* [PATCH v3 0/8] Add support for rk818
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
Changes since v2:
- Split refactoring patch into 2 patches so this can be more easily reviewed
- Added Acked-by from Mark Brown in patch 5
- Added Acked-by from Rob Herring in patch 6
- Added Acked-by from Stephen Boyd in patch 7
- Added Acked-by from Alexandre Belloni in patch 8
Wadim Egorov (8):
drivers: mfd: rk808: rename rk808 struct to rk8xx
mfd: RK808: Add RK818 support
regulator: rk808: remove linear range definitions with a single range
regulator: rk808: Migrate to regulator core's simplified DT parsing
code
regulator: rk808: Add regulator driver for RK818
mfd: dt-bindings: Add RK818 device tree bindings document
clk: Kconfig: Name RK818 in Kconfig for COMMON_CLK_RK808
rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808
Documentation/devicetree/bindings/mfd/rk808.txt | 37 +-
drivers/clk/Kconfig | 4 +-
drivers/clk/clk-rk808.c | 20 +-
drivers/mfd/Kconfig | 4 +-
drivers/mfd/rk808.c | 253 +++++++++++---
drivers/regulator/Kconfig | 4 +-
drivers/regulator/rk808-regulator.c | 427 +++++++++++++-----------
drivers/rtc/Kconfig | 4 +-
drivers/rtc/rtc-rk808.c | 50 +--
include/linux/mfd/rk808.h | 164 ++++++++-
10 files changed, 675 insertions(+), 292 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 57+ messages in thread
* [rtc-linux] [PATCH v3 0/8] Add support for rk818
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
Changes since v2:
- Split refactoring patch into 2 patches so this can be more easily reviewed
- Added Acked-by from Mark Brown in patch 5
- Added Acked-by from Rob Herring in patch 6
- Added Acked-by from Stephen Boyd in patch 7
- Added Acked-by from Alexandre Belloni in patch 8
Wadim Egorov (8):
drivers: mfd: rk808: rename rk808 struct to rk8xx
mfd: RK808: Add RK818 support
regulator: rk808: remove linear range definitions with a single range
regulator: rk808: Migrate to regulator core's simplified DT parsing
code
regulator: rk808: Add regulator driver for RK818
mfd: dt-bindings: Add RK818 device tree bindings document
clk: Kconfig: Name RK818 in Kconfig for COMMON_CLK_RK808
rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808
Documentation/devicetree/bindings/mfd/rk808.txt | 37 +-
drivers/clk/Kconfig | 4 +-
drivers/clk/clk-rk808.c | 20 +-
drivers/mfd/Kconfig | 4 +-
drivers/mfd/rk808.c | 253 +++++++++++---
drivers/regulator/Kconfig | 4 +-
drivers/regulator/rk808-regulator.c | 427 +++++++++++++-----------
drivers/rtc/Kconfig | 4 +-
drivers/rtc/rtc-rk808.c | 50 +--
include/linux/mfd/rk808.h | 164 ++++++++-
10 files changed, 675 insertions(+), 292 deletions(-)
--
1.9.1
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH v3 1/8] drivers: mfd: rk808: rename rk808 struct to rk8xx
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
@ 2016-04-25 13:20 ` Wadim Egorov
-1 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
This patch renames the rk808 struct. So it is more clear that this
struct can be shared between all RK8XX related PMIC drivers.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
drivers/clk/clk-rk808.c | 20 +++++++--------
drivers/mfd/rk808.c | 36 +++++++++++++-------------
drivers/regulator/rk808-regulator.c | 8 +++---
drivers/rtc/rtc-rk808.c | 50 ++++++++++++++++++-------------------
include/linux/mfd/rk808.h | 2 +-
5 files changed, 58 insertions(+), 58 deletions(-)
diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c
index 0fee2f4..6df2e72 100644
--- a/drivers/clk/clk-rk808.c
+++ b/drivers/clk/clk-rk808.c
@@ -25,7 +25,7 @@
#define RK808_NR_OUTPUT 2
struct rk808_clkout {
- struct rk808 *rk808;
+ struct rk8xx *rk8xx;
struct clk_onecell_data clk_data;
struct clk_hw clkout1_hw;
struct clk_hw clkout2_hw;
@@ -42,9 +42,9 @@ static int rk808_clkout2_enable(struct clk_hw *hw, bool enable)
struct rk808_clkout *rk808_clkout = container_of(hw,
struct rk808_clkout,
clkout2_hw);
- struct rk808 *rk808 = rk808_clkout->rk808;
+ struct rk8xx *rk8xx = rk808_clkout->rk8xx;
- return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG,
+ return regmap_update_bits(rk8xx->regmap, RK808_CLK32OUT_REG,
CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0);
}
@@ -63,10 +63,10 @@ static int rk808_clkout2_is_prepared(struct clk_hw *hw)
struct rk808_clkout *rk808_clkout = container_of(hw,
struct rk808_clkout,
clkout2_hw);
- struct rk808 *rk808 = rk808_clkout->rk808;
+ struct rk8xx *rk8xx = rk808_clkout->rk8xx;
uint32_t val;
- int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val);
+ int ret = regmap_read(rk8xx->regmap, RK808_CLK32OUT_REG, &val);
if (ret < 0)
return ret;
@@ -87,8 +87,8 @@ static const struct clk_ops rk808_clkout2_ops = {
static int rk808_clkout_probe(struct platform_device *pdev)
{
- struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
- struct i2c_client *client = rk808->i2c;
+ struct rk8xx *rk8xx = dev_get_drvdata(pdev->dev.parent);
+ struct i2c_client *client = rk8xx->i2c;
struct device_node *node = client->dev.of_node;
struct clk_init_data init = {};
struct clk **clk_table;
@@ -99,7 +99,7 @@ static int rk808_clkout_probe(struct platform_device *pdev)
if (!rk808_clkout)
return -ENOMEM;
- rk808_clkout->rk808 = rk808;
+ rk808_clkout->rk8xx = rk8xx;
clk_table = devm_kcalloc(&client->dev, RK808_NR_OUTPUT,
sizeof(struct clk *), GFP_KERNEL);
@@ -144,8 +144,8 @@ static int rk808_clkout_probe(struct platform_device *pdev)
static int rk808_clkout_remove(struct platform_device *pdev)
{
- struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
- struct i2c_client *client = rk808->i2c;
+ struct rk8xx *rk8xx = dev_get_drvdata(pdev->dev.parent);
+ struct i2c_client *client = rk8xx->i2c;
struct device_node *node = client->dev.of_node;
of_clk_del_provider(node);
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 4b1e439..0386251 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -152,15 +152,15 @@ static struct i2c_client *rk808_i2c_client;
static void rk808_device_shutdown(void)
{
int ret;
- struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+ struct rk8xx *rk8xx = i2c_get_clientdata(rk808_i2c_client);
- if (!rk808) {
+ if (!rk8xx) {
dev_warn(&rk808_i2c_client->dev,
"have no rk808, so do nothing here\n");
return;
}
- ret = regmap_update_bits(rk808->regmap,
+ ret = regmap_update_bits(rk8xx->regmap,
RK808_DEVCTRL_REG,
DEV_OFF_RST, DEV_OFF_RST);
if (ret)
@@ -171,7 +171,7 @@ static int rk808_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device_node *np = client->dev.of_node;
- struct rk808 *rk808;
+ struct rk8xx *rk8xx;
int pm_off = 0;
int ret;
int i;
@@ -181,18 +181,18 @@ static int rk808_probe(struct i2c_client *client,
return -EINVAL;
}
- rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
- if (!rk808)
+ rk8xx = devm_kzalloc(&client->dev, sizeof(*rk8xx), GFP_KERNEL);
+ if (!rk8xx)
return -ENOMEM;
- rk808->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
- if (IS_ERR(rk808->regmap)) {
+ rk8xx->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
+ if (IS_ERR(rk8xx->regmap)) {
dev_err(&client->dev, "regmap initialization failed\n");
- return PTR_ERR(rk808->regmap);
+ return PTR_ERR(rk8xx->regmap);
}
for (i = 0; i < ARRAY_SIZE(pre_init_reg); i++) {
- ret = regmap_update_bits(rk808->regmap, pre_init_reg[i].addr,
+ ret = regmap_update_bits(rk8xx->regmap, pre_init_reg[i].addr,
pre_init_reg[i].mask,
pre_init_reg[i].value);
if (ret) {
@@ -202,20 +202,20 @@ static int rk808_probe(struct i2c_client *client,
}
}
- ret = regmap_add_irq_chip(rk808->regmap, client->irq,
+ ret = regmap_add_irq_chip(rk8xx->regmap, client->irq,
IRQF_ONESHOT, -1,
- &rk808_irq_chip, &rk808->irq_data);
+ &rk808_irq_chip, &rk8xx->irq_data);
if (ret) {
dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
return ret;
}
- rk808->i2c = client;
- i2c_set_clientdata(client, rk808);
+ rk8xx->i2c = client;
+ i2c_set_clientdata(client, rk8xx);
ret = mfd_add_devices(&client->dev, -1,
rk808s, ARRAY_SIZE(rk808s),
- NULL, 0, regmap_irq_get_domain(rk808->irq_data));
+ NULL, 0, regmap_irq_get_domain(rk8xx->irq_data));
if (ret) {
dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
goto err_irq;
@@ -231,15 +231,15 @@ static int rk808_probe(struct i2c_client *client,
return 0;
err_irq:
- regmap_del_irq_chip(client->irq, rk808->irq_data);
+ regmap_del_irq_chip(client->irq, rk8xx->irq_data);
return ret;
}
static int rk808_remove(struct i2c_client *client)
{
- struct rk808 *rk808 = i2c_get_clientdata(client);
+ struct rk8xx *rk8xx = i2c_get_clientdata(client);
- regmap_del_irq_chip(client->irq, rk808->irq_data);
+ regmap_del_irq_chip(client->irq, rk8xx->irq_data);
mfd_remove_devices(&client->dev);
pm_power_off = NULL;
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index d86a3dc..37aaba9 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -568,8 +568,8 @@ dt_parse_end:
static int rk808_regulator_probe(struct platform_device *pdev)
{
- struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
- struct i2c_client *client = rk808->i2c;
+ struct rk8xx *rk8xx = dev_get_drvdata(pdev->dev.parent);
+ struct i2c_client *client = rk8xx->i2c;
struct regulator_config config = {};
struct regulator_dev *rk808_rdev;
struct rk808_regulator_data *pdata;
@@ -580,7 +580,7 @@ static int rk808_regulator_probe(struct platform_device *pdev)
return -ENOMEM;
ret = rk808_regulator_dt_parse_pdata(&pdev->dev, &client->dev,
- rk808->regmap, pdata);
+ rk8xx->regmap, pdata);
if (ret < 0)
return ret;
@@ -594,7 +594,7 @@ static int rk808_regulator_probe(struct platform_device *pdev)
config.dev = &client->dev;
config.driver_data = pdata;
- config.regmap = rk808->regmap;
+ config.regmap = rk8xx->regmap;
config.of_node = rk808_reg_matches[i].of_node;
config.init_data = rk808_reg_matches[i].init_data;
diff --git a/drivers/rtc/rtc-rk808.c b/drivers/rtc/rtc-rk808.c
index 35c9aad..b3fe5a8 100644
--- a/drivers/rtc/rtc-rk808.c
+++ b/drivers/rtc/rtc-rk808.c
@@ -51,7 +51,7 @@
#define NUM_ALARM_REGS (RK808_ALARM_YEARS_REG - RK808_ALARM_SECONDS_REG + 1)
struct rk808_rtc {
- struct rk808 *rk808;
+ struct rk8xx *rk8xx;
struct rtc_device *rtc;
int irq;
};
@@ -96,12 +96,12 @@ static void gregorian_to_rockchip(struct rtc_time *tm)
static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
{
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
- struct rk808 *rk808 = rk808_rtc->rk808;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
u8 rtc_data[NUM_TIME_REGS];
int ret;
/* Force an update of the shadowed registers right now */
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_RTC_GET_TIME,
BIT_RTC_CTRL_REG_RTC_GET_TIME);
if (ret) {
@@ -115,7 +115,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
* 32khz. If we clear the GET_TIME bit here, the time of i2c transfer
* certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency.
*/
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_RTC_GET_TIME,
0);
if (ret) {
@@ -123,7 +123,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
return ret;
}
- ret = regmap_bulk_read(rk808->regmap, RK808_SECONDS_REG,
+ ret = regmap_bulk_read(rk8xx->regmap, RK808_SECONDS_REG,
rtc_data, NUM_TIME_REGS);
if (ret) {
dev_err(dev, "Failed to bulk read rtc_data: %d\n", ret);
@@ -149,7 +149,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
- struct rk808 *rk808 = rk808_rtc->rk808;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
u8 rtc_data[NUM_TIME_REGS];
int ret;
@@ -166,7 +166,7 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
rtc_data[6] = bin2bcd(tm->tm_wday);
/* Stop RTC while updating the RTC registers */
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_STOP_RTC_M,
BIT_RTC_CTRL_REG_STOP_RTC_M);
if (ret) {
@@ -174,14 +174,14 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
return ret;
}
- ret = regmap_bulk_write(rk808->regmap, RK808_SECONDS_REG,
+ ret = regmap_bulk_write(rk8xx->regmap, RK808_SECONDS_REG,
rtc_data, NUM_TIME_REGS);
if (ret) {
dev_err(dev, "Failed to bull write rtc_data: %d\n", ret);
return ret;
}
/* Start RTC again */
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_STOP_RTC_M, 0);
if (ret) {
dev_err(dev, "Failed to update RTC control: %d\n", ret);
@@ -194,12 +194,12 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
- struct rk808 *rk808 = rk808_rtc->rk808;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
u8 alrm_data[NUM_ALARM_REGS];
uint32_t int_reg;
int ret;
- ret = regmap_bulk_read(rk808->regmap, RK808_ALARM_SECONDS_REG,
+ ret = regmap_bulk_read(rk8xx->regmap, RK808_ALARM_SECONDS_REG,
alrm_data, NUM_ALARM_REGS);
alrm->time.tm_sec = bcd2bin(alrm_data[0] & SECONDS_REG_MSK);
@@ -210,7 +210,7 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
alrm->time.tm_year = (bcd2bin(alrm_data[5] & YEARS_REG_MSK)) + 100;
rockchip_to_gregorian(&alrm->time);
- ret = regmap_read(rk808->regmap, RK808_RTC_INT_REG, &int_reg);
+ ret = regmap_read(rk8xx->regmap, RK808_RTC_INT_REG, &int_reg);
if (ret) {
dev_err(dev, "Failed to read RTC INT REG: %d\n", ret);
return ret;
@@ -228,10 +228,10 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
static int rk808_rtc_stop_alarm(struct rk808_rtc *rk808_rtc)
{
- struct rk808 *rk808 = rk808_rtc->rk808;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
int ret;
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_INT_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_INT_REG,
BIT_RTC_INTERRUPTS_REG_IT_ALARM_M, 0);
return ret;
@@ -239,10 +239,10 @@ static int rk808_rtc_stop_alarm(struct rk808_rtc *rk808_rtc)
static int rk808_rtc_start_alarm(struct rk808_rtc *rk808_rtc)
{
- struct rk808 *rk808 = rk808_rtc->rk808;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
int ret;
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_INT_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_INT_REG,
BIT_RTC_INTERRUPTS_REG_IT_ALARM_M,
BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
@@ -252,7 +252,7 @@ static int rk808_rtc_start_alarm(struct rk808_rtc *rk808_rtc)
static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
- struct rk808 *rk808 = rk808_rtc->rk808;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
u8 alrm_data[NUM_ALARM_REGS];
int ret;
@@ -274,7 +274,7 @@ static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
alrm_data[4] = bin2bcd(alrm->time.tm_mon + 1);
alrm_data[5] = bin2bcd(alrm->time.tm_year - 100);
- ret = regmap_bulk_write(rk808->regmap, RK808_ALARM_SECONDS_REG,
+ ret = regmap_bulk_write(rk8xx->regmap, RK808_ALARM_SECONDS_REG,
alrm_data, NUM_ALARM_REGS);
if (ret) {
dev_err(dev, "Failed to bulk write: %d\n", ret);
@@ -314,11 +314,11 @@ static int rk808_rtc_alarm_irq_enable(struct device *dev,
static irqreturn_t rk808_alarm_irq(int irq, void *data)
{
struct rk808_rtc *rk808_rtc = data;
- struct rk808 *rk808 = rk808_rtc->rk808;
- struct i2c_client *client = rk808->i2c;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
+ struct i2c_client *client = rk8xx->i2c;
int ret;
- ret = regmap_write(rk808->regmap, RK808_RTC_STATUS_REG,
+ ret = regmap_write(rk8xx->regmap, RK808_RTC_STATUS_REG,
RTC_STATUS_MASK);
if (ret) {
dev_err(&client->dev,
@@ -373,7 +373,7 @@ static SIMPLE_DEV_PM_OPS(rk808_rtc_pm_ops,
static int rk808_rtc_probe(struct platform_device *pdev)
{
- struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
+ struct rk8xx *rk8xx = dev_get_drvdata(pdev->dev.parent);
struct rk808_rtc *rk808_rtc;
struct rtc_time tm;
int ret;
@@ -383,10 +383,10 @@ static int rk808_rtc_probe(struct platform_device *pdev)
return -ENOMEM;
platform_set_drvdata(pdev, rk808_rtc);
- rk808_rtc->rk808 = rk808;
+ rk808_rtc->rk8xx = rk8xx;
/* start rtc running by default, and use shadowed timer. */
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_STOP_RTC_M |
BIT_RTC_CTRL_REG_RTC_READSEL_M,
BIT_RTC_CTRL_REG_RTC_READSEL_M);
@@ -396,7 +396,7 @@ static int rk808_rtc_probe(struct platform_device *pdev)
return ret;
}
- ret = regmap_write(rk808->regmap, RK808_RTC_STATUS_REG,
+ ret = regmap_write(rk8xx->regmap, RK808_RTC_STATUS_REG,
RTC_STATUS_MASK);
if (ret) {
dev_err(&pdev->dev,
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 441b6ee..117d79f 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -191,7 +191,7 @@ enum {
BOOST_ILMIN_250MA,
};
-struct rk808 {
+struct rk8xx {
struct i2c_client *i2c;
struct regmap_irq_chip_data *irq_data;
struct regmap *regmap;
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [rtc-linux] [PATCH v3 1/8] drivers: mfd: rk808: rename rk808 struct to rk8xx
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
This patch renames the rk808 struct. So it is more clear that this
struct can be shared between all RK8XX related PMIC drivers.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
drivers/clk/clk-rk808.c | 20 +++++++--------
drivers/mfd/rk808.c | 36 +++++++++++++-------------
drivers/regulator/rk808-regulator.c | 8 +++---
drivers/rtc/rtc-rk808.c | 50 ++++++++++++++++++-------------------
include/linux/mfd/rk808.h | 2 +-
5 files changed, 58 insertions(+), 58 deletions(-)
diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c
index 0fee2f4..6df2e72 100644
--- a/drivers/clk/clk-rk808.c
+++ b/drivers/clk/clk-rk808.c
@@ -25,7 +25,7 @@
#define RK808_NR_OUTPUT 2
struct rk808_clkout {
- struct rk808 *rk808;
+ struct rk8xx *rk8xx;
struct clk_onecell_data clk_data;
struct clk_hw clkout1_hw;
struct clk_hw clkout2_hw;
@@ -42,9 +42,9 @@ static int rk808_clkout2_enable(struct clk_hw *hw, bool enable)
struct rk808_clkout *rk808_clkout = container_of(hw,
struct rk808_clkout,
clkout2_hw);
- struct rk808 *rk808 = rk808_clkout->rk808;
+ struct rk8xx *rk8xx = rk808_clkout->rk8xx;
- return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG,
+ return regmap_update_bits(rk8xx->regmap, RK808_CLK32OUT_REG,
CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0);
}
@@ -63,10 +63,10 @@ static int rk808_clkout2_is_prepared(struct clk_hw *hw)
struct rk808_clkout *rk808_clkout = container_of(hw,
struct rk808_clkout,
clkout2_hw);
- struct rk808 *rk808 = rk808_clkout->rk808;
+ struct rk8xx *rk8xx = rk808_clkout->rk8xx;
uint32_t val;
- int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val);
+ int ret = regmap_read(rk8xx->regmap, RK808_CLK32OUT_REG, &val);
if (ret < 0)
return ret;
@@ -87,8 +87,8 @@ static const struct clk_ops rk808_clkout2_ops = {
static int rk808_clkout_probe(struct platform_device *pdev)
{
- struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
- struct i2c_client *client = rk808->i2c;
+ struct rk8xx *rk8xx = dev_get_drvdata(pdev->dev.parent);
+ struct i2c_client *client = rk8xx->i2c;
struct device_node *node = client->dev.of_node;
struct clk_init_data init = {};
struct clk **clk_table;
@@ -99,7 +99,7 @@ static int rk808_clkout_probe(struct platform_device *pdev)
if (!rk808_clkout)
return -ENOMEM;
- rk808_clkout->rk808 = rk808;
+ rk808_clkout->rk8xx = rk8xx;
clk_table = devm_kcalloc(&client->dev, RK808_NR_OUTPUT,
sizeof(struct clk *), GFP_KERNEL);
@@ -144,8 +144,8 @@ static int rk808_clkout_probe(struct platform_device *pdev)
static int rk808_clkout_remove(struct platform_device *pdev)
{
- struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
- struct i2c_client *client = rk808->i2c;
+ struct rk8xx *rk8xx = dev_get_drvdata(pdev->dev.parent);
+ struct i2c_client *client = rk8xx->i2c;
struct device_node *node = client->dev.of_node;
of_clk_del_provider(node);
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 4b1e439..0386251 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -152,15 +152,15 @@ static struct i2c_client *rk808_i2c_client;
static void rk808_device_shutdown(void)
{
int ret;
- struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+ struct rk8xx *rk8xx = i2c_get_clientdata(rk808_i2c_client);
- if (!rk808) {
+ if (!rk8xx) {
dev_warn(&rk808_i2c_client->dev,
"have no rk808, so do nothing here\n");
return;
}
- ret = regmap_update_bits(rk808->regmap,
+ ret = regmap_update_bits(rk8xx->regmap,
RK808_DEVCTRL_REG,
DEV_OFF_RST, DEV_OFF_RST);
if (ret)
@@ -171,7 +171,7 @@ static int rk808_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device_node *np = client->dev.of_node;
- struct rk808 *rk808;
+ struct rk8xx *rk8xx;
int pm_off = 0;
int ret;
int i;
@@ -181,18 +181,18 @@ static int rk808_probe(struct i2c_client *client,
return -EINVAL;
}
- rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
- if (!rk808)
+ rk8xx = devm_kzalloc(&client->dev, sizeof(*rk8xx), GFP_KERNEL);
+ if (!rk8xx)
return -ENOMEM;
- rk808->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
- if (IS_ERR(rk808->regmap)) {
+ rk8xx->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
+ if (IS_ERR(rk8xx->regmap)) {
dev_err(&client->dev, "regmap initialization failed\n");
- return PTR_ERR(rk808->regmap);
+ return PTR_ERR(rk8xx->regmap);
}
for (i = 0; i < ARRAY_SIZE(pre_init_reg); i++) {
- ret = regmap_update_bits(rk808->regmap, pre_init_reg[i].addr,
+ ret = regmap_update_bits(rk8xx->regmap, pre_init_reg[i].addr,
pre_init_reg[i].mask,
pre_init_reg[i].value);
if (ret) {
@@ -202,20 +202,20 @@ static int rk808_probe(struct i2c_client *client,
}
}
- ret = regmap_add_irq_chip(rk808->regmap, client->irq,
+ ret = regmap_add_irq_chip(rk8xx->regmap, client->irq,
IRQF_ONESHOT, -1,
- &rk808_irq_chip, &rk808->irq_data);
+ &rk808_irq_chip, &rk8xx->irq_data);
if (ret) {
dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
return ret;
}
- rk808->i2c = client;
- i2c_set_clientdata(client, rk808);
+ rk8xx->i2c = client;
+ i2c_set_clientdata(client, rk8xx);
ret = mfd_add_devices(&client->dev, -1,
rk808s, ARRAY_SIZE(rk808s),
- NULL, 0, regmap_irq_get_domain(rk808->irq_data));
+ NULL, 0, regmap_irq_get_domain(rk8xx->irq_data));
if (ret) {
dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
goto err_irq;
@@ -231,15 +231,15 @@ static int rk808_probe(struct i2c_client *client,
return 0;
err_irq:
- regmap_del_irq_chip(client->irq, rk808->irq_data);
+ regmap_del_irq_chip(client->irq, rk8xx->irq_data);
return ret;
}
static int rk808_remove(struct i2c_client *client)
{
- struct rk808 *rk808 = i2c_get_clientdata(client);
+ struct rk8xx *rk8xx = i2c_get_clientdata(client);
- regmap_del_irq_chip(client->irq, rk808->irq_data);
+ regmap_del_irq_chip(client->irq, rk8xx->irq_data);
mfd_remove_devices(&client->dev);
pm_power_off = NULL;
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index d86a3dc..37aaba9 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -568,8 +568,8 @@ dt_parse_end:
static int rk808_regulator_probe(struct platform_device *pdev)
{
- struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
- struct i2c_client *client = rk808->i2c;
+ struct rk8xx *rk8xx = dev_get_drvdata(pdev->dev.parent);
+ struct i2c_client *client = rk8xx->i2c;
struct regulator_config config = {};
struct regulator_dev *rk808_rdev;
struct rk808_regulator_data *pdata;
@@ -580,7 +580,7 @@ static int rk808_regulator_probe(struct platform_device *pdev)
return -ENOMEM;
ret = rk808_regulator_dt_parse_pdata(&pdev->dev, &client->dev,
- rk808->regmap, pdata);
+ rk8xx->regmap, pdata);
if (ret < 0)
return ret;
@@ -594,7 +594,7 @@ static int rk808_regulator_probe(struct platform_device *pdev)
config.dev = &client->dev;
config.driver_data = pdata;
- config.regmap = rk808->regmap;
+ config.regmap = rk8xx->regmap;
config.of_node = rk808_reg_matches[i].of_node;
config.init_data = rk808_reg_matches[i].init_data;
diff --git a/drivers/rtc/rtc-rk808.c b/drivers/rtc/rtc-rk808.c
index 35c9aad..b3fe5a8 100644
--- a/drivers/rtc/rtc-rk808.c
+++ b/drivers/rtc/rtc-rk808.c
@@ -51,7 +51,7 @@
#define NUM_ALARM_REGS (RK808_ALARM_YEARS_REG - RK808_ALARM_SECONDS_REG + 1)
struct rk808_rtc {
- struct rk808 *rk808;
+ struct rk8xx *rk8xx;
struct rtc_device *rtc;
int irq;
};
@@ -96,12 +96,12 @@ static void gregorian_to_rockchip(struct rtc_time *tm)
static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
{
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
- struct rk808 *rk808 = rk808_rtc->rk808;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
u8 rtc_data[NUM_TIME_REGS];
int ret;
/* Force an update of the shadowed registers right now */
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_RTC_GET_TIME,
BIT_RTC_CTRL_REG_RTC_GET_TIME);
if (ret) {
@@ -115,7 +115,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
* 32khz. If we clear the GET_TIME bit here, the time of i2c transfer
* certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency.
