All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH v2 0/6] ARM: DRA7: Add support for RevH evm
@ 2016-03-08  3:48 Lokesh Vutla
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 1/6] ti: common: dra7: Add standard access for board description EEPROM Lokesh Vutla
                   ` (5 more replies)
  0 siblings, 6 replies; 13+ messages in thread
From: Lokesh Vutla @ 2016-03-08  3:48 UTC (permalink / raw)
  To: u-boot

DRA74-evm RevH and later versions uses 4GB DDR and populates this info
in EEPROM. This series reads EEPROM and populates emif settings for 4GB ddr.
If eeprom is not available or evm revision is < H, then it fall backs to
default emif settings.

This series depends on the ti common eeprom driver series posted recently.
https://www.mail-archive.com/u-boot%40lists.denx.de/msg204549.html

Tested on
DRA7 RevH: http://pastebin.ubuntu.com/15291175/
DRA7 RevG: http://pastebin.ubuntu.com/15291197/

Changes since v1:
- Swapped patch 4 and 5 inorder to maintain bisectability.

Lokesh Vutla (6):
  ti: common: dra7: Add standard access for board description EEPROM
  ARM: DRA7: Enable EEPROM support
  ARM: DRA7: Move emif settings to board specific files
  ARM: DRA7: configs: Prepare for detecting memory > 2GB
  ARM: DRA7: EMIF: Add 4GB DDR settings
  ARM: DRA7-evm: Update memory info in banks

 arch/arm/cpu/armv7/omap5/Kconfig |   1 +
 arch/arm/cpu/armv7/omap5/sdram.c | 149 +--------------------
 board/ti/common/board_detect.c   |  64 +++++++++
 board/ti/common/board_detect.h   |  56 ++++++++
 board/ti/dra7xx/Kconfig          |   3 +
 board/ti/dra7xx/evm.c            | 279 ++++++++++++++++++++++++++++++++++++++-
 include/configs/dra7xx_evm.h     |   9 ++
 7 files changed, 410 insertions(+), 151 deletions(-)

-- 
2.1.4

^ permalink raw reply	[flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v2 1/6] ti: common: dra7: Add standard access for board description EEPROM
  2016-03-08  3:48 [U-Boot] [PATCH v2 0/6] ARM: DRA7: Add support for RevH evm Lokesh Vutla
@ 2016-03-08  3:48 ` Lokesh Vutla
  2016-03-15 11:59   ` [U-Boot] [U-Boot, v2, " Tom Rini
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 2/6] ARM: DRA7: Enable EEPROM support Lokesh Vutla
                   ` (4 subsequent siblings)
  5 siblings, 1 reply; 13+ messages in thread
From: Lokesh Vutla @ 2016-03-08  3:48 UTC (permalink / raw)
  To: u-boot

DRA7 EVM revH and later EVMs have EEPROM populated that can contain board
description information such as name, revision, DDR definition, etc. Adding
support for this EEPROM format.

Acked-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 board/ti/common/board_detect.c | 64 ++++++++++++++++++++++++++++++++++++++++++
 board/ti/common/board_detect.h | 56 ++++++++++++++++++++++++++++++++++++
 2 files changed, 120 insertions(+)

diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c
index 6cf4859..e0ae1a5 100644
--- a/board/ti/common/board_detect.c
+++ b/board/ti/common/board_detect.c
@@ -160,6 +160,50 @@ already_read:
 	return 0;
 }
 
+int __maybe_unused ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr)
+{
+	int rc, offset = 0;
+	struct dra7_eeprom dra7_ep;
+	struct ti_common_eeprom *ep;
+
+	ep = TI_EEPROM_DATA;
+	if (ep->header == DRA7_EEPROM_HEADER_MAGIC)
+		goto already_read;
+
+	/* Initialize with a known bad marker for i2c fails.. */
+	ep->header = 0xADEAD12C;
+	ep->name[0] = 0x0;
+	ep->version[0] = 0x0;
+	ep->serial[0] = 0x0;
+	ep->emif1_size = 0;
+	ep->emif2_size = 0;
+
+	rc = ti_i2c_eeprom_get(bus_addr, dev_addr, DRA7_EEPROM_HEADER_MAGIC,
+			       sizeof(dra7_ep), (uint8_t *)&dra7_ep);
+	if (rc)
+		return rc;
+
+	ep->header = dra7_ep.header;
+	strlcpy(ep->name, dra7_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
+	ti_eeprom_string_cleanup(ep->name);
+
+	offset = dra7_ep.version_major - 1;
+
+	/* Rev F is skipped */
+	if (offset >= 5)
+		offset = offset + 1;
+	snprintf(ep->version, TI_EEPROM_HDR_REV_LEN + 1, "%c.%d",
+		 'A' + offset, dra7_ep.version_minor);
+	ti_eeprom_string_cleanup(ep->version);
+	ep->emif1_size = (u64)dra7_ep.emif1_size;
+	ep->emif2_size = (u64)dra7_ep.emif2_size;
+	strlcpy(ep->config, dra7_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
+	ti_eeprom_string_cleanup(ep->config);
+
+already_read:
+	return 0;
+}
+
 bool __maybe_unused board_ti_is(char *name_tag)
 {
 	struct ti_common_eeprom *ep = TI_EEPROM_DATA;
@@ -230,6 +274,26 @@ fail:
 	memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
 }
 
