[PATCH 00/10] Get MUSB PM runtime working again

[PATCH 00/10] Get MUSB PM runtime working again

[Tony Lindgren]

Hi all,

Here's a series of fixes to get MUSB PM runtime working again.

I can now test PM runtime with the 2430 glue layer with this set,
so adding PM runtime support for other glue layers should be
possible.

Regards,

Tony


Tony Lindgren (10):
  usb: phy: Fix initial state for twl6030
  usb: musb: Fix idling after host mode by increasing autosuspend delay
  usb: musb: Fix PM runtime handling for connected cable
  usb: musb: Remove unnecessary shutdown function
  usb: musb: Fix PM runtime autosuspend
  usb: musb: Split PM runtime between wrapper IP and musb core
  usb: musb: Manage USB phy from PM runtime calls
  usb: musb: Remove try_idle for 2430 glue layer
  usb: musb: Fix PM runtime with delayed work
  usb: musb: Remove pm_runtime_set_irq_safe

 drivers/usb/musb/musb_core.c      |  67 ++++++----------
 drivers/usb/musb/musb_core.h      |   1 +
 drivers/usb/musb/musb_gadget.c    |  26 +++++--
 drivers/usb/musb/omap2430.c       | 155 +++++++++-----------------------------
 drivers/usb/phy/phy-twl6030-usb.c |  17 ++++-
 5 files changed, 93 insertions(+), 173 deletions(-)

-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 01/10] usb: phy: Fix initial state for twl6030

[Tony Lindgren]

We need to check the state for the PHY with delayed_work so
as otherwise MUSB will get confused and idles immediately.

Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/phy/phy-twl6030-usb.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 014dbbd7..8696736 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -97,6 +97,9 @@ struct twl6030_usb {
 
 	struct regulator		*usb3v3;
 
+	/* used to check initial cable status after probe */
+	struct delayed_work	get_status_work;
+
 	/* used to set vbus, in atomic path */
 	struct work_struct	set_vbus_work;
 
@@ -274,6 +277,15 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 	return IRQ_HANDLED;
 }
 
+static void twl6030_status_work(struct work_struct *work)
+{
+	struct twl6030_usb *twl = container_of(work, struct twl6030_usb,
+					       get_status_work.work);
+
+	twl6030_usb_irq(twl->irq2, twl);
+	twl6030_usbotg_irq(twl->irq1, twl);
+}
+
 static int twl6030_enable_irq(struct twl6030_usb *twl)
 {
 	twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
@@ -284,8 +296,6 @@ static int twl6030_enable_irq(struct twl6030_usb *twl)
 				REG_INT_MSK_LINE_C);
 	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
 				REG_INT_MSK_STS_C);
-	twl6030_usb_irq(twl->irq2, twl);
-	twl6030_usbotg_irq(twl->irq1, twl);
 
 	return 0;
 }
@@ -371,6 +381,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "could not create sysfs file\n");
 
 	INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
+	INIT_DELAYED_WORK(&twl->get_status_work, twl6030_status_work);
 
 	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
@@ -395,6 +406,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
 
 	twl->asleep = 0;
 	twl6030_enable_irq(twl);
+	schedule_delayed_work(&twl->get_status_work, HZ);
 	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
 
 	return 0;
@@ -404,6 +416,7 @@ static int twl6030_usb_remove(struct platform_device *pdev)
 {
 	struct twl6030_usb *twl = platform_get_drvdata(pdev);
 
+	cancel_delayed_work(&twl->get_status_work);
 	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
 		REG_INT_MSK_LINE_C);
 	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 02/10] usb: musb: Fix idling after host mode by increasing autosuspend delay

[Tony Lindgren]

Looks like at least 2430 glue won't idle reliably with the 200 ms
autosuspend delay. This causes deeper idle states being blocked for
the whole SoC when disconnecting OTG A cable.

Increasing the delay to 500 ms seems to idle both MUSB and the PHY
reliably. This is probably because of time needed by the hardware
based negotiation between MUSB and the PHY.

Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/musb/musb_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 39fd958..5fa6187 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2030,7 +2030,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
 	/* We need musb_read/write functions initialized for PM */
 	pm_runtime_use_autosuspend(musb->controller);
-	pm_runtime_set_autosuspend_delay(musb->controller, 200);
+	pm_runtime_set_autosuspend_delay(musb->controller, 500);
 	pm_runtime_enable(musb->controller);
 
 	/* The musb_platform_init() call:
-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 03/10] usb: musb: Fix PM runtime handling for connected cable

[Tony Lindgren]

We may have drivers loaded but no configured gadgets
and MUSB may be in host mode. If gadgets are configured
during host mode, PM runtime will get confused.

Disconnect PM runtime from gadget state, and do it only
based on the cable.

Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/musb/omap2430.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c84e0322..9d3645f 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -259,6 +259,13 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 	struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev);
 	struct omap_musb_board_data *data = pdata->board_data;
 	struct usb_otg *otg = musb->xceiv->otg;
+	bool cable_connected;
+
+	cable_connected = ((glue->status & MUSB_ID_GROUND) ||
+			   (glue->status & MUSB_VBUS_VALID));
+
+	if (cable_connected)
+		pm_runtime_get_sync(dev);
 
 	switch (glue->status) {
 	case MUSB_ID_GROUND:
@@ -268,7 +275,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		musb->xceiv->otg->state = OTG_STATE_A_IDLE;
 		musb->xceiv->last_event = USB_EVENT_ID;
 		if (musb->gadget_driver) {
-			pm_runtime_get_sync(dev);
 			omap_control_usb_set_mode(glue->control_otghs,
 				USB_MODE_HOST);
 			omap2430_musb_set_vbus(musb, 1);
@@ -281,8 +287,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		otg->default_a = false;
 		musb->xceiv->otg->state = OTG_STATE_B_IDLE;
 		musb->xceiv->last_event = USB_EVENT_VBUS;
-		if (musb->gadget_driver)
-			pm_runtime_get_sync(dev);
 		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
 		break;
 
@@ -291,11 +295,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		dev_dbg(dev, "VBUS Disconnect\n");
 
 		musb->xceiv->last_event = USB_EVENT_NONE;
-		if (musb->gadget_driver) {
+		if (musb->gadget_driver)
 			omap2430_musb_set_vbus(musb, 0);
-			pm_runtime_mark_last_busy(dev);
-			pm_runtime_put_autosuspend(dev);
-		}
 
 		if (data->interface_type == MUSB_INTERFACE_UTMI)
 			otg_set_vbus(musb->xceiv->otg, 0);
@@ -307,6 +308,11 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		dev_dbg(dev, "ID float\n");
 	}
 
+	if (!cable_connected) {
+		pm_runtime_mark_last_busy(dev);
+		pm_runtime_put_autosuspend(dev);
+	}
+
 	atomic_notifier_call_chain(&musb->xceiv->notifier,
 			musb->xceiv->last_event, NULL);
 }
-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 04/10] usb: musb: Remove unnecessary shutdown function

[Tony Lindgren]

We have remove() already calling shutdown(), so let's drop it
and move the code to remove().

Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/musb/musb_core.c | 39 ++++++++++++++-------------------------
 1 file changed, 14 insertions(+), 25 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 5fa6187..d7af8ed 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1090,29 +1090,6 @@ void musb_stop(struct musb *musb)
 	musb_platform_try_idle(musb, 0);
 }
 
-static void musb_shutdown(struct platform_device *pdev)
-{
-	struct musb	*musb = dev_to_musb(&pdev->dev);
-	unsigned long	flags;
-
-	pm_runtime_get_sync(musb->controller);
-
-	musb_host_cleanup(musb);
-	musb_gadget_cleanup(musb);
-
-	spin_lock_irqsave(&musb->lock, flags);
-	musb_platform_disable(musb);
-	musb_generic_disable(musb);
-	spin_unlock_irqrestore(&musb->lock, flags);
-
-	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
-	musb_platform_exit(musb);
-
-	pm_runtime_put(musb->controller);
-	/* FIXME power down */
-}
-
-
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -2312,6 +2289,7 @@ static int musb_remove(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
 
 	/* this gets called on rmmod.
 	 *  - Host mode: host may still be active
@@ -2319,7 +2297,19 @@ static int musb_remove(struct platform_device *pdev)
 	 *  - OTG mode: both roles are deactivated (or never-activated)
 	 */
 	musb_exit_debugfs(musb);
-	musb_shutdown(pdev);
+
+	pm_runtime_get_sync(musb->controller);
+	musb_host_cleanup(musb);
+	musb_gadget_cleanup(musb);
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_platform_exit(musb);
+	pm_runtime_put(musb->controller);
+	/* FIXME power down */
+
 	musb_phy_callback = NULL;
 
 	if (musb->dma_controller)
@@ -2612,7 +2602,6 @@ static struct platform_driver musb_driver = {
 	},
 	.probe		= musb_probe,
 	.remove		= musb_remove,
-	.shutdown	= musb_shutdown,
 };
 
 module_platform_driver(musb_driver);
-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 05/10] usb: musb: Fix PM runtime autosuspend

[Tony Lindgren]

Let's make the PM runtime use the standard autosuspend calls.
Commit 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe
error and driver unbind") means we must pair use_autosuspend with
dont_use_autosuspend and then use put_sync to properly idle the
device.

Note that we'll be removing the PM runtime calls from the glue
layer to the MUSB core in the next patch.

Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/musb/musb_core.c   | 9 ++++++---
 drivers/usb/musb/musb_gadget.c | 3 ++-
 drivers/usb/musb/omap2430.c    | 5 +++--
 3 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index d7af8ed..90ccdb2 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2214,7 +2214,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	if (status)
 		goto fail5;
 
-	pm_runtime_put(musb->controller);
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
 
 	/*
 	 * For why this is currently needed, see commit 3e43a0725637
@@ -2242,6 +2243,7 @@ fail2_5:
 	usb_phy_shutdown(musb->xceiv);
 
 err_usb_phy_init:
+	pm_runtime_dont_use_autosuspend(musb->controller);
 	pm_runtime_put_sync(musb->controller);
 
 fail2:
@@ -2307,8 +2309,6 @@ static int musb_remove(struct platform_device *pdev)
 	spin_unlock_irqrestore(&musb->lock, flags);
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 	musb_platform_exit(musb);
-	pm_runtime_put(musb->controller);
-	/* FIXME power down */
 
 	musb_phy_callback = NULL;
 
@@ -2320,6 +2320,9 @@ static int musb_remove(struct platform_device *pdev)
 	cancel_work_sync(&musb->irq_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
+	pm_runtime_dont_use_autosuspend(musb->controller);
+	pm_runtime_put_sync(musb->controller);
+	pm_runtime_disable(musb->controller);
 	musb_free(musb);
 	device_init_wakeup(dev, 0);
 	return 0;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 152865b..fff5a8a 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1963,7 +1963,8 @@ static int musb_gadget_stop(struct usb_gadget *g)
 	 * that currently misbehaves.
 	 */
 
-	pm_runtime_put(musb->controller);
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
 
 	return 0;
 }
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 9d3645f..c55d4f3 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -441,8 +441,9 @@ static int omap2430_musb_init(struct musb *musb)
 	phy_init(musb->phy);
 	phy_power_on(musb->phy);
 
-	pm_runtime_put_noidle(musb->controller);
-	pm_runtime_put_noidle(glue->dev);
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+	pm_runtime_put(glue->dev);
 	return 0;
 
 err1:
-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 06/10] usb: musb: Split PM runtime between wrapper IP and musb core

[Tony Lindgren]

Let's not tinker with the PM runtime of musb core from the omap2430
wrapper. This allows us to initialize PM runtime for musb core later
on instead of doing it in stages. And omap2430 wrapper has no need
to for accessing musb core at this point.

Note that this does not remove all the PM runtime calls from the
glue layer, those will get removed in a later patch.

Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/musb/musb_core.c | 25 ++++++++++---------------
 drivers/usb/musb/omap2430.c  | 10 ----------
 2 files changed, 10 insertions(+), 25 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 90ccdb2..b492316 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2005,11 +2005,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	musb_readl = musb_default_readl;
 	musb_writel = musb_default_writel;
 
-	/* We need musb_read/write functions initialized for PM */
-	pm_runtime_use_autosuspend(musb->controller);
-	pm_runtime_set_autosuspend_delay(musb->controller, 500);
-	pm_runtime_enable(musb->controller);
-
 	/* The musb_platform_init() call:
 	 *   - adjusts musb->mregs
 	 *   - sets the musb->isr
@@ -2111,6 +2106,10 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	if (musb->ops->phy_callback)
 		musb_phy_callback = musb->ops->phy_callback;
 
+	/* We need musb_read/write functions initialized for PM */
+	pm_runtime_use_autosuspend(musb->controller);
+	pm_runtime_set_autosuspend_delay(musb->controller, 500);
+	pm_runtime_enable(musb->controller);
 	pm_runtime_get_sync(musb->controller);
 
 	status = usb_phy_init(musb->xceiv);
@@ -2300,6 +2299,9 @@ static int musb_remove(struct platform_device *pdev)
 	 */
 	musb_exit_debugfs(musb);
 
+	cancel_work_sync(&musb->irq_work);
+	cancel_delayed_work_sync(&musb->finish_resume_work);
+	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	pm_runtime_get_sync(musb->controller);
 	musb_host_cleanup(musb);
 	musb_gadget_cleanup(musb);
@@ -2308,21 +2310,14 @@ static int musb_remove(struct platform_device *pdev)
 	musb_generic_disable(musb);
 	spin_unlock_irqrestore(&musb->lock, flags);
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	pm_runtime_dont_use_autosuspend(musb->controller);
+	pm_runtime_put_sync(musb->controller);
+	pm_runtime_disable(musb->controller);
 	musb_platform_exit(musb);
-
 	musb_phy_callback = NULL;
-
 	if (musb->dma_controller)
 		musb_dma_controller_destroy(musb->dma_controller);
-
 	usb_phy_shutdown(musb->xceiv);
-
-	cancel_work_sync(&musb->irq_work);
-	cancel_delayed_work_sync(&musb->finish_resume_work);
-	cancel_delayed_work_sync(&musb->deassert_reset_work);
-	pm_runtime_dont_use_autosuspend(musb->controller);
-	pm_runtime_put_sync(musb->controller);
-	pm_runtime_disable(musb->controller);
 	musb_free(musb);
 	device_init_wakeup(dev, 0);
 	return 0;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c55d4f3..a2a158f 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -406,13 +406,6 @@ static int omap2430_musb_init(struct musb *musb)
 	if (status < 0)
 		goto err1;
 
-	status = pm_runtime_get_sync(dev);
-	if (status < 0) {
-		dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
-		pm_runtime_put_sync(glue->dev);
-		goto err1;
-	}
-
 	l = musb_readl(musb->mregs, OTG_INTERFSEL);
 
 	if (data->interface_type == MUSB_INTERFACE_UTMI) {
@@ -440,9 +433,6 @@ static int omap2430_musb_init(struct musb *musb)
 
 	phy_init(musb->phy);
 	phy_power_on(musb->phy);

[PATCH 07/10] usb: musb: Manage USB phy from PM runtime calls

[Tony Lindgren]

This simplifies things and allows idling both MUSB and PHY
when nothing is configured.

Let's also warn if PHY is not configured.

Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/musb/omap2430.c | 35 +++++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index a2a158f..b274923 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -395,6 +395,7 @@ static int omap2430_musb_init(struct musb *musb)
 		return PTR_ERR(musb->phy);
 	}
 	musb->isr = omap2430_musb_interrupt;
+	phy_init(musb->phy);
 
 	/*
 	 * Enable runtime PM for musb parent (this driver). We can't
@@ -431,8 +432,6 @@ static int omap2430_musb_init(struct musb *musb)
 	if (glue->status != MUSB_UNKNOWN)
 		omap_musb_set_mailbox(glue);
 
-	phy_init(musb->phy);
-	phy_power_on(musb->phy);
 	pm_runtime_put(glue->dev);
 	return 0;
 
@@ -491,11 +490,17 @@ static void omap2430_musb_disable(struct musb *musb)
 
 static int omap2430_musb_exit(struct musb *musb)
 {
-	del_timer_sync(&musb_idle_timer);
+	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 
+	del_timer_sync(&musb_idle_timer);
+	pm_runtime_get_sync(glue->dev);
 	omap2430_low_level_exit(musb);
-	phy_power_off(musb->phy);
+	pm_runtime_put_sync_suspend(glue->dev);
+	pm_runtime_disable(glue->dev);
 	phy_exit(musb->phy);
+	musb->phy = NULL;
+	cancel_work_sync(&glue->omap_musb_mailbox_work);
 
 	return 0;
 }
@@ -661,11 +666,7 @@ static int omap2430_remove(struct platform_device *pdev)
 {
 	struct omap2430_glue		*glue = platform_get_drvdata(pdev);
 
-	pm_runtime_get_sync(glue->dev);
-	cancel_work_sync(&glue->omap_musb_mailbox_work);
 	platform_device_unregister(glue->musb);
-	pm_runtime_put_sync(glue->dev);
-	pm_runtime_disable(glue->dev);
 
 	return 0;
 }
@@ -677,12 +678,15 @@ static int omap2430_runtime_suspend(struct device *dev)
 	struct omap2430_glue		*glue = dev_get_drvdata(dev);
 	struct musb			*musb = glue_to_musb(glue);
 
-	if (musb) {
-		musb->context.otg_interfsel = musb_readl(musb->mregs,
-				OTG_INTERFSEL);
+	if (WARN_ON(!musb))
+		return 0;
 
-		omap2430_low_level_exit(musb);
-	}
+	musb->context.otg_interfsel = musb_readl(musb->mregs,
+						 OTG_INTERFSEL);
+
+	omap2430_low_level_exit(musb);
+	if (!WARN_ON(!musb->phy))
+		phy_power_off(musb->phy);
 
 	return 0;
 }
@@ -692,9 +696,12 @@ static int omap2430_runtime_resume(struct device *dev)
 	struct omap2430_glue		*glue = dev_get_drvdata(dev);
 	struct musb			*musb = glue_to_musb(glue);
 
-	if (!musb)
+	if (WARN_ON(!musb))
 		return -EPROBE_DEFER;
 
+	if (!WARN_ON(!musb->phy))
+		phy_power_on(musb->phy);
+
 	omap2430_low_level_init(musb);
 	musb_writel(musb->mregs, OTG_INTERFSEL,
 		    musb->context.otg_interfsel);
-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 08/10] usb: musb: Remove try_idle for 2430 glue layer

[Tony Lindgren]

This is no longer needed with PM runtime at least for 2430 glue.
We can now rely only on PM runtime and cable detection.

The other glue layers can probably remove try_idle too, but that
needs to be tested for each platform before doing it.

Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/musb/omap2430.c | 91 ---------------------------------------------
 1 file changed, 91 deletions(-)

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index b274923..c352511 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -54,92 +54,6 @@ struct omap2430_glue {
 
 static struct omap2430_glue	*_glue;
 
-static struct timer_list musb_idle_timer;
-
-static void musb_do_idle(unsigned long _musb)
-{
-	struct musb	*musb = (void *)_musb;
-	unsigned long	flags;
-	u8	power;
-	u8	devctl;
-
-	spin_lock_irqsave(&musb->lock, flags);
-
-	switch (musb->xceiv->otg->state) {
-	case OTG_STATE_A_WAIT_BCON:
-
-		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-		if (devctl & MUSB_DEVCTL_BDEVICE) {
-			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
-			MUSB_DEV_MODE(musb);
-		} else {
-			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
-			MUSB_HST_MODE(musb);
-		}
-		break;
-	case OTG_STATE_A_SUSPEND:
-		/* finish RESUME signaling? */
-		if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
-			power = musb_readb(musb->mregs, MUSB_POWER);
-			power &= ~MUSB_POWER_RESUME;
-			dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power);
-			musb_writeb(musb->mregs, MUSB_POWER, power);
-			musb->is_active = 1;
-			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
-						| MUSB_PORT_STAT_RESUME);
-			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
-			usb_hcd_poll_rh_status(musb->hcd);
-			/* NOTE: it might really be A_WAIT_BCON ... */
-			musb->xceiv->otg->state = OTG_STATE_A_HOST;
-		}
-		break;
-	case OTG_STATE_A_HOST:
-		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-		if (devctl &  MUSB_DEVCTL_BDEVICE)
-			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
-		else
-			musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
-	default:
-		break;
-	}
-	spin_unlock_irqrestore(&musb->lock, flags);
-}
-
-
-static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
-{
-	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
-	static unsigned long	last_timer;
-
-	if (timeout == 0)
-		timeout = default_timeout;
-
-	/* Never idle if active, or when VBUS timeout is not set as host */
-	if (musb->is_active || ((musb->a_wait_bcon == 0)
-			&& (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) {
-		dev_dbg(musb->controller, "%s active, deleting timer\n",
-			usb_otg_state_string(musb->xceiv->otg->state));
-		del_timer(&musb_idle_timer);
-		last_timer = jiffies;
-		return;
-	}
-
-	if (time_after(last_timer, timeout)) {
-		if (!timer_pending(&musb_idle_timer))
-			last_timer = timeout;
-		else {
-			dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
-			return;
-		}
-	}
-	last_timer = timeout;
-
-	dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
-		usb_otg_state_string(musb->xceiv->otg->state),
-		(unsigned long)jiffies_to_msecs(timeout - jiffies));
-	mod_timer(&musb_idle_timer, timeout);
-}
-
 static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 {
 	struct usb_otg	*otg = musb->xceiv->otg;
@@ -427,8 +341,6 @@ static int omap2430_musb_init(struct musb *musb)
 			musb_readl(musb->mregs, OTG_INTERFSEL),
 			musb_readl(musb->mregs, OTG_SIMENABLE));
 
-	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
-
 	if (glue->status != MUSB_UNKNOWN)
 		omap_musb_set_mailbox(glue);
 
@@ -493,7 +405,6 @@ static int omap2430_musb_exit(struct musb *musb)
 	struct device *dev = musb->controller;
 	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 
-	del_timer_sync(&musb_idle_timer);
 	pm_runtime_get_sync(glue->dev);
 	omap2430_low_level_exit(musb);
 	pm_runtime_put_sync_suspend(glue->dev);
@@ -515,8 +426,6 @@ static const struct musb_platform_ops omap2430_ops = {
 	.exit		= omap2430_musb_exit,
 
 	.set_mode	= omap2430_musb_set_mode,
-	.try_idle	= omap2430_musb_try_idle,

[PATCH 09/10] usb: musb: Fix PM runtime with delayed work

[Tony Lindgren]

We have MUSB setting pm_runtime_irq_safe with the following
commits:

30a70b026b4c ("usb: musb: fix obex in g_nokia.ko causing kernel panic")
3e43a0725637 ("usb: musb: core: add pm_runtime_irq_safe()")

Let's fix things to use delayed work so we can remove the
pm_runtime_irq_safe.

Note that we may want to set this up in a generic way in the
gadget framework eventually.

Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/musb/musb_core.h   |  1 +
 drivers/usb/musb/musb_gadget.c | 23 +++++++++++++++++------
 2 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index b6afe9e..2947384 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -312,6 +312,7 @@ struct musb {
 	struct work_struct	irq_work;
 	struct delayed_work	deassert_reset_work;
 	struct delayed_work	finish_resume_work;
+	struct delayed_work	gadget_work;
 	u16			hwvers;
 
 	u16			intrrxe;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index fff5a8a..2fc6557 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1656,6 +1656,19 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 	return usb_phy_set_power(musb->xceiv, mA);
 }
 
+static void musb_gadget_work(struct work_struct *work)
+{
+	struct musb *musb;
+	unsigned long flags;
+
+	musb = container_of(work, struct musb, gadget_work.work);
+	pm_runtime_get_sync(musb->controller);
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_pullup(musb, musb->softconnect);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	pm_runtime_put(musb->controller);
+}
+
 static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
 {
 	struct musb	*musb = gadget_to_musb(gadget);
@@ -1663,20 +1676,16 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
 
 	is_on = !!is_on;
 
-	pm_runtime_get_sync(musb->controller);
-
 	/* NOTE: this assumes we are sensing vbus; we'd rather
 	 * not pullup unless the B-session is active.
 	 */
 	spin_lock_irqsave(&musb->lock, flags);
 	if (is_on != musb->softconnect) {
 		musb->softconnect = is_on;
-		musb_pullup(musb, is_on);
+		schedule_delayed_work(&musb->gadget_work, 0);
 	}
 	spin_unlock_irqrestore(&musb->lock, flags);
 
-	pm_runtime_put(musb->controller);
-
 	return 0;
 }
 
@@ -1845,7 +1854,7 @@ int musb_gadget_setup(struct musb *musb)
 #elif IS_ENABLED(CONFIG_USB_MUSB_GADGET)
 	musb->g.is_otg = 0;
 #endif

[PATCH 10/10] usb: musb: Remove pm_runtime_set_irq_safe

[Tony Lindgren]

With the pull up being handled with delayed work, we can
now finally remove pm_runtime_set_irq_safe that blocks the
MUSB glue from idling.

Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/musb/musb_core.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index b492316..f4731a0 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2216,12 +2216,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	pm_runtime_mark_last_busy(musb->controller);
 	pm_runtime_put_autosuspend(musb->controller);
 
-	/*
-	 * For why this is currently needed, see commit 3e43a0725637
-	 * ("usb: musb: core: add pm_runtime_irq_safe()")
-	 */
-	pm_runtime_irq_safe(musb->controller);

Re: [PATCH 03/10] usb: musb: Fix PM runtime handling for connected cable

[Sergei Shtylyov]

Hello.

On 04/28/2016 08:33 PM, Tony Lindgren wrote:

> We may have drivers loaded but no configured gadgets
> and MUSB may be in host mode. If gadgets are configured
> during host mode, PM runtime will get confused.
>
> Disconnect PM runtime from gadget state, and do it only
> based on the cable.
>
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
>   drivers/usb/musb/omap2430.c | 20 +++++++++++++-------
>   1 file changed, 13 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
> index c84e0322..9d3645f 100644
> --- a/drivers/usb/musb/omap2430.c
> +++ b/drivers/usb/musb/omap2430.c
> @@ -259,6 +259,13 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
>   	struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev);
>   	struct omap_musb_board_data *data = pdata->board_data;
>   	struct usb_otg *otg = musb->xceiv->otg;
> +	bool cable_connected;
> +
> +	cable_connected = ((glue->status & MUSB_ID_GROUND) ||
> +			   (glue->status & MUSB_VBUS_VALID));

	cable_connected = glue->status & (MUSB_ID_GROUND |
					MUSB_VBUS_VALID);

[...]

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 03/10] usb: musb: Fix PM runtime handling for connected cable

[Tony Lindgren]

* Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> [160428 10:55]:
> Hello.
> 
> On 04/28/2016 08:33 PM, Tony Lindgren wrote:
> 
> >We may have drivers loaded but no configured gadgets
> >and MUSB may be in host mode. If gadgets are configured
> >during host mode, PM runtime will get confused.
> >
> >Disconnect PM runtime from gadget state, and do it only
> >based on the cable.
> >
> >Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> >---
> >  drivers/usb/musb/omap2430.c | 20 +++++++++++++-------
> >  1 file changed, 13 insertions(+), 7 deletions(-)
> >
> >diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
> >index c84e0322..9d3645f 100644
> >--- a/drivers/usb/musb/omap2430.c
> >+++ b/drivers/usb/musb/omap2430.c
> >@@ -259,6 +259,13 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
> >  	struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev);
> >  	struct omap_musb_board_data *data = pdata->board_data;
> >  	struct usb_otg *otg = musb->xceiv->otg;
> >+	bool cable_connected;
> >+
> >+	cable_connected = ((glue->status & MUSB_ID_GROUND) ||
> >+			   (glue->status & MUSB_VBUS_VALID));
> 
> 	cable_connected = glue->status & (MUSB_ID_GROUND |
> 					MUSB_VBUS_VALID);

Thanks, actually that's an enumeration so needs fixing.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 03/10] usb: musb: Fix PM runtime handling for connected cable

[Tony Lindgren]

* Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> [160428 11:09]:
> * Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> [160428 10:55]:
> > >+	cable_connected = ((glue->status & MUSB_ID_GROUND) ||
> > >+			   (glue->status & MUSB_VBUS_VALID));
> > 
> > 	cable_connected = glue->status & (MUSB_ID_GROUND |
> > 					MUSB_VBUS_VALID);
> 
> Thanks, actually that's an enumeration so needs fixing.

Here's an updated version of this patch.

Regards,

Tony

8< ------------------
From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Date: Fri, 29 Apr 2016 08:12:55 -0700
Subject: [PATCH] usb: musb: Fix PM runtime handling for connected cable

We may have drivers loaded but no configured gadgets
and MUSB may be in host mode. If gadgets are configured
during host mode, PM runtime will get confused.

Disconnect PM runtime from gadget state, and do it only
based on the cable.

Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -259,6 +259,13 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 	struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev);
 	struct omap_musb_board_data *data = pdata->board_data;
 	struct usb_otg *otg = musb->xceiv->otg;
+	bool cable_connected;
+
+	cable_connected = ((glue->status == MUSB_ID_GROUND) ||
+			   (glue->status == MUSB_VBUS_VALID));
+
+	if (cable_connected)
+		pm_runtime_get_sync(dev);
 
 	switch (glue->status) {
 	case MUSB_ID_GROUND:
@@ -268,7 +275,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		musb->xceiv->otg->state = OTG_STATE_A_IDLE;
 		musb->xceiv->last_event = USB_EVENT_ID;
 		if (musb->gadget_driver) {
-			pm_runtime_get_sync(dev);
 			omap_control_usb_set_mode(glue->control_otghs,
 				USB_MODE_HOST);
 			omap2430_musb_set_vbus(musb, 1);
@@ -281,8 +287,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		otg->default_a = false;
 		musb->xceiv->otg->state = OTG_STATE_B_IDLE;
 		musb->xceiv->last_event = USB_EVENT_VBUS;
-		if (musb->gadget_driver)
-			pm_runtime_get_sync(dev);
 		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
 		break;
 
@@ -291,11 +295,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		dev_dbg(dev, "VBUS Disconnect\n");
 
 		musb->xceiv->last_event = USB_EVENT_NONE;
-		if (musb->gadget_driver) {
+		if (musb->gadget_driver)
 			omap2430_musb_set_vbus(musb, 0);
-			pm_runtime_mark_last_busy(dev);
-			pm_runtime_put_autosuspend(dev);
-		}
 
 		if (data->interface_type == MUSB_INTERFACE_UTMI)
 			otg_set_vbus(musb->xceiv->otg, 0);
@@ -307,6 +308,11 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		dev_dbg(dev, "ID float\n");
 	}
 
+	if (!cable_connected) {
+		pm_runtime_mark_last_busy(dev);
+		pm_runtime_put_autosuspend(dev);
+	}
+
 	atomic_notifier_call_chain(&musb->xceiv->notifier,
 			musb->xceiv->last_event, NULL);
 }
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 00/10] Get MUSB PM runtime working again

[Ivaylo Dimitrov]

[-- Attachment #1: Type: text/plain, Size: 502 bytes --]

Hi

On 28.04.2016 20:33, Tony Lindgren wrote:
> Hi all,
>
> Here's a series of fixes to get MUSB PM runtime working again.
>
> I can now test PM runtime with the 2430 glue layer with this set,
> so adding PM runtime support for other glue layers should be
> possible.
>
> Regards,
>
> Tony
>
>

Unfortunately that makes my n900 unbootable with USB cable detached, see 
the attached file (at [  152.121673]) when there is USB cable. I guess 
we're missing a couple of pm_runtime_get()/put() calls.

