* [PATCH 01/47] ARM: dts: r8a7790: use fallback jpu compatibility string
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
Use recently added fallback compatibility string in r8a7790 device trees.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7790.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 38b706399a6b..0967f231f4f4 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -990,7 +990,7 @@
};
jpu: jpeg-codec at fe980000 {
- compatible = "renesas,jpu-r8a7790";
+ compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
reg = <0 0xfe980000 0 0x10300>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_JPU>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 02/47] ARM: dts: r8a7791: use fallback jpu compatibility string
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Use recently added fallback compatibility string in r8a7791 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7791.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6439f0569fe2..9bfd1dc054b3 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1035,7 +1035,7 @@
};
jpu: jpeg-codec@fe980000 {
- compatible = "renesas,jpu-r8a7791";
+ compatible = "renesas,jpu-r8a7791", "renesas,rcar-gen2-jpu";
reg = <0 0xfe980000 0 0x10300>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_JPU>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 02/47] ARM: dts: r8a7791: use fallback jpu compatibility string
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
Use recently added fallback compatibility string in r8a7791 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7791.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6439f0569fe2..9bfd1dc054b3 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1035,7 +1035,7 @@
};
jpu: jpeg-codec at fe980000 {
- compatible = "renesas,jpu-r8a7791";
+ compatible = "renesas,jpu-r8a7791", "renesas,rcar-gen2-jpu";
reg = <0 0xfe980000 0 0x10300>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_JPU>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 03/47] ARM: dts: r8a7790: Add SCIF2 clock
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Based on Rev. 2.00 of the R-Car Gen2 datasheet.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 6 +++---
include/dt-bindings/clock/r8a7790-clock.h | 1 +
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 0967f231f4f4..cc4974a348d9 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1334,19 +1334,19 @@
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
+ clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&p_clk>, <&sd3_clk>,
<&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
<&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
<&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <
- R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
+ R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SCIF2 R8A7790_CLK_SDHI3
R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1
R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1
>;
clock-output-names =
- "iic2", "tpu0", "mmcif1", "sdhi3",
+ "iic2", "tpu0", "mmcif1", "scif2", "sdhi3",
"sdhi2", "sdhi1", "sdhi0", "mmcif0",
"iic0", "pciec", "iic1", "ssusb", "cmt1",
"usbdmac0", "usbdmac1";
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index 7b1ad8922eec..fa5e8da809f2 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -66,6 +66,7 @@
#define R8A7790_CLK_IIC2 0
#define R8A7790_CLK_TPU0 4
#define R8A7790_CLK_MMCIF1 5
+#define R8A7790_CLK_SCIF2 10
#define R8A7790_CLK_SDHI3 11
#define R8A7790_CLK_SDHI2 12
#define R8A7790_CLK_SDHI1 13
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 03/47] ARM: dts: r8a7790: Add SCIF2 clock
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Based on Rev. 2.00 of the R-Car Gen2 datasheet.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 6 +++---
include/dt-bindings/clock/r8a7790-clock.h | 1 +
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 0967f231f4f4..cc4974a348d9 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1334,19 +1334,19 @@
mstp3_clks: mstp3_clks at e615013c {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
+ clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&p_clk>, <&sd3_clk>,
<&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
<&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
<&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <
- R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
+ R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SCIF2 R8A7790_CLK_SDHI3
R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1
R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1
>;
clock-output-names =
- "iic2", "tpu0", "mmcif1", "sdhi3",
+ "iic2", "tpu0", "mmcif1", "scif2", "sdhi3",
"sdhi2", "sdhi1", "sdhi0", "mmcif0",
"iic0", "pciec", "iic1", "ssusb", "cmt1",
"usbdmac0", "usbdmac1";
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index 7b1ad8922eec..fa5e8da809f2 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -66,6 +66,7 @@
#define R8A7790_CLK_IIC2 0
#define R8A7790_CLK_TPU0 4
#define R8A7790_CLK_MMCIF1 5
+#define R8A7790_CLK_SCIF2 10
#define R8A7790_CLK_SDHI3 11
#define R8A7790_CLK_SDHI2 12
#define R8A7790_CLK_SDHI1 13
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 04/47] ARM: dts: r8a7790: Add SCIF2 device node
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (2 preceding siblings ...)
2016-04-04 1:22 ` Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (43 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index cc4974a348d9..b2d6a0f6105c 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -732,6 +732,20 @@
status = "disabled";
};
+ scif2: serial at e6e56000 {
+ compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif",
+ "renesas,scif";
+ reg = <0 0xe6e56000 0 64>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
hscif0: serial at e62c0000 {
compatible = "renesas,hscif-r8a7790",
"renesas,rcar-gen2-hscif", "renesas,hscif";
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 05/47] ARM: dts: r8a7791: use fallback can compatibility string
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Use recently added fallback compatibility string in r8a7791 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7791.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 9bfd1dc054b3..396a640927c8 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1013,7 +1013,7 @@
};
can0: can@e6e80000 {
- compatible = "renesas,can-r8a7791";
+ compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
reg = <0 0xe6e80000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
@@ -1024,7 +1024,7 @@
};
can1: can@e6e88000 {
- compatible = "renesas,can-r8a7791";
+ compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
reg = <0 0xe6e88000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 05/47] ARM: dts: r8a7791: use fallback can compatibility string
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
Use recently added fallback compatibility string in r8a7791 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7791.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 9bfd1dc054b3..396a640927c8 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1013,7 +1013,7 @@
};
can0: can at e6e80000 {
- compatible = "renesas,can-r8a7791";
+ compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
reg = <0 0xe6e80000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
@@ -1024,7 +1024,7 @@
};
can1: can at e6e88000 {
- compatible = "renesas,can-r8a7791";
+ compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
reg = <0 0xe6e88000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 06/47] ARM: dts: r8a7790: use fallback can compatibility string
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Use recently added fallback compatibility string in r8a7790 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7790.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index b2d6a0f6105c..0077de70b6a4 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -982,7 +982,7 @@
};
can0: can@e6e80000 {
- compatible = "renesas,can-r8a7790";
+ compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can";
reg = <0 0xe6e80000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
@@ -993,7 +993,7 @@
};
can1: can@e6e88000 {
- compatible = "renesas,can-r8a7790";
+ compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can";
reg = <0 0xe6e88000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 06/47] ARM: dts: r8a7790: use fallback can compatibility string
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
Use recently added fallback compatibility string in r8a7790 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7790.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index b2d6a0f6105c..0077de70b6a4 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -982,7 +982,7 @@
};
can0: can at e6e80000 {
- compatible = "renesas,can-r8a7790";
+ compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can";
reg = <0 0xe6e80000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
@@ -993,7 +993,7 @@
};
can1: can at e6e88000 {
- compatible = "renesas,can-r8a7790";
+ compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can";
reg = <0 0xe6e88000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 07/47] ARM: dts: r8a7790: Reference both DMA controllers in SCIFA nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 0077de70b6a4..7d9ff0bde857 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -633,8 +633,9 @@
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -646,8 +647,9 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -659,8 +661,9 @@
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 07/47] ARM: dts: r8a7790: Reference both DMA controllers in SCIFA nodes
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 0077de70b6a4..7d9ff0bde857 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -633,8 +633,9 @@
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -646,8 +647,9 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -659,8 +661,9 @@
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 08/47] ARM: dts: r8a7790: Reference both DMA controllers in SCIFB nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 7d9ff0bde857..13e8817e9cfe 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -675,8 +675,9 @@
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -688,8 +689,9 @@
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -701,8 +703,9 @@
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 08/47] ARM: dts: r8a7790: Reference both DMA controllers in SCIFB nodes
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 7d9ff0bde857..13e8817e9cfe 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -675,8 +675,9 @@
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -688,8 +689,9 @@
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -701,8 +703,9 @@
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 09/47] ARM: dts: r8a7790: Reference both DMA controllers in HSCIF nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (7 preceding siblings ...)
2016-04-04 1:22 ` Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (38 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 13e8817e9cfe..2c0249395261 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -760,8 +760,9 @@
clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -774,8 +775,9 @@
clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 10/47] ARM: dts: r8a7790: Reference both DMA controllers in SCIF nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 2c0249395261..fe1e9952d14b 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -718,8 +718,9 @@
clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -732,8 +733,9 @@
clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -746,8 +748,9 @@
clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 10/47] ARM: dts: r8a7790: Reference both DMA controllers in SCIF nodes
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 2c0249395261..fe1e9952d14b 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -718,8 +718,9 @@
clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -732,8 +733,9 @@
clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -746,8 +748,9 @@
clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 11/47] ARM: dts: r8a7790: Reference both DMA controllers in MSIOF nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (9 preceding siblings ...)
