* dvb-s2 card "TeVii S472" (cx23885)
@ 2016-04-23 12:51 Hendrik Oenings
[not found] ` <CAAZRmGzG72hm_sd9qpYx7Mo28oSxBgRghPRt42OPN-3xnj94uw@mail.gmail.com>
0 siblings, 1 reply; 6+ messages in thread
From: Hendrik Oenings @ 2016-04-23 12:51 UTC (permalink / raw)
To: Mailinglist linux-media
Hi all,
I'm trying to use the dvb-s2 pci-express card "TeVii S472" with the linux kernel.
I haven't found a usable driver until now, but I've seen that the previous cards (S471, S470) are supported by the current linux kernel.
The driver from the manufacturer's site is more than one year old and doesn't compile with current kernels.
I'd be grateful for any information or ideas.
Regards,
Hendrik
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: dvb-s2 card "TeVii S472" (cx23885)
[not found] ` <CAAZRmGyDJJPRgNKD25DL=a1fyYX3rP0-tcbxcP+7AJv5wVz_Uw@mail.gmail.com>
@ 2016-04-25 16:14 ` Hendrik Oenings
2016-04-26 6:03 ` Olli Salonen
0 siblings, 1 reply; 6+ messages in thread
From: Hendrik Oenings @ 2016-04-25 16:14 UTC (permalink / raw)
To: Mailinglist linux-media
Hi Olli,
I've tested the driver, it compiles well and I've installed it on my
system.
But there's a problem: Everytime I try to load the driver (exact: the
module cx23885), modprobe (or insmod) is giving me the following:
# modprobe cx23885
modprobe: ERROR: could not insert 'cx23885': Exec format error
I've also tried to compile it with the current 4.6er kernel, but it
stays the same.
$ uname -r
4.6.0-rc5
I've also tried to recompile the driver, but it didn't help.
Maybe it is important to mention that some patches fail at the
beginning of the build process (pr_fmt, debug).
The installed module seems to be correct file format (my arch is
x86_64):
$ file \
/lib/modules/4.6.0-rc5/kernel/drivers/media/pci/cx23885/cx23885.ko
/lib/modules/4.6.0-rc5/kernel/drivers/media/pci/cx23885/cx23885.ko: ELF
64-bit LSB relocatable, x86-64, version 1 (SYSV),
BuildID[sha1]=07a3f2f2fe383ab691b0022568dcd4d8315dc4b8, not stripped
Regards,
Hendrik
On Mo, 25 Apr 2016 11:56:37 +0300, Olli Salonen <olli.salonen@iki.fi>
wrote:
> Hello Hendrik,
>
> I've created an initial version of the driver.
> https://github.com/trsqr/media_tree/commit/b59f25b18bbe84e009618eefeaf646f5939bdd53
>
> To build, do the following:
>
> git clone git://linuxtv.org/media_build.git
> git clone --depth=1 https://github.com/trsqr/media_tree.git -b
> s472 ./media cd media_build
> make dir DIR=../media
> make distclean
> make
>
> To install after a successful build:
>
> sudo make install
>
> Download also the following firmware and place it in /lib/firmware:
> http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/3.B/
>
> The thing is, I had to guess the following parameters in
> drivers/media/pci/cx23885/cx23885-dvb.c file:
>
> +static const struct m88ds3103_config tevii_s472_m88ds3103_config = {
> + .i2c_addr = 0x68,
> + .clock = 27000000,
> + .i2c_wr_max = 33,
> + .clock_out = 0,
> + .ts_mode = M88DS3103_TS_PARALLEL,
> + .ts_clk = 16000,
> + .ts_clk_pol = 0,
> + .lnb_en_pol = 0,
> + .lnb_hv_pol = 1,
> + .agc = 0x99,
> +};
>
> If the driver does not work (it loads and appears to tune, but does
> not find channels), try altering ts_clk_pol, lnb_en_pol and
> lnb_hv_pol. The possible values are 1 and 0 so there should not be
> that many iterations needed.. Current values are based on best guess.
>
> Cheers,
> -olli
>
>
>
> On 24 April 2016 at 19:00, Hendrik Oenings <debian@oenings.de> wrote:
> > Hi Olli,
> >
> > I'm glad that there is someone trying to help me and of course I'm
> > able to test a driver.
> >
> > Because of the attached photos, I think it is better not to send
> > this mail to the mailing list.
> >
> > cx23885, m88ds3103 and m88ts2022 are the values I also think they're
> > correct. cx23885 is also mentioned by lspci, the other values I've
> > also seen often while searching for a solution.
> >
> > Here is also the full output of lspci concerning the tv card which
> > is probably helpful.
> > # lspci -vv
> > [...]
> > 03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
> > PCI Video and Audio Decoder (rev 04) Subsystem: Device d472:9022
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-
> > FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
> > <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A
> > routed to IRQ 19 Region 0: Memory at f7c00000 (64-bit,
> > non-prefetchable) [size=2M] Capabilities: [40] Express (v1)
> > Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0,
> > Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE-
> > FLReset- DevCtl: Report errors: Correctable- Non-Fatal-
> > Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> > MaxPayload 128 bytes, MaxReadReq 512 bytes
> > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> > AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1,
> > ASPM L0s L1, Exit Latency L0s <2us, L1 <4us ClockPM- Surprise-
> > LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64
> > bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt-
> > AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
> > SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [80] Power
> > Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> > PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable-
> > DSel=0 DScale=0 PME- Capabilities: [90] Vital Product Data
> > Product Name: "
> > End
> > Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
> > Address: 0000000000000000 Data: 0000
> > Capabilities: [100 v1] Advanced Error Reporting
> > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP-
> > SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
> > UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO-
> > CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> > Capabilities: [200 v1] Virtual Channel Caps: LPEVC=0
> > RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32+ WRR64+ WRR128-
> > Ctrl: ArbSelect=WRR64 Status: InProgress-
> > Port Arbitration Table [240] <?>
> > VC0: Caps: PATOffset=00 MaxTimeSlots=1
> > RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
> > WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed
> > TC/VC=01 Status: NegoPending- InProgress-
> > Kernel driver in use: cx23885
> > Kernel modules: cx23885
> > [...]
> >
> > Regards,
> > Hendrik
> >
> > On Sun, 24 Apr 2016 08:34:14 +0300
> > Olli Salonen <olli.salonen@iki.fi> wrote:
> >> Hi Hendrik,
> >>
> >> Can you take a high resolution picture of the device? I can build
> >> you a test driver if you're able to try it out for me?
