All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: "Andrew F. Davis" <afd@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	devicetree@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC
Date: Tue, 26 Jan 2016 14:03:12 +0000	[thread overview]
Message-ID: <20160126140312.GB3368@x1> (raw)
In-Reply-To: <1453737012-3130-4-git-send-email-afd@ti.com>

On Mon, 25 Jan 2016, Andrew F. Davis wrote:

> Add support for the TPS65086 PMIC GPOs.
> 
> TPS65086 has four configurable GPOs that can be used for several
> purposes. These are output only.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
>  drivers/gpio/Kconfig         |   6 ++
>  drivers/gpio/Makefile        |   1 +
>  drivers/gpio/gpio-tps65086.c | 144 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 151 insertions(+)
>  create mode 100644 drivers/gpio/gpio-tps65086.c

Is this patch orthogonal to the other two in the set, or do they all
need to go in together?

> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index c88dd24..e35e120 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -844,6 +844,12 @@ config GPIO_TIMBERDALE
>  	---help---
>  	Add support for the GPIO IP in the timberdale FPGA.
>  
> +config GPIO_TPS65086
> +	tristate "TI TPS65086 GPO"
> +	depends on MFD_TPS65086
> +	help
> +	  This driver supports the GPO on TI TPS65086x PMICs.
> +
>  config GPIO_TPS6586X
>  	bool "TPS6586X GPIO"
>  	depends on MFD_TPS6586X
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index ece7d7c..c759190 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -95,6 +95,7 @@ obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
>  obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
>  obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
>  obj-$(CONFIG_GPIO_PALMAS)	+= gpio-palmas.o
> +obj-$(CONFIG_GPIO_TPS65086)	+= gpio-tps65086.o
>  obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o
>  obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
>  obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
> diff --git a/drivers/gpio/gpio-tps65086.c b/drivers/gpio/gpio-tps65086.c
> new file mode 100644
> index 0000000..d5d9e47
> --- /dev/null
> +++ b/drivers/gpio/gpio-tps65086.c
> @@ -0,0 +1,144 @@
> +/*
> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
> + *	Andrew F. Davis <afd@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License version 2 for more details.
> + *
> + * Based on the TPS65912 driver
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/mfd/tps65086.h>
> +
> +struct tps65086_gpio {
> +	struct gpio_chip chip;
> +	struct tps65086 *tps;
> +};
> +
> +static inline struct tps65086_gpio *to_tps65086_gpio(struct gpio_chip *chip)
> +{
> +	return container_of(chip, struct tps65086_gpio, chip);
> +}
> +
> +static int tps65086_gpio_get_direction(struct gpio_chip *chip,
> +				       unsigned offset)
> +{
> +	/* This device is output only */
> +	return 0;
> +}
> +
> +static int tps65086_gpio_direction_input(struct gpio_chip *chip,
> +					 unsigned offset)
> +{
> +	/* This device is output only */
> +	return -EINVAL;
> +}
> +
> +static int tps65086_gpio_direction_output(struct gpio_chip *chip,
> +					  unsigned offset, int value)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +
> +	/* Set the initial value */
> +	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
> +			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
> +
> +	return 0;
> +}
> +
> +static int tps65086_gpio_get(struct gpio_chip *chip, unsigned offset)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +	int ret, val;
> +
> +	ret = regmap_read(gpio->tps->regmap, TPS65086_GPOCTRL, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return val & BIT(4 + offset);
> +}
> +
> +static void tps65086_gpio_set(struct gpio_chip *chip, unsigned offset,
> +			      int value)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +
> +	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
> +			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
> +}
> +
> +static struct gpio_chip template_chip = {
> +	.label			= "tps65086-gpio",
> +	.owner			= THIS_MODULE,
> +	.get_direction		= tps65086_gpio_get_direction,
> +	.direction_input	= tps65086_gpio_direction_input,
> +	.direction_output	= tps65086_gpio_direction_output,
> +	.get			= tps65086_gpio_get,
> +	.set			= tps65086_gpio_set,
> +	.base			= -1,
> +	.ngpio			= 4,
> +	.can_sleep		= true,
> +};
> +
> +static int tps65086_gpio_probe(struct platform_device *pdev)
> +{
> +	struct tps65086_gpio *gpio;
> +	int ret;
> +
> +	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
> +	if (!gpio)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, gpio);
> +
> +	gpio->tps = dev_get_drvdata(pdev->dev.parent);
> +	gpio->chip = template_chip;
> +	gpio->chip.parent = gpio->tps->dev;
> +
> +	ret = gpiochip_add(&gpio->chip);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tps65086_gpio_remove(struct platform_device *pdev)
> +{
> +	struct tps65086_gpio *gpio = platform_get_drvdata(pdev);
> +
> +	gpiochip_remove(&gpio->chip);
> +
> +	return 0;
> +}
> +
> +static const struct platform_device_id tps65086_gpio_id_table[] = {
> +	{ "tps65086-gpio", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(platform, tps65086_gpio_id_table);
> +
> +static struct platform_driver tps65086_gpio_driver = {
> +	.driver = {
> +		.name = "tps65086-gpio",
> +	},
> +	.probe = tps65086_gpio_probe,
> +	.remove = tps65086_gpio_remove,
> +	.id_table = tps65086_gpio_id_table,
> +};
> +module_platform_driver(tps65086_gpio_driver);
> +
> +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
> +MODULE_DESCRIPTION("TPS65086 GPIO driver");
> +MODULE_LICENSE("GPL v2");

