* [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes
@ 2016-07-08 18:49 ` Florian Fainelli
0 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2016-07-08 18:49 UTC (permalink / raw)
To: netdev
Cc: devicetree, bcm-kernel-feedback-list, jon.mason, andrew,
vivien.didelot, linux-arm-kernel, Florian Fainelli
This patch series is based on Broadcom/stblinux/devicetree/next which
contains proper support for the BCM958625HR board. To get working
Ethernet switch and CPU Ethernet support, the following dependencies
based on David Miller's net-next tree are required:
- Jon Mason's BGMAC/AMAC support: https://marc.info/?t=146793308300002&r=1&w=3
- dsa/b53 support for NSP switch: https://marc.info/?l=linux-netdev&m=146800324531914&w=3
Florian Fainelli (2):
ARM: dts: NSP: Add Switch Register Access Block node
ARM: dts: NSP: Add BCM958625HR switch ports
arch/arm/boot/dts/bcm-nsp.dtsi | 11 +++++++++
arch/arm/boot/dts/bcm958625hr.dts | 49 +++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
--
2.7.4
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes
@ 2016-07-08 18:49 ` Florian Fainelli
0 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2016-07-08 18:49 UTC (permalink / raw)
To: linux-arm-kernel
This patch series is based on Broadcom/stblinux/devicetree/next which
contains proper support for the BCM958625HR board. To get working
Ethernet switch and CPU Ethernet support, the following dependencies
based on David Miller's net-next tree are required:
- Jon Mason's BGMAC/AMAC support: https://marc.info/?t=146793308300002&r=1&w=3
- dsa/b53 support for NSP switch: https://marc.info/?l=linux-netdev&m=146800324531914&w=3
Florian Fainelli (2):
ARM: dts: NSP: Add Switch Register Access Block node
ARM: dts: NSP: Add BCM958625HR switch ports
arch/arm/boot/dts/bcm-nsp.dtsi | 11 +++++++++
arch/arm/boot/dts/bcm958625hr.dts | 49 +++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
--
2.7.4
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/2] ARM: dts: NSP: Add Switch Register Access Block node
2016-07-08 18:49 ` Florian Fainelli
@ 2016-07-08 18:49 ` Florian Fainelli
-1 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2016-07-08 18:49 UTC (permalink / raw)
To: netdev-u79uwXL29TY76Z2rM5mHXA
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w,
jon.mason-dY08KVG/lbpWk0Htik3J/w, andrew-g2DYL2Zd6BY,
vivien.didelot-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Florian Fainelli
Add the Switch Register Access Block node, this peripheral is identical
to the BCM5301x Northstar SoC, but we utilize the SoC-wide
"brcm,nsp-srab" compatible string to illustrate the integration
difference here.
Signed-off-by: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 8d7b35a4b5f1..983fdba905e3 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -241,6 +241,17 @@
clock-names = "apb_pclk";
};
+ srab: srab@36000 {
+ compatible = "brcm,nsp-srab";
+ reg = <0x36000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ /* ports are defined in board DTS */
+ };
+
i2c0: i2c@38000 {
compatible = "brcm,iproc-i2c";
reg = <0x38000 0x50>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 1/2] ARM: dts: NSP: Add Switch Register Access Block node
@ 2016-07-08 18:49 ` Florian Fainelli
0 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2016-07-08 18:49 UTC (permalink / raw)
To: linux-arm-kernel
Add the Switch Register Access Block node, this peripheral is identical
to the BCM5301x Northstar SoC, but we utilize the SoC-wide
"brcm,nsp-srab" compatible string to illustrate the integration
difference here.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 8d7b35a4b5f1..983fdba905e3 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -241,6 +241,17 @@
clock-names = "apb_pclk";
};
+ srab: srab at 36000 {
+ compatible = "brcm,nsp-srab";
+ reg = <0x36000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ /* ports are defined in board DTS */
+ };
+
i2c0: i2c at 38000 {
compatible = "brcm,iproc-i2c";
reg = <0x38000 0x50>;
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] ARM: dts: NSP: Add BCM958625HR switch ports
2016-07-08 18:49 ` Florian Fainelli
@ 2016-07-08 18:49 ` Florian Fainelli
-1 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2016-07-08 18:49 UTC (permalink / raw)
To: netdev
Cc: devicetree, bcm-kernel-feedback-list, jon.mason, andrew,
vivien.didelot, linux-arm-kernel, Florian Fainelli
Add the layout of the switch ports found on the BCM958625HR reference
board. The CPU port is hooked up to the AMAC0 Ethernet controlelr
