* [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode
@ 2016-07-21 14:00 marcandre.lureau
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 01/12] qapi-schema: use generated marshaller for 'qmp_capabilities' marcandre.lureau
` (11 more replies)
0 siblings, 12 replies; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Hi,
Although some QMP commands are still not fully qapi'fied, it is
possible to use more qapi common and generated code by dropping the
'middle' mode.
v2:
- rebased on master
- add Since: 0.13 to qmp_capabilities and device_add documentation
- fix device_add doc
- add missing spaces after ',' in get_qmp_greeting()
- fix some grammar in monitor.c while touching it
Marc-André Lureau (12):
qapi-schema: use generated marshaller for 'qmp_capabilities'
qapi-schema: add 'device_add'
monitor: register gen:false commands manually
monitor: remove usage of generated marshal functions
monitor: register the qapi generated commands
monitor: remove mhandler.cmd_new
monitor: implement 'qmp_query_commands' without qmp_cmds
build-sys: remove qmp-commands-old.h
qapi: remove the "middle" mode
monitor: use qmp_dispatch()
qmp: update qmp_query_spice fallback
Drop qmp-commands.hx
monitor.c | 408 +++---------
.gitignore | 1 -
MAINTAINERS | 2 +-
Makefile | 5 +-
Makefile.target | 7 +-
docs/qapi-code-gen.txt | 6 +-
docs/writing-qmp-commands.txt | 46 +-
hmp-commands-info.hx | 118 ++--
hmp-commands.hx | 208 +++---
qapi-schema.json | 50 ++
qmp-commands.hx => qmp-commands.txt | 1256 +----------------------------------
qmp.c | 16 -
scripts/qapi-commands.py | 29 +-
trace-events | 1 -
vl.c | 1 +
15 files changed, 323 insertions(+), 1831 deletions(-)
rename qmp-commands.hx => qmp-commands.txt (82%)
--
2.9.0
^ permalink raw reply [flat|nested] 44+ messages in thread
* [Qemu-devel] [PATCH v2 01/12] qapi-schema: use generated marshaller for 'qmp_capabilities'
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
@ 2016-07-21 14:00 ` marcandre.lureau
2016-08-05 10:52 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 02/12] qapi-schema: add 'device_add' marcandre.lureau
` (10 subsequent siblings)
11 siblings, 1 reply; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
qapi'fy the 'qmp_capabilities' command.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
monitor.c | 4 ++--
qapi-schema.json | 21 +++++++++++++++++++++
qmp-commands.hx | 2 +-
3 files changed, 24 insertions(+), 3 deletions(-)
diff --git a/monitor.c b/monitor.c
index 5d68a5d..cb1a0c7 100644
--- a/monitor.c
+++ b/monitor.c
@@ -617,7 +617,7 @@ static void monitor_qapi_event_init(void)
qmp_event_set_func_emit(monitor_qapi_event_queue);
}
-static void qmp_capabilities(QDict *params, QObject **ret_data, Error **errp)
+void qmp_qmp_capabilities(Error **errp)
{
cur_mon->qmp.in_command_mode = true;
}
@@ -3649,7 +3649,7 @@ static int monitor_can_read(void *opaque)
static bool invalid_qmp_mode(const Monitor *mon, const mon_cmd_t *cmd,
Error **errp)
{
- bool is_cap = cmd->mhandler.cmd_new == qmp_capabilities;
+ bool is_cap = cmd->mhandler.cmd_new == qmp_marshal_qmp_capabilities;
if (is_cap && mon->qmp.in_command_mode) {
error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,
diff --git a/qapi-schema.json b/qapi-schema.json
index 5658723..03c15d8 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -20,6 +20,27 @@
# QAPI introspection
{ 'include': 'qapi/introspect.json' }
+##
+# @qmp_capabilities:
+#
+# Enable QMP capabilities.
+#
+# Arguments: None.
+#
+# Example:
+#
+# -> { "execute": "qmp_capabilities" }
+# <- { "return": {} }
+#
+# Notes: This command is valid exactly when first connecting: it must be
+# issued before any other command will be accepted, and will fail once the
+# monitor is accepting other commands.
+#
+# Since: 0.13
+#
+##
+{ 'command': 'qmp_capabilities' }
+
##
# @LostTickPolicy:
#
diff --git a/qmp-commands.hx b/qmp-commands.hx
index c8d360a..13707ac 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -2209,7 +2209,7 @@ EQMP
.args_type = "",
.params = "",
.help = "enable QMP capabilities",
- .mhandler.cmd_new = qmp_capabilities,
+ .mhandler.cmd_new = qmp_marshal_qmp_capabilities,
},
SQMP
--
2.9.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [Qemu-devel] [PATCH v2 02/12] qapi-schema: add 'device_add'
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 01/12] qapi-schema: use generated marshaller for 'qmp_capabilities' marcandre.lureau
@ 2016-07-21 14:00 ` marcandre.lureau
2016-07-21 20:44 ` Eric Blake
2016-08-05 12:10 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 03/12] monitor: register gen:false commands manually marcandre.lureau
` (9 subsequent siblings)
11 siblings, 2 replies; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Even though device_add is not fully qapi'fied, we may add it to the json
schema with 'gen': false, so registration and documentation can be
generated.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
qapi-schema.json | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/qapi-schema.json b/qapi-schema.json
index 03c15d8..e950264 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -2200,6 +2200,35 @@
##
{ 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } }
+##
+# @device_add:
+#
+# @driver: the name of the new device's driver
+# @bus: #optional the device's parent bus (device tree path)
+# @id: the device's ID, must be unique
+# @props: #optional a dictionary of properties to be passed to the backend
+#
+# Add a device.
+#
+# Notes:
+# 1. For detailed information about this command, please refer to the
+# 'docs/qdev-device-use.txt' file.
+#
+# 2. It's possible to list device properties by running QEMU with the
+# "-device DEVICE,help" command-line argument, where DEVICE is the
+# device's name
+#
+# Example:
+#
+# -> { "execute": "device_add",
+# "arguments": { "driver": "e1000", "id": "net1" } }
+# <- { "return": {} }
+#
+# Since: 0.13
+##
+{ 'command': 'device_add',
+ 'data': {'driver': 'str', 'id': 'str'}, 'gen': false }
+
##
# @device_del:
#
--
2.9.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [Qemu-devel] [PATCH v2 03/12] monitor: register gen:false commands manually
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 01/12] qapi-schema: use generated marshaller for 'qmp_capabilities' marcandre.lureau
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 02/12] qapi-schema: add 'device_add' marcandre.lureau
@ 2016-07-21 14:00 ` marcandre.lureau
2016-07-21 20:50 ` Eric Blake
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 04/12] monitor: remove usage of generated marshal functions marcandre.lureau
` (8 subsequent siblings)
11 siblings, 1 reply; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Since a few commands are using 'gen': false, they are not registered
automatically by the generator. Register manually instead.
This is in preparation for removal of qapi 'middle' mode generation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
monitor.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/monitor.c b/monitor.c
index cb1a0c7..c9191e5 100644
--- a/monitor.c
+++ b/monitor.c
@@ -79,6 +79,7 @@
#include "sysemu/block-backend.h"
#include "sysemu/qtest.h"
#include "qemu/cutils.h"
+#include "qapi/qmp/dispatch.h"
/* for hmp_info_irq/pic */
#if defined(TARGET_SPARC)
@@ -1000,6 +1001,18 @@ static void qmp_query_qmp_schema(QDict *qdict, QObject **ret_data,
*ret_data = qobject_from_json(qmp_schema_json);
}
+static void qmp_init_marshal(void)
+{
+ qmp_register_command("query-qmp-schema", qmp_query_qmp_schema,
+ QCO_NO_OPTIONS);
+ qmp_register_command("device_add", qmp_device_add,
+ QCO_NO_OPTIONS);
+ qmp_register_command("netdev_add", qmp_netdev_add,
+ QCO_NO_OPTIONS);
+}
+
+qapi_init(qmp_init_marshal);
+
/* set the current CPU defined by the user */
int monitor_set_cpu(int cpu_index)
{
--
2.9.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [Qemu-devel] [PATCH v2 04/12] monitor: remove usage of generated marshal functions
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
` (2 preceding siblings ...)
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 03/12] monitor: register gen:false commands manually marcandre.lureau
@ 2016-07-21 14:00 ` marcandre.lureau
2016-08-05 12:17 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 05/12] monitor: register the qapi generated commands marcandre.lureau
` (7 subsequent siblings)
11 siblings, 1 reply; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Once the middle mode is removed, the generated marshal functions will no
longer be exported.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
monitor.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/monitor.c b/monitor.c
index c9191e5..3a28b43 100644
--- a/monitor.c
+++ b/monitor.c
@@ -3659,21 +3659,21 @@ static int monitor_can_read(void *opaque)
return (mon->suspend_cnt == 0) ? 1 : 0;
}
-static bool invalid_qmp_mode(const Monitor *mon, const mon_cmd_t *cmd,
+static bool invalid_qmp_mode(const Monitor *mon, const char *cmd,
Error **errp)
{
- bool is_cap = cmd->mhandler.cmd_new == qmp_marshal_qmp_capabilities;
+ bool is_cap = !g_strcmp0(cmd, "qmp_capabilities");
if (is_cap && mon->qmp.in_command_mode) {
error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,
"Capabilities negotiation is already complete, command "
- "'%s' ignored", cmd->name);
+ "'%s' ignored", cmd);
return true;
}
if (!is_cap && !mon->qmp.in_command_mode) {
error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,
"Expecting capabilities negotiation with "
- "'qmp_capabilities' before command '%s'", cmd->name);
+ "'qmp_capabilities' before command '%s'", cmd);
return true;
}
return false;
@@ -3964,7 +3964,7 @@ static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
"The command %s has not been found", cmd_name);
goto err_out;
}
- if (invalid_qmp_mode(mon, cmd, &local_err)) {
+ if (invalid_qmp_mode(mon, cmd_name, &local_err)) {
goto err_out;
}
--
2.9.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [Qemu-devel] [PATCH v2 05/12] monitor: register the qapi generated commands
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
` (3 preceding siblings ...)
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 04/12] monitor: remove usage of generated marshal functions marcandre.lureau
@ 2016-07-21 14:00 ` marcandre.lureau
2016-07-21 20:56 ` Eric Blake
2016-08-05 12:42 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 06/12] monitor: remove mhandler.cmd_new marcandre.lureau
` (6 subsequent siblings)
11 siblings, 2 replies; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Stop using the so-called 'middle' mode. Instead, use qmp_find_command()
from generated qapi commands registry.