*/
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_RTC_GET_TIME,
0);
if (ret) {
@@ -123,7 +123,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
return ret;
}
- ret = regmap_bulk_read(rk808->regmap, RK808_SECONDS_REG,
+ ret = regmap_bulk_read(rk8xx->regmap, RK808_SECONDS_REG,
rtc_data, NUM_TIME_REGS);
if (ret) {
dev_err(dev, "Failed to bulk read rtc_data: %d\n", ret);
@@ -149,7 +149,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
- struct rk808 *rk808 = rk808_rtc->rk808;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
u8 rtc_data[NUM_TIME_REGS];
int ret;
@@ -166,7 +166,7 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
rtc_data[6] = bin2bcd(tm->tm_wday);
/* Stop RTC while updating the RTC registers */
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_STOP_RTC_M,
BIT_RTC_CTRL_REG_STOP_RTC_M);
if (ret) {
@@ -174,14 +174,14 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
return ret;
}
- ret = regmap_bulk_write(rk808->regmap, RK808_SECONDS_REG,
+ ret = regmap_bulk_write(rk8xx->regmap, RK808_SECONDS_REG,
rtc_data, NUM_TIME_REGS);
if (ret) {
dev_err(dev, "Failed to bull write rtc_data: %d\n", ret);
return ret;
}
/* Start RTC again */
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_STOP_RTC_M, 0);
if (ret) {
dev_err(dev, "Failed to update RTC control: %d\n", ret);
@@ -194,12 +194,12 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
- struct rk808 *rk808 = rk808_rtc->rk808;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
u8 alrm_data[NUM_ALARM_REGS];
uint32_t int_reg;
int ret;
- ret = regmap_bulk_read(rk808->regmap, RK808_ALARM_SECONDS_REG,
+ ret = regmap_bulk_read(rk8xx->regmap, RK808_ALARM_SECONDS_REG,
alrm_data, NUM_ALARM_REGS);
alrm->time.tm_sec = bcd2bin(alrm_data[0] & SECONDS_REG_MSK);
@@ -210,7 +210,7 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
alrm->time.tm_year = (bcd2bin(alrm_data[5] & YEARS_REG_MSK)) + 100;
rockchip_to_gregorian(&alrm->time);
- ret = regmap_read(rk808->regmap, RK808_RTC_INT_REG, &int_reg);
+ ret = regmap_read(rk8xx->regmap, RK808_RTC_INT_REG, &int_reg);
if (ret) {
dev_err(dev, "Failed to read RTC INT REG: %d\n", ret);
return ret;
@@ -228,10 +228,10 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
static int rk808_rtc_stop_alarm(struct rk808_rtc *rk808_rtc)
{
- struct rk808 *rk808 = rk808_rtc->rk808;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
int ret;
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_INT_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_INT_REG,
BIT_RTC_INTERRUPTS_REG_IT_ALARM_M, 0);
return ret;
@@ -239,10 +239,10 @@ static int rk808_rtc_stop_alarm(struct rk808_rtc *rk808_rtc)
static int rk808_rtc_start_alarm(struct rk808_rtc *rk808_rtc)
{
- struct rk808 *rk808 = rk808_rtc->rk808;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
int ret;
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_INT_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_INT_REG,
BIT_RTC_INTERRUPTS_REG_IT_ALARM_M,
BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
@@ -252,7 +252,7 @@ static int rk808_rtc_start_alarm(struct rk808_rtc *rk808_rtc)
static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
- struct rk808 *rk808 = rk808_rtc->rk808;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
u8 alrm_data[NUM_ALARM_REGS];
int ret;
@@ -274,7 +274,7 @@ static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
alrm_data[4] = bin2bcd(alrm->time.tm_mon + 1);
alrm_data[5] = bin2bcd(alrm->time.tm_year - 100);
- ret = regmap_bulk_write(rk808->regmap, RK808_ALARM_SECONDS_REG,
+ ret = regmap_bulk_write(rk8xx->regmap, RK808_ALARM_SECONDS_REG,
alrm_data, NUM_ALARM_REGS);
if (ret) {
dev_err(dev, "Failed to bulk write: %d\n", ret);
@@ -314,11 +314,11 @@ static int rk808_rtc_alarm_irq_enable(struct device *dev,
static irqreturn_t rk808_alarm_irq(int irq, void *data)
{
struct rk808_rtc *rk808_rtc = data;
- struct rk808 *rk808 = rk808_rtc->rk808;
- struct i2c_client *client = rk808->i2c;
+ struct rk8xx *rk8xx = rk808_rtc->rk8xx;
+ struct i2c_client *client = rk8xx->i2c;
int ret;
- ret = regmap_write(rk808->regmap, RK808_RTC_STATUS_REG,
+ ret = regmap_write(rk8xx->regmap, RK808_RTC_STATUS_REG,
RTC_STATUS_MASK);
if (ret) {
dev_err(&client->dev,
@@ -373,7 +373,7 @@ static SIMPLE_DEV_PM_OPS(rk808_rtc_pm_ops,
static int rk808_rtc_probe(struct platform_device *pdev)
{
- struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
+ struct rk8xx *rk8xx = dev_get_drvdata(pdev->dev.parent);
struct rk808_rtc *rk808_rtc;
struct rtc_time tm;
int ret;
@@ -383,10 +383,10 @@ static int rk808_rtc_probe(struct platform_device *pdev)
return -ENOMEM;
platform_set_drvdata(pdev, rk808_rtc);
- rk808_rtc->rk808 = rk808;
+ rk808_rtc->rk8xx = rk8xx;
/* start rtc running by default, and use shadowed timer. */
- ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+ ret = regmap_update_bits(rk8xx->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_STOP_RTC_M |
BIT_RTC_CTRL_REG_RTC_READSEL_M,
BIT_RTC_CTRL_REG_RTC_READSEL_M);
@@ -396,7 +396,7 @@ static int rk808_rtc_probe(struct platform_device *pdev)
return ret;
}
- ret = regmap_write(rk808->regmap, RK808_RTC_STATUS_REG,
+ ret = regmap_write(rk8xx->regmap, RK808_RTC_STATUS_REG,
RTC_STATUS_MASK);
if (ret) {
dev_err(&pdev->dev,
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 441b6ee..117d79f 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -191,7 +191,7 @@ enum {
BOOST_ILMIN_250MA,
};
-struct rk808 {
+struct rk8xx {
struct i2c_client *i2c;
struct regmap_irq_chip_data *irq_data;
struct regmap *regmap;
--
1.9.1
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v3 2/8] mfd: RK808: Add RK818 support
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
(?)
@ 2016-04-25 13:20 ` Wadim Egorov
-1 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
The RK818 chip is a power management IC for multimedia and handheld
devices. It contains the following components:
- Regulators
- RTC
- Clkout
- battery support
Both chips RK808 and RK818 are using a similar register map.
So we can reuse the RTC and Clkout functionality.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
drivers/mfd/Kconfig | 4 +-
drivers/mfd/rk808.c | 227 +++++++++++++++++++++++++++++++++++++++-------
include/linux/mfd/rk808.h | 162 +++++++++++++++++++++++++++++++--
3 files changed, 348 insertions(+), 45 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index eea61e3..0a5b1c0 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -814,13 +814,13 @@ config MFD_RC5T583
different functionality of the device.
config MFD_RK808
- tristate "Rockchip RK808 Power Management chip"
+ tristate "Rockchip RK808/RK818 Power Management chip"
depends on I2C && OF
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
help
- If you say yes here you get support for the RK808
+ If you say yes here you get support for the RK808 and RK818
Power Management chips.
This driver provides common support for accessing the device
through I2C interface. The device supports multiple sub-devices
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 0386251..8ced05e 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -6,6 +6,10 @@
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
@@ -22,12 +26,7 @@
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/regmap.h>
-
-struct rk808_reg_data {
- int addr;
- int mask;
- int value;
-};
+#include <linux/of_device.h>
static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
{
@@ -57,6 +56,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
return false;
}
+static const struct regmap_config rk818_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RK818_USB_CTRL_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = rk808_is_volatile_reg,
+};
+
static const struct regmap_config rk808_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -83,7 +90,17 @@ static const struct mfd_cell rk808s[] = {
},
};
-static const struct rk808_reg_data pre_init_reg[] = {
+static const struct mfd_cell rk818s[] = {
+ { .name = "rk808-clkout", },
+ { .name = "rk808-regulator", },
+ {
+ .name = "rk808-rtc",
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resources = &rtc_resources[0],
+ },
+};
+
+static const struct rk8xx_reg_data rk808_pre_init_reg[] = {
{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
{ RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
@@ -94,6 +111,22 @@ static const struct rk808_reg_data pre_init_reg[] = {
VB_LO_SEL_3500MV },
};
+static const struct rk8xx_reg_data rk818_pre_init_reg[] = {
+ { RK818_USB_CTRL_REG, RK818_USB_ILIM_SEL_MASK,
+ RK818_USB_ILMIN_2000MA },
+ /* close charger when usb lower then 3.4V */
+ { RK818_USB_CTRL_REG, RK818_USB_CHG_SD_VSEL_MASK, (0x7 << 4) },
+ /* no action when vref */
+ { RK818_H5V_EN_REG, BIT(1), RK818_REF_RDY_CTRL },
+ /* enable HDMI 5V */
+ { RK818_H5V_EN_REG, BIT(0), RK818_H5V_EN },
+ /* improve efficiency */
+ { RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_250MA },
+ { RK818_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_250MA },
+ { RK818_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
+ { RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT | VB_LO_SEL_3500MV },
+};
+
static const struct regmap_irq rk808_irqs[] = {
/* INT_STS */
[RK808_IRQ_VOUT_LO] = {
@@ -136,6 +169,76 @@ static const struct regmap_irq rk808_irqs[] = {
},
};
+static const struct regmap_irq rk818_irqs[] = {
+ /* INT_STS */
+ [RK818_IRQ_VOUT_LO] = {
+ .mask = RK818_IRQ_VOUT_LO_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_VB_LO] = {
+ .mask = RK818_IRQ_VB_LO_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_PWRON] = {
+ .mask = RK818_IRQ_PWRON_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_PWRON_LP] = {
+ .mask = RK818_IRQ_PWRON_LP_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_HOTDIE] = {
+ .mask = RK818_IRQ_HOTDIE_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_RTC_ALARM] = {
+ .mask = RK818_IRQ_RTC_ALARM_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_RTC_PERIOD] = {
+ .mask = RK818_IRQ_RTC_PERIOD_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_USB_OV] = {
+ .mask = RK818_IRQ_USB_OV_MSK,
+ .reg_offset = 0,
+ },
+
+ /* INT_STS2 */
+ [RK818_IRQ_PLUG_IN] = {
+ .mask = RK818_IRQ_PLUG_IN_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_PLUG_OUT] = {
+ .mask = RK818_IRQ_PLUG_OUT_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_OK] = {
+ .mask = RK818_IRQ_CHG_OK_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_TE] = {
+ .mask = RK818_IRQ_CHG_TE_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_TS1] = {
+ .mask = RK818_IRQ_CHG_TS1_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_TS2] = {
+ .mask = RK818_IRQ_TS2_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_CVTLIM] = {
+ .mask = RK818_IRQ_CHG_CVTLIM_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_DISCHG_ILIM] = {
+ .mask = RK818_IRQ_DISCHG_ILIM_MSK,
+ .reg_offset = 1,
+ },
+};
+
static struct regmap_irq_chip rk808_irq_chip = {
.name = "rk808",
.irqs = rk808_irqs,
@@ -148,6 +251,18 @@ static struct regmap_irq_chip rk808_irq_chip = {
.init_ack_masked = true,
};
+static struct regmap_irq_chip rk818_irq_chip = {
+ .name = "rk818",
+ .irqs = rk818_irqs,
+ .num_irqs = ARRAY_SIZE(rk818_irqs),
+ .num_regs = 2,
+ .irq_reg_stride = 2,
+ .status_base = RK818_INT_STS_REG1,
+ .mask_base = RK818_INT_STS_MSK_REG1,
+ .ack_base = RK818_INT_STS_REG1,
+ .init_ack_masked = true,
+};
+
static struct i2c_client *rk808_i2c_client;
static void rk808_device_shutdown(void)
{
@@ -167,6 +282,48 @@ static void rk808_device_shutdown(void)
dev_err(&rk808_i2c_client->dev, "power off error!\n");
}
+static const struct of_device_id rk808_of_match[] = {
+ { .compatible = "rockchip,rk808", .data = (void *) RK808_ID },
+ { .compatible = "rockchip,rk818", .data = (void *) RK818_ID },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rk808_of_match);
+
+static int rk8xx_match_device(struct rk8xx *rk8xx, struct device *dev)
+{
+ const struct of_device_id *of_id;
+
+ of_id = of_match_device(rk808_of_match, dev);
+ if (!of_id) {
+ dev_err(dev, "Unable to match OF ID\n");
+ return -ENODEV;
+ }
+ rk8xx->variant = (long) of_id->data;
+
+ switch (rk8xx->variant) {
+ case RK808_ID:
+ rk8xx->nr_cells = ARRAY_SIZE(rk808s);
+ rk8xx->cells = rk808s;
+ rk8xx->regmap_cfg = &rk808_regmap_config;
+ rk8xx->regmap_irq_chip = &rk808_irq_chip;
+ rk8xx->pre_init_reg = rk808_pre_init_reg;
+ rk8xx->nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
+ break;
+ case RK818_ID:
+ rk8xx->nr_cells = ARRAY_SIZE(rk818s);
+ rk8xx->cells = rk818s;
+ rk8xx->regmap_cfg = &rk818_regmap_config;
+ rk8xx->regmap_irq_chip = &rk818_irq_chip;
+ rk8xx->pre_init_reg = rk818_pre_init_reg;
+ rk8xx->nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
+ break;
+ default:
+ dev_err(dev, "unsupported RK8XX ID %lu\n", rk8xx->variant);
+ return -EINVAL;
+ }
+
+ return 0;
+}
static int rk808_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -176,45 +333,51 @@ static int rk808_probe(struct i2c_client *client,
int ret;
int i;
- if (!client->irq) {
- dev_err(&client->dev, "No interrupt support, no core IRQ\n");
- return -EINVAL;
- }
-
rk8xx = devm_kzalloc(&client->dev, sizeof(*rk8xx), GFP_KERNEL);
if (!rk8xx)
return -ENOMEM;
- rk8xx->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
+ ret = rk8xx_match_device(rk8xx, &client->dev);
+ if (ret)
+ return ret;
+
+ rk8xx->i2c = client;
+ i2c_set_clientdata(client, rk8xx);
+
+ rk8xx->regmap = devm_regmap_init_i2c(client, rk8xx->regmap_cfg);
if (IS_ERR(rk8xx->regmap)) {
dev_err(&client->dev, "regmap initialization failed\n");
return PTR_ERR(rk8xx->regmap);
}
- for (i = 0; i < ARRAY_SIZE(pre_init_reg); i++) {
- ret = regmap_update_bits(rk8xx->regmap, pre_init_reg[i].addr,
- pre_init_reg[i].mask,
- pre_init_reg[i].value);
- if (ret) {
- dev_err(&client->dev,
- "0x%x write err\n", pre_init_reg[i].addr);
- return ret;
- }
+ if (!client->irq) {
+ dev_err(&client->dev, "No interrupt support, no core IRQ\n");
+ return -EINVAL;
}
ret = regmap_add_irq_chip(rk8xx->regmap, client->irq,
IRQF_ONESHOT, -1,
- &rk808_irq_chip, &rk8xx->irq_data);
+ rk8xx->regmap_irq_chip, &rk8xx->irq_data);
if (ret) {
dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
return ret;
}
- rk8xx->i2c = client;
- i2c_set_clientdata(client, rk8xx);
+ for (i = 0; i < rk8xx->nr_pre_init_regs; i++) {
+ ret = regmap_update_bits(rk8xx->regmap,
+ rk8xx->pre_init_reg[i].addr,
+ rk8xx->pre_init_reg[i].mask,
+ rk8xx->pre_init_reg[i].value);
+ if (ret) {
+ dev_err(&client->dev,
+ "0x%x write err\n",
+ rk8xx->pre_init_reg[i].addr);
+ return ret;
+ }
+ }
- ret = mfd_add_devices(&client->dev, -1,
- rk808s, ARRAY_SIZE(rk808s),
+ ret = mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+ rk8xx->cells, rk8xx->nr_cells,
NULL, 0, regmap_irq_get_domain(rk8xx->irq_data));
if (ret) {
dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
@@ -246,14 +409,9 @@ static int rk808_remove(struct i2c_client *client)
return 0;
}
-static const struct of_device_id rk808_of_match[] = {
- { .compatible = "rockchip,rk808" },
- { },
-};
-MODULE_DEVICE_TABLE(of, rk808_of_match);
-
static const struct i2c_device_id rk808_ids[] = {
{ "rk808" },
+ { "rk818" },
{ },
};
MODULE_DEVICE_TABLE(i2c, rk808_ids);
@@ -273,4 +431,5 @@ module_i2c_driver(rk808_i2c_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
-MODULE_DESCRIPTION("RK808 PMIC driver");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
+MODULE_DESCRIPTION("RK8XX PMIC driver");
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 117d79f..daba81a 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -1,11 +1,15 @@
/*
- * rk808.h for Rockchip RK808
+ * Register definitions for Rockchip's RK8XX PMIC family
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
@@ -16,8 +20,8 @@
* more details.
*/
-#ifndef __LINUX_REGULATOR_rk808_H
-#define __LINUX_REGULATOR_rk808_H
+#ifndef __LINUX_REGULATOR_RK8XX_H
+#define __LINUX_REGULATOR_RK8XX_H
#include <linux/regulator/machine.h>
#include <linux/regmap.h>
@@ -28,7 +32,7 @@
#define RK808_DCDC1 0 /* (0+RK808_START) */
#define RK808_LDO1 4 /* (4+RK808_START) */
-#define RK808_NUM_REGULATORS 14
+#define RK808_NUM_REGULATORS 14
enum rk808_reg {
RK808_ID_DCDC1,
@@ -115,7 +119,92 @@ enum rk808_reg {
#define RK808_INT_STS_MSK_REG2 0x4f
#define RK808_IO_POL_REG 0x50
-/* IRQ Definitions */
+/* RK818 */
+#define RK818_DCDC1 0
+#define RK818_LDO1 4
+#define RK818_NUM_REGULATORS 17
+
+enum rk818_reg {
+ RK818_ID_DCDC1,
+ RK818_ID_DCDC2,
+ RK818_ID_DCDC3,
+ RK818_ID_DCDC4,
+ RK818_ID_BOOST,
+ RK818_ID_LDO1,
+ RK818_ID_LDO2,
+ RK818_ID_LDO3,
+ RK818_ID_LDO4,
+ RK818_ID_LDO5,
+ RK818_ID_LDO6,
+ RK818_ID_LDO7,
+ RK818_ID_LDO8,
+ RK818_ID_LDO9,
+ RK818_ID_SWITCH,
+ RK818_ID_HDMI_SWITCH,
+ RK818_ID_OTG_SWITCH,
+};
+
+#define RK818_DCDC_EN_REG 0x23
+#define RK818_LDO_EN_REG 0x24
+#define RK818_SLEEP_SET_OFF_REG1 0x25
+#define RK818_SLEEP_SET_OFF_REG2 0x26
+#define RK818_DCDC_UV_STS_REG 0x27
+#define RK818_DCDC_UV_ACT_REG 0x28
+#define RK818_LDO_UV_STS_REG 0x29
+#define RK818_LDO_UV_ACT_REG 0x2a
+#define RK818_DCDC_PG_REG 0x2b
+#define RK818_LDO_PG_REG 0x2c
+#define RK818_VOUT_MON_TDB_REG 0x2d
+#define RK818_BUCK1_CONFIG_REG 0x2e
+#define RK818_BUCK1_ON_VSEL_REG 0x2f
+#define RK818_BUCK1_SLP_VSEL_REG 0x30
+#define RK818_BUCK2_CONFIG_REG 0x32
+#define RK818_BUCK2_ON_VSEL_REG 0x33
+#define RK818_BUCK2_SLP_VSEL_REG 0x34
+#define RK818_BUCK3_CONFIG_REG 0x36
+#define RK818_BUCK4_CONFIG_REG 0x37
+#define RK818_BUCK4_ON_VSEL_REG 0x38
+#define RK818_BUCK4_SLP_VSEL_REG 0x39
+#define RK818_BOOST_CONFIG_REG 0x3a
+#define RK818_LDO1_ON_VSEL_REG 0x3b
+#define RK818_LDO1_SLP_VSEL_REG 0x3c
+#define RK818_LDO2_ON_VSEL_REG 0x3d
+#define RK818_LDO2_SLP_VSEL_REG 0x3e
+#define RK818_LDO3_ON_VSEL_REG 0x3f
+#define RK818_LDO3_SLP_VSEL_REG 0x40
+#define RK818_LDO4_ON_VSEL_REG 0x41
+#define RK818_LDO4_SLP_VSEL_REG 0x42
+#define RK818_LDO5_ON_VSEL_REG 0x43
+#define RK818_LDO5_SLP_VSEL_REG 0x44
+#define RK818_LDO6_ON_VSEL_REG 0x45
+#define RK818_LDO6_SLP_VSEL_REG 0x46
+#define RK818_LDO7_ON_VSEL_REG 0x47
+#define RK818_LDO7_SLP_VSEL_REG 0x48
+#define RK818_LDO8_ON_VSEL_REG 0x49
+#define RK818_LDO8_SLP_VSEL_REG 0x4a
+#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54
+#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55
+#define RK818_DEVCTRL_REG 0x4b
+#define RK818_INT_STS_REG1 0X4c
+#define RK818_INT_STS_MSK_REG1 0x4d
+#define RK818_INT_STS_REG2 0x4e
+#define RK818_INT_STS_MSK_REG2 0x4f
+#define RK818_IO_POL_REG 0x50
+#define RK818_H5V_EN_REG 0x52
+#define RK818_SLEEP_SET_OFF_REG3 0x53
+#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54
+#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55
+#define RK818_BOOST_CTRL_REG 0x56
+#define RK818_DCDC_ILMAX 0x90
+#define RK818_USB_CTRL_REG 0xa1
+
+#define RK818_H5V_EN BIT(0)
+#define RK818_REF_RDY_CTRL BIT(1)
+#define RK818_USB_ILIM_SEL_MASK 0xf
+#define RK818_USB_ILMIN_2000MA 0x7
+#define RK818_USB_CHG_SD_VSEL_MASK 0x70
+
+/* RK808 IRQ Definitions */
#define RK808_IRQ_VOUT_LO 0
#define RK808_IRQ_VB_LO 1
#define RK808_IRQ_PWRON 2
@@ -137,6 +226,43 @@ enum rk808_reg {
#define RK808_IRQ_PLUG_IN_INT_MSK BIT(0)
#define RK808_IRQ_PLUG_OUT_INT_MSK BIT(1)
+/* RK818 IRQ Definitions */
+#define RK818_IRQ_VOUT_LO 0
+#define RK818_IRQ_VB_LO 1
+#define RK818_IRQ_PWRON 2
+#define RK818_IRQ_PWRON_LP 3
+#define RK818_IRQ_HOTDIE 4
+#define RK818_IRQ_RTC_ALARM 5
+#define RK818_IRQ_RTC_PERIOD 6
+#define RK818_IRQ_USB_OV 7
+#define RK818_IRQ_PLUG_IN 8
+#define RK818_IRQ_PLUG_OUT 9
+#define RK818_IRQ_CHG_OK 10
+#define RK818_IRQ_CHG_TE 11
+#define RK818_IRQ_CHG_TS1 12
+#define RK818_IRQ_TS2 13
+#define RK818_IRQ_CHG_CVTLIM 14
+#define RK818_IRQ_DISCHG_ILIM 7
+
+#define RK818_IRQ_VOUT_LO_MSK BIT(0)
+#define RK818_IRQ_VB_LO_MSK BIT(1)
+#define RK818_IRQ_PWRON_MSK BIT(2)
+#define RK818_IRQ_PWRON_LP_MSK BIT(3)
+#define RK818_IRQ_HOTDIE_MSK BIT(4)
+#define RK818_IRQ_RTC_ALARM_MSK BIT(5)
+#define RK818_IRQ_RTC_PERIOD_MSK BIT(6)
+#define RK818_IRQ_USB_OV_MSK BIT(7)
+#define RK818_IRQ_PLUG_IN_MSK BIT(0)
+#define RK818_IRQ_PLUG_OUT_MSK BIT(1)
+#define RK818_IRQ_CHG_OK_MSK BIT(2)
+#define RK818_IRQ_CHG_TE_MSK BIT(3)
+#define RK818_IRQ_CHG_TS1_MSK BIT(4)
+#define RK818_IRQ_TS2_MSK BIT(5)
+#define RK818_IRQ_CHG_CVTLIM_MSK BIT(6)
+#define RK818_IRQ_DISCHG_ILIM_MSK BIT(7)
+
+#define RK818_NUM_IRQ 16
+
#define RK808_VBAT_LOW_2V8 0x00
#define RK808_VBAT_LOW_2V9 0x01
#define RK808_VBAT_LOW_3V0 0x02
@@ -191,9 +317,27 @@ enum {
BOOST_ILMIN_250MA,
};
+enum {
+ RK808_ID,
+ RK818_ID,
+};
+
+struct rk8xx_reg_data {
+ int addr;
+ int mask;
+ int value;
+};
+
struct rk8xx {
- struct i2c_client *i2c;
- struct regmap_irq_chip_data *irq_data;
- struct regmap *regmap;
+ struct i2c_client *i2c;
+ struct regmap_irq_chip_data *irq_data;
+ struct regmap *regmap;
+ long variant;
+ int nr_cells;
+ const struct mfd_cell *cells;
+ const struct regmap_config *regmap_cfg;
+ const struct regmap_irq_chip *regmap_irq_chip;
+ const struct rk8xx_reg_data *pre_init_reg;
+ int nr_pre_init_regs;
};
-#endif /* __LINUX_REGULATOR_rk808_H */
+#endif /* __LINUX_REGULATOR_RK8XX_H */
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [rtc-linux] [PATCH v3 2/8] mfd: RK808: Add RK818 support
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
The RK818 chip is a power management IC for multimedia and handheld
devices. It contains the following components:
- Regulators
- RTC
- Clkout
- battery support
Both chips RK808 and RK818 are using a similar register map.
So we can reuse the RTC and Clkout functionality.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
drivers/mfd/Kconfig | 4 +-
drivers/mfd/rk808.c | 227 +++++++++++++++++++++++++++++++++++++++-------
include/linux/mfd/rk808.h | 162 +++++++++++++++++++++++++++++++--
3 files changed, 348 insertions(+), 45 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index eea61e3..0a5b1c0 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -814,13 +814,13 @@ config MFD_RC5T583
different functionality of the device.
config MFD_RK808
- tristate "Rockchip RK808 Power Management chip"
+ tristate "Rockchip RK808/RK818 Power Management chip"
depends on I2C && OF
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
help
- If you say yes here you get support for the RK808
+ If you say yes here you get support for the RK808 and RK818
Power Management chips.
