* [Buildroot] [PATCH v2 1/2] buildroot-test: enable toolchains based on hostarch
@ 2016-04-01 0:02 Matt Weber
2016-04-01 0:02 ` [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update Matt Weber
2016-04-21 21:05 ` [Buildroot] [PATCH v2 1/2] buildroot-test: enable toolchains based on hostarch Thomas Petazzoni
0 siblings, 2 replies; 12+ messages in thread
From: Matt Weber @ 2016-04-01 0:02 UTC (permalink / raw)
To: buildroot
- updated toolchain csv to include hostarch
- fixed logic in autobuild-run to correctly select any, x86_64 vs x86
Signed-off-by: Matt Weber <matt@thewebers.ws>
--
Changes for v2
- Updated toolchain csv file to have internal configs
listed as any type (Suggested by Thomas)
- Updated autobuild-run script to account for 'any' hostarch
type as well as x86_64 being capable of running x86 toolchains
(Sgggested by Thomas)
---
scripts/autobuild-run | 25 +++++++++++--
web/toolchains/configs/toolchain-configs.csv | 56 ++++++++++++++--------------
2 files changed, 49 insertions(+), 32 deletions(-)
diff --git a/scripts/autobuild-run b/scripts/autobuild-run
index ca5bdfc..1fbf482 100755
--- a/scripts/autobuild-run
+++ b/scripts/autobuild-run
@@ -259,17 +259,34 @@ def get_toolchain_configs():
configs = []
(_, _, _, _, hostarch) = os.uname()
- if hostarch == 'i686' or hostarch == 'x86_64':
+ # ~2015 distros report x86 when on a 32bit install
+ if hostarch == 'i686' or hostarch == 'i386' or hostarch == 'x86':
hostarch = 'x86'
for row in csv.reader(l):
config = {}
config["url"] = row[0]
config["hostarch"] = row[1]
- # Ignore toolchains that are not built for the appropriate
- # host architecture
- if hostarch != config["hostarch"]:
+ keep = False
+
+ # Keep all toolchain configs that work regardless of the host
+ # architecture
+ if config['hostarch'] == "any":
+ keep = True
+
+ # Keep all toolchain configs that can work on the current host
+ # architecture
+ if hostarch == config["hostarch"]:
+ keep = True
+
+ # Assume that x86 32 bits toolchains work on x86_64 build
+ # machines
+ if hostarch == 'x86_64' and config["hostarch"] == "x86":
+ keep = True
+
+ if not keep:
continue
+
config["libc"] = row[2]
with urlopen_closing(config["url"]) as r:
config["contents"] = decode_byte_list(r.readlines())
diff --git a/web/toolchains/configs/toolchain-configs.csv b/web/toolchains/configs/toolchain-configs.csv
index 56fbdf7..6872b69 100644
--- a/web/toolchains/configs/toolchain-configs.csv
+++ b/web/toolchains/configs/toolchain-configs.csv
@@ -2,34 +2,34 @@ http://autobuild.buildroot.org/toolchains/configs/armv5-ctng-linux-gnueabi.confi
http://autobuild.buildroot.org/toolchains/configs/armv7-ctng-linux-gnueabihf.config,x86,glibc
http://autobuild.buildroot.org/toolchains/configs/bfin-linux-uclibc.config,x86,uclibc
http://autobuild.buildroot.org/toolchains/configs/bfin-uclinux.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-aarch64-glibc.config,x86,glibc
-http://autobuild.buildroot.org/toolchains/configs/br-arc-full-internal.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-arcle-hs38.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-arm-basic.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-arm-cortex-a9-glibc.config,x86,glibc
-http://autobuild.buildroot.org/toolchains/configs/br-arm-cortex-a9-musl.config,x86,musl
-http://autobuild.buildroot.org/toolchains/configs/br-arm-full.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-arm-full-nothread.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-arm-full-static.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-arm-internal-full.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-i386-pentium4-full.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-microblazeel-full.config,x86,glibc
-http://autobuild.buildroot.org/toolchains/configs/br-microblazeel-full-internal.config,x86,glibc
-http://autobuild.buildroot.org/toolchains/configs/br-mips64-n64-full.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-mips32r6-el-hf-glibc.config,x86,glibc
-http://autobuild.buildroot.org/toolchains/configs/br-mips64r6-el-hf-glibc.config,x86,glibc
-http://autobuild.buildroot.org/toolchains/configs/br-mipsel-o32-full.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-nios2-glibc.config,x86,glibc
