[Qemu-devel] [Bug 1539940] [NEW] Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu

[Qemu-devel] [Bug 1539940] [NEW] Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu

[Zhen Ning Lim]

Public bug reported:

Qemu command:
qemu-system-sparc -nographic -monitor null -serial mon:telnet:localhost:3000,server -bios ../../Downloads/ss20_v2.25_rom -M SS-20 -hda ./solsparc -m 512 -cdrom ./sol-9-905hw-ga-sparc-dvd.iso -boot d -cpu "TI SuperSparc 60" -net nic,vlan=1,macaddr=52:54:0:12:34:56


when i do disk2:d, the system loads until the terminal type menu.

What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool
8) Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) CDE Terminal Emulator (dtterm)
14) Other
Type the number of your choice and press Return: 3
syslog service starting.
savecore: no dump device configured
Running in command line mode

And nothing happens after that. Anyone encountered this issue?

** Affects: qemu
     Importance: Undecided
         Status: New

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1539940

Title:
  Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu

Status in QEMU:
  New

Bug description:
  Qemu command:
  qemu-system-sparc -nographic -monitor null -serial mon:telnet:localhost:3000,server -bios ../../Downloads/ss20_v2.25_rom -M SS-20 -hda ./solsparc -m 512 -cdrom ./sol-9-905hw-ga-sparc-dvd.iso -boot d -cpu "TI SuperSparc 60" -net nic,vlan=1,macaddr=52:54:0:12:34:56

  
  when i do disk2:d, the system loads until the terminal type menu.

  What type of terminal are you using?
  1) ANSI Standard CRT
  2) DEC VT52
  3) DEC VT100
  4) Heathkit 19
  5) Lear Siegler ADM31
  6) PC Console
  7) Sun Command Tool
  8) Sun Workstation
  9) Televideo 910
  10) Televideo 925
  11) Wyse Model 50
  12) X Terminal Emulator (xterms)
  13) CDE Terminal Emulator (dtterm)
  14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode

  And nothing happens after that. Anyone encountered this issue?

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1539940/+subscriptions

Re: [Qemu-devel] [Bug 1539940] [NEW] Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu

[Artyom Tarasenko]

On Sat, Jan 30, 2016 at 5:41 PM, Zhen Ning Lim <limzn88@gmail.com> wrote:
> Public bug reported:
>
> Qemu command:
> qemu-system-sparc -nographic -monitor null -serial mon:telnet:localhost:3000,server -bios ../../Downloads/ss20_v2.25_rom -M SS-20 -hda ./solsparc -m 512 -cdrom ./sol-9-905hw-ga-sparc-dvd.iso -boot d -cpu "TI SuperSparc 60" -net nic,vlan=1,macaddr=52:54:0:12:34:56
>
>
> when i do disk2:d, the system loads until the terminal type menu.
>
> What type of terminal are you using?
> 1) ANSI Standard CRT
> 2) DEC VT52
> 3) DEC VT100
> 4) Heathkit 19
> 5) Lear Siegler ADM31
> 6) PC Console
> 7) Sun Command Tool
> 8) Sun Workstation
> 9) Televideo 910
> 10) Televideo 925
> 11) Wyse Model 50
> 12) X Terminal Emulator (xterms)
> 13) CDE Terminal Emulator (dtterm)
> 14) Other
> Type the number of your choice and press Return: 3
> syslog service starting.
> savecore: no dump device configured
> Running in command line mode
>
> And nothing happens after that. Anyone encountered this issue?
>
> ** Affects: qemu
>      Importance: Undecided
>          Status: New
>
> --
> You received this bug notification because you are a member of qemu-
> devel-ml, which is subscribed to QEMU.
> https://bugs.launchpad.net/bugs/1539940
>
> Title:
>   Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu
>
> Status in QEMU:
>   New
>
> Bug description:
>   Qemu command:
>   qemu-system-sparc -nographic -monitor null -serial mon:telnet:localhost:3000,server -bios ../../Downloads/ss20_v2.25_rom -M SS-20 -hda ./solsparc -m 512 -cdrom ./sol-9-905hw-ga-sparc-dvd.iso -boot d -cpu "TI SuperSparc 60" -net nic,vlan=1,macaddr=52:54:0:12:34:56
>
>
>   when i do disk2:d, the system loads until the terminal type menu.
>
>   What type of terminal are you using?
>   1) ANSI Standard CRT
>   2) DEC VT52
>   3) DEC VT100
>   4) Heathkit 19
>   5) Lear Siegler ADM31
>   6) PC Console
>   7) Sun Command Tool
>   8) Sun Workstation
>   9) Televideo 910
>   10) Televideo 925
>   11) Wyse Model 50
>   12) X Terminal Emulator (xterms)
>   13) CDE Terminal Emulator (dtterm)
>   14) Other
>   Type the number of your choice and press Return: 3
>   syslog service starting.
>   savecore: no dump device configured
>   Running in command line mode
>
>   And nothing happens after that. Anyone encountered this issue?

