[PATCH 0/7] FSL's LS2088A platform support

[PATCH 0/7] FSL's LS2088A platform support

[Abhimanyu Saini]

This patchset adds support for the QorIQ LS2088A SoC, which
is nearly identical to the LS2080A except it is based on A72
CPUs.

Supported targets are QDS and RDB boards.  The updates
include binding updates, compatible string update to the 
clock drivers, and the ls2088a device dtsi and dts files.


Abhimanyu Saini (7):
  dt-bindings: arm: Update bindings for LS2088A targets
  dt-bindings: pci: Update bindings for LS2088A
  dt-bindings: mtd: fsl-quadspi: Update qspi bindings for LS2088A
  dt-bindings: spi: Update dspi bindings for LS2088A
  dt-bindings: gpio: Update gpio bindings for LS2088A
  drivers: clk: qoriq: Add ls2088a key to clk OF match table
  arm64: Add DTS support for FSL's LS2088A SoC

Based off: v4.7-rc1

 Documentation/devicetree/bindings/arm/fsl.txt      |   7 +
 .../devicetree/bindings/gpio/gpio-mpc8xxx.txt      |   2 +-
 .../devicetree/bindings/mtd/fsl-quadspi.txt        |   4 +-
 .../devicetree/bindings/pci/layerscape-pci.txt     |   5 +-
 .../devicetree/bindings/spi/spi-fsl-dspi.txt       |   3 +-
 arch/arm64/boot/dts/freescale/Makefile             |   2 +
 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts  | 211 +++++++
 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts  | 166 +++++
 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi     | 703 +++++++++++++++++++++
 drivers/clk/clk-qoriq.c                            |  12 +
 10 files changed, 1108 insertions(+), 7 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/7] dt-bindings: arm: Update bindings for LS2088A targets

[Abhimanyu Saini]

Add compatible strings for LS2088A RDB and QDS board.

Signed-off-by: Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/fsl.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index dbbc095..4dfae81 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -151,3 +151,10 @@ LS2080A ARMv8 based RDB Board
 Required root node properties:
     - compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
 
+LS2088A ARMv8 based QDS Board
+Required root node properties:
+    - compatible = "fsl,ls2088a-qds", "fsl,ls2088a"
+
+LS2088A ARMv8 based RDB Board
+Required root node properties:
+    - compatible = "fsl,ls2088a-rdb", "fsl,ls2088a"
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/7] dt-bindings: pci: Update bindings for LS2088A

[Abhimanyu Saini]

Signed-off-by: Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
---
 Documentation/devicetree/bindings/pci/layerscape-pci.txt | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 41e9f55..ff32669 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -12,9 +12,8 @@ which can allow determining the underlying DesignWare PCIe controller version
 information.
 
 Required properties:
-- compatible: should contain the platform identifier such as:
-        "fsl,ls1021a-pcie", "snps,dw-pcie"
-        "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
+- compatible: should be: "fsl,<chip>-pcie", "snps,dw-pcie".
+	<chip> can be: ls1021a, ls2080a, ls2088a
 - reg: base addresses and lengths of the PCIe controller
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 3/7] dt-bindings: mtd: fsl-quadspi: Update qspi bindings for LS2088A

[Abhimanyu Saini]

Signed-off-by: Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
---
 Documentation/devicetree/bindings/mtd/fsl-quadspi.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
index c34aa6f..2f95a8f 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -5,8 +5,8 @@ Required properties:
 		 "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
 		 "fsl,ls1021a-qspi"
 		 or
-		 "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi",
-		 "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi"
+		 "fsl,<chip>-qspi", "fsl,ls1021a-qspi"
+		 <chip> can be: ls2080a, ls2088a, ls1043a
   - reg : the first contains the register location and length,
           the second contains the memory mapping address and length
   - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 4/7] dt-bindings: spi: Update dspi bindings for LS2088A

[Abhimanyu Saini]

Signed-off-by: Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
---
 Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index ff5893d..0870660 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -4,7 +4,8 @@ Required properties:
 - compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi",
 		"fsl,ls2085a-dspi"
 		or
-		"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"
+		"fsl,<chip>-dspi" followed by "fsl,ls2085a-dspi",
+		<chip> can be: ls2080a, ls2088a
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
 - clocks: from common clock binding: handle to dspi clock.
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 5/7] dt-bindings: gpio: Update gpio bindings for LS2088A

