* [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-06-27 13:20 kernel test robot
2016-06-27 18:59 ` Yinghai Lu
2016-07-01 7:50 ` Baoquan He
0 siblings, 2 replies; 27+ messages in thread
From: kernel test robot @ 2016-06-27 13:20 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 5247 bytes --]
FYI, we noticed the following commit:
https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/boot
commit ed9f007ee68478f6a50ec9971ade25a0129a5c0e ("x86/KASLR: Extend kernel image physical address randomization to addresses larger than 4G")
on test machine: 1 threads qemu-system-x86_64 -enable-kvm -cpu SandyBridge with 320M memory
caused below changes:
+-------------------------+------------+------------+
| | 8391c73c96 | ed9f007ee6 |
+-------------------------+------------+------------+
| boot_successes | 12 | 1 |
| boot_failures | 0 | 18 |
| System_halted | 0 | 16 |
| BUG:kernel_boot_hang | 0 | 16 |
| BUG:kernel_boot_crashed | 0 | 2 |
+-------------------------+------------+------------+
XZ-compressed data is corrupt
-- System halted
Elapsed time: 440
BUG: kernel boot hang
Linux version 4.7.0-rc3-00015-ged9f007 #1
Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-24/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-s0-06271005-ed9f007ee68478f6a50ec9971ade25a0129a5c0e-20160627-104046-1ydmxyc-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s0-06271005 branch=linux-devel/devel-spot-201606270954 commit=ed9f007ee68478f6a50ec9971ade25a0129a5c0e BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s0-06271005/gcc-6/ed9f007ee68478f6a50ec9971ade25a0129a5c0e/vmlinuz-4.7.0-rc3-00015-ged9f007 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-s0-06271005/gcc-6/ed9f007ee68478f6a50ec9971ade25a0129a5c0e/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-kbuild-yocto-x86_64-24::dhcp drbd.minor_count=8
qemu-system-x86_64 -enable-kvm -cpu SandyBridge -kernel /pkg/linux/x86_64-randconfig-s0-06271005/gcc-6/ed9f007ee68478f6a50ec9971ade25a0129a5c0e/vmlinuz-4.7.0-rc3-00015-ged9f007 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-24/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-s0-06271005-ed9f007ee68478f6a50ec9971ade25a0129a5c0e-20160627-104046-1ydmxyc-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s0-06271005 branch=linux-devel/devel-spot-201606270954 commit=ed9f007ee68478f6a50ec9971ade25a0129a5c0e BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s0-06271005/gcc-6/ed9f007ee68478f6a50ec9971ade25a0129a5c0e/vmlinuz-4.7.0-rc3-00015-ged9f007 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-s0-06271005/gcc-6/ed9f007ee68478f6a50ec9971ade25a0129a5c0e/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-kbuild-yocto-x86_64-24::dhcp drbd.minor_count=8' -initrd /fs/sdg1/initrd-vm-kbuild-yocto-x86_64-24 -m 320 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sdg1/disk0-vm-kbuild-yocto-x86_64-24,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-x86_64-24 -serial file:/dev/shm/kboot/serial-vm-kbuild-yocto-x86_64-24 -daemonize -display none -monitor null
FYI, raw QEMU command line is:
qemu-system-x86_64 -enable-kvm -cpu SandyBridge -kernel /pkg/linux/x86_64-randconfig-s0-06271005/gcc-6/ed9f007ee68478f6a50ec9971ade25a0129a5c0e/vmlinuz-4.7.0-rc3-00015-ged9f007 -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-24/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-randconfig-s0-06271005-ed9f007ee68478f6a50ec9971ade25a0129a5c0e-20160627-104046-1ydmxyc-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s0-06271005 branch=linux-devel/devel-spot-201606270954 commit=ed9f007ee68478f6a50ec9971ade25a0129a5c0e BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s0-06271005/gcc-6/ed9f007ee68478f6a50ec9971ade25a0129a5c0e/vmlinuz-4.7.0-rc3-00015-ged9f007 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-s0-06271005/gcc-6/ed9f007ee68478f6a50ec9971ade25a0129a5c0e/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-kbuild-yocto-x86_64-24::dhcp drbd.minor_count=8' -initrd /fs/sdg1/initrd-vm-kbuild-yocto-x86_64-24 -m 320 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sdg1/disk0-vm-kbuild-yocto-x86_64-24,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-x86_64-24 -serial file:/dev/shm/kboot/serial-vm-kbuild-yocto-x86_64-24 -daemonize -display none -monitor null
Thanks,
Kernel Test Robot
[-- Attachment #2: config-4.7.0-rc3-00015-ged9f007 --]
[-- Type: text/plain, Size: 114997 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.7.0-rc3 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not set
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_DEBUG=y
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
CONFIG_RD_LZO=y
# CONFIG_RD_LZ4 is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
# CONFIG_SHMEM is not set
CONFIG_AIO=y
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
# CONFIG_GCOV_FORMAT_AUTODETECT is not set
CONFIG_GCOV_FORMAT_3_4=y
# CONFIG_GCOV_FORMAT_4_7 is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_AMD is not set
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_DMI is not set
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=1
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_UP_LATE_INIT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_INTEL_UNCORE is not set
# CONFIG_PERF_EVENTS_INTEL_RAPL is not set
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
# CONFIG_VM86 is not set
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
# CONFIG_CMA is not set
CONFIG_ZPOOL=y
# CONFIG_ZBUD is not set
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_ARCH_RANDOM is not set
CONFIG_X86_SMAP=y
CONFIG_X86_INTEL_MPX=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_VERIFY_SIG=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
# CONFIG_PM_WAKELOCKS_GC is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI host controller drivers
#
# CONFIG_PCIE_DW_PLAT is not set
CONFIG_ISA_DMA_API=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_COREDUMP is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_X86_X32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
CONFIG_IPV6_ILA=y
# CONFIG_INET6_XFRM_TUNNEL is not set
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
# CONFIG_IPV6_PIMSM_V2 is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_INGRESS is not set
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK is not set
CONFIG_NF_LOG_COMMON=y
CONFIG_NF_TABLES=y
# CONFIG_NF_TABLES_INET is not set
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_EXTHDR=y
# CONFIG_NFT_META is not set
# CONFIG_NFT_RBTREE is not set
CONFIG_NFT_HASH=y
# CONFIG_NFT_COUNTER is not set
CONFIG_NFT_LOG=y
# CONFIG_NFT_LIMIT is not set
CONFIG_NFT_REJECT=y
# CONFIG_NFT_COMPAT is not set
CONFIG_NF_DUP_NETDEV=y
# CONFIG_NFT_DUP_NETDEV is not set
# CONFIG_NFT_FWD_NETDEV is not set
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
# CONFIG_IP_SET_HASH_IPPORTNET is not set
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=y
CONFIG_IP_SET_HASH_NET=y
# CONFIG_IP_SET_HASH_NETNET is not set
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_AH_ESP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
# CONFIG_IP_VS_WRR is not set
CONFIG_IP_VS_LC=y
# CONFIG_IP_VS_WLC is not set
# CONFIG_IP_VS_FO is not set
CONFIG_IP_VS_OVF=y
# CONFIG_IP_VS_LBLC is not set
# CONFIG_IP_VS_LBLCR is not set
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_NF_TABLES_IPV4=y
# CONFIG_NFT_CHAIN_ROUTE_IPV4 is not set
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NFT_DUP_IPV4=y
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_RAW=y
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_CHAIN_ROUTE_IPV6=y
CONFIG_NFT_REJECT_IPV6=y
CONFIG_NFT_DUP_IPV6=y
CONFIG_NF_DUP_IPV6=y
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
# CONFIG_IP6_NF_FILTER is not set
# CONFIG_IP6_NF_MANGLE is not set
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
# CONFIG_SCTP_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=y
# CONFIG_RDS is not set
CONFIG_TIPC=y
# CONFIG_TIPC_MEDIA_UDP is not set
# CONFIG_ATM is not set
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
# CONFIG_L2TP_V3 is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
# CONFIG_IPDDP_ENCAP is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_6LOWPAN=y
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_NHC=y
CONFIG_6LOWPAN_NHC_DEST=y
# CONFIG_6LOWPAN_NHC_FRAGMENT is not set
CONFIG_6LOWPAN_NHC_HOP=y
# CONFIG_6LOWPAN_NHC_IPV6 is not set
CONFIG_6LOWPAN_NHC_MOBILITY=y
# CONFIG_6LOWPAN_NHC_ROUTING is not set
CONFIG_6LOWPAN_NHC_UDP=y
# CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set
# CONFIG_6LOWPAN_GHC_UDP is not set
CONFIG_6LOWPAN_GHC_ICMPV6=y
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=y
# CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BATMAN_V is not set
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=y
# CONFIG_OPENVSWITCH_GRE is not set
# CONFIG_OPENVSWITCH_GENEVE is not set
CONFIG_VSOCKETS=y
# CONFIG_VMWARE_VMCI_VSOCKETS is not set
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
# CONFIG_MPLS_ROUTING is not set
CONFIG_HSR=y
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
CONFIG_CAN_SLCAN=y
# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=y
CONFIG_ACTISYS_DONGLE=y
# CONFIG_TEKRAM_DONGLE is not set
# CONFIG_TOIM3232_DONGLE is not set
CONFIG_LITELINK_DONGLE=y
CONFIG_MA600_DONGLE=y
# CONFIG_GIRBIL_DONGLE is not set
# CONFIG_MCP2120_DONGLE is not set
# CONFIG_OLD_BELKIN_DONGLE is not set
# CONFIG_ACT200L_DONGLE is not set
CONFIG_KINGSUN_DONGLE=y
CONFIG_KSDAZZLE_DONGLE=y
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_SIGMATEL_FIR=y
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
CONFIG_SMC_IRCC_FIR=y
CONFIG_ALI_FIR=y
CONFIG_VLSI_FIR=y
CONFIG_VIA_FIR=y
# CONFIG_MCS_FIR is not set
CONFIG_BT=y
# CONFIG_BT_BREDR is not set
CONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_SELFTEST is not set
# CONFIG_BT_DEBUGFS is not set
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=y
CONFIG_BT_BCM=y
CONFIG_BT_RTL=y
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_RTL=y
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIUART_3WIRE is not set
# CONFIG_BT_HCIUART_INTEL is not set
CONFIG_BT_HCIUART_BCM=y
# CONFIG_BT_HCIUART_QCA is not set
# CONFIG_BT_HCIUART_AG6XX is not set
# CONFIG_BT_HCIBCM203X is not set
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
# CONFIG_BT_MRVL_SDIO is not set
# CONFIG_BT_ATH3K is not set
CONFIG_BT_WILINK=y
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
# CONFIG_CAIF_NETDEV is not set
CONFIG_CAIF_USB=y
# CONFIG_CEPH_LIB is not set
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=y
# CONFIG_NFC_NCI_SPI is not set
CONFIG_NFC_NCI_UART=y
# CONFIG_NFC_HCI is not set
#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_WILINK is not set
CONFIG_NFC_SIM=y
CONFIG_NFC_FDP=y
CONFIG_NFC_FDP_I2C=y
CONFIG_NFC_PN533=y
# CONFIG_NFC_PN533_USB is not set
CONFIG_NFC_PN533_I2C=y
CONFIG_NFC_MRVL=y
CONFIG_NFC_MRVL_USB=y
CONFIG_NFC_MRVL_UART=y
CONFIG_NFC_MRVL_I2C=y
CONFIG_NFC_ST_NCI=y
CONFIG_NFC_ST_NCI_I2C=y
# CONFIG_NFC_ST_NCI_SPI is not set
# CONFIG_NFC_NXP_NCI is not set
# CONFIG_NFC_S3FWRN5_I2C is not set
CONFIG_LWTUNNEL=y
CONFIG_DST_CACHE=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PHYSMAP_OF is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SST25L=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
CONFIG_MTD_SM_COMMON=y
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
# CONFIG_MTD_NAND_DENALI_DT is not set
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
CONFIG_MTD_NAND_GPIO=y
# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_RICOH=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_DOCG4=y
CONFIG_MTD_NAND_CAFE=y
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
# CONFIG_MTD_NAND_HISI504 is not set
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_MT81xx_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
# CONFIG_OF_DYNAMIC is not set
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_MTD=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=y
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1780 is not set
CONFIG_SENSORS_BH1770=y
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=y
CONFIG_VMWARE_BALLOON=y
CONFIG_BMP085=y
CONFIG_BMP085_I2C=y
# CONFIG_BMP085_SPI is not set
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=y
#
# Intel MIC Bus Driver
#
CONFIG_INTEL_MIC_BUS=y
#
# SCIF Bus Driver
#
CONFIG_SCIF_BUS=y
#
# VOP Bus Driver
#
CONFIG_VOP_BUS=y
#
# Intel MIC Host Driver
#
CONFIG_INTEL_MIC_HOST=y
#
# Intel MIC Card Driver
#
CONFIG_INTEL_MIC_CARD=y
#
# SCIF Driver
#
CONFIG_SCIF=y
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
CONFIG_MIC_COSM=y
#
# VOP Driver
#
CONFIG_VOP=y
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_KERNEL_API is not set
# CONFIG_CXL_EEH is not set
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_NET=y
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_BROADCAST=y
CONFIG_NET_TEAM_MODE_ROUNDROBIN=y
# CONFIG_NET_TEAM_MODE_RANDOM is not set
# CONFIG_NET_TEAM_MODE_ACTIVEBACKUP is not set
CONFIG_NET_TEAM_MODE_LOADBALANCE=y
# CONFIG_MACVLAN is not set
CONFIG_IPVLAN=y
# CONFIG_VXLAN is not set
CONFIG_GENEVE=y
CONFIG_GTP=y
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_NTB_NETDEV=y
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
CONFIG_SUNGEM_PHY=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
# CONFIG_ARCNET_1051 is not set
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
# CONFIG_ARCNET_COM90xxIO is not set
CONFIG_ARCNET_RIM_I=y
# CONFIG_ARCNET_COM20020 is not set
#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=y
CONFIG_CAIF_SPI_SLAVE=y
# CONFIG_CAIF_SPI_SYNC is not set
# CONFIG_CAIF_HSI is not set
CONFIG_CAIF_VIRTIO=y
# CONFIG_VHOST_NET is not set
CONFIG_VHOST_RING=y
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
CONFIG_TYPHOON=y
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=y
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_ALTERA_TSE=y
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
# CONFIG_CHELSIO_T3 is not set
CONFIG_CHELSIO_T4=y
# CONFIG_CHELSIO_T4_UWIRE is not set
CONFIG_CHELSIO_T4VF=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=y
CONFIG_CX_ECAT=y
CONFIG_DNET=y
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=y
CONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
# CONFIG_I40E is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_JME=y
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MYRI is not set
CONFIG_FEALNX=y
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=y
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=y
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=y
CONFIG_QLCNIC=y
# CONFIG_QLCNIC_SRIOV is not set
# CONFIG_QLGE is not set
CONFIG_NETXEN_NIC=y
CONFIG_QED=y
CONFIG_QED_SRIOV=y
CONFIG_QEDE=y
CONFIG_QEDE_GENEVE=y
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000=y
# CONFIG_NET_VENDOR_REALTEK is not set
CONFIG_NET_VENDOR_RENESAS=y
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=y
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=y
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
CONFIG_TI_CPSW_ALE=y
CONFIG_TLAN=y
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
CONFIG_VIA_VELOCITY=y
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_AQUANTIA_PHY=y
CONFIG_AT803X_PHY=y
# CONFIG_AMD_PHY is not set
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
CONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not set
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
# CONFIG_TERANETICS_PHY is not set
CONFIG_SMSC_PHY=y
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BROADCOM_PHY=y
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=y
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MICREL_PHY=y
# CONFIG_DP83848_PHY is not set
CONFIG_DP83867_PHY=y
CONFIG_MICROCHIP_PHY=y
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not set
CONFIG_MDIO_CAVIUM=y
CONFIG_MDIO_OCTEON=y
CONFIG_MDIO_THUNDER=y
CONFIG_MDIO_BUS_MUX=y
# CONFIG_MDIO_BUS_MUX_GPIO is not set
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_MDIO_BCM_UNIMAC=y
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PLIP=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=y
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=y
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_MAC80211_HWSIM=y
# CONFIG_USB_NET_RNDIS_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
CONFIG_LANMEDIA=y
CONFIG_HDLC=y
# CONFIG_HDLC_RAW is not set
CONFIG_HDLC_RAW_ETH=y
# CONFIG_HDLC_CISCO is not set
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PCI200SYN=y
CONFIG_WANXL=y
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
# CONFIG_DLCI is not set
# CONFIG_LAPBETHER is not set
CONFIG_X25_ASY=y
CONFIG_SBNI=y
CONFIG_SBNI_MULTILINE=y
CONFIG_VMXNET3=y
# CONFIG_FUJITSU_ES is not set
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
CONFIG_ISDN_PPP=y
# CONFIG_ISDN_PPP_VJ is not set
# CONFIG_ISDN_MPP is not set
# CONFIG_IPPP_FILTER is not set
CONFIG_ISDN_PPP_BSDCOMP=y
# CONFIG_ISDN_AUDIO is not set
# CONFIG_ISDN_X25 is not set
#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=y
# CONFIG_ISDN_DIVERSION is not set
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=y
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
# CONFIG_HISAX_1TR6 is not set
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
# CONFIG_HISAX_TELESPCI is not set
CONFIG_HISAX_S0BOX=y
# CONFIG_HISAX_FRITZPCI is not set
CONFIG_HISAX_AVM_A1_PCMCIA=y
# CONFIG_HISAX_ELSA is not set
# CONFIG_HISAX_DIEHLDIVA is not set
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
# CONFIG_HISAX_GAZEL is not set
# CONFIG_HISAX_HFC_PCI is not set
# CONFIG_HISAX_W6692 is not set
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=y
CONFIG_HISAX_HFCUSB=y
CONFIG_HISAX_HFC4S8S=y
CONFIG_HISAX_FRITZ_PCIPNP=y
CONFIG_ISDN_CAPI=y
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=y
CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE=y
#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
# CONFIG_CAPI_EICON is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=y
# CONFIG_GIGASET_M105 is not set
CONFIG_GIGASET_M101=y
CONFIG_GIGASET_DEBUG=y
# CONFIG_MISDN is not set
CONFIG_ISDN_HDLC=y
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_LEDS is not set
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_BCM5974=y
# CONFIG_MOUSE_CYAPA is not set
CONFIG_MOUSE_ELAN_I2C=y
# CONFIG_MOUSE_ELAN_I2C_I2C is not set
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
# CONFIG_JOYSTICK_GAMECON is not set
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
# CONFIG_JOYSTICK_XPAD_LEDS is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_GTCO is not set
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
CONFIG_TOUCHSCREEN_AD7879=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
CONFIG_TOUCHSCREEN_AD7879_SPI=y
CONFIG_TOUCHSCREEN_AR1021_I2C=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=y
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DA9052 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=y
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
# CONFIG_TOUCHSCREEN_FT6236 is not set
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GOODIX=y
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
CONFIG_TOUCHSCREEN_UCB1400=y
CONFIG_TOUCHSCREEN_PIXCIR=y
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
CONFIG_TOUCHSCREEN_WM831X=y
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_ST1232 is not set
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SX8654=y
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_TOUCHSCREEN_ZFORCE=y
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_SYNCLINK=y
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
CONFIG_NOZOMI=y
CONFIG_ISI=y
# CONFIG_N_HDLC is not set
CONFIG_N_GSM=y
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
# CONFIG_DEVMEM is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=y
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_UARTLITE=y