2016-04-04 1:22 ` Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (36 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index fe1e9952d14b..102973c50294 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1508,8 +1508,9 @@
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
- dmas = <&dmac0 0x51>, <&dmac0 0x52>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+ <&dmac1 0x51>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1521,8 +1522,9 @@
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
- dmas = <&dmac0 0x55>, <&dmac0 0x56>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+ <&dmac1 0x55>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1534,8 +1536,9 @@
reg = <0 0xe6e00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
- dmas = <&dmac0 0x41>, <&dmac0 0x42>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+ <&dmac1 0x41>, <&dmac1 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1547,8 +1550,9 @@
reg = <0 0xe6c90000 0 0x0064>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
- dmas = <&dmac0 0x45>, <&dmac0 0x46>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x45>, <&dmac0 0x46>,
+ <&dmac1 0x45>, <&dmac1 0x46>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 12/47] ARM: dts: r8a7790: Reference both DMA controllers in QSPI node
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 102973c50294..a80791aaa2f4 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1494,8 +1494,9 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 12/47] ARM: dts: r8a7790: Reference both DMA controllers in QSPI node
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 102973c50294..a80791aaa2f4 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1494,8 +1494,9 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 13/47] ARM: dts: r8a7790: Reference both DMA controllers in IIC nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index a80791aaa2f4..cfa91f0a328f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -506,8 +506,9 @@
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -519,8 +520,9 @@
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -532,8 +534,9 @@
reg = <0 0xe6520000 0 0x425>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
- dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
+ <&dmac1 0x69>, <&dmac1 0x6a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -545,8 +548,9 @@
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
- dmas = <&dmac0 0x77>, <&dmac0 0x78>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 13/47] ARM: dts: r8a7790: Reference both DMA controllers in IIC nodes
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index a80791aaa2f4..cfa91f0a328f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -506,8 +506,9 @@
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -519,8 +520,9 @@
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -532,8 +534,9 @@
reg = <0 0xe6520000 0 0x425>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
- dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
+ <&dmac1 0x69>, <&dmac1 0x6a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -545,8 +548,9 @@
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
- dmas = <&dmac0 0x77>, <&dmac0 0x78>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 14/47] ARM: dts: r8a7790: Reference both DMA controllers in SDHI nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index cfa91f0a328f..31b9b0abf458 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -591,8 +591,9 @@
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
- dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xcd>, <&dmac1 0xce>,
+ <&dmac0 0xcd>, <&dmac0 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -602,8 +603,9 @@
reg = <0 0xee120000 0 0x328>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
- dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xc9>, <&dmac1 0xca>,
+ <&dmac0 0xc9>, <&dmac0 0xca>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -613,8 +615,9 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
- dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xc1>, <&dmac1 0xc2>,
+ <&dmac0 0xc1>, <&dmac0 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -624,8 +627,9 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
- dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xd3>, <&dmac1 0xd4>,
+ <&dmac0 0xd3>, <&dmac0 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 14/47] ARM: dts: r8a7790: Reference both DMA controllers in SDHI nodes
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index cfa91f0a328f..31b9b0abf458 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -591,8 +591,9 @@
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
- dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xcd>, <&dmac1 0xce>,
+ <&dmac0 0xcd>, <&dmac0 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -602,8 +603,9 @@
reg = <0 0xee120000 0 0x328>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
- dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xc9>, <&dmac1 0xca>,
+ <&dmac0 0xc9>, <&dmac0 0xca>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -613,8 +615,9 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
- dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xc1>, <&dmac1 0xc2>,
+ <&dmac0 0xc1>, <&dmac0 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -624,8 +627,9 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
- dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xd3>, <&dmac1 0xd4>,
+ <&dmac0 0xd3>, <&dmac0 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 15/47] ARM: dts: r8a7790: Reference both DMA controllers in MMCIF nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 31b9b0abf458..b71b3e20b6e4 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -560,8 +560,9 @@
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
- dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
reg-io-width = <4>;
status = "disabled";
@@ -573,8 +574,9 @@
reg = <0 0xee220000 0 0x80>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
- dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
+ <&dmac1 0xe1>, <&dmac1 0xe2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
reg-io-width = <4>;
status = "disabled";
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 15/47] ARM: dts: r8a7790: Reference both DMA controllers in MMCIF nodes
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 31b9b0abf458..b71b3e20b6e4 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -560,8 +560,9 @@
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
- dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
reg-io-width = <4>;
status = "disabled";
@@ -573,8 +574,9 @@
reg = <0 0xee220000 0 0x80>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
- dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
+ <&dmac1 0xe1>, <&dmac1 0xe2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
reg-io-width = <4>;
status = "disabled";
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 16/47] ARM: dts: r8a7791: Reference both DMA controllers in SCIFA nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (14 preceding siblings ...)
2016-04-04 1:22 ` Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 17/47] ARM: dts: r8a7791: Reference both DMA controllers in SCIFB nodes Simon Horman
` (31 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 396a640927c8..4de4812ccf72 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -600,8 +600,9 @@
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -613,8 +614,9 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -626,8 +628,9 @@
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -639,8 +642,9 @@
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
clock-names = "fck";
- dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -652,8 +656,9 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
clock-names = "fck";
- dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -665,8 +670,9 @@
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
clock-names = "fck";
- dmas = <&dmac0 0x23>, <&dmac0 0x24>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 17/47] ARM: dts: r8a7791: Reference both DMA controllers in SCIFB nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (15 preceding siblings ...)
2016-04-04 1:22 ` [PATCH 16/47] ARM: dts: r8a7791: Reference both DMA controllers in SCIFA nodes Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (30 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 4de4812ccf72..319e34cdc34a 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -684,8 +684,9 @@
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -697,8 +698,9 @@
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -710,8 +712,9 @@
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 18/47] ARM: dts: r8a7791: Reference both DMA controllers in HSCIF nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 319e34cdc34a..7854a4f9aefe 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -811,8 +811,9 @@
clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -825,8 +826,9 @@
clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -839,8 +841,9 @@
clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 18/47] ARM: dts: r8a7791: Reference both DMA controllers in HSCIF nodes
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 319e34cdc34a..7854a4f9aefe 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -811,8 +811,9 @@
clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -825,8 +826,9 @@
clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -839,8 +841,9 @@
clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 19/47] ARM: dts: r8a7791: Reference both DMA controllers in SCIF nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 7854a4f9aefe..76c8da8bf10e 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -727,8 +727,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -741,8 +742,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -755,8 +757,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -769,8 +772,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -783,8 +787,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -797,8 +802,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 19/47] ARM: dts: r8a7791: Reference both DMA controllers in SCIF nodes
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 7854a4f9aefe..76c8da8bf10e 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -727,8 +727,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -741,8 +742,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -755,8 +757,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -769,8 +772,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -783,8 +787,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -797,8 +802,9 @@
clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 20/47] ARM: dts: r8a7791: Reference both DMA controllers in MSIOF nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (18 preceding siblings ...)
2016-04-04 1:22 ` Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (27 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 76c8da8bf10e..4d0d7a7cba2d 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1532,8 +1532,9 @@
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
- dmas = <&dmac0 0x51>, <&dmac0 0x52>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+ <&dmac1 0x51>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1545,8 +1546,9 @@
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
- dmas = <&dmac0 0x55>, <&dmac0 0x56>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+ <&dmac1 0x55>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1558,8 +1560,9 @@
reg = <0 0xe6e00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
- dmas = <&dmac0 0x41>, <&dmac0 0x42>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+ <&dmac1 0x41>, <&dmac1 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 21/47] ARM: dts: r8a7791: Reference both DMA controllers in QSPI node
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 4d0d7a7cba2d..8880e22ace5e 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1518,8 +1518,9 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 21/47] ARM: dts: r8a7791: Reference both DMA controllers in QSPI node
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 4d0d7a7cba2d..8880e22ace5e 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1518,8 +1518,9 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 22/47] ARM: dts: r8a7791: Reference both DMA controllers in IIC nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 8880e22ace5e..9acecdfed5a7 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -510,8 +510,9 @@
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
- dmas = <&dmac0 0x77>, <&dmac0 0x78>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -523,8 +524,9 @@
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -536,8 +538,9 @@
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 22/47] ARM: dts: r8a7791: Reference both DMA controllers in IIC nodes
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 8880e22ace5e..9acecdfed5a7 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -510,8 +510,9 @@
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
- dmas = <&dmac0 0x77>, <&dmac0 0x78>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -523,8 +524,9 @@
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -536,8 +538,9 @@
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 23/47] ARM: dts: r8a7791: Reference both DMA controllers in SDHI nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 9acecdfed5a7..145c5aa0a134 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -568,8 +568,9 @@
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
- dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xcd>, <&dmac1 0xce>,
+ <&dmac0 0xcd>, <&dmac0 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -579,8 +580,9 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
- dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xc1>, <&dmac1 0xc2>,
+ <&dmac0 0xc1>, <&dmac0 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -590,8 +592,9 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
- dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xd3>, <&dmac1 0xd4>,
+ <&dmac0 0xd3>, <&dmac0 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 23/47] ARM: dts: r8a7791: Reference both DMA controllers in SDHI nodes
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 9acecdfed5a7..145c5aa0a134 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -568,8 +568,9 @@
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
- dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xcd>, <&dmac1 0xce>,
+ <&dmac0 0xcd>, <&dmac0 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -579,8 +580,9 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
- dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xc1>, <&dmac1 0xc2>,
+ <&dmac0 0xc1>, <&dmac0 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -590,8 +592,9 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
- dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
- dma-names = "tx", "rx";
+ dmas = <&dmac1 0xd3>, <&dmac1 0xd4>,
+ <&dmac0 0xd3>, <&dmac0 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 24/47] ARM: dts: r8a7791: Reference both DMA controllers in MMCIF node
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 145c5aa0a134..5f89b5863d94 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -555,8 +555,9 @@
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
- dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
reg-io-width = <4>;
status = "disabled";
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 24/47] ARM: dts: r8a7791: Reference both DMA controllers in MMCIF node
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 145c5aa0a134..5f89b5863d94 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -555,8 +555,9 @@
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
- dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
reg-io-width = <4>;
status = "disabled";
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 25/47] ARM: dts: r8a7793: Reference both DMA controllers in SCIFA nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (23 preceding siblings ...)