+u64 __maybe_unused board_ti_get_emif1_size(void)
+{
+	struct ti_common_eeprom *ep = TI_EEPROM_DATA;
+
+	if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
+		return 0;
+
+	return ep->emif1_size;
+}
+
+u64 __maybe_unused board_ti_get_emif2_size(void)
+{
+	struct ti_common_eeprom *ep = TI_EEPROM_DATA;
+
+	if (ep->header != DRA7_EEPROM_HEADER_MAGIC)
+		return 0;
+
+	return ep->emif2_size;
+}
+
 void __maybe_unused set_board_info_env(char *name)
 {
 	char *unknown = "unknown";
diff --git a/board/ti/common/board_detect.h b/board/ti/common/board_detect.h
index c17ab34..eb17f6f 100644
--- a/board/ti/common/board_detect.h
+++ b/board/ti/common/board_detect.h
@@ -44,6 +44,37 @@ struct ti_am_eeprom {
 	char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
 } __attribute__ ((__packed__));
 
+/* DRA7 EEPROM MAGIC Header identifier */
+#define DRA7_EEPROM_HEADER_MAGIC	0xAA5533EE
+#define DRA7_EEPROM_HDR_NAME_LEN	16
+#define DRA7_EEPROM_HDR_CONFIG_LEN	4
+
+/**
+ * struct dra7_eeprom - This structure holds data read in from the DRA7 EVM
+ *			EEPROMs.
+ * @header: This holds the magic number
+ * @name: The name of the board
+ * @version_major: Board major version
+ * @version_minor: Board minor version
+ * @config: Board specific config options
+ * @emif1_size: Size of DDR attached to EMIF1
+ * @emif2_size: Size of DDR attached to EMIF2
+ *
+ * The data is this structure is read from the EEPROM on the board.
+ * It is used for board detection which is based on name. It is used
+ * to configure specific DRA7 boards. This allows booting of multiple
+ * DRA7 boards with a single MLO and u-boot.
+ */
+struct dra7_eeprom {
+	u32 header;
+	char name[DRA7_EEPROM_HDR_NAME_LEN];
+	u16 version_major;
+	u16 version_minor;
+	char config[DRA7_EEPROM_HDR_CONFIG_LEN];
+	u32 emif1_size;
+	u32 emif2_size;
+} __attribute__ ((__packed__));
+
 /**
  * struct ti_common_eeprom - Null terminated, usable EEPROM contents.
  * header:	Magic number
@@ -52,6 +83,8 @@ struct ti_am_eeprom {
  * @serial:	NULL terminated serial number
  * @config:	NULL terminated Board specific config options
  * @mac_addr:	MAC addresses
+ * @emif1_size:	Size of the ddr available on emif1
+ * @emif2_size:	Size of the ddr available on emif2
  */
 struct ti_common_eeprom {
 	u32 header;
@@ -60,6 +93,8 @@ struct ti_common_eeprom {
 	char serial[TI_EEPROM_HDR_SERIAL_LEN + 1];
 	char config[TI_EEPROM_HDR_CONFIG_LEN + 1];
 	char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
+	u64 emif1_size;
+	u64 emif2_size;
 };
 
 #define TI_EEPROM_DATA ((struct ti_common_eeprom *)\
@@ -76,6 +111,13 @@ struct ti_common_eeprom {
 int ti_i2c_eeprom_am_get(int bus_addr, int dev_addr);
 
 /**
+ * ti_i2c_eeprom_dra7_get() - Consolidated eeprom data for DRA7 TI EVMs
+ * @bus_addr:	I2C bus address
+ * @dev_addr:	I2C slave address
+ */
+int ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr);
+
+/**
  * board_ti_is() - Board detection logic for TI EVMs
  * @name_tag:	Tag used in eeprom for the board
  *
@@ -130,6 +172,20 @@ char *board_ti_get_name(void);
 void board_ti_get_eth_mac_addr(int index, u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN]);
 
 /**
+ * board_ti_get_emif1_size() - Get size of the DDR on emif1 for TI EVMs
+ *
+ * Return: NULL if eeprom was'nt read or emif1_size is not available.
+ */
+u64 board_ti_get_emif1_size(void);
+
+/**
+ * board_ti_get_emif2_size() - Get size of the DDR on emif2 for TI EVMs
+ *
+ * Return: NULL if eeprom was'nt read or emif2_size is not available.
+ */
+u64 board_ti_get_emif2_size(void);
+
+/**
  * set_board_info_env() - Setup commonly used board information environment vars
  * @name:	Name of the board
  *
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v2 2/6] ARM: DRA7: Enable EEPROM support
  2016-03-08  3:48 [U-Boot] [PATCH v2 0/6] ARM: DRA7: Add support for RevH evm Lokesh Vutla
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 1/6] ti: common: dra7: Add standard access for board description EEPROM Lokesh Vutla
@ 2016-03-08  3:48 ` Lokesh Vutla
  2016-03-15 12:00   ` [U-Boot] [U-Boot,v2,2/6] " Tom Rini
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 3/6] ARM: DRA7: Move emif settings to board specific files Lokesh Vutla
                   ` (3 subsequent siblings)
  5 siblings, 1 reply; 13+ messages in thread
From: Lokesh Vutla @ 2016-03-08  3:48 UTC (permalink / raw)
  To: u-boot

Enable EEPROM support for DRA74-evm.