# CONFIG_SERIAL_UARTLITE_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_SCCNXP=y
# CONFIG_SERIAL_SCCNXP_CONSOLE is not set
# CONFIG_SERIAL_SC16IS7XX is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
CONFIG_TTY_PRINTK=y
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_HW_RANDOM_TPM=y
# CONFIG_NVRAM is not set
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_MWAVE=y
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_NSC=y
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_CRB is not set
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
CONFIG_TCG_TIS_ST33ZP24_SPI=y
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_PCA9541=y
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_REG=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=y
CONFIG_I2C_ISMT=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_EMEV2=y
CONFIG_I2C_GPIO=y
# CONFIG_I2C_KEMPLD is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_RK3X=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_DLN2=y
CONFIG_I2C_PARPORT=y
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
# CONFIG_I2C_VIPERBOARD is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_DLN2 is not set
CONFIG_SPI_GPIO=y
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_FSL_LIB=y
CONFIG_SPI_FSL_SPI=y
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_ROCKCHIP=y
# CONFIG_SPI_SC18IS602 is not set
CONFIG_SPI_XCOMM=y
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LYNXPOINT=y
CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_VX855=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_ZX=y
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_IT87=y
CONFIG_GPIO_SCH=y
CONFIG_GPIO_SCH311X=y
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
CONFIG_GPIO_ADNP=y
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_TPIC2810=y
#
# MFD GPIO expanders
#
# CONFIG_GPIO_ARIZONA is not set
# CONFIG_GPIO_CRYSTAL_COVE is not set
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
# CONFIG_GPIO_DLN2 is not set
# CONFIG_GPIO_KEMPLD is not set
# CONFIG_GPIO_LP3943 is not set
CONFIG_GPIO_RC5T583=y
# CONFIG_GPIO_STMPE is not set
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TPS65218=y
# CONFIG_GPIO_TPS65910 is not set
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_UCB1400 is not set
CONFIG_GPIO_WM831X=y
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_INTEL_MID is not set
CONFIG_GPIO_ML_IOH=y
# CONFIG_GPIO_RDC321X is not set
CONFIG_GPIO_SODAVILLE=y
#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
# CONFIG_GPIO_PISOSR is not set
#
# SPI or I2C GPIO expanders
#
CONFIG_GPIO_MCP23S08=y
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
CONFIG_W1=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
# CONFIG_WM831X_BACKUP is not set
CONFIG_WM831X_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
# CONFIG_BATTERY_DA9052 is not set
CONFIG_BATTERY_DA9150=y
CONFIG_AXP288_CHARGER=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_MAX77693 is not set
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ25890=y
# CONFIG_CHARGER_SMB347 is not set
CONFIG_CHARGER_TPS65090=y
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_RT5033=y
CONFIG_CHARGER_RT9455=y
# CONFIG_AXP20X_POWER is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_SYSFS=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_DA9052_WATCHDOG=y
# CONFIG_DA9055_WATCHDOG is not set
CONFIG_GPIO_WATCHDOG=y
# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
CONFIG_MENF21BMC_WATCHDOG=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=y
# CONFIG_ZIIRAVE_WATCHDOG is not set
CONFIG_CADENCE_WATCHDOG=y
# CONFIG_DW_WATCHDOG is not set
# CONFIG_TWL4030_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
CONFIG_ALIM1535_WDT=y
# CONFIG_ALIM7101_WDT is not set
CONFIG_F71808E_WDT=y
CONFIG_SP5100_TCO=y
CONFIG_SBC_FITPC2_WATCHDOG=y
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=y
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
# CONFIG_IE6XX_WDT is not set
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=y
CONFIG_IT87_WDT=y
# CONFIG_HP_WATCHDOG is not set
CONFIG_KEMPLD_WDT=y
CONFIG_SC1200_WDT=y
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=y
CONFIG_60XX_WDT=y
CONFIG_CPU5_WDT=y
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_VIA_WDT=y
CONFIG_W83627HF_WDT=y
CONFIG_W83877F_WDT=y
# CONFIG_W83977F_WDT is not set
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y
# CONFIG_INTEL_MEI_WDT is not set
# CONFIG_NI903X_WDT is not set
CONFIG_MEN_A21_WDT=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
CONFIG_MFD_CROS_EC_SPI=y
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_MC13XXX=y
# CONFIG_MFD_MC13XXX_SPI is not set
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_MFD_HI6421_PMIC=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
CONFIG_MFD_INTEL_LPSS=y
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=y
# CONFIG_MFD_RETU is not set
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_UCB1400_CORE=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RTSX_PCI=y
CONFIG_MFD_RT5033=y
CONFIG_MFD_RTSX_USB=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
# CONFIG_MFD_RN5T618 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
CONFIG_MFD_SMSC=y
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_CS47L24 is not set
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_ACT8865=y
# CONFIG_REGULATOR_ACT8945A is not set
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA=y
CONFIG_REGULATOR_AXP20X=y
# CONFIG_REGULATOR_BCM590XX is not set
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_DA9055=y
# CONFIG_REGULATOR_DA9210 is not set
CONFIG_REGULATOR_DA9211=y
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LP3971=y
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
CONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_LP8788 is not set
CONFIG_REGULATOR_LTC3589=y
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8907 is not set
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MAX8997 is not set
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
# CONFIG_REGULATOR_MAX77802 is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_PFUZE100 is not set
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RC5T583=y
# CONFIG_REGULATOR_RK808 is not set
# CONFIG_REGULATOR_RT5033 is not set
# CONFIG_REGULATOR_S2MPA01 is not set
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS51632=y
# CONFIG_REGULATOR_TPS6105X is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS65086 is not set
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65218=y
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TPS65910=y
# CONFIG_REGULATOR_TWL4030 is not set
CONFIG_REGULATOR_WM831X=y
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_PCI_SKELETON=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
CONFIG_VIDEOBUF2_DVB=y
CONFIG_DVB_CORE=y
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=y
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
CONFIG_VIDEO_SOLO6X10=y
CONFIG_VIDEO_TW68=y
CONFIG_VIDEO_TW686X=y
# CONFIG_VIDEO_ZORAN is not set
#
# Media capture/analog TV support
#
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_HEXIUM_ORION=y
CONFIG_VIDEO_MXB=y
CONFIG_VIDEO_DT3155=y
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX25821=y
CONFIG_VIDEO_CX25821_ALSA=y
CONFIG_VIDEO_SAA7134=y
# CONFIG_VIDEO_SAA7134_ALSA is not set
# CONFIG_VIDEO_SAA7134_DVB is not set
CONFIG_VIDEO_SAA7164=y
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=y
CONFIG_DVB_AV7110_OSD=y
# CONFIG_DVB_BUDGET_CORE is not set
CONFIG_DVB_B2C2_FLEXCOP_PCI=y
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
# CONFIG_DVB_PLUTO2 is not set
# CONFIG_DVB_PT1 is not set
# CONFIG_DVB_PT3 is not set
CONFIG_DVB_NGENE=y
CONFIG_DVB_DDBRIDGE=y
CONFIG_DVB_NETUP_UNIDVB=y
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_VIDEO_VIA_CAMERA is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
# CONFIG_SMS_SDIO_DRV is not set
# CONFIG_RADIO_ADAPTERS is not set
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=y
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_CYPRESS_FIRMWARE=y
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TEA6415C=y
CONFIG_VIDEO_TEA6420=y
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
#
# Video decoders
#
CONFIG_VIDEO_SAA711X=y
#
# Video and audio decoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
#
# Miscellaneous helper chips
#
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV6110x=y
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_TDA18271C2DD=y
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24123=y
CONFIG_DVB_MT312=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_TDA8083=y
CONFIG_DVB_VES1X93=y
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_CX24120=y
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=y
CONFIG_DVB_L64781=y
CONFIG_DVB_MT352=y
CONFIG_DVB_TDA10048=y
CONFIG_DVB_CXD2841ER=y
# CONFIG_DVB_AS102_FE is not set
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
CONFIG_DVB_STV0297=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_S5H1411=y
#
# ISDB-T (terrestrial) frontends
#
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBH25=y
CONFIG_DVB_LNBP21=y
CONFIG_DVB_ISL6421=y
CONFIG_DVB_HORUS3A=y
CONFIG_DVB_ASCOT2E=y
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
#
# ACP (Audio CoProcessor) Configuration
#
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not set
# CONFIG_FB_BIG_ENDIAN is not set
CONFIG_FB_LITTLE_ENDIAN=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=y
CONFIG_FB_CYBER2000_DDC=y
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_OPENCORES=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=y
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
# CONFIG_FB_3DFX_I2C is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=y
# CONFIG_FB_CARMINE_DRAM_EVAL is not set
CONFIG_CARMINE_DRAM_CUSTOM=y
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_BROADSHEET=y
CONFIG_FB_AUO_K190X=y
CONFIG_FB_AUO_K1900=y
# CONFIG_FB_AUO_K1901 is not set
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
# CONFIG_LCD_TDO24M is not set
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_S6E63M0=y
CONFIG_LCD_LD9040=y
CONFIG_LCD_AMS369FG06=y
CONFIG_LCD_LMS501KF03=y
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_LM3533=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_DA9052=y
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_PM8941_WLED=y
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_PCF50633=y
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
# CONFIG_BACKLIGHT_LP855X is not set
CONFIG_BACKLIGHT_LP8788=y
CONFIG_BACKLIGHT_PANDORA=y
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_VGASTATE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_ALOOP=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
# CONFIG_SND_PCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_SPI=y
# CONFIG_SND_USB is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=y
CONFIG_SND_DICE=y
CONFIG_SND_OXFW=y
CONFIG_SND_ISIGHT=y
CONFIG_SND_FIREWORKS=y
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
CONFIG_SND_FIREWIRE_TASCAM=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
# CONFIG_SND_SOC_AMD_ACP is not set
# CONFIG_SND_ATMEL_SOC is not set
CONFIG_SND_DESIGNWARE_I2S=y
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=y
CONFIG_SND_SOC_FSL_SAI=y
CONFIG_SND_SOC_FSL_SSI=y
# CONFIG_SND_SOC_FSL_SPDIF is not set
CONFIG_SND_SOC_FSL_ESAI=y
CONFIG_SND_SOC_IMX_AUDMUX=y
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SST_MFLD_PLATFORM=y
CONFIG_SND_SST_IPC=y
CONFIG_SND_SST_IPC_ACPI=y
CONFIG_SND_SOC_INTEL_SST=y
CONFIG_SND_SOC_INTEL_SST_ACPI=y
CONFIG_SND_SOC_INTEL_SST_MATCH=y
# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=y
# CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH is not set
# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
#
# Allwinner SoC Audio support
#
CONFIG_SND_SUN4I_CODEC=y
CONFIG_SND_SUN4I_SPDIF=y
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=y
# CONFIG_SND_SOC_ADAU1701 is not set
CONFIG_SND_SOC_AK4104=y
CONFIG_SND_SOC_AK4554=y
CONFIG_SND_SOC_AK4613=y
CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_ALC5623=y
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
CONFIG_SND_SOC_CS42L73=y
CONFIG_SND_SOC_CS4265=y
# CONFIG_SND_SOC_CS4270 is not set
CONFIG_SND_SOC_CS4271=y
CONFIG_SND_SOC_CS4271_I2C=y
# CONFIG_SND_SOC_CS4271_SPI is not set
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS4349=y
# CONFIG_SND_SOC_ES8328 is not set
CONFIG_SND_SOC_GTM601=y
# CONFIG_SND_SOC_INNO_RK3036 is not set
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
CONFIG_SND_SOC_PCM179X_SPI=y
CONFIG_SND_SOC_PCM3168A=y
CONFIG_SND_SOC_PCM3168A_I2C=y
CONFIG_SND_SOC_PCM3168A_SPI=y
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5640=y
# CONFIG_SND_SOC_RT5677_SPI is not set
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=y
CONFIG_SND_SOC_SPDIF=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_SPI=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
CONFIG_SND_SOC_STA32X=y
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_STI_SAS is not set
CONFIG_SND_SOC_TAS2552=y
CONFIG_SND_SOC_TAS5086=y
CONFIG_SND_SOC_TAS571X=y
# CONFIG_SND_SOC_TAS5720 is not set
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
CONFIG_SND_SOC_TLV320AIC31XX=y
CONFIG_SND_SOC_TLV320AIC3X=y
# CONFIG_SND_SOC_TS3A227E is not set
# CONFIG_SND_SOC_WM8510 is not set
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8580=y
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
# CONFIG_SND_SOC_WM8737 is not set
CONFIG_SND_SOC_WM8741=y
# CONFIG_SND_SOC_WM8750 is not set
CONFIG_SND_SOC_WM8753=y
# CONFIG_SND_SOC_WM8770 is not set
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
# CONFIG_SND_SOC_WM8804_SPI is not set
CONFIG_SND_SOC_WM8903=y
# CONFIG_SND_SOC_WM8960 is not set
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8974 is not set
CONFIG_SND_SOC_WM8978=y
# CONFIG_SND_SOC_TPA6130A2 is not set
# CONFIG_SND_SIMPLE_CARD is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
CONFIG_UHID=y
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
CONFIG_HID_ASUS=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CORSAIR=y
CONFIG_HID_PRODIKEYS=y
CONFIG_HID_CMEDIA=y
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=y
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
CONFIG_HID_GFRM=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LENOVO=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_HIDPP=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LCD is not set
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_SAITEK=y
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=y
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
# CONFIG_USB_HID is not set
# CONFIG_HID_PID is not set
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=y
CONFIG_USB_MOUSE=y
#
# I2C HID support
#
CONFIG_I2C_HID=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_ULPI_BUS=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1362_HCD=y
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_MAX3421_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_TEST_MODE=y
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USBIP_CORE=y
CONFIG_USBIP_VHCI_HCD=y
# CONFIG_USBIP_HOST is not set
CONFIG_USBIP_DEBUG=y
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PCI is not set
CONFIG_USB_DWC2_DEBUG=y
CONFIG_USB_DWC2_VERBOSE=y
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
# CONFIG_USB_DWC2_DEBUG_PERIODIC is not set
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760_HOST_ROLE=y
#
# USB port drivers
#
CONFIG_USB_USS720=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
CONFIG_USB_SERIAL_IR=y
# CONFIG_USB_SERIAL_EDGEPORT is not set
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_F81232=y
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
CONFIG_USB_SERIAL_QUALCOMM=y
CONFIG_USB_SERIAL_SPCP8X5=y
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_SYMBOL=y
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_XSENS_MT=y
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=y
CONFIG_USB_SERIAL_QT2=y
CONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
CONFIG_USB_LED=y
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HSIC_USB3503=y
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=y
# CONFIG_UCSI is not set
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_USB_ISP1301=y
# CONFIG_USB_GADGET is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_PWRSEQ_EMMC is not set
# CONFIG_PWRSEQ_SIMPLE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_WBSD=y
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SPI=y
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=y
# CONFIG_MMC_REALTEK_USB is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
CONFIG_MMC_MTK=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
#
# LED drivers
#
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3533=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_LP8788=y
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_TLC591XX=y
# CONFIG_LEDS_MAX77693 is not set
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_MENF21BMC=y
# CONFIG_LEDS_KTD2692 is not set
CONFIG_LEDS_IS31FL32XX=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_SYSCON=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_ABB5ZES3=y
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_LP8788 is not set
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8997=y
# CONFIG_RTC_DRV_MAX77686 is not set
# CONFIG_RTC_DRV_RK808 is not set
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12057 is not set
# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=y
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_TPS65910 is not set
CONFIG_RTC_DRV_RC5T583=y
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=y
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
CONFIG_RTC_DRV_RX8025=y
# CONFIG_RTC_DRV_EM3027 is not set
CONFIG_RTC_DRV_RV8803=y
# CONFIG_RTC_DRV_S5M is not set
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1302=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1343=y
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RX4581=y
CONFIG_RTC_DRV_RX6110=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_MAX6902=y
# CONFIG_RTC_DRV_PCF2123 is not set
CONFIG_RTC_DRV_MCP795=y
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1685_FAMILY=y
# CONFIG_RTC_DRV_DS1685 is not set
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
CONFIG_RTC_DRV_DS17885=y
# CONFIG_RTC_DS1685_PROC_REGS is not set
# CONFIG_RTC_DS1685_SYSFS_REGS is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=y
# CONFIG_RTC_DRV_DA9052 is not set
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_WM831X=y
# CONFIG_RTC_DRV_PCF50633 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_MC13XXX is not set
CONFIG_RTC_DRV_SNVS=y
# CONFIG_RTC_DRV_MT6397 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=y
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=y
# CONFIG_UIO_PRUSS is not set
CONFIG_UIO_MF624=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
# CONFIG_VIRTIO_PCI_LEGACY is not set
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_R8712U is not set
# CONFIG_R8188EU is not set
# CONFIG_R8723AU is not set
CONFIG_FB_SM750=y
# CONFIG_FB_XGI is not set
#
# Speakup console speech
#
CONFIG_STAGING_MEDIA=y
CONFIG_DVB_CXD2099=y
# CONFIG_DVB_MN88472 is not set
#
# Android
#
# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
# CONFIG_SYNC is not set
# CONFIG_ION is not set
# CONFIG_STAGING_BOARD is not set
CONFIG_FIREWIRE_SERIAL=y
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
CONFIG_MTD_SPINAND_MT29F=y
# CONFIG_MTD_SPINAND_ONDIEECC is not set
# CONFIG_DGNC is not set
CONFIG_GS_FPGABOOT=y
CONFIG_CRYPTO_SKEIN=y
# CONFIG_UNISYSSPAR is not set
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
CONFIG_FB_TFT=y
CONFIG_FB_TFT_AGM1264K_FL=y
CONFIG_FB_TFT_BD663474=y
CONFIG_FB_TFT_HX8340BN=y
CONFIG_FB_TFT_HX8347D=y
CONFIG_FB_TFT_HX8353D=y
CONFIG_FB_TFT_HX8357D=y
# CONFIG_FB_TFT_ILI9163 is not set
CONFIG_FB_TFT_ILI9320=y
CONFIG_FB_TFT_ILI9325=y
CONFIG_FB_TFT_ILI9340=y
CONFIG_FB_TFT_ILI9341=y
CONFIG_FB_TFT_ILI9481=y
CONFIG_FB_TFT_ILI9486=y