adapter, so we also enable it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm958625hr.dts | 49 +++++++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 03b8bbeb694f..4239e58cf97f 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -109,3 +109,52 @@
groups = "nand_grp";
};
};
+
+&amac0 {
+ status = "okay";
+};
+
+&srab {
+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ label = "port0";
+ reg = <0>;
+ };
+
+ port@1 {
+ label = "port1";
+ reg = <1>;
+ };
+
+ port@2 {
+ label = "port2";
+ reg = <2>;
+ };
+
+ port@3 {
+ label = "port3";
+ reg = <3>;
+ };
+
+ port@4 {
+ label = "port4";
+ reg = <4>;
+ };
+
+ port@5 {
+ ethernet = <&amac0>;
+ label = "cpu";
+ reg = <5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] ARM: dts: NSP: Add BCM958625HR switch ports
@ 2016-07-08 18:49 ` Florian Fainelli
0 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2016-07-08 18:49 UTC (permalink / raw)
To: linux-arm-kernel
Add the layout of the switch ports found on the BCM958625HR reference
board. The CPU port is hooked up to the AMAC0 Ethernet controlelr
adapter, so we also enable it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm958625hr.dts | 49 +++++++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 03b8bbeb694f..4239e58cf97f 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -109,3 +109,52 @@
groups = "nand_grp";
};
};
+
+&amac0 {
+ status = "okay";
+};
+
+&srab {
+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ label = "port0";
+ reg = <0>;
+ };
+
+ port at 1 {
+ label = "port1";
+ reg = <1>;
+ };
+
+ port at 2 {
+ label = "port2";
+ reg = <2>;
+ };
+
+ port at 3 {
+ label = "port3";
+ reg = <3>;
+ };
+
+ port at 4 {
+ label = "port4";
+ reg = <4>;
+ };
+
+ port at 5 {
+ ethernet = <&amac0>;
+ label = "cpu";
+ reg = <5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes
2016-07-08 18:49 ` Florian Fainelli
@ 2016-07-08 20:07 ` Andrew Lunn
-1 siblings, 0 replies; 14+ messages in thread
From: Andrew Lunn @ 2016-07-08 20:07 UTC (permalink / raw)
To: Florian Fainelli
Cc: netdev-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w,
jon.mason-dY08KVG/lbpWk0Htik3J/w,
vivien.didelot-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Fri, Jul 08, 2016 at 11:49:27AM -0700, Florian Fainelli wrote:
> This patch series is based on Broadcom/stblinux/devicetree/next which
> contains proper support for the BCM958625HR board. To get working
> Ethernet switch and CPU Ethernet support, the following dependencies
> based on David Miller's net-next tree are required:
Reviewed-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes
@ 2016-07-08 20:07 ` Andrew Lunn
0 siblings, 0 replies; 14+ messages in thread
From: Andrew Lunn @ 2016-07-08 20:07 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jul 08, 2016 at 11:49:27AM -0700, Florian Fainelli wrote:
> This patch series is based on Broadcom/stblinux/devicetree/next which
> contains proper support for the BCM958625HR board. To get working
> Ethernet switch and CPU Ethernet support, the following dependencies
> based on David Miller's net-next tree are required:
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes
2016-07-08 20:07 ` Andrew Lunn
@ 2016-07-11 23:29 ` Florian Fainelli
-1 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2016-07-11 23:29 UTC (permalink / raw)
To: Andrew Lunn
Cc: netdev, devicetree, bcm-kernel-feedback-list, jon.mason,
vivien.didelot, linux-arm-kernel
On 07/08/2016 01:07 PM, Andrew Lunn wrote:
> On Fri, Jul 08, 2016 at 11:49:27AM -0700, Florian Fainelli wrote:
>> This patch series is based on Broadcom/stblinux/devicetree/next which
>> contains proper support for the BCM958625HR board. To get working
>> Ethernet switch and CPU Ethernet support, the following dependencies
>> based on David Miller's net-next tree are required:
>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Both applied, thanks!
--
Florian
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes
@ 2016-07-11 23:29 ` Florian Fainelli
0 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2016-07-11 23:29 UTC (permalink / raw)
To: linux-arm-kernel
On 07/08/2016 01:07 PM, Andrew Lunn wrote:
> On Fri, Jul 08, 2016 at 11:49:27AM -0700, Florian Fainelli wrote:
>> This patch series is based on Broadcom/stblinux/devicetree/next which
>> contains proper support for the BCM958625HR board. To get working
>> Ethernet switch and CPU Ethernet support, the following dependencies
>> based on David Miller's net-next tree are required:
>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Both applied, thanks!