Acked-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/cpu/armv7/omap5/Kconfig |  1 +
 board/ti/dra7xx/Kconfig          |  3 ++
 board/ti/dra7xx/evm.c            | 59 +++++++++++++++++++++++++++++++++++++---
 include/configs/dra7xx_evm.h     |  4 +++
 4 files changed, 63 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap5/Kconfig b/arch/arm/cpu/armv7/omap5/Kconfig
index f265b34..026bf24 100644
--- a/arch/arm/cpu/armv7/omap5/Kconfig
+++ b/arch/arm/cpu/armv7/omap5/Kconfig
@@ -12,6 +12,7 @@ config TARGET_OMAP5_UEVM
 
 config TARGET_DRA7XX_EVM
 	bool "TI DRA7XX"
+	select TI_I2C_BOARD_DETECT
 
 config TARGET_BEAGLE_X15
 	bool "BeagleBoard X15"
diff --git a/board/ti/dra7xx/Kconfig b/board/ti/dra7xx/Kconfig
index 80341d9..b642113 100644
--- a/board/ti/dra7xx/Kconfig
+++ b/board/ti/dra7xx/Kconfig
@@ -17,4 +17,7 @@ config CONS_INDEX
 	  The DRA7xx (and AM57x) SoC has a total of 6 UARTs available to it.
 	  Depending on your specific board you may want something other than UART1
 	  here.
+
+source "board/ti/common/Kconfig"
+
 endif
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index eebec88..a47122b 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -13,6 +13,7 @@
 #include <common.h>
 #include <palmas.h>
 #include <sata.h>
+#include <linux/string.h>
 #include <asm/gpio.h>
 #include <usb.h>
 #include <linux/usb/gadget.h>
@@ -27,6 +28,11 @@
 #include <ti-usb-phy-uboot.h>
 
 #include "mux_data.h"
+#include "../common/board_detect.h"
+
+#define board_is_dra74x_evm()		board_ti_is("5777xCPU")
+#define board_is_dra74x_revh_or_later() board_is_dra74x_evm() &&	\
+				(strncmp("H", board_ti_get_rev(), 1) <= 0)
 
 #ifdef CONFIG_DRIVER_TI_CPSW
 #include <cpsw.h>
@@ -37,8 +43,10 @@ DECLARE_GLOBAL_DATA_PTR;
 /* GPIO 7_11 */
 #define GPIO_DDR_VTT_EN 203
 
+#define SYSINFO_BOARD_NAME_MAX_LEN	37
+
 const struct omap_sysinfo sysinfo = {
-	"Board: DRA7xx\n"
+	"Board: UNKNOWN(DRA7 EVM) REV UNKNOWN\n"
 };
 
 /**
@@ -57,16 +65,59 @@ int board_init(void)
 int board_late_init(void)
 {
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-	if (omap_revision() == DRA722_ES1_0)
-		setenv("board_name", "dra72x");
+	char *name = "unknown";
+
+	if (is_dra72x())
+		name = "dra72x";
 	else
-		setenv("board_name", "dra7xx");
+		name = "dra7xx";
+
+	set_board_info_env(name);
 
 	omap_die_id_serial();
 #endif
 	return 0;
 }
 
+#ifdef CONFIG_SPL_BUILD
+void do_board_detect(void)
+{
+	int rc;
+
+	rc = ti_i2c_eeprom_dra7_get(CONFIG_EEPROM_BUS_ADDRESS,
+				    CONFIG_EEPROM_CHIP_ADDRESS);
+	if (rc)
+		printf("ti_i2c_eeprom_init failed %d\n", rc);
+}
+
+#else
+
+void do_board_detect(void)
+{
+	char *bname = NULL;
+	int rc;
+
+	rc = ti_i2c_eeprom_dra7_get(CONFIG_EEPROM_BUS_ADDRESS,
+				    CONFIG_EEPROM_CHIP_ADDRESS);
+	if (rc)
+		printf("ti_i2c_eeprom_init failed %d\n", rc);
+
+	if (board_is_dra74x_evm()) {
+		bname = "DRA74x EVM";
+	/* If EEPROM is not populated */
+	} else {
+		if (is_dra72x())
+			bname = "DRA72x EVM";
+		else
+			bname = "DRA74x EVM";
+	}
+
+	if (bname)
+		snprintf(sysinfo.board_string, SYSINFO_BOARD_NAME_MAX_LEN,
+			 "Board: %s REV %s\n", bname, board_ti_get_rev());
+}
+#endif	/* CONFIG_SPL_BUILD */
+
 void set_muxconf_regs_essential(void)
 {
 	do_set_mux32((*ctrl)->control_padconf_core_base,
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 0196280..e79250b 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -341,4 +341,8 @@
 #endif
 #endif  /* NOR support */
 
+/* EEPROM */
+#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
+#define CONFIG_EEPROM_BUS_ADDRESS 0
+
 #endif /* __CONFIG_DRA7XX_EVM_H */
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v2 3/6] ARM: DRA7: Move emif settings to board specific files
  2016-03-08  3:48 [U-Boot] [PATCH v2 0/6] ARM: DRA7: Add support for RevH evm Lokesh Vutla
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 1/6] ti: common: dra7: Add standard access for board description EEPROM Lokesh Vutla
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 2/6] ARM: DRA7: Enable EEPROM support Lokesh Vutla
@ 2016-03-08  3:48 ` Lokesh Vutla
  2016-03-15 12:00   ` [U-Boot] [U-Boot, v2, " Tom Rini
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 4/6] ARM: DRA7: configs: Prepare for detecting memory > 2GB Lokesh Vutla
                   ` (2 subsequent siblings)
  5 siblings, 1 reply; 13+ messages in thread
From: Lokesh Vutla @ 2016-03-08  3:48 UTC (permalink / raw)
  To: u-boot

The newer versions of DRA7 boards has EEPROM populated with DDR
size specified in it. Moving DRA7 specific emif related settings
to board files so that emif settings can be identified based on EEPROM.