# CONFIG_FB_TFT_PCD8544 is not set
# CONFIG_FB_TFT_RA8875 is not set
# CONFIG_FB_TFT_S6D02A1 is not set
# CONFIG_FB_TFT_S6D1121 is not set
# CONFIG_FB_TFT_SSD1289 is not set
CONFIG_FB_TFT_SSD1305=y
CONFIG_FB_TFT_SSD1306=y
# CONFIG_FB_TFT_SSD1325 is not set
# CONFIG_FB_TFT_SSD1331 is not set
# CONFIG_FB_TFT_SSD1351 is not set
# CONFIG_FB_TFT_ST7735R is not set
CONFIG_FB_TFT_ST7789V=y
# CONFIG_FB_TFT_TINYLCD is not set
# CONFIG_FB_TFT_TLS8204 is not set
CONFIG_FB_TFT_UC1611=y
# CONFIG_FB_TFT_UC1701 is not set
CONFIG_FB_TFT_UPD161704=y
# CONFIG_FB_TFT_WATTEROTT is not set
CONFIG_FB_FLEX=y
CONFIG_FB_TFT_FBTFT_DEVICE=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
CONFIG_MOST=y
CONFIG_MOSTCORE=y
CONFIG_AIM_CDEV=y
CONFIG_AIM_NETWORK=y
# CONFIG_AIM_SOUND is not set
CONFIG_AIM_V4L2=y
CONFIG_HDM_DIM2=y
CONFIG_HDM_I2C=y
CONFIG_HDM_USB=y
#
# Old ISDN4Linux (deprecated)
#
# CONFIG_X86_PLATFORM_DEVICES is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_PSTORE=y
# CONFIG_CROS_EC_CHARDEV is not set
# CONFIG_CROS_EC_LPC is not set
CONFIG_CROS_EC_PROTO=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_WM831X is not set
CONFIG_COMMON_CLK_MAX_GEN=y
# CONFIG_COMMON_CLK_MAX77686 is not set
CONFIG_COMMON_CLK_MAX77802=y
CONFIG_COMMON_CLK_RK808=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI570=y
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_S2MPS11=y
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
# CONFIG_COMMON_CLK_OXNAS is not set
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
# CONFIG_PCC is not set
CONFIG_ALTERA_MBOX=y
# CONFIG_MAILBOX_TEST is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
# CONFIG_AMD_IOMMU is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ARIZONA=y
CONFIG_EXTCON_AXP288=y
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX77843=y
# CONFIG_EXTCON_MAX8997 is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_MEMORY=y
# CONFIG_IIO is not set
CONFIG_NTB=y
CONFIG_NTB_AMD=y
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_PINGPONG is not set
CONFIG_NTB_TOOL=y
CONFIG_NTB_PERF=y
CONFIG_NTB_TRANSPORT=y
CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=y
CONFIG_VME_TSI148=y
#
# VME Board Drivers
#
CONFIG_VMIVME_7805=y
#
# VME Device Drivers
#
CONFIG_VME_USER=y
CONFIG_VME_PIO2=y
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_CRC=y
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_LP3943=y
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_PCA9685=y
# CONFIG_PWM_TWL is not set
# CONFIG_PWM_TWL_LED is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_FMC is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_PHY_SAMSUNG_USB2=y
# CONFIG_PHY_EXYNOS4210_USB2 is not set
# CONFIG_PHY_EXYNOS4X12_USB2 is not set
# CONFIG_PHY_EXYNOS5250_USB2 is not set
# CONFIG_PHY_TUSB1210 is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=y
# CONFIG_MCB is not set
#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set
#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
CONFIG_NVMEM=y
CONFIG_STM=y
# CONFIG_STM_DUMMY is not set
CONFIG_STM_SOURCE_CONSOLE=y
CONFIG_STM_SOURCE_HEARTBEAT=y
# CONFIG_INTEL_TH is not set
#
# FPGA Configuration Support
#
CONFIG_FPGA=y
CONFIG_FPGA_MGR_ZYNQ_FPGA=y
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_ISCSI_IBFT_FIND is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_GOOGLE_FIRMWARE=y
#
# Google Firmware Drivers
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
# CONFIG_ECRYPT_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
# CONFIG_JFFS2_ZLIB is not set
CONFIG_JFFS2_LZO=y
# CONFIG_JFFS2_RTIME is not set
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
# CONFIG_JFFS2_CMODE_PRIORITY is not set
# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_JFFS2_CMODE_FAVOURLZO=y
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
# CONFIG_LOGFS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=y
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_PAGE_POISONING=y
# CONFIG_PAGE_POISONING_NO_SANITY is not set
CONFIG_PAGE_POISONING_ZERO=y
CONFIG_DEBUG_PAGE_REF=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
# CONFIG_TIMER_STATS is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_TORTURE_TEST_RUNNABLE is not set
CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT=y
CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT_DELAY=3
# CONFIG_RCU_TORTURE_TEST_SLOW_INIT is not set
CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP=y
CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY=3
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_PROFILE_ALL_BRANCHES=y
# CONFIG_BRANCH_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_HIST_TRIGGERS is not set
CONFIG_TRACEPOINT_BENCHMARK=y
CONFIG_RING_BUFFER_BENCHMARK=y
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
CONFIG_TRACE_ENUM_MAP_FILE=y
CONFIG_TRACING_EVENTS_GPIO=y
#
# Runtime Testing
#
CONFIG_TEST_LIST_SORT=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=y
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_TEST_HEXDUMP=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
CONFIG_TEST_BITMAP=y
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_TEST_HASH=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_FIRMWARE=y
CONFIG_TEST_UDELAY=y
CONFIG_MEMTEST=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_X86_PTDUMP_CORE=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_WX=y
CONFIG_DOUBLEFAULT=y
CONFIG_DEBUG_TLBFLUSH=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=2
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_ENTRY is not set
CONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_FPU is not set
CONFIG_PUNIT_ATOM_DEBUG=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
# CONFIG_CRYPTO_RSA is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_MCRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_POLY1305_X86_64=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
# CONFIG_CRYPTO_SHA1_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_X86_64=y
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
CONFIG_CRYPTO_DEV_CCP=y
# CONFIG_CRYPTO_DEV_CCP_DD is not set
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=y
CONFIG_CRYPTO_DEV_QAT_C3XXX=y
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=y
CONFIG_CRYPTO_DEV_QAT_C62XVF=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS7_MESSAGE_PARSER is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=y
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
# CONFIG_SG_SPLIT is not set
# CONFIG_SG_POOL is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
[-- Attachment #3: dmesg.xz --]
[-- Type: application/octet-stream, Size: 1064 bytes --]
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
2016-06-27 13:20 [x86/KASLR] ed9f007ee6: -- System halted kernel test robot
@ 2016-06-27 18:59 ` Yinghai Lu
2016-07-01 7:50 ` Baoquan He
1 sibling, 0 replies; 27+ messages in thread
From: Yinghai Lu @ 2016-06-27 18:59 UTC (permalink / raw)
To: kernel test robot
Cc: Kees Cook, LKP ML, tipbuild, LKML, Thomas Gleixner,
Peter Zijlstra, Linus Torvalds, Josh Poimboeuf, H.J. Lu,
H. Peter Anvin, Dmitry Vyukov, Denys Vlasenko, Brian Gerst,
Borislav Petkov, Baoquan He, Andy Lutomirski, Andrey Ryabinin,
Andrew Morton, Ingo Molnar
[-- Attachment #1: Type: text/plain, Size: 442 bytes --]
output is:
early console in setup code
early console in extract_kernel
input_data: 0x0000000008fbb276
input_len: 0x00000000018c6e00
output: 0x0000000001000000
output_len: 0x0000000009867c98
kernel_total_size: 0x0000000008769000
booted via startup_32()
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
Decompressing Linux...
XZ-compressed data is corrupt
-- System halted
Can you apply attached debug patch and send out dmesg?
[-- Attachment #2: revert_79063a7.patch --]
[-- Type: text/x-patch, Size: 2909 bytes --]
---
arch/x86/boot/compressed/misc.c | 24 ------------------------
arch/x86/boot/compressed/misc.h | 10 ----------
arch/x86/boot/compressed/pagetable.c | 2 --
3 files changed, 36 deletions(-)
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -152,23 +152,6 @@ void __putstr(const char *s)
outb(0xff & (pos >> 1), vidport+1);
}
-void __puthex(unsigned long value)
-{
- char alpha[2] = "0";
- int bits;
-
- for (bits = sizeof(value) * 8 - 4; bits >= 0; bits -= 4) {
- unsigned long digit = (value >> bits) & 0xf;
-
- if (digit < 0xA)
- alpha[0] = '0' + digit;
- else
- alpha[0] = 'a' + (digit - 0xA);
-
- __putstr(alpha);
- }
-}
-
#if CONFIG_X86_NEED_RELOCS
static void handle_relocations(void *output, unsigned long output_len,
unsigned long virt_addr)
@@ -365,13 +348,6 @@ asmlinkage __visible void *extract_kerne
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
- /* Report initial kernel position details. */
- debug_putaddr(input_data);
- debug_putaddr(input_len);
- debug_putaddr(output);
- debug_putaddr(output_len);
- debug_putaddr(kernel_total_size);
-
/*
* The memory hole needed for the kernel is the larger of either
* the entire decompressed kernel plus relocation table, or the
Index: linux-2.6/arch/x86/boot/compressed/misc.h
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.h
+++ linux-2.6/arch/x86/boot/compressed/misc.h
@@ -34,27 +34,17 @@ extern memptr free_mem_ptr;
extern memptr free_mem_end_ptr;
extern struct boot_params *boot_params;
void __putstr(const char *s);
-void __puthex(unsigned long value);
#define error_putstr(__x) __putstr(__x)
#define error_puthex(__x) __puthex(__x)
#ifdef CONFIG_X86_VERBOSE_BOOTUP
#define debug_putstr(__x) __putstr(__x)
-#define debug_puthex(__x) __puthex(__x)
-#define debug_putaddr(__x) { \
- debug_putstr(#__x ": 0x"); \
- debug_puthex((unsigned long)(__x)); \
- debug_putstr("\n"); \
- }
#else
static inline void debug_putstr(const char *s)
{ }
-static inline void debug_puthex(const char *s)
-{ }
-#define debug_putaddr(x) /* */
#endif
Index: linux-2.6/arch/x86/boot/compressed/pagetable.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/pagetable.c
+++ linux-2.6/arch/x86/boot/compressed/pagetable.c
@@ -45,8 +45,6 @@ static void *alloc_pgt_page(void *contex
/* Validate there is space available for a new page. */
if (pages->pgt_buf_offset >= pages->pgt_buf_size) {
debug_putstr("out of pgt_buf in " __FILE__ "!?\n");
- debug_putaddr(pages->pgt_buf_offset);
- debug_putaddr(pages->pgt_buf_size);
return NULL;
}
[-- Attachment #3: early_console_more_2_2x.patch --]
[-- Type: text/x-patch, Size: 2026 bytes --]
Subject: [PATCH] x86, boot: Add printf support for early console in compressed/misc.c
Reuse printf.c in x86 setup code.
Later decompresser code could print out more info for debug info.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/boot/compressed/Makefile | 1 +
arch/x86/boot/compressed/misc.h | 7 +++++++
arch/x86/boot/compressed/pagetable.c | 4 ++++
arch/x86/boot/compressed/printf.c | 5 +++++
4 files changed, 17 insertions(+)
Index: linux-2.6/arch/x86/boot/compressed/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/Makefile
+++ linux-2.6/arch/x86/boot/compressed/Makefile
@@ -73,6 +73,7 @@ vmlinux-objs-y := $(obj)/vmlinux.lds $(o
$(obj)/string.o $(obj)/cmdline.o $(obj)/error.o \
$(obj)/piggy.o $(obj)/cpuflags.o
+vmlinux-objs-$(CONFIG_X86_VERBOSE_BOOTUP) += $(obj)/printf.o
vmlinux-objs-$(CONFIG_EARLY_PRINTK) += $(obj)/early_serial_console.o
vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr.o
ifdef CONFIG_X86_64
Index: linux-2.6/arch/x86/boot/compressed/printf.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/boot/compressed/printf.c
@@ -0,0 +1,5 @@
+#include "misc.h"
+
+#define puts(__x) __putstr(__x)
+
+#include "../printf.c"
Index: linux-2.6/arch/x86/boot/compressed/misc.h
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.h
+++ linux-2.6/arch/x86/boot/compressed/misc.h
@@ -37,14 +37,21 @@ void __putstr(const char *s);
#define error_putstr(__x) __putstr(__x)
#define error_puthex(__x) __puthex(__x)
+/* printf.c */
+int sprintf(char *buf, const char *fmt, ...);
+int printf(const char *fmt, ...);
+
#ifdef CONFIG_X86_VERBOSE_BOOTUP
#define debug_putstr(__x) __putstr(__x)
+#define debug_printf printf
#else
static inline void debug_putstr(const char *s)
{ }
+static inline int debug_printf(const char *fmt, ...)
+{ }
#endif
[-- Attachment #4: early_console_more_2_2x_add_0.patch --]
[-- Type: text/x-patch, Size: 3151 bytes --]
Subject: [PATCH] x86, boot: Add print out for input/output info early console in compressed/misc.c
Use printf to print out decompress_kernel input and output info.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/boot/compressed/misc.c | 42 ++++++++++++++++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 2 deletions(-)
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -322,6 +322,8 @@ asmlinkage __visible void *extract_kerne
{
const unsigned long kernel_total_size = VO__end - VO__text;
unsigned long virt_addr = (unsigned long)output;
+ unsigned long output_run_size = max(output_len, kernel_total_size);
+ unsigned long init_size;
/* Retain x86 boot parameters pointer passed from startup_32/64. */
boot_params = rmode;
@@ -348,6 +350,37 @@ asmlinkage __visible void *extract_kerne
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
+ init_size = boot_params->hdr.init_size;
+ debug_putstr("decompress_kernel:\n");
+ debug_printf(" input: [0x%010lx-0x%010lx]\n",
+ (unsigned long)input_data,
+ (unsigned long)input_data + input_len - 1);
+ debug_printf(" output: [0x%010lx-0x%010lx] 0x%08lx: output_len\n",
+ (unsigned long)output,
+ (unsigned long)output + output_len - 1,
+ (unsigned long)output_len);
+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: run_size\n",
+ (unsigned long)output,
+ (unsigned long)output + kernel_total_size - 1,
+ (unsigned long)kernel_total_size);
+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: output_run_size\n",
+ (unsigned long)output,
+ (unsigned long)output + output_run_size - 1,
+ (unsigned long)output_run_size);
+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: init_size\n",
+ (unsigned long)output,
+ (unsigned long)output + init_size - 1,
+ (unsigned long)init_size);
+ debug_printf("ZO text/data: [0x%010lx-0x%010lx]\n",
+ (unsigned long)input_data + input_len,
+ (unsigned long)output + init_size - 1);
+ debug_printf(" ZO heap: [0x%010lx-0x%010lx]\n",
+ (unsigned long)heap,
+ (unsigned long)heap + BOOT_HEAP_SIZE - 1);
+ debug_printf(" VO bss/brk: [0x%010lx-0x%010lx]\n",
+ (unsigned long)output + (VO___bss_start - VO__text),
+ (unsigned long)output + kernel_total_size - 1);
+
/*
* The memory hole needed for the kernel is the larger of either
* the entire decompressed kernel plus relocation table, or the
@@ -355,8 +388,13 @@ asmlinkage __visible void *extract_kerne
*/
choose_random_location((unsigned long)input_data, input_len,
(unsigned long *)&output,
- max(output_len, kernel_total_size),
- &virt_addr);
+ output_run_size, &virt_addr);
+
+ if ((unsigned long)output != virt_addr)
+ debug_printf(" new output: [0x%010lx-0x%010lx] 0x%08lx: output_run_size\n",
+ virt_addr,
+ virt_addr + output_run_size - 1,
+ output_run_size);
/* Validate memory location choices. */
if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
[-- Attachment #5: early_console_more_2_2x_add_1.patch --]
[-- Type: text/x-patch, Size: 1695 bytes --]
Subject: [PATCH] x86, boot: Add more debug printout in compressed/misc.c
with support that use printf.c in x86 setup code.
print out more info for debug info.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/boot/compressed/misc.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -287,7 +287,7 @@ static void parse_elf(void *output)
return;
}
- debug_putstr("Parsing ELF... ");
+ debug_putstr("Parsing ELF...\n");
phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
if (!phdrs)
@@ -307,6 +307,11 @@ static void parse_elf(void *output)
dest = (void *)(phdr->p_paddr);
#endif
memmove(dest, output + phdr->p_offset, phdr->p_filesz);
+ debug_printf(" parse_elf: [0x%010lx-0x%010lx] <=== [0x%010lx-0x%010lx]\n",
+ (unsigned long)dest,
+ (unsigned long)dest + phdr->p_filesz - 1,
+ (unsigned long)output + phdr->p_offset,
+ (unsigned long)output + phdr->p_offset + phdr->p_filesz - 1);
break;
default: /* Ignore other PT_* */ break;
}
@@ -431,6 +436,11 @@ asmlinkage __visible void *extract_kerne
error("Wrong destination address");
#endif
+ debug_printf(" decompress: [0x%010lx-0x%010lx] <=== [0x%010lx-0x%010lx]\n",
+ (unsigned long)output,
+ (unsigned long)output + output_len - 1,
+ (unsigned long)input_data,
+ (unsigned long)input_data + input_len - 1);
debug_putstr("\nDecompressing Linux... ");
__decompress(input_data, input_len, NULL, NULL, output, output_len,
NULL, error);
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-06-27 18:59 ` Yinghai Lu
0 siblings, 0 replies; 27+ messages in thread
From: Yinghai Lu @ 2016-06-27 18:59 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 462 bytes --]
output is:
early console in setup code
early console in extract_kernel
input_data: 0x0000000008fbb276
input_len: 0x00000000018c6e00
output: 0x0000000001000000
output_len: 0x0000000009867c98
kernel_total_size: 0x0000000008769000
booted via startup_32()
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
Decompressing Linux...
XZ-compressed data is corrupt
-- System halted
Can you apply attached debug patch and send out dmesg?
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: revert_79063a7.patch --]
[-- Type: text/x-patch, Size: 2909 bytes --]
---
arch/x86/boot/compressed/misc.c | 24 ------------------------
arch/x86/boot/compressed/misc.h | 10 ----------
arch/x86/boot/compressed/pagetable.c | 2 --
3 files changed, 36 deletions(-)
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -152,23 +152,6 @@ void __putstr(const char *s)
outb(0xff & (pos >> 1), vidport+1);
}
-void __puthex(unsigned long value)
-{
- char alpha[2] = "0";
- int bits;
-
- for (bits = sizeof(value) * 8 - 4; bits >= 0; bits -= 4) {
- unsigned long digit = (value >> bits) & 0xf;
-
- if (digit < 0xA)
- alpha[0] = '0' + digit;
- else
- alpha[0] = 'a' + (digit - 0xA);
-
- __putstr(alpha);
- }
-}
-
#if CONFIG_X86_NEED_RELOCS
static void handle_relocations(void *output, unsigned long output_len,
unsigned long virt_addr)
@@ -365,13 +348,6 @@ asmlinkage __visible void *extract_kerne
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
- /* Report initial kernel position details. */
- debug_putaddr(input_data);
- debug_putaddr(input_len);
- debug_putaddr(output);
- debug_putaddr(output_len);
- debug_putaddr(kernel_total_size);
-
/*
* The memory hole needed for the kernel is the larger of either
* the entire decompressed kernel plus relocation table, or the
Index: linux-2.6/arch/x86/boot/compressed/misc.h
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.h
+++ linux-2.6/arch/x86/boot/compressed/misc.h
@@ -34,27 +34,17 @@ extern memptr free_mem_ptr;
extern memptr free_mem_end_ptr;
extern struct boot_params *boot_params;
void __putstr(const char *s);
-void __puthex(unsigned long value);
#define error_putstr(__x) __putstr(__x)
#define error_puthex(__x) __puthex(__x)
#ifdef CONFIG_X86_VERBOSE_BOOTUP
#define debug_putstr(__x) __putstr(__x)
-#define debug_puthex(__x) __puthex(__x)
-#define debug_putaddr(__x) { \
- debug_putstr(#__x ": 0x"); \
- debug_puthex((unsigned long)(__x)); \
- debug_putstr("\n"); \
- }
#else
static inline void debug_putstr(const char *s)
{ }
-static inline void debug_puthex(const char *s)
-{ }
-#define debug_putaddr(x) /* */
#endif
Index: linux-2.6/arch/x86/boot/compressed/pagetable.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/pagetable.c
+++ linux-2.6/arch/x86/boot/compressed/pagetable.c
@@ -45,8 +45,6 @@ static void *alloc_pgt_page(void *contex
/* Validate there is space available for a new page. */
if (pages->pgt_buf_offset >= pages->pgt_buf_size) {
debug_putstr("out of pgt_buf in " __FILE__ "!?\n");
- debug_putaddr(pages->pgt_buf_offset);
- debug_putaddr(pages->pgt_buf_size);
return NULL;
}
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: early_console_more_2_2x.patch --]
[-- Type: text/x-patch, Size: 2026 bytes --]
Subject: [PATCH] x86, boot: Add printf support for early console in compressed/misc.c
Reuse printf.c in x86 setup code.