-http://autobuild.buildroot.org/toolchains/configs/br-powerpc-603e-basic-cpp.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-powerpc-e500mc-full.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-powerpc-internal-full.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-sh4-full.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-sparc-glibc.config,x86,glibc
-http://autobuild.buildroot.org/toolchains/configs/br-sparc64-glibc.config,x86,glibc
-http://autobuild.buildroot.org/toolchains/configs/br-x86-64-core2-full.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-x86-64-musl.config,x86,musl
-http://autobuild.buildroot.org/toolchains/configs/br-xtensa-full.config,x86,uclibc
-http://autobuild.buildroot.org/toolchains/configs/br-xtensa-full-internal.config,x86,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-aarch64-glibc.config,x86_64,glibc
+http://autobuild.buildroot.org/toolchains/configs/br-arc-full-internal.config,any,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-arcle-hs38.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-arm-basic.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-arm-cortex-a9-glibc.config,x86_64,glibc
+http://autobuild.buildroot.org/toolchains/configs/br-arm-cortex-a9-musl.config,x86_64,musl
+http://autobuild.buildroot.org/toolchains/configs/br-arm-full.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-arm-full-nothread.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-arm-full-static.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-arm-internal-full.config,any,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-i386-pentium4-full.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-microblazeel-full.config,x86_64,glibc
+http://autobuild.buildroot.org/toolchains/configs/br-microblazeel-full-internal.config,any,glibc
+http://autobuild.buildroot.org/toolchains/configs/br-mips64-n64-full.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-mips32r6-el-hf-glibc.config,x86_64,glibc
+http://autobuild.buildroot.org/toolchains/configs/br-mips64r6-el-hf-glibc.config,x86_64,glibc
+http://autobuild.buildroot.org/toolchains/configs/br-mipsel-o32-full.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-nios2-glibc.config,x86_64,glibc
+http://autobuild.buildroot.org/toolchains/configs/br-powerpc-603e-basic-cpp.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-powerpc-e500mc-full.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-powerpc-internal-full.config,any,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-sh4-full.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-sparc-glibc.config,x86_64,glibc
+http://autobuild.buildroot.org/toolchains/configs/br-sparc64-glibc.config,x86_64,glibc
+http://autobuild.buildroot.org/toolchains/configs/br-x86-64-core2-full.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-x86-64-musl.config,x86_64,musl
+http://autobuild.buildroot.org/toolchains/configs/br-xtensa-full.config,x86_64,uclibc
+http://autobuild.buildroot.org/toolchains/configs/br-xtensa-full-internal.config,any,uclibc
http://autobuild.buildroot.org/toolchains/configs/i686-ctng-linux-gnu.config,x86,glibc
http://autobuild.buildroot.org/toolchains/configs/linaro-aarch64.config,x86,glibc
http://autobuild.buildroot.org/toolchains/configs/linaro-arm.config,x86,glibc
--
2.5.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update
2016-04-01 0:02 [Buildroot] [PATCH v2 1/2] buildroot-test: enable toolchains based on hostarch Matt Weber
@ 2016-04-01 0:02 ` Matt Weber
2016-04-01 1:55 ` Thomas Petazzoni
2016-09-06 20:04 ` Thomas Petazzoni
2016-04-21 21:05 ` [Buildroot] [PATCH v2 1/2] buildroot-test: enable toolchains based on hostarch Thomas Petazzoni
1 sibling, 2 replies; 12+ messages in thread
From: Matt Weber @ 2016-04-01 0:02 UTC (permalink / raw)
To: buildroot
- Sub-make required one additional line tailed
- Both autobuild-run regex to truncate end log
and import which sets the failure reason on
the report are updated
Signed-off-by: Matt Weber <matt@thewebers.ws>
--
Changes for v2:
- Added back in : as previous test masked
that is was ok to leave in (Suggested by Thomas)
---
scripts/autobuild-run | 4 ++--
web/import.inc.php | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/scripts/autobuild-run b/scripts/autobuild-run
index 1fbf482..f9743a8 100755
--- a/scripts/autobuild-run
+++ b/scripts/autobuild-run
@@ -665,10 +665,10 @@ def send_results(result, **kwargs):
def get_failure_reason():
