* [PATCH 0/4 v3] drm: Introduce drm_connector_register_all() helper
@ 2016-03-23 8:42 Alexey Brodkin
2016-03-23 8:42 ` [PATCH 1/4 v3] drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all() Alexey Brodkin
` (4 more replies)
0 siblings, 5 replies; 17+ messages in thread
From: Alexey Brodkin @ 2016-03-23 8:42 UTC (permalink / raw)
To: dri-devel
Cc: linux-kernel, Alexey Brodkin, Daniel Vetter, David Airlie,
Boris Brezillon, Laurent Pinchart, linux-renesas-soc
As a pair to already existing drm_connector_unplug_all()
(which we'll rename in this series to drm_connector_unregister_all())
we're adding generic implementation of what is already done in some drivers
for registering all connectors.
After implementation of that new helper we're updating 2 drivers
that used to use it's own implementation:
[1] atmel_hlcdc
[2] rcar_du
And one driver that uses unregister():
[1] udl
Other drivers still use load() callback and so should be first modified so
their load() gets called from their probe() explicitly.
Build- and run-tested on yet to be upstreamed ARC PGU (part of AXS10x board).
Changes v2 -> v3:
* Added acks for 1, 3 and 4 patches
* Updated kerneldoc descriptins of both register_ and unregister_all()
* Updated commit messages (mostly spellos and grammar issues)
Changes v1 -> v2:
* Rename drm_connector_unplug_all() to drm_connector_unregister_all()
* Use drm_for_each_connector() instead of list_for_each_entry()
* Updated kerneldoc for drm_dev_register()
Alexey Brodkin (4):
drm: Rename drm_connector_unplug_all() to
drm_connector_unregister_all()
drm: Introduce drm_connector_register_all() helper
drm: atmel_hldc: Use generic drm_connector_register_all() helper
drm: rcar-du: Use generic drm_connector_register_all() helper
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 39 +-----------------
drivers/gpu/drm/drm_crtc.c | 59 ++++++++++++++++++++++++----
drivers/gpu/drm/drm_drv.c | 6 ++-
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 14 +------
drivers/gpu/drm/udl/udl_drv.c | 2 +-
include/drm/drm_crtc.h | 5 ++-
6 files changed, 64 insertions(+), 61 deletions(-)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
--
2.5.0
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 1/4 v3] drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all()
2016-03-23 8:42 [PATCH 0/4 v3] drm: Introduce drm_connector_register_all() helper Alexey Brodkin
@ 2016-03-23 8:42 ` Alexey Brodkin
2016-03-23 9:02 ` Boris Brezillon
2016-03-23 8:42 ` [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper Alexey Brodkin
` (3 subsequent siblings)
4 siblings, 1 reply; 17+ messages in thread
From: Alexey Brodkin @ 2016-03-23 8:42 UTC (permalink / raw)
To: dri-devel
Cc: linux-kernel, Alexey Brodkin, Daniel Vetter, David Airlie,
Boris Brezillon, linux-renesas-soc
Current name is a bit misleading because what that helper function
really does it calls drm_connector_unregister() for all connectors.
This all has nothing to do with hotplugging so let's name things
properly.
And while at it remove potentially dangerous locking around
drm_connector_unregister() in rcar_du_remove() as mentioned
in kerneldoc for drm_connector_unregister_all().
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: linux-renesas-soc@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
Changes v2 -> v3:
* Updated title with capital after colon
* Updated kerneldoc description of drm_connector_unregister_all()
so that it will match description of register_all() to be introduced
in the next change
* Added ack from Laurent
Changes v1 -> v2:
* This patch was only introduced in v2.
drivers/gpu/drm/drm_crtc.c | 18 +++++++++---------
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 5 +----
drivers/gpu/drm/udl/udl_drv.c | 2 +-
include/drm/drm_crtc.h | 4 ++--
4 files changed, 13 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 65258ac..65488a6 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1080,25 +1080,25 @@ void drm_connector_unregister(struct drm_connector *connector)
}
EXPORT_SYMBOL(drm_connector_unregister);
-
/**
- * drm_connector_unplug_all - unregister connector userspace interfaces
+ * drm_connector_unregister_all - unregister connector userspace interfaces
* @dev: drm device
*
- * This function unregisters all connector userspace interfaces in sysfs. Should
- * be call when the device is disconnected, e.g. from an usb driver's
- * ->disconnect callback.
+ * This functions unregisters all connectors from sysfs and other places so
+ * that userspace can no longer access them. Drivers should call this as the
+ * first step tearing down the device instace, or when the underlying
+ * physical device disappeared (e.g. USB unplug), right before calling
+ * drm_dev_unregister().
*/
-void drm_connector_unplug_all(struct drm_device *dev)
+void drm_connector_unregister_all(struct drm_device *dev)
{
struct drm_connector *connector;
/* FIXME: taking the mode config mutex ends up in a clash with sysfs */
- list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ drm_for_each_connector(connector, dev)
drm_connector_unregister(connector);
-
}
-EXPORT_SYMBOL(drm_connector_unplug_all);
+EXPORT_SYMBOL(drm_connector_unregister_all);
/**
* drm_encoder_init - Init a preallocated encoder
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index ed6006b..644db36 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -278,10 +278,7 @@ static int rcar_du_remove(struct platform_device *pdev)
struct rcar_du_device *rcdu = platform_get_drvdata(pdev);
struct drm_device *ddev = rcdu->ddev;
- mutex_lock(&ddev->mode_config.mutex);
- drm_connector_unplug_all(ddev);
- mutex_unlock(&ddev->mode_config.mutex);
-
+ drm_connector_unregister_all(ddev);
drm_dev_unregister(ddev);
if (rcdu->fbdev)
diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c
index 772ec9e..c204089 100644
--- a/drivers/gpu/drm/udl/udl_drv.c
+++ b/drivers/gpu/drm/udl/udl_drv.c
@@ -94,7 +94,7 @@ static void udl_usb_disconnect(struct usb_interface *interface)
struct drm_device *dev = usb_get_intfdata(interface);
drm_kms_helper_poll_disable(dev);
- drm_connector_unplug_all(dev);
+ drm_connector_unregister_all(dev);
udl_fbdev_unplug(dev);
udl_drop_usb(dev);
drm_unplug_dev(dev);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 8c7fb3d..42d9f4d 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -2214,8 +2214,8 @@ void drm_connector_unregister(struct drm_connector *connector);
extern void drm_connector_cleanup(struct drm_connector *connector);
extern unsigned int drm_connector_index(struct drm_connector *connector);
-/* helper to unplug all connectors from sysfs for device */
-extern void drm_connector_unplug_all(struct drm_device *dev);
+/* helper to unregister all connectors from sysfs for device */
+extern void drm_connector_unregister_all(struct drm_device *dev);
extern int drm_bridge_add(struct drm_bridge *bridge);
extern void drm_bridge_remove(struct drm_bridge *bridge);
--
2.5.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper
2016-03-23 8:42 [PATCH 0/4 v3] drm: Introduce drm_connector_register_all() helper Alexey Brodkin
2016-03-23 8:42 ` [PATCH 1/4 v3] drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all() Alexey Brodkin
@ 2016-03-23 8:42 ` Alexey Brodkin
2016-03-23 11:13 ` David Herrmann
2016-03-23 8:42 ` [PATCH 3/4 v3] drm: atmel_hldc: Use generic " Alexey Brodkin
` (2 subsequent siblings)
4 siblings, 1 reply; 17+ messages in thread
From: Alexey Brodkin @ 2016-03-23 8:42 UTC (permalink / raw)
To: dri-devel; +Cc: linux-kernel, Alexey Brodkin, Daniel Vetter, David Airlie
As a pair to already existing drm_connector_unregister_all() we're adding
generic implementation of what is already done in some drivers.