Later decompresser code could print out more info for debug info.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/boot/compressed/Makefile | 1 +
arch/x86/boot/compressed/misc.h | 7 +++++++
arch/x86/boot/compressed/pagetable.c | 4 ++++
arch/x86/boot/compressed/printf.c | 5 +++++
4 files changed, 17 insertions(+)
Index: linux-2.6/arch/x86/boot/compressed/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/Makefile
+++ linux-2.6/arch/x86/boot/compressed/Makefile
@@ -73,6 +73,7 @@ vmlinux-objs-y := $(obj)/vmlinux.lds $(o
$(obj)/string.o $(obj)/cmdline.o $(obj)/error.o \
$(obj)/piggy.o $(obj)/cpuflags.o
+vmlinux-objs-$(CONFIG_X86_VERBOSE_BOOTUP) += $(obj)/printf.o
vmlinux-objs-$(CONFIG_EARLY_PRINTK) += $(obj)/early_serial_console.o
vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr.o
ifdef CONFIG_X86_64
Index: linux-2.6/arch/x86/boot/compressed/printf.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/boot/compressed/printf.c
@@ -0,0 +1,5 @@
+#include "misc.h"
+
+#define puts(__x) __putstr(__x)
+
+#include "../printf.c"
Index: linux-2.6/arch/x86/boot/compressed/misc.h
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.h
+++ linux-2.6/arch/x86/boot/compressed/misc.h
@@ -37,14 +37,21 @@ void __putstr(const char *s);
#define error_putstr(__x) __putstr(__x)
#define error_puthex(__x) __puthex(__x)
+/* printf.c */
+int sprintf(char *buf, const char *fmt, ...);
+int printf(const char *fmt, ...);
+
#ifdef CONFIG_X86_VERBOSE_BOOTUP
#define debug_putstr(__x) __putstr(__x)
+#define debug_printf printf
#else
static inline void debug_putstr(const char *s)
{ }
+static inline int debug_printf(const char *fmt, ...)
+{ }
#endif
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #4: early_console_more_2_2x_add_0.patch --]
[-- Type: text/x-patch, Size: 3151 bytes --]
Subject: [PATCH] x86, boot: Add print out for input/output info early console in compressed/misc.c
Use printf to print out decompress_kernel input and output info.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/boot/compressed/misc.c | 42 ++++++++++++++++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 2 deletions(-)
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -322,6 +322,8 @@ asmlinkage __visible void *extract_kerne
{
const unsigned long kernel_total_size = VO__end - VO__text;
unsigned long virt_addr = (unsigned long)output;
+ unsigned long output_run_size = max(output_len, kernel_total_size);
+ unsigned long init_size;
/* Retain x86 boot parameters pointer passed from startup_32/64. */
boot_params = rmode;
@@ -348,6 +350,37 @@ asmlinkage __visible void *extract_kerne
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
+ init_size = boot_params->hdr.init_size;
+ debug_putstr("decompress_kernel:\n");
+ debug_printf(" input: [0x%010lx-0x%010lx]\n",
+ (unsigned long)input_data,
+ (unsigned long)input_data + input_len - 1);
+ debug_printf(" output: [0x%010lx-0x%010lx] 0x%08lx: output_len\n",
+ (unsigned long)output,
+ (unsigned long)output + output_len - 1,
+ (unsigned long)output_len);
+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: run_size\n",
+ (unsigned long)output,
+ (unsigned long)output + kernel_total_size - 1,
+ (unsigned long)kernel_total_size);
+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: output_run_size\n",
+ (unsigned long)output,
+ (unsigned long)output + output_run_size - 1,
+ (unsigned long)output_run_size);
+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: init_size\n",
+ (unsigned long)output,
+ (unsigned long)output + init_size - 1,
+ (unsigned long)init_size);
+ debug_printf("ZO text/data: [0x%010lx-0x%010lx]\n",
+ (unsigned long)input_data + input_len,
+ (unsigned long)output + init_size - 1);
+ debug_printf(" ZO heap: [0x%010lx-0x%010lx]\n",
+ (unsigned long)heap,
+ (unsigned long)heap + BOOT_HEAP_SIZE - 1);
+ debug_printf(" VO bss/brk: [0x%010lx-0x%010lx]\n",
+ (unsigned long)output + (VO___bss_start - VO__text),
+ (unsigned long)output + kernel_total_size - 1);
+
/*
* The memory hole needed for the kernel is the larger of either
* the entire decompressed kernel plus relocation table, or the
@@ -355,8 +388,13 @@ asmlinkage __visible void *extract_kerne
*/
choose_random_location((unsigned long)input_data, input_len,
(unsigned long *)&output,
- max(output_len, kernel_total_size),
- &virt_addr);
+ output_run_size, &virt_addr);
+
+ if ((unsigned long)output != virt_addr)
+ debug_printf(" new output: [0x%010lx-0x%010lx] 0x%08lx: output_run_size\n",
+ virt_addr,
+ virt_addr + output_run_size - 1,
+ output_run_size);
/* Validate memory location choices. */
if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #5: early_console_more_2_2x_add_1.patch --]
[-- Type: text/x-patch, Size: 1695 bytes --]
Subject: [PATCH] x86, boot: Add more debug printout in compressed/misc.c
with support that use printf.c in x86 setup code.
print out more info for debug info.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/boot/compressed/misc.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -287,7 +287,7 @@ static void parse_elf(void *output)
return;
}
- debug_putstr("Parsing ELF... ");
+ debug_putstr("Parsing ELF...\n");
phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
if (!phdrs)
@@ -307,6 +307,11 @@ static void parse_elf(void *output)
dest = (void *)(phdr->p_paddr);
#endif
memmove(dest, output + phdr->p_offset, phdr->p_filesz);
+ debug_printf(" parse_elf: [0x%010lx-0x%010lx] <=== [0x%010lx-0x%010lx]\n",
+ (unsigned long)dest,
+ (unsigned long)dest + phdr->p_filesz - 1,
+ (unsigned long)output + phdr->p_offset,
+ (unsigned long)output + phdr->p_offset + phdr->p_filesz - 1);
break;
default: /* Ignore other PT_* */ break;
}
@@ -431,6 +436,11 @@ asmlinkage __visible void *extract_kerne
error("Wrong destination address");
#endif
+ debug_printf(" decompress: [0x%010lx-0x%010lx] <=== [0x%010lx-0x%010lx]\n",
+ (unsigned long)output,
+ (unsigned long)output + output_len - 1,
+ (unsigned long)input_data,
+ (unsigned long)input_data + input_len - 1);
debug_putstr("\nDecompressing Linux... ");
__decompress(input_data, input_len, NULL, NULL, output, output_len,
NULL, error);
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
2016-06-27 18:59 ` Yinghai Lu
(?)
@ 2016-06-28 5:43 ` Ye Xiaolong
2016-06-28 19:49 ` Yinghai Lu
-1 siblings, 1 reply; 27+ messages in thread
From: Ye Xiaolong @ 2016-06-28 5:43 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 11066 bytes --]
On Mon, Jun 27, 2016 at 11:59:37AM -0700, Yinghai Lu wrote:
>output is:
>
>early console in setup code
>early console in extract_kernel
>input_data: 0x0000000008fbb276
>input_len: 0x00000000018c6e00
>output: 0x0000000001000000
>output_len: 0x0000000009867c98
>kernel_total_size: 0x0000000008769000
>booted via startup_32()
>Physical KASLR using RDTSC...
>Virtual KASLR using RDTSC...
>
>Decompressing Linux...
>
>XZ-compressed data is corrupt
>
> -- System halted
>
>Can you apply attached debug patch and send out dmesg?
There are 4 patches you attached, do you mean to apply them all based on
commit ed9f007ee6? I tried and seemed they can't apply clearly on it.
Thanks,
Xiaolong
>---
> arch/x86/boot/compressed/misc.c | 24 ------------------------
> arch/x86/boot/compressed/misc.h | 10 ----------
> arch/x86/boot/compressed/pagetable.c | 2 --
> 3 files changed, 36 deletions(-)
>
>Index: linux-2.6/arch/x86/boot/compressed/misc.c
>===================================================================
>--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
>+++ linux-2.6/arch/x86/boot/compressed/misc.c
>@@ -152,23 +152,6 @@ void __putstr(const char *s)
> outb(0xff & (pos >> 1), vidport+1);
> }
>
>-void __puthex(unsigned long value)
>-{
>- char alpha[2] = "0";
>- int bits;
>-
>- for (bits = sizeof(value) * 8 - 4; bits >= 0; bits -= 4) {
>- unsigned long digit = (value >> bits) & 0xf;
>-
>- if (digit < 0xA)
>- alpha[0] = '0' + digit;
>- else
>- alpha[0] = 'a' + (digit - 0xA);
>-
>- __putstr(alpha);
>- }
>-}
>-
> #if CONFIG_X86_NEED_RELOCS
> static void handle_relocations(void *output, unsigned long output_len,
> unsigned long virt_addr)
>@@ -365,13 +348,6 @@ asmlinkage __visible void *extract_kerne
> free_mem_ptr = heap; /* Heap */
> free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
>
>- /* Report initial kernel position details. */
>- debug_putaddr(input_data);
>- debug_putaddr(input_len);
>- debug_putaddr(output);
>- debug_putaddr(output_len);
>- debug_putaddr(kernel_total_size);
>-
> /*
> * The memory hole needed for the kernel is the larger of either
> * the entire decompressed kernel plus relocation table, or the
>Index: linux-2.6/arch/x86/boot/compressed/misc.h
>===================================================================
>--- linux-2.6.orig/arch/x86/boot/compressed/misc.h
>+++ linux-2.6/arch/x86/boot/compressed/misc.h
>@@ -34,27 +34,17 @@ extern memptr free_mem_ptr;
> extern memptr free_mem_end_ptr;
> extern struct boot_params *boot_params;
> void __putstr(const char *s);
>-void __puthex(unsigned long value);
> #define error_putstr(__x) __putstr(__x)
> #define error_puthex(__x) __puthex(__x)
>
> #ifdef CONFIG_X86_VERBOSE_BOOTUP
>
> #define debug_putstr(__x) __putstr(__x)
>-#define debug_puthex(__x) __puthex(__x)
>-#define debug_putaddr(__x) { \
>- debug_putstr(#__x ": 0x"); \
>- debug_puthex((unsigned long)(__x)); \
>- debug_putstr("\n"); \
>- }
>
> #else
>
> static inline void debug_putstr(const char *s)
> { }
>-static inline void debug_puthex(const char *s)
>-{ }
>-#define debug_putaddr(x) /* */
>
> #endif
>
>Index: linux-2.6/arch/x86/boot/compressed/pagetable.c
>===================================================================
>--- linux-2.6.orig/arch/x86/boot/compressed/pagetable.c
>+++ linux-2.6/arch/x86/boot/compressed/pagetable.c
>@@ -45,8 +45,6 @@ static void *alloc_pgt_page(void *contex
> /* Validate there is space available for a new page. */
> if (pages->pgt_buf_offset >= pages->pgt_buf_size) {
> debug_putstr("out of pgt_buf in " __FILE__ "!?\n");
>- debug_putaddr(pages->pgt_buf_offset);
>- debug_putaddr(pages->pgt_buf_size);
> return NULL;
> }
>
>Subject: [PATCH] x86, boot: Add printf support for early console in compressed/misc.c
>
>Reuse printf.c in x86 setup code.
>
>Later decompresser code could print out more info for debug info.
>
>Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>
>---
> arch/x86/boot/compressed/Makefile | 1 +
> arch/x86/boot/compressed/misc.h | 7 +++++++
> arch/x86/boot/compressed/pagetable.c | 4 ++++
> arch/x86/boot/compressed/printf.c | 5 +++++
> 4 files changed, 17 insertions(+)
>
>Index: linux-2.6/arch/x86/boot/compressed/Makefile
>===================================================================
>--- linux-2.6.orig/arch/x86/boot/compressed/Makefile
>+++ linux-2.6/arch/x86/boot/compressed/Makefile
>@@ -73,6 +73,7 @@ vmlinux-objs-y := $(obj)/vmlinux.lds $(o
> $(obj)/string.o $(obj)/cmdline.o $(obj)/error.o \
> $(obj)/piggy.o $(obj)/cpuflags.o
>
>+vmlinux-objs-$(CONFIG_X86_VERBOSE_BOOTUP) += $(obj)/printf.o
> vmlinux-objs-$(CONFIG_EARLY_PRINTK) += $(obj)/early_serial_console.o
> vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr.o
> ifdef CONFIG_X86_64
>Index: linux-2.6/arch/x86/boot/compressed/printf.c
>===================================================================
>--- /dev/null
>+++ linux-2.6/arch/x86/boot/compressed/printf.c
>@@ -0,0 +1,5 @@
>+#include "misc.h"
>+
>+#define puts(__x) __putstr(__x)
>+
>+#include "../printf.c"
>Index: linux-2.6/arch/x86/boot/compressed/misc.h
>===================================================================
>--- linux-2.6.orig/arch/x86/boot/compressed/misc.h
>+++ linux-2.6/arch/x86/boot/compressed/misc.h
>@@ -37,14 +37,21 @@ void __putstr(const char *s);
> #define error_putstr(__x) __putstr(__x)
> #define error_puthex(__x) __puthex(__x)
>
>+/* printf.c */
>+int sprintf(char *buf, const char *fmt, ...);
>+int printf(const char *fmt, ...);
>+
> #ifdef CONFIG_X86_VERBOSE_BOOTUP
>
> #define debug_putstr(__x) __putstr(__x)
>+#define debug_printf printf
>
> #else
>
> static inline void debug_putstr(const char *s)
> { }
>+static inline int debug_printf(const char *fmt, ...)
>+{ }
>
> #endif
>
>Subject: [PATCH] x86, boot: Add print out for input/output info early console in compressed/misc.c
>
>Use printf to print out decompress_kernel input and output info.
>
>Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>
>---
> arch/x86/boot/compressed/misc.c | 42 ++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 40 insertions(+), 2 deletions(-)
>
>Index: linux-2.6/arch/x86/boot/compressed/misc.c
>===================================================================
>--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
>+++ linux-2.6/arch/x86/boot/compressed/misc.c
>@@ -322,6 +322,8 @@ asmlinkage __visible void *extract_kerne
> {
> const unsigned long kernel_total_size = VO__end - VO__text;
> unsigned long virt_addr = (unsigned long)output;
>+ unsigned long output_run_size = max(output_len, kernel_total_size);
>+ unsigned long init_size;
>
> /* Retain x86 boot parameters pointer passed from startup_32/64. */
> boot_params = rmode;
>@@ -348,6 +350,37 @@ asmlinkage __visible void *extract_kerne
> free_mem_ptr = heap; /* Heap */
> free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
>
>+ init_size = boot_params->hdr.init_size;
>+ debug_putstr("decompress_kernel:\n");
>+ debug_printf(" input: [0x%010lx-0x%010lx]\n",
>+ (unsigned long)input_data,
>+ (unsigned long)input_data + input_len - 1);
>+ debug_printf(" output: [0x%010lx-0x%010lx] 0x%08lx: output_len\n",
>+ (unsigned long)output,
>+ (unsigned long)output + output_len - 1,
>+ (unsigned long)output_len);
>+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: run_size\n",
>+ (unsigned long)output,
>+ (unsigned long)output + kernel_total_size - 1,
>+ (unsigned long)kernel_total_size);
>+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: output_run_size\n",
>+ (unsigned long)output,
>+ (unsigned long)output + output_run_size - 1,
>+ (unsigned long)output_run_size);
>+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: init_size\n",
>+ (unsigned long)output,
>+ (unsigned long)output + init_size - 1,
>+ (unsigned long)init_size);
>+ debug_printf("ZO text/data: [0x%010lx-0x%010lx]\n",
>+ (unsigned long)input_data + input_len,
>+ (unsigned long)output + init_size - 1);
>+ debug_printf(" ZO heap: [0x%010lx-0x%010lx]\n",
>+ (unsigned long)heap,
>+ (unsigned long)heap + BOOT_HEAP_SIZE - 1);
>+ debug_printf(" VO bss/brk: [0x%010lx-0x%010lx]\n",
>+ (unsigned long)output + (VO___bss_start - VO__text),
>+ (unsigned long)output + kernel_total_size - 1);
>+
> /*
> * The memory hole needed for the kernel is the larger of either
> * the entire decompressed kernel plus relocation table, or the
>@@ -355,8 +388,13 @@ asmlinkage __visible void *extract_kerne
> */
> choose_random_location((unsigned long)input_data, input_len,
> (unsigned long *)&output,
>- max(output_len, kernel_total_size),
>- &virt_addr);
>+ output_run_size, &virt_addr);
>+
>+ if ((unsigned long)output != virt_addr)
>+ debug_printf(" new output: [0x%010lx-0x%010lx] 0x%08lx: output_run_size\n",
>+ virt_addr,
>+ virt_addr + output_run_size - 1,
>+ output_run_size);
>
> /* Validate memory location choices. */
> if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
>Subject: [PATCH] x86, boot: Add more debug printout in compressed/misc.c
>
>with support that use printf.c in x86 setup code.
>print out more info for debug info.