Ivo

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log; name="dmesg.log", Size: 50295 bytes --]

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.6.0-rc4+ (ivo@ivo-H81M-S2PV) (gcc version 4.7.2 20120701 (prerelease) (Linaro GCC 4.7-2012.07) ) #2 PREEMPT Sun May 1 08:43:54 EEST 2016
[    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine model: Nokia N900
[    0.000000] omapfb: reserved 7340032 bytes at 0x8f800000
[    0.000000] Reserved memory: initialized node omapfb, compatible id ti,omapfb-memsize
[    0.000000] dsp: reserved 9437184 bytes at 0x8e000000
[    0.000000] Reserved memory: initialized node dsp, compatible id ti,dsp-memsize
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c093afdc, node_mem_map cf5f9000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65280 pages, LIFO batch:15
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: rootdelay root=/dev/ram0 mtdoops.mtddev=log log_buf_len=1M
[    0.000000] log_buf_len: 1048576 bytes
[    0.000000] early log buf free: 64056(97%)
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 219868K/261120K available (5296K kernel code, 238K rwdata, 1648K rodata, 1024K init, 256K bss, 41252K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07c80c4   (7937 kB)
[    0.000000]       .init : 0xc0800000 - 0xc0900000   (1024 kB)
[    0.000000]       .data : 0xc0900000 - 0xc093bb80   ( 239 kB)
[    0.000000]        .bss : 0xc093bb80 - 0xc097bb80   ( 256 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Clocking rate (Crystal/Core/MPU): 19.2/332/500 MHz
[    0.000000] OMAP clockevent source: timer1 at 32768 Hz
[    0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
[    0.000030] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000579] Console: colour dummy device 80x30
[    0.002075] console [tty0] enabled
[    0.002136] Calibrating delay loop... 496.43 BogoMIPS (lpj=2482176)
[    0.048492] pid_max: default: 32768 minimum: 301
[    0.048645] Security Framework initialized
[    0.048767] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.048828] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.050079] CPU: Testing write buffer coherency: ok
[    0.050750] Setting up static identity map for 0x80100000 - 0x80100058
[    0.055541] devtmpfs: initialized
[    0.101013] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[    0.101806] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.102386] pinctrl core: initialized pinctrl subsystem
[    0.104370] NET: Registered protocol family 16
[    0.105987] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.126647] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[    0.127380] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[    0.198150] cpuidle: using governor ladder
[    0.228088] cpuidle: using governor menu
[    0.228790] Reprogramming SDRC clock to 332000000 Hz
[    0.236907] OMAP GPIO hardware version 2.5
[    0.246704] irq: no irq domain found for /ocp/l4@48000000/scm@2000/pinmux@30 !
[    0.247436] irq: no irq domain found for /ocp/l4@48000000/scm@2000/pinmux@30 !
[    0.262664] omap-gpmc 6e000000.gpmc: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_gpmc_pins, deferring probe
[    0.267913] RX-51: Add gpio switches
[    0.268066] RX-51: Enabling ARM errata 430973 workaround
[    0.269866] RX-51: Registering OMAP3 HWRNG device
[    0.274169] platform 48050000.dss: assigned reserved memory node omapfb
[    0.274505] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.275543] Reserving DMA channels 0 and 1 for HS ROM code
[    0.275634] OMAP DMA hardware revision 4.0
[    0.297760] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[    0.303863] omap-iommu 480bd400.mmu: 480bd400.mmu registered
[    0.304199] omap-iommu 5d000000.mmu: 5d000000.mmu registered
[    0.304992] usbcore: registered new interface driver usbfs
[    0.305175] usbcore: registered new interface driver hub
[    0.305389] usbcore: registered new device driver usb
[    0.306549] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe
[    0.306701] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c2_pins, deferring probe
[    0.306854] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe
[    0.308319] omap-mailbox 48094000.mailbox: omap mailbox rev 0x40
[    0.308990] Advanced Linux Sound Architecture Driver Initialized.
[    0.310821] clocksource: Switched to clocksource 32k_counter
[    0.311157] VFS: Disk quotas dquot_6.6.0
[    0.311309] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.331024] NET: Registered protocol family 2
[    0.332336] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.332458] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.332550] TCP: Hash tables configured (established 2048 bind 2048)
[    0.332733] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.332824] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.333129] NET: Registered protocol family 1
[    0.333679] Trying to unpack rootfs image as initramfs...
[    0.334228] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
[    0.439727] Freeing initrd memory: 12468K (ce900000 - cf52d000)
[    0.444152] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.445190] workingset: timestamp_bits=28 max_order=16 bucket_order=0
[    0.465332] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.467803] io scheduler noop registered
[    0.467895] io scheduler deadline registered
[    0.468353] io scheduler cfq registered (default)
[    0.469818] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[    0.470275] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[    0.471252] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36
[    0.473754] 48050000.dss supply vdda_video not found, using dummy regulator
[    0.474090] OMAP DSS rev 2.0
[    0.474426] omapdss_dss 48050000.dss: bound 48050400.dispc (ops dispc_component_ops)
[    0.474761] omapdss_dss 48050000.dss: bound 48050c00.encoder (ops venc_component_ops)
[    0.476135] omapfb omapfb: no displays
[    0.476348] omapfb omapfb: failed to setup omapfb
[    0.478881] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    0.480072] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[    0.482025] omap3_rom_rng: initializing
[    0.511047] brd: module loaded
[    0.521209] acx565akm spi1.2: omapfb: acx565akm rev ad LCD detected
[    0.526031] HS USB OTG: no transceiver configured
[    0.526123] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
[    0.526550] udc-core: couldn't find an available UDC - added [g_nokia] to list of pending drivers
[    0.527404] i2c /dev entries driver
[    0.528411] omap_hsmmc 4809c000.mmc: Got CD GPIO
[    0.585113] rx51-audio n900-audio: could not get speaker enable gpio
[    0.585968] Initializing XFRM netlink socket
[    0.586090] NET: Registered protocol family 17
[    0.586242] NET: Registered protocol family 15
[    0.586364] NET: Registered protocol family 35
[    0.586608] Key type dns_resolver registered
[    0.586914] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[    0.587005] omap2_set_init_voltage: unable to set vdd_mpu_iva
[    0.587066] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[    0.587127] omap2_set_init_voltage: unable to set vdd_core
[    0.592559] ThumbEE CPU extension supported.
[    0.592651] SmartReflex Class3 initialized
[    0.593109] Bootup reason: pwr_key
[    0.593170] OMAP GPIO switch handler initializing
[    0.593933] gpio-switch: gpio_reguest failed for cam_focus 68
[    0.594238] gpio-switch: gpio_reguest failed for cam_launch 69
[    0.594512] gpio-switch: gpio_reguest failed for cam_shutter 110
[    0.596252] gpio-switch: gpio_reguest failed for headphone 177
[    0.596527] gpio-switch: gpio_reguest failed for kb_lock 113
[    0.596832] gpio-switch: gpio_reguest failed for proximity 89
[    0.597106] gpio-switch: gpio_reguest failed for sleep_ind 162
[    0.597381] gpio-switch: gpio_reguest failed for slide 71
[    0.597473] slide (GPIO 71) is now open
[    0.597534] proximity (GPIO 89) is now open
[    0.597564] kb_lock (GPIO 113) is now closed
[    0.597625] headphone (GPIO 177) is now connected
[    0.597656] cam_shutter (GPIO 110) is now closed
[    0.597717] cam_launch (GPIO 69) is now active
[    0.597747] cam_focus (GPIO 68) is now active
[    0.599151] registered taskstats version 1
[    0.601684] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[    0.601776] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    0.602416] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x01000000, virtual base d0940000, freq 83 MHz
[    0.602539] OneNAND Manufacturer: Numonyx (0x20)
[    0.602569] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
[    0.602600] OneNAND version = 0x0031
[    0.602661] Chip support all block unlock
[    0.602661] Chip has 2 plane
[    0.604248] Scanning device for bad blocks
[    0.698455] 6 ofpart partitions found on MTD device omap2-onenand
[    0.698516] Creating 6 MTD partitions on "omap2-onenand":
[    0.698577] 0x000000000000-0x000000020000 : "bootloader"
[    0.699462] 0x000000020000-0x000000080000 : "config"
[    0.700195] 0x000000080000-0x0000000c0000 : "log"
[    0.702270] onenand_wait: ECC error = 0x4844
[    0.702331] mtdoops: read failure at 131072 (8 of 8 read), err -74
[    0.702423] onenand_wait: ECC error = 0x4848
[    0.702484] mtdoops: read failure at 135168 (8 of 8 read), err -74
[    0.702575] onenand_wait: correctable ECC error = 0x4444
[    0.702636] onenand_wait: ECC error = 0x8484
[    0.702667] mtdoops: read failure at 143360 (8 of 8 read), err -74
[    0.702758] onenand_wait: ECC error = 0x8884
[    0.702819] mtdoops: read failure at 147456 (8 of 8 read), err -74
[    0.702911] onenand_wait: ECC error = 0x8488
[    0.702941] mtdoops: read failure at 151552 (8 of 8 read), err -74
[    0.703033] onenand_wait: ECC error = 0x8884
[    0.703094] mtdoops: read failure at 155648 (8 of 8 read), err -74
[    0.703155] onenand_wait: ECC error = 0x4884
[    0.703216] mtdoops: read failure at 159744 (8 of 8 read), err -74
[    0.703308] onenand_wait: ECC error = 0x8848
[    0.703338] mtdoops: read failure at 163840 (8 of 8 read), err -74
[    0.703430] onenand_wait: ECC error = 0x8444
[    0.703491] mtdoops: read failure at 167936 (8 of 8 read), err -74
[    0.703582] onenand_wait: ECC error = 0x8884
[    0.703613] mtdoops: read failure at 172032 (8 of 8 read), err -74
[    0.703704] onenand_wait: ECC error = 0x8484
[    0.703765] mtdoops: read failure at 176128 (8 of 8 read), err -74
[    0.703857] onenand_wait: ECC error = 0x4844
[    0.703887] mtdoops: read failure at 180224 (8 of 8 read), err -74
[    0.703979] onenand_wait: ECC error = 0x8448
[    0.704040] mtdoops: read failure at 184320 (8 of 8 read), err -74
[    0.704132] onenand_wait: ECC error = 0x4888
[    0.704162] mtdoops: read failure at 188416 (8 of 8 read), err -74
[    0.704254] onenand_wait: ECC error = 0x8444
[    0.704315] mtdoops: read failure at 192512 (8 of 8 read), err -74
[    0.704406] onenand_wait: ECC error = 0x8884
[    0.704437] mtdoops: read failure at 196608 (8 of 8 read), err -74
[    0.704528] onenand_wait: ECC error = 0x8848
[    0.704589] mtdoops: read failure at 200704 (8 of 8 read), err -74
[    0.704650] onenand_wait: ECC error = 0x4884
[    0.704711] mtdoops: read failure at 204800 (8 of 8 read), err -74
[    0.704803] onenand_wait: ECC error = 0x8848
[    0.704864] mtdoops: read failure at 208896 (8 of 8 read), err -74
[    0.704925] onenand_wait: ECC error = 0x4484
[    0.704986] mtdoops: read failure at 212992 (8 of 8 read), err -74
[    0.705078] onenand_wait: ECC error = 0x8488
[    0.705108] mtdoops: read failure at 217088 (8 of 8 read), err -74
[    0.705200] onenand_wait: ECC error = 0x8484
[    0.705261] mtdoops: read failure at 221184 (8 of 8 read), err -74
[    0.705352] onenand_wait: ECC error = 0x8488
[    0.705383] mtdoops: read failure at 225280 (8 of 8 read), err -74
[    0.705474] onenand_wait: ECC error = 0x8884
[    0.705535] mtdoops: read failure at 229376 (8 of 8 read), err -74
[    0.705627] onenand_wait: ECC error = 0x8848
[    0.705657] mtdoops: read failure at 233472 (8 of 8 read), err -74
[    0.705749] onenand_wait: ECC error = 0x8444
[    0.705810] mtdoops: read failure at 237568 (8 of 8 read), err -74
[    0.705902] onenand_wait: ECC error = 0x8448
[    0.705932] mtdoops: read failure at 241664 (8 of 8 read), err -74
[    0.706024] onenand_wait: ECC error = 0x8444
[    0.706085] mtdoops: read failure at 245760 (8 of 8 read), err -74
[    0.706176] onenand_wait: ECC error = 0x4488
[    0.706207] mtdoops: read failure at 249856 (8 of 8 read), err -74
[    0.706298] onenand_wait: ECC error = 0x8484
[    0.706359] mtdoops: read failure at 253952 (8 of 8 read), err -74
[    0.706420] onenand_wait: ECC error = 0x8844
[    0.706481] mtdoops: read failure at 258048 (8 of 8 read), err -74
[    0.706542] mtdoops: ready 30, 31 (no erase)
[    0.706542] mtdoops: Attached to MTD device 2
[    0.706634] 0x0000000c0000-0x0000002c0000 : "kernel"
[    0.707397] 0x0000002c0000-0x0000004c0000 : "initfs"
[    0.708160] 0x0000004c0000-0x000010000000 : "rootfs"
[    1.031585] twl 1-0048: PIH (irq 23) chaining IRQs 340..348
[    1.031799] twl 1-0048: power (irq 345) chaining IRQs 348..355
[    1.073669] twl4030ldo_get_voltage_sel VAUX1 3
[    1.073913] twl4030reg_set_mode VAUX1 2
[    1.151367] twl4030reg_enable VAUX1 2e
[    1.192016] twl4030ldo_get_voltage_sel VAUX2_4030 5
[    1.192291] twl4030reg_set_mode VAUX2_4030 2
[    1.291961] twl4030ldo_get_voltage_sel VAUX3 4
[    1.292419] twl4030ldo_get_voltage_sel VAUX3 4
[    1.292480] twl4030reg_set_mode VAUX3 2
[    1.371368] twl4030ldo_get_voltage_sel VAUX3 4
[    1.391998] twl4030ldo_get_voltage_sel VAUX4 9
[    1.392242] twl4030reg_set_mode VAUX4 2
[    1.512023] twl4030ldo_get_voltage_sel VDAC 3
[    1.532012] twl4030ldo_get_voltage_sel VIO 0
[    1.532470] twl4030reg_enable VIO ae
[    1.572143] twl4030reg_enable VINTANA1 ae
[    1.612030] twl4030ldo_get_voltage_sel VINTANA2 1
[    1.612487] twl4030reg_enable VINTANA2 ae
[    1.652191] twl4030reg_enable VINTDIG ae
[    1.691986] twl4030ldo_get_voltage_sel VMMC1 3
[    1.692443] twl4030ldo_get_voltage_sel VMMC1 3
[    1.692504] twl4030reg_set_mode VMMC1 2
[    1.771362] twl4030ldo_get_voltage_sel VMMC1 3
[    1.792053] twl4030ldo_get_voltage_sel VMMC2 a
[    1.792510] twl4030ldo_get_voltage_sel VMMC2 a
[    1.792572] twl4030reg_set_mode VMMC2 2
[    1.871368] twl4030reg_enable VMMC2 8
[    1.891815] twl4030ldo_get_voltage_sel VMMC2 a