Once this helper is implemented we'll be ready to switch existing
driver-specific implementations with the generic one.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
---
Changes v2 -> v3:
* Updated title with capital after colon
* Simplified failure path with direct and unconditional invocation of
unregister_all()
* Updated kerneldoc description of the drm_connector_register_all()
Changes v1 -> v2:
* Rename drm_connector_unplug_all() to drm_connector_unregister_all()
* Use drm_for_each_connector() instead of list_for_each_entry()
* Updated kerneldoc for drm_dev_register()
drivers/gpu/drm/drm_crtc.c | 43 +++++++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/drm_drv.c | 6 +++++-
include/drm/drm_crtc.h | 3 ++-
3 files changed, 50 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 65488a6..21eea11 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1081,6 +1081,49 @@ void drm_connector_unregister(struct drm_connector *connector)
EXPORT_SYMBOL(drm_connector_unregister);
/**
+ * drm_connector_register_all - register all connectors
+ * @dev: drm device
+ *
+ * This function registers all connectors in sysfs and other places so that
+ * userspace can start to access them. Drivers can call it after calling
+ * drm_dev_register() to complete the device registration, if they don't call
+ * drm_connector_register() on each connector individually.
+ *
+ * When a device is unplugged and should be removed from userspace access,
+ * call drm_connector_unregister_all(), which is the inverse of this
+ * function.
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_connector_register_all(struct drm_device *dev)
+{
+ struct drm_connector *connector;
+ int ret;
+
+ mutex_lock(&dev->mode_config.mutex);
+
+ drm_for_each_connector(connector, dev) {
+ ret = drm_connector_register(connector);
+ if (ret) {
+ /*
+ * We may safely call unregister_all() here within
+ * area locked with mutex because unregister_all()
+ * doesn't use locks inside (see a comment in that
+ * function).
+ */
+ drm_connector_unregister_all(dev);
+ return ret;
+ }
+ }
+
+ mutex_unlock(&dev->mode_config.mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_connector_register_all);
+
+/**
* drm_connector_unregister_all - unregister connector userspace interfaces
* @dev: drm device
*
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 167c8d3..2c9a2b6 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -715,7 +715,11 @@ EXPORT_SYMBOL(drm_dev_unref);
*
* Register the DRM device @dev with the system, advertise device to user-space
* and start normal device operation. @dev must be allocated via drm_dev_alloc()
- * previously.
+ * previously. Right after drm_dev_register() the driver should call
+ * drm_connector_register_all() to register all connectors in sysfs. This is
+ * a separate call for backward compatibility with drivers still using
+ * the deprecated ->load() callback, where connectors are registered from within
+ * the ->load() callback.
*
* Never call this twice on any device!
*
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 42d9f4d..6a34117 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -2214,7 +2214,8 @@ void drm_connector_unregister(struct drm_connector *connector);
extern void drm_connector_cleanup(struct drm_connector *connector);
extern unsigned int drm_connector_index(struct drm_connector *connector);
-/* helper to unregister all connectors from sysfs for device */
+/* helpers to {un}register all connectors from sysfs for device */
+extern int drm_connector_register_all(struct drm_device *dev);
extern void drm_connector_unregister_all(struct drm_device *dev);
extern int drm_bridge_add(struct drm_bridge *bridge);
--
2.5.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 3/4 v3] drm: atmel_hldc: Use generic drm_connector_register_all() helper
2016-03-23 8:42 [PATCH 0/4 v3] drm: Introduce drm_connector_register_all() helper Alexey Brodkin
2016-03-23 8:42 ` [PATCH 1/4 v3] drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all() Alexey Brodkin
2016-03-23 8:42 ` [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper Alexey Brodkin
@ 2016-03-23 8:42 ` Alexey Brodkin
2016-03-23 8:42 ` [PATCH 4/4 v3] drm: rcar-du: " Alexey Brodkin
2016-03-23 10:37 ` [PATCH 0/4 v3] drm: Introduce " Daniel Vetter
4 siblings, 0 replies; 17+ messages in thread
From: Alexey Brodkin @ 2016-03-23 8:42 UTC (permalink / raw)
To: dri-devel; +Cc: linux-kernel, Alexey Brodkin, Daniel Vetter, David Airlie
This driver used to have its own implementation of connector_register_all()
which actually was taken as a prototype of drm_connector_register_all().
Now when drm_connector_register_all() exists reusing it here.
And while at it replace atmel_hlcdc_dc_connector_unplug_all()
with generic drm_connector_unregister_all().
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
Changes v2 -> v3:
* Updated title with capital after colon
* Added ack from Boris
No changes v1 -> v2.
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 39 ++--------------------------
1 file changed, 2 insertions(+), 37 deletions(-)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index 3d8d164..1c537e4 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -584,41 +584,6 @@ static void atmel_hlcdc_dc_unload(struct drm_device *dev)
destroy_workqueue(dc->wq);
}
-static int atmel_hlcdc_dc_connector_plug_all(struct drm_device *dev)
-{
- struct drm_connector *connector, *failed;
- int ret;
-
- mutex_lock(&dev->mode_config.mutex);
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- ret = drm_connector_register(connector);
- if (ret) {
- failed = connector;
- goto err;
- }
- }
- mutex_unlock(&dev->mode_config.mutex);
- return 0;
-
-err:
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (failed == connector)
- break;
-
- drm_connector_unregister(connector);
- }
- mutex_unlock(&dev->mode_config.mutex);
-
- return ret;
-}
-
-static void atmel_hlcdc_dc_connector_unplug_all(struct drm_device *dev)
-{
- mutex_lock(&dev->mode_config.mutex);
- drm_connector_unplug_all(dev);
- mutex_unlock(&dev->mode_config.mutex);
-}
-
static void atmel_hlcdc_dc_lastclose(struct drm_device *dev)
{
struct atmel_hlcdc_dc *dc = dev->dev_private;
@@ -736,7 +701,7 @@ static int atmel_hlcdc_dc_drm_probe(struct platform_device *pdev)
if (ret)
goto err_unload;
- ret = atmel_hlcdc_dc_connector_plug_all(ddev);
+ ret = drm_connector_register_all(ddev);
if (ret)
goto err_unregister;
@@ -758,7 +723,7 @@ static int atmel_hlcdc_dc_drm_remove(struct platform_device *pdev)
{
struct drm_device *ddev = platform_get_drvdata(pdev);
- atmel_hlcdc_dc_connector_unplug_all(ddev);
+ drm_connector_unregister_all(ddev);
drm_dev_unregister(ddev);
atmel_hlcdc_dc_unload(ddev);
drm_dev_unref(ddev);
--
2.5.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH 4/4 v3] drm: rcar-du: Use generic drm_connector_register_all() helper
2016-03-23 8:42 [PATCH 0/4 v3] drm: Introduce drm_connector_register_all() helper Alexey Brodkin
` (2 preceding siblings ...)
2016-03-23 8:42 ` [PATCH 3/4 v3] drm: atmel_hldc: Use generic " Alexey Brodkin
@ 2016-03-23 8:42 ` Alexey Brodkin
2016-03-23 10:37 ` [PATCH 0/4 v3] drm: Introduce " Daniel Vetter
4 siblings, 0 replies; 17+ messages in thread
From: Alexey Brodkin @ 2016-03-23 8:42 UTC (permalink / raw)
To: dri-devel
Cc: linux-kernel, Alexey Brodkin, Daniel Vetter, David Airlie,
linux-renesas-soc
Now that a generic drm_connector_register_all() helper exists we may safely
substitute it for the driver-specific implementation of connectors plugging
in sysfs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: linux-renesas-soc@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
Changes v2 -> v3:
* Updated title with capital after colon
* Updated commit message with fixes of spellos and grammar issues
* Added ack from Laurent
No changes v1 -> v2.
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 644db36..0f251dc 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -361,14 +361,7 @@ static int rcar_du_probe(struct platform_device *pdev)
if (ret)
goto error;
- mutex_lock(&ddev->mode_config.mutex);
- drm_for_each_connector(connector, ddev) {
- ret = drm_connector_register(connector);
- if (ret < 0)
- break;
- }
- mutex_unlock(&ddev->mode_config.mutex);
-
+ ret = drm_connector_register_all(ddev);
if (ret < 0)
goto error;
--
2.5.0
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 1/4 v3] drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all()
2016-03-23 8:42 ` [PATCH 1/4 v3] drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all() Alexey Brodkin
@ 2016-03-23 9:02 ` Boris Brezillon
0 siblings, 0 replies; 17+ messages in thread
From: Boris Brezillon @ 2016-03-23 9:02 UTC (permalink / raw)
To: Alexey Brodkin
Cc: dri-devel, linux-kernel, Daniel Vetter, David Airlie, linux-renesas-soc
On Wed, 23 Mar 2016 11:42:54 +0300
Alexey Brodkin <Alexey.Brodkin@synopsys.com> wrote:
> Current name is a bit misleading because what that helper function
> really does it calls drm_connector_unregister() for all connectors.
