* [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver
@ 2016-03-14 17:27 Jagan Teki
2016-03-14 17:28 ` [U-Boot] [PATCH v6 2/3] spi: omap3: Make local functions as static Jagan Teki
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Jagan Teki @ 2016-03-14 17:27 UTC (permalink / raw)
To: u-boot
Header file have macro's and register definition and some unneeded
function proto types which becomes tunned further in future patches
and entire driver code resides in one file for more readability.
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Jagan Teki <jteki@openedev.com>
[Fixes on code styles, Remove omap3_spi_txrx|write|read in header]
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
---
Changes for v6:
- Add spaces for to_omap3_spi definition.
drivers/spi/omap3_spi.c | 88 +++++++++++++++++++++++++++++++++++++-
drivers/spi/omap3_spi.h | 109 ------------------------------------------------
2 files changed, 86 insertions(+), 111 deletions(-)
delete mode 100644 drivers/spi/omap3_spi.h
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index 95cdfa3..e043c49 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -18,9 +18,93 @@
#include <spi.h>
#include <malloc.h>
#include <asm/io.h>
-#include "omap3_spi.h"
-#define SPI_WAIT_TIMEOUT 10
+#if defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX)
+#define OMAP3_MCSPI1_BASE 0x48030100
+#define OMAP3_MCSPI2_BASE 0x481A0100
+#else
+#define OMAP3_MCSPI1_BASE 0x48098000
+#define OMAP3_MCSPI2_BASE 0x4809A000
+#define OMAP3_MCSPI3_BASE 0x480B8000
+#define OMAP3_MCSPI4_BASE 0x480BA000
+#endif
+
+/* per-register bitmasks */
+#define OMAP3_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
+#define OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP BIT(2)
+#define OMAP3_MCSPI_SYSCONFIG_AUTOIDLE BIT(0)
+#define OMAP3_MCSPI_SYSCONFIG_SOFTRESET BIT(1)
+
+#define OMAP3_MCSPI_SYSSTATUS_RESETDONE BIT(0)
+
+#define OMAP3_MCSPI_MODULCTRL_SINGLE BIT(0)
+#define OMAP3_MCSPI_MODULCTRL_MS BIT(2)
+#define OMAP3_MCSPI_MODULCTRL_STEST BIT(3)
+
+#define OMAP3_MCSPI_CHCONF_PHA BIT(0)
+#define OMAP3_MCSPI_CHCONF_POL BIT(1)
+#define OMAP3_MCSPI_CHCONF_CLKD_MASK GENMASK(5, 2)
+#define OMAP3_MCSPI_CHCONF_EPOL BIT(6)
+#define OMAP3_MCSPI_CHCONF_WL_MASK GENMASK(11, 7)
+#define OMAP3_MCSPI_CHCONF_TRM_RX_ONLY BIT(12)
+#define OMAP3_MCSPI_CHCONF_TRM_TX_ONLY BIT(13)
+#define OMAP3_MCSPI_CHCONF_TRM_MASK GENMASK(13, 12)
+#define OMAP3_MCSPI_CHCONF_DMAW BIT(14)
+#define OMAP3_MCSPI_CHCONF_DMAR BIT(15)
+#define OMAP3_MCSPI_CHCONF_DPE0 BIT(16)
+#define OMAP3_MCSPI_CHCONF_DPE1 BIT(17)
+#define OMAP3_MCSPI_CHCONF_IS BIT(18)
+#define OMAP3_MCSPI_CHCONF_TURBO BIT(19)
+#define OMAP3_MCSPI_CHCONF_FORCE BIT(20)
+
+#define OMAP3_MCSPI_CHSTAT_RXS BIT(0)
+#define OMAP3_MCSPI_CHSTAT_TXS BIT(1)
+#define OMAP3_MCSPI_CHSTAT_EOT BIT(2)
+
+#define OMAP3_MCSPI_CHCTRL_EN BIT(0)
+#define OMAP3_MCSPI_CHCTRL_DIS (0 << 0)
+
+#define OMAP3_MCSPI_WAKEUPENABLE_WKEN BIT(0)
+
+#define OMAP3_MCSPI_MAX_FREQ 48000000
+#define SPI_WAIT_TIMEOUT 10
+
+/* OMAP3 McSPI registers */
+struct mcspi_channel {
+ unsigned int chconf; /* 0x2C, 0x40, 0x54, 0x68 */
+ unsigned int chstat; /* 0x30, 0x44, 0x58, 0x6C */
+ unsigned int chctrl; /* 0x34, 0x48, 0x5C, 0x70 */
+ unsigned int tx; /* 0x38, 0x4C, 0x60, 0x74 */
+ unsigned int rx; /* 0x3C, 0x50, 0x64, 0x78 */
+};
+
+struct mcspi {
+ unsigned char res1[0x10];
+ unsigned int sysconfig; /* 0x10 */
+ unsigned int sysstatus; /* 0x14 */
+ unsigned int irqstatus; /* 0x18 */
+ unsigned int irqenable; /* 0x1C */
+ unsigned int wakeupenable; /* 0x20 */
+ unsigned int syst; /* 0x24 */
+ unsigned int modulctrl; /* 0x28 */
+ struct mcspi_channel channel[4];
+ /* channel0: 0x2C - 0x3C, bus 0 & 1 & 2 & 3 */
+ /* channel1: 0x40 - 0x50, bus 0 & 1 */
+ /* channel2: 0x54 - 0x64, bus 0 & 1 */
+ /* channel3: 0x68 - 0x78, bus 0 */
+};
+
+struct omap3_spi_slave {
+ struct spi_slave slave;
+ struct mcspi *regs;
+ unsigned int freq;
+ unsigned int mode;
+};
+
+static inline struct omap3_spi_slave *to_omap3_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct omap3_spi_slave, slave);
+}
static void spi_reset(struct omap3_spi_slave *ds)
{
diff --git a/drivers/spi/omap3_spi.h b/drivers/spi/omap3_spi.h