Note: this commit requires a 'make clean' prior to make, since the
generated files do not depend on Makefile (due to a cyclic rule
introduced in 4115852bb0).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
monitor.c | 15 ++++--
Makefile | 2 +-
qmp-commands.hx | 143 --------------------------------------------------------
vl.c | 1 +
4 files changed, 13 insertions(+), 148 deletions(-)
diff --git a/monitor.c b/monitor.c
index 3a28b43..5bbe4bb 100644
--- a/monitor.c
+++ b/monitor.c
@@ -3934,6 +3934,7 @@ static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
QObject *obj, *data;
QDict *input, *args;
const mon_cmd_t *cmd;
+ QmpCommand *qcmd;
const char *cmd_name;
Monitor *mon = cur_mon;
@@ -3959,7 +3960,8 @@ static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
cmd_name = qdict_get_str(input, "execute");
trace_handle_qmp_command(mon, cmd_name);
cmd = qmp_find_cmd(cmd_name);
- if (!cmd) {
+ qcmd = qmp_find_command(cmd_name);
+ if (!qcmd || !cmd) {
error_set(&local_err, ERROR_CLASS_COMMAND_NOT_FOUND,
"The command %s has not been found", cmd_name);
goto err_out;
@@ -3981,7 +3983,7 @@ static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
goto err_out;
}
- cmd->mhandler.cmd_new(args, &data, &local_err);
+ qcmd->fn(args, &data, &local_err);
err_out:
monitor_protocol_emitter(mon, data, local_err);
@@ -4050,10 +4052,15 @@ void monitor_resume(Monitor *mon)
static QObject *get_qmp_greeting(void)
{
+ QmpCommand *cmd;
QObject *ver = NULL;
- qmp_marshal_query_version(NULL, &ver, NULL);
- return qobject_from_jsonf("{'QMP':{'version': %p,'capabilities': []}}",ver);
+ cmd = qmp_find_command("query-version");
+ assert(cmd && cmd->fn);
+ cmd->fn(NULL, &ver, NULL);
+
+ return qobject_from_jsonf("{'QMP':{'version': %p, 'capabilities': []}}",
+ ver);
}
static void monitor_qmp_event(void *opaque, int event)
diff --git a/Makefile b/Makefile
index 0d7647f..fcdc192 100644
--- a/Makefile
+++ b/Makefile
@@ -311,7 +311,7 @@ $(qapi-modules) $(SRC_PATH)/scripts/qapi-event.py $(qapi-py)
qmp-commands.h qmp-marshal.c :\
$(qapi-modules) $(SRC_PATH)/scripts/qapi-commands.py $(qapi-py)
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py \
- $(gen-out-type) -o "." -m $<, \
+ $(gen-out-type) -o "." $<, \
" GEN $@")
qmp-introspect.h qmp-introspect.c :\
$(qapi-modules) $(SRC_PATH)/scripts/qapi-introspect.py $(qapi-py)
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 13707ac..1ad8dda 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -63,7 +63,6 @@ EQMP
{
.name = "quit",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_quit,
},
SQMP
@@ -84,7 +83,6 @@ EQMP
{
.name = "eject",
.args_type = "force:-f,device:B",
- .mhandler.cmd_new = qmp_marshal_eject,
},
SQMP
@@ -110,7 +108,6 @@ EQMP
{
.name = "change",
.args_type = "device:B,target:F,arg:s?",
- .mhandler.cmd_new = qmp_marshal_change,
},
SQMP
@@ -146,7 +143,6 @@ EQMP
{
.name = "screendump",
.args_type = "filename:F",
- .mhandler.cmd_new = qmp_marshal_screendump,
},
SQMP
@@ -169,7 +165,6 @@ EQMP
{
.name = "stop",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_stop,
},
SQMP
@@ -190,7 +185,6 @@ EQMP
{
.name = "cont",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_cont,
},
SQMP
@@ -211,7 +205,6 @@ EQMP
{
.name = "system_wakeup",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_system_wakeup,
},
SQMP
@@ -232,7 +225,6 @@ EQMP
{
.name = "system_reset",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_system_reset,
},
SQMP
@@ -253,7 +245,6 @@ EQMP
{
.name = "system_powerdown",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_system_powerdown,
},
SQMP
@@ -276,7 +267,6 @@ EQMP
.args_type = "device:O",
.params = "driver[,prop=value][,...]",
.help = "add device, like -device on the command line",
- .mhandler.cmd_new = qmp_device_add,
},
SQMP
@@ -310,7 +300,6 @@ EQMP
{
.name = "device_del",
.args_type = "id:s",
- .mhandler.cmd_new = qmp_marshal_device_del,
},
SQMP
@@ -338,7 +327,6 @@ EQMP
{
.name = "send-key",
.args_type = "keys:q,hold-time:i?",
- .mhandler.cmd_new = qmp_marshal_send_key,
},
SQMP
@@ -369,7 +357,6 @@ EQMP
{
.name = "cpu",
.args_type = "index:i",
- .mhandler.cmd_new = qmp_marshal_cpu,
},
SQMP
@@ -394,7 +381,6 @@ EQMP
{
.name = "cpu-add",
.args_type = "id:i",
- .mhandler.cmd_new = qmp_marshal_cpu_add,
},
SQMP
@@ -417,7 +403,6 @@ EQMP
{
.name = "memsave",
.args_type = "val:l,size:i,filename:s,cpu:i?",
- .mhandler.cmd_new = qmp_marshal_memsave,
},
SQMP
@@ -446,7 +431,6 @@ EQMP
{
.name = "pmemsave",
.args_type = "val:l,size:i,filename:s",
- .mhandler.cmd_new = qmp_marshal_pmemsave,
},
SQMP
@@ -474,7 +458,6 @@ EQMP
{
.name = "inject-nmi",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_inject_nmi,
},
SQMP
@@ -497,7 +480,6 @@ EQMP
{
.name = "ringbuf-write",
.args_type = "device:s,data:s,format:s?",
- .mhandler.cmd_new = qmp_marshal_ringbuf_write,
},
SQMP
@@ -526,7 +508,6 @@ EQMP
{
.name = "ringbuf-read",
.args_type = "device:s,size:i,format:s?",
- .mhandler.cmd_new = qmp_marshal_ringbuf_read,
},
SQMP
@@ -562,7 +543,6 @@ EQMP
{
.name = "xen-save-devices-state",
.args_type = "filename:F",
- .mhandler.cmd_new = qmp_marshal_xen_save_devices_state,
},
SQMP
@@ -589,7 +569,6 @@ EQMP
{
.name = "xen-load-devices-state",
.args_type = "filename:F",
- .mhandler.cmd_new = qmp_marshal_xen_load_devices_state,
},
SQMP
@@ -616,7 +595,6 @@ EQMP
{
.name = "xen-set-global-dirty-log",
.args_type = "enable:b",
- .mhandler.cmd_new = qmp_marshal_xen_set_global_dirty_log,
},
SQMP
@@ -640,7 +618,6 @@ EQMP
{
.name = "migrate",
.args_type = "detach:-d,blk:-b,inc:-i,uri:s",
- .mhandler.cmd_new = qmp_marshal_migrate,
},
SQMP
@@ -673,7 +650,6 @@ EQMP
{
.name = "migrate_cancel",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_migrate_cancel,
},
SQMP
@@ -694,7 +670,6 @@ EQMP
{
.name = "migrate-incoming",
.args_type = "uri:s",
- .mhandler.cmd_new = qmp_marshal_migrate_incoming,
},
SQMP
@@ -722,7 +697,6 @@ EQMP
{
.name = "migrate-set-cache-size",
.args_type = "value:o",
- .mhandler.cmd_new = qmp_marshal_migrate_set_cache_size,
},
SQMP
@@ -745,7 +719,6 @@ EQMP
{
.name = "migrate-start-postcopy",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_migrate_start_postcopy,
},
SQMP
@@ -764,7 +737,6 @@ EQMP
{
.name = "query-migrate-cache-size",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_migrate_cache_size,
},
SQMP
@@ -786,7 +758,6 @@ EQMP
{
.name = "migrate_set_speed",
.args_type = "value:o",
- .mhandler.cmd_new = qmp_marshal_migrate_set_speed,
},
SQMP
@@ -809,7 +780,6 @@ EQMP
{
.name = "migrate_set_downtime",
.args_type = "value:T",
- .mhandler.cmd_new = qmp_marshal_migrate_set_downtime,
},
SQMP
@@ -834,7 +804,6 @@ EQMP
.args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
.params = "protocol hostname port tls-port cert-subject",
.help = "set migration information for remote display",
- .mhandler.cmd_new = qmp_marshal_client_migrate_info,
},
SQMP
@@ -868,7 +837,6 @@ EQMP
.args_type = "paging:b,protocol:s,detach:b?,begin:i?,end:i?,format:s?",
.params = "-p protocol [-d] [begin] [length] [format]",
.help = "dump guest memory to file",
- .mhandler.cmd_new = qmp_marshal_dump_guest_memory,
},
SQMP
@@ -907,7 +875,6 @@ EQMP
{
.name = "query-dump-guest-memory-capability",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_dump_guest_memory_capability,
},
SQMP
@@ -929,7 +896,6 @@ EQMP
.args_type = "",
.params = "",
.help = "query background dump status",
- .mhandler.cmd_new = qmp_marshal_query_dump,
},
SQMP
@@ -952,7 +918,6 @@ EQMP
{
.name = "dump-skeys",
.args_type = "filename:F",
- .mhandler.cmd_new = qmp_marshal_dump_skeys,
},
#endif
@@ -976,7 +941,6 @@ EQMP
{
.name = "netdev_add",
.args_type = "netdev:O",
- .mhandler.cmd_new = qmp_netdev_add,
},
SQMP
@@ -1007,7 +971,6 @@ EQMP
{
.name = "netdev_del",
.args_type = "id:s",
- .mhandler.cmd_new = qmp_marshal_netdev_del,
},
SQMP
@@ -1031,7 +994,6 @@ EQMP
{
.name = "object-add",
.args_type = "qom-type:s,id:s,props:q?",
- .mhandler.cmd_new = qmp_marshal_object_add,
},
SQMP
@@ -1057,7 +1019,6 @@ EQMP
{
.name = "object-del",
.args_type = "id:s",
- .mhandler.cmd_new = qmp_marshal_object_del,
},
SQMP
@@ -1082,7 +1043,6 @@ EQMP
{
.name = "block_resize",
.args_type = "device:s?,node-name:s?,size:o",
- .mhandler.cmd_new = qmp_marshal_block_resize,
},
SQMP
@@ -1107,7 +1067,6 @@ EQMP
{
.name = "block-stream",
.args_type = "job-id:s?,device:B,base:s?,speed:o?,backing-file:s?,on-error:s?",
- .mhandler.cmd_new = qmp_marshal_block_stream,
},
SQMP
@@ -1152,7 +1111,6 @@ EQMP
{
.name = "block-commit",
.args_type = "job-id:s?,device:B,base:s?,top:s?,backing-file:s?,speed:o?",
- .mhandler.cmd_new = qmp_marshal_block_commit,
},
SQMP
@@ -1218,7 +1176,6 @@ EQMP
.name = "drive-backup",
.args_type = "job-id:s?,sync:s,device:B,target:s,speed:i?,mode:s?,"
"format:s?,bitmap:s?,on-source-error:s?,on-target-error:s?",
- .mhandler.cmd_new = qmp_marshal_drive_backup,
},
SQMP
@@ -1274,7 +1231,6 @@ EQMP
.name = "blockdev-backup",
.args_type = "job-id:s?,sync:s,device:B,target:B,speed:i?,"
"on-source-error:s?,on-target-error:s?",
- .mhandler.cmd_new = qmp_marshal_blockdev_backup,
},
SQMP
@@ -1316,33 +1272,27 @@ EQMP
{
.name = "block-job-set-speed",
.args_type = "device:B,speed:o",
- .mhandler.cmd_new = qmp_marshal_block_job_set_speed,
},
{
.name = "block-job-cancel",
.args_type = "device:B,force:b?",
- .mhandler.cmd_new = qmp_marshal_block_job_cancel,
},
{
.name = "block-job-pause",
.args_type = "device:B",
- .mhandler.cmd_new = qmp_marshal_block_job_pause,
},
{
.name = "block-job-resume",
.args_type = "device:B",
- .mhandler.cmd_new = qmp_marshal_block_job_resume,
},
{
.name = "block-job-complete",
.args_type = "device:B",
- .mhandler.cmd_new = qmp_marshal_block_job_complete,
},
{
.name = "transaction",
.args_type = "actions:q,properties:q?",
- .mhandler.cmd_new = qmp_marshal_transaction,
},
SQMP
@@ -1436,7 +1386,6 @@ EQMP
{
.name = "block-dirty-bitmap-add",
.args_type = "node:B,name:s,granularity:i?",
- .mhandler.cmd_new = qmp_marshal_block_dirty_bitmap_add,
},
SQMP
@@ -1464,7 +1413,6 @@ EQMP
{
.name = "block-dirty-bitmap-remove",
.args_type = "node:B,name:s",
- .mhandler.cmd_new = qmp_marshal_block_dirty_bitmap_remove,
},
SQMP
@@ -1492,7 +1440,6 @@ EQMP
{
.name = "block-dirty-bitmap-clear",
.args_type = "node:B,name:s",
- .mhandler.cmd_new = qmp_marshal_block_dirty_bitmap_clear,
},
SQMP
@@ -1521,7 +1468,6 @@ EQMP
{
.name = "blockdev-snapshot-sync",
.args_type = "device:s?,node-name:s?,snapshot-file:s,snapshot-node-name:s?,format:s?,mode:s?",
- .mhandler.cmd_new = qmp_marshal_blockdev_snapshot_sync,
},
SQMP
@@ -1557,7 +1503,6 @@ EQMP
{
.name = "blockdev-snapshot",
.args_type = "node:s,overlay:s",
- .mhandler.cmd_new = qmp_marshal_blockdev_snapshot,
},
SQMP
@@ -1595,7 +1540,6 @@ EQMP
{
.name = "blockdev-snapshot-internal-sync",
.args_type = "device:B,name:s",
- .mhandler.cmd_new = qmp_marshal_blockdev_snapshot_internal_sync,
},
SQMP
@@ -1624,8 +1568,6 @@ EQMP
{
.name = "blockdev-snapshot-delete-internal-sync",
.args_type = "device:B,id:s?,name:s?",
- .mhandler.cmd_new =
- qmp_marshal_blockdev_snapshot_delete_internal_sync,
},
SQMP
@@ -1669,7 +1611,6 @@ EQMP
"on-source-error:s?,on-target-error:s?,"
"unmap:b?,"
"granularity:i?,buf-size:i?",
- .mhandler.cmd_new = qmp_marshal_drive_mirror,
},
SQMP
@@ -1733,7 +1674,6 @@ EQMP
.args_type = "job-id:s?,sync:s,device:B,target:B,replaces:s?,speed:i?,"
"on-source-error:s?,on-target-error:s?,"
"granularity:i?,buf-size:i?",
- .mhandler.cmd_new = qmp_marshal_blockdev_mirror,
},
SQMP
@@ -1781,7 +1721,6 @@ EQMP
{
.name = "change-backing-file",
.args_type = "device:s,image-node-name:s,backing-file:s",
- .mhandler.cmd_new = qmp_marshal_change_backing_file,
},
SQMP
@@ -1820,7 +1759,6 @@ EQMP
{
.name = "balloon",
.args_type = "value:M",
- .mhandler.cmd_new = qmp_marshal_balloon,
},
SQMP
@@ -1843,7 +1781,6 @@ EQMP
{
.name = "set_link",
.args_type = "name:s,up:b",
- .mhandler.cmd_new = qmp_marshal_set_link,
},
SQMP
@@ -1869,7 +1806,6 @@ EQMP
.args_type = "fdname:s",
.params = "getfd name",
.help = "receive a file descriptor via SCM rights and assign it a name",