2016-04-04 1:22 ` Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 26/47] ARM: dts: r8a7793: Reference both DMA controllers in SCIFB nodes Simon Horman
` (22 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index b48215945241..d83342306dea 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -514,8 +514,9 @@
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -527,8 +528,9 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -540,8 +542,9 @@
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -553,8 +556,9 @@
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
clock-names = "fck";
- dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -566,8 +570,9 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
clock-names = "fck";
- dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -579,8 +584,9 @@
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
clock-names = "fck";
- dmas = <&dmac0 0x23>, <&dmac0 0x24>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 26/47] ARM: dts: r8a7793: Reference both DMA controllers in SCIFB nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (24 preceding siblings ...)
2016-04-04 1:22 ` [PATCH 25/47] ARM: dts: r8a7793: Reference both DMA controllers in SCIFA nodes Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (21 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index d83342306dea..d70479085b13 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -598,8 +598,9 @@
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -611,8 +612,9 @@
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -624,8 +626,9 @@
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 27/47] ARM: dts: r8a7793: Reference both DMA controllers in HSCIF nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index d70479085b13..be2e1fdfb07b 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -725,8 +725,9 @@
clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -739,8 +740,9 @@
clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -753,8 +755,9 @@
clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 27/47] ARM: dts: r8a7793: Reference both DMA controllers in HSCIF nodes
@ 2016-04-04 1:22 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:22 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index d70479085b13..be2e1fdfb07b 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -725,8 +725,9 @@
clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -739,8 +740,9 @@
clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -753,8 +755,9 @@
clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 28/47] ARM: dts: r8a7793: Reference both DMA controllers in SCIF nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index be2e1fdfb07b..88164ac44929 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -641,8 +641,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -655,8 +656,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -669,8 +671,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -683,8 +686,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -697,8 +701,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -711,8 +716,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 28/47] ARM: dts: r8a7793: Reference both DMA controllers in SCIF nodes
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index be2e1fdfb07b..88164ac44929 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -641,8 +641,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -655,8 +656,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -669,8 +671,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -683,8 +686,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -697,8 +701,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -711,8 +716,9 @@
clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 29/47] ARM: dts: r8a7793: Reference both DMA controllers in QSPI node
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (27 preceding siblings ...)
2016-04-04 1:23 ` Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` Simon Horman
` (18 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 88164ac44929..b16b0cca638c 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -785,8 +785,9 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 30/47] ARM: dts: r8a7793: Reference both DMA controllers in IIC nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index b16b0cca638c..90925c5d14d0 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -470,8 +470,9 @@
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
- dmas = <&dmac0 0x77>, <&dmac0 0x78>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -483,8 +484,9 @@
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -496,8 +498,9 @@
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 30/47] ARM: dts: r8a7793: Reference both DMA controllers in IIC nodes
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index b16b0cca638c..90925c5d14d0 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -470,8 +470,9 @@
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
- dmas = <&dmac0 0x77>, <&dmac0 0x78>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -483,8 +484,9 @@
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -496,8 +498,9 @@
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 31/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFA nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index eacb2b291361..4256557ca041 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -296,8 +296,9 @@
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -309,8 +310,9 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -322,8 +324,9 @@
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -335,8 +338,9 @@
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
clock-names = "fck";
- dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -348,8 +352,9 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
clock-names = "fck";
- dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -361,8 +366,9 @@
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
clock-names = "fck";
- dmas = <&dmac0 0x23>, <&dmac0 0x24>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 31/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFA nodes
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index eacb2b291361..4256557ca041 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -296,8 +296,9 @@
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -309,8 +310,9 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -322,8 +324,9 @@
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -335,8 +338,9 @@
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
clock-names = "fck";
- dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -348,8 +352,9 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
clock-names = "fck";
- dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -361,8 +366,9 @@
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
clock-names = "fck";
- dmas = <&dmac0 0x23>, <&dmac0 0x24>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 32/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFB nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 4256557ca041..ccf3061a71b2 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -380,8 +380,9 @@
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -393,8 +394,9 @@
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -406,8 +408,9 @@
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 32/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFB nodes
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 4256557ca041..ccf3061a71b2 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -380,8 +380,9 @@
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -393,8 +394,9 @@
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -406,8 +408,9 @@
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 33/47] ARM: dts: r8a7794: Reference both DMA controllers in HSCIF nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index ccf3061a71b2..bc6515303015 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -507,8 +507,9 @@
clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -521,8 +522,9 @@
clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -535,8 +537,9 @@
clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 33/47] ARM: dts: r8a7794: Reference both DMA controllers in HSCIF nodes
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index ccf3061a71b2..bc6515303015 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -507,8 +507,9 @@
clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -521,8 +522,9 @@
clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -535,8 +537,9 @@
clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 34/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIF nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index bc6515303015..982f089f218e 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -423,8 +423,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -437,8 +438,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -451,8 +453,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -465,8 +468,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -479,8 +483,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -493,8 +498,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 34/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIF nodes
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index bc6515303015..982f089f218e 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -423,8 +423,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -437,8 +438,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -451,8 +453,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -465,8 +468,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -479,8 +483,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -493,8 +498,9 @@
clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 35/47] ARM: dts: r8a7794: Reference both DMA controllers in QSPI node
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 982f089f218e..4761849cb1f7 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -691,8 +691,9 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 35/47] ARM: dts: r8a7794: Reference both DMA controllers in QSPI node
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 982f089f218e..4761849cb1f7 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -691,8 +691,9 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 36/47] ARM: dts: r8a7794: Reference both DMA controllers in SDHI nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Niklas Söderlund, Simon Horman
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 4761849cb1f7..ec54246879b4 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -664,6 +664,9 @@
reg = <0 0xee100000 0 0x200>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
+ dmas = <&dmac1 0xcd>, <&dmac1 0xce>,
+ <&dmac0 0xcd>, <&dmac0 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -673,6 +676,9 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
+ dmas = <&dmac1 0xc1>, <&dmac1 0xc2>,
+ <&dmac0 0xc1>, <&dmac0 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -682,6 +688,9 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
+ dmas = <&dmac1 0xd3>, <&dmac1 0xd4>,
+ <&dmac0 0xd3>, <&dmac0 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 36/47] ARM: dts: r8a7794: Reference both DMA controllers in SDHI nodes
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 4761849cb1f7..ec54246879b4 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -664,6 +664,9 @@
reg = <0 0xee100000 0 0x200>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
+ dmas = <&dmac1 0xcd>, <&dmac1 0xce>,
+ <&dmac0 0xcd>, <&dmac0 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -673,6 +676,9 @@
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
+ dmas = <&dmac1 0xc1>, <&dmac1 0xc2>,
+ <&dmac0 0xc1>, <&dmac0 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -682,6 +688,9 @@
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
+ dmas = <&dmac1 0xd3>, <&dmac1 0xd4>,
+ <&dmac0 0xd3>, <&dmac0 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 37/47] ARM: dts: r8a7794: Reference both DMA controllers in MMCIF node
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (35 preceding siblings ...)
2016-04-04 1:23 ` Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` Simon Horman
` (10 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.
Signed-off-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index ec54246879b4..1219f7509433 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -652,8 +652,9 @@
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
- dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&cpg_clocks>;
reg-io-width = <4>;
status = "disabled";
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 38/47] ARM: dts: r8a7794: add CAN clocks to device tree
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Add CAN nodes to r8a7794 device tree.