[    1.972045] twl4030ldo_get_voltage_sel VPLL1 3
[    1.972290] twl4030reg_set_mode VPLL1 2
[    2.051361] twl4030reg_enable VPLL1 ae
[    2.092071] twl4030ldo_get_voltage_sel VPLL2 5
[    2.092346] twl4030reg_set_mode VPLL2 2
[    2.171356] twl4030reg_enable VPLL2 2e
[    2.212066] twl4030ldo_get_voltage_sel VSIM 3
[    2.212341] twl4030reg_set_mode VSIM 2
[    2.311767] twl4030_gpio twl4030-gpio: gpio (irq 340) chaining IRQs 356..373
[    2.511413] twl4030reg_is_enabled VUSB3V1 0
[    2.511657] twl4030reg_enable VUSB3V1 0
[    2.531860] twl4030reg_is_enabled VUSB1V8 0
[    2.532104] twl4030reg_enable VUSB1V8 0
[    2.571350] twl4030reg_is_enabled VUSB1V5 0
[    2.571594] twl4030reg_enable VUSB1V5 0
[    2.651550] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Initialized TWL4030 USB module
[    2.654266] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-1/1-0048/48070000.i2c:twl@48:pwrbutton/input/input0
[    2.655914] input: TWL4030 Keypad as /devices/platform/68000000.ocp/48070000.i2c/i2c-1/1-0048/48070000.i2c:twl@48:keypad/input/input1
[    2.891204] 48070000.i2c:twl@48:madc supply vusb3v1 not found, using dummy regulator
[    5.071624] twl4030reg_disable VUSB1V5 2e
[    5.091339] twl4030reg_disable VUSB1V8 2e
[    5.111267] twl4030reg_disable VUSB3V1 2e
[    6.771240] omap_i2c 48070000.i2c: bus 1 rev3.3 at 2200 kHz
[    6.774291] twl4030reg_is_enabled VMMC2 2e
[    6.774749] twl4030reg_is_enabled VMMC2 2e
[    6.776031] twl4030reg_is_enabled VMMC2 2e
[    6.776428] twl4030reg_is_enabled VMMC2 2e
[    6.778137] twl4030reg_is_enabled VMMC2 2e
[    6.782135] omap_i2c 48072000.i2c: bus 2 rev3.3 at 100 kHz
[    6.784271] omap_i2c 48060000.i2c: bus 3 rev3.3 at 400 kHz
[    6.785827] twl4030reg_is_enabled VAUX1 2e
[    6.808898] Console: switching to colour frame buffer device 100x30
[    6.881591] omapfb omapfb: using display 'lcd' mode 800x480
[    6.887939] twl4030reg_is_enabled VUSB3V1 e8
[    6.893737] twl4030reg_is_enabled VUSB1V8 0
[    6.899230] twl4030reg_enable VUSB1V8 0
[    6.941467] twl4030reg_is_enabled VUSB1V5 0
[    6.947021] twl4030reg_enable VUSB1V5 0
[    7.113586] using random self ethernet address
[    7.118927] using random host ethernet address
[    7.124206] Mass Storage Function, version: 2009/09/11
[    7.129425] LUN: removable file: (no medium)
[    7.134704] LUN: removable file: (no medium)
[    7.139556] LUN: removable file: (no medium)
[    7.144042] Number of LUNs=2
[    7.149444] g_nokia gadget: USB CDC Phonet function
[    7.153717] g_nokia gadget: using musb-hdrc, OUT ep1out, IN ep1in
[    7.158905] usb0: HOST MAC 6e:21:e6:ae:5c:ed
[    7.163055] usb0: MAC ea:25:e8:6e:72:d8
[    7.167266] g_nokia gadget: USB CDC Phonet function
[    7.171417] g_nokia gadget: using musb-hdrc, OUT ep1out, IN ep1in
[    7.175750] g_nokia gadget: N900 (PC-Suite Mode)
[    7.179870] g_nokia gadget: g_nokia ready
[    7.185119] omap_hsmmc 4809c000.mmc: Got CD GPIO
[    7.190490] twl4030reg_is_enabled VMMC1 ee
[    7.195312] twl4030reg_is_enabled VMMC1 ee
[    7.199951] twl4030reg_disable VMMC1 ee
[    7.221893] twl4030reg_is_enabled VMMC1 0
[    7.226501] twl4030ldo_get_voltage_sel VMMC1 3
[    7.230895] twl4030ldo_set_voltage_sel VMMC1 3
[    7.251495] twl4030reg_is_enabled VMMC1 0
[    7.255889] twl4030reg_enable VMMC1 0
[    7.316864] twl4030reg_is_enabled VAUX3 2e
[    7.321319] twl4030reg_is_enabled VAUX3 2e
[    7.325561] twl4030reg_disable VAUX3 2e
[    7.341369] twl4030reg_is_enabled VSIM 2e
[    7.345611] twl4030reg_is_enabled VSIM 2e
[    7.345672] twl4030reg_disable VMMC1 2e
[    7.353210] twl4030reg_disable VSIM 2e
[    7.371948] twl4030reg_is_enabled VAUX3 0
[    7.392578] twl4030ldo_get_voltage_sel VAUX3 4
[    7.396118] twl4030ldo_set_voltage_sel VAUX3 4
[    7.411499] twl4030reg_is_enabled VAUX3 0
[    7.415435] twl4030reg_enable VAUX3 0
[    7.432006] twl4030reg_is_enabled VSIM 0
[    7.435821] twl4030reg_enable VSIM 0
[    7.557281] rx51-audio n900-audio: tlv320aic3x-hifi <-> 49022000.mcbsp mapping ok
[    7.571838] input: RX-51 AV Jack as /devices/platform/n900-audio/sound/card0/input2
[    7.578826] hctosys: unable to open rtc device (rtc0)
[    7.583068] sr_init: No PMIC hook to init smartreflex
[    7.587371] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[    7.592224] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[    7.613494] twl4030reg_is_enabled VAUX2_4030 2e
[    7.617706] VCSI: disabling
[    7.641906] twl4030reg_disable VAUX2_4030 2e
[    7.661376] twl4030reg_is_enabled VAUX4 0
[    7.665161] twl4030reg_is_enabled VDAC 2e
[    7.668518] VDAC: disabling
[    7.671997] twl4030reg_disable VDAC 2e
[    7.691253] twl4030reg_is_enabled VMMC1 0
[    7.694976] ALSA device list:
[    7.698455]   #0: RX-51
[    7.702545] RAMDISK: cramfs filesystem found at block 0
[    7.706237] RAMDISK: Loading 12468KiB [1 disk] into ram disk... |\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08
[    7.774993] mmc1: switch to bus width 8 failed
[    7.782714] /\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08
[    7.791687] mmc1: switch to bus width 4 failed
[    7.799468] mmc1: new high speed MMC card at address 0001
[    7.822143] -\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08
[    7.822143] mmcblk1: mmc1:0001 MMC32G 29.8 GiB 
[    7.831207] -\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08
[    7.841583] mmcblk1boot0: mmc1:0001 MMC32G partition 1 512 KiB
[    7.850982] /\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08
[    7.861145] mmcblk1boot1: mmc1:0001 MMC32G partition 2 512 KiB
[    7.871337] |\x08/\x08
[    7.872253]  mmcblk1: p1 p2 p3
[    7.881469] -\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08|\x08/\x08-\x08\\x08done.
[    8.272094] VFS: Mounted root (cramfs filesystem) readonly on device 1:0.
[    8.279144] Freeing unused kernel memory: 1024K (c0800000 - c0900000)
[   21.321472] lirc_dev: IR Remote Control driver registered, major 247 
[   21.594512] media: Linux media interface: v0.10
[   21.641723] Linux video capture interface: v2.00
[   21.936889] lirc_rx51 lirc-rx51: lirc_dev: driver lirc_rx51 registered at minor = 0
[   27.362609] input: gpio_keys as /devices/platform/gpio_keys/input/input3
[   43.492004] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[   48.568511] omap-sham 480c3000.sham: hw accel on OMAP rev 0.9
[   48.581268] omap-sham 480c3000.sham: initialization failed.
[   48.586547] omap-sham: probe of 480c3000.sham failed with error -22
[   52.960998] random: nonblocking pool is initialized
[   53.671447] twl4030reg_is_enabled VIO ee
[   53.681152] input: TSC200X touchscreen as /devices/platform/68000000.ocp/48098000.spi/spi_master/spi1/spi1.0/input/input4
[   70.958587] input: twl4030:vibrator as /devices/platform/68000000.ocp/48070000.i2c/i2c-1/1-0048/48070000.i2c:twl@48:audio/input/input5
[   73.261169] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[   73.303558] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[  104.123199] smc91x: not found (-19).
[  109.191650] tsl2563 2-0029: model 7, rev. 6
[  110.541290] omap_i2c 48072000.i2c: controller timed out
[  110.650604] lp5523x 2-0032: lp5523 Programmable led chip found
[  111.091339] bq27xxx-battery 2-0055: support ver. 1.2.0 enabled
[  112.453948] twl4030reg_is_enabled VAUX1 2e
[  112.552795] si4713 2-0063: chip found @ 0xc6 (OMAP I2C adapter)
[  112.861175] bq2415x-charger 2-006b: automode supported, waiting for events
[  112.885131] bq2415x-charger 2-006b: driver registered
[  118.961761] omap_ssi 48058000.ssi-controller: ssi controller 0 initialized (1 ports)!
[  123.221252] ieee80211 phy0: Selected rate control algorithm 'minstrel'
[  123.222686] wl1251: loaded
[  123.230346] wl1251: initialized
[  125.622589] ti-soc-thermal 48002524.bandgap: This OMAP thermal sensor is unreliable. You've been warned
[  125.651275] ti-soc-thermal 48002524.bandgap: Non-trimmed BGAP, Temp not accurate
[  129.891326] twl4030reg_is_enabled VAUX1 2e
[  129.941467] lis3lv02d: 8 bits sensor found
[  130.001678] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[  130.222473] et8ek8 3-003e: could not get clock
[  133.490234] omap3isp 480bc000.isp: parsing endpoint /ocp/isp@480bc000/ports/port@1/endpoint, interface 1
[  133.490295] omap3isp 480bc000.isp: clock lane polarity 0, pos 0
[  133.490295] omap3isp 480bc000.isp: data lane polarity 0, pos 1
[  133.490325] omap3isp 480bc000.isp: clock_inv 0 strobe 0 ccp2 1
[  133.490570] 480bc000.isp supply vdd-csiphy1 not found, using dummy regulator
[  133.508148] 480bc000.isp supply vdd-csiphy2 not found, using dummy regulator
[  133.521484] omap3isp 480bc000.isp: Revision 2.0 found
[  133.529022] iommu: Adding device 480bc000.isp to group 0
[  133.537811] omap-iommu 480bd400.mmu: 480bd400.mmu: version 1.1
[  133.545257] omap3isp 480bc000.isp: hist: using DMA channel dma0chan10
[  133.545318] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP CCP2 was not initialized!
[  133.552764] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP CSI2a was not initialized!
[  133.569793] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP CCDC was not initialized!
[  133.591857] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP preview was not initialized!
[  133.619537] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP resizer was not initialized!
[  133.647277] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP AEWB was not initialized!
[  133.691162] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP AF was not initialized!
[  133.697113] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP histogram was not initialized!
[  133.729797] omap3isp 480bc000.isp: Entity type for entity video-bus-switch was not initialized!
[  133.736206] video-bus-switch video-bus-switch: registered, init notifier...
[  133.740386] omap3isp 480bc000.isp: Entity type for entity et8ek8 3-003e was not initialized!
[  133.851165] et8ek8 3-003e: registered!
[  133.851470] twl4030reg_is_enabled VAUX4 0
[  133.916717] twl4030reg_enable VAUX4 0
[  133.959014] omap3isp 480bc000.isp: isp_xclk_set_rate: cam_xclka set to 9600000 Hz (div 18)
[  133.977630] smia_reglist_import: meta_reglist version V14 03-June-2008
[  133.991088] smia_reglist_import: type 10	w 2592	h 1968	fmt 30314442	ival 100/1292	ptr bf1fae34
[  133.991119] smia_reglist_import: type 10	w 2592	h 1968	fmt 30314142	ival 100/399	ptr bf1fb0a4
[  133.991149] smia_reglist_import: type 10	w 1296	h 984	fmt 30314142	ival 100/501	ptr bf1fb1d4
[  133.991149] smia_reglist_import: type 10	w 1296	h 984	fmt 30314442	ival 100/2500	ptr bf1fb270
[  133.991180] smia_reglist_import: type 10	w 1296	h 984	fmt 30314442	ival 100/3000	ptr bf1faed0
[  133.991180] smia_reglist_import: type 10	w 864	h 656	fmt 30314142	ival 100/2988	ptr bf1faf6c
[  133.991210] smia_reglist_import: type 10	w 648	h 492	fmt 30314142	ival 100/499	ptr bf1fb138
[  133.991210] smia_reglist_import: type 10	w 648	h 492	fmt 30314142	ival 100/2993	ptr bf1fb008
[  133.991241] smia_reglist_import: type 1	w 2592	h 1968	fmt 30314142	ival 100/1207	ptr bf1fac88
[  134.111450] twl4030reg_disable VAUX4 2e
[  134.121246] et8ek8 3-003e: initialized!
[  152.107238] isp1704_charger isp1707: init gpio 67
[  152.121673] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab001
[  152.127746] pgd = cf2c0000
[  152.133392] [fa0ab001] *pgd=48011452(bad)
[  152.138946] Internal error: : 1028 [#1] PREEMPT ARM
[  152.144348] Modules linked in: isp1704_charger(+) omap3_isp videobuf2_v4l2 videobuf2_dma_contig videobuf2_memops videobuf2_core et8ek8 smiaregs lis3lv02d_i2c lis3lv02d input_polldev ti_soc_thermal arc4 wl1251_spi wl1251 crc7 mac80211 cfg80211 omap_ssi hsi bq2415x_charger si4713 bq27xxx_battery_i2c bq27xxx_battery leds_lp5523 leds_lp55xx_common adp1653 v4l2_common tsl2563 smc91x mii rtc_twl twl4030_vibra ff_memless twl4030_wdt tsc2005 tsc200x_core omap_sham omap_wdt gpio_keys rx51_battery pwm_omap_dmtimer video_bus_switch videodev media ir_rx51 lirc_dev rc_core
[  152.180358] CPU: 0 PID: 703 Comm: modprobe Not tainted 4.6.0-rc4+ #2
[  152.186614] Hardware name: Nokia RX-51 board
[  152.192810] task: cf2ae300 ti: cf3d0000 task.ti: cf3d0000
[  152.199005] PC is at musb_default_readb+0x0/0xc
[  152.205108] LR is at musb_ulpi_write+0x34/0xf8
[  152.211151] pc : [<c0401dc4>]    lr : [<c0402ce8>]    psr: 60000013
[  152.211151] sp : cf3d1d40  ip : 00000000  fp : c017637c
[  152.223541] r10: 00000001  r9 : 00000000  r8 : 00000016
[  152.229797] r7 : 000000aa  r6 : ccbdee10  r5 : c0976c84  r4 : fa0ab000
[  152.236145] r3 : c0401dc4  r2 : 00000000  r1 : 00000001  r0 : fa0ab000
[  152.242492] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  152.249023] Control: 10c5387d  Table: 8f2c0019  DAC: 00000051
[  152.255401] Process modprobe (pid: 703, stack limit = 0xcf3d0210)
[  152.261688] Stack: (0xcf3d1d40 to 0xcf3d2000)
[  152.267974] 1d40: cd22db10 ccbdee10 cd9a9410 cd9a9400 cf5ef81c bf2471f8 00000000 00000000
[  152.274383] 1d60: 00000000 00000000 ffffffed cd9a9410 bf2481c0 00000045 bf24a000 c03a4578
[  152.280883] 1d80: cd9a9410 00000000 bf2481c0 c03a2d64 00000000 cd9a9410 cd9a9444 bf2481c0
[  152.287414] 1da0: c03a2ef4 c03a2f74 00000000 cf3d1db8 bf2481c0 c03a14d4 cd84994c cd9a37b0
[  152.293914] 1dc0: bf2481c0 bf2481c0 cd22dd80 00000000 c09236c8 c03a2444 bf248158 bf248158
[  152.300506] 1de0: 00000000 bf2481c0 c0904e1c c0904e1c bf248288 c03a37e4 c03a409c cf3afc40
[  152.307037] 1e00: c0904e1c c0101668 cd801f00 cf339c40 00006f20 0040003e 00000000 0040003f
[  152.313568] 1e20: c0724798 cf7df1a0 00000000 c01a2d80 cf7df1a0 0040003e cd801f00 cd252500
[  152.320098] 1e40: 00006f20 c01ca820 0000001c cf79da40 cd801f00 cd252480 bf248240 cf3d1f44
[  152.326751] 1e60: cf3af2c0 bf248288 cf3c1b00 0000001c 00000001 c019b6e8 bf248240 00000000
[  152.333282] 1e80: bf248240 cf3d1f44 00000001 c017904c bf24824c 00007fff bf248240 c01769f0
[  152.339721] 1ea0: c01763f0 00000000 bf2483ec 00000062 c0606324 d0bb12c8 cf3d1ed4 000a80e6
[  152.346038] 1ec0: cd252500 c0777df0 00400000 024002c2 00000000 c01c9f10 cd252480 00000000
[  152.352233] 1ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  152.358276] 1f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00003014
[  152.364044] 1f20: d0bb2014 00000000 000c639c 000a80e6 cf3d0000 00000051 00000000 c0179444
[  152.369689] 1f40: cd7566e8 d0baf000 00003014 d0bb0e18 d0bb0ccb d0bb1938 00001400 00001610
[  152.375305] 1f60: 00000000 00000000 00000000 00000a68 0000001e 0000001f 00000016 00000013