- .mhandler.cmd_new = qmp_marshal_getfd,
},
SQMP
@@ -1902,7 +1838,6 @@ EQMP
.args_type = "fdname:s",
.params = "closefd name",
.help = "close a file descriptor previously passed via SCM rights",
- .mhandler.cmd_new = qmp_marshal_closefd,
},
SQMP
@@ -1927,7 +1862,6 @@ EQMP
.args_type = "fdset-id:i?,opaque:s?",
.params = "add-fd fdset-id opaque",
.help = "Add a file descriptor, that was passed via SCM rights, to an fd set",
- .mhandler.cmd_new = qmp_marshal_add_fd,
},
SQMP
@@ -1966,7 +1900,6 @@ EQMP
.args_type = "fdset-id:i,fd:i?",
.params = "remove-fd fdset-id fd",
.help = "Remove a file descriptor from an fd set",
- .mhandler.cmd_new = qmp_marshal_remove_fd,
},
SQMP
@@ -1998,7 +1931,6 @@ EQMP
.name = "query-fdsets",
.args_type = "",
.help = "Return information describing all fd sets",
- .mhandler.cmd_new = qmp_marshal_query_fdsets,
},
SQMP
@@ -2047,7 +1979,6 @@ EQMP
{
.name = "block_passwd",
.args_type = "device:s?,node-name:s?,password:s",
- .mhandler.cmd_new = qmp_marshal_block_passwd,
},
SQMP
@@ -2073,7 +2004,6 @@ EQMP
{
.name = "block_set_io_throttle",
.args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l,bps_max:l?,bps_rd_max:l?,bps_wr_max:l?,iops_max:l?,iops_rd_max:l?,iops_wr_max:l?,bps_max_length:l?,bps_rd_max_length:l?,bps_wr_max_length:l?,iops_max_length:l?,iops_rd_max_length:l?,iops_wr_max_length:l?,iops_size:l?,group:s?",
- .mhandler.cmd_new = qmp_marshal_block_set_io_throttle,
},
SQMP
@@ -2130,7 +2060,6 @@ EQMP
{
.name = "set_password",
.args_type = "protocol:s,password:s,connected:s?",
- .mhandler.cmd_new = qmp_marshal_set_password,
},
SQMP
@@ -2156,7 +2085,6 @@ EQMP
{
.name = "expire_password",
.args_type = "protocol:s,time:s",
- .mhandler.cmd_new = qmp_marshal_expire_password,
},
SQMP
@@ -2181,7 +2109,6 @@ EQMP
{
.name = "add_client",
.args_type = "protocol:s,fdname:s,skipauth:b?,tls:b?",
- .mhandler.cmd_new = qmp_marshal_add_client,
},
SQMP
@@ -2209,7 +2136,6 @@ EQMP
.args_type = "",
.params = "",
.help = "enable QMP capabilities",
- .mhandler.cmd_new = qmp_marshal_qmp_capabilities,
},
SQMP
@@ -2232,7 +2158,6 @@ EQMP
{
.name = "human-monitor-command",
.args_type = "command-line:s,cpu-index:i?",
- .mhandler.cmd_new = qmp_marshal_human_monitor_command,
},
SQMP
@@ -2311,7 +2236,6 @@ EQMP
{
.name = "query-version",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_version,
},
SQMP
@@ -2348,7 +2272,6 @@ EQMP
{
.name = "query-commands",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_commands,
},
SQMP
@@ -2385,7 +2308,6 @@ EQMP
{
.name = "query-events",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_events,
},
SQMP
@@ -2402,7 +2324,6 @@ EQMP
{
.name = "query-qmp-schema",
.args_type = "",
- .mhandler.cmd_new = qmp_query_qmp_schema,
},
SQMP
@@ -2447,7 +2368,6 @@ EQMP
{
.name = "query-chardev",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_chardev,
},
SQMP
@@ -2488,7 +2408,6 @@ EQMP
{
.name = "query-chardev-backends",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_chardev_backends,
},
SQMP
@@ -2672,7 +2591,6 @@ EQMP
{
.name = "query-block",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_block,
},
SQMP
@@ -2869,7 +2787,6 @@ EQMP
{
.name = "query-blockstats",
.args_type = "query-nodes:b?",
- .mhandler.cmd_new = qmp_marshal_query_blockstats,
},
SQMP
@@ -2924,7 +2841,6 @@ EQMP
{
.name = "query-cpus",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_cpus,
},
SQMP
@@ -2963,7 +2879,6 @@ EQMP
{
.name = "query-iothreads",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_iothreads,
},
SQMP
@@ -3180,7 +3095,6 @@ EQMP
{
.name = "query-pci",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_pci,
},
SQMP
@@ -3204,7 +3118,6 @@ EQMP
{
.name = "query-kvm",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_kvm,
},
SQMP
@@ -3244,7 +3157,6 @@ EQMP
{
.name = "query-status",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_status,
},
SQMP
@@ -3288,7 +3200,6 @@ EQMP
{
.name = "query-mice",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_mice,
},
SQMP
@@ -3351,12 +3262,10 @@ EQMP
{
.name = "query-vnc",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_vnc,
},
{
.name = "query-vnc-servers",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_vnc_servers,
},
SQMP
@@ -3433,7 +3342,6 @@ EQMP
{
.name = "query-spice",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_spice,
},
#endif
@@ -3457,7 +3365,6 @@ EQMP
{
.name = "query-name",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_name,
},
SQMP
@@ -3480,7 +3387,6 @@ EQMP
{
.name = "query-uuid",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_uuid,
},
SQMP
@@ -3529,7 +3435,6 @@ EQMP
{
.name = "query-command-line-options",
.args_type = "option:s?",
- .mhandler.cmd_new = qmp_marshal_query_command_line_options,
},
SQMP
@@ -3707,7 +3612,6 @@ EQMP
{
.name = "query-migrate",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_migrate,
},
SQMP
@@ -3737,7 +3641,6 @@ EQMP
.name = "migrate-set-capabilities",
.args_type = "capabilities:q",
.params = "capability:s,state:b",
- .mhandler.cmd_new = qmp_marshal_migrate_set_capabilities,
},
SQMP
query-migrate-capabilities
@@ -3774,7 +3677,6 @@ EQMP
{
.name = "query-migrate-capabilities",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_migrate_capabilities,
},
SQMP
@@ -3804,7 +3706,6 @@ EQMP
.name = "migrate-set-parameters",
.args_type =
"compress-level:i?,compress-threads:i?,decompress-threads:i?,cpu-throttle-initial:i?,cpu-throttle-increment:i?",
- .mhandler.cmd_new = qmp_marshal_migrate_set_parameters,
},
SQMP
query-migrate-parameters
@@ -3841,7 +3742,6 @@ EQMP
{
.name = "query-migrate-parameters",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_migrate_parameters,
},
SQMP
@@ -3869,88 +3769,73 @@ EQMP
{
.name = "query-balloon",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_balloon,
},
{
.name = "query-block-jobs",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_block_jobs,
},
{
.name = "qom-list",
.args_type = "path:s",
- .mhandler.cmd_new = qmp_marshal_qom_list,
},
{
.name = "qom-set",
.args_type = "path:s,property:s,value:q",
- .mhandler.cmd_new = qmp_marshal_qom_set,
},
{
.name = "qom-get",
.args_type = "path:s,property:s",
- .mhandler.cmd_new = qmp_marshal_qom_get,
},
{
.name = "nbd-server-start",
.args_type = "addr:q,tls-creds:s?",
- .mhandler.cmd_new = qmp_marshal_nbd_server_start,
},
{
.name = "nbd-server-add",
.args_type = "device:B,writable:b?",
- .mhandler.cmd_new = qmp_marshal_nbd_server_add,
},
{
.name = "nbd-server-stop",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_nbd_server_stop,
},
{
.name = "change-vnc-password",
.args_type = "password:s",
- .mhandler.cmd_new = qmp_marshal_change_vnc_password,
},
{
.name = "qom-list-types",
.args_type = "implements:s?,abstract:b?",
- .mhandler.cmd_new = qmp_marshal_qom_list_types,
},
{
.name = "device-list-properties",
.args_type = "typename:s",
- .mhandler.cmd_new = qmp_marshal_device_list_properties,
},
{
.name = "query-machines",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_machines,
},
{
.name = "query-cpu-definitions",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_cpu_definitions,
},
{
.name = "query-target",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_target,
},
{
.name = "query-tpm",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_tpm,
},
SQMP
@@ -3984,7 +3869,6 @@ EQMP
{
.name = "query-tpm-models",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_tpm_models,
},
SQMP
@@ -4005,7 +3889,6 @@ EQMP
{
.name = "query-tpm-types",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_tpm_types,
},
SQMP
@@ -4026,7 +3909,6 @@ EQMP
{
.name = "chardev-add",
.args_type = "id:s,backend:q",
- .mhandler.cmd_new = qmp_marshal_chardev_add,
},
SQMP
@@ -4063,7 +3945,6 @@ EQMP
{
.name = "chardev-remove",
.args_type = "id:s",
- .mhandler.cmd_new = qmp_marshal_chardev_remove,
},
@@ -4086,7 +3967,6 @@ EQMP
{
.name = "query-rx-filter",
.args_type = "name:s?",
- .mhandler.cmd_new = qmp_marshal_query_rx_filter,
},
SQMP
@@ -4152,7 +4032,6 @@ EQMP
{
.name = "blockdev-add",
.args_type = "options:q",
- .mhandler.cmd_new = qmp_marshal_blockdev_add,
},
SQMP
@@ -4211,7 +4090,6 @@ EQMP
{
.name = "x-blockdev-del",
.args_type = "id:s?,node-name:s?",
- .mhandler.cmd_new = qmp_marshal_x_blockdev_del,
},
SQMP
@@ -4268,7 +4146,6 @@ EQMP
{
.name = "blockdev-open-tray",
.args_type = "device:s,force:b?",
- .mhandler.cmd_new = qmp_marshal_blockdev_open_tray,
},
SQMP
@@ -4316,7 +4193,6 @@ EQMP
{
.name = "blockdev-close-tray",
.args_type = "device:s",
- .mhandler.cmd_new = qmp_marshal_blockdev_close_tray,
},
SQMP
@@ -4351,7 +4227,6 @@ EQMP
{
.name = "x-blockdev-remove-medium",
.args_type = "device:s",
- .mhandler.cmd_new = qmp_marshal_x_blockdev_remove_medium,
},
SQMP
@@ -4399,7 +4274,6 @@ EQMP
{
.name = "x-blockdev-insert-medium",
.args_type = "device:s,node-name:s",
- .mhandler.cmd_new = qmp_marshal_x_blockdev_insert_medium,
},
SQMP
@@ -4439,7 +4313,6 @@ EQMP
{
.name = "x-blockdev-change",
.args_type = "parent:B,child:B?,node:B?",
- .mhandler.cmd_new = qmp_marshal_x_blockdev_change,
},
SQMP
@@ -4492,7 +4365,6 @@ EQMP
{
.name = "query-named-block-nodes",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_named_block_nodes,
},
SQMP
@@ -4554,7 +4426,6 @@ EQMP
{
.name = "blockdev-change-medium",
.args_type = "device:B,filename:F,format:s?,read-only-mode:s?",
- .mhandler.cmd_new = qmp_marshal_blockdev_change_medium,
},
SQMP
@@ -4607,7 +4478,6 @@ EQMP
{
.name = "query-memdev",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_memdev,
},
SQMP
@@ -4645,7 +4515,6 @@ EQMP
{
.name = "query-memory-devices",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_memory_devices,
},
SQMP
@@ -4672,7 +4541,6 @@ EQMP
{
.name = "query-acpi-ospm-status",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_acpi_ospm_status,
},
SQMP
@@ -4695,7 +4563,6 @@ EQMP
{
.name = "rtc-reset-reinjection",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_rtc_reset_reinjection,
},
#endif
@@ -4716,7 +4583,6 @@ EQMP
{
.name = "trace-event-get-state",
.args_type = "name:s,vcpu:i?",
- .mhandler.cmd_new = qmp_marshal_trace_event_get_state,
},
SQMP
@@ -4748,7 +4614,6 @@ EQMP
{
.name = "trace-event-set-state",
.args_type = "name:s,enable:b,ignore-unavailable:b?,vcpu:i?",
- .mhandler.cmd_new = qmp_marshal_trace_event_set_state,
},
SQMP
@@ -4783,7 +4648,6 @@ EQMP
{
.name = "input-send-event",
.args_type = "console:i?,events:q",
- .mhandler.cmd_new = qmp_marshal_input_send_event,
},
SQMP
@@ -4849,7 +4713,6 @@ EQMP
{
.name = "block-set-write-threshold",
.args_type = "node-name:s,write-threshold:l",
- .mhandler.cmd_new = qmp_marshal_block_set_write_threshold,
},
SQMP
@@ -4877,7 +4740,6 @@ EQMP
{
.name = "query-rocker",
.args_type = "name:s",
- .mhandler.cmd_new = qmp_marshal_query_rocker,
},
SQMP
@@ -4898,7 +4760,6 @@ EQMP
{
.name = "query-rocker-ports",
.args_type = "name:s",
- .mhandler.cmd_new = qmp_marshal_query_rocker_ports,
},
SQMP
@@ -4923,7 +4784,6 @@ EQMP
{
.name = "query-rocker-of-dpa-flows",
.args_type = "name:s,tbl-id:i?",
- .mhandler.cmd_new = qmp_marshal_query_rocker_of_dpa_flows,
},
SQMP
@@ -4952,7 +4812,6 @@ EQMP
{
.name = "query-rocker-of-dpa-groups",
.args_type = "name:s,type:i?",
- .mhandler.cmd_new = qmp_marshal_query_rocker_of_dpa_groups,
},
SQMP
@@ -4983,7 +4842,6 @@ EQMP
{
.name = "query-gic-capabilities",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_gic_capabilities,
},
#endif
@@ -5007,7 +4865,6 @@ EQMP
{
.name = "query-hotpluggable-cpus",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_hotpluggable_cpus,
},
SQMP
diff --git a/vl.c b/vl.c
index a455947..a819e05 100644
--- a/vl.c
+++ b/vl.c
@@ -2971,6 +2971,7 @@ int main(int argc, char **argv, char **envp)
qemu_init_exec_dir(argv[0]);
module_call_init(MODULE_INIT_QOM);
+ module_call_init(MODULE_INIT_QAPI);
qemu_add_opts(&qemu_drive_opts);
qemu_add_drive_opts(&qemu_legacy_drive_opts);
--
2.9.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [Qemu-devel] [PATCH v2 06/12] monitor: remove mhandler.cmd_new
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
` (4 preceding siblings ...)
