[PATCH 1/5] soc: renesas: rcar-sysc: add R8A7792 support

[PATCH 1/5] soc: renesas: rcar-sysc: add R8A7792 support

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add support for R-Car V2H (R8A7792) SoC power areas to the SYSC driver.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/Makefile       |  1 +
 drivers/soc/renesas/r8a7792-sysc.c | 34 ++++++++++++++++++++++++++++++++++
 drivers/soc/renesas/rcar-sysc.c    |  3 +++
 drivers/soc/renesas/rcar-sysc.h    |  1 +
 4 files changed, 39 insertions(+)
 create mode 100644 drivers/soc/renesas/r8a7792-sysc.c

diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index cd85cd5e6a01..623039c3514c 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_ARCH_R8A7779)	+= rcar-sysc.o r8a7779-sysc.o
 obj-$(CONFIG_ARCH_R8A7790)	+= rcar-sysc.o r8a7790-sysc.o
 obj-$(CONFIG_ARCH_R8A7791)	+= rcar-sysc.o r8a7791-sysc.o
+obj-$(CONFIG_ARCH_R8A7792)	+= rcar-sysc.o r8a7792-sysc.o
 # R-Car M2-N is identical to R-Car M2-W w.r.t. power domains.
 obj-$(CONFIG_ARCH_R8A7793)	+= rcar-sysc.o r8a7791-sysc.o
 obj-$(CONFIG_ARCH_R8A7794)	+= rcar-sysc.o r8a7794-sysc.o
diff --git a/drivers/soc/renesas/r8a7792-sysc.c b/drivers/soc/renesas/r8a7792-sysc.c
new file mode 100644
index 000000000000..ca7467d7b7ec
--- /dev/null
+++ b/drivers/soc/renesas/r8a7792-sysc.c
@@ -0,0 +1,34 @@
+/*
+ * Renesas R-Car V2H (R8A7792) System Controller
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a7792-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a7792_areas[] __initconst = {
+	{ "always-on",	    0, 0, R8A7792_PD_ALWAYS_ON,	-1, PD_ALWAYS_ON },
+	{ "ca15-scu",	0x180, 0, R8A7792_PD_CA15_SCU,	R8A7792_PD_ALWAYS_ON,
+	  PD_SCU },
+	{ "ca15-cpu0",	 0x40, 0, R8A7792_PD_CA15_CPU0,	R8A7792_PD_CA15_SCU,
+	  PD_CPU_NOCR },
+	{ "ca15-cpu1",	 0x40, 1, R8A7792_PD_CA15_CPU1,	R8A7792_PD_CA15_SCU,
+	  PD_CPU_NOCR },
+	{ "sgx",	 0xc0, 0, R8A7792_PD_SGX,	R8A7792_PD_ALWAYS_ON },
+	{ "imp",	0x140, 0, R8A7792_PD_IMP,	R8A7792_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a7792_sysc_info __initconst = {
+	.areas = r8a7792_areas,
+	.num_areas = ARRAY_SIZE(r8a7792_areas),
+};
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index fc997d4d2a4a..a43ca24699be 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -293,6 +293,9 @@ static const struct of_device_id rcar_sysc_matches[] = {
 #ifdef CONFIG_ARCH_R8A7791
 	{ .compatible = "renesas,r8a7791-sysc", .data = &r8a7791_sysc_info },
 #endif
+#ifdef CONFIG_ARCH_R8A7792
+	{ .compatible = "renesas,r8a7792-sysc", .data = &r8a7792_sysc_info },
+#endif
 #ifdef CONFIG_ARCH_R8A7793
 	/* R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. */
 	{ .compatible = "renesas,r8a7793-sysc", .data = &r8a7791_sysc_info },
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 4ac3d7bf7f38..77dbe861473f 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -53,6 +53,7 @@ struct rcar_sysc_info {
 extern const struct rcar_sysc_info r8a7779_sysc_info;
 extern const struct rcar_sysc_info r8a7790_sysc_info;
 extern const struct rcar_sysc_info r8a7791_sysc_info;
+extern const struct rcar_sysc_info r8a7792_sysc_info;
 extern const struct rcar_sysc_info r8a7794_sysc_info;
 extern const struct rcar_sysc_info r8a7795_sysc_info;
 extern const struct rcar_sysc_info r8a7796_sysc_info;
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 1/5] soc: renesas: rcar-sysc: add R8A7792 support