>
> This all has nothing to do with hotplugging so let's name things
> properly.
>
> And while at it remove potentially dangerous locking around
> drm_connector_unregister() in rcar_du_remove() as mentioned
> in kerneldoc for drm_connector_unregister_all().
>
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> Cc: linux-renesas-soc@vger.kernel.org
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>
> Changes v2 -> v3:
> * Updated title with capital after colon
> * Updated kerneldoc description of drm_connector_unregister_all()
> so that it will match description of register_all() to be introduced
> in the next change
> * Added ack from Laurent
>
> Changes v1 -> v2:
> * This patch was only introduced in v2.
>
> drivers/gpu/drm/drm_crtc.c | 18 +++++++++---------
> drivers/gpu/drm/rcar-du/rcar_du_drv.c | 5 +----
> drivers/gpu/drm/udl/udl_drv.c | 2 +-
> include/drm/drm_crtc.h | 4 ++--
> 4 files changed, 13 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 65258ac..65488a6 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -1080,25 +1080,25 @@ void drm_connector_unregister(struct drm_connector *connector)
> }
> EXPORT_SYMBOL(drm_connector_unregister);
>
> -
> /**
> - * drm_connector_unplug_all - unregister connector userspace interfaces
> + * drm_connector_unregister_all - unregister connector userspace interfaces
> * @dev: drm device
> *
> - * This function unregisters all connector userspace interfaces in sysfs. Should
> - * be call when the device is disconnected, e.g. from an usb driver's
> - * ->disconnect callback.
> + * This functions unregisters all connectors from sysfs and other places so
> + * that userspace can no longer access them. Drivers should call this as the
> + * first step tearing down the device instace, or when the underlying
> + * physical device disappeared (e.g. USB unplug), right before calling
> + * drm_dev_unregister().
> */
> -void drm_connector_unplug_all(struct drm_device *dev)
> +void drm_connector_unregister_all(struct drm_device *dev)
> {
> struct drm_connector *connector;
>
> /* FIXME: taking the mode config mutex ends up in a clash with sysfs */
> - list_for_each_entry(connector, &dev->mode_config.connector_list, head)
> + drm_for_each_connector(connector, dev)
> drm_connector_unregister(connector);
> -
> }
> -EXPORT_SYMBOL(drm_connector_unplug_all);
> +EXPORT_SYMBOL(drm_connector_unregister_all);
>
> /**
> * drm_encoder_init - Init a preallocated encoder
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> index ed6006b..644db36 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -278,10 +278,7 @@ static int rcar_du_remove(struct platform_device *pdev)
> struct rcar_du_device *rcdu = platform_get_drvdata(pdev);
> struct drm_device *ddev = rcdu->ddev;
>
> - mutex_lock(&ddev->mode_config.mutex);
> - drm_connector_unplug_all(ddev);
> - mutex_unlock(&ddev->mode_config.mutex);
> -
> + drm_connector_unregister_all(ddev);
> drm_dev_unregister(ddev);
>
> if (rcdu->fbdev)
> diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c
> index 772ec9e..c204089 100644
> --- a/drivers/gpu/drm/udl/udl_drv.c
> +++ b/drivers/gpu/drm/udl/udl_drv.c
> @@ -94,7 +94,7 @@ static void udl_usb_disconnect(struct usb_interface *interface)
> struct drm_device *dev = usb_get_intfdata(interface);
>
> drm_kms_helper_poll_disable(dev);
> - drm_connector_unplug_all(dev);
> + drm_connector_unregister_all(dev);
> udl_fbdev_unplug(dev);
> udl_drop_usb(dev);
> drm_unplug_dev(dev);
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 8c7fb3d..42d9f4d 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -2214,8 +2214,8 @@ void drm_connector_unregister(struct drm_connector *connector);
>
> extern void drm_connector_cleanup(struct drm_connector *connector);
> extern unsigned int drm_connector_index(struct drm_connector *connector);
> -/* helper to unplug all connectors from sysfs for device */
> -extern void drm_connector_unplug_all(struct drm_device *dev);
> +/* helper to unregister all connectors from sysfs for device */
> +extern void drm_connector_unregister_all(struct drm_device *dev);
>
> extern int drm_bridge_add(struct drm_bridge *bridge);
> extern void drm_bridge_remove(struct drm_bridge *bridge);
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/4 v3] drm: Introduce drm_connector_register_all() helper
2016-03-23 8:42 [PATCH 0/4 v3] drm: Introduce drm_connector_register_all() helper Alexey Brodkin
` (3 preceding siblings ...)
2016-03-23 8:42 ` [PATCH 4/4 v3] drm: rcar-du: " Alexey Brodkin
@ 2016-03-23 10:37 ` Daniel Vetter
2016-03-28 10:36 ` Alexey Brodkin
4 siblings, 1 reply; 17+ messages in thread
From: Daniel Vetter @ 2016-03-23 10:37 UTC (permalink / raw)
To: Alexey Brodkin
Cc: dri-devel, linux-kernel, Daniel Vetter, David Airlie,
Boris Brezillon, Laurent Pinchart, linux-renesas-soc
On Wed, Mar 23, 2016 at 11:42:53AM +0300, Alexey Brodkin wrote:
> As a pair to already existing drm_connector_unplug_all()
> (which we'll rename in this series to drm_connector_unregister_all())
> we're adding generic implementation of what is already done in some drivers
> for registering all connectors.
>
> After implementation of that new helper we're updating 2 drivers
> that used to use it's own implementation:
> [1] atmel_hlcdc
> [2] rcar_du
>
> And one driver that uses unregister():
> [1] udl
>
> Other drivers still use load() callback and so should be first modified so
> their load() gets called from their probe() explicitly.
>
> Build- and run-tested on yet to be upstreamed ARC PGU (part of AXS10x board).
>
> Changes v2 -> v3:
> * Added acks for 1, 3 and 4 patches
> * Updated kerneldoc descriptins of both register_ and unregister_all()
> * Updated commit messages (mostly spellos and grammar issues)
>
> Changes v1 -> v2:
> * Rename drm_connector_unplug_all() to drm_connector_unregister_all()
> * Use drm_for_each_connector() instead of list_for_each_entry()
> * Updated kerneldoc for drm_dev_register()
>
> Alexey Brodkin (4):
> drm: Rename drm_connector_unplug_all() to
> drm_connector_unregister_all()
> drm: Introduce drm_connector_register_all() helper
> drm: atmel_hldc: Use generic drm_connector_register_all() helper
> drm: rcar-du: Use generic drm_connector_register_all() helper
lgtm overall, but merge window is happening so don't want to throw 4.7
patches into drm-misc. So will let these soak for a while more, please
ping me after -rc1 is out that I don't forget them.
Thanks, Daniel
>
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 39 +-----------------
> drivers/gpu/drm/drm_crtc.c | 59 ++++++++++++++++++++++++----
> drivers/gpu/drm/drm_drv.c | 6 ++-
> drivers/gpu/drm/rcar-du/rcar_du_drv.c | 14 +------
> drivers/gpu/drm/udl/udl_drv.c | 2 +-
> include/drm/drm_crtc.h | 5 ++-
> 6 files changed, 64 insertions(+), 61 deletions(-)
>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: linux-renesas-soc@vger.kernel.org
> --
> 2.5.0
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper
2016-03-23 8:42 ` [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper Alexey Brodkin
@ 2016-03-23 11:13 ` David Herrmann
0 siblings, 0 replies; 17+ messages in thread
From: David Herrmann @ 2016-03-23 11:13 UTC (permalink / raw)
To: Alexey Brodkin; +Cc: dri-devel, linux-kernel, Daniel Vetter, David Airlie
Hi
On Wed, Mar 23, 2016 at 9:42 AM, Alexey Brodkin
<Alexey.Brodkin@synopsys.com> wrote:
> As a pair to already existing drm_connector_unregister_all() we're adding
> generic implementation of what is already done in some drivers.
>
> Once this helper is implemented we'll be ready to switch existing
> driver-specific implementations with the generic one.