deleted file mode 100644
index 6a07c6d..0000000
--- a/drivers/spi/omap3_spi.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Register definitions for the OMAP3 McSPI Controller
- *
- * Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
- *
- * Parts taken from linux/drivers/spi/omap2_mcspi.c
- * Copyright (C) 2005, 2006 Nokia Corporation
- *
- * Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _OMAP3_SPI_H_
-#define _OMAP3_SPI_H_
-
-#if defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX)
-#define OMAP3_MCSPI1_BASE 0x48030100
-#define OMAP3_MCSPI2_BASE 0x481A0100
-#else
-#define OMAP3_MCSPI1_BASE 0x48098000
-#define OMAP3_MCSPI2_BASE 0x4809A000
-#define OMAP3_MCSPI3_BASE 0x480B8000
-#define OMAP3_MCSPI4_BASE 0x480BA000
-#endif
-
-#define OMAP3_MCSPI_MAX_FREQ 48000000
-
-/* OMAP3 McSPI registers */
-struct mcspi_channel {
- unsigned int chconf; /* 0x2C, 0x40, 0x54, 0x68 */
- unsigned int chstat; /* 0x30, 0x44, 0x58, 0x6C */
- unsigned int chctrl; /* 0x34, 0x48, 0x5C, 0x70 */
- unsigned int tx; /* 0x38, 0x4C, 0x60, 0x74 */
- unsigned int rx; /* 0x3C, 0x50, 0x64, 0x78 */
-};
-
-struct mcspi {
- unsigned char res1[0x10];
- unsigned int sysconfig; /* 0x10 */
- unsigned int sysstatus; /* 0x14 */
- unsigned int irqstatus; /* 0x18 */
- unsigned int irqenable; /* 0x1C */
- unsigned int wakeupenable; /* 0x20 */
- unsigned int syst; /* 0x24 */
- unsigned int modulctrl; /* 0x28 */
- struct mcspi_channel channel[4]; /* channel0: 0x2C - 0x3C, bus 0 & 1 & 2 & 3 */
- /* channel1: 0x40 - 0x50, bus 0 & 1 */
- /* channel2: 0x54 - 0x64, bus 0 & 1 */
- /* channel3: 0x68 - 0x78, bus 0 */
-};
-
-/* per-register bitmasks */
-#define OMAP3_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
-#define OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP BIT(2)
-#define OMAP3_MCSPI_SYSCONFIG_AUTOIDLE BIT(0)
-#define OMAP3_MCSPI_SYSCONFIG_SOFTRESET BIT(1)
-
-#define OMAP3_MCSPI_SYSSTATUS_RESETDONE BIT(0)
-
-#define OMAP3_MCSPI_MODULCTRL_SINGLE BIT(0)
-#define OMAP3_MCSPI_MODULCTRL_MS BIT(2)
-#define OMAP3_MCSPI_MODULCTRL_STEST BIT(3)
-
-#define OMAP3_MCSPI_CHCONF_PHA BIT(0)
-#define OMAP3_MCSPI_CHCONF_POL BIT(1)
-#define OMAP3_MCSPI_CHCONF_CLKD_MASK GENMASK(5, 2)
-#define OMAP3_MCSPI_CHCONF_EPOL BIT(6)
-#define OMAP3_MCSPI_CHCONF_WL_MASK GENMASK(11, 7)
-#define OMAP3_MCSPI_CHCONF_TRM_RX_ONLY BIT(12)
-#define OMAP3_MCSPI_CHCONF_TRM_TX_ONLY BIT(13)
-#define OMAP3_MCSPI_CHCONF_TRM_MASK GENMASK(13, 12)
-#define OMAP3_MCSPI_CHCONF_DMAW BIT(14)
-#define OMAP3_MCSPI_CHCONF_DMAR BIT(15)
-#define OMAP3_MCSPI_CHCONF_DPE0 BIT(16)
-#define OMAP3_MCSPI_CHCONF_DPE1 BIT(17)
-#define OMAP3_MCSPI_CHCONF_IS BIT(18)
-#define OMAP3_MCSPI_CHCONF_TURBO BIT(19)
-#define OMAP3_MCSPI_CHCONF_FORCE BIT(20)
-
-#define OMAP3_MCSPI_CHSTAT_RXS BIT(0)
-#define OMAP3_MCSPI_CHSTAT_TXS BIT(1)
-#define OMAP3_MCSPI_CHSTAT_EOT BIT(2)
-
-#define OMAP3_MCSPI_CHCTRL_EN BIT(0)
-#define OMAP3_MCSPI_CHCTRL_DIS (0 << 0)
-
-#define OMAP3_MCSPI_WAKEUPENABLE_WKEN BIT(0)
-
-struct omap3_spi_slave {
- struct spi_slave slave;
- struct mcspi *regs;
- unsigned int freq;
- unsigned int mode;
-};
-
-static inline struct omap3_spi_slave *to_omap3_spi(struct spi_slave *slave)
-{
- return container_of(slave, struct omap3_spi_slave, slave);
-}
-
-int omap3_spi_txrx(struct spi_slave *slave, unsigned int len, const void *txp,
- void *rxp, unsigned long flags);
-int omap3_spi_write(struct spi_slave *slave, unsigned int len, const void *txp,
- unsigned long flags);
-int omap3_spi_read(struct spi_slave *slave, unsigned int len, void *rxp,
- unsigned long flags);
-
-#endif /* _OMAP3_SPI_H_ */
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v6 2/3] spi: omap3: Make local functions as static
2016-03-14 17:27 [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver Jagan Teki
@ 2016-03-14 17:28 ` Jagan Teki
2016-03-15 6:17 ` Jagan Teki
2016-03-15 11:52 ` Tom Rini
2016-03-14 17:28 ` [U-Boot] [PATCH v6 3/3] spi: omap3: Convert to driver model Jagan Teki
` (2 subsequent siblings)
3 siblings, 2 replies; 9+ messages in thread
From: Jagan Teki @ 2016-03-14 17:28 UTC (permalink / raw)
To: u-boot
Attach static on local defined functions.
