driver usbhid
[ 1.644763] usbhid: USB HID core driver
[ 1.649450] NET: Registered protocol family 10
[ 1.654042] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.658244] Key type dns_resolver registered
[ 1.663511] microcode: CPU0: patch_level=0x0600063d
[ 1.668180] microcode: CPU1: patch_level=0x0600063d
[ 1.672787] microcode: CPU2: patch_level=0x0600063d
[ 1.677295] microcode: CPU3: patch_level=0x0600063d
[ 1.681811] microcode: CPU4: patch_level=0x0600063d
[ 1.686236] microcode: CPU5: patch_level=0x0600063d
[ 1.690664] microcode: CPU6: patch_level=0x0600063d
[ 1.694997] microcode: CPU7: patch_level=0x0600063d
[ 1.699276] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.703761] registered taskstats version 1
[ 1.708128] Loading compiled-in X.509 certificates
[ 1.712490] zswap: loaded using pool lzo/zbud
[ 1.717445] Magic number: 0:920:398
[ 1.721847] rtc_cmos 00:05: setting system clock to 2016-01-12 21:22:19 UTC (1452633739)
[ 1.741074] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.745529] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.898040] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.900055] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.900081] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.900105] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.915218] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.919436] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.923584] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 1.944225] ata1.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133
[ 1.948393] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.952571] ata2.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
[ 1.956767] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.961028] ata4.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
[ 1.965257] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.975704] ata3.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
[ 1.979944] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.002529] ata1.00: configured for UDMA/133
[ 2.006803] ata2.00: configured for UDMA/133
[ 2.011030] ata4.00: configured for UDMA/133
[ 2.011145] scsi 0:0:0:0: Direct-Access ATA ST3160815AS B PQ: 0 ANSI: 5
[ 2.011300] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.011335] sd 0:0:0:0: [sda] Write Protect is off
[ 2.011337] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.011346] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.017152] scsi 1:0:0:0: Direct-Access ATA ST3160815AS D PQ: 0 ANSI: 5
[ 2.017281] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.017333] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.017334] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.017351] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.049933] ata3.00: configured for UDMA/133
[ 2.054433] scsi 2:0:0:0: Direct-Access ATA ST3160811AS E PQ: 0 ANSI: 5
[ 2.059049] sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.063609] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.063715] scsi 3:0:0:0: Direct-Access ATA ST3160815AS D PQ: 0 ANSI: 5
[ 2.063833] sd 3:0:0:0: [sdd] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.063856] sd 3:0:0:0: [sdd] Write Protect is off
[ 2.063858] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.063866] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.086522] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.086534] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.104990] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.108800] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 >
[ 2.111331] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.118521] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.150272] sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 sdd7 >
[ 2.154925] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 2.184280] sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 >
[ 2.188856] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.374045] tsc: Refined TSC clocksource calibration: 3616.532 MHz
[ 2.378313] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x342154e8e1a, max_idle_ns: 440795344476 ns
[ 3.382146] clocksource: Switched to clocksource tsc
[ 6.919175] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 7.381190] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.385573] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.389948] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 7.394422] ata7: limiting SATA link speed to 1.5 Gbps
[ 12.385336] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 12.389995] ata8: limiting SATA link speed to 1.5 Gbps
[ 12.854345] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.859153] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.863951] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 17.858493] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 18.321499] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 18.326221] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 18.342181] Freeing unused kernel memory: 984K (ffffffff80ecf000 - ffffffff80fc5000)
[ 18.346923] Write protecting the kernel read-only data: 12288k
[ 18.352204] Freeing unused kernel memory: 1972K (ffff880000813000 - ffff880000a00000)
[ 18.359075] Freeing unused kernel memory: 1132K (ffff880000ce5000 - ffff880000e00000)
[ 18.365298] random: systemd urandom read with 88 bits of entropy available
[ 18.370340] systemd[1]: systemd 210 running in system mode. (+PAM -LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP +APPARMOR)
[ 18.375628] systemd[1]: Detected architecture 'x86-64'.
[ 18.380739] systemd[1]: Running in initial RAM disk.
[ 18.402317] systemd[1]: Inserted module 'autofs4'
[ 18.407680] systemd[1]: Set hostname to <harley>.
[ 18.445102] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dST3160815AS_6RACD7A6\x2dpart5.device...
[ 18.455990] systemd[1]: Starting Timers.
[ 18.466808] systemd[1]: Reached target Timers.
[ 18.472193] systemd[1]: Starting -.slice.
[ 18.490693] systemd[1]: Created slice -.slice.
[ 18.496084] systemd[1]: Starting udev Control Socket.
[ 18.506955] systemd[1]: Listening on udev Control Socket.
[ 18.512373] systemd[1]: Starting udev Kernel Socket.
[ 18.523151] systemd[1]: Listening on udev Kernel Socket.
[ 18.528499] systemd[1]: Starting Journal Socket.
[ 18.539107] systemd[1]: Listening on Journal Socket.
[ 18.544391] systemd[1]: Starting Sockets.
[ 18.554759] systemd[1]: Reached target Sockets.
[ 18.559899] systemd[1]: Starting System Slice.
[ 18.570146] systemd[1]: Created slice System Slice.
[ 18.575211] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 18.585418] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 18.590654] systemd[1]: Starting dracut cmdline hook...
[ 18.606677] systemd[1]: Starting Load Kernel Modules...
[ 18.617429] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 18.622978] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.623010] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 18.623041] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 18.623070] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 18.661610] systemd[1]: Starting Journal Service...
[ 18.672587] systemd[1]: Starting Slices.
[ 18.683768] systemd[1]: Reached target Slices.
[ 18.689156] systemd[1]: Starting Setup Virtual Console...
[ 18.705591] systemd[1]: Starting Swap.
[ 18.715918] systemd[1]: Reached target Swap.
[ 18.715931] systemd[1]: Starting Local File Systems.
[ 18.731623] systemd[1]: Reached target Local File Systems.
[ 18.757577] systemd[1]: Started Journal Service.
[ 18.875440] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 18.880925] wmi: Mapper loaded
[ 18.881541] ACPI: Power Button [PWRB]
[ 18.881785] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 18.882068] ACPI: Power Button [PWRF]
[ 18.900019] ohci-pci: OHCI PCI platform driver
[ 18.903942] scsi host8: pata_atiixp
[ 18.904052] scsi host9: pata_atiixp
[ 18.904218] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 18.904219] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 18.906617] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 18.906624] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 18.906656] ohci-pci 0000:00:12.0: irq 18, io mem 0xd880a000
[ 18.918391] random: nonblocking pool is initialized
[ 18.961654] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 18.966903] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.971843] usb usb4: Product: OHCI PCI host controller
[ 18.976830] usb usb4: Manufacturer: Linux 4.4.0-lcrs ohci_hcd
[ 18.981762] usb usb4: SerialNumber: 0000:00:12.0
[ 18.981892] hub 4-0:1.0: USB hub found
[ 18.981902] hub 4-0:1.0: 5 ports detected
[ 18.982170] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 18.982175] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 18.982196] ohci-pci 0000:00:13.0: irq 18, io mem 0xd8808000
[ 19.036570] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 19.041562] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.046903] usb usb5: Product: OHCI PCI host controller
[ 19.051650] usb usb5: Manufacturer: Linux 4.4.0-lcrs ohci_hcd
[ 19.051651] usb usb5: SerialNumber: 0000:00:13.0
[ 19.051763] hub 5-0:1.0: USB hub found
[ 19.051775] hub 5-0:1.0: 5 ports detected
[ 19.051997] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 19.052001] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 19.052029] ohci-pci 0000:00:14.5: irq 18, io mem 0xd8806000
[ 19.072961] ata9.00: ATAPI: SONY DVD RW AD-7260S, 1.61, max UDMA/100
[ 19.073197] ata9.01: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 19.073199] ata9.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 19.073201] ata9.00: limited to UDMA/33 due to 40-wire cable
[ 19.073202] ata9.01: limited to UDMA/33 due to 40-wire cable
[ 19.079761] ata9.00: configured for UDMA/33
[ 19.087176] ata9.01: configured for UDMA/33
[ 19.099939] scsi 8:0:0:0: CD-ROM SONY DVD RW AD-7260S 1.61 PQ: 0 ANSI: 5
[ 19.109317] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 19.109318] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.109319] usb usb6: Product: OHCI PCI host controller
[ 19.109320] usb usb6: Manufacturer: Linux 4.4.0-lcrs ohci_hcd
[ 19.109321] usb usb6: SerialNumber: 0000:00:14.5
[ 19.109431] hub 6-0:1.0: USB hub found
[ 19.109439] hub 6-0:1.0: 2 ports detected
[ 19.109621] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 19.109625] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 19.109644] ohci-pci 0000:00:16.0: irq 18, io mem 0xd8805000
[ 19.110393] scsi 8:0:0:0: Attached scsi generic sg4 type 5
[ 19.110507] scsi 8:0:1:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 19.110637] sd 8:0:1:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 19.110662] sd 8:0:1:0: Attached scsi generic sg5 type 0
[ 19.110680] sd 8:0:1:0: [sde] Write Protect is off
[ 19.110682] sd 8:0:1:0: [sde] Mode Sense: 00 3a 00 00
[ 19.110701] sd 8:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.125275] sde: sde1
[ 19.125436] sd 8:0:1:0: [sde] Attached SCSI disk
[ 19.164596] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 19.164598] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.164599] usb usb7: Product: OHCI PCI host controller
[ 19.164599] usb usb7: Manufacturer: Linux 4.4.0-lcrs ohci_hcd
[ 19.164600] usb usb7: SerialNumber: 0000:00:16.0
[ 19.164708] hub 7-0:1.0: USB hub found
[ 19.164716] hub 7-0:1.0: 4 ports detected
[ 19.253382] sr 8:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 19.253383] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 19.253594] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 19.305535] usb 4-4: new low-speed USB device number 2 using ohci-pci
[ 19.456568] usb 4-4: New USB device found, idVendor=046d, idProduct=c00e
[ 19.456688] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 19.456812] usb 4-4: Product: USB-PS/2 Optical Mouse
[ 19.456897] usb 4-4: Manufacturer: Logitech
[ 19.463793] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/0003:046D:C00E.0001/input/input3
[ 19.464101] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-4/input0
[ 24.070661] scsi host11: Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
<Adaptec 29320LPE PCIe Ultra320 SCSI adapter>
aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
[ 24.071184] AMD-Vi: Event logged [
[ 24.071187] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 24.071222] scsi11: Received split completion error message in OVLY
[ 24.071222] scsi11: Count not complete in OVLY
[ 24.071226] scsi11: PCI error Interrupt
[ 24.071235] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 24.071235] Card was paused
[ 24.071238] INTSTAT[0x11]
[ 24.071239] :(SPLTINT
[ 24.071239] |PCIINT
[ 24.071239] )
[ 24.071242] SELOID[0x0]
[ 24.071243]
[ 24.071246] SELID[0x0]
[ 24.071246]
[ 24.071249] HS_MAILBOX[0x0]
[ 24.071250]
[ 24.071252] INTCTL[0x0]
[ 24.071252]
[ 24.071254] SEQINTSTAT[0x0]
[ 24.071254]
[ 24.071258] SAVED_MODE[0xff]
[ 24.071258]
[ 24.071261] DFFSTAT[0x33]
[ 24.071261] :(CURRFIFO_NONE
[ 24.071261] |FIFO0FREE
[ 24.071262] |FIFO1FREE
[ 24.071262] )
[ 24.071265] SCSISIGI[0x0]
[ 24.071265] :(P_DATAOUT
[ 24.071266] )
[ 24.071269] SCSIPHASE[0x0]
[ 24.071269]
[ 24.071272] SCSIBUS[0x0]
[ 24.071272]
[ 24.071275] LASTPHASE[0x1]
[ 24.071275] :(P_DATAOUT
[ 24.071275] |P_BUSFREE
[ 24.071276] )
[ 24.071278] SCSISEQ0[0x0]
[ 24.071279]
[ 24.071282] SCSISEQ1[0x12]
[ 24.071282] :(ENAUTOATNP
[ 24.071282] |ENRSELI
[ 24.071282] )
[ 24.071285] SEQCTL0[0x0]
[ 24.071285]
[ 24.071288] SEQINTCTL[0x0]
[ 24.071288]
[ 24.071291] SEQ_FLAGS[0x0]
[ 24.071291]
[ 24.071294] SEQ_FLAGS2[0x0]
[ 24.071294]
[ 24.071299] QFREEZE_COUNT[0x0]
[ 24.071300]
[ 24.071305] KERNEL_QFREEZE_COUNT[0x0]
[ 24.071305]
[ 24.071310] MK_MESSAGE_SCB[0xff00]
[ 24.071310]
[ 24.071313] MK_MESSAGE_SCSIID[0xff]
[ 24.071313]
[ 24.071316] SSTAT0[0x0]
[ 24.071316]
[ 24.071319] SSTAT1[0x0]
[ 24.071319]
[ 24.071322] SSTAT2[0x0]
[ 24.071322]
[ 24.071325] SSTAT3[0x0]
[ 24.071325]
[ 24.071328] PERRDIAG[0x0]
[ 24.071328]
[ 24.071331] SIMODE1[0xa4]
[ 24.071331] :(ENSCSIPERR
[ 24.071331] |ENSCSIRST
[ 24.071332] |ENSELTIMO
[ 24.071332] )
[ 24.071335] LQISTAT0[0x0]
[ 24.071335]
[ 24.071338] LQISTAT1[0x0]
[ 24.071338]
[ 24.071340] LQISTAT2[0x0]
[ 24.071341]
[ 24.071343] LQOSTAT0[0x0]
[ 24.071344]
[ 24.071346] LQOSTAT1[0x0]
[ 24.071347]
[ 24.071350] LQOSTAT2[0x0]
[ 24.071350]
[ 24.071369]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 24.071384] qinstart = 0 qinfifonext = 1
QINFIFO:
[ 24.071384] 0x3
[ 24.071386]
WAITING_TID_QUEUES:
[ 24.071405] Pending list:
[ 24.071408]
3 FIFO_USE[0x0]
[ 24.071412] SCB_CONTROL[0x0]
[ 24.071412]
[ 24.071415] SCB_SCSIID[0x0]
[ 24.071415]
[ 24.071415]
Total 1
[ 24.071416] Kernel Free SCB list:
[ 24.071416] 2
[ 24.071416] 1
[ 24.071416] 0
[ 24.071417] Sequencer Complete DMA-inprog list:
[ 24.071422] Sequencer Complete list:
[ 24.071427] Sequencer DMA-Up and Complete list:
[ 24.071432] Sequencer On QFreeze and Complete list:
[ 24.071452]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 24.071455] SEQIMODE[0x3f]
[ 24.071456] :(ENCFG4TCMD
[ 24.071456] |ENCFG4ICMD
[ 24.071456] |ENCFG4TSTAT
[ 24.071457] |ENCFG4ISTAT
[ 24.071457] |ENCFG4DATA
[ 24.071457] |ENSAVEPTRS
[ 24.071457] )
[ 24.071459] SEQINTSRC[0x0]
[ 24.071459]
[ 24.071462] DFCNTRL[0x0]
[ 24.071462]
[ 24.071465] DFSTATUS[0x89]
[ 24.071465] :(FIFOEMP
[ 24.071465] |HDONE
[ 24.071466] |PRELOAD_AVAIL
[ 24.071466] )
[ 24.071469] SG_CACHE_SHADOW[0x2]
[ 24.071469] :(LAST_SEG
[ 24.071469] )
[ 24.071472] SG_STATE[0x0]
[ 24.071473]
[ 24.071475] DFFSXFRCTL[0x0]
[ 24.071476]
[ 24.071479] SOFFCNT[0x0]
[ 24.071479]
[ 24.071481] MDFFSTAT[0x5]
[ 24.071482] :(FIFOFREE
[ 24.071482] |DLZERO
[ 24.071482] )
[ 24.071511] SHADDR = 0x00, SHCNT = 0x0
[ 24.071538] HADDR = 0x00, HCNT = 0x0
[ 24.071540] CCSGCTL[0x10]
[ 24.071541] :(SG_CACHE_AVAIL
[ 24.071541] )
[ 24.071552]
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 24.071555] SEQIMODE[0x3f]
[ 24.071555] :(ENCFG4TCMD
[ 24.071555] |ENCFG4ICMD
[ 24.071555] |ENCFG4TSTAT
[ 24.071556] |ENCFG4ISTAT
[ 24.071556] |ENCFG4DATA
[ 24.071556] |ENSAVEPTRS
[ 24.071556] )
[ 24.071559] SEQINTSRC[0x0]
[ 24.071559]
[ 24.071562] DFCNTRL[0x0]
[ 24.071562]
[ 24.071565] DFSTATUS[0x89]
[ 24.071565] :(FIFOEMP
[ 24.071566] |HDONE
[ 24.071566] |PRELOAD_AVAIL
[ 24.071566] )
[ 24.071569] SG_CACHE_SHADOW[0x2]
[ 24.071569] :(LAST_SEG
[ 24.071569] )
[ 24.071572] SG_STATE[0x0]
[ 24.071573]
[ 24.071576] DFFSXFRCTL[0x0]
[ 24.071576]
[ 24.071579] SOFFCNT[0x0]
[ 24.071579]
[ 24.071581] MDFFSTAT[0x5]
[ 24.071582] :(FIFOFREE
[ 24.071582] |DLZERO
[ 24.071582] )
[ 24.071608] SHADDR = 0x00, SHCNT = 0x0
[ 24.071636] HADDR = 0x00, HCNT = 0x0
[ 24.071638] CCSGCTL[0x10]
[ 24.071639] :(SG_CACHE_AVAIL
[ 24.071639] )
[ 24.071639]
LQIN:
[ 24.071642] 0x0
[ 24.071645] 0x0
[ 24.071648] 0x0
[ 24.071651] 0x0
[ 24.071654] 0x0
[ 24.071657] 0x0
[ 24.071660] 0x0
[ 24.071663] 0x0
[ 24.071666] 0x0
[ 24.071669] 0x0
[ 24.071672] 0x0
[ 24.071675] 0x0
[ 24.071678] 0x0
[ 24.071681] 0x0
[ 24.071684] 0x0
[ 24.071687] 0x0
[ 24.071690] 0x0
[ 24.071693] 0x0
[ 24.071696] 0x0
[ 24.071699] 0x0
[ 24.071707] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 24.071712] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 24.071717] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 24.071720] SIMODE0[0x6c]
[ 24.071720] :(ENOVERRUN
[ 24.071721] |ENIOERR
[ 24.071721] |ENSELDI
[ 24.071721] |ENSELDO
[ 24.071721] )
[ 24.071725] CCSCBCTL[0x4]
[ 24.071725] :(CCSCBDIR
[ 24.071725] )
[ 24.071741] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 24.071757] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 24.071772] CDB 0 0 0 0 0 0
[ 24.071773] STACK:
[ 24.071778] 0x1f
[ 24.071783] 0x0
[ 24.071789] 0x0
[ 24.071794] 0x0
[ 24.071799] 0x0
[ 24.071804] 0x0
[ 24.071809] 0x0
[ 24.071815] 0x0
[ 24.071818]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 24.071838] scsi11: Received a Target Abort in CMC
[ 24.071870] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 24.071908] scsi11: Received split completion error message in OVLY
[ 24.156698] IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 24.166799] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 24.171981] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f80 flags=0x0050]
[ 24.177114] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b80 flags=0x0050]
[ 24.182218] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001840 flags=0x0050]
[ 24.187243] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001bc0 flags=0x0050]
[ 24.192186] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001880 flags=0x0050]
[ 24.197063] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c00 flags=0x0050]
[ 24.201871] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000018c0 flags=0x0050]
[ 24.206599] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c40 flags=0x0050]
[ 24.211242] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001900 flags=0x0050]
[ 24.215823] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c80 flags=0x0050]
[ 24.220337] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001940 flags=0x0050]
[ 24.224775] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001cc0 flags=0x0050]
[ 24.229132] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001980 flags=0x0050]
[ 24.233394] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d00 flags=0x0050]
[ 24.237559] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000019c0 flags=0x0050]
[ 24.241640] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d40 flags=0x0050]
[ 24.245644] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a00 flags=0x0050]
[ 24.249593] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d80 flags=0x0050]
[ 24.253528] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a40 flags=0x0050]
[ 24.257381] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001dc0 flags=0x0050]
[ 24.261154] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a80 flags=0x0050]
[ 24.264903] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e00 flags=0x0050]
[ 24.268632] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001ac0 flags=0x0050]
[ 24.272334] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e40 flags=0x0050]
[ 24.275969] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b00 flags=0x0050]
[ 24.279544] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e80 flags=0x0050]
[ 24.283094] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b40 flags=0x0050]
[ 24.286605] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001ec0 flags=0x0050]
[ 24.290096] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001fc0 flags=0x0050]
[ 24.293556] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f00 flags=0x0050]
[ 24.296983] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f40 flags=0x0050]
[ 33.925941] scsi host10: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
[ 33.940800] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0000 address=0x00000000000040c0 flags=0x0050]
[ 33.946140] scsi10: PCI error Interrupt at seqaddr = 0x193
[ 33.949610] scsi10: Received a Target Abort
[ 33.953041] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0000 address=0x00000000000040c0 flags=0x0050]
[ 33.958460] scsi10: PCI error Interrupt at seqaddr = 0x193
[ 33.962058] scsi10: Received a Target Abort
[ 33.965590] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0000 address=0x00000000000040c0 flags=0x0050]
[ 33.971091] scsi10: PCI error Interrupt at seqaddr = 0x193
[ 33.974699] scsi10: Received a Target Abort
[ 33.978267] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0000 address=0x00000000000040c0 flags=0x0050]
[ 33.983814] scsi10: PCI error Interrupt at seqaddr = 0x193
[ 33.987476] scsi10: Received a Target Abort
[ 33.991078] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0000 address=0x00000000000040c0 flags=0x0050]
[ 33.996686] scsi10: PCI error Interrupt at seqaddr = 0x193
[ 34.000478] scsi10: Received a Target Abort
[ 34.004283] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0000 address=0x00000000000040c0 flags=0x0050]
[ 34.010073] scsi10: PCI error Interrupt at seqaddr = 0x193
[ 34.014033] scsi10: Received a Target Abort
[ 34.017982] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0000 address=0x00000000000040c0 flags=0x0050]
[ 34.023942] scsi10: PCI error Interrupt at seqaddr = 0x193
[ 34.028037] scsi10: Received a Target Abort
[ 34.032148] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0000 address=0x00000000000040c0 flags=0x0050]
[ 34.038247] scsi10: PCI error Interrupt at seqaddr = 0x193
[ 34.042486] scsi10: Received a Target Abort
[ 34.046727] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0000 address=0x00000000000040c0 flags=0x0050]
[ 34.052960] scsi10: PCI error Interrupt at seqaddr = 0x193
[ 34.057339] scsi10: Received a Target Abort
[ 34.061649] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0000 address=0x00000000000040c0 flags=0x0050]
[ 34.067871] scsi10: PCI error Interrupt at seqaddr = 0x193
[ 34.072323] scsi10: Received a Target Abort
[ 34.076828] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0000 address=0x00000000000040c0 flags=0x0050]
[ 34.079264] scsi10: PCI error Interrupt at seqaddr = 0x193
[ 34.079264] scsi10: Received a Target Abort
[ 34.091178] AMD-Vi: Event logged [IO_PAGE_FAULT device=09:00.0 domain=0x0000 address=0x00000000000040c0 flags=0x0050]
[ 44.836250] scsi 11:0:0:0: tag#0 Attempting to queue an ABORT message:
[ 44.841405] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 44.847147] scsi11: At time of recovery, card was paused
[ 44.852406] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x31 Mode 0x11
[ 44.863202] Card was paused
[ 44.868651] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 44.874249] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 44.880052] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 44.885915] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 44.891839] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 44.897874] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 44.903964] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 44.910184] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 44.916489] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 44.922917] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 44.929415] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 44.935912]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 44.949022] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 44.969073] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 44.989513] Kernel Free SCB list: 2 1 0
[ 44.996312] Sequencer Complete DMA-inprog list:
[ 45.003080] Sequencer Complete list:
[ 45.009793] Sequencer DMA-Up and Complete list:
[ 45.016495] Sequencer On QFreeze and Complete list:
[ 45.023108]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 45.042300] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 45.048721] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 45.055194] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 45.061603] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 45.068018] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 45.086802] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 45.093177] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 45.099514] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 45.105787] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 45.112154] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 45.124704] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 45.130962] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 45.137117] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 45.149153] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 45.155159] CCSCBCTL[0x4]:(CCSCBDIR)
[ 45.161048] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 45.166975] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 45.172844] CDB 0 0 0 0 0 0
[ 45.178566] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 45.190060] scsi11:0:0:0: Cmd aborted from QINFIFO
[ 45.195825] AMD-Vi: Event logged [
[ 45.195827] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 45.195864] scsi11: Received split completion error message in OVLY
[ 45.195865] scsi11: Count not complete in OVLY
[ 45.195869] scsi11: PCI error Interrupt
[ 45.195877] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 45.195877] Card was paused
[ 45.195880] INTSTAT[0x11]
[ 45.195881] :(SPLTINT
[ 45.195881] |PCIINT
[ 45.195881] )
[ 45.195884] SELOID[0x0]
[ 45.195885]
[ 45.195887] SELID[0x0]
[ 45.195887]
[ 45.195890] HS_MAILBOX[0x0]
[ 45.195890]
[ 45.195892] INTCTL[0x0]
[ 45.195893]
[ 45.195895] SEQINTSTAT[0x0]
[ 45.195895]
[ 45.195899] SAVED_MODE[0xff]
[ 45.195899]
[ 45.195902] DFFSTAT[0x33]
[ 45.195902] :(CURRFIFO_NONE
[ 45.195902] |FIFO0FREE
[ 45.195902] |FIFO1FREE
[ 45.195903] )
[ 45.195906] SCSISIGI[0x0]
[ 45.195906] :(P_DATAOUT
[ 45.195906] )
[ 45.195910] SCSIPHASE[0x0]
[ 45.195910]
[ 45.195913] SCSIBUS[0x0]
[ 45.195913]
[ 45.195916] LASTPHASE[0x1]
[ 45.195916] :(P_DATAOUT
[ 45.195916] |P_BUSFREE
[ 45.195916] )
[ 45.195919] SCSISEQ0[0x0]
[ 45.195920]
[ 45.195922] SCSISEQ1[0x12]
[ 45.195923] :(ENAUTOATNP
[ 45.195923] |ENRSELI
[ 45.195923] )
[ 45.195926] SEQCTL0[0x0]
[ 45.195926]
[ 45.195929] SEQINTCTL[0x0]
[ 45.195929]
[ 45.195932] SEQ_FLAGS[0x0]
[ 45.195932]
[ 45.195935] SEQ_FLAGS2[0x0]
[ 45.195935]
[ 45.195940] QFREEZE_COUNT[0x0]
[ 45.195941]
[ 45.195946] KERNEL_QFREEZE_COUNT[0x0]
[ 45.195946]
[ 45.195951] MK_MESSAGE_SCB[0xff00]
[ 45.195952]
[ 45.195954] MK_MESSAGE_SCSIID[0xff]
[ 45.195955]
[ 45.195958] SSTAT0[0x0]
[ 45.195958]
[ 45.195961] SSTAT1[0x0]
[ 45.195961]
[ 45.195964] SSTAT2[0x0]
[ 45.195964]
[ 45.195967] SSTAT3[0x0]
[ 45.195967]
[ 45.195970] PERRDIAG[0x0]
[ 45.195970]
[ 45.195973] SIMODE1[0xa4]
[ 45.195973] :(ENSCSIPERR
[ 45.195974] |ENSCSIRST
[ 45.195974] |ENSELTIMO
[ 45.195974] )
[ 45.195977] LQISTAT0[0x0]
[ 45.195978]
[ 45.195981] LQISTAT1[0x0]
[ 45.195981]
[ 45.195983] LQISTAT2[0x0]
[ 45.195984]
[ 45.195987] LQOSTAT0[0x0]
[ 45.195987]
[ 45.195989] LQOSTAT1[0x0]
[ 45.195990]
[ 45.195993] LQOSTAT2[0x0]
[ 45.195993]
[ 45.196014]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 45.196028] qinstart = 0 qinfifonext = 1
QINFIFO:
[ 45.196029] 0x3
[ 45.196030]
WAITING_TID_QUEUES:
[ 45.196049] Pending list:
[ 45.196052]
3 FIFO_USE[0x0]
[ 45.196056] SCB_CONTROL[0x0]
[ 45.196056]
[ 45.196059] SCB_SCSIID[0x0]
[ 45.196059]
[ 45.196059]
Total 1
[ 45.196060] Kernel Free SCB list:
[ 45.196060] 2
[ 45.196060] 1
[ 45.196060] 0
[ 45.196061] Sequencer Complete DMA-inprog list:
[ 45.196066] Sequencer Complete list:
[ 45.196071] Sequencer DMA-Up and Complete list:
[ 45.196077] Sequencer On QFreeze and Complete list:
[ 45.196096]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 45.196099] SEQIMODE[0x3f]
[ 45.196099] :(ENCFG4TCMD
[ 45.196099] |ENCFG4ICMD
[ 45.196100] |ENCFG4TSTAT
[ 45.196100] |ENCFG4ISTAT
[ 45.196100] |ENCFG4DATA
[ 45.196100] |ENSAVEPTRS
[ 45.196101] )
[ 45.196103] SEQINTSRC[0x0]
[ 45.196104]
[ 45.196106] DFCNTRL[0x0]
[ 45.196106]
[ 45.196109] DFSTATUS[0x89]
[ 45.196109] :(FIFOEMP
[ 45.196109] |HDONE
[ 45.196110] |PRELOAD_AVAIL
[ 45.196110] )
[ 45.196113] SG_CACHE_SHADOW[0x2]
[ 45.196113] :(LAST_SEG
[ 45.196113] )
[ 45.196117] SG_STATE[0x0]
[ 45.196117]
[ 45.196120] DFFSXFRCTL[0x0]
[ 45.196120]
[ 45.196123] SOFFCNT[0x0]
[ 45.196123]
[ 45.196125] MDFFSTAT[0x5]
[ 45.196126] :(FIFOFREE
[ 45.196126] |DLZERO
[ 45.196126] )
[ 45.196154] SHADDR = 0x00, SHCNT = 0x0
[ 45.196182] HADDR = 0x00, HCNT = 0x0
[ 45.196185] CCSGCTL[0x10]
[ 45.196185] :(SG_CACHE_AVAIL
[ 45.196186] )
[ 45.196197]
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 45.196199] SEQIMODE[0x3f]
[ 45.196200] :(ENCFG4TCMD
[ 45.196200] |ENCFG4ICMD
[ 45.196200] |ENCFG4TSTAT
[ 45.196200] |ENCFG4ISTAT
[ 45.196201] |ENCFG4DATA
[ 45.196201] |ENSAVEPTRS
[ 45.196201] )
[ 45.196204] SEQINTSRC[0x0]
[ 45.196204]
[ 45.196207] DFCNTRL[0x0]
[ 45.196207]
[ 45.196210] DFSTATUS[0x89]
[ 45.196210] :(FIFOEMP
[ 45.196210] |HDONE
[ 45.196211] |PRELOAD_AVAIL
[ 45.196211] )
[ 45.196214] SG_CACHE_SHADOW[0x2]
[ 45.196214] :(LAST_SEG
[ 45.196215] )
[ 45.196217] SG_STATE[0x0]
[ 45.196218]
[ 45.196220] DFFSXFRCTL[0x0]
[ 45.196220]
[ 45.196223] SOFFCNT[0x0]
[ 45.196224]
[ 45.196226] MDFFSTAT[0x5]
[ 45.196227] :(FIFOFREE
[ 45.196227] |DLZERO
[ 45.196227] )
[ 45.196255] SHADDR = 0x00, SHCNT = 0x0
[ 45.196283] HADDR = 0x00, HCNT = 0x0
[ 45.196285] CCSGCTL[0x10]
[ 45.196286] :(SG_CACHE_AVAIL
[ 45.196286] )
[ 45.196286]
LQIN:
[ 45.196288] 0x0
[ 45.196291] 0x0
[ 45.196294] 0x0
[ 45.196297] 0x0
[ 45.196300] 0x0
[ 45.196303] 0x0
[ 45.196306] 0x0
[ 45.196309] 0x0
[ 45.196312] 0x0
[ 45.196316] 0x0
[ 45.196319] 0x0
[ 45.196322] 0x0
[ 45.196325] 0x0
[ 45.196328] 0x0
[ 45.196331] 0x0
[ 45.196334] 0x0
[ 45.196337] 0x0
[ 45.196340] 0x0
[ 45.196342] 0x0
[ 45.196345] 0x0
[ 45.196354] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 45.196359] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 45.196364] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 45.196367] SIMODE0[0x6c]
[ 45.196367] :(ENOVERRUN
[ 45.196367] |ENIOERR
[ 45.196368] |ENSELDI
[ 45.196368] |ENSELDO
[ 45.196368] )
[ 45.196372] CCSCBCTL[0x4]
[ 45.196372] :(CCSCBDIR
[ 45.196372] )
[ 45.196388] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 45.196404] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 45.196419] CDB 0 0 0 0 0 0
[ 45.196420] STACK:
[ 45.196425] 0x1f
[ 45.196430] 0x0
[ 45.196436] 0x0
[ 45.196441] 0x0
[ 45.196446] 0x0
[ 45.196451] 0x0
[ 45.196456] 0x0
[ 45.196462] 0x0
[ 45.196465]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 45.196488] scsi11: Received a Target Abort in CMC
[ 45.196507] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 45.196543] scsi11: Received split completion error message in OVLY
[ 45.520418] IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 45.530539] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 45.535734] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002740 flags=0x0050]
[ 45.540874] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000027c0 flags=0x0050]
[ 45.545982] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002140 flags=0x0050]
[ 45.551015] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002100 flags=0x0050]
[ 45.555963] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000021c0 flags=0x0050]
[ 45.560842] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002180 flags=0x0050]
[ 45.565650] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002240 flags=0x0050]
[ 45.570378] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002200 flags=0x0050]
[ 45.575022] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000022c0 flags=0x0050]
[ 45.579598] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002280 flags=0x0050]
[ 45.584109] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002340 flags=0x0050]
[ 45.588541] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002300 flags=0x0050]
[ 45.592892] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000023c0 flags=0x0050]
[ 45.597148] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002380 flags=0x0050]
[ 45.601305] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002440 flags=0x0050]
[ 45.605384] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002400 flags=0x0050]
[ 45.609380] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000024c0 flags=0x0050]
[ 45.613316] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002480 flags=0x0050]
[ 45.617234] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002540 flags=0x0050]
[ 45.621078] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002500 flags=0x0050]
[ 45.624834] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000025c0 flags=0x0050]
[ 45.628562] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002580 flags=0x0050]
[ 45.632268] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002640 flags=0x0050]
[ 45.635960] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002600 flags=0x0050]
[ 45.639574] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000026c0 flags=0x0050]
[ 45.643123] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002680 flags=0x0050]
[ 45.646645] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002700 flags=0x0050]
[ 45.650128] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002780 flags=0x0050]
[ 54.820533] scsi 10:0:0:0: tag#0 Attempting to queue an ABORT message
[ 54.824063] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 54.827614] scsi10: At time of recovery, card was not paused
[ 54.831176] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi10: Dumping Card State while idle, at SEQADDR 0x193
[ 54.838511] Card was paused
[ 54.842092] ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x0
[ 54.845680] HCNT = 0x20 SCBPTR = 0x0
[ 54.849189] SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
[ 54.852738] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
[ 54.856299] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
[ 54.859860] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
[ 54.863480] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 54.867184] SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
[ 54.870822] DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
[ 54.874426] STACK: 0xe 0x0 0x0 0x187
SCB count = 4
[ 54.881407] Kernel NEXTQSCB = 2
[ 54.884810] Card NEXTQSCB = 3
[ 54.888114] QINFIFO entries: 3
[ 54.891397] Waiting Queue entries:
[ 54.894675] Disconnected Queue entries:
[ 54.897947] QOUTFIFO entries:
[ 54.901175] Sequencer Free SCB List: 1 2
[ 54.904403] Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 54.910814] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 54.917368] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 54.923985] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[ 54.927321] Pending list:
3 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x7] SCB_LUN[0x0]
[ 54.933925] Kernel Free SCB list: 1 0
[ 54.937165] Untagged Q(0): 3
[ 54.940281]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 54.946654] scsi10:0:0:0: Cmd aborted from QINFIFO
[ 54.949978] aic7xxx_abort returns 0x2002
[ 65.828843] scsi 11:0:1:0: tag#0 Attempting to queue an ABORT message:
[ 65.832334] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 65.836410] scsi11: At time of recovery, card was paused
[ 65.840005] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x2d Mode 0x33
[ 65.847478] Card was paused
[ 65.851269] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 65.855207] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 65.859352] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 65.863555] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 65.867822] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 65.872192] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 65.876623] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 65.881185] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 65.885837] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 65.890613] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 65.895460] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 65.900309]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 65.910132] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 65.925259] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 65.940616] Kernel Free SCB list: 2 1 0
[ 65.945701] Sequencer Complete DMA-inprog list:
[ 65.950772] Sequencer Complete list:
[ 65.955763] Sequencer DMA-Up and Complete list:
[ 65.960727] Sequencer On QFreeze and Complete list:
[ 65.965677]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 65.980133] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 65.985079] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 65.990043] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 65.994999] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 65.999966] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 66.014379] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 66.019378] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 66.024443] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 66.029568] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 66.034816] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 66.045463] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 66.050837] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 66.056213] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 66.066906] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 66.072288] CCSCBCTL[0x4]:(CCSCBDIR)
[ 66.077615] scsi11: REG0 == 0xffff, SINDEX = 0x1d, DINDEX = 0x0
[ 66.082954] scsi11: SCBPTR == 0x1ff, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 66.088299] CDB ff 1 0 0 0 0
[ 66.093556] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 66.104162] scsi11:0:1:0: Cmd aborted from QINFIFO
[ 66.109577] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 66.114922] scsi11: Received split completion error message in OVLY
[ 66.120296] scsi11: Count not complete in OVLY
[ 66.125637] scsi11: PCI error Interrupt
[ 66.130921] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 66.141637] Card was paused
[ 66.146932] INTSTAT[0x11]:(SPLTINT|PCIINT) SELOID[0x0] SELID[0x0]
[ 66.152320] HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff]
[ 66.157722] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 66.163101] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 66.168492] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 66.173874] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 66.179234] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0]
[ 66.184520] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
[ 66.189867] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
[ 66.195231] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0]
[ 66.200585] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0]
[ 66.205922] LQOSTAT2[0x0]
[ 66.211153]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 66.221449] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 66.236847] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 66.252066] Kernel Free SCB list: 2 1 0
[ 66.257215] Sequencer Complete DMA-inprog list:
[ 66.262352] Sequencer Complete list:
[ 66.267430] Sequencer DMA-Up and Complete list:
[ 66.272515] Sequencer On QFreeze and Complete list:
[ 66.277613]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 66.292756] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 66.298002] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 66.303359] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 66.308750] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 66.314163] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 66.329877] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 66.335233] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 66.340614] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 66.346026] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 66.351444] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 66.362198] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 66.367528] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 66.372802] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 66.383097] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 66.388291] CCSCBCTL[0x4]:(CCSCBDIR)
[ 66.393470] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 66.398685] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 66.403917] CDB 0 0 0 0 0 0
[ 66.409081] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 66.419495] scsi11: Received a Target Abort in CMC
[ 66.424685] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 66.424688] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 66.424690] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 66.424691] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e40 flags=0x0050]
[ 66.424691] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f00 flags=0x0050]
[ 66.424693] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f80 flags=0x0050]
[ 66.424694] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001880 flags=0x0050]
[ 66.424695] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001840 flags=0x0050]
[ 66.424696] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001900 flags=0x0050]
[ 66.424696] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f40 flags=0x0050]
[ 66.424697] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001980 flags=0x0050]
[ 66.424698] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000018c0 flags=0x0050]
[ 66.424699] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a00 flags=0x0050]
[ 66.424699] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001940 flags=0x0050]
[ 66.424700] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a80 flags=0x0050]
[ 66.424701] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000019c0 flags=0x0050]
[ 66.424702] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b00 flags=0x0050]
[ 66.424702] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a40 flags=0x0050]
[ 66.424703] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b80 flags=0x0050]
[ 66.424704] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001ac0 flags=0x0050]
[ 66.424705] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c00 flags=0x0050]
[ 66.424705] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b40 flags=0x0050]
[ 66.424706] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c80 flags=0x0050]
[ 66.424707] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001bc0 flags=0x0050]
[ 66.424708] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d00 flags=0x0050]
[ 66.424708] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c40 flags=0x0050]
[ 66.424709] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d80 flags=0x0050]
[ 66.424710] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001cc0 flags=0x0050]
[ 66.424710] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e00 flags=0x0050]
[ 66.424711] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d40 flags=0x0050]
[ 66.424712] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e80 flags=0x0050]
[ 66.424713] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001dc0 flags=0x0050]
[ 66.424714] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001ec0 flags=0x0050]
[ 66.424714] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001fc0 flags=0x0050]
[ 66.566753] scsi11: Received split completion error message in OVLY
[ 75.877127] scsi 10:0:1:0: tag#0 Attempting to queue an ABORT message
[ 75.880331] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 75.883614] scsi10: At time of recovery, card was not paused
[ 75.886904] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi10: Dumping Card State while idle, at SEQADDR 0x193
[ 75.893361] Card was paused
[ 75.896483] ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x0
[ 75.899630] HCNT = 0x20 SCBPTR = 0x0
[ 75.902700] SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
[ 75.905825] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
[ 75.909000] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
[ 75.912104] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
[ 75.915199] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 75.918392] SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
[ 75.921533] DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
[ 75.924645] STACK: 0xe 0x0 0x0 0x187
SCB count = 4
[ 75.930608] Kernel NEXTQSCB = 3
[ 75.933540] Card NEXTQSCB = 2
[ 75.936444] QINFIFO entries: 2
[ 75.939332] Waiting Queue entries:
[ 75.942183] Disconnected Queue entries:
[ 75.945011] QOUTFIFO entries:
[ 75.947797] Sequencer Free SCB List: 1 2
[ 75.950574] Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 75.956075] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 75.961701] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 75.967332] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[ 75.970206] Pending list:
2 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x17] SCB_LUN[0x0]
[ 75.976115] Kernel Free SCB list: 1 0
[ 75.979184] Untagged Q(1): 2
[ 75.982271]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 75.988599] scsi10:0:1:0: Cmd aborted from QINFIFO
[ 75.991908] aic7xxx_abort returns 0x2002
[ 86.821436] scsi 11:0:2:0: tag#0 Attempting to queue an ABORT message:
[ 86.824924] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 86.829023] scsi11: At time of recovery, card was paused
[ 86.832618] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x31 Mode 0x11
[ 86.840097] Card was paused
[ 86.843897] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 86.847847] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 86.852006] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 86.856228] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 86.860518] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 86.864919] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 86.869381] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 86.873975] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 86.878661] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 86.883478] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 86.888370] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 86.893263]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 86.903187] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 86.918497] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 86.933857] Kernel Free SCB list: 2 1 0
[ 86.938938] Sequencer Complete DMA-inprog list:
[ 86.944004] Sequencer Complete list:
[ 86.948996] Sequencer DMA-Up and Complete list:
[ 86.953961] Sequencer On QFreeze and Complete list:
[ 86.958911]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 86.973364] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 86.978308] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 86.983269] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 86.988223] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 86.993189] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 87.007605] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 87.012605] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 87.017670] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 87.022791] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 87.028038] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 87.038680] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 87.044047] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 87.049420] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 87.060104] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 87.065483] CCSCBCTL[0x4]:(CCSCBDIR)
[ 87.070805] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 87.076133] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 87.081462] CDB 0 0 0 0 0 0
[ 87.086704] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 87.097268] scsi11:0:2:0: Cmd aborted from QINFIFO
[ 87.103675] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 87.103677] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 87.114504] scsi11: Received split completion error message in OVLY
[ 87.114511] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 87.114512] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002700 flags=0x0050]
[ 87.114513] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002100 flags=0x0050]
[ 87.114514] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002780 flags=0x0050]
[ 87.114514] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002140 flags=0x0050]
[ 87.114515] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002180 flags=0x0050]
[ 87.114516] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000027c0 flags=0x0050]
[ 87.114517] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000021c0 flags=0x0050]
[ 87.114517] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002240 flags=0x0050]
[ 87.114518] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002200 flags=0x0050]
[ 87.114519] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000022c0 flags=0x0050]
[ 87.114519] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002280 flags=0x0050]
[ 87.114520] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002340 flags=0x0050]
[ 87.114521] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002300 flags=0x0050]
[ 87.114522] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000023c0 flags=0x0050]
[ 87.114522] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002380 flags=0x0050]
[ 87.114523] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002440 flags=0x0050]
[ 87.114524] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002400 flags=0x0050]
[ 87.114525] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000024c0 flags=0x0050]
[ 87.114525] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002480 flags=0x0050]
[ 87.114526] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002540 flags=0x0050]
[ 87.114527] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002500 flags=0x0050]
[ 87.114528] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000025c0 flags=0x0050]
[ 87.114528] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002580 flags=0x0050]
[ 87.114529] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002640 flags=0x0050]
[ 87.114530] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002600 flags=0x0050]
[ 87.114531] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000026c0 flags=0x0050]
[ 87.114531] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002680 flags=0x0050]
[ 87.114532] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002740 flags=0x0050]
[ 87.249586] scsi11: Count not complete in OVLY
[ 87.253069] scsi11: PCI error Interrupt
[ 87.256544] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x31 Mode 0x11
[ 87.263699] Card was paused
[ 87.267317] INTSTAT[0x11]:(SPLTINT|PCIINT) SELOID[0x0] SELID[0x0]
[ 87.271039] HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff]
[ 87.274737] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 87.278378] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 87.282001] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 87.285594] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 87.289197] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0]
[ 87.292779] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
[ 87.296445] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
[ 87.300066] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0]
[ 87.303652] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0]
[ 87.307216] LQOSTAT2[0x0]
[ 87.310670]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 87.317428] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 87.327335] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 87.337117] Kernel Free SCB list: 2 1 0
[ 87.340382] Sequencer Complete DMA-inprog list:
[ 87.343629] Sequencer Complete list:
[ 87.346804] Sequencer DMA-Up and Complete list:
[ 87.349986] Sequencer On QFreeze and Complete list:
[ 87.353149]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 87.362167] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 87.365193] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 87.368177] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 87.371244] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 87.374465] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 87.384275] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 87.384450] SEQINTSRC[0x0]
[ 87.384450]
[ 87.384454] DFCNTRL[0x0]
[ 87.384454]
[ 87.384456] DFSTATUS[0x89]
[ 87.384456] :(FIFOEMP
[ 87.384456] |HDONE
[ 87.384457] |PRELOAD_AVAIL
[ 87.384457] )
[ 87.384460] SG_CACHE_SHADOW[0x2]
[ 87.384460] :(LAST_SEG
[ 87.384460] )
[ 87.384463] SG_STATE[0x0]
[ 87.384464]
[ 87.384466] DFFSXFRCTL[0x0]
[ 87.384467]
[ 87.384469] SOFFCNT[0x0]
[ 87.384470]
[ 87.384472] MDFFSTAT[0x5]
[ 87.384473] :(FIFOFREE
[ 87.384473] |DLZERO
[ 87.384473] )
[ 87.384501] SHADDR = 0x00, SHCNT = 0x0
[ 87.384529] HADDR = 0x00, HCNT = 0x0
[ 87.384531] CCSGCTL[0x10]
[ 87.384532] :(SG_CACHE_AVAIL
[ 87.384532] )
[ 87.384532]
LQIN:
[ 87.384535] 0x0
[ 87.384538] 0x0
[ 87.384541] 0x0
[ 87.384544] 0x0
[ 87.384547] 0x0
[ 87.384550] 0x0
[ 87.384553] 0x0
[ 87.384556] 0x0
[ 87.384559] 0x0
[ 87.384562] 0x0
[ 87.384565] 0x0
[ 87.384568] 0x0
[ 87.384571] 0x0
[ 87.384574] 0x0
[ 87.384577] 0x0
[ 87.384580] 0x0
[ 87.384583] 0x0
[ 87.384586] 0x0
[ 87.384589] 0x0
[ 87.384592] 0x0
[ 87.384600] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 87.384606] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 87.384611] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 87.384614] SIMODE0[0x6c]
[ 87.384614] :(ENOVERRUN
[ 87.384614] |ENIOERR
[ 87.384615] |ENSELDI
[ 87.384615] |ENSELDO
[ 87.384615] )
[ 87.384618] CCSCBCTL[0x4]
[ 87.384619] :(CCSCBDIR
[ 87.384619] )
[ 87.384635] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 87.384650] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 87.384666] CDB 0 0 0 0 0 0
[ 87.384666] STACK:
[ 87.384672] 0x1f
[ 87.384677] 0x0
[ 87.384682] 0x0
[ 87.384687] 0x0
[ 87.384693] 0x0
[ 87.384698] 0x0
[ 87.384703] 0x0
[ 87.384708] 0x0
[ 87.384711]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 87.384735] scsi11: Received a Target Abort in CMC
[ 87.384753] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 87.384794] scsi11: Received split completion error message in OVLY
[ 96.869720] scsi 10:0:2:0: tag#0 Attempting to queue an ABORT message
[ 96.875113] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 96.880576] scsi10: At time of recovery, card was not paused
[ 96.885954] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi10: Dumping Card State while idle, at SEQADDR 0x193