[Abhimanyu Saini]

---
 Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
index 4b6cc63..9b1be49 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
@@ -4,7 +4,7 @@ Required properties:
 - compatible : Should be "fsl,<soc>-gpio"
   The following <soc>s are known to be supported:
 	mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq,
-	ls1021a, ls1043a, ls2080a.
+	ls1021a, ls1043a, ls2080a, ls2088a.
 - reg : Address and length of the register set for the device
 - interrupts : Should be the port interrupt shared by all 32 pins.
 - #gpio-cells : Should be two.  The first cell is the pin number and
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 6/7] drivers: clk: qoriq: Add ls2088a key to clk OF match table

[Abhimanyu Saini]

Signed-off-by: Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
---
 drivers/clk/clk-qoriq.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 58566a17..2a5bbc5 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -500,6 +500,17 @@ static const struct clockgen_chipinfo chipinfo[] = {
 		.flags = CG_VER3 | CG_LITTLE_ENDIAN,
 	},
 	{
+		.compat = "fsl,ls2088a-clockgen",
+		.cmux_groups = {
+			&clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+		},
+		.cmux_to_group = {
+			0, 0, 1, 1, -1
+		},
+		.pll_mask = 0x37,
+		.flags = CG_VER3 | CG_LITTLE_ENDIAN,
+	},
+	{
 		.compat = "fsl,p2041-clockgen",
 		.guts_compat = "fsl,qoriq-device-config-1.0",
 		.init_periph = p2041_init_periph,
@@ -1269,6 +1280,7 @@ CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls2088a, "fsl,ls2088a-clockgen", clockgen_init);
 
 /* Legacy nodes */
 CLK_OF_DECLARE(qoriq_sysclk_1, "fsl,qoriq-sysclk-1.0", sysclk_init);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 7/7] arm64: Add DTS support for FSL's LS2088A SoC

[Abhimanyu Saini]

This patch adds the device tree support for FSL LS2088A SoC based on
ARMv8 architecture.

Following levels of DTSI/DTS files have been created for the LS2088A
SoC family:

     - fsl-ls2088a.dtsi:
            DTS-Include file for FSL LS2088A SoC.

     - fsl-ls2088a-qds.dts:
            DTS file for FSL LS2088A QDS board.

     - fsl-ls2088a-rdb.dts:
            DTS file for FSL LS2088A RDB board.

Signed-off-by: Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
---
 arch/arm64/boot/dts/freescale/Makefile            |   2 +
 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts | 211 +++++++
 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 166 +++++
 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi    | 703 ++++++++++++++++++++++
 4 files changed, 1082 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 1b7783d..60ff96a 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -3,6 +3,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
  