>
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: David Airlie <airlied@linux.ie>
> ---
>
> Changes v2 -> v3:
> * Updated title with capital after colon
> * Simplified failure path with direct and unconditional invocation of
> unregister_all()
> * Updated kerneldoc description of the drm_connector_register_all()
>
> Changes v1 -> v2:
> * Rename drm_connector_unplug_all() to drm_connector_unregister_all()
> * Use drm_for_each_connector() instead of list_for_each_entry()
> * Updated kerneldoc for drm_dev_register()
>
> drivers/gpu/drm/drm_crtc.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/drm_drv.c | 6 +++++-
> include/drm/drm_crtc.h | 3 ++-
> 3 files changed, 50 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 65488a6..21eea11 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -1081,6 +1081,49 @@ void drm_connector_unregister(struct drm_connector *connector)
> EXPORT_SYMBOL(drm_connector_unregister);
>
> /**
> + * drm_connector_register_all - register all connectors
> + * @dev: drm device
> + *
> + * This function registers all connectors in sysfs and other places so that
> + * userspace can start to access them. Drivers can call it after calling
> + * drm_dev_register() to complete the device registration, if they don't call
> + * drm_connector_register() on each connector individually.
> + *
> + * When a device is unplugged and should be removed from userspace access,
> + * call drm_connector_unregister_all(), which is the inverse of this
> + * function.
> + *
> + * Returns:
> + * Zero on success, error code on failure.
> + */
> +int drm_connector_register_all(struct drm_device *dev)
> +{
> + struct drm_connector *connector;
> + int ret;
> +
> + mutex_lock(&dev->mode_config.mutex);
> +
> + drm_for_each_connector(connector, dev) {
> + ret = drm_connector_register(connector);
> + if (ret) {
> + /*
> + * We may safely call unregister_all() here within
> + * area locked with mutex because unregister_all()
> + * doesn't use locks inside (see a comment in that
> + * function).
> + */
Ugh? unregister_all() says:
/* FIXME: taking the mode config mutex ends up in a clash with sysfs */
This strongly contradicts your comment. Anyway, regardless how you
want to fix it: You better unlock the mode-config mutex before
returning below.
Thanks
David
> + drm_connector_unregister_all(dev);
> + return ret;
> + }
> + }
> +
> + mutex_unlock(&dev->mode_config.mutex);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_connector_register_all);
> +
> +/**
> * drm_connector_unregister_all - unregister connector userspace interfaces
> * @dev: drm device
> *
> diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
> index 167c8d3..2c9a2b6 100644
> --- a/drivers/gpu/drm/drm_drv.c
> +++ b/drivers/gpu/drm/drm_drv.c
> @@ -715,7 +715,11 @@ EXPORT_SYMBOL(drm_dev_unref);
> *
> * Register the DRM device @dev with the system, advertise device to user-space
> * and start normal device operation. @dev must be allocated via drm_dev_alloc()
> - * previously.
> + * previously. Right after drm_dev_register() the driver should call
> + * drm_connector_register_all() to register all connectors in sysfs. This is
> + * a separate call for backward compatibility with drivers still using
> + * the deprecated ->load() callback, where connectors are registered from within
> + * the ->load() callback.
> *
> * Never call this twice on any device!
> *
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 42d9f4d..6a34117 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -2214,7 +2214,8 @@ void drm_connector_unregister(struct drm_connector *connector);
>
> extern void drm_connector_cleanup(struct drm_connector *connector);
> extern unsigned int drm_connector_index(struct drm_connector *connector);
> -/* helper to unregister all connectors from sysfs for device */
> +/* helpers to {un}register all connectors from sysfs for device */
> +extern int drm_connector_register_all(struct drm_device *dev);
> extern void drm_connector_unregister_all(struct drm_device *dev);
>
> extern int drm_bridge_add(struct drm_bridge *bridge);
> --
> 2.5.0
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper
@ 2016-03-23 11:13 ` David Herrmann
0 siblings, 0 replies; 17+ messages in thread
From: David Herrmann @ 2016-03-23 11:13 UTC (permalink / raw)
To: Alexey Brodkin; +Cc: linux-kernel, dri-devel
Hi
On Wed, Mar 23, 2016 at 9:42 AM, Alexey Brodkin
<Alexey.Brodkin@synopsys.com> wrote:
> As a pair to already existing drm_connector_unregister_all() we're adding
> generic implementation of what is already done in some drivers.
>
> Once this helper is implemented we'll be ready to switch existing
> driver-specific implementations with the generic one.
>
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: David Airlie <airlied@linux.ie>
> ---
>
> Changes v2 -> v3:
> * Updated title with capital after colon
> * Simplified failure path with direct and unconditional invocation of
> unregister_all()
> * Updated kerneldoc description of the drm_connector_register_all()
>
> Changes v1 -> v2:
> * Rename drm_connector_unplug_all() to drm_connector_unregister_all()
> * Use drm_for_each_connector() instead of list_for_each_entry()
> * Updated kerneldoc for drm_dev_register()
>
> drivers/gpu/drm/drm_crtc.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/drm_drv.c | 6 +++++-
> include/drm/drm_crtc.h | 3 ++-
> 3 files changed, 50 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 65488a6..21eea11 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -1081,6 +1081,49 @@ void drm_connector_unregister(struct drm_connector *connector)
> EXPORT_SYMBOL(drm_connector_unregister);
>
> /**
> + * drm_connector_register_all - register all connectors
> + * @dev: drm device
> + *
> + * This function registers all connectors in sysfs and other places so that
> + * userspace can start to access them. Drivers can call it after calling
> + * drm_dev_register() to complete the device registration, if they don't call
> + * drm_connector_register() on each connector individually.
> + *
> + * When a device is unplugged and should be removed from userspace access,
> + * call drm_connector_unregister_all(), which is the inverse of this
> + * function.
> + *
> + * Returns:
> + * Zero on success, error code on failure.
> + */
> +int drm_connector_register_all(struct drm_device *dev)
> +{
> + struct drm_connector *connector;
> + int ret;
> +
> + mutex_lock(&dev->mode_config.mutex);
> +
> + drm_for_each_connector(connector, dev) {
> + ret = drm_connector_register(connector);
> + if (ret) {
> + /*
> + * We may safely call unregister_all() here within
> + * area locked with mutex because unregister_all()
> + * doesn't use locks inside (see a comment in that
> + * function).
> + */
Ugh? unregister_all() says:
/* FIXME: taking the mode config mutex ends up in a clash with sysfs */
This strongly contradicts your comment. Anyway, regardless how you
want to fix it: You better unlock the mode-config mutex before
returning below.
Thanks
David
> + drm_connector_unregister_all(dev);
> + return ret;
> + }
> + }
> +
> + mutex_unlock(&dev->mode_config.mutex);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_connector_register_all);
> +
> +/**
> * drm_connector_unregister_all - unregister connector userspace interfaces
> * @dev: drm device
> *
> diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
> index 167c8d3..2c9a2b6 100644
> --- a/drivers/gpu/drm/drm_drv.c
> +++ b/drivers/gpu/drm/drm_drv.c
> @@ -715,7 +715,11 @@ EXPORT_SYMBOL(drm_dev_unref);
> *
> * Register the DRM device @dev with the system, advertise device to user-space
> * and start normal device operation. @dev must be allocated via drm_dev_alloc()
> - * previously.
> + * previously. Right after drm_dev_register() the driver should call
> + * drm_connector_register_all() to register all connectors in sysfs. This is
> + * a separate call for backward compatibility with drivers still using
> + * the deprecated ->load() callback, where connectors are registered from within
> + * the ->load() callback.
> *
> * Never call this twice on any device!
> *
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 42d9f4d..6a34117 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -2214,7 +2214,8 @@ void drm_connector_unregister(struct drm_connector *connector);
>
> extern void drm_connector_cleanup(struct drm_connector *connector);
> extern unsigned int drm_connector_index(struct drm_connector *connector);
> -/* helper to unregister all connectors from sysfs for device */
> +/* helpers to {un}register all connectors from sysfs for device */
> +extern int drm_connector_register_all(struct drm_device *dev);
> extern void drm_connector_unregister_all(struct drm_device *dev);
>
> extern int drm_bridge_add(struct drm_bridge *bridge);
> --
> 2.5.0
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper
2016-03-23 11:13 ` David Herrmann
(?)
