* [PATCH v2] ARM: sun7i: dt: Add pll3 and pll7 clocks
@ 2016-05-05 17:39 ` Priit Laes
0 siblings, 0 replies; 6+ messages in thread
From: Priit Laes @ 2016-05-05 17:39 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Maxime Ripard, Chen-Yu Tsai
Cc: devicetree, linux-arm-kernel, linux-kernel, Priit Laes
Enable pll3 and pll7 clocks that are needed by display clocks.
Signed-off-by: Priit Laes <plaes@plaes.org>
---
v2:
- Fix typos in clocks property (spotted by Alexander Syring)
- Fix indentation (spotted by Maxime Ripard)
arch/arm/boot/dts/sun7i-a20.dtsi | 41 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index bf5d056..febdf4c 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -187,6 +187,15 @@
clock-output-names = "osc24M";
};
+ osc3M: osc3M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <8>;
+ clock-mult = <1>;
+ clocks = <&osc24M>;
+ clock-output-names = "osc3M";
+ };
+
osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -211,6 +220,22 @@
"pll2-4x", "pll2-8x";
};
+ pll3: clk@01c20010 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll3-clk";
+ reg = <0x01c20010 0x4>;
+ clocks = <&osc3M>;
+ clock-output-names = "pll3";
+ };
+
+ pll3x2: pll3x2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <2>;
+ clock-output-names = "pll3-2x";
+ };
+
pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk";
@@ -236,6 +261,22 @@
"pll6_div_4";
};
+ pll7: clk@01c20030 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll3-clk";
+ reg = <0x01c20030 0x4>;
+ clocks = <&osc3M>;
+ clock-output-names = "pll7";
+ };
+
+ pll7x2: pll7x2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <2>;
+ clock-output-names = "pll7-2x";
+ };
+
pll8: clk@01c20040 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk";
--
2.8.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2] ARM: sun7i: dt: Add pll3 and pll7 clocks
@ 2016-05-05 17:39 ` Priit Laes
0 siblings, 0 replies; 6+ messages in thread
From: Priit Laes @ 2016-05-05 17:39 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Maxime Ripard, Chen-Yu Tsai
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Priit Laes
Enable pll3 and pll7 clocks that are needed by display clocks.
Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
---
v2:
- Fix typos in clocks property (spotted by Alexander Syring)
- Fix indentation (spotted by Maxime Ripard)
arch/arm/boot/dts/sun7i-a20.dtsi | 41 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index bf5d056..febdf4c 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -187,6 +187,15 @@
clock-output-names = "osc24M";
};
+ osc3M: osc3M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <8>;
+ clock-mult = <1>;
+ clocks = <&osc24M>;
+ clock-output-names = "osc3M";
+ };
+
osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -211,6 +220,22 @@
"pll2-4x", "pll2-8x";
};
+ pll3: clk@01c20010 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll3-clk";
+ reg = <0x01c20010 0x4>;
+ clocks = <&osc3M>;
+ clock-output-names = "pll3";
+ };
+
+ pll3x2: pll3x2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <2>;
+ clock-output-names = "pll3-2x";
+ };
+
pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk";
@@ -236,6 +261,22 @@
"pll6_div_4";
};
+ pll7: clk@01c20030 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll3-clk";
+ reg = <0x01c20030 0x4>;
+ clocks = <&osc3M>;
+ clock-output-names = "pll7";
+ };
+
+ pll7x2: pll7x2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <2>;
+ clock-output-names = "pll7-2x";
+ };
+
pll8: clk@01c20040 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk";
--
2.8.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2] ARM: sun7i: dt: Add pll3 and pll7 clocks
@ 2016-05-05 17:39 ` Priit Laes
0 siblings, 0 replies; 6+ messages in thread
From: Priit Laes @ 2016-05-05 17:39 UTC (permalink / raw)
To: linux-arm-kernel
Enable pll3 and pll7 clocks that are needed by display clocks.
Signed-off-by: Priit Laes <plaes@plaes.org>
---
v2:
- Fix typos in clocks property (spotted by Alexander Syring)
- Fix indentation (spotted by Maxime Ripard)
arch/arm/boot/dts/sun7i-a20.dtsi | 41 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index bf5d056..febdf4c 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -187,6 +187,15 @@
clock-output-names = "osc24M";
};
+ osc3M: osc3M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <8>;
+ clock-mult = <1>;
+ clocks = <&osc24M>;
+ clock-output-names = "osc3M";
+ };
+
osc32k: clk at 0 {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -211,6 +220,22 @@
"pll2-4x", "pll2-8x";
};
+ pll3: clk at 01c20010 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll3-clk";
+ reg = <0x01c20010 0x4>;
+ clocks = <&osc3M>;
+ clock-output-names = "pll3";
+ };
+
+ pll3x2: pll3x2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <2>;
+ clock-output-names = "pll3-2x";
+ };
+
pll4: clk at 01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk";
@@ -236,6 +261,22 @@
"pll6_div_4";
};
+ pll7: clk at 01c20030 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll3-clk";
+ reg = <0x01c20030 0x4>;
+ clocks = <&osc3M>;
+ clock-output-names = "pll7";
+ };
+
+ pll7x2: pll7x2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <2>;
+ clock-output-names = "pll7-2x";
+ };
+
pll8: clk at 01c20040 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk";
--
2.8.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2] ARM: sun7i: dt: Add pll3 and pll7 clocks
@ 2016-05-08 19:09 ` Maxime Ripard
0 siblings, 0 replies; 6+ messages in thread
From: Maxime Ripard @ 2016-05-08 19:09 UTC (permalink / raw)
To: Priit Laes
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Chen-Yu Tsai, devicetree, linux-arm-kernel,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 320 bytes --]
On Thu, May 05, 2016 at 08:39:04PM +0300, Priit Laes wrote:
> Enable pll3 and pll7 clocks that are needed by display clocks.
>
> Signed-off-by: Priit Laes <plaes@plaes.org>
Applied, thanks
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] ARM: sun7i: dt: Add pll3 and pll7 clocks
@ 2016-05-08 19:09 ` Maxime Ripard
0 siblings, 0 replies; 6+ messages in thread
From: Maxime Ripard @ 2016-05-08 19:09 UTC (permalink / raw)
To: Priit Laes
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, Chen-Yu Tsai, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: Type: text/plain, Size: 350 bytes --]
On Thu, May 05, 2016 at 08:39:04PM +0300, Priit Laes wrote:
> Enable pll3 and pll7 clocks that are needed by display clocks.
>
> Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
Applied, thanks
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2] ARM: sun7i: dt: Add pll3 and pll7 clocks
@ 2016-05-08 19:09 ` Maxime Ripard
0 siblings, 0 replies; 6+ messages in thread
From: Maxime Ripard @ 2016-05-08 19:09 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, May 05, 2016 at 08:39:04PM +0300, Priit Laes wrote:
> Enable pll3 and pll7 clocks that are needed by display clocks.
>
> Signed-off-by: Priit Laes <plaes@plaes.org>
Applied, thanks
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160508/ea55844a/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-05-08 19:09 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-05 17:39 [PATCH v2] ARM: sun7i: dt: Add pll3 and pll7 clocks Priit Laes
2016-05-05 17:39 ` Priit Laes
2016-05-05 17:39 ` Priit Laes
2016-05-08 19:09 ` Maxime Ripard
2016-05-08 19:09 ` Maxime Ripard
2016-05-08 19:09 ` Maxime Ripard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.