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
new file mode 100644
index 0000000..2b8d9f3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -0,0 +1,211 @@
+/*
+ * Device Tree file for Freescale LS2088A QDS Board.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl-ls2088a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2088A QDS Board";
+	compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+		  0x2 0x0 0x5 0x30000000 0x00010000
+		  0x3 0x0 0x5 0x20000000 0x00010000>;
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+	     compatible = "fsl,ifc-nand";
+	     reg = <0x2 0x0 0x10000>;
+	};
+
+	cpld@3,0 {
+	     reg = <0x3 0x0 0x10000>;
+	     compatible = "fsl,ls2088aqds-fpga", "fsl,fpga-qixis";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&dspi {
+	status = "okay";
+	dflash0: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+	dflash1: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <1>;
+	};
+	dflash2: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash0: s25fl256s1@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+	flash2: s25fl256s1@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
new file mode 100644
index 0000000..6d403bc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -0,0 +1,166 @@
+/*
+ * Device Tree file for Freescale LS2088A RDB Board.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl-ls2088a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2088A RDB Board";
+	compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+		  0x2 0x0 0x5 0x30000000 0x00010000
+		  0x3 0x0 0x5 0x20000000 0x00010000>;
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+	     compatible = "fsl,ifc-nand";
+	     reg = <0x2 0x0 0x10000>;
+	};
+
+	cpld@3,0 {
+	     reg = <0x3 0x0 0x10000>;
+	     compatible = "fsl,ls2088aqds-fpga", "fsl,fpga-qixis";
+	};
+
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547@75 {
+		compatible = "nxp,pca9547";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x01>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&dspi {
+	status = "okay";
+	dflash0: n25q512a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+};
+
+&qspi {
+	status = "disabled";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
new file mode 100644
index 0000000..687ab5a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -0,0 +1,703 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-2088A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	compatible = "fsl,ls2088a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			clocks = <&clockgen 1 2>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x201>;
+			clocks = <&clockgen 1 2>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x300>;
+			clocks = <&clockgen 1 3>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x301>;
+			clocks = <&clockgen 1 3>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+		};
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+			<0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
+			<0x0 0x0c0c0000 0 0x2000>, /* GICC */
+			<0x0 0x0c0d0000 0 0x1000>, /* GICH */
+			<0x0 0x0c0e0000 0 0x20000>; /* GICV */
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+
+		its: gic-its@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x6020000 0 0x20000>;
+		};
+	};
+
+	reboot {
+		compatible ="syscon-reboot";
+		regmap = <&rstcr>;
+		offset = <0x0>;
+		mask = <0x2>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 0x8>, /* Virtual PPI, active-low */
+			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rstcr: syscon@1e60000 {
+			compatible = "fsl,ls2088a-rstcr", "fsl,ls2080a-rstcr",
+				     "syscon";
+			reg = <0x0 0x1e60000 0x0 0x4>;
+		};
+
+		clockgen: clocking@1300000 {
+			compatible = "fsl,ls2088a-clockgen";
+			reg = <0 0x1300000 0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		serial0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0500 0x0 0x100>;
+			clocks = <&clockgen 4 3>;
+			interrupts = <0 32 0x4>; /* Level high type */
+		};
+
+		serial1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0600 0x0 0x100>;
+			clocks = <&clockgen 4 3>;
+			interrupts = <0 32 0x4>; /* Level high type */
+		};
+
+		cluster1_core0_watchdog: wdt@c000000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc000000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster1_core1_watchdog: wdt@c010000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc010000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster2_core0_watchdog: wdt@c100000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc100000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster2_core1_watchdog: wdt@c110000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc110000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster3_core0_watchdog: wdt@c200000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc200000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster3_core1_watchdog: wdt@c210000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc210000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster4_core0_watchdog: wdt@c300000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc300000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster4_core1_watchdog: wdt@c310000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc310000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		fsl_mc: fsl-mc@80c000000 {
+			compatible = "fsl,qoriq-mc";
+			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+			msi-parent = <&its>;
+			#address-cells = <3>;
+			#size-cells = <1>;
+
+			/*
+			 * Region type 0x0 - MC portals
+			 * Region type 0x1 - QBMAN portals
+			 */
+			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+			/*
+			 * Define the maximum number of MACs present on the SoC.
+			 */
+			dpmacs {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dpmac1: dpmac@1 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x1>;
+				};
+
+				dpmac2: dpmac@2 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x2>;
+				};
+
+				dpmac3: dpmac@3 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x3>;
+				};
+
+				dpmac4: dpmac@4 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x4>;
+				};
+
+				dpmac5: dpmac@5 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x5>;
+				};
+
+				dpmac6: dpmac@6 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x6>;
+				};
+
+				dpmac7: dpmac@7 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x7>;
+				};
+
+				dpmac8: dpmac@8 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x8>;
+				};
+
+				dpmac9: dpmac@9 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x9>;
+				};
+