> >>
> >> I believe it's CX23885, M88DS3103 and M88TS2022, but it could be
> >> good if you can check.
> >>
> >> Cheers,
> >> -olli
> >>
> >> On 23 April 2016 at 15:51, Hendrik Oenings <debian@oenings.de>
> >> wrote:
> >> > Hi all,
> >> >
> >> > I'm trying to use the dvb-s2 pci-express card "TeVii S472" with
> >> > the linux kernel. I haven't found a usable driver until now, but
> >> > I've seen that the previous cards (S471, S470) are supported by
> >> > the current linux kernel. The driver from the manufacturer's
> >> > site is more than one year old and doesn't compile with current
> >> > kernels.
> >> >
> >> > I'd be grateful for any information or ideas.
> >> >
> >> > Regards,
> >> > Hendrik
> >> > --
> >> > To unsubscribe from this list: send the line "unsubscribe
> >> > linux-media" in the body of a message to
> >> > majordomo@vger.kernel.org More majordomo info at
> >> > http://vger.kernel.org/majordomo-info.html
> >
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: dvb-s2 card "TeVii S472" (cx23885)
2016-04-25 16:14 ` Hendrik Oenings
@ 2016-04-26 6:03 ` Olli Salonen
2016-04-27 19:39 ` Hendrik Oenings
0 siblings, 1 reply; 6+ messages in thread
From: Olli Salonen @ 2016-04-26 6:03 UTC (permalink / raw)
To: Hendrik Oenings, Hans Verkuil; +Cc: Mailinglist linux-media
Hi Hendrik, Hans,
My media_tree Hendrik is pulling from Github is just a rather recent
copy of the media_tree master branch on git.linuxtv.org (it's missing
like the last 10 patches that have been added within the last 24
hours) with 2 simple patches on top that should not break anything.
Also, the media_build is recent, since you just cloned it.
Hans, do you know if there are any known issues with the current
media_build/media_tree on certain kernels?
Thanks.
Cheers,
-olli
On 25 April 2016 at 19:14, Hendrik Oenings <debian@oenings.de> wrote:
> Hi Olli,
>
> I've tested the driver, it compiles well and I've installed it on my
> system.
> But there's a problem: Everytime I try to load the driver (exact: the
> module cx23885), modprobe (or insmod) is giving me the following:
> # modprobe cx23885
> modprobe: ERROR: could not insert 'cx23885': Exec format error
>
> I've also tried to compile it with the current 4.6er kernel, but it
> stays the same.
> $ uname -r
> 4.6.0-rc5
>
> I've also tried to recompile the driver, but it didn't help.
>
> Maybe it is important to mention that some patches fail at the
> beginning of the build process (pr_fmt, debug).
>
> The installed module seems to be correct file format (my arch is
> x86_64):
> $ file \
> /lib/modules/4.6.0-rc5/kernel/drivers/media/pci/cx23885/cx23885.ko
>
> /lib/modules/4.6.0-rc5/kernel/drivers/media/pci/cx23885/cx23885.ko: ELF
> 64-bit LSB relocatable, x86-64, version 1 (SYSV),
> BuildID[sha1]=07a3f2f2fe383ab691b0022568dcd4d8315dc4b8, not stripped
>
> Regards,
> Hendrik
>
> On Mo, 25 Apr 2016 11:56:37 +0300, Olli Salonen <olli.salonen@iki.fi>
> wrote:
>
>> Hello Hendrik,
>>
>> I've created an initial version of the driver.
>> https://github.com/trsqr/media_tree/commit/b59f25b18bbe84e009618eefeaf646f5939bdd53
>>
>> To build, do the following:
>>
>> git clone git://linuxtv.org/media_build.git
>> git clone --depth=1 https://github.com/trsqr/media_tree.git -b
>> s472 ./media cd media_build
>> make dir DIR=../media
>> make distclean
>> make
>>
>> To install after a successful build:
>>
>> sudo make install
>>
>> Download also the following firmware and place it in /lib/firmware:
>> http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/3.B/
>>
>> The thing is, I had to guess the following parameters in
>> drivers/media/pci/cx23885/cx23885-dvb.c file:
>>
>> +static const struct m88ds3103_config tevii_s472_m88ds3103_config = {
>> + .i2c_addr = 0x68,
>> + .clock = 27000000,
>> + .i2c_wr_max = 33,
>> + .clock_out = 0,
>> + .ts_mode = M88DS3103_TS_PARALLEL,
>> + .ts_clk = 16000,
>> + .ts_clk_pol = 0,
>> + .lnb_en_pol = 0,
>> + .lnb_hv_pol = 1,
>> + .agc = 0x99,
>> +};
>>
>> If the driver does not work (it loads and appears to tune, but does
>> not find channels), try altering ts_clk_pol, lnb_en_pol and
>> lnb_hv_pol. The possible values are 1 and 0 so there should not be
>> that many iterations needed.. Current values are based on best guess.
>>
>> Cheers,
>> -olli
>>
>>
>>
>> On 24 April 2016 at 19:00, Hendrik Oenings <debian@oenings.de> wrote:
>> > Hi Olli,
>> >
>> > I'm glad that there is someone trying to help me and of course I'm
>> > able to test a driver.
>> >
>> > Because of the attached photos, I think it is better not to send
>> > this mail to the mailing list.
>> >
>> > cx23885, m88ds3103 and m88ts2022 are the values I also think they're
>> > correct. cx23885 is also mentioned by lspci, the other values I've
>> > also seen often while searching for a solution.
>> >
>> > Here is also the full output of lspci concerning the tv card which
>> > is probably helpful.
>> > # lspci -vv
>> > [...]