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 05/12] monitor: register the qapi generated commands marcandre.lureau
@ 2016-07-21 14:00 ` marcandre.lureau
2016-07-21 21:02 ` Eric Blake
2016-08-05 12:52 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 07/12] monitor: implement 'qmp_query_commands' without qmp_cmds marcandre.lureau
` (5 subsequent siblings)
11 siblings, 2 replies; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
This is no longer necessary, now that middle mode has been removed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
monitor.c | 13 +--
docs/writing-qmp-commands.txt | 8 +-
hmp-commands-info.hx | 118 ++++++++++++------------
hmp-commands.hx | 208 +++++++++++++++++++++---------------------
4 files changed, 170 insertions(+), 177 deletions(-)
diff --git a/monitor.c b/monitor.c
index 5bbe4bb..642be2e 100644
--- a/monitor.c
+++ b/monitor.c
@@ -130,13 +130,10 @@ typedef struct mon_cmd_t {
const char *args_type;
const char *params;
const char *help;
- union {
- void (*cmd)(Monitor *mon, const QDict *qdict);
- void (*cmd_new)(QDict *params, QObject **ret_data, Error **errp);
- } mhandler;
- /* @sub_table is a list of 2nd level of commands. If it do not exist,
- * mhandler should be used. If it exist, sub_table[?].mhandler should be
- * used, and mhandler of 1st level plays the role of help function.
+ void (*cmd)(Monitor *mon, const QDict *qdict);
+ /* @sub_table is a list of 2nd level of commands. If it does not exist,
+ * cmd should be used. If it exists, sub_table[?].cmd should be
+ * used, and cmd of 1st level plays the role of help function.
*/
struct mon_cmd_t *sub_table;
void (*command_completion)(ReadLineState *rs, int nb_args, const char *str);
@@ -2960,7 +2957,7 @@ static void handle_hmp_command(Monitor *mon, const char *cmdline)
return;
}
- cmd->mhandler.cmd(mon, qdict);
+ cmd->cmd(mon, qdict);
QDECREF(qdict);
}
diff --git a/docs/writing-qmp-commands.txt b/docs/writing-qmp-commands.txt
index 59aa77a..6208715 100644
--- a/docs/writing-qmp-commands.txt
+++ b/docs/writing-qmp-commands.txt
@@ -127,7 +127,6 @@ following at the bottom:
{
.name = "hello-world",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_hello_world,
},
You're done. Now build qemu, run it as suggested in the "Testing" section,
@@ -179,7 +178,6 @@ The last step is to update the qmp-commands.hx file:
{
.name = "hello-world",
.args_type = "message:s?",
- .mhandler.cmd_new = qmp_marshal_hello_world,
},
Notice that the "args_type" member got our "message" argument. The character
@@ -337,7 +335,7 @@ we should add it to the hmp-commands.hx file:
.args_type = "message:s?",
.params = "hello-world [message]",
.help = "Print message to the standard output",
- .mhandler.cmd = hmp_hello_world,
+ .cmd = hmp_hello_world,
},
STEXI
@@ -459,7 +457,6 @@ The last step is to add the correspoding entry in the qmp-commands.hx file:
{
.name = "query-alarm-clock",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_alarm_clock,
},
Time to test the new command. Build qemu, run it as described in the "Testing"
@@ -518,7 +515,7 @@ in the monitor.c file. The entry for the "info alarmclock" follows:
.args_type = "",
.params = "",
.help = "show information about the alarm clock",
- .mhandler.info = hmp_info_alarm_clock,
+ .cmd = hmp_info_alarm_clock,
},
To test this, run qemu and type "info alarmclock" in the user monitor.
@@ -605,7 +602,6 @@ To test this you have to add the corresponding qmp-commands.hx entry:
{
.name = "query-alarm-methods",
.args_type = "",
- .mhandler.cmd_new = qmp_marshal_query_alarm_methods,
},
Now Build qemu, run it as explained in the "Testing" section and try our new
diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
index 74446c6..19729e5 100644
--- a/hmp-commands-info.hx
+++ b/hmp-commands-info.hx
@@ -18,7 +18,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the version of QEMU",
- .mhandler.cmd = hmp_info_version,
+ .cmd = hmp_info_version,
},
STEXI
@@ -32,7 +32,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the network state",
- .mhandler.cmd = hmp_info_network,
+ .cmd = hmp_info_network,
},
STEXI
@@ -46,7 +46,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the character devices",
- .mhandler.cmd = hmp_info_chardev,
+ .cmd = hmp_info_chardev,
},
STEXI
@@ -61,7 +61,7 @@ ETEXI
.params = "[-n] [-v] [device]",
.help = "show info of one block device or all block devices "
"(-n: show named nodes; -v: show details)",
- .mhandler.cmd = hmp_info_block,
+ .cmd = hmp_info_block,
},
STEXI
@@ -75,7 +75,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show block device statistics",
- .mhandler.cmd = hmp_info_blockstats,
+ .cmd = hmp_info_blockstats,
},
STEXI
@@ -89,7 +89,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show progress of ongoing block device operations",
- .mhandler.cmd = hmp_info_block_jobs,
+ .cmd = hmp_info_block_jobs,
},
STEXI
@@ -103,7 +103,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the cpu registers",
- .mhandler.cmd = hmp_info_registers,
+ .cmd = hmp_info_registers,
},
STEXI
@@ -118,7 +118,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show local apic state",
- .mhandler.cmd = hmp_info_local_apic,
+ .cmd = hmp_info_local_apic,
},
#endif
@@ -134,7 +134,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show io apic state",
- .mhandler.cmd = hmp_info_io_apic,
+ .cmd = hmp_info_io_apic,
},
#endif
@@ -149,7 +149,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show infos for each CPU",
- .mhandler.cmd = hmp_info_cpus,
+ .cmd = hmp_info_cpus,
},
STEXI
@@ -163,7 +163,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the command line history",
- .mhandler.cmd = hmp_info_history,
+ .cmd = hmp_info_history,
},
STEXI
@@ -180,11 +180,11 @@ ETEXI
.params = "",
.help = "show the interrupts statistics (if available)",
#ifdef TARGET_SPARC
- .mhandler.cmd = sun4m_hmp_info_irq,
+ .cmd = sun4m_hmp_info_irq,
#elif defined(TARGET_LM32)
- .mhandler.cmd = lm32_hmp_info_irq,
+ .cmd = lm32_hmp_info_irq,
#else
- .mhandler.cmd = hmp_info_irq,
+ .cmd = hmp_info_irq,
#endif
},
@@ -200,11 +200,11 @@ ETEXI
.params = "",
.help = "show i8259 (PIC) state",
#ifdef TARGET_SPARC
- .mhandler.cmd = sun4m_hmp_info_pic,
+ .cmd = sun4m_hmp_info_pic,
#elif defined(TARGET_LM32)
- .mhandler.cmd = lm32_hmp_info_pic,
+ .cmd = lm32_hmp_info_pic,
#else
- .mhandler.cmd = hmp_info_pic,
+ .cmd = hmp_info_pic,
#endif
},
#endif
@@ -220,7 +220,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show PCI info",
- .mhandler.cmd = hmp_info_pci,
+ .cmd = hmp_info_pci,
},
STEXI
@@ -236,7 +236,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show virtual to physical memory mappings",
- .mhandler.cmd = hmp_info_tlb,
+ .cmd = hmp_info_tlb,
},
#endif
@@ -252,7 +252,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the active virtual memory mappings",
- .mhandler.cmd = hmp_info_mem,
+ .cmd = hmp_info_mem,
},
#endif
@@ -267,7 +267,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show memory tree",
- .mhandler.cmd = hmp_info_mtree,
+ .cmd = hmp_info_mtree,
},
STEXI
@@ -281,7 +281,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show dynamic compiler info",
- .mhandler.cmd = hmp_info_jit,
+ .cmd = hmp_info_jit,
},
STEXI
@@ -295,7 +295,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show dynamic compiler opcode counters",
- .mhandler.cmd = hmp_info_opcount,
+ .cmd = hmp_info_opcount,
},
STEXI
@@ -309,7 +309,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show KVM information",
- .mhandler.cmd = hmp_info_kvm,
+ .cmd = hmp_info_kvm,
},
STEXI
@@ -323,7 +323,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show NUMA information",
- .mhandler.cmd = hmp_info_numa,
+ .cmd = hmp_info_numa,
},
STEXI
@@ -337,7 +337,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show guest USB devices",
- .mhandler.cmd = hmp_info_usb,
+ .cmd = hmp_info_usb,
},
STEXI
@@ -351,7 +351,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show host USB devices",
- .mhandler.cmd = hmp_info_usbhost,
+ .cmd = hmp_info_usbhost,
},
STEXI
@@ -365,7 +365,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show profiling information",
- .mhandler.cmd = hmp_info_profile,
+ .cmd = hmp_info_profile,
},
STEXI
@@ -379,7 +379,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show capture information",
- .mhandler.cmd = hmp_info_capture,
+ .cmd = hmp_info_capture,
},
STEXI
@@ -393,7 +393,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the currently saved VM snapshots",
- .mhandler.cmd = hmp_info_snapshots,
+ .cmd = hmp_info_snapshots,
},
STEXI
@@ -407,7 +407,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the current VM status (running|paused)",
- .mhandler.cmd = hmp_info_status,
+ .cmd = hmp_info_status,
},
STEXI
@@ -421,7 +421,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show which guest mouse is receiving events",
- .mhandler.cmd = hmp_info_mice,
+ .cmd = hmp_info_mice,
},
STEXI
@@ -435,7 +435,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the vnc server status",
- .mhandler.cmd = hmp_info_vnc,
+ .cmd = hmp_info_vnc,
},
STEXI
@@ -450,7 +450,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the spice server status",
- .mhandler.cmd = hmp_info_spice,
+ .cmd = hmp_info_spice,
},
#endif
@@ -465,7 +465,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the current VM name",
- .mhandler.cmd = hmp_info_name,
+ .cmd = hmp_info_name,
},
STEXI
@@ -479,7 +479,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the current VM UUID",
- .mhandler.cmd = hmp_info_uuid,
+ .cmd = hmp_info_uuid,
},
STEXI
@@ -493,7 +493,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show CPU statistics",
- .mhandler.cmd = hmp_info_cpustats,
+ .cmd = hmp_info_cpustats,
},
STEXI
@@ -508,7 +508,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show user network stack connection states",
- .mhandler.cmd = hmp_info_usernet,
+ .cmd = hmp_info_usernet,