--
Florian
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes
2016-07-08 18:48 ` Florian Fainelli
@ 2016-07-08 18:52 ` Florian Fainelli
-1 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2016-07-08 18:52 UTC (permalink / raw)
To: netdev-u79uwXL29TY76Z2rM5mHXA
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w,
jon.mason-dY08KVG/lbpWk0Htik3J/w, andrew-g2DYL2Zd6BY,
vivien.didelot-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On 07/08/2016 11:48 AM, Florian Fainelli wrote:
> This patch series is based on Broadcom/stblinux/devicetree/next which
> contains proper support for the BCM958625HR board. To get working
> Ethernet switch and CPU Ethernet support, the following dependencies
> based on David Miller's net-next tree are required:
>
> - Jon Mason's BGMAC/AMAC support: https://marc.info/?t=146793308300002&r=1&w=3
> - dsa/b53 support for NSP switch: https://marc.info/?l=linux-netdev&m=146800324531914&w=3
Please ignore this series, it contained patches from a previous
submission, see this one instead:
1468003769-26959-1-git-send-email-f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>
> Florian Fainelli (2):
> ARM: dts: NSP: Add Switch Register Access Block node
> ARM: dts: NSP: Add BCM958625HR switch ports
>
> arch/arm/boot/dts/bcm-nsp.dtsi | 11 +++++++++
> arch/arm/boot/dts/bcm958625hr.dts | 49 +++++++++++++++++++++++++++++++++++++++
> 2 files changed, 60 insertions(+)
>
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes
@ 2016-07-08 18:52 ` Florian Fainelli
0 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2016-07-08 18:52 UTC (permalink / raw)
To: linux-arm-kernel
On 07/08/2016 11:48 AM, Florian Fainelli wrote:
> This patch series is based on Broadcom/stblinux/devicetree/next which
> contains proper support for the BCM958625HR board. To get working
> Ethernet switch and CPU Ethernet support, the following dependencies
> based on David Miller's net-next tree are required:
>
> - Jon Mason's BGMAC/AMAC support: https://marc.info/?t=146793308300002&r=1&w=3
> - dsa/b53 support for NSP switch: https://marc.info/?l=linux-netdev&m=146800324531914&w=3
Please ignore this series, it contained patches from a previous
submission, see this one instead:
1468003769-26959-1-git-send-email-f.fainelli at gmail.com>
>
> Florian Fainelli (2):
> ARM: dts: NSP: Add Switch Register Access Block node
> ARM: dts: NSP: Add BCM958625HR switch ports
>
> arch/arm/boot/dts/bcm-nsp.dtsi | 11 +++++++++
> arch/arm/boot/dts/bcm958625hr.dts | 49 +++++++++++++++++++++++++++++++++++++++
> 2 files changed, 60 insertions(+)
>
--
Florian
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes
@ 2016-07-08 18:48 ` Florian Fainelli
0 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2016-07-08 18:48 UTC (permalink / raw)
To: netdev-u79uwXL29TY76Z2rM5mHXA
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w,
jon.mason-dY08KVG/lbpWk0Htik3J/w, andrew-g2DYL2Zd6BY,
vivien.didelot-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Florian Fainelli
This patch series is based on Broadcom/stblinux/devicetree/next which
contains proper support for the BCM958625HR board. To get working
Ethernet switch and CPU Ethernet support, the following dependencies
based on David Miller's net-next tree are required:
- Jon Mason's BGMAC/AMAC support: https://marc.info/?t=146793308300002&r=1&w=3
- dsa/b53 support for NSP switch: https://marc.info/?l=linux-netdev&m=146800324531914&w=3
Florian Fainelli (2):
ARM: dts: NSP: Add Switch Register Access Block node
ARM: dts: NSP: Add BCM958625HR switch ports
arch/arm/boot/dts/bcm-nsp.dtsi | 11 +++++++++
arch/arm/boot/dts/bcm958625hr.dts | 49 +++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes
@ 2016-07-08 18:48 ` Florian Fainelli
0 siblings, 0 replies; 14+ messages in thread
From: Florian Fainelli @ 2016-07-08 18:48 UTC (permalink / raw)
To: linux-arm-kernel
This patch series is based on Broadcom/stblinux/devicetree/next which
contains proper support for the BCM958625HR board. To get working
Ethernet switch and CPU Ethernet support, the following dependencies
based on David Miller's net-next tree are required:
- Jon Mason's BGMAC/AMAC support: https://marc.info/?t=146793308300002&r=1&w=3
- dsa/b53 support for NSP switch: https://marc.info/?l=linux-netdev&m=146800324531914&w=3
Florian Fainelli (2):
ARM: dts: NSP: Add Switch Register Access Block node
ARM: dts: NSP: Add BCM958625HR switch ports
arch/arm/boot/dts/bcm-nsp.dtsi | 11 +++++++++
arch/arm/boot/dts/bcm958625hr.dts | 49 +++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
--
2.7.4
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2016-07-11 23:29 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-07-08 18:49 [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes Florian Fainelli
2016-07-08 18:49 ` Florian Fainelli
2016-07-08 18:49 ` [PATCH 2/2] ARM: dts: NSP: Add BCM958625HR switch ports Florian Fainelli
2016-07-08 18:49 ` Florian Fainelli
[not found] ` <1468003769-26959-1-git-send-email-f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-07-08 18:49 ` [PATCH 1/2] ARM: dts: NSP: Add Switch Register Access Block node Florian Fainelli
2016-07-08 18:49 ` Florian Fainelli
2016-07-08 20:07 ` [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes Andrew Lunn
2016-07-08 20:07 ` Andrew Lunn
2016-07-11 23:29 ` Florian Fainelli
2016-07-11 23:29 ` Florian Fainelli
-- strict thread matches above, loose matches on Subject: below --
2016-07-08 18:48 Florian Fainelli
2016-07-08 18:48 ` Florian Fainelli
[not found] ` <1468003735-26895-1-git-send-email-f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-07-08 18:52 ` Florian Fainelli
2016-07-08 18:52 ` Florian Fainelli
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.