Acked-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/cpu/armv7/omap5/sdram.c | 149 +--------------------------------------
 board/ti/dra7xx/evm.c            | 129 +++++++++++++++++++++++++++++++++
 2 files changed, 131 insertions(+), 147 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index c386e64..7dc5bb7 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -137,81 +137,6 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = {
 	.emif_rd_wr_exec_thresh         = 0x40000305
 };
 
-const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = {
-	.sdram_config_init              = 0x61851ab2,
-	.sdram_config                   = 0x61851ab2,
-	.sdram_config2			= 0x08000000,
-	.ref_ctrl                       = 0x000040F1,
-	.ref_ctrl_final			= 0x00001035,
-	.sdram_tim1                     = 0xCCCF36B3,
-	.sdram_tim2                     = 0x308F7FDA,
-	.sdram_tim3                     = 0x027F88A8,
-	.read_idle_ctrl                 = 0x00050000,
-	.zq_config                      = 0x0007190B,
-	.temp_alert_config              = 0x00000000,
-	.emif_ddr_phy_ctlr_1_init       = 0x0024400B,
-	.emif_ddr_phy_ctlr_1            = 0x0E24400B,
-	.emif_ddr_ext_phy_ctrl_1        = 0x10040100,
-	.emif_ddr_ext_phy_ctrl_2        = 0x00910091,
-	.emif_ddr_ext_phy_ctrl_3        = 0x00950095,
-	.emif_ddr_ext_phy_ctrl_4        = 0x009B009B,
-	.emif_ddr_ext_phy_ctrl_5        = 0x009E009E,
-	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
-	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
-	.emif_rd_wr_lvl_ctl             = 0x00000000,
-	.emif_rd_wr_exec_thresh         = 0x00000305
-};
-
-const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = {
-	.sdram_config_init              = 0x61851B32,
-	.sdram_config                   = 0x61851B32,
-	.sdram_config2			= 0x08000000,
-	.ref_ctrl                       = 0x000040F1,
-	.ref_ctrl_final			= 0x00001035,
-	.sdram_tim1                     = 0xCCCF36B3,
-	.sdram_tim2                     = 0x308F7FDA,
-	.sdram_tim3                     = 0x027F88A8,
-	.read_idle_ctrl                 = 0x00050000,
-	.zq_config                      = 0x0007190B,
-	.temp_alert_config              = 0x00000000,
-	.emif_ddr_phy_ctlr_1_init       = 0x0024400B,
-	.emif_ddr_phy_ctlr_1            = 0x0E24400B,
-	.emif_ddr_ext_phy_ctrl_1        = 0x10040100,
-	.emif_ddr_ext_phy_ctrl_2        = 0x00910091,
-	.emif_ddr_ext_phy_ctrl_3        = 0x00950095,
-	.emif_ddr_ext_phy_ctrl_4        = 0x009B009B,
-	.emif_ddr_ext_phy_ctrl_5        = 0x009E009E,
-	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
-	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
-	.emif_rd_wr_lvl_ctl             = 0x00000000,
-	.emif_rd_wr_exec_thresh         = 0x00000305
-};
-
-const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = {
-	.sdram_config_init              = 0x61862B32,
-	.sdram_config                   = 0x61862B32,
-	.sdram_config2			= 0x08000000,
-	.ref_ctrl                       = 0x0000514C,
-	.ref_ctrl_final			= 0x0000144A,
-	.sdram_tim1                     = 0xD113781C,
-	.sdram_tim2                     = 0x305A7FDA,
-	.sdram_tim3                     = 0x409F86A8,
-	.read_idle_ctrl                 = 0x00050000,
-	.zq_config                      = 0x5007190B,
-	.temp_alert_config              = 0x00000000,
-	.emif_ddr_phy_ctlr_1_init       = 0x0024400D,
-	.emif_ddr_phy_ctlr_1            = 0x0E24400D,
-	.emif_ddr_ext_phy_ctrl_1        = 0x10040100,
-	.emif_ddr_ext_phy_ctrl_2        = 0x00A400A4,
-	.emif_ddr_ext_phy_ctrl_3        = 0x00A900A9,
-	.emif_ddr_ext_phy_ctrl_4        = 0x00B000B0,
-	.emif_ddr_ext_phy_ctrl_5        = 0x00B000B0,
-	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
-	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
-	.emif_rd_wr_lvl_ctl             = 0x00000000,
-	.emif_rd_wr_exec_thresh         = 0x00000305
-};
-
 const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
 	.dmm_lisa_map_0 = 0x0,
 	.dmm_lisa_map_1 = 0x0,
@@ -220,53 +145,6 @@ const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
 	.is_ma_present	= 0x1
 };
 
-/*
- * DRA752 EVM board has 1.5 GB of memory
- * EMIF1 --> 2Gb * 2 =  512MB
- * EMIF2 --> 2Gb * 4 =  1GB
- * so mapping 1GB interleaved and 512MB non-interleaved
- */
-const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2_2G_x_1_x_2 = {
-	.dmm_lisa_map_0 = 0x0,
-	.dmm_lisa_map_1 = 0x80640300,
-	.dmm_lisa_map_2 = 0xC0500220,
-	.dmm_lisa_map_3 = 0xFF020100,
-	.is_ma_present	= 0x1
-};
-
-/*
- * DRA752 EVM EMIF1 ONLY CONFIGURATION
- */
-const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = {
-	.dmm_lisa_map_0 = 0x0,
-	.dmm_lisa_map_1 = 0x0,
-	.dmm_lisa_map_2 = 0x80500100,
-	.dmm_lisa_map_3 = 0xFF020100,
-	.is_ma_present	= 0x1
-};
-
-/*
- * DRA752 EVM EMIF2 ONLY CONFIGURATION
- */
-const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = {
-	.dmm_lisa_map_0 = 0x0,
-	.dmm_lisa_map_1 = 0x0,
-	.dmm_lisa_map_2 = 0x80600200,
-	.dmm_lisa_map_3 = 0xFF020100,
-	.is_ma_present	= 0x1
-};
-
-/*
- * DRA722 EVM EMIF1 CONFIGURATION
- */
-const struct dmm_lisa_map_regs lisa_map_2G_x_2 = {
-	.dmm_lisa_map_0 = 0x0,
-	.dmm_lisa_map_1 = 0x0,
-	.dmm_lisa_map_2 = 0x80600100,
-	.dmm_lisa_map_3 = 0xFF020100,
-	.is_ma_present	= 0x1
-};
-
 static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
 {
 	switch (omap_revision()) {
@@ -280,25 +158,9 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
 		*regs = &emif_regs_532_mhz_2cs_es2;
 		break;
 	case OMAP5432_ES2_0:
+	default:
 		*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
 		break;
-	case DRA752_ES1_0:
-	case DRA752_ES1_1:
-	case DRA752_ES2_0:
-		switch (emif_nr) {
-		case 1:
-			*regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
-			break;
-		case 2:
-			*regs = &emif_2_regs_ddr3_532_mhz_1cs_dra_es1;
-			break;
-		}
-		break;
-	case DRA722_ES1_0:
-		*regs = &emif_1_regs_ddr3_666_mhz_1cs_dra_es1;
-		break;
-	default:
-		*regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
 	}
 }
 