>
>Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>
>
>---
> arch/x86/boot/compressed/misc.c | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
>Index: linux-2.6/arch/x86/boot/compressed/misc.c
>===================================================================
>--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
>+++ linux-2.6/arch/x86/boot/compressed/misc.c
>@@ -287,7 +287,7 @@ static void parse_elf(void *output)
> return;
> }
>
>- debug_putstr("Parsing ELF... ");
>+ debug_putstr("Parsing ELF...\n");
>
> phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
> if (!phdrs)
>@@ -307,6 +307,11 @@ static void parse_elf(void *output)
> dest = (void *)(phdr->p_paddr);
> #endif
> memmove(dest, output + phdr->p_offset, phdr->p_filesz);
>+ debug_printf(" parse_elf: [0x%010lx-0x%010lx] <=== [0x%010lx-0x%010lx]\n",
>+ (unsigned long)dest,
>+ (unsigned long)dest + phdr->p_filesz - 1,
>+ (unsigned long)output + phdr->p_offset,
>+ (unsigned long)output + phdr->p_offset + phdr->p_filesz - 1);
> break;
> default: /* Ignore other PT_* */ break;
> }
>@@ -431,6 +436,11 @@ asmlinkage __visible void *extract_kerne
> error("Wrong destination address");
> #endif
>
>+ debug_printf(" decompress: [0x%010lx-0x%010lx] <=== [0x%010lx-0x%010lx]\n",
>+ (unsigned long)output,
>+ (unsigned long)output + output_len - 1,
>+ (unsigned long)input_data,
>+ (unsigned long)input_data + input_len - 1);
> debug_putstr("\nDecompressing Linux... ");
> __decompress(input_data, input_len, NULL, NULL, output, output_len,
> NULL, error);
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
2016-06-28 5:43 ` Ye Xiaolong
@ 2016-06-28 19:49 ` Yinghai Lu
2016-06-29 20:08 ` Yinghai Lu
0 siblings, 1 reply; 27+ messages in thread
From: Yinghai Lu @ 2016-06-28 19:49 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 975 bytes --]
On Mon, Jun 27, 2016 at 10:43 PM, Ye Xiaolong <xiaolong.ye@intel.com> wrote:
> On Mon, Jun 27, 2016 at 11:59:37AM -0700, Yinghai Lu wrote:
>>output is:
>>
>>early console in setup code
>>early console in extract_kernel
>>input_data: 0x0000000008fbb276
>>input_len: 0x00000000018c6e00
>>output: 0x0000000001000000
>>output_len: 0x0000000009867c98
>>kernel_total_size: 0x0000000008769000
>>booted via startup_32()
>>Physical KASLR using RDTSC...
>>Virtual KASLR using RDTSC...
>>
>>Decompressing Linux...
>>
>>XZ-compressed data is corrupt
>>
>> -- System halted
>>
>>Can you apply attached debug patch and send out dmesg?
>
> There are 4 patches you attached, do you mean to apply them all based on
> commit ed9f007ee6? I tried and seemed they can't apply clearly on it.
Can you try to apply them all manually ?
should be simple, as it just print stuff.
It should be applied cleanly on current linus tree + tip x86/boot.
Thanks
Yinghai
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
2016-06-28 19:49 ` Yinghai Lu
@ 2016-06-29 20:08 ` Yinghai Lu
0 siblings, 0 replies; 27+ messages in thread
From: Yinghai Lu @ 2016-06-29 20:08 UTC (permalink / raw)
To: Ye Xiaolong; +Cc: LKP ML, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 1120 bytes --]
On Tue, Jun 28, 2016 at 12:49 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> On Mon, Jun 27, 2016 at 10:43 PM, Ye Xiaolong <xiaolong.ye@intel.com> wrote:
>> On Mon, Jun 27, 2016 at 11:59:37AM -0700, Yinghai Lu wrote:
>>>output is:
>>>
>>>early console in setup code
>>>early console in extract_kernel
>>>input_data: 0x0000000008fbb276
>>>input_len: 0x00000000018c6e00
>>>output: 0x0000000001000000
>>>output_len: 0x0000000009867c98
>>>kernel_total_size: 0x0000000008769000
>>>booted via startup_32()
>>>Physical KASLR using RDTSC...
>>>Virtual KASLR using RDTSC...
>>>
>>>Decompressing Linux...
>>>
>>>XZ-compressed data is corrupt
>>>
>>> -- System halted
>>>
>>>Can you apply attached debug patch and send out dmesg?
>>
>> There are 4 patches you attached, do you mean to apply them all based on
>> commit ed9f007ee6? I tried and seemed they can't apply clearly on it.
>
Please check attached updated debug patches.
You should apply them after ed9f007ee6 in following sequence
revert_79063a7.patch
early_console_more_2_2x.patch
early_console_more_2_2x_add_0.patch
early_console_more_2_2x_add_1.patch
Thanks
Yinghai
[-- Attachment #2: revert_79063a7.patch --]
[-- Type: text/x-patch, Size: 2909 bytes --]
---
arch/x86/boot/compressed/misc.c | 24 ------------------------
arch/x86/boot/compressed/misc.h | 10 ----------
arch/x86/boot/compressed/pagetable.c | 2 --
3 files changed, 36 deletions(-)
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -152,23 +152,6 @@ void __putstr(const char *s)
outb(0xff & (pos >> 1), vidport+1);
}
-void __puthex(unsigned long value)
-{
- char alpha[2] = "0";
- int bits;
-
- for (bits = sizeof(value) * 8 - 4; bits >= 0; bits -= 4) {
- unsigned long digit = (value >> bits) & 0xf;
-
- if (digit < 0xA)
- alpha[0] = '0' + digit;
- else
- alpha[0] = 'a' + (digit - 0xA);
-
- __putstr(alpha);
- }
-}
-
#if CONFIG_X86_NEED_RELOCS
static void handle_relocations(void *output, unsigned long output_len,
unsigned long virt_addr)
@@ -365,13 +348,6 @@ asmlinkage __visible void *extract_kerne
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
- /* Report initial kernel position details. */
- debug_putaddr(input_data);
- debug_putaddr(input_len);
- debug_putaddr(output);
- debug_putaddr(output_len);
- debug_putaddr(kernel_total_size);
-
/*
* The memory hole needed for the kernel is the larger of either
* the entire decompressed kernel plus relocation table, or the
Index: linux-2.6/arch/x86/boot/compressed/misc.h
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.h
+++ linux-2.6/arch/x86/boot/compressed/misc.h
@@ -34,27 +34,17 @@ extern memptr free_mem_ptr;
extern memptr free_mem_end_ptr;
extern struct boot_params *boot_params;
void __putstr(const char *s);
-void __puthex(unsigned long value);
#define error_putstr(__x) __putstr(__x)
#define error_puthex(__x) __puthex(__x)
#ifdef CONFIG_X86_VERBOSE_BOOTUP
#define debug_putstr(__x) __putstr(__x)
-#define debug_puthex(__x) __puthex(__x)
-#define debug_putaddr(__x) { \
- debug_putstr(#__x ": 0x"); \
- debug_puthex((unsigned long)(__x)); \
- debug_putstr("\n"); \
- }
#else
static inline void debug_putstr(const char *s)
{ }
-static inline void debug_puthex(const char *s)
-{ }
-#define debug_putaddr(x) /* */
#endif
Index: linux-2.6/arch/x86/boot/compressed/pagetable.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/pagetable.c
+++ linux-2.6/arch/x86/boot/compressed/pagetable.c
@@ -45,8 +45,6 @@ static void *alloc_pgt_page(void *contex
/* Validate there is space available for a new page. */
if (pages->pgt_buf_offset >= pages->pgt_buf_size) {
debug_putstr("out of pgt_buf in " __FILE__ "!?\n");
- debug_putaddr(pages->pgt_buf_offset);
- debug_putaddr(pages->pgt_buf_size);
return NULL;
}
[-- Attachment #3: early_console_more_2_2x.patch --]
[-- Type: text/x-patch, Size: 2026 bytes --]
Subject: [PATCH] x86, boot: Add printf support for early console in compressed/misc.c
Reuse printf.c in x86 setup code.
Later decompresser code could print out more info for debug info.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/boot/compressed/Makefile | 1 +
arch/x86/boot/compressed/misc.h | 7 +++++++
arch/x86/boot/compressed/pagetable.c | 4 ++++
arch/x86/boot/compressed/printf.c | 5 +++++
4 files changed, 17 insertions(+)
Index: linux-2.6/arch/x86/boot/compressed/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/Makefile
+++ linux-2.6/arch/x86/boot/compressed/Makefile
@@ -73,6 +73,7 @@ vmlinux-objs-y := $(obj)/vmlinux.lds $(o
$(obj)/string.o $(obj)/cmdline.o $(obj)/error.o \
$(obj)/piggy.o $(obj)/cpuflags.o
+vmlinux-objs-$(CONFIG_X86_VERBOSE_BOOTUP) += $(obj)/printf.o
vmlinux-objs-$(CONFIG_EARLY_PRINTK) += $(obj)/early_serial_console.o
vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr.o
ifdef CONFIG_X86_64
Index: linux-2.6/arch/x86/boot/compressed/printf.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/boot/compressed/printf.c
@@ -0,0 +1,5 @@
+#include "misc.h"
+
+#define puts(__x) __putstr(__x)
+
+#include "../printf.c"
Index: linux-2.6/arch/x86/boot/compressed/misc.h
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.h
+++ linux-2.6/arch/x86/boot/compressed/misc.h
@@ -37,14 +37,21 @@ void __putstr(const char *s);
#define error_putstr(__x) __putstr(__x)
#define error_puthex(__x) __puthex(__x)
+/* printf.c */
+int sprintf(char *buf, const char *fmt, ...);
+int printf(const char *fmt, ...);
+
#ifdef CONFIG_X86_VERBOSE_BOOTUP
#define debug_putstr(__x) __putstr(__x)
+#define debug_printf printf
#else
static inline void debug_putstr(const char *s)
{ }
+static inline int debug_printf(const char *fmt, ...)
+{ }
#endif
[-- Attachment #4: early_console_more_2_2x_add_0.patch --]
[-- Type: text/x-patch, Size: 3299 bytes --]
Subject: [PATCH] x86, boot: Add print out for input/output info early console in compressed/misc.c
Use printf to print out decompress_kernel input and output info.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/boot/compressed/misc.c | 45 ++++++++++++++++++++++++++++++++++++++--
1 file changed, 43 insertions(+), 2 deletions(-)
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -322,6 +322,9 @@ asmlinkage __visible void *extract_kerne
{
const unsigned long kernel_total_size = VO__end - VO__text;
unsigned long virt_addr = (unsigned long)output;
+ unsigned char *output_orig = output;
+ unsigned long output_run_size = max(output_len, kernel_total_size);
+ unsigned long init_size;
/* Retain x86 boot parameters pointer passed from startup_32/64. */
boot_params = rmode;
@@ -348,6 +351,37 @@ asmlinkage __visible void *extract_kerne
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
+ init_size = boot_params->hdr.init_size;
+ debug_putstr("decompress_kernel:\n");
+ debug_printf(" input: [0x%010lx-0x%010lx]\n",
+ (unsigned long)input_data,
+ (unsigned long)input_data + input_len - 1);
+ debug_printf(" output: [0x%010lx-0x%010lx] 0x%08lx: output_len\n",
+ (unsigned long)output,
+ (unsigned long)output + output_len - 1,
+ (unsigned long)output_len);
+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: run_size\n",
+ (unsigned long)output,
+ (unsigned long)output + kernel_total_size - 1,
+ (unsigned long)kernel_total_size);
+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: output_run_size\n",
+ (unsigned long)output,
+ (unsigned long)output + output_run_size - 1,
+ (unsigned long)output_run_size);
+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: init_size\n",
+ (unsigned long)output,
+ (unsigned long)output + init_size - 1,
+ (unsigned long)init_size);
+ debug_printf("ZO text/data: [0x%010lx-0x%010lx]\n",
+ (unsigned long)input_data + input_len,
+ (unsigned long)output + init_size - 1);
+ debug_printf(" ZO heap: [0x%010lx-0x%010lx]\n",
+ (unsigned long)heap,
+ (unsigned long)heap + BOOT_HEAP_SIZE - 1);
+ debug_printf(" VO bss/brk: [0x%010lx-0x%010lx]\n",
+ (unsigned long)output + (VO___bss_start - VO__text),
+ (unsigned long)output + kernel_total_size - 1);
+
/*
* The memory hole needed for the kernel is the larger of either
* the entire decompressed kernel plus relocation table, or the
@@ -355,8 +389,15 @@ asmlinkage __visible void *extract_kerne
*/
choose_random_location((unsigned long)input_data, input_len,
(unsigned long *)&output,
- max(output_len, kernel_total_size),
- &virt_addr);
+ output_run_size, &virt_addr);
+
+ if (output != output_orig)
+ debug_printf(" new output: [0x%010lx-0x%010lx] 0x%08lx: output_run_size\n",
+ (unsigned long)output,
+ (unsigned long)output + output_run_size - 1,
+ output_run_size);
+ if ((unsigned long)output != virt_addr)
+ debug_printf(" virt_addr: 0x%010lx\n", virt_addr);
/* Validate memory location choices. */
if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
[-- Attachment #5: early_console_more_2_2x_add_1.patch --]
[-- Type: text/x-patch, Size: 1726 bytes --]
Subject: [PATCH] x86, boot: Add more debug printout in compressed/misc.c
with support that use printf.c in x86 setup code.
print out more info for debug info.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/boot/compressed/misc.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -269,7 +269,7 @@ static void parse_elf(void *output)
return;
}
- debug_putstr("Parsing ELF... ");
+ debug_putstr("Parsing ELF...\n");
phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
if (!phdrs)
@@ -289,6 +289,11 @@ static void parse_elf(void *output)
dest = (void *)(phdr->p_paddr);
#endif
memmove(dest, output + phdr->p_offset, phdr->p_filesz);
+ debug_printf(" parse_elf: [0x%010lx-0x%010lx] <=== [0x%010lx-0x%010lx]\n",
+ (unsigned long)dest,
+ (unsigned long)dest + phdr->p_filesz - 1,
+ (unsigned long)output + phdr->p_offset,
+ (unsigned long)output + phdr->p_offset + phdr->p_filesz - 1);
break;
default: /* Ignore other PT_* */ break;
}
@@ -418,6 +423,11 @@ asmlinkage __visible void *extract_kerne
error("Destination virtual address changed when not relocatable");
#endif
+ debug_printf(" decompress: [0x%010lx-0x%010lx] <=== [0x%010lx-0x%010lx]\n",
+ (unsigned long)output,
+ (unsigned long)output + output_len - 1,
+ (unsigned long)input_data,
+ (unsigned long)input_data + input_len - 1);
debug_putstr("\nDecompressing Linux... ");
__decompress(input_data, input_len, NULL, NULL, output, output_len,
NULL, error);
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-06-29 20:08 ` Yinghai Lu
0 siblings, 0 replies; 27+ messages in thread
From: Yinghai Lu @ 2016-06-29 20:08 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 1160 bytes --]
On Tue, Jun 28, 2016 at 12:49 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> On Mon, Jun 27, 2016 at 10:43 PM, Ye Xiaolong <xiaolong.ye@intel.com> wrote:
>> On Mon, Jun 27, 2016 at 11:59:37AM -0700, Yinghai Lu wrote:
>>>output is:
>>>
>>>early console in setup code
>>>early console in extract_kernel
>>>input_data: 0x0000000008fbb276
>>>input_len: 0x00000000018c6e00
>>>output: 0x0000000001000000
>>>output_len: 0x0000000009867c98
>>>kernel_total_size: 0x0000000008769000
>>>booted via startup_32()
>>>Physical KASLR using RDTSC...
>>>Virtual KASLR using RDTSC...
>>>
>>>Decompressing Linux...
>>>
>>>XZ-compressed data is corrupt
>>>
>>> -- System halted
>>>
>>>Can you apply attached debug patch and send out dmesg?
>>
>> There are 4 patches you attached, do you mean to apply them all based on
>> commit ed9f007ee6? I tried and seemed they can't apply clearly on it.
>
Please check attached updated debug patches.
You should apply them after ed9f007ee6 in following sequence
revert_79063a7.patch
early_console_more_2_2x.patch
early_console_more_2_2x_add_0.patch
early_console_more_2_2x_add_1.patch
Thanks
Yinghai
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: revert_79063a7.patch --]
[-- Type: text/x-patch, Size: 2909 bytes --]
---
arch/x86/boot/compressed/misc.c | 24 ------------------------
arch/x86/boot/compressed/misc.h | 10 ----------
arch/x86/boot/compressed/pagetable.c | 2 --
3 files changed, 36 deletions(-)
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -152,23 +152,6 @@ void __putstr(const char *s)
outb(0xff & (pos >> 1), vidport+1);
}
-void __puthex(unsigned long value)
-{
- char alpha[2] = "0";
- int bits;
-
- for (bits = sizeof(value) * 8 - 4; bits >= 0; bits -= 4) {
- unsigned long digit = (value >> bits) & 0xf;
-
- if (digit < 0xA)
- alpha[0] = '0' + digit;
- else
- alpha[0] = 'a' + (digit - 0xA);
-
- __putstr(alpha);
- }
-}
-
#if CONFIG_X86_NEED_RELOCS
static void handle_relocations(void *output, unsigned long output_len,
unsigned long virt_addr)
@@ -365,13 +348,6 @@ asmlinkage __visible void *extract_kerne
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
- /* Report initial kernel position details. */
- debug_putaddr(input_data);
- debug_putaddr(input_len);
- debug_putaddr(output);
- debug_putaddr(output_len);
- debug_putaddr(kernel_total_size);
-
/*
* The memory hole needed for the kernel is the larger of either
* the entire decompressed kernel plus relocation table, or the
Index: linux-2.6/arch/x86/boot/compressed/misc.h
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.h
+++ linux-2.6/arch/x86/boot/compressed/misc.h
@@ -34,27 +34,17 @@ extern memptr free_mem_ptr;
extern memptr free_mem_end_ptr;
extern struct boot_params *boot_params;
void __putstr(const char *s);
-void __puthex(unsigned long value);
#define error_putstr(__x) __putstr(__x)
#define error_puthex(__x) __puthex(__x)
#ifdef CONFIG_X86_VERBOSE_BOOTUP
#define debug_putstr(__x) __putstr(__x)
-#define debug_puthex(__x) __puthex(__x)
-#define debug_putaddr(__x) { \
- debug_putstr(#__x ": 0x"); \
- debug_puthex((unsigned long)(__x)); \
- debug_putstr("\n"); \
- }
#else
static inline void debug_putstr(const char *s)
{ }
-static inline void debug_puthex(const char *s)
-{ }
-#define debug_putaddr(x) /* */
#endif
Index: linux-2.6/arch/x86/boot/compressed/pagetable.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/pagetable.c
+++ linux-2.6/arch/x86/boot/compressed/pagetable.c
@@ -45,8 +45,6 @@ static void *alloc_pgt_page(void *contex
/* Validate there is space available for a new page. */
if (pages->pgt_buf_offset >= pages->pgt_buf_size) {
debug_putstr("out of pgt_buf in " __FILE__ "!?\n");
- debug_putaddr(pages->pgt_buf_offset);
- debug_putaddr(pages->pgt_buf_size);
return NULL;
}
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: early_console_more_2_2x.patch --]
[-- Type: text/x-patch, Size: 2026 bytes --]
Subject: [PATCH] x86, boot: Add printf support for early console in compressed/misc.c
Reuse printf.c in x86 setup code.