[  152.380950] 1f80: 00000011 00000000 cf264600 000bc440 00000000 00000000 00000080 c0107324
[  152.386566] 1fa0: 00000000 c0107160 000bc440 00000000 000c3388 00003014 000a80e6 00000000
[  152.392272] 1fc0: 000bc440 00000000 00000000 00000080 000b6cc8 000a80e6 bef66e68 00000000
[  152.397918] 1fe0: b6eb5d0c bef66a54 00018204 b6eb5d1c a0000010 000c3388 00000000 00000000
[  152.403594] [<c0401dc4>] (musb_default_readb) from [<c0402ce8>] (musb_ulpi_write+0x34/0xf8)
[  152.409454] [<c0402ce8>] (musb_ulpi_write) from [<bf2471f8>] (isp1704_charger_probe+0x15c/0x4e0 [isp1704_charger])
[  152.421325] [<bf2471f8>] (isp1704_charger_probe [isp1704_charger]) from [<c03a4578>] (platform_drv_probe+0x58/0xa0)
[  152.433624] [<c03a4578>] (platform_drv_probe) from [<c03a2d64>] (driver_probe_device+0x120/0x2b0)
[  152.440093] [<c03a2d64>] (driver_probe_device) from [<c03a2f74>] (__driver_attach+0x80/0xa4)
[  152.446624] [<c03a2f74>] (__driver_attach) from [<c03a14d4>] (bus_for_each_dev+0x50/0x88)
[  152.453155] [<c03a14d4>] (bus_for_each_dev) from [<c03a2444>] (bus_add_driver+0xc4/0x1e4)
[  152.459716] [<c03a2444>] (bus_add_driver) from [<c03a37e4>] (driver_register+0x9c/0xe0)
[  152.466247] [<c03a37e4>] (driver_register) from [<c0101668>] (do_one_initcall+0xf8/0x1c4)
[  152.472839] [<c0101668>] (do_one_initcall) from [<c019b6e8>] (do_init_module+0x54/0x1ac)
[  152.479400] [<c019b6e8>] (do_init_module) from [<c017904c>] (load_module+0x185c/0x1b14)
[  152.485961] [<c017904c>] (load_module) from [<c0179444>] (SyS_init_module+0x140/0x158)
[  152.492553] [<c0179444>] (SyS_init_module) from [<c0107160>] (ret_fast_syscall+0x0/0x3c)
[  152.499145] Code: e12fff1e e2800010 e0810180 e12fff1e (e7d00001) 
[  152.505767] ---[ end trace 713e393a1cd324be ]---
[  152.514312] In-band Error seen by MPU  at address 0
[  152.520874] ------------[ cut here ]------------
[  152.527282] WARNING: CPU: 0 PID: 703 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xdc/0x124
[  152.533905] Modules linked in: isp1704_charger(+) omap3_isp videobuf2_v4l2 videobuf2_dma_contig videobuf2_memops videobuf2_core et8ek8 smiaregs lis3lv02d_i2c lis3lv02d input_polldev ti_soc_thermal arc4 wl1251_spi wl1251 crc7 mac80211 cfg80211 omap_ssi hsi bq2415x_charger si4713 bq27xxx_battery_i2c bq27xxx_battery leds_lp5523 leds_lp55xx_common adp1653 v4l2_common tsl2563 smc91x mii rtc_twl twl4030_vibra ff_memless twl4030_wdt tsc2005 tsc200x_core omap_sham omap_wdt gpio_keys rx51_battery pwm_omap_dmtimer video_bus_switch videodev media ir_rx51 lirc_dev rc_core
[  152.578277] CPU: 0 PID: 703 Comm: modprobe Tainted: G      D         4.6.0-rc4+ #2
[  152.586059] Hardware name: Nokia RX-51 board
[  152.593811] [<c010bc18>] (unwind_backtrace) from [<c0109f38>] (show_stack+0x10/0x14)
[  152.601806] [<c0109f38>] (show_stack) from [<c0126c70>] (__warn+0xcc/0xf8)
[  152.609619] [<c0126c70>] (__warn) from [<c0126cb8>] (warn_slowpath_null+0x1c/0x20)
[  152.617462] [<c0126cb8>] (warn_slowpath_null) from [<c033260c>] (omap3_l3_app_irq+0xdc/0x124)
[  152.625305] [<c033260c>] (omap3_l3_app_irq) from [<c0154f50>] (handle_irq_event_percpu+0x34/0x138)
[  152.640502] [<c0154f50>] (handle_irq_event_percpu) from [<c01550b0>] (handle_irq_event+0x5c/0x88)
[  152.648254] [<c01550b0>] (handle_irq_event) from [<c0158020>] (handle_level_irq+0xcc/0x130)
[  152.655944] [<c0158020>] (handle_level_irq) from [<c0154930>] (generic_handle_irq+0x18/0x28)
[  152.663574] [<c0154930>] (generic_handle_irq) from [<c0154a50>] (__handle_domain_irq+0x84/0xa8)
[  152.671234] [<c0154a50>] (__handle_domain_irq) from [<c054f914>] (__irq_svc+0x54/0x90)
[  152.678924] [<c054f914>] (__irq_svc) from [<c017b16c>] (acct_collect+0x180/0x1b0)
[  152.686523] [<c017b16c>] (acct_collect) from [<c0128b4c>] (do_exit+0x1d8/0x920)
[  152.694183] [<c0128b4c>] (do_exit) from [<c010a294>] (die+0x358/0x3c0)
[  152.701812] [<c010a294>] (die) from [<c01012ec>] (do_DataAbort+0xa0/0xb4)
[  152.709411] [<c01012ec>] (do_DataAbort) from [<c054f8a0>] (__dabt_svc+0x40/0x60)
[  152.716979] Exception stack(0xcf3d1cf0 to 0xcf3d1d38)
[  152.724456] 1ce0:                                     fa0ab000 00000001 00000000 c0401dc4
[  152.732116] 1d00: fa0ab000 c0976c84 ccbdee10 000000aa 00000016 00000000 00000001 c017637c
[  152.739807] 1d20: 00000000 cf3d1d40 c0402ce8 c0401dc4 60000013 ffffffff
[  152.747528] [<c054f8a0>] (__dabt_svc) from [<c0401dc4>] (musb_default_readb+0x0/0xc)
[  152.755218] [<c0401dc4>] (musb_default_readb) from [<c0402ce8>] (musb_ulpi_write+0x34/0xf8)
[  152.762878] [<c0402ce8>] (musb_ulpi_write) from [<bf2471f8>] (isp1704_charger_probe+0x15c/0x4e0 [isp1704_charger])
[  152.777801] [<bf2471f8>] (isp1704_charger_probe [isp1704_charger]) from [<c03a4578>] (platform_drv_probe+0x58/0xa0)
[  152.792694] [<c03a4578>] (platform_drv_probe) from [<c03a2d64>] (driver_probe_device+0x120/0x2b0)
[  152.800262] [<c03a2d64>] (driver_probe_device) from [<c03a2f74>] (__driver_attach+0x80/0xa4)
[  152.807830] [<c03a2f74>] (__driver_attach) from [<c03a14d4>] (bus_for_each_dev+0x50/0x88)
[  152.815429] [<c03a14d4>] (bus_for_each_dev) from [<c03a2444>] (bus_add_driver+0xc4/0x1e4)
[  152.823028] [<c03a2444>] (bus_add_driver) from [<c03a37e4>] (driver_register+0x9c/0xe0)
[  152.830596] [<c03a37e4>] (driver_register) from [<c0101668>] (do_one_initcall+0xf8/0x1c4)
[  152.838165] [<c0101668>] (do_one_initcall) from [<c019b6e8>] (do_init_module+0x54/0x1ac)
[  152.845642] [<c019b6e8>] (do_init_module) from [<c017904c>] (load_module+0x185c/0x1b14)
[  152.853149] [<c017904c>] (load_module) from [<c0179444>] (SyS_init_module+0x140/0x158)
[  152.860504] [<c0179444>] (SyS_init_module) from [<c0107160>] (ret_fast_syscall+0x0/0x3c)
[  152.867767] ---[ end trace 713e393a1cd324bf ]---
[  152.875610] mtdoops: ready 31, 32 (no erase)
[  257.091827] NET: Registered protocol family 10
[  258.270477] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060
[  258.272277] pgd = cd2b0000
[  258.272949] [fa0ab060] *pgd=48011452(bad)
[  258.274017] Internal error: : 1028 [#2] PREEMPT ARM
[  258.275115] Modules linked in: ipv6 isp1704_charger(+) omap3_isp videobuf2_v4l2 videobuf2_dma_contig videobuf2_memops videobuf2_core et8ek8 smiaregs lis3lv02d_i2c lis3lv02d input_polldev ti_soc_thermal arc4 wl1251_spi wl1251 crc7 mac80211 cfg80211 omap_ssi hsi bq2415x_charger si4713 bq27xxx_battery_i2c bq27xxx_battery leds_lp5523 leds_lp55xx_common adp1653 v4l2_common tsl2563 smc91x mii rtc_twl twl4030_vibra ff_memless twl4030_wdt tsc2005 tsc200x_core omap_sham omap_wdt gpio_keys rx51_battery pwm_omap_dmtimer video_bus_switch videodev media ir_rx51 lirc_dev rc_core
[  258.469055] CPU: 0 PID: 752 Comm: usbnetworking-e Tainted: G      D W       4.6.0-rc4+ #2
[  258.503784] Hardware name: Nokia RX-51 board
[  258.537963] task: cec27700 ti: cf3a8000 task.ti: cf3a8000
[  258.571868] PC is at musb_default_readb+0x0/0xc
[  258.605163] LR is at omap2430_musb_set_mode+0x1c/0x48
[  258.637817] pc : [<c0401dc4>]    lr : [<c040b558>]    psr: a0000093
[  258.637817] sp : cf3a9e98  ip : c074f3fc  fp : 00000000
[  258.701904] r10: cf3a9f80  r9 : 0000000b  r8 : cd2163cc
[  258.732910] r7 : a0000013  r6 : 0000000b  r5 : cd216340  r4 : cf038010
[  258.763488] r3 : c0401dc4  r2 : c040b53c  r1 : 00000060  r0 : fa0ab000
[  258.793395] Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  258.823089] Control: 10c5387d  Table: 8d2b0019  DAC: 00000051
[  258.852325] Process usbnetworking-e (pid: 752, stack limit = 0xcf3a8210)
[  258.881866] Stack: (0xcf3a9e98 to 0xcf3aa000)
[  258.911743] 9e80:                                                       cf038010 c04030a8
[  258.942504] 9ea0: 0000000b cf028eb0 cd216340 cd216340 cd2163c0 c039ecb4 0000000b c0242cc0
[  258.973693] 9ec0: c0242c84 00000000 00000000 c0241ee8 00000000 00000000 c0241db4 000c9c08
[  259.005523] 9ee0: cf32c540 cf3a9f80 0000000b cf3a8000 0000000b c01dbabc cf3a9fb0 10c53c7d
[  259.037475] 9f00: 00000000 00000000 cf32c540 00000002 00000000 0000000b 00000000 cf32c540
[  259.070007] 9f20: 0000000b c01dc30c 00000001 cf32c540 cf3a9f80 0000000b cc0eed74 c014d904
[  259.102020] 9f40: 000c9c08 cf3a9f80 cf32c540 cf32c540 cf32c540 c01dd0a4 cf32c540 000c9c08
[  259.133666] 9f60: 0000000b 00000000 00000000 cf32c540 cf32c540 0000000b 000c9c08 c01dd388
[  259.165527] 9f80: 00000000 00000000 0000000b b6f580e4 0000000b 000c9c08 00000004 c0107324
[  259.197509] 9fa0: 00000000 c0107160 b6f580e4 0000000b 00000001 000c9c08 0000000b b6f1d52c
[  259.228820] 9fc0: b6f580e4 0000000b 000c9c08 00000004 000cbdc8 00000000 00000001 00000000
[  259.259338] 9fe0: 0000000b bef4d9d8 b6f1cb00 b6f4268c 60000010 00000001 00000000 00000000
[  259.289215] [<c0401dc4>] (musb_default_readb) from [<c040b558>] (omap2430_musb_set_mode+0x1c/0x48)
[  259.346862] [<c040b558>] (omap2430_musb_set_mode) from [<c04030a8>] (musb_mode_store+0x9c/0x128)
[  259.376678] [<c04030a8>] (musb_mode_store) from [<c039ecb4>] (dev_attr_store+0x18/0x24)
[  259.406158] [<c039ecb4>] (dev_attr_store) from [<c0242cc0>] (sysfs_kf_write+0x3c/0x48)
[  259.435638] [<c0242cc0>] (sysfs_kf_write) from [<c0241ee8>] (kernfs_fop_write+0x134/0x198)
[  259.465270] [<c0241ee8>] (kernfs_fop_write) from [<c01dbabc>] (__vfs_write+0x2c/0xd4)
[  259.495086] [<c01dbabc>] (__vfs_write) from [<c01dd0a4>] (vfs_write+0xa0/0x18c)
[  259.525360] [<c01dd0a4>] (vfs_write) from [<c01dd388>] (SyS_write+0x3c/0x78)
[  259.555694] [<c01dd388>] (SyS_write) from [<c0107160>] (ret_fast_syscall+0x0/0x3c)
[  259.585968] Code: e12fff1e e2800010 e0810180 e12fff1e (e7d00001) 
[  259.616485] ---[ end trace 713e393a1cd324c0 ]---
[  259.657867] note: usbnetworking-e[752] exited with preempt_count 1
[  259.689178] In-band Error seen by MPU  at address 0
[  259.720031] ------------[ cut here ]------------
[  259.750518] WARNING: CPU: 0 PID: 752 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0xdc/0x124
[  259.781951] Modules linked in: ipv6 isp1704_charger(+) omap3_isp videobuf2_v4l2 videobuf2_dma_contig videobuf2_memops videobuf2_core et8ek8 smiaregs lis3lv02d_i2c lis3lv02d input_polldev ti_soc_thermal arc4 wl1251_spi wl1251 crc7 mac80211 cfg80211 omap_ssi hsi bq2415x_charger si4713 bq27xxx_battery_i2c bq27xxx_battery leds_lp5523 leds_lp55xx_common adp1653 v4l2_common tsl2563 smc91x mii rtc_twl twl4030_vibra ff_memless twl4030_wdt tsc2005 tsc200x_core omap_sham omap_wdt gpio_keys rx51_battery pwm_omap_dmtimer video_bus_switch videodev media ir_rx51 lirc_dev rc_core
[  259.984832] CPU: 0 PID: 752 Comm: usbnetworking-e Tainted: G      D W       4.6.0-rc4+ #2
[  260.019744] Hardware name: Nokia RX-51 board
[  260.054412] [<c010bc18>] (unwind_backtrace) from [<c0109f38>] (show_stack+0x10/0x14)
[  260.090179] [<c0109f38>] (show_stack) from [<c0126c70>] (__warn+0xcc/0xf8)
[  260.126129] [<c0126c70>] (__warn) from [<c0126cb8>] (warn_slowpath_null+0x1c/0x20)
[  260.162567] [<c0126cb8>] (warn_slowpath_null) from [<c033260c>] (omap3_l3_app_irq+0xdc/0x124)
[  260.199432] [<c033260c>] (omap3_l3_app_irq) from [<c0154f50>] (handle_irq_event_percpu+0x34/0x138)
[  260.272827] [<c0154f50>] (handle_irq_event_percpu) from [<c01550b0>] (handle_irq_event+0x5c/0x88)
[  260.310485] [<c01550b0>] (handle_irq_event) from [<c0158020>] (handle_level_irq+0xcc/0x130)
[  260.347564] [<c0158020>] (handle_level_irq) from [<c0154930>] (generic_handle_irq+0x18/0x28)
[  260.384094] [<c0154930>] (generic_handle_irq) from [<c0154a50>] (__handle_domain_irq+0x84/0xa8)
[  260.420928] [<c0154a50>] (__handle_domain_irq) from [<c054f914>] (__irq_svc+0x54/0x90)
[  260.457855] [<c054f914>] (__irq_svc) from [<c017b16c>] (acct_collect+0x180/0x1b0)
[  260.494598] [<c017b16c>] (acct_collect) from [<c0128b4c>] (do_exit+0x1d8/0x920)
[  260.531372] [<c0128b4c>] (do_exit) from [<c010a294>] (die+0x358/0x3c0)
[  260.567901] [<c010a294>] (die) from [<c01012ec>] (do_DataAbort+0xa0/0xb4)
[  260.604827] [<c01012ec>] (do_DataAbort) from [<c054f8a0>] (__dabt_svc+0x40/0x60)
[  260.641540] Exception stack(0xcf3a9e48 to 0xcf3a9e90)
[  260.678009] 9e40:                   fa0ab000 00000060 c040b53c c0401dc4 cf038010 cd216340
[  260.715515] 9e60: 0000000b a0000013 cd2163cc 0000000b cf3a9f80 00000000 c074f3fc cf3a9e98
[  260.753021] 9e80: c040b558 c0401dc4 a0000093 ffffffff
[  260.790588] [<c054f8a0>] (__dabt_svc) from [<c0401dc4>] (musb_default_readb+0x0/0xc)
[  260.828338] [<c0401dc4>] (musb_default_readb) from [<c040b558>] (omap2430_musb_set_mode+0x1c/0x48)
[  260.902191] [<c040b558>] (omap2430_musb_set_mode) from [<c04030a8>] (musb_mode_store+0x9c/0x128)
[  260.939971] [<c04030a8>] (musb_mode_store) from [<c039ecb4>] (dev_attr_store+0x18/0x24)
[  260.977325] [<c039ecb4>] (dev_attr_store) from [<c0242cc0>] (sysfs_kf_write+0x3c/0x48)
[  261.014160] [<c0242cc0>] (sysfs_kf_write) from [<c0241ee8>] (kernfs_fop_write+0x134/0x198)
[  261.050506] [<c0241ee8>] (kernfs_fop_write) from [<c01dbabc>] (__vfs_write+0x2c/0xd4)
[  261.086517] [<c01dbabc>] (__vfs_write) from [<c01dd0a4>] (vfs_write+0xa0/0x18c)
[  261.122406] [<c01dd0a4>] (vfs_write) from [<c01dd388>] (SyS_write+0x3c/0x78)
[  261.158172] [<c01dd388>] (SyS_write) from [<c0107160>] (ret_fast_syscall+0x0/0x3c)
[  261.193572] ---[ end trace 713e393a1cd324c1 ]---
[  261.232757] mtdoops: ready 32, 33
[  367.338836] ubi0: attaching mtd5
[  367.465057] ubi0: scanning is finished
[  367.474395] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 20, need 40
[  367.483673] ubi0: attached mtd5 (name "rootfs", size 251 MiB)
[  367.487335] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[  367.510803] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[  367.526824] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[  367.530792] ubi0: good PEBs: 2010, bad PEBs: 0, corrupted PEBs: 0
[  367.538665] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[  367.543029] ubi0: max/mean erase counter: 83/37, WL threshold: 4096, image sequence number: 25
[  367.547393] ubi0: available PEBs: 0, total reserved PEBs: 2010, PEBs reserved for bad PEB handling: 20
[  367.555938] ubi0: background thread "ubi_bgt0d" started, PID 878
[  367.601104] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 883
[  367.634307] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[  367.640075] UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[  367.651916] UBIFS (ubi0:0): FS size: 254822400 bytes (243 MiB, 1975 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
[  367.665130] UBIFS (ubi0:0): reserved for root: 4190434 bytes (4092 KiB)
[  367.671997] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 274FF656-4762-4CA0-A373-7005B2003DFC, small LPT model