This driver provides common support for accessing the device
through I2C interface. The device supports multiple sub-devices
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 0386251..8ced05e 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -6,6 +6,10 @@
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
@@ -22,12 +26,7 @@
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/regmap.h>
-
-struct rk808_reg_data {
- int addr;
- int mask;
- int value;
-};
+#include <linux/of_device.h>
static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
{
@@ -57,6 +56,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
return false;
}
+static const struct regmap_config rk818_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RK818_USB_CTRL_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = rk808_is_volatile_reg,
+};
+
static const struct regmap_config rk808_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -83,7 +90,17 @@ static const struct mfd_cell rk808s[] = {
},
};
-static const struct rk808_reg_data pre_init_reg[] = {
+static const struct mfd_cell rk818s[] = {
+ { .name = "rk808-clkout", },
+ { .name = "rk808-regulator", },
+ {
+ .name = "rk808-rtc",
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resources = &rtc_resources[0],
+ },
+};
+
+static const struct rk8xx_reg_data rk808_pre_init_reg[] = {
{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
{ RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
@@ -94,6 +111,22 @@ static const struct rk808_reg_data pre_init_reg[] = {
VB_LO_SEL_3500MV },
};
+static const struct rk8xx_reg_data rk818_pre_init_reg[] = {
+ { RK818_USB_CTRL_REG, RK818_USB_ILIM_SEL_MASK,
+ RK818_USB_ILMIN_2000MA },
+ /* close charger when usb lower then 3.4V */
+ { RK818_USB_CTRL_REG, RK818_USB_CHG_SD_VSEL_MASK, (0x7 << 4) },
+ /* no action when vref */
+ { RK818_H5V_EN_REG, BIT(1), RK818_REF_RDY_CTRL },
+ /* enable HDMI 5V */
+ { RK818_H5V_EN_REG, BIT(0), RK818_H5V_EN },
+ /* improve efficiency */
+ { RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_250MA },
+ { RK818_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_250MA },
+ { RK818_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
+ { RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT | VB_LO_SEL_3500MV },
+};
+
static const struct regmap_irq rk808_irqs[] = {
/* INT_STS */
[RK808_IRQ_VOUT_LO] = {
@@ -136,6 +169,76 @@ static const struct regmap_irq rk808_irqs[] = {
},
};
+static const struct regmap_irq rk818_irqs[] = {
+ /* INT_STS */
+ [RK818_IRQ_VOUT_LO] = {
+ .mask = RK818_IRQ_VOUT_LO_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_VB_LO] = {
+ .mask = RK818_IRQ_VB_LO_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_PWRON] = {
+ .mask = RK818_IRQ_PWRON_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_PWRON_LP] = {
+ .mask = RK818_IRQ_PWRON_LP_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_HOTDIE] = {
+ .mask = RK818_IRQ_HOTDIE_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_RTC_ALARM] = {
+ .mask = RK818_IRQ_RTC_ALARM_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_RTC_PERIOD] = {
+ .mask = RK818_IRQ_RTC_PERIOD_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_USB_OV] = {
+ .mask = RK818_IRQ_USB_OV_MSK,
+ .reg_offset = 0,
+ },
+
+ /* INT_STS2 */
+ [RK818_IRQ_PLUG_IN] = {
+ .mask = RK818_IRQ_PLUG_IN_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_PLUG_OUT] = {
+ .mask = RK818_IRQ_PLUG_OUT_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_OK] = {
+ .mask = RK818_IRQ_CHG_OK_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_TE] = {
+ .mask = RK818_IRQ_CHG_TE_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_TS1] = {
+ .mask = RK818_IRQ_CHG_TS1_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_TS2] = {
+ .mask = RK818_IRQ_TS2_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_CVTLIM] = {
+ .mask = RK818_IRQ_CHG_CVTLIM_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_DISCHG_ILIM] = {
+ .mask = RK818_IRQ_DISCHG_ILIM_MSK,
+ .reg_offset = 1,
+ },
+};
+
static struct regmap_irq_chip rk808_irq_chip = {
.name = "rk808",
.irqs = rk808_irqs,
@@ -148,6 +251,18 @@ static struct regmap_irq_chip rk808_irq_chip = {
.init_ack_masked = true,
};
+static struct regmap_irq_chip rk818_irq_chip = {
+ .name = "rk818",
+ .irqs = rk818_irqs,
+ .num_irqs = ARRAY_SIZE(rk818_irqs),
+ .num_regs = 2,
+ .irq_reg_stride = 2,
+ .status_base = RK818_INT_STS_REG1,
+ .mask_base = RK818_INT_STS_MSK_REG1,
+ .ack_base = RK818_INT_STS_REG1,
+ .init_ack_masked = true,
+};
+
static struct i2c_client *rk808_i2c_client;
static void rk808_device_shutdown(void)
{
@@ -167,6 +282,48 @@ static void rk808_device_shutdown(void)
dev_err(&rk808_i2c_client->dev, "power off error!\n");
}
+static const struct of_device_id rk808_of_match[] = {
+ { .compatible = "rockchip,rk808", .data = (void *) RK808_ID },
+ { .compatible = "rockchip,rk818", .data = (void *) RK818_ID },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rk808_of_match);
+
+static int rk8xx_match_device(struct rk8xx *rk8xx, struct device *dev)
+{
+ const struct of_device_id *of_id;
+
+ of_id = of_match_device(rk808_of_match, dev);
+ if (!of_id) {
+ dev_err(dev, "Unable to match OF ID\n");
+ return -ENODEV;
+ }
+ rk8xx->variant = (long) of_id->data;
+
+ switch (rk8xx->variant) {
+ case RK808_ID:
+ rk8xx->nr_cells = ARRAY_SIZE(rk808s);
+ rk8xx->cells = rk808s;
+ rk8xx->regmap_cfg = &rk808_regmap_config;
+ rk8xx->regmap_irq_chip = &rk808_irq_chip;
+ rk8xx->pre_init_reg = rk808_pre_init_reg;
+ rk8xx->nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
+ break;
+ case RK818_ID:
+ rk8xx->nr_cells = ARRAY_SIZE(rk818s);
+ rk8xx->cells = rk818s;
+ rk8xx->regmap_cfg = &rk818_regmap_config;
+ rk8xx->regmap_irq_chip = &rk818_irq_chip;
+ rk8xx->pre_init_reg = rk818_pre_init_reg;
+ rk8xx->nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
+ break;
+ default:
+ dev_err(dev, "unsupported RK8XX ID %lu\n", rk8xx->variant);
+ return -EINVAL;
+ }
+
+ return 0;
+}
static int rk808_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -176,45 +333,51 @@ static int rk808_probe(struct i2c_client *client,
int ret;
int i;
- if (!client->irq) {
- dev_err(&client->dev, "No interrupt support, no core IRQ\n");
- return -EINVAL;
- }
-
rk8xx = devm_kzalloc(&client->dev, sizeof(*rk8xx), GFP_KERNEL);
if (!rk8xx)
return -ENOMEM;
- rk8xx->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
+ ret = rk8xx_match_device(rk8xx, &client->dev);
+ if (ret)
+ return ret;
+
+ rk8xx->i2c = client;
+ i2c_set_clientdata(client, rk8xx);
+
+ rk8xx->regmap = devm_regmap_init_i2c(client, rk8xx->regmap_cfg);
if (IS_ERR(rk8xx->regmap)) {
dev_err(&client->dev, "regmap initialization failed\n");
return PTR_ERR(rk8xx->regmap);
}
- for (i = 0; i < ARRAY_SIZE(pre_init_reg); i++) {
- ret = regmap_update_bits(rk8xx->regmap, pre_init_reg[i].addr,
- pre_init_reg[i].mask,
- pre_init_reg[i].value);
- if (ret) {
- dev_err(&client->dev,
- "0x%x write err\n", pre_init_reg[i].addr);
- return ret;
- }
+ if (!client->irq) {
+ dev_err(&client->dev, "No interrupt support, no core IRQ\n");
+ return -EINVAL;
}
ret = regmap_add_irq_chip(rk8xx->regmap, client->irq,
IRQF_ONESHOT, -1,
- &rk808_irq_chip, &rk8xx->irq_data);
+ rk8xx->regmap_irq_chip, &rk8xx->irq_data);
if (ret) {
dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
return ret;
}
- rk8xx->i2c = client;
- i2c_set_clientdata(client, rk8xx);
+ for (i = 0; i < rk8xx->nr_pre_init_regs; i++) {
+ ret = regmap_update_bits(rk8xx->regmap,
+ rk8xx->pre_init_reg[i].addr,
+ rk8xx->pre_init_reg[i].mask,
+ rk8xx->pre_init_reg[i].value);
+ if (ret) {
+ dev_err(&client->dev,
+ "0x%x write err\n",
+ rk8xx->pre_init_reg[i].addr);
+ return ret;
+ }
+ }
- ret = mfd_add_devices(&client->dev, -1,
- rk808s, ARRAY_SIZE(rk808s),
+ ret = mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+ rk8xx->cells, rk8xx->nr_cells,
NULL, 0, regmap_irq_get_domain(rk8xx->irq_data));
if (ret) {
dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
@@ -246,14 +409,9 @@ static int rk808_remove(struct i2c_client *client)
return 0;
}
-static const struct of_device_id rk808_of_match[] = {
- { .compatible = "rockchip,rk808" },
- { },
-};
-MODULE_DEVICE_TABLE(of, rk808_of_match);
-
static const struct i2c_device_id rk808_ids[] = {
{ "rk808" },
+ { "rk818" },
{ },
};
MODULE_DEVICE_TABLE(i2c, rk808_ids);
@@ -273,4 +431,5 @@ module_i2c_driver(rk808_i2c_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
-MODULE_DESCRIPTION("RK808 PMIC driver");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
+MODULE_DESCRIPTION("RK8XX PMIC driver");
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 117d79f..daba81a 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -1,11 +1,15 @@
/*
- * rk808.h for Rockchip RK808
+ * Register definitions for Rockchip's RK8XX PMIC family
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
@@ -16,8 +20,8 @@
* more details.
*/
-#ifndef __LINUX_REGULATOR_rk808_H
-#define __LINUX_REGULATOR_rk808_H
+#ifndef __LINUX_REGULATOR_RK8XX_H
+#define __LINUX_REGULATOR_RK8XX_H
#include <linux/regulator/machine.h>
#include <linux/regmap.h>
@@ -28,7 +32,7 @@
#define RK808_DCDC1 0 /* (0+RK808_START) */
#define RK808_LDO1 4 /* (4+RK808_START) */
-#define RK808_NUM_REGULATORS 14
+#define RK808_NUM_REGULATORS 14
enum rk808_reg {
RK808_ID_DCDC1,
@@ -115,7 +119,92 @@ enum rk808_reg {
#define RK808_INT_STS_MSK_REG2 0x4f
#define RK808_IO_POL_REG 0x50
-/* IRQ Definitions */
+/* RK818 */
+#define RK818_DCDC1 0
+#define RK818_LDO1 4
+#define RK818_NUM_REGULATORS 17
+
+enum rk818_reg {
+ RK818_ID_DCDC1,
+ RK818_ID_DCDC2,
+ RK818_ID_DCDC3,
+ RK818_ID_DCDC4,
+ RK818_ID_BOOST,
+ RK818_ID_LDO1,
+ RK818_ID_LDO2,
+ RK818_ID_LDO3,
+ RK818_ID_LDO4,
+ RK818_ID_LDO5,
+ RK818_ID_LDO6,
+ RK818_ID_LDO7,
+ RK818_ID_LDO8,
+ RK818_ID_LDO9,
+ RK818_ID_SWITCH,
+ RK818_ID_HDMI_SWITCH,
+ RK818_ID_OTG_SWITCH,
+};
+
+#define RK818_DCDC_EN_REG 0x23
+#define RK818_LDO_EN_REG 0x24
+#define RK818_SLEEP_SET_OFF_REG1 0x25
+#define RK818_SLEEP_SET_OFF_REG2 0x26
+#define RK818_DCDC_UV_STS_REG 0x27
+#define RK818_DCDC_UV_ACT_REG 0x28
+#define RK818_LDO_UV_STS_REG 0x29
+#define RK818_LDO_UV_ACT_REG 0x2a
+#define RK818_DCDC_PG_REG 0x2b
+#define RK818_LDO_PG_REG 0x2c
+#define RK818_VOUT_MON_TDB_REG 0x2d
+#define RK818_BUCK1_CONFIG_REG 0x2e
+#define RK818_BUCK1_ON_VSEL_REG 0x2f
+#define RK818_BUCK1_SLP_VSEL_REG 0x30
+#define RK818_BUCK2_CONFIG_REG 0x32
+#define RK818_BUCK2_ON_VSEL_REG 0x33
+#define RK818_BUCK2_SLP_VSEL_REG 0x34
+#define RK818_BUCK3_CONFIG_REG 0x36
+#define RK818_BUCK4_CONFIG_REG 0x37
+#define RK818_BUCK4_ON_VSEL_REG 0x38
+#define RK818_BUCK4_SLP_VSEL_REG 0x39
+#define RK818_BOOST_CONFIG_REG 0x3a
+#define RK818_LDO1_ON_VSEL_REG 0x3b
+#define RK818_LDO1_SLP_VSEL_REG 0x3c
+#define RK818_LDO2_ON_VSEL_REG 0x3d
+#define RK818_LDO2_SLP_VSEL_REG 0x3e
+#define RK818_LDO3_ON_VSEL_REG 0x3f
+#define RK818_LDO3_SLP_VSEL_REG 0x40
+#define RK818_LDO4_ON_VSEL_REG 0x41
+#define RK818_LDO4_SLP_VSEL_REG 0x42
+#define RK818_LDO5_ON_VSEL_REG 0x43
+#define RK818_LDO5_SLP_VSEL_REG 0x44
+#define RK818_LDO6_ON_VSEL_REG 0x45
+#define RK818_LDO6_SLP_VSEL_REG 0x46
+#define RK818_LDO7_ON_VSEL_REG 0x47
+#define RK818_LDO7_SLP_VSEL_REG 0x48
+#define RK818_LDO8_ON_VSEL_REG 0x49
+#define RK818_LDO8_SLP_VSEL_REG 0x4a
+#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54
+#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55
+#define RK818_DEVCTRL_REG 0x4b
+#define RK818_INT_STS_REG1 0X4c
+#define RK818_INT_STS_MSK_REG1 0x4d
+#define RK818_INT_STS_REG2 0x4e
+#define RK818_INT_STS_MSK_REG2 0x4f
+#define RK818_IO_POL_REG 0x50
+#define RK818_H5V_EN_REG 0x52
+#define RK818_SLEEP_SET_OFF_REG3 0x53
+#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54
+#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55
+#define RK818_BOOST_CTRL_REG 0x56
+#define RK818_DCDC_ILMAX 0x90
+#define RK818_USB_CTRL_REG 0xa1
+
+#define RK818_H5V_EN BIT(0)
+#define RK818_REF_RDY_CTRL BIT(1)
+#define RK818_USB_ILIM_SEL_MASK 0xf
+#define RK818_USB_ILMIN_2000MA 0x7
+#define RK818_USB_CHG_SD_VSEL_MASK 0x70
+
+/* RK808 IRQ Definitions */
#define RK808_IRQ_VOUT_LO 0
#define RK808_IRQ_VB_LO 1
#define RK808_IRQ_PWRON 2
@@ -137,6 +226,43 @@ enum rk808_reg {
#define RK808_IRQ_PLUG_IN_INT_MSK BIT(0)
#define RK808_IRQ_PLUG_OUT_INT_MSK BIT(1)
+/* RK818 IRQ Definitions */
+#define RK818_IRQ_VOUT_LO 0
+#define RK818_IRQ_VB_LO 1
+#define RK818_IRQ_PWRON 2
+#define RK818_IRQ_PWRON_LP 3
+#define RK818_IRQ_HOTDIE 4
+#define RK818_IRQ_RTC_ALARM 5
+#define RK818_IRQ_RTC_PERIOD 6
+#define RK818_IRQ_USB_OV 7
+#define RK818_IRQ_PLUG_IN 8
+#define RK818_IRQ_PLUG_OUT 9
+#define RK818_IRQ_CHG_OK 10
+#define RK818_IRQ_CHG_TE 11
+#define RK818_IRQ_CHG_TS1 12
+#define RK818_IRQ_TS2 13
+#define RK818_IRQ_CHG_CVTLIM 14
+#define RK818_IRQ_DISCHG_ILIM 7
+
+#define RK818_IRQ_VOUT_LO_MSK BIT(0)
+#define RK818_IRQ_VB_LO_MSK BIT(1)
+#define RK818_IRQ_PWRON_MSK BIT(2)
+#define RK818_IRQ_PWRON_LP_MSK BIT(3)
+#define RK818_IRQ_HOTDIE_MSK BIT(4)
+#define RK818_IRQ_RTC_ALARM_MSK BIT(5)
+#define RK818_IRQ_RTC_PERIOD_MSK BIT(6)
+#define RK818_IRQ_USB_OV_MSK BIT(7)
+#define RK818_IRQ_PLUG_IN_MSK BIT(0)
+#define RK818_IRQ_PLUG_OUT_MSK BIT(1)
+#define RK818_IRQ_CHG_OK_MSK BIT(2)
+#define RK818_IRQ_CHG_TE_MSK BIT(3)
+#define RK818_IRQ_CHG_TS1_MSK BIT(4)
+#define RK818_IRQ_TS2_MSK BIT(5)
+#define RK818_IRQ_CHG_CVTLIM_MSK BIT(6)
+#define RK818_IRQ_DISCHG_ILIM_MSK BIT(7)
+
+#define RK818_NUM_IRQ 16
+
#define RK808_VBAT_LOW_2V8 0x00
#define RK808_VBAT_LOW_2V9 0x01
#define RK808_VBAT_LOW_3V0 0x02
@@ -191,9 +317,27 @@ enum {
BOOST_ILMIN_250MA,
};
+enum {
+ RK808_ID,
+ RK818_ID,
+};
+
+struct rk8xx_reg_data {
+ int addr;
+ int mask;
+ int value;
+};
+
struct rk8xx {
- struct i2c_client *i2c;
- struct regmap_irq_chip_data *irq_data;
- struct regmap *regmap;
+ struct i2c_client *i2c;
+ struct regmap_irq_chip_data *irq_data;
+ struct regmap *regmap;
+ long variant;
+ int nr_cells;
+ const struct mfd_cell *cells;
+ const struct regmap_config *regmap_cfg;
+ const struct regmap_irq_chip *regmap_irq_chip;
+ const struct rk8xx_reg_data *pre_init_reg;
+ int nr_pre_init_regs;
};
-#endif /* __LINUX_REGULATOR_rk808_H */
+#endif /* __LINUX_REGULATOR_RK8XX_H */
--
1.9.1
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v3 2/8] mfd: RK808: Add RK818 support
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: mark.rutland-5wv7dgnIgG8, a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
pawel.moll-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
mturquette-rdvid1DuHRBWk0Htik3J/w, sboyd-sgV2jX0FEOL9JmXXK+q4OQ,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
dianders-F7+t8E8rja9g9hUCZPvPmw, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
broonie-DgEjT+Ai2ygdnm+yROfE0A, galak-sgV2jX0FEOL9JmXXK+q4OQ,
zyw-TNX95d0MmH7DzftRWevZcw, lee.jones-QSEj5FYQhm4dnm+yROfE0A
The RK818 chip is a power management IC for multimedia and handheld
devices. It contains the following components:
- Regulators
- RTC
- Clkout
- battery support
Both chips RK808 and RK818 are using a similar register map.
So we can reuse the RTC and Clkout functionality.
Signed-off-by: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
---
drivers/mfd/Kconfig | 4 +-
drivers/mfd/rk808.c | 227 +++++++++++++++++++++++++++++++++++++++-------
include/linux/mfd/rk808.h | 162 +++++++++++++++++++++++++++++++--
3 files changed, 348 insertions(+), 45 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index eea61e3..0a5b1c0 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -814,13 +814,13 @@ config MFD_RC5T583
different functionality of the device.
config MFD_RK808
- tristate "Rockchip RK808 Power Management chip"
+ tristate "Rockchip RK808/RK818 Power Management chip"
depends on I2C && OF
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
help
- If you say yes here you get support for the RK808
+ If you say yes here you get support for the RK808 and RK818
Power Management chips.
This driver provides common support for accessing the device
through I2C interface. The device supports multiple sub-devices
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 0386251..8ced05e 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -6,6 +6,10 @@
* Author: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
* Author: Zhang Qing <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
@@ -22,12 +26,7 @@
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/regmap.h>
-
-struct rk808_reg_data {
- int addr;
- int mask;
- int value;
-};
+#include <linux/of_device.h>
static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
{
@@ -57,6 +56,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
return false;
}
+static const struct regmap_config rk818_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RK818_USB_CTRL_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = rk808_is_volatile_reg,
+};
+
static const struct regmap_config rk808_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -83,7 +90,17 @@ static const struct mfd_cell rk808s[] = {
},
};
-static const struct rk808_reg_data pre_init_reg[] = {
+static const struct mfd_cell rk818s[] = {
+ { .name = "rk808-clkout", },
+ { .name = "rk808-regulator", },
+ {
+ .name = "rk808-rtc",
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resources = &rtc_resources[0],
+ },
+};
+
+static const struct rk8xx_reg_data rk808_pre_init_reg[] = {
{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
{ RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
@@ -94,6 +111,22 @@ static const struct rk808_reg_data pre_init_reg[] = {
VB_LO_SEL_3500MV },
};
+static const struct rk8xx_reg_data rk818_pre_init_reg[] = {
+ { RK818_USB_CTRL_REG, RK818_USB_ILIM_SEL_MASK,
+ RK818_USB_ILMIN_2000MA },
+ /* close charger when usb lower then 3.4V */
+ { RK818_USB_CTRL_REG, RK818_USB_CHG_SD_VSEL_MASK, (0x7 << 4) },
+ /* no action when vref */
+ { RK818_H5V_EN_REG, BIT(1), RK818_REF_RDY_CTRL },
+ /* enable HDMI 5V */
+ { RK818_H5V_EN_REG, BIT(0), RK818_H5V_EN },
+ /* improve efficiency */
+ { RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_250MA },
+ { RK818_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_250MA },
+ { RK818_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA },
+ { RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT | VB_LO_SEL_3500MV },
+};
+
static const struct regmap_irq rk808_irqs[] = {
/* INT_STS */
[RK808_IRQ_VOUT_LO] = {
@@ -136,6 +169,76 @@ static const struct regmap_irq rk808_irqs[] = {
},
};
+static const struct regmap_irq rk818_irqs[] = {
+ /* INT_STS */
+ [RK818_IRQ_VOUT_LO] = {
+ .mask = RK818_IRQ_VOUT_LO_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_VB_LO] = {
+ .mask = RK818_IRQ_VB_LO_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_PWRON] = {
+ .mask = RK818_IRQ_PWRON_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_PWRON_LP] = {
+ .mask = RK818_IRQ_PWRON_LP_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_HOTDIE] = {
+ .mask = RK818_IRQ_HOTDIE_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_RTC_ALARM] = {
+ .mask = RK818_IRQ_RTC_ALARM_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_RTC_PERIOD] = {
+ .mask = RK818_IRQ_RTC_PERIOD_MSK,
+ .reg_offset = 0,
+ },
+ [RK818_IRQ_USB_OV] = {
+ .mask = RK818_IRQ_USB_OV_MSK,
+ .reg_offset = 0,
+ },
+
+ /* INT_STS2 */
+ [RK818_IRQ_PLUG_IN] = {
+ .mask = RK818_IRQ_PLUG_IN_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_PLUG_OUT] = {
+ .mask = RK818_IRQ_PLUG_OUT_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_OK] = {
+ .mask = RK818_IRQ_CHG_OK_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_TE] = {
+ .mask = RK818_IRQ_CHG_TE_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_TS1] = {
+ .mask = RK818_IRQ_CHG_TS1_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_TS2] = {
+ .mask = RK818_IRQ_TS2_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_CHG_CVTLIM] = {
+ .mask = RK818_IRQ_CHG_CVTLIM_MSK,
+ .reg_offset = 1,
+ },
+ [RK818_IRQ_DISCHG_ILIM] = {
+ .mask = RK818_IRQ_DISCHG_ILIM_MSK,
+ .reg_offset = 1,
+ },
+};
+
static struct regmap_irq_chip rk808_irq_chip = {
.name = "rk808",
.irqs = rk808_irqs,
@@ -148,6 +251,18 @@ static struct regmap_irq_chip rk808_irq_chip = {
.init_ack_masked = true,
};
+static struct regmap_irq_chip rk818_irq_chip = {
+ .name = "rk818",
+ .irqs = rk818_irqs,
+ .num_irqs = ARRAY_SIZE(rk818_irqs),
+ .num_regs = 2,
+ .irq_reg_stride = 2,
+ .status_base = RK818_INT_STS_REG1,
+ .mask_base = RK818_INT_STS_MSK_REG1,
+ .ack_base = RK818_INT_STS_REG1,
+ .init_ack_masked = true,
+};
+
static struct i2c_client *rk808_i2c_client;
static void rk808_device_shutdown(void)
{
@@ -167,6 +282,48 @@ static void rk808_device_shutdown(void)
dev_err(&rk808_i2c_client->dev, "power off error!\n");
}
+static const struct of_device_id rk808_of_match[] = {
+ { .compatible = "rockchip,rk808", .data = (void *) RK808_ID },
+ { .compatible = "rockchip,rk818", .data = (void *) RK818_ID },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rk808_of_match);
+
+static int rk8xx_match_device(struct rk8xx *rk8xx, struct device *dev)
+{
+ const struct of_device_id *of_id;
+
+ of_id = of_match_device(rk808_of_match, dev);
+ if (!of_id) {
+ dev_err(dev, "Unable to match OF ID\n");
+ return -ENODEV;
+ }
+ rk8xx->variant = (long) of_id->data;
+
+ switch (rk8xx->variant) {
+ case RK808_ID:
+ rk8xx->nr_cells = ARRAY_SIZE(rk808s);
+ rk8xx->cells = rk808s;
+ rk8xx->regmap_cfg = &rk808_regmap_config;
+ rk8xx->regmap_irq_chip = &rk808_irq_chip;
+ rk8xx->pre_init_reg = rk808_pre_init_reg;
+ rk8xx->nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
+ break;
+ case RK818_ID:
+ rk8xx->nr_cells = ARRAY_SIZE(rk818s);
+ rk8xx->cells = rk818s;
+ rk8xx->regmap_cfg = &rk818_regmap_config;
+ rk8xx->regmap_irq_chip = &rk818_irq_chip;
+ rk8xx->pre_init_reg = rk818_pre_init_reg;
+ rk8xx->nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
+ break;
+ default:
+ dev_err(dev, "unsupported RK8XX ID %lu\n", rk8xx->variant);
+ return -EINVAL;
+ }
+
+ return 0;
+}
static int rk808_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -176,45 +333,51 @@ static int rk808_probe(struct i2c_client *client,
int ret;
int i;
- if (!client->irq) {
- dev_err(&client->dev, "No interrupt support, no core IRQ\n");
- return -EINVAL;
- }
-
rk8xx = devm_kzalloc(&client->dev, sizeof(*rk8xx), GFP_KERNEL);
if (!rk8xx)
return -ENOMEM;
- rk8xx->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
+ ret = rk8xx_match_device(rk8xx, &client->dev);
+ if (ret)
+ return ret;
+
+ rk8xx->i2c = client;
+ i2c_set_clientdata(client, rk8xx);
+
+ rk8xx->regmap = devm_regmap_init_i2c(client, rk8xx->regmap_cfg);
if (IS_ERR(rk8xx->regmap)) {
dev_err(&client->dev, "regmap initialization failed\n");
return PTR_ERR(rk8xx->regmap);
}
- for (i = 0; i < ARRAY_SIZE(pre_init_reg); i++) {
- ret = regmap_update_bits(rk8xx->regmap, pre_init_reg[i].addr,
- pre_init_reg[i].mask,
- pre_init_reg[i].value);
- if (ret) {
- dev_err(&client->dev,
- "0x%x write err\n", pre_init_reg[i].addr);
- return ret;
- }
+ if (!client->irq) {
+ dev_err(&client->dev, "No interrupt support, no core IRQ\n");
+ return -EINVAL;
}
ret = regmap_add_irq_chip(rk8xx->regmap, client->irq,
IRQF_ONESHOT, -1,
- &rk808_irq_chip, &rk8xx->irq_data);
+ rk8xx->regmap_irq_chip, &rk8xx->irq_data);
if (ret) {
dev_err(&client->dev, "Failed to add irq_chip %d\n", ret);
return ret;
}
- rk8xx->i2c = client;
- i2c_set_clientdata(client, rk8xx);
+ for (i = 0; i < rk8xx->nr_pre_init_regs; i++) {
+ ret = regmap_update_bits(rk8xx->regmap,
+ rk8xx->pre_init_reg[i].addr,
+ rk8xx->pre_init_reg[i].mask,
+ rk8xx->pre_init_reg[i].value);
+ if (ret) {
+ dev_err(&client->dev,
+ "0x%x write err\n",
+ rk8xx->pre_init_reg[i].addr);
+ return ret;
+ }
+ }
- ret = mfd_add_devices(&client->dev, -1,
- rk808s, ARRAY_SIZE(rk808s),
+ ret = mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+ rk8xx->cells, rk8xx->nr_cells,
NULL, 0, regmap_irq_get_domain(rk8xx->irq_data));
if (ret) {
dev_err(&client->dev, "failed to add MFD devices %d\n", ret);
@@ -246,14 +409,9 @@ static int rk808_remove(struct i2c_client *client)
return 0;
}
-static const struct of_device_id rk808_of_match[] = {
- { .compatible = "rockchip,rk808" },
- { },
-};
-MODULE_DEVICE_TABLE(of, rk808_of_match);
-
static const struct i2c_device_id rk808_ids[] = {
{ "rk808" },
+ { "rk818" },
{ },
};
MODULE_DEVICE_TABLE(i2c, rk808_ids);
@@ -273,4 +431,5 @@ module_i2c_driver(rk808_i2c_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>");
MODULE_AUTHOR("Zhang Qing <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>");
-MODULE_DESCRIPTION("RK808 PMIC driver");
+MODULE_AUTHOR("Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>");
+MODULE_DESCRIPTION("RK8XX PMIC driver");
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 117d79f..daba81a 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -1,11 +1,15 @@
/*
- * rk808.h for Rockchip RK808
+ * Register definitions for Rockchip's RK8XX PMIC family
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
* Author: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
* Author: Zhang Qing <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
@@ -16,8 +20,8 @@
* more details.