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
---
Changes for v6:
- None.
drivers/spi/omap3_spi.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index e043c49..eb6ad37 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -306,8 +306,8 @@ void spi_release_bus(struct spi_slave *slave)
spi_reset(ds);
}
-int omap3_spi_write(struct spi_slave *slave, unsigned int len, const void *txp,
- unsigned long flags)
+static int omap3_spi_write(struct spi_slave *slave, unsigned int len,
+ const void *txp, unsigned long flags)
{
struct omap3_spi_slave *ds = to_omap3_spi(slave);
int i;
@@ -360,8 +360,8 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const void *txp,
return 0;
}
-int omap3_spi_read(struct spi_slave *slave, unsigned int len, void *rxp,
- unsigned long flags)
+static int omap3_spi_read(struct spi_slave *slave, unsigned int len,
+ void *rxp, unsigned long flags)
{
struct omap3_spi_slave *ds = to_omap3_spi(slave);
int i;
@@ -414,8 +414,8 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, void *rxp,
}
/*McSPI Transmit Receive Mode*/
-int omap3_spi_txrx(struct spi_slave *slave, unsigned int len,
- const void *txp, void *rxp, unsigned long flags)
+static int omap3_spi_txrx(struct spi_slave *slave, unsigned int len,
+ const void *txp, void *rxp, unsigned long flags)
{
struct omap3_spi_slave *ds = to_omap3_spi(slave);
ulong start;
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v6 3/3] spi: omap3: Convert to driver model
2016-03-14 17:27 [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver Jagan Teki
2016-03-14 17:28 ` [U-Boot] [PATCH v6 2/3] spi: omap3: Make local functions as static Jagan Teki
@ 2016-03-14 17:28 ` Jagan Teki
2016-03-15 6:18 ` Jagan Teki
2016-03-15 11:52 ` Tom Rini
2016-03-15 6:16 ` [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver Jagan Teki
2016-03-15 11:52 ` Tom Rini
3 siblings, 2 replies; 9+ messages in thread
From: Jagan Teki @ 2016-03-14 17:28 UTC (permalink / raw)
To: u-boot
After this conversion the driver will able to support both dm and non-dm
and code is more extensible like we can remove the non-dm part simply
without touching anycode if all the boards which are using this driver
become dm driven.
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Christophe Ricard <christophe-h.ricard@st.com>
Tested-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
[Set priv->wordlen, Add Kconfig entry and file credit for dm conversion]
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
---
Changes for v6:
- Add spaces for to_omap3_spi definition.
drivers/spi/Kconfig | 7 +
drivers/spi/omap3_spi.c | 679 +++++++++++++++++++++++++++++-------------------
2 files changed, 416 insertions(+), 270 deletions(-)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2cdb110..f0258f8 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -155,6 +155,13 @@ config ZYNQ_QSPI
Zynq QSPI IP core. This IP is used to connect the flash in
4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
+config OMAP3_SPI
+ bool "McSPI driver for OMAP"
+ help
+ SPI master controller for OMAP24XX and later Multichannel SPI
+ (McSPI). This driver be used to access SPI chips on platforms
+ embedding this OMAP3 McSPI IP core.
+
endif # if DM_SPI
config FSL_ESPI
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index eb6ad37..98ee6d3 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -1,4 +1,7 @@
/*
+ * Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
+ * Christophe Ricard <christophe.ricard@gmail.com>
+ *
* Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
*
* Driver for McSPI controller on OMAP3. Based on davinci_spi.c
@@ -15,10 +18,13 @@
*/
#include <common.h>
+#include <dm.h>
#include <spi.h>
#include <malloc.h>
#include <asm/io.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX)
#define OMAP3_MCSPI1_BASE 0x48030100
#define OMAP3_MCSPI2_BASE 0x481A0100
@@ -65,6 +71,8 @@
#define OMAP3_MCSPI_CHCTRL_DIS (0 << 0)
#define OMAP3_MCSPI_WAKEUPENABLE_WKEN BIT(0)
+#define MCSPI_PINDIR_D0_IN_D1_OUT 0
+#define MCSPI_PINDIR_D0_OUT_D1_IN 1
#define OMAP3_MCSPI_MAX_FREQ 48000000
#define SPI_WAIT_TIMEOUT 10
@@ -94,312 +102,124 @@ struct mcspi {
/* channel3: 0x68 - 0x78, bus 0 */
};
-struct omap3_spi_slave {
- struct spi_slave slave;
+struct omap3_spi_priv {
struct mcspi *regs;
+ unsigned int cs;
unsigned int freq;
unsigned int mode;
+ unsigned int wordlen;
+ unsigned int pin_dir:1;
};
-static inline struct omap3_spi_slave *to_omap3_spi(struct spi_slave *slave)
+static void omap3_spi_write_chconf(struct omap3_spi_priv *priv, int val)
{
- return container_of(slave, struct omap3_spi_slave, slave);
-}
-
-static void spi_reset(struct omap3_spi_slave *ds)
-{
- unsigned int tmp;
-
- writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, &ds->regs->sysconfig);
- do {
- tmp = readl(&ds->regs->sysstatus);
- } while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE));
-
- writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE |
- OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP |
- OMAP3_MCSPI_SYSCONFIG_SMARTIDLE,
- &ds->regs->sysconfig);
-
- writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, &ds->regs->wakeupenable);
-}
-
-static void omap3_spi_write_chconf(struct omap3_spi_slave *ds, int val)
-{
- writel(val, &ds->regs->channel[ds->slave.cs].chconf);
+ writel(val, &priv->regs->channel[priv->cs].chconf);
/* Flash post writes to make immediate effect */
- readl(&ds->regs->channel[ds->slave.cs].chconf);
+ readl(&priv->regs->channel[priv->cs].chconf);
}
-static void omap3_spi_set_enable(struct omap3_spi_slave *ds, int enable)