@ 2016-03-23 13:41 ` Alexey Brodkin
2016-03-29 8:19 ` Daniel Vetter
-1 siblings, 1 reply; 17+ messages in thread
From: Alexey Brodkin @ 2016-03-23 13:41 UTC (permalink / raw)
To: daniel, dh.herrmann; +Cc: dri-devel, linux-kernel, airlied
Hi David,
On Wed, 2016-03-23 at 12:13 +0100, David Herrmann wrote:
> Hi
>
> On Wed, Mar 23, 2016 at 9:42 AM, Alexey Brodkin
> <Alexey.Brodkin@synopsys.com> wrote:
> >
> > As a pair to already existing drm_connector_unregister_all() we're adding
> > generic implementation of what is already done in some drivers.
> >
> > Once this helper is implemented we'll be ready to switch existing
> > driver-specific implementations with the generic one.
> >
> > Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> > Cc: Daniel Vetter <daniel@ffwll.ch>
> > Cc: David Airlie <airlied@linux.ie>
> > ---
> >
> > Changes v2 -> v3:
> > * Updated title with capital after colon
> > * Simplified failure path with direct and unconditional invocation of
> > unregister_all()
> > * Updated kerneldoc description of the drm_connector_register_all()
> >
> > Changes v1 -> v2:
> > * Rename drm_connector_unplug_all() to drm_connector_unregister_all()
> > * Use drm_for_each_connector() instead of list_for_each_entry()
> > * Updated kerneldoc for drm_dev_register()
> >
> > drivers/gpu/drm/drm_crtc.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> > drivers/gpu/drm/drm_drv.c | 6 +++++-
> > include/drm/drm_crtc.h | 3 ++-
> > 3 files changed, 50 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> > index 65488a6..21eea11 100644
> > --- a/drivers/gpu/drm/drm_crtc.c
> > +++ b/drivers/gpu/drm/drm_crtc.c
> > @@ -1081,6 +1081,49 @@ void drm_connector_unregister(struct drm_connector *connector)
> > EXPORT_SYMBOL(drm_connector_unregister);
> >
> > /**
> > + * drm_connector_register_all - register all connectors
> > + * @dev: drm device
> > + *
> > + * This function registers all connectors in sysfs and other places so that
> > + * userspace can start to access them. Drivers can call it after calling
> > + * drm_dev_register() to complete the device registration, if they don't call
> > + * drm_connector_register() on each connector individually.
> > + *
> > + * When a device is unplugged and should be removed from userspace access,
> > + * call drm_connector_unregister_all(), which is the inverse of this
> > + * function.
> > + *
> > + * Returns:
> > + * Zero on success, error code on failure.
> > + */
> > +int drm_connector_register_all(struct drm_device *dev)
> > +{
> > + struct drm_connector *connector;
> > + int ret;
> > +
> > + mutex_lock(&dev->mode_config.mutex);
> > +
> > + drm_for_each_connector(connector, dev) {
> > + ret = drm_connector_register(connector);
> > + if (ret) {
> > + /*
> > + * We may safely call unregister_all() here within
> > + * area locked with mutex because unregister_all()
> > + * doesn't use locks inside (see a comment in that
> > + * function).
> > + */
> Ugh? unregister_all() says:
>
> /* FIXME: taking the mode config mutex ends up in a clash with sysfs */
>
> This strongly contradicts your comment. Anyway, regardless how you
> want to fix it: You better unlock the mode-config mutex before
> returning below.
So good catch.
But what I really meant since we didn't get any further after registering
all "good" connections (see we're not releasing mutex still) the will be
no clashes with sysfs.
Still I;d like Daniel to comment on that separately.
-Alexey
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/4 v3] drm: Introduce drm_connector_register_all() helper
2016-03-23 10:37 ` [PATCH 0/4 v3] drm: Introduce " Daniel Vetter
@ 2016-03-28 10:36 ` Alexey Brodkin
0 siblings, 0 replies; 17+ messages in thread
From: Alexey Brodkin @ 2016-03-28 10:36 UTC (permalink / raw)
To: daniel
Cc: dri-devel, linux-kernel, boris.brezillon, linux-renesas-soc,
laurent.pinchart, dh.herrmann, airlied
Hi Daniel,
On Wed, 2016-03-23 at 11:37 +0100, Daniel Vetter wrote:
> On Wed, Mar 23, 2016 at 11:42:53AM +0300, Alexey Brodkin wrote:
> >
> > As a pair to already existing drm_connector_unplug_all()
> > (which we'll rename in this series to drm_connector_unregister_all())
> > we're adding generic implementation of what is already done in some drivers
> > for registering all connectors.
> >
> > After implementation of that new helper we're updating 2 drivers
> > that used to use it's own implementation:
> > [1] atmel_hlcdc
> > [2] rcar_du
> >
> > And one driver that uses unregister():
> > [1] udl
> >
> > Other drivers still use load() callback and so should be first modified so
> > their load() gets called from their probe() explicitly.
> >
> > Build- and run-tested on yet to be upstreamed ARC PGU (part of AXS10x board).
> >
> > Changes v2 -> v3:
> > * Added acks for 1, 3 and 4 patches
> > * Updated kerneldoc descriptins of both register_ and unregister_all()
> > * Updated commit messages (mostly spellos and grammar issues)
> >
> > Changes v1 -> v2:
> > * Rename drm_connector_unplug_all() to drm_connector_unregister_all()
> > * Use drm_for_each_connector() instead of list_for_each_entry()
> > * Updated kerneldoc for drm_dev_register()
> >
> > Alexey Brodkin (4):
> > drm: Rename drm_connector_unplug_all() to
> > drm_connector_unregister_all()
> > drm: Introduce drm_connector_register_all() helper
> > drm: atmel_hldc: Use generic drm_connector_register_all() helper
> > drm: rcar-du: Use generic drm_connector_register_all() helper
> lgtm overall, but merge window is happening so don't want to throw 4.7
> patches into drm-misc. So will let these soak for a while more, please
> ping me after -rc1 is out that I don't forget them.
As you asked I'm pinging you with request to apply that series.
Also would be very nice if you take a look at that comment from
David Herrmann before application of that series:
http://article.gmane.org/gmane.comp.video.dri.devel/149708/match=re+patch+2+4+v3+drm+introduce+drm_connector_register_al
l+helper
-Alexey
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/4 v3] drm: Introduce drm_connector_register_all() helper
@ 2016-03-28 10:36 ` Alexey Brodkin
0 siblings, 0 replies; 17+ messages in thread
From: Alexey Brodkin @ 2016-03-28 10:36 UTC (permalink / raw)
To: daniel
Cc: dri-devel, linux-kernel, boris.brezillon, linux-renesas-soc,
laurent.pinchart, dh.herrmann, airlied
Hi Daniel,
On Wed, 2016-03-23 at 11:37 +0100, Daniel Vetter wrote:
> On Wed, Mar 23, 2016 at 11:42:53AM +0300, Alexey Brodkin wrote:
> >
> > As a pair to already existing drm_connector_unplug_all()
> > (which we'll rename in this series to drm_connector_unregister_all())
> > we're adding generic implementation of what is already done in some drivers
> > for registering all connectors.
> >
> > After implementation of that new helper we're updating 2 drivers
> > that used to use it's own implementation:
> > [1] atmel_hlcdc
> > [2] rcar_du
> >
> > And one driver that uses unregister():
> > [1] udl
> >
> > Other drivers still use load() callback and so should be first modified so
> > their load() gets called from their probe() explicitly.
> >
> > Build- and run-tested on yet to be upstreamed ARC PGU (part of AXS10x board).
> >
> > Changes v2 -> v3:
> > * Added acks for 1, 3 and 4 patches
> > * Updated kerneldoc descriptins of both register_ and unregister_all()
> > * Updated commit messages (mostly spellos and grammar issues)
> >
> > Changes v1 -> v2:
> > * Rename drm_connector_unplug_all() to drm_connector_unregister_all()
> > * Use drm_for_each_connector() instead of list_for_each_entry()
> > * Updated kerneldoc for drm_dev_register()
> >
> > Alexey Brodkin (4):
> > drm: Rename drm_connector_unplug_all() to
> > drm_connector_unregister_all()
> > drm: Introduce drm_connector_register_all() helper
> > drm: atmel_hldc: Use generic drm_connector_register_all() helper
> > drm: rcar-du: Use generic drm_connector_register_all() helper
> lgtm overall, but merge window is happening so don't want to throw 4.7
> patches into drm-misc. So will let these soak for a while more, please
> ping me after -rc1 is out that I don't forget them.
As you asked I'm pinging you with request to apply that series.