Later decompresser code could print out more info for debug info.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/boot/compressed/Makefile | 1 +
arch/x86/boot/compressed/misc.h | 7 +++++++
arch/x86/boot/compressed/pagetable.c | 4 ++++
arch/x86/boot/compressed/printf.c | 5 +++++
4 files changed, 17 insertions(+)
Index: linux-2.6/arch/x86/boot/compressed/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/Makefile
+++ linux-2.6/arch/x86/boot/compressed/Makefile
@@ -73,6 +73,7 @@ vmlinux-objs-y := $(obj)/vmlinux.lds $(o
$(obj)/string.o $(obj)/cmdline.o $(obj)/error.o \
$(obj)/piggy.o $(obj)/cpuflags.o
+vmlinux-objs-$(CONFIG_X86_VERBOSE_BOOTUP) += $(obj)/printf.o
vmlinux-objs-$(CONFIG_EARLY_PRINTK) += $(obj)/early_serial_console.o
vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr.o
ifdef CONFIG_X86_64
Index: linux-2.6/arch/x86/boot/compressed/printf.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/boot/compressed/printf.c
@@ -0,0 +1,5 @@
+#include "misc.h"
+
+#define puts(__x) __putstr(__x)
+
+#include "../printf.c"
Index: linux-2.6/arch/x86/boot/compressed/misc.h
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.h
+++ linux-2.6/arch/x86/boot/compressed/misc.h
@@ -37,14 +37,21 @@ void __putstr(const char *s);
#define error_putstr(__x) __putstr(__x)
#define error_puthex(__x) __puthex(__x)
+/* printf.c */
+int sprintf(char *buf, const char *fmt, ...);
+int printf(const char *fmt, ...);
+
#ifdef CONFIG_X86_VERBOSE_BOOTUP
#define debug_putstr(__x) __putstr(__x)
+#define debug_printf printf
#else
static inline void debug_putstr(const char *s)
{ }
+static inline int debug_printf(const char *fmt, ...)
+{ }
#endif
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #4: early_console_more_2_2x_add_0.patch --]
[-- Type: text/x-patch, Size: 3299 bytes --]
Subject: [PATCH] x86, boot: Add print out for input/output info early console in compressed/misc.c
Use printf to print out decompress_kernel input and output info.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/boot/compressed/misc.c | 45 ++++++++++++++++++++++++++++++++++++++--
1 file changed, 43 insertions(+), 2 deletions(-)
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -322,6 +322,9 @@ asmlinkage __visible void *extract_kerne
{
const unsigned long kernel_total_size = VO__end - VO__text;
unsigned long virt_addr = (unsigned long)output;
+ unsigned char *output_orig = output;
+ unsigned long output_run_size = max(output_len, kernel_total_size);
+ unsigned long init_size;
/* Retain x86 boot parameters pointer passed from startup_32/64. */
boot_params = rmode;
@@ -348,6 +351,37 @@ asmlinkage __visible void *extract_kerne
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
+ init_size = boot_params->hdr.init_size;
+ debug_putstr("decompress_kernel:\n");
+ debug_printf(" input: [0x%010lx-0x%010lx]\n",
+ (unsigned long)input_data,
+ (unsigned long)input_data + input_len - 1);
+ debug_printf(" output: [0x%010lx-0x%010lx] 0x%08lx: output_len\n",
+ (unsigned long)output,
+ (unsigned long)output + output_len - 1,
+ (unsigned long)output_len);
+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: run_size\n",
+ (unsigned long)output,
+ (unsigned long)output + kernel_total_size - 1,
+ (unsigned long)kernel_total_size);
+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: output_run_size\n",
+ (unsigned long)output,
+ (unsigned long)output + output_run_size - 1,
+ (unsigned long)output_run_size);
+ debug_printf(" [0x%010lx-0x%010lx] 0x%08lx: init_size\n",
+ (unsigned long)output,
+ (unsigned long)output + init_size - 1,
+ (unsigned long)init_size);
+ debug_printf("ZO text/data: [0x%010lx-0x%010lx]\n",
+ (unsigned long)input_data + input_len,
+ (unsigned long)output + init_size - 1);
+ debug_printf(" ZO heap: [0x%010lx-0x%010lx]\n",
+ (unsigned long)heap,
+ (unsigned long)heap + BOOT_HEAP_SIZE - 1);
+ debug_printf(" VO bss/brk: [0x%010lx-0x%010lx]\n",
+ (unsigned long)output + (VO___bss_start - VO__text),
+ (unsigned long)output + kernel_total_size - 1);
+
/*
* The memory hole needed for the kernel is the larger of either
* the entire decompressed kernel plus relocation table, or the
@@ -355,8 +389,15 @@ asmlinkage __visible void *extract_kerne
*/
choose_random_location((unsigned long)input_data, input_len,
(unsigned long *)&output,
- max(output_len, kernel_total_size),
- &virt_addr);
+ output_run_size, &virt_addr);
+
+ if (output != output_orig)
+ debug_printf(" new output: [0x%010lx-0x%010lx] 0x%08lx: output_run_size\n",
+ (unsigned long)output,
+ (unsigned long)output + output_run_size - 1,
+ output_run_size);
+ if ((unsigned long)output != virt_addr)
+ debug_printf(" virt_addr: 0x%010lx\n", virt_addr);
/* Validate memory location choices. */
if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #5: early_console_more_2_2x_add_1.patch --]
[-- Type: text/x-patch, Size: 1726 bytes --]
Subject: [PATCH] x86, boot: Add more debug printout in compressed/misc.c
with support that use printf.c in x86 setup code.
print out more info for debug info.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/boot/compressed/misc.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -269,7 +269,7 @@ static void parse_elf(void *output)
return;
}
- debug_putstr("Parsing ELF... ");
+ debug_putstr("Parsing ELF...\n");
phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
if (!phdrs)
@@ -289,6 +289,11 @@ static void parse_elf(void *output)
dest = (void *)(phdr->p_paddr);
#endif
memmove(dest, output + phdr->p_offset, phdr->p_filesz);
+ debug_printf(" parse_elf: [0x%010lx-0x%010lx] <=== [0x%010lx-0x%010lx]\n",
+ (unsigned long)dest,
+ (unsigned long)dest + phdr->p_filesz - 1,
+ (unsigned long)output + phdr->p_offset,
+ (unsigned long)output + phdr->p_offset + phdr->p_filesz - 1);
break;
default: /* Ignore other PT_* */ break;
}
@@ -418,6 +423,11 @@ asmlinkage __visible void *extract_kerne
error("Destination virtual address changed when not relocatable");
#endif
+ debug_printf(" decompress: [0x%010lx-0x%010lx] <=== [0x%010lx-0x%010lx]\n",
+ (unsigned long)output,
+ (unsigned long)output + output_len - 1,
+ (unsigned long)input_data,
+ (unsigned long)input_data + input_len - 1);
debug_putstr("\nDecompressing Linux... ");
__decompress(input_data, input_len, NULL, NULL, output, output_len,
NULL, error);
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [LKP] [x86/KASLR] ed9f007ee6: -- System halted
2016-06-29 20:08 ` Yinghai Lu
@ 2016-06-29 20:29 ` Huang, Ying
-1 siblings, 0 replies; 27+ messages in thread
From: Huang, Ying @ 2016-06-29 20:29 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Ye Xiaolong, LKP ML, Linux Kernel Mailing List
Hi, Yinghai,
Yinghai Lu <yinghai@kernel.org> writes:
> On Tue, Jun 28, 2016 at 12:49 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>> On Mon, Jun 27, 2016 at 10:43 PM, Ye Xiaolong <xiaolong.ye@intel.com> wrote:
>>> On Mon, Jun 27, 2016 at 11:59:37AM -0700, Yinghai Lu wrote:
>>>>output is:
>>>>
>>>>early console in setup code
>>>>early console in extract_kernel
>>>>input_data: 0x0000000008fbb276
>>>>input_len: 0x00000000018c6e00
>>>>output: 0x0000000001000000
>>>>output_len: 0x0000000009867c98
>>>>kernel_total_size: 0x0000000008769000
>>>>booted via startup_32()
>>>>Physical KASLR using RDTSC...
>>>>Virtual KASLR using RDTSC...
>>>>
>>>>Decompressing Linux...
>>>>
>>>>XZ-compressed data is corrupt
>>>>
>>>> -- System halted
>>>>
>>>>Can you apply attached debug patch and send out dmesg?
>>>
>>> There are 4 patches you attached, do you mean to apply them all based on
>>> commit ed9f007ee6? I tried and seemed they can't apply clearly on it.
>>
>
> Please check attached updated debug patches.
>
> You should apply them after ed9f007ee6 in following sequence
>
> revert_79063a7.patch
> early_console_more_2_2x.patch
> early_console_more_2_2x_add_0.patch
> early_console_more_2_2x_add_1.patch
If you could provide a git branch for that, that will be easier for us
to test and more accurate for you to get the right patch to be tested.
Best Regards,
Huang, Ying
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-06-29 20:29 ` Huang, Ying
0 siblings, 0 replies; 27+ messages in thread
From: Huang, Ying @ 2016-06-29 20:29 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 1417 bytes --]
Hi, Yinghai,
Yinghai Lu <yinghai@kernel.org> writes:
> On Tue, Jun 28, 2016 at 12:49 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>> On Mon, Jun 27, 2016 at 10:43 PM, Ye Xiaolong <xiaolong.ye@intel.com> wrote:
>>> On Mon, Jun 27, 2016 at 11:59:37AM -0700, Yinghai Lu wrote:
>>>>output is:
>>>>
>>>>early console in setup code
>>>>early console in extract_kernel
>>>>input_data: 0x0000000008fbb276
>>>>input_len: 0x00000000018c6e00
>>>>output: 0x0000000001000000
>>>>output_len: 0x0000000009867c98
>>>>kernel_total_size: 0x0000000008769000
>>>>booted via startup_32()
>>>>Physical KASLR using RDTSC...
>>>>Virtual KASLR using RDTSC...
>>>>
>>>>Decompressing Linux...
>>>>
>>>>XZ-compressed data is corrupt
>>>>
>>>> -- System halted
>>>>
>>>>Can you apply attached debug patch and send out dmesg?
>>>
>>> There are 4 patches you attached, do you mean to apply them all based on
>>> commit ed9f007ee6? I tried and seemed they can't apply clearly on it.
>>
>
> Please check attached updated debug patches.
>
> You should apply them after ed9f007ee6 in following sequence
>
> revert_79063a7.patch
> early_console_more_2_2x.patch
> early_console_more_2_2x_add_0.patch
> early_console_more_2_2x_add_1.patch
If you could provide a git branch for that, that will be easier for us
to test and more accurate for you to get the right patch to be tested.
Best Regards,
Huang, Ying
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [LKP] [x86/KASLR] ed9f007ee6: -- System halted
2016-06-29 20:29 ` Huang, Ying
@ 2016-06-30 4:49 ` Yinghai Lu
-1 siblings, 0 replies; 27+ messages in thread
From: Yinghai Lu @ 2016-06-30 4:49 UTC (permalink / raw)
To: Huang, Ying; +Cc: Ye Xiaolong, LKP ML, Linux Kernel Mailing List
On Wed, Jun 29, 2016 at 1:29 PM, Huang, Ying <ying.huang@intel.com> wrote:
> If you could provide a git branch for that, that will be easier for us
> to test and more accurate for you to get the right patch to be tested.
>
Please check
git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
for-x86-v4.8-kaslr-debug
Thanks
Yinghai
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-06-30 4:49 ` Yinghai Lu
0 siblings, 0 replies; 27+ messages in thread
From: Yinghai Lu @ 2016-06-30 4:49 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 365 bytes --]
On Wed, Jun 29, 2016 at 1:29 PM, Huang, Ying <ying.huang@intel.com> wrote:
> If you could provide a git branch for that, that will be easier for us
> to test and more accurate for you to get the right patch to be tested.
>
Please check
git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
for-x86-v4.8-kaslr-debug
Thanks
Yinghai
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [LKP] [x86/KASLR] ed9f007ee6: -- System halted
2016-06-30 4:49 ` Yinghai Lu
@ 2016-06-30 6:58 ` Ye Xiaolong
-1 siblings, 0 replies; 27+ messages in thread
From: Ye Xiaolong @ 2016-06-30 6:58 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Huang, Ying, LKP ML, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 559 bytes --]
On Wed, Jun 29, 2016 at 09:49:12PM -0700, Yinghai Lu wrote:
>On Wed, Jun 29, 2016 at 1:29 PM, Huang, Ying <ying.huang@intel.com> wrote:
>> If you could provide a git branch for that, that will be easier for us
>> to test and more accurate for you to get the right patch to be tested.
>>
>
>Please check
>
>git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
>for-x86-v4.8-kaslr-debugy
Hi, yinghai
Attached is the dmesg for the kernel which is built based on your
for-x86-v4.8-kaslr-debug branch.
Thanks,
Xiaolong
>
>Thanks
>
>Yinghai
[-- Attachment #2: dmesg-debug.xz --]
[-- Type: application/octet-stream, Size: 1192 bytes --]
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-06-30 6:58 ` Ye Xiaolong
0 siblings, 0 replies; 27+ messages in thread
From: Ye Xiaolong @ 2016-06-30 6:58 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 581 bytes --]
On Wed, Jun 29, 2016 at 09:49:12PM -0700, Yinghai Lu wrote:
>On Wed, Jun 29, 2016 at 1:29 PM, Huang, Ying <ying.huang@intel.com> wrote:
>> If you could provide a git branch for that, that will be easier for us
>> to test and more accurate for you to get the right patch to be tested.
>>
>
>Please check
>
>git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
>for-x86-v4.8-kaslr-debugy
Hi, yinghai
Attached is the dmesg for the kernel which is built based on your
for-x86-v4.8-kaslr-debug branch.
Thanks,
Xiaolong
>
>Thanks
>
>Yinghai
[-- Attachment #2: dmesg-debug.xz --]
[-- Type: application/octet-stream, Size: 1192 bytes --]
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [LKP] [x86/KASLR] ed9f007ee6: -- System halted
2016-06-30 6:58 ` Ye Xiaolong
@ 2016-07-01 0:24 ` Yinghai Lu
-1 siblings, 0 replies; 27+ messages in thread
From: Yinghai Lu @ 2016-07-01 0:24 UTC (permalink / raw)
To: Ye Xiaolong, Baoquan He, Kees Cook
Cc: Huang, Ying, LKP ML, Linux Kernel Mailing List
On Wed, Jun 29, 2016 at 11:58 PM, Ye Xiaolong <xiaolong.ye@intel.com> wrote:
> On Wed, Jun 29, 2016 at 09:49:12PM -0700, Yinghai Lu wrote:
>>On Wed, Jun 29, 2016 at 1:29 PM, Huang, Ying <ying.huang@intel.com> wrote:
>>> If you could provide a git branch for that, that will be easier for us
>>> to test and more accurate for you to get the right patch to be tested.
>>>
>>
>>Please check
>>
>>git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
>>for-x86-v4.8-kaslr-debug
>
> Hi, yinghai
>
> Attached is the dmesg for the kernel which is built based on your
> for-x86-v4.8-kaslr-debug branch.
Thanks for capturing the boot log.
early console in setup code
early console in extract_kernel
decompress_kernel:
input: [0x0008fba276-0x000a8818ed]
output: [0x0001000000-0x000a867c97] 0x09867c98: output_len
[0x0001000000-0x0009768fff] 0x08769000: run_size
[0x0001000000-0x000a867c97] 0x09867c98: output_run_size
[0x0001000000-0x000a8affff] 0x098b0000: init_size
ZO text/data: [0x000a8818ee-0x000a8affff]
ZO heap: [0x000a888400-0x000a8983ff]
VO bss/brk: [0x0009674000-0x0009768fff]
booted via startup_32()
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
new output: [0x0006600000-0x000fe67c97] 0x09867c98: output_run_size
virt_addr: 0x0024000000
decompress: [0x0006600000-0x000fe67c97] <=== [0x0008fba276-0x000a8818ed]
Decompressing Linux...
XZ-compressed data is corrupt
-- System halted
Hi Kees/Baoquan,
Looks like
commit ed9f007ee68478f6a50ec9971ade25a0129a5c0e
Author: Kees Cook <keescook@chromium.org>
Date: Wed May 25 15:45:33 2016 -0700
x86/KASLR: Extend kernel image physical address randomization to addresses l
arger than 4G
cause choose_random_location() return new output buffer
new output: [0x0006600000-0x000fe67c97] 0x09867c98: output_run_size
that is overlapped with input data.
input: [0x0008fba276-0x000a8818ed]
....-0x000a8affff] 0x098b0000: init_size
and input already is in mem_avoid.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-07-01 0:24 ` Yinghai Lu
0 siblings, 0 replies; 27+ messages in thread
From: Yinghai Lu @ 2016-07-01 0:24 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 2104 bytes --]
On Wed, Jun 29, 2016 at 11:58 PM, Ye Xiaolong <xiaolong.ye@intel.com> wrote:
> On Wed, Jun 29, 2016 at 09:49:12PM -0700, Yinghai Lu wrote:
>>On Wed, Jun 29, 2016 at 1:29 PM, Huang, Ying <ying.huang@intel.com> wrote:
>>> If you could provide a git branch for that, that will be easier for us
>>> to test and more accurate for you to get the right patch to be tested.
>>>
>>
>>Please check
>>
>>git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
>>for-x86-v4.8-kaslr-debug
>
> Hi, yinghai
>
> Attached is the dmesg for the kernel which is built based on your
> for-x86-v4.8-kaslr-debug branch.
Thanks for capturing the boot log.
early console in setup code
early console in extract_kernel
decompress_kernel:
input: [0x0008fba276-0x000a8818ed]
output: [0x0001000000-0x000a867c97] 0x09867c98: output_len
[0x0001000000-0x0009768fff] 0x08769000: run_size
[0x0001000000-0x000a867c97] 0x09867c98: output_run_size
[0x0001000000-0x000a8affff] 0x098b0000: init_size
ZO text/data: [0x000a8818ee-0x000a8affff]
ZO heap: [0x000a888400-0x000a8983ff]
VO bss/brk: [0x0009674000-0x0009768fff]
booted via startup_32()
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...
new output: [0x0006600000-0x000fe67c97] 0x09867c98: output_run_size
virt_addr: 0x0024000000
decompress: [0x0006600000-0x000fe67c97] <=== [0x0008fba276-0x000a8818ed]
Decompressing Linux...
XZ-compressed data is corrupt
-- System halted
Hi Kees/Baoquan,
Looks like
commit ed9f007ee68478f6a50ec9971ade25a0129a5c0e
Author: Kees Cook <keescook@chromium.org>
Date: Wed May 25 15:45:33 2016 -0700
x86/KASLR: Extend kernel image physical address randomization to addresses l
arger than 4G
cause choose_random_location() return new output buffer
new output: [0x0006600000-0x000fe67c97] 0x09867c98: output_run_size
that is overlapped with input data.
input: [0x0008fba276-0x000a8818ed]
....-0x000a8affff] 0x098b0000: init_size
and input already is in mem_avoid.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [LKP] [x86/KASLR] ed9f007ee6: -- System halted
2016-07-01 0:24 ` Yinghai Lu
@ 2016-07-01 4:06 ` Baoquan He
-1 siblings, 0 replies; 27+ messages in thread
From: Baoquan He @ 2016-07-01 4:06 UTC (permalink / raw)
To: Yinghai Lu
Cc: Ye Xiaolong, Kees Cook, Huang, Ying, LKP ML, Linux Kernel Mailing List
On 06/30/16 at 05:24pm, Yinghai Lu wrote:
> On Wed, Jun 29, 2016 at 11:58 PM, Ye Xiaolong <xiaolong.ye@intel.com> wrote:
> > On Wed, Jun 29, 2016 at 09:49:12PM -0700, Yinghai Lu wrote:
> >>On Wed, Jun 29, 2016 at 1:29 PM, Huang, Ying <ying.huang@intel.com> wrote:
> >>> If you could provide a git branch for that, that will be easier for us
> >>> to test and more accurate for you to get the right patch to be tested.