+static void omap3_spi_set_enable(struct omap3_spi_priv *priv, int enable)
{
- writel(enable, &ds->regs->channel[ds->slave.cs].chctrl);
+ writel(enable, &priv->regs->channel[priv->cs].chctrl);
/* Flash post writes to make immediate effect */
- readl(&ds->regs->channel[ds->slave.cs].chctrl);
-}
-
-void spi_init()
-{
- /* do nothing */
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct omap3_spi_slave *ds;
- struct mcspi *regs;
-
- /*
- * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
- * with different number of chip selects (CS, channels):
- * McSPI1 has 4 CS (bus 0, cs 0 - 3)
- * McSPI2 has 2 CS (bus 1, cs 0 - 1)
- * McSPI3 has 2 CS (bus 2, cs 0 - 1)
- * McSPI4 has 1 CS (bus 3, cs 0)
- */
-
- switch (bus) {
- case 0:
- regs = (struct mcspi *)OMAP3_MCSPI1_BASE;
- break;
-#ifdef OMAP3_MCSPI2_BASE
- case 1:
- regs = (struct mcspi *)OMAP3_MCSPI2_BASE;
- break;
-#endif
-#ifdef OMAP3_MCSPI3_BASE
- case 2:
- regs = (struct mcspi *)OMAP3_MCSPI3_BASE;
- break;
-#endif
-#ifdef OMAP3_MCSPI4_BASE
- case 3:
- regs = (struct mcspi *)OMAP3_MCSPI4_BASE;
- break;
-#endif
- default:
- printf("SPI error: unsupported bus %i. \
- Supported busses 0 - 3\n", bus);
- return NULL;
- }
-
- if (((bus == 0) && (cs > 3)) ||
- ((bus == 1) && (cs > 1)) ||
- ((bus == 2) && (cs > 1)) ||
- ((bus == 3) && (cs > 0))) {
- printf("SPI error: unsupported chip select %i \
- on bus %i\n", cs, bus);
- return NULL;
- }
-
- if (max_hz > OMAP3_MCSPI_MAX_FREQ) {
- printf("SPI error: unsupported frequency %i Hz. \
- Max frequency is 48 Mhz\n", max_hz);
- return NULL;
- }
-
- if (mode > SPI_MODE_3) {
- printf("SPI error: unsupported SPI mode %i\n", mode);
- return NULL;
- }
-
- ds = spi_alloc_slave(struct omap3_spi_slave, bus, cs);
- if (!ds) {
- printf("SPI error: malloc of SPI structure failed\n");
- return NULL;
- }
-
- ds->regs = regs;
- ds->freq = max_hz;
- ds->mode = mode;
-
- return &ds->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct omap3_spi_slave *ds = to_omap3_spi(slave);
-
- free(ds);
+ readl(&priv->regs->channel[priv->cs].chctrl);
}
-int spi_claim_bus(struct spi_slave *slave)
-{
- struct omap3_spi_slave *ds = to_omap3_spi(slave);
- unsigned int conf, div = 0;
-
- /* McSPI global module configuration */
-
- /*
- * setup when switching from (reset default) slave mode
- * to single-channel master mode
- */
- spi_reset(ds);
- conf = readl(&ds->regs->modulctrl);
- conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS);
- conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
- writel(conf, &ds->regs->modulctrl);
-
- /* McSPI individual channel configuration */
-
- /* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */
- if (ds->freq) {
- while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div))
- > ds->freq)
- div++;
- } else
- div = 0xC;
-
- conf = readl(&ds->regs->channel[ds->slave.cs].chconf);
-
- /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
- * REVISIT: this controller could support SPI_3WIRE mode.
- */
-#ifdef CONFIG_OMAP3_SPI_D0_D1_SWAPPED
- /*
- * Some boards have D0 wired as MOSI / D1 as MISO instead of
- * The normal D0 as MISO / D1 as MOSI.
- */
- conf &= ~OMAP3_MCSPI_CHCONF_DPE0;
- conf |= OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1;
-#else
- conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
- conf |= OMAP3_MCSPI_CHCONF_DPE0;
-#endif
-
- /* wordlength */
- conf &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
- conf |= (ds->slave.wordlen - 1) << 7;
-
- /* set chipselect polarity; manage with FORCE */
- if (!(ds->mode & SPI_CS_HIGH))
- conf |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */
- else
- conf &= ~OMAP3_MCSPI_CHCONF_EPOL;
-
- /* set clock divisor */
- conf &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK;
- conf |= div << 2;
-
- /* set SPI mode 0..3 */
- if (ds->mode & SPI_CPOL)
- conf |= OMAP3_MCSPI_CHCONF_POL;
- else
- conf &= ~OMAP3_MCSPI_CHCONF_POL;
- if (ds->mode & SPI_CPHA)
- conf |= OMAP3_MCSPI_CHCONF_PHA;
- else
- conf &= ~OMAP3_MCSPI_CHCONF_PHA;
-
- /* Transmit & receive mode */
- conf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
-
- omap3_spi_write_chconf(ds,conf);
-
- return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
- struct omap3_spi_slave *ds = to_omap3_spi(slave);
-
- /* Reset the SPI hardware */
- spi_reset(ds);
-}
-
-static int omap3_spi_write(struct spi_slave *slave, unsigned int len,
+static int omap3_spi_write(struct omap3_spi_priv *priv, unsigned int len,
const void *txp, unsigned long flags)
{
- struct omap3_spi_slave *ds = to_omap3_spi(slave);
- int i;
ulong start;
- int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+ int i, chconf;
+
+ chconf = readl(&priv->regs->channel[priv->cs].chconf);
/* Enable the channel */
- omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
+ omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
- chconf |= (ds->slave.wordlen - 1) << 7;
+ chconf |= (priv->wordlen - 1) << 7;
chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY;
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
- omap3_spi_write_chconf(ds,chconf);
+ omap3_spi_write_chconf(priv, chconf);
for (i = 0; i < len; i++) {
/* wait till TX register is empty (TXS == 1) */
start = get_timer(0);
- while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+ while (!(readl(&priv->regs->channel[priv->cs].chstat) &
OMAP3_MCSPI_CHSTAT_TXS)) {
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
printf("SPI TXS timed out, status=0x%08x\n",
- readl(&ds->regs->channel[ds->slave.cs].chstat));
+ readl(&priv->regs->channel[priv->cs].chstat));
return -1;
}
}
/* Write the data */
- unsigned int *tx = &ds->regs->channel[ds->slave.cs].tx;