*/
-#ifndef __LINUX_REGULATOR_rk808_H
-#define __LINUX_REGULATOR_rk808_H
+#ifndef __LINUX_REGULATOR_RK8XX_H
+#define __LINUX_REGULATOR_RK8XX_H
#include <linux/regulator/machine.h>
#include <linux/regmap.h>
@@ -28,7 +32,7 @@
#define RK808_DCDC1 0 /* (0+RK808_START) */
#define RK808_LDO1 4 /* (4+RK808_START) */
-#define RK808_NUM_REGULATORS 14
+#define RK808_NUM_REGULATORS 14
enum rk808_reg {
RK808_ID_DCDC1,
@@ -115,7 +119,92 @@ enum rk808_reg {
#define RK808_INT_STS_MSK_REG2 0x4f
#define RK808_IO_POL_REG 0x50
-/* IRQ Definitions */
+/* RK818 */
+#define RK818_DCDC1 0
+#define RK818_LDO1 4
+#define RK818_NUM_REGULATORS 17
+
+enum rk818_reg {
+ RK818_ID_DCDC1,
+ RK818_ID_DCDC2,
+ RK818_ID_DCDC3,
+ RK818_ID_DCDC4,
+ RK818_ID_BOOST,
+ RK818_ID_LDO1,
+ RK818_ID_LDO2,
+ RK818_ID_LDO3,
+ RK818_ID_LDO4,
+ RK818_ID_LDO5,
+ RK818_ID_LDO6,
+ RK818_ID_LDO7,
+ RK818_ID_LDO8,
+ RK818_ID_LDO9,
+ RK818_ID_SWITCH,
+ RK818_ID_HDMI_SWITCH,
+ RK818_ID_OTG_SWITCH,
+};
+
+#define RK818_DCDC_EN_REG 0x23
+#define RK818_LDO_EN_REG 0x24
+#define RK818_SLEEP_SET_OFF_REG1 0x25
+#define RK818_SLEEP_SET_OFF_REG2 0x26
+#define RK818_DCDC_UV_STS_REG 0x27
+#define RK818_DCDC_UV_ACT_REG 0x28
+#define RK818_LDO_UV_STS_REG 0x29
+#define RK818_LDO_UV_ACT_REG 0x2a
+#define RK818_DCDC_PG_REG 0x2b
+#define RK818_LDO_PG_REG 0x2c
+#define RK818_VOUT_MON_TDB_REG 0x2d
+#define RK818_BUCK1_CONFIG_REG 0x2e
+#define RK818_BUCK1_ON_VSEL_REG 0x2f
+#define RK818_BUCK1_SLP_VSEL_REG 0x30
+#define RK818_BUCK2_CONFIG_REG 0x32
+#define RK818_BUCK2_ON_VSEL_REG 0x33
+#define RK818_BUCK2_SLP_VSEL_REG 0x34
+#define RK818_BUCK3_CONFIG_REG 0x36
+#define RK818_BUCK4_CONFIG_REG 0x37
+#define RK818_BUCK4_ON_VSEL_REG 0x38
+#define RK818_BUCK4_SLP_VSEL_REG 0x39
+#define RK818_BOOST_CONFIG_REG 0x3a
+#define RK818_LDO1_ON_VSEL_REG 0x3b
+#define RK818_LDO1_SLP_VSEL_REG 0x3c
+#define RK818_LDO2_ON_VSEL_REG 0x3d
+#define RK818_LDO2_SLP_VSEL_REG 0x3e
+#define RK818_LDO3_ON_VSEL_REG 0x3f
+#define RK818_LDO3_SLP_VSEL_REG 0x40
+#define RK818_LDO4_ON_VSEL_REG 0x41
+#define RK818_LDO4_SLP_VSEL_REG 0x42
+#define RK818_LDO5_ON_VSEL_REG 0x43
+#define RK818_LDO5_SLP_VSEL_REG 0x44
+#define RK818_LDO6_ON_VSEL_REG 0x45
+#define RK818_LDO6_SLP_VSEL_REG 0x46
+#define RK818_LDO7_ON_VSEL_REG 0x47
+#define RK818_LDO7_SLP_VSEL_REG 0x48
+#define RK818_LDO8_ON_VSEL_REG 0x49
+#define RK818_LDO8_SLP_VSEL_REG 0x4a
+#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54
+#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55
+#define RK818_DEVCTRL_REG 0x4b
+#define RK818_INT_STS_REG1 0X4c
+#define RK818_INT_STS_MSK_REG1 0x4d
+#define RK818_INT_STS_REG2 0x4e
+#define RK818_INT_STS_MSK_REG2 0x4f
+#define RK818_IO_POL_REG 0x50
+#define RK818_H5V_EN_REG 0x52
+#define RK818_SLEEP_SET_OFF_REG3 0x53
+#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54
+#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55
+#define RK818_BOOST_CTRL_REG 0x56
+#define RK818_DCDC_ILMAX 0x90
+#define RK818_USB_CTRL_REG 0xa1
+
+#define RK818_H5V_EN BIT(0)
+#define RK818_REF_RDY_CTRL BIT(1)
+#define RK818_USB_ILIM_SEL_MASK 0xf
+#define RK818_USB_ILMIN_2000MA 0x7
+#define RK818_USB_CHG_SD_VSEL_MASK 0x70
+
+/* RK808 IRQ Definitions */
#define RK808_IRQ_VOUT_LO 0
#define RK808_IRQ_VB_LO 1
#define RK808_IRQ_PWRON 2
@@ -137,6 +226,43 @@ enum rk808_reg {
#define RK808_IRQ_PLUG_IN_INT_MSK BIT(0)
#define RK808_IRQ_PLUG_OUT_INT_MSK BIT(1)
+/* RK818 IRQ Definitions */
+#define RK818_IRQ_VOUT_LO 0
+#define RK818_IRQ_VB_LO 1
+#define RK818_IRQ_PWRON 2
+#define RK818_IRQ_PWRON_LP 3
+#define RK818_IRQ_HOTDIE 4
+#define RK818_IRQ_RTC_ALARM 5
+#define RK818_IRQ_RTC_PERIOD 6
+#define RK818_IRQ_USB_OV 7
+#define RK818_IRQ_PLUG_IN 8
+#define RK818_IRQ_PLUG_OUT 9
+#define RK818_IRQ_CHG_OK 10
+#define RK818_IRQ_CHG_TE 11
+#define RK818_IRQ_CHG_TS1 12
+#define RK818_IRQ_TS2 13
+#define RK818_IRQ_CHG_CVTLIM 14
+#define RK818_IRQ_DISCHG_ILIM 7
+
+#define RK818_IRQ_VOUT_LO_MSK BIT(0)
+#define RK818_IRQ_VB_LO_MSK BIT(1)
+#define RK818_IRQ_PWRON_MSK BIT(2)
+#define RK818_IRQ_PWRON_LP_MSK BIT(3)
+#define RK818_IRQ_HOTDIE_MSK BIT(4)
+#define RK818_IRQ_RTC_ALARM_MSK BIT(5)
+#define RK818_IRQ_RTC_PERIOD_MSK BIT(6)
+#define RK818_IRQ_USB_OV_MSK BIT(7)
+#define RK818_IRQ_PLUG_IN_MSK BIT(0)
+#define RK818_IRQ_PLUG_OUT_MSK BIT(1)
+#define RK818_IRQ_CHG_OK_MSK BIT(2)
+#define RK818_IRQ_CHG_TE_MSK BIT(3)
+#define RK818_IRQ_CHG_TS1_MSK BIT(4)
+#define RK818_IRQ_TS2_MSK BIT(5)
+#define RK818_IRQ_CHG_CVTLIM_MSK BIT(6)
+#define RK818_IRQ_DISCHG_ILIM_MSK BIT(7)
+
+#define RK818_NUM_IRQ 16
+
#define RK808_VBAT_LOW_2V8 0x00
#define RK808_VBAT_LOW_2V9 0x01
#define RK808_VBAT_LOW_3V0 0x02
@@ -191,9 +317,27 @@ enum {
BOOST_ILMIN_250MA,
};
+enum {
+ RK808_ID,
+ RK818_ID,
+};
+
+struct rk8xx_reg_data {
+ int addr;
+ int mask;
+ int value;
+};
+
struct rk8xx {
- struct i2c_client *i2c;
- struct regmap_irq_chip_data *irq_data;
- struct regmap *regmap;
+ struct i2c_client *i2c;
+ struct regmap_irq_chip_data *irq_data;
+ struct regmap *regmap;
+ long variant;
+ int nr_cells;
+ const struct mfd_cell *cells;
+ const struct regmap_config *regmap_cfg;
+ const struct regmap_irq_chip *regmap_irq_chip;
+ const struct rk8xx_reg_data *pre_init_reg;
+ int nr_pre_init_regs;
};
-#endif /* __LINUX_REGULATOR_rk808_H */
+#endif /* __LINUX_REGULATOR_RK8XX_H */
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v3 3/8] regulator: rk808: remove linear range definitions with a single range
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
(?)
@ 2016-04-25 13:20 ` Wadim Egorov
-1 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
The driver was using only linear ranges. Now we remove linear range
definitions with a single range. So we have to add an ops struct for
ranges and adjust all other ops functions accordingly.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
drivers/regulator/rk808-regulator.c | 90 +++++++++++++++++++++----------------
1 file changed, 51 insertions(+), 39 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 37aaba9..32cf1b5 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -66,27 +66,11 @@ static const int rk808_buck_config_regs[] = {
RK808_BUCK4_CONFIG_REG,
};
-static const struct regulator_linear_range rk808_buck_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(712500, 0, 63, 12500),
-};
-
-static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 15, 100000),
-};
-
-static const struct regulator_linear_range rk808_ldo_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 16, 100000),
-};
-
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
-static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
-};
-
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -242,6 +226,21 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
+ int sel = regulator_map_voltage_linear(rdev, uv, uv);
+
+ if (sel < 0)
+ return -EINVAL;
+
+ reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->vsel_mask,
+ sel);
+}
+
+static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
+{
+ unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
if (sel < 0)
@@ -277,8 +276,8 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
}
static struct regulator_ops rk808_buck1_2_ops = {
- .list_voltage = regulator_list_voltage_linear_range,
- .map_voltage = regulator_map_voltage_linear_range,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
@@ -292,6 +291,19 @@ static struct regulator_ops rk808_buck1_2_ops = {
};
static struct regulator_ops rk808_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
+};
+
+static struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -299,7 +311,7 @@ static struct regulator_ops rk808_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
- .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
@@ -319,9 +331,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -333,9 +345,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -357,9 +369,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 16,
- .linear_ranges = rk808_buck4_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck4_voltage_ranges),
.vsel_reg = RK808_BUCK4_ON_VSEL_REG,
.vsel_mask = RK808_BUCK4_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -371,9 +383,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO1,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO1_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -386,9 +398,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO2,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO2_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -416,9 +428,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO4_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -431,9 +443,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO5,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO5_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -446,9 +458,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO6,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO6_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -461,9 +473,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO7,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO7_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -476,9 +488,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO8,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO8_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [rtc-linux] [PATCH v3 3/8] regulator: rk808: remove linear range definitions with a single range
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
The driver was using only linear ranges. Now we remove linear range
definitions with a single range. So we have to add an ops struct for
ranges and adjust all other ops functions accordingly.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
drivers/regulator/rk808-regulator.c | 90 +++++++++++++++++++++----------------
1 file changed, 51 insertions(+), 39 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 37aaba9..32cf1b5 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -66,27 +66,11 @@ static const int rk808_buck_config_regs[] = {
RK808_BUCK4_CONFIG_REG,
};
-static const struct regulator_linear_range rk808_buck_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(712500, 0, 63, 12500),
-};
-
-static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 15, 100000),
-};
-
-static const struct regulator_linear_range rk808_ldo_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 16, 100000),
-};
-
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
-static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
-};
-
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -242,6 +226,21 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
+ int sel = regulator_map_voltage_linear(rdev, uv, uv);
+
+ if (sel < 0)
+ return -EINVAL;
+
+ reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->vsel_mask,
+ sel);
+}
+
+static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
+{
+ unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
if (sel < 0)
@@ -277,8 +276,8 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
}
static struct regulator_ops rk808_buck1_2_ops = {
- .list_voltage = regulator_list_voltage_linear_range,
- .map_voltage = regulator_map_voltage_linear_range,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
@@ -292,6 +291,19 @@ static struct regulator_ops rk808_buck1_2_ops = {
};
static struct regulator_ops rk808_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
+};
+
+static struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -299,7 +311,7 @@ static struct regulator_ops rk808_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
- .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
@@ -319,9 +331,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -333,9 +345,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -357,9 +369,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 16,
- .linear_ranges = rk808_buck4_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck4_voltage_ranges),
.vsel_reg = RK808_BUCK4_ON_VSEL_REG,
.vsel_mask = RK808_BUCK4_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -371,9 +383,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO1,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO1_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -386,9 +398,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO2,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO2_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -416,9 +428,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO4_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -431,9 +443,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO5,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO5_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -446,9 +458,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO6,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO6_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -461,9 +473,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO7,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO7_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -476,9 +488,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO8,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO8_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
--
1.9.1
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v3 3/8] regulator: rk808: remove linear range definitions with a single range
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: mark.rutland-5wv7dgnIgG8, a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
pawel.moll-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
mturquette-rdvid1DuHRBWk0Htik3J/w, sboyd-sgV2jX0FEOL9JmXXK+q4OQ,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
dianders-F7+t8E8rja9g9hUCZPvPmw, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
broonie-DgEjT+Ai2ygdnm+yROfE0A, galak-sgV2jX0FEOL9JmXXK+q4OQ,
zyw-TNX95d0MmH7DzftRWevZcw, lee.jones-QSEj5FYQhm4dnm+yROfE0A
The driver was using only linear ranges. Now we remove linear range
definitions with a single range. So we have to add an ops struct for
ranges and adjust all other ops functions accordingly.
Signed-off-by: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
---
drivers/regulator/rk808-regulator.c | 90 +++++++++++++++++++++----------------
1 file changed, 51 insertions(+), 39 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 37aaba9..32cf1b5 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -66,27 +66,11 @@ static const int rk808_buck_config_regs[] = {
RK808_BUCK4_CONFIG_REG,
};
-static const struct regulator_linear_range rk808_buck_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(712500, 0, 63, 12500),
-};
-
-static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 15, 100000),
-};
-
-static const struct regulator_linear_range rk808_ldo_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 16, 100000),
-};
-
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
-static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
-};
-
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -242,6 +226,21 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
+ int sel = regulator_map_voltage_linear(rdev, uv, uv);
+
+ if (sel < 0)
+ return -EINVAL;
+
+ reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->vsel_mask,
+ sel);
+}
+
+static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
+{
+ unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
if (sel < 0)
@@ -277,8 +276,8 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
}
static struct regulator_ops rk808_buck1_2_ops = {
- .list_voltage = regulator_list_voltage_linear_range,
- .map_voltage = regulator_map_voltage_linear_range,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
@@ -292,6 +291,19 @@ static struct regulator_ops rk808_buck1_2_ops = {
};
static struct regulator_ops rk808_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
+};
+
+static struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -299,7 +311,7 @@ static struct regulator_ops rk808_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
- .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
@@ -319,9 +331,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -333,9 +345,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -357,9 +369,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 16,
- .linear_ranges = rk808_buck4_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck4_voltage_ranges),
.vsel_reg = RK808_BUCK4_ON_VSEL_REG,
.vsel_mask = RK808_BUCK4_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -371,9 +383,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO1,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO1_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -386,9 +398,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO2,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO2_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -416,9 +428,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO4_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -431,9 +443,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO5,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO5_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -446,9 +458,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO6,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO6_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -461,9 +473,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO7,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO7_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -476,9 +488,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO8,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO8_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
(?)
@ 2016-04-25 13:20 ` Wadim Egorov
-1 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
A common simplified DT parsing code for regulators was introduced in
commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
method")
While at it also added RK8XX_DESC and RK8XX_DESC_SWITCH macros for the
regulator_desc struct initialization. This just makes the driver more compact.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
drivers/regulator/rk808-regulator.c | 252 ++++++++++++------------------------
1 file changed, 80 insertions(+), 172 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 32cf1b5..b30c906 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -55,6 +55,42 @@
/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8
+#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _etime) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
+ .owner = THIS_MODULE, \
+ .min_uV = (_min) * 1000, \
+ .uV_step = (_step) * 1000, \
+ .vsel_reg = (_vreg), \
+ .vsel_mask = (_vmask), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .enable_time = (_etime), \
+ .ops = &rk808_reg_ops, \
+ }
+
+#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .owner = THIS_MODULE, \
+ .ops = &rk808_switch_ops \
+ }
+
+
struct rk808_regulator_data {
struct gpio_desc *dvs_gpio[2];
};
@@ -328,6 +364,8 @@ static const struct regulator_desc rk808_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
@@ -342,6 +380,8 @@ static const struct regulator_desc rk808_reg[] = {
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
@@ -356,6 +396,8 @@ static const struct regulator_desc rk808_reg[] = {
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
@@ -363,55 +405,23 @@ static const struct regulator_desc rk808_reg[] = {
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
- }, {
- .name = "DCDC_REG4",
- .supply_name = "vcc4",
- .id = RK808_ID_DCDC4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 16,
- .vsel_reg = RK808_BUCK4_ON_VSEL_REG,
- .vsel_mask = RK808_BUCK4_VSEL_MASK,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(3),
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG1",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO1,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO1_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(0),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG2",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO2,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO2_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(1),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
+ },
+ RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
+ RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
+ RK808_DCDC_EN_REG, BIT(3), 0),
+ RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+ RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(0), 400),
+ RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+ RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(1), 400),
+ {
.name = "LDO_REG3",
.supply_name = "vcc7",
+ .of_match = of_match_ptr("LDO_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_LDO3,
- .ops = &rk808_reg_ops,
+ .ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
@@ -422,117 +432,26 @@ static const struct regulator_desc rk808_reg[] = {
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
- }, {
- .name = "LDO_REG4",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO4_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(3),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG5",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO5,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO5_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(4),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG6",
- .supply_name = "vcc10",
- .id = RK808_ID_LDO6,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 800000,
- .uV_step = 100000,
- .n_voltages = 18,
- .vsel_reg = RK808_LDO6_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(5),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG7",
- .supply_name = "vcc7",
- .id = RK808_ID_LDO7,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 800000,
- .uV_step = 100000,
- .n_voltages = 18,
- .vsel_reg = RK808_LDO7_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(6),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG8",
- .supply_name = "vcc11",
- .id = RK808_ID_LDO8,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO8_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(7),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG1",
- .supply_name = "vcc8",
- .id = RK808_ID_SWITCH1,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(5),
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG2",
- .supply_name = "vcc12",
- .id = RK808_ID_SWITCH2,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(6),
- .owner = THIS_MODULE,
},
-};
-
-static struct of_regulator_match rk808_reg_matches[] = {
- [RK808_ID_DCDC1] = { .name = "DCDC_REG1" },
- [RK808_ID_DCDC2] = { .name = "DCDC_REG2" },
- [RK808_ID_DCDC3] = { .name = "DCDC_REG3" },
- [RK808_ID_DCDC4] = { .name = "DCDC_REG4" },
- [RK808_ID_LDO1] = { .name = "LDO_REG1" },
- [RK808_ID_LDO2] = { .name = "LDO_REG2" },
- [RK808_ID_LDO3] = { .name = "LDO_REG3" },
- [RK808_ID_LDO4] = { .name = "LDO_REG4" },
- [RK808_ID_LDO5] = { .name = "LDO_REG5" },
- [RK808_ID_LDO6] = { .name = "LDO_REG6" },
- [RK808_ID_LDO7] = { .name = "LDO_REG7" },
- [RK808_ID_LDO8] = { .name = "LDO_REG8" },
- [RK808_ID_SWITCH1] = { .name = "SWITCH_REG1" },
- [RK808_ID_SWITCH2] = { .name = "SWITCH_REG2" },
+ RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
+ RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(3), 400),
+ RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
+ RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(4), 400),
+ RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
+ RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(5), 400),
+ RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+ RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(6), 400),
+ RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
+ RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(7), 400),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
+ RK808_DCDC_EN_REG, BIT(5)),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
+ RK808_DCDC_EN_REG, BIT(6)),
};
static int rk808_regulator_dt_parse_pdata(struct device *dev,
@@ -541,17 +460,12 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct rk808_regulator_data *pdata)
{
struct device_node *np;
- int tmp, ret, i;
+ int tmp, ret = 0, i;
np = of_get_child_by_name(client_dev->of_node, "regulators");
if (!np)
return -ENXIO;
- ret = of_regulator_match(dev, np, rk808_reg_matches,
- RK808_NUM_REGULATORS);
- if (ret < 0)
- goto dt_parse_end;
-
for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
pdata->dvs_gpio[i] =
devm_gpiod_get_index_optional(client_dev, "dvs", i,
@@ -598,18 +512,12 @@ static int rk808_regulator_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pdata);
+ config.dev = &client->dev;
+ config.driver_data = pdata;
+ config.regmap = rk8xx->regmap;
+
/* Instantiate the regulators */
for (i = 0; i < RK808_NUM_REGULATORS; i++) {
- if (!rk808_reg_matches[i].init_data ||
- !rk808_reg_matches[i].of_node)
- continue;
-
- config.dev = &client->dev;
- config.driver_data = pdata;
- config.regmap = rk8xx->regmap;
- config.of_node = rk808_reg_matches[i].of_node;
- config.init_data = rk808_reg_matches[i].init_data;
-
rk808_rdev = devm_regulator_register(&pdev->dev,
&rk808_reg[i], &config);
if (IS_ERR(rk808_rdev)) {
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [rtc-linux] [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
A common simplified DT parsing code for regulators was introduced in
commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
method")
While at it also added RK8XX_DESC and RK8XX_DESC_SWITCH macros for the
regulator_desc struct initialization. This just makes the driver more compact.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
drivers/regulator/rk808-regulator.c | 252 ++++++++++++------------------------
1 file changed, 80 insertions(+), 172 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 32cf1b5..b30c906 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -55,6 +55,42 @@
/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8
+#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _etime) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
+ .owner = THIS_MODULE, \
+ .min_uV = (_min) * 1000, \
+ .uV_step = (_step) * 1000, \
+ .vsel_reg = (_vreg), \
+ .vsel_mask = (_vmask), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .enable_time = (_etime), \
+ .ops = &rk808_reg_ops, \
+ }
+
+#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .owner = THIS_MODULE, \
+ .ops = &rk808_switch_ops \
+ }
+
+
struct rk808_regulator_data {
struct gpio_desc *dvs_gpio[2];
};
@@ -328,6 +364,8 @@ static const struct regulator_desc rk808_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
@@ -342,6 +380,8 @@ static const struct regulator_desc rk808_reg[] = {
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
@@ -356,6 +396,8 @@ static const struct regulator_desc rk808_reg[] = {
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
@@ -363,55 +405,23 @@ static const struct regulator_desc rk808_reg[] = {
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
- }, {
- .name = "DCDC_REG4",
- .supply_name = "vcc4",
- .id = RK808_ID_DCDC4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 16,
- .vsel_reg = RK808_BUCK4_ON_VSEL_REG,
- .vsel_mask = RK808_BUCK4_VSEL_MASK,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(3),
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG1",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO1,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO1_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(0),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG2",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO2,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO2_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(1),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
+ },
+ RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
+ RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
+ RK808_DCDC_EN_REG, BIT(3), 0),
+ RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+ RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(0), 400),
+ RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+ RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(1), 400),
+ {
.name = "LDO_REG3",
.supply_name = "vcc7",
+ .of_match = of_match_ptr("LDO_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_LDO3,
- .ops = &rk808_reg_ops,
+ .ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
@@ -422,117 +432,26 @@ static const struct regulator_desc rk808_reg[] = {
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
- }, {
- .name = "LDO_REG4",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO4_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(3),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG5",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO5,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO5_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(4),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG6",
- .supply_name = "vcc10",
- .id = RK808_ID_LDO6,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 800000,
- .uV_step = 100000,
- .n_voltages = 18,
- .vsel_reg = RK808_LDO6_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(5),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG7",
- .supply_name = "vcc7",
- .id = RK808_ID_LDO7,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 800000,
- .uV_step = 100000,
- .n_voltages = 18,
- .vsel_reg = RK808_LDO7_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(6),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG8",
- .supply_name = "vcc11",
- .id = RK808_ID_LDO8,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO8_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(7),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG1",
- .supply_name = "vcc8",
- .id = RK808_ID_SWITCH1,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(5),
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG2",
- .supply_name = "vcc12",
- .id = RK808_ID_SWITCH2,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(6),
- .owner = THIS_MODULE,
},
-};
-
-static struct of_regulator_match rk808_reg_matches[] = {
- [RK808_ID_DCDC1] = { .name = "DCDC_REG1" },
- [RK808_ID_DCDC2] = { .name = "DCDC_REG2" },
- [RK808_ID_DCDC3] = { .name = "DCDC_REG3" },
- [RK808_ID_DCDC4] = { .name = "DCDC_REG4" },
- [RK808_ID_LDO1] = { .name = "LDO_REG1" },
- [RK808_ID_LDO2] = { .name = "LDO_REG2" },
- [RK808_ID_LDO3] = { .name = "LDO_REG3" },
- [RK808_ID_LDO4] = { .name = "LDO_REG4" },
- [RK808_ID_LDO5] = { .name = "LDO_REG5" },
- [RK808_ID_LDO6] = { .name = "LDO_REG6" },
- [RK808_ID_LDO7] = { .name = "LDO_REG7" },
- [RK808_ID_LDO8] = { .name = "LDO_REG8" },
- [RK808_ID_SWITCH1] = { .name = "SWITCH_REG1" },
- [RK808_ID_SWITCH2] = { .name = "SWITCH_REG2" },
+ RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
+ RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(3), 400),
+ RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
+ RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(4), 400),
+ RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
+ RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(5), 400),
+ RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+ RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(6), 400),
+ RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
+ RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(7), 400),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
+ RK808_DCDC_EN_REG, BIT(5)),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
+ RK808_DCDC_EN_REG, BIT(6)),
};
static int rk808_regulator_dt_parse_pdata(struct device *dev,
@@ -541,17 +460,12 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct rk808_regulator_data *pdata)
{
struct device_node *np;
- int tmp, ret, i;
+ int tmp, ret = 0, i;
np = of_get_child_by_name(client_dev->of_node, "regulators");
if (!np)
return -ENXIO;
- ret = of_regulator_match(dev, np, rk808_reg_matches,
- RK808_NUM_REGULATORS);
- if (ret < 0)
- goto dt_parse_end;
-
for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
pdata->dvs_gpio[i] =
devm_gpiod_get_index_optional(client_dev, "dvs", i,
@@ -598,18 +512,12 @@ static int rk808_regulator_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pdata);
+ config.dev = &client->dev;
+ config.driver_data = pdata;
+ config.regmap = rk8xx->regmap;
+
/* Instantiate the regulators */
for (i = 0; i < RK808_NUM_REGULATORS; i++) {
- if (!rk808_reg_matches[i].init_data ||
- !rk808_reg_matches[i].of_node)
- continue;
-
- config.dev = &client->dev;
- config.driver_data = pdata;
- config.regmap = rk8xx->regmap;
- config.of_node = rk808_reg_matches[i].of_node;
- config.init_data = rk808_reg_matches[i].init_data;
-
rk808_rdev = devm_regulator_register(&pdev->dev,
&rk808_reg[i], &config);
if (IS_ERR(rk808_rdev)) {
--
1.9.1
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: mark.rutland-5wv7dgnIgG8, a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
pawel.moll-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
mturquette-rdvid1DuHRBWk0Htik3J/w, sboyd-sgV2jX0FEOL9JmXXK+q4OQ,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
dianders-F7+t8E8rja9g9hUCZPvPmw, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
broonie-DgEjT+Ai2ygdnm+yROfE0A, galak-sgV2jX0FEOL9JmXXK+q4OQ,
zyw-TNX95d0MmH7DzftRWevZcw, lee.jones-QSEj5FYQhm4dnm+yROfE0A
A common simplified DT parsing code for regulators was introduced in
commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
method")
While at it also added RK8XX_DESC and RK8XX_DESC_SWITCH macros for the
regulator_desc struct initialization. This just makes the driver more compact.