>> > 03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885
>> > PCI Video and Audio Decoder (rev 04) Subsystem: Device d472:9022
>> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> > ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF-
>> > FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
>> > <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A
>> > routed to IRQ 19 Region 0: Memory at f7c00000 (64-bit,
>> > non-prefetchable) [size=2M] Capabilities: [40] Express (v1)
>> > Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0,
>> > Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE-
>> > FLReset- DevCtl: Report errors: Correctable- Non-Fatal-
>> > Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>> > MaxPayload 128 bytes, MaxReadReq 512 bytes
>> > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
>> > AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1,
>> > ASPM L0s L1, Exit Latency L0s <2us, L1 <4us ClockPM- Surprise-
>> > LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64
>> > bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt-
>> > AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
>> > SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [80] Power
>> > Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
>> > PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable-
>> > DSel=0 DScale=0 PME- Capabilities: [90] Vital Product Data
>> > Product Name: "
>> > End
>> > Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
>> > Address: 0000000000000000 Data: 0000
>> > Capabilities: [100 v1] Advanced Error Reporting
>> > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
>> > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP-
>> > SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
>> > UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO-
>> > CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>> > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>> > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>> > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>> > Capabilities: [200 v1] Virtual Channel Caps: LPEVC=0
>> > RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32+ WRR64+ WRR128-
>> > Ctrl: ArbSelect=WRR64 Status: InProgress-
>> > Port Arbitration Table [240] <?>
>> > VC0: Caps: PATOffset=00 MaxTimeSlots=1
>> > RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
>> > WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed
>> > TC/VC=01 Status: NegoPending- InProgress-
>> > Kernel driver in use: cx23885
>> > Kernel modules: cx23885
>> > [...]
>> >
>> > Regards,
>> > Hendrik
>> >
>> > On Sun, 24 Apr 2016 08:34:14 +0300
>> > Olli Salonen <olli.salonen@iki.fi> wrote:
>> >> Hi Hendrik,
>> >>
>> >> Can you take a high resolution picture of the device? I can build
>> >> you a test driver if you're able to try it out for me?
>> >>
>> >> I believe it's CX23885, M88DS3103 and M88TS2022, but it could be
>> >> good if you can check.
>> >>
>> >> Cheers,
>> >> -olli
>> >>
>> >> On 23 April 2016 at 15:51, Hendrik Oenings <debian@oenings.de>
>> >> wrote:
>> >> > Hi all,
>> >> >
>> >> > I'm trying to use the dvb-s2 pci-express card "TeVii S472" with
>> >> > the linux kernel. I haven't found a usable driver until now, but
>> >> > I've seen that the previous cards (S471, S470) are supported by
>> >> > the current linux kernel. The driver from the manufacturer's
>> >> > site is more than one year old and doesn't compile with current
>> >> > kernels.
>> >> >
>> >> > I'd be grateful for any information or ideas.
>> >> >
>> >> > Regards,
>> >> > Hendrik
>> >> > --
>> >> > To unsubscribe from this list: send the line "unsubscribe
>> >> > linux-media" in the body of a message to
>> >> > majordomo@vger.kernel.org More majordomo info at
>> >> > http://vger.kernel.org/majordomo-info.html
>> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: dvb-s2 card "TeVii S472" (cx23885)
2016-04-26 6:03 ` Olli Salonen
@ 2016-04-27 19:39 ` Hendrik Oenings
2016-04-28 8:27 ` Olli Salonen
0 siblings, 1 reply; 6+ messages in thread
From: Hendrik Oenings @ 2016-04-27 19:39 UTC (permalink / raw)
To: Olli Salonen; +Cc: Mailinglist linux-media
Hi together,
I tried to recompile with the newest media_tree, so I just copied your
modifications to the new media_tree. (I also refetched the media_build.)
It wasn't very helpful, but I've seen that there is a kernel
error message (which was there before too, but I hadn't seen it because
I worked on X).
$ su -c "modprobe cx23885"
modprobe: ERROR: could not insert 'cx23885': Exec format error
$ dmesg
...
[XXXXXX.XXXXXX] frame_vector: exports duplicate symbol
frame_vector_create (owned by kernel)
I've looked up the reason for the re-export and I have seen that
frame_vector was built as an module, but is compiled into the kernel.
Changing this in the ./media/v4l/.config from m to y worked, so I can
now load the module.
The kernel message is gone away, but there is another problem now,
dmesg says and w_scan doesn't work either:
[XXX] m88ds3103 7-0068: found a 'Montage Technology M88DS3103' in cold
state
[XXX] m88ds3103 7-0068: downloading firmware from file
'dvb-demod-m88ds3103.fw'
[XXX] m88ds3103 7-0068: firmware did not run
I've copied the firmware as suggested to /lib/firmware.
Regards,
Hendrik
Am Tue, 26 Apr 2016 09:03:24 +0300
schrieb Olli Salonen <olli.salonen@iki.fi>:
> Hi Hendrik, Hans,
>
> My media_tree Hendrik is pulling from Github is just a rather recent
> copy of the media_tree master branch on git.linuxtv.org (it's missing
> like the last 10 patches that have been added within the last 24
> hours) with 2 simple patches on top that should not break anything.
>
> Also, the media_build is recent, since you just cloned it.
>
> Hans, do you know if there are any known issues with the current
> media_build/media_tree on certain kernels?
>
> Thanks.
>
> Cheers,
> -olli
>
> On 25 April 2016 at 19:14, Hendrik Oenings <debian@oenings.de> wrote:
> > Hi Olli,
> >
> > I've tested the driver, it compiles well and I've installed it on my
> > system.
> > But there's a problem: Everytime I try to load the driver (exact:
> > the module cx23885), modprobe (or insmod) is giving me the
> > following: # modprobe cx23885
> > modprobe: ERROR: could not insert 'cx23885': Exec format error
> >
> > I've also tried to compile it with the current 4.6er kernel, but it
> > stays the same.
> > $ uname -r
> > 4.6.0-rc5
> >
> > I've also tried to recompile the driver, but it didn't help.
> >
> > Maybe it is important to mention that some patches fail at the
> > beginning of the build process (pr_fmt, debug).
> >
> > The installed module seems to be correct file format (my arch is
> > x86_64):
> > $ file \
> > /lib/modules/4.6.0-rc5/kernel/drivers/media/pci/cx23885/cx23885.ko
> >
> > /lib/modules/4.6.0-rc5/kernel/drivers/media/pci/cx23885/cx23885.ko:
> > ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV),
> > BuildID[sha1]=07a3f2f2fe383ab691b0022568dcd4d8315dc4b8, not stripped
> >
> > Regards,
> > Hendrik
> >
> > On Mo, 25 Apr 2016 11:56:37 +0300, Olli Salonen
> > <olli.salonen@iki.fi> wrote:
> >
> >> Hello Hendrik,
> >>
> >> I've created an initial version of the driver.