},
#endif
@@ -523,7 +523,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show migration status",
- .mhandler.cmd = hmp_info_migrate,
+ .cmd = hmp_info_migrate,
},
STEXI
@@ -537,7 +537,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show current migration capabilities",
- .mhandler.cmd = hmp_info_migrate_capabilities,
+ .cmd = hmp_info_migrate_capabilities,
},
STEXI
@@ -551,7 +551,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show current migration parameters",
- .mhandler.cmd = hmp_info_migrate_parameters,
+ .cmd = hmp_info_migrate_parameters,
},
STEXI
@@ -565,7 +565,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show current migration xbzrle cache size",
- .mhandler.cmd = hmp_info_migrate_cache_size,
+ .cmd = hmp_info_migrate_cache_size,
},
STEXI
@@ -579,7 +579,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show balloon information",
- .mhandler.cmd = hmp_info_balloon,
+ .cmd = hmp_info_balloon,
},
STEXI
@@ -593,7 +593,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show device tree",
- .mhandler.cmd = hmp_info_qtree,
+ .cmd = hmp_info_qtree,
},
STEXI
@@ -607,7 +607,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show qdev device model list",
- .mhandler.cmd = hmp_info_qdm,
+ .cmd = hmp_info_qdm,
},
STEXI
@@ -621,7 +621,7 @@ ETEXI
.args_type = "path:s?",
.params = "[path]",
.help = "show QOM composition tree",
- .mhandler.cmd = hmp_info_qom_tree,
+ .cmd = hmp_info_qom_tree,
},
STEXI
@@ -635,7 +635,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show roms",
- .mhandler.cmd = hmp_info_roms,
+ .cmd = hmp_info_roms,
},
STEXI
@@ -650,7 +650,7 @@ ETEXI
.params = "[name] [vcpu]",
.help = "show available trace-events & their state "
"(name: event name pattern; vcpu: vCPU to query, default is any)",
- .mhandler.cmd = hmp_info_trace_events,
+ .cmd = hmp_info_trace_events,
.command_completion = info_trace_events_completion,
},
@@ -665,7 +665,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show the TPM device",
- .mhandler.cmd = hmp_info_tpm,
+ .cmd = hmp_info_tpm,
},
STEXI
@@ -679,7 +679,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show memory backends",
- .mhandler.cmd = hmp_info_memdev,
+ .cmd = hmp_info_memdev,
},
STEXI
@@ -693,7 +693,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show memory devices",
- .mhandler.cmd = hmp_info_memory_devices,
+ .cmd = hmp_info_memory_devices,
},
STEXI
@@ -707,7 +707,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "show iothreads",
- .mhandler.cmd = hmp_info_iothreads,
+ .cmd = hmp_info_iothreads,
},
STEXI
@@ -721,7 +721,7 @@ ETEXI
.args_type = "name:s",
.params = "name",
.help = "Show rocker switch",
- .mhandler.cmd = hmp_rocker,
+ .cmd = hmp_rocker,
},
STEXI
@@ -735,7 +735,7 @@ ETEXI
.args_type = "name:s",
.params = "name",
.help = "Show rocker ports",
- .mhandler.cmd = hmp_rocker_ports,
+ .cmd = hmp_rocker_ports,
},
STEXI
@@ -749,7 +749,7 @@ ETEXI
.args_type = "name:s,tbl_id:i?",
.params = "name [tbl_id]",
.help = "Show rocker OF-DPA flow tables",
- .mhandler.cmd = hmp_rocker_of_dpa_flows,
+ .cmd = hmp_rocker_of_dpa_flows,
},
STEXI
@@ -763,7 +763,7 @@ ETEXI
.args_type = "name:s,type:i?",
.params = "name [type]",
.help = "Show rocker OF-DPA groups",
- .mhandler.cmd = hmp_rocker_of_dpa_groups,
+ .cmd = hmp_rocker_of_dpa_groups,
},
STEXI
@@ -778,7 +778,7 @@ ETEXI
.args_type = "addr:l",
.params = "address",
.help = "Display the value of a storage key",
- .mhandler.cmd = hmp_info_skeys,
+ .cmd = hmp_info_skeys,
},
#endif
@@ -793,7 +793,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "Display the latest dump status",
- .mhandler.cmd = hmp_info_dump,
+ .cmd = hmp_info_dump,
},
STEXI
@@ -807,7 +807,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "Show information about hotpluggable CPUs",
- .mhandler.cmd = hmp_hotpluggable_cpus,
+ .cmd = hmp_hotpluggable_cpus,
},
STEXI
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 848efee..6b2ae30 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -14,7 +14,7 @@ ETEXI
.args_type = "name:S?",
.params = "[cmd]",
.help = "show the help",
- .mhandler.cmd = do_help_cmd,
+ .cmd = do_help_cmd,
},
STEXI
@@ -28,7 +28,7 @@ ETEXI
.args_type = "device:B",
.params = "device|all",
.help = "commit changes to the disk images (if -snapshot is used) or backing files",
- .mhandler.cmd = hmp_commit,
+ .cmd = hmp_commit,
},
STEXI
@@ -47,7 +47,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "quit the emulator",
- .mhandler.cmd = hmp_quit,
+ .cmd = hmp_quit,
},
STEXI
@@ -61,7 +61,7 @@ ETEXI
.args_type = "device:B,size:o",
.params = "device size",
.help = "resize a block image",
- .mhandler.cmd = hmp_block_resize,
+ .cmd = hmp_block_resize,
},
STEXI
@@ -78,7 +78,7 @@ ETEXI
.args_type = "device:B,speed:o?,base:s?",
.params = "device [speed [base]]",
.help = "copy data from a backing file into a block device",
- .mhandler.cmd = hmp_block_stream,
+ .cmd = hmp_block_stream,
},
STEXI
@@ -92,7 +92,7 @@ ETEXI
.args_type = "device:B,speed:o",
.params = "device speed",
.help = "set maximum speed for a background block operation",
- .mhandler.cmd = hmp_block_job_set_speed,
+ .cmd = hmp_block_job_set_speed,
},
STEXI
@@ -107,7 +107,7 @@ ETEXI
.params = "[-f] device",
.help = "stop an active background block operation (use -f"
"\n\t\t\t if the operation is currently paused)",
- .mhandler.cmd = hmp_block_job_cancel,
+ .cmd = hmp_block_job_cancel,
},
STEXI
@@ -121,7 +121,7 @@ ETEXI
.args_type = "device:B",
.params = "device",
.help = "stop an active background block operation",
- .mhandler.cmd = hmp_block_job_complete,
+ .cmd = hmp_block_job_complete,
},
STEXI
@@ -136,7 +136,7 @@ ETEXI
.args_type = "device:B",
.params = "device",
.help = "pause an active background block operation",
- .mhandler.cmd = hmp_block_job_pause,
+ .cmd = hmp_block_job_pause,
},
STEXI
@@ -150,7 +150,7 @@ ETEXI
.args_type = "device:B",
.params = "device",
.help = "resume a paused background block operation",
- .mhandler.cmd = hmp_block_job_resume,
+ .cmd = hmp_block_job_resume,
},
STEXI
@@ -164,7 +164,7 @@ ETEXI
.args_type = "force:-f,device:B",
.params = "[-f] device",
.help = "eject a removable medium (use -f to force it)",
- .mhandler.cmd = hmp_eject,
+ .cmd = hmp_eject,
},
STEXI
@@ -178,7 +178,7 @@ ETEXI
.args_type = "id:B",
.params = "device",
.help = "remove host block device",
- .mhandler.cmd = hmp_drive_del,
+ .cmd = hmp_drive_del,
},
STEXI
@@ -197,7 +197,7 @@ ETEXI
.args_type = "device:B,target:F,arg:s?,read-only-mode:s?",
.params = "device filename [format [read-only-mode]]",
.help = "change a removable medium, optional format",
- .mhandler.cmd = hmp_change,
+ .cmd = hmp_change,
},
STEXI
@@ -256,7 +256,7 @@ ETEXI
.args_type = "filename:F",
.params = "filename",
.help = "save screen into PPM image 'filename'",
- .mhandler.cmd = hmp_screendump,
+ .cmd = hmp_screendump,
},
STEXI
@@ -270,7 +270,7 @@ ETEXI
.args_type = "filename:F",
.params = "filename",
.help = "output logs to 'filename'",
- .mhandler.cmd = hmp_logfile,
+ .cmd = hmp_logfile,
},
STEXI
@@ -285,7 +285,7 @@ ETEXI
.params = "name on|off [vcpu]",
.help = "changes status of a specific trace event "
"(vcpu: vCPU to set, default is all)",
- .mhandler.cmd = hmp_trace_event,
+ .cmd = hmp_trace_event,
.command_completion = trace_event_completion,
},
@@ -301,7 +301,7 @@ ETEXI
.args_type = "op:s?,arg:F?",
.params = "on|off|flush|set [arg]",
.help = "open, close, or flush trace file, or set a new file name",
- .mhandler.cmd = hmp_trace_file,
+ .cmd = hmp_trace_file,
},
STEXI
@@ -316,7 +316,7 @@ ETEXI
.args_type = "items:s",
.params = "item1[,...]",
.help = "activate logging of the specified items",
- .mhandler.cmd = hmp_log,
+ .cmd = hmp_log,
},
STEXI
@@ -330,7 +330,7 @@ ETEXI
.args_type = "name:s?",
.params = "[tag|id]",
.help = "save a VM snapshot. If no tag or id are provided, a new snapshot is created",
- .mhandler.cmd = hmp_savevm,
+ .cmd = hmp_savevm,
},
STEXI
@@ -347,7 +347,7 @@ ETEXI
.args_type = "name:s",
.params = "tag|id",
.help = "restore a VM snapshot from its tag or id",
- .mhandler.cmd = hmp_loadvm,
+ .cmd = hmp_loadvm,
.command_completion = loadvm_completion,
},
@@ -363,7 +363,7 @@ ETEXI
.args_type = "name:s",
.params = "tag|id",
.help = "delete a VM snapshot from its tag or id",
- .mhandler.cmd = hmp_delvm,
+ .cmd = hmp_delvm,
.command_completion = delvm_completion,
},
@@ -378,7 +378,7 @@ ETEXI
.args_type = "option:s?",
.params = "[on|off]",
.help = "run emulation in singlestep mode or switch to normal mode",
- .mhandler.cmd = hmp_singlestep,
+ .cmd = hmp_singlestep,
},
STEXI
@@ -393,7 +393,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "stop emulation",
- .mhandler.cmd = hmp_stop,
+ .cmd = hmp_stop,
},
STEXI
@@ -407,7 +407,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "resume emulation",
- .mhandler.cmd = hmp_cont,
+ .cmd = hmp_cont,
},
STEXI
@@ -421,7 +421,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "wakeup guest from suspend",
- .mhandler.cmd = hmp_system_wakeup,
+ .cmd = hmp_system_wakeup,
},
STEXI
@@ -435,7 +435,7 @@ ETEXI
.args_type = "device:s?",
.params = "[device]",
.help = "start gdbserver on given device (default 'tcp::1234'), stop with 'none'",
- .mhandler.cmd = hmp_gdbserver,
+ .cmd = hmp_gdbserver,
},
STEXI
@@ -449,7 +449,7 @@ ETEXI
.args_type = "fmt:/,addr:l",
.params = "/fmt addr",
.help = "virtual memory dump starting at 'addr'",
- .mhandler.cmd = hmp_memory_dump,
+ .cmd = hmp_memory_dump,
},
STEXI
@@ -463,7 +463,7 @@ ETEXI
.args_type = "fmt:/,addr:l",
.params = "/fmt addr",
.help = "physical memory dump starting at 'addr'",
- .mhandler.cmd = hmp_physical_memory_dump,
+ .cmd = hmp_physical_memory_dump,
},
STEXI
@@ -530,7 +530,7 @@ ETEXI
.args_type = "fmt:/,val:l",
.params = "/fmt expr",
.help = "print expression value (use $reg for CPU register access)",
- .mhandler.cmd = do_print,
+ .cmd = do_print,
},
STEXI
@@ -545,7 +545,7 @@ ETEXI
