From: "Ville Syrjälä" <ville.syrjala@linux.intel.com> To: "Sharma, Shashank" <shashank.sharma@intel.com> Cc: Nick Bowler <nbowler@draconx.ca>, "Jindal, Sonika" <sonika.jindal@intel.com>, Daniel Vetter <daniel.vetter@ffwll.ch>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, "dri-devel@lists.freedesktop.org" <dri-devel@lists.freedesktop.org> Subject: Re: PROBLEM: Intel HDMI output busticated on 4.4 (regression) Date: Tue, 9 Feb 2016 19:03:51 +0200 [thread overview] Message-ID: <20160209170351.GT23290@intel.com> (raw) In-Reply-To: <FF3DDC77922A8A4BB08A3BC48A1EA8CB0AEA6DE9@BGSMSX101.gar.corp.intel.com> On Tue, Feb 09, 2016 at 04:39:21PM +0000, Sharma, Shashank wrote: > Hi Nick, > > Sonika is OOO for this week. > AFAIK about this issue, looks like the live status is not getting set for your system, on HPD. > > As per the Bspec, we must check live status before trying to read EDID. > Is it possible for you to check with an HDMI analyzer and probe live status register ? BTW I'm not at all convinced about the current live status bit defines we have for g4x. Supposedly someone tested them and found that they don't match the spec, but IIRC when I tried them on one g4x machine here, they did match the spec (well, at least for the ports present on that particular board). So something like this may or may not help: diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 188ad5de020f..80c08016e522 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3302,9 +3302,9 @@ enum skl_disp_power_wells { * Please check the detailed lore in the commit message for for experimental * evidence. */ -#define PORTD_HOTPLUG_LIVE_STATUS_G4X (1 << 29) +#define PORTD_HOTPLUG_LIVE_STATUS_G4X (1 << 27) #define PORTC_HOTPLUG_LIVE_STATUS_G4X (1 << 28) -#define PORTB_HOTPLUG_LIVE_STATUS_G4X (1 << 27) +#define PORTB_HOTPLUG_LIVE_STATUS_G4X (1 << 29) /* VLV DP/HDMI bits again match Bspec */ #define PORTD_HOTPLUG_LIVE_STATUS_VLV (1 << 27) #define PORTC_HOTPLUG_LIVE_STATUS_VLV (1 << 28) -- 2.4.10 > > Regards > Shashank > -----Original Message----- > From: Nick Bowler [mailto:nbowler@draconx.ca] > Sent: Tuesday, February 09, 2016 10:03 PM > To: Jindal, Sonika > Cc: linux-kernel@vger.kernel.org; dri-devel@lists.freedesktop.org; Daniel Vetter; Sharma, Shashank > Subject: Re: PROBLEM: Intel HDMI output busticated on 4.4 (regression) > > On 1/28/16, Nick Bowler <nbowler@draconx.ca> wrote: > > On 2016-01-21, Nick Bowler <nbowler@draconx.ca> wrote: > >> On 2016-01-21, Jindal, Sonika <sonika.jindal@intel.com> wrote: > >>> On 1/21/2016 8:59 AM, Nick Bowler wrote: > >>>> On 1/20/16, Nick Bowler <nbowler@draconx.ca> wrote: > >>>>> On 2016-01-20, Jindal, Sonika <sonika.jindal@intel.com> wrote: > >> [...] > >>>>>> Does the same system works with any other monitor? > >>>>> I'll see if I can find another to try. > >>>> I tried another monitor, and the same problem occurs. > >>> Which make are these monitors? > >> > >> - LG Flatron W2253V > >> - Dell E228WFPc > >> > >>> Do you have any other system other than G45? > >> > >> Nothing else with Linux 4.4, unfortunately. > > > > Anything else you want me to try? > > > > This issue is still present in 4.5-rc1. > > Ping? > > HDMI is still broken on my system in 4.5-rc3. > > Cheers, > Nick > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel -- Ville Syrjälä Intel OTC
WARNING: multiple messages have this Message-ID (diff)