Signed-off-by: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
---
drivers/regulator/rk808-regulator.c | 252 ++++++++++++------------------------
1 file changed, 80 insertions(+), 172 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 32cf1b5..b30c906 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -55,6 +55,42 @@
/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8
+#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _etime) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
+ .owner = THIS_MODULE, \
+ .min_uV = (_min) * 1000, \
+ .uV_step = (_step) * 1000, \
+ .vsel_reg = (_vreg), \
+ .vsel_mask = (_vmask), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .enable_time = (_etime), \
+ .ops = &rk808_reg_ops, \
+ }
+
+#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
+ [_id] = { \
+ .name = (_match), \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .owner = THIS_MODULE, \
+ .ops = &rk808_switch_ops \
+ }
+
+
struct rk808_regulator_data {
struct gpio_desc *dvs_gpio[2];
};
@@ -328,6 +364,8 @@ static const struct regulator_desc rk808_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
@@ -342,6 +380,8 @@ static const struct regulator_desc rk808_reg[] = {
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
@@ -356,6 +396,8 @@ static const struct regulator_desc rk808_reg[] = {
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
@@ -363,55 +405,23 @@ static const struct regulator_desc rk808_reg[] = {
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
- }, {
- .name = "DCDC_REG4",
- .supply_name = "vcc4",
- .id = RK808_ID_DCDC4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 16,
- .vsel_reg = RK808_BUCK4_ON_VSEL_REG,
- .vsel_mask = RK808_BUCK4_VSEL_MASK,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(3),
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG1",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO1,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO1_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(0),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG2",
- .supply_name = "vcc6",
- .id = RK808_ID_LDO2,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO2_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(1),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
+ },
+ RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
+ RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
+ RK808_DCDC_EN_REG, BIT(3), 0),
+ RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+ RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(0), 400),
+ RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+ RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(1), 400),
+ {
.name = "LDO_REG3",
.supply_name = "vcc7",
+ .of_match = of_match_ptr("LDO_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_LDO3,
- .ops = &rk808_reg_ops,
+ .ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
@@ -422,117 +432,26 @@ static const struct regulator_desc rk808_reg[] = {
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
- }, {
- .name = "LDO_REG4",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO4,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO4_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(3),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG5",
- .supply_name = "vcc9",
- .id = RK808_ID_LDO5,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO5_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(4),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG6",
- .supply_name = "vcc10",
- .id = RK808_ID_LDO6,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 800000,
- .uV_step = 100000,
- .n_voltages = 18,
- .vsel_reg = RK808_LDO6_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(5),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG7",
- .supply_name = "vcc7",
- .id = RK808_ID_LDO7,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 800000,
- .uV_step = 100000,
- .n_voltages = 18,
- .vsel_reg = RK808_LDO7_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(6),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "LDO_REG8",
- .supply_name = "vcc11",
- .id = RK808_ID_LDO8,
- .ops = &rk808_reg_ops,
- .type = REGULATOR_VOLTAGE,
- .min_uV = 1800000,
- .uV_step = 100000,
- .n_voltages = 17,
- .vsel_reg = RK808_LDO8_ON_VSEL_REG,
- .vsel_mask = RK808_LDO_VSEL_MASK,
- .enable_reg = RK808_LDO_EN_REG,
- .enable_mask = BIT(7),
- .enable_time = 400,
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG1",
- .supply_name = "vcc8",
- .id = RK808_ID_SWITCH1,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(5),
- .owner = THIS_MODULE,
- }, {
- .name = "SWITCH_REG2",
- .supply_name = "vcc12",
- .id = RK808_ID_SWITCH2,
- .ops = &rk808_switch_ops,
- .type = REGULATOR_VOLTAGE,
- .enable_reg = RK808_DCDC_EN_REG,
- .enable_mask = BIT(6),
- .owner = THIS_MODULE,
},
-};
-
-static struct of_regulator_match rk808_reg_matches[] = {
- [RK808_ID_DCDC1] = { .name = "DCDC_REG1" },
- [RK808_ID_DCDC2] = { .name = "DCDC_REG2" },
- [RK808_ID_DCDC3] = { .name = "DCDC_REG3" },
- [RK808_ID_DCDC4] = { .name = "DCDC_REG4" },
- [RK808_ID_LDO1] = { .name = "LDO_REG1" },
- [RK808_ID_LDO2] = { .name = "LDO_REG2" },
- [RK808_ID_LDO3] = { .name = "LDO_REG3" },
- [RK808_ID_LDO4] = { .name = "LDO_REG4" },
- [RK808_ID_LDO5] = { .name = "LDO_REG5" },
- [RK808_ID_LDO6] = { .name = "LDO_REG6" },
- [RK808_ID_LDO7] = { .name = "LDO_REG7" },
- [RK808_ID_LDO8] = { .name = "LDO_REG8" },
- [RK808_ID_SWITCH1] = { .name = "SWITCH_REG1" },
- [RK808_ID_SWITCH2] = { .name = "SWITCH_REG2" },
+ RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
+ RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(3), 400),
+ RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
+ RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(4), 400),
+ RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
+ RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(5), 400),
+ RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+ RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(6), 400),
+ RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
+ RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+ BIT(7), 400),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
+ RK808_DCDC_EN_REG, BIT(5)),
+ RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
+ RK808_DCDC_EN_REG, BIT(6)),
};
static int rk808_regulator_dt_parse_pdata(struct device *dev,
@@ -541,17 +460,12 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct rk808_regulator_data *pdata)
{
struct device_node *np;
- int tmp, ret, i;
+ int tmp, ret = 0, i;
np = of_get_child_by_name(client_dev->of_node, "regulators");
if (!np)
return -ENXIO;
- ret = of_regulator_match(dev, np, rk808_reg_matches,
- RK808_NUM_REGULATORS);
- if (ret < 0)
- goto dt_parse_end;
-
for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
pdata->dvs_gpio[i] =
devm_gpiod_get_index_optional(client_dev, "dvs", i,
@@ -598,18 +512,12 @@ static int rk808_regulator_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pdata);
+ config.dev = &client->dev;
+ config.driver_data = pdata;
+ config.regmap = rk8xx->regmap;
+
/* Instantiate the regulators */
for (i = 0; i < RK808_NUM_REGULATORS; i++) {
- if (!rk808_reg_matches[i].init_data ||
- !rk808_reg_matches[i].of_node)
- continue;
-
- config.dev = &client->dev;
- config.driver_data = pdata;
- config.regmap = rk8xx->regmap;
- config.of_node = rk808_reg_matches[i].of_node;
- config.init_data = rk808_reg_matches[i].init_data;
-
rk808_rdev = devm_regulator_register(&pdev->dev,
&rk808_reg[i], &config);
if (IS_ERR(rk808_rdev)) {
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v3 5/8] regulator: rk808: Add regulator driver for RK818
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
@ 2016-04-25 13:20 ` Wadim Egorov
-1 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
Add support for the rk818 regulator. The regulator module consists
of 4 DCDCs, 9 LDOs, 1 switch and 1 BOOST converter which is used to
power OTG and HDMI5V.
The output voltages are configurable and are meant to supply power
to the main processor and other components.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Mark Brown <broonie@kernel.org>
---
Changes since v2:
- Added Acked-by
---
drivers/regulator/Kconfig | 4 +-
drivers/regulator/rk808-regulator.c | 141 ++++++++++++++++++++++++++++++++++--
2 files changed, 137 insertions(+), 8 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c77dc08..0efbcbf 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -609,11 +609,11 @@ config REGULATOR_RC5T583
outputs which can be controlled by i2c communication.
config REGULATOR_RK808
- tristate "Rockchip RK808 Power regulators"
+ tristate "Rockchip RK808/RK818 Power regulators"
depends on MFD_RK808
help
Select this option to enable the power regulator of ROCKCHIP
- PMIC RK808.
+ PMIC RK808 and RK818.
This driver supports the control of different power rails of device
through regulator interface. The device supports multiple DCDC/LDO
outputs which can be controlled by i2c communication.
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index b30c906..db4c8ca 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -6,6 +6,10 @@
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
@@ -32,6 +36,12 @@
#define RK808_BUCK4_VSEL_MASK 0xf
#define RK808_LDO_VSEL_MASK 0x1f
+#define RK818_BUCK_VSEL_MASK 0x3f
+#define RK818_BUCK4_VSEL_MASK 0x1f
+#define RK818_LDO_VSEL_MASK 0x1f
+#define RK818_LDO3_ON_VSEL_MASK 0xf
+#define RK818_BOOST_ON_VSEL_MASK 0xe0
+
/* Ramp rate definitions for buck1 / buck2 only */
#define RK808_RAMP_RATE_OFFSET 3
#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
@@ -454,6 +464,108 @@ static const struct regulator_desc rk808_reg[] = {
RK808_DCDC_EN_REG, BIT(6)),
};
+static const struct regulator_desc rk818_reg[] = {
+ {
+ .name = "DCDC_REG1",
+ .supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_DCDC1,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
+ .n_voltages = 64,
+ .vsel_reg = RK818_BUCK1_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(0),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "DCDC_REG2",
+ .supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_DCDC2,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
+ .n_voltages = 64,
+ .vsel_reg = RK818_BUCK2_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(1),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "DCDC_REG3",
+ .supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_DCDC3,
+ .ops = &rk808_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 1,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(2),
+ .owner = THIS_MODULE,
+ },
+ RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
+ RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
+ RK818_DCDC_EN_REG, BIT(3), 0),
+ RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
+ RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
+ RK818_DCDC_EN_REG, BIT(4), 0),
+ RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+ RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(0), 400),
+ RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+ RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(1), 400),
+ {
+ .name = "LDO_REG3",
+ .supply_name = "vcc7",
+ .of_match = of_match_ptr("LDO_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_LDO3,
+ .ops = &rk808_reg_ops_ranges,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 16,
+ .linear_ranges = rk808_ldo3_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
+ .vsel_reg = RK818_LDO3_ON_VSEL_REG,
+ .vsel_mask = RK818_LDO3_ON_VSEL_MASK,
+ .enable_reg = RK818_LDO_EN_REG,
+ .enable_mask = BIT(2),
+ .enable_time = 400,
+ .owner = THIS_MODULE,
+ },
+ RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
+ RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(3), 400),
+ RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
+ RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(4), 400),
+ RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
+ RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(5), 400),
+ RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+ RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(6), 400),
+ RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
+ RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(7), 400),
+ RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
+ RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK818_DCDC_EN_REG, BIT(5), 400),
+ RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
+ RK818_DCDC_EN_REG, BIT(6)),
+ RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
+ RK818_H5V_EN_REG, BIT(0)),
+ RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
+ RK818_DCDC_EN_REG, BIT(7)),
+};
+
static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct device *client_dev,
struct regmap *map,
@@ -499,7 +611,8 @@ static int rk808_regulator_probe(struct platform_device *pdev)
struct regulator_config config = {};
struct regulator_dev *rk808_rdev;
struct rk808_regulator_data *pdata;
- int ret, i;
+ const struct regulator_desc *regulators;
+ int ret, i, nregulators;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
@@ -512,14 +625,29 @@ static int rk808_regulator_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pdata);
+ switch (rk8xx->variant) {
+ case RK808_ID:
+ regulators = rk808_reg;
+ nregulators = RK808_NUM_REGULATORS;
+ break;
+ case RK818_ID:
+ regulators = rk818_reg;
+ nregulators = RK818_NUM_REGULATORS;
+ break;
+ default:
+ dev_err(&client->dev, "unsupported RK8XX ID %lu\n",
+ rk8xx->variant);
+ return -EINVAL;
+ }
+
config.dev = &client->dev;
config.driver_data = pdata;
config.regmap = rk8xx->regmap;
/* Instantiate the regulators */
- for (i = 0; i < RK808_NUM_REGULATORS; i++) {
+ for (i = 0; i < nregulators; i++) {
rk808_rdev = devm_regulator_register(&pdev->dev,
- &rk808_reg[i], &config);
+ ®ulators[i], &config);
if (IS_ERR(rk808_rdev)) {
dev_err(&client->dev,
"failed to register %d regulator\n", i);
@@ -540,8 +668,9 @@ static struct platform_driver rk808_regulator_driver = {
module_platform_driver(rk808_regulator_driver);
-MODULE_DESCRIPTION("regulator driver for the rk808 series PMICs");
-MODULE_AUTHOR("Chris Zhong<zyw@rock-chips.com>");
-MODULE_AUTHOR("Zhang Qing<zhangqing@rock-chips.com>");
+MODULE_DESCRIPTION("regulator driver for the rk8xx series PMICs");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:rk808-regulator");
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [rtc-linux] [PATCH v3 5/8] regulator: rk808: Add regulator driver for RK818
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
Add support for the rk818 regulator. The regulator module consists
of 4 DCDCs, 9 LDOs, 1 switch and 1 BOOST converter which is used to
power OTG and HDMI5V.
The output voltages are configurable and are meant to supply power
to the main processor and other components.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Mark Brown <broonie@kernel.org>
---
Changes since v2:
- Added Acked-by
---
drivers/regulator/Kconfig | 4 +-
drivers/regulator/rk808-regulator.c | 141 ++++++++++++++++++++++++++++++++++--
2 files changed, 137 insertions(+), 8 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c77dc08..0efbcbf 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -609,11 +609,11 @@ config REGULATOR_RC5T583
outputs which can be controlled by i2c communication.
config REGULATOR_RK808
- tristate "Rockchip RK808 Power regulators"
+ tristate "Rockchip RK808/RK818 Power regulators"
depends on MFD_RK808
help
Select this option to enable the power regulator of ROCKCHIP
- PMIC RK808.
+ PMIC RK808 and RK818.
This driver supports the control of different power rails of device
through regulator interface. The device supports multiple DCDC/LDO
outputs which can be controlled by i2c communication.
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index b30c906..db4c8ca 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -6,6 +6,10 @@
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
@@ -32,6 +36,12 @@
#define RK808_BUCK4_VSEL_MASK 0xf
#define RK808_LDO_VSEL_MASK 0x1f
+#define RK818_BUCK_VSEL_MASK 0x3f
+#define RK818_BUCK4_VSEL_MASK 0x1f
+#define RK818_LDO_VSEL_MASK 0x1f
+#define RK818_LDO3_ON_VSEL_MASK 0xf
+#define RK818_BOOST_ON_VSEL_MASK 0xe0
+
/* Ramp rate definitions for buck1 / buck2 only */
#define RK808_RAMP_RATE_OFFSET 3
#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
@@ -454,6 +464,108 @@ static const struct regulator_desc rk808_reg[] = {
RK808_DCDC_EN_REG, BIT(6)),
};
+static const struct regulator_desc rk818_reg[] = {
+ {
+ .name = "DCDC_REG1",
+ .supply_name = "vcc1",
+ .of_match = of_match_ptr("DCDC_REG1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_DCDC1,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
+ .n_voltages = 64,
+ .vsel_reg = RK818_BUCK1_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(0),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "DCDC_REG2",
+ .supply_name = "vcc2",
+ .of_match = of_match_ptr("DCDC_REG2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_DCDC2,
+ .ops = &rk808_reg_ops,
+ .type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
+ .n_voltages = 64,
+ .vsel_reg = RK818_BUCK2_ON_VSEL_REG,
+ .vsel_mask = RK818_BUCK_VSEL_MASK,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(1),
+ .owner = THIS_MODULE,
+ }, {
+ .name = "DCDC_REG3",
+ .supply_name = "vcc3",
+ .of_match = of_match_ptr("DCDC_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_DCDC3,
+ .ops = &rk808_switch_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 1,
+ .enable_reg = RK818_DCDC_EN_REG,
+ .enable_mask = BIT(2),
+ .owner = THIS_MODULE,
+ },
+ RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
+ RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
+ RK818_DCDC_EN_REG, BIT(3), 0),
+ RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
+ RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
+ RK818_DCDC_EN_REG, BIT(4), 0),
+ RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+ RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(0), 400),
+ RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+ RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(1), 400),
+ {
+ .name = "LDO_REG3",
+ .supply_name = "vcc7",
+ .of_match = of_match_ptr("LDO_REG3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = RK818_ID_LDO3,
+ .ops = &rk808_reg_ops_ranges,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 16,
+ .linear_ranges = rk808_ldo3_voltage_ranges,
+ .n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
+ .vsel_reg = RK818_LDO3_ON_VSEL_REG,
+ .vsel_mask = RK818_LDO3_ON_VSEL_MASK,
+ .enable_reg = RK818_LDO_EN_REG,
+ .enable_mask = BIT(2),
+ .enable_time = 400,
+ .owner = THIS_MODULE,
+ },
+ RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
+ RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(3), 400),
+ RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
+ RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(4), 400),
+ RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
+ RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(5), 400),
+ RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+ RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(6), 400),
+ RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
+ RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
+ BIT(7), 400),
+ RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
+ RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
+ RK818_DCDC_EN_REG, BIT(5), 400),
+ RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
+ RK818_DCDC_EN_REG, BIT(6)),
+ RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
+ RK818_H5V_EN_REG, BIT(0)),
+ RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
+ RK818_DCDC_EN_REG, BIT(7)),
+};
+
static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct device *client_dev,
struct regmap *map,
@@ -499,7 +611,8 @@ static int rk808_regulator_probe(struct platform_device *pdev)
struct regulator_config config = {};
struct regulator_dev *rk808_rdev;
struct rk808_regulator_data *pdata;
- int ret, i;
+ const struct regulator_desc *regulators;
+ int ret, i, nregulators;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
@@ -512,14 +625,29 @@ static int rk808_regulator_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pdata);
+ switch (rk8xx->variant) {
+ case RK808_ID:
+ regulators = rk808_reg;
+ nregulators = RK808_NUM_REGULATORS;
+ break;
+ case RK818_ID:
+ regulators = rk818_reg;
+ nregulators = RK818_NUM_REGULATORS;
+ break;
+ default:
+ dev_err(&client->dev, "unsupported RK8XX ID %lu\n",
+ rk8xx->variant);
+ return -EINVAL;
+ }
+
config.dev = &client->dev;
config.driver_data = pdata;
config.regmap = rk8xx->regmap;
/* Instantiate the regulators */
- for (i = 0; i < RK808_NUM_REGULATORS; i++) {
+ for (i = 0; i < nregulators; i++) {
rk808_rdev = devm_regulator_register(&pdev->dev,
- &rk808_reg[i], &config);
+ ®ulators[i], &config);
if (IS_ERR(rk808_rdev)) {
dev_err(&client->dev,
"failed to register %d regulator\n", i);
@@ -540,8 +668,9 @@ static struct platform_driver rk808_regulator_driver = {
module_platform_driver(rk808_regulator_driver);
-MODULE_DESCRIPTION("regulator driver for the rk808 series PMICs");
-MODULE_AUTHOR("Chris Zhong<zyw@rock-chips.com>");
-MODULE_AUTHOR("Zhang Qing<zhangqing@rock-chips.com>");
+MODULE_DESCRIPTION("regulator driver for the rk8xx series PMICs");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:rk808-regulator");
--
1.9.1
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v3 6/8] mfd: dt-bindings: Add RK818 device tree bindings document
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
(?)
@ 2016-04-25 13:20 ` Wadim Egorov
-1 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
Add device tree bindings documentation for Rockchip's RK818 PMIC.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes since v2:
- Added Acked-by
---
Documentation/devicetree/bindings/mfd/rk808.txt | 37 +++++++++++++++++++++++--
1 file changed, 34 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 4ca6aab..9636ae8 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -1,7 +1,11 @@
-RK808 Power Management Integrated Circuit
+RK8XX Power Management Integrated Circuit
+
+The rk8xx family current members:
+rk808
+rk818
Required properties:
-- compatible: "rockchip,rk808"
+- compatible: "rockchip,rk808", "rockchip,rk818"
- reg: I2C slave address
- interrupt-parent: The parent interrupt controller.
- interrupts: the interrupt outputs of the controller.
@@ -13,6 +17,8 @@ Optional properties:
default output clock name
- rockchip,system-power-controller: Telling whether or not this pmic is controlling
the system power.
+
+Optional RK808 properties:
- vcc1-supply: The input supply for DCDC_REG1
- vcc2-supply: The input supply for DCDC_REG2
- vcc3-supply: The input supply for DCDC_REG3
@@ -29,7 +35,20 @@ Optional properties:
the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
very quickly with no slow ramp time.
-Regulators: All the regulators of RK808 to be instantiated shall be
+Optional RK818 properties:
+- vcc1-supply: The input supply for DCDC_REG1
+- vcc2-supply: The input supply for DCDC_REG2
+- vcc3-supply: The input supply for DCDC_REG3
+- vcc4-supply: The input supply for DCDC_REG4
+- boost-supply: The input supply for DCDC_BOOST
+- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2
+- vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
+- vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
+- vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG
+- h_5v-supply: The input supply for HDMI_SWITCH
+- usb-supply: The input supply for OTG_SWITCH
+
+Regulators: All the regulators of RK8XX to be instantiated shall be
listed in a child node named 'regulators'. Each regulator is represented
by a child node of the 'regulators' node.
@@ -48,6 +67,18 @@ number as described in RK808 datasheet.
- SWITCH_REGn
- valid values for n are 1 to 2
+Following regulators of the RK818 PMIC block are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK818 datasheet.
+
+ - DCDC_REGn
+ - valid values for n are 1 to 4.
+ - LDO_REGn
+ - valid values for n are 1 to 9.
+ - SWITCH_REG
+ - HDMI_SWITCH
+ - OTG_SWITCH
+
Standard regulator bindings are used inside regulator subnodes. Check
Documentation/devicetree/bindings/regulator/regulator.txt
for more details
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [rtc-linux] [PATCH v3 6/8] mfd: dt-bindings: Add RK818 device tree bindings document
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
Add device tree bindings documentation for Rockchip's RK818 PMIC.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes since v2:
- Added Acked-by
---
Documentation/devicetree/bindings/mfd/rk808.txt | 37 +++++++++++++++++++++++--
1 file changed, 34 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 4ca6aab..9636ae8 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -1,7 +1,11 @@
-RK808 Power Management Integrated Circuit
+RK8XX Power Management Integrated Circuit
+
+The rk8xx family current members:
+rk808
+rk818
Required properties:
-- compatible: "rockchip,rk808"
+- compatible: "rockchip,rk808", "rockchip,rk818"
- reg: I2C slave address
- interrupt-parent: The parent interrupt controller.
- interrupts: the interrupt outputs of the controller.
@@ -13,6 +17,8 @@ Optional properties:
default output clock name
- rockchip,system-power-controller: Telling whether or not this pmic is controlling
the system power.
+
+Optional RK808 properties:
- vcc1-supply: The input supply for DCDC_REG1
- vcc2-supply: The input supply for DCDC_REG2
- vcc3-supply: The input supply for DCDC_REG3
@@ -29,7 +35,20 @@ Optional properties:
the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
very quickly with no slow ramp time.
-Regulators: All the regulators of RK808 to be instantiated shall be
+Optional RK818 properties:
+- vcc1-supply: The input supply for DCDC_REG1
+- vcc2-supply: The input supply for DCDC_REG2
+- vcc3-supply: The input supply for DCDC_REG3
+- vcc4-supply: The input supply for DCDC_REG4
+- boost-supply: The input supply for DCDC_BOOST
+- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2
+- vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
+- vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
+- vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG
+- h_5v-supply: The input supply for HDMI_SWITCH
+- usb-supply: The input supply for OTG_SWITCH
+
+Regulators: All the regulators of RK8XX to be instantiated shall be
listed in a child node named 'regulators'. Each regulator is represented
by a child node of the 'regulators' node.
@@ -48,6 +67,18 @@ number as described in RK808 datasheet.
- SWITCH_REGn
- valid values for n are 1 to 2
+Following regulators of the RK818 PMIC block are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK818 datasheet.
+
+ - DCDC_REGn
+ - valid values for n are 1 to 4.
+ - LDO_REGn
+ - valid values for n are 1 to 9.
+ - SWITCH_REG
+ - HDMI_SWITCH
+ - OTG_SWITCH
+
Standard regulator bindings are used inside regulator subnodes. Check
Documentation/devicetree/bindings/regulator/regulator.txt
for more details
--
1.9.1
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v3 6/8] mfd: dt-bindings: Add RK818 device tree bindings document
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: mark.rutland-5wv7dgnIgG8, a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
pawel.moll-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
mturquette-rdvid1DuHRBWk0Htik3J/w, sboyd-sgV2jX0FEOL9JmXXK+q4OQ,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
dianders-F7+t8E8rja9g9hUCZPvPmw, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
broonie-DgEjT+Ai2ygdnm+yROfE0A, galak-sgV2jX0FEOL9JmXXK+q4OQ,
zyw-TNX95d0MmH7DzftRWevZcw, lee.jones-QSEj5FYQhm4dnm+yROfE0A
Add device tree bindings documentation for Rockchip's RK818 PMIC.
Signed-off-by: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
Changes since v2:
- Added Acked-by
---
Documentation/devicetree/bindings/mfd/rk808.txt | 37 +++++++++++++++++++++++--
1 file changed, 34 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 4ca6aab..9636ae8 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -1,7 +1,11 @@
-RK808 Power Management Integrated Circuit
+RK8XX Power Management Integrated Circuit
+
+The rk8xx family current members:
+rk808
+rk818
Required properties:
-- compatible: "rockchip,rk808"
+- compatible: "rockchip,rk808", "rockchip,rk818"
- reg: I2C slave address
- interrupt-parent: The parent interrupt controller.