# Output is a tuple (package, version), or None.
lastlines = decode_bytes(subprocess.Popen(
- ["tail", "-n", "3", os.path.join(outputdir, "logfile")],
+ ["tail", "-n", "4", os.path.join(outputdir, "logfile")],
stdout=subprocess.PIPE).communicate()[0]).splitlines()
- regexp = re.compile(r'make: \*\*\* .*/(?:build|toolchain)/([^/]*)/')
+ regexp = re.compile(r'make.*: \*\*\* .*/(?:build|toolchain)/([^/]*)/')
for line in lastlines:
m = regexp.search(line)
if m:
diff --git a/web/import.inc.php b/web/import.inc.php
index 243a1f3..e169f6f 100644
--- a/web/import.inc.php
+++ b/web/import.inc.php
@@ -102,7 +102,7 @@ function import_result($buildid, $filename)
$reason = "none";
else {
$tmp = Array();
- exec("tail -3 " . $thisbuildfinaldir . "build-end.log | grep -v '\[_all\]' | grep 'make.*: \*\*\*' | sed 's,.*\[\([^\]*\)\] Error.*,\\1,' | sed 's,.*/build/\([^/]*\)/.*,\\1,'", $tmp);
+ exec("tail -4 " . $thisbuildfinaldir . "build-end.log | grep -v '\[_all\]' | grep 'make.*: \*\*\*' | sed 's,.*\[\([^\]*\)\] Error.*,\\1,' | sed 's,.*/build/\([^/]*\)/.*,\\1,'", $tmp);
if (trim($tmp[0]))
$reason = $tmp[0];
else
--
2.5.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update
2016-04-01 0:02 ` [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update Matt Weber
@ 2016-04-01 1:55 ` Thomas Petazzoni
2016-04-01 2:37 ` Matthew Weber
2016-09-06 20:04 ` Thomas Petazzoni
1 sibling, 1 reply; 12+ messages in thread
From: Thomas Petazzoni @ 2016-04-01 1:55 UTC (permalink / raw)
To: buildroot
Hello,
On Thu, 31 Mar 2016 19:02:52 -0500, Matt Weber wrote:
> - Sub-make required one additional line tailed
Really? Did you look at my previous review, where I showed the
different examples I could find, and showed that 3 lines were enough?
It's not like I care particularly whether we're tailing 3 or 4 lines,
it's more that I want to understand why in your scenario you would need
4 lines.
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update
2016-04-01 1:55 ` Thomas Petazzoni
@ 2016-04-01 2:37 ` Matthew Weber
2016-04-01 3:58 ` Thomas Petazzoni
0 siblings, 1 reply; 12+ messages in thread
From: Matthew Weber @ 2016-04-01 2:37 UTC (permalink / raw)
To: buildroot
Thomas,
On Mar 31, 2016 8:55 PM, "Thomas Petazzoni" <
thomas.petazzoni@free-electrons.com> wrote:
>
> Hello,
>
> On Thu, 31 Mar 2016 19:02:52 -0500, Matt Weber wrote:
> > - Sub-make required one additional line tailed
>
> Really? Did you look at my previous review, where I showed the
> different examples I could find, and showed that 3 lines were enough?
I did and I haven't figured out why yet
>
> It's not like I care particularly whether we're tailing 3 or 4 lines,
> it's more that I want to understand why in your scenario you would need
> 4 lines.
>
> Thanks!
>
> Thomas
> --
> Thomas Petazzoni, CTO, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20160331/6bbbc407/attachment.html>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update
2016-04-01 2:37 ` Matthew Weber
@ 2016-04-01 3:58 ` Thomas Petazzoni
2016-04-01 4:04 ` Matthew Weber
0 siblings, 1 reply; 12+ messages in thread
From: Thomas Petazzoni @ 2016-04-01 3:58 UTC (permalink / raw)
To: buildroot
Hello,
On Thu, 31 Mar 2016 21:37:30 -0500, Matthew Weber wrote:
> > Really? Did you look at my previous review, where I showed the
> > different examples I could find, and showed that 3 lines were enough?