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add support for R-Car V2H (R8A7792) SoC power areas to the SYSC driver.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/Makefile       |  1 +
 drivers/soc/renesas/r8a7792-sysc.c | 34 ++++++++++++++++++++++++++++++++++
 drivers/soc/renesas/rcar-sysc.c    |  3 +++
 drivers/soc/renesas/rcar-sysc.h    |  1 +
 4 files changed, 39 insertions(+)
 create mode 100644 drivers/soc/renesas/r8a7792-sysc.c

diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index cd85cd5e6a01..623039c3514c 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_ARCH_R8A7779)	+= rcar-sysc.o r8a7779-sysc.o
 obj-$(CONFIG_ARCH_R8A7790)	+= rcar-sysc.o r8a7790-sysc.o
 obj-$(CONFIG_ARCH_R8A7791)	+= rcar-sysc.o r8a7791-sysc.o
+obj-$(CONFIG_ARCH_R8A7792)	+= rcar-sysc.o r8a7792-sysc.o
 # R-Car M2-N is identical to R-Car M2-W w.r.t. power domains.
 obj-$(CONFIG_ARCH_R8A7793)	+= rcar-sysc.o r8a7791-sysc.o
 obj-$(CONFIG_ARCH_R8A7794)	+= rcar-sysc.o r8a7794-sysc.o
diff --git a/drivers/soc/renesas/r8a7792-sysc.c b/drivers/soc/renesas/r8a7792-sysc.c
new file mode 100644
index 000000000000..ca7467d7b7ec
--- /dev/null
+++ b/drivers/soc/renesas/r8a7792-sysc.c
@@ -0,0 +1,34 @@
+/*
+ * Renesas R-Car V2H (R8A7792) System Controller
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a7792-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a7792_areas[] __initconst = {
+	{ "always-on",	    0, 0, R8A7792_PD_ALWAYS_ON,	-1, PD_ALWAYS_ON },
+	{ "ca15-scu",	0x180, 0, R8A7792_PD_CA15_SCU,	R8A7792_PD_ALWAYS_ON,
+	  PD_SCU },
+	{ "ca15-cpu0",	 0x40, 0, R8A7792_PD_CA15_CPU0,	R8A7792_PD_CA15_SCU,
+	  PD_CPU_NOCR },
+	{ "ca15-cpu1",	 0x40, 1, R8A7792_PD_CA15_CPU1,	R8A7792_PD_CA15_SCU,
+	  PD_CPU_NOCR },
+	{ "sgx",	 0xc0, 0, R8A7792_PD_SGX,	R8A7792_PD_ALWAYS_ON },
+	{ "imp",	0x140, 0, R8A7792_PD_IMP,	R8A7792_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a7792_sysc_info __initconst = {
+	.areas = r8a7792_areas,
+	.num_areas = ARRAY_SIZE(r8a7792_areas),
+};
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index fc997d4d2a4a..a43ca24699be 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -293,6 +293,9 @@ static const struct of_device_id rcar_sysc_matches[] = {
 #ifdef CONFIG_ARCH_R8A7791
 	{ .compatible = "renesas,r8a7791-sysc", .data = &r8a7791_sysc_info },
 #endif
+#ifdef CONFIG_ARCH_R8A7792
+	{ .compatible = "renesas,r8a7792-sysc", .data = &r8a7792_sysc_info },
+#endif
 #ifdef CONFIG_ARCH_R8A7793
 	/* R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. */
 	{ .compatible = "renesas,r8a7793-sysc", .data = &r8a7791_sysc_info },
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 4ac3d7bf7f38..77dbe861473f 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -53,6 +53,7 @@ struct rcar_sysc_info {
 extern const struct rcar_sysc_info r8a7779_sysc_info;
 extern const struct rcar_sysc_info r8a7790_sysc_info;
 extern const struct rcar_sysc_info r8a7791_sysc_info;
+extern const struct rcar_sysc_info r8a7792_sysc_info;
 extern const struct rcar_sysc_info r8a7794_sysc_info;
 extern const struct rcar_sysc_info r8a7795_sysc_info;
 extern const struct rcar_sysc_info r8a7796_sysc_info;
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 2/5] soc: renesas: rcar-sysc: Fix uninitialized error code in rcar_sysc_pd_init()

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

On success, rcar_sysc_pd_init() returns an uninitialized error code.
Use the return value of of_genpd_add_provider_onecell() to fix this.