- interrupts: the interrupt outputs of the controller.
@@ -13,6 +17,8 @@ Optional properties:
default output clock name
- rockchip,system-power-controller: Telling whether or not this pmic is controlling
the system power.
+
+Optional RK808 properties:
- vcc1-supply: The input supply for DCDC_REG1
- vcc2-supply: The input supply for DCDC_REG2
- vcc3-supply: The input supply for DCDC_REG3
@@ -29,7 +35,20 @@ Optional properties:
the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
very quickly with no slow ramp time.
-Regulators: All the regulators of RK808 to be instantiated shall be
+Optional RK818 properties:
+- vcc1-supply: The input supply for DCDC_REG1
+- vcc2-supply: The input supply for DCDC_REG2
+- vcc3-supply: The input supply for DCDC_REG3
+- vcc4-supply: The input supply for DCDC_REG4
+- boost-supply: The input supply for DCDC_BOOST
+- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2
+- vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
+- vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
+- vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG
+- h_5v-supply: The input supply for HDMI_SWITCH
+- usb-supply: The input supply for OTG_SWITCH
+
+Regulators: All the regulators of RK8XX to be instantiated shall be
listed in a child node named 'regulators'. Each regulator is represented
by a child node of the 'regulators' node.
@@ -48,6 +67,18 @@ number as described in RK808 datasheet.
- SWITCH_REGn
- valid values for n are 1 to 2
+Following regulators of the RK818 PMIC block are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK818 datasheet.
+
+ - DCDC_REGn
+ - valid values for n are 1 to 4.
+ - LDO_REGn
+ - valid values for n are 1 to 9.
+ - SWITCH_REG
+ - HDMI_SWITCH
+ - OTG_SWITCH
+
Standard regulator bindings are used inside regulator subnodes. Check
Documentation/devicetree/bindings/regulator/regulator.txt
for more details
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v3 7/8] clk: Kconfig: Name RK818 in Kconfig for COMMON_CLK_RK808
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
@ 2016-04-25 13:20 ` Wadim Egorov
-1 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
The RK808 and RK818 PMICs are using a similar register map.
We can reuse the clk driver for the RK818 PMIC. So let's add
the RK818 in the Kconfig description.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
Changes since v2:
- Added Acked-by
---
drivers/clk/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 16f7d33..64b4daa 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -49,10 +49,10 @@ config COMMON_CLK_MAX77802
This driver supports Maxim 77802 crystal oscillator clock.
config COMMON_CLK_RK808
- tristate "Clock driver for RK808"
+ tristate "Clock driver for RK808/RK818"
depends on MFD_RK808
---help---
- This driver supports RK808 crystal oscillator clock. These
+ This driver supports RK808 and RK818 crystal oscillator clock. These
multi-function devices have two fixed-rate oscillators,
clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
by control register.
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [rtc-linux] [PATCH v3 7/8] clk: Kconfig: Name RK818 in Kconfig for COMMON_CLK_RK808
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
The RK808 and RK818 PMICs are using a similar register map.
We can reuse the clk driver for the RK818 PMIC. So let's add
the RK818 in the Kconfig description.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
Changes since v2:
- Added Acked-by
---
drivers/clk/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 16f7d33..64b4daa 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -49,10 +49,10 @@ config COMMON_CLK_MAX77802
This driver supports Maxim 77802 crystal oscillator clock.
config COMMON_CLK_RK808
- tristate "Clock driver for RK808"
+ tristate "Clock driver for RK808/RK818"
depends on MFD_RK808
---help---
- This driver supports RK808 crystal oscillator clock. These
+ This driver supports RK808 and RK818 crystal oscillator clock. These
multi-function devices have two fixed-rate oscillators,
clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
by control register.
--
1.9.1
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v3 8/8] rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
(?)
@ 2016-04-25 13:20 ` Wadim Egorov
-1 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
The RK808 and RK818 PMICs are using a similar register map.
We can reuse the rtc driver for the RK818 PMIC. So let's add
the RK818 in the Kconfig description.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
Changes since v2:
- Added Acked-by
---
drivers/rtc/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 3e84315..acc2651 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -324,11 +324,11 @@ config RTC_DRV_MAX77686
will be called rtc-max77686.
config RTC_DRV_RK808
- tristate "Rockchip RK808 RTC"
+ tristate "Rockchip RK808/RK818 RTC"
depends on MFD_RK808
help
If you say yes here you will get support for the
- RTC of RK808 PMIC.
+ RTC of RK808 and RK818 PMIC.
This driver can also be built as a module. If so, the module
will be called rk808-rtc.
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [rtc-linux] [PATCH v3 8/8] rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, broonie, a.zummo,
alexandre.belloni, dianders, zyw
The RK808 and RK818 PMICs are using a similar register map.
We can reuse the rtc driver for the RK818 PMIC. So let's add
the RK818 in the Kconfig description.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
Changes since v2:
- Added Acked-by
---
drivers/rtc/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 3e84315..acc2651 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -324,11 +324,11 @@ config RTC_DRV_MAX77686
will be called rtc-max77686.
config RTC_DRV_RK808
- tristate "Rockchip RK808 RTC"
+ tristate "Rockchip RK808/RK818 RTC"
depends on MFD_RK808
help
If you say yes here you will get support for the
- RTC of RK808 PMIC.
+ RTC of RK808 and RK818 PMIC.
This driver can also be built as a module. If so, the module
will be called rk808-rtc.
--
1.9.1
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH v3 8/8] rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808
@ 2016-04-25 13:20 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-25 13:20 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: mark.rutland-5wv7dgnIgG8, a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
pawel.moll-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
mturquette-rdvid1DuHRBWk0Htik3J/w, sboyd-sgV2jX0FEOL9JmXXK+q4OQ,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
dianders-F7+t8E8rja9g9hUCZPvPmw, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
broonie-DgEjT+Ai2ygdnm+yROfE0A, galak-sgV2jX0FEOL9JmXXK+q4OQ,
zyw-TNX95d0MmH7DzftRWevZcw, lee.jones-QSEj5FYQhm4dnm+yROfE0A
The RK808 and RK818 PMICs are using a similar register map.
We can reuse the rtc driver for the RK818 PMIC. So let's add
the RK818 in the Kconfig description.
Signed-off-by: Wadim Egorov <w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
Acked-by: Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
Changes since v2:
- Added Acked-by
---
drivers/rtc/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 3e84315..acc2651 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -324,11 +324,11 @@ config RTC_DRV_MAX77686
will be called rtc-max77686.
config RTC_DRV_RK808
- tristate "Rockchip RK808 RTC"
+ tristate "Rockchip RK808/RK818 RTC"
depends on MFD_RK808
help
If you say yes here you will get support for the
- RTC of RK808 PMIC.
+ RTC of RK808 and RK818 PMIC.
This driver can also be built as a module. If so, the module
will be called rk808-rtc.
--
1.9.1
^ permalink raw reply related [flat|nested] 57+ messages in thread
* Re: [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
@ 2016-04-25 17:39 ` Mark Brown
-1 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-25 17:39 UTC (permalink / raw)
To: Wadim Egorov
Cc: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip,
robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, a.zummo,
alexandre.belloni, dianders, zyw
[-- Attachment #1: Type: text/plain, Size: 280 bytes --]
On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
> A common simplified DT parsing code for regulators was introduced in
> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
> method")
This doesn't apply against current code, please check and resend.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* [rtc-linux] Re: [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
@ 2016-04-25 17:39 ` Mark Brown
0 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-25 17:39 UTC (permalink / raw)
To: Wadim Egorov
Cc: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip,
robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, a.zummo,
alexandre.belloni, dianders, zyw
[-- Attachment #1: Type: text/plain, Size: 799 bytes --]
On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
> A common simplified DT parsing code for regulators was introduced in
> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
> method")
This doesn't apply against current code, please check and resend.
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
(?)
(?)
@ 2016-04-25 17:56 ` Mark Brown
-1 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-25 17:56 UTC (permalink / raw)
To: Wadim Egorov
Cc: Mark Brown, linux-kernel, linux-clk, rtc-linux, devicetree,
linux-rockchip, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, mturquette, sboyd, lee.jones, lgirdwood,
broonie, a.zummo, alexandre.belloni, dianders, zyw
The patch
regulator: rk808: remove linear range definitions with a single range
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From afcd666d9db0ebfbf2751cce1e07b548547ca82e Mon Sep 17 00:00:00 2001
From: Wadim Egorov <w.egorov@phytec.de>
Date: Mon, 25 Apr 2016 15:20:43 +0200
Subject: [PATCH] regulator: rk808: remove linear range definitions with a
single range
The driver was using only linear ranges. Now we remove linear range
definitions with a single range. So we have to add an ops struct for
ranges and adjust all other ops functions accordingly.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/rk808-regulator.c | 90 +++++++++++++++++++++----------------
1 file changed, 51 insertions(+), 39 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index d86a3dcd61e2..964b95eed271 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -66,27 +66,11 @@ static const int rk808_buck_config_regs[] = {
RK808_BUCK4_CONFIG_REG,
};
-static const struct regulator_linear_range rk808_buck_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(712500, 0, 63, 12500),
-};
-
-static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 15, 100000),
-};
-
-static const struct regulator_linear_range rk808_ldo_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 16, 100000),
-};
-
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
-static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
-};
-
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -242,6 +226,21 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
+ int sel = regulator_map_voltage_linear(rdev, uv, uv);
+
+ if (sel < 0)
+ return -EINVAL;
+
+ reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->vsel_mask,
+ sel);
+}
+
+static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
+{
+ unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
if (sel < 0)
@@ -277,8 +276,8 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
}
static struct regulator_ops rk808_buck1_2_ops = {
- .list_voltage = regulator_list_voltage_linear_range,
- .map_voltage = regulator_map_voltage_linear_range,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
@@ -292,6 +291,19 @@ static struct regulator_ops rk808_buck1_2_ops = {
};
static struct regulator_ops rk808_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
+};
+
+static struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -299,7 +311,7 @@ static struct regulator_ops rk808_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
- .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
@@ -319,9 +331,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -333,9 +345,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -357,9 +369,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 16,
- .linear_ranges = rk808_buck4_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck4_voltage_ranges),
.vsel_reg = RK808_BUCK4_ON_VSEL_REG,
.vsel_mask = RK808_BUCK4_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -371,9 +383,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO1,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO1_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -386,9 +398,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO2,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO2_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -416,9 +428,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO4_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -431,9 +443,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO5,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO5_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -446,9 +458,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO6,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO6_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -461,9 +473,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO7,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO7_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -476,9 +488,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO8,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO8_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
--
2.8.0.rc3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [rtc-linux] Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-25 17:56 ` Mark Brown
0 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-25 17:56 UTC (permalink / raw)
To: Wadim Egorov
Cc: Mark Brown, linux-kernel, linux-clk, rtc-linux, devicetree,
linux-rockchip, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, mturquette, sboyd, lee.jones, lgirdwood,
broonie, a.zummo, alexandre.belloni, dianders, zyw
The patch
regulator: rk808: remove linear range definitions with a single range
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From afcd666d9db0ebfbf2751cce1e07b548547ca82e Mon Sep 17 00:00:00 2001
From: Wadim Egorov <w.egorov@phytec.de>
Date: Mon, 25 Apr 2016 15:20:43 +0200
Subject: [PATCH] regulator: rk808: remove linear range definitions with a
single range
The driver was using only linear ranges. Now we remove linear range
definitions with a single range. So we have to add an ops struct for
ranges and adjust all other ops functions accordingly.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/rk808-regulator.c | 90 +++++++++++++++++++++----------------
1 file changed, 51 insertions(+), 39 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index d86a3dcd61e2..964b95eed271 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -66,27 +66,11 @@ static const int rk808_buck_config_regs[] = {
RK808_BUCK4_CONFIG_REG,
};
-static const struct regulator_linear_range rk808_buck_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(712500, 0, 63, 12500),
-};
-
-static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 15, 100000),
-};
-
-static const struct regulator_linear_range rk808_ldo_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 16, 100000),
-};
-
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
-static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
-};
-
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -242,6 +226,21 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
+ int sel = regulator_map_voltage_linear(rdev, uv, uv);
+
+ if (sel < 0)
+ return -EINVAL;
+
+ reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->vsel_mask,
+ sel);
+}
+
+static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
+{
+ unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
if (sel < 0)
@@ -277,8 +276,8 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
}
static struct regulator_ops rk808_buck1_2_ops = {
- .list_voltage = regulator_list_voltage_linear_range,
- .map_voltage = regulator_map_voltage_linear_range,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
@@ -292,6 +291,19 @@ static struct regulator_ops rk808_buck1_2_ops = {
};
static struct regulator_ops rk808_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
+};
+
+static struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -299,7 +311,7 @@ static struct regulator_ops rk808_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
- .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
@@ -319,9 +331,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -333,9 +345,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -357,9 +369,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 16,
- .linear_ranges = rk808_buck4_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck4_voltage_ranges),
.vsel_reg = RK808_BUCK4_ON_VSEL_REG,
.vsel_mask = RK808_BUCK4_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -371,9 +383,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO1,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO1_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -386,9 +398,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO2,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO2_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -416,9 +428,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO4_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -431,9 +443,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO5,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO5_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -446,9 +458,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO6,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO6_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -461,9 +473,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO7,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO7_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -476,9 +488,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO8,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO8_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
--
2.8.0.rc3
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply related [flat|nested] 57+ messages in thread
* Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-25 17:56 ` Mark Brown
0 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-25 17:56 UTC (permalink / raw)
To: Wadim Egorov
Cc: Mark Brown, linux-kernel, linux-clk, rtc-linux, devicetree,
linux-rockchip, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, mturquette, sboyd, lee.jones, lgirdwood
The patch
regulator: rk808: remove linear range definitions with a single range
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From afcd666d9db0ebfbf2751cce1e07b548547ca82e Mon Sep 17 00:00:00 2001
From: Wadim Egorov <w.egorov@phytec.de>
Date: Mon, 25 Apr 2016 15:20:43 +0200
Subject: [PATCH] regulator: rk808: remove linear range definitions with a
single range
The driver was using only linear ranges. Now we remove linear range
definitions with a single range. So we have to add an ops struct for
ranges and adjust all other ops functions accordingly.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/rk808-regulator.c | 90 +++++++++++++++++++++----------------
1 file changed, 51 insertions(+), 39 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index d86a3dcd61e2..964b95eed271 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -66,27 +66,11 @@ static const int rk808_buck_config_regs[] = {
RK808_BUCK4_CONFIG_REG,
};
-static const struct regulator_linear_range rk808_buck_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(712500, 0, 63, 12500),
-};
-
-static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 15, 100000),
-};
-
-static const struct regulator_linear_range rk808_ldo_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 16, 100000),
-};
-
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
-static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
-};
-
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -242,6 +226,21 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
+ int sel = regulator_map_voltage_linear(rdev, uv, uv);
+
+ if (sel < 0)
+ return -EINVAL;
+
+ reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->vsel_mask,
+ sel);
+}
+
+static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
+{
+ unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
if (sel < 0)
@@ -277,8 +276,8 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
}
static struct regulator_ops rk808_buck1_2_ops = {
- .list_voltage = regulator_list_voltage_linear_range,
- .map_voltage = regulator_map_voltage_linear_range,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
@@ -292,6 +291,19 @@ static struct regulator_ops rk808_buck1_2_ops = {
};
static struct regulator_ops rk808_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
+};
+
+static struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -299,7 +311,7 @@ static struct regulator_ops rk808_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
- .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
@@ -319,9 +331,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -333,9 +345,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -357,9 +369,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 16,
- .linear_ranges = rk808_buck4_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck4_voltage_ranges),
.vsel_reg = RK808_BUCK4_ON_VSEL_REG,
.vsel_mask = RK808_BUCK4_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -371,9 +383,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO1,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO1_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -386,9 +398,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO2,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO2_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -416,9 +428,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO4_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -431,9 +443,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO5,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO5_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -446,9 +458,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO6,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO6_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -461,9 +473,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO7,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO7_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -476,9 +488,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO8,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO8_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
--
2.8.0.rc3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-25 17:56 ` Mark Brown
0 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-25 17:56 UTC (permalink / raw)
To: Wadim Egorov
Cc: Mark Brown, linux-kernel, linux-clk, rtc-linux, devicetree,
linux-rockchip, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, mturquette, sboyd, lee.jones, lgirdwood
The patch
regulator: rk808: remove linear range definitions with a single range
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From afcd666d9db0ebfbf2751cce1e07b548547ca82e Mon Sep 17 00:00:00 2001
From: Wadim Egorov <w.egorov@phytec.de>
Date: Mon, 25 Apr 2016 15:20:43 +0200
Subject: [PATCH] regulator: rk808: remove linear range definitions with a
single range
The driver was using only linear ranges. Now we remove linear range
definitions with a single range. So we have to add an ops struct for
ranges and adjust all other ops functions accordingly.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/rk808-regulator.c | 90 +++++++++++++++++++++----------------
1 file changed, 51 insertions(+), 39 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index d86a3dcd61e2..964b95eed271 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -66,27 +66,11 @@ static const int rk808_buck_config_regs[] = {
RK808_BUCK4_CONFIG_REG,
};
-static const struct regulator_linear_range rk808_buck_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(712500, 0, 63, 12500),
-};
-
-static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 15, 100000),
-};
-
-static const struct regulator_linear_range rk808_ldo_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(1800000, 0, 16, 100000),
-};
-
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
-static const struct regulator_linear_range rk808_ldo6_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(800000, 0, 17, 100000),
-};
-
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
@@ -242,6 +226,21 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
+ int sel = regulator_map_voltage_linear(rdev, uv, uv);
+
+ if (sel < 0)
+ return -EINVAL;
+
+ reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->vsel_mask,
+ sel);
+}
+
+static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
+{
+ unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
if (sel < 0)
@@ -277,8 +276,8 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
}
static struct regulator_ops rk808_buck1_2_ops = {
- .list_voltage = regulator_list_voltage_linear_range,
- .map_voltage = regulator_map_voltage_linear_range,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
@@ -292,6 +291,19 @@ static struct regulator_ops rk808_buck1_2_ops = {
};
static struct regulator_ops rk808_reg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
+};
+
+static struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -299,7 +311,7 @@ static struct regulator_ops rk808_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
- .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
@@ -319,9 +331,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -333,9 +345,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 712500,
+ .uV_step = 12500,
.n_voltages = 64,
- .linear_ranges = rk808_buck_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck_voltage_ranges),
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -357,9 +369,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_DCDC4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 16,
- .linear_ranges = rk808_buck4_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_buck4_voltage_ranges),
.vsel_reg = RK808_BUCK4_ON_VSEL_REG,
.vsel_mask = RK808_BUCK4_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
@@ -371,9 +383,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO1,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO1_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -386,9 +398,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO2,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO2_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -416,9 +428,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO4,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO4_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -431,9 +443,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO5,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO5_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -446,9 +458,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO6,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO6_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -461,9 +473,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO7,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 800000,
+ .uV_step = 100000,
.n_voltages = 18,
- .linear_ranges = rk808_ldo6_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo6_voltage_ranges),
.vsel_reg = RK808_LDO7_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
@@ -476,9 +488,9 @@ static const struct regulator_desc rk808_reg[] = {
.id = RK808_ID_LDO8,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
+ .min_uV = 1800000,
+ .uV_step = 100000,
.n_voltages = 17,
- .linear_ranges = rk808_ldo_voltage_ranges,
- .n_linear_ranges = ARRAY_SIZE(rk808_ldo_voltage_ranges),
.vsel_reg = RK808_LDO8_ON_VSEL_REG,
.vsel_mask = RK808_LDO_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
--
2.8.0.rc3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* Re: [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
2016-04-25 17:39 ` [rtc-linux] " Mark Brown
(?)
@ 2016-04-26 7:45 ` Wadim Egorov
-1 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-26 7:45 UTC (permalink / raw)
To: Mark Brown
Cc: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip,
robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, a.zummo,
alexandre.belloni, dianders, zyw
On 25.04.2016 19:39, Mark Brown wrote:
> On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
>> A common simplified DT parsing code for regulators was introduced in
>> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
>> method")
> This doesn't apply against current code, please check and resend.
Hm, for me all patches apply to the current code.
This patch depends on the first rename patch. Maybe this is the problem?
^ permalink raw reply [flat|nested] 57+ messages in thread
* [rtc-linux] Re: [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
@ 2016-04-26 7:45 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-26 7:45 UTC (permalink / raw)
To: Mark Brown
Cc: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip,
robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, a.zummo,
alexandre.belloni, dianders, zyw
On 25.04.2016 19:39, Mark Brown wrote:
> On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
>> A common simplified DT parsing code for regulators was introduced in
>> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
>> method")
> This doesn't apply against current code, please check and resend.
Hm, for me all patches apply to the current code.
This patch depends on the first rename patch. Maybe this is the problem?
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
@ 2016-04-26 7:45 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-26 7:45 UTC (permalink / raw)
To: Mark Brown
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ, lee.jones-QSEj5FYQhm4dnm+yROfE0A,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
dianders-F7+t8E8rja9g9hUCZPvPmw, zyw-TNX95d0MmH7DzftRWevZcw
On 25.04.2016 19:39, Mark Brown wrote:
> On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
>> A common simplified DT parsing code for regulators was introduced in
>> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
>> method")
> This doesn't apply against current code, please check and resend.
Hm, for me all patches apply to the current code.
This patch depends on the first rename patch. Maybe this is the problem?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
2016-04-26 7:45 ` [rtc-linux] " Wadim Egorov
@ 2016-04-26 8:17 ` Heiko Stübner
-1 siblings, 0 replies; 57+ messages in thread
From: Heiko Stübner @ 2016-04-26 8:17 UTC (permalink / raw)
To: Wadim Egorov
Cc: Mark Brown, linux-kernel, linux-clk, rtc-linux, devicetree,
linux-rockchip, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, mturquette, sboyd, lee.jones, lgirdwood,
a.zummo, alexandre.belloni, dianders, zyw
Am Dienstag, 26. April 2016, 09:45:56 schrieb Wadim Egorov:
> On 25.04.2016 19:39, Mark Brown wrote:
> > On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
> >> A common simplified DT parsing code for regulators was introduced in
> >> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
> >> method")
> >
> > This doesn't apply against current code, please check and resend.
>
> Hm, for me all patches apply to the current code.
> This patch depends on the first rename patch. Maybe this is the problem?
which is the reason why renaming stuff makes everything just more complicated
without providing additional value ;-)
The first patch would go through the mfd-tree (if accepted by Lee and Acked by
the other involved subsystem maintainers) which would then need a stable
branch merged into the regulator tree - or after the first patch goes in you
simply wait for a kernel release.
Normally I would expect the reasonable kernel developer to be able to simply
read code, kconfig, docs stating the drivers being for rk808 and rk818 without
getting "confused" by some structs mentioning the rk808.
Heiko
^ permalink raw reply [flat|nested] 57+ messages in thread
* [rtc-linux] Re: [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
@ 2016-04-26 8:17 ` Heiko Stübner
0 siblings, 0 replies; 57+ messages in thread
From: Heiko Stübner @ 2016-04-26 8:17 UTC (permalink / raw)
To: Wadim Egorov
Cc: Mark Brown, linux-kernel, linux-clk, rtc-linux, devicetree,
linux-rockchip, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, mturquette, sboyd, lee.jones, lgirdwood,
a.zummo, alexandre.belloni, dianders, zyw
Am Dienstag, 26. April 2016, 09:45:56 schrieb Wadim Egorov:
> On 25.04.2016 19:39, Mark Brown wrote:
> > On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
> >> A common simplified DT parsing code for regulators was introduced in
> >> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
> >> method")
> >
> > This doesn't apply against current code, please check and resend.
>
> Hm, for me all patches apply to the current code.
> This patch depends on the first rename patch. Maybe this is the problem?
which is the reason why renaming stuff makes everything just more complicated
without providing additional value ;-)
The first patch would go through the mfd-tree (if accepted by Lee and Acked by
the other involved subsystem maintainers) which would then need a stable
branch merged into the regulator tree - or after the first patch goes in you
simply wait for a kernel release.
Normally I would expect the reasonable kernel developer to be able to simply
read code, kconfig, docs stating the drivers being for rk808 and rk818 without
getting "confused" by some structs mentioning the rk808.
Heiko
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
2016-04-26 8:17 ` [rtc-linux] " Heiko Stübner
(?)
@ 2016-04-26 8:46 ` Wadim Egorov
-1 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-26 8:46 UTC (permalink / raw)
To: Heiko Stübner
Cc: Mark Brown, linux-kernel, linux-clk, rtc-linux, devicetree,
linux-rockchip, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, mturquette, sboyd, lee.jones, lgirdwood,
a.zummo, alexandre.belloni, dianders, zyw
On 26.04.2016 10:17, Heiko Stübner wrote:
> Am Dienstag, 26. April 2016, 09:45:56 schrieb Wadim Egorov:
>> On 25.04.2016 19:39, Mark Brown wrote:
>>> On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
>>>> A common simplified DT parsing code for regulators was introduced in
>>>> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
>>>> method")
>>> This doesn't apply against current code, please check and resend.
>> Hm, for me all patches apply to the current code.
>> This patch depends on the first rename patch. Maybe this is the problem?
> which is the reason why renaming stuff makes everything just more complicated
> without providing additional value ;-)
>
> The first patch would go through the mfd-tree (if accepted by Lee and Acked by
> the other involved subsystem maintainers) which would then need a stable
> branch merged into the regulator tree - or after the first patch goes in you
> simply wait for a kernel release.
>
> Normally I would expect the reasonable kernel developer to be able to simply
> read code, kconfig, docs stating the drivers being for rk808 and rk818 without
> getting "confused" by some structs mentioning the rk808.
>
>
> Heiko
I will drop the first patch and send a v4 later
^ permalink raw reply [flat|nested] 57+ messages in thread
* [rtc-linux] Re: [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
@ 2016-04-26 8:46 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-26 8:46 UTC (permalink / raw)
To: Heiko Stübner
Cc: Mark Brown, linux-kernel, linux-clk, rtc-linux, devicetree,
linux-rockchip, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, mturquette, sboyd, lee.jones, lgirdwood,
a.zummo, alexandre.belloni, dianders, zyw
On 26.04.2016 10:17, Heiko St=C3=BCbner wrote:
> Am Dienstag, 26. April 2016, 09:45:56 schrieb Wadim Egorov:
>> On 25.04.2016 19:39, Mark Brown wrote:
>>> On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
>>>> A common simplified DT parsing code for regulators was introduced in
>>>> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
>>>> method")
>>> This doesn't apply against current code, please check and resend.
>> Hm, for me all patches apply to the current code.
>> This patch depends on the first rename patch. Maybe this is the problem?
> which is the reason why renaming stuff makes everything just more complic=
ated=20
> without providing additional value ;-)=20
>
> The first patch would go through the mfd-tree (if accepted by Lee and Ack=
ed by=20
> the other involved subsystem maintainers) which would then need a stable=
=20
> branch merged into the regulator tree - or after the first patch goes in =
you=20
> simply wait for a kernel release.
>
> Normally I would expect the reasonable kernel developer to be able to sim=
ply=20
> read code, kconfig, docs stating the drivers being for rk808 and rk818 wi=
thout=20
> getting "confused" by some structs mentioning the rk808.