Also would be very nice if you take a look at that comment from
David Herrmann before application of that series:
http://article.gmane.org/gmane.comp.video.dri.devel/149708/match=re+patch+2+4+v3+drm+introduce+drm_connector_register_al
l+helper
-Alexey
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper
2016-03-23 13:41 ` Alexey Brodkin
@ 2016-03-29 8:19 ` Daniel Vetter
0 siblings, 0 replies; 17+ messages in thread
From: Daniel Vetter @ 2016-03-29 8:19 UTC (permalink / raw)
To: Alexey Brodkin; +Cc: daniel, dh.herrmann, dri-devel, linux-kernel, airlied
On Wed, Mar 23, 2016 at 01:41:05PM +0000, Alexey Brodkin wrote:
> Hi David,
>
> On Wed, 2016-03-23 at 12:13 +0100, David Herrmann wrote:
> > Hi
> >
> > On Wed, Mar 23, 2016 at 9:42 AM, Alexey Brodkin
> > <Alexey.Brodkin@synopsys.com> wrote:
> > >
> > > As a pair to already existing drm_connector_unregister_all() we're adding
> > > generic implementation of what is already done in some drivers.
> > >
> > > Once this helper is implemented we'll be ready to switch existing
> > > driver-specific implementations with the generic one.
> > >
> > > Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> > > Cc: Daniel Vetter <daniel@ffwll.ch>
> > > Cc: David Airlie <airlied@linux.ie>
> > > ---
> > >
> > > Changes v2 -> v3:
> > > * Updated title with capital after colon
> > > * Simplified failure path with direct and unconditional invocation of
> > > unregister_all()
> > > * Updated kerneldoc description of the drm_connector_register_all()
> > >
> > > Changes v1 -> v2:
> > > * Rename drm_connector_unplug_all() to drm_connector_unregister_all()
> > > * Use drm_for_each_connector() instead of list_for_each_entry()
> > > * Updated kerneldoc for drm_dev_register()
> > >
> > > drivers/gpu/drm/drm_crtc.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> > > drivers/gpu/drm/drm_drv.c | 6 +++++-
> > > include/drm/drm_crtc.h | 3 ++-
> > > 3 files changed, 50 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> > > index 65488a6..21eea11 100644
> > > --- a/drivers/gpu/drm/drm_crtc.c
> > > +++ b/drivers/gpu/drm/drm_crtc.c
> > > @@ -1081,6 +1081,49 @@ void drm_connector_unregister(struct drm_connector *connector)
> > > EXPORT_SYMBOL(drm_connector_unregister);
> > >
> > > /**
> > > + * drm_connector_register_all - register all connectors
> > > + * @dev: drm device
> > > + *
> > > + * This function registers all connectors in sysfs and other places so that
> > > + * userspace can start to access them. Drivers can call it after calling
> > > + * drm_dev_register() to complete the device registration, if they don't call
> > > + * drm_connector_register() on each connector individually.
> > > + *
> > > + * When a device is unplugged and should be removed from userspace access,
> > > + * call drm_connector_unregister_all(), which is the inverse of this
> > > + * function.
> > > + *
> > > + * Returns:
> > > + * Zero on success, error code on failure.
> > > + */
> > > +int drm_connector_register_all(struct drm_device *dev)
> > > +{
> > > + struct drm_connector *connector;
> > > + int ret;
> > > +
> > > + mutex_lock(&dev->mode_config.mutex);
> > > +
> > > + drm_for_each_connector(connector, dev) {
> > > + ret = drm_connector_register(connector);
> > > + if (ret) {
> > > + /*
> > > + * We may safely call unregister_all() here within
> > > + * area locked with mutex because unregister_all()
> > > + * doesn't use locks inside (see a comment in that
> > > + * function).
> > > + */
> > Ugh? unregister_all() says:
> >
> > /* FIXME: taking the mode config mutex ends up in a clash with sysfs */
> >
> > This strongly contradicts your comment. Anyway, regardless how you
> > want to fix it: You better unlock the mode-config mutex before
> > returning below.
>
> So good catch.
> But what I really meant since we didn't get any further after registering
> all "good" connections (see we're not releasing mutex still) the will be
> no clashes with sysfs.
>
> Still I;d like Daniel to comment on that separately.
I think doing the unregister_all outside of the loop&locked section is
better for future-proofing. My long-term plan for connector lifetimes and
the connector list is:
- refcounting for connectors (Dave has wip patches already).
- separate lock for the connector list (and only that).
Doing it entirely separate would make things easier and more robust.
I merged patch 1 meanwhile to drm-misc.
Thanks, Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper
@ 2016-03-29 8:19 ` Daniel Vetter
0 siblings, 0 replies; 17+ messages in thread
From: Daniel Vetter @ 2016-03-29 8:19 UTC (permalink / raw)
To: Alexey Brodkin; +Cc: linux-kernel, dri-devel
On Wed, Mar 23, 2016 at 01:41:05PM +0000, Alexey Brodkin wrote:
> Hi David,
>
> On Wed, 2016-03-23 at 12:13 +0100, David Herrmann wrote:
> > Hi
> >
> > On Wed, Mar 23, 2016 at 9:42 AM, Alexey Brodkin
> > <Alexey.Brodkin@synopsys.com> wrote:
> > >
> > > As a pair to already existing drm_connector_unregister_all() we're adding
> > > generic implementation of what is already done in some drivers.
> > >
> > > Once this helper is implemented we'll be ready to switch existing
> > > driver-specific implementations with the generic one.
> > >
> > > Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> > > Cc: Daniel Vetter <daniel@ffwll.ch>
> > > Cc: David Airlie <airlied@linux.ie>
> > > ---
> > >
> > > Changes v2 -> v3:
> > > * Updated title with capital after colon
> > > * Simplified failure path with direct and unconditional invocation of
> > > unregister_all()
> > > * Updated kerneldoc description of the drm_connector_register_all()
> > >
> > > Changes v1 -> v2:
> > > * Rename drm_connector_unplug_all() to drm_connector_unregister_all()
> > > * Use drm_for_each_connector() instead of list_for_each_entry()
> > > * Updated kerneldoc for drm_dev_register()
> > >
> > > drivers/gpu/drm/drm_crtc.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> > > drivers/gpu/drm/drm_drv.c | 6 +++++-
> > > include/drm/drm_crtc.h | 3 ++-
> > > 3 files changed, 50 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> > > index 65488a6..21eea11 100644
> > > --- a/drivers/gpu/drm/drm_crtc.c
> > > +++ b/drivers/gpu/drm/drm_crtc.c
> > > @@ -1081,6 +1081,49 @@ void drm_connector_unregister(struct drm_connector *connector)
> > > EXPORT_SYMBOL(drm_connector_unregister);
> > >
> > > /**
> > > + * drm_connector_register_all - register all connectors
> > > + * @dev: drm device
> > > + *
> > > + * This function registers all connectors in sysfs and other places so that
> > > + * userspace can start to access them. Drivers can call it after calling
> > > + * drm_dev_register() to complete the device registration, if they don't call
> > > + * drm_connector_register() on each connector individually.
> > > + *
> > > + * When a device is unplugged and should be removed from userspace access,
> > > + * call drm_connector_unregister_all(), which is the inverse of this
> > > + * function.
> > > + *
> > > + * Returns:
> > > + * Zero on success, error code on failure.
> > > + */
> > > +int drm_connector_register_all(struct drm_device *dev)
> > > +{
> > > + struct drm_connector *connector;
> > > + int ret;
> > > +
> > > + mutex_lock(&dev->mode_config.mutex);
> > > +
> > > + drm_for_each_connector(connector, dev) {
> > > + ret = drm_connector_register(connector);
> > > + if (ret) {
> > > + /*
> > > + * We may safely call unregister_all() here within
> > > + * area locked with mutex because unregister_all()
> > > + * doesn't use locks inside (see a comment in that
> > > + * function).
> > > + */
> > Ugh? unregister_all() says:
> >
> > /* FIXME: taking the mode config mutex ends up in a clash with sysfs */
> >
> > This strongly contradicts your comment. Anyway, regardless how you
> > want to fix it: You better unlock the mode-config mutex before
> > returning below.
>
> So good catch.
> But what I really meant since we didn't get any further after registering
> all "good" connections (see we're not releasing mutex still) the will be
> no clashes with sysfs.
>
> Still I;d like Daniel to comment on that separately.