This went unnoticed, as early_initcall() doesn't care about the return
value.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/rcar-sysc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index a43ca24699be..59a8152681a5 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -398,7 +398,7 @@ static int __init rcar_sysc_pd_init(void)
 		domains->domains[area->isr_bit] = &pd->genpd;
 	}
 
-	of_genpd_add_provider_onecell(np, &domains->onecell_data);
+	error = of_genpd_add_provider_onecell(np, &domains->onecell_data);
 
 out_put:
 	of_node_put(np);
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 2/5] soc: renesas: rcar-sysc: Fix uninitialized error code in rcar_sysc_pd_init()

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

On success, rcar_sysc_pd_init() returns an uninitialized error code.
Use the return value of of_genpd_add_provider_onecell() to fix this.

This went unnoticed, as early_initcall() doesn't care about the return
value.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/rcar-sysc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index a43ca24699be..59a8152681a5 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -398,7 +398,7 @@ static int __init rcar_sysc_pd_init(void)
 		domains->domains[area->isr_bit] = &pd->genpd;
 	}
 
-	of_genpd_add_provider_onecell(np, &domains->onecell_data);
+	error = of_genpd_add_provider_onecell(np, &domains->onecell_data);
 
 out_put:
 	of_node_put(np);
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 3/5] soc: renesas: rcar-sysc: Make rcar_sysc_init() init the PM domains

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Let rcar_sysc_init() trigger initialization of the SYSC PM domains from
DT if called before the early_initcall.
On failure, it falls back to mapping the passed register block, as
before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/rcar-sysc.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 59a8152681a5..68d6856c9d3c 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -164,15 +164,6 @@ static bool rcar_sysc_power_is_off(const struct rcar_sysc_ch *sysc_ch)
 	return false;
 }
 
-void __iomem *rcar_sysc_init(phys_addr_t base)
-{
-	rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
-	if (!rcar_sysc_base)
-		panic("unable to ioremap R-Car SYSC hardware block\n");
-
-	return rcar_sysc_base;
-}
-
 struct rcar_sysc_pd {
 	struct generic_pm_domain genpd;
 	struct rcar_sysc_ch ch;
@@ -328,6 +319,9 @@ static int __init rcar_sysc_pd_init(void)
 	unsigned int i;
 	int error;
 
+	if (rcar_sysc_base)
+		return 0;
+
 	np = of_find_matching_node_and_match(NULL, rcar_sysc_matches, &match);
 	if (!np)
 		return -ENODEV;
@@ -405,3 +399,11 @@ out_put:
 	return error;
 }
 early_initcall(rcar_sysc_pd_init);
+
+void __iomem * __init rcar_sysc_init(phys_addr_t base)
+{
+	if (rcar_sysc_pd_init())
+		rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
+
+	return rcar_sysc_base;
+}
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 3/5] soc: renesas: rcar-sysc: Make rcar_sysc_init() init the PM domains

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Let rcar_sysc_init() trigger initialization of the SYSC PM domains from
DT if called before the early_initcall.
On failure, it falls back to mapping the passed register block, as
before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/rcar-sysc.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 59a8152681a5..68d6856c9d3c 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -164,15 +164,6 @@ static bool rcar_sysc_power_is_off(const struct rcar_sysc_ch *sysc_ch)
 	return false;
 }
 
-void __iomem *rcar_sysc_init(phys_addr_t base)
-{
-	rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
-	if (!rcar_sysc_base)
-		panic("unable to ioremap R-Car SYSC hardware block\n");
-
-	return rcar_sysc_base;
-}
-
 struct rcar_sysc_pd {
 	struct generic_pm_domain genpd;
 	struct rcar_sysc_ch ch;
@@ -328,6 +319,9 @@ static int __init rcar_sysc_pd_init(void)
 	unsigned int i;
 	int error;
 