Based on work by Sergei Shtylyov for the r8a7791 SoC.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
---
arch/arm/boot/dts/r8a7794.dtsi | 33 ++++++++++++++++++++++++-------
include/dt-bindings/clock/r8a7794-clock.h | 3 +++
2 files changed, 29 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 1219f7509433..840971ce48f2 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -873,6 +873,22 @@
clock-output-names = "extal";
};
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* External SCIF clock */
scif_clk: scif {
compatible = "fixed-clock";
@@ -887,10 +903,11 @@
compatible = "renesas,r8a7794-cpg-clocks",
"renesas,rcar-gen2-cpg-clocks";
reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>;
+ clocks = <&extal_clk &usb_extal_clk>;
#clock-cells = <1>;
clock-output-names = "main", "pll0", "pll1", "pll3",
- "lb", "qspi", "sdh", "sd0", "z";
+ "lb", "qspi", "sdh", "sd0", "z",
+ "rcan";
#power-domain-cells = <0>;
};
/* Variable factor clocks */
@@ -1166,20 +1183,22 @@
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
- <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+ <&cp_clk>, <&cp_clk>, <&cp_clk>, <&p_clk>,
+ <&p_clk>, <&cpg_clocks R8A7794_CLK_QSPI>,
+ <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+ <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5
R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3
R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1
- R8A7794_CLK_GPIO0 R8A7794_CLK_QSPI_MOD
+ R8A7794_CLK_GPIO0 R8A7794_CLK_RCAN1
+ R8A7794_CLK_RCAN0 R8A7794_CLK_QSPI_MOD
R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
R8A7794_CLK_I2C3 R8A7794_CLK_I2C2
R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>;
clock-output-names =
"gpio6", "gpio5", "gpio4", "gpio3", "gpio2",
- "gpio1", "gpio0", "qspi_mod",
+ "gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod",
"i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
};
mstp11_clks: mstp11_clks@e615099c {
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index f843de6bf377..9703fbdb81c8 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -21,6 +21,7 @@
#define R8A7794_CLK_SDH 6
#define R8A7794_CLK_SD0 7
#define R8A7794_CLK_Z 8
+#define R8A7794_CLK_RCAN 9
/* MSTP0 */
#define R8A7794_CLK_MSIOF0 0
@@ -95,6 +96,8 @@
#define R8A7794_CLK_GPIO2 10
#define R8A7794_CLK_GPIO1 11
#define R8A7794_CLK_GPIO0 12
+#define R8A7794_CLK_RCAN1 15
+#define R8A7794_CLK_RCAN0 16
#define R8A7794_CLK_QSPI_MOD 17
#define R8A7794_CLK_I2C5 25
#define R8A7794_CLK_I2C4 27
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 38/47] ARM: dts: r8a7794: add CAN clocks to device tree
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
Add CAN nodes to r8a7794 device tree.
Based on work by Sergei Shtylyov for the r8a7791 SoC.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
---
arch/arm/boot/dts/r8a7794.dtsi | 33 ++++++++++++++++++++++++-------
include/dt-bindings/clock/r8a7794-clock.h | 3 +++
2 files changed, 29 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 1219f7509433..840971ce48f2 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -873,6 +873,22 @@
clock-output-names = "extal";
};
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* External SCIF clock */
scif_clk: scif {
compatible = "fixed-clock";
@@ -887,10 +903,11 @@
compatible = "renesas,r8a7794-cpg-clocks",
"renesas,rcar-gen2-cpg-clocks";
reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>;
+ clocks = <&extal_clk &usb_extal_clk>;
#clock-cells = <1>;
clock-output-names = "main", "pll0", "pll1", "pll3",
- "lb", "qspi", "sdh", "sd0", "z";
+ "lb", "qspi", "sdh", "sd0", "z",
+ "rcan";
#power-domain-cells = <0>;
};
/* Variable factor clocks */
@@ -1166,20 +1183,22 @@
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
- <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+ <&cp_clk>, <&cp_clk>, <&cp_clk>, <&p_clk>,
+ <&p_clk>, <&cpg_clocks R8A7794_CLK_QSPI>,
+ <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+ <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5
R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3
R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1
- R8A7794_CLK_GPIO0 R8A7794_CLK_QSPI_MOD
+ R8A7794_CLK_GPIO0 R8A7794_CLK_RCAN1
+ R8A7794_CLK_RCAN0 R8A7794_CLK_QSPI_MOD
R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
R8A7794_CLK_I2C3 R8A7794_CLK_I2C2
R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>;
clock-output-names =
"gpio6", "gpio5", "gpio4", "gpio3", "gpio2",
- "gpio1", "gpio0", "qspi_mod",
+ "gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod",
"i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
};
mstp11_clks: mstp11_clks at e615099c {
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index f843de6bf377..9703fbdb81c8 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -21,6 +21,7 @@
#define R8A7794_CLK_SDH 6
#define R8A7794_CLK_SD0 7
#define R8A7794_CLK_Z 8
+#define R8A7794_CLK_RCAN 9
/* MSTP0 */
#define R8A7794_CLK_MSIOF0 0
@@ -95,6 +96,8 @@
#define R8A7794_CLK_GPIO2 10
#define R8A7794_CLK_GPIO1 11
#define R8A7794_CLK_GPIO0 12
+#define R8A7794_CLK_RCAN1 15
+#define R8A7794_CLK_RCAN0 16
#define R8A7794_CLK_QSPI_MOD 17
#define R8A7794_CLK_I2C5 25
#define R8A7794_CLK_I2C4 27
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 39/47] ARM: dts: r8a7794: add CAN nodes to device tree
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Add CAN nodes to r8a7794 device tree.
Based on work by Sergei Shtylyov for the r8a7791 SoC.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
---
arch/arm/boot/dts/r8a7794.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 840971ce48f2..e2a4b6bd16a0 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -859,6 +859,28 @@
};
};
+ can0: can@e6e80000 {
+ compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can";
+ reg = <0 0xe6e80000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_RCAN0>,
+ <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ can1: can@e6e88000 {
+ compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can";
+ reg = <0 0xe6e88000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_RCAN1>,
+ <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 39/47] ARM: dts: r8a7794: add CAN nodes to device tree
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
Add CAN nodes to r8a7794 device tree.
Based on work by Sergei Shtylyov for the r8a7791 SoC.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
---
arch/arm/boot/dts/r8a7794.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 840971ce48f2..e2a4b6bd16a0 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -859,6 +859,28 @@
};
};
+ can0: can at e6e80000 {
+ compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can";
+ reg = <0 0xe6e80000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_RCAN0>,
+ <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ can1: can at e6e88000 {
+ compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can";
+ reg = <0 0xe6e88000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_RCAN1>,
+ <&cpg_clocks R8A7794_CLK_RCAN>, <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 40/47] ARM: dts: r8a7793: add CAN clocks to device tree
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock
(clkp2) and external clock fed on CAN_CLK pin. Describe those clocks in
the device tree along with the USB_EXTAL clock from which clkp2 is
derived.
Based on work by Sergei Shtylyov for the r8a7791 SoC.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7793.dtsi | 27 +++++++++++++++++++++++----
1 file changed, 23 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 90925c5d14d0..fc108e285bfa 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -865,6 +865,22 @@
clock-output-names = "audio_clk_c";
};
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* External SCIF clock */
scif_clk: scif {
compatible = "fixed-clock";
@@ -879,7 +895,7 @@
compatible = "renesas,r8a7793-cpg-clocks",
"renesas,rcar-gen2-cpg-clocks";
reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>;
+ clocks = <&extal_clk &usb_extal_clk>;
#clock-cells = <1>;
clock-output-names = "main", "pll0", "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "z",
@@ -1120,6 +1136,7 @@
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
<&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&p_clk>, <&p_clk>,
<&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>,
<&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
<&hp_clk>, <&hp_clk>;
@@ -1129,7 +1146,8 @@
R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
- R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5
+ R8A7793_CLK_QSPI_MOD R8A7793_CLK_RCAN1
+ R8A7793_CLK_RCAN0 R8A7793_CLK_I2C5
R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4
R8A7793_CLK_I2C3 R8A7793_CLK_I2C2
R8A7793_CLK_I2C1 R8A7793_CLK_I2C0
@@ -1137,8 +1155,9 @@
clock-output-names =
"gpio7", "gpio6", "gpio5", "gpio4",
"gpio3", "gpio2", "gpio1", "gpio0",
- "qspi_mod", "i2c5", "i2c6", "i2c4",
- "i2c3", "i2c2", "i2c1", "i2c0";
+ "rcan1", "rcan0", "qspi_mod", "i2c5",
+ "i2c6", "i2c4", "i2c3", "i2c2", "i2c1",
+ "i2c0";
};
mstp10_clks: mstp10_clks@e6150998 {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 40/47] ARM: dts: r8a7793: add CAN clocks to device tree
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock
(clkp2) and external clock fed on CAN_CLK pin. Describe those clocks in
the device tree along with the USB_EXTAL clock from which clkp2 is
derived.
Based on work by Sergei Shtylyov for the r8a7791 SoC.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7793.dtsi | 27 +++++++++++++++++++++++----
1 file changed, 23 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 90925c5d14d0..fc108e285bfa 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -865,6 +865,22 @@
clock-output-names = "audio_clk_c";
};
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* External SCIF clock */
scif_clk: scif {
compatible = "fixed-clock";
@@ -879,7 +895,7 @@
compatible = "renesas,r8a7793-cpg-clocks",
"renesas,rcar-gen2-cpg-clocks";
reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>;
+ clocks = <&extal_clk &usb_extal_clk>;
#clock-cells = <1>;
clock-output-names = "main", "pll0", "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "z",
@@ -1120,6 +1136,7 @@
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
<&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&p_clk>, <&p_clk>,
<&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>,
<&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
<&hp_clk>, <&hp_clk>;
@@ -1129,7 +1146,8 @@
R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
- R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5
+ R8A7793_CLK_QSPI_MOD R8A7793_CLK_RCAN1
+ R8A7793_CLK_RCAN0 R8A7793_CLK_I2C5
R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4
R8A7793_CLK_I2C3 R8A7793_CLK_I2C2
R8A7793_CLK_I2C1 R8A7793_CLK_I2C0
@@ -1137,8 +1155,9 @@
clock-output-names =
"gpio7", "gpio6", "gpio5", "gpio4",
"gpio3", "gpio2", "gpio1", "gpio0",
- "qspi_mod", "i2c5", "i2c6", "i2c4",
- "i2c3", "i2c2", "i2c1", "i2c0";
+ "rcan1", "rcan0", "qspi_mod", "i2c5",
+ "i2c6", "i2c4", "i2c3", "i2c2", "i2c1",
+ "i2c0";
};
mstp10_clks: mstp10_clks at e6150998 {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 41/47] ARM: dts: r8a7793: add CAN nodes to device tree
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Add CAN nodes to r8a7793 device tree.