[ 96.896806] Card was paused
[ 96.902166] ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x0
[ 96.907571] HCNT = 0x20 SCBPTR = 0x0
[ 96.912921] SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
[ 96.918319] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
[ 96.923731] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
[ 96.929142] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
[ 96.934588] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 96.940158] SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
[ 96.945693] DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
[ 96.951190] STACK: 0xe 0x0 0x0 0x187
SCB count = 4
[ 96.961948] Kernel NEXTQSCB = 2
[ 96.967258] Card NEXTQSCB = 3
[ 96.972523] QINFIFO entries: 3
[ 96.977807] Waiting Queue entries:
[ 96.983045] Disconnected Queue entries:
[ 96.988238] QOUTFIFO entries:
[ 96.993404] Sequencer Free SCB List: 1 2
[ 96.998613] Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 97.009046] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 97.019639] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 97.030415] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[ 97.035884] Pending list:
3 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x27] SCB_LUN[0x0]
[ 97.046836] Kernel Free SCB list: 1 0
[ 97.052401] Untagged Q(2): 3
[ 97.057933]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 97.068775] scsi10:0:2:0: Cmd aborted from QINFIFO
[ 97.074177] aic7xxx_abort returns 0x2002
[ 107.846030] scsi 11:0:3:0: tag#0 Attempting to queue an ABORT message:
[ 107.851400] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 107.857280] scsi11: At time of recovery, card was paused
[ 107.862628] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x1e Mode 0x33
[ 107.872946] Card was paused
[ 107.877945] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 107.882997] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 107.888166] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 107.893288] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 107.898364] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 107.903490] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 107.908640] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 107.913869] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 107.919119] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 107.924432] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 107.929757] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 107.935017]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 107.945477] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 107.961046] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 107.976378] Kernel Free SCB list: 2 1 0
[ 107.981471] Sequencer Complete DMA-inprog list:
[ 107.986548] Sequencer Complete list:
[ 107.991547] Sequencer DMA-Up and Complete list:
[ 107.996518] Sequencer On QFreeze and Complete list:
[ 108.001472]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 108.015958] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 108.020914] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 108.025887] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 108.030852] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 108.035826] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 108.050262] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 108.055269] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 108.060341] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 108.065475] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 108.070729] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 108.081390] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 108.086768] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 108.092148] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 108.102846] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 108.108234] CCSCBCTL[0x4]:(CCSCBDIR)
[ 108.113563] scsi11: REG0 == 0xffff, SINDEX = 0x1d, DINDEX = 0x0
[ 108.118907] scsi11: SCBPTR == 0x1ff, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 108.124254] CDB ff 1 0 0 0 0
[ 108.129516] STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 108.140104] scsi11:0:3:0: Cmd aborted from QINFIFO
[ 108.145503] AMD-Vi: Event logged [
[ 108.145506] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 108.145544] scsi11: Received split completion error message in OVLY
[ 108.145545] scsi11: Count not complete in OVLY
[ 108.145549] scsi11: PCI error Interrupt
[ 108.145557] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 108.145557] Card was paused
[ 108.145560] INTSTAT[0x11]
[ 108.145560] :(SPLTINT
[ 108.145560] |PCIINT
[ 108.145561] )
[ 108.145564] SELOID[0x0]
[ 108.145564]
[ 108.145566] SELID[0x0]
[ 108.145566]
[ 108.145569] HS_MAILBOX[0x0]
[ 108.145569]
[ 108.145572] INTCTL[0x0]
[ 108.145572]
[ 108.145574] SEQINTSTAT[0x0]
[ 108.145575]
[ 108.145578] SAVED_MODE[0xff]
[ 108.145578]
[ 108.145581] DFFSTAT[0x33]
[ 108.145581] :(CURRFIFO_NONE
[ 108.145581] |FIFO0FREE
[ 108.145582] |FIFO1FREE
[ 108.145582] )
[ 108.145585] SCSISIGI[0x0]
[ 108.145585] :(P_DATAOUT
[ 108.145585] )
[ 108.145588] SCSIPHASE[0x0]
[ 108.145589]
[ 108.145591] SCSIBUS[0x0]
[ 108.145591]
[ 108.145594] LASTPHASE[0x1]
[ 108.145595] :(P_DATAOUT
[ 108.145595] |P_BUSFREE
[ 108.145595] )
[ 108.145598] SCSISEQ0[0x0]
[ 108.145598]
[ 108.145601] SCSISEQ1[0x12]
[ 108.145601] :(ENAUTOATNP
[ 108.145602] |ENRSELI
[ 108.145602] )
[ 108.145605] SEQCTL0[0x0]
[ 108.145605]
[ 108.145608] SEQINTCTL[0x0]
[ 108.145608]
[ 108.145611] SEQ_FLAGS[0x0]
[ 108.145611]
[ 108.145614] SEQ_FLAGS2[0x0]
[ 108.145614]
[ 108.145619] QFREEZE_COUNT[0x0]
[ 108.145619]
[ 108.145624] KERNEL_QFREEZE_COUNT[0x0]
[ 108.145624]
[ 108.145630] MK_MESSAGE_SCB[0xff00]
[ 108.145630]
[ 108.145633] MK_MESSAGE_SCSIID[0xff]
[ 108.145633]
[ 108.145636] SSTAT0[0x0]
[ 108.145636]
[ 108.145639] SSTAT1[0x0]
[ 108.145639]
[ 108.145642] SSTAT2[0x0]
[ 108.145642]
[ 108.145645] SSTAT3[0x0]
[ 108.145646]
[ 108.145649] PERRDIAG[0x0]
[ 108.145649]
[ 108.145652] SIMODE1[0xa4]
[ 108.145652] :(ENSCSIPERR
[ 108.145652] |ENSCSIRST
[ 108.145653] |ENSELTIMO
[ 108.145653] )
[ 108.145655] LQISTAT0[0x0]
[ 108.145656]
[ 108.145659] LQISTAT1[0x0]
[ 108.145659]
[ 108.145661] LQISTAT2[0x0]
[ 108.145662]
[ 108.145665] LQOSTAT0[0x0]
[ 108.145665]
[ 108.145668] LQOSTAT1[0x0]
[ 108.145668]
[ 108.145671] LQOSTAT2[0x0]
[ 108.145671]
[ 108.145692]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 108.145706] qinstart = 0 qinfifonext = 1
QINFIFO:
[ 108.145706] 0x3
[ 108.145708]
WAITING_TID_QUEUES:
[ 108.145728] Pending list:
[ 108.145731]
3 FIFO_USE[0x0]
[ 108.145735] SCB_CONTROL[0x0]
[ 108.145735]
[ 108.145738] SCB_SCSIID[0x0]
[ 108.145738]
[ 108.145738]
Total 1
[ 108.145738] Kernel Free SCB list:
[ 108.145739] 2
[ 108.145739] 1
[ 108.145739] 0
[ 108.145739] Sequencer Complete DMA-inprog list:
[ 108.145745] Sequencer Complete list:
[ 108.145750] Sequencer DMA-Up and Complete list:
[ 108.145755] Sequencer On QFreeze and Complete list:
[ 108.145775]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 108.145777] SEQIMODE[0x3f]
[ 108.145778] :(ENCFG4TCMD
[ 108.145778] |ENCFG4ICMD
[ 108.145778] |ENCFG4TSTAT
[ 108.145778] |ENCFG4ISTAT
[ 108.145779] |ENCFG4DATA
[ 108.145779] |ENSAVEPTRS
[ 108.145779] )
[ 108.145782] SEQINTSRC[0x0]
[ 108.145782]
[ 108.145785] DFCNTRL[0x0]
[ 108.145785]
[ 108.145788] DFSTATUS[0x89]
[ 108.145788] :(FIFOEMP
[ 108.145788] |HDONE
[ 108.145788] |PRELOAD_AVAIL
[ 108.145789] )
[ 108.145792] SG_CACHE_SHADOW[0x2]
[ 108.145792] :(LAST_SEG
[ 108.145792] )
[ 108.145795] SG_STATE[0x0]
[ 108.145795]
[ 108.145798] DFFSXFRCTL[0x0]
[ 108.145798]
[ 108.145801] SOFFCNT[0x0]
[ 108.145801]
[ 108.145804] MDFFSTAT[0x5]
[ 108.145804] :(FIFOFREE
[ 108.145805] |DLZERO
[ 108.145805] )
[ 108.145833] SHADDR = 0x00, SHCNT = 0x0
[ 108.145861] HADDR = 0x00, HCNT = 0x0
[ 108.145864] CCSGCTL[0x10]
[ 108.145864] :(SG_CACHE_AVAIL
[ 108.145864] )
[ 108.145876]
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 108.145879] SEQIMODE[0x3f]
[ 108.145879] :(ENCFG4TCMD
[ 108.145879] |ENCFG4ICMD
[ 108.145880] |ENCFG4TSTAT
[ 108.145880] |ENCFG4ISTAT
[ 108.145880] |ENCFG4DATA
[ 108.145880] |ENSAVEPTRS
[ 108.145880] )
[ 108.145884] SEQINTSRC[0x0]
[ 108.145884]
[ 108.145887] DFCNTRL[0x0]
[ 108.145887]
[ 108.145890] DFSTATUS[0x89]
[ 108.145890] :(FIFOEMP
[ 108.145890] |HDONE
[ 108.145891] |PRELOAD_AVAIL
[ 108.145891] )
[ 108.145894] SG_CACHE_SHADOW[0x2]
[ 108.145894] :(LAST_SEG
[ 108.145894] )
[ 108.145897] SG_STATE[0x0]
[ 108.145898]
[ 108.145900] DFFSXFRCTL[0x0]
[ 108.145901]
[ 108.145904] SOFFCNT[0x0]
[ 108.145904]
[ 108.145906] MDFFSTAT[0x5]
[ 108.145907] :(FIFOFREE
[ 108.145907] |DLZERO
[ 108.145907] )
[ 108.145935] SHADDR = 0x00, SHCNT = 0x0
[ 108.145963] HADDR = 0x00, HCNT = 0x0
[ 108.145965] CCSGCTL[0x10]
[ 108.145966] :(SG_CACHE_AVAIL
[ 108.145966] )
[ 108.145966]
LQIN:
[ 108.145969] 0x0
[ 108.145972] 0x0
[ 108.145975] 0x0
[ 108.145978] 0x0
[ 108.145981] 0x0
[ 108.145984] 0x0
[ 108.145987] 0x0
[ 108.145990] 0x0
[ 108.145993] 0x0
[ 108.145996] 0x0
[ 108.145999] 0x0
[ 108.146002] 0x0
[ 108.146005] 0x0
[ 108.146008] 0x0
[ 108.146011] 0x0
[ 108.146014] 0x0
[ 108.146017] 0x0
[ 108.146020] 0x0
[ 108.146023] 0x0
[ 108.146026] 0x0
[ 108.146034] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 108.146040] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 108.146045] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 108.146048] SIMODE0[0x6c]
[ 108.146048] :(ENOVERRUN
[ 108.146048] |ENIOERR
[ 108.146049] |ENSELDI
[ 108.146049] |ENSELDO
[ 108.146049] )
[ 108.146052] CCSCBCTL[0x4]
[ 108.146053] :(CCSCBDIR
[ 108.146053] )
[ 108.146069] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 108.146084] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 108.146100] CDB 0 0 0 0 0 0
[ 108.146100] STACK:
[ 108.146105] 0x1f
[ 108.146110] 0x0
[ 108.146116] 0x0
[ 108.146121] 0x0
[ 108.146127] 0x0
[ 108.146132] 0x0
[ 108.146137] 0x0
[ 108.146142] 0x0
[ 108.146145]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 108.146169] scsi11: Received a Target Abort in CMC
[ 108.146187] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 108.146224] scsi11: Received split completion error message in OVLY
[ 108.468729] IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 108.478831] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 108.484025] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e80 flags=0x0050]
[ 108.489160] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001ec0 flags=0x0050]
[ 108.494264] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f00 flags=0x0050]
[ 108.499290] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f80 flags=0x0050]
[ 108.504237] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f40 flags=0x0050]
[ 108.509111] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001840 flags=0x0050]
[ 108.513914] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001880 flags=0x0050]
[ 108.518634] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000018c0 flags=0x0050]
[ 108.523269] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001900 flags=0x0050]
[ 108.527838] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001980 flags=0x0050]
[ 108.532337] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001940 flags=0x0050]
[ 108.536757] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000019c0 flags=0x0050]
[ 108.541095] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a00 flags=0x0050]
[ 108.545339] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a40 flags=0x0050]
[ 108.549484] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a80 flags=0x0050]
[ 108.553544] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001ac0 flags=0x0050]
[ 108.557526] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b00 flags=0x0050]
[ 108.561451] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b40 flags=0x0050]
[ 108.565363] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b80 flags=0x0050]
[ 108.569197] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001bc0 flags=0x0050]
[ 108.572943] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c00 flags=0x0050]
[ 108.576664] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c40 flags=0x0050]
[ 108.580364] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c80 flags=0x0050]
[ 108.584039] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001cc0 flags=0x0050]
[ 108.587648] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d00 flags=0x0050]
[ 108.591192] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d40 flags=0x0050]
[ 108.594713] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d80 flags=0x0050]
[ 108.598193] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001dc0 flags=0x0050]
[ 108.601654] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e00 flags=0x0050]
[ 108.605088] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e40 flags=0x0050]
[ 108.608485] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001fc0 flags=0x0050]
[ 117.862314] scsi 10:0:3:0: tag#0 Attempting to queue an ABORT message
[ 117.865766] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 117.869230] scsi10: At time of recovery, card was not paused
[ 117.872633] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi10: Dumping Card State while idle, at SEQADDR 0x193
[ 117.879359] Card was paused
[ 117.882632] ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x0
[ 117.885938] HCNT = 0x20 SCBPTR = 0x0
[ 117.889193] SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
[ 117.892533] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
[ 117.895855] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
[ 117.899134] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
[ 117.902424] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 117.905822] SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
[ 117.909178] DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
[ 117.912494] STACK: 0xe 0x0 0x0 0x187
SCB count = 4
[ 117.918896] Kernel NEXTQSCB = 3
[ 117.922093] Card NEXTQSCB = 2
[ 117.925257] QINFIFO entries: 2
[ 117.928391] Waiting Queue entries:
[ 117.931495] Disconnected Queue entries:
[ 117.934580] QOUTFIFO entries:
[ 117.937620] Sequencer Free SCB List: 1 2
[ 117.940646] Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 117.946690] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 117.952840] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 117.959064] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[ 117.962134] Pending list:
2 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x37] SCB_LUN[0x0]
[ 117.968142] Kernel Free SCB list: 1 0
[ 117.971254] Untagged Q(3): 2
[ 117.974382]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 117.980776] scsi10:0:3:0: Cmd aborted from QINFIFO
[ 117.984113] aic7xxx_abort returns 0x2002
[ 128.870624] scsi 11:0:4:0: tag#0 Attempting to queue an ABORT message:
[ 128.874129] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 128.878217] scsi11: At time of recovery, card was paused
[ 128.881826] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x2e Mode 0x0
[ 128.889327] Card was paused
[ 128.893127] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 128.897075] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 128.901230] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 128.905448] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 128.909730] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 128.914118] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 128.918567] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 128.923144] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 128.927808] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 128.932598] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 128.937460] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 128.942323]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 128.952171] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 128.967335] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 128.982736] Kernel Free SCB list: 2 1 0
[ 128.987833] Sequencer Complete DMA-inprog list:
[ 128.992915] Sequencer Complete list:
[ 128.997920] Sequencer DMA-Up and Complete list:
[ 129.002897] Sequencer On QFreeze and Complete list:
[ 129.007864]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 129.022376] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 129.027341] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 129.032324] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 129.037297] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 129.042280] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 129.056751] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 129.061766] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 129.066849] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 129.071989] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 129.077252] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 129.087929] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 129.093318] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 129.098713] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 129.109440] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 129.114839] CCSCBCTL[0x4]:(CCSCBDIR)
[ 129.120180] scsi11: REG0 == 0x68ee, SINDEX = 0x1d, DINDEX = 0x0
[ 129.125534] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 129.130883] CDB 0 0 0 0 0 0
[ 129.136142] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 129.146743] scsi11:0:4:0: Cmd aborted from QINFIFO
[ 129.152147] AMD-Vi: Event logged [
[ 129.152149] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 129.152185] scsi11: Received split completion error message in OVLY
[ 129.152186] scsi11: Count not complete in OVLY
[ 129.152190] scsi11: PCI error Interrupt
[ 129.152198] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 129.152199] Card was paused
[ 129.152201] INTSTAT[0x11]
[ 129.152201] :(SPLTINT
[ 129.152202] |PCIINT
[ 129.152202] )
[ 129.152205] SELOID[0x0]
[ 129.152206]
[ 129.152209] SELID[0x0]
[ 129.152209]
[ 129.152212] HS_MAILBOX[0x0]
[ 129.152213]
[ 129.152216] INTCTL[0x0]
[ 129.152216]
[ 129.152219] SEQINTSTAT[0x0]
[ 129.152219]
[ 129.152222] SAVED_MODE[0xff]
[ 129.152222]
[ 129.152225] DFFSTAT[0x33]
[ 129.152225] :(CURRFIFO_NONE
[ 129.152226] |FIFO0FREE
[ 129.152226] |FIFO1FREE
[ 129.152226] )
[ 129.152229] SCSISIGI[0x0]
[ 129.152229] :(P_DATAOUT
[ 129.152229] )
[ 129.152233] SCSIPHASE[0x0]
[ 129.152233]
[ 129.152236] SCSIBUS[0x0]
[ 129.152236]
[ 129.152239] LASTPHASE[0x1]
[ 129.152240] :(P_DATAOUT
[ 129.152240] |P_BUSFREE
[ 129.152240] )
[ 129.152243] SCSISEQ0[0x0]
[ 129.152243]
[ 129.152246] SCSISEQ1[0x12]
[ 129.152246] :(ENAUTOATNP
[ 129.152246] |ENRSELI
[ 129.152247] )
[ 129.152250] SEQCTL0[0x0]
[ 129.152250]
[ 129.152253] SEQINTCTL[0x0]
[ 129.152253]
[ 129.152256] SEQ_FLAGS[0x0]
[ 129.152256]
[ 129.152259] SEQ_FLAGS2[0x0]
[ 129.152259]
[ 129.152264] QFREEZE_COUNT[0x0]
[ 129.152264]
[ 129.152269] KERNEL_QFREEZE_COUNT[0x0]
[ 129.152269]
[ 129.152274] MK_MESSAGE_SCB[0xff00]
[ 129.152275]
[ 129.152277] MK_MESSAGE_SCSIID[0xff]
[ 129.152277]
[ 129.152280] SSTAT0[0x0]
[ 129.152281]
[ 129.152283] SSTAT1[0x0]
[ 129.152283]
[ 129.152286] SSTAT2[0x0]
[ 129.152286]
[ 129.152289] SSTAT3[0x0]
[ 129.152289]
[ 129.152292] PERRDIAG[0x0]
[ 129.152292]
[ 129.152295] SIMODE1[0xa4]
[ 129.152296] :(ENSCSIPERR
[ 129.152296] |ENSCSIRST
[ 129.152296] |ENSELTIMO
[ 129.152296] )
[ 129.152299] LQISTAT0[0x0]
[ 129.152299]
[ 129.152302] LQISTAT1[0x0]
[ 129.152302]
[ 129.152305] LQISTAT2[0x0]
[ 129.152305]
[ 129.152308] LQOSTAT0[0x0]
[ 129.152308]
[ 129.152311] LQOSTAT1[0x0]
[ 129.152311]
[ 129.152314] LQOSTAT2[0x0]
[ 129.152314]
[ 129.152335]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 129.152349] qinstart = 0 qinfifonext = 1
QINFIFO:
[ 129.152350] 0x3
[ 129.152351]
WAITING_TID_QUEUES:
[ 129.152371] Pending list:
[ 129.152374]
3 FIFO_USE[0x0]
[ 129.152377] SCB_CONTROL[0x0]
[ 129.152377]
[ 129.152380] SCB_SCSIID[0x0]
[ 129.152380]
[ 129.152381]
Total 1
[ 129.152381] Kernel Free SCB list:
[ 129.152381] 2
[ 129.152381] 1
[ 129.152382] 0
[ 129.152382] Sequencer Complete DMA-inprog list:
[ 129.152387] Sequencer Complete list:
[ 129.152393] Sequencer DMA-Up and Complete list:
[ 129.152398] Sequencer On QFreeze and Complete list:
[ 129.152417]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 129.152420] SEQIMODE[0x3f]
[ 129.152420] :(ENCFG4TCMD
[ 129.152421] |ENCFG4ICMD
[ 129.152421] |ENCFG4TSTAT
[ 129.152421] |ENCFG4ISTAT
[ 129.152421] |ENCFG4DATA
[ 129.152421] |ENSAVEPTRS
[ 129.152422] )
[ 129.152425] SEQINTSRC[0x0]
[ 129.152425]
[ 129.152427] DFCNTRL[0x0]
[ 129.152428]
[ 129.152430] DFSTATUS[0x89]
[ 129.152431] :(FIFOEMP
[ 129.152431] |HDONE
[ 129.152431] |PRELOAD_AVAIL
[ 129.152431] )
[ 129.152434] SG_CACHE_SHADOW[0x2]
[ 129.152435] :(LAST_SEG
[ 129.152435] )
[ 129.152438] SG_STATE[0x0]
[ 129.152438]
[ 129.152441] DFFSXFRCTL[0x0]
[ 129.152441]
[ 129.152444] SOFFCNT[0x0]
[ 129.152444]
[ 129.152447] MDFFSTAT[0x5]
[ 129.152447] :(FIFOFREE
[ 129.152447] |DLZERO
[ 129.152447] )
[ 129.152475] SHADDR = 0x00, SHCNT = 0x0
[ 129.152504] HADDR = 0x00, HCNT = 0x0
[ 129.152507] CCSGCTL[0x10]
[ 129.152507] :(SG_CACHE_AVAIL
[ 129.152507] )
[ 129.152518]
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 129.152521] SEQIMODE[0x3f]
[ 129.152521] :(ENCFG4TCMD
[ 129.152521] |ENCFG4ICMD
[ 129.152521] |ENCFG4TSTAT
[ 129.152522] |ENCFG4ISTAT
[ 129.152522] |ENCFG4DATA
[ 129.152522] |ENSAVEPTRS
[ 129.152522] )
[ 129.152525] SEQINTSRC[0x0]
[ 129.152526]
[ 129.152528] DFCNTRL[0x0]
[ 129.152528]
[ 129.152531] DFSTATUS[0x89]
[ 129.152532] :(FIFOEMP
[ 129.152532] |HDONE
[ 129.152532] |PRELOAD_AVAIL
[ 129.152532] )
[ 129.152535] SG_CACHE_SHADOW[0x2]
[ 129.152535] :(LAST_SEG
[ 129.152536] )
[ 129.152539] SG_STATE[0x0]
[ 129.152539]
[ 129.152542] DFFSXFRCTL[0x0]
[ 129.152542]
[ 129.152545] SOFFCNT[0x0]
[ 129.152545]
[ 129.152548] MDFFSTAT[0x5]
[ 129.152548] :(FIFOFREE
[ 129.152548] |DLZERO
[ 129.152548] )
[ 129.152576] SHADDR = 0x00, SHCNT = 0x0
[ 129.152604] HADDR = 0x00, HCNT = 0x0
[ 129.152607] CCSGCTL[0x10]
[ 129.152607] :(SG_CACHE_AVAIL
[ 129.152607] )
[ 129.152607]
LQIN:
[ 129.152610] 0x0
[ 129.152613] 0x0
[ 129.152616] 0x0
[ 129.152619] 0x0
[ 129.152622] 0x0
[ 129.152625] 0x0
[ 129.152628] 0x0
[ 129.152631] 0x0
[ 129.152634] 0x0
[ 129.152637] 0x0
[ 129.152640] 0x0
[ 129.152643] 0x0
[ 129.152646] 0x0
[ 129.152649] 0x0
[ 129.152652] 0x0
[ 129.152655] 0x0
[ 129.152658] 0x0
[ 129.152661] 0x0
[ 129.152664] 0x0
[ 129.152667] 0x0
[ 129.152676] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 129.152682] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 129.152687] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 129.152690] SIMODE0[0x6c]
[ 129.152690] :(ENOVERRUN
[ 129.152690] |ENIOERR
[ 129.152691] |ENSELDI
[ 129.152691] |ENSELDO
[ 129.152691] )
[ 129.152694] CCSCBCTL[0x4]
[ 129.152695] :(CCSCBDIR
[ 129.152695] )
[ 129.152711] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 129.152726] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 129.152742] CDB 0 0 0 0 0 0
[ 129.152742] STACK:
[ 129.152748] 0x1f
[ 129.152752] 0x0
[ 129.152758] 0x0
[ 129.152763] 0x0
[ 129.152768] 0x0
[ 129.152773] 0x0
[ 129.152778] 0x0
[ 129.152784] 0x0
[ 129.152787]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 129.152810] scsi11: Received a Target Abort in CMC
[ 129.152828] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 129.152865] scsi11: Received split completion error message in OVLY
[ 129.152866] scsi11: Count not complete in OVLY
[ 129.480862] IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 129.490806] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 138.854907] scsi 10:0:4:0: tag#0 Attempting to queue an ABORT message
[ 138.860137] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 138.865345] scsi10: At time of recovery, card was not paused
[ 138.870527] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi10: Dumping Card State while idle, at SEQADDR 0x193
[ 138.880924] Card was paused
[ 138.886056] ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x0
[ 138.891227] HCNT = 0x20 SCBPTR = 0x0
[ 138.896350] SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
[ 138.901539] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
[ 138.906755] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
[ 138.911959] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
[ 138.917176] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 138.922498] SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
[ 138.927785] DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
[ 138.933055] STACK: 0xe 0x0 0x0 0x187
SCB count = 4
[ 138.943525] Kernel NEXTQSCB = 2
[ 138.948737] Card NEXTQSCB = 3
[ 138.953877] QINFIFO entries: 3
[ 138.959026] Waiting Queue entries:
[ 138.964185] Disconnected Queue entries:
[ 138.969365] QOUTFIFO entries:
[ 138.974500] Sequencer Free SCB List: 1 2
[ 138.979629] Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 138.989943] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 139.000554] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 139.011360] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[ 139.016874] Pending list:
3 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x47] SCB_LUN[0x0]
[ 139.027830] Kernel Free SCB list: 1 0
[ 139.033246] Untagged Q(4): 3
[ 139.038579]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 139.049104] scsi10:0:4:0: Cmd aborted from QINFIFO
[ 139.054392] aic7xxx_abort returns 0x2002
[ 149.863211] scsi 11:0:5:0: tag#0 Attempting to queue an ABORT message:
[ 149.868489] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 149.874276] scsi11: At time of recovery, card was paused
[ 149.879460] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x31 Mode 0x11
[ 149.889829] Card was paused
[ 149.894918] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 149.900046] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 149.905327] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 149.910629] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 149.915947] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 149.921306] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 149.926663] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 149.932088] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 149.937534] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 149.943035] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 149.948569] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 149.954026]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 149.964846] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 149.981013] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 149.996599] Kernel Free SCB list: 2 1 0
[ 150.001712] Sequencer Complete DMA-inprog list:
[ 150.006817] Sequencer Complete list:
[ 150.011842] Sequencer DMA-Up and Complete list:
[ 150.016839] Sequencer On QFreeze and Complete list:
[ 150.021824]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 150.036388] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 150.041366] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 150.046363] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 150.051349] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 150.056346] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 150.070840] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 150.075864] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 150.080955] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 150.086105] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 150.091375] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 150.102066] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 150.107459] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 150.112854] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 150.123583] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 150.128983] CCSCBCTL[0x4]:(CCSCBDIR)
[ 150.134321] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 150.139664] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 150.145007] CDB 0 0 0 0 0 0
[ 150.150261] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 150.160853] scsi11:0:5:0: Cmd aborted from QINFIFO
[ 150.166262] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 150.166266] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 150.177105] scsi11: Received split completion error message in OVLY
[ 150.177120] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 150.188262] scsi11: Count not complete in OVLY
[ 150.193892] scsi11: PCI error Interrupt
[ 150.199466] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 150.210731] Card was paused
[ 150.216306] INTSTAT[0x11]:(SPLTINT|PCIINT) SELOID[0x0] SELID[0x0]
[ 150.221954] HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff]
[ 150.227626] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 150.233284] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 150.238894] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 150.244435] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 150.250011] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x0]
[ 150.255569] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
[ 150.261172] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
[ 150.266775] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0]
[ 150.272354] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0]
[ 150.277910] LQOSTAT2[0x0]
[ 150.283358]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 150.294271] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 150.310522] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 150.326799] Kernel Free SCB list: 2 1 0
[ 150.332244] Sequencer Complete DMA-inprog list:
[ 150.337696] Sequencer Complete list:
[ 150.343102] Sequencer DMA-Up and Complete list:
[ 150.348541] Sequencer On QFreeze and Complete list:
[ 150.354002]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 150.370204] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 150.375825] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 150.381426] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 150.386992] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 150.392604] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 150.409015] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 150.414660] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 150.420271] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 150.425849] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 150.431471] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 150.442676] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 150.448227] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 150.453721] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 150.464608] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 150.470141] CCSCBCTL[0x4]:(CCSCBDIR)
[ 150.475629] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 150.481144] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 150.486683] CDB 0 0 0 0 0 0
[ 150.492148] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 150.503180] scsi11: Received a Target Abort in CMC
[ 150.508696] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 150.514222] scsi11: Received split completion error message in OVLY
[ 150.519739] scsi11: Count not complete in OVLY
[ 159.847495] scsi 10:0:5:0: tag#0 Attempting to queue an ABORT message
[ 159.852871] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 159.858173] scsi10: At time of recovery, card was not paused
[ 159.863392] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi10: Dumping Card State while idle, at SEQADDR 0x193
[ 159.873930] Card was paused
[ 159.879132] ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x0
[ 159.884374] HCNT = 0x20 SCBPTR = 0x0
[ 159.889563] SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
[ 159.894799] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
[ 159.900051] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
[ 159.905300] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
[ 159.910588] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 159.915997] SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
[ 159.921370] DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
[ 159.926708] STACK: 0xe 0x0 0x0 0x187
SCB count = 4
[ 159.937148] Kernel NEXTQSCB = 3
[ 159.942303] Card NEXTQSCB = 2
[ 159.947416] QINFIFO entries: 2
[ 159.952545] Waiting Queue entries:
[ 159.957632] Disconnected Queue entries:
[ 159.962669] QOUTFIFO entries:
[ 159.967679] Sequencer Free SCB List: 1 2
[ 159.972728] Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 159.982846] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 159.993126] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 160.003595] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[ 160.008911] Pending list:
2 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x57] SCB_LUN[0x0]
[ 160.019560] Kernel Free SCB list: 1 0
[ 160.024976] Untagged Q(5): 2
[ 160.030359]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 160.040903] scsi10:0:5:0: Cmd aborted from QINFIFO
[ 160.046154] aic7xxx_abort returns 0x2002
[ 170.855804] scsi 11:0:6:0: tag#0 Attempting to queue an ABORT message:
[ 170.861016] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 170.866740] scsi11: At time of recovery, card was paused
[ 170.871934] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x31 Mode 0x11
[ 170.882209] Card was paused
[ 170.887238] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 170.892317] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 170.897509] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 170.902653] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 170.907765] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 170.912922] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 170.918099] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 170.923352] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 170.928620] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 170.933946] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 170.939282] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 170.944548]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 170.955009] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 170.970598] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 170.985975] Kernel Free SCB list: 2 1 0
[ 170.991093] Sequencer Complete DMA-inprog list:
[ 170.996200] Sequencer Complete list:
[ 171.001228] Sequencer DMA-Up and Complete list:
[ 171.006231] Sequencer On QFreeze and Complete list:
[ 171.011220]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 171.025802] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 171.030787] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 171.035791] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 171.040784] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 171.045787] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 171.060300] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 171.065329] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 171.070424] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 171.075575] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 171.080849] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 171.091547] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 171.096945] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 171.102350] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 171.113099] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 171.118509] CCSCBCTL[0x4]:(CCSCBDIR)
[ 171.123859] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 171.129212] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 171.134565] CDB 0 0 0 0 0 0
[ 171.139829] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 171.150439] scsi11:0:6:0: Cmd aborted from QINFIFO
[ 171.155855] AMD-Vi: Event logged [
[ 171.155857] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 171.155892] scsi11: Received split completion error message in OVLY
[ 171.155892] scsi11: Count not complete in OVLY
[ 171.155895] scsi11: PCI error Interrupt
[ 171.155904] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 171.155904] Card was paused
[ 171.155907] INTSTAT[0x11]
[ 171.155907] :(SPLTINT
[ 171.155908] |PCIINT
[ 171.155908] )
[ 171.155911] SELOID[0x0]
[ 171.155911]
[ 171.155914] SELID[0x0]
[ 171.155916]
[ 171.155918] HS_MAILBOX[0x0]
[ 171.155918]
[ 171.155920] INTCTL[0x0]
[ 171.155920]
[ 171.155922] SEQINTSTAT[0x0]
[ 171.155923]
[ 171.155926] SAVED_MODE[0xff]
[ 171.155926]
[ 171.155930] DFFSTAT[0x33]
[ 171.155930] :(CURRFIFO_NONE
[ 171.155930] |FIFO0FREE
[ 171.155930] |FIFO1FREE
[ 171.155931] )
[ 171.155933] SCSISIGI[0x0]
[ 171.155934] :(P_DATAOUT
[ 171.155934] )
[ 171.155937] SCSIPHASE[0x0]
[ 171.155937]
[ 171.155940] SCSIBUS[0x0]
[ 171.155940]
[ 171.155943] LASTPHASE[0x1]
[ 171.155943] :(P_DATAOUT
[ 171.155943] |P_BUSFREE
[ 171.155943] )
[ 171.155947] SCSISEQ0[0x0]
[ 171.155947]
[ 171.155950] SCSISEQ1[0x12]
[ 171.155951] :(ENAUTOATNP
[ 171.155951] |ENRSELI
[ 171.155951] )
[ 171.155954] SEQCTL0[0x0]
[ 171.155954]
[ 171.155957] SEQINTCTL[0x0]
[ 171.155957]
[ 171.155960] SEQ_FLAGS[0x0]
[ 171.155960]
[ 171.155963] SEQ_FLAGS2[0x0]
[ 171.155963]
[ 171.155968] QFREEZE_COUNT[0x0]
[ 171.155969]
[ 171.155974] KERNEL_QFREEZE_COUNT[0x0]
[ 171.155974]
[ 171.155979] MK_MESSAGE_SCB[0xff00]
[ 171.155980]
[ 171.155982] MK_MESSAGE_SCSIID[0xff]
[ 171.155982]
[ 171.155987] SSTAT0[0x0]
[ 171.155987]
[ 171.155990] SSTAT1[0x0]
[ 171.155990]
[ 171.155993] SSTAT2[0x0]
[ 171.155993]
[ 171.155996] SSTAT3[0x0]
[ 171.155996]
[ 171.155999] PERRDIAG[0x0]
[ 171.155999]
[ 171.156002] SIMODE1[0xa4]
[ 171.156002] :(ENSCSIPERR
[ 171.156002] |ENSCSIRST
[ 171.156003] |ENSELTIMO
[ 171.156003] )
[ 171.156006] LQISTAT0[0x0]
[ 171.156007]
[ 171.156010] LQISTAT1[0x0]
[ 171.156010]
[ 171.156013] LQISTAT2[0x0]
[ 171.156013]
[ 171.156016] LQOSTAT0[0x0]
[ 171.156016]
[ 171.156019] LQOSTAT1[0x0]
[ 171.156019]
[ 171.156022] LQOSTAT2[0x0]
[ 171.156022]
[ 171.156043]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 171.156056] qinstart = 0 qinfifonext = 1
QINFIFO:
[ 171.156056] 0x3
[ 171.156058]
WAITING_TID_QUEUES:
[ 171.156078] Pending list:
[ 171.156081]
3 FIFO_USE[0x0]
[ 171.156085] SCB_CONTROL[0x0]
[ 171.156086]
[ 171.156089] SCB_SCSIID[0x0]
[ 171.156089]
[ 171.156090]
Total 1
[ 171.156090] Kernel Free SCB list:
[ 171.156090] 2
[ 171.156090] 1
[ 171.156090] 0
[ 171.156091] Sequencer Complete DMA-inprog list:
[ 171.156096] Sequencer Complete list:
[ 171.156101] Sequencer DMA-Up and Complete list:
[ 171.156107] Sequencer On QFreeze and Complete list:
[ 171.156125]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 171.156128] SEQIMODE[0x3f]
[ 171.156128] :(ENCFG4TCMD
[ 171.156129] |ENCFG4ICMD
[ 171.156129] |ENCFG4TSTAT
[ 171.156129] |ENCFG4ISTAT
[ 171.156129] |ENCFG4DATA
[ 171.156130] |ENSAVEPTRS
[ 171.156130] )
[ 171.156133] SEQINTSRC[0x0]
[ 171.156133]
[ 171.156135] DFCNTRL[0x0]
[ 171.156136]
[ 171.156138] DFSTATUS[0x89]
[ 171.156139] :(FIFOEMP
[ 171.156139] |HDONE
[ 171.156139] |PRELOAD_AVAIL
[ 171.156139] )
[ 171.156142] SG_CACHE_SHADOW[0x2]
[ 171.156143] :(LAST_SEG
[ 171.156143] )
[ 171.156146] SG_STATE[0x0]
[ 171.156147]
[ 171.156150] DFFSXFRCTL[0x0]
[ 171.156150]
[ 171.156153] SOFFCNT[0x0]
[ 171.156153]
[ 171.156156] MDFFSTAT[0x5]
[ 171.156156] :(FIFOFREE
[ 171.156156] |DLZERO
[ 171.156156] )
[ 171.156184] SHADDR = 0x00, SHCNT = 0x0
[ 171.156212] HADDR = 0x00, HCNT = 0x0
[ 171.156215] CCSGCTL[0x10]
[ 171.156216] :(SG_CACHE_AVAIL
[ 171.156216] )
[ 171.156228]
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 171.156230] SEQIMODE[0x3f]
[ 171.156231] :(ENCFG4TCMD
[ 171.156231] |ENCFG4ICMD
[ 171.156231] |ENCFG4TSTAT
[ 171.156231] |ENCFG4ISTAT
[ 171.156232] |ENCFG4DATA
[ 171.156232] |ENSAVEPTRS
[ 171.156232] )
[ 171.156235] SEQINTSRC[0x0]
[ 171.156235]
[ 171.156238] DFCNTRL[0x0]
[ 171.156238]
[ 171.156241] DFSTATUS[0x89]
[ 171.156241] :(FIFOEMP
[ 171.156241] |HDONE
[ 171.156241] |PRELOAD_AVAIL
[ 171.156242] )
[ 171.156245] SG_CACHE_SHADOW[0x2]
[ 171.156245] :(LAST_SEG
[ 171.156245] )
[ 171.156248] SG_STATE[0x0]
[ 171.156248]
[ 171.156251] DFFSXFRCTL[0x0]
[ 171.156251]
[ 171.156254] SOFFCNT[0x0]
[ 171.156254]
[ 171.156257] MDFFSTAT[0x5]
[ 171.156257] :(FIFOFREE
[ 171.156258] |DLZERO
[ 171.156258] )
[ 171.156286] SHADDR = 0x00, SHCNT = 0x0
[ 171.156313] HADDR = 0x00, HCNT = 0x0
[ 171.156316] CCSGCTL[0x10]
[ 171.156316] :(SG_CACHE_AVAIL
[ 171.156317] )
[ 171.156317]
LQIN:
[ 171.156320] 0x0
[ 171.156323] 0x0
[ 171.156326] 0x0
[ 171.156329] 0x0
[ 171.156332] 0x0
[ 171.156335] 0x0
[ 171.156338] 0x0
[ 171.156341] 0x0
[ 171.156344] 0x0
[ 171.156347] 0x0
[ 171.156350] 0x0
[ 171.156353] 0x0
[ 171.156356] 0x0
[ 171.156359] 0x0
[ 171.156362] 0x0
[ 171.156365] 0x0
[ 171.156368] 0x0
[ 171.156371] 0x0
[ 171.156374] 0x0
[ 171.156377] 0x0
[ 171.156385] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 171.156390] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 171.156396] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 171.156399] SIMODE0[0x6c]
[ 171.156399] :(ENOVERRUN
[ 171.156399] |ENIOERR
[ 171.156399] |ENSELDI
[ 171.156400] |ENSELDO
[ 171.156400] )
[ 171.156403] CCSCBCTL[0x4]
[ 171.156403] :(CCSCBDIR
[ 171.156404] )
[ 171.156420] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 171.156435] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 171.156451] CDB 0 0 0 0 0 0
[ 171.156451] STACK:
[ 171.156457] 0x1f
[ 171.156462] 0x0
[ 171.156467] 0x0
[ 171.156472] 0x0
[ 171.156478] 0x0
[ 171.156483] 0x0
[ 171.156488] 0x0
[ 171.156493] 0x0
[ 171.156496]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 171.156520] scsi11: Received a Target Abort in CMC
[ 171.156545] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 171.156582] scsi11: Received split completion error message in OVLY
[ 171.156582] scsi11: Count not complete in OVLY
[ 171.484343] IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 171.494290] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 180.840089] scsi 10:0:6:0: tag#0 Attempting to queue an ABORT message
[ 180.845310] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 180.850519] scsi10: At time of recovery, card was not paused
[ 180.855706] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi10: Dumping Card State while idle, at SEQADDR 0x193
[ 180.866115] Card was paused
[ 180.871258] ACCUM = 0x0, SINDEX = 0x20, DINDEX = 0xa0, ARG_2 = 0x0
[ 180.876440] HCNT = 0x20 SCBPTR = 0x0
[ 180.881574] SCSISIGI[0x0] ERROR[0x40]:(PCIERRSTAT) SCSIBUSL[0x0]
[ 180.886775] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI)
[ 180.891999] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE)
[ 180.897212] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x4]:(SDONE)
[ 180.902438] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 180.907771] SXFRCTL0[0x80]:(DFON) DFCNTRL[0xc]:(DIRECTION|HDMAEN)
[ 180.913066] DFSTATUS[0x71]:(FIFOEMP|MREQPEND|FIFOQWDEMP|DFCACHETH)
[ 180.918347] STACK: 0xe 0x0 0x0 0x187
SCB count = 4
[ 180.928837] Kernel NEXTQSCB = 2
[ 180.934060] Card NEXTQSCB = 3
[ 180.939212] QINFIFO entries: 3
[ 180.944373] Waiting Queue entries:
[ 180.949547] Disconnected Queue entries:
[ 180.954741] QOUTFIFO entries:
[ 180.959889] Sequencer Free SCB List: 1 2
[ 180.965030] Sequencer SCB Info:
0 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 180.975371] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 180.986007] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID)
[ 180.996839] SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff]
[ 181.002367] Pending list:
3 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0]
[ 181.013360] Kernel Free SCB list: 1 0
[ 181.018794] Untagged Q(6): 3
[ 181.024143]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 181.034699] scsi10:0:6:0: Cmd aborted from QINFIFO
[ 181.040001] aic7xxx_abort returns 0x2002
[ 191.848398] scsi 11:0:8:0: tag#0 Attempting to queue an ABORT message:
[ 191.853688] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 191.859489] scsi11: At time of recovery, card was paused
[ 191.864681] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x31 Mode 0x11
[ 191.875065] Card was paused
[ 191.880163] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 191.885298] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 191.890583] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 191.895891] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 191.901217] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 191.906585] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 191.911946] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 191.917379] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 191.922831] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 191.928339] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 191.933880] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 191.939344]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 191.950176] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 191.966370] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 191.981977] Kernel Free SCB list: 2 1 0
[ 191.987097] Sequencer Complete DMA-inprog list:
[ 191.992201] Sequencer Complete list:
[ 191.997228] Sequencer DMA-Up and Complete list:
[ 192.002227] Sequencer On QFreeze and Complete list:
[ 192.007213]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 192.021774] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 192.026755] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 192.031753] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 192.036739] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 192.041733] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 192.056225] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 192.061248] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 192.066338] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 192.071483] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 192.076752] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 192.087439] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 192.092832] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 192.098229] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 192.108960] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 192.114361] CCSCBCTL[0x4]:(CCSCBDIR)
[ 192.119702] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 192.125046] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 192.130392] CDB 0 0 0 0 0 0
[ 192.135649] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 192.146235] scsi11:0:8:0: Cmd aborted from QINFIFO
[ 192.151632] AMD-Vi: Event logged [
[ 192.151635] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 192.151671] scsi11: Received split completion error message in OVLY
[ 192.151671] scsi11: Count not complete in OVLY
[ 192.151675] scsi11: PCI error Interrupt
[ 192.151683] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x34 Mode 0x22
[ 192.151684] Card was paused
[ 192.151687] INTSTAT[0x11]
[ 192.151687] :(SPLTINT
[ 192.151688] |PCIINT
[ 192.151688] )
[ 192.151691] SELOID[0x0]
[ 192.151692]
[ 192.151695] SELID[0x0]
[ 192.151695]
[ 192.151698] HS_MAILBOX[0x0]
[ 192.151698]
[ 192.151701] INTCTL[0x0]
[ 192.151702]
[ 192.151705] SEQINTSTAT[0x0]
[ 192.151705]
[ 192.151708] SAVED_MODE[0xff]
[ 192.151708]
[ 192.151711] DFFSTAT[0x33]
[ 192.151712] :(CURRFIFO_NONE
[ 192.151712] |FIFO0FREE
[ 192.151712] |FIFO1FREE
[ 192.151713] )
[ 192.151716] SCSISIGI[0x0]
[ 192.151716] :(P_DATAOUT
[ 192.151716] )
[ 192.151719] SCSIPHASE[0x0]
[ 192.151719]
[ 192.151722] SCSIBUS[0x0]
[ 192.151722]
[ 192.151725] LASTPHASE[0x1]
[ 192.151726] :(P_DATAOUT
[ 192.151726] |P_BUSFREE
[ 192.151726] )
[ 192.151729] SCSISEQ0[0x0]
[ 192.151729]
[ 192.151732] SCSISEQ1[0x12]
[ 192.151733] :(ENAUTOATNP
[ 192.151733] |ENRSELI
[ 192.151733] )
[ 192.151736] SEQCTL0[0x0]
[ 192.151736]
[ 192.151739] SEQINTCTL[0x0]
[ 192.151739]
[ 192.151742] SEQ_FLAGS[0x0]
[ 192.151742]
[ 192.151745] SEQ_FLAGS2[0x0]
[ 192.151745]
[ 192.151751] QFREEZE_COUNT[0x0]
[ 192.151751]
[ 192.151756] KERNEL_QFREEZE_COUNT[0x0]
[ 192.151756]
[ 192.151762] MK_MESSAGE_SCB[0xff00]
[ 192.151762]
[ 192.151765] MK_MESSAGE_SCSIID[0xff]
[ 192.151765]
[ 192.151768] SSTAT0[0x0]
[ 192.151768]
[ 192.151771] SSTAT1[0x0]
[ 192.151771]
[ 192.151774] SSTAT2[0x0]
[ 192.151774]
[ 192.151777] SSTAT3[0x0]
[ 192.151777]
[ 192.151780] PERRDIAG[0x0]
[ 192.151780]
[ 192.151783] SIMODE1[0xa4]
[ 192.151783] :(ENSCSIPERR
[ 192.151784] |ENSCSIRST
[ 192.151784] |ENSELTIMO
[ 192.151784] )
[ 192.151787] LQISTAT0[0x0]
[ 192.151787]
[ 192.151791] LQISTAT1[0x0]
[ 192.151791]
[ 192.151794] LQISTAT2[0x0]
[ 192.151794]
[ 192.151797] LQOSTAT0[0x0]
[ 192.151797]
[ 192.151800] LQOSTAT1[0x0]
[ 192.151800]
[ 192.151803] LQOSTAT2[0x0]
[ 192.151803]
[ 192.151824]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 192.151839] qinstart = 0 qinfifonext = 1
QINFIFO:
[ 192.151840] 0x3
[ 192.151841]
WAITING_TID_QUEUES:
[ 192.151860] Pending list:
[ 192.151864]
3 FIFO_USE[0x0]
[ 192.151867] SCB_CONTROL[0x0]
[ 192.151867]
[ 192.151870] SCB_SCSIID[0x0]
[ 192.151870]
[ 192.151871]
Total 1
[ 192.151871] Kernel Free SCB list:
[ 192.151872] 2
[ 192.151872] 1
[ 192.151872] 0
[ 192.151873] Sequencer Complete DMA-inprog list:
[ 192.151878] Sequencer Complete list:
[ 192.151883] Sequencer DMA-Up and Complete list:
[ 192.151888] Sequencer On QFreeze and Complete list:
[ 192.151908]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 192.151911] SEQIMODE[0x3f]
[ 192.151911] :(ENCFG4TCMD
[ 192.151911] |ENCFG4ICMD
[ 192.151912] |ENCFG4TSTAT
[ 192.151912] |ENCFG4ISTAT
[ 192.151912] |ENCFG4DATA
[ 192.151913] |ENSAVEPTRS
[ 192.151913] )
[ 192.151916] SEQINTSRC[0x0]
[ 192.151916]
[ 192.151919] DFCNTRL[0x0]
[ 192.151920]
[ 192.151922] DFSTATUS[0x89]
[ 192.151923] :(FIFOEMP
[ 192.151923] |HDONE
[ 192.151923] |PRELOAD_AVAIL
[ 192.151924] )
[ 192.151927] SG_CACHE_SHADOW[0x2]
[ 192.151927] :(LAST_SEG
[ 192.151928] )
[ 192.151931] SG_STATE[0x0]
[ 192.151932]
[ 192.151934] DFFSXFRCTL[0x0]
[ 192.151935]
[ 192.151938] SOFFCNT[0x0]
[ 192.151938]
[ 192.151940] MDFFSTAT[0x5]
[ 192.151941] :(FIFOFREE
[ 192.151941] |DLZERO
[ 192.151941] )
[ 192.151970] SHADDR = 0x00, SHCNT = 0x0
[ 192.151997] HADDR = 0x00, HCNT = 0x0
[ 192.152000] CCSGCTL[0x10]
[ 192.152000] :(SG_CACHE_AVAIL
[ 192.152001] )
[ 192.152012]
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 192.152015] SEQIMODE[0x3f]
[ 192.152015] :(ENCFG4TCMD
[ 192.152016] |ENCFG4ICMD
[ 192.152016] |ENCFG4TSTAT
[ 192.152016] |ENCFG4ISTAT
[ 192.152017] |ENCFG4DATA
[ 192.152017] |ENSAVEPTRS
[ 192.152017] )
[ 192.152021] SEQINTSRC[0x0]
[ 192.152021]
[ 192.152023] DFCNTRL[0x0]
[ 192.152024]
[ 192.152026] DFSTATUS[0x89]
[ 192.152027] :(FIFOEMP
[ 192.152027] |HDONE
[ 192.152027] |PRELOAD_AVAIL
[ 192.152027] )
[ 192.152030] SG_CACHE_SHADOW[0x2]
[ 192.152031] :(LAST_SEG
[ 192.152031] )
[ 192.152034] SG_STATE[0x0]
[ 192.152034]
[ 192.152037] DFFSXFRCTL[0x0]
[ 192.152037]
[ 192.152040] SOFFCNT[0x0]
[ 192.152040]
[ 192.152043] MDFFSTAT[0x5]
[ 192.152043] :(FIFOFREE
[ 192.152043] |DLZERO
[ 192.152044] )
[ 192.152071] SHADDR = 0x00, SHCNT = 0x0
[ 192.152100] HADDR = 0x00, HCNT = 0x0
[ 192.152102] CCSGCTL[0x10]
[ 192.152103] :(SG_CACHE_AVAIL
[ 192.152103] )
[ 192.152103]
LQIN:
[ 192.152106] 0x0
[ 192.152109] 0x0
[ 192.152112] 0x0
[ 192.152116] 0x0
[ 192.152119] 0x0
[ 192.152122] 0x0
[ 192.152125] 0x0
[ 192.152128] 0x0
[ 192.152131] 0x0
[ 192.152134] 0x0
[ 192.152137] 0x0
[ 192.152140] 0x0
[ 192.152143] 0x0
[ 192.152146] 0x0
[ 192.152149] 0x0
[ 192.152152] 0x0
[ 192.152155] 0x0
[ 192.152158] 0x0
[ 192.152161] 0x0
[ 192.152164] 0x0
[ 192.152172] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 192.152177] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 192.152183] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 192.152186] SIMODE0[0x6c]
[ 192.152186] :(ENOVERRUN
[ 192.152186] |ENIOERR
[ 192.152187] |ENSELDI
[ 192.152187] |ENSELDO
[ 192.152187] )
[ 192.152191] CCSCBCTL[0x4]
[ 192.152191] :(CCSCBDIR
[ 192.152191] )
[ 192.152207] scsi11: REG0 == 0x3, SINDEX = 0x1d, DINDEX = 0x0
[ 192.152223] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 192.152239] CDB 0 0 0 0 0 0
[ 192.152239] STACK:
[ 192.152245] 0x20
[ 192.152250] 0x0
[ 192.152255] 0x0
[ 192.152260] 0x0
[ 192.152265] 0x0
[ 192.152271] 0x0
[ 192.152276] 0x0
[ 192.152281] 0x0
[ 192.152284]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 192.152307] scsi11: Received a Target Abort in CMC
[ 192.152334] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 192.152371] scsi11: Received split completion error message in OVLY
[ 192.474942] IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 192.485058] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 192.490256] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001ac0 flags=0x0050]
[ 192.495400] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001bc0 flags=0x0050]
[ 192.500514] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d40 flags=0x0050]
[ 192.505550] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b40 flags=0x0050]
[ 192.510504] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b80 flags=0x0050]
[ 192.515385] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d80 flags=0x0050]
[ 192.520199] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c40 flags=0x0050]
[ 192.524929] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e00 flags=0x0050]
[ 192.529575] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c80 flags=0x0050]
[ 192.534153] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e80 flags=0x0050]
[ 192.538663] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d00 flags=0x0050]
[ 192.543095] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f00 flags=0x0050]
[ 192.547447] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001dc0 flags=0x0050]
[ 192.551704] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f80 flags=0x0050]
[ 192.555866] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e40 flags=0x0050]
[ 192.559943] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001880 flags=0x0050]
[ 192.563943] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001ec0 flags=0x0050]
[ 192.567884] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001900 flags=0x0050]
[ 192.571811] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f40 flags=0x0050]
[ 192.575665] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001980 flags=0x0050]
[ 192.579431] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001840 flags=0x0050]
[ 192.583169] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a00 flags=0x0050]
[ 192.586888] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000018c0 flags=0x0050]
[ 192.590585] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a80 flags=0x0050]
[ 192.594218] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001940 flags=0x0050]
[ 192.597784] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b00 flags=0x0050]
[ 192.601331] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000019c0 flags=0x0050]
[ 192.604839] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c00 flags=0x0050]
[ 192.608329] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a40 flags=0x0050]
[ 192.611788] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001cc0 flags=0x0050]
[ 192.615215] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001fc0 flags=0x0050]
[ 212.840992] scsi 11:0:9:0: tag#0 Attempting to queue an ABORT message:
[ 212.844463] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 212.848479] scsi11: At time of recovery, card was paused