+	if (rcar_sysc_base)
+		return 0;
+
 	np = of_find_matching_node_and_match(NULL, rcar_sysc_matches, &match);
 	if (!np)
 		return -ENODEV;
@@ -405,3 +399,11 @@ out_put:
 	return error;
 }
 early_initcall(rcar_sysc_pd_init);
+
+void __iomem * __init rcar_sysc_init(phys_addr_t base)
+{
+	if (rcar_sysc_pd_init())
+		rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
+
+	return rcar_sysc_base;
+}
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 4/5] soc: renesas: rcar-sysc: Move SYSC interrupt config to rcar-sysc driver

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

On R-Car H1 and Gen2, the SYSC interrupt registers are always configured
using hardcoded values in platform code. For R-Car Gen2, values are
provided for H2 and M2-W only, other SoCs are not yet supported, and
never will be.

Move this configuration from SoC-specific platform code to the
rcar_sysc_init() wrapper, so it can be skipped if the SYSC is configured
from DT. This would be the case not only for H1, H2, and M2-W using a
modern DTS, but also for other R-Car Gen2 SoCs not supported by the
platform code, relying purely on DT.

There is no longer a need to return the mapped register block, hence
make the function return void.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-r8a7779.c   |  6 +-----
 arch/arm/mach-shmobile/pm-rcar-gen2.c |  6 +-----
 drivers/soc/renesas/rcar-sysc.c       | 12 ++++++++----
 include/linux/soc/renesas/rcar-sysc.h |  2 +-
 4 files changed, 11 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index 4174cbcbc467..5c9a93f5e650 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -23,11 +23,7 @@
 
 static void __init r8a7779_sysc_init(void)
 {
-	void __iomem *base = rcar_sysc_init(0xffd85000);
-
-	/* enable all interrupt sources, but do not use interrupt handler */
-	iowrite32(0x0131000e, base + SYSCIER);
-	iowrite32(0, base + SYSCIMR);
+	rcar_sysc_init(0xffd85000, 0x0131000e);
 }
 
 #else /* CONFIG_PM || CONFIG_SMP */
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index 691ac166a277..7768fd1bce65 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -37,11 +37,7 @@
 
 static void __init rcar_gen2_sysc_init(u32 syscier)
 {
-	void __iomem *base = rcar_sysc_init(0xe6180000);
-
-	/* enable all interrupt sources, but do not use interrupt handler */
-	iowrite32(syscier, base + SYSCIER);
-	iowrite32(0, base + SYSCIMR);
+	rcar_sysc_init(0xe6180000, syscier);
 }
 
 #else /* CONFIG_SMP */
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 68d6856c9d3c..22f0d646225c 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -400,10 +400,14 @@ out_put:
 }
 early_initcall(rcar_sysc_pd_init);
 
-void __iomem * __init rcar_sysc_init(phys_addr_t base)
+void __init rcar_sysc_init(phys_addr_t base, u32 syscier)
 {
-	if (rcar_sysc_pd_init())
-		rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
+	if (!rcar_sysc_pd_init())
+		return;
 
-	return rcar_sysc_base;
+	rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
+
+	/* enable all interrupt sources, but do not use interrupt handler */
+	iowrite32(syscier, rcar_sysc_base + SYSCIER);
+	iowrite32(0, rcar_sysc_base + SYSCIMR);
 }
diff --git a/include/linux/soc/renesas/rcar-sysc.h b/include/linux/soc/renesas/rcar-sysc.h
index 92fc613ab23d..7b8b280c181b 100644
--- a/include/linux/soc/renesas/rcar-sysc.h
+++ b/include/linux/soc/renesas/rcar-sysc.h
@@ -11,6 +11,6 @@ struct rcar_sysc_ch {
 
 int rcar_sysc_power_down(const struct rcar_sysc_ch *sysc_ch);
 int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch);
-void __iomem *rcar_sysc_init(phys_addr_t base);
+void rcar_sysc_init(phys_addr_t base, u32 syscier);
 
 #endif /* __LINUX_SOC_RENESAS_RCAR_SYSC_H__ */
-- 
2.7.0.rc3.207.g0ac5344

[GIT PULL] Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.8

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these second round of Renesas ARM based SoC R-Car SYSC
updates for v4.8.

This pull request is based on the previous round of
such requests, tagged as renesas-rcar-sysc-for-v4.8,
which you have already pulled.