+				dpmac10: dpmac@a {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xa>;
+				};
+
+				dpmac11: dpmac@b {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xb>;
+				};
+
+				dpmac12: dpmac@c {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xc>;
+				};
+
+				dpmac13: dpmac@d {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xd>;
+				};
+
+				dpmac14: dpmac@e {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xe>;
+				};
+
+				dpmac15: dpmac@f {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xf>;
+				};
+
+				dpmac16: dpmac@10 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x10>;
+				};
+			};
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#global-interrupts = <12>;
+			interrupts = <0 13 4>, /* global secure fault */
+				     <0 14 4>, /* combined secure interrupt */
+				     <0 15 4>, /* global non-secure fault */
+				     <0 16 4>, /* combined non-secure interrupt */
+				/* performance counter interrupts 0-7 */
+				     <0 211 4>, <0 212 4>,
+				     <0 213 4>, <0 214 4>,
+				     <0 215 4>, <0 216 4>,
+				     <0 217 4>, <0 218 4>,
+				/* per context interrupt, 64 interrupts */
+				     <0 146 4>, <0 147 4>,
+				     <0 148 4>, <0 149 4>,
+				     <0 150 4>, <0 151 4>,
+				     <0 152 4>, <0 153 4>,
+				     <0 154 4>, <0 155 4>,
+				     <0 156 4>, <0 157 4>,
+				     <0 158 4>, <0 159 4>,
+				     <0 160 4>, <0 161 4>,
+				     <0 162 4>, <0 163 4>,
+				     <0 164 4>, <0 165 4>,
+				     <0 166 4>, <0 167 4>,
+				     <0 168 4>, <0 169 4>,
+				     <0 170 4>, <0 171 4>,
+				     <0 172 4>, <0 173 4>,
+				     <0 174 4>, <0 175 4>,
+				     <0 176 4>, <0 177 4>,
+				     <0 178 4>, <0 179 4>,
+				     <0 180 4>, <0 181 4>,
+				     <0 182 4>, <0 183 4>,
+				     <0 184 4>, <0 185 4>,
+				     <0 186 4>, <0 187 4>,
+				     <0 188 4>, <0 189 4>,
+				     <0 190 4>, <0 191 4>,
+				     <0 192 4>, <0 193 4>,
+				     <0 194 4>, <0 195 4>,
+				     <0 196 4>, <0 197 4>,
+				     <0 198 4>, <0 199 4>,
+				     <0 200 4>, <0 201 4>,
+				     <0 202 4>, <0 203 4>,
+				     <0 204 4>, <0 205 4>,
+				     <0 206 4>, <0 207 4>,
+				     <0 208 4>, <0 209 4>;
+			mmu-masters = <&fsl_mc 0x300 0>;
+		};
+
+		dspi: dspi@2100000 {
+			status = "disabled";
+			compatible = "fsl,ls2088a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 26 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <0>;
+		};
+
+		esdhc: esdhc@2140000 {
+			status = "disabled";
+			compatible = "fsl,ls2088a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clock-frequency = <0>;	/* Updated by bootloader */
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,ls2088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 36 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,ls2088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 36 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,ls2088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 37 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,ls2088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 37 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2c0: i2c@2000000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <0 34 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen 4 3>;
+		};
+
+		i2c1: i2c@2010000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <0 34 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen 4 3>;
+		};
+
+		i2c2: i2c@2020000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <0 35 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen 4 3>;
+		};
+
+		i2c3: i2c@2030000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <0 35 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen 4 3>;
+		};
+
+		ifc: ifc@2240000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x2240000 0x0 0x20000>;
+			interrupts = <0 21 0x4>; /* Level high type */
+			little-endian;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x5 0x80000000 0x08000000
+				  2 0 0x5 0x30000000 0x00010000
+				  3 0 0x5 0x20000000 0x00010000>;
+		};
+
+		qspi: quadspi@20c0000 {
+			status = "disabled";
+			compatible = "fsl,ls2088a-qspi", "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <0 25 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "qspi_en", "qspi";
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
+				     "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 108 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
+					<0000 0 0 2 &gic 0 0 0 110 4>,
+					<0000 0 0 3 &gic 0 0 0 111 4>,
+					<0000 0 0 4 &gic 0 0 0 112 4>;
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
+				     "snps,dw-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 113 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
+					<0000 0 0 2 &gic 0 0 0 115 4>,
+					<0000 0 0 3 &gic 0 0 0 116 4>,
+					<0000 0 0 4 &gic 0 0 0 117 4>;
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
+				     "snps,dw-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+			       0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 118 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
+					<0000 0 0 2 &gic 0 0 0 120 4>,
+					<0000 0 0 3 &gic 0 0 0 121 4>,
+					<0000 0 0 4 &gic 0 0 0 122 4>;
+		};
+
+		pcie4: pcie@3700000 {
+			compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
+				     "snps,dw-pcie";
+			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
+			       0x38 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 123 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
+					<0000 0 0 2 &gic 0 0 0 125 4>,
+					<0000 0 0 3 &gic 0 0 0 126 4>,
+					<0000 0 0 4 &gic 0 0 0 127 4>;
+		};
+
+		sata0: sata@3200000 {
+			status = "disabled";
+			compatible = "fsl,ls2088a-ahci", "fsl,ls2080a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 133 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>;
+		};
+
+		sata1: sata@3210000 {
+			status = "disabled";
+			compatible = "fsl,ls2088a-ahci", "fsl,ls2080a-ahci";
+			reg = <0x0 0x3210000 0x0 0x10000>;
+			interrupts = <0 136 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>;
+		};
+
+		usb0: usb3@3100000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <0 80 0x4>; /* Level high type */
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+		};
+
+		usb1: usb3@3110000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <0 81 0x4>; /* Level high type */
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+		};
+
+		ccn@4000000 {
+			compatible = "arm,ccn-504";
+			reg = <0x0 0x04000000 0x0 0x01000000>;
+			interrupts = <0 12 4>;
+		};
+	};
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 5/7] dt-bindings: gpio: Update gpio bindings for LS2088A