[ 212.851894] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x33 Mode 0x11
[ 212.858684] Card was paused
[ 212.861986] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 212.865347] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 212.868843] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 212.872346] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 212.875797] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 212.879240] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 212.882643] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 212.886081] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 212.889515] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 212.892972] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 212.896389] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 212.899751]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 212.906471] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 212.916490] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 212.926338] Kernel Free SCB list: 2 1 0
[ 212.929631] Sequencer Complete DMA-inprog list:
[ 212.932893] Sequencer Complete list:
[ 212.936104] Sequencer DMA-Up and Complete list:
[ 212.939300] Sequencer On QFreeze and Complete list:
[ 212.942468]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 212.951334] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 212.954525] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 212.957816] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 212.961190] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 212.964712] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 212.975402] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 212.979273] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 212.983247] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 212.987302] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 212.991502] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 213.000140] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 213.004557] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 213.009012] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 213.017989] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 213.022638] CCSCBCTL[0x4]:(CCSCBDIR)
[ 213.027314] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 213.032078] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 213.036928] CDB 0 0 0 0 0 0
[ 213.041771] STACK: 0x20 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 213.051752] scsi11:0:9:0: Cmd aborted from QINFIFO
[ 213.056964] AMD-Vi: Event logged [
[ 213.056966] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 213.057002] scsi11: Received split completion error message in OVLY
[ 213.057003] scsi11: Count not complete in OVLY
[ 213.057006] scsi11: PCI error Interrupt
[ 213.057015] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 213.057015] Card was paused
[ 213.057018] INTSTAT[0x11]
[ 213.057018] :(SPLTINT
[ 213.057018] |PCIINT
[ 213.057019] )
[ 213.057022] SELOID[0x0]
[ 213.057022]
[ 213.057025] SELID[0x0]
[ 213.057025]
[ 213.057027] HS_MAILBOX[0x0]
[ 213.057027]
[ 213.057029] INTCTL[0x0]
[ 213.057029]
[ 213.057031] SEQINTSTAT[0x0]
[ 213.057031]
[ 213.057034] SAVED_MODE[0xff]
[ 213.057035]
[ 213.057037] DFFSTAT[0x33]
[ 213.057037] :(CURRFIFO_NONE
[ 213.057038] |FIFO0FREE
[ 213.057038] |FIFO1FREE
[ 213.057038] )
[ 213.057041] SCSISIGI[0x0]
[ 213.057041] :(P_DATAOUT
[ 213.057041] )
[ 213.057044] SCSIPHASE[0x0]
[ 213.057044]
[ 213.057047] SCSIBUS[0x0]
[ 213.057047]
[ 213.057050] LASTPHASE[0x1]
[ 213.057051] :(P_DATAOUT
[ 213.057051] |P_BUSFREE
[ 213.057051] )
[ 213.057054] SCSISEQ0[0x0]
[ 213.057054]
[ 213.057057] SCSISEQ1[0x12]
[ 213.057058] :(ENAUTOATNP
[ 213.057058] |ENRSELI
[ 213.057058] )
[ 213.057061] SEQCTL0[0x0]
[ 213.057061]
[ 213.057064] SEQINTCTL[0x0]
[ 213.057064]
[ 213.057067] SEQ_FLAGS[0x0]
[ 213.057067]
[ 213.057070] SEQ_FLAGS2[0x0]
[ 213.057070]
[ 213.057075] QFREEZE_COUNT[0x0]
[ 213.057075]
[ 213.057081] KERNEL_QFREEZE_COUNT[0x0]
[ 213.057081]
[ 213.057086] MK_MESSAGE_SCB[0xff00]
[ 213.057086]
[ 213.057089] MK_MESSAGE_SCSIID[0xff]
[ 213.057089]
[ 213.057092] SSTAT0[0x0]
[ 213.057092]
[ 213.057095] SSTAT1[0x0]
[ 213.057095]
[ 213.057098] SSTAT2[0x0]
[ 213.057098]
[ 213.057102] SSTAT3[0x0]
[ 213.057102]
[ 213.057105] PERRDIAG[0x0]
[ 213.057105]
[ 213.057108] SIMODE1[0xa4]
[ 213.057108] :(ENSCSIPERR
[ 213.057108] |ENSCSIRST
[ 213.057109] |ENSELTIMO
[ 213.057109] )
[ 213.057112] LQISTAT0[0x0]
[ 213.057112]
[ 213.057115] LQISTAT1[0x0]
[ 213.057115]
[ 213.057117] LQISTAT2[0x0]
[ 213.057118]
[ 213.057120] LQOSTAT0[0x0]
[ 213.057121]
[ 213.057124] LQOSTAT1[0x0]
[ 213.057124]
[ 213.057127] LQOSTAT2[0x0]
[ 213.057127]
[ 213.057147]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 213.057160] qinstart = 0 qinfifonext = 1
QINFIFO:
[ 213.057161] 0x3
[ 213.057162]
WAITING_TID_QUEUES:
[ 213.057182] Pending list:
[ 213.057185]
3 FIFO_USE[0x0]
[ 213.057188] SCB_CONTROL[0x0]
[ 213.057189]
[ 213.057191] SCB_SCSIID[0x0]
[ 213.057192]
[ 213.057192]
Total 1
[ 213.057192] Kernel Free SCB list:
[ 213.057192] 2
[ 213.057192] 1
[ 213.057193] 0
[ 213.057193] Sequencer Complete DMA-inprog list:
[ 213.057198] Sequencer Complete list:
[ 213.057204] Sequencer DMA-Up and Complete list:
[ 213.057209] Sequencer On QFreeze and Complete list:
[ 213.057228]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 213.057231] SEQIMODE[0x3f]
[ 213.057231] :(ENCFG4TCMD
[ 213.057232] |ENCFG4ICMD
[ 213.057232] |ENCFG4TSTAT
[ 213.057232] |ENCFG4ISTAT
[ 213.057232] |ENCFG4DATA
[ 213.057233] |ENSAVEPTRS
[ 213.057233] )
[ 213.057236] SEQINTSRC[0x0]
[ 213.057236]
[ 213.057239] DFCNTRL[0x0]
[ 213.057239]
[ 213.057241] DFSTATUS[0x89]
[ 213.057242] :(FIFOEMP
[ 213.057242] |HDONE
[ 213.057242] |PRELOAD_AVAIL
[ 213.057242] )
[ 213.057245] SG_CACHE_SHADOW[0x2]
[ 213.057246] :(LAST_SEG
[ 213.057246] )
[ 213.057249] SG_STATE[0x0]
[ 213.057249]
[ 213.057252] DFFSXFRCTL[0x0]
[ 213.057252]
[ 213.057255] SOFFCNT[0x0]
[ 213.057255]
[ 213.057258] MDFFSTAT[0x5]
[ 213.057258] :(FIFOFREE
[ 213.057258] |DLZERO
[ 213.057259] )
[ 213.057286] SHADDR = 0x00, SHCNT = 0x0
[ 213.057314] HADDR = 0x00, HCNT = 0x0
[ 213.057317] CCSGCTL[0x10]
[ 213.057317] :(SG_CACHE_AVAIL
[ 213.057317] )
[ 213.057328]
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 213.057332] SEQIMODE[0x3f]
[ 213.057332] :(ENCFG4TCMD
[ 213.057332] |ENCFG4ICMD
[ 213.057332] |ENCFG4TSTAT
[ 213.057333] |ENCFG4ISTAT
[ 213.057333] |ENCFG4DATA
[ 213.057333] |ENSAVEPTRS
[ 213.057333] )
[ 213.057337] SEQINTSRC[0x0]
[ 213.057337]
[ 213.057339] DFCNTRL[0x0]
[ 213.057340]
[ 213.057342] DFSTATUS[0x89]
[ 213.057343] :(FIFOEMP
[ 213.057343] |HDONE
[ 213.057343] |PRELOAD_AVAIL
[ 213.057343] )
[ 213.057346] SG_CACHE_SHADOW[0x2]
[ 213.057346] :(LAST_SEG
[ 213.057347] )
[ 213.057350] SG_STATE[0x0]
[ 213.057350]
[ 213.057353] DFFSXFRCTL[0x0]
[ 213.057353]
[ 213.057356] SOFFCNT[0x0]
[ 213.057356]
[ 213.057359] MDFFSTAT[0x5]
[ 213.057359] :(FIFOFREE
[ 213.057359] |DLZERO
[ 213.057359] )
[ 213.057387] SHADDR = 0x00, SHCNT = 0x0
[ 213.057415] HADDR = 0x00, HCNT = 0x0
[ 213.057418] CCSGCTL[0x10]
[ 213.057418] :(SG_CACHE_AVAIL
[ 213.057420] )
[ 213.057420]
LQIN:
[ 213.057422] 0x0
[ 213.057425] 0x0
[ 213.057428] 0x0
[ 213.057431] 0x0
[ 213.057434] 0x0
[ 213.057437] 0x0
[ 213.057441] 0x0
[ 213.057443] 0x0
[ 213.057446] 0x0
[ 213.057449] 0x0
[ 213.057452] 0x0
[ 213.057455] 0x0
[ 213.057458] 0x0
[ 213.057462] 0x0
[ 213.057464] 0x0
[ 213.057467] 0x0
[ 213.057470] 0x0
[ 213.057473] 0x0
[ 213.057476] 0x0
[ 213.057479] 0x0
[ 213.057488] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 213.057493] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 213.057498] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 213.057501] SIMODE0[0x6c]
[ 213.057501] :(ENOVERRUN
[ 213.057501] |ENIOERR
[ 213.057502] |ENSELDI
[ 213.057502] |ENSELDO
[ 213.057502] )
[ 213.057506] CCSCBCTL[0x4]
[ 213.057506] :(CCSCBDIR
[ 213.057506] )
[ 213.057522] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 213.057538] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 213.057553] CDB 0 0 0 0 0 0
[ 213.057554] STACK:
[ 213.057559] 0x1f
[ 213.057564] 0x0
[ 213.057570] 0x0
[ 213.057574] 0x0
[ 213.057579] 0x0
[ 213.057584] 0x0
[ 213.057590] 0x0
[ 213.057595] 0x0
[ 213.057598]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 213.057621] scsi11: Received a Target Abort in CMC
[ 213.057640] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 213.057677] scsi11: Received split completion error message in OVLY
[ 213.379794] IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 213.389910] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 213.395102] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002780 flags=0x0050]
[ 213.400237] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002740 flags=0x0050]
[ 213.405346] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002500 flags=0x0050]
[ 213.410377] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002140 flags=0x0050]
[ 213.415326] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002580 flags=0x0050]
[ 213.420207] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000021c0 flags=0x0050]
[ 213.425020] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002600 flags=0x0050]
[ 213.429749] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002240 flags=0x0050]
[ 213.434399] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002680 flags=0x0050]
[ 213.438981] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000022c0 flags=0x0050]
[ 213.443495] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002700 flags=0x0050]
[ 213.447933] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002340 flags=0x0050]
[ 213.452293] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002100 flags=0x0050]
[ 213.456558] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000027c0 flags=0x0050]
[ 213.460725] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002180 flags=0x0050]
[ 213.464808] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000023c0 flags=0x0050]
[ 213.468813] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002200 flags=0x0050]
[ 213.472763] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002440 flags=0x0050]
[ 213.476700] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002280 flags=0x0050]
[ 213.480559] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000024c0 flags=0x0050]
[ 213.484334] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002300 flags=0x0050]
[ 213.488084] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002540 flags=0x0050]
[ 213.491812] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002380 flags=0x0050]
[ 213.495520] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000025c0 flags=0x0050]
[ 213.499163] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002400 flags=0x0050]
[ 213.502741] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002640 flags=0x0050]
[ 213.506299] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002480 flags=0x0050]
[ 213.509818] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000026c0 flags=0x0050]
[ 233.833585] scsi 11:0:10:0: tag#0 Attempting to queue an ABORT message:
[ 233.837143] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 233.841260] scsi11: At time of recovery, card was paused
[ 233.844851] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x31 Mode 0x11
[ 233.852279] Card was paused
[ 233.855904] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 233.859567] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 233.863336] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 233.867073] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 233.870781] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 233.874530] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 233.878287] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 233.882053] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 233.885796] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 233.889565] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 233.893311] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 233.896968]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 233.904081] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 233.914688] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 233.925171] Kernel Free SCB list: 2 1 0
[ 233.928676] Sequencer Complete DMA-inprog list:
[ 233.932157] Sequencer Complete list:
[ 233.935605] Sequencer DMA-Up and Complete list:
[ 233.939025] Sequencer On QFreeze and Complete list:
[ 233.942420]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 233.952241] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 233.955592] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 233.958909] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 233.962303] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 233.965842] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 233.976580] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 233.980467] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 233.984459] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 233.988529] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 233.992743] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 234.001414] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 234.005849] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 234.010323] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 234.019330] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 234.023991] CCSCBCTL[0x4]:(CCSCBDIR)
[ 234.028681] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 234.033457] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 234.038322] CDB 0 0 0 0 0 0
[ 234.043180] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 234.053196] scsi11:0:10:0: Cmd aborted from QINFIFO
[ 234.058411] AMD-Vi: Event logged [
[ 234.058414] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 234.058448] scsi11: Received split completion error message in OVLY
[ 234.058449] scsi11: Count not complete in OVLY
[ 234.058453] scsi11: PCI error Interrupt
[ 234.058461] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 234.058461] Card was paused
[ 234.058464] INTSTAT[0x11]
[ 234.058464] :(SPLTINT
[ 234.058464] |PCIINT
[ 234.058465] )
[ 234.058467] SELOID[0x0]
[ 234.058468]
[ 234.058470] SELID[0x0]
[ 234.058471]
[ 234.058474] HS_MAILBOX[0x0]
[ 234.058474]
[ 234.058476] INTCTL[0x0]
[ 234.058476]
[ 234.058478] SEQINTSTAT[0x0]
[ 234.058479]
[ 234.058482] SAVED_MODE[0xff]
[ 234.058482]
[ 234.058485] DFFSTAT[0x33]
[ 234.058485] :(CURRFIFO_NONE
[ 234.058485] |FIFO0FREE
[ 234.058486] |FIFO1FREE
[ 234.058486] )
[ 234.058489] SCSISIGI[0x0]
[ 234.058489] :(P_DATAOUT
[ 234.058489] )
[ 234.058492] SCSIPHASE[0x0]
[ 234.058492]
[ 234.058495] SCSIBUS[0x0]
[ 234.058495]
[ 234.058498] LASTPHASE[0x1]
[ 234.058498] :(P_DATAOUT
[ 234.058499] |P_BUSFREE
[ 234.058499] )
[ 234.058502] SCSISEQ0[0x0]
[ 234.058502]
[ 234.058505] SCSISEQ1[0x12]
[ 234.058505] :(ENAUTOATNP
[ 234.058505] |ENRSELI
[ 234.058506] )
[ 234.058509] SEQCTL0[0x0]
[ 234.058509]
[ 234.058512] SEQINTCTL[0x0]
[ 234.058512]
[ 234.058515] SEQ_FLAGS[0x0]
[ 234.058515]
[ 234.058517] SEQ_FLAGS2[0x0]
[ 234.058518]
[ 234.058523] QFREEZE_COUNT[0x0]
[ 234.058523]
[ 234.058528] KERNEL_QFREEZE_COUNT[0x0]
[ 234.058528]
[ 234.058533] MK_MESSAGE_SCB[0xff00]
[ 234.058534]
[ 234.058536] MK_MESSAGE_SCSIID[0xff]
[ 234.058536]
[ 234.058539] SSTAT0[0x0]
[ 234.058539]
[ 234.058542] SSTAT1[0x0]
[ 234.058542]
[ 234.058545] SSTAT2[0x0]
[ 234.058545]
[ 234.058548] SSTAT3[0x0]
[ 234.058548]
[ 234.058551] PERRDIAG[0x0]
[ 234.058551]
[ 234.058554] SIMODE1[0xa4]
[ 234.058555] :(ENSCSIPERR
[ 234.058555] |ENSCSIRST
[ 234.058555] |ENSELTIMO
[ 234.058555] )
[ 234.058558] LQISTAT0[0x0]
[ 234.058558]
[ 234.058561] LQISTAT1[0x0]
[ 234.058561]
[ 234.058564] LQISTAT2[0x0]
[ 234.058564]
[ 234.058567] LQOSTAT0[0x0]
[ 234.058567]
[ 234.058570] LQOSTAT1[0x0]
[ 234.058570]
[ 234.058573] LQOSTAT2[0x0]
[ 234.058573]
[ 234.058593]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 234.058608] qinstart = 0 qinfifonext = 1
QINFIFO:
[ 234.058609] 0x3
[ 234.058610]
WAITING_TID_QUEUES:
[ 234.058629] Pending list:
[ 234.058633]
3 FIFO_USE[0x0]
[ 234.058636] SCB_CONTROL[0x0]
[ 234.058636]
[ 234.058639] SCB_SCSIID[0x0]
[ 234.058639]
[ 234.058640]
Total 1
[ 234.058640] Kernel Free SCB list:
[ 234.058640] 2
[ 234.058640] 1
[ 234.058641] 0
[ 234.058641] Sequencer Complete DMA-inprog list:
[ 234.058646] Sequencer Complete list:
[ 234.058651] Sequencer DMA-Up and Complete list:
[ 234.058657] Sequencer On QFreeze and Complete list:
[ 234.058676]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 234.058679] SEQIMODE[0x3f]
[ 234.058679] :(ENCFG4TCMD
[ 234.058679] |ENCFG4ICMD
[ 234.058680] |ENCFG4TSTAT
[ 234.058680] |ENCFG4ISTAT
[ 234.058680] |ENCFG4DATA
[ 234.058680] |ENSAVEPTRS
[ 234.058681] )
[ 234.058683] SEQINTSRC[0x0]
[ 234.058684]
[ 234.058686] DFCNTRL[0x0]
[ 234.058686]
[ 234.058689] DFSTATUS[0x89]
[ 234.058690] :(FIFOEMP
[ 234.058690] |HDONE
[ 234.058690] |PRELOAD_AVAIL
[ 234.058690] )
[ 234.058693] SG_CACHE_SHADOW[0x2]
[ 234.058693] :(LAST_SEG
[ 234.058694] )
[ 234.058697] SG_STATE[0x0]
[ 234.058697]
[ 234.058700] DFFSXFRCTL[0x0]
[ 234.058700]
[ 234.058703] SOFFCNT[0x0]
[ 234.058703]
[ 234.058706] MDFFSTAT[0x5]
[ 234.058706] :(FIFOFREE
[ 234.058706] |DLZERO
[ 234.058706] )
[ 234.058734] SHADDR = 0x00, SHCNT = 0x0
[ 234.058763] HADDR = 0x00, HCNT = 0x0
[ 234.058765] CCSGCTL[0x10]
[ 234.058766] :(SG_CACHE_AVAIL
[ 234.058766] )
[ 234.058777]
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 234.058780] SEQIMODE[0x3f]
[ 234.058780] :(ENCFG4TCMD
[ 234.058780] |ENCFG4ICMD
[ 234.058780] |ENCFG4TSTAT
[ 234.058781] |ENCFG4ISTAT
[ 234.058781] |ENCFG4DATA
[ 234.058781] |ENSAVEPTRS
[ 234.058781] )
[ 234.058784] SEQINTSRC[0x0]
[ 234.058785]
[ 234.058787] DFCNTRL[0x0]
[ 234.058787]
[ 234.058790] DFSTATUS[0x89]
[ 234.058790] :(FIFOEMP
[ 234.058791] |HDONE
[ 234.058791] |PRELOAD_AVAIL
[ 234.058791] )
[ 234.058794] SG_CACHE_SHADOW[0x2]
[ 234.058794] :(LAST_SEG
[ 234.058794] )
[ 234.058798] SG_STATE[0x0]
[ 234.058798]
[ 234.058801] DFFSXFRCTL[0x0]
[ 234.058801]
[ 234.058804] SOFFCNT[0x0]
[ 234.058804]
[ 234.058807] MDFFSTAT[0x5]
[ 234.058807] :(FIFOFREE
[ 234.058807] |DLZERO
[ 234.058807] )
[ 234.058835] SHADDR = 0x00, SHCNT = 0x0
[ 234.058863] HADDR = 0x00, HCNT = 0x0
[ 234.058866] CCSGCTL[0x10]
[ 234.058866] :(SG_CACHE_AVAIL
[ 234.058866] )
[ 234.058866]
LQIN:
[ 234.058869] 0x0
[ 234.058872] 0x0
[ 234.058875] 0x0
[ 234.058878] 0x0
[ 234.058881] 0x0
[ 234.058884] 0x0
[ 234.058887] 0x0
[ 234.058890] 0x0
[ 234.058893] 0x0
[ 234.058896] 0x0
[ 234.058899] 0x0
[ 234.058902] 0x0
[ 234.058905] 0x0
[ 234.058908] 0x0
[ 234.058911] 0x0
[ 234.058914] 0x0
[ 234.058917] 0x0
[ 234.058920] 0x0
[ 234.058923] 0x0
[ 234.058926] 0x0
[ 234.058935] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 234.058940] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 234.058945] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 234.058948] SIMODE0[0x6c]
[ 234.058948] :(ENOVERRUN
[ 234.058948] |ENIOERR
[ 234.058949] |ENSELDI
[ 234.058949] |ENSELDO
[ 234.058949] )
[ 234.058953] CCSCBCTL[0x4]
[ 234.058953] :(CCSCBDIR
[ 234.058953] )
[ 234.058969] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 234.058985] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 234.059000] CDB 0 0 0 0 0 0
[ 234.059001] STACK:
[ 234.059006] 0x1f
[ 234.059011] 0x0
[ 234.059017] 0x0
[ 234.059022] 0x0
[ 234.059027] 0x0
[ 234.059032] 0x0
[ 234.059037] 0x0
[ 234.059043] 0x0
[ 234.059046]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 234.059069] scsi11: Received a Target Abort in CMC
[ 234.059087] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 234.059124] scsi11: Received split completion error message in OVLY
[ 234.059124] scsi11: Count not complete in OVLY
[ 234.386504] IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 234.396451] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 254.826180] scsi 11:0:11:0: tag#0 Attempting to queue an ABORT message:
[ 254.831399] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 254.837138] scsi11: At time of recovery, card was paused
[ 254.842311] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x31 Mode 0x11
[ 254.852732] Card was paused
[ 254.857879] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 254.863092] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 254.868446] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 254.873788] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 254.879118] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 254.884473] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 254.889791] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 254.895140] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 254.900492] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 254.905894] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 254.911309] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 254.916714]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 254.927401] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 254.943547] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 254.959658] Kernel Free SCB list: 2 1 0
[ 254.965087] Sequencer Complete DMA-inprog list:
[ 254.970551] Sequencer Complete list:
[ 254.975989] Sequencer DMA-Up and Complete list:
[ 254.981442] Sequencer On QFreeze and Complete list:
[ 254.986907]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 255.003129] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 255.008613] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 255.014104] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 255.019581] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 255.025116] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 255.041427] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 255.046967] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 255.052511] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 255.058042] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 255.063629] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 255.074732] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 255.080273] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 255.085818] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 255.096811] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 255.102373] CCSCBCTL[0x4]:(CCSCBDIR)
[ 255.107905] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 255.113460] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 255.119029] CDB 0 0 0 0 0 0
[ 255.124555] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 255.135672] scsi11:0:11:0: Cmd aborted from QINFIFO
[ 255.141358] AMD-Vi: Event logged [
[ 255.141361] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 255.141397] scsi11: Received split completion error message in OVLY
[ 255.141397] scsi11: Count not complete in OVLY
[ 255.141401] scsi11: PCI error Interrupt
[ 255.141410] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 255.141410] Card was paused
[ 255.141412] INTSTAT[0x11]
[ 255.141413] :(SPLTINT
[ 255.141413] |PCIINT
[ 255.141413] )
[ 255.141416] SELOID[0x0]
[ 255.141417]
[ 255.141420] SELID[0x0]
[ 255.141421]
[ 255.141423] HS_MAILBOX[0x0]
[ 255.141423]
[ 255.141425] INTCTL[0x0]
[ 255.141425]
[ 255.141428] SEQINTSTAT[0x0]
[ 255.141428]
[ 255.141431] SAVED_MODE[0xff]
[ 255.141432]
[ 255.141435] DFFSTAT[0x33]
[ 255.141435] :(CURRFIFO_NONE
[ 255.141435] |FIFO0FREE
[ 255.141436] |FIFO1FREE
[ 255.141436] )
[ 255.141439] SCSISIGI[0x0]
[ 255.141439] :(P_DATAOUT
[ 255.141439] )
[ 255.141442] SCSIPHASE[0x0]
[ 255.141442]
[ 255.141445] SCSIBUS[0x0]
[ 255.141445]
[ 255.141448] LASTPHASE[0x1]
[ 255.141448] :(P_DATAOUT
[ 255.141449] |P_BUSFREE
[ 255.141449] )
[ 255.141452] SCSISEQ0[0x0]
[ 255.141452]
[ 255.141455] SCSISEQ1[0x12]
[ 255.141455] :(ENAUTOATNP
[ 255.141456] |ENRSELI
[ 255.141456] )
[ 255.141459] SEQCTL0[0x0]
[ 255.141459]
[ 255.141462] SEQINTCTL[0x0]
[ 255.141462]
[ 255.141465] SEQ_FLAGS[0x0]
[ 255.141465]
[ 255.141468] SEQ_FLAGS2[0x0]
[ 255.141468]
[ 255.141473] QFREEZE_COUNT[0x0]
[ 255.141473]
[ 255.141478] KERNEL_QFREEZE_COUNT[0x0]
[ 255.141479]
[ 255.141484] MK_MESSAGE_SCB[0xff00]
[ 255.141484]
[ 255.141487] MK_MESSAGE_SCSIID[0xff]
[ 255.141487]
[ 255.141490] SSTAT0[0x0]
[ 255.141490]
[ 255.141493] SSTAT1[0x0]
[ 255.141493]
[ 255.141496] SSTAT2[0x0]
[ 255.141497]
[ 255.141500] SSTAT3[0x0]
[ 255.141500]
[ 255.141503] PERRDIAG[0x0]
[ 255.141503]
[ 255.141506] SIMODE1[0xa4]
[ 255.141506] :(ENSCSIPERR
[ 255.141506] |ENSCSIRST
[ 255.141507] |ENSELTIMO
[ 255.141507] )
[ 255.141509] LQISTAT0[0x0]
[ 255.141510]
[ 255.141512] LQISTAT1[0x0]
[ 255.141513]
[ 255.141515] LQISTAT2[0x0]
[ 255.141515]
[ 255.141519] LQOSTAT0[0x0]
[ 255.141519]
[ 255.141522] LQOSTAT1[0x0]
[ 255.141522]
[ 255.141524] LQOSTAT2[0x0]
[ 255.141525]
[ 255.141546]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 255.141559] qinstart = 0 qinfifonext = 1
QINFIFO:
[ 255.141560] 0x3
[ 255.141561]
WAITING_TID_QUEUES:
[ 255.141580] Pending list:
[ 255.141584]
3 FIFO_USE[0x0]
[ 255.141587] SCB_CONTROL[0x0]
[ 255.141587]
[ 255.141590] SCB_SCSIID[0x0]
[ 255.141590]
[ 255.141591]
Total 1
[ 255.141591] Kernel Free SCB list:
[ 255.141591] 2
[ 255.141591] 1
[ 255.141591] 0
[ 255.141592] Sequencer Complete DMA-inprog list:
[ 255.141597] Sequencer Complete list:
[ 255.141602] Sequencer DMA-Up and Complete list:
[ 255.141608] Sequencer On QFreeze and Complete list:
[ 255.141627]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 255.141630] SEQIMODE[0x3f]
[ 255.141631] :(ENCFG4TCMD
[ 255.141631] |ENCFG4ICMD
[ 255.141631] |ENCFG4TSTAT
[ 255.141631] |ENCFG4ISTAT
[ 255.141632] |ENCFG4DATA
[ 255.141632] |ENSAVEPTRS
[ 255.141632] )
[ 255.141635] SEQINTSRC[0x0]
[ 255.141635]
[ 255.141638] DFCNTRL[0x0]
[ 255.141638]
[ 255.141641] DFSTATUS[0x89]
[ 255.141641] :(FIFOEMP
[ 255.141641] |HDONE
[ 255.141642] |PRELOAD_AVAIL
[ 255.141642] )
[ 255.141645] SG_CACHE_SHADOW[0x2]
[ 255.141645] :(LAST_SEG
[ 255.141645] )
[ 255.141648] SG_STATE[0x0]
[ 255.141649]
[ 255.141651] DFFSXFRCTL[0x0]
[ 255.141652]
[ 255.141654] SOFFCNT[0x0]
[ 255.141655]
[ 255.141657] MDFFSTAT[0x5]
[ 255.141658] :(FIFOFREE
[ 255.141658] |DLZERO
[ 255.141658] )
[ 255.141686] SHADDR = 0x00, SHCNT = 0x0
[ 255.141714] HADDR = 0x00, HCNT = 0x0
[ 255.141716] CCSGCTL[0x10]
[ 255.141717] :(SG_CACHE_AVAIL
[ 255.141717] )
[ 255.141728]
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 255.141731] SEQIMODE[0x3f]
[ 255.141731] :(ENCFG4TCMD
[ 255.141732] |ENCFG4ICMD
[ 255.141732] |ENCFG4TSTAT
[ 255.141732] |ENCFG4ISTAT
[ 255.141732] |ENCFG4DATA
[ 255.141733] |ENSAVEPTRS
[ 255.141733] )
[ 255.141736] SEQINTSRC[0x0]
[ 255.141737]
[ 255.141740] DFCNTRL[0x0]
[ 255.141740]
[ 255.141742] DFSTATUS[0x89]
[ 255.141743] :(FIFOEMP
[ 255.141743] |HDONE
[ 255.141743] |PRELOAD_AVAIL
[ 255.141743] )
[ 255.141746] SG_CACHE_SHADOW[0x2]
[ 255.141747] :(LAST_SEG
[ 255.141747] )
[ 255.141750] SG_STATE[0x0]
[ 255.141750]
[ 255.141753] DFFSXFRCTL[0x0]
[ 255.141753]
[ 255.141756] SOFFCNT[0x0]
[ 255.141756]
[ 255.141759] MDFFSTAT[0x5]
[ 255.141760] :(FIFOFREE
[ 255.141760] |DLZERO
[ 255.141760] )
[ 255.141787] SHADDR = 0x00, SHCNT = 0x0
[ 255.141815] HADDR = 0x00, HCNT = 0x0
[ 255.141818] CCSGCTL[0x10]
[ 255.141818] :(SG_CACHE_AVAIL
[ 255.141818] )
[ 255.141819]
LQIN:
[ 255.141822] 0x0
[ 255.141825] 0x0
[ 255.141828] 0x0
[ 255.141831] 0x0
[ 255.141833] 0x0
[ 255.141836] 0x0
[ 255.141839] 0x0
[ 255.141842] 0x0
[ 255.141846] 0x0
[ 255.141848] 0x0
[ 255.141851] 0x0
[ 255.141854] 0x0
[ 255.141857] 0x0
[ 255.141860] 0x0
[ 255.141863] 0x0
[ 255.141867] 0x0
[ 255.141869] 0x0
[ 255.141872] 0x0
[ 255.141875] 0x0
[ 255.141878] 0x0
[ 255.141887] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 255.141892] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 255.141897] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 255.141900] SIMODE0[0x6c]
[ 255.141901] :(ENOVERRUN
[ 255.141901] |ENIOERR
[ 255.141901] |ENSELDI
[ 255.141901] |ENSELDO
[ 255.141901] )
[ 255.141905] CCSCBCTL[0x4]
[ 255.141905] :(CCSCBDIR
[ 255.141905] )
[ 255.141921] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 255.141937] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 255.141953] CDB 0 0 0 0 0 0
[ 255.141953] STACK:
[ 255.141958] 0x1f
[ 255.141964] 0x0
[ 255.141969] 0x0
[ 255.141974] 0x0
[ 255.141979] 0x0
[ 255.141984] 0x0
[ 255.141990] 0x0
[ 255.141995] 0x0
[ 255.141998]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 255.142022] scsi11: Received a Target Abort in CMC
[ 255.142047] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 255.142084] scsi11: Received split completion error message in OVLY
[ 255.466648] IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 255.476766] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 255.481962] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002680 flags=0x0050]
[ 255.487101] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002100 flags=0x0050]
[ 255.492210] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000027c0 flags=0x0050]
[ 255.497243] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000026c0 flags=0x0050]
[ 255.502192] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002180 flags=0x0050]
[ 255.507076] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002140 flags=0x0050]
[ 255.511889] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002780 flags=0x0050]
[ 255.516621] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002200 flags=0x0050]
[ 255.521272] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002280 flags=0x0050]
[ 255.525855] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000021c0 flags=0x0050]
[ 255.530369] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002700 flags=0x0050]
[ 255.534809] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002240 flags=0x0050]
[ 255.539168] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002740 flags=0x0050]
[ 255.543433] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000022c0 flags=0x0050]
[ 255.547598] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002300 flags=0x0050]
[ 255.551679] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002340 flags=0x0050]
[ 255.555682] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002380 flags=0x0050]
[ 255.559628] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000023c0 flags=0x0050]
[ 255.563556] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002400 flags=0x0050]
[ 255.567410] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002440 flags=0x0050]
[ 255.571177] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002480 flags=0x0050]
[ 255.574921] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000024c0 flags=0x0050]
[ 255.578638] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002500 flags=0x0050]
[ 255.582333] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002540 flags=0x0050]
[ 255.585963] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002580 flags=0x0050]
[ 255.589525] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000025c0 flags=0x0050]
[ 255.593060] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002600 flags=0x0050]
[ 255.596559] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002640 flags=0x0050]
[ 275.850772] scsi 11:0:12:0: tag#0 Attempting to queue an ABORT message:
[ 275.854306] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 275.858399] scsi11: At time of recovery, card was paused
[ 275.861963] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x31 Mode 0x11
[ 275.869340] Card was paused
[ 275.872938] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 275.876576] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 275.880321] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 275.884032] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 275.887717] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 275.891440] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 275.895173] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 275.898916] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 275.902634] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 275.906382] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 275.910107] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 275.913743]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 275.920817] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 275.931358] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 275.941774] Kernel Free SCB list: 2 1 0
[ 275.945256] Sequencer Complete DMA-inprog list:
[ 275.948716] Sequencer Complete list:
[ 275.952142] Sequencer DMA-Up and Complete list:
[ 275.955541] Sequencer On QFreeze and Complete list:
[ 275.958913]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 275.968668] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 275.971996] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 275.975292] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 275.978665] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 275.982184] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 275.992865] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 275.996735] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 276.000705] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 276.004755] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 276.008948] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 276.017573] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 276.021987] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 276.026443] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 276.035411] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 276.040056] CCSCBCTL[0x4]:(CCSCBDIR)
[ 276.044731] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 276.049497] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 276.054346] CDB 0 0 0 0 0 0
[ 276.059194] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 276.069186] scsi11:0:12:0: Cmd aborted from QINFIFO
[ 276.074404] AMD-Vi: Event logged [
[ 276.074407] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 276.074444] scsi11: Received split completion error message in OVLY
[ 276.074445] scsi11: Count not complete in OVLY
[ 276.074448] scsi11: PCI error Interrupt
[ 276.074457] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 276.074457] Card was paused
[ 276.074460] INTSTAT[0x11]
[ 276.074460] :(SPLTINT
[ 276.074461] |PCIINT
[ 276.074461] )
[ 276.074464] SELOID[0x0]
[ 276.074466]
[ 276.074468] SELID[0x0]
[ 276.074468]
[ 276.074470] HS_MAILBOX[0x0]
[ 276.074470]
[ 276.074473] INTCTL[0x0]
[ 276.074473]
[ 276.074476] SEQINTSTAT[0x0]
[ 276.074476]
[ 276.074479] SAVED_MODE[0xff]
[ 276.074479]
[ 276.074482] DFFSTAT[0x33]
[ 276.074482] :(CURRFIFO_NONE
[ 276.074483] |FIFO0FREE
[ 276.074483] |FIFO1FREE
[ 276.074483] )
[ 276.074486] SCSISIGI[0x0]
[ 276.074486] :(P_DATAOUT
[ 276.074486] )
[ 276.074489] SCSIPHASE[0x0]
[ 276.074489]
[ 276.074492] SCSIBUS[0x0]
[ 276.074492]
[ 276.074495] LASTPHASE[0x1]
[ 276.074496] :(P_DATAOUT
[ 276.074496] |P_BUSFREE
[ 276.074496] )
[ 276.074499] SCSISEQ0[0x0]
[ 276.074500]
[ 276.074504] SCSISEQ1[0x12]
[ 276.074504] :(ENAUTOATNP
[ 276.074504] |ENRSELI
[ 276.074504] )
[ 276.074507] SEQCTL0[0x0]
[ 276.074507]
[ 276.074510] SEQINTCTL[0x0]
[ 276.074510]
[ 276.074513] SEQ_FLAGS[0x0]
[ 276.074514]
[ 276.074516] SEQ_FLAGS2[0x0]
[ 276.074516]
[ 276.074522] QFREEZE_COUNT[0x0]
[ 276.074522]
[ 276.074528] KERNEL_QFREEZE_COUNT[0x0]
[ 276.074528]
[ 276.074533] MK_MESSAGE_SCB[0xff00]
[ 276.074534]
[ 276.074536] MK_MESSAGE_SCSIID[0xff]
[ 276.074537]
[ 276.074539] SSTAT0[0x0]
[ 276.074540]
[ 276.074542] SSTAT1[0x0]
[ 276.074544]
[ 276.074547] SSTAT2[0x0]
[ 276.074547]
[ 276.074550] SSTAT3[0x0]
[ 276.074550]
[ 276.074553] PERRDIAG[0x0]
[ 276.074553]
[ 276.074556] SIMODE1[0xa4]
[ 276.074556] :(ENSCSIPERR
[ 276.074556] |ENSCSIRST
[ 276.074557] |ENSELTIMO
[ 276.074557] )
[ 276.074560] LQISTAT0[0x0]
[ 276.074560]
[ 276.074563] LQISTAT1[0x0]
[ 276.074563]
[ 276.074566] LQISTAT2[0x0]
[ 276.074566]
[ 276.074568] LQOSTAT0[0x0]
[ 276.074569]
[ 276.074571] LQOSTAT1[0x0]
[ 276.074572]
[ 276.074575] LQOSTAT2[0x0]
[ 276.074575]
[ 276.074596]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 276.074610] qinstart = 0 qinfifonext = 1
QINFIFO:
[ 276.074611] 0x3
[ 276.074612]
WAITING_TID_QUEUES:
[ 276.074631] Pending list:
[ 276.074634]
3 FIFO_USE[0x0]
[ 276.074638] SCB_CONTROL[0x0]
[ 276.074638]
[ 276.074641] SCB_SCSIID[0x0]
[ 276.074641]
[ 276.074641]
Total 1
[ 276.074642] Kernel Free SCB list:
[ 276.074642] 2
[ 276.074642] 1
[ 276.074642] 0
[ 276.074643] Sequencer Complete DMA-inprog list:
[ 276.074648] Sequencer Complete list:
[ 276.074653] Sequencer DMA-Up and Complete list:
[ 276.074658] Sequencer On QFreeze and Complete list:
[ 276.074678]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 276.074681] SEQIMODE[0x3f]
[ 276.074681] :(ENCFG4TCMD
[ 276.074681] |ENCFG4ICMD
[ 276.074681] |ENCFG4TSTAT
[ 276.074682] |ENCFG4ISTAT
[ 276.074682] |ENCFG4DATA
[ 276.074682] |ENSAVEPTRS
[ 276.074682] )
[ 276.074685] SEQINTSRC[0x0]
[ 276.074685]
[ 276.074688] DFCNTRL[0x0]
[ 276.074688]
[ 276.074691] DFSTATUS[0x89]
[ 276.074691] :(FIFOEMP
[ 276.074692] |HDONE
[ 276.074692] |PRELOAD_AVAIL
[ 276.074692] )
[ 276.074696] SG_CACHE_SHADOW[0x2]
[ 276.074696] :(LAST_SEG
[ 276.074696] )
[ 276.074699] SG_STATE[0x0]
[ 276.074699]
[ 276.074702] DFFSXFRCTL[0x0]
[ 276.074702]
[ 276.074705] SOFFCNT[0x0]
[ 276.074705]
[ 276.074708] MDFFSTAT[0x5]
[ 276.074708] :(FIFOFREE
[ 276.074709] |DLZERO
[ 276.074709] )
[ 276.074737] SHADDR = 0x00, SHCNT = 0x0
[ 276.074764] HADDR = 0x00, HCNT = 0x0
[ 276.074767] CCSGCTL[0x10]
[ 276.074768] :(SG_CACHE_AVAIL
[ 276.074768] )
[ 276.074779]
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 276.074781] SEQIMODE[0x3f]
[ 276.074782] :(ENCFG4TCMD
[ 276.074782] |ENCFG4ICMD
[ 276.074782] |ENCFG4TSTAT
[ 276.074782] |ENCFG4ISTAT
[ 276.074783] |ENCFG4DATA
[ 276.074783] |ENSAVEPTRS
[ 276.074783] )
[ 276.074786] SEQINTSRC[0x0]
[ 276.074786]
[ 276.074789] DFCNTRL[0x0]
[ 276.074789]
[ 276.074792] DFSTATUS[0x89]
[ 276.074792] :(FIFOEMP
[ 276.074792] |HDONE
[ 276.074793] |PRELOAD_AVAIL
[ 276.074793] )
[ 276.074796] SG_CACHE_SHADOW[0x2]
[ 276.074796] :(LAST_SEG
[ 276.074796] )
[ 276.074799] SG_STATE[0x0]
[ 276.074799]
[ 276.074802] DFFSXFRCTL[0x0]
[ 276.074802]
[ 276.074805] SOFFCNT[0x0]
[ 276.074806]
[ 276.074808] MDFFSTAT[0x5]
[ 276.074809] :(FIFOFREE
[ 276.074809] |DLZERO
[ 276.074809] )
[ 276.074837] SHADDR = 0x00, SHCNT = 0x0
[ 276.074864] HADDR = 0x00, HCNT = 0x0
[ 276.074867] CCSGCTL[0x10]
[ 276.074868] :(SG_CACHE_AVAIL
[ 276.074868] )
[ 276.074868]
LQIN:
[ 276.074871] 0x0
[ 276.074874] 0x0
[ 276.074877] 0x0
[ 276.074880] 0x0
[ 276.074883] 0x0
[ 276.074886] 0x0
[ 276.074889] 0x0
[ 276.074892] 0x0
[ 276.074895] 0x0
[ 276.074898] 0x0
[ 276.074901] 0x0
[ 276.074904] 0x0
[ 276.074907] 0x0
[ 276.074910] 0x0
[ 276.074912] 0x0
[ 276.074915] 0x0
[ 276.074918] 0x0
[ 276.074922] 0x0
[ 276.074925] 0x0
[ 276.074928] 0x0
[ 276.074936] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 276.074941] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 276.074947] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 276.074950] SIMODE0[0x6c]
[ 276.074950] :(ENOVERRUN
[ 276.074950] |ENIOERR
[ 276.074950] |ENSELDI
[ 276.074951] |ENSELDO
[ 276.074951] )
[ 276.074954] CCSCBCTL[0x4]
[ 276.074954] :(CCSCBDIR
[ 276.074955] )
[ 276.074970] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 276.074986] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 276.075001] CDB 0 0 0 0 0 0
[ 276.075002] STACK:
[ 276.075007] 0x1f
[ 276.075012] 0x0
[ 276.075017] 0x0
[ 276.075022] 0x0
[ 276.075027] 0x0
[ 276.075032] 0x0
[ 276.075038] 0x0
[ 276.075043] 0x0
[ 276.075046]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 276.075069] scsi11: Received a Target Abort in CMC
[ 276.075094] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 276.075132] scsi11: Received split completion error message in OVLY
[ 276.397667] IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 276.407799] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 276.413003] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e80 flags=0x0050]
[ 276.418149] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001ec0 flags=0x0050]
[ 276.423267] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000018c0 flags=0x0050]
[ 276.428307] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f80 flags=0x0050]
[ 276.433265] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f00 flags=0x0050]
[ 276.438154] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001f40 flags=0x0050]
[ 276.442971] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001840 flags=0x0050]
[ 276.447709] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001880 flags=0x0050]
[ 276.452361] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001900 flags=0x0050]
[ 276.456949] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001980 flags=0x0050]
[ 276.461466] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000019c0 flags=0x0050]
[ 276.465906] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001940 flags=0x0050]
[ 276.470261] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a00 flags=0x0050]
[ 276.474523] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a40 flags=0x0050]
[ 276.478686] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001a80 flags=0x0050]
[ 276.482764] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001ac0 flags=0x0050]
[ 276.486765] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b00 flags=0x0050]
[ 276.490708] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b40 flags=0x0050]
[ 276.494635] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001b80 flags=0x0050]
[ 276.498484] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001bc0 flags=0x0050]
[ 276.502245] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c00 flags=0x0050]
[ 276.505983] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c40 flags=0x0050]
[ 276.509698] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001c80 flags=0x0050]
[ 276.513390] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001cc0 flags=0x0050]
[ 276.517017] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d00 flags=0x0050]
[ 276.520577] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d40 flags=0x0050]
[ 276.524111] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001d80 flags=0x0050]
[ 276.527605] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001dc0 flags=0x0050]
[ 276.531081] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e00 flags=0x0050]
[ 276.534530] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001e40 flags=0x0050]
[ 276.537943] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001fc0 flags=0x0050]
[ 296.875366] scsi 11:0:13:0: tag#0 Attempting to queue an ABORT message:
[ 296.878830] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 296.882837] scsi11: At time of recovery, card was paused
[ 296.886243] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x31 Mode 0x11
[ 296.893013] Card was paused
[ 296.896305] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 296.899655] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 296.903142] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 296.906641] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 296.910084] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 296.913523] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 296.916922] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 296.920353] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 296.923780] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 296.927231] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 296.930640] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 296.933993]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 296.940698] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 296.950687] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 296.960499] Kernel Free SCB list: 2 1 0
[ 296.963778] Sequencer Complete DMA-inprog list:
[ 296.967027] Sequencer Complete list:
[ 296.970225] Sequencer DMA-Up and Complete list:
[ 296.973405] Sequencer On QFreeze and Complete list:
[ 296.976559]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 296.985374] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 296.988547] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 296.991823] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 296.995182] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 296.998686] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 297.009321] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 297.013172] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 297.017130] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 297.021165] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 297.025349] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 297.033957] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 297.038365] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 297.042811] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 297.051773] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 297.056417] CCSCBCTL[0x4]:(CCSCBDIR)
[ 297.061089] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 297.065847] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 297.070692] CDB 0 0 0 0 0 0
[ 297.075535] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 297.085520] scsi11:0:13:0: Cmd aborted from QINFIFO
[ 297.090732] AMD-Vi: Event logged [
[ 297.090734] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 297.090769] scsi11: Received split completion error message in OVLY
[ 297.090769] scsi11: Count not complete in OVLY
[ 297.090772] scsi11: PCI error Interrupt
[ 297.090781] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 297.090781] Card was paused
[ 297.090784] INTSTAT[0x11]
[ 297.090784] :(SPLTINT
[ 297.090785] |PCIINT
[ 297.090785] )
[ 297.090788] SELOID[0x0]
[ 297.090788]
[ 297.090791] SELID[0x0]
[ 297.090792]
[ 297.090794] HS_MAILBOX[0x0]
[ 297.090794]
[ 297.090796] INTCTL[0x0]
[ 297.090797]
[ 297.090798] SEQINTSTAT[0x0]
[ 297.090799]
[ 297.090802] SAVED_MODE[0xff]
[ 297.090802]
[ 297.090805] DFFSTAT[0x33]
[ 297.090805] :(CURRFIFO_NONE
[ 297.090805] |FIFO0FREE
[ 297.090806] |FIFO1FREE
[ 297.090806] )
[ 297.090809] SCSISIGI[0x0]
[ 297.090809] :(P_DATAOUT
[ 297.090809] )
[ 297.090812] SCSIPHASE[0x0]
[ 297.090812]
[ 297.090815] SCSIBUS[0x0]
[ 297.090815]
[ 297.090818] LASTPHASE[0x1]
[ 297.090818] :(P_DATAOUT
[ 297.090819] |P_BUSFREE
[ 297.090819] )
[ 297.090822] SCSISEQ0[0x0]
[ 297.090822]
[ 297.090825] SCSISEQ1[0x12]
[ 297.090825] :(ENAUTOATNP
[ 297.090825] |ENRSELI
[ 297.090826] )
[ 297.090829] SEQCTL0[0x0]
[ 297.090829]
[ 297.090832] SEQINTCTL[0x0]
[ 297.090832]
[ 297.090835] SEQ_FLAGS[0x0]
[ 297.090835]
[ 297.090838] SEQ_FLAGS2[0x0]
[ 297.090838]
[ 297.090843] QFREEZE_COUNT[0x0]
[ 297.090843]
[ 297.090848] KERNEL_QFREEZE_COUNT[0x0]
[ 297.090848]
[ 297.090854] MK_MESSAGE_SCB[0xff00]
[ 297.090854]
[ 297.090857] MK_MESSAGE_SCSIID[0xff]
[ 297.090857]
[ 297.090860] SSTAT0[0x0]
[ 297.090860]
[ 297.090863] SSTAT1[0x0]
[ 297.090863]
[ 297.090866] SSTAT2[0x0]
[ 297.090866]
[ 297.090869] SSTAT3[0x0]
[ 297.090869]
[ 297.090872] PERRDIAG[0x0]
[ 297.090872]
[ 297.090875] SIMODE1[0xa4]
[ 297.090875] :(ENSCSIPERR
[ 297.090876] |ENSCSIRST
[ 297.090876] |ENSELTIMO
[ 297.090876] )
[ 297.090879] LQISTAT0[0x0]
[ 297.090879]
[ 297.090882] LQISTAT1[0x0]
[ 297.090882]
[ 297.090885] LQISTAT2[0x0]
[ 297.090885]
[ 297.090888] LQOSTAT0[0x0]
[ 297.090888]
[ 297.090891] LQOSTAT1[0x0]
[ 297.090891]
[ 297.090894] LQOSTAT2[0x0]
[ 297.090894]
[ 297.090914]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 297.090927] qinstart = 0 qinfifonext = 1
QINFIFO:
[ 297.090928] 0x3
[ 297.090929]
WAITING_TID_QUEUES:
[ 297.090949] Pending list:
[ 297.090952]
3 FIFO_USE[0x0]
[ 297.090955] SCB_CONTROL[0x0]
[ 297.090956]
[ 297.090959] SCB_SCSIID[0x0]
[ 297.090959]
[ 297.090959]
Total 1
[ 297.090959] Kernel Free SCB list:
[ 297.090959] 2
[ 297.090960] 1
[ 297.090960] 0
[ 297.090960] Sequencer Complete DMA-inprog list:
[ 297.090965] Sequencer Complete list:
[ 297.090971] Sequencer DMA-Up and Complete list:
[ 297.090976] Sequencer On QFreeze and Complete list:
[ 297.090995]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 297.090998] SEQIMODE[0x3f]
[ 297.090998] :(ENCFG4TCMD
[ 297.090999] |ENCFG4ICMD
[ 297.090999] |ENCFG4TSTAT
[ 297.090999] |ENCFG4ISTAT
[ 297.090999] |ENCFG4DATA
[ 297.091000] |ENSAVEPTRS
[ 297.091000] )
[ 297.091003] SEQINTSRC[0x0]
[ 297.091003]
[ 297.091006] DFCNTRL[0x0]
[ 297.091006]
[ 297.091009] DFSTATUS[0x89]
[ 297.091009] :(FIFOEMP
[ 297.091009] |HDONE
[ 297.091009] |PRELOAD_AVAIL
[ 297.091010] )
[ 297.091013] SG_CACHE_SHADOW[0x2]
[ 297.091013] :(LAST_SEG
[ 297.091013] )
[ 297.091016] SG_STATE[0x0]
[ 297.091016]
[ 297.091019] DFFSXFRCTL[0x0]
[ 297.091019]
[ 297.091022] SOFFCNT[0x0]
[ 297.091022]
[ 297.091025] MDFFSTAT[0x5]
[ 297.091025] :(FIFOFREE
[ 297.091025] |DLZERO
[ 297.091026] )
[ 297.091054] SHADDR = 0x00, SHCNT = 0x0
[ 297.091081] HADDR = 0x00, HCNT = 0x0
[ 297.091084] CCSGCTL[0x10]
[ 297.091084] :(SG_CACHE_AVAIL
[ 297.091084] )
[ 297.091095]
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 297.091098] SEQIMODE[0x3f]
[ 297.091098] :(ENCFG4TCMD
[ 297.091099] |ENCFG4ICMD
[ 297.091099] |ENCFG4TSTAT
[ 297.091099] |ENCFG4ISTAT
[ 297.091099] |ENCFG4DATA
[ 297.091100] |ENSAVEPTRS
[ 297.091100] )
[ 297.091103] SEQINTSRC[0x0]
[ 297.091103]
[ 297.091106] DFCNTRL[0x0]
[ 297.091106]
[ 297.091109] DFSTATUS[0x89]
[ 297.091109] :(FIFOEMP
[ 297.091109] |HDONE
[ 297.091109] |PRELOAD_AVAIL
[ 297.091110] )
[ 297.091113] SG_CACHE_SHADOW[0x2]
[ 297.091113] :(LAST_SEG
[ 297.091113] )
[ 297.091116] SG_STATE[0x0]
[ 297.091116]
[ 297.091119] DFFSXFRCTL[0x0]
[ 297.091119]
[ 297.091122] SOFFCNT[0x0]
[ 297.091122]
[ 297.091125] MDFFSTAT[0x5]
[ 297.091125] :(FIFOFREE
[ 297.091126] |DLZERO
[ 297.091126] )
[ 297.091154] SHADDR = 0x00, SHCNT = 0x0
[ 297.091181] HADDR = 0x00, HCNT = 0x0
[ 297.091184] CCSGCTL[0x10]
[ 297.091184] :(SG_CACHE_AVAIL
[ 297.091185] )
[ 297.091185]
LQIN:
[ 297.091188] 0x0
[ 297.091191] 0x0
[ 297.091194] 0x0
[ 297.091197] 0x0
[ 297.091200] 0x0
[ 297.091203] 0x0
[ 297.091206] 0x0
[ 297.091209] 0x0
[ 297.091212] 0x0
[ 297.091215] 0x0
[ 297.091218] 0x0
[ 297.091221] 0x0
[ 297.091224] 0x0
[ 297.091227] 0x0
[ 297.091230] 0x0
[ 297.091233] 0x0
[ 297.091236] 0x0
[ 297.091239] 0x0
[ 297.091242] 0x0
[ 297.091245] 0x0
[ 297.091253] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 297.091258] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 297.091263] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 297.091266] SIMODE0[0x6c]
[ 297.091267] :(ENOVERRUN
[ 297.091267] |ENIOERR
[ 297.091267] |ENSELDI
[ 297.091267] |ENSELDO
[ 297.091268] )
[ 297.091271] CCSCBCTL[0x4]
[ 297.091271] :(CCSCBDIR
[ 297.091272] )
[ 297.091288] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 297.091303] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 297.091319] CDB 0 0 0 0 0 0
[ 297.091319] STACK:
[ 297.091324] 0x1f
[ 297.091329] 0x0
[ 297.091334] 0x0
[ 297.091339] 0x0
[ 297.091344] 0x0
[ 297.091349] 0x0
[ 297.091354] 0x0
[ 297.091360] 0x0
[ 297.091363]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 297.091386] scsi11: Received a Target Abort in CMC
[ 297.091404] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 297.091441] scsi11: Received split completion error message in OVLY
[ 297.413829] IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 297.423944] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000020c0 flags=0x0050]
[ 297.429138] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002740 flags=0x0050]
[ 297.434273] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000027c0 flags=0x0050]
[ 297.439381] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002140 flags=0x0050]
[ 297.444412] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002300 flags=0x0050]
[ 297.449361] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002100 flags=0x0050]
[ 297.454242] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002380 flags=0x0050]
[ 297.459055] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000021c0 flags=0x0050]
[ 297.463788] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002400 flags=0x0050]
[ 297.468438] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002240 flags=0x0050]
[ 297.473019] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002480 flags=0x0050]
[ 297.477533] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000022c0 flags=0x0050]
[ 297.481972] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002500 flags=0x0050]
[ 297.486331] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002340 flags=0x0050]
[ 297.490597] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002580 flags=0x0050]
[ 297.494766] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000023c0 flags=0x0050]
[ 297.498852] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002600 flags=0x0050]
[ 297.502859] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002440 flags=0x0050]
[ 297.506811] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002680 flags=0x0050]
[ 297.510748] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000024c0 flags=0x0050]
[ 297.514612] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002700 flags=0x0050]
[ 297.518389] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002540 flags=0x0050]
[ 297.522139] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002780 flags=0x0050]
[ 297.525869] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000025c0 flags=0x0050]
[ 297.529578] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002180 flags=0x0050]
[ 297.533222] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002640 flags=0x0050]
[ 297.536802] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002200 flags=0x0050]
[ 297.540356] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x00000000000026c0 flags=0x0050]
[ 297.543872] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000002280 flags=0x0050]
[ 317.867960] scsi 11:0:14:0: tag#0 Attempting to queue an ABORT message:
[ 317.871518] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 317.875634] scsi11: At time of recovery, card was paused
[ 317.879225] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x31 Mode 0x11
[ 317.886653] Card was paused
[ 317.890280] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 317.893941] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 317.897710] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 317.901444] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 317.905154] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 317.908901] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 317.912656] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 317.916424] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 317.920164] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 317.923932] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 317.927675] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 317.931329]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 317.938440] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 317.949038] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 317.959514] Kernel Free SCB list: 2 1 0
[ 317.963014] Sequencer Complete DMA-inprog list:
[ 317.966491] Sequencer Complete list:
[ 317.969935] Sequencer DMA-Up and Complete list:
[ 317.973350] Sequencer On QFreeze and Complete list:
