* [U-Boot] [PATCH 0/5] s3c24xx serial driver cleanup patches
@ 2016-02-06 6:57 David Müller
2016-02-06 6:57 ` [U-Boot] [PATCH 1/5] Remove unused CONFIG_MODEM_SUPPORT option and associated dead code David Müller
` (4 more replies)
0 siblings, 5 replies; 11+ messages in thread
From: David Müller @ 2016-02-06 6:57 UTC (permalink / raw)
To: u-boot
This is a serie of cleanup patches:
Patch 1-3 remove 3 unused config options and the related dead code from
several drivers and U-Boot main code.
Patch 4 removes any reference for the 3 unused config options from the
documentation.
Patch 5 removes another piece of dead, unreferenced code from the
s3c24xx serial driver.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 1/5] Remove unused CONFIG_MODEM_SUPPORT option and associated dead code.
2016-02-06 6:57 [U-Boot] [PATCH 0/5] s3c24xx serial driver cleanup patches David Müller
@ 2016-02-06 6:57 ` David Müller
2016-02-08 20:50 ` [U-Boot] [U-Boot, " Tom Rini
2016-02-06 6:57 ` [U-Boot] [PATCH 2/5] Remove unused CONFIG_CMD_HWFLOW " David Müller
` (3 subsequent siblings)
4 siblings, 1 reply; 11+ messages in thread
From: David Müller @ 2016-02-06 6:57 UTC (permalink / raw)
To: u-boot
Signed-off-by: David M?ller <d.mueller@elsoft.ch>
---
arch/powerpc/cpu/mpc8xx/serial.c | 22 ---------
common/Makefile | 1 -
common/board_f.c | 3 --
common/main.c | 14 ------
common/modem.c | 100 --------------------------------------
drivers/serial/serial_s3c24x0.c | 18 -------
include/asm-generic/global_data.h | 4 --
7 files changed, 162 deletions(-)
delete mode 100644 common/modem.c
diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c
index af65c96..94c785f 100644
--- a/arch/powerpc/cpu/mpc8xx/serial.c
+++ b/arch/powerpc/cpu/mpc8xx/serial.c
@@ -268,11 +268,6 @@ smc_putc(const char c)
volatile cpm8xx_t *cpmp = &(im->im_cpm);
volatile serialbuffer_t *rtx;
-#ifdef CONFIG_MODEM_SUPPORT
- if (gd->be_quiet)
- return;
-#endif
-
if (c == '\n')
smc_putc ('\r');
@@ -527,11 +522,6 @@ scc_putc(const char c)
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile cpm8xx_t *cpmp = &(im->im_cpm);
-#ifdef CONFIG_MODEM_SUPPORT
- if (gd->be_quiet)
- return;
-#endif
-
if (c == '\n')
scc_putc ('\r');
@@ -637,18 +627,6 @@ void mpc8xx_serial_initialize(void)
#endif
}
-#ifdef CONFIG_MODEM_SUPPORT
-void disable_putc(void)
-{
- gd->be_quiet = 1;
-}
-
-void enable_putc(void)
-{
- gd->be_quiet = 0;
-}
-#endif
-
#if defined(CONFIG_CMD_KGDB)
void
diff --git a/common/Makefile b/common/Makefile
index 5998411..117178a 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -82,7 +82,6 @@ obj-$(CONFIG_LCD_ROTATION) += lcd_console_rotation.o
obj-$(CONFIG_LCD_DT_SIMPLEFB) += lcd_simplefb.o
obj-$(CONFIG_LYNXKDI) += lynxkdi.o
obj-$(CONFIG_MENU) += menu.o
-obj-$(CONFIG_MODEM_SUPPORT) += modem.o
obj-$(CONFIG_UPDATE_TFTP) += update.o
obj-$(CONFIG_DFU_TFTP) += update.o
obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
diff --git a/common/board_f.c b/common/board_f.c
index c470b59..a960144 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -162,9 +162,6 @@ static int display_text_info(void)
text_base, bss_start, bss_end);
#endif
-#ifdef CONFIG_MODEM_SUPPORT
- debug("Modem Support enabled\n");
-#endif
#ifdef CONFIG_USE_IRQ
debug("IRQ Stack: %08lx\n", IRQ_STACK_START);
debug("FIQ Stack: %08lx\n", FIQ_STACK_START);