.args_type = "fmt:/,addr:i,index:i.",
.params = "/fmt addr",
.help = "I/O port read",
- .mhandler.cmd = hmp_ioport_read,
+ .cmd = hmp_ioport_read,
},
STEXI
@@ -559,7 +559,7 @@ ETEXI
.args_type = "fmt:/,addr:i,val:i",
.params = "/fmt addr value",
.help = "I/O port write",
- .mhandler.cmd = hmp_ioport_write,
+ .cmd = hmp_ioport_write,
},
STEXI
@@ -573,7 +573,7 @@ ETEXI
.args_type = "keys:s,hold-time:i?",
.params = "keys [hold_ms]",
.help = "send keys to the VM (e.g. 'sendkey ctrl-alt-f1', default hold time=100 ms)",
- .mhandler.cmd = hmp_sendkey,
+ .cmd = hmp_sendkey,
.command_completion = sendkey_completion,
},
@@ -596,7 +596,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "reset the system",
- .mhandler.cmd = hmp_system_reset,
+ .cmd = hmp_system_reset,
},
STEXI
@@ -610,7 +610,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "send system power down event",
- .mhandler.cmd = hmp_system_powerdown,
+ .cmd = hmp_system_powerdown,
},
STEXI
@@ -624,7 +624,7 @@ ETEXI
.args_type = "start:i,size:i",
.params = "addr size",
.help = "compute the checksum of a memory region",
- .mhandler.cmd = hmp_sum,
+ .cmd = hmp_sum,
},
STEXI
@@ -638,7 +638,7 @@ ETEXI
.args_type = "devname:s",
.params = "device",
.help = "add USB device (e.g. 'host:bus.addr' or 'host:vendor_id:product_id')",
- .mhandler.cmd = hmp_usb_add,
+ .cmd = hmp_usb_add,
},
STEXI
@@ -653,7 +653,7 @@ ETEXI
.args_type = "devname:s",
.params = "device",
.help = "remove USB device 'bus.addr'",
- .mhandler.cmd = hmp_usb_del,
+ .cmd = hmp_usb_del,
},
STEXI
@@ -669,7 +669,7 @@ ETEXI
.args_type = "device:O",
.params = "driver[,prop=value][,...]",
.help = "add device, like -device on the command line",
- .mhandler.cmd = hmp_device_add,
+ .cmd = hmp_device_add,
.command_completion = device_add_completion,
},
@@ -684,7 +684,7 @@ ETEXI
.args_type = "id:s",
.params = "device",
.help = "remove device",
- .mhandler.cmd = hmp_device_del,
+ .cmd = hmp_device_del,
.command_completion = device_del_completion,
},
@@ -700,7 +700,7 @@ ETEXI
.args_type = "index:i",
.params = "index",
.help = "set the default CPU",
- .mhandler.cmd = hmp_cpu,
+ .cmd = hmp_cpu,
},
STEXI
@@ -714,7 +714,7 @@ ETEXI
.args_type = "dx_str:s,dy_str:s,dz_str:s?",
.params = "dx dy [dz]",
.help = "send mouse move events",
- .mhandler.cmd = hmp_mouse_move,
+ .cmd = hmp_mouse_move,
},
STEXI
@@ -729,7 +729,7 @@ ETEXI
.args_type = "button_state:i",
.params = "state",
.help = "change mouse button state (1=L, 2=M, 4=R)",
- .mhandler.cmd = hmp_mouse_button,
+ .cmd = hmp_mouse_button,
},
STEXI
@@ -743,7 +743,7 @@ ETEXI
.args_type = "index:i",
.params = "index",
.help = "set which mouse device receives events",
- .mhandler.cmd = hmp_mouse_set,
+ .cmd = hmp_mouse_set,
},
STEXI
@@ -761,7 +761,7 @@ ETEXI
.args_type = "path:F,freq:i?,bits:i?,nchannels:i?",
.params = "path [frequency [bits [channels]]]",
.help = "capture audio to a wave file (default frequency=44100 bits=16 channels=2)",
- .mhandler.cmd = hmp_wavcapture,
+ .cmd = hmp_wavcapture,
},
STEXI
@item wavcapture @var{filename} [@var{frequency} [@var{bits} [@var{channels}]]]
@@ -782,7 +782,7 @@ ETEXI
.args_type = "n:i",
.params = "capture index",
.help = "stop capture",
- .mhandler.cmd = hmp_stopcapture,
+ .cmd = hmp_stopcapture,
},
STEXI
@item stopcapture @var{index}
@@ -798,7 +798,7 @@ ETEXI
.args_type = "val:l,size:i,filename:s",
.params = "addr size file",
.help = "save to disk virtual memory dump starting at 'addr' of size 'size'",
- .mhandler.cmd = hmp_memsave,
+ .cmd = hmp_memsave,
},
STEXI
@@ -812,7 +812,7 @@ ETEXI
.args_type = "val:l,size:i,filename:s",
.params = "addr size file",
.help = "save to disk physical memory dump starting at 'addr' of size 'size'",
- .mhandler.cmd = hmp_pmemsave,
+ .cmd = hmp_pmemsave,
},
STEXI
@@ -826,7 +826,7 @@ ETEXI
.args_type = "bootdevice:s",
.params = "bootdevice",
.help = "define new values for the boot device list",
- .mhandler.cmd = hmp_boot_set,
+ .cmd = hmp_boot_set,
},
STEXI
@@ -844,7 +844,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "inject an NMI",
- .mhandler.cmd = hmp_nmi,
+ .cmd = hmp_nmi,
},
STEXI
@item nmi @var{cpu}
@@ -858,7 +858,7 @@ ETEXI
.args_type = "device:s,data:s",
.params = "device data",
.help = "Write to a ring buffer character device",
- .mhandler.cmd = hmp_ringbuf_write,
+ .cmd = hmp_ringbuf_write,
.command_completion = ringbuf_write_completion,
},
@@ -875,7 +875,7 @@ ETEXI
.args_type = "device:s,size:i",
.params = "device size",
.help = "Read from a ring buffer character device",
- .mhandler.cmd = hmp_ringbuf_read,
+ .cmd = hmp_ringbuf_read,
.command_completion = ringbuf_write_completion,
},
@@ -901,7 +901,7 @@ ETEXI
" full copy of disk\n\t\t\t -i for migration without "
"shared storage with incremental copy of disk "
"(base image shared between src and destination)",
- .mhandler.cmd = hmp_migrate,
+ .cmd = hmp_migrate,
},
@@ -918,7 +918,7 @@ ETEXI
.args_type = "",
.params = "",
.help = "cancel the current VM migration",
- .mhandler.cmd = hmp_migrate_cancel,
+ .cmd = hmp_migrate_cancel,
},
STEXI
@@ -933,7 +933,7 @@ ETEXI
.args_type = "uri:s",
.params = "uri",
.help = "Continue an incoming migration from an -incoming defer",
- .mhandler.cmd = hmp_migrate_incoming,
+ .cmd = hmp_migrate_incoming,
},
STEXI
@@ -954,7 +954,7 @@ ETEXI
"The cache size affects the number of cache misses."
"In case of a high cache miss ratio you need to increase"
" the cache size",
- .mhandler.cmd = hmp_migrate_set_cache_size,
+ .cmd = hmp_migrate_set_cache_size,
},
STEXI
@@ -969,7 +969,7 @@ ETEXI
.params = "value",
.help = "set maximum speed (in bytes) for migrations. "
"Defaults to MB if no size suffix is specified, ie. B/K/M/G/T",
- .mhandler.cmd = hmp_migrate_set_speed,
+ .cmd = hmp_migrate_set_speed,
},
STEXI
@@ -983,7 +983,7 @@ ETEXI
.args_type = "value:T",
.params = "value",
.help = "set maximum tolerated downtime (in seconds) for migrations",
- .mhandler.cmd = hmp_migrate_set_downtime,
+ .cmd = hmp_migrate_set_downtime,
},
STEXI
@@ -997,7 +997,7 @@ ETEXI
.args_type = "capability:s,state:b",
.params = "capability state",
.help = "Enable/Disable the usage of a capability for migration",
- .mhandler.cmd = hmp_migrate_set_capability,
+ .cmd = hmp_migrate_set_capability,
.command_completion = migrate_set_capability_completion,
},
@@ -1012,7 +1012,7 @@ ETEXI
.args_type = "parameter:s,value:s",
.params = "parameter value",
.help = "Set the parameter for migration",
- .mhandler.cmd = hmp_migrate_set_parameter,
+ .cmd = hmp_migrate_set_parameter,
.command_completion = migrate_set_parameter_completion,
},
@@ -1029,7 +1029,7 @@ ETEXI
.help = "Followup to a migration command to switch the migration"
" to postcopy mode. The postcopy-ram capability must "
"be set before the original migration command.",
- .mhandler.cmd = hmp_migrate_start_postcopy,
+ .cmd = hmp_migrate_start_postcopy,
},
STEXI
@@ -1044,7 +1044,7 @@ ETEXI
.args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
.params = "protocol hostname port tls-port cert-subject",
.help = "set migration information for remote display",
- .mhandler.cmd = hmp_client_migrate_info,
+ .cmd = hmp_client_migrate_info,
},
STEXI
@@ -1067,7 +1067,7 @@ ETEXI
"-s: dump in kdump-compressed format, with snappy compression.\n\t\t\t"
"begin: the starting physical address.\n\t\t\t"
"length: the memory size, in bytes.",
- .mhandler.cmd = hmp_dump_guest_memory,
+ .cmd = hmp_dump_guest_memory,
},
@@ -1094,7 +1094,7 @@ ETEXI
.args_type = "filename:F",
.params = "",
.help = "Save guest storage keys into file 'filename'.\n",
- .mhandler.cmd = hmp_dump_skeys,
+ .cmd = hmp_dump_skeys,
},
#endif
@@ -1116,7 +1116,7 @@ ETEXI
"The default format is qcow2. The -n flag requests QEMU\n\t\t\t"
"to reuse the image found in new-image-file, instead of\n\t\t\t"
"recreating it from scratch.",
- .mhandler.cmd = hmp_snapshot_blkdev,
+ .cmd = hmp_snapshot_blkdev,
},
STEXI
@@ -1132,7 +1132,7 @@ ETEXI
.help = "take an internal snapshot of device.\n\t\t\t"
"The format of the image used by device must\n\t\t\t"
"support it, such as qcow2.\n\t\t\t",
- .mhandler.cmd = hmp_snapshot_blkdev_internal,
+ .cmd = hmp_snapshot_blkdev_internal,
},
STEXI
@@ -1150,7 +1150,7 @@ ETEXI
"the snapshot matching both id and name.\n\t\t\t"
"The format of the image used by device must\n\t\t\t"
"support it, such as qcow2.\n\t\t\t",
- .mhandler.cmd = hmp_snapshot_delete_blkdev_internal,
+ .cmd = hmp_snapshot_delete_blkdev_internal,
},
STEXI
@@ -1171,7 +1171,7 @@ ETEXI
"in new-image-file, instead of recreating it from scratch.\n\t\t\t"
"The -f flag requests QEMU to copy the whole disk,\n\t\t\t"
"so that the result does not need a backing file.\n\t\t\t",
- .mhandler.cmd = hmp_drive_mirror,
+ .cmd = hmp_drive_mirror,
},
STEXI
@item drive_mirror
@@ -1192,7 +1192,7 @@ ETEXI
"in new-image-file, instead of recreating it from scratch.\n\t\t\t"
"The -f flag requests QEMU to copy the whole disk,\n\t\t\t"
"so that the result does not need a backing file.\n\t\t\t",
- .mhandler.cmd = hmp_drive_backup,
+ .cmd = hmp_drive_backup,
},
STEXI
@item drive_backup
@@ -1210,7 +1210,7 @@ ETEXI
"[,snapshot=on|off][,cache=on|off]\n"
"[,readonly=on|off][,copy-on-read=on|off]",
.help = "add drive to PCI storage controller",
- .mhandler.cmd = hmp_drive_add,
+ .cmd = hmp_drive_add,
},
STEXI
@@ -1234,7 +1234,7 @@ ETEXI
"<error_status> = error string or 32bit\n\t\t\t"
"<tlb header> = 32bit x 4\n\t\t\t"
"<tlb header prefix> = 32bit x 4",
- .mhandler.cmd = hmp_pcie_aer_inject_error,
+ .cmd = hmp_pcie_aer_inject_error,
},
STEXI
@@ -1248,7 +1248,7 @@ ETEXI
.args_type = "device:s,opts:s?",
.params = "tap|user|socket|vde|netmap|bridge|vhost-user|dump [options]",
.help = "add host VLAN client",
- .mhandler.cmd = hmp_host_net_add,
+ .cmd = hmp_host_net_add,
.command_completion = host_net_add_completion,
},
@@ -1263,7 +1263,7 @@ ETEXI
.args_type = "vlan_id:i,device:s",
.params = "vlan_id name",
.help = "remove host VLAN client",