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: "Andrew F. Davis" <afd@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	devicetree@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC
Date: Tue, 26 Jan 2016 14:03:12 +0000	[thread overview]
Message-ID: <20160126140312.GB3368@x1> (raw)
In-Reply-To: <1453737012-3130-4-git-send-email-afd@ti.com>

On Mon, 25 Jan 2016, Andrew F. Davis wrote:

> Add support for the TPS65086 PMIC GPOs.
> 
> TPS65086 has four configurable GPOs that can be used for several
> purposes. These are output only.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
>  drivers/gpio/Kconfig         |   6 ++
>  drivers/gpio/Makefile        |   1 +
>  drivers/gpio/gpio-tps65086.c | 144 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 151 insertions(+)
>  create mode 100644 drivers/gpio/gpio-tps65086.c

Is this patch orthogonal to the other two in the set, or do they all
need to go in together?

> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index c88dd24..e35e120 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -844,6 +844,12 @@ config GPIO_TIMBERDALE
>  	---help---
>  	Add support for the GPIO IP in the timberdale FPGA.
>  
> +config GPIO_TPS65086
> +	tristate "TI TPS65086 GPO"
> +	depends on MFD_TPS65086
> +	help
> +	  This driver supports the GPO on TI TPS65086x PMICs.
> +
>  config GPIO_TPS6586X
>  	bool "TPS6586X GPIO"
>  	depends on MFD_TPS6586X
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index ece7d7c..c759190 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -95,6 +95,7 @@ obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
>  obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
>  obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
>  obj-$(CONFIG_GPIO_PALMAS)	+= gpio-palmas.o
> +obj-$(CONFIG_GPIO_TPS65086)	+= gpio-tps65086.o
>  obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o
>  obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
>  obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
> diff --git a/drivers/gpio/gpio-tps65086.c b/drivers/gpio/gpio-tps65086.c
> new file mode 100644
> index 0000000..d5d9e47
> --- /dev/null
> +++ b/drivers/gpio/gpio-tps65086.c
> @@ -0,0 +1,144 @@
> +/*
> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
> + *	Andrew F. Davis <afd@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License version 2 for more details.
> + *
> + * Based on the TPS65912 driver
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/mfd/tps65086.h>
> +
> +struct tps65086_gpio {
> +	struct gpio_chip chip;
> +	struct tps65086 *tps;
> +};
> +
> +static inline struct tps65086_gpio *to_tps65086_gpio(struct gpio_chip *chip)
> +{
> +	return container_of(chip, struct tps65086_gpio, chip);
> +}
> +
> +static int tps65086_gpio_get_direction(struct gpio_chip *chip,
> +				       unsigned offset)
> +{
> +	/* This device is output only */
> +	return 0;
> +}
> +
> +static int tps65086_gpio_direction_input(struct gpio_chip *chip,
> +					 unsigned offset)
> +{
> +	/* This device is output only */
> +	return -EINVAL;
> +}
> +
> +static int tps65086_gpio_direction_output(struct gpio_chip *chip,
> +					  unsigned offset, int value)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +
> +	/* Set the initial value */
> +	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
> +			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
> +
> +	return 0;
> +}
> +
> +static int tps65086_gpio_get(struct gpio_chip *chip, unsigned offset)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +	int ret, val;
> +