diff --git a/common/main.c b/common/main.c
index 5a03181..1a2ef39 100644
--- a/common/main.c
+++ b/common/main.c
@@ -20,19 +20,6 @@ DECLARE_GLOBAL_DATA_PTR;
*/
__weak void show_boot_progress(int val) {}
-static void modem_init(void)
-{
-#ifdef CONFIG_MODEM_SUPPORT
- debug("DEBUG: main_loop: gd->do_mdm_init=%lu\n", gd->do_mdm_init);
- if (gd->do_mdm_init) {
- char *str = getenv("mdm_cmd");
-
- setenv("preboot", str); /* set or delete definition */
- mdm_init(); /* wait for modem connection */
- }
-#endif /* CONFIG_MODEM_SUPPORT */
-}
-
static void run_preboot_environment_command(void)
{
#ifdef CONFIG_PREBOOT
@@ -66,7 +53,6 @@ void main_loop(void)
puts("upgraded by the late 2014 may break or be removed.\n");
#endif
- modem_init();
#ifdef CONFIG_VERSION_VARIABLE
setenv("ver", version_string); /* set version variable */
#endif /* CONFIG_VERSION_VARIABLE */
diff --git a/common/modem.c b/common/modem.c
deleted file mode 100644
index 96b1064..0000000
--- a/common/modem.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * (C) Copyright 2002-2009
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-/* 'inline' - We have to do it fast */
-static inline void mdm_readline(char *buf, int bufsiz)
-{
- char c;
- char *p;
- int n;
-
- n = 0;
- p = buf;
- for(;;) {
- c = serial_getc();
-
- debug("(%c)", c);
-
- switch(c) {
- case '\r':
- break;
- case '\n':
- *p = '\0';
- return;
-
- default:
- if(n++ > bufsiz) {
- *p = '\0';
- return; /* sanity check */
- }
- *p = c;
- p++;
- break;
- }
- }
-}
-
-int mdm_init (void)
-{
- char env_str[16];
- char *init_str;
- int i;
- extern void enable_putc(void);
- extern int hwflow_onoff(int);
-
- enable_putc(); /* enable serial_putc() */
-
-#ifdef CONFIG_HWFLOW
- init_str = getenv("mdm_flow_control");
- if (init_str && (strcmp(init_str, "rts/cts") == 0))
- hwflow_onoff (1);
- else
- hwflow_onoff(-1);
-#endif
-
- for (i = 1;;i++) {
- sprintf(env_str, "mdm_init%d", i);
- if ((init_str = getenv(env_str)) != NULL) {
- serial_puts(init_str);
- serial_puts("\n");
- for(;;) {
- mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
- debug("ini%d: [%s]", i, console_buffer);
-
- if ((strcmp(console_buffer, "OK") == 0) ||
- (strcmp(console_buffer, "ERROR") == 0)) {
- debug("ini%d: cmd done", i);
- break;
- } else /* in case we are originating call ... */
- if (strncmp(console_buffer, "CONNECT", 7) == 0) {
- debug("ini%d: connect", i);
- return 0;
- }
- }
- } else
- break; /* no init string - stop modem init */
-
- udelay(100000);
- }
-
- udelay(100000);
-
- /* final stage - wait for connect */
- for(;i > 1;) { /* if 'i' > 1 - wait for connection
- message from modem */
- mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
- debug("ini_f: [%s]", console_buffer);
- if (strncmp(console_buffer, "CONNECT", 7) == 0) {
- debug("ini_f: connected");
- return 0;
- }
- }
-
- return 0;
-}
diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c
index 7afc504..4cc94d9 100644
--- a/drivers/serial/serial_s3c24x0.c
+++ b/drivers/serial/serial_s3c24x0.c
@@ -164,30 +164,12 @@ int hwflow_onoff(int on)
}
#endif
-#ifdef CONFIG_MODEM_SUPPORT
-static int be_quiet = 0;
-void disable_putc(void)
-{
- be_quiet = 1;
-}
-
-void enable_putc(void)
-{
- be_quiet = 0;
-}
-#endif
-
-
/*
* Output a single byte to the serial port.