- if (ds->slave.wordlen > 16)
+ unsigned int *tx = &priv->regs->channel[priv->cs].tx;
+ if (priv->wordlen > 16)
writel(((u32 *)txp)[i], tx);
- else if (ds->slave.wordlen > 8)
+ else if (priv->wordlen > 8)
writel(((u16 *)txp)[i], tx);
else
writel(((u8 *)txp)[i], tx);
}
/* wait to finish of transfer */
- while ((readl(&ds->regs->channel[ds->slave.cs].chstat) &
- (OMAP3_MCSPI_CHSTAT_EOT | OMAP3_MCSPI_CHSTAT_TXS)) !=
- (OMAP3_MCSPI_CHSTAT_EOT | OMAP3_MCSPI_CHSTAT_TXS));
+ while ((readl(&priv->regs->channel[priv->cs].chstat) &
+ (OMAP3_MCSPI_CHSTAT_EOT | OMAP3_MCSPI_CHSTAT_TXS)) !=
+ (OMAP3_MCSPI_CHSTAT_EOT | OMAP3_MCSPI_CHSTAT_TXS))
+ ;
/* Disable the channel otherwise the next immediate RX will get affected */
- omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
+ omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
if (flags & SPI_XFER_END) {
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
- omap3_spi_write_chconf(ds,chconf);
+ omap3_spi_write_chconf(priv, chconf);
}
return 0;
}
-static int omap3_spi_read(struct spi_slave *slave, unsigned int len,
+static int omap3_spi_read(struct omap3_spi_priv *priv, unsigned int len,
void *rxp, unsigned long flags)
{
- struct omap3_spi_slave *ds = to_omap3_spi(slave);
- int i;
+ int i, chconf;
ulong start;
- int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+ chconf = readl(&priv->regs->channel[priv->cs].chconf);
/* Enable the channel */
- omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
+ omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
- chconf |= (ds->slave.wordlen - 1) << 7;
+ chconf |= (priv->wordlen - 1) << 7;
chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY;
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
- omap3_spi_write_chconf(ds,chconf);
+ omap3_spi_write_chconf(priv, chconf);
- writel(0, &ds->regs->channel[ds->slave.cs].tx);
+ writel(0, &priv->regs->channel[priv->cs].tx);
for (i = 0; i < len; i++) {
start = get_timer(0);
/* Wait till RX register contains data (RXS == 1) */
- while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+ while (!(readl(&priv->regs->channel[priv->cs].chstat) &
OMAP3_MCSPI_CHSTAT_RXS)) {
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
printf("SPI RXS timed out, status=0x%08x\n",
- readl(&ds->regs->channel[ds->slave.cs].chstat));
+ readl(&priv->regs->channel[priv->cs].chstat));
return -1;
}
}
/* Disable the channel to prevent furher receiving */
- if(i == (len - 1))
- omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
+ if (i == (len - 1))
+ omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
/* Read the data */
- unsigned int *rx = &ds->regs->channel[ds->slave.cs].rx;
- if (ds->slave.wordlen > 16)
+ unsigned int *rx = &priv->regs->channel[priv->cs].rx;
+ if (priv->wordlen > 16)
((u32 *)rxp)[i] = readl(rx);
- else if (ds->slave.wordlen > 8)
+ else if (priv->wordlen > 8)
((u16 *)rxp)[i] = (u16)readl(rx);
else
((u8 *)rxp)[i] = (u8)readl(rx);
@@ -407,133 +227,452 @@ static int omap3_spi_read(struct spi_slave *slave, unsigned int len,
if (flags & SPI_XFER_END) {
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
- omap3_spi_write_chconf(ds,chconf);
+ omap3_spi_write_chconf(priv, chconf);
}
return 0;
}
/*McSPI Transmit Receive Mode*/
-static int omap3_spi_txrx(struct spi_slave *slave, unsigned int len,
+static int omap3_spi_txrx(struct omap3_spi_priv *priv, unsigned int len,
const void *txp, void *rxp, unsigned long flags)
{
- struct omap3_spi_slave *ds = to_omap3_spi(slave);
ulong start;
- int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
- int i=0;
+ int chconf, i = 0;
+
+ chconf = readl(&priv->regs->channel[priv->cs].chconf);
/*Enable SPI channel*/
- omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
+ omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
/*set TRANSMIT-RECEIVE Mode*/
chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
- chconf |= (ds->slave.wordlen - 1) << 7;
+ chconf |= (priv->wordlen - 1) << 7;
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
- omap3_spi_write_chconf(ds,chconf);
+ omap3_spi_write_chconf(priv, chconf);
/*Shift in and out 1 byte@time*/
for (i=0; i < len; i++){
/* Write: wait for TX empty (TXS == 1)*/
start = get_timer(0);
- while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+ while (!(readl(&priv->regs->channel[priv->cs].chstat) &
OMAP3_MCSPI_CHSTAT_TXS)) {
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
printf("SPI TXS timed out, status=0x%08x\n",
- readl(&ds->regs->channel[ds->slave.cs].chstat));
+ readl(&priv->regs->channel[priv->cs].chstat));
return -1;
}
}
/* Write the data */
- unsigned int *tx = &ds->regs->channel[ds->slave.cs].tx;
- if (ds->slave.wordlen > 16)
+ unsigned int *tx = &priv->regs->channel[priv->cs].tx;
+ if (priv->wordlen > 16)
writel(((u32 *)txp)[i], tx);
- else if (ds->slave.wordlen > 8)
+ else if (priv->wordlen > 8)
writel(((u16 *)txp)[i], tx);
else
writel(((u8 *)txp)[i], tx);
/*Read: wait for RX containing data (RXS == 1)*/
start = get_timer(0);
- while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+ while (!(readl(&priv->regs->channel[priv->cs].chstat) &
OMAP3_MCSPI_CHSTAT_RXS)) {
if (get_timer(start) > SPI_WAIT_TIMEOUT) {
printf("SPI RXS timed out, status=0x%08x\n",
- readl(&ds->regs->channel[ds->slave.cs].chstat));
+ readl(&priv->regs->channel[priv->cs].chstat));
return -1;
}
}
/* Read the data */
- unsigned int *rx = &ds->regs->channel[ds->slave.cs].rx;
- if (ds->slave.wordlen > 16)
+ unsigned int *rx = &priv->regs->channel[priv->cs].rx;
+ if (priv->wordlen > 16)
((u32 *)rxp)[i] = readl(rx);
- else if (ds->slave.wordlen > 8)