[ 317.976744]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 317.986562] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 317.989911] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 317.993226] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 317.996622] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 318.000162] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 318.010911] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 318.014798] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 318.018788] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 318.022853] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 318.027067] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 318.035732] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 318.040164] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 318.044636] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 318.053635] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 318.058296] CCSCBCTL[0x4]:(CCSCBDIR)
[ 318.062983] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 318.067760] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 318.072622] CDB 0 0 0 0 0 0
[ 318.077480] STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 318.087491] scsi11:0:14:0: Cmd aborted from QINFIFO
[ 318.092718] AMD-Vi: Event logged [
[ 318.092720] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 318.092756] scsi11: Received split completion error message in OVLY
[ 318.092757] scsi11: Count not complete in OVLY
[ 318.092760] scsi11: PCI error Interrupt
[ 318.092768] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x32 Mode 0x11
[ 318.092768] Card was paused
[ 318.092771] INTSTAT[0x11]
[ 318.092772] :(SPLTINT
[ 318.092772] |PCIINT
[ 318.092772] )
[ 318.092775] SELOID[0x0]
[ 318.092776]
[ 318.092778] SELID[0x0]
[ 318.092779]
[ 318.092782] HS_MAILBOX[0x0]
[ 318.092782]
[ 318.092784] INTCTL[0x0]
[ 318.092785]
[ 318.092787] SEQINTSTAT[0x0]
[ 318.092787]
[ 318.092790] SAVED_MODE[0xff]
[ 318.092791]
[ 318.092794] DFFSTAT[0x33]
[ 318.092794] :(CURRFIFO_NONE
[ 318.092794] |FIFO0FREE
[ 318.092794] |FIFO1FREE
[ 318.092795] )
[ 318.092797] SCSISIGI[0x0]
[ 318.092798] :(P_DATAOUT
[ 318.092798] )
[ 318.092801] SCSIPHASE[0x0]
[ 318.092801]
[ 318.092804] SCSIBUS[0x0]
[ 318.092804]
[ 318.092807] LASTPHASE[0x1]
[ 318.092807] :(P_DATAOUT
[ 318.092808] |P_BUSFREE
[ 318.092808] )
[ 318.092811] SCSISEQ0[0x0]
[ 318.092811]
[ 318.092814] SCSISEQ1[0x12]
[ 318.092814] :(ENAUTOATNP
[ 318.092814] |ENRSELI
[ 318.092814] )
[ 318.092817] SEQCTL0[0x0]
[ 318.092817]
[ 318.092820] SEQINTCTL[0x0]
[ 318.092820]
[ 318.092823] SEQ_FLAGS[0x0]
[ 318.092824]
[ 318.092826] SEQ_FLAGS2[0x0]
[ 318.092826]
[ 318.092832] QFREEZE_COUNT[0x0]
[ 318.092832]
[ 318.092837] KERNEL_QFREEZE_COUNT[0x0]
[ 318.092837]
[ 318.092842] MK_MESSAGE_SCB[0xff00]
[ 318.092842]
[ 318.092845] MK_MESSAGE_SCSIID[0xff]
[ 318.092845]
[ 318.092848] SSTAT0[0x0]
[ 318.092848]
[ 318.092851] SSTAT1[0x0]
[ 318.092851]
[ 318.092854] SSTAT2[0x0]
[ 318.092854]
[ 318.092857] SSTAT3[0x0]
[ 318.092857]
[ 318.092860] PERRDIAG[0x0]
[ 318.092860]
[ 318.092863] SIMODE1[0xa4]
[ 318.092863] :(ENSCSIPERR
[ 318.092863] |ENSCSIRST
[ 318.092864] |ENSELTIMO
[ 318.092864] )
[ 318.092867] LQISTAT0[0x0]
[ 318.092867]
[ 318.092870] LQISTAT1[0x0]
[ 318.092870]
[ 318.092873] LQISTAT2[0x0]
[ 318.092873]
[ 318.092876] LQOSTAT0[0x0]
[ 318.092876]
[ 318.092878] LQOSTAT1[0x0]
[ 318.092879]
[ 318.092882] LQOSTAT2[0x0]
[ 318.092882]
[ 318.092903]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 318.092916] qinstart = 0 qinfifonext = 1
QINFIFO:
[ 318.092917] 0x3
[ 318.092917]
WAITING_TID_QUEUES:
[ 318.092938] Pending list:
[ 318.092941]
3 FIFO_USE[0x0]
[ 318.092944] SCB_CONTROL[0x0]
[ 318.092944]
[ 318.092947] SCB_SCSIID[0x0]
[ 318.092948]
[ 318.092948]
Total 1
[ 318.092948] Kernel Free SCB list:
[ 318.092948] 2
[ 318.092948] 1
[ 318.092949] 0
[ 318.092949] Sequencer Complete DMA-inprog list:
[ 318.092954] Sequencer Complete list:
[ 318.092959] Sequencer DMA-Up and Complete list:
[ 318.092965] Sequencer On QFreeze and Complete list:
[ 318.092984]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 318.092987] SEQIMODE[0x3f]
[ 318.092987] :(ENCFG4TCMD
[ 318.092987] |ENCFG4ICMD
[ 318.092988] |ENCFG4TSTAT
[ 318.092988] |ENCFG4ISTAT
[ 318.092988] |ENCFG4DATA
[ 318.092988] |ENSAVEPTRS
[ 318.092989] )
[ 318.092992] SEQINTSRC[0x0]
[ 318.092992]
[ 318.092994] DFCNTRL[0x0]
[ 318.092995]
[ 318.092997] DFSTATUS[0x89]
[ 318.092998] :(FIFOEMP
[ 318.092998] |HDONE
[ 318.092998] |PRELOAD_AVAIL
[ 318.092998] )
[ 318.093001] SG_CACHE_SHADOW[0x2]
[ 318.093002] :(LAST_SEG
[ 318.093002] )
[ 318.093005] SG_STATE[0x0]
[ 318.093005]
[ 318.093008] DFFSXFRCTL[0x0]
[ 318.093008]
[ 318.093011] SOFFCNT[0x0]
[ 318.093011]
[ 318.093014] MDFFSTAT[0x5]
[ 318.093014] :(FIFOFREE
[ 318.093014] |DLZERO
[ 318.093014] )
[ 318.093042] SHADDR = 0x00, SHCNT = 0x0
[ 318.093071] HADDR = 0x00, HCNT = 0x0
[ 318.093074] CCSGCTL[0x10]
[ 318.093074] :(SG_CACHE_AVAIL
[ 318.093074] )
[ 318.093085]
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 318.093088] SEQIMODE[0x3f]
[ 318.093088] :(ENCFG4TCMD
[ 318.093088] |ENCFG4ICMD
[ 318.093089] |ENCFG4TSTAT
[ 318.093089] |ENCFG4ISTAT
[ 318.093089] |ENCFG4DATA
[ 318.093089] |ENSAVEPTRS
[ 318.093089] )
[ 318.093092] SEQINTSRC[0x0]
[ 318.093093]
[ 318.093095] DFCNTRL[0x0]
[ 318.093095]
[ 318.093098] DFSTATUS[0x89]
[ 318.093098] :(FIFOEMP
[ 318.093099] |HDONE
[ 318.093099] |PRELOAD_AVAIL
[ 318.093099] )
[ 318.093102] SG_CACHE_SHADOW[0x2]
[ 318.093102] :(LAST_SEG
[ 318.093103] )
[ 318.093106] SG_STATE[0x0]
[ 318.093106]
[ 318.093109] DFFSXFRCTL[0x0]
[ 318.093109]
[ 318.093112] SOFFCNT[0x0]
[ 318.093112]
[ 318.093115] MDFFSTAT[0x5]
[ 318.093115] :(FIFOFREE
[ 318.093115] |DLZERO
[ 318.093115] )
[ 318.093143] SHADDR = 0x00, SHCNT = 0x0
[ 318.093171] HADDR = 0x00, HCNT = 0x0
[ 318.093174] CCSGCTL[0x10]
[ 318.093174] :(SG_CACHE_AVAIL
[ 318.093174] )
[ 318.093174]
LQIN:
[ 318.093177] 0x0
[ 318.093180] 0x0
[ 318.093183] 0x0
[ 318.093186] 0x0
[ 318.093189] 0x0
[ 318.093192] 0x0
[ 318.093195] 0x0
[ 318.093198] 0x0
[ 318.093201] 0x0
[ 318.093204] 0x0
[ 318.093207] 0x0
[ 318.093210] 0x0
[ 318.093213] 0x0
[ 318.093216] 0x0
[ 318.093219] 0x0
[ 318.093222] 0x0
[ 318.093225] 0x0
[ 318.093228] 0x0
[ 318.093231] 0x0
[ 318.093234] 0x0
[ 318.093243] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 318.093248] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 318.093253] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 318.093256] SIMODE0[0x6c]
[ 318.093256] :(ENOVERRUN
[ 318.093256] |ENIOERR
[ 318.093257] |ENSELDI
[ 318.093257] |ENSELDO
[ 318.093257] )
[ 318.093261] CCSCBCTL[0x4]
[ 318.093261] :(CCSCBDIR
[ 318.093261] )
[ 318.093277] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 318.093293] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 318.093308] CDB 0 0 0 0 0 0
[ 318.093309] STACK:
[ 318.093314] 0x1f
[ 318.093319] 0x0
[ 318.093325] 0x0
[ 318.093329] 0x0
[ 318.093334] 0x0
[ 318.093339] 0x0
[ 318.093345] 0x0
[ 318.093350] 0x0
[ 318.093353]
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 318.093376] scsi11: Received a Target Abort in CMC
[ 318.093394] scsi11: PCI Split Interrupt - PCI-X status = 0x2e43
[ 318.093431] scsi11: Received split completion error message in OVLY
[ 318.093431] scsi11: Count not complete in OVLY
[ 318.421106] IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 318.431053] AMD-Vi: Event logged [IO_PAGE_FAULT device=0f:00.0 domain=0x0000 address=0x0000000000001800 flags=0x0050]
[ 338.860555] scsi 11:0:15:0: tag#0 Attempting to queue an ABORT message:
[ 338.865778] CDB: 0x12 0x0 0x0 0x0 0x24 0x0
[ 338.871541] scsi11: At time of recovery, card was paused
[ 338.876719] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi11: Dumping Card State at program address 0x1f Mode 0x11
[ 338.887144] Card was paused
[ 338.892293] INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
[ 338.897510] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0xff] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[ 338.902865] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
[ 338.908212] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
[ 338.913546] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
[ 338.918907] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
[ 338.924229] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
[ 338.929584] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0]
[ 338.934941] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[ 338.940346] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
[ 338.945765] LQOSTAT1[0x0] LQOSTAT2[0x0]
[ 338.951170]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
[ 338.961862] qinstart = 0 qinfifonext = 1
QINFIFO: 0x3
WAITING_TID_QUEUES:
[ 338.978015] Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0]
Total 1
[ 338.994138] Kernel Free SCB list: 2 1 0
[ 338.999571] Sequencer Complete DMA-inprog list:
[ 339.005037] Sequencer Complete list:
[ 339.010481] Sequencer DMA-Up and Complete list:
[ 339.015940] Sequencer On QFreeze and Complete list:
[ 339.021410]
scsi11: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[ 339.037645] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 339.043131] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 339.048620] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 339.054095] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 339.059630] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi11: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
[ 339.075938] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[ 339.081477] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[ 339.087022] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
[ 339.092553] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[ 339.098141] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[ 339.109245] scsi11: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[ 339.114786] scsi11: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[ 339.120329] scsi11: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[ 339.131321] SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO)
[ 339.136882] CCSCBCTL[0x4]:(CCSCBDIR)
[ 339.142412] scsi11: REG0 == 0x1, SINDEX = 0x1d, DINDEX = 0x0
[ 339.147964] scsi11: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
[ 339.153529] CDB 0 0 0 0 0 0
[ 339.159054] STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[ 339.170172] scsi11:0:15:0: Cmd aborted from QINFIFO
[ 339.462520] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 339.727734] systemd-journald[227]: Received SIGTERM from PID 1 (systemd).
[ 341.709901] device-mapper: uevent: version 1.0.3
[ 341.715189] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 343.214559] systemd-readahead[487]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 344.524738] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 345.434737] Warning: Processor Platform Limit event detected, but not handled.
[ 345.438280] Consider compiling CPUfreq support into your kernel.
[ 346.767962] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 346.889849] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 347.105077] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 347.109345] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 347.359962] EXT4-fs (sde1): mounting ext3 file system using the ext4 subsystem
[ 347.434386] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[ 347.785674] AVX version of gcm_enc/dec engaged.
[ 347.791776] AES CTR mode by8 optimization enabled
[ 347.974838] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 348.226290] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 348.382845] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 348.506675] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 348.515258] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 348.711216] EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 348.721177] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 348.743643] 3c59x: Donald Becker and others.
[ 348.750073] 0000:0a:04.0: 3Com PCI 3c905C Tornado at ffffc9000004c000.
[ 348.776222] EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 348.783564] 3c59x 0000:0a:04.0 eth1: renamed from eth0
[ 348.828113] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 348.949992] EXT4-fs (sdd5): mounting ext3 file system using the ext4 subsystem
[ 349.018993] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: (null)
[ 349.174161] EXT4-fs (sdd7): mounting ext3 file system using the ext4 subsystem
[ 349.224620] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: (null)
[ 349.252270] EXT4-fs (sdd6): mounting ext3 file system using the ext4 subsystem
[ 349.314817] EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem
[ 349.344081] EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: (null)
[ 349.381591] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 349.429847] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 349.436055] r8169 0000:11:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 349.442822] r8169 0000:11:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000005a000, 74:d4:35:1f:b2:9e, XID 0c900800 IRQ 33
[ 349.449081] r8169 0000:11:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 349.522150] dgap: module is from the staging directory, the quality is unknown, you have been warned.
[ 349.528601] dgap: dgap-1.3-16, Digi International Part Number 40002347_C
[ 349.534785] dgap: For the tools package please visit http://www.digi.com
[ 349.541100] dgap: dgap: board 0: AccelePort Xr920 8 port (rev 1), irq 34
[ 350.331558] [drm] Initialized drm 1.1.0 20060810
[ 350.869752] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 350.875841] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 8
[ 350.882171] xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[ 350.888485] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 350.894758] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 350.900949] usb usb8: Product: xHCI Host Controller
[ 350.907068] usb usb8: Manufacturer: Linux 4.4.0-lcrs xhci-hcd
[ 350.913210] usb usb8: SerialNumber: 0000:06:00.0
[ 350.919514] hub 8-0:1.0: USB hub found
[ 350.925728] hub 8-0:1.0: 2 ports detected
[ 350.931949] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 350.937941] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 9
[ 350.944129] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 350.950188] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 350.956175] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 350.962106] usb usb9: Product: xHCI Host Controller
[ 350.967978] usb usb9: Manufacturer: Linux 4.4.0-lcrs xhci-hcd
[ 350.973924] usb usb9: SerialNumber: 0000:06:00.0
[ 350.980019] hub 9-0:1.0: USB hub found
[ 350.985764] hub 9-0:1.0: 2 ports detected
[ 350.991615] xhci_hcd 0000:12:00.0: xHCI Host Controller
[ 350.997253] xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 10
[ 351.002992] xhci_hcd 0000:12:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[ 351.008849] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 351.014688] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 351.020481] usb usb10: Product: xHCI Host Controller
[ 351.026199] usb usb10: Manufacturer: Linux 4.4.0-lcrs xhci-hcd
[ 351.031857] usb usb10: SerialNumber: 0000:12:00.0
[ 351.037525] hub 10-0:1.0: USB hub found
[ 351.043292] hub 10-0:1.0: 2 ports detected
[ 351.048832] xhci_hcd 0000:12:00.0: xHCI Host Controller
[ 351.054247] xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 11
[ 351.059720] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
[ 351.065184] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[ 351.070595] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 351.075994] usb usb11: Product: xHCI Host Controller
[ 351.081321] usb usb11: Manufacturer: Linux 4.4.0-lcrs xhci-hcd
[ 351.086584] usb usb11: SerialNumber: 0000:12:00.0
[ 351.091921] hub 11-0:1.0: USB hub found
[ 351.097058] hub 11-0:1.0: 2 ports detected
[ 351.747043] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 351.752571] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 351.758052] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 351.763447] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 351.768864] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 351.774234] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 351.779506] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 351.784705] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 351.789813] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 351.812541] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 351.812621] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 351.812692] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 351.812765] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 351.812844] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 351.812930] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 351.813014] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 351.813101] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 352.868986] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 353.030488] Adding 8385532k swap on /dev/sda2. Priority:-1 extents:1 across:8385532k FS
[ 353.113745] nvidia: module license 'NVIDIA' taints kernel.
[ 353.118988] Disabling lock debugging due to kernel taint
[ 353.385235] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 353.390856] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 353.396355] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.131 Sun Nov 8 21:43:33 PST 2015
[ 353.426083] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 354.398231] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 354.667529] kvm: disabled by bios
[ 354.682383] kvm: disabled by bios
[ 354.694365] kvm: disabled by bios
[ 354.705366] kvm: disabled by bios
[ 354.716366] kvm: disabled by bios
[ 354.733353] kvm: disabled by bios
[ 354.747369] kvm: disabled by bios
[ 354.758354] kvm: disabled by bios
[ 433.445969] systemd-journald[490]: Received request to flush runtime journal from PID 1
[ 434.472301] systemd[1]: Unit apparmor.service entered failed state.
[ 434.487259] systemd[1]: Received SIGRTMIN+21 from PID 333 (plymouthd).
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <56957209.1080202-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-01-13 3:09 ` Baoquan He
[not found] ` <20160113030950.GB11902-0VdLhd/A9PlfpSRLqpFUpR/sF2h8X+2i0E9HWUfgJXw@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Baoquan He @ 2016-01-13 3:09 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Seems 0f:00.0 is not attached to a group so that it get a domain. Can
you also paste your "lspci -t" and "lspci -vvv" output? Here 0f:00.0
should be a pci bridge which need set the same domain with its
peripheral 0000:0f:04.0.
Please apply this patch and try again.
>From 6740bc427ddfeecc4b557fcb3ceb0832f73ab33a Mon Sep 17 00:00:00 2001
From: Baoquan He <bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Date: Wed, 13 Jan 2016 11:02:28 +0800
Subject: [PATCH] iommu/amd: Correct the wrong setting of alias DTE in
do_attach
In below commit Joerg tried to set alias DTE when its peripheral
is setting DTE. But there's a code bug here to wrongly set the
alias DTE, correct it in this patch.
commit e25bfb56ea7f046b71414e02f80f620deb5c6362
Author: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
Date: Tue Oct 20 17:33:38 2015 +0200
iommu/amd: Set alias DTE in do_attach/do_detach
Signed-off-by: Baoquan He <bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
drivers/iommu/amd_iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 8b2be1e..fc836f5 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1905,7 +1905,7 @@ static void do_attach(struct iommu_dev_data *dev_data,
/* Update device table */
set_dte_entry(dev_data->devid, domain, ats);
if (alias != dev_data->devid)
- set_dte_entry(dev_data->devid, domain, ats);
+ set_dte_entry(alias, domain, ats);
device_flush_dte(dev_data);
}
--
2.1.0
^ permalink raw reply related [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160113030950.GB11902-0VdLhd/A9PlfpSRLqpFUpR/sF2h8X+2i0E9HWUfgJXw@public.gmane.org>
@ 2016-01-13 14:42 ` Mark Hounschell
[not found] ` <56966244.80700-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-01-20 12:31 ` Joerg Roedel
1 sibling, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-01-13 14:42 UTC (permalink / raw)
To: Baoquan He; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
[-- Attachment #1: Type: text/plain, Size: 2288 bytes --]
On 01/12/2016 10:09 PM, Baoquan He wrote:
> Seems 0f:00.0 is not attached to a group so that it get a domain. Can
> you also paste your "lspci -t" and "lspci -vvv" output? Here 0f:00.0
> should be a pci bridge which need set the same domain with its
> peripheral 0000:0f:04.0.
>
> Please apply this patch and try again.
>
>
>>From 6740bc427ddfeecc4b557fcb3ceb0832f73ab33a Mon Sep 17 00:00:00 2001
> From: Baoquan He <bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Date: Wed, 13 Jan 2016 11:02:28 +0800
> Subject: [PATCH] iommu/amd: Correct the wrong setting of alias DTE in
> do_attach
>
> In below commit Joerg tried to set alias DTE when its peripheral
> is setting DTE. But there's a code bug here to wrongly set the
> alias DTE, correct it in this patch.
>
> commit e25bfb56ea7f046b71414e02f80f620deb5c6362
> Author: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
> Date: Tue Oct 20 17:33:38 2015 +0200
>
> iommu/amd: Set alias DTE in do_attach/do_detach
>
> Signed-off-by: Baoquan He <bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> ---
> drivers/iommu/amd_iommu.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> index 8b2be1e..fc836f5 100644
> --- a/drivers/iommu/amd_iommu.c
> +++ b/drivers/iommu/amd_iommu.c
> @@ -1905,7 +1905,7 @@ static void do_attach(struct iommu_dev_data *dev_data,
> /* Update device table */
> set_dte_entry(dev_data->devid, domain, ats);
> if (alias != dev_data->devid)
> - set_dte_entry(dev_data->devid, domain, ats);
> + set_dte_entry(alias, domain, ats);
>
> device_flush_dte(dev_data);
> }
>
First, attached are the 2 lspci outputs you asked for.
After the patch I was still unable to bring the system up but it was
much better. 2 of the 8 Sata disks do not come up. If I remove those
from my fstab the box comes up with the patch.
This MB has 8 internal Sata ports. Six hanging off the South-Bridge
(SB950) and two more hanging off Marvell 88SE9172 chips connected to
the 990FX chipset. I'm pretty sure the 2 disks that don't come up are
the 2 hanging off the Marvell chips. I will have to take the box apart
to verify and will if you need me to. And again, all works fine with the
IOMMU disabled in the BIOS.
Regards
Mark
[-- Attachment #2: lspci-t.txt --]
[-- Type: text/plain, Size: 1600 bytes --]
-[0000:00]-+-00.0
+-00.2
+-02.0-[01]----00.0
+-04.0-[02-05]----00.0-[03-05]----04.0-[04-05]--+-04.0
| +-05.0
| +-06.0
| +-07.0
| +-08.0-[05]----00.0
| +-09.0
| \-0a.0
+-09.0-[06]----00.0
+-0a.0-[07]----00.0
+-0b.0-[08-0d]----00.0-[09-0d]----04.0-[0a-0d]--+-04.0
| +-05.0
| +-06.0-[0b]----00.0
| +-07.0-[0c]----00.0
| +-08.0-[0d]----00.0
| +-09.0
| \-0a.0
+-0d.0-[0e-0f]----00.0-[0f]----04.0
+-11.0
+-12.0
+-12.2
+-13.0
+-13.2
+-14.0
+-14.1
+-14.2
+-14.3
+-14.4-[10]----06.0
+-14.5
+-15.0-[11]----00.0
+-15.1-[12]----00.0
+-15.2-[13]----00.0
+-16.0
+-16.2
+-18.0
+-18.1
+-18.2
+-18.3
+-18.4
\-18.5
[-- Attachment #3: lspci-vvv.txt --]
[-- Type: text/plain, Size: 84783 bytes --]
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=20 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b+
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: [e]
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [9c] HyperTransport: #1a
Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-
Address: 00000000 Data: 0000
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD/ATI] RD990 I/O Memory Management Unit (IOMMU)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD990 I/O Memory Management Unit (IOMMU)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 26
Capabilities: [40] Secure device <?>
Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000feeff00c Data: 4142
Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: d9000000-db0fffff
Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
I/O behind bridge: 00006000-00007fff
Memory behind bridge: db800000-dd9fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #4, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: de100000-de1fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #9, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: de000000-de0fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #10, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0b.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (NB-SB link) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=0d, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d0000000-d87fffff
Prefetchable memory behind bridge: 00000000c4000000-00000000c6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #11, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0d.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port B) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=0f, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ddb00000-ddcfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #13, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd Device b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f090 [size=8]
Region 1: I/O ports at f080 [size=4]
Region 2: I/O ports at f070 [size=8]
Region 3: I/O ports at f060 [size=4]
Region 4: I/O ports at f050 [size=16]
Region 5: Memory at d880b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d880a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d8809000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d8808000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d8807000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) (prog-if 8a [Master SecP PriP])
Subsystem: Gigabyte Technology Co., Ltd Device 5002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, pata_acpi, ata_generic
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Gigabyte Technology Co., Ltd Device a132
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d8800000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=10, subordinate=10, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: ddf00000-ddffffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d8806000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=11, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000c7000000-00000000c70fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=12, subordinate=12, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: dde00000-ddefffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=13, subordinate=13, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: ddd00000-dddfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d8805000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d8804000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b+
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 3.00
Link Frequency: [e]
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller: NVIDIA Corporation G70 [GeForce 7800 GT] (rev a1) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. Device c517
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at da000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d9000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at db000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nouveau, nvidia
02:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI Express-to-PCI Bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=05, sec-latency=32
I/O behind bridge: 00006000-00007fff
Memory behind bridge: db800000-dd9fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [80] Subsystem: Device 0000:0000
Capabilities: [90] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0
ExtTag- AttnBtn- AttnInd- PwrInd- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel modules: shpchp
03:04.0 PCI bridge: Pericom Semiconductor PCI to PCI Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Bus: primary=03, secondary=04, subordinate=05, sec-latency=32
I/O behind bridge: 00006000-00007fff
Memory behind bridge: db800000-dd9fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Slot ID: 0 slots, First-, chassis 00
Kernel modules: shpchp
04:04.0 Intelligent controller [0e80]: PLX Technology, Inc. Device 0480 (rev 55)
Subsystem: Compro Computer Services, Inc. Device 4620
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
BIST result: 00
Region 0: Memory at dd909000 (32-bit, non-prefetchable) [size=1K]
Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=8M]
Region 2: Memory at dd908000 (32-bit, non-prefetchable) [size=16]
Capabilities: [40] #00 [0000]
Capabilities: [54] #00 [0080]
Capabilities: [58] Vital Product Data
Unknown large resource type 48, will not decode more.
Kernel driver in use: gpiohsd
Kernel modules: gpiohsd
04:05.0 Intelligent controller [0e80]: PLX Technology, Inc. Device 0480 (rev 55)
Subsystem: Compro Computer Services, Inc. Device 4620
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 39
BIST result: 00
Region 0: Memory at dd907000 (32-bit, non-prefetchable) [size=1K]
Region 1: Memory at dc800000 (32-bit, non-prefetchable) [size=8M]
Region 2: Memory at dd906000 (32-bit, non-prefetchable) [size=16]
Capabilities: [40] #00 [0000]
Capabilities: [54] #00 [0080]
Capabilities: [58] Vital Product Data
Unknown large resource type 48, will not decode more.
Kernel driver in use: gpiohsd
Kernel modules: gpiohsd
04:06.0 Intelligent controller [0e80]: PLX Technology, Inc. Device 0480 (rev 55)
Subsystem: Compro Computer Services, Inc. Device 4620
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
BIST result: 00
Region 0: Memory at dd905000 (32-bit, non-prefetchable) [size=1K]
Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=8M]
Region 2: Memory at dd904000 (32-bit, non-prefetchable) [size=16]
Capabilities: [40] #00 [0000]
Capabilities: [54] #00 [0080]
Capabilities: [58] Vital Product Data
Unknown large resource type 48, will not decode more.
Kernel driver in use: gpiohsd
Kernel modules: gpiohsd
04:07.0 Intelligent controller [0e80]: PLX Technology, Inc. Device 0480 (rev 55)
Subsystem: Compro Computer Services, Inc. Device 4620
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
BIST result: 00
Region 0: Memory at dd903000 (32-bit, non-prefetchable) [size=1K]
Region 1: Memory at db800000 (32-bit, non-prefetchable) [size=8M]
Region 2: Memory at dd902000 (32-bit, non-prefetchable) [size=16]
Capabilities: [40] #00 [0000]
Capabilities: [54] #00 [0080]
Capabilities: [58] Vital Product Data
Unknown large resource type 48, will not decode more.
Kernel driver in use: gpiohsd
Kernel modules: gpiohsd
04:08.0 PCI bridge: Hint Corp HiNT HB4 PCI-PCI Bridge (PCI6150) (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 00006000-00006fff
Memory behind bridge: dd800000-dd8fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [e4] CompactPCI hot-swap <?>
Capabilities: [e8] Vital Product Data
Unknown small resource type 00, will not decode more.
Kernel modules: shpchp
04:09.0 Serial controller: PLX Technology, Inc. PCI9030 32-bit 33MHz PCI <-> IOBus Bridge (prog-if 02 [16550])
Subsystem: Perle Systems Ltd Device 0041
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 39
Region 0: Memory at dd901000 (32-bit, non-prefetchable) [size=128]
Region 1: I/O ports at 7180 [size=128]
Region 2: I/O ports at 7100 [size=128]
Kernel driver in use: perle-serial
Kernel modules: perle_serial
04:0a.0 Memory controller: Compro Computer Services, Inc. Device 4360 (rev 4d)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at dd900000 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at 7000 [size=256]
Region 2: Memory at c0000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at dd90a000 [disabled] [size=2K]
Kernel driver in use: eprm
Kernel modules: eprm
05:00.0 Unassigned class [ff00]: Compro Computer Services, Inc. Device 0100 (rev 31)
Subsystem: Compro Computer Services, Inc. Device 4700
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 34
Region 0: Memory at dd80a000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at dd808000 (32-bit, non-prefetchable) [size=8K]
Region 2: Memory at dd800000 (32-bit, non-prefetchable) [size=32K]
Region 5: I/O ports at 0000
Kernel driver in use: iom
Kernel modules: pciiom
06:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5007
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
Region 0: Memory at de100000 (64-bit, non-prefetchable) [size=32K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable+ Count=1/4 Maskable+ 64bit+
Address: 00000000feeff00c Data: 4183
Masking: 0000000e Pending: 00000000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [190 v1] Device Serial Number 01-01-01-01-01-01-01-01
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd Device b000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: I/O ports at d040 [size=8]
Region 1: I/O ports at d030 [size=4]
Region 2: I/O ports at d020 [size=8]
Region 3: I/O ports at d010 [size=4]
Region 4: I/O ports at d000 [size=16]
Region 5: Memory at de010000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at de000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: feeff00c Data: 41a2
Capabilities: [70] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: ahci
08:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI Express-to-PCI Bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=08, secondary=09, subordinate=0d, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d0000000-d87fffff
Prefetchable memory behind bridge: 00000000c4000000-00000000c6ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [80] Subsystem: Device 0000:0000
Capabilities: [90] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0
ExtTag- AttnBtn- AttnInd- PwrInd- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel modules: shpchp
09:04.0 PCI bridge: Pericom Semiconductor PCI to PCI Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Bus: primary=09, secondary=0a, subordinate=0d, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d0000000-d87fffff
Prefetchable memory behind bridge: 00000000c4000000-00000000c6ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Slot ID: 0 slots, First-, chassis 00
Kernel modules: shpchp
0a:04.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at c200 [size=128]
Region 1: Memory at d8743000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at d8700000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: 3c59x
Kernel modules: 3c59x
0a:05.0 Network controller: VMIC GE-IP PCI5565,PMC5565 Reflective Memory Node (rev 01)
Subsystem: PLX Technology, Inc. Device 9656
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at d8742000 (32-bit, non-prefetchable) [size=512]
Region 1: I/O ports at c100 [size=256]
Region 2: Memory at d8741000 (32-bit, non-prefetchable) [size=64]
Region 3: Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
Capabilities: [40] Power Management version 0
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] #00 [0080]
Kernel driver in use: rfm2g
Kernel modules: rfm2g
0a:06.0 PCI bridge: Hint Corp HiNT HB4 PCI-PCI Bridge (PCI6150) (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d8600000-d86fffff
Prefetchable memory behind bridge: 00000000c6000000-00000000c6ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [e4] CompactPCI hot-swap <?>
Capabilities: [e8] Vital Product Data
No end tag found
Kernel modules: shpchp
0a:07.0 PCI bridge: Hint Corp HiNT HB4 PCI-PCI Bridge (PCI6150) (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Bus: primary=0a, secondary=0c, subordinate=0c, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d8500000-d85fffff
Prefetchable memory behind bridge: 00000000c5000000-00000000c5ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [e4] CompactPCI hot-swap <?>
Capabilities: [e8] Vital Product Data
No end tag found
Kernel modules: shpchp
0a:08.0 PCI bridge: Hint Corp HiNT HB4 PCI-PCI Bridge (PCI6150) (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Bus: primary=0a, secondary=0d, subordinate=0d, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d8400000-d84fffff
Prefetchable memory behind bridge: 00000000c4000000-00000000c4ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [e4] CompactPCI hot-swap <?>
Capabilities: [e8] Vital Product Data
No end tag found
Kernel modules: shpchp
0a:09.0 Communication controller: Digi International AccelePort Xr 920 (rev 01)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 35
Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=4M]
Expansion ROM at d8730000 [size=64K]
Kernel driver in use: dgap
Kernel modules: dgap
0a:0a.0 SCSI storage controller: Adaptec AHA-2930CU (rev 03)
Subsystem: Adaptec Device 3869
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
Region 0: I/O ports at c000 [disabled] [size=256]
Region 1: Memory at d8740000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at d8720000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: aic7xxx
Kernel modules: aic7xxx
0b:00.0 Unassigned class [ff00]: Compro Computer Services, Inc. Device 4710 (rev 41)
Subsystem: Compro Computer Services, Inc. Device 4710
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 33
Region 0: Memory at d8600000 (32-bit, non-prefetchable) [size=512]
Region 1: Memory at c6000000 (32-bit, prefetchable) [size=16M]
Capabilities: [80] Vital Product Data
Unknown small resource type 00, will not decode more.
Kernel driver in use: gpiohsd
Kernel modules: gpiohsd
0c:00.0 Unassigned class [ff00]: Compro Computer Services, Inc. Device 4710 (rev 41)
Subsystem: Compro Computer Services, Inc. Device 4710
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d8500000 (32-bit, non-prefetchable) [size=512]
Region 1: Memory at c5000000 (32-bit, prefetchable) [size=16M]
Capabilities: [80] Vital Product Data
Unknown small resource type 00, will not decode more.
Kernel driver in use: gpiohsd
Kernel modules: gpiohsd
0d:00.0 Unassigned class [ff00]: Compro Computer Services, Inc. Device 4710 (rev 41)
Subsystem: Compro Computer Services, Inc. Device 4710
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d8400000 (32-bit, non-prefetchable) [size=512]
Region 1: Memory at c4000000 (32-bit, prefetchable) [size=16M]
Capabilities: [80] Vital Product Data
Unknown small resource type 00, will not decode more.
Kernel driver in use: gpiohsd
Kernel modules: gpiohsd
0e:00.0 PCI bridge: PLX Technology, Inc. PEX 8114 PCI Express-to-PCI/PCI-X Bridge (rev bc) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at ddc00000 (32-bit, non-prefetchable) [size=8K]
Bus: primary=0e, secondary=0f, subordinate=0f, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ddb00000-ddbfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 3
Flags: PMEClk+ DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [58] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=0e:00.0 64bit- 133MHz- SCD- USC- SCO+ SRD-
Upstream: Capacity=16 CommitmentLimit=16
Downstream: Capacity=16 CommitmentLimit=16
Capabilities: [68] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
MaxPayload 128 bytes, MaxReadReq 2048 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <2us, L1 <32us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Device Serial Number 00-00-00-01-00-00-0e-df
Capabilities: [fb4 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [138 v1] Power Budgeting <?>
Capabilities: [148 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Kernel modules: shpchp
0f:04.0 SCSI storage controller: Adaptec ASC-29320ALP U320 (rev 10)
Subsystem: Adaptec ASC-29320LPE PCIe U320
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: I/O ports at b100 [disabled] [size=256]
Region 1: Memory at ddb80000 (64-bit, non-prefetchable) [size=8K]
Region 3: I/O ports at b000 [disabled] [size=256]
Expansion ROM at ddb00000 [disabled] [size=512K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] MSI: Enable- Count=1/2 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [94] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=2048 OST=8
Status: Dev=0f:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=64 RSCEM- 266MHz- 533MHz-
Kernel driver in use: aic79xx
Kernel modules: aic79xx
10:06.0 Unassigned class [ff00]: Compro Computer Services, Inc. PCI RTOM (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at a000 [size=64]
Region 1: Memory at ddf00000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: rtom
Kernel modules: rtom
11:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at 9000 [size=256]
Region 2: Memory at c7004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at c7000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000feeff00c Data: 41c3
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
12:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd Device 5007
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 38
Region 0: Memory at dde00000 (64-bit, non-prefetchable) [size=32K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable+ Count=1/4 Maskable+ 64bit+
Address: 00000000feeff00c Data: 4193
Masking: 0000000e Pending: 00000000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [190 v1] Device Serial Number 01-01-01-01-01-01-01-01
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
13:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd Device b000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: I/O ports at 8040 [size=8]
Region 1: I/O ports at 8030 [size=4]
Region 2: I/O ports at 8020 [size=8]
Region 3: I/O ports at 8010 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at ddd10000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at ddd00000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: feeff00c Data: 41c2
Capabilities: [70] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: ahci
[-- Attachment #4: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <56966244.80700-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-01-14 0:05 ` Baoquan He
[not found] ` <20160114000520.GA2449-ejN7fcUYdH/by3iVrkZq2A@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Baoquan He @ 2016-01-14 0:05 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/13/16 at 09:42am, Mark Hounschell wrote:
> First, attached are the 2 lspci outputs you asked for.
>
> After the patch I was still unable to bring the system up but it was
> much better. 2 of the 8 Sata disks do not come up. If I remove those
> from my fstab the box comes up with the patch.
>
> This MB has 8 internal Sata ports. Six hanging off the South-Bridge
> (SB950) and two more hanging off Marvell 88SE9172 chips connected
> to the 990FX chipset. I'm pretty sure the 2 disks that don't come
> up are the 2 hanging off the Marvell chips. I will have to take the
> box apart to verify and will if you need me to. And again, all works
> fine with the IOMMU disabled in the BIOS.
OK, it means the alias dev table entry is correctly set. I checked the
boot log again and found some interrupt related info. Can you paste the
boot log which 2 of the 8 sata disks didn't come up with my patch
applied. And could you tell the pci id of those 2 sata disks, then I
don't need to find them one by one.
>
>
>
> -[0000:00]-+-00.0
> +-00.2
> +-02.0-[01]----00.0
> +-04.0-[02-05]----00.0-[03-05]----04.0-[04-05]--+-04.0
> | +-05.0
> | +-06.0
> | +-07.0
> | +-08.0-[05]----00.0
> | +-09.0
> | \-0a.0
> +-09.0-[06]----00.0
> +-0a.0-[07]----00.0
> +-0b.0-[08-0d]----00.0-[09-0d]----04.0-[0a-0d]--+-04.0
> | +-05.0
> | +-06.0-[0b]----00.0
> | +-07.0-[0c]----00.0
> | +-08.0-[0d]----00.0
> | +-09.0
> | \-0a.0
> +-0d.0-[0e-0f]----00.0-[0f]----04.0
> +-11.0
> +-12.0
> +-12.2
> +-13.0
> +-13.2
> +-14.0
> +-14.1
> +-14.2
> +-14.3
> +-14.4-[10]----06.0
> +-14.5
> +-15.0-[11]----00.0
> +-15.1-[12]----00.0
> +-15.2-[13]----00.0
> +-16.0
> +-16.2
> +-18.0
> +-18.1
> +-18.2
> +-18.3
> +-18.4
> \-18.5
> 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
> Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B)
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [c4] HyperTransport: Slave or Primary Interface
> Command: BaseUnitID=0 UnitCnt=20 MastHost- DefDir- DUL-
> Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b+
> Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
> Revision ID: 3.00
> Link Frequency 0: [e]
> Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD-
> Link Frequency 1: 200MHz
> Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> Prefetchable memory behind bridge Upper: 00-00
> Bus Number: 00
> Capabilities: [40] HyperTransport: Retry Mode
> Capabilities: [54] HyperTransport: UnitID Clumping
> Capabilities: [9c] HyperTransport: #1a
> Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-
> Address: 00000000 Data: 0000
>
> 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD/ATI] RD990 I/O Memory Management Unit (IOMMU)
> Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD990 I/O Memory Management Unit (IOMMU)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 26
> Capabilities: [40] Secure device <?>
> Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Address: 00000000feeff00c Data: 4142
> Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+
>
> 00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: d9000000-db0fffff
> Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0
> ExtTag+ RBE+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Capabilities: [190 v1] Access Control Services
> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
> ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
> I/O behind bridge: 00006000-00007fff
> Memory behind bridge: db800000-dd9fffff
> Prefetchable memory behind bridge: 00000000c0000000-00000000c3ffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0
> ExtTag+ RBE+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> Slot #4, PowerLimit 75.000W; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Capabilities: [190 v1] Access Control Services
> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
> ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: de100000-de1fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0
> ExtTag+ RBE+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #1, Speed 5GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> Slot #9, PowerLimit 75.000W; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Capabilities: [190 v1] Access Control Services
> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
> ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: de000000-de0fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0
> ExtTag+ RBE+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #2, Speed 5GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> Slot #10, PowerLimit 75.000W; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Capabilities: [190 v1] Access Control Services
> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
> ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:0b.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (NB-SB link) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=08, subordinate=0d, sec-latency=0
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: d0000000-d87fffff
> Prefetchable memory behind bridge: 00000000c4000000-00000000c6ffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0
> ExtTag+ RBE+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> Slot #11, PowerLimit 75.000W; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Capabilities: [190 v1] Access Control Services
> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
> ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:0d.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port B) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=0e, subordinate=0f, sec-latency=0
> I/O behind bridge: 0000b000-0000bfff
> Memory behind bridge: ddb00000-ddcfffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0
> ExtTag+ RBE+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <1us, L1 <8us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> Slot #13, PowerLimit 75.000W; Interlock- NoCompl+
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Capabilities: [190 v1] Access Control Services
> ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
> ACSCtl: SrcValid+ TransBlk- ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
> Subsystem: Gigabyte Technology Co., Ltd Device b002
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 19
> Region 0: I/O ports at f090 [size=8]
> Region 1: I/O ports at f080 [size=4]
> Region 2: I/O ports at f070 [size=8]
> Region 3: I/O ports at f060 [size=4]
> Region 4: I/O ports at f050 [size=16]
> Region 5: Memory at d880b000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [70] SATA HBA v1.0 InCfgSpace
> Capabilities: [a4] PCI Advanced Features
> AFCap: TP+ FLR+
> AFCtrl: FLR-
> AFStatus: TP-
> Kernel driver in use: ahci
>
> 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
> Subsystem: Gigabyte Technology Co., Ltd Device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at d880a000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci-pci
> Kernel modules: ohci_pci
>
> 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
> Subsystem: Gigabyte Technology Co., Ltd Device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at d8809000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [e4] Debug port: BAR=1 offset=00e0
> Kernel driver in use: ehci-pci
>
> 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
> Subsystem: Gigabyte Technology Co., Ltd Device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at d8808000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci-pci
> Kernel modules: ohci_pci
>
> 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
> Subsystem: Gigabyte Technology Co., Ltd Device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at d8807000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [e4] Debug port: BAR=1 offset=00e0
> Kernel driver in use: ehci-pci
>
> 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
> Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Kernel driver in use: piix4_smbus
> Kernel modules: i2c_piix4
>
> 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) (prog-if 8a [Master SecP PriP])
> Subsystem: Gigabyte Technology Co., Ltd Device 5002
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin B routed to IRQ 17
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374
> Region 4: I/O ports at f000 [size=16]
> Kernel driver in use: pata_atiixp
> Kernel modules: pata_atiixp, pata_acpi, ata_generic
>
> 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
> Subsystem: Gigabyte Technology Co., Ltd Device a132
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at d8800000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: snd_hda_intel
> Kernel modules: snd_hda_intel
>
> 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
> Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Bus: primary=00, secondary=10, subordinate=10, sec-latency=64
> I/O behind bridge: 0000a000-0000afff
> Memory behind bridge: ddf00000-ddffffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
> Subsystem: Gigabyte Technology Co., Ltd Device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at d8806000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci-pci
> Kernel modules: ohci_pci
>
> 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=11, subordinate=11, sec-latency=0
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000c7000000-00000000c70fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0
> ExtTag+ RBE+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=12, subordinate=12, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: dde00000-ddefffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0
> ExtTag+ RBE+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 2) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=13, subordinate=13, sec-latency=0
> I/O behind bridge: 00008000-00008fff
> Memory behind bridge: ddd00000-dddfffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0
> ExtTag+ RBE+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
> ClockPM- Surprise- LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000
> Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
> Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
> Subsystem: Gigabyte Technology Co., Ltd Device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at d8805000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci-pci
> Kernel modules: ohci_pci
>
> 00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
> Subsystem: Gigabyte Technology Co., Ltd Device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at d8804000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [e4] Debug port: BAR=1 offset=00e0
> Kernel driver in use: ehci-pci
>
> 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b+
> Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> Revision ID: 3.00
> Link Frequency: [e]
> Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
> Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
>
> 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: [f0] Secure device <?>
> Kernel driver in use: k10temp
> Kernel modules: k10temp
>
> 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Kernel driver in use: fam15h_power
> Kernel modules: fam15h_power
>
> 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 01:00.0 VGA compatible controller: NVIDIA Corporation G70 [GeForce 7800 GT] (rev a1) (prog-if 00 [VGA controller])
> Subsystem: eVga.com. Corp. Device c517
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 43
> Region 0: Memory at da000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
> Region 3: Memory at d9000000 (64-bit, non-prefetchable) [size=16M]
> Region 5: I/O ports at e000 [size=128]
> [virtual] Expansion ROM at db000000 [disabled] [size=128K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [78] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> Status: NegoPending- InProgress-
> Capabilities: [128 v1] Power Budgeting <?>
> Kernel driver in use: nvidia
> Kernel modules: nvidiafb, nouveau, nvidia
>
> 02:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI Express-to-PCI Bridge (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=02, secondary=03, subordinate=05, sec-latency=32
> I/O behind bridge: 00006000-00007fff
> Memory behind bridge: db800000-dd9fffff
> Prefetchable memory behind bridge: 00000000c0000000-00000000c3ffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [80] Subsystem: Device 0000:0000
> Capabilities: [90] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> Kernel modules: shpchp
>
> 03:04.0 PCI bridge: Pericom Semiconductor PCI to PCI Bridge (rev 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Bus: primary=03, secondary=04, subordinate=05, sec-latency=32
> I/O behind bridge: 00006000-00007fff
> Memory behind bridge: db800000-dd9fffff
> Prefetchable memory behind bridge: 00000000c0000000-00000000c3ffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] Slot ID: 0 slots, First-, chassis 00
> Kernel modules: shpchp
>
> 04:04.0 Intelligent controller [0e80]: PLX Technology, Inc. Device 0480 (rev 55)
> Subsystem: Compro Computer Services, Inc. Device 4620
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 34
> BIST result: 00
> Region 0: Memory at dd909000 (32-bit, non-prefetchable) [size=1K]
> Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=8M]
> Region 2: Memory at dd908000 (32-bit, non-prefetchable) [size=16]
> Capabilities: [40] #00 [0000]
> Capabilities: [54] #00 [0080]
> Capabilities: [58] Vital Product Data
> Unknown large resource type 48, will not decode more.