*/
static void _serial_putc(const char c, const int dev_index)
{
struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
-#ifdef CONFIG_MODEM_SUPPORT
- if (be_quiet)
- return;
-#endif
while (!(readl(&uart->utrstat) & 0x2))
/* wait for room in the tx FIFO */ ;
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index a587d3c..f2810a1 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -48,10 +48,6 @@ typedef struct global_data {
#ifdef CONFIG_PRE_CONSOLE_BUFFER
unsigned long precon_buf_idx; /* Pre-Console buffer index */
#endif
-#ifdef CONFIG_MODEM_SUPPORT
- unsigned long do_mdm_init;
- unsigned long be_quiet;
-#endif
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
--
1.8.4
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 2/5] Remove unused CONFIG_CMD_HWFLOW option and associated dead code.
2016-02-06 6:57 [U-Boot] [PATCH 0/5] s3c24xx serial driver cleanup patches David Müller
2016-02-06 6:57 ` [U-Boot] [PATCH 1/5] Remove unused CONFIG_MODEM_SUPPORT option and associated dead code David Müller
@ 2016-02-06 6:57 ` David Müller
2016-02-08 20:50 ` [U-Boot] [U-Boot, " Tom Rini
2016-02-06 6:57 ` [U-Boot] [PATCH 3/5] Remove unused CONFIG_HWFLOW " David Müller
` (2 subsequent siblings)
4 siblings, 1 reply; 11+ messages in thread
From: David Müller @ 2016-02-06 6:57 UTC (permalink / raw)
To: u-boot
Signed-off-by: David M?ller <d.mueller@elsoft.ch>
---
cmd/load.c | 30 ------------------------------
include/config_cmd_all.h | 1 -
2 files changed, 31 deletions(-)
diff --git a/cmd/load.c b/cmd/load.c
index 0aa7937..65557e4 100644
--- a/cmd/load.c
+++ b/cmd/load.c
@@ -1081,33 +1081,3 @@ U_BOOT_CMD(
);
#endif /* CONFIG_CMD_LOADB */
-
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CMD_HWFLOW)
-int do_hwflow(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- extern int hwflow_onoff(int);
-
- if (argc == 2) {
- if (strcmp(argv[1], "off") == 0)
- hwflow_onoff(-1);
- else
- if (strcmp(argv[1], "on") == 0)
- hwflow_onoff(1);
- else
- return CMD_RET_USAGE;
- }
- printf("RTS/CTS hardware flow control: %s\n", hwflow_onoff(0) ? "on" : "off");
- return 0;
-}
-
-/* -------------------------------------------------------------------- */
-
-U_BOOT_CMD(
- hwflow, 2, 0, do_hwflow,
- "turn RTS/CTS hardware flow control in serial line on/off",
- "[on|off]"
-);
-
-#endif /* CONFIG_CMD_HWFLOW */
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index 424721b..e858e55 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -34,7 +34,6 @@
#define CONFIG_CMD_FUSE /* Device fuse support */
#define CONFIG_CMD_GETTIME /* Get time since boot */
#define CONFIG_CMD_HASH /* calculate hash / digest */
-#define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_IDE /* IDE harddisk support */
#define CONFIG_CMD_IMMAP /* IMMR dump support */
--
1.8.4
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 3/5] Remove unused CONFIG_HWFLOW option and associated dead code.