@@ -313,16 +175,9 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
 	case OMAP5430_ES2_0:
 	case OMAP5432_ES1_0:
 	case OMAP5432_ES2_0:
+	default:
 		*dmm_lisa_regs = &lisa_map_4G_x_2_x_2;
 		break;
-	case DRA752_ES1_0:
-	case DRA752_ES1_1:
-	case DRA752_ES2_0:
-		*dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2;
-		break;
-	case DRA722_ES1_0:
-	default:
-		*dmm_lisa_regs = &lisa_map_2G_x_2;
 	}
 
 }
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index a47122b..c493c64 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -19,6 +19,7 @@
 #include <linux/usb/gadget.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/dra7xx_iodelay.h>
+#include <asm/emif.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/sata.h>
@@ -49,6 +50,134 @@ const struct omap_sysinfo sysinfo = {
 	"Board: UNKNOWN(DRA7 EVM) REV UNKNOWN\n"
 };
 
+static const struct emif_regs emif1_ddr3_532_mhz_1cs = {
+	.sdram_config_init              = 0x61851ab2,
+	.sdram_config                   = 0x61851ab2,
+	.sdram_config2			= 0x08000000,
+	.ref_ctrl                       = 0x000040F1,
+	.ref_ctrl_final			= 0x00001035,
+	.sdram_tim1                     = 0xCCCF36B3,
+	.sdram_tim2                     = 0x308F7FDA,
+	.sdram_tim3                     = 0x427F88A8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x0007190B,
+	.temp_alert_config              = 0x00000000,
+	.emif_ddr_phy_ctlr_1_init       = 0x0024400B,
+	.emif_ddr_phy_ctlr_1            = 0x0E24400B,
+	.emif_ddr_ext_phy_ctrl_1        = 0x10040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x00910091,
+	.emif_ddr_ext_phy_ctrl_3        = 0x00950095,
+	.emif_ddr_ext_phy_ctrl_4        = 0x009B009B,
+	.emif_ddr_ext_phy_ctrl_5        = 0x009E009E,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x00000305
+};
+
+static const struct emif_regs emif2_ddr3_532_mhz_1cs = {
+	.sdram_config_init              = 0x61851B32,
+	.sdram_config                   = 0x61851B32,
+	.sdram_config2			= 0x08000000,
+	.ref_ctrl                       = 0x000040F1,
+	.ref_ctrl_final			= 0x00001035,
+	.sdram_tim1                     = 0xCCCF36B3,
+	.sdram_tim2                     = 0x308F7FDA,
+	.sdram_tim3                     = 0x427F88A8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x0007190B,
+	.temp_alert_config              = 0x00000000,
+	.emif_ddr_phy_ctlr_1_init       = 0x0024400B,
+	.emif_ddr_phy_ctlr_1            = 0x0E24400B,
+	.emif_ddr_ext_phy_ctrl_1        = 0x10040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x00910091,
+	.emif_ddr_ext_phy_ctrl_3        = 0x00950095,
+	.emif_ddr_ext_phy_ctrl_4        = 0x009B009B,
+	.emif_ddr_ext_phy_ctrl_5        = 0x009E009E,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x00000305
+};
+
+static const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = {
+	.sdram_config_init              = 0x61862B32,
+	.sdram_config                   = 0x61862B32,
+	.sdram_config2			= 0x08000000,
+	.ref_ctrl                       = 0x0000514C,
+	.ref_ctrl_final			= 0x0000144A,
+	.sdram_tim1                     = 0xD113781C,
+	.sdram_tim2                     = 0x30717FE3,
+	.sdram_tim3                     = 0x409F86A8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x5007190B,
+	.temp_alert_config              = 0x00000000,
+	.emif_ddr_phy_ctlr_1_init       = 0x0024400D,
+	.emif_ddr_phy_ctlr_1            = 0x0E24400D,
+	.emif_ddr_ext_phy_ctrl_1        = 0x10040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x00A400A4,
+	.emif_ddr_ext_phy_ctrl_3        = 0x00A900A9,
+	.emif_ddr_ext_phy_ctrl_4        = 0x00B000B0,
+	.emif_ddr_ext_phy_ctrl_5        = 0x00B000B0,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x00000305
+};
+
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+{
+	switch (omap_revision()) {
+	case DRA752_ES1_0:
+	case DRA752_ES1_1:
+	case DRA752_ES2_0:
+		switch (emif_nr) {
+		case 1:
+			*regs = &emif1_ddr3_532_mhz_1cs;
+			break;
+		case 2:
+			*regs = &emif2_ddr3_532_mhz_1cs;
+			break;
+		}
+		break;
+	case DRA722_ES1_0:
+		*regs = &emif_1_regs_ddr3_666_mhz_1cs_dra_es1;
+		break;
+	default:
+		*regs = &emif1_ddr3_532_mhz_1cs;
+	}
+}
+
+static const struct dmm_lisa_map_regs lisa_map_dra7_1536MB = {
+	.dmm_lisa_map_0 = 0x0,
+	.dmm_lisa_map_1 = 0x80640300,
+	.dmm_lisa_map_2 = 0xC0500220,
+	.dmm_lisa_map_3 = 0xFF020100,
+	.is_ma_present	= 0x1
+};
+
+static const struct dmm_lisa_map_regs lisa_map_2G_x_2 = {
+	.dmm_lisa_map_0 = 0x0,
+	.dmm_lisa_map_1 = 0x0,
+	.dmm_lisa_map_2 = 0x80600100,
+	.dmm_lisa_map_3 = 0xFF020100,
+	.is_ma_present	= 0x1
+};
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+{
+	switch (omap_revision()) {
+	case DRA752_ES1_0:
+	case DRA752_ES1_1:
+	case DRA752_ES2_0:
+		*dmm_lisa_regs = &lisa_map_dra7_1536MB;
+		break;
+	case DRA722_ES1_0:
+	default:
+		*dmm_lisa_regs = &lisa_map_2G_x_2;
+	}
+}
+
 /**
  * @brief board_init
  *
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v2 4/6] ARM: DRA7: configs: Prepare for detecting memory > 2GB
  2016-03-08  3:48 [U-Boot] [PATCH v2 0/6] ARM: DRA7: Add support for RevH evm Lokesh Vutla
                   ` (2 preceding siblings ...)
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 3/6] ARM: DRA7: Move emif settings to board specific files Lokesh Vutla
@ 2016-03-08  3:48 ` Lokesh Vutla
  2016-03-15 12:00   ` [U-Boot] [U-Boot, v2, " Tom Rini
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 5/6] ARM: DRA7: EMIF: Add 4GB DDR settings Lokesh Vutla
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 6/6] ARM: DRA7-evm: Update memory info in banks Lokesh Vutla
  5 siblings, 1 reply; 13+ messages in thread
From: Lokesh Vutla @ 2016-03-08  3:48 UTC (permalink / raw)
  To: u-boot