The following changes since commit e0c98b9171eecf1745eda08de86081db8ec41d51:

  soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas (2016-06-06 10:14:21 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-rcar-sysc2-for-v4.8

for you to fetch changes up to ced42730d19dd140a76f86c3761f646b83a35d09:

  soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper (2016-06-29 14:37:24 +0200)

----------------------------------------------------------------
Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.8

* Prepare for handling SYSC interrupt configuration purely
  from DT in the rcar-sysc driver for new SoCs, while preserving
  backward compatibility with old DTBs for R-Car H1, H2, and M2-W
* Add R8A7792 support

----------------------------------------------------------------
Geert Uytterhoeven (4):
      soc: renesas: rcar-sysc: Fix uninitialized error code in rcar_sysc_pd_init()
      soc: renesas: rcar-sysc: Make rcar_sysc_init() init the PM domains
      soc: renesas: rcar-sysc: Move SYSC interrupt config to rcar-sysc driver
      soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper

Sergei Shtylyov (1):
      soc: renesas: rcar-sysc: add R8A7792 support

 arch/arm/mach-shmobile/pm-r8a7779.c   |  6 +----
 arch/arm/mach-shmobile/pm-rcar-gen2.c |  6 +----
 drivers/soc/renesas/Makefile          |  1 +
 drivers/soc/renesas/r8a7792-sysc.c    | 34 ++++++++++++++++++++++++++++
 drivers/soc/renesas/rcar-sysc.c       | 42 ++++++++++++++++++++++++++---------
 drivers/soc/renesas/rcar-sysc.h       |  1 +
 include/linux/soc/renesas/rcar-sysc.h |  2 +-
 7 files changed, 71 insertions(+), 21 deletions(-)
 create mode 100644 drivers/soc/renesas/r8a7792-sysc.c

[GIT PULL] Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.8

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these second round of Renesas ARM based SoC R-Car SYSC
updates for v4.8.

This pull request is based on the previous round of
such requests, tagged as renesas-rcar-sysc-for-v4.8,
which you have already pulled.


The following changes since commit e0c98b9171eecf1745eda08de86081db8ec41d51:

  soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas (2016-06-06 10:14:21 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-rcar-sysc2-for-v4.8

for you to fetch changes up to ced42730d19dd140a76f86c3761f646b83a35d09:

  soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper (2016-06-29 14:37:24 +0200)

----------------------------------------------------------------
Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.8

* Prepare for handling SYSC interrupt configuration purely
  from DT in the rcar-sysc driver for new SoCs, while preserving
  backward compatibility with old DTBs for R-Car H1, H2, and M2-W
* Add R8A7792 support

----------------------------------------------------------------
Geert Uytterhoeven (4):
      soc: renesas: rcar-sysc: Fix uninitialized error code in rcar_sysc_pd_init()
      soc: renesas: rcar-sysc: Make rcar_sysc_init() init the PM domains
      soc: renesas: rcar-sysc: Move SYSC interrupt config to rcar-sysc driver
      soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper

Sergei Shtylyov (1):
      soc: renesas: rcar-sysc: add R8A7792 support

 arch/arm/mach-shmobile/pm-r8a7779.c   |  6 +----
 arch/arm/mach-shmobile/pm-rcar-gen2.c |  6 +----
 drivers/soc/renesas/Makefile          |  1 +
 drivers/soc/renesas/r8a7792-sysc.c    | 34 ++++++++++++++++++++++++++++
 drivers/soc/renesas/rcar-sysc.c       | 42 ++++++++++++++++++++++++++---------
 drivers/soc/renesas/rcar-sysc.h       |  1 +
 include/linux/soc/renesas/rcar-sysc.h |  2 +-
 7 files changed, 71 insertions(+), 21 deletions(-)
 create mode 100644 drivers/soc/renesas/r8a7792-sysc.c

[PATCH 4/5] soc: renesas: rcar-sysc: Move SYSC interrupt config to rcar-sysc driver

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

On R-Car H1 and Gen2, the SYSC interrupt registers are always configured
using hardcoded values in platform code. For R-Car Gen2, values are
provided for H2 and M2-W only, other SoCs are not yet supported, and
never will be.