+ else if (priv->wordlen > 8)
((u16 *)rxp)[i] = (u16)readl(rx);
else
((u8 *)rxp)[i] = (u8)readl(rx);
}
/* Disable the channel */
- omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
+ omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
/*if transfer must be terminated disable the channel*/
if (flags & SPI_XFER_END) {
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
- omap3_spi_write_chconf(ds,chconf);
+ omap3_spi_write_chconf(priv, chconf);
}
return 0;
}
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
+static int _spi_xfer(struct omap3_spi_priv *priv, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
{
- struct omap3_spi_slave *ds = to_omap3_spi(slave);
unsigned int len;
int ret = -1;
- if (ds->slave.wordlen < 4 || ds->slave.wordlen > 32) {
- printf("omap3_spi: invalid wordlen %d\n", ds->slave.wordlen);
+ if (priv->wordlen < 4 || priv->wordlen > 32) {
+ printf("omap3_spi: invalid wordlen %d\n", priv->wordlen);
return -1;
}
- if (bitlen % ds->slave.wordlen)
+ if (bitlen % priv->wordlen)
return -1;
- len = bitlen / ds->slave.wordlen;
+ len = bitlen / priv->wordlen;
if (bitlen == 0) { /* only change CS */
- int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+ int chconf = readl(&priv->regs->channel[priv->cs].chconf);
if (flags & SPI_XFER_BEGIN) {
- omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
+ omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_EN);
chconf |= OMAP3_MCSPI_CHCONF_FORCE;
- omap3_spi_write_chconf(ds,chconf);
+ omap3_spi_write_chconf(priv, chconf);
}
if (flags & SPI_XFER_END) {
chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
- omap3_spi_write_chconf(ds,chconf);
- omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
+ omap3_spi_write_chconf(priv, chconf);
+ omap3_spi_set_enable(priv, OMAP3_MCSPI_CHCTRL_DIS);
}
ret = 0;
} else {
if (dout != NULL && din != NULL)
- ret = omap3_spi_txrx(slave, len, dout, din, flags);
+ ret = omap3_spi_txrx(priv, len, dout, din, flags);
else if (dout != NULL)
- ret = omap3_spi_write(slave, len, dout, flags);
+ ret = omap3_spi_write(priv, len, dout, flags);
else if (din != NULL)
- ret = omap3_spi_read(slave, len, din, flags);
+ ret = omap3_spi_read(priv, len, din, flags);
}
return ret;
}
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+static void _omap3_spi_set_speed(struct omap3_spi_priv *priv)
+{
+ uint32_t confr, div = 0;
+
+ confr = readl(&priv->regs->channel[priv->cs].chconf);
+
+ /* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */
+ if (priv->freq) {
+ while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div))
+ > priv->freq)
+ div++;
+ } else {
+ div = 0xC;
+ }
+
+ /* set clock divisor */
+ confr &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK;
+ confr |= div << 2;
+
+ omap3_spi_write_chconf(priv, confr);
+}
+
+static void _omap3_spi_set_mode(struct omap3_spi_priv *priv)
+{
+ uint32_t confr;
+
+ confr = readl(&priv->regs->channel[priv->cs].chconf);
+
+ /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
+ * REVISIT: this controller could support SPI_3WIRE mode.
+ */
+ if (priv->pin_dir == MCSPI_PINDIR_D0_IN_D1_OUT) {
+ confr &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
+ confr |= OMAP3_MCSPI_CHCONF_DPE0;
+ } else {
+ confr &= ~OMAP3_MCSPI_CHCONF_DPE0;
+ confr |= OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1;
+ }
+
+ /* set SPI mode 0..3 */
+ confr &= ~(OMAP3_MCSPI_CHCONF_POL | OMAP3_MCSPI_CHCONF_PHA);
+ if (priv->mode & SPI_CPHA)
+ confr |= OMAP3_MCSPI_CHCONF_PHA;
+ if (priv->mode & SPI_CPOL)
+ confr |= OMAP3_MCSPI_CHCONF_POL;
+
+ /* set chipselect polarity; manage with FORCE */
+ if (!(priv->mode & SPI_CS_HIGH))
+ confr |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */
+ else
+ confr &= ~OMAP3_MCSPI_CHCONF_EPOL;
+
+ /* Transmit & receive mode */
+ confr &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+
+ omap3_spi_write_chconf(priv, confr);
+}
+
+static void _omap3_spi_set_wordlen(struct omap3_spi_priv *priv)
+{
+ unsigned int confr;
+
+ /* McSPI individual channel configuration */
+ confr = readl(&priv->regs->channel[priv->wordlen].chconf);
+
+ /* wordlength */
+ confr &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
+ confr |= (priv->wordlen - 1) << 7;
+
+ omap3_spi_write_chconf(priv, confr);
+}
+
+static void spi_reset(struct mcspi *regs)
+{
+ unsigned int tmp;
+
+ writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, ®s->sysconfig);
+ do {
+ tmp = readl(®s->sysstatus);
+ } while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE));
+
+ writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE |
+ OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP |
+ OMAP3_MCSPI_SYSCONFIG_SMARTIDLE, ®s->sysconfig);
+
+ writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, ®s->wakeupenable);
+}
+
+static void _omap3_spi_claim_bus(struct omap3_spi_priv *priv)
+{
+ unsigned int conf;
+
+ spi_reset(priv->regs);
+
+ /*
+ * setup when switching from (reset default) slave mode
+ * to single-channel master mode
+ */
+ conf = readl(&priv->regs->modulctrl);
+ conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS);
+ conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
+
+ writel(conf, &priv->regs->modulctrl);
+
+ _omap3_spi_set_mode(priv);
+ _omap3_spi_set_speed(priv);
+}
+
+#ifndef CONFIG_DM_SPI
+
+struct omap3_spi_slave {
+ struct spi_slave slave;
+ struct omap3_spi_priv spi_priv;
+};
+
+struct omap3_spi_priv *priv;
+
+static inline struct omap3_spi_slave *to_omap3_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct omap3_spi_slave, slave);
+}
+
+void spi_init(void)
{
- return 1;
+ /* do nothing */