Does the boot log look like the "good" or the "bad" example from the link below?

http://tyom.blogspot.de/2010/05/sx-framebuffer-emulation.html


-- 
Regards,
Artyom Tarasenko

SPARC and PPC PReP under qemu blog: http://tyom.blogspot.com/search/label/qemu

[Qemu-devel] [Bug 1539940] Re: Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu

[Zhen Ning Lim]

Looks bad before i did setenv sbus-probe-list f

Probing Memory Bank #7 64 Megabytes of DRAM
Incorrect configuration checksum; 
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Probing /iommu@f,e0000000/sbus@f,e0001000 at f,0  espdma esp sd st ledma le SUNW,bpp 
Probing /iommu@f,e0000000/sbus@f,e0001000 at e,0  
Probing /iommu@f,e0000000/sbus@f,e0001000 at 0,0  Nothing there
Probing /iommu@f,e0000000/sbus@f,e0001000 at 1,0  Nothing there
Probing /iommu@f,e0000000/sbus@f,e0001000 at 2,0  Nothing there
Probing /iommu@f,e0000000/sbus@f,e0001000 at 3,0  Nothing there

after:

Probing Memory Bank #7 64 Megabytes of DRAM
Probing /iommu@f,e0000000/sbus@f,e0001000 at f,0  espdma esp sd st ledma le SUNW,bpp 

SPARCstation 20 (1 X 390Z50), No Keyboard
ROM Rev. 2.25, 512 MB memory installed, Serial #0.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1539940

Title:
  Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu

Status in QEMU:
  New

Bug description:
  Qemu command:
  qemu-system-sparc -nographic -monitor null -serial mon:telnet:localhost:3000,server -bios ../../Downloads/ss20_v2.25_rom -M SS-20 -hda ./solsparc -m 512 -cdrom ./sol-9-905hw-ga-sparc-dvd.iso -boot d -cpu "TI SuperSparc 60" -net nic,vlan=1,macaddr=52:54:0:12:34:56

  
  when i do disk2:d, the system loads until the terminal type menu.

  What type of terminal are you using?
  1) ANSI Standard CRT
  2) DEC VT52
  3) DEC VT100
  4) Heathkit 19
  5) Lear Siegler ADM31
  6) PC Console
  7) Sun Command Tool
  8) Sun Workstation
  9) Televideo 910
  10) Televideo 925
  11) Wyse Model 50
  12) X Terminal Emulator (xterms)
  13) CDE Terminal Emulator (dtterm)
  14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode

  And nothing happens after that. Anyone encountered this issue?

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1539940/+subscriptions

[Qemu-devel] [Bug 1539940] Re: Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu

[mike]

This is no longer a problem (for sure in latest git, probably further
back than that, as I installed Solaris 9/SPARC on SS-20 a few months
ago):

Type the number of your choice and press Return: 3
syslog service starting.
savecore: no dump device configured
Running in command line mode

Please wait while the system information is loaded... /



Welcome to the Web Start Solaris Command Line installation!

The following questions will gather information about this system.
This information will be used to configure:

	Network
	Kerberos Security
	Name Service
	Date and Time
	Root Password
	Power Management

   <Press Return to continue>


This can be resolved.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1539940

Title:
  Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu

Status in QEMU:
  New

Bug description:
  Qemu command:
  qemu-system-sparc -nographic -monitor null -serial mon:telnet:localhost:3000,server -bios ../../Downloads/ss20_v2.25_rom -M SS-20 -hda ./solsparc -m 512 -cdrom ./sol-9-905hw-ga-sparc-dvd.iso -boot d -cpu "TI SuperSparc 60" -net nic,vlan=1,macaddr=52:54:0:12:34:56

  
  when i do disk2:d, the system loads until the terminal type menu.

  What type of terminal are you using?
  1) ANSI Standard CRT
  2) DEC VT52
  3) DEC VT100
  4) Heathkit 19
  5) Lear Siegler ADM31
  6) PC Console
  7) Sun Command Tool
  8) Sun Workstation
  9) Televideo 910
  10) Televideo 925
  11) Wyse Model 50
  12) X Terminal Emulator (xterms)
  13) CDE Terminal Emulator (dtterm)
  14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode

  And nothing happens after that. Anyone encountered this issue?

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1539940/+subscriptions

[Qemu-devel] [Bug 1539940] Re: Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu

[Zhen Ning Lim]

** Changed in: qemu
       Status: New => Fix Released

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1539940

Title:
  Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu

Status in QEMU:
  Fix Released

Bug description:
  Qemu command:
  qemu-system-sparc -nographic -monitor null -serial mon:telnet:localhost:3000,server -bios ../../Downloads/ss20_v2.25_rom -M SS-20 -hda ./solsparc -m 512 -cdrom ./sol-9-905hw-ga-sparc-dvd.iso -boot d -cpu "TI SuperSparc 60" -net nic,vlan=1,macaddr=52:54:0:12:34:56

  
  when i do disk2:d, the system loads until the terminal type menu.

  What type of terminal are you using?
  1) ANSI Standard CRT
  2) DEC VT52
  3) DEC VT100
  4) Heathkit 19
  5) Lear Siegler ADM31
  6) PC Console
  7) Sun Command Tool
  8) Sun Workstation
  9) Televideo 910
  10) Televideo 925
  11) Wyse Model 50
  12) X Terminal Emulator (xterms)
  13) CDE Terminal Emulator (dtterm)
  14) Other
  Type the number of your choice and press Return: 3
  syslog service starting.
  savecore: no dump device configured
  Running in command line mode

  And nothing happens after that. Anyone encountered this issue?

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1539940/+subscriptions