Re: [PATCH 00/10] Get MUSB PM runtime working again

[Tony Lindgren]

* Ivaylo Dimitrov <ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> [160430 23:34]:
> 
> Unfortunately that makes my n900 unbootable with USB cable detached, see the
> attached file (at [  152.121673]) when there is USB cable. I guess we're
> missing a couple of pm_runtime_get()/put() calls.

OK so it seems. I did some brief testing with n900 too, but never
hit this so far. Care to email me the kernel .config you're using
so I can try to reproduce it here?

> [  152.121673] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab001
...

> [  152.403594] [<c0401dc4>] (musb_default_readb) from [<c0402ce8>] (musb_ulpi_write+0x34/0xf8)
> [  152.409454] [<c0402ce8>] (musb_ulpi_write) from [<bf2471f8>] (isp1704_charger_probe+0x15c/0x4e0 [isp1704_charger])
> [  152.421325] [<bf2471f8>] (isp1704_charger_probe [isp1704_charger]) from [<c03a4578>] (platform_drv_probe+0x58/0xa0)
> [  152.433624] [<c03a4578>] (platform_drv_probe) from [<c03a2d64>] (driver_probe_device+0x120/0x2b0)
> [  152.440093] [<c03a2d64>] (driver_probe_device) from [<c03a2f74>] (__driver_attach+0x80/0xa4)
> [  152.446624] [<c03a2f74>] (__driver_attach) from [<c03a14d4>] (bus_for_each_dev+0x50/0x88)
> [  152.453155] [<c03a14d4>] (bus_for_each_dev) from [<c03a2444>] (bus_add_driver+0xc4/0x1e4)
> [  152.459716] [<c03a2444>] (bus_add_driver) from [<c03a37e4>] (driver_register+0x9c/0xe0)
> [  152.466247] [<c03a37e4>] (driver_register) from [<c0101668>] (do_one_initcall+0xf8/0x1c4)
> [  152.472839] [<c0101668>] (do_one_initcall) from [<c019b6e8>] (do_init_module+0x54/0x1ac)
> [  152.479400] [<c019b6e8>] (do_init_module) from [<c017904c>] (load_module+0x185c/0x1b14)
> [  152.485961] [<c017904c>] (load_module) from [<c0179444>] (SyS_init_module+0x140/0x158)
> [  152.492553] [<c0179444>] (SyS_init_module) from [<c0107160>] (ret_fast_syscall+0x0/0x3c)

Yeah looks like a case of missing PM runtime get/put.

Also, I'm aware of some remaining phy-twl4030-usb issues with
having cable plugged in on the boot. Will send patches for those
after the MUSB core issues are out of the way.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 00/10] Get MUSB PM runtime working again

[Ivaylo Dimitrov]

[-- Attachment #1: Type: text/plain, Size: 2965 bytes --]

Hi,

On  3.05.2016 19:25, Tony Lindgren wrote:
> * Ivaylo Dimitrov <ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> [160430 23:34]:
>>
>> Unfortunately that makes my n900 unbootable with USB cable detached, see the
>> attached file (at [  152.121673]) when there is USB cable. I guess we're
>> missing a couple of pm_runtime_get()/put() calls.
>
> OK so it seems. I did some brief testing with n900 too, but never
> hit this so far. Care to email me the kernel .config you're using
> so I can try to reproduce it here?
>

.config is attached. There is stuff in it still to be upstreamed, just 
ignore it :). Or, you may pull 
https://github.com/freemangordon/linux-n900/commits/v4.6-rc4-n900-camera, apply 
the $subject series on top of it and build rx51_defconfig. There 
shouldn't be any patches touching USB.

Does bqXXX and isp1707_charger modules got loaded when you tested it? Or 
those were built-in? or not built at all? As it seems the problem arises 
when those try to touch USB ULPI.

>> [  152.121673] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab001
> ...
>
>> [  152.403594] [<c0401dc4>] (musb_default_readb) from [<c0402ce8>] (musb_ulpi_write+0x34/0xf8)
>> [  152.409454] [<c0402ce8>] (musb_ulpi_write) from [<bf2471f8>] (isp1704_charger_probe+0x15c/0x4e0 [isp1704_charger])
>> [  152.421325] [<bf2471f8>] (isp1704_charger_probe [isp1704_charger]) from [<c03a4578>] (platform_drv_probe+0x58/0xa0)
>> [  152.433624] [<c03a4578>] (platform_drv_probe) from [<c03a2d64>] (driver_probe_device+0x120/0x2b0)
>> [  152.440093] [<c03a2d64>] (driver_probe_device) from [<c03a2f74>] (__driver_attach+0x80/0xa4)
>> [  152.446624] [<c03a2f74>] (__driver_attach) from [<c03a14d4>] (bus_for_each_dev+0x50/0x88)
>> [  152.453155] [<c03a14d4>] (bus_for_each_dev) from [<c03a2444>] (bus_add_driver+0xc4/0x1e4)
>> [  152.459716] [<c03a2444>] (bus_add_driver) from [<c03a37e4>] (driver_register+0x9c/0xe0)
>> [  152.466247] [<c03a37e4>] (driver_register) from [<c0101668>] (do_one_initcall+0xf8/0x1c4)
>> [  152.472839] [<c0101668>] (do_one_initcall) from [<c019b6e8>] (do_init_module+0x54/0x1ac)
>> [  152.479400] [<c019b6e8>] (do_init_module) from [<c017904c>] (load_module+0x185c/0x1b14)
>> [  152.485961] [<c017904c>] (load_module) from [<c0179444>] (SyS_init_module+0x140/0x158)
>> [  152.492553] [<c0179444>] (SyS_init_module) from [<c0107160>] (ret_fast_syscall+0x0/0x3c)
>
> Yeah looks like a case of missing PM runtime get/put.
>
> Also, I'm aware of some remaining phy-twl4030-usb issues with
> having cable plugged in on the boot. Will send patches for those
> after the MUSB core issues are out of the way.
>

Hmm, maybe I was unclear - with no cable attached I am unable to boot 
the device at all, is it goes in an oops loop. Unfortunately I can't 
provide logs as I don't have serial port cable attached to my device(it 
is production device). The logs I provided are taken with USB cable 
attached at boot.

Thanks,
Ivo

[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 113901 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 4.6.0-rc4 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_ARM_DMA_USE_IOMMU=y
CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_BANDGAP=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_FHANDLE is not set
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_HANDLE_DOMAIN_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_CLOCKEVENTS=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_USERFAULTFD is not set
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_THROTTLING is not set
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_FREEZER=y

#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set

#
# Multiple platform selection
#

#
# CPU Core family selection
#
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_ALPINE is not set
# CONFIG_ARCH_ARTPEC is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_DIGICOLOR is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MEDIATEK is not set
CONFIG_ARCH_OMAP=y

#
# TI OMAP Common Features
#

#
# OMAP Feature Selections
#
CONFIG_POWER_AVS_OMAP=y
CONFIG_POWER_AVS_OMAP_CLASS3=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_GPIO_SWITCH=y
CONFIG_OMAP_MUX=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE=y
CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID=43
CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_PM_NOOP=y
CONFIG_MACH_OMAP_GENERIC=y

#
# TI OMAP/AM/DM/DRA Family
#
CONFIG_ARCH_OMAP3=y
# CONFIG_ARCH_OMAP4 is not set
# CONFIG_SOC_OMAP5 is not set
# CONFIG_SOC_AM33XX is not set
# CONFIG_SOC_AM43XX is not set
# CONFIG_SOC_DRA7XX is not set
CONFIG_ARCH_OMAP2PLUS=y

#
# TI OMAP2/3/4 Specific Features
#
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_SOC_HAS_OMAP2_SDRC=y
CONFIG_SOC_OMAP3430=y
# CONFIG_SOC_TI81XX is not set
CONFIG_OMAP_PACKAGE_CBB=y

#
# OMAP Legacy Platform Data Board Type
#
# CONFIG_MACH_OMAP_LDP is not set
# CONFIG_MACH_OMAP3517EVM is not set
# CONFIG_MACH_OMAP3_PANDORA is not set
CONFIG_MACH_NOKIA_RX51=y
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_RENESAS is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_TANGO is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UNIPHIER is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZX is not set
# CONFIG_ARCH_ZYNQ is not set

#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y

#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_VIRT_EXT=y
# CONFIG_SWP_EMULATE is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
# CONFIG_VDSO is not set
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_ALIGN_RODATA=y
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_ARM_ERRATA_430973=y
# CONFIG_ARM_ERRATA_720789 is not set
# CONFIG_ARM_ERRATA_754322 is not set
# CONFIG_ARM_ERRATA_775420 is not set
# CONFIG_ARM_ERRATA_773022 is not set

#
# Bus support
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS_GENERIC is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
CONFIG_HAVE_SMP=y
# CONFIG_SMP is not set
# CONFIG_HAVE_ARM_ARCH_TIMER is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=0
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_ARM_PATCH_IDIV=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_CPU_SW_DOMAIN_PAN=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ARM_MODULE_PLTS is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
# CONFIG_XEN is not set

#
# Boot options
#
CONFIG_USE_OF=y
CONFIG_ATAGS=y
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw mtdoops.mtddev=log console=tty0 console=ttyO2 omapfb_vram=7M omapfb.mode=lcd:848x480-16 nokia-modem.pm=0"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y
# CONFIG_EFI is not set

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
# CONFIG_QORIQ_CPUFREQ is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# ARM CPU Idle Drivers
#
# CONFIG_ARM_CPUIDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
CONFIG_KERNEL_MODE_NEON=y