Enable configs that are required for detecting memory > 2GB.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 include/configs/dra7xx_evm.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index e79250b..45bda4f 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -19,6 +19,11 @@
 #define CONFIG_IODELAY_RECALIBRATION
 #endif
 
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_PHYS_64BIT
+#define CONFIG_NR_DRAM_BANKS		2
+#define CONFIG_MAX_MEM_MAPPED		0x80000000
+
 #ifndef CONFIG_QSPI_BOOT
 /* MMC ENV related defines */
 #define CONFIG_ENV_IS_IN_MMC
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v2 5/6] ARM: DRA7: EMIF: Add 4GB DDR settings
  2016-03-08  3:48 [U-Boot] [PATCH v2 0/6] ARM: DRA7: Add support for RevH evm Lokesh Vutla
                   ` (3 preceding siblings ...)
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 4/6] ARM: DRA7: configs: Prepare for detecting memory > 2GB Lokesh Vutla
@ 2016-03-08  3:48 ` Lokesh Vutla
  2016-03-15 12:00   ` [U-Boot] [U-Boot,v2,5/6] " Tom Rini
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 6/6] ARM: DRA7-evm: Update memory info in banks Lokesh Vutla
  5 siblings, 1 reply; 13+ messages in thread
From: Lokesh Vutla @ 2016-03-08  3:48 UTC (permalink / raw)
  To: u-boot

The REVH and later versions of DRA7-evm uses MICRON MT41K512M16HA-125 memory
chips which is of size 4GB(2GB on EMIF1 and 2GB on EMIF2). Add support for the
same.

Acked-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 board/ti/dra7xx/evm.c | 83 +++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 80 insertions(+), 3 deletions(-)

diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index c493c64..d142ccc 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -34,6 +34,8 @@
 #define board_is_dra74x_evm()		board_ti_is("5777xCPU")
 #define board_is_dra74x_revh_or_later() board_is_dra74x_evm() &&	\
 				(strncmp("H", board_ti_get_rev(), 1) <= 0)
+#define board_ti_get_emif_size()	board_ti_get_emif1_size() +	\
+					board_ti_get_emif2_size()
 
 #ifdef CONFIG_DRIVER_TI_CPSW
 #include <cpsw.h>
@@ -125,18 +127,78 @@ static const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = {
 	.emif_rd_wr_exec_thresh         = 0x00000305
 };
 