> Kernel driver in use: gpiohsd
> Kernel modules: gpiohsd
>
> 04:05.0 Intelligent controller [0e80]: PLX Technology, Inc. Device 0480 (rev 55)
> Subsystem: Compro Computer Services, Inc. Device 4620
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 39
> BIST result: 00
> Region 0: Memory at dd907000 (32-bit, non-prefetchable) [size=1K]
> Region 1: Memory at dc800000 (32-bit, non-prefetchable) [size=8M]
> Region 2: Memory at dd906000 (32-bit, non-prefetchable) [size=16]
> Capabilities: [40] #00 [0000]
> Capabilities: [54] #00 [0080]
> Capabilities: [58] Vital Product Data
> Unknown large resource type 48, will not decode more.
> Kernel driver in use: gpiohsd
> Kernel modules: gpiohsd
>
> 04:06.0 Intelligent controller [0e80]: PLX Technology, Inc. Device 0480 (rev 55)
> Subsystem: Compro Computer Services, Inc. Device 4620
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 40
> BIST result: 00
> Region 0: Memory at dd905000 (32-bit, non-prefetchable) [size=1K]
> Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=8M]
> Region 2: Memory at dd904000 (32-bit, non-prefetchable) [size=16]
> Capabilities: [40] #00 [0000]
> Capabilities: [54] #00 [0080]
> Capabilities: [58] Vital Product Data
> Unknown large resource type 48, will not decode more.
> Kernel driver in use: gpiohsd
> Kernel modules: gpiohsd
>
> 04:07.0 Intelligent controller [0e80]: PLX Technology, Inc. Device 0480 (rev 55)
> Subsystem: Compro Computer Services, Inc. Device 4620
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 29
> BIST result: 00
> Region 0: Memory at dd903000 (32-bit, non-prefetchable) [size=1K]
> Region 1: Memory at db800000 (32-bit, non-prefetchable) [size=8M]
> Region 2: Memory at dd902000 (32-bit, non-prefetchable) [size=16]
> Capabilities: [40] #00 [0000]
> Capabilities: [54] #00 [0080]
> Capabilities: [58] Vital Product Data
> Unknown large resource type 48, will not decode more.
> Kernel driver in use: gpiohsd
> Kernel modules: gpiohsd
>
> 04:08.0 PCI bridge: Hint Corp HiNT HB4 PCI-PCI Bridge (PCI6150) (rev 04) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
> I/O behind bridge: 00006000-00006fff
> Memory behind bridge: dd800000-dd8fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
> Capabilities: [e4] CompactPCI hot-swap <?>
> Capabilities: [e8] Vital Product Data
> Unknown small resource type 00, will not decode more.
> Kernel modules: shpchp
>
> 04:09.0 Serial controller: PLX Technology, Inc. PCI9030 32-bit 33MHz PCI <-> IOBus Bridge (prog-if 02 [16550])
> Subsystem: Perle Systems Ltd Device 0041
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 39
> Region 0: Memory at dd901000 (32-bit, non-prefetchable) [size=128]
> Region 1: I/O ports at 7180 [size=128]
> Region 2: I/O ports at 7100 [size=128]
> Kernel driver in use: perle-serial
> Kernel modules: perle_serial
>
> 04:0a.0 Memory controller: Compro Computer Services, Inc. Device 4360 (rev 4d)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 40
> Region 0: Memory at dd900000 (32-bit, non-prefetchable) [size=256]
> Region 1: I/O ports at 7000 [size=256]
> Region 2: Memory at c0000000 (32-bit, non-prefetchable) [size=64M]
> Expansion ROM at dd90a000 [disabled] [size=2K]
> Kernel driver in use: eprm
> Kernel modules: eprm
>
> 05:00.0 Unassigned class [ff00]: Compro Computer Services, Inc. Device 0100 (rev 31)
> Subsystem: Compro Computer Services, Inc. Device 4700
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 34
> Region 0: Memory at dd80a000 (32-bit, non-prefetchable) [size=4K]
> Region 1: Memory at dd808000 (32-bit, non-prefetchable) [size=8K]
> Region 2: Memory at dd800000 (32-bit, non-prefetchable) [size=32K]
> Region 5: I/O ports at 0000
> Kernel driver in use: iom
> Kernel modules: pciiom
>
> 06:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01) (prog-if 30 [XHCI])
> Subsystem: Gigabyte Technology Co., Ltd Device 5007
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 37
> Region 0: Memory at de100000 (64-bit, non-prefetchable) [size=32K]
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] MSI: Enable+ Count=1/4 Maskable+ 64bit+
> Address: 00000000feeff00c Data: 4183
> Masking: 0000000e Pending: 00000000
> Capabilities: [a0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [190 v1] Device Serial Number 01-01-01-01-01-01-01-01
> Kernel driver in use: xhci_hcd
> Kernel modules: xhci_pci
>
> 07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12) (prog-if 01 [AHCI 1.0])
> Subsystem: Gigabyte Technology Co., Ltd Device b000
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 30
> Region 0: I/O ports at d040 [size=8]
> Region 1: I/O ports at d030 [size=4]
> Region 2: I/O ports at d020 [size=8]
> Region 3: I/O ports at d010 [size=4]
> Region 4: I/O ports at d000 [size=16]
> Region 5: Memory at de010000 (32-bit, non-prefetchable) [size=512]
> Expansion ROM at de000000 [disabled] [size=64K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Address: feeff00c Data: 41a2
> Capabilities: [70] Express (v2) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> Kernel driver in use: ahci
>
> 08:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI Express-to-PCI Bridge (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=08, secondary=09, subordinate=0d, sec-latency=32
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: d0000000-d87fffff
> Prefetchable memory behind bridge: 00000000c4000000-00000000c6ffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [80] Subsystem: Device 0000:0000
> Capabilities: [90] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> Kernel modules: shpchp
>
> 09:04.0 PCI bridge: Pericom Semiconductor PCI to PCI Bridge (rev 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Bus: primary=09, secondary=0a, subordinate=0d, sec-latency=32
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: d0000000-d87fffff
> Prefetchable memory behind bridge: 00000000c4000000-00000000c6ffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] Slot ID: 0 slots, First-, chassis 00
> Kernel modules: shpchp
>
> 0a:04.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
> Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 42
> Region 0: I/O ports at c200 [size=128]
> Region 1: Memory at d8743000 (32-bit, non-prefetchable) [size=128]
> Expansion ROM at d8700000 [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
> Kernel driver in use: 3c59x
> Kernel modules: 3c59x
>
> 0a:05.0 Network controller: VMIC GE-IP PCI5565,PMC5565 Reflective Memory Node (rev 01)
> Subsystem: PLX Technology, Inc. Device 9656
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 35
> Region 0: Memory at d8742000 (32-bit, non-prefetchable) [size=512]
> Region 1: I/O ports at c100 [size=256]
> Region 2: Memory at d8741000 (32-bit, non-prefetchable) [size=64]
> Region 3: Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
> Capabilities: [40] Power Management version 0
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] #00 [0080]
> Kernel driver in use: rfm2g
> Kernel modules: rfm2g
>
> 0a:06.0 PCI bridge: Hint Corp HiNT HB4 PCI-PCI Bridge (PCI6150) (rev 04) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=32
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: d8600000-d86fffff
> Prefetchable memory behind bridge: 00000000c6000000-00000000c6ffffff
> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
> Capabilities: [e4] CompactPCI hot-swap <?>
> Capabilities: [e8] Vital Product Data
> No end tag found
> Kernel modules: shpchp
>
> 0a:07.0 PCI bridge: Hint Corp HiNT HB4 PCI-PCI Bridge (PCI6150) (rev 04) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Bus: primary=0a, secondary=0c, subordinate=0c, sec-latency=32
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: d8500000-d85fffff
> Prefetchable memory behind bridge: 00000000c5000000-00000000c5ffffff
> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
> Capabilities: [e4] CompactPCI hot-swap <?>
> Capabilities: [e8] Vital Product Data
> No end tag found
> Kernel modules: shpchp
>
> 0a:08.0 PCI bridge: Hint Corp HiNT HB4 PCI-PCI Bridge (PCI6150) (rev 04) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Bus: primary=0a, secondary=0d, subordinate=0d, sec-latency=32
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: d8400000-d84fffff
> Prefetchable memory behind bridge: 00000000c4000000-00000000c4ffffff
> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
> Capabilities: [e4] CompactPCI hot-swap <?>
> Capabilities: [e8] Vital Product Data
> No end tag found
> Kernel modules: shpchp
>
> 0a:09.0 Communication controller: Digi International AccelePort Xr 920 (rev 01)
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 35
> Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=4M]
> Expansion ROM at d8730000 [size=64K]
> Kernel driver in use: dgap
> Kernel modules: dgap
>
> 0a:0a.0 SCSI storage controller: Adaptec AHA-2930CU (rev 03)
> Subsystem: Adaptec Device 3869
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (1000ns min, 1000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 33
> Region 0: I/O ports at c000 [disabled] [size=256]
> Region 1: Memory at d8740000 (32-bit, non-prefetchable) [size=4K]
> Expansion ROM at d8720000 [disabled] [size=64K]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: aic7xxx
> Kernel modules: aic7xxx
>
> 0b:00.0 Unassigned class [ff00]: Compro Computer Services, Inc. Device 4710 (rev 41)
> Subsystem: Compro Computer Services, Inc. Device 4710
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 33
> Region 0: Memory at d8600000 (32-bit, non-prefetchable) [size=512]
> Region 1: Memory at c6000000 (32-bit, prefetchable) [size=16M]
> Capabilities: [80] Vital Product Data
> Unknown small resource type 00, will not decode more.
> Kernel driver in use: gpiohsd
> Kernel modules: gpiohsd
>
> 0c:00.0 Unassigned class [ff00]: Compro Computer Services, Inc. Device 4710 (rev 41)
> Subsystem: Compro Computer Services, Inc. Device 4710
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 44
> Region 0: Memory at d8500000 (32-bit, non-prefetchable) [size=512]
> Region 1: Memory at c5000000 (32-bit, prefetchable) [size=16M]
> Capabilities: [80] Vital Product Data
> Unknown small resource type 00, will not decode more.
> Kernel driver in use: gpiohsd
> Kernel modules: gpiohsd
>
> 0d:00.0 Unassigned class [ff00]: Compro Computer Services, Inc. Device 4710 (rev 41)
> Subsystem: Compro Computer Services, Inc. Device 4710
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 42
> Region 0: Memory at d8400000 (32-bit, non-prefetchable) [size=512]
> Region 1: Memory at c4000000 (32-bit, prefetchable) [size=16M]
> Capabilities: [80] Vital Product Data
> Unknown small resource type 00, will not decode more.
> Kernel driver in use: gpiohsd
> Kernel modules: gpiohsd
>
> 0e:00.0 PCI bridge: PLX Technology, Inc. PEX 8114 PCI Express-to-PCI/PCI-X Bridge (rev bc) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Region 0: Memory at ddc00000 (32-bit, non-prefetchable) [size=8K]
> Bus: primary=0e, secondary=0f, subordinate=0f, sec-latency=32
> I/O behind bridge: 0000b000-0000bfff
> Memory behind bridge: ddb00000-ddbfffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Power Management version 3
> Flags: PMEClk+ DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [58] PCI-X bridge device
> Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
> Status: Dev=0e:00.0 64bit- 133MHz- SCD- USC- SCO+ SRD-
> Upstream: Capacity=16 CommitmentLimit=16
> Downstream: Capacity=16 CommitmentLimit=16
> Capabilities: [68] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0
> ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
> MaxPayload 128 bytes, MaxReadReq 2048 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <2us, L1 <32us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Device Serial Number 00-00-00-01-00-00-0e-df
> Capabilities: [fb4 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [138 v1] Power Budgeting <?>
> Capabilities: [148 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> Status: NegoPending- InProgress-
> Kernel modules: shpchp
>
> 0f:04.0 SCSI storage controller: Adaptec ASC-29320ALP U320 (rev 10)
> Subsystem: Adaptec ASC-29320LPE PCIe U320
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 32
> Region 0: I/O ports at b100 [disabled] [size=256]
> Region 1: Memory at ddb80000 (64-bit, non-prefetchable) [size=8K]
> Region 3: I/O ports at b000 [disabled] [size=256]
> Expansion ROM at ddb00000 [disabled] [size=512K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [a0] MSI: Enable- Count=1/2 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [94] PCI-X non-bridge device
> Command: DPERE- ERO+ RBC=2048 OST=8
> Status: Dev=0f:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=64 RSCEM- 266MHz- 533MHz-
> Kernel driver in use: aic79xx
> Kernel modules: aic79xx
>
> 10:06.0 Unassigned class [ff00]: Compro Computer Services, Inc. PCI RTOM (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 20
> Region 0: I/O ports at a000 [size=64]
> Region 1: Memory at ddf00000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: rtom
> Kernel modules: rtom
>
> 11:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
> Subsystem: Gigabyte Technology Co., Ltd Motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 41
> Region 0: I/O ports at 9000 [size=256]
> Region 2: Memory at c7004000 (64-bit, prefetchable) [size=4K]
> Region 4: Memory at c7000000 (64-bit, prefetchable) [size=16K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Address: 00000000feeff00c Data: 41c3
> Capabilities: [70] Express (v2) Endpoint, MSI 01
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 4096 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
> Vector table: BAR=4 offset=00000000
> PBA: BAR=4 offset=00000800
> Capabilities: [d0] Vital Product Data
> Unknown small resource type 00, will not decode more.
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [140 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> Status: NegoPending- InProgress-
> Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
> Kernel driver in use: r8169
> Kernel modules: r8169
>
> 12:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01) (prog-if 30 [XHCI])
> Subsystem: Gigabyte Technology Co., Ltd Device 5007
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 38
> Region 0: Memory at dde00000 (64-bit, non-prefetchable) [size=32K]
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [70] MSI: Enable+ Count=1/4 Maskable+ 64bit+
> Address: 00000000feeff00c Data: 4193
> Masking: 0000000e Pending: 00000000
> Capabilities: [a0] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [190 v1] Device Serial Number 01-01-01-01-01-01-01-01
> Kernel driver in use: xhci_hcd
> Kernel modules: xhci_pci
>
> 13:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12) (prog-if 01 [AHCI 1.0])
> Subsystem: Gigabyte Technology Co., Ltd Device b000
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 31
> Region 0: I/O ports at 8040 [size=8]
> Region 1: I/O ports at 8030 [size=4]
> Region 2: I/O ports at 8020 [size=8]
> Region 3: I/O ports at 8010 [size=4]
> Region 4: I/O ports at 8000 [size=16]
> Region 5: Memory at ddd10000 (32-bit, non-prefetchable) [size=512]
> Expansion ROM at ddd00000 [disabled] [size=64K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Address: feeff00c Data: 41c2
> Capabilities: [70] Express (v2) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> Kernel driver in use: ahci
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160114000520.GA2449-ejN7fcUYdH/by3iVrkZq2A@public.gmane.org>
@ 2016-01-14 14:04 ` Mark Hounschell
[not found] ` <5697AAD8.1000105-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-01-14 14:04 UTC (permalink / raw)
To: Baoquan He; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/13/2016 07:05 PM, Baoquan He wrote:
> On 01/13/16 at 09:42am, Mark Hounschell wrote:
>> First, attached are the 2 lspci outputs you asked for.
>>
>> After the patch I was still unable to bring the system up but it was
>> much better. 2 of the 8 Sata disks do not come up. If I remove those
>> from my fstab the box comes up with the patch.
>>
>> This MB has 8 internal Sata ports. Six hanging off the South-Bridge
>> (SB950) and two more hanging off Marvell 88SE9172 chips connected
>> to the 990FX chipset. I'm pretty sure the 2 disks that don't come
>> up are the 2 hanging off the Marvell chips. I will have to take the
>> box apart to verify and will if you need me to. And again, all works
>> fine with the IOMMU disabled in the BIOS.
>
> OK, it means the alias dev table entry is correctly set. I checked the
> boot log again and found some interrupt related info. Can you paste the
> boot log which 2 of the 8 sata disks didn't come up with my patch
> applied. And could you tell the pci id of those 2 sata disks, then I
> don't need to find them one by one.
>
OK, I verified the 2 disks are hanging off the Marvel chips.
Here is the dmesg from booting with your patch and the 2
disks not showing up.
[ 0.000000] Linux version 4.4.0-lcrs (root@harley) (gcc version 4.8.3 20140627 [gcc-4_8-branch revision 212064] (SUSE Linux) ) #3 SMP PREEMPT Wed Jan 13 08:23:17 EST 2016
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-lcrs root=/dev/disk/by-id/ata-ST3160815AS_6RACD7A6-part5 splash=verbose showopts video=1600x1200 noresume apm=off vmalloc=256M cma=64M@0-4G audit=0 amd_iommu_dump
[ 0.000000] tseg: 00af800000
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ae474fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae475000-0x00000000aea32fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aea33000-0x00000000aee2efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aee2f000-0x00000000af154fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000af155000-0x00000000af155fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af156000-0x00000000af35bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af35c000-0x00000000af7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000044fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD5, BIOS FB 01/23/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x450000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000AF800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 base 0000B0000000 mask FFFFF0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000450000000 aka 17664M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xaf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd9a0-0x000fd9af] mapped at [ffff8800000fd9a0]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x010f4000, 0x010f4fff] PGTABLE
[ 0.000000] BRK [0x010f5000, 0x010f5fff] PGTABLE
[ 0.000000] BRK [0x010f6000, 0x010f6fff] PGTABLE
[ 0.000000] BRK [0x010f7000, 0x010f7fff] PGTABLE
[ 0.000000] BRK [0x010f8000, 0x010f8fff] PGTABLE
[ 0.000000] BRK [0x010f9000, 0x010f9fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x370a0000-0x37847fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000AEE1F070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000AEE25880 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[ 0.000000] ACPI: DSDT 0x00000000AEE1F170 00670F (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000AEE29F80 000040
[ 0.000000] ACPI: APIC 0x00000000AEE25978 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000AEE25A18 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000AEE25A60 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000AEE25AA0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: MATS 0x00000000AEE25AD8 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
[ 0.000000] ACPI: IVRS 0x00000000AEE25B10 000120 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: BGRT 0x00000000AEE25C30 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] cma: Reserved 64 MiB at 0x00000000aa400000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000044fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ae474fff]
[ 0.000000] node 0: [mem 0x00000000af155000-0x00000000af155fff]
[ 0.000000] node 0: [mem 0x00000000af35c000-0x00000000af7fffff]
[ 0.000000] node 0: [mem 0x0000000100001000-0x000000044fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000044fffffff]
[ 0.000000] On node 0 totalpages: 4188342
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 3605 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11109 pages used for memmap
[ 0.000000] DMA32 zone: 710938 pages, LIFO batch:31
[ 0.000000] Normal zone: 54272 pages used for memmap
[ 0.000000] Normal zone: 3473407 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae475000-0xaea32fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaea33000-0xaee2efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaee2f000-0xaf154fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf156000-0xaf35bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xaf800000-0xf7ffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88044fc00000 s91608 r8192 d31272 u262144
[ 0.000000] pcpu-alloc: s91608 r8192 d31272 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4119292
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-lcrs root=/dev/disk/by-id/ata-ST3160815AS_6RACD7A6-part5 splash=verbose showopts video=1600x1200 noresume apm=off vmalloc=256M cma=64M@0-4G audit=0 amd_iommu_dump
[ 0.000000] audit: disabled (until reboot)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Memory: 16310604K/16753368K available (6207K kernel code, 822K rwdata, 2964K rodata, 984K init, 1180K bss, 377228K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU kthread priority: 1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1032 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3616.851 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 7233.70 BogoMIPS (lpj=3616851)
[ 0.000027] pid_max: default: 32768 minimum: 301
[ 0.000033] ACPI: Core revision 20150930
[ 0.003791] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.003808] Security Framework initialized
[ 0.003836] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.003840] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004077] Initializing cgroup subsys memory
[ 0.004085] Initializing cgroup subsys hugetlb
[ 0.004089] Initializing cgroup subsys pids
[ 0.004110] CPU: Physical Processor ID: 0
[ 0.004113] CPU: Processor Core ID: 0
[ 0.004116] mce: CPU supports 7 MCE banks
[ 0.004123] LVT offset 1 assigned for vector 0xf9
[ 0.004128] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.004131] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.004338] Freeing SMP alternatives memory: 24K (ffffffff80fc5000 - ffffffff80fcb000)
[ 0.007598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.119090] smpboot: CPU0: AMD FX(tm)-8150 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2)
[ 0.119109] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.119115] ... version: 0
[ 0.119118] ... bit width: 48
[ 0.119120] ... generic registers: 6
[ 0.119123] ... value mask: 0000ffffffffffff
[ 0.119126] ... max period: 00007fffffffffff
[ 0.119128] ... fixed-purpose events: 0
[ 0.119131] ... event mask: 000000000000003f
[ 0.128131] x86: Booting SMP configuration:
[ 0.128135] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.184905] x86: Booted up 1 node, 8 CPUs
[ 0.184912] smpboot: Total of 8 processors activated (57869.61 BogoMIPS)
[ 0.197264] devtmpfs: initialized
[ 0.197478] PM: Registering ACPI NVS region [mem 0xaea33000-0xaee2efff] (4177920 bytes)
[ 0.197528] PM: Registering ACPI NVS region [mem 0xaf156000-0xaf35bfff] (2121728 bytes)
[ 0.197636] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.198000] pinctrl core: initialized pinctrl subsystem
[ 0.198034] RTC time: 13:06:12, date: 01/14/16
[ 0.199056] NET: Registered protocol family 16
[ 0.200959] cpuidle: using governor ladder
[ 0.202957] cpuidle: using governor menu
[ 0.203028] ACPI: bus type PCI registered
[ 0.203031] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.203088] PCI: Using configuration type 1 for base access
[ 0.203091] PCI: Using configuration type 1 for extended access
[ 0.206249] ACPI: Added _OSI(Module Device)
[ 0.206253] ACPI: Added _OSI(Processor Device)
[ 0.206256] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.206259] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.207983] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.210700] ACPI: Interpreter enabled
[ 0.210707] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.210715] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.210730] ACPI: (supports S0 S3 S4 S5)
[ 0.210733] ACPI: Using IOAPIC for interrupt routing
[ 0.210900] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.217343] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.217350] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.217358] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.217729] PCI host bridge to bus 0000:00
[ 0.217733] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.217737] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.217741] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.217745] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.217748] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.217753] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.217758] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff window]
[ 0.217763] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.217773] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.217885] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.217994] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.218026] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.218085] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.218122] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.218152] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.218207] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.218247] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.218277] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.218332] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.218368] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[ 0.218398] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.218452] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.218488] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
[ 0.218519] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.218574] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.218612] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
[ 0.218643] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[ 0.218697] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.218739] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.218758] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
[ 0.218765] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
[ 0.218772] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
[ 0.218779] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
[ 0.218786] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
[ 0.218793] pci 0000:00:11.0: reg 0x24: [mem 0xd880b000-0xd880b3ff]
[ 0.218893] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.218904] pci 0000:00:12.0: reg 0x10: [mem 0xd880a000-0xd880afff]
[ 0.218995] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.219035] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.219054] pci 0000:00:12.2: reg 0x10: [mem 0xd8809000-0xd88090ff]
[ 0.219107] pci 0000:00:12.2: supports D1 D2
[ 0.219109] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.219162] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.219203] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.219214] pci 0000:00:13.0: reg 0x10: [mem 0xd8808000-0xd8808fff]
[ 0.219303] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.219344] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.219362] pci 0000:00:13.2: reg 0x10: [mem 0xd8807000-0xd88070ff]
[ 0.219414] pci 0000:00:13.2: supports D1 D2
[ 0.219415] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.219467] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.219510] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.219630] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.219642] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
[ 0.219649] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
[ 0.219656] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
[ 0.219663] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
[ 0.219670] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.219685] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.219688] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.219692] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.219695] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.219778] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.219798] pci 0000:00:14.2: reg 0x10: [mem 0xd8800000-0xd8803fff 64bit]
[ 0.219842] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.219893] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.219928] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.220053] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.220129] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.220165] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.220177] pci 0000:00:14.5: reg 0x10: [mem 0xd8806000-0xd8806fff]
[ 0.220265] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.220305] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.220356] pci 0000:00:15.0: supports D1 D2
[ 0.220410] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.220448] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.220498] pci 0000:00:15.1: supports D1 D2
[ 0.220553] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.220592] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[ 0.220643] pci 0000:00:15.2: supports D1 D2
[ 0.220697] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.220737] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.220749] pci 0000:00:16.0: reg 0x10: [mem 0xd8805000-0xd8805fff]
[ 0.220837] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.220878] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.220896] pci 0000:00:16.2: reg 0x10: [mem 0xd8804000-0xd88040ff]
[ 0.220949] pci 0000:00:16.2: supports D1 D2
[ 0.220951] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.221002] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.221043] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.221126] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.221203] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.221281] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.221361] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.221438] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.221567] pci 0000:01:00.0: [10de:0092] type 00 class 0x030000
[ 0.221583] pci 0000:01:00.0: reg 0x10: [mem 0xda000000-0xdaffffff]
[ 0.221592] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.221600] pci 0000:01:00.0: reg 0x1c: [mem 0xd9000000-0xd9ffffff 64bit]
[ 0.221605] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.221611] pci 0000:01:00.0: reg 0x30: [mem 0xdb000000-0xdb01ffff pref]
[ 0.221672] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.221681] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.221686] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.221688] pci 0000:00:02.0: bridge window [mem 0xd9000000-0xdb0fffff]
[ 0.221690] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.221732] pci 0000:02:00.0: [104c:8231] type 01 class 0x060400
[ 0.221818] pci 0000:02:00.0: supports D1 D2
[ 0.221862] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.221871] pci 0000:00:04.0: PCI bridge to [bus 02-05]
[ 0.221876] pci 0000:00:04.0: bridge window [io 0x6000-0x7fff]
[ 0.221878] pci 0000:00:04.0: bridge window [mem 0xdb800000-0xdd9fffff]
[ 0.221881] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.221943] pci 0000:03:04.0: [12d8:8150] type 01 class 0x060400
[ 0.222097] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[ 0.222105] pci 0000:02:00.0: bridge window [io 0x6000-0x7fff]
[ 0.222109] pci 0000:02:00.0: bridge window [mem 0xdb800000-0xdd9fffff]
[ 0.222115] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.222178] pci 0000:04:04.0: [10b5:0480] type 00 class 0x0e8000
[ 0.222227] pci 0000:04:04.0: reg 0x10: [mem 0xdd909000-0xdd9093ff]
[ 0.222243] pci 0000:04:04.0: reg 0x14: [mem 0xdd000000-0xdd7fffff]
[ 0.222259] pci 0000:04:04.0: reg 0x18: [mem 0xdd908000-0xdd90800f]
[ 0.222413] pci 0000:04:05.0: [10b5:0480] type 00 class 0x0e8000
[ 0.222462] pci 0000:04:05.0: reg 0x10: [mem 0xdd907000-0xdd9073ff]
[ 0.222478] pci 0000:04:05.0: reg 0x14: [mem 0xdc800000-0xdcffffff]
[ 0.222494] pci 0000:04:05.0: reg 0x18: [mem 0xdd906000-0xdd90600f]
[ 0.222649] pci 0000:04:06.0: [10b5:0480] type 00 class 0x0e8000
[ 0.222698] pci 0000:04:06.0: reg 0x10: [mem 0xdd905000-0xdd9053ff]
[ 0.222714] pci 0000:04:06.0: reg 0x14: [mem 0xdc000000-0xdc7fffff]
[ 0.222730] pci 0000:04:06.0: reg 0x18: [mem 0xdd904000-0xdd90400f]
[ 0.222885] pci 0000:04:07.0: [10b5:0480] type 00 class 0x0e8000
[ 0.222934] pci 0000:04:07.0: reg 0x10: [mem 0xdd903000-0xdd9033ff]
[ 0.222951] pci 0000:04:07.0: reg 0x14: [mem 0xdb800000-0xdbffffff]
[ 0.222967] pci 0000:04:07.0: reg 0x18: [mem 0xdd902000-0xdd90200f]
[ 0.223122] pci 0000:04:08.0: [3388:0022] type 01 class 0x060400
[ 0.223248] pci 0000:04:08.0: supports D1 D2
[ 0.223249] pci 0000:04:08.0: PME# supported from D0 D1 D2 D3hot
[ 0.223304] pci 0000:04:09.0: [10b5:9030] type 00 class 0x070002
[ 0.223331] pci 0000:04:09.0: reg 0x10: [mem 0xdd901000-0xdd90107f]
[ 0.223347] pci 0000:04:09.0: reg 0x14: [io 0x7180-0x71ff]
[ 0.223362] pci 0000:04:09.0: reg 0x18: [io 0x7100-0x717f]
[ 0.223470] pci 0000:04:0a.0: [1090:4360] type 00 class 0x058000
[ 0.223496] pci 0000:04:0a.0: reg 0x10: [mem 0xdd900000-0xdd9000ff]
[ 0.223512] pci 0000:04:0a.0: reg 0x14: [io 0x7000-0x70ff]
[ 0.223528] pci 0000:04:0a.0: reg 0x18: [mem 0xc0000000-0xc3ffffff pref]
[ 0.223586] pci 0000:04:0a.0: reg 0x30: [mem 0xdd90a000-0xdd90a7ff pref]
[ 0.223671] pci 0000:03:04.0: PCI bridge to [bus 04-05]
[ 0.223680] pci 0000:03:04.0: bridge window [io 0x6000-0x7fff]
[ 0.223684] pci 0000:03:04.0: bridge window [mem 0xdb800000-0xdd9fffff]
[ 0.223691] pci 0000:03:04.0: bridge window [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.223753] pci 0000:05:00.0: [1090:0100] type 00 class 0xff0000
[ 0.223783] pci 0000:05:00.0: reg 0x10: [mem 0xdd80a000-0xdd80afff]
[ 0.223801] pci 0000:05:00.0: reg 0x14: [mem 0xdd808000-0xdd809fff]
[ 0.223820] pci 0000:05:00.0: reg 0x18: [mem 0xdd800000-0xdd807fff]
[ 0.224006] pci 0000:04:08.0: PCI bridge to [bus 05]
[ 0.224017] pci 0000:04:08.0: bridge window [io 0x6000-0x6fff]
[ 0.224023] pci 0000:04:08.0: bridge window [mem 0xdd800000-0xdd8fffff]
[ 0.224095] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.224120] pci 0000:06:00.0: reg 0x10: [mem 0xde100000-0xde107fff 64bit]
[ 0.224179] pci 0000:06:00.0: supports D1 D2
[ 0.224181] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.226080] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.226086] pci 0000:00:09.0: bridge window [mem 0xde100000-0xde1fffff]
[ 0.226128] pci 0000:07:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.226146] pci 0000:07:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.226152] pci 0000:07:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.226158] pci 0000:07:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.226164] pci 0000:07:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.226170] pci 0000:07:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.226176] pci 0000:07:00.0: reg 0x24: [mem 0xde010000-0xde0101ff]
[ 0.226182] pci 0000:07:00.0: reg 0x30: [mem 0xde000000-0xde00ffff pref]
[ 0.226207] pci 0000:07:00.0: PME# supported from D3hot
[ 0.228076] pci 0000:00:0a.0: PCI bridge to [bus 07]
[ 0.228082] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.228084] pci 0000:00:0a.0: bridge window [mem 0xde000000-0xde0fffff]
[ 0.228132] pci 0000:08:00.0: [104c:8231] type 01 class 0x060400
[ 0.228224] pci 0000:08:00.0: supports D1 D2
[ 0.228271] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.228281] pci 0000:00:0b.0: PCI bridge to [bus 08-0d]
[ 0.228285] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
[ 0.228288] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xd87fffff]
[ 0.228290] pci 0000:00:0b.0: bridge window [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.228353] pci 0000:09:04.0: [12d8:8150] type 01 class 0x060400
[ 0.228510] pci 0000:08:00.0: PCI bridge to [bus 09-0d]
[ 0.228518] pci 0000:08:00.0: bridge window [io 0xc000-0xcfff]
[ 0.228522] pci 0000:08:00.0: bridge window [mem 0xd0000000-0xd87fffff]
[ 0.228529] pci 0000:08:00.0: bridge window [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.228592] pci 0000:0a:04.0: [10b7:9200] type 00 class 0x020000
[ 0.228631] pci 0000:0a:04.0: reg 0x10: [io 0xc200-0xc27f]
[ 0.228647] pci 0000:0a:04.0: reg 0x14: [mem 0xd8743000-0xd874307f]
[ 0.228721] pci 0000:0a:04.0: reg 0x30: [mem 0xd8700000-0xd871ffff pref]
[ 0.228756] pci 0000:0a:04.0: supports D1 D2
[ 0.228758] pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot
[ 0.228815] pci 0000:0a:05.0: [114a:5565] type 00 class 0x028000
[ 0.228859] pci 0000:0a:05.0: reg 0x10: [mem 0xd8742000-0xd87421ff]
[ 0.228875] pci 0000:0a:05.0: reg 0x14: [io 0xc100-0xc1ff]
[ 0.228891] pci 0000:0a:05.0: reg 0x18: [mem 0xd8741000-0xd874103f]
[ 0.228907] pci 0000:0a:05.0: reg 0x1c: [mem 0xd0000000-0xd7ffffff]
[ 0.229042] pci 0000:0a:06.0: [3388:0022] type 01 class 0x060400
[ 0.229174] pci 0000:0a:06.0: supports D1 D2
[ 0.229175] pci 0000:0a:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.229238] pci 0000:0a:07.0: [3388:0022] type 01 class 0x060400
[ 0.229367] pci 0000:0a:07.0: supports D1 D2
[ 0.229368] pci 0000:0a:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.229430] pci 0000:0a:08.0: [3388:0022] type 01 class 0x060400
[ 0.229559] pci 0000:0a:08.0: supports D1 D2
[ 0.229560] pci 0000:0a:08.0: PME# supported from D0 D1 D2 D3hot
[ 0.229614] pci 0000:0a:09.0: [114f:0027] type 00 class 0x078000
[ 0.229641] pci 0000:0a:09.0: reg 0x10: [mem 0xd8000000-0xd83fffff]
[ 0.229729] pci 0000:0a:09.0: reg 0x30: [mem 0xd8730000-0xd873ffff pref]
[ 0.229785] pci 0000:0a:0a.0: [9004:3860] type 00 class 0x010000
[ 0.229823] pci 0000:0a:0a.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.229839] pci 0000:0a:0a.0: reg 0x14: [mem 0xd8740000-0xd8740fff]
[ 0.229913] pci 0000:0a:0a.0: reg 0x30: [mem 0xd8720000-0xd872ffff pref]
[ 0.230023] pci 0000:09:04.0: PCI bridge to [bus 0a-0d]
[ 0.230033] pci 0000:09:04.0: bridge window [io 0xc000-0xcfff]
[ 0.230037] pci 0000:09:04.0: bridge window [mem 0xd0000000-0xd87fffff]
[ 0.230045] pci 0000:09:04.0: bridge window [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.230115] pci 0000:0b:00.0: [1090:4710] type 00 class 0xff0000
[ 0.230161] pci 0000:0b:00.0: reg 0x10: [mem 0xd8600000-0xd86001ff]
[ 0.230179] pci 0000:0b:00.0: reg 0x14: [mem 0xc6000000-0xc6ffffff pref]
[ 0.230410] pci 0000:0a:06.0: PCI bridge to [bus 0b]
[ 0.230425] pci 0000:0a:06.0: bridge window [mem 0xd8600000-0xd86fffff]
[ 0.230435] pci 0000:0a:06.0: bridge window [mem 0xc6000000-0xc6ffffff 64bit pref]
[ 0.230505] pci 0000:0c:00.0: [1090:4710] type 00 class 0xff0000
[ 0.230550] pci 0000:0c:00.0: reg 0x10: [mem 0xd8500000-0xd85001ff]
[ 0.230569] pci 0000:0c:00.0: reg 0x14: [mem 0xc5000000-0xc5ffffff pref]
[ 0.230799] pci 0000:0a:07.0: PCI bridge to [bus 0c]
[ 0.230814] pci 0000:0a:07.0: bridge window [mem 0xd8500000-0xd85fffff]
[ 0.230824] pci 0000:0a:07.0: bridge window [mem 0xc5000000-0xc5ffffff 64bit pref]
[ 0.230896] pci 0000:0d:00.0: [1090:4710] type 00 class 0xff0000
[ 0.230942] pci 0000:0d:00.0: reg 0x10: [mem 0xd8400000-0xd84001ff]
[ 0.230961] pci 0000:0d:00.0: reg 0x14: [mem 0xc4000000-0xc4ffffff pref]
[ 0.231194] pci 0000:0a:08.0: PCI bridge to [bus 0d]
[ 0.231210] pci 0000:0a:08.0: bridge window [mem 0xd8400000-0xd84fffff]
[ 0.231219] pci 0000:0a:08.0: bridge window [mem 0xc4000000-0xc4ffffff 64bit pref]
[ 0.231305] pci 0000:0e:00.0: [10b5:8114] type 01 class 0x060400
[ 0.231340] pci 0000:0e:00.0: reg 0x10: [mem 0xddc00000-0xddc01fff]
[ 0.231425] pci 0000:0e:00.0: PME# supported from D0 D3hot
[ 0.231496] pci 0000:0e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.231507] pci 0000:00:0d.0: PCI bridge to [bus 0e-0f]
[ 0.231511] pci 0000:00:0d.0: bridge window [io 0xb000-0xbfff]
[ 0.231513] pci 0000:00:0d.0: bridge window [mem 0xddb00000-0xddcfffff]
[ 0.231578] pci 0000:0f:04.0: [9005:8017] type 00 class 0x010000
[ 0.231617] pci 0000:0f:04.0: reg 0x10: [io 0xb100-0xb1ff]
[ 0.231634] pci 0000:0f:04.0: reg 0x14: [mem 0xddb80000-0xddb81fff 64bit]
[ 0.231645] pci 0000:0f:04.0: reg 0x1c: [io 0xb000-0xb0ff]
[ 0.231676] pci 0000:0f:04.0: reg 0x30: [mem 0xddb00000-0xddb7ffff pref]
[ 0.231781] pci 0000:0e:00.0: PCI bridge to [bus 0f]
[ 0.231790] pci 0000:0e:00.0: bridge window [io 0xb000-0xbfff]
[ 0.231794] pci 0000:0e:00.0: bridge window [mem 0xddb00000-0xddbfffff]
[ 0.231845] pci 0000:10:06.0: [1090:4610] type 00 class 0xff0000
[ 0.231860] pci 0000:10:06.0: reg 0x10: [io 0xa000-0xa03f]
[ 0.231870] pci 0000:10:06.0: reg 0x14: [mem 0xddf00000-0xddf00fff]
[ 0.231976] pci 0000:00:14.4: PCI bridge to [bus 10] (subtractive decode)
[ 0.231982] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.231985] pci 0000:00:14.4: bridge window [mem 0xddf00000-0xddffffff]
[ 0.231988] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.231989] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.231991] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.231992] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.231994] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.231995] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.231997] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff window] (subtractive decode)
[ 0.232058] pci 0000:11:00.0: [10ec:8168] type 00 class 0x020000
[ 0.232095] pci 0000:11:00.0: reg 0x10: [io 0x9000-0x90ff]
[ 0.232120] pci 0000:11:00.0: reg 0x18: [mem 0xc7004000-0xc7004fff 64bit pref]
[ 0.232135] pci 0000:11:00.0: reg 0x20: [mem 0xc7000000-0xc7003fff 64bit pref]
[ 0.232198] pci 0000:11:00.0: supports D1 D2
[ 0.232200] pci 0000:11:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.232241] pci 0000:11:00.0: System wakeup disabled by ACPI
[ 0.234080] pci 0000:00:15.0: PCI bridge to [bus 11]
[ 0.234086] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff]
[ 0.234092] pci 0000:00:15.0: bridge window [mem 0xc7000000-0xc70fffff 64bit pref]
[ 0.234146] pci 0000:12:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.234181] pci 0000:12:00.0: reg 0x10: [mem 0xdde00000-0xdde07fff 64bit]
[ 0.234265] pci 0000:12:00.0: supports D1 D2
[ 0.234267] pci 0000:12:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.236079] pci 0000:00:15.1: PCI bridge to [bus 12]
[ 0.236087] pci 0000:00:15.1: bridge window [mem 0xdde00000-0xddefffff]
[ 0.236142] pci 0000:13:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.236167] pci 0000:13:00.0: reg 0x10: [io 0x8040-0x8047]
[ 0.236176] pci 0000:13:00.0: reg 0x14: [io 0x8030-0x8033]
[ 0.236184] pci 0000:13:00.0: reg 0x18: [io 0x8020-0x8027]
[ 0.236192] pci 0000:13:00.0: reg 0x1c: [io 0x8010-0x8013]
[ 0.236201] pci 0000:13:00.0: reg 0x20: [io 0x8000-0x800f]
[ 0.236209] pci 0000:13:00.0: reg 0x24: [mem 0xddd10000-0xddd101ff]
[ 0.236218] pci 0000:13:00.0: reg 0x30: [mem 0xddd00000-0xddd0ffff pref]
[ 0.236251] pci 0000:13:00.0: PME# supported from D3hot
[ 0.238076] pci 0000:00:15.2: PCI bridge to [bus 13]
[ 0.238083] pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
[ 0.238086] pci 0000:00:15.2: bridge window [mem 0xddd00000-0xdddfffff]
[ 0.238122] pci_bus 0000:00: on NUMA node 0
[ 0.238618] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.238697] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.238778] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.238859] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.238925] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[ 0.238980] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[ 0.239032] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[ 0.239088] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[ 0.239257] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.239261] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.239271] vgaarb: loaded
[ 0.239273] vgaarb: bridge control possible 0000:01:00.0
[ 0.239346] SCSI subsystem initialized
[ 0.239399] libata version 3.00 loaded.