Move this configuration from SoC-specific platform code to the
rcar_sysc_init() wrapper, so it can be skipped if the SYSC is configured
from DT. This would be the case not only for H1, H2, and M2-W using a
modern DTS, but also for other R-Car Gen2 SoCs not supported by the
platform code, relying purely on DT.

There is no longer a need to return the mapped register block, hence
make the function return void.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/pm-r8a7779.c   |  6 +-----
 arch/arm/mach-shmobile/pm-rcar-gen2.c |  6 +-----
 drivers/soc/renesas/rcar-sysc.c       | 12 ++++++++----
 include/linux/soc/renesas/rcar-sysc.h |  2 +-
 4 files changed, 11 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index 4174cbcbc467..5c9a93f5e650 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -23,11 +23,7 @@
 
 static void __init r8a7779_sysc_init(void)
 {
-	void __iomem *base = rcar_sysc_init(0xffd85000);
-
-	/* enable all interrupt sources, but do not use interrupt handler */
-	iowrite32(0x0131000e, base + SYSCIER);
-	iowrite32(0, base + SYSCIMR);
+	rcar_sysc_init(0xffd85000, 0x0131000e);
 }
 
 #else /* CONFIG_PM || CONFIG_SMP */
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index 691ac166a277..7768fd1bce65 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -37,11 +37,7 @@
 
 static void __init rcar_gen2_sysc_init(u32 syscier)
 {
-	void __iomem *base = rcar_sysc_init(0xe6180000);
-
-	/* enable all interrupt sources, but do not use interrupt handler */
-	iowrite32(syscier, base + SYSCIER);
-	iowrite32(0, base + SYSCIMR);
+	rcar_sysc_init(0xe6180000, syscier);
 }
 
 #else /* CONFIG_SMP */
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 68d6856c9d3c..22f0d646225c 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -400,10 +400,14 @@ out_put:
 }
 early_initcall(rcar_sysc_pd_init);
 
-void __iomem * __init rcar_sysc_init(phys_addr_t base)
+void __init rcar_sysc_init(phys_addr_t base, u32 syscier)
 {
-	if (rcar_sysc_pd_init())
-		rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
+	if (!rcar_sysc_pd_init())
+		return;
 
-	return rcar_sysc_base;
+	rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
+
+	/* enable all interrupt sources, but do not use interrupt handler */
+	iowrite32(syscier, rcar_sysc_base + SYSCIER);
+	iowrite32(0, rcar_sysc_base + SYSCIMR);
 }
diff --git a/include/linux/soc/renesas/rcar-sysc.h b/include/linux/soc/renesas/rcar-sysc.h
index 92fc613ab23d..7b8b280c181b 100644
--- a/include/linux/soc/renesas/rcar-sysc.h
+++ b/include/linux/soc/renesas/rcar-sysc.h
@@ -11,6 +11,6 @@ struct rcar_sysc_ch {
 
 int rcar_sysc_power_down(const struct rcar_sysc_ch *sysc_ch);
 int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch);
-void __iomem *rcar_sysc_init(phys_addr_t base);
+void rcar_sysc_init(phys_addr_t base, u32 syscier);
 
 #endif /* __LINUX_SOC_RENESAS_RCAR_SYSC_H__ */
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 5/5] soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Align SYSC interrupt configuration in the legacy wrapper with the DT
version:
  - Mask SYSC interrupt sources before enabling them (doesn't matter
    much as they're disabled at the GIC level anyway),
  - Make sure not to clear reserved SYSCIMR bits that were set before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/rcar-sysc.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 22f0d646225c..65c8e1eb90c0 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -402,12 +402,25 @@ early_initcall(rcar_sysc_pd_init);
 
 void __init rcar_sysc_init(phys_addr_t base, u32 syscier)
 {
+	u32 syscimr;
+
 	if (!rcar_sysc_pd_init())
 		return;
 