2016-02-06 6:57 [U-Boot] [PATCH 0/5] s3c24xx serial driver cleanup patches David Müller
2016-02-06 6:57 ` [U-Boot] [PATCH 1/5] Remove unused CONFIG_MODEM_SUPPORT option and associated dead code David Müller
2016-02-06 6:57 ` [U-Boot] [PATCH 2/5] Remove unused CONFIG_CMD_HWFLOW " David Müller
@ 2016-02-06 6:57 ` David Müller
2016-02-08 20:50 ` [U-Boot] [U-Boot, " Tom Rini
2016-02-06 6:57 ` [U-Boot] [PATCH 4/5] doc: Remove any reference to CONFIG_MODEM_SUPPORT, CONFIG_CMD_HWFLOW, CONFIG_HWFLOW and friends from the documentation David Müller
2016-02-06 6:57 ` [U-Boot] [PATCH 5/5] s3c24xx: serial: Remove dead code David Müller
4 siblings, 1 reply; 11+ messages in thread
From: David Müller @ 2016-02-06 6:57 UTC (permalink / raw)
To: u-boot
Signed-off-by: David M?ller <d.mueller@elsoft.ch>
---
drivers/serial/serial_imx.c | 7 -------
drivers/serial/serial_s3c24x0.c | 35 -----------------------------------
2 files changed, 42 deletions(-)
diff --git a/drivers/serial/serial_imx.c b/drivers/serial/serial_imx.c
index d43a5fe..8d9166b 100644
--- a/drivers/serial/serial_imx.c
+++ b/drivers/serial/serial_imx.c
@@ -164,13 +164,6 @@ static int imx_serial_getc(void)
return ch;
}
-#ifdef CONFIG_HWFLOW
-static int hwflow = 0; /* turned off by default */
-int hwflow_onoff(int on)
-{
-}
-#endif
-
/*
* Output a single byte to the serial port.
*/
diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c
index 4cc94d9..fb895fd 100644
--- a/drivers/serial/serial_s3c24x0.c
+++ b/drivers/serial/serial_s3c24x0.c
@@ -65,10 +65,6 @@ DECLARE_GLOBAL_DATA_PTR;
.puts = s3serial##port##_puts, \
}
-#ifdef CONFIG_HWFLOW
-static int hwflow;
-#endif
-
static void _serial_setbrg(const int dev_index)
{
struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
@@ -95,10 +91,6 @@ static int serial_init_dev(const int dev_index)
{
struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index);
-#ifdef CONFIG_HWFLOW
- hwflow = 0; /* turned off by default */
-#endif
-
/* FIFO enable, Tx/Rx FIFO clear */
writel(0x07, &uart->ufcon);
writel(0x0, &uart->umcon);
@@ -111,10 +103,6 @@ static int serial_init_dev(const int dev_index)
*/
writel(0x245, &uart->ucon);
-#ifdef CONFIG_HWFLOW
- writel(0x1, &uart->umcon); /* rts up */
-#endif
-
/* FIXME: This is sooooooooooooooooooo ugly */
#if defined(CONFIG_ARCH_GTA02_v1) || defined(CONFIG_ARCH_GTA02_v2)
/* we need auto hw flow control on the gsm and gps port */
@@ -146,24 +134,6 @@ static inline int serial_getc_dev(unsigned int dev_index)
return _serial_getc(dev_index);
}
-#ifdef CONFIG_HWFLOW
-int hwflow_onoff(int on)
-{
- switch (on) {
- case 0:
- default:
- break; /* return current */
- case 1:
- hwflow = 1; /* turn on */
- break;
- case -1:
- hwflow = 0; /* turn off */
- break;
- }
- return hwflow;
-}
-#endif
-
/*
* Output a single byte to the serial port.
*/
@@ -174,11 +144,6 @@ static void _serial_putc(const char c, const int dev_index)
while (!(readl(&uart->utrstat) & 0x2))
/* wait for room in the tx FIFO */ ;
-#ifdef CONFIG_HWFLOW
- while (hwflow && !(readl(&uart->umstat) & 0x1))
- /* Wait for CTS up */ ;
-#endif
-
writeb(c, &uart->utxh);
/* If \n, also do \r */
--
1.8.4
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 4/5] doc: Remove any reference to CONFIG_MODEM_SUPPORT, CONFIG_CMD_HWFLOW, CONFIG_HWFLOW and friends from the documentation.