[ 0.239403] ACPI: bus type USB registered
[ 0.239420] usbcore: registered new interface driver usbfs
[ 0.239430] usbcore: registered new interface driver hub
[ 0.239451] usbcore: registered new device driver usb
[ 0.239562] PCI: Using ACPI for IRQ routing
[ 0.239566] PCI: pci_cache_line_size set to 64 bytes
[ 0.239726] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.239728] e820: reserve RAM buffer [mem 0xae475000-0xafffffff]
[ 0.239729] e820: reserve RAM buffer [mem 0xaf156000-0xafffffff]
[ 0.239730] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
[ 0.239822] NetLabel: Initializing
[ 0.239825] NetLabel: domain hash size = 128
[ 0.239828] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.239838] NetLabel: unlabeled traffic allowed by default
[ 0.239876] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.239881] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.241947] clocksource: Switched to clocksource hpet
[ 0.244815] pnp: PnP ACPI init
[ 0.244930] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.244941] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.245296] system 00:01: [io 0x040b] has been reserved
[ 0.245300] system 00:01: [io 0x04d6] has been reserved
[ 0.245304] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.245307] system 00:01: [io 0x0c14] has been reserved
[ 0.245311] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.245314] system 00:01: [io 0x0c52] has been reserved
[ 0.245318] system 00:01: [io 0x0c6c] has been reserved
[ 0.245321] system 00:01: [io 0x0c6f] has been reserved
[ 0.245324] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.245328] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.245332] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.245335] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.245339] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.245342] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.245346] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.245350] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.245353] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.245357] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.245361] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.245365] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.245369] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.245372] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.245376] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.245380] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.245384] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.245389] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.245571] system 00:02: [io 0x0220-0x0227] has been reserved
[ 0.245575] system 00:02: [io 0x0228-0x0237] has been reserved
[ 0.245578] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 0.245583] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.245629] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.245901] pnp 00:04: [dma 0 disabled]
[ 0.245946] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.245972] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.246053] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.246058] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.246111] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.246278] system 00:08: [mem 0xfeb20000-0xfeb23fff] has been reserved
[ 0.246283] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.246425] system 00:09: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.246430] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.246549] pnp: PnP ACPI: found 10 devices
[ 0.253194] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.253328] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.253333] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.253338] pci 0000:00:02.0: bridge window [mem 0xd9000000-0xdb0fffff]
[ 0.253342] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.253350] pci 0000:04:08.0: PCI bridge to [bus 05]
[ 0.253355] pci 0000:04:08.0: bridge window [io 0x6000-0x6fff]
[ 0.253365] pci 0000:04:08.0: bridge window [mem 0xdd800000-0xdd8fffff]
[ 0.253381] pci 0000:03:04.0: PCI bridge to [bus 04-05]
[ 0.253386] pci 0000:03:04.0: bridge window [io 0x6000-0x7fff]
[ 0.253394] pci 0000:03:04.0: bridge window [mem 0xdb800000-0xdd9fffff]
[ 0.253400] pci 0000:03:04.0: bridge window [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.253411] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[ 0.253415] pci 0000:02:00.0: bridge window [io 0x6000-0x7fff]
[ 0.253422] pci 0000:02:00.0: bridge window [mem 0xdb800000-0xdd9fffff]
[ 0.253428] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.253437] pci 0000:00:04.0: PCI bridge to [bus 02-05]
[ 0.253440] pci 0000:00:04.0: bridge window [io 0x6000-0x7fff]
[ 0.253445] pci 0000:00:04.0: bridge window [mem 0xdb800000-0xdd9fffff]
[ 0.253449] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.253455] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.253459] pci 0000:00:09.0: bridge window [mem 0xde100000-0xde1fffff]
[ 0.253465] pci 0000:00:0a.0: PCI bridge to [bus 07]
[ 0.253468] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.253473] pci 0000:00:0a.0: bridge window [mem 0xde000000-0xde0fffff]
[ 0.253479] pci 0000:0a:06.0: PCI bridge to [bus 0b]
[ 0.253489] pci 0000:0a:06.0: bridge window [mem 0xd8600000-0xd86fffff]
[ 0.253497] pci 0000:0a:06.0: bridge window [mem 0xc6000000-0xc6ffffff 64bit pref]
[ 0.253510] pci 0000:0a:07.0: PCI bridge to [bus 0c]
[ 0.253520] pci 0000:0a:07.0: bridge window [mem 0xd8500000-0xd85fffff]
[ 0.253528] pci 0000:0a:07.0: bridge window [mem 0xc5000000-0xc5ffffff 64bit pref]
[ 0.253541] pci 0000:0a:08.0: PCI bridge to [bus 0d]
[ 0.253551] pci 0000:0a:08.0: bridge window [mem 0xd8400000-0xd84fffff]
[ 0.253558] pci 0000:0a:08.0: bridge window [mem 0xc4000000-0xc4ffffff 64bit pref]
[ 0.253572] pci 0000:09:04.0: PCI bridge to [bus 0a-0d]
[ 0.253576] pci 0000:09:04.0: bridge window [io 0xc000-0xcfff]
[ 0.253584] pci 0000:09:04.0: bridge window [mem 0xd0000000-0xd87fffff]
[ 0.253591] pci 0000:09:04.0: bridge window [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.253602] pci 0000:08:00.0: PCI bridge to [bus 09-0d]
[ 0.253606] pci 0000:08:00.0: bridge window [io 0xc000-0xcfff]
[ 0.253613] pci 0000:08:00.0: bridge window [mem 0xd0000000-0xd87fffff]
[ 0.253619] pci 0000:08:00.0: bridge window [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.253628] pci 0000:00:0b.0: PCI bridge to [bus 08-0d]
[ 0.253632] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
[ 0.253636] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xd87fffff]
[ 0.253640] pci 0000:00:0b.0: bridge window [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.253646] pci 0000:0e:00.0: PCI bridge to [bus 0f]
[ 0.253651] pci 0000:0e:00.0: bridge window [io 0xb000-0xbfff]
[ 0.253660] pci 0000:0e:00.0: bridge window [mem 0xddb00000-0xddbfffff]
[ 0.253674] pci 0000:00:0d.0: PCI bridge to [bus 0e-0f]
[ 0.253677] pci 0000:00:0d.0: bridge window [io 0xb000-0xbfff]
[ 0.253681] pci 0000:00:0d.0: bridge window [mem 0xddb00000-0xddcfffff]
[ 0.253687] pci 0000:00:14.4: PCI bridge to [bus 10]
[ 0.253691] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.253697] pci 0000:00:14.4: bridge window [mem 0xddf00000-0xddffffff]
[ 0.253705] pci 0000:00:15.0: PCI bridge to [bus 11]
[ 0.253709] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff]
[ 0.253716] pci 0000:00:15.0: bridge window [mem 0xc7000000-0xc70fffff 64bit pref]
[ 0.253723] pci 0000:00:15.1: PCI bridge to [bus 12]
[ 0.253728] pci 0000:00:15.1: bridge window [mem 0xdde00000-0xddefffff]
[ 0.253736] pci 0000:00:15.2: PCI bridge to [bus 13]
[ 0.253739] pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
[ 0.253745] pci 0000:00:15.2: bridge window [mem 0xddd00000-0xdddfffff]
[ 0.253753] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.253754] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.253756] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.253757] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.253759] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.253760] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.253762] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xdfffffff window]
[ 0.253763] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.253765] pci_bus 0000:01: resource 1 [mem 0xd9000000-0xdb0fffff]
[ 0.253766] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.253768] pci_bus 0000:02: resource 0 [io 0x6000-0x7fff]
[ 0.253769] pci_bus 0000:02: resource 1 [mem 0xdb800000-0xdd9fffff]
[ 0.253770] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.253772] pci_bus 0000:03: resource 0 [io 0x6000-0x7fff]
[ 0.253773] pci_bus 0000:03: resource 1 [mem 0xdb800000-0xdd9fffff]
[ 0.253775] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.253776] pci_bus 0000:04: resource 0 [io 0x6000-0x7fff]
[ 0.253777] pci_bus 0000:04: resource 1 [mem 0xdb800000-0xdd9fffff]
[ 0.253779] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.253780] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
[ 0.253782] pci_bus 0000:05: resource 1 [mem 0xdd800000-0xdd8fffff]
[ 0.253783] pci_bus 0000:06: resource 1 [mem 0xde100000-0xde1fffff]
[ 0.253785] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
[ 0.253786] pci_bus 0000:07: resource 1 [mem 0xde000000-0xde0fffff]
[ 0.253787] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.253789] pci_bus 0000:08: resource 1 [mem 0xd0000000-0xd87fffff]
[ 0.253790] pci_bus 0000:08: resource 2 [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.253792] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
[ 0.253793] pci_bus 0000:09: resource 1 [mem 0xd0000000-0xd87fffff]
[ 0.253794] pci_bus 0000:09: resource 2 [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.253796] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff]
[ 0.253797] pci_bus 0000:0a: resource 1 [mem 0xd0000000-0xd87fffff]
[ 0.253799] pci_bus 0000:0a: resource 2 [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.253800] pci_bus 0000:0b: resource 1 [mem 0xd8600000-0xd86fffff]
[ 0.253802] pci_bus 0000:0b: resource 2 [mem 0xc6000000-0xc6ffffff 64bit pref]
[ 0.253803] pci_bus 0000:0c: resource 1 [mem 0xd8500000-0xd85fffff]
[ 0.253804] pci_bus 0000:0c: resource 2 [mem 0xc5000000-0xc5ffffff 64bit pref]
[ 0.253806] pci_bus 0000:0d: resource 1 [mem 0xd8400000-0xd84fffff]
[ 0.253807] pci_bus 0000:0d: resource 2 [mem 0xc4000000-0xc4ffffff 64bit pref]
[ 0.253809] pci_bus 0000:0e: resource 0 [io 0xb000-0xbfff]
[ 0.253810] pci_bus 0000:0e: resource 1 [mem 0xddb00000-0xddcfffff]
[ 0.253811] pci_bus 0000:0f: resource 0 [io 0xb000-0xbfff]
[ 0.253813] pci_bus 0000:0f: resource 1 [mem 0xddb00000-0xddbfffff]
[ 0.253814] pci_bus 0000:10: resource 0 [io 0xa000-0xafff]
[ 0.253816] pci_bus 0000:10: resource 1 [mem 0xddf00000-0xddffffff]
[ 0.253817] pci_bus 0000:10: resource 4 [io 0x0000-0x03af window]
[ 0.253819] pci_bus 0000:10: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.253820] pci_bus 0000:10: resource 6 [io 0x03b0-0x03df window]
[ 0.253822] pci_bus 0000:10: resource 7 [io 0x0d00-0xffff window]
[ 0.253823] pci_bus 0000:10: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.253824] pci_bus 0000:10: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.253826] pci_bus 0000:10: resource 10 [mem 0xb0000000-0xdfffffff window]
[ 0.253827] pci_bus 0000:11: resource 0 [io 0x9000-0x9fff]
[ 0.253829] pci_bus 0000:11: resource 2 [mem 0xc7000000-0xc70fffff 64bit pref]
[ 0.253830] pci_bus 0000:12: resource 1 [mem 0xdde00000-0xddefffff]
[ 0.253832] pci_bus 0000:13: resource 0 [io 0x8000-0x8fff]
[ 0.253833] pci_bus 0000:13: resource 1 [mem 0xddd00000-0xdddfffff]
[ 0.253853] NET: Registered protocol family 2
[ 0.254005] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.254222] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.254405] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.254436] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.254490] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.254581] NET: Registered protocol family 1
[ 0.550961] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.550964] pci 0000:02:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
[ 0.551018] pci 0000:08:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
[ 0.551092] PCI: CLS 64 bytes, default 64
[ 0.551138] Unpacking initramfs...
[ 1.216602] microcode: microcode: updated early to new patch_level=0x0600063d
[ 1.218243] Freeing initrd memory: 7840K (ffff8800370a0000 - ffff880037848000)
[ 1.218323] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: 3e info 1300
[ 1.218327] AMD-Vi: mmio-addr: 00000000feb20000
[ 1.218348] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:00.0 flags: 00
[ 1.218351] AMD-Vi: DEV_RANGE_END devid: 00:00.2
[ 1.218355] AMD-Vi: DEV_SELECT devid: 00:02.0 flags: 00
[ 1.218357] AMD-Vi: DEV_SELECT devid: 01:00.0 flags: 00
[ 1.218360] AMD-Vi: DEV_SELECT devid: 00:04.0 flags: 00
[ 1.218363] AMD-Vi: DEV_SELECT devid: 02:00.0 flags: 00
[ 1.218366] AMD-Vi: DEV_ALIAS_RANGE devid: 03:01.0 flags: 00 devid_to: 03:00.0
[ 1.218371] AMD-Vi: DEV_RANGE_END devid: 05:1f.7
[ 1.218385] AMD-Vi: DEV_SELECT devid: 00:09.0 flags: 00
[ 1.218388] AMD-Vi: DEV_SELECT devid: 06:00.0 flags: 00
[ 1.218391] AMD-Vi: DEV_SELECT devid: 00:0a.0 flags: 00
[ 1.218394] AMD-Vi: DEV_SELECT devid: 07:00.0 flags: 00
[ 1.218397] AMD-Vi: DEV_SELECT devid: 00:0b.0 flags: 00
[ 1.218399] AMD-Vi: DEV_SELECT devid: 08:00.0 flags: 00
[ 1.218402] AMD-Vi: DEV_ALIAS_RANGE devid: 09:01.0 flags: 00 devid_to: 09:00.0
[ 1.218407] AMD-Vi: DEV_RANGE_END devid: 0d:1f.7
[ 1.218429] AMD-Vi: DEV_SELECT devid: 00:0d.0 flags: 00
[ 1.218432] AMD-Vi: DEV_SELECT devid: 0e:00.0 flags: 00
[ 1.218435] AMD-Vi: DEV_ALIAS_RANGE devid: 0f:01.0 flags: 00 devid_to: 0f:00.0
[ 1.218440] AMD-Vi: DEV_RANGE_END devid: 0f:1f.7
[ 1.218446] AMD-Vi: DEV_SELECT devid: 00:11.0 flags: 00
[ 1.218449] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:12.0 flags: 00
[ 1.218452] AMD-Vi: DEV_RANGE_END devid: 00:12.2
[ 1.218455] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:13.0 flags: 00
[ 1.218457] AMD-Vi: DEV_RANGE_END devid: 00:13.2
[ 1.218460] AMD-Vi: DEV_SELECT devid: 00:14.0 flags: d7
[ 1.218463] AMD-Vi: DEV_SELECT devid: 00:14.1 flags: 00
[ 1.218466] AMD-Vi: DEV_SELECT devid: 00:14.2 flags: 00
[ 1.218469] AMD-Vi: DEV_SELECT devid: 00:14.3 flags: 00
[ 1.218471] AMD-Vi: DEV_SELECT devid: 00:14.4 flags: 00
[ 1.218474] AMD-Vi: DEV_ALIAS_RANGE devid: 10:00.0 flags: 00 devid_to: 00:14.4
[ 1.218479] AMD-Vi: DEV_RANGE_END devid: 10:1f.7
[ 1.218485] AMD-Vi: DEV_SELECT devid: 00:14.5 flags: 00
[ 1.218488] AMD-Vi: DEV_SELECT devid: 00:15.0 flags: 00
[ 1.218491] AMD-Vi: DEV_SELECT devid: 11:00.0 flags: 00
[ 1.218494] AMD-Vi: DEV_SELECT devid: 00:15.1 flags: 00
[ 1.218497] AMD-Vi: DEV_SELECT devid: 12:00.0 flags: 00
[ 1.218499] AMD-Vi: DEV_SELECT devid: 00:15.2 flags: 00
[ 1.218502] AMD-Vi: DEV_SELECT devid: 13:00.0 flags: 00
[ 1.218505] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:16.0 flags: 00
[ 1.218508] AMD-Vi: DEV_RANGE_END devid: 00:16.2
[ 1.218511] AMD-Vi: DEV_SPECIAL(IOAPIC[9]) devid: 00:14.0
[ 1.218514] AMD-Vi: DEV_SPECIAL(HPET[0]) devid: 00:14.0
[ 1.218517] AMD-Vi: DEV_SPECIAL(IOAPIC[10]) devid: 00:00.1
[ 1.362776] iommu: Adding device 0000:00:00.0 to group 0
[ 1.363161] iommu: Adding device 0000:00:02.0 to group 1
[ 1.363539] iommu: Adding device 0000:00:04.0 to group 2
[ 1.363922] iommu: Adding device 0000:00:09.0 to group 3
[ 1.364304] iommu: Adding device 0000:00:0a.0 to group 4
[ 1.364684] iommu: Adding device 0000:00:0b.0 to group 5
[ 1.365067] iommu: Adding device 0000:00:0d.0 to group 6
[ 1.365446] iommu: Adding device 0000:00:11.0 to group 7
[ 1.365848] iommu: Adding device 0000:00:12.0 to group 8
[ 1.365869] iommu: Adding device 0000:00:12.2 to group 8
[ 1.366267] iommu: Adding device 0000:00:13.0 to group 9
[ 1.366289] iommu: Adding device 0000:00:13.2 to group 9
[ 1.366670] iommu: Adding device 0000:00:14.0 to group 10
[ 1.367056] iommu: Adding device 0000:00:14.1 to group 11
[ 1.367435] iommu: Adding device 0000:00:14.2 to group 12
[ 1.367813] iommu: Adding device 0000:00:14.3 to group 13
[ 1.368229] iommu: Adding device 0000:00:14.4 to group 14
[ 1.368609] iommu: Adding device 0000:00:14.5 to group 15
[ 1.369024] iommu: Adding device 0000:00:15.0 to group 16
[ 1.369049] iommu: Adding device 0000:00:15.1 to group 16
[ 1.369075] iommu: Adding device 0000:00:15.2 to group 16
[ 1.369473] iommu: Adding device 0000:00:16.0 to group 17
[ 1.369497] iommu: Adding device 0000:00:16.2 to group 17
[ 1.369887] iommu: Adding device 0000:01:00.0 to group 18
[ 1.370270] iommu: Adding device 0000:02:00.0 to group 19
[ 1.370280] iommu: Adding device 0000:03:04.0 to group 19
[ 1.370290] iommu: Adding device 0000:04:04.0 to group 19
[ 1.370300] iommu: Adding device 0000:04:05.0 to group 19
[ 1.370311] iommu: Adding device 0000:04:06.0 to group 19
[ 1.370321] iommu: Adding device 0000:04:07.0 to group 19
[ 1.370331] iommu: Adding device 0000:04:08.0 to group 19
[ 1.370342] iommu: Adding device 0000:04:09.0 to group 19
[ 1.370352] iommu: Adding device 0000:04:0a.0 to group 19
[ 1.370362] iommu: Adding device 0000:05:00.0 to group 19
[ 1.370745] iommu: Adding device 0000:06:00.0 to group 20
[ 1.371132] iommu: Adding device 0000:07:00.0 to group 21
[ 1.371514] iommu: Adding device 0000:08:00.0 to group 22
[ 1.371525] iommu: Adding device 0000:09:04.0 to group 22
[ 1.371535] iommu: Adding device 0000:0a:04.0 to group 22
[ 1.371546] iommu: Adding device 0000:0a:05.0 to group 22
[ 1.371556] iommu: Adding device 0000:0a:06.0 to group 22
[ 1.371566] iommu: Adding device 0000:0a:07.0 to group 22
[ 1.371576] iommu: Adding device 0000:0a:08.0 to group 22
[ 1.371586] iommu: Adding device 0000:0a:09.0 to group 22
[ 1.371596] iommu: Adding device 0000:0a:0a.0 to group 22
[ 1.371607] iommu: Adding device 0000:0b:00.0 to group 22
[ 1.371617] iommu: Adding device 0000:0c:00.0 to group 22
[ 1.371628] iommu: Adding device 0000:0d:00.0 to group 22
[ 1.372019] iommu: Adding device 0000:0e:00.0 to group 23
[ 1.372029] iommu: Adding device 0000:0f:04.0 to group 23
[ 1.372039] iommu: Adding device 0000:10:06.0 to group 14
[ 1.372054] iommu: Adding device 0000:11:00.0 to group 16
[ 1.372067] iommu: Adding device 0000:12:00.0 to group 16
[ 1.372079] iommu: Adding device 0000:13:00.0 to group 16
[ 1.372082] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 1.372156] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.374178] perf: AMD NB counters detected
[ 1.374237] LVT offset 0 assigned for vector 0x400
[ 1.374256] perf: AMD IBS detected (0x000000ff)
[ 1.374831] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.375048] Initialise system trusted keyring
[ 1.375177] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 1.375180] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.376574] zbud: loaded
[ 1.376743] VFS: Disk quotas dquot_6.6.0
[ 1.376775] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.377435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.377442] io scheduler noop registered
[ 1.377445] io scheduler deadline registered
[ 1.377471] io scheduler cfq registered (default)
[ 1.378254] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.378262] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.378286] vesafb: mode is 1280x1024x16, linelength=2560, pages=0
[ 1.378289] vesafb: scrolling: redraw
[ 1.378293] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.378300] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override.
[ 1.378311] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90000400000, using 2560k, total 2560k
[ 1.393756] Console: switching to colour frame buffer device 160x64
[ 1.409171] fb0: VESA VGA frame buffer device
[ 1.409284] GHES: HEST is not enabled!
[ 1.409387] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.429996] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.430790] Non-volatile memory driver v1.3
[ 1.430897] Linux agpgart interface v0.103
[ 1.433893] ahci 0000:00:11.0: version 3.0
[ 1.433964] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.434106] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.434741] scsi host0: ahci
[ 1.434883] scsi host1: ahci
[ 1.435010] scsi host2: ahci
[ 1.435137] scsi host3: ahci
[ 1.435225] ata1: SATA max UDMA/133 abar m1024@0xd880b000 port 0xd880b100 irq 19
[ 1.435354] ata2: SATA max UDMA/133 abar m1024@0xd880b000 port 0xd880b180 irq 19
[ 1.435483] ata3: SATA max UDMA/133 abar m1024@0xd880b000 port 0xd880b200 irq 19
[ 1.435612] ata4: SATA max UDMA/133 abar m1024@0xd880b000 port 0xd880b280 irq 19
[ 1.435932] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.436073] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.436500] scsi host4: ahci
[ 1.436635] scsi host5: ahci
[ 1.436724] ata5: SATA max UDMA/133 abar m512@0xde010000 port 0xde010100 irq 29
[ 1.436857] ata6: SATA max UDMA/133 abar m512@0xde010000 port 0xde010180 irq 29
[ 1.437119] ahci 0000:13:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.437259] ahci 0000:13:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.437696] scsi host6: ahci
[ 1.437836] scsi host7: ahci
[ 1.437926] ata7: SATA max UDMA/133 abar m512@0xddd10000 port 0xddd10100 irq 28
[ 1.438054] ata8: SATA max UDMA/133 abar m512@0xddd10000 port 0xddd10180 irq 28
[ 1.438195] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.438311] ehci-pci: EHCI PCI platform driver
[ 1.438461] QUIRK: Enable AMD PLL fix
[ 1.438483] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.438576] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.438705] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.438873] ehci-pci 0000:00:12.2: debug port 1
[ 1.438977] ehci-pci 0000:00:12.2: irq 17, io mem 0xd8809000
[ 1.444849] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.444995] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.445112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.445236] usb usb1: Product: EHCI Host Controller
[ 1.449637] usb usb1: Manufacturer: Linux 4.4.0-lcrs ehci_hcd
[ 1.454052] usb usb1: SerialNumber: 0000:00:12.2
[ 1.458552] hub 1-0:1.0: USB hub found
[ 1.462919] hub 1-0:1.0: 5 ports detected
[ 1.467431] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.471758] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.476179] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.480641] ehci-pci 0000:00:13.2: debug port 1
[ 1.485090] ehci-pci 0000:00:13.2: irq 17, io mem 0xd8807000
[ 1.494844] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.499225] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.503595] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.507986] usb usb2: Product: EHCI Host Controller
[ 1.512391] usb usb2: Manufacturer: Linux 4.4.0-lcrs ehci_hcd
[ 1.516836] usb usb2: SerialNumber: 0000:00:13.2
[ 1.521341] hub 2-0:1.0: USB hub found
[ 1.525719] hub 2-0:1.0: 5 ports detected
[ 1.530229] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.534571] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.538955] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.543365] ehci-pci 0000:00:16.2: debug port 1
[ 1.547697] ehci-pci 0000:00:16.2: irq 17, io mem 0xd8804000
[ 1.557838] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.562056] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.566268] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.570493] usb usb3: Product: EHCI Host Controller
[ 1.574691] usb usb3: Manufacturer: Linux 4.4.0-lcrs ehci_hcd
[ 1.578885] usb usb3: SerialNumber: 0000:00:16.2
[ 1.583113] hub 3-0:1.0: USB hub found
[ 1.587207] hub 3-0:1.0: 4 ports detected
[ 1.591391] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.595485] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.599603] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.603686] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.608061] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.612455] mousedev: PS/2 mouse device common for all mice
[ 1.617935] rtc_cmos 00:05: RTC can wake from S4
[ 1.622397] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.626828] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.631491] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.636083] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.640729] usbcore: registered new interface driver usbhid
[ 1.645264] usbhid: USB HID core driver
[ 1.649938] NET: Registered protocol family 10
[ 1.654508] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.659354] Key type dns_resolver registered
[ 1.664373] microcode: CPU0: patch_level=0x0600063d
[ 1.669015] microcode: CPU1: patch_level=0x0600063d
[ 1.673584] microcode: CPU2: patch_level=0x0600063d
[ 1.678074] microcode: CPU3: patch_level=0x0600063d
[ 1.682568] microcode: CPU4: patch_level=0x0600063d
[ 1.686971] microcode: CPU5: patch_level=0x0600063d
[ 1.691378] microcode: CPU6: patch_level=0x0600063d
[ 1.695690] microcode: CPU7: patch_level=0x0600063d
[ 1.699965] microcode: Microcode Update Driver: v2.01 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
[ 1.704473] registered taskstats version 1
[ 1.708818] Loading compiled-in X.509 certificates
[ 1.713159] zswap: loaded using pool lzo/zbud
[ 1.718128] Magic number: 0:463:129
[ 1.722447] acpi PNP0C02:01: hash matches
[ 1.726758] acpi device:04: hash matches
[ 1.731065] rtc_cmos 00:05: setting system clock to 2016-01-14 13:06:14 UTC (1452776774)
[ 1.741833] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.746199] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.894815] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.898828] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.898854] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.899572] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 1.911979] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.916312] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.920559] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.960222] ata1.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133
[ 1.964394] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.968627] ata4.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
[ 1.972830] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.977067] ata3.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
[ 1.981278] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.985547] ata2.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
[ 1.989809] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.024777] ata2.00: configured for UDMA/133
[ 2.029109] ata1.00: configured for UDMA/133
[ 2.033382] ata4.00: configured for UDMA/133
[ 2.033493] scsi 0:0:0:0: Direct-Access ATA ST3160815AS B PQ: 0 ANSI: 5
[ 2.033644] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.033681] sd 0:0:0:0: [sda] Write Protect is off
[ 2.033685] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.033710] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.033769] scsi 1:0:0:0: Direct-Access ATA ST3160815AS D PQ: 0 ANSI: 5
[ 2.033918] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.033965] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.033967] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.033984] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.072228] ata3.00: configured for UDMA/133
[ 2.076746] scsi 2:0:0:0: Direct-Access ATA ST3160811AS E PQ: 0 ANSI: 5
[ 2.081378] sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.085990] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.086085] scsi 3:0:0:0: Direct-Access ATA ST3160815AS D PQ: 0 ANSI: 5
[ 2.086205] sd 3:0:0:0: [sdd] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.086228] sd 3:0:0:0: [sdd] Write Protect is off
[ 2.086229] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.086238] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.108681] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.108693] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.129298] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.130134] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 >
[ 2.136084] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.142833] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.177760] sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 sdd7 >
[ 2.182356] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 2.207025] sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 >
[ 2.211616] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.373764] tsc: Refined TSC clocksource calibration: 3616.531 MHz
[ 2.377998] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x342153952fd, max_idle_ns: 440795386796 ns
[ 3.381741] clocksource: Switched to clocksource tsc
[ 6.898365] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 7.360326] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.364839] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.369344] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 7.373948] ata8: limiting SATA link speed to 1.5 Gbps
[ 12.363887] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 12.368673] ata7: limiting SATA link speed to 1.5 Gbps
[ 12.832841] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.837682] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.842392] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 17.836405] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 18.299357] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 18.304107] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 18.315036] Freeing unused kernel memory: 984K (ffffffff80ecf000 - ffffffff80fc5000)
[ 18.319835] Write protecting the kernel read-only data: 12288k
[ 18.325175] Freeing unused kernel memory: 1972K (ffff880000813000 - ffff880000a00000)
[ 18.332104] Freeing unused kernel memory: 1132K (ffff880000ce5000 - ffff880000e00000)
[ 18.338382] random: systemd urandom read with 88 bits of entropy available
[ 18.343479] systemd[1]: systemd 210 running in system mode. (+PAM -LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP +APPARMOR)
[ 18.348811] systemd[1]: Detected architecture 'x86-64'.
[ 18.353984] systemd[1]: Running in initial RAM disk.
[ 18.375285] systemd[1]: Inserted module 'autofs4'
[ 18.380634] systemd[1]: Set hostname to <harley>.
[ 18.418283] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dST3160815AS_6RACD7A6\x2dpart5.device...
[ 18.429155] systemd[1]: Starting Timers.
[ 18.439954] systemd[1]: Reached target Timers.
[ 18.445334] systemd[1]: Starting -.slice.
[ 18.463505] systemd[1]: Created slice -.slice.
[ 18.468885] systemd[1]: Starting udev Control Socket.
[ 18.479746] systemd[1]: Listening on udev Control Socket.
[ 18.485151] systemd[1]: Starting udev Kernel Socket.
[ 18.495904] systemd[1]: Listening on udev Kernel Socket.
[ 18.501240] systemd[1]: Starting Journal Socket.
[ 18.511831] systemd[1]: Listening on Journal Socket.
[ 18.517109] systemd[1]: Starting Sockets.
[ 18.527460] systemd[1]: Reached target Sockets.
[ 18.532590] systemd[1]: Starting System Slice.
[ 18.542817] systemd[1]: Created slice System Slice.
[ 18.547874] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 18.558060] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 18.563284] systemd[1]: Starting dracut cmdline hook...
[ 18.579499] systemd[1]: Starting Load Kernel Modules...
[ 18.590210] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 18.596162] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.596194] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 18.596224] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 18.596254] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 18.622681] systemd[1]: Starting Journal Service...
[ 18.633159] systemd[1]: Starting Slices.
[ 18.643389] systemd[1]: Reached target Slices.
[ 18.648454] systemd[1]: Starting Setup Virtual Console...
[ 18.662414] systemd[1]: Starting Swap.
[ 18.672303] systemd[1]: Reached target Swap.
[ 18.677295] systemd[1]: Starting Local File Systems.
[ 18.687321] systemd[1]: Reached target Local File Systems.
[ 18.712760] systemd[1]: Started Journal Service.
[ 18.827417] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 18.833635] ACPI: Power Button [PWRB]
[ 18.838236] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 18.838331] ohci-pci: OHCI PCI platform driver
[ 18.838588] ACPI: Power Button [PWRF]
[ 18.839015] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 18.839027] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 18.839061] ohci-pci 0000:00:12.0: irq 18, io mem 0xd880a000
[ 18.841810] wmi: Mapper loaded
[ 18.868305] random: nonblocking pool is initialized
[ 18.893734] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 18.893736] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.893737] usb usb4: Product: OHCI PCI host controller
[ 18.893738] usb usb4: Manufacturer: Linux 4.4.0-lcrs ohci_hcd
[ 18.893738] usb usb4: SerialNumber: 0000:00:12.0
[ 18.893848] hub 4-0:1.0: USB hub found
[ 18.893857] hub 4-0:1.0: 5 ports detected
[ 18.895080] scsi host9: pata_atiixp
[ 18.895162] scsi host10: pata_atiixp
[ 18.895203] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 18.895203] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 18.895387] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 18.895392] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 18.895412] ohci-pci 0000:00:13.0: irq 18, io mem 0xd8808000
[ 18.950454] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 18.950455] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.950456] usb usb5: Product: OHCI PCI host controller
[ 18.950457] usb usb5: Manufacturer: Linux 4.4.0-lcrs ohci_hcd
[ 18.950457] usb usb5: SerialNumber: 0000:00:13.0
[ 18.950566] hub 5-0:1.0: USB hub found
[ 18.950574] hub 5-0:1.0: 5 ports detected
[ 18.950770] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 18.950774] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 18.950792] ohci-pci 0000:00:14.5: irq 18, io mem 0xd8806000
[ 19.006777] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 19.011355] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.011357] usb usb6: Product: OHCI PCI host controller
[ 19.011358] usb usb6: Manufacturer: Linux 4.4.0-lcrs ohci_hcd
[ 19.011359] usb usb6: SerialNumber: 0000:00:14.5
[ 19.011490] hub 6-0:1.0: USB hub found
[ 19.011499] hub 6-0:1.0: 2 ports detected
[ 19.011702] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 19.011707] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 19.011728] ohci-pci 0000:00:16.0: irq 18, io mem 0xd8805000
[ 19.064525] ata9.00: ATAPI: SONY DVD RW AD-7260S, 1.61, max UDMA/100
[ 19.066370] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 19.066372] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.066373] usb usb7: Product: OHCI PCI host controller
[ 19.066374] usb usb7: Manufacturer: Linux 4.4.0-lcrs ohci_hcd
[ 19.066375] usb usb7: SerialNumber: 0000:00:16.0
[ 19.066506] hub 7-0:1.0: USB hub found
[ 19.066515] hub 7-0:1.0: 4 ports detected
[ 19.102028] ata9.01: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 19.102029] ata9.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 19.102032] ata9.00: limited to UDMA/33 due to 40-wire cable
[ 19.102033] ata9.01: limited to UDMA/33 due to 40-wire cable
[ 19.107708] ata9.00: configured for UDMA/33
[ 19.113926] ata9.01: configured for UDMA/33
[ 19.115895] scsi 9:0:0:0: CD-ROM SONY DVD RW AD-7260S 1.61 PQ: 0 ANSI: 5
[ 19.127122] scsi 9:0:0:0: Attached scsi generic sg4 type 5
[ 19.127324] scsi 9:0:1:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 19.127581] sd 9:0:1:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 19.127598] sd 9:0:1:0: Attached scsi generic sg5 type 0
[ 19.127830] sd 9:0:1:0: [sde] Write Protect is off
[ 19.127913] sd 9:0:1:0: [sde] Mode Sense: 00 3a 00 00
[ 19.127925] sd 9:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.152969] sde: sde1
[ 19.153171] sd 9:0:1:0: [sde] Attached SCSI disk
[ 19.166953] sr 9:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 19.167105] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 19.167402] sr 9:0:0:0: Attached scsi CD-ROM sr0
[ 19.216280] usb 4-4: new low-speed USB device number 2 using ohci-pci
[ 19.367287] usb 4-4: New USB device found, idVendor=046d, idProduct=c00e
[ 19.367420] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 19.367544] usb 4-4: Product: USB-PS/2 Optical Mouse
[ 19.367645] usb 4-4: Manufacturer: Logitech
[ 19.375520] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/0003:046D:C00E.0001/input/input3
[ 19.375835] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-4/input0
[ 23.971856] scsi host11: Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
<Adaptec 29320LPE PCIe Ultra320 SCSI adapter>
aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
[ 23.981503] scsi 11:0:0:0: Direct-Access SEAGATE ST15150N 5055 PQ: 0 ANSI: 2
[ 23.981648] scsi target11:0:0: asynchronous
[ 23.981720] scsi11:A:0:0: Tagged Queuing enabled. Depth 32
[ 23.981821] scsi target11:0:0: Beginning Domain Validation
[ 24.002049] scsi target11:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[ 24.016356] scsi target11:0:0: Domain Validation skipping write tests
[ 24.016469] scsi target11:0:0: Ending Domain Validation
[ 24.016756] sd 11:0:0:0: Attached scsi generic sg6 type 0
[ 24.035140] sd 11:0:0:0: [sdf] Unsupported sector size 768.
[ 24.035240] sd 11:0:0:0: [sdf] 0 512-byte logical blocks: (0 B/0 B)
[ 24.035348] sd 11:0:0:0: [sdf] 768-byte physical blocks
[ 24.041675] sd 11:0:0:0: [sdf] Write Protect is off
[ 24.041760] sd 11:0:0:0: [sdf] Mode Sense: ab 00 10 08
[ 24.042324] scsi 11:0:1:0: Direct-Access SEAGATE ST15150N 5055 PQ: 0 ANSI: 2
[ 24.042468] scsi target11:0:1: asynchronous
[ 24.042540] scsi11:A:1:0: Tagged Queuing enabled. Depth 32
[ 24.042640] scsi target11:0:1: Beginning Domain Validation
[ 24.049153] sd 11:0:0:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 24.058670] sd 11:0:0:0: [sdf] Unsupported sector size 768.
[ 24.063581] scsi target11:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[ 24.075190] sd 11:0:0:0: [sdf] Attached SCSI disk
[ 24.078969] scsi target11:0:1: Domain Validation skipping write tests
[ 24.079082] scsi target11:0:1: Ending Domain Validation
[ 24.079357] sd 11:0:1:0: Attached scsi generic sg7 type 0
[ 24.353428] sd 11:0:1:0: [sdg] Unsupported sector size 768.
[ 24.353527] sd 11:0:1:0: [sdg] 0 512-byte logical blocks: (0 B/0 B)
[ 24.353635] sd 11:0:1:0: [sdg] 768-byte physical blocks
[ 24.355324] scsi 11:0:3:0: Sequential-Access SONY SDT-10000 0110 PQ: 0 ANSI: 2
[ 24.355469] scsi target11:0:3: asynchronous
[ 24.355542] scsi target11:0:3: Beginning Domain Validation
[ 24.363006] sd 11:0:1:0: [sdg] Write Protect is off
[ 24.363091] sd 11:0:1:0: [sdg] Mode Sense: ab 00 10 08
[ 24.363672] scsi target11:0:3: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
[ 24.369079] scsi target11:0:3: Domain Validation skipping write tests
[ 24.369191] scsi target11:0:3: Ending Domain Validation
[ 24.373365] sd 11:0:1:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 24.379770] scsi 11:0:3:0: Attached scsi generic sg8 type 1
[ 24.383305] sd 11:0:1:0: [sdg] Unsupported sector size 768.
[ 25.677812] sd 11:0:1:0: [sdg] Attached SCSI disk
[ 33.873980] scsi host8: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
[ 34.162432] scsi 8:0:1:0: Sequential-Access HP 88780 A674 PQ: 0 ANSI: 1 CCS
[ 34.167929] scsi target8:0:1: Beginning Domain Validation
[ 34.191636] scsi target8:0:1: Ending Domain Validation
[ 34.197183] scsi 8:0:1:0: Attached scsi generic sg9 type 1
[ 35.818480] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 36.099734] systemd-journald[229]: Received SIGTERM from PID 1 (systemd).
[ 38.297819] device-mapper: uevent: version 1.0.3
[ 38.302869] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 39.585739] systemd-readahead[511]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 40.870793] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 42.021407] Warning: Processor Platform Limit event detected, but not handled.
[ 42.024952] Consider compiling CPUfreq support into your kernel.
[ 42.165701] AVX version of gcm_enc/dec engaged.
[ 42.169285] AES CTR mode by8 optimization enabled
[ 43.177315] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 43.265686] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 43.269465] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 43.646754] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 43.680651] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 44.587474] EXT4-fs (sde1): mounting ext3 file system using the ext4 subsystem
[ 44.611755] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[ 44.693187] dgap: module is from the staging directory, the quality is unknown, you have been warned.
[ 44.698166] dgap: dgap-1.3-16, Digi International Part Number 40002347_C
[ 44.703033] dgap: For the tools package please visit http://www.digi.com
[ 44.708252] dgap: dgap: board 0: AccelePort Xr920 8 port (rev 1), irq 32
[ 44.784136] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 44.784142] r8169 0000:11:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 44.784645] r8169 0000:11:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000046000, 74:d4:35:1f:b2:9e, XID 0c900800 IRQ 33
[ 44.784646] r8169 0000:11:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 44.809104] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 44.816231] st 11:0:3:0: Attached scsi tape st0
[ 44.816233] st 11:0:3:0: st0: try direct i/o: yes (alignment 4 B)
[ 44.816555] st 8:0:1:0: Attached scsi tape st1
[ 44.816556] st 8:0:1:0: st1: try direct i/o: yes (alignment 4 B)
[ 44.962632] EXT4-fs (sdd5): mounting ext3 file system using the ext4 subsystem
[ 45.016009] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: (null)
[ 45.282613] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 45.288615] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 8
[ 45.294721] xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[ 45.301051] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 45.307572] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 45.313760] usb usb8: Product: xHCI Host Controller
[ 45.319753] usb usb8: Manufacturer: Linux 4.4.0-lcrs xhci-hcd
[ 45.325741] usb usb8: SerialNumber: 0000:06:00.0
[ 45.331771] hub 8-0:1.0: USB hub found
[ 45.337651] hub 8-0:1.0: 2 ports detected
[ 45.343520] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 45.349243] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 9
[ 45.354979] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 45.360718] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 45.366396] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 45.366397] usb usb9: Product: xHCI Host Controller
[ 45.366398] usb usb9: Manufacturer: Linux 4.4.0-lcrs xhci-hcd
[ 45.366399] usb usb9: SerialNumber: 0000:06:00.0
[ 45.366510] hub 9-0:1.0: USB hub found
[ 45.366518] hub 9-0:1.0: 2 ports detected
[ 45.366681] xhci_hcd 0000:12:00.0: xHCI Host Controller
[ 45.366685] xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 10
[ 45.366841] xhci_hcd 0000:12:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[ 45.367004] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 45.367005] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 45.367006] usb usb10: Product: xHCI Host Controller
[ 45.367007] usb usb10: Manufacturer: Linux 4.4.0-lcrs xhci-hcd
[ 45.367007] usb usb10: SerialNumber: 0000:12:00.0
[ 45.367137] hub 10-0:1.0: USB hub found
[ 45.367145] hub 10-0:1.0: 2 ports detected
[ 45.367274] xhci_hcd 0000:12:00.0: xHCI Host Controller
[ 45.367276] xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 11
[ 45.367291] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
[ 45.367306] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[ 45.367307] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 45.367308] usb usb11: Product: xHCI Host Controller
[ 45.367308] usb usb11: Manufacturer: Linux 4.4.0-lcrs xhci-hcd
[ 45.367309] usb usb11: SerialNumber: 0000:12:00.0
[ 45.367406] hub 11-0:1.0: USB hub found
[ 45.367415] hub 11-0:1.0: 2 ports detected
[ 45.460280] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 45.519952] osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.1.1.1 2016/01/12 18:56:18 markh Exp $
[ 45.810117] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 45.832284] EXT4-fs (sdd6): mounting ext3 file system using the ext4 subsystem
[ 45.882432] EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: (null)
[ 45.887471] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 45.959823] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 46.074975] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 46.158993] EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem
[ 46.194815] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 46.377048] [drm] Initialized drm 1.1.0 20060810
[ 46.404829] EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 46.439118] EXT4-fs (sdd7): mounting ext3 file system using the ext4 subsystem
[ 46.469830] EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 46.504297] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: (null)
[ 46.521607] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 46.918466] Adding 8385532k swap on /dev/sda2. Priority:-1 extents:1 across:8385532k FS
[ 47.300886] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 47.306818] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 47.312776] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 47.318683] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 47.324611] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 47.330449] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 47.336187] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 47.341875] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 47.347495] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 47.371456] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 47.371692] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 47.371756] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 47.371823] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 47.371886] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 47.371949] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 47.372011] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 47.372072] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 48.396793] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 48.668346] kvm: disabled by bios
[ 48.680039] kvm: disabled by bios
[ 48.695049] kvm: disabled by bios
[ 48.710038] kvm: disabled by bios
[ 48.722018] kvm: disabled by bios
[ 48.740014] kvm: disabled by bios
[ 48.763021] kvm: disabled by bios
[ 48.781011] kvm: disabled by bios
[ 49.425702] 3c59x: Donald Becker and others.
[ 49.431265] 0000:0a:04.0: 3Com PCI 3c905C Tornado at ffffc9000003a000.
[ 49.437073] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 49.805426] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 129.698358] systemd-journald[514]: Received request to flush runtime journal from PID 1
[ 130.808424] systemd[1]: Unit apparmor.service entered failed state.
[ 130.831389] systemd[1]: Received SIGRTMIN+21 from PID 355 (plymouthd).
These appear to be the 2 failing disks
#dmesg | grep -i fail
[ 1.899572] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 6.898365] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 7.369344] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 12.363887] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 12.842392] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 17.836405] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
Here are the pci-ids of the Marvel chips
#lspci | grep -i marvel
07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
13:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
Regards
Mark
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160113030950.GB11902-0VdLhd/A9PlfpSRLqpFUpR/sF2h8X+2i0E9HWUfgJXw@public.gmane.org>
2016-01-13 14:42 ` Mark Hounschell
@ 2016-01-20 12:31 ` Joerg Roedel
[not found] ` <20160120123116.GF18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
1 sibling, 1 reply; 32+ messages in thread
From: Joerg Roedel @ 2016-01-20 12:31 UTC (permalink / raw)
To: Baoquan He; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi Baoquan,
On Wed, Jan 13, 2016 at 11:09:50AM +0800, Baoquan He wrote:
> Seems 0f:00.0 is not attached to a group so that it get a domain. Can
> you also paste your "lspci -t" and "lspci -vvv" output? Here 0f:00.0
> should be a pci bridge which need set the same domain with its
> peripheral 0000:0f:04.0.
>
> Please apply this patch and try again.
Thanks for the fix, mind submitting it so that I can queue it and send
it upstream after the merge window closes?
Joerg
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160120123116.GF18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2016-01-20 13:03 ` Mark Hounschell
[not found] ` <569F858E.4060701-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-01-20 13:03 ` Baoquan He
1 sibling, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-01-20 13:03 UTC (permalink / raw)
To: Joerg Roedel, Baoquan He
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/20/2016 07:31 AM, Joerg Roedel wrote:
> Hi Baoquan,
>
> On Wed, Jan 13, 2016 at 11:09:50AM +0800, Baoquan He wrote:
>> Seems 0f:00.0 is not attached to a group so that it get a domain. Can
>> you also paste your "lspci -t" and "lspci -vvv" output? Here 0f:00.0
>> should be a pci bridge which need set the same domain with its
>> peripheral 0000:0f:04.0.
>>
>> Please apply this patch and try again.
>
> Thanks for the fix, mind submitting it so that I can queue it and send
> it upstream after the merge window closes?
>
>
>
> Joerg
I suspect the fix is just not complete yet as my box is still hosed.
Mark
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160120123116.GF18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-01-20 13:03 ` Mark Hounschell
@ 2016-01-20 13:03 ` Baoquan He
1 sibling, 0 replies; 32+ messages in thread
From: Baoquan He @ 2016-01-20 13:03 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/20/16 at 01:31pm, Joerg Roedel wrote:
> Hi Baoquan,
>
> On Wed, Jan 13, 2016 at 11:09:50AM +0800, Baoquan He wrote:
> > Seems 0f:00.0 is not attached to a group so that it get a domain. Can
> > you also paste your "lspci -t" and "lspci -vvv" output? Here 0f:00.0
> > should be a pci bridge which need set the same domain with its
> > peripheral 0000:0f:04.0.
> >
> > Please apply this patch and try again.
>
> Thanks for the fix, mind submitting it so that I can queue it and send
> it upstream after the merge window closes?
Sure, let me do it now.
However I still didn't figure out why 2 of 8 sata disks can't be
brought up on Mark's machine. Do you have any clues about it?
Thanks
Baoquan
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <569F858E.4060701-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-01-20 13:18 ` Baoquan He
0 siblings, 0 replies; 32+ messages in thread
From: Baoquan He @ 2016-01-20 13:18 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/20/16 at 08:03am, Mark Hounschell wrote:
> On 01/20/2016 07:31 AM, Joerg Roedel wrote:
> >Hi Baoquan,
> >
> >On Wed, Jan 13, 2016 at 11:09:50AM +0800, Baoquan He wrote:
> >>Seems 0f:00.0 is not attached to a group so that it get a domain. Can
> >>you also paste your "lspci -t" and "lspci -vvv" output? Here 0f:00.0
> >>should be a pci bridge which need set the same domain with its
> >>peripheral 0000:0f:04.0.
> >>
> >>Please apply this patch and try again.
> >
> >Thanks for the fix, mind submitting it so that I can queue it and send
> >it upstream after the merge window closes?
> >
> >
> >
> > Joerg
>
> I suspect the fix is just not complete yet as my box is still hosed.
No, the io_page_fault is caused by the not correct alias setting so that
the scsi storage controller like 0f:04.0/0a:0a.0 can't be handled
correclty. You can see that their alias are 0f:00.0 and 09:00.0 which
are reported in io_page_fualt.
But the other 2 disks still didn't come up, I suspect if the irq is not
set right. This should be another different issue, no any idea yet.
Thanks
Baoquan
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <5697AAD8.1000105-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-01-20 15:38 ` Joerg Roedel
[not found] ` <20160120153823.GG18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Joerg Roedel @ 2016-01-20 15:38 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Thu, Jan 14, 2016 at 09:04:08AM -0500, Mark Hounschell wrote:
> OK, I verified the 2 disks are hanging off the Marvel chips.
> Here is the dmesg from booting with your patch and the 2
> disks not showing up.
Does it boot with iommu=soft?
> These appear to be the 2 failing disks
> #dmesg | grep -i fail
> [ 1.899572] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
> [ 6.898365] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
> [ 7.369344] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
> [ 12.363887] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
> [ 12.842392] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
> [ 17.836405] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
The err_mask indicates that the device fetched an invalid command, so
likely it read some garbage from memory it shouldn't read it from.
Unfortunatly there are no IO_PAGE_FAULTs which could give us any clue.
> Here are the pci-ids of the Marvel chips
> #lspci | grep -i marvel
> 07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
> 13:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
Your disks seem to be connected to the SATA controler at 13:00.0, which
is in an iommu group with devices 00:15.*, 00:11.0 and 00:12.0.
For testing you could try to connect the disks to the SATA controler at
07:00.0. This one is alone in its group.
Otherwise it would be good if you could bisect the issue to find the
broken commit.
Joerg
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160120153823.GG18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2016-01-20 15:46 ` Joerg Roedel
[not found] ` <20160120154658.GH18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-01-20 15:56 ` Mark Hounschell
1 sibling, 1 reply; 32+ messages in thread
From: Joerg Roedel @ 2016-01-20 15:46 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Wed, Jan 20, 2016 at 04:38:23PM +0100, Joerg Roedel wrote:
> On Thu, Jan 14, 2016 at 09:04:08AM -0500, Mark Hounschell wrote:
> > OK, I verified the 2 disks are hanging off the Marvel chips.
> > Here is the dmesg from booting with your patch and the 2
> > disks not showing up.
>
> Does it boot with iommu=soft?
Something also worth trying is amd_iommu=fullflush (without iommu=soft).
Would be great if you find the time to test these two parameters and
report back.
Joerg
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160120153823.GG18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-01-20 15:46 ` Joerg Roedel
@ 2016-01-20 15:56 ` Mark Hounschell
1 sibling, 0 replies; 32+ messages in thread
From: Mark Hounschell @ 2016-01-20 15:56 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/20/2016 10:38 AM, Joerg Roedel wrote:
> On Thu, Jan 14, 2016 at 09:04:08AM -0500, Mark Hounschell wrote:
>> OK, I verified the 2 disks are hanging off the Marvel chips.
>> Here is the dmesg from booting with your patch and the 2
>> disks not showing up.
>
> Does it boot with iommu=soft?
>
Yes. It does boot with iommu=soft
>> These appear to be the 2 failing disks
>> #dmesg | grep -i fail
>> [ 1.899572] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
>> [ 6.898365] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
>> [ 7.369344] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
>> [ 12.363887] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
>> [ 12.842392] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
>> [ 17.836405] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
>
> The err_mask indicates that the device fetched an invalid command, so
> likely it read some garbage from memory it shouldn't read it from.
> Unfortunatly there are no IO_PAGE_FAULTs which could give us any clue.
>
>> Here are the pci-ids of the Marvel chips
>> #lspci | grep -i marvel
>> 07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
>> 13:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
>
> Your disks seem to be connected to the SATA controler at 13:00.0, which
> is in an iommu group with devices 00:15.*, 00:11.0 and 00:12.0.
>
> For testing you could try to connect the disks to the SATA controler at
> 07:00.0. This one is alone in its group.
>
That one must be the 2 external sata ports. I can't easily connect to
them as I have no external sata drives.
> Otherwise it would be good if you could bisect the issue to find the
> broken commit.
>
I can do this if there is no other option for me.
Mark
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160120154658.GH18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2016-01-20 16:04 ` Mark Hounschell
[not found] ` <569FB013.4050709-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-01-20 16:04 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/20/2016 10:46 AM, Joerg Roedel wrote:
> On Wed, Jan 20, 2016 at 04:38:23PM +0100, Joerg Roedel wrote:
>> On Thu, Jan 14, 2016 at 09:04:08AM -0500, Mark Hounschell wrote:
>>> OK, I verified the 2 disks are hanging off the Marvel chips.
>>> Here is the dmesg from booting with your patch and the 2
>>> disks not showing up.
>>
>> Does it boot with iommu=soft?
>
> Something also worth trying is amd_iommu=fullflush (without iommu=soft).
> Would be great if you find the time to test these two parameters and
> report back.
>
>
amd_iommu=fullflush does not help.
iommu=soft allows it to boot
Mark
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <569FB013.4050709-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-01-20 16:19 ` Joerg Roedel
[not found] ` <20160120161904.GI18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Joerg Roedel @ 2016-01-20 16:19 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Wed, Jan 20, 2016 at 11:04:35AM -0500, Mark Hounschell wrote:
>
> amd_iommu=fullflush does not help.
>
> iommu=soft allows it to boot
Okay, good to know, so it is not an issue with stale TLB entries in the
IOMMU.
Thanks,
Joerg
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160120161904.GI18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2016-01-20 18:19 ` Mark Hounschell
[not found] ` <569FCFC8.2000606-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-01-20 18:19 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/20/2016 11:19 AM, Joerg Roedel wrote:
> On Wed, Jan 20, 2016 at 11:04:35AM -0500, Mark Hounschell wrote:
>>
>> amd_iommu=fullflush does not help.
>>
>> iommu=soft allows it to boot
>
> Okay, good to know, so it is not an issue with stale TLB entries in the
> IOMMU.
>
>
> Thanks,
>
> Joerg
>
>
Would you like me to do anything more right now?
Mark
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <569FCFC8.2000606-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-01-20 18:26 ` Joerg Roedel
[not found] ` <20160120182602.GJ18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Joerg Roedel @ 2016-01-20 18:26 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Wed, Jan 20, 2016 at 01:19:52PM -0500, Mark Hounschell wrote:
>
> Would you like me to do anything more right now?
Would be great if you find the time to bisect the issue.
To speed thing up you can test commit b67ad2f and use it as the bad one
if it shows the same problem.
As good commit you can use the v4.3 tag, this will only bisect in the
iommu related changes which went into v4.4-rc1.
If commit b67ad2f works for you, then please bisect between v4.3 and
v4.4.
Joerg
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160120182602.GJ18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2016-01-20 19:32 ` Mark Hounschell
[not found] ` <569FE0B0.4030902-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-01-21 14:50 ` Mark Hounschell
1 sibling, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-01-20 19:32 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/20/2016 01:26 PM, Joerg Roedel wrote:
> On Wed, Jan 20, 2016 at 01:19:52PM -0500, Mark Hounschell wrote:
>>
>> Would you like me to do anything more right now?
>
> Would be great if you find the time to bisect the issue.
>
> To speed thing up you can test commit b67ad2f and use it as the bad one
> if it shows the same problem.
>
> As good commit you can use the v4.3 tag, this will only bisect in the
> iommu related changes which went into v4.4-rc1.
>
> If commit b67ad2f works for you, then please bisect between v4.3 and
> v4.4.
>
>
> Joerg
>
>
Should I use Linus's tree or your tree? If yours, where??
mark
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <569FE0B0.4030902-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-01-20 20:30 ` Joerg Roedel
0 siblings, 0 replies; 32+ messages in thread
From: Joerg Roedel @ 2016-01-20 20:30 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Wed, Jan 20, 2016 at 02:32:00PM -0500, Mark Hounschell wrote:
> Should I use Linus's tree or your tree? If yours, where??