[Rob Herring]

On Tue, Jun 28, 2016 at 08:18:59PM +0530, Abhimanyu Saini wrote:
> ---
>  Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/7] dt-bindings: arm: Update bindings for LS2088A targets

[Rob Herring]

On Tue, Jun 28, 2016 at 08:18:55PM +0530, Abhimanyu Saini wrote:
> Add compatible strings for LS2088A RDB and QDS board.
> 
> Signed-off-by: Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/arm/fsl.txt | 7 +++++++
>  1 file changed, 7 insertions(+)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/7] dt-bindings: pci: Update bindings for LS2088A

[Rob Herring]

On Tue, Jun 28, 2016 at 08:18:56PM +0530, Abhimanyu Saini wrote:
> Signed-off-by: Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/pci/layerscape-pci.txt | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/7] dt-bindings: mtd: fsl-quadspi: Update qspi bindings for LS2088A

[Rob Herring]

On Tue, Jun 28, 2016 at 08:18:57PM +0530, Abhimanyu Saini wrote:
> Signed-off-by: Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/mtd/fsl-quadspi.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 4/7] dt-bindings: spi: Update dspi bindings for LS2088A

[Rob Herring]

On Tue, Jun 28, 2016 at 08:18:58PM +0530, Abhimanyu Saini wrote:
> Signed-off-by: Abhimanyu Saini <abhimanyu.saini-3arQi8VN3Tc@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH 7/7] arm64: Add DTS support for FSL's LS2088A SoC

[Stuart Yoder]

> -----Original Message-----
> From: Abhimanyu Saini <abhimanyu.saini@nxp.com>
> Date: Tue, Jun 28, 2016 at 9:49 AM
> Subject: [PATCH 7/7] arm64: Add DTS support for FSL's LS2088A SoC
> To: devicetree@vger.kernel.org
> Cc: shawnguo@kernel.org, Abhimanyu Saini <abhimanyu.saini@nxp.com>
> 
> 
> This patch adds the device tree support for FSL LS2088A SoC based on
> ARMv8 architecture.
> 
> Following levels of DTSI/DTS files have been created for the LS2088A
> SoC family:
> 
>      - fsl-ls2088a.dtsi:
>             DTS-Include file for FSL LS2088A SoC.
> 
>      - fsl-ls2088a-qds.dts:
>             DTS file for FSL LS2088A QDS board.
> 
>      - fsl-ls2088a-rdb.dts:
>             DTS file for FSL LS2088A RDB board.
> 
> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/Makefile            |   2 +
>  arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts | 211 +++++++
>  arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 166 +++++
>  arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi    | 703 ++++++++++++++++++++++
>  4 files changed, 1082 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi

Acked-by: Stuart Yoder <stuart.yoder@nxp.com>