>
>
> Heiko
I will drop the first patch and send a v4 later
--=20
--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code
@ 2016-04-26 8:46 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-26 8:46 UTC (permalink / raw)
To: Heiko Stübner
Cc: Mark Brown, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, mturquette-rdvid1DuHRBWk0Htik3J/w,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ, lee.jones-QSEj5FYQhm4dnm+yROfE0A,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
dianders-F7+t8E8rja9g9hUCZPvPmw, zyw-TNX95d0MmH7DzftRWevZcw
On 26.04.2016 10:17, Heiko Stübner wrote:
> Am Dienstag, 26. April 2016, 09:45:56 schrieb Wadim Egorov:
>> On 25.04.2016 19:39, Mark Brown wrote:
>>> On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
>>>> A common simplified DT parsing code for regulators was introduced in
>>>> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
>>>> method")
>>> This doesn't apply against current code, please check and resend.
>> Hm, for me all patches apply to the current code.
>> This patch depends on the first rename patch. Maybe this is the problem?
> which is the reason why renaming stuff makes everything just more complicated
> without providing additional value ;-)
>
> The first patch would go through the mfd-tree (if accepted by Lee and Acked by
> the other involved subsystem maintainers) which would then need a stable
> branch merged into the regulator tree - or after the first patch goes in you
> simply wait for a kernel release.
>
> Normally I would expect the reasonable kernel developer to be able to simply
> read code, kconfig, docs stating the drivers being for rk808 and rk818 without
> getting "confused" by some structs mentioning the rk808.
>
>
> Heiko
I will drop the first patch and send a v4 later
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH v3 3/8] regulator: rk808: remove linear range definitions with a single range
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
@ 2016-04-26 10:46 ` Mark Brown
-1 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-26 10:46 UTC (permalink / raw)
To: Wadim Egorov
Cc: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip,
robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, a.zummo,
alexandre.belloni, dianders, zyw
[-- Attachment #1: Type: text/plain, Size: 1385 bytes --]
On Mon, Apr 25, 2016 at 03:20:43PM +0200, Wadim Egorov wrote:
> The driver was using only linear ranges. Now we remove linear range
> definitions with a single range. So we have to add an ops struct for
> ranges and adjust all other ops functions accordingly.
This and some other cleanups are now available as a signed tag from my
repository:
The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/regulator-rk808-cleanups
for you to fetch changes up to 4a5ed8c1adc39f86a2887183c71b007bc962fdce:
regulator: rk808: remove unused rk808_reg_ops_ranges (2016-04-26 11:11:29 +0100)
----------------------------------------------------------------
regulator: rk808: Some cleanups for the rk808 driver
These are tagged to facilitate the addition of support for the rk818
which may end up overlapping with some of these cleanups.
----------------------------------------------------------------
Arnd Bergmann (1):
regulator: rk808: remove unused rk808_reg_ops_ranges
Wadim Egorov (1):
regulator: rk808: remove linear range definitions with a single range
drivers/regulator/rk808-regulator.c | 66 ++++++++++++++-----------------------
1 file changed, 25 insertions(+), 41 deletions(-)
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* [rtc-linux] Re: [PATCH v3 3/8] regulator: rk808: remove linear range definitions with a single range
@ 2016-04-26 10:46 ` Mark Brown
0 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-26 10:46 UTC (permalink / raw)
To: Wadim Egorov
Cc: linux-kernel, linux-clk, rtc-linux, devicetree, linux-rockchip,
robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
mturquette, sboyd, lee.jones, lgirdwood, a.zummo,
alexandre.belloni, dianders, zyw
[-- Attachment #1: Type: text/plain, Size: 1904 bytes --]
On Mon, Apr 25, 2016 at 03:20:43PM +0200, Wadim Egorov wrote:
> The driver was using only linear ranges. Now we remove linear range
> definitions with a single range. So we have to add an ops struct for
> ranges and adjust all other ops functions accordingly.
This and some other cleanups are now available as a signed tag from my
repository:
The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/regulator-rk808-cleanups
for you to fetch changes up to 4a5ed8c1adc39f86a2887183c71b007bc962fdce:
regulator: rk808: remove unused rk808_reg_ops_ranges (2016-04-26 11:11:29 +0100)
----------------------------------------------------------------
regulator: rk808: Some cleanups for the rk808 driver
These are tagged to facilitate the addition of support for the rk818
which may end up overlapping with some of these cleanups.
----------------------------------------------------------------
Arnd Bergmann (1):
regulator: rk808: remove unused rk808_reg_ops_ranges
Wadim Egorov (1):
regulator: rk808: remove linear range definitions with a single range
drivers/regulator/rk808-regulator.c | 66 ++++++++++++++-----------------------
1 file changed, 25 insertions(+), 41 deletions(-)
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
2016-04-25 17:56 ` [rtc-linux] " Mark Brown
@ 2016-04-26 19:33 ` Heiko Stübner
-1 siblings, 0 replies; 57+ messages in thread
From: Heiko Stübner @ 2016-04-26 19:33 UTC (permalink / raw)
To: linux-rockchip, Mark Brown, Wadim Egorov
Cc: mark.rutland, devicetree, a.zummo, pawel.moll, rtc-linux,
ijc+devicetree, mturquette, sboyd, linux-kernel, robh+dt,
lgirdwood, alexandre.belloni, dianders, galak, zyw, lee.jones,
linux-clk
Am Montag, 25. April 2016, 18:56:54 schrieb Mark Brown:
> The patch
>
> regulator: rk808: remove linear range definitions with a single range
>
> has been applied to the regulator tree at
>
> git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on
rk3288-veyron devices with the bug below. Reverting this one patch
results in the system booting again:
[ 1.059661] ------------[ cut here ]------------
[ 1.064272] kernel BUG at drivers/regulator/helpers.c:255!
[ 1.069750] Internal error: Oops - BUG: 0 [#1] SMP ARM
[ 1.074880] Modules linked in:
[ 1.077943] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426 #133
[ 1.085504] Hardware name: Rockchip (Device Tree)
[ 1.090201] task: ee078000 ti: ee066000 task.ti: ee066000
[ 1.095597] PC is at regulator_map_voltage_linear+0xcc/0xd4
[ 1.101163] LR is at regulator_map_voltage+0x1c/0x5c
[ 1.106121] pc : [<c06aed10>] lr : [<c06ab374>] psr: 60000013
[ 1.106121] sp : ee0679b0 ip : c13a05b8 fp : ee64a220
[ 1.117583] r10: 000f4240 r9 : c13a05b8 r8 : 000f4240
[ 1.122800] r7 : 000f4240 r6 : c0cdc768 r5 : ee5f7800 r4 : 000f4240
[ 1.129317] r3 : 00000000 r2 : 000f4240 r1 : 000f4240 r0 : ee5f7800
[ 1.135836] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 1.142960] Control: 10c5387d Table: 0020406a DAC: 00000051
[ 1.148697] Process swapper/0 (pid: 1, stack limit = 0xee066220)
[ 1.154695] Stack: (0xee0679b0 to 0xee068000)
[ 1.159046] 79a0: ee5f7800 ffffffff 000f4240 000f4240
[ 1.167217] 79c0: 000f4240 c06ab374 ee5f7800 c06ab4a4 c0f3386c ee0679f4 ee631580 c03cddd0
[ 1.175386] 79e0: ee62ea10 ee5f7800 c0cdc768 ee631580 00000000 000f4240 000f4240 c06acab4
[ 1.183557] 7a00: 000f4240 c0612e14 c0f13724 ee5f7800 c13a05b8 c1395f08 ee64a220 ee631480
[ 1.191726] 7a20: ee62dc10 ee633900 ee5f7860 c0413184 ee62ef50 c06af210 ee067aac ee5f79fc
[ 1.199897] 7a40: ee5f7814 ee5f781c ee62ef50 ee64a810 ee067aac c0cdc768 ee633750 ee62ea10
[ 1.208066] 7a60: ee62ef50 ee067aac ee64a220 c06af258 ee64a810 c13a0428 00000006 c0cdc814
[ 1.216236] 7a80: ee62ea10 c06b9704 ee03f000 80000001 00000004 00000000 ee6305f0 ee64a800
[ 1.224406] 7aa0: eefd9f8c ee64a400 c145ad98 ee64a220 ee62dc10 ee62ef50 eefdb068 ee64a400
[ 1.232576] 7ac0: 00000000 00000000 00000000 00000000 00000001 ee64a810 c06b9574 c13a0368
[ 1.240746] 7ae0: c13a0354 00000000 00000000 c145ad98 00000000 c079eef0 ee64a810 c145ad90
[ 1.248916] 7b00: 00000000 c13a0368 00000000 c079d77c 00000100 ef5bc901 ee64a96c 00000000
[ 1.257085] 7b20: ee64a810 ee067b60 ee067b40 c079d8ec 00000000 00000000 00000000 c079bc78
[ 1.265255] 7b40: ee04bf70 ee3af338 ee64a810 ee64a810 ee64a844 00000001 c145ad6c c079daa0
[ 1.273425] 7b60: ee64a810 00000001 ee64a810 ee64a810 ee64a810 c13b15b8 c145ad6c c079c7bc
[ 1.281595] 7b80: ee64a810 ee64a818 ee64a220 c079b334 00000000 c05a7b20 ee64a800 ee64a810
[ 1.289765] 7ba0: ee64a800 ee64a810 00000000 00000010 ee64a810 ee62ed44 00000000 c079f140
[ 1.297935] 7bc0: c0d22b00 ee64a220 ee64a800 00000010 ee64a810 c07ca2c4 00000000 00000042
[ 1.306105] 7be0: ee64a220 c0413d60 00000009 ee62ed48 c0d22b44 00000001 00000003 ee64a220
[ 1.314275] 7c00: 00000000 ffffffff ee62ca80 c07ca578 00000000 00000000 ee62ca80 c07ca4c8
[ 1.322444] 7c20: 00000000 ee62ed40 ffffffff 00000000 c0d22ac4 ee64a220 ee62ed10 c0d22abc
[ 1.330614] 7c40: ffffffff 00000003 c0d22ac4 00000000 ee64a220 c07ca62c 00000000 00000000
[ 1.338784] 7c60: ee62ca80 ee64a200 c0d22ac4 00000000 ee64a200 00000021 ee62ea10 c07d8fb0
[ 1.346954] 7c80: 00000000 00000000 ee62ca80 c07a7c24 00000042 eefd9a34 ee62e9c0 c0d22d10
[ 1.355124] 7ca0: ee64a204 ee64a200 ee64a220 c07d8e90 00000000 c145ad98 0000011e c099b888
[ 1.363294] 7cc0: ee64a220 c145ad90 00000000 c13b5fa8 00000000 c079d77c c13b5fa8 00000000
[ 1.371464] 7ce0: ee64a37c 00000000 ee64a220 ee067d28 ee067d08 c079d8ec 00000000 00000000
[ 1.379634] 7d00: 00000000 c079bc78 ee166870 ee59fd38 ee64a220 ee64a220 ee64a254 00000001
[ 1.387804] 7d20: c145ad6c c079daa0 ee64a220 00000001 ee64a220 ee64a220 ee64a220 c13c8ca0
[ 1.395974] 7d40: c145ad6c c079c7bc ee64a220 ee64a228 ee5f6038 c079b334 c145ad6c c079a5b8
[ 1.404144] 7d60: ee64a200 ee067db0 ee64a200 ee067db0 ee5f6010 ee64a220 ee64a200 00000000
[ 1.412314] 7d80: ee64a204 c099c95c eefd9a34 c0a29e9c eefd9a34 eefd9a34 ee067db0 ee067ddc
[ 1.420483] 7da0: ee5f6010 00000000 c145ad98 c099ccac 30386b72 00000038 00000000 00000000
[ 1.428653] 7dc0: 00000000 001b0080 00000000 ee067ddc eefd9a34 00000000 00000000 00000000
[ 1.436823] 7de0: 00000000 00000000 00000000 00000004 eefd9a34 00000000 ee5f6010 eefd9a34
[ 1.444993] 7e00: ee5f6038 c099d090 00000000 ee5f621c ee5f6010 ee193010 ee5f6240 00000000
[ 1.453162] 7e20: 00000000 c09a917c 00000000 ee178680 ee5f6010 ee193010 ee193010 c09a8f68
[ 1.461333] 7e40: c13c9344 c13c9330 00000000 c079eef0 ee193010 c145ad90 00000000 c13c9344
[ 1.469502] 7e60: 00000000 c079d77c c11a6034 c0a29d84 ee19316c 00000000 ee193000 ee193010
[ 1.477672] 7e80: c13c9344 ee193044 00000000 c110072c c11a6034 c079d8e8 c13c9344 c079d844
[ 1.485842] 7ea0: ee067ea8 c079bd18 ee04bf5c ee1756b4 00000007 c13c9344 ee624e80 c13b15b8
[ 1.494012] 7ec0: 00000000 c079c58c c0f8a70c c11437f0 c13c9344 c13c9344 00000000 c1143800
[ 1.502182] 7ee0: 00000007 c079df40 c11a602c 00000000 c1143800 c0301ecc 00000023 c1010978
[ 1.510352] 7f00: 0000002d ee067f20 c035cf00 c05ab5dc 20000013 ffffffff 00000051 c1336720
[ 1.518521] 7f20: efffcc0b efffcbfc efffcc0b c035d574 00000000 c0f833e0 c10106bc 00000000
[ 1.526692] 7f40: 00000006 00000006 c13366e8 c11a602c c120ec4c c141b000 00000007 c110072c
[ 1.534861] 7f60: 00000000 c11a6034 0000011e c1100654 00000006 00000006 00000000 c110072c
[ 1.543031] 7f80: c0b99714 00000000 c0b99714 00000000 00000000 00000000 00000000 00000000
[ 1.551201] 7fa0: 00000000 c0b9971c 00000000 c03083f8 00000000 00000000 00000000 00000000
[ 1.559371] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.567540] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 1.575716] [<c06aed10>] (regulator_map_voltage_linear) from [<c06ab374>] (regulator_map_voltage+0x1c/0x5c)
[ 1.585447] [<c06ab374>] (regulator_map_voltage) from [<c06ab4a4>] (_regulator_do_set_voltage+0xf0/0x368)
[ 1.595005] [<c06ab4a4>] (_regulator_do_set_voltage) from [<c06acab4>] (regulator_register+0xb10/0x1038)
[ 1.604476] [<c06acab4>] (regulator_register) from [<c06af258>] (devm_regulator_register+0x40/0x74)
[ 1.613515] [<c06af258>] (devm_regulator_register) from [<c06b9704>] (rk808_regulator_probe+0x190/0x228)
[ 1.622988] [<c06b9704>] (rk808_regulator_probe) from [<c079eef0>] (platform_drv_probe+0x54/0xa4)
[ 1.631853] [<c079eef0>] (platform_drv_probe) from [<c079d77c>] (driver_probe_device+0x1f8/0x2c0)
[ 1.640718] [<c079d77c>] (driver_probe_device) from [<c079bc78>] (bus_for_each_drv+0x60/0x8c)
[ 1.649235] [<c079bc78>] (bus_for_each_drv) from [<c079daa0>] (__device_attach+0x9c/0xfc)
[ 1.657406] [<c079daa0>] (__device_attach) from [<c079c7bc>] (bus_probe_device+0x84/0x8c)
[ 1.665577] [<c079c7bc>] (bus_probe_device) from [<c079b334>] (device_add+0x34c/0x514)
[ 1.673489] [<c079b334>] (device_add) from [<c079f140>] (platform_device_add+0x170/0x218)
[ 1.681661] [<c079f140>] (platform_device_add) from [<c07ca2c4>] (mfd_add_device+0x25c/0x32c)
[ 1.690180] [<c07ca2c4>] (mfd_add_device) from [<c07ca578>] (mfd_add_devices+0xac/0xf8)
[ 1.698177] [<c07ca578>] (mfd_add_devices) from [<c07ca62c>] (devm_mfd_add_devices+0x68/0x9c)
[ 1.706695] [<c07ca62c>] (devm_mfd_add_devices) from [<c07d8fb0>] (rk808_probe+0x120/0x1f0)
[ 1.715040] [<c07d8fb0>] (rk808_probe) from [<c099b888>] (i2c_device_probe+0x19c/0x21c)
[ 1.723038] [<c099b888>] (i2c_device_probe) from [<c079d77c>] (driver_probe_device+0x1f8/0x2c0)
[ 1.731728] [<c079d77c>] (driver_probe_device) from [<c079bc78>] (bus_for_each_drv+0x60/0x8c)
[ 1.740246] [<c079bc78>] (bus_for_each_drv) from [<c079daa0>] (__device_attach+0x9c/0xfc)
[ 1.748416] [<c079daa0>] (__device_attach) from [<c079c7bc>] (bus_probe_device+0x84/0x8c)
[ 1.756587] [<c079c7bc>] (bus_probe_device) from [<c079b334>] (device_add+0x34c/0x514)
[ 1.764498] [<c079b334>] (device_add) from [<c099c95c>] (i2c_new_device+0x11c/0x190)
[ 1.772236] [<c099c95c>] (i2c_new_device) from [<c099ccac>] (of_i2c_register_device+0x120/0x1bc)
[ 1.781013] [<c099ccac>] (of_i2c_register_device) from [<c099d090>] (i2c_register_adapter+0x19c/0x354)
[ 1.790312] [<c099d090>] (i2c_register_adapter) from [<c09a917c>] (rk3x_i2c_probe+0x214/0x314)
[ 1.798915] [<c09a917c>] (rk3x_i2c_probe) from [<c079eef0>] (platform_drv_probe+0x54/0xa4)
[ 1.807172] [<c079eef0>] (platform_drv_probe) from [<c079d77c>] (driver_probe_device+0x1f8/0x2c0)
[ 1.816035] [<c079d77c>] (driver_probe_device) from [<c079d8e8>] (__driver_attach+0xa4/0xa8)
[ 1.824465] [<c079d8e8>] (__driver_attach) from [<c079bd18>] (bus_for_each_dev+0x74/0x98)
[ 1.832637] [<c079bd18>] (bus_for_each_dev) from [<c079c58c>] (bus_add_driver+0x170/0x1f4)
[ 1.840894] [<c079c58c>] (bus_add_driver) from [<c079df40>] (driver_register+0x78/0xf8)
[ 1.848892] [<c079df40>] (driver_register) from [<c0301ecc>] (do_one_initcall+0x40/0x178)
[ 1.857065] [<c0301ecc>] (do_one_initcall) from [<c1100654>] (kernel_init_freeable+0x114/0x1ec)
[ 1.865758] [<c1100654>] (kernel_init_freeable) from [<c0b9971c>] (kernel_init+0x8/0x118)
[ 1.873930] [<c0b9971c>] (kernel_init) from [<c03083f8>] (ret_from_fork+0x14/0x3c)
[ 1.881494] Code: e3540000 01a03005 0affffe4 eaffffed (e7f001f2)
[ 1.887587] ---[ end trace 5b1e9b1610f54a8c ]---
^ permalink raw reply [flat|nested] 57+ messages in thread
* [rtc-linux] Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-26 19:33 ` Heiko Stübner
0 siblings, 0 replies; 57+ messages in thread
From: Heiko Stübner @ 2016-04-26 19:33 UTC (permalink / raw)
To: linux-rockchip, Mark Brown, Wadim Egorov
Cc: mark.rutland, devicetree, a.zummo, pawel.moll, rtc-linux,
ijc+devicetree, mturquette, sboyd, linux-kernel, robh+dt,
lgirdwood, alexandre.belloni, dianders, galak, zyw, lee.jones,
linux-clk
Am Montag, 25. April 2016, 18:56:54 schrieb Mark Brown:
> The patch
>
> regulator: rk808: remove linear range definitions with a single range
>
> has been applied to the regulator tree at
>
> git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on
rk3288-veyron devices with the bug below. Reverting this one patch
results in the system booting again:
[ 1.059661] ------------[ cut here ]------------
[ 1.064272] kernel BUG at drivers/regulator/helpers.c:255!
[ 1.069750] Internal error: Oops - BUG: 0 [#1] SMP ARM
[ 1.074880] Modules linked in:
[ 1.077943] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426 #133
[ 1.085504] Hardware name: Rockchip (Device Tree)
[ 1.090201] task: ee078000 ti: ee066000 task.ti: ee066000
[ 1.095597] PC is at regulator_map_voltage_linear+0xcc/0xd4
[ 1.101163] LR is at regulator_map_voltage+0x1c/0x5c
[ 1.106121] pc : [<c06aed10>] lr : [<c06ab374>] psr: 60000013
[ 1.106121] sp : ee0679b0 ip : c13a05b8 fp : ee64a220
[ 1.117583] r10: 000f4240 r9 : c13a05b8 r8 : 000f4240
[ 1.122800] r7 : 000f4240 r6 : c0cdc768 r5 : ee5f7800 r4 : 000f4240
[ 1.129317] r3 : 00000000 r2 : 000f4240 r1 : 000f4240 r0 : ee5f7800
[ 1.135836] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 1.142960] Control: 10c5387d Table: 0020406a DAC: 00000051
[ 1.148697] Process swapper/0 (pid: 1, stack limit = 0xee066220)
[ 1.154695] Stack: (0xee0679b0 to 0xee068000)
[ 1.159046] 79a0: ee5f7800 ffffffff 000f4240 000f4240
[ 1.167217] 79c0: 000f4240 c06ab374 ee5f7800 c06ab4a4 c0f3386c ee0679f4 ee631580 c03cddd0
[ 1.175386] 79e0: ee62ea10 ee5f7800 c0cdc768 ee631580 00000000 000f4240 000f4240 c06acab4
[ 1.183557] 7a00: 000f4240 c0612e14 c0f13724 ee5f7800 c13a05b8 c1395f08 ee64a220 ee631480
[ 1.191726] 7a20: ee62dc10 ee633900 ee5f7860 c0413184 ee62ef50 c06af210 ee067aac ee5f79fc
[ 1.199897] 7a40: ee5f7814 ee5f781c ee62ef50 ee64a810 ee067aac c0cdc768 ee633750 ee62ea10
[ 1.208066] 7a60: ee62ef50 ee067aac ee64a220 c06af258 ee64a810 c13a0428 00000006 c0cdc814
[ 1.216236] 7a80: ee62ea10 c06b9704 ee03f000 80000001 00000004 00000000 ee6305f0 ee64a800
[ 1.224406] 7aa0: eefd9f8c ee64a400 c145ad98 ee64a220 ee62dc10 ee62ef50 eefdb068 ee64a400
[ 1.232576] 7ac0: 00000000 00000000 00000000 00000000 00000001 ee64a810 c06b9574 c13a0368
[ 1.240746] 7ae0: c13a0354 00000000 00000000 c145ad98 00000000 c079eef0 ee64a810 c145ad90
[ 1.248916] 7b00: 00000000 c13a0368 00000000 c079d77c 00000100 ef5bc901 ee64a96c 00000000
[ 1.257085] 7b20: ee64a810 ee067b60 ee067b40 c079d8ec 00000000 00000000 00000000 c079bc78
[ 1.265255] 7b40: ee04bf70 ee3af338 ee64a810 ee64a810 ee64a844 00000001 c145ad6c c079daa0
[ 1.273425] 7b60: ee64a810 00000001 ee64a810 ee64a810 ee64a810 c13b15b8 c145ad6c c079c7bc
[ 1.281595] 7b80: ee64a810 ee64a818 ee64a220 c079b334 00000000 c05a7b20 ee64a800 ee64a810
[ 1.289765] 7ba0: ee64a800 ee64a810 00000000 00000010 ee64a810 ee62ed44 00000000 c079f140
[ 1.297935] 7bc0: c0d22b00 ee64a220 ee64a800 00000010 ee64a810 c07ca2c4 00000000 00000042
[ 1.306105] 7be0: ee64a220 c0413d60 00000009 ee62ed48 c0d22b44 00000001 00000003 ee64a220
[ 1.314275] 7c00: 00000000 ffffffff ee62ca80 c07ca578 00000000 00000000 ee62ca80 c07ca4c8
[ 1.322444] 7c20: 00000000 ee62ed40 ffffffff 00000000 c0d22ac4 ee64a220 ee62ed10 c0d22abc
[ 1.330614] 7c40: ffffffff 00000003 c0d22ac4 00000000 ee64a220 c07ca62c 00000000 00000000
[ 1.338784] 7c60: ee62ca80 ee64a200 c0d22ac4 00000000 ee64a200 00000021 ee62ea10 c07d8fb0
[ 1.346954] 7c80: 00000000 00000000 ee62ca80 c07a7c24 00000042 eefd9a34 ee62e9c0 c0d22d10
[ 1.355124] 7ca0: ee64a204 ee64a200 ee64a220 c07d8e90 00000000 c145ad98 0000011e c099b888
[ 1.363294] 7cc0: ee64a220 c145ad90 00000000 c13b5fa8 00000000 c079d77c c13b5fa8 00000000
[ 1.371464] 7ce0: ee64a37c 00000000 ee64a220 ee067d28 ee067d08 c079d8ec 00000000 00000000
[ 1.379634] 7d00: 00000000 c079bc78 ee166870 ee59fd38 ee64a220 ee64a220 ee64a254 00000001
[ 1.387804] 7d20: c145ad6c c079daa0 ee64a220 00000001 ee64a220 ee64a220 ee64a220 c13c8ca0
[ 1.395974] 7d40: c145ad6c c079c7bc ee64a220 ee64a228 ee5f6038 c079b334 c145ad6c c079a5b8
[ 1.404144] 7d60: ee64a200 ee067db0 ee64a200 ee067db0 ee5f6010 ee64a220 ee64a200 00000000
[ 1.412314] 7d80: ee64a204 c099c95c eefd9a34 c0a29e9c eefd9a34 eefd9a34 ee067db0 ee067ddc
[ 1.420483] 7da0: ee5f6010 00000000 c145ad98 c099ccac 30386b72 00000038 00000000 00000000
[ 1.428653] 7dc0: 00000000 001b0080 00000000 ee067ddc eefd9a34 00000000 00000000 00000000
[ 1.436823] 7de0: 00000000 00000000 00000000 00000004 eefd9a34 00000000 ee5f6010 eefd9a34
[ 1.444993] 7e00: ee5f6038 c099d090 00000000 ee5f621c ee5f6010 ee193010 ee5f6240 00000000
[ 1.453162] 7e20: 00000000 c09a917c 00000000 ee178680 ee5f6010 ee193010 ee193010 c09a8f68
[ 1.461333] 7e40: c13c9344 c13c9330 00000000 c079eef0 ee193010 c145ad90 00000000 c13c9344
[ 1.469502] 7e60: 00000000 c079d77c c11a6034 c0a29d84 ee19316c 00000000 ee193000 ee193010
[ 1.477672] 7e80: c13c9344 ee193044 00000000 c110072c c11a6034 c079d8e8 c13c9344 c079d844
[ 1.485842] 7ea0: ee067ea8 c079bd18 ee04bf5c ee1756b4 00000007 c13c9344 ee624e80 c13b15b8
[ 1.494012] 7ec0: 00000000 c079c58c c0f8a70c c11437f0 c13c9344 c13c9344 00000000 c1143800
[ 1.502182] 7ee0: 00000007 c079df40 c11a602c 00000000 c1143800 c0301ecc 00000023 c1010978
[ 1.510352] 7f00: 0000002d ee067f20 c035cf00 c05ab5dc 20000013 ffffffff 00000051 c1336720
[ 1.518521] 7f20: efffcc0b efffcbfc efffcc0b c035d574 00000000 c0f833e0 c10106bc 00000000
[ 1.526692] 7f40: 00000006 00000006 c13366e8 c11a602c c120ec4c c141b000 00000007 c110072c
[ 1.534861] 7f60: 00000000 c11a6034 0000011e c1100654 00000006 00000006 00000000 c110072c
[ 1.543031] 7f80: c0b99714 00000000 c0b99714 00000000 00000000 00000000 00000000 00000000
[ 1.551201] 7fa0: 00000000 c0b9971c 00000000 c03083f8 00000000 00000000 00000000 00000000
[ 1.559371] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.567540] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 1.575716] [<c06aed10>] (regulator_map_voltage_linear) from [<c06ab374>] (regulator_map_voltage+0x1c/0x5c)
[ 1.585447] [<c06ab374>] (regulator_map_voltage) from [<c06ab4a4>] (_regulator_do_set_voltage+0xf0/0x368)
[ 1.595005] [<c06ab4a4>] (_regulator_do_set_voltage) from [<c06acab4>] (regulator_register+0xb10/0x1038)
[ 1.604476] [<c06acab4>] (regulator_register) from [<c06af258>] (devm_regulator_register+0x40/0x74)
[ 1.613515] [<c06af258>] (devm_regulator_register) from [<c06b9704>] (rk808_regulator_probe+0x190/0x228)
[ 1.622988] [<c06b9704>] (rk808_regulator_probe) from [<c079eef0>] (platform_drv_probe+0x54/0xa4)
[ 1.631853] [<c079eef0>] (platform_drv_probe) from [<c079d77c>] (driver_probe_device+0x1f8/0x2c0)
[ 1.640718] [<c079d77c>] (driver_probe_device) from [<c079bc78>] (bus_for_each_drv+0x60/0x8c)
[ 1.649235] [<c079bc78>] (bus_for_each_drv) from [<c079daa0>] (__device_attach+0x9c/0xfc)
[ 1.657406] [<c079daa0>] (__device_attach) from [<c079c7bc>] (bus_probe_device+0x84/0x8c)
[ 1.665577] [<c079c7bc>] (bus_probe_device) from [<c079b334>] (device_add+0x34c/0x514)
[ 1.673489] [<c079b334>] (device_add) from [<c079f140>] (platform_device_add+0x170/0x218)
[ 1.681661] [<c079f140>] (platform_device_add) from [<c07ca2c4>] (mfd_add_device+0x25c/0x32c)
[ 1.690180] [<c07ca2c4>] (mfd_add_device) from [<c07ca578>] (mfd_add_devices+0xac/0xf8)
[ 1.698177] [<c07ca578>] (mfd_add_devices) from [<c07ca62c>] (devm_mfd_add_devices+0x68/0x9c)
[ 1.706695] [<c07ca62c>] (devm_mfd_add_devices) from [<c07d8fb0>] (rk808_probe+0x120/0x1f0)
[ 1.715040] [<c07d8fb0>] (rk808_probe) from [<c099b888>] (i2c_device_probe+0x19c/0x21c)
[ 1.723038] [<c099b888>] (i2c_device_probe) from [<c079d77c>] (driver_probe_device+0x1f8/0x2c0)
[ 1.731728] [<c079d77c>] (driver_probe_device) from [<c079bc78>] (bus_for_each_drv+0x60/0x8c)
[ 1.740246] [<c079bc78>] (bus_for_each_drv) from [<c079daa0>] (__device_attach+0x9c/0xfc)
[ 1.748416] [<c079daa0>] (__device_attach) from [<c079c7bc>] (bus_probe_device+0x84/0x8c)
[ 1.756587] [<c079c7bc>] (bus_probe_device) from [<c079b334>] (device_add+0x34c/0x514)
[ 1.764498] [<c079b334>] (device_add) from [<c099c95c>] (i2c_new_device+0x11c/0x190)
[ 1.772236] [<c099c95c>] (i2c_new_device) from [<c099ccac>] (of_i2c_register_device+0x120/0x1bc)
[ 1.781013] [<c099ccac>] (of_i2c_register_device) from [<c099d090>] (i2c_register_adapter+0x19c/0x354)
[ 1.790312] [<c099d090>] (i2c_register_adapter) from [<c09a917c>] (rk3x_i2c_probe+0x214/0x314)
[ 1.798915] [<c09a917c>] (rk3x_i2c_probe) from [<c079eef0>] (platform_drv_probe+0x54/0xa4)
[ 1.807172] [<c079eef0>] (platform_drv_probe) from [<c079d77c>] (driver_probe_device+0x1f8/0x2c0)
[ 1.816035] [<c079d77c>] (driver_probe_device) from [<c079d8e8>] (__driver_attach+0xa4/0xa8)
[ 1.824465] [<c079d8e8>] (__driver_attach) from [<c079bd18>] (bus_for_each_dev+0x74/0x98)
[ 1.832637] [<c079bd18>] (bus_for_each_dev) from [<c079c58c>] (bus_add_driver+0x170/0x1f4)
[ 1.840894] [<c079c58c>] (bus_add_driver) from [<c079df40>] (driver_register+0x78/0xf8)
[ 1.848892] [<c079df40>] (driver_register) from [<c0301ecc>] (do_one_initcall+0x40/0x178)
[ 1.857065] [<c0301ecc>] (do_one_initcall) from [<c1100654>] (kernel_init_freeable+0x114/0x1ec)
[ 1.865758] [<c1100654>] (kernel_init_freeable) from [<c0b9971c>] (kernel_init+0x8/0x118)
[ 1.873930] [<c0b9971c>] (kernel_init) from [<c03083f8>] (ret_from_fork+0x14/0x3c)
[ 1.881494] Code: e3540000 01a03005 0affffe4 eaffffed (e7f001f2)
[ 1.887587] ---[ end trace 5b1e9b1610f54a8c ]---
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
2016-04-26 19:33 ` [rtc-linux] " Heiko Stübner
(?)