Based on work by Sergei Shtylyov for the r8a7791 SoC.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index fc108e285bfa..e34d7f48eff3 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -828,6 +828,28 @@
};
};
+ can0: can@e6e80000 {
+ compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can";
+ reg = <0 0xe6e80000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_RCAN0>,
+ <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ can1: can@e6e88000 {
+ compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can";
+ reg = <0 0xe6e88000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_RCAN1>,
+ <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 41/47] ARM: dts: r8a7793: add CAN nodes to device tree
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
Add CAN nodes to r8a7793 device tree.
Based on work by Sergei Shtylyov for the r8a7791 SoC.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index fc108e285bfa..e34d7f48eff3 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -828,6 +828,28 @@
};
};
+ can0: can at e6e80000 {
+ compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can";
+ reg = <0 0xe6e80000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_RCAN0>,
+ <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ can1: can at e6e88000 {
+ compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can";
+ reg = <0 0xe6e88000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_RCAN1>,
+ <&cpg_clocks R8A7793_CLK_RCAN>, <&can_clk>;
+ clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 42/47] ARM: dts: r8a7794: add IIC clocks
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Add IIC clocks to r8a7794 device tree.
Based on similar work for the r8a7790 by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7794.dtsi | 9 ++++++---
include/dt-bindings/clock/r8a7794-clock.h | 2 ++
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index e2a4b6bd16a0..78e0b8186e4a 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1150,16 +1150,19 @@
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
- <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
+ <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>,
+ <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7794_CLK_SDHI2 R8A7794_CLK_SDHI1 R8A7794_CLK_SDHI0
- R8A7794_CLK_MMCIF0 R8A7794_CLK_CMT1
+ R8A7794_CLK_MMCIF0 R8A7794_CLK_IIC0
+ R8A7794_CLK_IIC1 R8A7794_CLK_CMT1
R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
>;
clock-output-names =
"sdhi2", "sdhi1", "sdhi0",
- "mmcif0", "cmt1", "usbdmac0", "usbdmac1";
+ "mmcif0", "i2c6", "i2c7",
+ "cmt1", "usbdmac0", "usbdmac1";
};
mstp4_clks: mstp4_clks@e6150140 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index 9703fbdb81c8..4d3ecd626c1f 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -57,6 +57,8 @@
#define R8A7794_CLK_SDHI1 12
#define R8A7794_CLK_SDHI0 14
#define R8A7794_CLK_MMCIF0 15
+#define R8A7794_CLK_IIC0 18
+#define R8A7794_CLK_IIC1 23
#define R8A7794_CLK_CMT1 29
#define R8A7794_CLK_USBDMAC0 30
#define R8A7794_CLK_USBDMAC1 31
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 42/47] ARM: dts: r8a7794: add IIC clocks
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
Add IIC clocks to r8a7794 device tree.
Based on similar work for the r8a7790 by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7794.dtsi | 9 ++++++---
include/dt-bindings/clock/r8a7794-clock.h | 2 ++
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index e2a4b6bd16a0..78e0b8186e4a 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1150,16 +1150,19 @@
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
- <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
+ <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>,
+ <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7794_CLK_SDHI2 R8A7794_CLK_SDHI1 R8A7794_CLK_SDHI0
- R8A7794_CLK_MMCIF0 R8A7794_CLK_CMT1
+ R8A7794_CLK_MMCIF0 R8A7794_CLK_IIC0
+ R8A7794_CLK_IIC1 R8A7794_CLK_CMT1
R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
>;
clock-output-names =
"sdhi2", "sdhi1", "sdhi0",
- "mmcif0", "cmt1", "usbdmac0", "usbdmac1";
+ "mmcif0", "i2c6", "i2c7",
+ "cmt1", "usbdmac0", "usbdmac1";
};
mstp4_clks: mstp4_clks at e6150140 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index 9703fbdb81c8..4d3ecd626c1f 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -57,6 +57,8 @@
#define R8A7794_CLK_SDHI1 12
#define R8A7794_CLK_SDHI0 14
#define R8A7794_CLK_MMCIF0 15
+#define R8A7794_CLK_IIC0 18
+#define R8A7794_CLK_IIC1 23
#define R8A7794_CLK_CMT1 29
#define R8A7794_CLK_USBDMAC0 30
#define R8A7794_CLK_USBDMAC1 31
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 43/47] ARM: dts: r8a7794: Add IIC nodes
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Add IIC nodes to r8a7794 device tree.
Based on similar work for the r8a7793 by Laurent Pinchart.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7794.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 78e0b8186e4a..93a6293fa982 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -26,6 +26,8 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
spi0 = &qspi;
vin0 = &vin0;
vin1 = &vin1;
@@ -647,6 +649,32 @@
status = "disabled";
};
+ i2c6: i2c@e6500000 {
+ compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7794_CLK_IIC0>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@e6510000 {
+ compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x425>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7794_CLK_IIC1>;
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
mmcif0: mmc@ee200000 {
compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7
@ 2016-04-04 1:23 Simon Horman
2016-04-04 1:22 ` [PATCH 01/47] ARM: dts: r8a7790: use fallback jpu compatibility string Simon Horman
` (47 more replies)
0 siblings, 48 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these Renesas ARM based SoC DT updates for v4.7.
The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.7
for you to fetch changes up to 64abfd0a89ae1c7e0edcc6744198842e706c0b52:
ARM: dts: r8a7791: Use USB3.0 fallback compatibility string (2016-03-28 09:03:37 +0900)
----------------------------------------------------------------
Renesas ARM Based SoC DT Updates for v4.7
* Correct interrupt type for ARM TWD in DT of r8a7779 and sh73a0 SoCs
* Add IIC support to DT of r8a7794 SoC
* Add CAN support to DT of r8a7793 and r8a7794 SoCs
* Add SCIF2 support to r8a7790 device tree
* Reference both DMA controllers in MMCIF, SDHI, QSPI HSCIF, SFIFA, SCIFB
and IIC nodes of r8a7790, r8a7791 r8a7793 and r8a7794 SoCs.
* Use CAN, JPU and USB3.0 fallback compatibility string
in DT of r8a7791 and r8a7790 SoCs
----------------------------------------------------------------
Geert Uytterhoeven (4):
ARM: dts: r8a7790: Add SCIF2 clock
ARM: dts: r8a7790: Add SCIF2 device node
ARM: dts: sh73a0: Correct interrupt type for ARM TWD
ARM: dts: r8a7779: Correct interrupt type for ARM TWD
Niklas S?derlund (31):
ARM: dts: r8a7790: Reference both DMA controllers in SCIFA nodes
ARM: dts: r8a7790: Reference both DMA controllers in SCIFB nodes
ARM: dts: r8a7790: Reference both DMA controllers in HSCIF nodes
ARM: dts: r8a7790: Reference both DMA controllers in SCIF nodes
ARM: dts: r8a7790: Reference both DMA controllers in MSIOF nodes
ARM: dts: r8a7790: Reference both DMA controllers in QSPI node
ARM: dts: r8a7790: Reference both DMA controllers in IIC nodes
ARM: dts: r8a7790: Reference both DMA controllers in SDHI nodes
ARM: dts: r8a7790: Reference both DMA controllers in MMCIF nodes
ARM: dts: r8a7791: Reference both DMA controllers in SCIFA nodes
ARM: dts: r8a7791: Reference both DMA controllers in SCIFB nodes
ARM: dts: r8a7791: Reference both DMA controllers in HSCIF nodes
ARM: dts: r8a7791: Reference both DMA controllers in SCIF nodes
ARM: dts: r8a7791: Reference both DMA controllers in MSIOF nodes
ARM: dts: r8a7791: Reference both DMA controllers in QSPI node
ARM: dts: r8a7791: Reference both DMA controllers in IIC nodes
ARM: dts: r8a7791: Reference both DMA controllers in SDHI nodes
ARM: dts: r8a7791: Reference both DMA controllers in MMCIF node
ARM: dts: r8a7793: Reference both DMA controllers in SCIFA nodes
ARM: dts: r8a7793: Reference both DMA controllers in SCIFB nodes
ARM: dts: r8a7793: Reference both DMA controllers in HSCIF nodes
ARM: dts: r8a7793: Reference both DMA controllers in SCIF nodes
ARM: dts: r8a7793: Reference both DMA controllers in QSPI node
ARM: dts: r8a7793: Reference both DMA controllers in IIC nodes
ARM: dts: r8a7794: Reference both DMA controllers in SCIFA nodes
ARM: dts: r8a7794: Reference both DMA controllers in SCIFB nodes
ARM: dts: r8a7794: Reference both DMA controllers in HSCIF nodes
ARM: dts: r8a7794: Reference both DMA controllers in SCIF nodes
ARM: dts: r8a7794: Reference both DMA controllers in QSPI node
ARM: dts: r8a7794: Reference both DMA controllers in SDHI nodes
ARM: dts: r8a7794: Reference both DMA controllers in MMCIF node
Simon Horman (12):
ARM: dts: r8a7790: use fallback jpu compatibility string
ARM: dts: r8a7791: use fallback jpu compatibility string
ARM: dts: r8a7791: use fallback can compatibility string
ARM: dts: r8a7790: use fallback can compatibility string
ARM: dts: r8a7794: add CAN clocks to device tree
ARM: dts: r8a7794: add CAN nodes to device tree
ARM: dts: r8a7793: add CAN clocks to device tree
ARM: dts: r8a7793: add CAN nodes to device tree
ARM: dts: r8a7794: add IIC clocks
ARM: dts: r8a7794: Add IIC nodes
ARM: dts: r8a7790: Use USB3.0 fallback compatibility string
ARM: dts: r8a7791: Use USB3.0 fallback compatibility string
arch/arm/boot/dts/r8a7779.dtsi | 2 +-
arch/arm/boot/dts/r8a7790.dtsi | 154 ++++++++++++++---------
arch/arm/boot/dts/r8a7791.dtsi | 153 ++++++++++++++---------
arch/arm/boot/dts/r8a7793.dtsi | 159 ++++++++++++++++-------
arch/arm/boot/dts/r8a7794.dtsi | 201 ++++++++++++++++++++++--------
arch/arm/boot/dts/sh73a0.dtsi | 2 +-
include/dt-bindings/clock/r8a7790-clock.h | 1 +
include/dt-bindings/clock/r8a7794-clock.h | 5 +
8 files changed, 458 insertions(+), 219 deletions(-)
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 43/47] ARM: dts: r8a7794: Add IIC nodes
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
Add IIC nodes to r8a7794 device tree.