}
-void spi_cs_activate(struct spi_slave *slave)
+void spi_free_slave(struct spi_slave *slave)
{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+
+ free(ds);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ _omap3_spi_claim_bus(priv);
+ _omap3_spi_set_wordlen(priv);
+ _omap3_spi_set_mode(priv);
+ _omap3_spi_set_speed(priv);
+
+ return 0;
}
-void spi_cs_deactivate(struct spi_slave *slave)
+void spi_release_bus(struct spi_slave *slave)
{
+ /* Reset the SPI hardware */
+ spi_reset(priv->regs);
}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct omap3_spi_slave *ds;
+ struct mcspi *regs;
+
+ /*
+ * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
+ * with different number of chip selects (CS, channels):
+ * McSPI1 has 4 CS (bus 0, cs 0 - 3)
+ * McSPI2 has 2 CS (bus 1, cs 0 - 1)
+ * McSPI3 has 2 CS (bus 2, cs 0 - 1)
+ * McSPI4 has 1 CS (bus 3, cs 0)
+ */
+
+ switch (bus) {
+ case 0:
+ regs = (struct mcspi *)OMAP3_MCSPI1_BASE;
+ break;
+#ifdef OMAP3_MCSPI2_BASE
+ case 1:
+ regs = (struct mcspi *)OMAP3_MCSPI2_BASE;
+ break;
+#endif
+#ifdef OMAP3_MCSPI3_BASE
+ case 2:
+ regs = (struct mcspi *)OMAP3_MCSPI3_BASE;
+ break;
+#endif
+#ifdef OMAP3_MCSPI4_BASE
+ case 3:
+ regs = (struct mcspi *)OMAP3_MCSPI4_BASE;
+ break;
+#endif
+ default:
+ printf("SPI error: unsupported bus %i. Supported busses 0 - 3\n", bus);
+ return NULL;
+ }
+
+ if (((bus == 0) && (cs > 3)) ||
+ ((bus == 1) && (cs > 1)) ||
+ ((bus == 2) && (cs > 1)) ||
+ ((bus == 3) && (cs > 0))) {
+ printf("SPI error: unsupported chip select %i on bus %i\n", cs, bus);
+ return NULL;
+ }
+
+ if (max_hz > OMAP3_MCSPI_MAX_FREQ) {
+ printf("SPI error: unsupported frequency %i Hz. Max frequency is 48 Mhz\n", max_hz);
+ return NULL;
+ }
+
+ if (mode > SPI_MODE_3) {
+ printf("SPI error: unsupported SPI mode %i\n", mode);
+ return NULL;
+ }
+
+ ds = spi_alloc_slave(struct omap3_spi_slave, bus, cs);
+ if (!ds) {
+ printf("SPI error: malloc of SPI structure failed\n");
+ return NULL;
+ }
+
+ priv = &ds->spi_priv;
+
+ priv->regs = regs;
+ priv->cs = cs;
+ priv->freq = max_hz;
+ priv->mode = mode;
+ priv->wordlen = ds->slave.wordlen;
+#ifdef CONFIG_OMAP3_SPI_D0_D1_SWAPPED
+ priv->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
+#endif
+
+ return &ds->slave;
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{ return _spi_xfer(priv, bitlen, dout, din, flags); }
+
+#else
+
+static int omap3_spi_claim_bus(struct udevice *dev)
+{
+ struct udevice *bus = dev->parent;
+ struct omap3_spi_priv *priv = dev_get_priv(bus);
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
+
+ priv->cs = slave_plat->cs;
+ priv->mode = slave_plat->mode;
+ priv->freq = slave_plat->max_hz;
+ _omap3_spi_claim_bus(priv);
+
+ return 0;
+}
+
+static int omap3_spi_release_bus(struct udevice *dev)
+{
+ struct udevice *bus = dev->parent;
+ struct omap3_spi_priv *priv = dev_get_priv(bus);
+
+ /* Reset the SPI hardware */
+ spi_reset(priv->regs);
+
+ return 0;
+}
+
+static int omap3_spi_set_wordlen(struct udevice *dev, unsigned int wordlen)
+{
+ struct udevice *bus = dev->parent;
+ struct omap3_spi_priv *priv = dev_get_priv(bus);
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
+
+ priv->cs = slave_plat->cs;
+ priv->wordlen = wordlen;
+ _omap3_spi_set_wordlen(priv);
+
+ return 0;
+}
+
+static int omap3_spi_probe(struct udevice *dev)
+{
+ struct omap3_spi_priv *priv = dev_get_priv(dev);
+ const void *blob = gd->fdt_blob;
+ int node = dev->of_offset;
+
+ priv->regs = (struct mcspi *)dev_get_addr(dev);
+ priv->pin_dir = fdtdec_get_uint(blob, node, "ti,pindir-d0-out-d1-in",
+ MCSPI_PINDIR_D0_IN_D1_OUT);
+ priv->wordlen = SPI_DEFAULT_WORDLEN;
+ return 0;
+}
+
+static int omap3_spi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct udevice *bus = dev->parent;
+ struct omap3_spi_priv *priv = dev_get_priv(bus);
+
+ return _spi_xfer(priv, bitlen, dout, din, flags);
+}
+
+static int omap3_spi_set_speed(struct udevice *bus, unsigned int speed)
+{
+ return 0;
+}
+
+static int omap3_spi_set_mode(struct udevice *bus, uint mode)
+{
+ return 0;
+}
+
+static const struct dm_spi_ops omap3_spi_ops = {
+ .claim_bus = omap3_spi_claim_bus,
+ .release_bus = omap3_spi_release_bus,
+ .set_wordlen = omap3_spi_set_wordlen,
+ .xfer = omap3_spi_xfer,
+ .set_speed = omap3_spi_set_speed,
+ .set_mode = omap3_spi_set_mode,
+ /*
+ * cs_info is not needed, since we require all chip selects to be
+ * in the device tree explicitly
+ */
+};
+
+static const struct udevice_id omap3_spi_ids[] = {
+ { .compatible = "ti,omap2-mcspi" },
+ { .compatible = "ti,omap4-mcspi" },
+ { }
+};
+
+U_BOOT_DRIVER(omap3_spi) = {
+ .name = "omap3_spi",
+ .id = UCLASS_SPI,
+ .of_match = omap3_spi_ids,
+ .probe = omap3_spi_probe,
+ .ops = &omap3_spi_ops,
+ .priv_auto_alloc_size = sizeof(struct omap3_spi_priv),
+ .probe = omap3_spi_probe,
+};
+#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver
2016-03-14 17:27 [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver Jagan Teki
2016-03-14 17:28 ` [U-Boot] [PATCH v6 2/3] spi: omap3: Make local functions as static Jagan Teki
2016-03-14 17:28 ` [U-Boot] [PATCH v6 3/3] spi: omap3: Convert to driver model Jagan Teki
@ 2016-03-15 6:16 ` Jagan Teki
2016-03-15 11:52 ` Tom Rini
3 siblings, 0 replies; 9+ messages in thread
From: Jagan Teki @ 2016-03-15 6:16 UTC (permalink / raw)
To: u-boot
On 14 March 2016 at 22:57, Jagan Teki <jteki@openedev.com> wrote:
> Header file have macro's and register definition and some unneeded
> function proto types which becomes tunned further in future patches
> and entire driver code resides in one file for more readability.