I think doing the unregister_all outside of the loop&locked section is
better for future-proofing. My long-term plan for connector lifetimes and
the connector list is:
- refcounting for connectors (Dave has wip patches already).
- separate lock for the connector list (and only that).
Doing it entirely separate would make things easier and more robust.
I merged patch 1 meanwhile to drm-misc.
Thanks, Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper
2016-03-29 8:19 ` Daniel Vetter
(?)
@ 2016-03-29 9:12 ` Alexey Brodkin
2016-03-29 12:52 ` Daniel Vetter
-1 siblings, 1 reply; 17+ messages in thread
From: Alexey Brodkin @ 2016-03-29 9:12 UTC (permalink / raw)
To: daniel; +Cc: dri-devel, linux-kernel, dh.herrmann, airlied
Hi Daniel,
On Tue, 2016-03-29 at 10:19 +0200, Daniel Vetter wrote:
> On Wed, Mar 23, 2016 at 01:41:05PM +0000, Alexey Brodkin wrote:
> >
> > Hi David,
> >
> > On Wed, 2016-03-23 at 12:13 +0100, David Herrmann wrote:
> > >
> > > Hi
> > >
> > > On Wed, Mar 23, 2016 at 9:42 AM, Alexey Brodkin
> > > <Alexey.Brodkin@synopsys.com> wrote:
> > > >
> > > >
> > > > As a pair to already existing drm_connector_unregister_all() we're adding
> > > > generic implementation of what is already done in some drivers.
> > > >
> > > > Once this helper is implemented we'll be ready to switch existing
> > > > driver-specific implementations with the generic one.
> > > >
> > > > Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> > > > Cc: Daniel Vetter <daniel@ffwll.ch>
> > > > Cc: David Airlie <airlied@linux.ie>
> > > > ---
> > > >
> > > > Changes v2 -> v3:
> > > > * Updated title with capital after colon
> > > > * Simplified failure path with direct and unconditional invocation of
> > > > unregister_all()
> > > > * Updated kerneldoc description of the drm_connector_register_all()
> > > >
> > > > Changes v1 -> v2:
> > > > * Rename drm_connector_unplug_all() to drm_connector_unregister_all()
> > > > * Use drm_for_each_connector() instead of list_for_each_entry()
> > > > * Updated kerneldoc for drm_dev_register()
> > > >
> > > > drivers/gpu/drm/drm_crtc.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> > > > drivers/gpu/drm/drm_drv.c | 6 +++++-
> > > > include/drm/drm_crtc.h | 3 ++-
> > > > 3 files changed, 50 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> > > > index 65488a6..21eea11 100644
> > > > --- a/drivers/gpu/drm/drm_crtc.c
> > > > +++ b/drivers/gpu/drm/drm_crtc.c
> > > > @@ -1081,6 +1081,49 @@ void drm_connector_unregister(struct drm_connector *connector)
> > > > EXPORT_SYMBOL(drm_connector_unregister);
> > > >
> > > > /**
> > > > + * drm_connector_register_all - register all connectors
> > > > + * @dev: drm device
> > > > + *
> > > > + * This function registers all connectors in sysfs and other places so that
> > > > + * userspace can start to access them. Drivers can call it after calling
> > > > + * drm_dev_register() to complete the device registration, if they don't call
> > > > + * drm_connector_register() on each connector individually.
> > > > + *
> > > > + * When a device is unplugged and should be removed from userspace access,
> > > > + * call drm_connector_unregister_all(), which is the inverse of this
> > > > + * function.
> > > > + *
> > > > + * Returns:
> > > > + * Zero on success, error code on failure.
> > > > + */
> > > > +int drm_connector_register_all(struct drm_device *dev)
> > > > +{
> > > > + struct drm_connector *connector;
> > > > + int ret;
> > > > +
> > > > + mutex_lock(&dev->mode_config.mutex);
> > > > +
> > > > + drm_for_each_connector(connector, dev) {
> > > > + ret = drm_connector_register(connector);
> > > > + if (ret) {
> > > > + /*
> > > > + * We may safely call unregister_all() here within
> > > > + * area locked with mutex because unregister_all()
> > > > + * doesn't use locks inside (see a comment in that
> > > > + * function).
> > > > + */
> > > Ugh? unregister_all() says:
> > >
> > > /* FIXME: taking the mode config mutex ends up in a clash with sysfs */
> > >
> > > This strongly contradicts your comment. Anyway, regardless how you
> > > want to fix it: You better unlock the mode-config mutex before
> > > returning below.
> > So good catch.
> > But what I really meant since we didn't get any further after registering
> > all "good" connections (see we're not releasing mutex still) the will be
> > no clashes with sysfs.
> >
> > Still I;d like Daniel to comment on that separately.
> I think doing the unregister_all outside of the loop&locked section is
> better for future-proofing. My long-term plan for connector lifetimes and
> the connector list is:
> - refcounting for connectors (Dave has wip patches already).
> - separate lock for the connector list (and only that).
>
> Doing it entirely separate would make things easier and more robust.
Ok makes sense.
> I merged patch 1 meanwhile to drm-misc.
So may I re-send only patches 2-4 then (using "drm-misc" as a base)?
-Alexey
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper
2016-03-29 9:12 ` Alexey Brodkin
@ 2016-03-29 12:52 ` Daniel Vetter
0 siblings, 0 replies; 17+ messages in thread
From: Daniel Vetter @ 2016-03-29 12:52 UTC (permalink / raw)
To: Alexey Brodkin; +Cc: daniel, dri-devel, linux-kernel, dh.herrmann, airlied
On Tue, Mar 29, 2016 at 09:12:38AM +0000, Alexey Brodkin wrote:
> Hi Daniel,
>
> On Tue, 2016-03-29 at 10:19 +0200, Daniel Vetter wrote:
> > On Wed, Mar 23, 2016 at 01:41:05PM +0000, Alexey Brodkin wrote:
> > >
> > > Hi David,
> > >
> > > On Wed, 2016-03-23 at 12:13 +0100, David Herrmann wrote:
> > > >
> > > > Hi
> > > >
> > > > On Wed, Mar 23, 2016 at 9:42 AM, Alexey Brodkin
> > > > <Alexey.Brodkin@synopsys.com> wrote:
> > > > >
> > > > >
> > > > > As a pair to already existing drm_connector_unregister_all() we're adding
> > > > > generic implementation of what is already done in some drivers.
> > > > >
> > > > > Once this helper is implemented we'll be ready to switch existing
> > > > > driver-specific implementations with the generic one.
> > > > >
> > > > > Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> > > > > Cc: Daniel Vetter <daniel@ffwll.ch>
> > > > > Cc: David Airlie <airlied@linux.ie>
> > > > > ---
> > > > >
> > > > > Changes v2 -> v3:
> > > > > * Updated title with capital after colon
> > > > > * Simplified failure path with direct and unconditional invocation of
> > > > > unregister_all()
> > > > > * Updated kerneldoc description of the drm_connector_register_all()
> > > > >
> > > > > Changes v1 -> v2:
> > > > > * Rename drm_connector_unplug_all() to drm_connector_unregister_all()
> > > > > * Use drm_for_each_connector() instead of list_for_each_entry()
> > > > > * Updated kerneldoc for drm_dev_register()
> > > > >
> > > > > drivers/gpu/drm/drm_crtc.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> > > > > drivers/gpu/drm/drm_drv.c | 6 +++++-
> > > > > include/drm/drm_crtc.h | 3 ++-
> > > > > 3 files changed, 50 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> > > > > index 65488a6..21eea11 100644
> > > > > --- a/drivers/gpu/drm/drm_crtc.c
> > > > > +++ b/drivers/gpu/drm/drm_crtc.c
> > > > > @@ -1081,6 +1081,49 @@ void drm_connector_unregister(struct drm_connector *connector)
> > > > > EXPORT_SYMBOL(drm_connector_unregister);
> > > > >
> > > > > /**
> > > > > + * drm_connector_register_all - register all connectors
> > > > > + * @dev: drm device
> > > > > + *
> > > > > + * This function registers all connectors in sysfs and other places so that
> > > > > + * userspace can start to access them. Drivers can call it after calling
> > > > > + * drm_dev_register() to complete the device registration, if they don't call
> > > > > + * drm_connector_register() on each connector individually.
> > > > > + *
> > > > > + * When a device is unplugged and should be removed from userspace access,
> > > > > + * call drm_connector_unregister_all(), which is the inverse of this
> > > > > + * function.