Based on similar work for the r8a7793 by Laurent Pinchart.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7794.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 78e0b8186e4a..93a6293fa982 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -26,6 +26,8 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
spi0 = &qspi;
vin0 = &vin0;
vin1 = &vin1;
@@ -647,6 +649,32 @@
status = "disabled";
};
+ i2c6: i2c at e6500000 {
+ compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7794_CLK_IIC0>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c at e6510000 {
+ compatible = "renesas,iic-r8a7794", "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x425>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7794_CLK_IIC1>;
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
mmcif0: mmc at ee200000 {
compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 44/47] ARM: dts: sh73a0: Correct interrupt type for ARM TWD
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
The ARM TWD interrupt is a private peripheral interrupt (PPI), and per
the ARM GIC documentation, whether the type for PPIs can be set is
IMPLEMENTATION DEFINED.
For SH-Mobile AG5 devices the PPI type cannot be set, and so when we
attempt to set the type for the ARM TWD interrupt it fails. This has
gone unnoticed because it fails silently, and because we cannot
re-configure the type it has had no impact. Nevertheless fix the type
for the TWD interrupt so that it matches the hardware configuration.
Based on patches by Jon Hunter for Tegra20/30 and OMAP4.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index bf825ca4f6f7..3d41fb97689e 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -43,7 +43,7 @@
timer@f0000600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xf0000600 0x20>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
clocks = <&twd_clk>;
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 44/47] ARM: dts: sh73a0: Correct interrupt type for ARM TWD
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
The ARM TWD interrupt is a private peripheral interrupt (PPI), and per
the ARM GIC documentation, whether the type for PPIs can be set is
IMPLEMENTATION DEFINED.
For SH-Mobile AG5 devices the PPI type cannot be set, and so when we
attempt to set the type for the ARM TWD interrupt it fails. This has
gone unnoticed because it fails silently, and because we cannot
re-configure the type it has had no impact. Nevertheless fix the type
for the TWD interrupt so that it matches the hardware configuration.
Based on patches by Jon Hunter for Tegra20/30 and OMAP4.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index bf825ca4f6f7..3d41fb97689e 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -43,7 +43,7 @@
timer at f0000600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xf0000600 0x20>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
clocks = <&twd_clk>;
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 45/47] ARM: dts: r8a7779: Correct interrupt type for ARM TWD
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:22 ` Simon Horman
` (46 subsequent siblings)
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
The ARM TWD interrupt is a private peripheral interrupt (PPI), and per
the ARM GIC documentation, whether the type for PPIs can be set is
IMPLEMENTATION DEFINED.
For R-Car H1 devices the PPI type cannot be set, and so when we attempt
to set the type for the ARM TWD interrupt it fails. This has gone
unnoticed because it fails silently, and because we cannot re-configure
the type it has had no impact. Nevertheless fix the type for the TWD
interrupt so that it matches the hardware configuration.
Based on patches by Jon Hunter for Tegra20/30 and OMAP4.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index a0cc08e6295b..efe16bceed39 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -67,7 +67,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0xf0000600 0x20>;
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
clocks = <&cpg_clocks R8A7779_CLK_ZS>;
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 45/47] ARM: dts: r8a7779: Correct interrupt type for ARM TWD
@ 2016-04-04 1:23 ` Simon Horman
0 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
The ARM TWD interrupt is a private peripheral interrupt (PPI), and per
the ARM GIC documentation, whether the type for PPIs can be set is
IMPLEMENTATION DEFINED.
For R-Car H1 devices the PPI type cannot be set, and so when we attempt
to set the type for the ARM TWD interrupt it fails. This has gone
unnoticed because it fails silently, and because we cannot re-configure
the type it has had no impact. Nevertheless fix the type for the TWD
interrupt so that it matches the hardware configuration.
Based on patches by Jon Hunter for Tegra20/30 and OMAP4.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index a0cc08e6295b..efe16bceed39 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -67,7 +67,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0xf0000600 0x20>;
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
clocks = <&cpg_clocks R8A7779_CLK_ZS>;
};
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 46/47] ARM: dts: r8a7790: Use USB3.0 fallback compatibility string
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (44 preceding siblings ...)
2016-04-04 1:23 ` Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 47/47] ARM: dts: r8a7791: " Simon Horman
2016-04-13 19:48 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Olof Johansson
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
Use recently added fallback compatibility string in r8a7790 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7790.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index b71b3e20b6e4..bdb83bf67199 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1571,7 +1571,7 @@
};
xhci: usb at ee000000 {
- compatible = "renesas,xhci-r8a7790";
+ compatible = "renesas,xhci-r8a7790", "renesas,rcar-gen2-xhci";
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 47/47] ARM: dts: r8a7791: Use USB3.0 fallback compatibility string
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (45 preceding siblings ...)
2016-04-04 1:23 ` [PATCH 46/47] ARM: dts: r8a7790: Use USB3.0 fallback compatibility string Simon Horman
@ 2016-04-04 1:23 ` Simon Horman
2016-04-13 19:48 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Olof Johansson
47 siblings, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-04 1:23 UTC (permalink / raw)
To: linux-arm-kernel
Use recently added fallback compatibility string in r8a7791 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7791.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 5f89b5863d94..4682701fbbed 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1578,7 +1578,7 @@
};
xhci: usb at ee000000 {
- compatible = "renesas,xhci-r8a7791";
+ compatible = "renesas,xhci-r8a7791", "renesas,rcar-gen2-xhci";
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
--
2.1.4
^ permalink raw reply related [flat|nested] 90+ messages in thread
* [PATCH 31/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFA nodes
2016-04-04 1:23 ` Simon Horman
(?)
@ 2016-04-13 19:48 ` Olof Johansson
2016-04-13 19:55 ` Geert Uytterhoeven
-1 siblings, 1 reply; 90+ messages in thread
From: Olof Johansson @ 2016-04-13 19:48 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Commenting on this random patch in the series, but I'm guessing the
same applies for others.
First, I think it's somewhat silly to split this up into 31 patches
instead of just doing one. But it's not bad enough that it really
matters.
My bigger concern is:
On Sun, Apr 3, 2016 at 6:23 PM, Simon Horman <horms+renesas@verge.net.au> wrote:
> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
> index eacb2b291361..4256557ca041 100644
> --- a/arch/arm/boot/dts/r8a7794.dtsi
> +++ b/arch/arm/boot/dts/r8a7794.dtsi
> @@ -296,8 +296,9 @@
> interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
> clock-names = "fck";
> - dmas = <&dmac0 0x21>, <&dmac0 0x22>;
> - dma-names = "tx", "rx";
> + dmas = <&dmac0 0x21>, <&dmac0 0x22>,
> + <&dmac1 0x21>, <&dmac1 0x22>;
> + dma-names = "tx", "rx", "tx", "rx";
> power-domains = <&cpg_clocks>;
> status = "disabled";
> };
The names are no longer unique. So a get_<foo>_by_name() function no
longer can work as expected.
This should be fixed.
-Olof
^ permalink raw reply [flat|nested] 90+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
` (46 preceding siblings ...)
2016-04-04 1:23 ` [PATCH 47/47] ARM: dts: r8a7791: " Simon Horman
@ 2016-04-13 19:48 ` Olof Johansson
47 siblings, 0 replies; 90+ messages in thread
From: Olof Johansson @ 2016-04-13 19:48 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Apr 04, 2016 at 10:23:15AM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these Renesas ARM based SoC DT updates for v4.7.