> >> https://github.com/trsqr/media_tree/commit/b59f25b18bbe84e009618eefeaf646f5939bdd53
> >>
> >> To build, do the following:
> >>
> >> git clone git://linuxtv.org/media_build.git
> >> git clone --depth=1 https://github.com/trsqr/media_tree.git -b
> >> s472 ./media cd media_build
> >> make dir DIR=../media
> >> make distclean
> >> make
> >>
> >> To install after a successful build:
> >>
> >> sudo make install
> >>
> >> Download also the following firmware and place it in /lib/firmware:
> >> http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/3.B/
> >>
> >> The thing is, I had to guess the following parameters in
> >> drivers/media/pci/cx23885/cx23885-dvb.c file:
> >>
> >> +static const struct m88ds3103_config tevii_s472_m88ds3103_config
> >> = {
> >> + .i2c_addr = 0x68,
> >> + .clock = 27000000,
> >> + .i2c_wr_max = 33,
> >> + .clock_out = 0,
> >> + .ts_mode = M88DS3103_TS_PARALLEL,
> >> + .ts_clk = 16000,
> >> + .ts_clk_pol = 0,
> >> + .lnb_en_pol = 0,
> >> + .lnb_hv_pol = 1,
> >> + .agc = 0x99,
> >> +};
> >>
> >> If the driver does not work (it loads and appears to tune, but does
> >> not find channels), try altering ts_clk_pol, lnb_en_pol and
> >> lnb_hv_pol. The possible values are 1 and 0 so there should not be
> >> that many iterations needed.. Current values are based on best
> >> guess.
> >>
> >> Cheers,
> >> -olli
> >>
> >>
> >>
> >> On 24 April 2016 at 19:00, Hendrik Oenings <debian@oenings.de>
> >> wrote:
> >> > Hi Olli,
> >> >
> >> > I'm glad that there is someone trying to help me and of course
> >> > I'm able to test a driver.
> >> >
> >> > Because of the attached photos, I think it is better not to send
> >> > this mail to the mailing list.
> >> >
> >> > cx23885, m88ds3103 and m88ts2022 are the values I also think
> >> > they're correct. cx23885 is also mentioned by lspci, the other
> >> > values I've also seen often while searching for a solution.
> >> >
> >> > Here is also the full output of lspci concerning the tv card
> >> > which is probably helpful.
> >> > # lspci -vv
> >> > [...]
> >> > 03:00.0 Multimedia video controller: Conexant Systems, Inc.
> >> > CX23885 PCI Video and Audio Decoder (rev 04) Subsystem: Device
> >> > d472:9022 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
> >> > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+
> >> > 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> >> > <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64
> >> > bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at
> >> > f7c00000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40]
> >> > Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes,
> >> > PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn-
> >> > AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors:
> >> > Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag-
> >> > PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512
> >> > bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> >> > AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1,
> >> > ASPM L0s L1, Exit Latency L0s <2us, L1 <4us ClockPM- Surprise-
> >> > LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64
> >> > bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt-
> >> > AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
> >> > SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [80] Power
> >> > Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> >> > PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable-
> >> > DSel=0 DScale=0 PME- Capabilities: [90] Vital Product Data
> >> > Product Name: "
> >> > End
> >> > Capabilities: [a0] MSI: Enable- Count=1/1 Maskable-
> >> > 64bit+ Address: 0000000000000000 Data: 0000
> >> > Capabilities: [100 v1] Advanced Error Reporting
> >> > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> >> > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk:
> >> > DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> >> > MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP-
> >> > FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC-
> >> > UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover-
> >> > Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover-
> >> > Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap-
> >> > CGenEn- ChkCap- ChkEn- Capabilities: [200 v1] Virtual Channel
> >> > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+
> >> > WRR32+ WRR64+ WRR128- Ctrl: ArbSelect=WRR64 Status: InProgress-
> >> > Port Arbitration Table [240] <?>
> >> > VC0: Caps: PATOffset=00 MaxTimeSlots=1
> >> > RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
> >> > WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed
> >> > TC/VC=01 Status: NegoPending- InProgress-
> >> > Kernel driver in use: cx23885
> >> > Kernel modules: cx23885
> >> > [...]
> >> >
> >> > Regards,
> >> > Hendrik
> >> >
> >> > On Sun, 24 Apr 2016 08:34:14 +0300
> >> > Olli Salonen <olli.salonen@iki.fi> wrote:
> >> >> Hi Hendrik,
> >> >>
> >> >> Can you take a high resolution picture of the device? I can
> >> >> build you a test driver if you're able to try it out for me?
> >> >>
> >> >> I believe it's CX23885, M88DS3103 and M88TS2022, but it could be
> >> >> good if you can check.
> >> >>
> >> >> Cheers,
> >> >> -olli
> >> >>
> >> >> On 23 April 2016 at 15:51, Hendrik Oenings <debian@oenings.de>
> >> >> wrote:
> >> >> > Hi all,
> >> >> >
> >> >> > I'm trying to use the dvb-s2 pci-express card "TeVii S472"
> >> >> > with the linux kernel. I haven't found a usable driver until
> >> >> > now, but I've seen that the previous cards (S471, S470) are
> >> >> > supported by the current linux kernel. The driver from the
> >> >> > manufacturer's site is more than one year old and doesn't
> >> >> > compile with current kernels.
> >> >> >
> >> >> > I'd be grateful for any information or ideas.
> >> >> >
> >> >> > Regards,
> >> >> > Hendrik
> >> >> > --
> >> >> > To unsubscribe from this list: send the line "unsubscribe
> >> >> > linux-media" in the body of a message to
> >> >> > majordomo@vger.kernel.org More majordomo info at
> >> >> > http://vger.kernel.org/majordomo-info.html
> >> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-media" in the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-media" in the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: dvb-s2 card "TeVii S472" (cx23885)
2016-04-27 19:39 ` Hendrik Oenings
@ 2016-04-28 8:27 ` Olli Salonen
2016-04-28 14:50 ` Hendrik Oenings
0 siblings, 1 reply; 6+ messages in thread
From: Olli Salonen @ 2016-04-28 8:27 UTC (permalink / raw)
To: Hendrik Oenings; +Cc: Mailinglist linux-media
Hi Hendrik,
Can you check that the chip on the board is indeed M88DS3103? I could
not read the text on the chip on the photo you sent earlier.
Furthermore, could you load the m88ds3103 driver with debugging
enabled before loading the cx23885 module:
modprobe m88ds3103 dyndbg==pmf
Then send the dmesg printout and maybe we can get some hints why the
firmware is not running.
Cheers,
-olli
On 27 April 2016 at 22:39, Hendrik Oenings <debian@oenings.de> wrote:
> Hi together,
>
> I tried to recompile with the newest media_tree, so I just copied your
> modifications to the new media_tree. (I also refetched the media_build.)