2016-02-06 6:57 [U-Boot] [PATCH 0/5] s3c24xx serial driver cleanup patches David Müller
` (2 preceding siblings ...)
2016-02-06 6:57 ` [U-Boot] [PATCH 3/5] Remove unused CONFIG_HWFLOW " David Müller
@ 2016-02-06 6:57 ` David Müller
2016-02-08 20:50 ` [U-Boot] [U-Boot, " Tom Rini
2016-02-06 6:57 ` [U-Boot] [PATCH 5/5] s3c24xx: serial: Remove dead code David Müller
4 siblings, 1 reply; 11+ messages in thread
From: David Müller @ 2016-02-06 6:57 UTC (permalink / raw)
To: u-boot
Signed-off-by: David M?ller <d.mueller@elsoft.ch>
---
README | 28 ----------------------
doc/README.Modem | 72 --------------------------------------------------------
2 files changed, 100 deletions(-)
delete mode 100644 doc/README.Modem
diff --git a/README b/README
index c7c9e0a..9a5be6c 100644
--- a/README
+++ b/README
@@ -1023,7 +1023,6 @@ The following options need to be configured:
CONFIG_CMD_GO * the 'go' command (exec code)
CONFIG_CMD_GREPENV * search environment
CONFIG_CMD_HASH * calculate hash / digest
- CONFIG_CMD_HWFLOW * RTS/CTS hw flow control
CONFIG_CMD_I2C * I2C serial bus support
CONFIG_CMD_IDE * IDE harddisk support
CONFIG_CMD_IMI iminfo
@@ -3712,17 +3711,6 @@ FIT uImage format:
CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL
payload without any padding, or >= CONFIG_SPL_MAX_SIZE.
-Modem Support:
---------------
-
-[so far only for SMDK2400 boards]
-
-- Modem support enable:
- CONFIG_MODEM_SUPPORT
-
-- RTS/CTS Flow control enable:
- CONFIG_HWFLOW
-
- Interrupt support (PPC):
There are common interrupt_init() and timer_interrupt()
@@ -3736,22 +3724,6 @@ Modem Support:
/ other_activity_monitor it works automatically from
general timer_interrupt().
-- General:
-
- In the target system modem support is enabled when a
- specific key (key combination) is pressed during
- power-on. Otherwise U-Boot will boot normally
- (autoboot). The key_pressed() function is called from
- board_init(). Currently key_pressed() is a dummy
- function, returning 1 and thus enabling modem
- initialization.
-
- If there are no modem init strings in the
- environment, U-Boot proceed to autoboot; the
- previous output (banner, info printfs) will be
- suppressed, though.
-
- See also: doc/README.Modem
Board initialization settings:
------------------------------
diff --git a/doc/README.Modem b/doc/README.Modem
deleted file mode 100644
index 1613c11..0000000
--- a/doc/README.Modem
+++ /dev/null
@@ -1,72 +0,0 @@
-How to configure modem support in U-Boot :
-
-1. Define modem initialization strings:
----------------------------------------
-
-The modem initialization strings have following format:
-
- mdm_init1=<AT-command>
- mdm_init2=<AT-command>
- ...
-
-Turning off modem verbose responses with ATV0 or ATQ1 is not allowed;
-U-Boot analyzes only verbose (not numeric) result codes. Modem local
-command echo can be turned off (ATE0).
-
-2. RTS/CTS hardware flow control:
----------------------------------
-
-You may wish to enable RTS/CTS hardware flow control, if the board's
-UART driver supports it (see CONFIG_HWFLOW compile-time flag in
-config/<board>.h). This is controlled by the 'mdm_flow_control'
-environment variable:
-
- 'mdm_flow_control=rts/cts' - to enable RTS/CTS flow control.
- 'mdm_flow_control=none ' - to disable.
-
-
-The following are the examples using a Rockwell OEM modem
-configuration:
-
-SAMSUNG # setenv mdm_init1 ATZ - reset the modem to
- the factory defaults.
-SAMSUNG # setenv mdm_init2 ATS0=1 - set modem into
- answer mode.