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_REDIRECT is not set
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_NAT is not set
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
# CONFIG_NF_NAT_MASQUERADE_IPV4 is not set
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_RPFILTER is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_NF_NAT_IPV6 is not set
CONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_HL is not set
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
# CONFIG_IP6_NF_MATCH_MH is not set
# CONFIG_IP6_NF_MATCH_RT is not set
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
# CONFIG_IP6_NF_MANGLE is not set
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_IP6_NF_NAT is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_PHONET=y
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=m
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
# CONFIG_NET_SCH_PLUG is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
# CONFIG_GACT_PROB is not set
# CONFIG_NET_ACT_MIRRED is not set
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_SOCK_CGROUP_DATA is not set
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_LEDS is not set
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
CONFIG_BT_NOKIA_H4P=m
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_MINSTREL_HT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
CONFIG_ARM_CCI=y
CONFIG_ARM_CCI_PMU=y
CONFIG_ARM_CCI400_COMMON=y
CONFIG_ARM_CCI400_PMU=y
# CONFIG_ARM_CCI5xx_PMU is not set
# CONFIG_ARM_CCN is not set
# CONFIG_BRCMSTB_GISB_ARB is not set
CONFIG_OMAP_INTERCONNECT=y
# CONFIG_OMAP_OCP2SCP is not set
# CONFIG_VEXPRESS_CONFIG is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=y
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_NAND is not set
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
# CONFIG_MTD_ONENAND_GENERIC is not set
CONFIG_MTD_ONENAND_OMAP2=y
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_LPDDR2_NVM is not set
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MTD=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_SENSORS_LIS3_I2C=m

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_KERNEL_API is not set
# CONFIG_CXL_EEH is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
CONFIG_ETHERNET=y
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC91X=m
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_WLAN=y
# CONFIG_WLAN_VENDOR_ADMTEK is not set
# CONFIG_WLAN_VENDOR_ATH is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
# CONFIG_WLAN_VENDOR_CISCO is not set
# CONFIG_WLAN_VENDOR_INTEL is not set
# CONFIG_WLAN_VENDOR_INTERSIL is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
# CONFIG_WLAN_VENDOR_RALINK is not set
# CONFIG_WLAN_VENDOR_REALTEK is not set
# CONFIG_WLAN_VENDOR_RSI is not set
# CONFIG_WLAN_VENDOR_ST is not set
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
# CONFIG_WL1251_SDIO is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_MATRIX=y
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_FT6236 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
# CONFIG_TOUCHSCREEN_TSC2004 is not set
CONFIG_TOUCHSCREEN_TSC2005=m
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_MVEBU_UART is not set
CONFIG_TTY_PRINTK=y
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_OMAP is not set
CONFIG_HW_RANDOM_OMAP3_ROM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_TI_QSPI is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#
CONFIG_OMAP_SSI=m
CONFIG_OMAP_SSI_PORT=m

#
# HSI clients
#
CONFIG_NOKIA_MODEM=m
CONFIG_CMT_SPEECH=m
CONFIG_SSI_PROTOCOL=m
CONFIG_HSI_CHAR=m

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_SINGLE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_MPC8XXX is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_ZEVIO is not set
# CONFIG_GPIO_ZX is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TPIC2810 is not set

#
# MFD GPIO expanders
#
CONFIG_GPIO_TWL4030=y

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set

#
# SPI or I2C GPIO expanders
#
# CONFIG_GPIO_MCP23S08 is not set

#
# USB GPIO expanders
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_BATTERY_TWL4030_MADC is not set
CONFIG_BATTERY_RX51=m
CONFIG_CHARGER_ISP1704=m
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_TWL4030_MADC=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
CONFIG_CPU_THERMAL=y
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_IMX_THERMAL is not set

#
# Texas Instruments thermal drivers
#
CONFIG_TI_SOC_THERMAL=m
CONFIG_TI_THERMAL=y
CONFIG_OMAP3_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8921_CORE is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_POWER=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MT6311 is not set
CONFIG_REGULATOR_PBIAS=y
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TWL4030=y
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
# CONFIG_MEDIA_CONTROLLER_DVB is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
# CONFIG_TTPCI_EEPROM is not set

#
# Media drivers
#
CONFIG_RC_CORE=m
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
# CONFIG_IR_NEC_DECODER is not set
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_SANYO_DECODER is not set
# CONFIG_IR_SHARP_DECODER is not set
# CONFIG_IR_MCE_KBD_DECODER is not set
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
# CONFIG_IR_HIX5HD2 is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
CONFIG_IR_RX51=m
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
# CONFIG_MEDIA_USB_SUPPORT is not set
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_OMAP2_VOUT is not set
CONFIG_VIDEO_OMAP3=m
CONFIG_VIDEO_OMAP3_DEBUG=y
CONFIG_VIDEO_BUS_SWITCH=m
# CONFIG_SOC_CAMERA is not set
# CONFIG_VIDEO_XILINX is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
CONFIG_RADIO_SI4713=m
# CONFIG_USB_SI4713 is not set
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_CYPRESS_FIRMWARE is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_MEDIA_ATTACH=y
# CONFIG_VIDEO_IR_I2C is not set

#
# Encoders, decoders, sensors and other helper chips
#

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set

#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set

#
# Camera sensor devices
#
CONFIG_VIDEO_SMIAPP_PLL=m
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
CONFIG_VIDEO_SMIAPP=m
CONFIG_VIDEO_ET8EK8=m
# CONFIG_VIDEO_S5C73M3 is not set

#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
# CONFIG_VIDEO_AS3645A is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_SIMPLE is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA18271 is not set
# CONFIG_MEDIA_TUNER_TDA9887 is not set
# CONFIG_MEDIA_TUNER_TEA5761 is not set
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_MSI001 is not set
# CONFIG_MEDIA_TUNER_MT20XX is not set
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2063 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not set
# CONFIG_MEDIA_TUNER_XC5000 is not set
# CONFIG_MEDIA_TUNER_XC4000 is not set
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
# CONFIG_MEDIA_TUNER_MC44S803 is not set
# CONFIG_MEDIA_TUNER_MAX2165 is not set
# CONFIG_MEDIA_TUNER_TDA18218 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
# CONFIG_MEDIA_TUNER_FC0012 is not set
# CONFIG_MEDIA_TUNER_FC0013 is not set
# CONFIG_MEDIA_TUNER_TDA18212 is not set
# CONFIG_MEDIA_TUNER_E4000 is not set
# CONFIG_MEDIA_TUNER_FC2580 is not set
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
# CONFIG_MEDIA_TUNER_TUA9001 is not set
# CONFIG_MEDIA_TUNER_SI2157 is not set
# CONFIG_MEDIA_TUNER_IT913X is not set
# CONFIG_MEDIA_TUNER_R820T is not set
# CONFIG_MEDIA_TUNER_MXL301RF is not set
# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set

#
# Customise DVB Frontends
#
# CONFIG_DVB_AU8522_V4L is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
# CONFIG_DVB_TUNER_DIB0090 is not set

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_DRM is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_AMD_ACP is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_OMAP2_VRFB=y
CONFIG_FB_OMAP2=y
# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
CONFIG_FB_OMAP2_NUM_FBS=3
CONFIG_FB_OMAP2_DSS_INIT=y
CONFIG_FB_OMAP2_DSS=y
# CONFIG_FB_OMAP2_DSS_DEBUG is not set
# CONFIG_FB_OMAP2_DSS_DEBUGFS is not set
# CONFIG_FB_OMAP2_DSS_DPI is not set
CONFIG_FB_OMAP2_DSS_VENC=y
# CONFIG_FB_OMAP4_DSS_HDMI is not set
# CONFIG_FB_OMAP5_DSS_HDMI is not set
CONFIG_FB_OMAP2_DSS_SDI=y
# CONFIG_FB_OMAP2_DSS_DSI is not set
CONFIG_FB_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_FB_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y

#
# OMAPFB Panel and Encoder Drivers
#
# CONFIG_FB_OMAP2_ENCODER_OPA362 is not set
# CONFIG_FB_OMAP2_ENCODER_TFP410 is not set
# CONFIG_FB_OMAP2_ENCODER_TPD12S015 is not set
# CONFIG_FB_OMAP2_CONNECTOR_DVI is not set
# CONFIG_FB_OMAP2_CONNECTOR_HDMI is not set
# CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV is not set
# CONFIG_FB_OMAP2_PANEL_DPI is not set
# CONFIG_FB_OMAP2_PANEL_DSI_CM is not set
CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=y
# CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02 is not set
# CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01 is not set
# CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1 is not set
# CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11 is not set
# CONFIG_FB_SSD1307 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_PANDORA is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_PVR=m
CONFIG_PVR_RELEASE=y
# CONFIG_PVR_DEBUG is not set
# CONFIG_PVR_TIMING is not set
# CONFIG_PVR_EXAMPLES is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set

#
# HD-Audio
#
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
# CONFIG_SND_SOC_AMD_ACP is not set
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_DAVINCI_SOC_MCASP is not set
# CONFIG_SND_DESIGNWARE_I2S is not set

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
# CONFIG_SND_SOC_IMX_AUDMUX is not set
CONFIG_SND_OMAP_SOC=y
CONFIG_SND_OMAP_SOC_MCBSP=y
# CONFIG_SND_OMAP_SOC_HDMI_AUDIO is not set
CONFIG_SND_OMAP_SOC_RX51=y
# CONFIG_SND_OMAP_SOC_OMAP_TWL4030 is not set
# CONFIG_SND_SOC_IMG is not set

#
# Allwinner SoC Audio support
#
# CONFIG_SND_SUN4I_CODEC is not set
# CONFIG_SND_SUN4I_SPDIF is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
# CONFIG_SND_SOC_AC97_CODEC is not set
# CONFIG_SND_SOC_ADAU1701 is not set
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
# CONFIG_SND_SOC_CS4349 is not set
# CONFIG_SND_SOC_ES8328 is not set
# CONFIG_SND_SOC_GTM601 is not set
# CONFIG_SND_SOC_INNO_RK3036 is not set
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM179X_I2C is not set
# CONFIG_SND_SOC_PCM179X_SPI is not set
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM3168A_SPI is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
# CONFIG_SND_SOC_RT5616 is not set
# CONFIG_SND_SOC_RT5631 is not set
# CONFIG_SND_SOC_RT5677_SPI is not set
# CONFIG_SND_SOC_SGTL5000 is not set
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
# CONFIG_SND_SOC_SPDIF is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM2602_I2C is not set
# CONFIG_SND_SOC_SSM4567 is not set
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_STI_SAS is not set
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TFA9879 is not set
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not set
CONFIG_SND_SOC_TLV320AIC3X=y
# CONFIG_SND_SOC_TS3A227E is not set
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
# CONFIG_SND_SOC_WM8753 is not set
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8804_I2C is not set
# CONFIG_SND_SOC_WM8804_SPI is not set
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
CONFIG_SND_SOC_TPA6130A2=y
# CONFIG_SND_SIMPLE_CARD is not set
# CONFIG_SOUND_PRIME is not set

#
# HID support
#
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OTG_FSM is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y

#
# Platform Glue Layer
#
CONFIG_USB_MUSB_OMAP2PLUS=y
# CONFIG_USB_MUSB_AM35X is not set
# CONFIG_USB_MUSB_DSPS is not set

#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
# CONFIG_AM335X_PHY_USB is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_GADGET_XILINX is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_U_ETHER=y
CONFIG_USB_F_OBEX=y
CONFIG_USB_F_ECM=y
CONFIG_USB_F_PHONET=y
CONFIG_USB_F_MASS_STORAGE=y
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
CONFIG_USB_G_NOKIA=y
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_DW is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set

#
# LED drivers
#
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP55XX_COMMON=m
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=m
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL32XX is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12057 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=m
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RV8803 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_OMAP is not set
# CONFIG_RTC_DRV_SNVS is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_DMA_OMAP=y
# CONFIG_FSL_EDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_NBPFAXI_DMA is not set
# CONFIG_TI_CPPI41 is not set
# CONFIG_TI_EDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_R8188EU is not set
# CONFIG_VT6656 is not set

#
# IIO staging drivers
#

#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16203 is not set
# CONFIG_ADIS16204 is not set
# CONFIG_ADIS16209 is not set
# CONFIG_ADIS16220 is not set
# CONFIG_ADIS16240 is not set
# CONFIG_LIS3L02DQ is not set

#
# Analog to digital converters
#
# CONFIG_AD7606 is not set
# CONFIG_AD7780 is not set
# CONFIG_AD7816 is not set
# CONFIG_AD7192 is not set
# CONFIG_AD7280 is not set

#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set

#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
# CONFIG_AD7152 is not set
# CONFIG_AD7746 is not set

#
# Direct Digital Synthesis
#
# CONFIG_AD9832 is not set
# CONFIG_AD9834 is not set

#
# Digital gyroscope sensors
#
# CONFIG_ADIS16060 is not set

#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set

#
# Light sensors
#
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL2x7x is not set

#
# Active energy metering IC
#
# CONFIG_ADE7753 is not set
# CONFIG_ADE7754 is not set
# CONFIG_ADE7758 is not set
# CONFIG_ADE7759 is not set
# CONFIG_ADE7854 is not set

#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
# CONFIG_AD2S1200 is not set
# CONFIG_AD2S1210 is not set

#
# Triggers - standalone
#
CONFIG_TIDSPBRIDGE=m
CONFIG_TIDSPBRIDGE_DVFS=y
CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
CONFIG_TIDSPBRIDGE_RECOVERY=y
# CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
CONFIG_TIDSPBRIDGE_NTFY_PWRERR=y
CONFIG_TIDSPBRIDGE_BACKTRACE=y
# CONFIG_TIDSPBRIDGE_NEW_API is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
CONFIG_STAGING_MEDIA=y
CONFIG_I2C_BCM2048=m
# CONFIG_LIRC_STAGING is not set

#
# Android
#
# CONFIG_STAGING_BOARD is not set
# CONFIG_LTE_GDM724X is not set
# CONFIG_LNET is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_FB_TFT is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_MOST is not set
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_TI_32K=y
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_OMAP2PLUS_MBOX=y
CONFIG_OMAP_MBOX_KFIFO_SIZE=256
# CONFIG_ALTERA_MBOX is not set
# CONFIG_MAILBOX_TEST is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
CONFIG_OF_IOMMU=y
CONFIG_OMAP_IOMMU=y
# CONFIG_OMAP_IOMMU_DEBUG is not set
# CONFIG_ARM_SMMU is not set

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
# CONFIG_TI_EMIF is not set
CONFIG_OMAP_GPMC=y
# CONFIG_OMAP_GPMC_DEBUG is not set
CONFIG_IIO=y
# CONFIG_IIO_BUFFER is not set
# CONFIG_IIO_CONFIGFS is not set
# CONFIG_IIO_TRIGGER is not set
# CONFIG_IIO_SW_TRIGGER is not set

#
# Accelerometers
#
# CONFIG_BMA180 is not set
# CONFIG_BMC150_ACCEL is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
# CONFIG_KXSD9 is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
# CONFIG_MMA8452 is not set
# CONFIG_MMA9551 is not set
# CONFIG_MMA9553 is not set
# CONFIG_MXC4005 is not set
# CONFIG_MXC6255 is not set
# CONFIG_STK8312 is not set

#
# Analog to digital converters
#
# CONFIG_AD7266 is not set
# CONFIG_AD7291 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7791 is not set
# CONFIG_AD7793 is not set
# CONFIG_AD7887 is not set
# CONFIG_AD7923 is not set
# CONFIG_AD799X is not set
# CONFIG_CC10001_ADC is not set
# CONFIG_HI8435 is not set
# CONFIG_INA2XX_ADC is not set
# CONFIG_MAX1027 is not set
# CONFIG_MAX1363 is not set
# CONFIG_MCP320X is not set
# CONFIG_MCP3422 is not set
# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not set
# CONFIG_TI_ADC0832 is not set
# CONFIG_TI_ADC128S052 is not set
# CONFIG_TI_ADS1015 is not set
# CONFIG_TI_ADS8688 is not set
CONFIG_TWL4030_MADC=y
# CONFIG_TWL6030_GPADC is not set
# CONFIG_VF610_ADC is not set

#
# Amplifiers
#
# CONFIG_AD8366 is not set

#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_IAQCORE is not set
# CONFIG_VZ89X is not set