> It wasn't very helpful, but I've seen that there is a kernel
> error message (which was there before too, but I hadn't seen it because
> I worked on X).
>
> $ su -c "modprobe cx23885"
> modprobe: ERROR: could not insert 'cx23885': Exec format error
> $ dmesg
> ...
> [XXXXXX.XXXXXX] frame_vector: exports duplicate symbol
> frame_vector_create (owned by kernel)
>
> I've looked up the reason for the re-export and I have seen that
> frame_vector was built as an module, but is compiled into the kernel.
>
> Changing this in the ./media/v4l/.config from m to y worked, so I can
> now load the module.
>
> The kernel message is gone away, but there is another problem now,
> dmesg says and w_scan doesn't work either:
>
> [XXX] m88ds3103 7-0068: found a 'Montage Technology M88DS3103' in cold
> state
>
> [XXX] m88ds3103 7-0068: downloading firmware from file
> 'dvb-demod-m88ds3103.fw'
>
> [XXX] m88ds3103 7-0068: firmware did not run
>
> I've copied the firmware as suggested to /lib/firmware.
>
> Regards,
> Hendrik
>
> Am Tue, 26 Apr 2016 09:03:24 +0300
> schrieb Olli Salonen <olli.salonen@iki.fi>:
>
>> Hi Hendrik, Hans,
>>
>> My media_tree Hendrik is pulling from Github is just a rather recent
>> copy of the media_tree master branch on git.linuxtv.org (it's missing
>> like the last 10 patches that have been added within the last 24
>> hours) with 2 simple patches on top that should not break anything.
>>
>> Also, the media_build is recent, since you just cloned it.
>>
>> Hans, do you know if there are any known issues with the current
>> media_build/media_tree on certain kernels?
>>
>> Thanks.
>>
>> Cheers,
>> -olli
>>
>> On 25 April 2016 at 19:14, Hendrik Oenings <debian@oenings.de> wrote:
>> > Hi Olli,
>> >
>> > I've tested the driver, it compiles well and I've installed it on my
>> > system.
>> > But there's a problem: Everytime I try to load the driver (exact:
>> > the module cx23885), modprobe (or insmod) is giving me the
>> > following: # modprobe cx23885
>> > modprobe: ERROR: could not insert 'cx23885': Exec format error
>> >
>> > I've also tried to compile it with the current 4.6er kernel, but it
>> > stays the same.
>> > $ uname -r
>> > 4.6.0-rc5
>> >
>> > I've also tried to recompile the driver, but it didn't help.
>> >
>> > Maybe it is important to mention that some patches fail at the
>> > beginning of the build process (pr_fmt, debug).
>> >
>> > The installed module seems to be correct file format (my arch is
>> > x86_64):
>> > $ file \
>> > /lib/modules/4.6.0-rc5/kernel/drivers/media/pci/cx23885/cx23885.ko
>> >
>> > /lib/modules/4.6.0-rc5/kernel/drivers/media/pci/cx23885/cx23885.ko:
>> > ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV),
>> > BuildID[sha1]=07a3f2f2fe383ab691b0022568dcd4d8315dc4b8, not stripped
>> >
>> > Regards,
>> > Hendrik
>> >
>> > On Mo, 25 Apr 2016 11:56:37 +0300, Olli Salonen
>> > <olli.salonen@iki.fi> wrote:
>> >
>> >> Hello Hendrik,
>> >>
>> >> I've created an initial version of the driver.
>> >> https://github.com/trsqr/media_tree/commit/b59f25b18bbe84e009618eefeaf646f5939bdd53
>> >>
>> >> To build, do the following:
>> >>
>> >> git clone git://linuxtv.org/media_build.git
>> >> git clone --depth=1 https://github.com/trsqr/media_tree.git -b
>> >> s472 ./media cd media_build
>> >> make dir DIR=../media
>> >> make distclean
>> >> make
>> >>
>> >> To install after a successful build:
>> >>
>> >> sudo make install
>> >>
>> >> Download also the following firmware and place it in /lib/firmware:
>> >> http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/3.B/
>> >>
>> >> The thing is, I had to guess the following parameters in
>> >> drivers/media/pci/cx23885/cx23885-dvb.c file:
>> >>
>> >> +static const struct m88ds3103_config tevii_s472_m88ds3103_config
>> >> = {
>> >> + .i2c_addr = 0x68,
>> >> + .clock = 27000000,
>> >> + .i2c_wr_max = 33,
>> >> + .clock_out = 0,
>> >> + .ts_mode = M88DS3103_TS_PARALLEL,
>> >> + .ts_clk = 16000,
>> >> + .ts_clk_pol = 0,
>> >> + .lnb_en_pol = 0,
>> >> + .lnb_hv_pol = 1,
>> >> + .agc = 0x99,
>> >> +};
>> >>
>> >> If the driver does not work (it loads and appears to tune, but does
>> >> not find channels), try altering ts_clk_pol, lnb_en_pol and
>> >> lnb_hv_pol. The possible values are 1 and 0 so there should not be
>> >> that many iterations needed.. Current values are based on best
>> >> guess.
>> >>
>> >> Cheers,
>> >> -olli
>> >>
>> >>
>> >>
>> >> On 24 April 2016 at 19:00, Hendrik Oenings <debian@oenings.de>
>> >> wrote:
>> >> > Hi Olli,
>> >> >
>> >> > I'm glad that there is someone trying to help me and of course
>> >> > I'm able to test a driver.
>> >> >
>> >> > Because of the attached photos, I think it is better not to send
>> >> > this mail to the mailing list.
>> >> >
>> >> > cx23885, m88ds3103 and m88ts2022 are the values I also think
>> >> > they're correct. cx23885 is also mentioned by lspci, the other
>> >> > values I've also seen often while searching for a solution.
>> >> >
>> >> > Here is also the full output of lspci concerning the tv card
>> >> > which is probably helpful.
>> >> > # lspci -vv
>> >> > [...]
>> >> > 03:00.0 Multimedia video controller: Conexant Systems, Inc.