>
> I did and I haven't figured out why yet
Well, can you show the last 10 lines of your build logs, which require
4 lines for the script to detect the failure reason?
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update
2016-04-01 3:58 ` Thomas Petazzoni
@ 2016-04-01 4:04 ` Matthew Weber
2016-04-01 4:21 ` Thomas Petazzoni
0 siblings, 1 reply; 12+ messages in thread
From: Matthew Weber @ 2016-04-01 4:04 UTC (permalink / raw)
To: buildroot
On Thu, Mar 31, 2016 at 10:58 PM, Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote:
> Hello,
>
> On Thu, 31 Mar 2016 21:37:30 -0500, Matthew Weber wrote:
>
>> > Really? Did you look at my previous review, where I showed the
>> > different examples I could find, and showed that 3 lines were enough?
>>
>> I did and I haven't figured out why yet
>
> Well, can you show the last 10 lines of your build logs, which require
> 4 lines for the script to detect the failure reason?
>
^
futility/cmd_gbb_utility.c: In function 'do_gbb_utility':
futility/cmd_gbb_utility.c:558:5: warning: format '%lli' expects
argument of type 'long long int', but argument 3 has type 'off_t {aka
long int}' [-Wformat=]
"ERROR: can't malloc %" PRIi64 " bytes: %s\n",
^
CC futility/ryu_root_header.o
CC firmware/stub/vboot_api_stub_static_sf.o
GEN gen/futility_static_cmds.c
CC cgpt/cgpt_create.o
CC cgpt/cgpt_add.o
CC cgpt/cgpt_boot.o
CC cgpt/cgpt_show.o
CC cgpt/cgpt_repair.o
CC cgpt/cgpt_prioritize.o
CC cgpt/cgpt_common.o
make[2]: *** No rule to make target
'/opt/buildroot_testing/buildroot-test/instance-0/output/build/host-vboot-utils-bbdd62f9b030db7ad8eef789aaf58a7ff9a25656/build/host/arch/i686/lib/crossystem_arch.o',
needed by '/opt/buildroot_testing/buildroot-test/instance-0/output/build/host-vboot-utils-bbdd62f9b030db7ad8eef789aaf58a7ff9a25656/build/libvboot_util.a'.
Stop.
make[2]: *** Waiting for unfinished jobs....
CC futility/dump_kernel_config_lib.o
package/pkg-generic.mk:195: recipe for target
'/opt/buildroot_testing/buildroot-test/instance-0/output/build/host-vboot-utils-bbdd62f9b030db7ad8eef789aaf58a7ff9a25656/.stamp_built'
failed
make[1]: *** [/opt/buildroot_testing/buildroot-test/instance-0/output/build/host-vboot-utils-bbdd62f9b030db7ad8eef789aaf58a7ff9a25656/.stamp_built]
Error 2
Makefile:36: recipe for target '_all' failed
make: *** [_all] Error 2
make: Leaving directory
'/opt/buildroot_testing/buildroot-test/instance-0/buildroot'
--
Thanks,
Matt
^ permalink raw reply [flat|nested] 12+ messages in thread* [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update
2016-04-01 4:04 ` Matthew Weber
@ 2016-04-01 4:21 ` Thomas Petazzoni
0 siblings, 0 replies; 12+ messages in thread
From: Thomas Petazzoni @ 2016-04-01 4:21 UTC (permalink / raw)
To: buildroot
Hello,
On Thu, 31 Mar 2016 23:04:57 -0500, Matthew Weber wrote:
> make[1]: *** [/opt/buildroot_testing/buildroot-test/instance-0/output/build/host-vboot-utils-bbdd62f9b030db7ad8eef789aaf58a7ff9a25656/.stamp_built] Error 2
> Makefile:36: recipe for target '_all' failed
> make: *** [_all] Error 2
> make: Leaving directory '/opt/buildroot_testing/buildroot-test/instance-0/buildroot'
Weird, this is this last line that I don't see here:
make[1]: *** [/home/thomas/projets/outputs/toto/build/makedevs-buildroot-2016.05-git/.stamp_built] Error 127
Makefile:16: recipe for target '_all' failed
make: *** [_all] Error 2
But on the other hand,
http://autobuild.buildroot.org/results/b55/b5539c22ee35a36ae3fe4967040ea04b11889a4c/build-end.log
has this last line, but doesn't have the "recipe for target ... failed"
line.
