* [U-Boot] do i have any chance of booting a vxworks 5.5.2 image with u-boot? @ 2016-02-01 22:20 Robert P. J. Day 2016-02-02 17:36 ` Tom Rini 0 siblings, 1 reply; 4+ messages in thread From: Robert P. J. Day @ 2016-02-01 22:20 UTC (permalink / raw) To: u-boot i know u-boot has a "bootvx" command for booting vxworks images, but from what i read here: http://stackoverflow.com/questions/24114948/vxworks-portingdm8168 it's only vxworks 7 that supports u-boot as its bootloader. i know precious little about vxworks, i was just handed a version 5.5.2 image and asked whether it was possible for u-boot to boot it. do i have any chance whatsoever? any guidance would be useful. rday ^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] do i have any chance of booting a vxworks 5.5.2 image with u-boot? 2016-02-01 22:20 [U-Boot] do i have any chance of booting a vxworks 5.5.2 image with u-boot? Robert P. J. Day @ 2016-02-02 17:36 ` Tom Rini 2016-02-03 11:16 ` Robert P. J. Day 0 siblings, 1 reply; 4+ messages in thread From: Tom Rini @ 2016-02-02 17:36 UTC (permalink / raw) To: u-boot On Mon, Feb 01, 2016 at 05:20:16PM -0500, Robert P. J. Day wrote: > i know u-boot has a "bootvx" command for booting vxworks images, > but from what i read here: > > http://stackoverflow.com/questions/24114948/vxworks-portingdm8168 > > it's only vxworks 7 that supports u-boot as its bootloader. i know > precious little about vxworks, i was just handed a version 5.5.2 > image and asked whether it was possible for u-boot to boot it. > > do i have any chance whatsoever? any guidance would be useful. Well, I think there's two parts to this answer. The first is that (on PowerPC), VxWorks has been supported for practically forever. The second is that as the answers there say, you may have to deal with and fix some disagreements about what software (U-Boot or VxWorks) did or did not do what initalization. You may also, frankly, want to start out with a U-Boot of that vintage, see if that works, and if so (and it'd be great to see results and patches if needed) if things still work in mainline today. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160202/50b95b69/attachment.sig> ^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] do i have any chance of booting a vxworks 5.5.2 image with u-boot? 2016-02-02 17:36 ` Tom Rini @ 2016-02-03 11:16 ` Robert P. J. Day 2016-02-04 11:43 ` Hannes Schmelzer 0 siblings, 1 reply; 4+ messages in thread From: Robert P. J. Day @ 2016-02-03 11:16 UTC (permalink / raw) To: u-boot Quoting Tom Rini <trini@konsulko.com>: > On Mon, Feb 01, 2016 at 05:20:16PM -0500, Robert P. J. Day wrote: > >> i know u-boot has a "bootvx" command for booting vxworks images, >> but from what i read here: >> >> http://stackoverflow.com/questions/24114948/vxworks-portingdm8168 >> >> it's only vxworks 7 that supports u-boot as its bootloader. i know >> precious little about vxworks, i was just handed a version 5.5.2 >> image and asked whether it was possible for u-boot to boot it. >> >> do i have any chance whatsoever? any guidance would be useful. > > Well, I think there's two parts to this answer. The first is that (on > PowerPC), VxWorks has been supported for practically forever. The > second is that as the answers there say, you may have to deal with and > fix some disagreements about what software (U-Boot or VxWorks) did or > did not do what initalization. You may also, frankly, want to start out > with a U-Boot of that vintage, see if that works, and if so (and it'd be > great to see results and patches if needed) if things still work in > mainline today. i'm certainly willing to put in the time to do this -- i have the hardware and the appropriate build environment so give me a day or two to finish something, and i can pretty much concentrate on this and submit any patches that eventually get this to work. rday ^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] do i have any chance of booting a vxworks 5.5.2 image with u-boot? 2016-02-03 11:16 ` Robert P. J. Day @ 2016-02-04 11:43 ` Hannes Schmelzer 0 siblings, 0 replies; 4+ messages in thread From: Hannes Schmelzer @ 2016-02-04 11:43 UTC (permalink / raw) To: u-boot On 02/03/2016 12:16 PM, Robert P. J. Day wrote: > Quoting Tom Rini <trini@konsulko.com>: > >> On Mon, Feb 01, 2016 at 05:20:16PM -0500, Robert P. J. Day wrote: >> >>> i know u-boot has a "bootvx" command for booting vxworks images, >>> but from what i read here: >>> >>> http://stackoverflow.com/questions/24114948/vxworks-portingdm8168 >>> >>> it's only vxworks 7 that supports u-boot as its bootloader. i know >>> precious little about vxworks, i was just handed a version 5.5.2 >>> image and asked whether it was possible for u-boot to boot it. >>> >>> do i have any chance whatsoever? any guidance would be useful. >> >> Well, I think there's two parts to this answer. The first is that (on >> PowerPC), VxWorks has been supported for practically forever. The >> second is that as the answers there say, you may have to deal with and >> fix some disagreements about what software (U-Boot or VxWorks) did or >> did not do what initalization. You may also, frankly, want to start out >> with a U-Boot of that vintage, see if that works, and if so (and it'd be >> great to see results and patches if needed) if things still work in >> mainline today. > > i'm certainly willing to put in the time to do this -- i have the > hardware and the appropriate build environment so give me a day or two > to finish something, and i can pretty much concentrate on this and > submit any patches that eventually get this to work. > > rday Hi Robert, Tom, bootvx also boots some vxWorks 6.9.x in my case. Before i've used the bootvx command i simply fired the vxworks image with go <loadaddr> The kernel-configuration of the vxworks Image has a define called RUNTIME_LOW_ADDRS, load your image to this address and give a go on this address. your vxWorks kernel should boot. I've stripped the vxWorks build output with "objcopyarm -O binary --binary-without-bss" You don't have a bootline initialization at this time. If you want some initalization of it, the bootvx command is the right way. Have a look to the B&R kwb board in uboot (kwb.h) Feel free to ask if something doesn't work. best regards, Hannes ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-02-04 11:43 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-02-01 22:20 [U-Boot] do i have any chance of booting a vxworks 5.5.2 image with u-boot? Robert P. J. Day 2016-02-02 17:36 ` Tom Rini 2016-02-03 11:16 ` Robert P. J. Day 2016-02-04 11:43 ` Hannes Schmelzer
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.