+const struct emif_regs emif1_ddr3_532_mhz_1cs_2G = {
+	.sdram_config_init              = 0x61851ab2,
+	.sdram_config                   = 0x61851ab2,
+	.sdram_config2			= 0x08000000,
+	.ref_ctrl                       = 0x000040F1,
+	.ref_ctrl_final			= 0x00001035,
+	.sdram_tim1                     = 0xCCCF36B3,
+	.sdram_tim2                     = 0x30BF7FDA,
+	.sdram_tim3                     = 0x427F8BA8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x0007190B,
+	.temp_alert_config              = 0x00000000,
+	.emif_ddr_phy_ctlr_1_init       = 0x0024400B,
+	.emif_ddr_phy_ctlr_1            = 0x0E24400B,
+	.emif_ddr_ext_phy_ctrl_1        = 0x10040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x00910091,
+	.emif_ddr_ext_phy_ctrl_3        = 0x00950095,
+	.emif_ddr_ext_phy_ctrl_4        = 0x009B009B,
+	.emif_ddr_ext_phy_ctrl_5        = 0x009E009E,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x00000305
+};
+
+const struct emif_regs emif2_ddr3_532_mhz_1cs_2G = {
+	.sdram_config_init              = 0x61851B32,
+	.sdram_config                   = 0x61851B32,
+	.sdram_config2			= 0x08000000,
+	.ref_ctrl                       = 0x000040F1,
+	.ref_ctrl_final			= 0x00001035,
+	.sdram_tim1                     = 0xCCCF36B3,
+	.sdram_tim2                     = 0x308F7FDA,
+	.sdram_tim3                     = 0x427F88A8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x0007190B,
+	.temp_alert_config              = 0x00000000,
+	.emif_ddr_phy_ctlr_1_init       = 0x0024400B,
+	.emif_ddr_phy_ctlr_1            = 0x0E24400B,
+	.emif_ddr_ext_phy_ctrl_1        = 0x10040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x00910091,
+	.emif_ddr_ext_phy_ctrl_3        = 0x00950095,
+	.emif_ddr_ext_phy_ctrl_4        = 0x009B009B,
+	.emif_ddr_ext_phy_ctrl_5        = 0x009E009E,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x00000305
+};
+
 void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
 {
+	u64 ram_size;
+
+	ram_size = board_ti_get_emif_size();
+
 	switch (omap_revision()) {
 	case DRA752_ES1_0:
 	case DRA752_ES1_1:
 	case DRA752_ES2_0:
 		switch (emif_nr) {
 		case 1:
-			*regs = &emif1_ddr3_532_mhz_1cs;
+			if (ram_size > CONFIG_MAX_MEM_MAPPED)
+				*regs = &emif1_ddr3_532_mhz_1cs_2G;
+			else
+				*regs = &emif1_ddr3_532_mhz_1cs;
 			break;
 		case 2:
-			*regs = &emif2_ddr3_532_mhz_1cs;
+			if (ram_size > CONFIG_MAX_MEM_MAPPED)
+				*regs = &emif2_ddr3_532_mhz_1cs_2G;
+			else
+				*regs = &emif2_ddr3_532_mhz_1cs;
 			break;
 		}
 		break;
@@ -164,13 +226,28 @@ static const struct dmm_lisa_map_regs lisa_map_2G_x_2 = {
 	.is_ma_present	= 0x1
 };
 
+const struct dmm_lisa_map_regs lisa_map_dra7_2GB = {
+	.dmm_lisa_map_0 = 0x0,
+	.dmm_lisa_map_1 = 0x0,
+	.dmm_lisa_map_2 = 0x80740300,
+	.dmm_lisa_map_3 = 0xFF020100,
+	.is_ma_present	= 0x1
+};
+
 void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
 {
+	u64 ram_size;
+
+	ram_size = board_ti_get_emif_size();
+
 	switch (omap_revision()) {
 	case DRA752_ES1_0:
 	case DRA752_ES1_1:
 	case DRA752_ES2_0:
-		*dmm_lisa_regs = &lisa_map_dra7_1536MB;
+		if (ram_size > CONFIG_MAX_MEM_MAPPED)
+			*dmm_lisa_regs = &lisa_map_dra7_2GB;
+		else
+			*dmm_lisa_regs = &lisa_map_dra7_1536MB;
 		break;
 	case DRA722_ES1_0:
 	default:
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [U-Boot] [PATCH v2 6/6] ARM: DRA7-evm: Update memory info in banks
  2016-03-08  3:48 [U-Boot] [PATCH v2 0/6] ARM: DRA7: Add support for RevH evm Lokesh Vutla
                   ` (4 preceding siblings ...)
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 5/6] ARM: DRA7: EMIF: Add 4GB DDR settings Lokesh Vutla
@ 2016-03-08  3:48 ` Lokesh Vutla
  2016-03-15 12:00   ` [U-Boot] [U-Boot, v2, " Tom Rini
  5 siblings, 1 reply; 13+ messages in thread
From: Lokesh Vutla @ 2016-03-08  3:48 UTC (permalink / raw)
  To: u-boot

Updating the memory banks properly so that DT is populated accordingly.
And updating this only after DDR is properly detected by eeprom, so that
git bisect is still maintained.

Acked-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 board/ti/dra7xx/evm.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index d142ccc..4c6dfa0 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -268,6 +268,20 @@ int board_init(void)
 	return 0;
 }
 
+void dram_init_banksize(void)
+{
+	u64 ram_size;
+
+	ram_size = board_ti_get_emif_size();
+
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = get_effective_memsize();
+	if (ram_size > CONFIG_MAX_MEM_MAPPED) {
+		gd->bd->bi_dram[1].start = 0x200000000;
+		gd->bd->bi_dram[1].size = ram_size - CONFIG_MAX_MEM_MAPPED;
+	}
+}
+
 int board_late_init(void)
 {
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [U-Boot] [U-Boot, v2, 1/6] ti: common: dra7: Add standard access for board description EEPROM
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 1/6] ti: common: dra7: Add standard access for board description EEPROM Lokesh Vutla
@ 2016-03-15 11:59   ` Tom Rini
  0 siblings, 0 replies; 13+ messages in thread
From: Tom Rini @ 2016-03-15 11:59 UTC (permalink / raw)
  To: u-boot

On Tue, Mar 08, 2016 at 09:18:04AM +0530, Lokesh Vutla wrote:

> DRA7 EVM revH and later EVMs have EEPROM populated that can contain board
> description information such as name, revision, DDR definition, etc. Adding
> support for this EEPROM format.
> 
> Acked-by: Nishanth Menon <nm@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160315/8f9c75bd/attachment.sig>

^ permalink raw reply	[flat|nested] 13+ messages in thread
* [U-Boot] [U-Boot,v2,2/6] ARM: DRA7: Enable EEPROM support
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 2/6] ARM: DRA7: Enable EEPROM support Lokesh Vutla
@ 2016-03-15 12:00   ` Tom Rini
  0 siblings, 0 replies; 13+ messages in thread
From: Tom Rini @ 2016-03-15 12:00 UTC (permalink / raw)
  To: u-boot