-SAMSUNG # setenv mdm_flow_control rts/cts - enable serial port
- flow control
-SAMSUNG # saveenv
-
-The example above initializes modem into answer mode to wait for the
-incoming call. RTS/CTS flow control is enabled for the serial port.
-(The RTS/CTS flow control is enabled by default on the modem).
-
-
-SAMSUNG # setenv mdm_init1 ATZ
-SAMSUNG # setenv mdm_init2 ATS39=0+IFC=0,0 - disable modem
- RTS/CTS flow control
-SAMSUNG # setenv mdm_init3 ATDT1643973 - dial out the number
-SAMSUNG # setenv mdm_flow_control none
-SAMSUNG # saveenv
-
-The example above initializes modem to dial-up connection on the
-number 1643973. Flow control is disabled.
-
-Note that flow control must be turned both off or both on for the
-board serial port and for the modem.
-
-
-If the connection was set up successfully, the U-Boot prompt appears
-on the terminal console. If not (U-Boot modem was configured for
-originating the call and connection was not established) - the board
-should be reset for another dial-up try.
-
-
-Note on the SMDK2400 board:
----------------------------
-
-Since the board serial ports does not have DTR signal wired, modem
-should be told to ignore port DTR setting prior to connection to the
-SMDK board, and this setting should be stored in modem NVRAM. For the
-Rockwell OEM modem this can to be done with the following command:
-
-AT&D0&W
--
1.8.4
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 5/5] s3c24xx: serial: Remove dead code
2016-02-06 6:57 [U-Boot] [PATCH 0/5] s3c24xx serial driver cleanup patches David Müller
` (3 preceding siblings ...)
2016-02-06 6:57 ` [U-Boot] [PATCH 4/5] doc: Remove any reference to CONFIG_MODEM_SUPPORT, CONFIG_CMD_HWFLOW, CONFIG_HWFLOW and friends from the documentation David Müller
@ 2016-02-06 6:57 ` David Müller
2016-02-08 20:51 ` [U-Boot] [U-Boot,5/5] " Tom Rini
4 siblings, 1 reply; 11+ messages in thread
From: David Müller @ 2016-02-06 6:57 UTC (permalink / raw)
To: u-boot
Signed-off-by: David M?ller <d.mueller@elsoft.ch>
---
drivers/serial/serial_s3c24x0.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c
index fb895fd..d4e7df2 100644
--- a/drivers/serial/serial_s3c24x0.c
+++ b/drivers/serial/serial_s3c24x0.c
@@ -103,12 +103,6 @@ static int serial_init_dev(const int dev_index)
*/
writel(0x245, &uart->ucon);
- /* FIXME: This is sooooooooooooooooooo ugly */
-#if defined(CONFIG_ARCH_GTA02_v1) || defined(CONFIG_ARCH_GTA02_v2)
- /* we need auto hw flow control on the gsm and gps port */
- if (dev_index == 0 || dev_index == 1)
- writel(0x10, &uart->umcon);
-#endif
_serial_setbrg(dev_index);
return (0);
--
1.8.4
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [U-Boot] [U-Boot, 1/5] Remove unused CONFIG_MODEM_SUPPORT option and associated dead code.
2016-02-06 6:57 ` [U-Boot] [PATCH 1/5] Remove unused CONFIG_MODEM_SUPPORT option and associated dead code David Müller
@ 2016-02-08 20:50 ` Tom Rini
0 siblings, 0 replies; 11+ messages in thread
From: Tom Rini @ 2016-02-08 20:50 UTC (permalink / raw)
To: u-boot
On Sat, Feb 06, 2016 at 07:57:25AM +0100, David M?ller (ELSOFT AG) wrote:
> Signed-off-by: David M?ller <d.mueller@elsoft.ch>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160208/2d87ff07/attachment.sig>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [U-Boot, 2/5] Remove unused CONFIG_CMD_HWFLOW option and associated dead code.