>
>
> The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
>
> Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.7
>
> for you to fetch changes up to 64abfd0a89ae1c7e0edcc6744198842e706c0b52:
>
> ARM: dts: r8a7791: Use USB3.0 fallback compatibility string (2016-03-28 09:03:37 +0900)
>
> ----------------------------------------------------------------
> Renesas ARM Based SoC DT Updates for v4.7
>
> * Correct interrupt type for ARM TWD in DT of r8a7779 and sh73a0 SoCs
> * Add IIC support to DT of r8a7794 SoC
> * Add CAN support to DT of r8a7793 and r8a7794 SoCs
> * Add SCIF2 support to r8a7790 device tree
> * Reference both DMA controllers in MMCIF, SDHI, QSPI HSCIF, SFIFA, SCIFB
> and IIC nodes of r8a7790, r8a7791 r8a7793 and r8a7794 SoCs.
> * Use CAN, JPU and USB3.0 fallback compatibility string
> in DT of r8a7791 and r8a7790 SoCs
Hi,
I had comments on the DMA controller additions, see reply on the specific
patch.
Branch not merged at this time.
-Olof
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 31/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFA nodes
2016-04-13 19:48 ` Olof Johansson
@ 2016-04-13 19:55 ` Geert Uytterhoeven
2016-04-18 3:40 ` Simon Horman
2016-04-26 13:43 ` Niklas Söderlund
0 siblings, 2 replies; 90+ messages in thread
From: Geert Uytterhoeven @ 2016-04-13 19:55 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof,
On Wed, Apr 13, 2016 at 9:48 PM, Olof Johansson <olof@lixom.net> wrote:
> On Sun, Apr 3, 2016 at 6:23 PM, Simon Horman <horms+renesas@verge.net.au> wrote:
>> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
>> index eacb2b291361..4256557ca041 100644
>> --- a/arch/arm/boot/dts/r8a7794.dtsi
>> +++ b/arch/arm/boot/dts/r8a7794.dtsi
>> @@ -296,8 +296,9 @@
>> interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
>> clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
>> clock-names = "fck";
>> - dmas = <&dmac0 0x21>, <&dmac0 0x22>;
>> - dma-names = "tx", "rx";
>> + dmas = <&dmac0 0x21>, <&dmac0 0x22>,
>> + <&dmac1 0x21>, <&dmac1 0x22>;
>> + dma-names = "tx", "rx", "tx", "rx";
>> power-domains = <&cpg_clocks>;
>> status = "disabled";
>> };
>
> The names are no longer unique. So a get_<foo>_by_name() function no
> longer can work as expected.
That's intentional, and a relic of how dma_request_slave_channel_compat()
works: if e.g. the first "tx" channel can't be gotten (e.g. because
the referenced
DMAC instance ran out of channels), it will try the next one.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 31/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFA nodes
2016-04-13 19:55 ` Geert Uytterhoeven
@ 2016-04-18 3:40 ` Simon Horman
2016-04-19 23:01 ` Simon Horman
2016-04-21 9:43 ` Niklas Söderlund
2016-04-26 13:43 ` Niklas Söderlund
1 sibling, 2 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-18 3:40 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Apr 13, 2016 at 09:55:14PM +0200, Geert Uytterhoeven wrote:
> Hi Olof,
>
> On Wed, Apr 13, 2016 at 9:48 PM, Olof Johansson <olof@lixom.net> wrote:
> > On Sun, Apr 3, 2016 at 6:23 PM, Simon Horman <horms+renesas@verge.net.au> wrote:
> >> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
> >> index eacb2b291361..4256557ca041 100644
> >> --- a/arch/arm/boot/dts/r8a7794.dtsi
> >> +++ b/arch/arm/boot/dts/r8a7794.dtsi
> >> @@ -296,8 +296,9 @@
> >> interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> >> clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
> >> clock-names = "fck";
> >> - dmas = <&dmac0 0x21>, <&dmac0 0x22>;
> >> - dma-names = "tx", "rx";
> >> + dmas = <&dmac0 0x21>, <&dmac0 0x22>,
> >> + <&dmac1 0x21>, <&dmac1 0x22>;
> >> + dma-names = "tx", "rx", "tx", "rx";
> >> power-domains = <&cpg_clocks>;
> >> status = "disabled";
> >> };
> >
> > The names are no longer unique. So a get_<foo>_by_name() function no
> > longer can work as expected.
>
> That's intentional, and a relic of how dma_request_slave_channel_compat()
> works: if e.g. the first "tx" channel can't be gotten (e.g. because
> the referenced
> DMAC instance ran out of channels), it will try the next one.
Hi Olof,
is the above acceptable to you?
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 31/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFA nodes
2016-04-18 3:40 ` Simon Horman
@ 2016-04-19 23:01 ` Simon Horman
2016-04-21 9:43 ` Niklas Söderlund
1 sibling, 0 replies; 90+ messages in thread
From: Simon Horman @ 2016-04-19 23:01 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Apr 18, 2016 at 01:40:59PM +1000, Simon Horman wrote:
> On Wed, Apr 13, 2016 at 09:55:14PM +0200, Geert Uytterhoeven wrote:
> > Hi Olof,
> >
> > On Wed, Apr 13, 2016 at 9:48 PM, Olof Johansson <olof@lixom.net> wrote:
> > > On Sun, Apr 3, 2016 at 6:23 PM, Simon Horman <horms+renesas@verge.net.au> wrote:
> > >> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
> > >> index eacb2b291361..4256557ca041 100644
> > >> --- a/arch/arm/boot/dts/r8a7794.dtsi
> > >> +++ b/arch/arm/boot/dts/r8a7794.dtsi
> > >> @@ -296,8 +296,9 @@
> > >> interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> > >> clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
> > >> clock-names = "fck";
> > >> - dmas = <&dmac0 0x21>, <&dmac0 0x22>;
> > >> - dma-names = "tx", "rx";
> > >> + dmas = <&dmac0 0x21>, <&dmac0 0x22>,
> > >> + <&dmac1 0x21>, <&dmac1 0x22>;
> > >> + dma-names = "tx", "rx", "tx", "rx";
> > >> power-domains = <&cpg_clocks>;
> > >> status = "disabled";
> > >> };
> > >
> > > The names are no longer unique. So a get_<foo>_by_name() function no
> > > longer can work as expected.
> >
> > That's intentional, and a relic of how dma_request_slave_channel_compat()
> > works: if e.g. the first "tx" channel can't be gotten (e.g. because
> > the referenced
> > DMAC instance ran out of channels), it will try the next one.
>
> Hi Olof,
>
> is the above acceptable to you?
In order to allow the other patches in this series, and others queued up
since, to progress independently of a resolution to this question I
have dropped this and all similar patches for now.
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 31/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFA nodes
2016-04-18 3:40 ` Simon Horman
2016-04-19 23:01 ` Simon Horman
@ 2016-04-21 9:43 ` Niklas Söderlund
1 sibling, 0 replies; 90+ messages in thread
From: Niklas Söderlund @ 2016-04-21 9:43 UTC (permalink / raw)
To: linux-arm-kernel
On 2016-04-18 13:40:59 +1000, Simon Horman wrote:
> On Wed, Apr 13, 2016 at 09:55:14PM +0200, Geert Uytterhoeven wrote:
> > Hi Olof,
> >
> > On Wed, Apr 13, 2016 at 9:48 PM, Olof Johansson <olof@lixom.net> wrote:
> > > On Sun, Apr 3, 2016 at 6:23 PM, Simon Horman <horms+renesas@verge.net.au> wrote:
> > >> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
> > >> index eacb2b291361..4256557ca041 100644
> > >> --- a/arch/arm/boot/dts/r8a7794.dtsi
> > >> +++ b/arch/arm/boot/dts/r8a7794.dtsi
> > >> @@ -296,8 +296,9 @@
> > >> interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> > >> clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
> > >> clock-names = "fck";
> > >> - dmas = <&dmac0 0x21>, <&dmac0 0x22>;
> > >> - dma-names = "tx", "rx";
> > >> + dmas = <&dmac0 0x21>, <&dmac0 0x22>,
> > >> + <&dmac1 0x21>, <&dmac1 0x22>;
> > >> + dma-names = "tx", "rx", "tx", "rx";
> > >> power-domains = <&cpg_clocks>;
> > >> status = "disabled";
> > >> };
> > >
> > > The names are no longer unique. So a get_<foo>_by_name() function no
> > > longer can work as expected.
> >
> > That's intentional, and a relic of how dma_request_slave_channel_compat()
> > works: if e.g. the first "tx" channel can't be gotten (e.g. because
> > the referenced
> > DMAC instance ran out of channels), it will try the next one.
>
> Hi Olof,
>
> is the above acceptable to you?
Hi Olof,
ping.
--
Regards,
Niklas S?derlund
^ permalink raw reply [flat|nested] 90+ messages in thread
* Re: [PATCH 31/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFA nodes
2016-04-13 19:55 ` Geert Uytterhoeven
@ 2016-04-26 13:43 ` Niklas Söderlund
2016-04-26 13:43 ` Niklas Söderlund
1 sibling, 0 replies; 90+ messages in thread
From: Niklas Söderlund @ 2016-04-26 13:43 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson
Cc: Simon Horman, linux-renesas-soc, Magnus Damm, linux-arm-kernel,
Geert Uytterhoeven
Hi Arnd and Olof,
It seems Arnd have been dropped from this thread and I would appreciate
your feedback on this. Do you think it is a good idea to reference both
DMA controllers in this fashion to be able to get channels from either
of the two DMA controllers?