@ 2016-04-27 6:35 ` Wadim Egorov
-1 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-27 6:35 UTC (permalink / raw)
To: Heiko Stübner, linux-rockchip, Mark Brown
Cc: mark.rutland, devicetree, a.zummo, pawel.moll, rtc-linux,
ijc+devicetree, mturquette, sboyd, linux-kernel, robh+dt,
lgirdwood, alexandre.belloni, dianders, galak, zyw, lee.jones,
linux-clk
On 26.04.2016 21:33, Heiko Stübner wrote:
> Am Montag, 25. April 2016, 18:56:54 schrieb Mark Brown:
>> The patch
>>
>> regulator: rk808: remove linear range definitions with a single range
>>
>> has been applied to the regulator tree at
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
> with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on
> rk3288-veyron devices with the bug below. Reverting this one patch
> results in the system booting again:
>
This is because I missed to add the correct ops for LDO_REG3 in this patch.
^ permalink raw reply [flat|nested] 57+ messages in thread
* [rtc-linux] Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-27 6:35 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-27 6:35 UTC (permalink / raw)
To: Heiko Stübner, linux-rockchip, Mark Brown
Cc: mark.rutland, devicetree, a.zummo, pawel.moll, rtc-linux,
ijc+devicetree, mturquette, sboyd, linux-kernel, robh+dt,
lgirdwood, alexandre.belloni, dianders, galak, zyw, lee.jones,
linux-clk
On 26.04.2016 21:33, Heiko St=C3=BCbner wrote:
> Am Montag, 25. April 2016, 18:56:54 schrieb Mark Brown:
>> The patch
>>
>> regulator: rk808: remove linear range definitions with a single range
>>
>> has been applied to the regulator tree at
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
> with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on=20
> rk3288-veyron devices with the bug below. Reverting this one patch
> results in the system booting again:
>
This is because I missed to add the correct ops for LDO_REG3 in this patch.
--=20
--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-27 6:35 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-27 6:35 UTC (permalink / raw)
To: Heiko Stübner, linux-rockchip, Mark Brown
Cc: mark.rutland, devicetree, a.zummo, pawel.moll, rtc-linux,
ijc+devicetree, mturquette, sboyd, linux-kernel, robh+dt,
lgirdwood, alexandre.belloni, dianders, galak, zyw, lee.jones,
linux-clk
On 26.04.2016 21:33, Heiko St=FCbner wrote:
> Am Montag, 25. April 2016, 18:56:54 schrieb Mark Brown:
>> The patch
>>
>> regulator: rk808: remove linear range definitions with a single range
>>
>> has been applied to the regulator tree at
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
> with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on=20
> rk3288-veyron devices with the bug below. Reverting this one patch
> results in the system booting again:
>
This is because I missed to add the correct ops for LDO=5FREG3 in this patc=
h.
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
2016-04-27 6:35 ` [rtc-linux] " Wadim Egorov
(?)
@ 2016-04-27 13:50 ` Mark Brown
-1 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-27 13:50 UTC (permalink / raw)
To: Wadim Egorov
Cc: Heiko Stübner, linux-rockchip, mark.rutland, devicetree,
a.zummo, pawel.moll, rtc-linux, ijc+devicetree, mturquette,
sboyd, linux-kernel, robh+dt, lgirdwood, alexandre.belloni,
dianders, galak, zyw, lee.jones, linux-clk
[-- Attachment #1: Type: text/plain, Size: 417 bytes --]
On Wed, Apr 27, 2016 at 08:35:46AM +0200, Wadim Egorov wrote:
> On 26.04.2016 21:33, Heiko Stübner wrote:
> > with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on
> > rk3288-veyron devices with the bug below. Reverting this one patch
> > results in the system booting again:
> This is because I missed to add the correct ops for LDO_REG3 in this patch.
Any ETA on a fix or should I revert?
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* [rtc-linux] Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-27 13:50 ` Mark Brown
0 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-27 13:50 UTC (permalink / raw)
To: Wadim Egorov
Cc: Heiko Stübner, linux-rockchip, mark.rutland, devicetree,
a.zummo, pawel.moll, rtc-linux, ijc+devicetree, mturquette,
sboyd, linux-kernel, robh+dt, lgirdwood, alexandre.belloni,
dianders, galak, zyw, lee.jones, linux-clk
[-- Attachment #1: Type: text/plain, Size: 948 bytes --]
On Wed, Apr 27, 2016 at 08:35:46AM +0200, Wadim Egorov wrote:
> On 26.04.2016 21:33, Heiko Stübner wrote:
> > with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on
> > rk3288-veyron devices with the bug below. Reverting this one patch
> > results in the system booting again:
> This is because I missed to add the correct ops for LDO_REG3 in this patch.
Any ETA on a fix or should I revert?
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-27 13:50 ` Mark Brown
0 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-27 13:50 UTC (permalink / raw)
To: Wadim Egorov
Cc: mark.rutland-5wv7dgnIgG8, a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
dianders-F7+t8E8rja9g9hUCZPvPmw, Heiko Stübner,
pawel.moll-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA,
mturquette-rdvid1DuHRBWk0Htik3J/w,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, zyw-TNX95d0MmH7DzftRWevZcw,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
galak-sgV2jX0FEOL9JmXXK+q4OQ, rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
lee.jones-QSEj5FYQhm4dnm+yROfE0A,
linux-clk-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1.1: Type: text/plain, Size: 417 bytes --]
On Wed, Apr 27, 2016 at 08:35:46AM +0200, Wadim Egorov wrote:
> On 26.04.2016 21:33, Heiko Stübner wrote:
> > with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on
> > rk3288-veyron devices with the bug below. Reverting this one patch
> > results in the system booting again:
> This is because I missed to add the correct ops for LDO_REG3 in this patch.
Any ETA on a fix or should I revert?
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
[-- Attachment #2: Type: text/plain, Size: 200 bytes --]
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
2016-04-27 13:50 ` [rtc-linux] " Mark Brown
(?)
(?)
@ 2016-04-27 13:56 ` Heiko Stübner
-1 siblings, 0 replies; 57+ messages in thread
From: Heiko Stübner @ 2016-04-27 13:56 UTC (permalink / raw)
To: Mark Brown
Cc: Wadim Egorov, linux-rockchip, mark.rutland, devicetree, a.zummo,
pawel.moll, rtc-linux, ijc+devicetree, mturquette, sboyd,
linux-kernel, robh+dt, lgirdwood, alexandre.belloni, dianders,
galak, zyw, lee.jones, linux-clk
Am Mittwoch, 27. April 2016, 14:50:48 schrieb Mark Brown:
> On Wed, Apr 27, 2016 at 08:35:46AM +0200, Wadim Egorov wrote:
> > On 26.04.2016 21:33, Heiko Stübner wrote:
> > > with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on
> > > rk3288-veyron devices with the bug below. Reverting this one patch
> >
> > > results in the system booting again:
> > This is because I missed to add the correct ops for LDO_REG3 in this
> > patch.
>
> Any ETA on a fix or should I revert?
I guess
[PATCH v4 1/7] regulator: rk808: Add rk808_reg_ops_ranges for LDO3
from yesterday [0] might be the fix? At least it fits Wadim's description above
but I haven't had time to test it yet.
[0] https://patchwork.kernel.org/patch/8939741/
^ permalink raw reply [flat|nested] 57+ messages in thread
* [rtc-linux] Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-27 13:56 ` Heiko Stübner
0 siblings, 0 replies; 57+ messages in thread
From: Heiko Stübner @ 2016-04-27 13:56 UTC (permalink / raw)
To: Mark Brown
Cc: Wadim Egorov, linux-rockchip, mark.rutland, devicetree, a.zummo,
pawel.moll, rtc-linux, ijc+devicetree, mturquette, sboyd,
linux-kernel, robh+dt, lgirdwood, alexandre.belloni, dianders,
galak, zyw, lee.jones, linux-clk
Am Mittwoch, 27. April 2016, 14:50:48 schrieb Mark Brown:
> On Wed, Apr 27, 2016 at 08:35:46AM +0200, Wadim Egorov wrote:
> > On 26.04.2016 21:33, Heiko St=C3=BCbner wrote:
> > > with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on
> > > rk3288-veyron devices with the bug below. Reverting this one patch
> >=20
> > > results in the system booting again:
> > This is because I missed to add the correct ops for LDO_REG3 in this
> > patch.
>=20
> Any ETA on a fix or should I revert?
I guess
[PATCH v4 1/7] regulator: rk808: Add rk808_reg_ops_ranges for LDO3
from yesterday [0] might be the fix? At least it fits Wadim's description a=
bove=20
but I haven't had time to test it yet.
[0] https://patchwork.kernel.org/patch/8939741/
--=20
--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-27 13:56 ` Heiko Stübner
0 siblings, 0 replies; 57+ messages in thread
From: Heiko Stübner @ 2016-04-27 13:56 UTC (permalink / raw)
To: Mark Brown
Cc: mark.rutland-5wv7dgnIgG8, a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
dianders-F7+t8E8rja9g9hUCZPvPmw,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw, pawel.moll-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
mturquette-rdvid1DuHRBWk0Htik3J/w,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
galak-sgV2jX0FEOL9JmXXK+q4OQ, zyw-TNX95d0MmH7DzftRWevZcw,
Wadim Egorov, lee.jones-QSEj5FYQhm4dnm+yROfE0A,
linux-clk-u79uwXL29TY76Z2rM5mHXA
Am Mittwoch, 27. April 2016, 14:50:48 schrieb Mark Brown:
> On Wed, Apr 27, 2016 at 08:35:46AM +0200, Wadim Egorov wrote:
> > On 26.04.2016 21:33, Heiko Stübner wrote:
> > > with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on
> > > rk3288-veyron devices with the bug below. Reverting this one patch
> >
> > > results in the system booting again:
> > This is because I missed to add the correct ops for LDO_REG3 in this
> > patch.
>
> Any ETA on a fix or should I revert?
I guess
[PATCH v4 1/7] regulator: rk808: Add rk808_reg_ops_ranges for LDO3
from yesterday [0] might be the fix? At least it fits Wadim's description above
but I haven't had time to test it yet.
[0] https://patchwork.kernel.org/patch/8939741/
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-27 13:56 ` Heiko Stübner
0 siblings, 0 replies; 57+ messages in thread
From: Heiko Stübner @ 2016-04-27 13:56 UTC (permalink / raw)
To: Mark Brown
Cc: Wadim Egorov, linux-rockchip, mark.rutland, devicetree, a.zummo,
pawel.moll, rtc-linux, ijc+devicetree, mturquette, sboyd,
linux-kernel, robh+dt, lgirdwood, alexandre.belloni, dianders,
galak, zyw, lee.jones, linux-clk
Am Mittwoch, 27. April 2016, 14:50:48 schrieb Mark Brown:
> On Wed, Apr 27, 2016 at 08:35:46AM +0200, Wadim Egorov wrote:
> > On 26.04.2016 21:33, Heiko St=FCbner wrote:
> > > with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on=
> > > rk3288-veyron devices with the bug below. Reverting this one patc=
h
> >=20
> > > results in the system booting again:
> > This is because I missed to add the correct ops for LDO_REG3 in thi=
s
> > patch.
>=20
> Any ETA on a fix or should I revert?
I guess
=09[PATCH v4 1/7] regulator: rk808: Add rk808_reg_ops_ranges for LDO3
from yesterday [0] might be the fix? At least it fits Wadim's descripti=
on above=20
but I haven't had time to test it yet.
[0] https://patchwork.kernel.org/patch/8939741/
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
2016-04-27 13:50 ` [rtc-linux] " Mark Brown
(?)
@ 2016-04-27 14:06 ` Wadim Egorov
-1 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-27 14:06 UTC (permalink / raw)
To: Mark Brown
Cc: Heiko Stübner, linux-rockchip, mark.rutland, devicetree,
a.zummo, pawel.moll, rtc-linux, ijc+devicetree, mturquette,
sboyd, linux-kernel, robh+dt, lgirdwood, alexandre.belloni,
dianders, galak, zyw, lee.jones, linux-clk
On 27.04.2016 15:50, Mark Brown wrote:
> On Wed, Apr 27, 2016 at 08:35:46AM +0200, Wadim Egorov wrote:
>> On 26.04.2016 21:33, Heiko Stübner wrote:
>>> with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on
>>> rk3288-veyron devices with the bug below. Reverting this one patch
>>> results in the system booting again:
>> This is because I missed to add the correct ops for LDO_REG3 in this patch.
> Any ETA on a fix or should I revert?
this patch
http://lists.infradead.org/pipermail/linux-rockchip/2016-April/008674.html
will fix the issue.
The regulator patches from v4 are based on top of
commit 4a5ed8c1adc3 ("regulator: rk808: remove unused rk808_reg_ops_ranges")
^ permalink raw reply [flat|nested] 57+ messages in thread
* [rtc-linux] Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-27 14:06 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-27 14:06 UTC (permalink / raw)
To: Mark Brown
Cc: Heiko Stübner, linux-rockchip, mark.rutland, devicetree,
a.zummo, pawel.moll, rtc-linux, ijc+devicetree, mturquette,
sboyd, linux-kernel, robh+dt, lgirdwood, alexandre.belloni,
dianders, galak, zyw, lee.jones, linux-clk
On 27.04.2016 15:50, Mark Brown wrote:
> On Wed, Apr 27, 2016 at 08:35:46AM +0200, Wadim Egorov wrote:
>> On 26.04.2016 21:33, Heiko St=C3=BCbner wrote:
>>> with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on=20
>>> rk3288-veyron devices with the bug below. Reverting this one patch
>>> results in the system booting again:
>> This is because I missed to add the correct ops for LDO_REG3 in this pat=
ch.
> Any ETA on a fix or should I revert?
this patch
http://lists.infradead.org/pipermail/linux-rockchip/2016-April/008674.html
will fix the issue.
The regulator patches from v4 are based on top of
commit 4a5ed8c1adc3 ("regulator: rk808: remove unused rk808_reg_ops_ranges"=
)
--=20
--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-27 14:06 ` Wadim Egorov
0 siblings, 0 replies; 57+ messages in thread
From: Wadim Egorov @ 2016-04-27 14:06 UTC (permalink / raw)
To: Mark Brown
Cc: Heiko Stübner, linux-rockchip, mark.rutland, devicetree,
a.zummo, pawel.moll, rtc-linux, ijc+devicetree, mturquette,
sboyd, linux-kernel, robh+dt, lgirdwood, alexandre.belloni,
dianders, galak, zyw, lee.jones, linux-clk
On 27.04.2016 15:50, Mark Brown wrote:
> On Wed, Apr 27, 2016 at 08:35:46AM +0200, Wadim Egorov wrote:
>> On 26.04.2016 21:33, Heiko St=FCbner wrote:
>>> with this patch applied, 4.6.0-rc5-next-20160426 fails to boot on=20
>>> rk3288-veyron devices with the bug below. Reverting this one patch
>>> results in the system booting again:
>> This is because I missed to add the correct ops for LDO=5FREG3 in this p=
atch.
> Any ETA on a fix or should I revert?
this patch
http://lists.infradead.org/pipermail/linux-rockchip/2016-April/008674.html
will fix the issue.
The regulator patches from v4 are based on top of
commit 4a5ed8c1adc3 ("regulator: rk808: remove unused rk808=5Freg=5Fops=5Fr=
anges")
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
2016-04-27 13:56 ` [rtc-linux] " Heiko Stübner
(?)
@ 2016-04-27 16:41 ` Mark Brown
-1 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-27 16:41 UTC (permalink / raw)
To: Heiko Stübner
Cc: Wadim Egorov, linux-rockchip, mark.rutland, devicetree, a.zummo,
pawel.moll, rtc-linux, ijc+devicetree, mturquette, sboyd,
linux-kernel, robh+dt, lgirdwood, alexandre.belloni, dianders,
galak, zyw, lee.jones, linux-clk
[-- Attachment #1: Type: text/plain, Size: 451 bytes --]
On Wed, Apr 27, 2016 at 03:56:56PM +0200, Heiko Stübner wrote:
> Am Mittwoch, 27. April 2016, 14:50:48 schrieb Mark Brown:
> > Any ETA on a fix or should I revert?
> I guess
> [PATCH v4 1/7] regulator: rk808: Add rk808_reg_ops_ranges for LDO3
> from yesterday [0] might be the fix? At least it fits Wadim's description above
> but I haven't had time to test it yet.
Oh, probably yeah. It's easier if fixes are pulled out of serieses.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* [rtc-linux] Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-27 16:41 ` Mark Brown
0 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-27 16:41 UTC (permalink / raw)
To: Heiko Stübner
Cc: Wadim Egorov, linux-rockchip, mark.rutland, devicetree, a.zummo,
pawel.moll, rtc-linux, ijc+devicetree, mturquette, sboyd,
linux-kernel, robh+dt, lgirdwood, alexandre.belloni, dianders,
galak, zyw, lee.jones, linux-clk
[-- Attachment #1: Type: text/plain, Size: 982 bytes --]
On Wed, Apr 27, 2016 at 03:56:56PM +0200, Heiko Stübner wrote:
> Am Mittwoch, 27. April 2016, 14:50:48 schrieb Mark Brown:
> > Any ETA on a fix or should I revert?
> I guess
> [PATCH v4 1/7] regulator: rk808: Add rk808_reg_ops_ranges for LDO3
> from yesterday [0] might be the fix? At least it fits Wadim's description above
> but I haven't had time to test it yet.
Oh, probably yeah. It's easier if fixes are pulled out of serieses.
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree
@ 2016-04-27 16:41 ` Mark Brown
0 siblings, 0 replies; 57+ messages in thread
From: Mark Brown @ 2016-04-27 16:41 UTC (permalink / raw)
To: Heiko Stübner
Cc: mark.rutland-5wv7dgnIgG8, a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
dianders-F7+t8E8rja9g9hUCZPvPmw,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw, pawel.moll-5wv7dgnIgG8,
devicetree-u79uwXL29TY76Z2rM5mHXA,
mturquette-rdvid1DuHRBWk0Htik3J/w,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
galak-sgV2jX0FEOL9JmXXK+q4OQ, zyw-TNX95d0MmH7DzftRWevZcw,
Wadim Egorov, lee.jones-QSEj5FYQhm4dnm+yROfE0A,
linux-clk-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1.1: Type: text/plain, Size: 451 bytes --]
On Wed, Apr 27, 2016 at 03:56:56PM +0200, Heiko Stübner wrote:
> Am Mittwoch, 27. April 2016, 14:50:48 schrieb Mark Brown:
> > Any ETA on a fix or should I revert?
> I guess
> [PATCH v4 1/7] regulator: rk808: Add rk808_reg_ops_ranges for LDO3
> from yesterday [0] might be the fix? At least it fits Wadim's description above
> but I haven't had time to test it yet.
Oh, probably yeah. It's easier if fixes are pulled out of serieses.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
[-- Attachment #2: Type: text/plain, Size: 200 bytes --]
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 57+ messages in thread
end of thread, other threads:[~2016-04-27 16:41 UTC | newest]
Thread overview: 57+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-25 13:20 [PATCH v3 0/8] Add support for rk818 Wadim Egorov
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
2016-04-25 13:20 ` [PATCH v3 1/8] drivers: mfd: rk808: rename rk808 struct to rk8xx Wadim Egorov
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
2016-04-25 13:20 ` [PATCH v3 2/8] mfd: RK808: Add RK818 support Wadim Egorov
2016-04-25 13:20 ` Wadim Egorov
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
2016-04-25 13:20 ` [PATCH v3 3/8] regulator: rk808: remove linear range definitions with a single range Wadim Egorov
2016-04-25 13:20 ` Wadim Egorov
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
2016-04-25 17:56 ` Applied "regulator: rk808: remove linear range definitions with a single range" to the regulator tree Mark Brown
2016-04-25 17:56 ` Mark Brown
2016-04-25 17:56 ` Mark Brown
2016-04-25 17:56 ` [rtc-linux] " Mark Brown
2016-04-26 19:33 ` Heiko Stübner
2016-04-26 19:33 ` [rtc-linux] " Heiko Stübner
2016-04-27 6:35 ` Wadim Egorov
2016-04-27 6:35 ` Wadim Egorov
2016-04-27 6:35 ` [rtc-linux] " Wadim Egorov
2016-04-27 13:50 ` Mark Brown
2016-04-27 13:50 ` Mark Brown
2016-04-27 13:50 ` [rtc-linux] " Mark Brown
2016-04-27 13:56 ` Heiko Stübner
2016-04-27 13:56 ` Heiko Stübner
2016-04-27 13:56 ` Heiko Stübner
2016-04-27 13:56 ` [rtc-linux] " Heiko Stübner
2016-04-27 16:41 ` Mark Brown
2016-04-27 16:41 ` Mark Brown
2016-04-27 16:41 ` [rtc-linux] " Mark Brown
2016-04-27 14:06 ` Wadim Egorov
2016-04-27 14:06 ` Wadim Egorov
2016-04-27 14:06 ` [rtc-linux] " Wadim Egorov
2016-04-26 10:46 ` [PATCH v3 3/8] regulator: rk808: remove linear range definitions with a single range Mark Brown
2016-04-26 10:46 ` [rtc-linux] " Mark Brown
2016-04-25 13:20 ` [PATCH v3 4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code Wadim Egorov
2016-04-25 13:20 ` Wadim Egorov
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
2016-04-25 17:39 ` Mark Brown
2016-04-25 17:39 ` [rtc-linux] " Mark Brown
2016-04-26 7:45 ` Wadim Egorov
2016-04-26 7:45 ` Wadim Egorov
2016-04-26 7:45 ` [rtc-linux] " Wadim Egorov
2016-04-26 8:17 ` Heiko Stübner
2016-04-26 8:17 ` [rtc-linux] " Heiko Stübner
2016-04-26 8:46 ` Wadim Egorov
2016-04-26 8:46 ` Wadim Egorov
2016-04-26 8:46 ` [rtc-linux] " Wadim Egorov
2016-04-25 13:20 ` [PATCH v3 5/8] regulator: rk808: Add regulator driver for RK818 Wadim Egorov
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
2016-04-25 13:20 ` [PATCH v3 6/8] mfd: dt-bindings: Add RK818 device tree bindings document Wadim Egorov
2016-04-25 13:20 ` Wadim Egorov
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
2016-04-25 13:20 ` [PATCH v3 7/8] clk: Kconfig: Name RK818 in Kconfig for COMMON_CLK_RK808 Wadim Egorov
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
2016-04-25 13:20 ` [PATCH v3 8/8] rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808 Wadim Egorov
2016-04-25 13:20 ` Wadim Egorov
2016-04-25 13:20 ` [rtc-linux] " Wadim Egorov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.