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com> To: "Sharma, Shashank" <shashank.sharma@intel.com> Cc: Nick Bowler <nbowler@draconx.ca>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, "dri-devel@lists.freedesktop.org" <dri-devel@lists.freedesktop.org>, Daniel Vetter <daniel.vetter@ffwll.ch> Subject: Re: PROBLEM: Intel HDMI output busticated on 4.4 (regression) Date: Tue, 9 Feb 2016 19:03:51 +0200 [thread overview] Message-ID: <20160209170351.GT23290@intel.com> (raw) In-Reply-To: <FF3DDC77922A8A4BB08A3BC48A1EA8CB0AEA6DE9@BGSMSX101.gar.corp.intel.com> On Tue, Feb 09, 2016 at 04:39:21PM +0000, Sharma, Shashank wrote: > Hi Nick, > > Sonika is OOO for this week. > AFAIK about this issue, looks like the live status is not getting set for your system, on HPD. > > As per the Bspec, we must check live status before trying to read EDID. > Is it possible for you to check with an HDMI analyzer and probe live status register ? BTW I'm not at all convinced about the current live status bit defines we have for g4x. Supposedly someone tested them and found that they don't match the spec, but IIRC when I tried them on one g4x machine here, they did match the spec (well, at least for the ports present on that particular board). So something like this may or may not help: diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 188ad5de020f..80c08016e522 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3302,9 +3302,9 @@ enum skl_disp_power_wells { * Please check the detailed lore in the commit message for for experimental * evidence. */ -#define PORTD_HOTPLUG_LIVE_STATUS_G4X (1 << 29) +#define PORTD_HOTPLUG_LIVE_STATUS_G4X (1 << 27) #define PORTC_HOTPLUG_LIVE_STATUS_G4X (1 << 28) -#define PORTB_HOTPLUG_LIVE_STATUS_G4X (1 << 27) +#define PORTB_HOTPLUG_LIVE_STATUS_G4X (1 << 29) /* VLV DP/HDMI bits again match Bspec */ #define PORTD_HOTPLUG_LIVE_STATUS_VLV (1 << 27) #define PORTC_HOTPLUG_LIVE_STATUS_VLV (1 << 28) -- 2.4.10 > > Regards > Shashank > -----Original Message----- > From: Nick Bowler [mailto:nbowler@draconx.ca] > Sent: Tuesday, February 09, 2016 10:03 PM > To: Jindal, Sonika > Cc: linux-kernel@vger.kernel.org; dri-devel@lists.freedesktop.org; Daniel Vetter; Sharma, Shashank > Subject: Re: PROBLEM: Intel HDMI output busticated on 4.4 (regression) > > On 1/28/16, Nick Bowler <nbowler@draconx.ca> wrote: > > On 2016-01-21, Nick Bowler <nbowler@draconx.ca> wrote: > >> On 2016-01-21, Jindal, Sonika <sonika.jindal@intel.com> wrote: > >>> On 1/21/2016 8:59 AM, Nick Bowler wrote: > >>>> On 1/20/16, Nick Bowler <nbowler@draconx.ca> wrote: > >>>>> On 2016-01-20, Jindal, Sonika <sonika.jindal@intel.com> wrote: > >> [...] > >>>>>> Does the same system works with any other monitor? > >>>>> I'll see if I can find another to try. > >>>> I tried another monitor, and the same problem occurs. > >>> Which make are these monitors? > >> > >> - LG Flatron W2253V > >> - Dell E228WFPc > >> > >>> Do you have any other system other than G45? > >> > >> Nothing else with Linux 4.4, unfortunately. > > > > Anything else you want me to try? > > > > This issue is still present in 4.5-rc1. > > Ping? > > HDMI is still broken on my system in 4.5-rc3. > > Cheers, > Nick > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel -- Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-02-09 17:05 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-01-19 22:26 PROBLEM: Intel HDMI output busticated on 4.4 (regression) Nick Bowler 2016-01-20 4:30 ` Jindal, Sonika 2016-01-20 4:30 ` Jindal, Sonika 2016-01-20 15:33 ` Nick Bowler 2016-01-21 3:29 ` Nick Bowler 2016-01-21 11:07 ` Jindal, Sonika 2016-01-21 11:07 ` Jindal, Sonika 2016-01-21 13:57 ` Nick Bowler 2016-01-28 6:00 ` Nick Bowler 2016-02-09 16:33 ` Nick Bowler 2016-02-09 16:39 ` Sharma, Shashank 2016-02-09 16:39 ` Sharma, Shashank 2016-02-09 17:03 ` Ville Syrjälä [this message] 2016-02-09 17:03 ` Ville Syrjälä 2016-02-09 17:36 ` Ville Syrjälä 2016-02-09 18:22 ` Ville Syrjälä 2016-02-09 18:22 ` Ville Syrjälä 2016-02-10 4:43 ` Sharma, Shashank 2016-02-10 4:43 ` Sharma, Shashank 2016-02-09 18:02 ` Nick Bowler 2016-02-10 9:00 ` Jani Nikula 2016-02-10 9:00 ` Jani Nikula
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20160209170351.GT23290@intel.com \ --to=ville.syrjala@linux.intel.com \ --cc=daniel.vetter@ffwll.ch \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nbowler@draconx.ca \ --cc=shashank.sharma@intel.com \ --cc=sonika.jindal@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.