- .mhandler.cmd = hmp_host_net_remove,
+ .cmd = hmp_host_net_remove,
.command_completion = host_net_remove_completion,
},
@@ -1278,7 +1278,7 @@ ETEXI
.args_type = "netdev:O",
.params = "[user|tap|socket|vde|bridge|hubport|netmap|vhost-user],id=str[,prop=value][,...]",
.help = "add host network device",
- .mhandler.cmd = hmp_netdev_add,
+ .cmd = hmp_netdev_add,
.command_completion = netdev_add_completion,
},
@@ -1293,7 +1293,7 @@ ETEXI
.args_type = "id:s",
.params = "id",
.help = "remove host network device",
- .mhandler.cmd = hmp_netdev_del,
+ .cmd = hmp_netdev_del,
.command_completion = netdev_del_completion,
},
@@ -1308,7 +1308,7 @@ ETEXI
.args_type = "object:O",
.params = "[qom-type=]type,id=str[,prop=value][,...]",
.help = "create QOM object",
- .mhandler.cmd = hmp_object_add,
+ .cmd = hmp_object_add,
.command_completion = object_add_completion,
},
@@ -1323,7 +1323,7 @@ ETEXI
.args_type = "id:s",
.params = "id",
.help = "destroy QOM object",
- .mhandler.cmd = hmp_object_del,
+ .cmd = hmp_object_del,
.command_completion = object_del_completion,
},
@@ -1339,7 +1339,7 @@ ETEXI
.args_type = "arg1:s,arg2:s?,arg3:s?",
.params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport",
.help = "redirect TCP or UDP connections from host to guest (requires -net user)",
- .mhandler.cmd = hmp_hostfwd_add,
+ .cmd = hmp_hostfwd_add,
},
#endif
STEXI
@@ -1354,7 +1354,7 @@ ETEXI
.args_type = "arg1:s,arg2:s?,arg3:s?",
.params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport",
.help = "remove host-to-guest TCP or UDP redirection",
- .mhandler.cmd = hmp_hostfwd_remove,
+ .cmd = hmp_hostfwd_remove,
},
#endif
@@ -1369,7 +1369,7 @@ ETEXI
.args_type = "value:M",
.params = "target",
.help = "request VM to change its memory allocation (in MB)",
- .mhandler.cmd = hmp_balloon,
+ .cmd = hmp_balloon,
},
STEXI
@@ -1383,7 +1383,7 @@ ETEXI
.args_type = "name:s,up:b",
.params = "name on|off",
.help = "change the link status of a network adapter",
- .mhandler.cmd = hmp_set_link,
+ .cmd = hmp_set_link,
.command_completion = set_link_completion,
},
@@ -1398,7 +1398,7 @@ ETEXI
.args_type = "action:s",
.params = "[reset|shutdown|poweroff|pause|debug|none]",
.help = "change watchdog action",
- .mhandler.cmd = hmp_watchdog_action,
+ .cmd = hmp_watchdog_action,
.command_completion = watchdog_action_completion,
},
@@ -1413,7 +1413,7 @@ ETEXI
.args_type = "aclname:s",
.params = "aclname",
.help = "list rules in the access control list",
- .mhandler.cmd = hmp_acl_show,
+ .cmd = hmp_acl_show,
},
STEXI
@@ -1430,7 +1430,7 @@ ETEXI
.args_type = "aclname:s,policy:s",
.params = "aclname allow|deny",
.help = "set default access control list policy",
- .mhandler.cmd = hmp_acl_policy,
+ .cmd = hmp_acl_policy,
},
STEXI
@@ -1446,7 +1446,7 @@ ETEXI
.args_type = "aclname:s,match:s,policy:s,index:i?",
.params = "aclname match allow|deny [index]",
.help = "add a match rule to the access control list",
- .mhandler.cmd = hmp_acl_add,
+ .cmd = hmp_acl_add,
},
STEXI
@@ -1465,7 +1465,7 @@ ETEXI
.args_type = "aclname:s,match:s",
.params = "aclname match",
.help = "remove a match rule from the access control list",
- .mhandler.cmd = hmp_acl_remove,
+ .cmd = hmp_acl_remove,
},
STEXI
@@ -1479,7 +1479,7 @@ ETEXI
.args_type = "aclname:s",
.params = "aclname",
.help = "reset the access control list",
- .mhandler.cmd = hmp_acl_reset,
+ .cmd = hmp_acl_reset,
},
STEXI
@@ -1494,7 +1494,7 @@ ETEXI
.args_type = "all:-a,writable:-w,uri:s",
.params = "nbd_server_start [-a] [-w] host:port",
.help = "serve block devices on the given host and port",
- .mhandler.cmd = hmp_nbd_server_start,
+ .cmd = hmp_nbd_server_start,
},
STEXI
@item nbd_server_start @var{host}:@var{port}
@@ -1510,7 +1510,7 @@ ETEXI
.args_type = "writable:-w,device:B",
.params = "nbd_server_add [-w] device",
.help = "export a block device via NBD",
- .mhandler.cmd = hmp_nbd_server_add,
+ .cmd = hmp_nbd_server_add,
},
STEXI
@item nbd_server_add @var{device}
@@ -1525,7 +1525,7 @@ ETEXI
.args_type = "",
.params = "nbd_server_stop",
.help = "stop serving block devices using the NBD protocol",
- .mhandler.cmd = hmp_nbd_server_stop,
+ .cmd = hmp_nbd_server_stop,
},
STEXI
@item nbd_server_stop
@@ -1541,7 +1541,7 @@ ETEXI
.args_type = "broadcast:-b,cpu_index:i,bank:i,status:l,mcg_status:l,addr:l,misc:l",
.params = "[-b] cpu bank status mcgstatus addr misc",
.help = "inject a MCE on the given CPU [and broadcast to other CPUs with -b option]",
- .mhandler.cmd = hmp_mce,
+ .cmd = hmp_mce,
},
#endif
@@ -1556,7 +1556,7 @@ ETEXI
.args_type = "fdname:s",
.params = "getfd name",
.help = "receive a file descriptor via SCM rights and assign it a name",
- .mhandler.cmd = hmp_getfd,
+ .cmd = hmp_getfd,
},
STEXI
@@ -1572,7 +1572,7 @@ ETEXI
.args_type = "fdname:s",
.params = "closefd name",
.help = "close a file descriptor previously passed via SCM rights",
- .mhandler.cmd = hmp_closefd,
+ .cmd = hmp_closefd,
},
STEXI
@@ -1588,7 +1588,7 @@ ETEXI
.args_type = "device:B,password:s",
.params = "block_passwd device password",
.help = "set the password of encrypted block devices",
- .mhandler.cmd = hmp_block_passwd,
+ .cmd = hmp_block_passwd,
},
STEXI
@@ -1602,7 +1602,7 @@ ETEXI
.args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l",
.params = "device bps bps_rd bps_wr iops iops_rd iops_wr",
.help = "change I/O throttle limits for a block drive",
- .mhandler.cmd = hmp_block_set_io_throttle,
+ .cmd = hmp_block_set_io_throttle,
},
STEXI
@@ -1616,7 +1616,7 @@ ETEXI
.args_type = "protocol:s,password:s,connected:s?",
.params = "protocol password action-if-connected",
.help = "set spice/vnc password",
- .mhandler.cmd = hmp_set_password,
+ .cmd = hmp_set_password,
},
STEXI
@@ -1635,7 +1635,7 @@ ETEXI
.args_type = "protocol:s,time:s",
.params = "protocol time",
.help = "set spice/vnc password expire-time",
- .mhandler.cmd = hmp_expire_password,
+ .cmd = hmp_expire_password,
},
STEXI
@@ -1666,7 +1666,7 @@ ETEXI
.args_type = "args:s",
.params = "args",
.help = "add chardev",
- .mhandler.cmd = hmp_chardev_add,
+ .cmd = hmp_chardev_add,
.command_completion = chardev_add_completion,
},
@@ -1682,7 +1682,7 @@ ETEXI
.args_type = "id:s",
.params = "id",
.help = "remove chardev",
- .mhandler.cmd = hmp_chardev_remove,
+ .cmd = hmp_chardev_remove,
.command_completion = chardev_remove_completion,
},
@@ -1698,7 +1698,7 @@ ETEXI
.args_type = "device:B,command:s",
.params = "[device] \"[command]\"",
.help = "run a qemu-io command on a block device",
- .mhandler.cmd = hmp_qemu_io,
+ .cmd = hmp_qemu_io,
},
STEXI
@@ -1713,7 +1713,7 @@ ETEXI
.args_type = "id:i",
.params = "id",
.help = "add cpu",
- .mhandler.cmd = hmp_cpu_add,
+ .cmd = hmp_cpu_add,
},
STEXI
@@ -1727,7 +1727,7 @@ ETEXI
.args_type = "path:s?",
.params = "path",
.help = "list QOM properties",
- .mhandler.cmd = hmp_qom_list,
+ .cmd = hmp_qom_list,
},
STEXI
@@ -1740,7 +1740,7 @@ ETEXI
.args_type = "path:s,property:s,value:s",
.params = "path property value",
.help = "set QOM property",
- .mhandler.cmd = hmp_qom_set,
+ .cmd = hmp_qom_set,
},
STEXI
@@ -1753,8 +1753,8 @@ ETEXI
.args_type = "item:s?",
.params = "[subcommand]",
.help = "show various information about the system state",
- .mhandler.cmd = hmp_info_help,
- .sub_table = info_cmds,
+ .cmd = hmp_info_help,
+ .sub_table = info_cmds,
},
STEXI
--
2.9.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [Qemu-devel] [PATCH v2 07/12] monitor: implement 'qmp_query_commands' without qmp_cmds
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
` (5 preceding siblings ...)
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 06/12] monitor: remove mhandler.cmd_new marcandre.lureau
@ 2016-07-21 14:00 ` marcandre.lureau
2016-07-21 22:51 ` Eric Blake
2016-08-05 13:25 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 08/12] build-sys: remove qmp-commands-old.h marcandre.lureau
` (4 subsequent siblings)
11 siblings, 2 replies; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
So we can get rid of the static qmp_cmds table.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
monitor.c | 32 ++++++++++++++------------------
1 file changed, 14 insertions(+), 18 deletions(-)
diff --git a/monitor.c b/monitor.c
index 642be2e..bd41b4b 100644
--- a/monitor.c
+++ b/monitor.c
@@ -229,8 +229,6 @@ static int mon_refcount;
static mon_cmd_t mon_cmds[];
static mon_cmd_t info_cmds[];
-static const mon_cmd_t qmp_cmds[];
-
Monitor *cur_mon;
static QEMUClockType event_clock_type = QEMU_CLOCK_REALTIME;
@@ -947,21 +945,24 @@ static void hmp_info_help(Monitor *mon, const QDict *qdict)
help_cmd(mon, "info");
}
-CommandInfoList *qmp_query_commands(Error **errp)
+static void query_commands_cb(QmpCommand *cmd, void *opaque)
{
- CommandInfoList *info, *cmd_list = NULL;
- const mon_cmd_t *cmd;
+ CommandInfoList *info, **list = opaque;
- for (cmd = qmp_cmds; cmd->name != NULL; cmd++) {
- info = g_malloc0(sizeof(*info));
- info->value = g_malloc0(sizeof(*info->value));
- info->value->name = g_strdup(cmd->name);
+ info = g_malloc0(sizeof(*info));
+ info->value = g_malloc0(sizeof(*info->value));
+ info->value->name = g_strdup(cmd->name);
+ info->next = *list;
+ *list = info;
+}
- info->next = cmd_list;
- cmd_list = info;
- }
+CommandInfoList *qmp_query_commands(Error **errp)
+{
+ CommandInfoList *list = NULL;
- return cmd_list;
+ qmp_for_each_command(query_commands_cb, &list);
+
+ return list;
}
EventInfoList *qmp_query_events(Error **errp)
@@ -2166,11 +2167,6 @@ static mon_cmd_t mon_cmds[] = {
{ NULL, NULL, },
};
-static const mon_cmd_t qmp_cmds[] = {
-#include "qmp-commands-old.h"
- { /* NULL */ },
-};
-
/*******************************************************************/
static const char *pch;
--
2.9.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [Qemu-devel] [PATCH v2 08/12] build-sys: remove qmp-commands-old.h
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
` (6 preceding siblings ...)