>> >> > CX23885 PCI Video and Audio Decoder (rev 04) Subsystem: Device
>> >> > d472:9022 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
>> >> > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+
>> >> > 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
>> >> > <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64
>> >> > bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at
>> >> > f7c00000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40]
>> >> > Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes,
>> >> > PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn-
>> >> > AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors:
>> >> > Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag-
>> >> > PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512
>> >> > bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
>> >> > AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1,
>> >> > ASPM L0s L1, Exit Latency L0s <2us, L1 <4us ClockPM- Surprise-
>> >> > LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64
>> >> > bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt-
>> >> > AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
>> >> > SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [80] Power
>> >> > Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
>> >> > PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable-
>> >> > DSel=0 DScale=0 PME- Capabilities: [90] Vital Product Data
>> >> > Product Name: "
>> >> > End
>> >> > Capabilities: [a0] MSI: Enable- Count=1/1 Maskable-
>> >> > 64bit+ Address: 0000000000000000 Data: 0000
>> >> > Capabilities: [100 v1] Advanced Error Reporting
>> >> > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
>> >> > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk:
>> >> > DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
>> >> > MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP-
>> >> > FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC-
>> >> > UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover-
>> >> > Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover-
>> >> > Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap-
>> >> > CGenEn- ChkCap- ChkEn- Capabilities: [200 v1] Virtual Channel
>> >> > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+
>> >> > WRR32+ WRR64+ WRR128- Ctrl: ArbSelect=WRR64 Status: InProgress-
>> >> > Port Arbitration Table [240] <?>
>> >> > VC0: Caps: PATOffset=00 MaxTimeSlots=1
>> >> > RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
>> >> > WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed
>> >> > TC/VC=01 Status: NegoPending- InProgress-
>> >> > Kernel driver in use: cx23885
>> >> > Kernel modules: cx23885
>> >> > [...]
>> >> >
>> >> > Regards,
>> >> > Hendrik
>> >> >
>> >> > On Sun, 24 Apr 2016 08:34:14 +0300
>> >> > Olli Salonen <olli.salonen@iki.fi> wrote:
>> >> >> Hi Hendrik,
>> >> >>
>> >> >> Can you take a high resolution picture of the device? I can
>> >> >> build you a test driver if you're able to try it out for me?
>> >> >>
>> >> >> I believe it's CX23885, M88DS3103 and M88TS2022, but it could be
>> >> >> good if you can check.
>> >> >>
>> >> >> Cheers,
>> >> >> -olli
>> >> >>
>> >> >> On 23 April 2016 at 15:51, Hendrik Oenings <debian@oenings.de>
>> >> >> wrote:
>> >> >> > Hi all,
>> >> >> >
>> >> >> > I'm trying to use the dvb-s2 pci-express card "TeVii S472"
>> >> >> > with the linux kernel. I haven't found a usable driver until
>> >> >> > now, but I've seen that the previous cards (S471, S470) are
>> >> >> > supported by the current linux kernel. The driver from the
>> >> >> > manufacturer's site is more than one year old and doesn't
>> >> >> > compile with current kernels.
>> >> >> >
>> >> >> > I'd be grateful for any information or ideas.
>> >> >> >
>> >> >> > Regards,
>> >> >> > Hendrik
>> >> >> > --
>> >> >> > To unsubscribe from this list: send the line "unsubscribe
>> >> >> > linux-media" in the body of a message to
>> >> >> > majordomo@vger.kernel.org More majordomo info at
>> >> >> > http://vger.kernel.org/majordomo-info.html
>> >> >
>> >
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe
>> > linux-media" in the body of a message to majordomo@vger.kernel.org
>> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-media" in the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: dvb-s2 card "TeVii S472" (cx23885)
2016-04-28 8:27 ` Olli Salonen
@ 2016-04-28 14:50 ` Hendrik Oenings
0 siblings, 0 replies; 6+ messages in thread
From: Hendrik Oenings @ 2016-04-28 14:50 UTC (permalink / raw)
To: Olli Salonen; +Cc: Mailinglist linux-media
Hi Olli,
I've checked if the chip is M88DS3103 and it is not DS3103, but
DS3002b. LinuxTV says it's just like DS3000 and I've seen that the
TeVii S471 also uses that demodulator.
I've tried just to use the code used by TeVii S471, but then ds3000 says
something like:
* Invalid probe, probably not a DS3000
and there's not even a /dev/dvb/*-device then.
Maybe the card could be unusable too, because it says that there's a
ds3000 on it...
Nevertheless, I've tried your module option with m88ds3103 and my kernel
output is the following:
$ dmesg
...
[ 137.641212] cx23885 driver version 0.0.4 loaded
[ 137.641428] CORE cx23885[0]: subsystem: d472:9022, board: TeVii S472
[card=56,autodetected]
[ 138.177366] cx23885_dvb_register() allocating
1 frontend(s)
[ 138.177369] cx23885[0]: cx23885 based dvb card
[ 138.177871] m88ds3103:m88ds3103_probe: m88ds3103 7-0068: chip_id=70
[ 138.180730] i2c i2c-7: Added multiplexed i2c bus 9
[ 138.180737] m88ds3103:m88ds3103_get_i2c_adapter: m88ds3103 7-0068:
[ 138.180739] m88ds3103:m88ds3103_get_dvb_frontend: m88ds3103 7-0068:
[ 138.235956] ts2020 9-0060: Montage Technology TS2022 successfully
identified
[ 138.235961] DVB: registering new adapter (cx23885[0])
[ 138.235964] cx23885 0000:03:00.0: DVB: registering adapter 0
frontend 0 (Montage Technology M88DS3103)...
[ 138.236379] cx23885_dev_checkrevision() Hardware revision = 0xa5
[ 138.236384] cx23885[0]/0: found at 0000:03:00.0, rev: 4, irq: 19,
latency: 0, mmio: 0xf7c00000
[ 153.386612] m88ds3103:m88ds3103_init: m88ds3103 7-0068:
[ 153.388582] m88ds3103:m88ds3103_init: m88ds3103 7-0068: firmware=c3
[ 153.398919] m88ds3103:m88ds3103_set_voltage: m88ds3103 7-0068:
fe_sec_voltage=2
[ 153.400034] m88ds3103:m88ds3103_sleep: m88ds3103 7-0068:
[ 153.402477] m88ds3103:m88ds3103_init: m88ds3103 7-0068:
[ 153.404436] m88ds3103:m88ds3103_init: m88ds3103 7-0068: firmware=c3
[ 153.414775] m88ds3103:m88ds3103_set_tone: m88ds3103 7-0068:
fe_sec_tone_mode=1
[ 153.415892] m88ds3103:m88ds3103_set_voltage: m88ds3103 7-0068:
fe_sec_voltage=0
[ 153.431553] m88ds3103:m88ds3103_diseqc_send_master_cmd: m88ds3103
7-0068: msg=e0 10 39 f0
[ 153.556188] m88ds3103:m88ds3103_diseqc_send_master_cmd: m88ds3103
7-0068: diseqc tx timeout
[ 153.557299] m88ds3103:m88ds3103_diseqc_send_master_cmd: m88ds3103
7-0068: failed=-110
[ 153.557337] m88ds3103:m88ds3103_set_tone: m88ds3103 7-0068:
fe_sec_tone_mode=1
I'll try to reinsert the card and check the EFI if there's something
concerning the card.