Oh well, I guess I'm just going to take your patch as-is. Maybe some
make guru like Arnout will have a good explanation for those
differences, but it's not important enough to spend too much time on
this.
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update
2016-04-01 0:02 ` [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update Matt Weber
2016-04-01 1:55 ` Thomas Petazzoni
@ 2016-09-06 20:04 ` Thomas Petazzoni
2016-09-06 21:20 ` Yann E. MORIN
2016-09-07 7:17 ` Thomas Petazzoni
1 sibling, 2 replies; 12+ messages in thread
From: Thomas Petazzoni @ 2016-09-06 20:04 UTC (permalink / raw)
To: buildroot
Hello,
On Thu, 31 Mar 2016 19:02:52 -0500, Matt Weber wrote:
> - Sub-make required one additional line tailed
> - Both autobuild-run regex to truncate end log
> and import which sets the failure reason on
> the report are updated
>
> Signed-off-by: Matt Weber <matt@thewebers.ws>
>
> --
> Changes for v2:
> - Added back in : as previous test masked
> that is was ok to leave in (Suggested by Thomas)
> ---
> scripts/autobuild-run | 4 ++--
> web/import.inc.php | 2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
Applied to buildroot-test, and deployed on autobuild.b.o. Of course,
it's up to the people using autobuild-run to update it on their side.
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update
2016-09-06 20:04 ` Thomas Petazzoni
@ 2016-09-06 21:20 ` Yann E. MORIN
2016-09-07 7:17 ` Thomas Petazzoni
1 sibling, 0 replies; 12+ messages in thread
From: Yann E. MORIN @ 2016-09-06 21:20 UTC (permalink / raw)
To: buildroot
Thomas, Matt,
On 2016-09-06 22:04 +0200, Thomas Petazzoni spake thusly:
> On Thu, 31 Mar 2016 19:02:52 -0500, Matt Weber wrote:
> > - Sub-make required one additional line tailed
> > - Both autobuild-run regex to truncate end log
> > and import which sets the failure reason on
> > the report are updated
> >
> > Signed-off-by: Matt Weber <matt@thewebers.ws>
> >
> > --
> > Changes for v2:
> > - Added back in : as previous test masked
> > that is was ok to leave in (Suggested by Thomas)
> > ---
> > scripts/autobuild-run | 4 ++--
> > web/import.inc.php | 2 +-
> > 2 files changed, 3 insertions(+), 3 deletions(-)
>
> Applied to buildroot-test, and deployed on autobuild.b.o. Of course,
> it's up to the people using autobuild-run to update it on their side.
Done! ;-)
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update
2016-09-06 20:04 ` Thomas Petazzoni
2016-09-06 21:20 ` Yann E. MORIN
@ 2016-09-07 7:17 ` Thomas Petazzoni
2016-09-07 8:59 ` Yann E. MORIN
1 sibling, 1 reply; 12+ messages in thread
From: Thomas Petazzoni @ 2016-09-07 7:17 UTC (permalink / raw)
To: buildroot
Hello,
On Tue, 6 Sep 2016 22:04:59 +0200, Thomas Petazzoni wrote:
> Hello,
>
> On Thu, 31 Mar 2016 19:02:52 -0500, Matt Weber wrote:
> > - Sub-make required one additional line tailed
> > - Both autobuild-run regex to truncate end log
> > and import which sets the failure reason on
> > the report are updated
> >
> > Signed-off-by: Matt Weber <matt@thewebers.ws>
> >
> > --
> > Changes for v2:
> > - Added back in : as previous test masked
> > that is was ok to leave in (Suggested by Thomas)
> > ---
> > scripts/autobuild-run | 4 ++--
> > web/import.inc.php | 2 +-
> > 2 files changed, 3 insertions(+), 3 deletions(-)
>
> Applied to buildroot-test, and deployed on autobuild.b.o. Of course,
> it's up to the people using autobuild-run to update it on their side.