> +	ret = regmap_read(gpio->tps->regmap, TPS65086_GPOCTRL, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return val & BIT(4 + offset);
> +}
> +
> +static void tps65086_gpio_set(struct gpio_chip *chip, unsigned offset,
> +			      int value)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +
> +	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
> +			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
> +}
> +
> +static struct gpio_chip template_chip = {
> +	.label			= "tps65086-gpio",
> +	.owner			= THIS_MODULE,
> +	.get_direction		= tps65086_gpio_get_direction,
> +	.direction_input	= tps65086_gpio_direction_input,
> +	.direction_output	= tps65086_gpio_direction_output,
> +	.get			= tps65086_gpio_get,
> +	.set			= tps65086_gpio_set,
> +	.base			= -1,
> +	.ngpio			= 4,
> +	.can_sleep		= true,
> +};
> +
> +static int tps65086_gpio_probe(struct platform_device *pdev)
> +{
> +	struct tps65086_gpio *gpio;
> +	int ret;
> +
> +	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
> +	if (!gpio)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, gpio);
> +
> +	gpio->tps = dev_get_drvdata(pdev->dev.parent);
> +	gpio->chip = template_chip;
> +	gpio->chip.parent = gpio->tps->dev;
> +
> +	ret = gpiochip_add(&gpio->chip);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tps65086_gpio_remove(struct platform_device *pdev)
> +{
> +	struct tps65086_gpio *gpio = platform_get_drvdata(pdev);
> +
> +	gpiochip_remove(&gpio->chip);
> +
> +	return 0;
> +}
> +
> +static const struct platform_device_id tps65086_gpio_id_table[] = {
> +	{ "tps65086-gpio", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(platform, tps65086_gpio_id_table);
> +
> +static struct platform_driver tps65086_gpio_driver = {
> +	.driver = {
> +		.name = "tps65086-gpio",
> +	},
> +	.probe = tps65086_gpio_probe,
> +	.remove = tps65086_gpio_remove,
> +	.id_table = tps65086_gpio_id_table,
> +};
> +module_platform_driver(tps65086_gpio_driver);
> +
> +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
> +MODULE_DESCRIPTION("TPS65086 GPIO driver");
> +MODULE_LICENSE("GPL v2");

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2016-01-26 14:03 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-25 15:50 [PATCH v6 0/3] Add support for the TI TPS65086 PMIC Andrew F. Davis
2016-01-25 15:50 ` Andrew F. Davis
2016-01-25 15:50 ` [PATCH v6 1/3] Documentation: tps65086: Add DT bindings for the " Andrew F. Davis
2016-01-25 15:50   ` Andrew F. Davis
     [not found]   ` <1453737012-3130-2-git-send-email-afd-l0cyMroinI0@public.gmane.org>
2016-01-26 14:02     ` Lee Jones
2016-01-26 14:02       ` Lee Jones
2016-01-27  7:28   ` Lee Jones
2016-01-27  7:28     ` Lee Jones
2016-01-25 15:50 ` [PATCH v6 2/3] mfd: tps65086: Add driver " Andrew F. Davis
2016-01-25 15:50   ` Andrew F. Davis
2016-01-27  7:29   ` Lee Jones
2016-01-27  7:29     ` Lee Jones
2016-01-25 15:50 ` [PATCH v6 3/3] gpio: tps65086: Add GPO " Andrew F. Davis
2016-01-25 15:50   ` Andrew F. Davis
2016-01-26 14:03   ` Lee Jones [this message]
2016-01-26 14:03     ` Lee Jones
2016-01-26 14:38     ` Andrew F. Davis
2016-01-26 14:38       ` Andrew F. Davis
     [not found]       ` <56A784CC.4090902-l0cyMroinI0@public.gmane.org>
2016-01-27  7:29         ` Lee Jones
2016-01-27  7:29           ` Lee Jones
2016-02-05 14:43   ` Linus Walleij
2016-02-06 16:11     ` Andrew F. Davis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160126140312.GB3368@x1 \
    --to=lee.jones@linaro.org \
    --cc=afd@ti.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=gnurou@gmail.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.