> >>>
> >>
> >>Please check
> >>
> >>git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
> >>for-x86-v4.8-kaslr-debug
> >
> > Hi, yinghai
> >
> > Attached is the dmesg for the kernel which is built based on your
> > for-x86-v4.8-kaslr-debug branch.
>
> Thanks for capturing the boot log.
>
> early console in setup code
> early console in extract_kernel
> decompress_kernel:
> input: [0x0008fba276-0x000a8818ed]
> output: [0x0001000000-0x000a867c97] 0x09867c98: output_len
> [0x0001000000-0x0009768fff] 0x08769000: run_size
> [0x0001000000-0x000a867c97] 0x09867c98: output_run_size
> [0x0001000000-0x000a8affff] 0x098b0000: init_size
> ZO text/data: [0x000a8818ee-0x000a8affff]
> ZO heap: [0x000a888400-0x000a8983ff]
> VO bss/brk: [0x0009674000-0x0009768fff]
> booted via startup_32()
> Physical KASLR using RDTSC...
> Virtual KASLR using RDTSC...
> new output: [0x0006600000-0x000fe67c97] 0x09867c98: output_run_size
> virt_addr: 0x0024000000
> decompress: [0x0006600000-0x000fe67c97] <=== [0x0008fba276-0x000a8818ed]
>
> Decompressing Linux...
>
> XZ-compressed data is corrupt
>
> -- System halted
>
> Hi Kees/Baoquan,
>
> Looks like
>
> commit ed9f007ee68478f6a50ec9971ade25a0129a5c0e
> Author: Kees Cook <keescook@chromium.org>
> Date: Wed May 25 15:45:33 2016 -0700
>
> x86/KASLR: Extend kernel image physical address randomization to addresses l
> arger than 4G
I know why it happened, making patch. will reply soon.
>
>
> cause choose_random_location() return new output buffer
> new output: [0x0006600000-0x000fe67c97] 0x09867c98: output_run_size
>
> that is overlapped with input data.
> input: [0x0008fba276-0x000a8818ed]
> ....-0x000a8affff] 0x098b0000: init_size
>
> and input already is in mem_avoid.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-07-01 4:06 ` Baoquan He
0 siblings, 0 replies; 27+ messages in thread
From: Baoquan He @ 2016-07-01 4:06 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 2333 bytes --]
On 06/30/16 at 05:24pm, Yinghai Lu wrote:
> On Wed, Jun 29, 2016 at 11:58 PM, Ye Xiaolong <xiaolong.ye@intel.com> wrote:
> > On Wed, Jun 29, 2016 at 09:49:12PM -0700, Yinghai Lu wrote:
> >>On Wed, Jun 29, 2016 at 1:29 PM, Huang, Ying <ying.huang@intel.com> wrote:
> >>> If you could provide a git branch for that, that will be easier for us
> >>> to test and more accurate for you to get the right patch to be tested.
> >>>
> >>
> >>Please check
> >>
> >>git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
> >>for-x86-v4.8-kaslr-debug
> >
> > Hi, yinghai
> >
> > Attached is the dmesg for the kernel which is built based on your
> > for-x86-v4.8-kaslr-debug branch.
>
> Thanks for capturing the boot log.
>
> early console in setup code
> early console in extract_kernel
> decompress_kernel:
> input: [0x0008fba276-0x000a8818ed]
> output: [0x0001000000-0x000a867c97] 0x09867c98: output_len
> [0x0001000000-0x0009768fff] 0x08769000: run_size
> [0x0001000000-0x000a867c97] 0x09867c98: output_run_size
> [0x0001000000-0x000a8affff] 0x098b0000: init_size
> ZO text/data: [0x000a8818ee-0x000a8affff]
> ZO heap: [0x000a888400-0x000a8983ff]
> VO bss/brk: [0x0009674000-0x0009768fff]
> booted via startup_32()
> Physical KASLR using RDTSC...
> Virtual KASLR using RDTSC...
> new output: [0x0006600000-0x000fe67c97] 0x09867c98: output_run_size
> virt_addr: 0x0024000000
> decompress: [0x0006600000-0x000fe67c97] <=== [0x0008fba276-0x000a8818ed]
>
> Decompressing Linux...
>
> XZ-compressed data is corrupt
>
> -- System halted
>
> Hi Kees/Baoquan,
>
> Looks like
>
> commit ed9f007ee68478f6a50ec9971ade25a0129a5c0e
> Author: Kees Cook <keescook@chromium.org>
> Date: Wed May 25 15:45:33 2016 -0700
>
> x86/KASLR: Extend kernel image physical address randomization to addresses l
> arger than 4G
I know why it happened, making patch. will reply soon.
>
>
> cause choose_random_location() return new output buffer
> new output: [0x0006600000-0x000fe67c97] 0x09867c98: output_run_size
>
> that is overlapped with input data.
> input: [0x0008fba276-0x000a8818ed]
> ....-0x000a8affff] 0x098b0000: init_size
>
> and input already is in mem_avoid.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [LKP] [x86/KASLR] ed9f007ee6: -- System halted
2016-07-01 4:06 ` Baoquan He
@ 2016-07-01 4:46 ` Baoquan He
-1 siblings, 0 replies; 27+ messages in thread
From: Baoquan He @ 2016-07-01 4:46 UTC (permalink / raw)
To: Yinghai Lu
Cc: Ye Xiaolong, Kees Cook, Huang, Ying, LKP ML, Linux Kernel Mailing List
On 07/01/16 at 12:06pm, Baoquan He wrote:
> On 06/30/16 at 05:24pm, Yinghai Lu wrote:
> > On Wed, Jun 29, 2016 at 11:58 PM, Ye Xiaolong <xiaolong.ye@intel.com> wrote:
> > > On Wed, Jun 29, 2016 at 09:49:12PM -0700, Yinghai Lu wrote:
> > >>On Wed, Jun 29, 2016 at 1:29 PM, Huang, Ying <ying.huang@intel.com> wrote:
> > >>> If you could provide a git branch for that, that will be easier for us
> > >>> to test and more accurate for you to get the right patch to be tested.
> > >>>
> > >>
> > >>Please check
> > >>
> > >>git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
> > >>for-x86-v4.8-kaslr-debug
> > >
> > > Hi, yinghai
> > >
> > > Attached is the dmesg for the kernel which is built based on your
> > > for-x86-v4.8-kaslr-debug branch.
> >
> > Thanks for capturing the boot log.
> >
> > early console in setup code
> > early console in extract_kernel
> > decompress_kernel:
> > input: [0x0008fba276-0x000a8818ed]
> > output: [0x0001000000-0x000a867c97] 0x09867c98: output_len
> > [0x0001000000-0x0009768fff] 0x08769000: run_size
> > [0x0001000000-0x000a867c97] 0x09867c98: output_run_size
> > [0x0001000000-0x000a8affff] 0x098b0000: init_size
> > ZO text/data: [0x000a8818ee-0x000a8affff]
> > ZO heap: [0x000a888400-0x000a8983ff]
> > VO bss/brk: [0x0009674000-0x0009768fff]
> > booted via startup_32()
> > Physical KASLR using RDTSC...
> > Virtual KASLR using RDTSC...
> > new output: [0x0006600000-0x000fe67c97] 0x09867c98: output_run_size
> > virt_addr: 0x0024000000
> > decompress: [0x0006600000-0x000fe67c97] <=== [0x0008fba276-0x000a8818ed]
> >
> > Decompressing Linux...
> >
> > XZ-compressed data is corrupt
> >
> > -- System halted
> >
> > Hi Kees/Baoquan,
> >
> > Looks like
> >
> > commit ed9f007ee68478f6a50ec9971ade25a0129a5c0e
> > Author: Kees Cook <keescook@chromium.org>
> > Date: Wed May 25 15:45:33 2016 -0700
> >
> > x86/KASLR: Extend kernel image physical address randomization to addresses l
> > arger than 4G
>
> I know why it happened, making patch. will reply soon.
Sorry, I didn't get it, continue checking.
>
> >
> >
> > cause choose_random_location() return new output buffer
> > new output: [0x0006600000-0x000fe67c97] 0x09867c98: output_run_size
> >
> > that is overlapped with input data.
> > input: [0x0008fba276-0x000a8818ed]
> > ....-0x000a8affff] 0x098b0000: init_size
> >
> > and input already is in mem_avoid.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-07-01 4:46 ` Baoquan He
0 siblings, 0 replies; 27+ messages in thread
From: Baoquan He @ 2016-07-01 4:46 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 2558 bytes --]
On 07/01/16 at 12:06pm, Baoquan He wrote:
> On 06/30/16 at 05:24pm, Yinghai Lu wrote:
> > On Wed, Jun 29, 2016 at 11:58 PM, Ye Xiaolong <xiaolong.ye@intel.com> wrote:
> > > On Wed, Jun 29, 2016 at 09:49:12PM -0700, Yinghai Lu wrote:
> > >>On Wed, Jun 29, 2016 at 1:29 PM, Huang, Ying <ying.huang@intel.com> wrote:
> > >>> If you could provide a git branch for that, that will be easier for us
> > >>> to test and more accurate for you to get the right patch to be tested.
> > >>>
> > >>
> > >>Please check
> > >>
> > >>git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
> > >>for-x86-v4.8-kaslr-debug
> > >
> > > Hi, yinghai
> > >
> > > Attached is the dmesg for the kernel which is built based on your
> > > for-x86-v4.8-kaslr-debug branch.
> >
> > Thanks for capturing the boot log.
> >
> > early console in setup code
> > early console in extract_kernel
> > decompress_kernel:
> > input: [0x0008fba276-0x000a8818ed]
> > output: [0x0001000000-0x000a867c97] 0x09867c98: output_len
> > [0x0001000000-0x0009768fff] 0x08769000: run_size
> > [0x0001000000-0x000a867c97] 0x09867c98: output_run_size
> > [0x0001000000-0x000a8affff] 0x098b0000: init_size
> > ZO text/data: [0x000a8818ee-0x000a8affff]
> > ZO heap: [0x000a888400-0x000a8983ff]
> > VO bss/brk: [0x0009674000-0x0009768fff]
> > booted via startup_32()
> > Physical KASLR using RDTSC...
> > Virtual KASLR using RDTSC...
> > new output: [0x0006600000-0x000fe67c97] 0x09867c98: output_run_size
> > virt_addr: 0x0024000000
> > decompress: [0x0006600000-0x000fe67c97] <=== [0x0008fba276-0x000a8818ed]
> >
> > Decompressing Linux...
> >
> > XZ-compressed data is corrupt
> >
> > -- System halted
> >
> > Hi Kees/Baoquan,
> >
> > Looks like
> >
> > commit ed9f007ee68478f6a50ec9971ade25a0129a5c0e
> > Author: Kees Cook <keescook@chromium.org>
> > Date: Wed May 25 15:45:33 2016 -0700
> >
> > x86/KASLR: Extend kernel image physical address randomization to addresses l
> > arger than 4G
>
> I know why it happened, making patch. will reply soon.
Sorry, I didn't get it, continue checking.
>
> >
> >
> > cause choose_random_location() return new output buffer
> > new output: [0x0006600000-0x000fe67c97] 0x09867c98: output_run_size
> >
> > that is overlapped with input data.
> > input: [0x0008fba276-0x000a8818ed]
> > ....-0x000a8affff] 0x098b0000: init_size
> >
> > and input already is in mem_avoid.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
2016-06-27 13:20 [x86/KASLR] ed9f007ee6: -- System halted kernel test robot
@ 2016-07-01 7:50 ` Baoquan He
2016-07-01 7:50 ` Baoquan He
1 sibling, 0 replies; 27+ messages in thread
From: Baoquan He @ 2016-07-01 7:50 UTC (permalink / raw)
To: kernel test robot
Cc: Kees Cook, lkp, tipbuild, linux-kernel, Yinghai Lu,
Thomas Gleixner, Peter Zijlstra, Linus Torvalds, Josh Poimboeuf,
H.J. Lu, H. Peter Anvin, Dmitry Vyukov, Denys Vlasenko,
Brian Gerst, Borislav Petkov, Andy Lutomirski, Andrey Ryabinin,
Andrew Morton, Ingo Molnar
Hi Xiaolong,
Could you please apply below patch and see if it works for you?
>From 46c2a9ecd11f61d952253e005bbd7dcbffa652fb Mon Sep 17 00:00:00 2001
From: Baoquan He <bhe@redhat.com>
Date: Fri, 1 Jul 2016 15:34:40 +0800
Subject: [PATCH] x86/KASLR: Fix code bug of finding earliest overlap
Signed-off-by: Baoquan He <bhe@redhat.com>
---
arch/x86/boot/compressed/kaslr.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
index 304c5c3..8e1fdf7 100644
--- a/arch/x86/boot/compressed/kaslr.c
+++ b/arch/x86/boot/compressed/kaslr.c
@@ -285,6 +285,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
if (mem_overlaps(img, &mem_avoid[i]) &&
mem_avoid[i].start < earliest) {
*overlap = mem_avoid[i];
+ earliest = overlap->start;
is_overlapping = true;
}
}
@@ -299,6 +300,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
if (mem_overlaps(img, &avoid) && (avoid.start < earliest)) {
*overlap = avoid;
+ earliest = overlap->start;
is_overlapping = true;
}
--
2.5.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-07-01 7:50 ` Baoquan He
0 siblings, 0 replies; 27+ messages in thread
From: Baoquan He @ 2016-07-01 7:50 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 1131 bytes --]
Hi Xiaolong,
Could you please apply below patch and see if it works for you?
>From 46c2a9ecd11f61d952253e005bbd7dcbffa652fb Mon Sep 17 00:00:00 2001
From: Baoquan He <bhe@redhat.com>
Date: Fri, 1 Jul 2016 15:34:40 +0800
Subject: [PATCH] x86/KASLR: Fix code bug of finding earliest overlap
Signed-off-by: Baoquan He <bhe@redhat.com>
---
arch/x86/boot/compressed/kaslr.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
index 304c5c3..8e1fdf7 100644
--- a/arch/x86/boot/compressed/kaslr.c
+++ b/arch/x86/boot/compressed/kaslr.c
@@ -285,6 +285,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
if (mem_overlaps(img, &mem_avoid[i]) &&
mem_avoid[i].start < earliest) {
*overlap = mem_avoid[i];
+ earliest = overlap->start;
is_overlapping = true;
}
}
@@ -299,6 +300,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
if (mem_overlaps(img, &avoid) && (avoid.start < earliest)) {
*overlap = avoid;
+ earliest = overlap->start;
is_overlapping = true;
}
--
2.5.5
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
2016-07-01 7:50 ` Baoquan He
@ 2016-07-01 12:16 ` Ye Xiaolong
-1 siblings, 0 replies; 27+ messages in thread
From: Ye Xiaolong @ 2016-07-01 12:16 UTC (permalink / raw)
To: Baoquan He
Cc: Kees Cook, lkp, tipbuild, linux-kernel, Yinghai Lu,
Thomas Gleixner, Peter Zijlstra, Linus Torvalds, Josh Poimboeuf,
H.J. Lu, H. Peter Anvin, Dmitry Vyukov, Denys Vlasenko,
Brian Gerst, Borislav Petkov, Andy Lutomirski, Andrey Ryabinin,
Andrew Morton, Ingo Molnar
[-- Attachment #1: Type: text/plain, Size: 1311 bytes --]
On Fri, Jul 01, 2016 at 03:50:32PM +0800, Baoquan He wrote:
>Hi Xiaolong,
>
>Could you please apply below patch and see if it works for you?
Hi, Baoquan,
Please check enclosed dmesg after apply your fix patch, does it meet
your expectation?
Thanks,
Xiaolong
>
>From 46c2a9ecd11f61d952253e005bbd7dcbffa652fb Mon Sep 17 00:00:00 2001
>From: Baoquan He <bhe@redhat.com>
>Date: Fri, 1 Jul 2016 15:34:40 +0800
>Subject: [PATCH] x86/KASLR: Fix code bug of finding earliest overlap
>
>Signed-off-by: Baoquan He <bhe@redhat.com>
>---
> arch/x86/boot/compressed/kaslr.c | 2 ++
> 1 file changed, 2 insertions(+)
>
>diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
>index 304c5c3..8e1fdf7 100644
>--- a/arch/x86/boot/compressed/kaslr.c
>+++ b/arch/x86/boot/compressed/kaslr.c
>@@ -285,6 +285,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
> if (mem_overlaps(img, &mem_avoid[i]) &&
> mem_avoid[i].start < earliest) {
> *overlap = mem_avoid[i];
>+ earliest = overlap->start;
> is_overlapping = true;
> }
> }
>@@ -299,6 +300,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
>
> if (mem_overlaps(img, &avoid) && (avoid.start < earliest)) {
> *overlap = avoid;
>+ earliest = overlap->start;
> is_overlapping = true;
> }
>
>--
>2.5.5
>
[-- Attachment #2: dmesg.xz --]
[-- Type: application/octet-stream, Size: 21712 bytes --]
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-07-01 12:16 ` Ye Xiaolong
0 siblings, 0 replies; 27+ messages in thread
From: Ye Xiaolong @ 2016-07-01 12:16 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 1358 bytes --]
On Fri, Jul 01, 2016 at 03:50:32PM +0800, Baoquan He wrote:
>Hi Xiaolong,
>
>Could you please apply below patch and see if it works for you?
Hi, Baoquan,
Please check enclosed dmesg after apply your fix patch, does it meet
your expectation?
Thanks,
Xiaolong
>
>From 46c2a9ecd11f61d952253e005bbd7dcbffa652fb Mon Sep 17 00:00:00 2001
>From: Baoquan He <bhe@redhat.com>
>Date: Fri, 1 Jul 2016 15:34:40 +0800
>Subject: [PATCH] x86/KASLR: Fix code bug of finding earliest overlap
>
>Signed-off-by: Baoquan He <bhe@redhat.com>
>---
> arch/x86/boot/compressed/kaslr.c | 2 ++
> 1 file changed, 2 insertions(+)
>
>diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
>index 304c5c3..8e1fdf7 100644
>--- a/arch/x86/boot/compressed/kaslr.c
>+++ b/arch/x86/boot/compressed/kaslr.c
>@@ -285,6 +285,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
> if (mem_overlaps(img, &mem_avoid[i]) &&
> mem_avoid[i].start < earliest) {
> *overlap = mem_avoid[i];
>+ earliest = overlap->start;
> is_overlapping = true;
> }
> }
>@@ -299,6 +300,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
>
> if (mem_overlaps(img, &avoid) && (avoid.start < earliest)) {
> *overlap = avoid;
>+ earliest = overlap->start;
> is_overlapping = true;
> }
>
>--
>2.5.5
>
[-- Attachment #2: dmesg.xz --]
[-- Type: application/octet-stream, Size: 21712 bytes --]
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
2016-07-01 12:16 ` Ye Xiaolong
@ 2016-07-01 13:14 ` Baoquan He
-1 siblings, 0 replies; 27+ messages in thread
From: Baoquan He @ 2016-07-01 13:14 UTC (permalink / raw)
To: Ye Xiaolong
Cc: Kees Cook, lkp, tipbuild, linux-kernel, Yinghai Lu,
Thomas Gleixner, Peter Zijlstra, Linus Torvalds, Josh Poimboeuf,
H.J. Lu, H. Peter Anvin, Dmitry Vyukov, Denys Vlasenko,
Brian Gerst, Borislav Petkov, Andy Lutomirski, Andrey Ryabinin,
Andrew Morton, Ingo Molnar
[-- Attachment #1: Type: text/plain, Size: 1849 bytes --]
On 07/01/16 at 08:16pm, Ye Xiaolong wrote:
> On Fri, Jul 01, 2016 at 03:50:32PM +0800, Baoquan He wrote:
> >Hi Xiaolong,
> >
> >Could you please apply below patch and see if it works for you?