The commits are in Linus's tree, so you can use that one.
Joerg
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160120182602.GJ18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-01-20 19:32 ` Mark Hounschell
@ 2016-01-21 14:50 ` Mark Hounschell
[not found] ` <56A0F03C.8010109-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
1 sibling, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-01-21 14:50 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/20/2016 01:26 PM, Joerg Roedel wrote:
> On Wed, Jan 20, 2016 at 01:19:52PM -0500, Mark Hounschell wrote:
>>
>> Would you like me to do anything more right now?
>
> Would be great if you find the time to bisect the issue.
>
> To speed thing up you can test commit b67ad2f and use it as the bad one
> if it shows the same problem.
>
> As good commit you can use the v4.3 tag, this will only bisect in the
> iommu related changes which went into v4.4-rc1.
>
> If commit b67ad2f works for you, then please bisect between v4.3 and
> v4.4.
>
>
> Joerg
>
>
Here ya go.
150952f96941cb13371770ce0cf47906647d8bba is the first bad commit
commit 150952f96941cb13371770ce0cf47906647d8bba
Author: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
Date: Tue Oct 20 17:33:35 2015 +0200
iommu/amd: Do not iterate over alias-list in __[attach|detach]_device
The alias list is handled aleady by iommu core code. No need
anymore to handle it in this part of the AMD IOMMU code
Signed-off-by: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
:040000 040000 334ffdc0d7ff9389478d3ce6096eb81227d8eafc
cb6fce5d7e94ce3e44a6a64092ba8eb32dd0978b M drivers
Mark
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <56A0F03C.8010109-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-01-21 14:58 ` Mark Hounschell
[not found] ` <56A0F221.10502-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-01-21 14:58 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/21/2016 09:50 AM, Mark Hounschell wrote:
> On 01/20/2016 01:26 PM, Joerg Roedel wrote:
>> On Wed, Jan 20, 2016 at 01:19:52PM -0500, Mark Hounschell wrote:
>>>
>>> Would you like me to do anything more right now?
>>
>> Would be great if you find the time to bisect the issue.
>>
>> To speed thing up you can test commit b67ad2f and use it as the bad one
>> if it shows the same problem.
>>
>> As good commit you can use the v4.3 tag, this will only bisect in the
>> iommu related changes which went into v4.4-rc1.
>>
>> If commit b67ad2f works for you, then please bisect between v4.3 and
>> v4.4.
>>
>>
>> Joerg
>>
>>
>
> Here ya go.
>
> 150952f96941cb13371770ce0cf47906647d8bba is the first bad commit
> commit 150952f96941cb13371770ce0cf47906647d8bba
> Author: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
> Date: Tue Oct 20 17:33:35 2015 +0200
>
> iommu/amd: Do not iterate over alias-list in __[attach|detach]_device
>
> The alias list is handled aleady by iommu core code. No need
> anymore to handle it in this part of the AMD IOMMU code
>
> Signed-off-by: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
>
> :040000 040000 334ffdc0d7ff9389478d3ce6096eb81227d8eafc
> cb6fce5d7e94ce3e44a6a64092ba8eb32dd0978b M drivers
>
FYI, this commit also had tons of IO_PAGE_FAULTS booting but eventually
all the disks but the 2 in question actually ended up being mounted.
Mark
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <56A0F221.10502-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-01-21 22:39 ` Joerg Roedel
[not found] ` <20160121223958.GL18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Joerg Roedel @ 2016-01-21 22:39 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Thu, Jan 21, 2016 at 09:58:41AM -0500, Mark Hounschell wrote:
> >Here ya go.
> >
> >150952f96941cb13371770ce0cf47906647d8bba is the first bad commit
> >commit 150952f96941cb13371770ce0cf47906647d8bba
> >Author: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
> >Date: Tue Oct 20 17:33:35 2015 +0200
> >
> > iommu/amd: Do not iterate over alias-list in __[attach|detach]_device
> >
> > The alias list is handled aleady by iommu core code. No need
> > anymore to handle it in this part of the AMD IOMMU code
> >
> > Signed-off-by: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
> >
> >:040000 040000 334ffdc0d7ff9389478d3ce6096eb81227d8eafc
> >cb6fce5d7e94ce3e44a6a64092ba8eb32dd0978b M drivers
> >
>
> FYI, this commit also had tons of IO_PAGE_FAULTS booting but
> eventually all the disks but the 2 in question actually ended up
> being mounted.
I see, thanks for your effort. I'll take a closer look and hopefully
come up with a fix for you to test.
Joerg
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160121223958.GL18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2016-02-02 15:49 ` Mark Hounschell
[not found] ` <56B0CFF7.80907-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-02-02 15:49 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 01/21/2016 05:39 PM, Joerg Roedel wrote:
> On Thu, Jan 21, 2016 at 09:58:41AM -0500, Mark Hounschell wrote:
>>> Here ya go.
>>>
>>> 150952f96941cb13371770ce0cf47906647d8bba is the first bad commit
>>> commit 150952f96941cb13371770ce0cf47906647d8bba
>>> Author: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
>>> Date: Tue Oct 20 17:33:35 2015 +0200
>>>
>>> iommu/amd: Do not iterate over alias-list in __[attach|detach]_device
>>>
>>> The alias list is handled aleady by iommu core code. No need
>>> anymore to handle it in this part of the AMD IOMMU code
>>>
>>> Signed-off-by: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
>>>
>>> :040000 040000 334ffdc0d7ff9389478d3ce6096eb81227d8eafc
>>> cb6fce5d7e94ce3e44a6a64092ba8eb32dd0978b M drivers
>>>
>>
>> FYI, this commit also had tons of IO_PAGE_FAULTS booting but
>> eventually all the disks but the 2 in question actually ended up
>> being mounted.
>
> I see, thanks for your effort. I'll take a closer look and hopefully
> come up with a fix for you to test.
>
>
> Joerg
>
>
Hey Joerg,
Just wondering if this issue is still being considered?
Regards
Mark
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <56B0CFF7.80907-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-02-16 16:24 ` Joerg Roedel
[not found] ` <20160216162455.GX18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Joerg Roedel @ 2016-02-16 16:24 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Tue, Feb 02, 2016 at 10:49:11AM -0500, Mark Hounschell wrote:
> Just wondering if this issue is still being considered?
Yes it is, I just went through a move and have a few other issues on the
plate. But I this is still on the list.
Joerg
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160216162455.GX18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2016-02-16 17:32 ` Mark Hounschell
[not found] ` <56C35D1A.9080307-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-02-16 17:32 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 02/16/2016 11:24 AM, Joerg Roedel wrote:
> On Tue, Feb 02, 2016 at 10:49:11AM -0500, Mark Hounschell wrote:
>> Just wondering if this issue is still being considered?
>
> Yes it is, I just went through a move and have a few other issues on the
> plate. But I this is still on the list.
>
>
>
Thanks, I'll be standing by.
Mark
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <56C35D1A.9080307-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-02-26 16:23 ` Joerg Roedel
[not found] ` <20160226162319.GH22747-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Joerg Roedel @ 2016-02-26 16:23 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi Mark,
On Tue, Feb 16, 2016 at 12:32:10PM -0500, Mark Hounschell wrote:
> Thanks, I'll be standing by.
I am pretty sure I have seen a dmesg from your machine when it runs into
this issue, but somehow I can't find it anymore.
Can you please boot a v4.5-rc5 kernel with iommu enabled and
'amd_iommu_dump' on the kernel command line and send me dmesg after
boot again?
Thanks a lot,
Joerg
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160226162319.GH22747-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2016-02-26 19:20 ` Mark Hounschell
[not found] ` <56D0A565.8080406-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-02-26 19:20 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 02/26/2016 11:23 AM, Joerg Roedel wrote:
> Can you please boot a v4.5-rc5 kernel with iommu enabled and
> 'amd_iommu_dump' on the kernel command line and send me dmesg after
> boot again?
>
>
Here ya go Joerg,
See ata7 and ata8 failure messages. These are the 2 disks that don't come up. They are hanging off one of these two Marvell chips.
07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
13:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
One of these is for 2 internal ports (the ones I use) and the other is for two external ports not in use.
Regards
Mark
[ 0.000000] Linux version 4.5.0-rc5 (root@harley) (gcc version 4.8.3 20140627 [gcc-4_8-branch revision 212064] (SUSE Linux) ) #1 SMP PREEMPT Fri Feb 26 13:48:57 EST 2016
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.5.0-rc5 root=/dev/disk/by-id/ata-ST3160815AS_6RACD7A6-part5 splash=verbose showopts video=1600x1200 noresume apm=off vmalloc=256M cma=64M@0-4G amd_iommu_dump
[ 0.000000] tseg: 00af800000
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ae474fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae475000-0x00000000aea32fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aea33000-0x00000000aee2efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aee2f000-0x00000000af154fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000af155000-0x00000000af155fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af156000-0x00000000af35bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000af35c000-0x00000000af7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000044fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD5, BIOS FB 01/23/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x450000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000AF800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 base 0000B0000000 mask FFFFF0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000450000000 aka 17664M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xaf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd9a0-0x000fd9af] mapped at [ffff8800000fd9a0]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x010ff000, 0x010fffff] PGTABLE
[ 0.000000] BRK [0x01100000, 0x01100fff] PGTABLE
[ 0.000000] BRK [0x01101000, 0x01101fff] PGTABLE
[ 0.000000] BRK [0x01102000, 0x01102fff] PGTABLE
[ 0.000000] BRK [0x01103000, 0x01103fff] PGTABLE
[ 0.000000] BRK [0x01104000, 0x01104fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3709c000-0x37845fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000AEE1F070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000AEE25880 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20160108/tbfadt-654)
[ 0.000000] ACPI: DSDT 0x00000000AEE1F170 00670F (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000AEE29F80 000040
[ 0.000000] ACPI: APIC 0x00000000AEE25978 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000AEE25A18 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000AEE25A60 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000AEE25AA0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: MATS 0x00000000AEE25AD8 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
[ 0.000000] ACPI: IVRS 0x00000000AEE25B10 000120 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: BGRT 0x00000000AEE25C30 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] cma: Reserved 64 MiB at 0x00000000aa400000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000044fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ae474fff]
[ 0.000000] node 0: [mem 0x00000000af155000-0x00000000af155fff]
[ 0.000000] node 0: [mem 0x00000000af35c000-0x00000000af7fffff]
[ 0.000000] node 0: [mem 0x0000000100001000-0x000000044fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000044fffffff]
[ 0.000000] On node 0 totalpages: 4188342
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 3605 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11109 pages used for memmap
[ 0.000000] DMA32 zone: 710938 pages, LIFO batch:31
[ 0.000000] Normal zone: 54272 pages used for memmap
[ 0.000000] Normal zone: 3473407 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae475000-0xaea32fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaea33000-0xaee2efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaee2f000-0xaf154fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf156000-0xaf35bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xaf800000-0xf7ffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88044fc00000 s91736 r8192 d31144 u262144
[ 0.000000] pcpu-alloc: s91736 r8192 d31144 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4119292
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.5.0-rc5 root=/dev/disk/by-id/ata-ST3160815AS_6RACD7A6-part5 splash=verbose showopts video=1600x1200 noresume apm=off vmalloc=256M cma=64M@0-4G amd_iommu_dump
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Memory: 16310552K/16753368K available (6373K kernel code, 854K rwdata, 3024K rodata, 996K init, 1180K bss, 377280K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU kthread priority: 1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1032 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 3616.493 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 7232.98 BogoMIPS (lpj=3616493)
[ 0.000028] pid_max: default: 32768 minimum: 301
[ 0.000038] ACPI: Core revision 20160108
[ 0.003684] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.003706] Security Framework initialized
[ 0.003735] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.003740] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.003998] CPU: Physical Processor ID: 0
[ 0.004001] CPU: Processor Core ID: 0
[ 0.004005] mce: CPU supports 7 MCE banks
[ 0.004013] LVT offset 1 assigned for vector 0xf9
[ 0.004019] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.004022] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.004232] Freeing SMP alternatives memory: 24K (ffffffff80fd0000 - ffffffff80fd6000)
[ 0.008062] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.119110] smpboot: CPU0: AMD FX(tm)-8150 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2)
[ 0.119130] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.119138] ... version: 0
[ 0.119141] ... bit width: 48
[ 0.119144] ... generic registers: 6
[ 0.119147] ... value mask: 0000ffffffffffff
[ 0.119150] ... max period: 00007fffffffffff
[ 0.119153] ... fixed-purpose events: 0
[ 0.119156] ... event mask: 000000000000003f
[ 0.128153] x86: Booting SMP configuration:
[ 0.128157] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.190938] x86: Booted up 1 node, 8 CPUs
[ 0.190946] smpboot: Total of 8 processors activated (57863.88 BogoMIPS)
[ 0.203277] devtmpfs: initialized
[ 0.203487] PM: Registering ACPI NVS region [mem 0xaea33000-0xaee2efff] (4177920 bytes)
[ 0.203538] PM: Registering ACPI NVS region [mem 0xaf156000-0xaf35bfff] (2121728 bytes)
[ 0.203640] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.203987] pinctrl core: initialized pinctrl subsystem
[ 0.204019] RTC time: 19:00:17, date: 02/26/16
[ 0.205149] NET: Registered protocol family 16
[ 0.207256] cpuidle: using governor ladder
[ 0.209255] cpuidle: using governor menu
[ 0.209323] ACPI: bus type PCI registered
[ 0.209327] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.209380] PCI: Using configuration type 1 for base access
[ 0.209383] PCI: Using configuration type 1 for extended access
[ 0.212341] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.212345] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.212570] ACPI: Added _OSI(Module Device)
[ 0.212574] ACPI: Added _OSI(Processor Device)
[ 0.212578] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.212581] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.213747] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.216444] ACPI: Interpreter enabled
[ 0.216462] ACPI: (supports S0 S3 S4 S5)
[ 0.216466] ACPI: Using IOAPIC for interrupt routing
[ 0.216631] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.223030] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.223037] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.223046] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.223417] PCI host bridge to bus 0000:00
[ 0.223422] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.223426] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.223430] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.223434] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.223438] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.223443] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.223449] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff window]
[ 0.223455] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.223465] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.223575] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.223679] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.223711] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.223766] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.223803] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.223833] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.223885] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.223936] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.223966] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.224020] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.224057] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[ 0.224086] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.224142] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.224179] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
[ 0.224209] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.224264] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.224301] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
[ 0.224331] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[ 0.224384] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.224426] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.224438] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
[ 0.224445] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
[ 0.224452] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
[ 0.224459] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
[ 0.224466] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
[ 0.224473] pci 0000:00:11.0: reg 0x24: [mem 0xd880b000-0xd880b3ff]
[ 0.224576] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.224586] pci 0000:00:12.0: reg 0x10: [mem 0xd880a000-0xd880afff]
[ 0.224676] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.224715] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.224728] pci 0000:00:12.2: reg 0x10: [mem 0xd8809000-0xd88090ff]
[ 0.224786] pci 0000:00:12.2: supports D1 D2
[ 0.224787] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.224838] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.224880] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.224889] pci 0000:00:13.0: reg 0x10: [mem 0xd8808000-0xd8808fff]
[ 0.224980] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.225020] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.225032] pci 0000:00:13.2: reg 0x10: [mem 0xd8807000-0xd88070ff]
[ 0.225090] pci 0000:00:13.2: supports D1 D2
[ 0.225092] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.225145] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.225185] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.225307] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.225317] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
[ 0.225324] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
[ 0.225330] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
[ 0.225337] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
[ 0.225344] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.225359] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.225363] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.225366] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.225370] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.225453] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.225468] pci 0000:00:14.2: reg 0x10: [mem 0xd8800000-0xd8803fff 64bit]
[ 0.225517] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.225568] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.225604] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.225727] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.225800] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.225835] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.225845] pci 0000:00:14.5: reg 0x10: [mem 0xd8806000-0xd8806fff]
[ 0.225934] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.225975] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.226026] pci 0000:00:15.0: supports D1 D2
[ 0.226079] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.226120] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.226171] pci 0000:00:15.1: supports D1 D2
[ 0.226226] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.226264] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[ 0.226315] pci 0000:00:15.2: supports D1 D2
[ 0.226368] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.226409] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.226419] pci 0000:00:16.0: reg 0x10: [mem 0xd8805000-0xd8805fff]
[ 0.226508] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.226548] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.226560] pci 0000:00:16.2: reg 0x10: [mem 0xd8804000-0xd88040ff]
[ 0.226618] pci 0000:00:16.2: supports D1 D2
[ 0.226620] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.226671] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.226711] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.226791] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.226868] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.226947] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.227028] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.227107] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.227226] pci 0000:01:00.0: [10de:0092] type 00 class 0x030000
[ 0.227235] pci 0000:01:00.0: reg 0x10: [mem 0xda000000-0xdaffffff]
[ 0.227243] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.227251] pci 0000:01:00.0: reg 0x1c: [mem 0xd9000000-0xd9ffffff 64bit]
[ 0.227257] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.227262] pci 0000:01:00.0: reg 0x30: [mem 0xdb000000-0xdb01ffff pref]
[ 0.227328] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.227338] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.227343] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.227345] pci 0000:00:02.0: bridge window [mem 0xd9000000-0xdb0fffff]
[ 0.227348] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.227389] pci 0000:02:00.0: [104c:8231] type 01 class 0x060400
[ 0.227476] pci 0000:02:00.0: supports D1 D2
[ 0.227520] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.227531] pci 0000:00:04.0: PCI bridge to [bus 02-05]
[ 0.227536] pci 0000:00:04.0: bridge window [io 0x6000-0x7fff]
[ 0.227538] pci 0000:00:04.0: bridge window [mem 0xdb800000-0xdd9fffff]
[ 0.227541] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.227601] pci 0000:03:04.0: [12d8:8150] type 01 class 0x060400
[ 0.227754] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[ 0.227762] pci 0000:02:00.0: bridge window [io 0x6000-0x7fff]
[ 0.227766] pci 0000:02:00.0: bridge window [mem 0xdb800000-0xdd9fffff]
[ 0.227772] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.227835] pci 0000:04:04.0: [10b5:0480] type 00 class 0x0e8000
[ 0.227866] pci 0000:04:04.0: reg 0x10: [mem 0xdd909000-0xdd9093ff]
[ 0.227882] pci 0000:04:04.0: reg 0x14: [mem 0xdd000000-0xdd7fffff]
[ 0.227897] pci 0000:04:04.0: reg 0x18: [mem 0xdd908000-0xdd90800f]
[ 0.228076] pci 0000:04:05.0: [10b5:0480] type 00 class 0x0e8000
[ 0.228108] pci 0000:04:05.0: reg 0x10: [mem 0xdd907000-0xdd9073ff]
[ 0.228123] pci 0000:04:05.0: reg 0x14: [mem 0xdc800000-0xdcffffff]
[ 0.228139] pci 0000:04:05.0: reg 0x18: [mem 0xdd906000-0xdd90600f]
[ 0.228315] pci 0000:04:06.0: [10b5:0480] type 00 class 0x0e8000
[ 0.228345] pci 0000:04:06.0: reg 0x10: [mem 0xdd905000-0xdd9053ff]
[ 0.228361] pci 0000:04:06.0: reg 0x14: [mem 0xdc000000-0xdc7fffff]
[ 0.228377] pci 0000:04:06.0: reg 0x18: [mem 0xdd904000-0xdd90400f]
[ 0.228554] pci 0000:04:07.0: [10b5:0480] type 00 class 0x0e8000
[ 0.228584] pci 0000:04:07.0: reg 0x10: [mem 0xdd903000-0xdd9033ff]
[ 0.228600] pci 0000:04:07.0: reg 0x14: [mem 0xdb800000-0xdbffffff]
[ 0.228616] pci 0000:04:07.0: reg 0x18: [mem 0xdd902000-0xdd90200f]
[ 0.228791] pci 0000:04:08.0: [3388:0022] type 01 class 0x060400
[ 0.228918] pci 0000:04:08.0: supports D1 D2
[ 0.228919] pci 0000:04:08.0: PME# supported from D0 D1 D2 D3hot
[ 0.228974] pci 0000:04:09.0: [10b5:9030] type 00 class 0x070002
[ 0.228996] pci 0000:04:09.0: reg 0x10: [mem 0xdd901000-0xdd90107f]
[ 0.229012] pci 0000:04:09.0: reg 0x14: [io 0x7180-0x71ff]
[ 0.229027] pci 0000:04:09.0: reg 0x18: [io 0x7100-0x717f]
[ 0.229141] pci 0000:04:0a.0: [1090:4360] type 00 class 0x058000
[ 0.229163] pci 0000:04:0a.0: reg 0x10: [mem 0xdd900000-0xdd9000ff]
[ 0.229178] pci 0000:04:0a.0: reg 0x14: [io 0x7000-0x70ff]
[ 0.229194] pci 0000:04:0a.0: reg 0x18: [mem 0xc0000000-0xc3ffffff pref]
[ 0.229252] pci 0000:04:0a.0: reg 0x30: [mem 0xdd90a000-0xdd90a7ff pref]
[ 0.229341] pci 0000:03:04.0: PCI bridge to [bus 04-05]
[ 0.229351] pci 0000:03:04.0: bridge window [io 0x6000-0x7fff]
[ 0.229355] pci 0000:03:04.0: bridge window [mem 0xdb800000-0xdd9fffff]
[ 0.229362] pci 0000:03:04.0: bridge window [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.229426] pci 0000:05:00.0: [1090:0100] type 00 class 0xff0000
[ 0.229452] pci 0000:05:00.0: reg 0x10: [mem 0xdd80a000-0xdd80afff]
[ 0.229470] pci 0000:05:00.0: reg 0x14: [mem 0xdd808000-0xdd809fff]
[ 0.229489] pci 0000:05:00.0: reg 0x18: [mem 0xdd800000-0xdd807fff]
[ 0.229680] pci 0000:04:08.0: PCI bridge to [bus 05]
[ 0.229692] pci 0000:04:08.0: bridge window [io 0x6000-0x6fff]
[ 0.229697] pci 0000:04:08.0: bridge window [mem 0xdd800000-0xdd8fffff]
[ 0.229766] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.229781] pci 0000:06:00.0: reg 0x10: [mem 0xde100000-0xde107fff 64bit]
[ 0.229850] pci 0000:06:00.0: supports D1 D2
[ 0.229851] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.231110] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.231117] pci 0000:00:09.0: bridge window [mem 0xde100000-0xde1fffff]
[ 0.231158] pci 0000:07:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.231168] pci 0000:07:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.231174] pci 0000:07:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.231180] pci 0000:07:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.231186] pci 0000:07:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.231192] pci 0000:07:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.231198] pci 0000:07:00.0: reg 0x24: [mem 0xde010000-0xde0101ff]
[ 0.231204] pci 0000:07:00.0: reg 0x30: [mem 0xde000000-0xde00ffff pref]
[ 0.231235] pci 0000:07:00.0: PME# supported from D3hot
[ 0.233107] pci 0000:00:0a.0: PCI bridge to [bus 07]
[ 0.233113] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.233115] pci 0000:00:0a.0: bridge window [mem 0xde000000-0xde0fffff]
[ 0.233163] pci 0000:08:00.0: [104c:8231] type 01 class 0x060400
[ 0.233255] pci 0000:08:00.0: supports D1 D2
[ 0.233301] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.233311] pci 0000:00:0b.0: PCI bridge to [bus 08-0d]
[ 0.233317] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
[ 0.233319] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xd87fffff]
[ 0.233321] pci 0000:00:0b.0: bridge window [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.233383] pci 0000:09:04.0: [12d8:8150] type 01 class 0x060400
[ 0.233540] pci 0000:08:00.0: PCI bridge to [bus 09-0d]
[ 0.233549] pci 0000:08:00.0: bridge window [io 0xc000-0xcfff]
[ 0.233553] pci 0000:08:00.0: bridge window [mem 0xd0000000-0xd87fffff]
[ 0.233559] pci 0000:08:00.0: bridge window [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.233619] pci 0000:0a:04.0: [10b7:9200] type 00 class 0x020000
[ 0.233645] pci 0000:0a:04.0: reg 0x10: [io 0xc200-0xc27f]
[ 0.233662] pci 0000:0a:04.0: reg 0x14: [mem 0xd8743000-0xd874307f]
[ 0.233735] pci 0000:0a:04.0: reg 0x30: [mem 0xd8700000-0xd871ffff pref]
[ 0.233783] pci 0000:0a:04.0: supports D1 D2
[ 0.233784] pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot
[ 0.233841] pci 0000:0a:05.0: [114a:5565] type 00 class 0x028000
[ 0.233869] pci 0000:0a:05.0: reg 0x10: [mem 0xd8742000-0xd87421ff]
[ 0.233885] pci 0000:0a:05.0: reg 0x14: [io 0xc100-0xc1ff]
[ 0.233901] pci 0000:0a:05.0: reg 0x18: [mem 0xd8741000-0xd874103f]
[ 0.233917] pci 0000:0a:05.0: reg 0x1c: [mem 0xd0000000-0xd7ffffff]
[ 0.234068] pci 0000:0a:06.0: [3388:0022] type 01 class 0x060400
[ 0.234198] pci 0000:0a:06.0: supports D1 D2
[ 0.234200] pci 0000:0a:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.234262] pci 0000:0a:07.0: [3388:0022] type 01 class 0x060400
[ 0.234391] pci 0000:0a:07.0: supports D1 D2
[ 0.234392] pci 0000:0a:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.234454] pci 0000:0a:08.0: [3388:0022] type 01 class 0x060400
[ 0.234583] pci 0000:0a:08.0: supports D1 D2
[ 0.234585] pci 0000:0a:08.0: PME# supported from D0 D1 D2 D3hot
[ 0.234639] pci 0000:0a:09.0: [114f:0027] type 00 class 0x078000
[ 0.234661] pci 0000:0a:09.0: reg 0x10: [mem 0xd8000000-0xd83fffff]
[ 0.234749] pci 0000:0a:09.0: reg 0x30: [mem 0xd8730000-0xd873ffff pref]
[ 0.234809] pci 0000:0a:0a.0: [9004:3860] type 00 class 0x010000
[ 0.234836] pci 0000:0a:0a.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.234852] pci 0000:0a:0a.0: reg 0x14: [mem 0xd8740000-0xd8740fff]
[ 0.234926] pci 0000:0a:0a.0: reg 0x30: [mem 0xd8720000-0xd872ffff pref]
[ 0.235048] pci 0000:09:04.0: PCI bridge to [bus 0a-0d]
[ 0.235058] pci 0000:09:04.0: bridge window [io 0xc000-0xcfff]
[ 0.235062] pci 0000:09:04.0: bridge window [mem 0xd0000000-0xd87fffff]
[ 0.235069] pci 0000:09:04.0: bridge window [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.235139] pci 0000:0b:00.0: [1090:4710] type 00 class 0xff0000
[ 0.235170] pci 0000:0b:00.0: reg 0x10: [mem 0xd8600000-0xd86001ff]
[ 0.235188] pci 0000:0b:00.0: reg 0x14: [mem 0xc6000000-0xc6ffffff pref]
[ 0.235432] pci 0000:0a:06.0: PCI bridge to [bus 0b]
[ 0.235448] pci 0000:0a:06.0: bridge window [mem 0xd8600000-0xd86fffff]
[ 0.235458] pci 0000:0a:06.0: bridge window [mem 0xc6000000-0xc6ffffff 64bit pref]
[ 0.235529] pci 0000:0c:00.0: [1090:4710] type 00 class 0xff0000
[ 0.235560] pci 0000:0c:00.0: reg 0x10: [mem 0xd8500000-0xd85001ff]
[ 0.235578] pci 0000:0c:00.0: reg 0x14: [mem 0xc5000000-0xc5ffffff pref]
[ 0.235824] pci 0000:0a:07.0: PCI bridge to [bus 0c]
[ 0.235840] pci 0000:0a:07.0: bridge window [mem 0xd8500000-0xd85fffff]
[ 0.235850] pci 0000:0a:07.0: bridge window [mem 0xc5000000-0xc5ffffff 64bit pref]
[ 0.235920] pci 0000:0d:00.0: [1090:4710] type 00 class 0xff0000
[ 0.235954] pci 0000:0d:00.0: reg 0x10: [mem 0xd8400000-0xd84001ff]
[ 0.235974] pci 0000:0d:00.0: reg 0x14: [mem 0xc4000000-0xc4ffffff pref]
[ 0.236221] pci 0000:0a:08.0: PCI bridge to [bus 0d]
[ 0.236237] pci 0000:0a:08.0: bridge window [mem 0xd8400000-0xd84fffff]
[ 0.236246] pci 0000:0a:08.0: bridge window [mem 0xc4000000-0xc4ffffff 64bit pref]
[ 0.236331] pci 0000:0e:00.0: [10b5:8114] type 01 class 0x060400
[ 0.236350] pci 0000:0e:00.0: reg 0x10: [mem 0xddc00000-0xddc01fff]
[ 0.236451] pci 0000:0e:00.0: PME# supported from D0 D3hot
[ 0.236521] pci 0000:0e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.236533] pci 0000:00:0d.0: PCI bridge to [bus 0e-0f]
[ 0.236538] pci 0000:00:0d.0: bridge window [io 0xb000-0xbfff]
[ 0.236540] pci 0000:00:0d.0: bridge window [mem 0xddb00000-0xddcfffff]
[ 0.236606] pci 0000:0f:04.0: [9005:8017] type 00 class 0x010000
[ 0.236629] pci 0000:0f:04.0: reg 0x10: [io 0xb100-0xb1ff]
[ 0.236646] pci 0000:0f:04.0: reg 0x14: [mem 0xddb80000-0xddb81fff 64bit]
[ 0.236657] pci 0000:0f:04.0: reg 0x1c: [io 0xb000-0xb0ff]
[ 0.236688] pci 0000:0f:04.0: reg 0x30: [mem 0xddb00000-0xddb7ffff pref]
[ 0.236808] pci 0000:0e:00.0: PCI bridge to [bus 0f]
[ 0.236817] pci 0000:0e:00.0: bridge window [io 0xb000-0xbfff]
[ 0.236821] pci 0000:0e:00.0: bridge window [mem 0xddb00000-0xddbfffff]
[ 0.236870] pci 0000:10:06.0: [1090:4610] type 00 class 0xff0000
[ 0.236883] pci 0000:10:06.0: reg 0x10: [io 0xa000-0xa03f]
[ 0.236892] pci 0000:10:06.0: reg 0x14: [mem 0xddf00000-0xddf00fff]
[ 0.237002] pci 0000:00:14.4: PCI bridge to [bus 10] (subtractive decode)
[ 0.237008] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.237011] pci 0000:00:14.4: bridge window [mem 0xddf00000-0xddffffff]
[ 0.237014] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.237015] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.237017] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.237018] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.237019] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.237021] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.237022] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff window] (subtractive decode)
[ 0.237085] pci 0000:11:00.0: [10ec:8168] type 00 class 0x020000
[ 0.237104] pci 0000:11:00.0: reg 0x10: [io 0x9000-0x90ff]
[ 0.237128] pci 0000:11:00.0: reg 0x18: [mem 0xc7004000-0xc7004fff 64bit pref]
[ 0.237143] pci 0000:11:00.0: reg 0x20: [mem 0xc7000000-0xc7003fff 64bit pref]
[ 0.237224] pci 0000:11:00.0: supports D1 D2
[ 0.237225] pci 0000:11:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.237267] pci 0000:11:00.0: System wakeup disabled by ACPI
[ 0.239111] pci 0000:00:15.0: PCI bridge to [bus 11]
[ 0.239119] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff]
[ 0.239124] pci 0000:00:15.0: bridge window [mem 0xc7000000-0xc70fffff 64bit pref]
[ 0.239179] pci 0000:12:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.239201] pci 0000:12:00.0: reg 0x10: [mem 0xdde00000-0xdde07fff 64bit]
[ 0.239298] pci 0000:12:00.0: supports D1 D2
[ 0.239299] pci 0000:12:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.241110] pci 0000:00:15.1: PCI bridge to [bus 12]
[ 0.241119] pci 0000:00:15.1: bridge window [mem 0xdde00000-0xddefffff]
[ 0.241173] pci 0000:13:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.241187] pci 0000:13:00.0: reg 0x10: [io 0x8040-0x8047]
[ 0.241196] pci 0000:13:00.0: reg 0x14: [io 0x8030-0x8033]
[ 0.241204] pci 0000:13:00.0: reg 0x18: [io 0x8020-0x8027]
[ 0.241213] pci 0000:13:00.0: reg 0x1c: [io 0x8010-0x8013]
[ 0.241221] pci 0000:13:00.0: reg 0x20: [io 0x8000-0x800f]
[ 0.241229] pci 0000:13:00.0: reg 0x24: [mem 0xddd10000-0xddd101ff]
[ 0.241238] pci 0000:13:00.0: reg 0x30: [mem 0xddd00000-0xddd0ffff pref]
[ 0.241282] pci 0000:13:00.0: PME# supported from D3hot
[ 0.243108] pci 0000:00:15.2: PCI bridge to [bus 13]
[ 0.243115] pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
[ 0.243118] pci 0000:00:15.2: bridge window [mem 0xddd00000-0xdddfffff]
[ 0.243154] pci_bus 0000:00: on NUMA node 0
[ 0.243640] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.243719] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.243801] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.243881] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.243948] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[ 0.244002] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[ 0.244054] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[ 0.244109] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[ 0.244279] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.244283] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.244293] vgaarb: loaded
[ 0.244297] vgaarb: bridge control possible 0000:01:00.0
[ 0.244373] SCSI subsystem initialized
[ 0.244414] libata version 3.00 loaded.
[ 0.244418] ACPI: bus type USB registered
[ 0.244435] usbcore: registered new interface driver usbfs
[ 0.244447] usbcore: registered new interface driver hub
[ 0.244473] usbcore: registered new device driver usb
[ 0.244580] PCI: Using ACPI for IRQ routing
[ 0.244585] PCI: pci_cache_line_size set to 64 bytes
[ 0.244746] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.244748] e820: reserve RAM buffer [mem 0xae475000-0xafffffff]
[ 0.244749] e820: reserve RAM buffer [mem 0xaf156000-0xafffffff]
[ 0.244750] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
[ 0.244844] NetLabel: Initializing
[ 0.244847] NetLabel: domain hash size = 128
[ 0.244850] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.244861] NetLabel: unlabeled traffic allowed by default
[ 0.244892] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.244897] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.246973] clocksource: Switched to clocksource hpet
[ 0.250078] VFS: Disk quotas dquot_6.6.0
[ 0.250093] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.250180] pnp: PnP ACPI init
[ 0.250295] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.250301] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.250662] system 00:01: [io 0x040b] has been reserved
[ 0.250667] system 00:01: [io 0x04d6] has been reserved
[ 0.250671] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.250675] system 00:01: [io 0x0c14] has been reserved
[ 0.250679] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.250683] system 00:01: [io 0x0c52] has been reserved
[ 0.250688] system 00:01: [io 0x0c6c] has been reserved
[ 0.250692] system 00:01: [io 0x0c6f] has been reserved
[ 0.250696] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.250700] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.250704] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.250708] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.250712] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.250716] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.250720] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.250724] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.250728] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.250733] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.250737] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.250742] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.250746] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.250750] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.250755] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.250759] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.250763] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.250768] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250968] system 00:02: [io 0x0220-0x0227] has been reserved
[ 0.250973] system 00:02: [io 0x0228-0x0237] has been reserved
[ 0.250977] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 0.250982] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251028] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.251298] pnp 00:04: [dma 0 disabled]
[ 0.251337] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.251363] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.251453] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.251458] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251521] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251693] system 00:08: [mem 0xfeb20000-0xfeb23fff] has been reserved
[ 0.251699] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251848] system 00:09: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.251853] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251974] pnp: PnP ACPI: found 10 devices
[ 0.258598] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.258731] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.258736] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.258741] pci 0000:00:02.0: bridge window [mem 0xd9000000-0xdb0fffff]
[ 0.258746] pci 0000:00:02.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.258755] pci 0000:04:08.0: PCI bridge to [bus 05]
[ 0.258760] pci 0000:04:08.0: bridge window [io 0x6000-0x6fff]
[ 0.258771] pci 0000:04:08.0: bridge window [mem 0xdd800000-0xdd8fffff]
[ 0.258787] pci 0000:03:04.0: PCI bridge to [bus 04-05]
[ 0.258793] pci 0000:03:04.0: bridge window [io 0x6000-0x7fff]
[ 0.258801] pci 0000:03:04.0: bridge window [mem 0xdb800000-0xdd9fffff]
[ 0.258808] pci 0000:03:04.0: bridge window [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.258820] pci 0000:02:00.0: PCI bridge to [bus 03-05]
[ 0.258824] pci 0000:02:00.0: bridge window [io 0x6000-0x7fff]
[ 0.258832] pci 0000:02:00.0: bridge window [mem 0xdb800000-0xdd9fffff]
[ 0.258838] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.258848] pci 0000:00:04.0: PCI bridge to [bus 02-05]
[ 0.258852] pci 0000:00:04.0: bridge window [io 0x6000-0x7fff]
[ 0.258857] pci 0000:00:04.0: bridge window [mem 0xdb800000-0xdd9fffff]
[ 0.258862] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.258869] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.258873] pci 0000:00:09.0: bridge window [mem 0xde100000-0xde1fffff]
[ 0.258879] pci 0000:00:0a.0: PCI bridge to [bus 07]
[ 0.258883] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.258888] pci 0000:00:0a.0: bridge window [mem 0xde000000-0xde0fffff]
[ 0.258895] pci 0000:0a:06.0: PCI bridge to [bus 0b]
[ 0.258905] pci 0000:0a:06.0: bridge window [mem 0xd8600000-0xd86fffff]
[ 0.258913] pci 0000:0a:06.0: bridge window [mem 0xc6000000-0xc6ffffff 64bit pref]
[ 0.258928] pci 0000:0a:07.0: PCI bridge to [bus 0c]
[ 0.258938] pci 0000:0a:07.0: bridge window [mem 0xd8500000-0xd85fffff]
[ 0.258946] pci 0000:0a:07.0: bridge window [mem 0xc5000000-0xc5ffffff 64bit pref]
[ 0.258965] pci 0000:0a:08.0: PCI bridge to [bus 0d]
[ 0.258975] pci 0000:0a:08.0: bridge window [mem 0xd8400000-0xd84fffff]
[ 0.258983] pci 0000:0a:08.0: bridge window [mem 0xc4000000-0xc4ffffff 64bit pref]
[ 0.258997] pci 0000:09:04.0: PCI bridge to [bus 0a-0d]
[ 0.259003] pci 0000:09:04.0: bridge window [io 0xc000-0xcfff]
[ 0.259011] pci 0000:09:04.0: bridge window [mem 0xd0000000-0xd87fffff]
[ 0.259018] pci 0000:09:04.0: bridge window [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.259030] pci 0000:08:00.0: PCI bridge to [bus 09-0d]
[ 0.259034] pci 0000:08:00.0: bridge window [io 0xc000-0xcfff]
[ 0.259042] pci 0000:08:00.0: bridge window [mem 0xd0000000-0xd87fffff]
[ 0.259048] pci 0000:08:00.0: bridge window [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.259058] pci 0000:00:0b.0: PCI bridge to [bus 08-0d]
[ 0.259062] pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
[ 0.259067] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xd87fffff]
[ 0.259071] pci 0000:00:0b.0: bridge window [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.259079] pci 0000:0e:00.0: PCI bridge to [bus 0f]
[ 0.259084] pci 0000:0e:00.0: bridge window [io 0xb000-0xbfff]
[ 0.259093] pci 0000:0e:00.0: bridge window [mem 0xddb00000-0xddbfffff]
[ 0.259107] pci 0000:00:0d.0: PCI bridge to [bus 0e-0f]
[ 0.259111] pci 0000:00:0d.0: bridge window [io 0xb000-0xbfff]
[ 0.259116] pci 0000:00:0d.0: bridge window [mem 0xddb00000-0xddcfffff]
[ 0.259122] pci 0000:00:14.4: PCI bridge to [bus 10]
[ 0.259127] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.259133] pci 0000:00:14.4: bridge window [mem 0xddf00000-0xddffffff]
[ 0.259141] pci 0000:00:15.0: PCI bridge to [bus 11]
[ 0.259145] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff]
[ 0.259152] pci 0000:00:15.0: bridge window [mem 0xc7000000-0xc70fffff 64bit pref]
[ 0.259161] pci 0000:00:15.1: PCI bridge to [bus 12]
[ 0.259166] pci 0000:00:15.1: bridge window [mem 0xdde00000-0xddefffff]
[ 0.259174] pci 0000:00:15.2: PCI bridge to [bus 13]
[ 0.259178] pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
[ 0.259184] pci 0000:00:15.2: bridge window [mem 0xddd00000-0xdddfffff]
[ 0.259192] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.259193] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.259195] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.259196] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.259197] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.259199] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.259200] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xdfffffff window]
[ 0.259201] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.259203] pci_bus 0000:01: resource 1 [mem 0xd9000000-0xdb0fffff]
[ 0.259204] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.259206] pci_bus 0000:02: resource 0 [io 0x6000-0x7fff]
[ 0.259207] pci_bus 0000:02: resource 1 [mem 0xdb800000-0xdd9fffff]
[ 0.259208] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.259210] pci_bus 0000:03: resource 0 [io 0x6000-0x7fff]
[ 0.259211] pci_bus 0000:03: resource 1 [mem 0xdb800000-0xdd9fffff]
[ 0.259212] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.259213] pci_bus 0000:04: resource 0 [io 0x6000-0x7fff]
[ 0.259215] pci_bus 0000:04: resource 1 [mem 0xdb800000-0xdd9fffff]
[ 0.259216] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc3ffffff 64bit pref]
[ 0.259217] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff]
[ 0.259219] pci_bus 0000:05: resource 1 [mem 0xdd800000-0xdd8fffff]
[ 0.259220] pci_bus 0000:06: resource 1 [mem 0xde100000-0xde1fffff]
[ 0.259222] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
[ 0.259223] pci_bus 0000:07: resource 1 [mem 0xde000000-0xde0fffff]
[ 0.259224] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.259226] pci_bus 0000:08: resource 1 [mem 0xd0000000-0xd87fffff]
[ 0.259227] pci_bus 0000:08: resource 2 [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.259228] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
[ 0.259229] pci_bus 0000:09: resource 1 [mem 0xd0000000-0xd87fffff]
[ 0.259231] pci_bus 0000:09: resource 2 [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.259232] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff]
[ 0.259233] pci_bus 0000:0a: resource 1 [mem 0xd0000000-0xd87fffff]
[ 0.259235] pci_bus 0000:0a: resource 2 [mem 0xc4000000-0xc6ffffff 64bit pref]
[ 0.259236] pci_bus 0000:0b: resource 1 [mem 0xd8600000-0xd86fffff]
[ 0.259238] pci_bus 0000:0b: resource 2 [mem 0xc6000000-0xc6ffffff 64bit pref]
[ 0.259239] pci_bus 0000:0c: resource 1 [mem 0xd8500000-0xd85fffff]
[ 0.259240] pci_bus 0000:0c: resource 2 [mem 0xc5000000-0xc5ffffff 64bit pref]
[ 0.259242] pci_bus 0000:0d: resource 1 [mem 0xd8400000-0xd84fffff]
[ 0.259243] pci_bus 0000:0d: resource 2 [mem 0xc4000000-0xc4ffffff 64bit pref]
[ 0.259244] pci_bus 0000:0e: resource 0 [io 0xb000-0xbfff]
[ 0.259246] pci_bus 0000:0e: resource 1 [mem 0xddb00000-0xddcfffff]
[ 0.259247] pci_bus 0000:0f: resource 0 [io 0xb000-0xbfff]
[ 0.259248] pci_bus 0000:0f: resource 1 [mem 0xddb00000-0xddbfffff]
[ 0.259250] pci_bus 0000:10: resource 0 [io 0xa000-0xafff]
[ 0.259251] pci_bus 0000:10: resource 1 [mem 0xddf00000-0xddffffff]
[ 0.259252] pci_bus 0000:10: resource 4 [io 0x0000-0x03af window]
[ 0.259253] pci_bus 0000:10: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.259255] pci_bus 0000:10: resource 6 [io 0x03b0-0x03df window]
[ 0.259256] pci_bus 0000:10: resource 7 [io 0x0d00-0xffff window]
[ 0.259257] pci_bus 0000:10: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.259259] pci_bus 0000:10: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.259260] pci_bus 0000:10: resource 10 [mem 0xb0000000-0xdfffffff window]
[ 0.259261] pci_bus 0000:11: resource 0 [io 0x9000-0x9fff]
[ 0.259263] pci_bus 0000:11: resource 2 [mem 0xc7000000-0xc70fffff 64bit pref]
[ 0.259264] pci_bus 0000:12: resource 1 [mem 0xdde00000-0xddefffff]
[ 0.259265] pci_bus 0000:13: resource 0 [io 0x8000-0x8fff]
[ 0.259267] pci_bus 0000:13: resource 1 [mem 0xddd00000-0xdddfffff]
[ 0.259287] NET: Registered protocol family 2
[ 0.259434] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.259678] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.259867] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.259898] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.259953] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.260053] NET: Registered protocol family 1
[ 0.556016] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.556019] pci 0000:02:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
[ 0.556075] pci 0000:08:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
[ 0.556151] PCI: CLS 64 bytes, default 64
[ 0.556198] Unpacking initramfs...
[ 1.215070] microcode: microcode: updated early to new patch_level=0x0600063d
[ 1.216708] Freeing initrd memory: 7848K (ffff88003709c000 - ffff880037846000)
[ 1.216791] AMD-Vi: device: 00:00.2 cap: 0040 seg: 0 flags: 3e info 1300
[ 1.216795] AMD-Vi: mmio-addr: 00000000feb20000
[ 1.216816] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:00.0 flags: 00
[ 1.216820] AMD-Vi: DEV_RANGE_END devid: 00:00.2
[ 1.216824] AMD-Vi: DEV_SELECT devid: 00:02.0 flags: 00
[ 1.216827] AMD-Vi: DEV_SELECT devid: 01:00.0 flags: 00
[ 1.216831] AMD-Vi: DEV_SELECT devid: 00:04.0 flags: 00
[ 1.216834] AMD-Vi: DEV_SELECT devid: 02:00.0 flags: 00
[ 1.216838] AMD-Vi: DEV_ALIAS_RANGE devid: 03:01.0 flags: 00 devid_to: 03:00.0
[ 1.216843] AMD-Vi: DEV_RANGE_END devid: 05:1f.7
[ 1.216857] AMD-Vi: DEV_SELECT devid: 00:09.0 flags: 00
[ 1.216860] AMD-Vi: DEV_SELECT devid: 06:00.0 flags: 00
[ 1.216864] AMD-Vi: DEV_SELECT devid: 00:0a.0 flags: 00
[ 1.216867] AMD-Vi: DEV_SELECT devid: 07:00.0 flags: 00
[ 1.216870] AMD-Vi: DEV_SELECT devid: 00:0b.0 flags: 00
[ 1.216873] AMD-Vi: DEV_SELECT devid: 08:00.0 flags: 00
[ 1.216877] AMD-Vi: DEV_ALIAS_RANGE devid: 09:01.0 flags: 00 devid_to: 09:00.0
[ 1.216882] AMD-Vi: DEV_RANGE_END devid: 0d:1f.7
[ 1.216904] AMD-Vi: DEV_SELECT devid: 00:0d.0 flags: 00
[ 1.216907] AMD-Vi: DEV_SELECT devid: 0e:00.0 flags: 00
[ 1.216911] AMD-Vi: DEV_ALIAS_RANGE devid: 0f:01.0 flags: 00 devid_to: 0f:00.0
[ 1.216916] AMD-Vi: DEV_RANGE_END devid: 0f:1f.7
[ 1.216922] AMD-Vi: DEV_SELECT devid: 00:11.0 flags: 00
[ 1.216926] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:12.0 flags: 00
[ 1.216929] AMD-Vi: DEV_RANGE_END devid: 00:12.2
[ 1.216933] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:13.0 flags: 00
[ 1.216936] AMD-Vi: DEV_RANGE_END devid: 00:13.2
[ 1.216939] AMD-Vi: DEV_SELECT devid: 00:14.0 flags: d7
[ 1.216942] AMD-Vi: DEV_SELECT devid: 00:14.1 flags: 00
[ 1.216946] AMD-Vi: DEV_SELECT devid: 00:14.2 flags: 00
[ 1.216949] AMD-Vi: DEV_SELECT devid: 00:14.3 flags: 00
[ 1.216952] AMD-Vi: DEV_SELECT devid: 00:14.4 flags: 00
[ 1.216956] AMD-Vi: DEV_ALIAS_RANGE devid: 10:00.0 flags: 00 devid_to: 00:14.4
[ 1.216961] AMD-Vi: DEV_RANGE_END devid: 10:1f.7
[ 1.216968] AMD-Vi: DEV_SELECT devid: 00:14.5 flags: 00
[ 1.216986] AMD-Vi: DEV_SELECT devid: 00:15.0 flags: 00
[ 1.216990] AMD-Vi: DEV_SELECT devid: 11:00.0 flags: 00
[ 1.216993] AMD-Vi: DEV_SELECT devid: 00:15.1 flags: 00
[ 1.216996] AMD-Vi: DEV_SELECT devid: 12:00.0 flags: 00
[ 1.217000] AMD-Vi: DEV_SELECT devid: 00:15.2 flags: 00
[ 1.217003] AMD-Vi: DEV_SELECT devid: 13:00.0 flags: 00
[ 1.217006] AMD-Vi: DEV_SELECT_RANGE_START devid: 00:16.0 flags: 00
[ 1.217010] AMD-Vi: DEV_RANGE_END devid: 00:16.2
[ 1.217013] AMD-Vi: DEV_SPECIAL(IOAPIC[9]) devid: 00:14.0
[ 1.217017] AMD-Vi: DEV_SPECIAL(HPET[0]) devid: 00:14.0
[ 1.217021] AMD-Vi: DEV_SPECIAL(IOAPIC[10]) devid: 00:00.1
[ 1.362037] iommu: Adding device 0000:00:00.0 to group 0
[ 1.362415] iommu: Adding device 0000:00:02.0 to group 1
[ 1.362796] iommu: Adding device 0000:00:04.0 to group 2
[ 1.363179] iommu: Adding device 0000:00:09.0 to group 3
[ 1.363561] iommu: Adding device 0000:00:0a.0 to group 4
[ 1.363938] iommu: Adding device 0000:00:0b.0 to group 5
[ 1.364321] iommu: Adding device 0000:00:0d.0 to group 6
[ 1.364696] iommu: Adding device 0000:00:11.0 to group 7
[ 1.365101] iommu: Adding device 0000:00:12.0 to group 8
[ 1.365123] iommu: Adding device 0000:00:12.2 to group 8
[ 1.365518] iommu: Adding device 0000:00:13.0 to group 9
[ 1.365542] iommu: Adding device 0000:00:13.2 to group 9
[ 1.365921] iommu: Adding device 0000:00:14.0 to group 10
[ 1.366303] iommu: Adding device 0000:00:14.1 to group 11
[ 1.366684] iommu: Adding device 0000:00:14.2 to group 12
[ 1.367065] iommu: Adding device 0000:00:14.3 to group 13
[ 1.367445] iommu: Adding device 0000:00:14.4 to group 14
[ 1.367822] iommu: Adding device 0000:00:14.5 to group 15
[ 1.368239] iommu: Adding device 0000:00:15.0 to group 16
[ 1.368265] iommu: Adding device 0000:00:15.1 to group 16
[ 1.368293] iommu: Adding device 0000:00:15.2 to group 16
[ 1.368690] iommu: Adding device 0000:00:16.0 to group 17
[ 1.368715] iommu: Adding device 0000:00:16.2 to group 17
[ 1.369103] iommu: Adding device 0000:01:00.0 to group 18
[ 1.369483] iommu: Adding device 0000:02:00.0 to group 19
[ 1.369494] iommu: Adding device 0000:03:04.0 to group 19
[ 1.369505] iommu: Adding device 0000:04:04.0 to group 19
[ 1.369516] iommu: Adding device 0000:04:05.0 to group 19
[ 1.369527] iommu: Adding device 0000:04:06.0 to group 19
[ 1.369539] iommu: Adding device 0000:04:07.0 to group 19
[ 1.369549] iommu: Adding device 0000:04:08.0 to group 19
[ 1.369560] iommu: Adding device 0000:04:09.0 to group 19
[ 1.369570] iommu: Adding device 0000:04:0a.0 to group 19
[ 1.369581] iommu: Adding device 0000:05:00.0 to group 19
[ 1.369965] iommu: Adding device 0000:06:00.0 to group 20
[ 1.370350] iommu: Adding device 0000:07:00.0 to group 21
[ 1.370733] iommu: Adding device 0000:08:00.0 to group 22
[ 1.370744] iommu: Adding device 0000:09:04.0 to group 22
[ 1.370755] iommu: Adding device 0000:0a:04.0 to group 22
[ 1.370765] iommu: Adding device 0000:0a:05.0 to group 22
[ 1.370776] iommu: Adding device 0000:0a:06.0 to group 22
[ 1.370787] iommu: Adding device 0000:0a:07.0 to group 22
[ 1.370797] iommu: Adding device 0000:0a:08.0 to group 22
[ 1.370809] iommu: Adding device 0000:0a:09.0 to group 22
[ 1.370820] iommu: Adding device 0000:0a:0a.0 to group 22
[ 1.370830] iommu: Adding device 0000:0b:00.0 to group 22
[ 1.370841] iommu: Adding device 0000:0c:00.0 to group 22
[ 1.370852] iommu: Adding device 0000:0d:00.0 to group 22
[ 1.371242] iommu: Adding device 0000:0e:00.0 to group 23
[ 1.371253] iommu: Adding device 0000:0f:04.0 to group 23
[ 1.371264] iommu: Adding device 0000:10:06.0 to group 14
[ 1.371280] iommu: Adding device 0000:11:00.0 to group 16
[ 1.371294] iommu: Adding device 0000:12:00.0 to group 16
[ 1.371306] iommu: Adding device 0000:13:00.0 to group 16
[ 1.371310] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 1.371390] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.373394] perf: AMD NB counters detected
[ 1.373454] LVT offset 0 assigned for vector 0x400
[ 1.373473] perf: AMD IBS detected (0x000000ff)
[ 1.374058] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.374096] audit: initializing netlink subsys (disabled)
[ 1.374112] audit: type=2000 audit(1456513218.252:1): initialized
[ 1.374292] Initialise system trusted keyring
[ 1.375971] zbud: loaded
[ 1.376790] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.376797] io scheduler noop registered
[ 1.376802] io scheduler deadline registered
[ 1.376830] io scheduler cfq registered (default)
[ 1.377621] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.377630] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.377656] vesafb: mode is 1280x1024x16, linelength=2560, pages=0
[ 1.377660] vesafb: scrolling: redraw
[ 1.377663] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.377671] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override.