> > > > > + *
> > > > > + * Returns:
> > > > > + * Zero on success, error code on failure.
> > > > > + */
> > > > > +int drm_connector_register_all(struct drm_device *dev)
> > > > > +{
> > > > > + struct drm_connector *connector;
> > > > > + int ret;
> > > > > +
> > > > > + mutex_lock(&dev->mode_config.mutex);
> > > > > +
> > > > > + drm_for_each_connector(connector, dev) {
> > > > > + ret = drm_connector_register(connector);
> > > > > + if (ret) {
> > > > > + /*
> > > > > + * We may safely call unregister_all() here within
> > > > > + * area locked with mutex because unregister_all()
> > > > > + * doesn't use locks inside (see a comment in that
> > > > > + * function).
> > > > > + */
> > > > Ugh? unregister_all() says:
> > > >
> > > > /* FIXME: taking the mode config mutex ends up in a clash with sysfs */
> > > >
> > > > This strongly contradicts your comment. Anyway, regardless how you
> > > > want to fix it: You better unlock the mode-config mutex before
> > > > returning below.
> > > So good catch.
> > > But what I really meant since we didn't get any further after registering
> > > all "good" connections (see we're not releasing mutex still) the will be
> > > no clashes with sysfs.
> > >
> > > Still I;d like Daniel to comment on that separately.
> > I think doing the unregister_all outside of the loop&locked section is
> > better for future-proofing. My long-term plan for connector lifetimes and
> > the connector list is:
> > - refcounting for connectors (Dave has wip patches already).
> > - separate lock for the connector list (and only that).
> >
> > Doing it entirely separate would make things easier and more robust.
>
> Ok makes sense.
>
> > I merged patch 1 meanwhile to drm-misc.
>
> So may I re-send only patches 2-4 then (using "drm-misc" as a base)?
Sure. drm-misc is also in linux-next, in case you need other bits to be
able to test all your patches.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper
@ 2016-03-29 12:52 ` Daniel Vetter
0 siblings, 0 replies; 17+ messages in thread
From: Daniel Vetter @ 2016-03-29 12:52 UTC (permalink / raw)
To: Alexey Brodkin; +Cc: dri-devel, linux-kernel
On Tue, Mar 29, 2016 at 09:12:38AM +0000, Alexey Brodkin wrote:
> Hi Daniel,
>
> On Tue, 2016-03-29 at 10:19 +0200, Daniel Vetter wrote:
> > On Wed, Mar 23, 2016 at 01:41:05PM +0000, Alexey Brodkin wrote:
> > >
> > > Hi David,
> > >
> > > On Wed, 2016-03-23 at 12:13 +0100, David Herrmann wrote:
> > > >
> > > > Hi
> > > >
> > > > On Wed, Mar 23, 2016 at 9:42 AM, Alexey Brodkin
> > > > <Alexey.Brodkin@synopsys.com> wrote:
> > > > >
> > > > >
> > > > > As a pair to already existing drm_connector_unregister_all() we're adding
> > > > > generic implementation of what is already done in some drivers.
> > > > >
> > > > > Once this helper is implemented we'll be ready to switch existing
> > > > > driver-specific implementations with the generic one.
> > > > >
> > > > > Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> > > > > Cc: Daniel Vetter <daniel@ffwll.ch>
> > > > > Cc: David Airlie <airlied@linux.ie>
> > > > > ---
> > > > >
> > > > > Changes v2 -> v3:
> > > > > * Updated title with capital after colon
> > > > > * Simplified failure path with direct and unconditional invocation of
> > > > > unregister_all()
> > > > > * Updated kerneldoc description of the drm_connector_register_all()
> > > > >
> > > > > Changes v1 -> v2:
> > > > > * Rename drm_connector_unplug_all() to drm_connector_unregister_all()
> > > > > * Use drm_for_each_connector() instead of list_for_each_entry()
> > > > > * Updated kerneldoc for drm_dev_register()
> > > > >
> > > > > drivers/gpu/drm/drm_crtc.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> > > > > drivers/gpu/drm/drm_drv.c | 6 +++++-
> > > > > include/drm/drm_crtc.h | 3 ++-
> > > > > 3 files changed, 50 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> > > > > index 65488a6..21eea11 100644
> > > > > --- a/drivers/gpu/drm/drm_crtc.c
> > > > > +++ b/drivers/gpu/drm/drm_crtc.c
> > > > > @@ -1081,6 +1081,49 @@ void drm_connector_unregister(struct drm_connector *connector)
> > > > > EXPORT_SYMBOL(drm_connector_unregister);
> > > > >
> > > > > /**
> > > > > + * drm_connector_register_all - register all connectors
> > > > > + * @dev: drm device
> > > > > + *
> > > > > + * This function registers all connectors in sysfs and other places so that
> > > > > + * userspace can start to access them. Drivers can call it after calling
> > > > > + * drm_dev_register() to complete the device registration, if they don't call
> > > > > + * drm_connector_register() on each connector individually.
> > > > > + *
> > > > > + * When a device is unplugged and should be removed from userspace access,
> > > > > + * call drm_connector_unregister_all(), which is the inverse of this
> > > > > + * function.
> > > > > + *
> > > > > + * Returns:
> > > > > + * Zero on success, error code on failure.
> > > > > + */
> > > > > +int drm_connector_register_all(struct drm_device *dev)
> > > > > +{
> > > > > + struct drm_connector *connector;
> > > > > + int ret;
> > > > > +
> > > > > + mutex_lock(&dev->mode_config.mutex);
> > > > > +
> > > > > + drm_for_each_connector(connector, dev) {
> > > > > + ret = drm_connector_register(connector);
> > > > > + if (ret) {
> > > > > + /*
> > > > > + * We may safely call unregister_all() here within
> > > > > + * area locked with mutex because unregister_all()
> > > > > + * doesn't use locks inside (see a comment in that
> > > > > + * function).
> > > > > + */
> > > > Ugh? unregister_all() says:
> > > >
> > > > /* FIXME: taking the mode config mutex ends up in a clash with sysfs */
> > > >
> > > > This strongly contradicts your comment. Anyway, regardless how you
> > > > want to fix it: You better unlock the mode-config mutex before
> > > > returning below.
> > > So good catch.
> > > But what I really meant since we didn't get any further after registering
> > > all "good" connections (see we're not releasing mutex still) the will be
> > > no clashes with sysfs.
> > >
> > > Still I;d like Daniel to comment on that separately.
> > I think doing the unregister_all outside of the loop&locked section is
> > better for future-proofing. My long-term plan for connector lifetimes and
> > the connector list is:
> > - refcounting for connectors (Dave has wip patches already).
> > - separate lock for the connector list (and only that).
> >
> > Doing it entirely separate would make things easier and more robust.
>
> Ok makes sense.
>
> > I merged patch 1 meanwhile to drm-misc.
>
> So may I re-send only patches 2-4 then (using "drm-misc" as a base)?
Sure. drm-misc is also in linux-next, in case you need other bits to be
able to test all your patches.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2016-03-29 12:52 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-03-23 8:42 [PATCH 0/4 v3] drm: Introduce drm_connector_register_all() helper Alexey Brodkin
2016-03-23 8:42 ` [PATCH 1/4 v3] drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all() Alexey Brodkin
2016-03-23 9:02 ` Boris Brezillon
2016-03-23 8:42 ` [PATCH 2/4 v3] drm: Introduce drm_connector_register_all() helper Alexey Brodkin
2016-03-23 11:13 ` David Herrmann
2016-03-23 11:13 ` David Herrmann
2016-03-23 13:41 ` Alexey Brodkin
2016-03-29 8:19 ` Daniel Vetter
2016-03-29 8:19 ` Daniel Vetter
2016-03-29 9:12 ` Alexey Brodkin
2016-03-29 12:52 ` Daniel Vetter
2016-03-29 12:52 ` Daniel Vetter
2016-03-23 8:42 ` [PATCH 3/4 v3] drm: atmel_hldc: Use generic " Alexey Brodkin
2016-03-23 8:42 ` [PATCH 4/4 v3] drm: rcar-du: " Alexey Brodkin
2016-03-23 10:37 ` [PATCH 0/4 v3] drm: Introduce " Daniel Vetter
2016-03-28 10:36 ` Alexey Brodkin
2016-03-28 10:36 ` Alexey Brodkin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.