#
# Hid Sensor IIO Common
#

#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORHUB is not set

#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5449 is not set
# CONFIG_AD5504 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_AD5686 is not set
# CONFIG_AD5755 is not set
# CONFIG_AD5761 is not set
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD7303 is not set
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
# CONFIG_MAX5821 is not set
# CONFIG_MCP4725 is not set
# CONFIG_MCP4922 is not set
# CONFIG_VF610_DAC is not set

#
# IIO dummy driver
#
# CONFIG_IIO_SIMPLE_DUMMY is not set

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set

#
# Digital gyroscope sensors
#
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
# CONFIG_ADIS16136 is not set
# CONFIG_ADIS16260 is not set
# CONFIG_ADXRS450 is not set
# CONFIG_BMG160 is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set

#
# Health Sensors
#

#
# Heart Rate Monitors
#
# CONFIG_AFE4403 is not set
# CONFIG_AFE4404 is not set
# CONFIG_MAX30100 is not set

#
# Humidity sensors
#
# CONFIG_DHT11 is not set
# CONFIG_HDC100X is not set
# CONFIG_HTU21 is not set
# CONFIG_SI7005 is not set
# CONFIG_SI7020 is not set

#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
# CONFIG_ADIS16480 is not set
# CONFIG_KMX61 is not set
# CONFIG_INV_MPU6050_SPI is not set

#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
# CONFIG_AL3320A is not set
# CONFIG_APDS9300 is not set
# CONFIG_APDS9960 is not set
# CONFIG_BH1750 is not set
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
# CONFIG_CM36651 is not set
# CONFIG_GP2AP020A00F is not set
# CONFIG_ISL29125 is not set
# CONFIG_JSA1212 is not set
# CONFIG_RPR0521 is not set
# CONFIG_LTR501 is not set
# CONFIG_OPT3001 is not set
# CONFIG_PA12203001 is not set
# CONFIG_STK3310 is not set
# CONFIG_TCS3414 is not set
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=m
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
# CONFIG_VCNL4000 is not set

#
# Magnetometer sensors
#
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
# CONFIG_BMC150_MAGN is not set
# CONFIG_MAG3110 is not set
# CONFIG_MMC35240 is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_HMC5843_SPI is not set

#
# Inclinometer sensors
#

#
# Digital potentiometers
#
# CONFIG_MCP4531 is not set
# CONFIG_TPL0102 is not set

#
# Pressure sensors
#
# CONFIG_BMP280 is not set
# CONFIG_MPL115_I2C is not set
# CONFIG_MPL115_SPI is not set
# CONFIG_MPL3115 is not set
# CONFIG_MS5611 is not set
# CONFIG_MS5637 is not set
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_T5403 is not set

#
# Lightning sensors
#
# CONFIG_AS3935 is not set

#
# Proximity sensors
#
# CONFIG_LIDAR_LITE_V2 is not set
# CONFIG_SX9500 is not set

#
# Temperature sensors
#
# CONFIG_MLX90614 is not set
# CONFIG_TMP006 is not set
# CONFIG_TSYS01 is not set
# CONFIG_TSYS02D is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_FSL_FTM is not set
CONFIG_PWM_OMAP_DMTIMER=m
# CONFIG_PWM_PCA9685 is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
# CONFIG_PWM_TWL is not set
# CONFIG_PWM_TWL_LED is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_OMAP_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_DM816X_USB is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_OMAP_CONTROL_PHY=y
CONFIG_TWL4030_USB=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# CONFIG_ARM_PMU is not set
# CONFIG_RAS is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_NVMEM is not set
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# Firmware Drivers
#
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_HAVE_ARM_SMCCC=y

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=m
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=m
# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
# CONFIG_SQUASHFS_XATTR is not set
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
# CONFIG_SQUASHFS_LZO is not set
# CONFIG_SQUASHFS_XZ is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
CONFIG_CIFS_SMB2=y
CONFIG_CIFS_SMB311=y
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_PREEMPT is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM_PTDUMP is not set
CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
# CONFIG_DEBUG_UART_8250 is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
# CONFIG_ARM_KPROBES_TEST is not set
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_CORESIGHT is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
# CONFIG_CRYPTO_RSA is not set
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_ENGINE=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_OMAP_SHAM=m
CONFIG_CRYPTO_DEV_OMAP_AES=m
# CONFIG_CRYPTO_DEV_OMAP_DES is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_ARM_CRYPTO=y
# CONFIG_CRYPTO_SHA1_ARM is not set
# CONFIG_CRYPTO_SHA1_ARM_NEON is not set
# CONFIG_CRYPTO_SHA1_ARM_CE is not set
# CONFIG_CRYPTO_SHA2_ARM_CE is not set
# CONFIG_CRYPTO_SHA256_ARM is not set
# CONFIG_CRYPTO_SHA512_ARM is not set
CONFIG_CRYPTO_AES_ARM=m
CONFIG_CRYPTO_AES_ARM_BS=m
# CONFIG_CRYPTO_AES_ARM_CE is not set
# CONFIG_CRYPTO_GHASH_ARM_CE is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=m
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
# CONFIG_VIRTUALIZATION is not set

Re: [PATCH 02/10] usb: musb: Fix idling after host mode by increasing autosuspend delay

[Bin Liu]

Hi,

On Thu, Apr 28, 2016 at 10:33:12AM -0700, Tony Lindgren wrote:
> Looks like at least 2430 glue won't idle reliably with the 200 ms
> autosuspend delay. This causes deeper idle states being blocked for
> the whole SoC when disconnecting OTG A cable.
> 
> Increasing the delay to 500 ms seems to idle both MUSB and the PHY
> reliably. This is probably because of time needed by the hardware
> based negotiation between MUSB and the PHY.

Unless we know other glues also have the same issue, this change
affects other glues, right? Can we just increase it for 2430 only?

Regards,
-Bin.

> 
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
>  drivers/usb/musb/musb_core.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> index 39fd958..5fa6187 100644
> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c
> @@ -2030,7 +2030,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
>  
>  	/* We need musb_read/write functions initialized for PM */
>  	pm_runtime_use_autosuspend(musb->controller);
> -	pm_runtime_set_autosuspend_delay(musb->controller, 200);
> +	pm_runtime_set_autosuspend_delay(musb->controller, 500);
>  	pm_runtime_enable(musb->controller);
>  
>  	/* The musb_platform_init() call:
> -- 
> 2.8.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 02/10] usb: musb: Fix idling after host mode by increasing autosuspend delay

[Tony Lindgren]

* Bin Liu <b-liu-l0cyMroinI0@public.gmane.org> [160505 08:04]:
> Hi,
> 
> On Thu, Apr 28, 2016 at 10:33:12AM -0700, Tony Lindgren wrote:
> > Looks like at least 2430 glue won't idle reliably with the 200 ms
> > autosuspend delay. This causes deeper idle states being blocked for
> > the whole SoC when disconnecting OTG A cable.
> > 
> > Increasing the delay to 500 ms seems to idle both MUSB and the PHY
> > reliably. This is probably because of time needed by the hardware
> > based negotiation between MUSB and the PHY.
> 
> Unless we know other glues also have the same issue, this change
> affects other glues, right? Can we just increase it for 2430 only?

Well it's hard to say with no PM working with other glue layers right
now. I would not be suprised if similar issue exists with other phys
too talking with musb.

Does the current 200 ms autosuspend timeout relate to anything real
other than what I found out with my measurements?

If there's no other data available for the 200 ms timeout, I suggest
we just set it to 500 ms and add comments there that at least 2430
glue needs that. If things are not idling properly for the whole
SoC because musb, the power consumption will be way worse than any
power savings between 200 and 500 ms :)

BTW, I noticed 300 ms did not make a difference there, and 500 ms
seems to work so far.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 02/10] usb: musb: Fix idling after host mode by increasing autosuspend delay

[Bin Liu]

Hi,

On Thu, May 05, 2016 at 10:04:39AM -0700, Tony Lindgren wrote:
> * Bin Liu <b-liu-l0cyMroinI0@public.gmane.org> [160505 08:04]:
> > Hi,
> > 
> > On Thu, Apr 28, 2016 at 10:33:12AM -0700, Tony Lindgren wrote:
> > > Looks like at least 2430 glue won't idle reliably with the 200 ms
> > > autosuspend delay. This causes deeper idle states being blocked for
> > > the whole SoC when disconnecting OTG A cable.
> > > 
> > > Increasing the delay to 500 ms seems to idle both MUSB and the PHY
> > > reliably. This is probably because of time needed by the hardware
> > > based negotiation between MUSB and the PHY.
> > 
> > Unless we know other glues also have the same issue, this change
> > affects other glues, right? Can we just increase it for 2430 only?
> 
> Well it's hard to say with no PM working with other glue layers right
> now. I would not be suprised if similar issue exists with other phys

Right.

> too talking with musb.
> 
> Does the current 200 ms autosuspend timeout relate to anything real
> other than what I found out with my measurements?

Not sure, I didn't checkk where the 200ms comes from.

> 
> If there's no other data available for the 200 ms timeout, I suggest
> we just set it to 500 ms and add comments there that at least 2430
> glue needs that. If things are not idling properly for the whole
> SoC because musb, the power consumption will be way worse than any
> power savings between 200 and 500 ms :)

Yeah, make sense.

> 
> BTW, I noticed 300 ms did not make a difference there, and 500 ms
> seems to work so far.
> 
> Regards,
> 
> Tony

Regards,
-Bin.

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 04/10] usb: musb: Remove unnecessary shutdown function

[Bin Liu]

Hi,

On Thu, Apr 28, 2016 at 10:33:14AM -0700, Tony Lindgren wrote:
> We have remove() already calling shutdown(), so let's drop it
> and move the code to remove().
> 
> Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
>  drivers/usb/musb/musb_core.c | 39 ++++++++++++++-------------------------
>  1 file changed, 14 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> index 5fa6187..d7af8ed 100644
> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c
> @@ -1090,29 +1090,6 @@ void musb_stop(struct musb *musb)
>  	musb_platform_try_idle(musb, 0);
>  }
>  
> -static void musb_shutdown(struct platform_device *pdev)
> -{
> -	struct musb	*musb = dev_to_musb(&pdev->dev);
> -	unsigned long	flags;
> -
> -	pm_runtime_get_sync(musb->controller);
> -
> -	musb_host_cleanup(musb);
> -	musb_gadget_cleanup(musb);
> -
> -	spin_lock_irqsave(&musb->lock, flags);
> -	musb_platform_disable(musb);
> -	musb_generic_disable(musb);
> -	spin_unlock_irqrestore(&musb->lock, flags);
> -
> -	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
> -	musb_platform_exit(musb);
> -
> -	pm_runtime_put(musb->controller);
> -	/* FIXME power down */
> -}
> -
> -
>  /*-------------------------------------------------------------------------*/
>  
>  /*
> @@ -2312,6 +2289,7 @@ static int musb_remove(struct platform_device *pdev)
>  {
>  	struct device	*dev = &pdev->dev;
>  	struct musb	*musb = dev_to_musb(dev);
> +	unsigned long	flags;
>  
>  	/* this gets called on rmmod.
>  	 *  - Host mode: host may still be active
> @@ -2319,7 +2297,19 @@ static int musb_remove(struct platform_device *pdev)
>  	 *  - OTG mode: both roles are deactivated (or never-activated)
>  	 */
>  	musb_exit_debugfs(musb);
> -	musb_shutdown(pdev);
> +
> +	pm_runtime_get_sync(musb->controller);
> +	musb_host_cleanup(musb);
> +	musb_gadget_cleanup(musb);
> +	spin_lock_irqsave(&musb->lock, flags);
> +	musb_platform_disable(musb);
> +	musb_generic_disable(musb);
> +	spin_unlock_irqrestore(&musb->lock, flags);
> +	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
> +	musb_platform_exit(musb);
> +	pm_runtime_put(musb->controller);
> +	/* FIXME power down */

Do we know what to be fixed? If not, I think we can drop this FIXME.

Regards,
-Bin.

> +
>  	musb_phy_callback = NULL;
>  
>  	if (musb->dma_controller)
> @@ -2612,7 +2602,6 @@ static struct platform_driver musb_driver = {
>  	},
>  	.probe		= musb_probe,
>  	.remove		= musb_remove,
> -	.shutdown	= musb_shutdown,
>  };
>  
>  module_platform_driver(musb_driver);
> -- 
> 2.8.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 04/10] usb: musb: Remove unnecessary shutdown function

[Tony Lindgren]

* Bin Liu <b-liu-l0cyMroinI0@public.gmane.org> [160505 12:22]:
> 
> Do we know what to be fixed? If not, I think we can drop this FIXME.

Yeah seems pointless.. I think the next patch drops it.

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 04/10] usb: musb: Remove unnecessary shutdown function

[Bin Liu]

On Thu, May 05, 2016 at 12:28:52PM -0700, Tony Lindgren wrote:
> * Bin Liu <b-liu-l0cyMroinI0@public.gmane.org> [160505 12:22]:
> > 
> > Do we know what to be fixed? If not, I think we can drop this FIXME.
> 
> Yeah seems pointless.. I think the next patch drops it.

Yeah, I just read patch 05/10.

> 
> Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 02/10] usb: musb: Fix idling after host mode by increasing autosuspend delay

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 386 bytes --]


Hi,

Bin Liu <b-liu-l0cyMroinI0@public.gmane.org> writes:
>> Does the current 200 ms autosuspend timeout relate to anything real
>> other than what I found out with my measurements?
>
> Not sure, I didn't checkk where the 200ms comes from.

It was an arbitrary number from when runtime PM was first added by
Hema. I don't think it has any esoteric meaning ;-)

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]

Re: [PATCH 02/10] usb: musb: Fix idling after host mode by increasing autosuspend delay

[Tony Lindgren]

* Felipe Balbi <balbi-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> [160505 23:49]:
> 
> Hi,
> 
> Bin Liu <b-liu-l0cyMroinI0@public.gmane.org> writes:
> >> Does the current 200 ms autosuspend timeout relate to anything real
> >> other than what I found out with my measurements?
> >
> > Not sure, I didn't checkk where the 200ms comes from.
> 
> It was an arbitrary number from when runtime PM was first added by
> Hema. I don't think it has any esoteric meaning ;-)

OK thanks for clarifying that. I'll add a comment for the 500 ms
value in the patch so we will remember why it is set.

Tony


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 00/10] Get MUSB PM runtime working again

[Tony Lindgren]

* Ivaylo Dimitrov <ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> [160503 10:46]:
> On  3.05.2016 19:25, Tony Lindgren wrote:
> >* Ivaylo Dimitrov <ivo.g.dimitrov.75-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> [160430 23:34]:
> >>
> >>Unfortunately that makes my n900 unbootable with USB cable detached, see the
> >>attached file (at [  152.121673]) when there is USB cable. I guess we're
> >>missing a couple of pm_runtime_get()/put() calls.
> >
> >OK so it seems. I did some brief testing with n900 too, but never
> >hit this so far. Care to email me the kernel .config you're using
> >so I can try to reproduce it here?
> >
> 
> .config is attached. There is stuff in it still to be upstreamed, just
> ignore it :). Or, you may pull
> https://github.com/freemangordon/linux-n900/commits/v4.6-rc4-n900-camera,
> apply the $subject series on top of it and build rx51_defconfig. There
> shouldn't be any patches touching USB.
> 
> Does bqXXX and isp1707_charger modules got loaded when you tested it? Or
> those were built-in? or not built at all? As it seems the problem arises
> when those try to touch USB ULPI.

OK managed to track this issue down. It's related to built-in musb
where a -EPROBE_DEFER causes musb to reinit. And then PM runtime got
confused about the musb glue layer parent use count. And then doing
a modprobe isp1704_charger caused a problem with the ulpi read/write.

Will repost the whole series after some more testing and clean-up.

Regards,

Tony

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html