[ 1.377684] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90000400000, using 2560k, total 2560k
[ 1.393195] Console: switching to colour frame buffer device 160x64
[ 1.408658] fb0: VESA VGA frame buffer device
[ 1.408768] GHES: HEST is not enabled!
[ 1.408873] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.429485] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.430304] Non-volatile memory driver v1.3
[ 1.430408] Linux agpgart interface v0.103
[ 1.433408] ahci 0000:00:11.0: version 3.0
[ 1.433491] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.433633] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.434284] scsi host0: ahci
[ 1.434416] scsi host1: ahci
[ 1.434543] scsi host2: ahci
[ 1.434679] scsi host3: ahci
[ 1.434766] ata1: SATA max UDMA/133 abar m1024@0xd880b000 port 0xd880b100 irq 19
[ 1.434895] ata2: SATA max UDMA/133 abar m1024@0xd880b000 port 0xd880b180 irq 19
[ 1.435029] ata3: SATA max UDMA/133 abar m1024@0xd880b000 port 0xd880b200 irq 19
[ 1.435158] ata4: SATA max UDMA/133 abar m1024@0xd880b000 port 0xd880b280 irq 19
[ 1.435469] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.435610] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.437069] scsi host4: ahci
[ 1.437231] scsi host5: ahci
[ 1.437319] ata5: SATA max UDMA/133 abar m512@0xde010000 port 0xde010100 irq 29
[ 1.437447] ata6: SATA max UDMA/133 abar m512@0xde010000 port 0xde010180 irq 29
[ 1.437729] ahci 0000:13:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.437870] ahci 0000:13:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.438303] scsi host6: ahci
[ 1.438438] scsi host7: ahci
[ 1.438524] ata7: SATA max UDMA/133 abar m512@0xddd10000 port 0xddd10100 irq 28
[ 1.438653] ata8: SATA max UDMA/133 abar m512@0xddd10000 port 0xddd10180 irq 28
[ 1.438793] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.438909] ehci-pci: EHCI PCI platform driver
[ 1.439076] QUIRK: Enable AMD PLL fix
[ 1.439096] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.439190] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.439320] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.439477] ehci-pci 0000:00:12.2: debug port 1
[ 1.439580] ehci-pci 0000:00:12.2: irq 17, io mem 0xd8809000
[ 1.444991] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.445139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.445256] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.445381] usb usb1: Product: EHCI Host Controller
[ 1.449823] usb usb1: Manufacturer: Linux 4.5.0-rc5 ehci_hcd
[ 1.454286] usb usb1: SerialNumber: 0000:00:12.2
[ 1.458840] hub 1-0:1.0: USB hub found
[ 1.463281] hub 1-0:1.0: 5 ports detected
[ 1.467882] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.472301] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.476742] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.481230] ehci-pci 0000:00:13.2: debug port 1
[ 1.485668] ehci-pci 0000:00:13.2: irq 17, io mem 0xd8807000
[ 1.495995] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.500402] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.504800] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.509215] usb usb2: Product: EHCI Host Controller
[ 1.513643] usb usb2: Manufacturer: Linux 4.5.0-rc5 ehci_hcd
[ 1.518110] usb usb2: SerialNumber: 0000:00:13.2
[ 1.522638] hub 2-0:1.0: USB hub found
[ 1.527039] hub 2-0:1.0: 5 ports detected
[ 1.531572] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.535933] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.540340] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.544775] ehci-pci 0000:00:16.2: debug port 1
[ 1.549132] ehci-pci 0000:00:16.2: irq 17, io mem 0xd8804000
[ 1.558995] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.563239] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.567501] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.571727] usb usb3: Product: EHCI Host Controller
[ 1.575952] usb usb3: Manufacturer: Linux 4.5.0-rc5 ehci_hcd
[ 1.580174] usb usb3: SerialNumber: 0000:00:16.2
[ 1.584429] hub 3-0:1.0: USB hub found
[ 1.588547] hub 3-0:1.0: 4 ports detected
[ 1.592754] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.596873] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.601024] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.605136] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.609538] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.613962] mousedev: PS/2 mouse device common for all mice
[ 1.619477] rtc_cmos 00:05: RTC can wake from S4
[ 1.623956] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.628413] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.633100] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.637720] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.642392] usbcore: registered new interface driver usbhid
[ 1.646963] usbhid: USB HID core driver
[ 1.651500] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.656416] NET: Registered protocol family 10
[ 1.661268] Key type dns_resolver registered
[ 1.666324] microcode: CPU0: patch_level=0x0600063d
[ 1.671005] microcode: CPU1: patch_level=0x0600063d
[ 1.675612] microcode: CPU2: patch_level=0x0600063d
[ 1.680129] microcode: CPU3: patch_level=0x0600063d
[ 1.684664] microcode: CPU4: patch_level=0x0600063d
[ 1.689101] microcode: CPU5: patch_level=0x0600063d
[ 1.693540] microcode: CPU6: patch_level=0x0600063d
[ 1.697886] microcode: CPU7: patch_level=0x0600063d
[ 1.702190] microcode: Microcode Update Driver: v2.01 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba
[ 1.706736] registered taskstats version 1
[ 1.711115] Loading compiled-in X.509 certificates
[ 1.715493] zswap: loaded using pool lzo/zbud
[ 1.720481] Magic number: 4:905:41
[ 1.724880] rtc_cmos 00:05: setting system clock to 2016-02-26 19:00:19 UTC (1456513219)
[ 1.742735] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.747195] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.891003] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.895394] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.896020] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.897569] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 1.908338] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.912744] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.962276] ata2.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
[ 1.966602] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.970941] ata3.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
[ 1.975253] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.979629] ata4.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
[ 1.984024] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.988427] ata1.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133
[ 1.992824] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.028905] ata2.00: configured for UDMA/133
[ 2.033301] ata3.00: configured for UDMA/133
[ 2.037651] ata4.00: configured for UDMA/133
[ 2.041946] ata1.00: configured for UDMA/133
[ 2.046327] scsi 0:0:0:0: Direct-Access ATA ST3160815AS B PQ: 0 ANSI: 5
[ 2.056128] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.056260] scsi 1:0:0:0: Direct-Access ATA ST3160815AS D PQ: 0 ANSI: 5
[ 2.064945] sd 0:0:0:0: [sda] Write Protect is off
[ 2.069285] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.069295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.076116] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.076257] scsi 2:0:0:0: Direct-Access ATA ST3160811AS E PQ: 0 ANSI: 5
[ 2.085152] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.089633] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.089644] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.097129] sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.101764] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.106333] scsi 3:0:0:0: Direct-Access ATA ST3160815AS D PQ: 0 ANSI: 5
[ 2.110975] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.110990] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.120134] sd 3:0:0:0: [sdd] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.124906] sd 3:0:0:0: [sdd] Write Protect is off
[ 2.129592] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.129602] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.151748] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.156781] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.175906] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 >
[ 2.180837] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.206207] sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 >
[ 2.211133] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.215702] sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 sdd7 >
[ 2.220543] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 2.375001] tsc: Refined TSC clocksource calibration: 3616.533 MHz
[ 2.379546] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x34215592ba9, max_idle_ns: 440795323316 ns
[ 3.384077] clocksource: Switched to clocksource tsc
[ 6.896070] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.902551] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 12.154112] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 12.160310] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 12.165064] ata7: limiting SATA link speed to 1.5 Gbps
[ 17.311169] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 17.316793] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 17.321791] ata8: limiting SATA link speed to 1.5 Gbps
[ 22.569229] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 22.575908] ata7.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 27.727284] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 27.733274] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 32.986342] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 33.189344] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 33.195244] Freeing unused kernel memory: 996K (ffffffff80ed7000 - ffffffff80fd0000)
[ 33.200505] Write protecting the kernel read-only data: 12288k
[ 33.206263] Freeing unused kernel memory: 1808K (ffff88000083c000 - ffff880000a00000)
[ 33.213547] Freeing unused kernel memory: 1072K (ffff880000cf4000 - ffff880000e00000)
[ 33.220301] random: systemd urandom read with 91 bits of entropy available
[ 33.226340] systemd[1]: systemd 210 running in system mode. (+PAM -LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP +APPARMOR)
[ 33.232147] systemd[1]: Detected architecture 'x86-64'.
[ 33.237788] systemd[1]: Running in initial RAM disk.
[ 33.260880] systemd[1]: Inserted module 'autofs4'
[ 33.266626] systemd[1]: Set hostname to <harley>.
[ 33.304019] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dST3160815AS_6RACD7A6\x2dpart5.device...
[ 33.315719] systemd[1]: Starting Timers.
[ 33.327297] systemd[1]: Reached target Timers.
[ 33.333065] systemd[1]: Starting -.slice.
[ 33.352072] systemd[1]: Created slice -.slice.
[ 33.357920] systemd[1]: Starting udev Control Socket.
[ 33.369707] systemd[1]: Listening on udev Control Socket.
[ 33.375579] systemd[1]: Starting udev Kernel Socket.
[ 33.387203] systemd[1]: Listening on udev Kernel Socket.
[ 33.393006] systemd[1]: Starting Journal Socket.
[ 33.404482] systemd[1]: Listening on Journal Socket.
[ 33.410188] systemd[1]: Starting Sockets.
[ 33.421438] systemd[1]: Reached target Sockets.
[ 33.427040] systemd[1]: Starting System Slice.
[ 33.438154] systemd[1]: Created slice System Slice.
[ 33.443637] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 33.454676] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 33.460217] systemd[1]: Starting dracut cmdline hook...
[ 33.474534] systemd[1]: Starting Load Kernel Modules...
[ 33.485939] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 33.491754] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 33.491786] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 33.491817] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 33.491848] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 33.523464] systemd[1]: Starting Journal Service...
[ 33.534892] systemd[1]: Starting Slices.
[ 33.545952] systemd[1]: Reached target Slices.
[ 33.551403] systemd[1]: Starting Setup Virtual Console...
[ 33.568502] systemd[1]: Starting Swap.
[ 33.579198] systemd[1]: Reached target Swap.
[ 33.579207] systemd[1]: Starting Local File Systems.
[ 33.595128] systemd[1]: Reached target Local File Systems.
[ 33.621350] systemd[1]: Started Journal Service.
[ 33.742352] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 33.747773] ACPI: Power Button [PWRB]
[ 33.748508] wmi: Mapper loaded
[ 33.757428] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 33.757548] ohci-pci: OHCI PCI platform driver
[ 33.757735] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 33.757741] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 33.757779] ohci-pci 0000:00:12.0: irq 18, io mem 0xd880a000
[ 33.758297] ACPI: Power Button [PWRF]
[ 33.772522] random: nonblocking pool is initialized
[ 33.812432] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 33.812433] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 33.812434] usb usb4: Product: OHCI PCI host controller
[ 33.812435] usb usb4: Manufacturer: Linux 4.5.0-rc5 ohci_hcd
[ 33.812436] usb usb4: SerialNumber: 0000:00:12.0
[ 33.812555] hub 4-0:1.0: USB hub found
[ 33.812564] hub 4-0:1.0: 5 ports detected
[ 33.814893] scsi host9: pata_atiixp
[ 33.814988] scsi host10: pata_atiixp
[ 33.815028] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 33.815029] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 33.815141] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 33.815146] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 33.815189] ohci-pci 0000:00:13.0: irq 18, io mem 0xd8808000
[ 33.869503] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 33.869505] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 33.869505] usb usb5: Product: OHCI PCI host controller
[ 33.869506] usb usb5: Manufacturer: Linux 4.5.0-rc5 ohci_hcd
[ 33.869507] usb usb5: SerialNumber: 0000:00:13.0
[ 33.869747] hub 5-0:1.0: USB hub found
[ 33.869756] hub 5-0:1.0: 5 ports detected
[ 33.869965] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 33.869969] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 33.869990] ohci-pci 0000:00:14.5: irq 18, io mem 0xd8806000
[ 33.924983] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 33.924984] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 33.924985] usb usb6: Product: OHCI PCI host controller
[ 33.924986] usb usb6: Manufacturer: Linux 4.5.0-rc5 ohci_hcd
[ 33.924987] usb usb6: SerialNumber: 0000:00:14.5
[ 33.925099] hub 6-0:1.0: USB hub found
[ 33.925108] hub 6-0:1.0: 2 ports detected
[ 33.925282] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 33.925286] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 33.925305] ohci-pci 0000:00:16.0: irq 18, io mem 0xd8805000
[ 33.979447] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 33.979448] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 33.979449] usb usb7: Product: OHCI PCI host controller
[ 33.979450] usb usb7: Manufacturer: Linux 4.5.0-rc5 ohci_hcd
[ 33.979451] usb usb7: SerialNumber: 0000:00:16.0
[ 33.979554] hub 7-0:1.0: USB hub found
[ 33.979563] hub 7-0:1.0: 4 ports detected
[ 33.982031] ata9.00: ATAPI: SONY DVD RW AD-7260S, 1.61, max UDMA/100
[ 33.982255] ata9.01: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 33.982256] ata9.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 33.982259] ata9.00: limited to UDMA/33 due to 40-wire cable
[ 33.982260] ata9.01: limited to UDMA/33 due to 40-wire cable
[ 33.987159] ata9.00: configured for UDMA/33
[ 33.992227] ata9.01: configured for UDMA/33
[ 33.994157] scsi 9:0:0:0: CD-ROM SONY DVD RW AD-7260S 1.61 PQ: 0 ANSI: 5
[ 34.005986] scsi 9:0:0:0: Attached scsi generic sg4 type 5
[ 34.006082] scsi 9:0:1:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 34.044691] sd 9:0:1:0: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 34.044713] sd 9:0:1:0: Attached scsi generic sg5 type 0
[ 34.044721] sd 9:0:1:0: [sde] Write Protect is off
[ 34.044723] sd 9:0:1:0: [sde] Mode Sense: 00 3a 00 00
[ 34.044790] sd 9:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.048632] sde: sde1
[ 34.048833] sd 9:0:1:0: [sde] Attached SCSI disk
[ 34.106367] sr 9:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 34.110823] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 34.110982] sr 9:0:0:0: Attached scsi CD-ROM sr0
[ 34.134359] usb 4-4: new low-speed USB device number 2 using ohci-pci
[ 34.285369] usb 4-4: New USB device found, idVendor=046d, idProduct=c00e
[ 34.285491] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 34.285615] usb 4-4: Product: USB-PS/2 Optical Mouse
[ 34.285700] usb 4-4: Manufacturer: Logitech
[ 34.293611] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/0003:046D:C00E.0001/input/input3
[ 34.293937] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-4/input0
[ 38.886407] scsi host11: Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
<Adaptec 29320LPE PCIe Ultra320 SCSI adapter>
aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
[ 38.897049] scsi 11:0:0:0: Direct-Access SEAGATE ST15150N 5055 PQ: 0 ANSI: 2
[ 38.897196] scsi target11:0:0: asynchronous
[ 38.897268] scsi11:A:0:0: Tagged Queuing enabled. Depth 32
[ 38.897369] scsi target11:0:0: Beginning Domain Validation
[ 38.917564] scsi target11:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[ 38.931872] scsi target11:0:0: Domain Validation skipping write tests
[ 38.931985] scsi target11:0:0: Ending Domain Validation
[ 38.932262] sd 11:0:0:0: Attached scsi generic sg6 type 0
[ 38.950667] sd 11:0:0:0: [sdf] Unsupported sector size 768.
[ 38.950767] sd 11:0:0:0: [sdf] 0 512-byte logical blocks: (0 B/0 B)
[ 38.950876] sd 11:0:0:0: [sdf] 768-byte physical blocks
[ 38.957206] sd 11:0:0:0: [sdf] Write Protect is off
[ 38.957292] sd 11:0:0:0: [sdf] Mode Sense: ab 00 10 08
[ 38.957886] scsi 11:0:1:0: Direct-Access SEAGATE ST15150N 5055 PQ: 0 ANSI: 2
[ 38.958031] scsi target11:0:1: asynchronous
[ 38.958103] scsi11:A:1:0: Tagged Queuing enabled. Depth 32
[ 38.958203] scsi target11:0:1: Beginning Domain Validation
[ 38.964716] sd 11:0:0:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 38.974234] sd 11:0:0:0: [sdf] Unsupported sector size 768.
[ 38.979133] scsi target11:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[ 38.990752] sd 11:0:0:0: [sdf] Attached SCSI disk
[ 38.994524] scsi target11:0:1: Domain Validation skipping write tests
[ 38.994637] scsi target11:0:1: Ending Domain Validation
[ 38.994898] sd 11:0:1:0: Attached scsi generic sg7 type 0
[ 39.268971] sd 11:0:1:0: [sdg] Unsupported sector size 768.
[ 39.269070] sd 11:0:1:0: [sdg] 0 512-byte logical blocks: (0 B/0 B)
[ 39.269178] sd 11:0:1:0: [sdg] 768-byte physical blocks
[ 39.271598] scsi 11:0:3:0: Sequential-Access SONY SDT-10000 0110 PQ: 0 ANSI: 2
[ 39.271743] scsi target11:0:3: asynchronous
[ 39.271816] scsi target11:0:3: Beginning Domain Validation
[ 39.277726] sd 11:0:1:0: [sdg] Write Protect is off
[ 39.277813] sd 11:0:1:0: [sdg] Mode Sense: ab 00 10 08
[ 39.279988] scsi target11:0:3: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
[ 39.285396] scsi target11:0:3: Domain Validation skipping write tests
[ 39.285509] scsi target11:0:3: Ending Domain Validation
[ 39.285749] scsi 11:0:3:0: Attached scsi generic sg8 type 1
[ 39.544775] sd 11:0:1:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 40.576612] sd 11:0:1:0: [sdg] Unsupported sector size 768.
[ 41.608429] sd 11:0:1:0: [sdg] Attached SCSI disk
[ 48.798522] scsi host8: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
[ 49.066033] scsi 8:0:1:0: Sequential-Access HP 88780 A674 PQ: 0 ANSI: 1 CCS
[ 49.066186] scsi target8:0:1: Beginning Domain Validation
[ 49.084705] scsi target8:0:1: Ending Domain Validation
[ 49.084974] scsi 8:0:1:0: Attached scsi generic sg9 type 1
[ 50.688280] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 50.961279] systemd-journald[229]: Received SIGTERM from PID 1 (systemd).
[ 53.059782] device-mapper: uevent: version 1.0.3
[ 53.064825] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 54.631927] systemd-readahead[492]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 56.015949] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 58.514365] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 58.628877] Warning: Processor Platform Limit event detected, but not handled.
[ 58.632609] Consider compiling CPUfreq support into your kernel.
[ 58.850517] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 59.140090] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 59.513680] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 59.517741] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 59.591929] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 59.596202] st 11:0:3:0: Attached scsi tape st0
[ 59.600109] st 11:0:3:0: st0: try direct i/o: yes (alignment 4 B)
[ 59.604265] st 8:0:1:0: Attached scsi tape st1
[ 59.608039] st 8:0:1:0: st1: try direct i/o: yes (alignment 4 B)
[ 60.077996] EXT4-fs (sde1): mounting ext3 file system using the ext4 subsystem
[ 60.109689] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[ 60.392450] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 60.473189] dgap: module is from the staging directory, the quality is unknown, you have been warned.
[ 60.479168] dgap: dgap-1.3-16, Digi International Part Number 40002347_C
[ 60.484884] dgap: For the tools package please visit http://www.digi.com
[ 60.490958] dgap: dgap: board 0: AccelePort Xr920 8 port (rev 1), irq 32
[ 60.549949] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 60.555677] r8169 0000:11:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 60.562045] r8169 0000:11:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000044000, 74:d4:35:1f:b2:9e, XID 0c900800 IRQ 33
[ 60.567956] r8169 0000:11:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 60.749358] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 60.847989] AVX version of gcm_enc/dec engaged.
[ 60.853960] AES CTR mode by8 optimization enabled
[ 60.875022] osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 60.946919] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 60.952650] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 8
[ 60.958489] xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[ 60.964383] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 60.970170] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 60.975975] usb usb8: Product: xHCI Host Controller
[ 60.981768] usb usb8: Manufacturer: Linux 4.5.0-rc5 xhci-hcd
[ 60.987558] usb usb8: SerialNumber: 0000:06:00.0
[ 60.993414] hub 8-0:1.0: USB hub found
[ 60.999069] hub 8-0:1.0: 2 ports detected
[ 61.004736] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 61.010271] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 9
[ 61.015794] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 61.021350] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 61.026825] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 61.026826] usb usb9: Product: xHCI Host Controller
[ 61.026829] usb usb9: Manufacturer: Linux 4.5.0-rc5 xhci-hcd
[ 61.026832] usb usb9: SerialNumber: 0000:06:00.0
[ 61.026941] hub 9-0:1.0: USB hub found
[ 61.026949] hub 9-0:1.0: 2 ports detected
[ 61.027114] xhci_hcd 0000:12:00.0: xHCI Host Controller
[ 61.027118] xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 10
[ 61.027277] xhci_hcd 0000:12:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[ 61.027419] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 61.027420] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 61.027420] usb usb10: Product: xHCI Host Controller
[ 61.027421] usb usb10: Manufacturer: Linux 4.5.0-rc5 xhci-hcd
[ 61.027422] usb usb10: SerialNumber: 0000:12:00.0
[ 61.027555] hub 10-0:1.0: USB hub found
[ 61.027564] hub 10-0:1.0: 2 ports detected
[ 61.027667] xhci_hcd 0000:12:00.0: xHCI Host Controller
[ 61.027670] xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 11
[ 61.027686] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
[ 61.027701] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[ 61.027701] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 61.027702] usb usb11: Product: xHCI Host Controller
[ 61.027703] usb usb11: Manufacturer: Linux 4.5.0-rc5 xhci-hcd
[ 61.027704] usb usb11: SerialNumber: 0000:12:00.0
[ 61.027802] hub 11-0:1.0: USB hub found
[ 61.027810] hub 11-0:1.0: 2 ports detected
[ 61.172487] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 61.364169] EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 61.441858] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 61.455572] EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 61.471972] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 61.481472] EXT4-fs (sdd5): mounting ext3 file system using the ext4 subsystem
[ 61.513728] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 61.526358] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: (null)
[ 61.623213] EXT4-fs (sdd7): mounting ext3 file system using the ext4 subsystem
[ 61.790290] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: (null)
[ 61.805504] EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem
[ 61.855621] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 62.157341] EXT4-fs (sdd6): mounting ext3 file system using the ext4 subsystem
[ 62.217942] EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: (null)
[ 63.380246] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 63.386219] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 63.392213] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 63.398192] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 63.404138] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 63.410053] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 63.415873] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 63.421631] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 63.422286] Adding 8385532k swap on /dev/sda2. Priority:-1 extents:1 across:8385532k FS
[ 63.433156] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 63.456766] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 63.456857] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 63.456944] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 63.457062] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 63.457154] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 63.457226] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 63.457286] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 63.457344] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 64.326730] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 64.571376] 3c59x: Donald Becker and others.
[ 64.577836] 0000:0a:04.0: 3Com PCI 3c905C Tornado at ffffc90000040000.
[ 64.584424] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 64.758883] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 66.915309] kvm: disabled by bios
[ 66.927126] kvm: disabled by bios
[ 66.942117] kvm: disabled by bios
[ 66.957163] kvm: disabled by bios
[ 66.969120] kvm: disabled by bios
[ 66.984171] kvm: disabled by bios
[ 66.996110] kvm: disabled by bios
[ 67.014101] kvm: disabled by bios
[ 144.690953] systemd-journald[495]: Received request to flush runtime journal from PID 1
[ 145.667553] audit: type=1305 audit(1456513363.440:2): audit_pid=919 old=0 auid=4294967295 ses=4294967295 res=1
[ 145.837626] systemd[1]: Received SIGRTMIN+21 from PID 337 (plymouthd).
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <56D0A565.8080406-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-02-29 17:42 ` Joerg Roedel
[not found] ` <20160229174252.GN22747-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Joerg Roedel @ 2016-02-29 17:42 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi Mark,
On Fri, Feb 26, 2016 at 02:20:05PM -0500, Mark Hounschell wrote:
> On 02/26/2016 11:23 AM, Joerg Roedel wrote:
> > Can you please boot a v4.5-rc5 kernel with iommu enabled and
> > 'amd_iommu_dump' on the kernel command line and send me dmesg after
> > boot again?
> >
> >
>
> Here ya go Joerg,
>
> See ata7 and ata8 failure messages. These are the 2 disks that don't come up. They are hanging off one of these two Marvell chips.
>
> 07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
> 13:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
Thanks for the dmesg. It does not contain IO_PAGE_FAULTs anymore, did it
in the past? If yes, which device-ids were the faults reported against?
I can't really say yet why it does not work on your system. The IOMMU
core groups the devices 00:15.0-2 and 11-13:00.0 together. This means
that they all end up in the same iommu group.
But according to the IVRS ACPI table on your system none of these
devices has an alias defined. So this doesn't explain why the commit
you bisected it down to causes the problem, because the commit is about
alias handling (which the devices in question don't need).
Maybe I send you some debug patches to try out, but I stare at the code
a little bit more first.
Joerg
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160229174252.GN22747-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2016-02-29 17:52 ` Mark Hounschell
[not found] ` <56D48560.4010904-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-02-29 17:52 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 02/29/2016 12:42 PM, Joerg Roedel wrote:
> Hi Mark,
>
> On Fri, Feb 26, 2016 at 02:20:05PM -0500, Mark Hounschell wrote:
>> On 02/26/2016 11:23 AM, Joerg Roedel wrote:
>>> Can you please boot a v4.5-rc5 kernel with iommu enabled and
>>> 'amd_iommu_dump' on the kernel command line and send me dmesg after
>>> boot again?
>>>
>>>
>>
>> Here ya go Joerg,
>>
>> See ata7 and ata8 failure messages. These are the 2 disks that don't come up. They are hanging off one of these two Marvell chips.
>>
>> 07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
>> 13:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12)
>
> Thanks for the dmesg. It does not contain IO_PAGE_FAULTs anymore, did it
> in the past? If yes, which device-ids were the faults reported against?
>
The original report from me at the top of this thread was that the
machine would not come up at all. Many IO_PAGE_FAULTs.
The patch by Baoquan He <bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
iommu/amd: Correct the wrong setting of alias DTE in do_attach
commit 9b1a12d29109234d2b9718d04d4d404b7da4e794 upstream
fixed that issue but left me with these 2 disk not coming up. If I
disable the iommu in the BIOS, all the disks work fine.
> I can't really say yet why it does not work on your system. The IOMMU
> core groups the devices 00:15.0-2 and 11-13:00.0 together. This means
> that they all end up in the same iommu group.
>
> But according to the IVRS ACPI table on your system none of these
> devices has an alias defined. So this doesn't explain why the commit
> you bisected it down to causes the problem, because the commit is about
> alias handling (which the devices in question don't need).
>
> Maybe I send you some debug patches to try out, but I stare at the code
> a little bit more first.
>
OK
Mark
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <56D48560.4010904-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-03-18 17:24 ` Mark Hounschell
[not found] ` <56EC39CB.2010909-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-03-18 17:24 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 02/29/2016 12:52 PM, Mark Hounschell wrote:
> On 02/29/2016 12:42 PM, Joerg Roedel wrote:
>> Hi Mark,
>>
>> On Fri, Feb 26, 2016 at 02:20:05PM -0500, Mark Hounschell wrote:
>>> On 02/26/2016 11:23 AM, Joerg Roedel wrote:
>>>> Can you please boot a v4.5-rc5 kernel with iommu enabled and
>>>> 'amd_iommu_dump' on the kernel command line and send me dmesg after
>>>> boot again?
>>>>
>>>>
>>>
>>> Here ya go Joerg,
>>>
>>> See ata7 and ata8 failure messages. These are the 2 disks that don't
>>> come up. They are hanging off one of these two Marvell chips.
>>>
>>> 07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA
>>> 6Gb/s Controller (rev 12)
>>> 13:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA
>>> 6Gb/s Controller (rev 12)
>>
>> Thanks for the dmesg. It does not contain IO_PAGE_FAULTs anymore, did it
>> in the past? If yes, which device-ids were the faults reported against?
>>
>
> The original report from me at the top of this thread was that the
> machine would not come up at all. Many IO_PAGE_FAULTs.
>
> The patch by Baoquan He <bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>
> iommu/amd: Correct the wrong setting of alias DTE in do_attach
> commit 9b1a12d29109234d2b9718d04d4d404b7da4e794 upstream
>
> fixed that issue but left me with these 2 disk not coming up. If I
> disable the iommu in the BIOS, all the disks work fine.
>
>
>> I can't really say yet why it does not work on your system. The IOMMU
>> core groups the devices 00:15.0-2 and 11-13:00.0 together. This means
>> that they all end up in the same iommu group.
>>
>> But according to the IVRS ACPI table on your system none of these
>> devices has an alias defined. So this doesn't explain why the commit
>> you bisected it down to causes the problem, because the commit is about
>> alias handling (which the devices in question don't need).
>>
>> Maybe I send you some debug patches to try out, but I stare at the code
>> a little bit more first.
>>
>
> OK
Should I submit a kernel bug report on this?
Mark
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <56EC39CB.2010909-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-04-11 13:54 ` Joerg Roedel
[not found] ` <20160411135451.GO17838-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Joerg Roedel @ 2016-04-11 13:54 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Hi Mark,
On Fri, Mar 18, 2016 at 01:24:27PM -0400, Mark Hounschell wrote:
> Should I submit a kernel bug report on this?
I just fixed a regression in v4.4. Can you please try the attached patch
and report if it fixes your problem too? The patch is against v4.6-rc2.
Thanks,
Joerg
>From e76e8764c9265b5dec31e6a8e5be61f028866d93 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
Date: Fri, 8 Apr 2016 15:12:24 +0200
Subject: [PATCH] iommu/amd: Fix checking of pci dma aliases
Commit 61289cb ('iommu/amd: Remove old alias handling code')
removed the old alias handling code from the AMD IOMMU
driver because this is now handled by the IOMMU core code.
But this also removed the handling of PCI aliases, which is
not handled by the core code. This caused issues with PCI
devices that have hidden PCIe-to-PCI bridges that rewrite
the request-id.
Fix this bug by re-introducing some of the removed functions
from commit 61289cbaf6c8 and add a alias field
'struct iommu_dev_data'. This field carrys the return value
of the get_alias() function and uses that instead of the
amd_iommu_alias_table[] array in the code.
Fixes: 61289cbaf6c8 ('iommu/amd: Remove old alias handling code')
Cc: stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org # v4.4+
Signed-off-by: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
---
drivers/iommu/amd_iommu.c | 87 +++++++++++++++++++++++++++++++++++++++++------
1 file changed, 76 insertions(+), 11 deletions(-)
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 374c129..5efadad 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -92,6 +92,7 @@ struct iommu_dev_data {
struct list_head dev_data_list; /* For global dev_data_list */
struct protection_domain *domain; /* Domain the device is bound to */
u16 devid; /* PCI Device ID */
+ u16 alias; /* Alias Device ID */
bool iommu_v2; /* Device can make use of IOMMUv2 */
bool passthrough; /* Device is identity mapped */
struct {
@@ -166,6 +167,13 @@ static struct protection_domain *to_pdomain(struct iommu_domain *dom)
return container_of(dom, struct protection_domain, domain);
}
+static inline u16 get_device_id(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ return PCI_DEVID(pdev->bus->number, pdev->devfn);
+}
+
static struct iommu_dev_data *alloc_dev_data(u16 devid)
{
struct iommu_dev_data *dev_data;
@@ -203,6 +211,68 @@ out_unlock:
return dev_data;
}
+static int __last_alias(struct pci_dev *pdev, u16 alias, void *data)
+{
+ *(u16 *)data = alias;
+ return 0;
+}
+
+static u16 get_alias(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ u16 devid, ivrs_alias, pci_alias;
+
+ devid = get_device_id(dev);
+ ivrs_alias = amd_iommu_alias_table[devid];
+ pci_for_each_dma_alias(pdev, __last_alias, &pci_alias);
+
+ if (ivrs_alias == pci_alias)
+ return ivrs_alias;
+
+ /*
+ * DMA alias showdown
+ *
+ * The IVRS is fairly reliable in telling us about aliases, but it
+ * can't know about every screwy device. If we don't have an IVRS
+ * reported alias, use the PCI reported alias. In that case we may
+ * still need to initialize the rlookup and dev_table entries if the
+ * alias is to a non-existent device.
+ */
+ if (ivrs_alias == devid) {
+ if (!amd_iommu_rlookup_table[pci_alias]) {
+ amd_iommu_rlookup_table[pci_alias] =
+ amd_iommu_rlookup_table[devid];
+ memcpy(amd_iommu_dev_table[pci_alias].data,
+ amd_iommu_dev_table[devid].data,
+ sizeof(amd_iommu_dev_table[pci_alias].data));
+ }
+
+ return pci_alias;
+ }
+
+ pr_info("AMD-Vi: Using IVRS reported alias %02x:%02x.%d "
+ "for device %s[%04x:%04x], kernel reported alias "
+ "%02x:%02x.%d\n", PCI_BUS_NUM(ivrs_alias), PCI_SLOT(ivrs_alias),
+ PCI_FUNC(ivrs_alias), dev_name(dev), pdev->vendor, pdev->device,
+ PCI_BUS_NUM(pci_alias), PCI_SLOT(pci_alias),
+ PCI_FUNC(pci_alias));
+
+ /*
+ * If we don't have a PCI DMA alias and the IVRS alias is on the same
+ * bus, then the IVRS table may know about a quirk that we don't.
+ */
+ if (pci_alias == devid &&
+ PCI_BUS_NUM(ivrs_alias) == pdev->bus->number) {
+ pdev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN;
+ pdev->dma_alias_devfn = ivrs_alias & 0xff;
+ pr_info("AMD-Vi: Added PCI DMA alias %02x.%d for %s\n",
+ PCI_SLOT(ivrs_alias), PCI_FUNC(ivrs_alias),
+ dev_name(dev));
+ }
+
+ return ivrs_alias;
+}
+
static struct iommu_dev_data *find_dev_data(u16 devid)
{
struct iommu_dev_data *dev_data;
@@ -215,13 +285,6 @@ static struct iommu_dev_data *find_dev_data(u16 devid)
return dev_data;
}
-static inline u16 get_device_id(struct device *dev)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
-
- return PCI_DEVID(pdev->bus->number, pdev->devfn);
-}
-
static struct iommu_dev_data *get_dev_data(struct device *dev)
{
return dev->archdata.iommu;
@@ -349,6 +412,8 @@ static int iommu_init_device(struct device *dev)
if (!dev_data)
return -ENOMEM;
+ dev_data->alias = get_alias(dev);
+
if (pci_iommuv2_capable(pdev)) {
struct amd_iommu *iommu;
@@ -369,7 +434,7 @@ static void iommu_ignore_device(struct device *dev)
u16 devid, alias;
devid = get_device_id(dev);
- alias = amd_iommu_alias_table[devid];
+ alias = get_alias(dev);
memset(&amd_iommu_dev_table[devid], 0, sizeof(struct dev_table_entry));
memset(&amd_iommu_dev_table[alias], 0, sizeof(struct dev_table_entry));
@@ -1061,7 +1126,7 @@ static int device_flush_dte(struct iommu_dev_data *dev_data)
int ret;
iommu = amd_iommu_rlookup_table[dev_data->devid];
- alias = amd_iommu_alias_table[dev_data->devid];
+ alias = dev_data->alias;
ret = iommu_flush_dte(iommu, dev_data->devid);
if (!ret && alias != dev_data->devid)
@@ -2039,7 +2104,7 @@ static void do_attach(struct iommu_dev_data *dev_data,
bool ats;
iommu = amd_iommu_rlookup_table[dev_data->devid];
- alias = amd_iommu_alias_table[dev_data->devid];
+ alias = dev_data->alias;
ats = dev_data->ats.enabled;
/* Update data structures */
@@ -2073,7 +2138,7 @@ static void do_detach(struct iommu_dev_data *dev_data)
return;
iommu = amd_iommu_rlookup_table[dev_data->devid];
- alias = amd_iommu_alias_table[dev_data->devid];
+ alias = dev_data->alias;
/* decrease reference counters */
dev_data->domain->dev_iommu[iommu->index] -= 1;
--
1.8.4.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <20160411135451.GO17838-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
@ 2016-04-11 14:59 ` Mark Hounschell
[not found] ` <570BBBE4.9040307-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
0 siblings, 1 reply; 32+ messages in thread
From: Mark Hounschell @ 2016-04-11 14:59 UTC (permalink / raw)
To: Joerg Roedel; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On 04/11/2016 09:54 AM, Joerg Roedel wrote:
> Hi Mark,
>
> On Fri, Mar 18, 2016 at 01:24:27PM -0400, Mark Hounschell wrote:
>> Should I submit a kernel bug report on this?
>
> I just fixed a regression in v4.4. Can you please try the attached patch
> and report if it fixes your problem too? The patch is against v4.6-rc2.
>
>
> Thanks,
>
> Joerg
>
Hi Joerg,
Yes this patch fixes my problem.
Mark
>>From e76e8764c9265b5dec31e6a8e5be61f028866d93 Mon Sep 17 00:00:00 2001
> From: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
> Date: Fri, 8 Apr 2016 15:12:24 +0200
> Subject: [PATCH] iommu/amd: Fix checking of pci dma aliases
>
> Commit 61289cb ('iommu/amd: Remove old alias handling code')
> removed the old alias handling code from the AMD IOMMU
> driver because this is now handled by the IOMMU core code.
>
> But this also removed the handling of PCI aliases, which is
> not handled by the core code. This caused issues with PCI
> devices that have hidden PCIe-to-PCI bridges that rewrite
> the request-id.
>
> Fix this bug by re-introducing some of the removed functions
> from commit 61289cbaf6c8 and add a alias field
> 'struct iommu_dev_data'. This field carrys the return value
> of the get_alias() function and uses that instead of the
> amd_iommu_alias_table[] array in the code.
>
> Fixes: 61289cbaf6c8 ('iommu/amd: Remove old alias handling code')
> Cc: stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org # v4.4+
> Signed-off-by: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
> ---
> drivers/iommu/amd_iommu.c | 87 +++++++++++++++++++++++++++++++++++++++++------
> 1 file changed, 76 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> index 374c129..5efadad 100644
> --- a/drivers/iommu/amd_iommu.c
> +++ b/drivers/iommu/amd_iommu.c
> @@ -92,6 +92,7 @@ struct iommu_dev_data {
> struct list_head dev_data_list; /* For global dev_data_list */
> struct protection_domain *domain; /* Domain the device is bound to */
> u16 devid; /* PCI Device ID */
> + u16 alias; /* Alias Device ID */
> bool iommu_v2; /* Device can make use of IOMMUv2 */
> bool passthrough; /* Device is identity mapped */
> struct {
> @@ -166,6 +167,13 @@ static struct protection_domain *to_pdomain(struct iommu_domain *dom)
> return container_of(dom, struct protection_domain, domain);
> }
>
> +static inline u16 get_device_id(struct device *dev)
> +{
> + struct pci_dev *pdev = to_pci_dev(dev);
> +
> + return PCI_DEVID(pdev->bus->number, pdev->devfn);
> +}
> +
> static struct iommu_dev_data *alloc_dev_data(u16 devid)
> {
> struct iommu_dev_data *dev_data;
> @@ -203,6 +211,68 @@ out_unlock:
> return dev_data;
> }
>
> +static int __last_alias(struct pci_dev *pdev, u16 alias, void *data)
> +{
> + *(u16 *)data = alias;
> + return 0;
> +}
> +
> +static u16 get_alias(struct device *dev)
> +{
> + struct pci_dev *pdev = to_pci_dev(dev);
> + u16 devid, ivrs_alias, pci_alias;
> +
> + devid = get_device_id(dev);
> + ivrs_alias = amd_iommu_alias_table[devid];
> + pci_for_each_dma_alias(pdev, __last_alias, &pci_alias);
> +
> + if (ivrs_alias == pci_alias)
> + return ivrs_alias;
> +
> + /*
> + * DMA alias showdown
> + *
> + * The IVRS is fairly reliable in telling us about aliases, but it
> + * can't know about every screwy device. If we don't have an IVRS
> + * reported alias, use the PCI reported alias. In that case we may
> + * still need to initialize the rlookup and dev_table entries if the
> + * alias is to a non-existent device.
> + */
> + if (ivrs_alias == devid) {
> + if (!amd_iommu_rlookup_table[pci_alias]) {
> + amd_iommu_rlookup_table[pci_alias] =
> + amd_iommu_rlookup_table[devid];
> + memcpy(amd_iommu_dev_table[pci_alias].data,
> + amd_iommu_dev_table[devid].data,
> + sizeof(amd_iommu_dev_table[pci_alias].data));
> + }
> +
> + return pci_alias;
> + }
> +
> + pr_info("AMD-Vi: Using IVRS reported alias %02x:%02x.%d "
> + "for device %s[%04x:%04x], kernel reported alias "
> + "%02x:%02x.%d\n", PCI_BUS_NUM(ivrs_alias), PCI_SLOT(ivrs_alias),
> + PCI_FUNC(ivrs_alias), dev_name(dev), pdev->vendor, pdev->device,
> + PCI_BUS_NUM(pci_alias), PCI_SLOT(pci_alias),
> + PCI_FUNC(pci_alias));
> +
> + /*
> + * If we don't have a PCI DMA alias and the IVRS alias is on the same
> + * bus, then the IVRS table may know about a quirk that we don't.
> + */
> + if (pci_alias == devid &&
> + PCI_BUS_NUM(ivrs_alias) == pdev->bus->number) {
> + pdev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN;
> + pdev->dma_alias_devfn = ivrs_alias & 0xff;
> + pr_info("AMD-Vi: Added PCI DMA alias %02x.%d for %s\n",
> + PCI_SLOT(ivrs_alias), PCI_FUNC(ivrs_alias),
> + dev_name(dev));
> + }
> +
> + return ivrs_alias;
> +}
> +
> static struct iommu_dev_data *find_dev_data(u16 devid)
> {
> struct iommu_dev_data *dev_data;
> @@ -215,13 +285,6 @@ static struct iommu_dev_data *find_dev_data(u16 devid)
> return dev_data;
> }
>
> -static inline u16 get_device_id(struct device *dev)
> -{
> - struct pci_dev *pdev = to_pci_dev(dev);
> -
> - return PCI_DEVID(pdev->bus->number, pdev->devfn);
> -}
> -
> static struct iommu_dev_data *get_dev_data(struct device *dev)
> {
> return dev->archdata.iommu;
> @@ -349,6 +412,8 @@ static int iommu_init_device(struct device *dev)
> if (!dev_data)
> return -ENOMEM;
>
> + dev_data->alias = get_alias(dev);
> +
> if (pci_iommuv2_capable(pdev)) {
> struct amd_iommu *iommu;
>
> @@ -369,7 +434,7 @@ static void iommu_ignore_device(struct device *dev)
> u16 devid, alias;
>
> devid = get_device_id(dev);
> - alias = amd_iommu_alias_table[devid];
> + alias = get_alias(dev);
>
> memset(&amd_iommu_dev_table[devid], 0, sizeof(struct dev_table_entry));
> memset(&amd_iommu_dev_table[alias], 0, sizeof(struct dev_table_entry));
> @@ -1061,7 +1126,7 @@ static int device_flush_dte(struct iommu_dev_data *dev_data)
> int ret;
>
> iommu = amd_iommu_rlookup_table[dev_data->devid];
> - alias = amd_iommu_alias_table[dev_data->devid];
> + alias = dev_data->alias;
>
> ret = iommu_flush_dte(iommu, dev_data->devid);
> if (!ret && alias != dev_data->devid)
> @@ -2039,7 +2104,7 @@ static void do_attach(struct iommu_dev_data *dev_data,
> bool ats;
>
> iommu = amd_iommu_rlookup_table[dev_data->devid];
> - alias = amd_iommu_alias_table[dev_data->devid];
> + alias = dev_data->alias;
> ats = dev_data->ats.enabled;
>
> /* Update data structures */
> @@ -2073,7 +2138,7 @@ static void do_detach(struct iommu_dev_data *dev_data)
> return;
>
> iommu = amd_iommu_rlookup_table[dev_data->devid];
> - alias = amd_iommu_alias_table[dev_data->devid];
> + alias = dev_data->alias;
>
> /* decrease reference counters */
> dev_data->domain->dev_iommu[iommu->index] -= 1;
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Can't boot new 4.4 kernel with IOMMU enabled
[not found] ` <570BBBE4.9040307-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
@ 2016-04-11 15:43 ` Joerg Roedel
0 siblings, 0 replies; 32+ messages in thread
From: Joerg Roedel @ 2016-04-11 15:43 UTC (permalink / raw)
To: Mark Hounschell; +Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
On Mon, Apr 11, 2016 at 10:59:48AM -0400, Mark Hounschell wrote:
> Yes this patch fixes my problem.
Awesome, thanks for testing. I'll send it upstream soon and then it
should hit the various stable-kernels.
Joerg
^ permalink raw reply [flat|nested] 32+ messages in thread
end of thread, other threads:[~2016-04-11 15:43 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-01-12 21:37 Can't boot new 4.4 kernel with IOMMU enabled Mark Hounschell
[not found] ` <56957209.1080202-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-01-13 3:09 ` Baoquan He
[not found] ` <20160113030950.GB11902-0VdLhd/A9PlfpSRLqpFUpR/sF2h8X+2i0E9HWUfgJXw@public.gmane.org>
2016-01-13 14:42 ` Mark Hounschell
[not found] ` <56966244.80700-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-01-14 0:05 ` Baoquan He
[not found] ` <20160114000520.GA2449-ejN7fcUYdH/by3iVrkZq2A@public.gmane.org>
2016-01-14 14:04 ` Mark Hounschell
[not found] ` <5697AAD8.1000105-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-01-20 15:38 ` Joerg Roedel
[not found] ` <20160120153823.GG18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-01-20 15:46 ` Joerg Roedel
[not found] ` <20160120154658.GH18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-01-20 16:04 ` Mark Hounschell
[not found] ` <569FB013.4050709-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-01-20 16:19 ` Joerg Roedel
[not found] ` <20160120161904.GI18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-01-20 18:19 ` Mark Hounschell
[not found] ` <569FCFC8.2000606-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-01-20 18:26 ` Joerg Roedel
[not found] ` <20160120182602.GJ18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-01-20 19:32 ` Mark Hounschell
[not found] ` <569FE0B0.4030902-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-01-20 20:30 ` Joerg Roedel
2016-01-21 14:50 ` Mark Hounschell
[not found] ` <56A0F03C.8010109-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-01-21 14:58 ` Mark Hounschell
[not found] ` <56A0F221.10502-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-01-21 22:39 ` Joerg Roedel
[not found] ` <20160121223958.GL18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-02-02 15:49 ` Mark Hounschell
[not found] ` <56B0CFF7.80907-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-02-16 16:24 ` Joerg Roedel
[not found] ` <20160216162455.GX18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-02-16 17:32 ` Mark Hounschell
[not found] ` <56C35D1A.9080307-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-02-26 16:23 ` Joerg Roedel
[not found] ` <20160226162319.GH22747-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-02-26 19:20 ` Mark Hounschell
[not found] ` <56D0A565.8080406-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-02-29 17:42 ` Joerg Roedel
[not found] ` <20160229174252.GN22747-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-02-29 17:52 ` Mark Hounschell
[not found] ` <56D48560.4010904-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-03-18 17:24 ` Mark Hounschell
[not found] ` <56EC39CB.2010909-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-04-11 13:54 ` Joerg Roedel
[not found] ` <20160411135451.GO17838-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-04-11 14:59 ` Mark Hounschell
[not found] ` <570BBBE4.9040307-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-04-11 15:43 ` Joerg Roedel
2016-01-20 15:56 ` Mark Hounschell
2016-01-20 12:31 ` Joerg Roedel
[not found] ` <20160120123116.GF18805-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2016-01-20 13:03 ` Mark Hounschell
[not found] ` <569F858E.4060701-n2QNKt385d+sTnJN9+BGXg@public.gmane.org>
2016-01-20 13:18 ` Baoquan He
2016-01-20 13:03 ` Baoquan He
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.