Regards,
Hendrik
Am Thu, 28 Apr 2016 11:27:48 +0300
schrieb Olli Salonen <olli.salonen@iki.fi>:
> Hi Hendrik,
>
> Can you check that the chip on the board is indeed M88DS3103? I could
> not read the text on the chip on the photo you sent earlier.
>
> Furthermore, could you load the m88ds3103 driver with debugging
> enabled before loading the cx23885 module:
> modprobe m88ds3103 dyndbg==pmf
>
> Then send the dmesg printout and maybe we can get some hints why the
> firmware is not running.
>
> Cheers,
> -olli
>
> On 27 April 2016 at 22:39, Hendrik Oenings <debian@oenings.de> wrote:
> > Hi together,
> >
> > I tried to recompile with the newest media_tree, so I just copied
> > your modifications to the new media_tree. (I also refetched the
> > media_build.) It wasn't very helpful, but I've seen that there is a
> > kernel error message (which was there before too, but I hadn't seen
> > it because I worked on X).
> >
> > $ su -c "modprobe cx23885"
> > modprobe: ERROR: could not insert 'cx23885': Exec format error
> > $ dmesg
> > ...
> > [XXXXXX.XXXXXX] frame_vector: exports duplicate symbol
> > frame_vector_create (owned by kernel)
> >
> > I've looked up the reason for the re-export and I have seen that
> > frame_vector was built as an module, but is compiled into the
> > kernel.
> >
> > Changing this in the ./media/v4l/.config from m to y worked, so I
> > can now load the module.
> >
> > The kernel message is gone away, but there is another problem now,
> > dmesg says and w_scan doesn't work either:
> >
> > [XXX] m88ds3103 7-0068: found a 'Montage Technology M88DS3103' in
> > cold state
> >
> > [XXX] m88ds3103 7-0068: downloading firmware from file
> > 'dvb-demod-m88ds3103.fw'
> >
> > [XXX] m88ds3103 7-0068: firmware did not run
> >
> > I've copied the firmware as suggested to /lib/firmware.
> >
> > Regards,
> > Hendrik
> >
> > Am Tue, 26 Apr 2016 09:03:24 +0300
> > schrieb Olli Salonen <olli.salonen@iki.fi>:
> >
> >> Hi Hendrik, Hans,
> >>
> >> My media_tree Hendrik is pulling from Github is just a rather
> >> recent copy of the media_tree master branch on git.linuxtv.org
> >> (it's missing like the last 10 patches that have been added within
> >> the last 24 hours) with 2 simple patches on top that should not
> >> break anything.
> >>
> >> Also, the media_build is recent, since you just cloned it.
> >>
> >> Hans, do you know if there are any known issues with the current
> >> media_build/media_tree on certain kernels?
> >>
> >> Thanks.
> >>
> >> Cheers,
> >> -olli
> >>
> >> On 25 April 2016 at 19:14, Hendrik Oenings <debian@oenings.de>
> >> wrote:
> >> > Hi Olli,
> >> >
> >> > I've tested the driver, it compiles well and I've installed it
> >> > on my system.
> >> > But there's a problem: Everytime I try to load the driver (exact:
> >> > the module cx23885), modprobe (or insmod) is giving me the
> >> > following: # modprobe cx23885
> >> > modprobe: ERROR: could not insert 'cx23885': Exec format error
> >> >
> >> > I've also tried to compile it with the current 4.6er kernel, but
> >> > it stays the same.
> >> > $ uname -r
> >> > 4.6.0-rc5
> >> >
> >> > I've also tried to recompile the driver, but it didn't help.
> >> >
> >> > Maybe it is important to mention that some patches fail at the
> >> > beginning of the build process (pr_fmt, debug).
> >> >
> >> > The installed module seems to be correct file format (my arch is
> >> > x86_64):
> >> > $ file \
> >> > /lib/modules/4.6.0-rc5/kernel/drivers/media/pci/cx23885/cx23885.ko
> >> >
> >> > /lib/modules/4.6.0-rc5/kernel/drivers/media/pci/cx23885/cx23885.ko:
> >> > ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV),
> >> > BuildID[sha1]=07a3f2f2fe383ab691b0022568dcd4d8315dc4b8, not
> >> > stripped
> >> >
> >> > Regards,
> >> > Hendrik
> >> >
> >> > On Mo, 25 Apr 2016 11:56:37 +0300, Olli Salonen
> >> > <olli.salonen@iki.fi> wrote:
> >> >
> >> >> Hello Hendrik,
> >> >>
> >> >> I've created an initial version of the driver.
> >> >> https://github.com/trsqr/media_tree/commit/b59f25b18bbe84e009618eefeaf646f5939bdd53
> >> >>
> >> >> To build, do the following:
> >> >>
> >> >> git clone git://linuxtv.org/media_build.git
> >> >> git clone --depth=1 https://github.com/trsqr/media_tree.git -b
> >> >> s472 ./media cd media_build
> >> >> make dir DIR=../media
> >> >> make distclean
> >> >> make
> >> >>
> >> >> To install after a successful build:
> >> >>
> >> >> sudo make install
> >> >>
> >> >> Download also the following firmware and place it
> >> >> in /lib/firmware:
> >> >> http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/3.B/
> >> >>
> >> >> The thing is, I had to guess the following parameters in
> >> >> drivers/media/pci/cx23885/cx23885-dvb.c file:
> >> >>
> >> >> +static const struct m88ds3103_config
> >> >> tevii_s472_m88ds3103_config = {
> >> >> + .i2c_addr = 0x68,
> >> >> + .clock = 27000000,
> >> >> + .i2c_wr_max = 33,
> >> >> + .clock_out = 0,
> >> >> + .ts_mode = M88DS3103_TS_PARALLEL,
> >> >> + .ts_clk = 16000,
> >> >> + .ts_clk_pol = 0,
> >> >> + .lnb_en_pol = 0,
> >> >> + .lnb_hv_pol = 1,
> >> >> + .agc = 0x99,
> >> >> +};
> >> >>
> >> >> If the driver does not work (it loads and appears to tune, but
> >> >> does not find channels), try altering ts_clk_pol, lnb_en_pol and
> >> >> lnb_hv_pol. The possible values are 1 and 0 so there should not
> >> >> be that many iterations needed.. Current values are based on
> >> >> best guess.