>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: Simon Glass <sjg@chromium.org>
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> [Fixes on code styles, Remove omap3_spi_txrx|write|read in header]
> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
> ---
> Changes for v6:
> - Add spaces for to_omap3_spi definition.
Applied to u-boot-spi/master
--
Jagan.
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v6 2/3] spi: omap3: Make local functions as static
2016-03-14 17:28 ` [U-Boot] [PATCH v6 2/3] spi: omap3: Make local functions as static Jagan Teki
@ 2016-03-15 6:17 ` Jagan Teki
2016-03-15 11:52 ` Tom Rini
1 sibling, 0 replies; 9+ messages in thread
From: Jagan Teki @ 2016-03-15 6:17 UTC (permalink / raw)
To: u-boot
On 14 March 2016 at 22:58, Jagan Teki <jteki@openedev.com> wrote:
> Attach static on local defined functions.
>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: Simon Glass <sjg@chromium.org>
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
> ---
> Changes for v6:
> - None.
Applied to u-boot-spi/master
--
Jagan.
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v6 3/3] spi: omap3: Convert to driver model
2016-03-14 17:28 ` [U-Boot] [PATCH v6 3/3] spi: omap3: Convert to driver model Jagan Teki
@ 2016-03-15 6:18 ` Jagan Teki
2016-03-15 11:52 ` Tom Rini
1 sibling, 0 replies; 9+ messages in thread
From: Jagan Teki @ 2016-03-15 6:18 UTC (permalink / raw)
To: u-boot
On 14 March 2016 at 22:58, Jagan Teki <jteki@openedev.com> wrote:
> After this conversion the driver will able to support both dm and non-dm
> and code is more extensible like we can remove the non-dm part simply
> without touching anycode if all the boards which are using this driver
> become dm driven.
>
> Cc: Tom Rini <trini@konsulko.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Acked-by: Christophe Ricard <christophe-h.ricard@st.com>
> Tested-by: Christophe Ricard <christophe-h.ricard@st.com>
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> [Set priv->wordlen, Add Kconfig entry and file credit for dm conversion]
> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
> ---
> Changes for v6:
> - Add spaces for to_omap3_spi definition.
Applied to u-boot-spi/master
--
Jagan.
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v6 2/3] spi: omap3: Make local functions as static
2016-03-14 17:28 ` [U-Boot] [PATCH v6 2/3] spi: omap3: Make local functions as static Jagan Teki
2016-03-15 6:17 ` Jagan Teki
@ 2016-03-15 11:52 ` Tom Rini
1 sibling, 0 replies; 9+ messages in thread
From: Tom Rini @ 2016-03-15 11:52 UTC (permalink / raw)
To: u-boot
On Mon, Mar 14, 2016 at 10:58:00PM +0530, Jagan Teki wrote:
> Attach static on local defined functions.
>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: Simon Glass <sjg@chromium.org>
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160315/7e6b640b/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver
2016-03-14 17:27 [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver Jagan Teki
` (2 preceding siblings ...)
2016-03-15 6:16 ` [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver Jagan Teki
@ 2016-03-15 11:52 ` Tom Rini
3 siblings, 0 replies; 9+ messages in thread
From: Tom Rini @ 2016-03-15 11:52 UTC (permalink / raw)
To: u-boot
On Mon, Mar 14, 2016 at 10:57:59PM +0530, Jagan Teki wrote:
> Header file have macro's and register definition and some unneeded
> function proto types which becomes tunned further in future patches
> and entire driver code resides in one file for more readability.
>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: Simon Glass <sjg@chromium.org>
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> [Fixes on code styles, Remove omap3_spi_txrx|write|read in header]
> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160315/2236c15f/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v6 3/3] spi: omap3: Convert to driver model
2016-03-14 17:28 ` [U-Boot] [PATCH v6 3/3] spi: omap3: Convert to driver model Jagan Teki
2016-03-15 6:18 ` Jagan Teki
@ 2016-03-15 11:52 ` Tom Rini
1 sibling, 0 replies; 9+ messages in thread
From: Tom Rini @ 2016-03-15 11:52 UTC (permalink / raw)
To: u-boot
On Mon, Mar 14, 2016 at 10:58:01PM +0530, Jagan Teki wrote:
> After this conversion the driver will able to support both dm and non-dm
> and code is more extensible like we can remove the non-dm part simply
> without touching anycode if all the boards which are using this driver
> become dm driven.
>
> Cc: Tom Rini <trini@konsulko.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Acked-by: Christophe Ricard <christophe-h.ricard@st.com>
> Tested-by: Christophe Ricard <christophe-h.ricard@st.com>
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> [Set priv->wordlen, Add Kconfig entry and file credit for dm conversion]
> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160315/85a31010/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2016-03-15 11:52 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-03-14 17:27 [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver Jagan Teki
2016-03-14 17:28 ` [U-Boot] [PATCH v6 2/3] spi: omap3: Make local functions as static Jagan Teki
2016-03-15 6:17 ` Jagan Teki
2016-03-15 11:52 ` Tom Rini
2016-03-14 17:28 ` [U-Boot] [PATCH v6 3/3] spi: omap3: Convert to driver model Jagan Teki
2016-03-15 6:18 ` Jagan Teki
2016-03-15 11:52 ` Tom Rini
2016-03-15 6:16 ` [U-Boot] [PATCH v6 1/3] spi: omap3: Move headers code inside the driver Jagan Teki
2016-03-15 11:52 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.