>
> Hi, Baoquan,
>
> Please check enclosed dmesg after apply your fix patch, does it meet
> your expectation?
It works, but didn't get a random phy addr. I am a little worried. I
guess your system has a very small physical memory space. Could you
apply attached patch on top of fix patch and Yinghai's debug patch and
paste the result? I want to check the physical memory and mem_avoid
region to make sure it.
Or if you can paste /proc/iomem I can have a quick check, then you don't
need to run the patch.
>
> Thanks,
> Xiaolong
>
> >
> >From 46c2a9ecd11f61d952253e005bbd7dcbffa652fb Mon Sep 17 00:00:00 2001
> >From: Baoquan He <bhe@redhat.com>
> >Date: Fri, 1 Jul 2016 15:34:40 +0800
> >Subject: [PATCH] x86/KASLR: Fix code bug of finding earliest overlap
> >
> >Signed-off-by: Baoquan He <bhe@redhat.com>
> >---
> > arch/x86/boot/compressed/kaslr.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> >diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
> >index 304c5c3..8e1fdf7 100644
> >--- a/arch/x86/boot/compressed/kaslr.c
> >+++ b/arch/x86/boot/compressed/kaslr.c
> >@@ -285,6 +285,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
> > if (mem_overlaps(img, &mem_avoid[i]) &&
> > mem_avoid[i].start < earliest) {
> > *overlap = mem_avoid[i];
> >+ earliest = overlap->start;
> > is_overlapping = true;
> > }
> > }
> >@@ -299,6 +300,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
> >
> > if (mem_overlaps(img, &avoid) && (avoid.start < earliest)) {
> > *overlap = avoid;
> >+ earliest = overlap->start;
> > is_overlapping = true;
> > }
> >
> >--
> >2.5.5
> >
[-- Attachment #2: e820_avoid_printing.patch --]
[-- Type: text/plain, Size: 1305 bytes --]
diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
index 8e1fdf7..f2bd558 100644
--- a/arch/x86/boot/compressed/kaslr.c
+++ b/arch/x86/boot/compressed/kaslr.c
@@ -260,6 +260,12 @@ static void mem_avoid_init(unsigned long input, unsigned long input_size,
mem_avoid[MEM_AVOID_BOOTPARAMS].size = sizeof(*boot_params);
add_identity_map(mem_avoid[MEM_AVOID_BOOTPARAMS].start,
mem_avoid[MEM_AVOID_BOOTPARAMS].size);
+ for(int i=0; i<MEM_AVOID_MAX; i++)
+ debug_printf(" mem_avoid[%d]: [0x%010lx-0x%010lx] 0x%08lx: size\n",
+ i,
+ (unsigned long)mem_avoid[i].start,
+ (unsigned long) mem_avoid[i].start + mem_avoid[i].size - 1,
+ (unsigned long)mem_avoid[i].size);
/* We don't need to set a mapping for setup_data. */
@@ -376,6 +382,11 @@ static void process_e820_entry(struct e820entry *entry,
if (entry->type != E820_RAM)
return;
+ debug_printf(" e820 entry: [0x%010lx-0x%010lx] 0x%08lx: size\n",
+ (unsigned long)entry->addr,
+ (unsigned long)entry->addr + entry->size - 1,
+ (unsigned long)entry->size);
+
/* On 32-bit, ignore entries entirely above our maximum. */
if (IS_ENABLED(CONFIG_X86_32) && entry->addr >= KERNEL_IMAGE_SIZE)
return;
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-07-01 13:14 ` Baoquan He
0 siblings, 0 replies; 27+ messages in thread
From: Baoquan He @ 2016-07-01 13:14 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 1909 bytes --]
On 07/01/16 at 08:16pm, Ye Xiaolong wrote:
> On Fri, Jul 01, 2016 at 03:50:32PM +0800, Baoquan He wrote:
> >Hi Xiaolong,
> >
> >Could you please apply below patch and see if it works for you?
>
> Hi, Baoquan,
>
> Please check enclosed dmesg after apply your fix patch, does it meet
> your expectation?
It works, but didn't get a random phy addr. I am a little worried. I
guess your system has a very small physical memory space. Could you
apply attached patch on top of fix patch and Yinghai's debug patch and
paste the result? I want to check the physical memory and mem_avoid
region to make sure it.
Or if you can paste /proc/iomem I can have a quick check, then you don't
need to run the patch.
>
> Thanks,
> Xiaolong
>
> >
> >From 46c2a9ecd11f61d952253e005bbd7dcbffa652fb Mon Sep 17 00:00:00 2001
> >From: Baoquan He <bhe@redhat.com>
> >Date: Fri, 1 Jul 2016 15:34:40 +0800
> >Subject: [PATCH] x86/KASLR: Fix code bug of finding earliest overlap
> >
> >Signed-off-by: Baoquan He <bhe@redhat.com>
> >---
> > arch/x86/boot/compressed/kaslr.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> >diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
> >index 304c5c3..8e1fdf7 100644
> >--- a/arch/x86/boot/compressed/kaslr.c
> >+++ b/arch/x86/boot/compressed/kaslr.c
> >@@ -285,6 +285,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
> > if (mem_overlaps(img, &mem_avoid[i]) &&
> > mem_avoid[i].start < earliest) {
> > *overlap = mem_avoid[i];
> >+ earliest = overlap->start;
> > is_overlapping = true;
> > }
> > }
> >@@ -299,6 +300,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
> >
> > if (mem_overlaps(img, &avoid) && (avoid.start < earliest)) {
> > *overlap = avoid;
> >+ earliest = overlap->start;
> > is_overlapping = true;
> > }
> >
> >--
> >2.5.5
> >
[-- Attachment #2: e820_avoid_printing.patch --]
[-- Type: text/plain, Size: 1305 bytes --]
diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
index 8e1fdf7..f2bd558 100644
--- a/arch/x86/boot/compressed/kaslr.c
+++ b/arch/x86/boot/compressed/kaslr.c
@@ -260,6 +260,12 @@ static void mem_avoid_init(unsigned long input, unsigned long input_size,
mem_avoid[MEM_AVOID_BOOTPARAMS].size = sizeof(*boot_params);
add_identity_map(mem_avoid[MEM_AVOID_BOOTPARAMS].start,
mem_avoid[MEM_AVOID_BOOTPARAMS].size);
+ for(int i=0; i<MEM_AVOID_MAX; i++)
+ debug_printf(" mem_avoid[%d]: [0x%010lx-0x%010lx] 0x%08lx: size\n",
+ i,
+ (unsigned long)mem_avoid[i].start,
+ (unsigned long) mem_avoid[i].start + mem_avoid[i].size - 1,
+ (unsigned long)mem_avoid[i].size);
/* We don't need to set a mapping for setup_data. */
@@ -376,6 +382,11 @@ static void process_e820_entry(struct e820entry *entry,
if (entry->type != E820_RAM)
return;
+ debug_printf(" e820 entry: [0x%010lx-0x%010lx] 0x%08lx: size\n",
+ (unsigned long)entry->addr,
+ (unsigned long)entry->addr + entry->size - 1,
+ (unsigned long)entry->size);
+
/* On 32-bit, ignore entries entirely above our maximum. */
if (IS_ENABLED(CONFIG_X86_32) && entry->addr >= KERNEL_IMAGE_SIZE)
return;
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
2016-07-01 13:14 ` Baoquan He
@ 2016-07-01 13:25 ` Baoquan He
-1 siblings, 0 replies; 27+ messages in thread
From: Baoquan He @ 2016-07-01 13:25 UTC (permalink / raw)
To: Ye Xiaolong
Cc: Kees Cook, lkp, tipbuild, linux-kernel, Yinghai Lu,
Thomas Gleixner, Peter Zijlstra, Linus Torvalds, Josh Poimboeuf,
H.J. Lu, H. Peter Anvin, Dmitry Vyukov, Denys Vlasenko,
Brian Gerst, Borislav Petkov, Andy Lutomirski, Andrey Ryabinin,
Andrew Morton, Ingo Molnar
On 07/01/16 at 09:14pm, Baoquan He wrote:
> On 07/01/16 at 08:16pm, Ye Xiaolong wrote:
> > On Fri, Jul 01, 2016 at 03:50:32PM +0800, Baoquan He wrote:
> > >Hi Xiaolong,
> > >
> > >Could you please apply below patch and see if it works for you?
> >
> > Hi, Baoquan,
> >
> > Please check enclosed dmesg after apply your fix patch, does it meet
> > your expectation?
>
> It works, but didn't get a random phy addr. I am a little worried. I
> guess your system has a very small physical memory space. Could you
> apply attached patch on top of fix patch and Yinghai's debug patch and
> paste the result? I want to check the physical memory and mem_avoid
> region to make sure it.
>
> Or if you can paste /proc/iomem I can have a quick check, then you don't
> need to run the patch.
Sorry, Xiaolong, I didn't notice you have pasted the boot log. It's OK
on your system. The fix is good. Since you only make physical memory
320M on that kvm, and the kernel run size need about 152M. It can't
search another suitable position.
I think the fix is good. By the way, are there other test systems, like
with different size of physical memory?
Thanks
Baoquan
>
> >
> > Thanks,
> > Xiaolong
> >
> > >
> > >From 46c2a9ecd11f61d952253e005bbd7dcbffa652fb Mon Sep 17 00:00:00 2001
> > >From: Baoquan He <bhe@redhat.com>
> > >Date: Fri, 1 Jul 2016 15:34:40 +0800
> > >Subject: [PATCH] x86/KASLR: Fix code bug of finding earliest overlap
> > >
> > >Signed-off-by: Baoquan He <bhe@redhat.com>
> > >---
> > > arch/x86/boot/compressed/kaslr.c | 2 ++
> > > 1 file changed, 2 insertions(+)
> > >
> > >diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
> > >index 304c5c3..8e1fdf7 100644
> > >--- a/arch/x86/boot/compressed/kaslr.c
> > >+++ b/arch/x86/boot/compressed/kaslr.c
> > >@@ -285,6 +285,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
> > > if (mem_overlaps(img, &mem_avoid[i]) &&
> > > mem_avoid[i].start < earliest) {
> > > *overlap = mem_avoid[i];
> > >+ earliest = overlap->start;
> > > is_overlapping = true;
> > > }
> > > }
> > >@@ -299,6 +300,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
> > >
> > > if (mem_overlaps(img, &avoid) && (avoid.start < earliest)) {
> > > *overlap = avoid;
> > >+ earliest = overlap->start;
> > > is_overlapping = true;
> > > }
> > >
> > >--
> > >2.5.5
> > >
>
>
> diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
> index 8e1fdf7..f2bd558 100644
> --- a/arch/x86/boot/compressed/kaslr.c
> +++ b/arch/x86/boot/compressed/kaslr.c
> @@ -260,6 +260,12 @@ static void mem_avoid_init(unsigned long input, unsigned long input_size,
> mem_avoid[MEM_AVOID_BOOTPARAMS].size = sizeof(*boot_params);
> add_identity_map(mem_avoid[MEM_AVOID_BOOTPARAMS].start,
> mem_avoid[MEM_AVOID_BOOTPARAMS].size);
> + for(int i=0; i<MEM_AVOID_MAX; i++)
> + debug_printf(" mem_avoid[%d]: [0x%010lx-0x%010lx] 0x%08lx: size\n",
> + i,
> + (unsigned long)mem_avoid[i].start,
> + (unsigned long) mem_avoid[i].start + mem_avoid[i].size - 1,
> + (unsigned long)mem_avoid[i].size);
>
> /* We don't need to set a mapping for setup_data. */
>
> @@ -376,6 +382,11 @@ static void process_e820_entry(struct e820entry *entry,
> if (entry->type != E820_RAM)
> return;
>
> + debug_printf(" e820 entry: [0x%010lx-0x%010lx] 0x%08lx: size\n",
> + (unsigned long)entry->addr,
> + (unsigned long)entry->addr + entry->size - 1,
> + (unsigned long)entry->size);
> +
> /* On 32-bit, ignore entries entirely above our maximum. */
> if (IS_ENABLED(CONFIG_X86_32) && entry->addr >= KERNEL_IMAGE_SIZE)
> return;
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [x86/KASLR] ed9f007ee6: -- System halted
@ 2016-07-01 13:25 ` Baoquan He
0 siblings, 0 replies; 27+ messages in thread
From: Baoquan He @ 2016-07-01 13:25 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 3853 bytes --]
On 07/01/16 at 09:14pm, Baoquan He wrote:
> On 07/01/16 at 08:16pm, Ye Xiaolong wrote:
> > On Fri, Jul 01, 2016 at 03:50:32PM +0800, Baoquan He wrote:
> > >Hi Xiaolong,
> > >
> > >Could you please apply below patch and see if it works for you?
> >
> > Hi, Baoquan,
> >
> > Please check enclosed dmesg after apply your fix patch, does it meet
> > your expectation?
>
> It works, but didn't get a random phy addr. I am a little worried. I
> guess your system has a very small physical memory space. Could you
> apply attached patch on top of fix patch and Yinghai's debug patch and
> paste the result? I want to check the physical memory and mem_avoid
> region to make sure it.
>
> Or if you can paste /proc/iomem I can have a quick check, then you don't
> need to run the patch.
Sorry, Xiaolong, I didn't notice you have pasted the boot log. It's OK
on your system. The fix is good. Since you only make physical memory
320M on that kvm, and the kernel run size need about 152M. It can't
search another suitable position.
I think the fix is good. By the way, are there other test systems, like
with different size of physical memory?
Thanks
Baoquan
>
> >
> > Thanks,
> > Xiaolong
> >
> > >
> > >From 46c2a9ecd11f61d952253e005bbd7dcbffa652fb Mon Sep 17 00:00:00 2001
> > >From: Baoquan He <bhe@redhat.com>
> > >Date: Fri, 1 Jul 2016 15:34:40 +0800
> > >Subject: [PATCH] x86/KASLR: Fix code bug of finding earliest overlap
> > >
> > >Signed-off-by: Baoquan He <bhe@redhat.com>
> > >---
> > > arch/x86/boot/compressed/kaslr.c | 2 ++
> > > 1 file changed, 2 insertions(+)
> > >
> > >diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
> > >index 304c5c3..8e1fdf7 100644
> > >--- a/arch/x86/boot/compressed/kaslr.c
> > >+++ b/arch/x86/boot/compressed/kaslr.c
> > >@@ -285,6 +285,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
> > > if (mem_overlaps(img, &mem_avoid[i]) &&
> > > mem_avoid[i].start < earliest) {
> > > *overlap = mem_avoid[i];
> > >+ earliest = overlap->start;
> > > is_overlapping = true;
> > > }
> > > }
> > >@@ -299,6 +300,7 @@ static bool mem_avoid_overlap(struct mem_vector *img,
> > >
> > > if (mem_overlaps(img, &avoid) && (avoid.start < earliest)) {
> > > *overlap = avoid;
> > >+ earliest = overlap->start;
> > > is_overlapping = true;
> > > }
> > >
> > >--
> > >2.5.5
> > >
>
>
> diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
> index 8e1fdf7..f2bd558 100644
> --- a/arch/x86/boot/compressed/kaslr.c
> +++ b/arch/x86/boot/compressed/kaslr.c
> @@ -260,6 +260,12 @@ static void mem_avoid_init(unsigned long input, unsigned long input_size,
> mem_avoid[MEM_AVOID_BOOTPARAMS].size = sizeof(*boot_params);
> add_identity_map(mem_avoid[MEM_AVOID_BOOTPARAMS].start,
> mem_avoid[MEM_AVOID_BOOTPARAMS].size);
> + for(int i=0; i<MEM_AVOID_MAX; i++)
> + debug_printf(" mem_avoid[%d]: [0x%010lx-0x%010lx] 0x%08lx: size\n",
> + i,
> + (unsigned long)mem_avoid[i].start,
> + (unsigned long) mem_avoid[i].start + mem_avoid[i].size - 1,
> + (unsigned long)mem_avoid[i].size);
>
> /* We don't need to set a mapping for setup_data. */
>
> @@ -376,6 +382,11 @@ static void process_e820_entry(struct e820entry *entry,
> if (entry->type != E820_RAM)
> return;
>
> + debug_printf(" e820 entry: [0x%010lx-0x%010lx] 0x%08lx: size\n",
> + (unsigned long)entry->addr,
> + (unsigned long)entry->addr + entry->size - 1,
> + (unsigned long)entry->size);
> +
> /* On 32-bit, ignore entries entirely above our maximum. */
> if (IS_ENABLED(CONFIG_X86_32) && entry->addr >= KERNEL_IMAGE_SIZE)
> return;
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2016-07-01 13:25 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-27 13:20 [x86/KASLR] ed9f007ee6: -- System halted kernel test robot
2016-06-27 18:59 ` Yinghai Lu
2016-06-27 18:59 ` Yinghai Lu
2016-06-28 5:43 ` Ye Xiaolong
2016-06-28 19:49 ` Yinghai Lu
2016-06-29 20:08 ` Yinghai Lu
2016-06-29 20:08 ` Yinghai Lu
2016-06-29 20:29 ` [LKP] " Huang, Ying
2016-06-29 20:29 ` Huang, Ying
2016-06-30 4:49 ` [LKP] " Yinghai Lu
2016-06-30 4:49 ` Yinghai Lu
2016-06-30 6:58 ` [LKP] " Ye Xiaolong
2016-06-30 6:58 ` Ye Xiaolong
2016-07-01 0:24 ` [LKP] " Yinghai Lu
2016-07-01 0:24 ` Yinghai Lu
2016-07-01 4:06 ` [LKP] " Baoquan He
2016-07-01 4:06 ` Baoquan He
2016-07-01 4:46 ` [LKP] " Baoquan He
2016-07-01 4:46 ` Baoquan He
2016-07-01 7:50 ` Baoquan He
2016-07-01 7:50 ` Baoquan He
2016-07-01 12:16 ` Ye Xiaolong
2016-07-01 12:16 ` Ye Xiaolong
2016-07-01 13:14 ` Baoquan He
2016-07-01 13:14 ` Baoquan He
2016-07-01 13:25 ` Baoquan He
2016-07-01 13:25 ` Baoquan He
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.