On Tue, Mar 08, 2016 at 09:18:05AM +0530, Lokesh Vutla wrote:

> Enable EEPROM support for DRA74-evm.
> 
> Acked-by: Nishanth Menon <nm@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160315/937705de/attachment.sig>

^ permalink raw reply	[flat|nested] 13+ messages in thread
* [U-Boot] [U-Boot, v2, 3/6] ARM: DRA7: Move emif settings to board specific files
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 3/6] ARM: DRA7: Move emif settings to board specific files Lokesh Vutla
@ 2016-03-15 12:00   ` Tom Rini
  0 siblings, 0 replies; 13+ messages in thread
From: Tom Rini @ 2016-03-15 12:00 UTC (permalink / raw)
  To: u-boot

On Tue, Mar 08, 2016 at 09:18:06AM +0530, Lokesh Vutla wrote:

> The newer versions of DRA7 boards has EEPROM populated with DDR
> size specified in it. Moving DRA7 specific emif related settings
> to board files so that emif settings can be identified based on EEPROM.
> 
> Acked-by: Nishanth Menon <nm@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160315/8c9cc7a3/attachment.sig>

^ permalink raw reply	[flat|nested] 13+ messages in thread
* [U-Boot] [U-Boot, v2, 4/6] ARM: DRA7: configs: Prepare for detecting memory > 2GB
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 4/6] ARM: DRA7: configs: Prepare for detecting memory > 2GB Lokesh Vutla
@ 2016-03-15 12:00   ` Tom Rini
  0 siblings, 0 replies; 13+ messages in thread
From: Tom Rini @ 2016-03-15 12:00 UTC (permalink / raw)
  To: u-boot

On Tue, Mar 08, 2016 at 09:18:07AM +0530, Lokesh Vutla wrote:

> Enable configs that are required for detecting memory > 2GB.
> 
> Reviewed-by: Tom Rini <trini@konsulko.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160315/61654c21/attachment.sig>

^ permalink raw reply	[flat|nested] 13+ messages in thread
* [U-Boot] [U-Boot,v2,5/6] ARM: DRA7: EMIF: Add 4GB DDR settings
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 5/6] ARM: DRA7: EMIF: Add 4GB DDR settings Lokesh Vutla
@ 2016-03-15 12:00   ` Tom Rini
  0 siblings, 0 replies; 13+ messages in thread
From: Tom Rini @ 2016-03-15 12:00 UTC (permalink / raw)
  To: u-boot

On Tue, Mar 08, 2016 at 09:18:08AM +0530, Lokesh Vutla wrote:

> The REVH and later versions of DRA7-evm uses MICRON MT41K512M16HA-125 memory
> chips which is of size 4GB(2GB on EMIF1 and 2GB on EMIF2). Add support for the
> same.
> 
> Acked-by: Nishanth Menon <nm@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160315/13342c49/attachment.sig>

^ permalink raw reply	[flat|nested] 13+ messages in thread
* [U-Boot] [U-Boot, v2, 6/6] ARM: DRA7-evm: Update memory info in banks
  2016-03-08  3:48 ` [U-Boot] [PATCH v2 6/6] ARM: DRA7-evm: Update memory info in banks Lokesh Vutla
@ 2016-03-15 12:00   ` Tom Rini
  0 siblings, 0 replies; 13+ messages in thread
From: Tom Rini @ 2016-03-15 12:00 UTC (permalink / raw)
  To: u-boot

On Tue, Mar 08, 2016 at 09:18:09AM +0530, Lokesh Vutla wrote:

> Updating the memory banks properly so that DT is populated accordingly.
> And updating this only after DDR is properly detected by eeprom, so that
> git bisect is still maintained.
> 
> Acked-by: Nishanth Menon <nm@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160315/39f62739/attachment.sig>

^ permalink raw reply	[flat|nested] 13+ messages in thread
end of thread, other threads:[~2016-03-15 12:00 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-03-08  3:48 [U-Boot] [PATCH v2 0/6] ARM: DRA7: Add support for RevH evm Lokesh Vutla
2016-03-08  3:48 ` [U-Boot] [PATCH v2 1/6] ti: common: dra7: Add standard access for board description EEPROM Lokesh Vutla
2016-03-15 11:59   ` [U-Boot] [U-Boot, v2, " Tom Rini
2016-03-08  3:48 ` [U-Boot] [PATCH v2 2/6] ARM: DRA7: Enable EEPROM support Lokesh Vutla
2016-03-15 12:00   ` [U-Boot] [U-Boot,v2,2/6] " Tom Rini
2016-03-08  3:48 ` [U-Boot] [PATCH v2 3/6] ARM: DRA7: Move emif settings to board specific files Lokesh Vutla
2016-03-15 12:00   ` [U-Boot] [U-Boot, v2, " Tom Rini
2016-03-08  3:48 ` [U-Boot] [PATCH v2 4/6] ARM: DRA7: configs: Prepare for detecting memory > 2GB Lokesh Vutla
2016-03-15 12:00   ` [U-Boot] [U-Boot, v2, " Tom Rini
2016-03-08  3:48 ` [U-Boot] [PATCH v2 5/6] ARM: DRA7: EMIF: Add 4GB DDR settings Lokesh Vutla
2016-03-15 12:00   ` [U-Boot] [U-Boot,v2,5/6] " Tom Rini
2016-03-08  3:48 ` [U-Boot] [PATCH v2 6/6] ARM: DRA7-evm: Update memory info in banks Lokesh Vutla
2016-03-15 12:00   ` [U-Boot] [U-Boot, v2, " Tom Rini

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.