2016-02-06 6:57 ` [U-Boot] [PATCH 2/5] Remove unused CONFIG_CMD_HWFLOW " David Müller
@ 2016-02-08 20:50 ` Tom Rini
0 siblings, 0 replies; 11+ messages in thread
From: Tom Rini @ 2016-02-08 20:50 UTC (permalink / raw)
To: u-boot
On Sat, Feb 06, 2016 at 07:57:26AM +0100, David M?ller (ELSOFT AG) wrote:
> Signed-off-by: David M?ller <d.mueller@elsoft.ch>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160208/c1c07640/attachment.sig>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [U-Boot, 3/5] Remove unused CONFIG_HWFLOW option and associated dead code.
2016-02-06 6:57 ` [U-Boot] [PATCH 3/5] Remove unused CONFIG_HWFLOW " David Müller
@ 2016-02-08 20:50 ` Tom Rini
0 siblings, 0 replies; 11+ messages in thread
From: Tom Rini @ 2016-02-08 20:50 UTC (permalink / raw)
To: u-boot
On Sat, Feb 06, 2016 at 07:57:27AM +0100, David M?ller (ELSOFT AG) wrote:
> Signed-off-by: David M?ller <d.mueller@elsoft.ch>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160208/be695c75/attachment.sig>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [U-Boot, 4/5] doc: Remove any reference to CONFIG_MODEM_SUPPORT, CONFIG_CMD_HWFLOW, CONFIG_HWFLOW and friends from the documentation.
2016-02-06 6:57 ` [U-Boot] [PATCH 4/5] doc: Remove any reference to CONFIG_MODEM_SUPPORT, CONFIG_CMD_HWFLOW, CONFIG_HWFLOW and friends from the documentation David Müller
@ 2016-02-08 20:50 ` Tom Rini
0 siblings, 0 replies; 11+ messages in thread
From: Tom Rini @ 2016-02-08 20:50 UTC (permalink / raw)
To: u-boot
On Sat, Feb 06, 2016 at 07:57:28AM +0100, David M?ller (ELSOFT AG) wrote:
> Signed-off-by: David M?ller <d.mueller@elsoft.ch>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160208/542d8763/attachment.sig>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [U-Boot,5/5] s3c24xx: serial: Remove dead code
2016-02-06 6:57 ` [U-Boot] [PATCH 5/5] s3c24xx: serial: Remove dead code David Müller
@ 2016-02-08 20:51 ` Tom Rini
0 siblings, 0 replies; 11+ messages in thread
From: Tom Rini @ 2016-02-08 20:51 UTC (permalink / raw)
To: u-boot
On Sat, Feb 06, 2016 at 07:57:29AM +0100, David M?ller (ELSOFT AG) wrote:
> Signed-off-by: David M?ller <d.mueller@elsoft.ch>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160208/138dacf7/attachment.sig>
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2016-02-08 20:51 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-02-06 6:57 [U-Boot] [PATCH 0/5] s3c24xx serial driver cleanup patches David Müller
2016-02-06 6:57 ` [U-Boot] [PATCH 1/5] Remove unused CONFIG_MODEM_SUPPORT option and associated dead code David Müller
2016-02-08 20:50 ` [U-Boot] [U-Boot, " Tom Rini
2016-02-06 6:57 ` [U-Boot] [PATCH 2/5] Remove unused CONFIG_CMD_HWFLOW " David Müller
2016-02-08 20:50 ` [U-Boot] [U-Boot, " Tom Rini
2016-02-06 6:57 ` [U-Boot] [PATCH 3/5] Remove unused CONFIG_HWFLOW " David Müller
2016-02-08 20:50 ` [U-Boot] [U-Boot, " Tom Rini
2016-02-06 6:57 ` [U-Boot] [PATCH 4/5] doc: Remove any reference to CONFIG_MODEM_SUPPORT, CONFIG_CMD_HWFLOW, CONFIG_HWFLOW and friends from the documentation David Müller
2016-02-08 20:50 ` [U-Boot] [U-Boot, " Tom Rini
2016-02-06 6:57 ` [U-Boot] [PATCH 5/5] s3c24xx: serial: Remove dead code David Müller
2016-02-08 20:51 ` [U-Boot] [U-Boot,5/5] " Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.