> >> >>
> >> >> Cheers,
> >> >> -olli
> >> >>
> >> >>
> >> >>
> >> >> On 24 April 2016 at 19:00, Hendrik Oenings <debian@oenings.de>
> >> >> wrote:
> >> >> > Hi Olli,
> >> >> >
> >> >> > I'm glad that there is someone trying to help me and of course
> >> >> > I'm able to test a driver.
> >> >> >
> >> >> > Because of the attached photos, I think it is better not to
> >> >> > send this mail to the mailing list.
> >> >> >
> >> >> > cx23885, m88ds3103 and m88ts2022 are the values I also think
> >> >> > they're correct. cx23885 is also mentioned by lspci, the other
> >> >> > values I've also seen often while searching for a solution.
> >> >> >
> >> >> > Here is also the full output of lspci concerning the tv card
> >> >> > which is probably helpful.
> >> >> > # lspci -vv
> >> >> > [...]
> >> >> > 03:00.0 Multimedia video controller: Conexant Systems, Inc.
> >> >> > CX23885 PCI Video and Audio Decoder (rev 04) Subsystem: Device
> >> >> > d472:9022 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
> >> >> > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status:
> >> >> > Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> >> >> > <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line
> >> >> > Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0:
> >> >> > Memory at f7c00000 (64-bit, non-prefetchable) [size=2M]
> >> >> > Capabilities: [40] Express (v1) Endpoint, MSI 00 DevCap:
> >> >> > MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> >> >> > ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> >> >> > DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> >> >> > Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >> >> > MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr-
> >> >> > UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> >> >> > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> >> >> > Exit Latency L0s <2us, L1 <4us ClockPM- Surprise- LLActRep-
> >> >> > BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes
> >> >> > Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt-
> >> >> > AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
> >> >> > SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [80] Power
> >> >> > Management version 2 Flags: PMEClk- DSI+ D1+ D2+
> >> >> > AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0
> >> >> > NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities:
> >> >> > [90] Vital Product Data Product Name: " End
> >> >> > Capabilities: [a0] MSI: Enable- Count=1/1 Maskable-
> >> >> > 64bit+ Address: 0000000000000000 Data: 0000
> >> >> > Capabilities: [100 v1] Advanced Error Reporting
> >> >> > UESta: DLP- SDES- TLP- FCP- CmpltTO-
> >> >> > CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >> >> > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> >> >> > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+
> >> >> > SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
> >> >> > ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP-
> >> >> > Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP-
> >> >> > BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error
> >> >> > Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities:
> >> >> > [200 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns
> >> >> > PATEntryBits=1 Arb: Fixed+ WRR32+ WRR64+ WRR128-
> >> >> > Ctrl: ArbSelect=WRR64 Status: InProgress- Port Arbitration
> >> >> > Table [240] <?> VC0: Caps: PATOffset=00 MaxTimeSlots=1
> >> >> > RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
> >> >> > WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed
> >> >> > TC/VC=01 Status: NegoPending- InProgress-
> >> >> > Kernel driver in use: cx23885
> >> >> > Kernel modules: cx23885
> >> >> > [...]
> >> >> >
> >> >> > Regards,
> >> >> > Hendrik
> >> >> >
> >> >> > On Sun, 24 Apr 2016 08:34:14 +0300
> >> >> > Olli Salonen <olli.salonen@iki.fi> wrote:
> >> >> >> Hi Hendrik,
> >> >> >>
> >> >> >> Can you take a high resolution picture of the device? I can
> >> >> >> build you a test driver if you're able to try it out for me?
> >> >> >>
> >> >> >> I believe it's CX23885, M88DS3103 and M88TS2022, but it
> >> >> >> could be good if you can check.
> >> >> >>
> >> >> >> Cheers,
> >> >> >> -olli
> >> >> >>
> >> >> >> On 23 April 2016 at 15:51, Hendrik Oenings
> >> >> >> <debian@oenings.de> wrote:
> >> >> >> > Hi all,
> >> >> >> >
> >> >> >> > I'm trying to use the dvb-s2 pci-express card "TeVii S472"
> >> >> >> > with the linux kernel. I haven't found a usable driver
> >> >> >> > until now, but I've seen that the previous cards (S471,
> >> >> >> > S470) are supported by the current linux kernel. The
> >> >> >> > driver from the manufacturer's site is more than one year
> >> >> >> > old and doesn't compile with current kernels.
> >> >> >> >
> >> >> >> > I'd be grateful for any information or ideas.
> >> >> >> >
> >> >> >> > Regards,
> >> >> >> > Hendrik
> >> >> >> > --
> >> >> >> > To unsubscribe from this list: send the line "unsubscribe
> >> >> >> > linux-media" in the body of a message to
> >> >> >> > majordomo@vger.kernel.org More majordomo info at
> >> >> >> > http://vger.kernel.org/majordomo-info.html
> >> >> >
> >> >
> >> > --
> >> > To unsubscribe from this list: send the line "unsubscribe
> >> > linux-media" in the body of a message to
> >> > majordomo@vger.kernel.org More majordomo info at
> >> > http://vger.kernel.org/majordomo-info.html
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe
> >> linux-media" in the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at
> >> http://vger.kernel.org/majordomo-info.html
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-media" in the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-media" in the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-04-28 14:50 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-23 12:51 dvb-s2 card "TeVii S472" (cx23885) Hendrik Oenings
[not found] ` <CAAZRmGzG72hm_sd9qpYx7Mo28oSxBgRghPRt42OPN-3xnj94uw@mail.gmail.com>
[not found] ` <20160424180038.03776e74@spock>
[not found] ` <CAAZRmGyDJJPRgNKD25DL=a1fyYX3rP0-tcbxcP+7AJv5wVz_Uw@mail.gmail.com>
2016-04-25 16:14 ` Hendrik Oenings
2016-04-26 6:03 ` Olli Salonen
2016-04-27 19:39 ` Hendrik Oenings
2016-04-28 8:27 ` Olli Salonen
2016-04-28 14:50 ` Hendrik Oenings
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.