 	rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
 
-	/* enable all interrupt sources, but do not use interrupt handler */
+	/*
+	 * Mask all interrupt sources to prevent the CPU from receiving them.
+	 * Make sure not to clear reserved bits that were set before.
+	 */
+	syscimr = ioread32(rcar_sysc_base + SYSCIMR);
+	syscimr |= syscier;
+	pr_debug("%s: syscimr = 0x%08x\n", __func__, syscimr);
+	iowrite32(syscimr, rcar_sysc_base + SYSCIMR);
+
+	/*
+	 * SYSC needs all interrupt sources enabled to control power.
+	 */
+	pr_debug("%s: syscier = 0x%08x\n", __func__, syscier);
 	iowrite32(syscier, rcar_sysc_base + SYSCIER);
-	iowrite32(0, rcar_sysc_base + SYSCIMR);
 }
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 5/5] soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Align SYSC interrupt configuration in the legacy wrapper with the DT
version:
  - Mask SYSC interrupt sources before enabling them (doesn't matter
    much as they're disabled at the GIC level anyway),
  - Make sure not to clear reserved SYSCIMR bits that were set before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/rcar-sysc.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 22f0d646225c..65c8e1eb90c0 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -402,12 +402,25 @@ early_initcall(rcar_sysc_pd_init);
 
 void __init rcar_sysc_init(phys_addr_t base, u32 syscier)
 {
+	u32 syscimr;
+
 	if (!rcar_sysc_pd_init())
 		return;
 
 	rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE);
 
-	/* enable all interrupt sources, but do not use interrupt handler */
+	/*
+	 * Mask all interrupt sources to prevent the CPU from receiving them.
+	 * Make sure not to clear reserved bits that were set before.
+	 */
+	syscimr = ioread32(rcar_sysc_base + SYSCIMR);
+	syscimr |= syscier;
+	pr_debug("%s: syscimr = 0x%08x\n", __func__, syscimr);
+	iowrite32(syscimr, rcar_sysc_base + SYSCIMR);
+
+	/*
+	 * SYSC needs all interrupt sources enabled to control power.
+	 */
+	pr_debug("%s: syscier = 0x%08x\n", __func__, syscier);
 	iowrite32(syscier, rcar_sysc_base + SYSCIER);
-	iowrite32(0, rcar_sysc_base + SYSCIMR);
 }
-- 
2.7.0.rc3.207.g0ac5344

Re: [GIT PULL] Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.8

[Olof Johansson]

On Thu, Jun 30, 2016 at 04:16:11PM +0200, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these second round of Renesas ARM based SoC R-Car SYSC
> updates for v4.8.
> 
> This pull request is based on the previous round of
> such requests, tagged as renesas-rcar-sysc-for-v4.8,
> which you have already pulled.
> 
> 
> The following changes since commit e0c98b9171eecf1745eda08de86081db8ec41d51:
> 
>   soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas (2016-06-06 10:14:21 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-rcar-sysc2-for-v4.8
> 
> for you to fetch changes up to ced42730d19dd140a76f86c3761f646b83a35d09:
> 
>   soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper (2016-06-29 14:37:24 +0200)
> 
> ----------------------------------------------------------------
> Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.8
> 
> * Prepare for handling SYSC interrupt configuration purely
>   from DT in the rcar-sysc driver for new SoCs, while preserving
>   backward compatibility with old DTBs for R-Car H1, H2, and M2-W
> * Add R8A7792 support

Merged, thanks.


-Olof

[GIT PULL] Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.8

[Olof Johansson]

On Thu, Jun 30, 2016 at 04:16:11PM +0200, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these second round of Renesas ARM based SoC R-Car SYSC
> updates for v4.8.
> 
> This pull request is based on the previous round of
> such requests, tagged as renesas-rcar-sysc-for-v4.8,
> which you have already pulled.
> 
> 
> The following changes since commit e0c98b9171eecf1745eda08de86081db8ec41d51:
> 
>   soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas (2016-06-06 10:14:21 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-rcar-sysc2-for-v4.8
> 
> for you to fetch changes up to ced42730d19dd140a76f86c3761f646b83a35d09:
> 
>   soc: renesas: rcar-sysc: Improve SYSC interrupt config in legacy wrapper (2016-06-29 14:37:24 +0200)
> 
> ----------------------------------------------------------------
> Second Round of Renesas ARM Based SoC R-Car SYSC Updates for v4.8
> 
> * Prepare for handling SYSC interrupt configuration purely
>   from DT in the rcar-sysc driver for new SoCs, while preserving
>   backward compatibility with old DTBs for R-Car H1, H2, and M2-W
> * Add R8A7792 support

Merged, thanks.


-Olof