And I just reverted this commit, as it broke the autobuilders. For a
large number of builds, the failure reason was no longer identified
properly, and the script was concluding that the failure reason was
"all" or "all-recursive" or "lib", i.e the name of a make target, and
not the name of the package.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update
2016-09-07 7:17 ` Thomas Petazzoni
@ 2016-09-07 8:59 ` Yann E. MORIN
0 siblings, 0 replies; 12+ messages in thread
From: Yann E. MORIN @ 2016-09-07 8:59 UTC (permalink / raw)
To: buildroot
Thomas, All,
On 2016-09-07 09:17 +0200, Thomas Petazzoni spake thusly:
> On Tue, 6 Sep 2016 22:04:59 +0200, Thomas Petazzoni wrote:
> > Hello,
> >
> > On Thu, 31 Mar 2016 19:02:52 -0500, Matt Weber wrote:
> > > - Sub-make required one additional line tailed
> > > - Both autobuild-run regex to truncate end log
> > > and import which sets the failure reason on
> > > the report are updated
> > >
> > > Signed-off-by: Matt Weber <matt@thewebers.ws>
> > >
> > > --
> > > Changes for v2:
> > > - Added back in : as previous test masked
> > > that is was ok to leave in (Suggested by Thomas)
> > > ---
> > > scripts/autobuild-run | 4 ++--
> > > web/import.inc.php | 2 +-
> > > 2 files changed, 3 insertions(+), 3 deletions(-)
> >
> > Applied to buildroot-test, and deployed on autobuild.b.o. Of course,
> > it's up to the people using autobuild-run to update it on their side.
>
> And I just reverted this commit, as it broke the autobuilders. For a
> large number of builds, the failure reason was no longer identified
> properly, and the script was concluding that the failure reason was
> "all" or "all-recursive" or "lib", i.e the name of a make target, and
> not the name of the package.
OK, updated and restarted. ;-)
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Buildroot] [PATCH v2 1/2] buildroot-test: enable toolchains based on hostarch
2016-04-01 0:02 [Buildroot] [PATCH v2 1/2] buildroot-test: enable toolchains based on hostarch Matt Weber
2016-04-01 0:02 ` [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update Matt Weber
@ 2016-04-21 21:05 ` Thomas Petazzoni
1 sibling, 0 replies; 12+ messages in thread
From: Thomas Petazzoni @ 2016-04-21 21:05 UTC (permalink / raw)
To: buildroot
Hello,
On Thu, 31 Mar 2016 19:02:51 -0500, Matt Weber wrote:
> - updated toolchain csv to include hostarch
> - fixed logic in autobuild-run to correctly select any, x86_64 vs x86
>
> Signed-off-by: Matt Weber <matt@thewebers.ws>
>
> --
> Changes for v2
> - Updated toolchain csv file to have internal configs
> listed as any type (Suggested by Thomas)
> - Updated autobuild-run script to account for 'any' hostarch
> type as well as x86_64 being capable of running x86 toolchains
> (Sgggested by Thomas)
> ---
> scripts/autobuild-run | 25 +++++++++++--
> web/toolchains/configs/toolchain-configs.csv | 56 ++++++++++++++--------------
> 2 files changed, 49 insertions(+), 32 deletions(-)
Applied to buildroot-test, thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2016-09-07 8:59 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-01 0:02 [Buildroot] [PATCH v2 1/2] buildroot-test: enable toolchains based on hostarch Matt Weber
2016-04-01 0:02 ` [Buildroot] [PATCH v2 2/2] buildroot-test: failure reason regex update Matt Weber
2016-04-01 1:55 ` Thomas Petazzoni
2016-04-01 2:37 ` Matthew Weber
2016-04-01 3:58 ` Thomas Petazzoni
2016-04-01 4:04 ` Matthew Weber
2016-04-01 4:21 ` Thomas Petazzoni
2016-09-06 20:04 ` Thomas Petazzoni
2016-09-06 21:20 ` Yann E. MORIN
2016-09-07 7:17 ` Thomas Petazzoni
2016-09-07 8:59 ` Yann E. MORIN
2016-04-21 21:05 ` [Buildroot] [PATCH v2 1/2] buildroot-test: enable toolchains based on hostarch Thomas Petazzoni
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.