From: Shawn Guo <shawnguo@kernel.org>
To: "Lothar Waßmann" <LW@KARO-electronics.de>
Cc: Dan Williams <dan.j.williams@intel.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Mark Rutland <mark.rutland@arm.com>,
Pawel Moll <pawel.moll@arm.com>, Rob Herring <robh+dt@kernel.org>,
Russell King <linux@arm.linux.org.uk>,
Sascha Hauer <kernel@pengutronix.de>,
Vinod Koul <vinod.koul@intel.com>,
devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/6] ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node
Date: Tue, 2 Feb 2016 14:31:47 +0800 [thread overview]
Message-ID: <20160202063147.GF8307@tiger> (raw)
In-Reply-To: <1453294626-17608-4-git-send-email-LW@KARO-electronics.de>
On Wed, Jan 20, 2016 at 01:57:03PM +0100, Lothar Waßmann wrote:
> ENET_OUT is used as reference clock for the ethernet PHY on the Ka-Ro
> TX6 modules. Specify this clock in DTB to let it be managed correctly
> by the driver.
>
> Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Applied, thanks.
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: "Lothar Waßmann" <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
Cc: Dan Williams
<dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 3/6] ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node
Date: Tue, 2 Feb 2016 14:31:47 +0800 [thread overview]
Message-ID: <20160202063147.GF8307@tiger> (raw)
In-Reply-To: <1453294626-17608-4-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
On Wed, Jan 20, 2016 at 01:57:03PM +0100, Lothar Waßmann wrote:
> ENET_OUT is used as reference clock for the ethernet PHY on the Ka-Ro
> TX6 modules. Specify this clock in DTB to let it be managed correctly
> by the driver.
>
> Signed-off-by: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/6] ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node
Date: Tue, 2 Feb 2016 14:31:47 +0800 [thread overview]
Message-ID: <20160202063147.GF8307@tiger> (raw)
In-Reply-To: <1453294626-17608-4-git-send-email-LW@KARO-electronics.de>
On Wed, Jan 20, 2016 at 01:57:03PM +0100, Lothar Wa?mann wrote:
> ENET_OUT is used as reference clock for the ethernet PHY on the Ka-Ro
> TX6 modules. Specify this clock in DTB to let it be managed correctly
> by the driver.
>
> Signed-off-by: Lothar Wa?mann <LW@KARO-electronics.de>
Applied, thanks.
next prev parent reply other threads:[~2016-02-02 6:32 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-20 12:57 [PATCH 0/6] ARM: dts: update Ka-Ro i.MX6 module support Lothar Waßmann
2016-01-20 12:57 ` Lothar Waßmann
2016-01-20 12:57 ` Lothar Waßmann
2016-01-20 12:57 ` [PATCH 1/6] dma: enable mxs-dma for imx6ul Lothar Waßmann
2016-01-20 12:57 ` Lothar Waßmann
2016-01-20 12:57 ` Lothar Waßmann
2016-01-25 12:10 ` Vinod Koul
2016-01-25 12:10 ` Vinod Koul
2016-02-02 6:23 ` Shawn Guo
2016-02-02 6:23 ` Shawn Guo
2016-02-08 3:14 ` Vinod Koul
2016-02-08 3:14 ` Vinod Koul
2016-02-08 3:14 ` Vinod Koul
2016-02-11 13:19 ` [PATCHv2 1/1] dmaengine: " Lothar Waßmann
2016-02-22 2:54 ` Vinod Koul
2016-01-20 12:57 ` [PATCH 2/6] ARM: dts: imx6: use correct mclk frequency for audio codec Lothar Waßmann
2016-01-20 12:57 ` Lothar Waßmann
2016-02-02 6:31 ` Shawn Guo
2016-02-02 6:31 ` Shawn Guo
2016-01-20 12:57 ` [PATCH 3/6] ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node Lothar Waßmann
2016-01-20 12:57 ` Lothar Waßmann
2016-02-02 6:31 ` Shawn Guo [this message]
2016-02-02 6:31 ` Shawn Guo
2016-02-02 6:31 ` Shawn Guo
2016-01-20 12:57 ` [PATCH 4/6] ARM: dts: imx6: change TX6 module names due to new HW revision Lothar Waßmann
2016-01-20 12:57 ` Lothar Waßmann
2016-02-02 6:36 ` Shawn Guo
2016-02-02 6:36 ` Shawn Guo
2016-01-20 12:57 ` [PATCH 5/6] ARM: dts: imx6: add support for more Ka-Ro electronics modules Lothar Waßmann
2016-01-20 12:57 ` Lothar Waßmann
2016-01-20 12:57 ` Lothar Waßmann
2016-01-20 12:57 ` [PATCH 6/6] ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard Lothar Waßmann
2016-01-20 12:57 ` Lothar Waßmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160202063147.GF8307@tiger \
--to=shawnguo@kernel.org \
--cc=LW@KARO-electronics.de \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.