Also to both of you if this is a good solution would you like me to
squash the patches per SoC and resend it? Olof pointed out it might be a
bit silly to do this in so many patches.
On 2016-04-13 21:55:14 +0200, Geert Uytterhoeven wrote:
> Hi Olof,
>
> On Wed, Apr 13, 2016 at 9:48 PM, Olof Johansson <olof@lixom.net> wrote:
> > On Sun, Apr 3, 2016 at 6:23 PM, Simon Horman <horms+renesas@verge.net.au> wrote:
> >> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
> >> index eacb2b291361..4256557ca041 100644
> >> --- a/arch/arm/boot/dts/r8a7794.dtsi
> >> +++ b/arch/arm/boot/dts/r8a7794.dtsi
> >> @@ -296,8 +296,9 @@
> >> interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> >> clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
> >> clock-names = "fck";
> >> - dmas = <&dmac0 0x21>, <&dmac0 0x22>;
> >> - dma-names = "tx", "rx";
> >> + dmas = <&dmac0 0x21>, <&dmac0 0x22>,
> >> + <&dmac1 0x21>, <&dmac1 0x22>;
> >> + dma-names = "tx", "rx", "tx", "rx";
> >> power-domains = <&cpg_clocks>;
> >> status = "disabled";
> >> };
> >
> > The names are no longer unique. So a get_<foo>_by_name() function no
> > longer can work as expected.
>
> That's intentional, and a relic of how dma_request_slave_channel_compat()
> works: if e.g. the first "tx" channel can't be gotten (e.g. because
> the referenced
> DMAC instance ran out of channels), it will try the next one.
--
Regards,
Niklas S�derlund
^ permalink raw reply [flat|nested] 90+ messages in thread
* [PATCH 31/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFA nodes
@ 2016-04-26 13:43 ` Niklas Söderlund
0 siblings, 0 replies; 90+ messages in thread
From: Niklas Söderlund @ 2016-04-26 13:43 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd and Olof,
It seems Arnd have been dropped from this thread and I would appreciate
your feedback on this. Do you think it is a good idea to reference both
DMA controllers in this fashion to be able to get channels from either
of the two DMA controllers?
Also to both of you if this is a good solution would you like me to
squash the patches per SoC and resend it? Olof pointed out it might be a
bit silly to do this in so many patches.
On 2016-04-13 21:55:14 +0200, Geert Uytterhoeven wrote:
> Hi Olof,
>
> On Wed, Apr 13, 2016 at 9:48 PM, Olof Johansson <olof@lixom.net> wrote:
> > On Sun, Apr 3, 2016 at 6:23 PM, Simon Horman <horms+renesas@verge.net.au> wrote:
> >> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
> >> index eacb2b291361..4256557ca041 100644
> >> --- a/arch/arm/boot/dts/r8a7794.dtsi
> >> +++ b/arch/arm/boot/dts/r8a7794.dtsi
> >> @@ -296,8 +296,9 @@
> >> interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> >> clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
> >> clock-names = "fck";
> >> - dmas = <&dmac0 0x21>, <&dmac0 0x22>;
> >> - dma-names = "tx", "rx";
> >> + dmas = <&dmac0 0x21>, <&dmac0 0x22>,
> >> + <&dmac1 0x21>, <&dmac1 0x22>;
> >> + dma-names = "tx", "rx", "tx", "rx";
> >> power-domains = <&cpg_clocks>;
> >> status = "disabled";
> >> };
> >
> > The names are no longer unique. So a get_<foo>_by_name() function no
> > longer can work as expected.
>
> That's intentional, and a relic of how dma_request_slave_channel_compat()
> works: if e.g. the first "tx" channel can't be gotten (e.g. because
> the referenced
> DMAC instance ran out of channels), it will try the next one.
--
Regards,
Niklas S?derlund
^ permalink raw reply [flat|nested] 90+ messages in thread
end of thread, other threads:[~2016-04-26 13:43 UTC | newest]
Thread overview: 90+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-04 1:23 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Simon Horman
2016-04-04 1:22 ` [PATCH 01/47] ARM: dts: r8a7790: use fallback jpu compatibility string Simon Horman
2016-04-04 1:22 ` [PATCH 02/47] ARM: dts: r8a7791: " Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 03/47] ARM: dts: r8a7790: Add SCIF2 clock Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 04/47] ARM: dts: r8a7790: Add SCIF2 device node Simon Horman
2016-04-04 1:22 ` [PATCH 05/47] ARM: dts: r8a7791: use fallback can compatibility string Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 06/47] ARM: dts: r8a7790: " Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 07/47] ARM: dts: r8a7790: Reference both DMA controllers in SCIFA nodes Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 08/47] ARM: dts: r8a7790: Reference both DMA controllers in SCIFB nodes Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 09/47] ARM: dts: r8a7790: Reference both DMA controllers in HSCIF nodes Simon Horman
2016-04-04 1:22 ` [PATCH 10/47] ARM: dts: r8a7790: Reference both DMA controllers in SCIF nodes Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 11/47] ARM: dts: r8a7790: Reference both DMA controllers in MSIOF nodes Simon Horman
2016-04-04 1:22 ` [PATCH 12/47] ARM: dts: r8a7790: Reference both DMA controllers in QSPI node Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 13/47] ARM: dts: r8a7790: Reference both DMA controllers in IIC nodes Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 14/47] ARM: dts: r8a7790: Reference both DMA controllers in SDHI nodes Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 15/47] ARM: dts: r8a7790: Reference both DMA controllers in MMCIF nodes Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 16/47] ARM: dts: r8a7791: Reference both DMA controllers in SCIFA nodes Simon Horman
2016-04-04 1:22 ` [PATCH 17/47] ARM: dts: r8a7791: Reference both DMA controllers in SCIFB nodes Simon Horman
2016-04-04 1:22 ` [PATCH 18/47] ARM: dts: r8a7791: Reference both DMA controllers in HSCIF nodes Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 19/47] ARM: dts: r8a7791: Reference both DMA controllers in SCIF nodes Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 20/47] ARM: dts: r8a7791: Reference both DMA controllers in MSIOF nodes Simon Horman
2016-04-04 1:22 ` [PATCH 21/47] ARM: dts: r8a7791: Reference both DMA controllers in QSPI node Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 22/47] ARM: dts: r8a7791: Reference both DMA controllers in IIC nodes Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 23/47] ARM: dts: r8a7791: Reference both DMA controllers in SDHI nodes Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 24/47] ARM: dts: r8a7791: Reference both DMA controllers in MMCIF node Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:22 ` [PATCH 25/47] ARM: dts: r8a7793: Reference both DMA controllers in SCIFA nodes Simon Horman
2016-04-04 1:22 ` [PATCH 26/47] ARM: dts: r8a7793: Reference both DMA controllers in SCIFB nodes Simon Horman
2016-04-04 1:22 ` [PATCH 27/47] ARM: dts: r8a7793: Reference both DMA controllers in HSCIF nodes Simon Horman
2016-04-04 1:22 ` Simon Horman
2016-04-04 1:23 ` [PATCH 28/47] ARM: dts: r8a7793: Reference both DMA controllers in SCIF nodes Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 29/47] ARM: dts: r8a7793: Reference both DMA controllers in QSPI node Simon Horman
2016-04-04 1:23 ` [PATCH 30/47] ARM: dts: r8a7793: Reference both DMA controllers in IIC nodes Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 31/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFA nodes Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-13 19:48 ` Olof Johansson
2016-04-13 19:55 ` Geert Uytterhoeven
2016-04-18 3:40 ` Simon Horman
2016-04-19 23:01 ` Simon Horman
2016-04-21 9:43 ` Niklas Söderlund
2016-04-26 13:43 ` Niklas Söderlund
2016-04-26 13:43 ` Niklas Söderlund
2016-04-04 1:23 ` [PATCH 32/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIFB nodes Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 33/47] ARM: dts: r8a7794: Reference both DMA controllers in HSCIF nodes Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 34/47] ARM: dts: r8a7794: Reference both DMA controllers in SCIF nodes Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 35/47] ARM: dts: r8a7794: Reference both DMA controllers in QSPI node Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 36/47] ARM: dts: r8a7794: Reference both DMA controllers in SDHI nodes Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 37/47] ARM: dts: r8a7794: Reference both DMA controllers in MMCIF node Simon Horman
2016-04-04 1:23 ` [PATCH 38/47] ARM: dts: r8a7794: add CAN clocks to device tree Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 39/47] ARM: dts: r8a7794: add CAN nodes " Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 40/47] ARM: dts: r8a7793: add CAN clocks " Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 41/47] ARM: dts: r8a7793: add CAN nodes " Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 42/47] ARM: dts: r8a7794: add IIC clocks Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 43/47] ARM: dts: r8a7794: Add IIC nodes Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 44/47] ARM: dts: sh73a0: Correct interrupt type for ARM TWD Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 45/47] ARM: dts: r8a7779: " Simon Horman
2016-04-04 1:23 ` Simon Horman
2016-04-04 1:23 ` [PATCH 46/47] ARM: dts: r8a7790: Use USB3.0 fallback compatibility string Simon Horman
2016-04-04 1:23 ` [PATCH 47/47] ARM: dts: r8a7791: " Simon Horman
2016-04-13 19:48 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v4.7 Olof Johansson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.