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 07/12] monitor: implement 'qmp_query_commands' without qmp_cmds marcandre.lureau
@ 2016-07-21 14:00 ` marcandre.lureau
2016-07-21 22:52 ` Eric Blake
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 09/12] qapi: remove the "middle" mode marcandre.lureau
` (3 subsequent siblings)
11 siblings, 1 reply; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
Makefile.target | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/Makefile.target b/Makefile.target
index a440bcb..3d8572f 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -156,7 +156,7 @@ else
obj-y += hw/$(TARGET_BASE_ARCH)/
endif
-GENERATED_HEADERS += hmp-commands.h hmp-commands-info.h qmp-commands-old.h
+GENERATED_HEADERS += hmp-commands.h hmp-commands-info.h
endif # CONFIG_SOFTMMU
@@ -209,13 +209,10 @@ hmp-commands.h: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
hmp-commands-info.h: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
-qmp-commands-old.h: $(SRC_PATH)/qmp-commands.hx $(SRC_PATH)/scripts/hxtool
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
-
clean:
rm -f *.a *~ $(PROGS)
rm -f $(shell find . -name '*.[od]')
- rm -f hmp-commands.h qmp-commands-old.h gdbstub-xml.c
+ rm -f hmp-commands.h gdbstub-xml.c
ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
--
2.9.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [Qemu-devel] [PATCH v2 09/12] qapi: remove the "middle" mode
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
` (7 preceding siblings ...)
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 08/12] build-sys: remove qmp-commands-old.h marcandre.lureau
@ 2016-07-21 14:00 ` marcandre.lureau
2016-07-21 22:55 ` Eric Blake
2016-08-05 13:31 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 10/12] monitor: use qmp_dispatch() marcandre.lureau
` (2 subsequent siblings)
11 siblings, 2 replies; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Now that the register function is always generated, we can
remove the so-called "middle" mode from the generator script.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
scripts/qapi-commands.py | 29 +++++------------------------
1 file changed, 5 insertions(+), 24 deletions(-)
diff --git a/scripts/qapi-commands.py b/scripts/qapi-commands.py
index a06a2c4..4754ae0 100644
--- a/scripts/qapi-commands.py
+++ b/scripts/qapi-commands.py
@@ -84,17 +84,8 @@ static void qmp_marshal_output_%(c_name)s(%(c_type)s ret_in, QObject **ret_out,
def gen_marshal_proto(name):
- ret = 'void qmp_marshal_%s(QDict *args, QObject **ret, Error **errp)' % c_name(name)
- if not middle_mode:
- ret = 'static ' + ret
- return ret
-
-
-def gen_marshal_decl(name):
- return mcgen('''
-%(proto)s;
-''',
- proto=gen_marshal_proto(name))
+ return 'static void qmp_marshal_%s' % c_name(name) + \
+ '(QDict *args, QObject **ret, Error **errp)'
def gen_marshal(name, arg_type, boxed, ret_type):
@@ -209,8 +200,7 @@ class QAPISchemaGenCommandVisitor(QAPISchemaVisitor):
self._visited_ret_types = set()
def visit_end(self):
- if not middle_mode:
- self.defn += gen_registry(self._regy)
+ self.defn += gen_registry(self._regy)
self._regy = None
self._visited_ret_types = None
@@ -222,21 +212,12 @@ class QAPISchemaGenCommandVisitor(QAPISchemaVisitor):
if ret_type and ret_type not in self._visited_ret_types:
self._visited_ret_types.add(ret_type)
self.defn += gen_marshal_output(ret_type)
- if middle_mode:
- self.decl += gen_marshal_decl(name)
self.defn += gen_marshal(name, arg_type, boxed, ret_type)
- if not middle_mode:
- self._regy += gen_register_command(name, success_response)
-
+ self._regy += gen_register_command(name, success_response)
-middle_mode = False
(input_file, output_dir, do_c, do_h, prefix, opts) = \
- parse_command_line("m", ["middle"])
-
-for o, a in opts:
- if o in ("-m", "--middle"):
- middle_mode = True
+ parse_command_line()
c_comment = '''
/*
--
2.9.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [Qemu-devel] [PATCH v2 10/12] monitor: use qmp_dispatch()
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
` (8 preceding siblings ...)
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 09/12] qapi: remove the "middle" mode marcandre.lureau
@ 2016-07-21 14:00 ` marcandre.lureau
2016-08-05 14:43 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 11/12] qmp: update qmp_query_spice fallback marcandre.lureau
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 12/12] Drop qmp-commands.hx marcandre.lureau
11 siblings, 1 reply; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Replace the old manual dispatch and validation code by the generic one
provided by qapi common code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
monitor.c | 319 +++++++----------------------------------------------------
trace-events | 1 -
2 files changed, 34 insertions(+), 286 deletions(-)
diff --git a/monitor.c b/monitor.c
index bd41b4b..c87089f 100644
--- a/monitor.c
+++ b/monitor.c
@@ -166,7 +166,6 @@ struct MonFdset {
};
typedef struct {
- QObject *id;
JSONMessageParser parser;
/*
* When a client connects, we're in capabilities negotiation mode.
@@ -399,49 +398,6 @@ static void monitor_json_emitter(Monitor *mon, const QObject *data)
QDECREF(json);
}
-static QDict *build_qmp_error_dict(Error *err)
-{
- QObject *obj;
-
- obj = qobject_from_jsonf("{ 'error': { 'class': %s, 'desc': %s } }",
- QapiErrorClass_lookup[error_get_class(err)],
- error_get_pretty(err));
-
- return qobject_to_qdict(obj);
-}
-
-static void monitor_protocol_emitter(Monitor *mon, QObject *data,
- Error *err)
-{
- QDict *qmp;
-
- trace_monitor_protocol_emitter(mon);
-
- if (!err) {
- /* success response */
- qmp = qdict_new();
- if (data) {
- qobject_incref(data);
- qdict_put_obj(qmp, "return", data);
- } else {
- /* return an empty QDict by default */
- qdict_put(qmp, "return", qdict_new());
- }
- } else {
- /* error response */
- qmp = build_qmp_error_dict(err);
- }
-
- if (mon->qmp.id) {
- qdict_put_obj(qmp, "id", mon->qmp.id);
- mon->qmp.id = NULL;
- }
-
- monitor_json_emitter(mon, QOBJECT(qmp));
- QDECREF(qmp);
-}
-
-
static MonitorQAPIEventConf monitor_qapi_event_conf[QAPI_EVENT__MAX] = {
/* Limit guest-triggerable events to 1 per second */
[QAPI_EVENT_RTC_CHANGE] = { 1000 * SCALE_MS },
@@ -2517,11 +2473,6 @@ static const mon_cmd_t *search_dispatch_table(const mon_cmd_t *disp_table,
return NULL;
}
-static const mon_cmd_t *qmp_find_cmd(const char *cmdname)
-{
- return search_dispatch_table(qmp_cmds, cmdname);
-}
-
/*
* Parse command name from @cmdp according to command table @table.
* If blank, return NULL.
@@ -3672,199 +3623,6 @@ static bool invalid_qmp_mode(const Monitor *mon, const char *cmd,
return false;
}
-/*
- * Argument validation rules:
- *
- * 1. The argument must exist in cmd_args qdict
- * 2. The argument type must be the expected one
- *
- * Special case: If the argument doesn't exist in cmd_args and
- * the QMP_ACCEPT_UNKNOWNS flag is set, then the
- * checking is skipped for it.
- */
-static void check_client_args_type(const QDict *client_args,
- const QDict *cmd_args, int flags,
- Error **errp)
-{
- const QDictEntry *ent;
-
- for (ent = qdict_first(client_args); ent;ent = qdict_next(client_args,ent)){
- QObject *obj;
- QString *arg_type;
- const QObject *client_arg = qdict_entry_value(ent);
- const char *client_arg_name = qdict_entry_key(ent);
-
- obj = qdict_get(cmd_args, client_arg_name);
- if (!obj) {
- if (flags & QMP_ACCEPT_UNKNOWNS) {
- /* handler accepts unknowns */
- continue;
- }
- /* client arg doesn't exist */
- error_setg(errp, QERR_INVALID_PARAMETER, client_arg_name);
- return;
- }
-
- arg_type = qobject_to_qstring(obj);
- assert(arg_type != NULL);
-
- /* check if argument's type is correct */
- switch (qstring_get_str(arg_type)[0]) {
- case 'F':
- case 'B':
- case 's':
- if (qobject_type(client_arg) != QTYPE_QSTRING) {
- error_setg(errp, QERR_INVALID_PARAMETER_TYPE,
- client_arg_name, "string");
- return;
- }
- break;
- case 'i':
- case 'l':
- case 'M':
- case 'o':
- if (qobject_type(client_arg) != QTYPE_QINT) {
- error_setg(errp, QERR_INVALID_PARAMETER_TYPE,
- client_arg_name, "int");
- return;
- }
- break;
- case 'T':
- if (qobject_type(client_arg) != QTYPE_QINT &&
- qobject_type(client_arg) != QTYPE_QFLOAT) {
- error_setg(errp, QERR_INVALID_PARAMETER_TYPE,
- client_arg_name, "number");
- return;
- }
- break;
- case 'b':
- case '-':
- if (qobject_type(client_arg) != QTYPE_QBOOL) {
- error_setg(errp, QERR_INVALID_PARAMETER_TYPE,
- client_arg_name, "bool");
- return;
- }
- break;
- case 'O':
- assert(flags & QMP_ACCEPT_UNKNOWNS);
- break;
- case 'q':
- /* Any QObject can be passed. */
- break;
- case '/':
- case '.':
- /*
- * These types are not supported by QMP and thus are not
- * handled here. Fall through.
- */
- default:
- abort();
- }
- }
-}
-
-/*
- * - Check if the client has passed all mandatory args
- * - Set special flags for argument validation
- */
-static void check_mandatory_args(const QDict *cmd_args,
- const QDict *client_args, int *flags,
- Error **errp)
-{
- const QDictEntry *ent;
-
- for (ent = qdict_first(cmd_args); ent; ent = qdict_next(cmd_args, ent)) {
- const char *cmd_arg_name = qdict_entry_key(ent);
- QString *type = qobject_to_qstring(qdict_entry_value(ent));
- assert(type != NULL);
-
- if (qstring_get_str(type)[0] == 'O') {
- assert((*flags & QMP_ACCEPT_UNKNOWNS) == 0);
- *flags |= QMP_ACCEPT_UNKNOWNS;
- } else if (qstring_get_str(type)[0] != '-' &&
- qstring_get_str(type)[1] != '?' &&
- !qdict_haskey(client_args, cmd_arg_name)) {
- error_setg(errp, QERR_MISSING_PARAMETER, cmd_arg_name);
- return;
- }
- }
-}
-
-static QDict *qdict_from_args_type(const char *args_type)
-{
- int i;
- QDict *qdict;
- QString *key, *type, *cur_qs;
-
- assert(args_type != NULL);
-
- qdict = qdict_new();
-
- if (args_type == NULL || args_type[0] == '\0') {
- /* no args, empty qdict */
- goto out;
- }
-
- key = qstring_new();
- type = qstring_new();
-
- cur_qs = key;
-
- for (i = 0;; i++) {
- switch (args_type[i]) {
- case ',':
- case '\0':
- qdict_put(qdict, qstring_get_str(key), type);
- QDECREF(key);
- if (args_type[i] == '\0') {
- goto out;
- }
- type = qstring_new(); /* qdict has ref */
- cur_qs = key = qstring_new();
- break;
- case ':':
- cur_qs = type;
- break;
- default:
- qstring_append_chr(cur_qs, args_type[i]);
- break;
- }
- }
-
-out:
- return qdict;
-}
-
-/*
- * Client argument checking rules:
- *
- * 1. Client must provide all mandatory arguments
- * 2. Each argument provided by the client must be expected
- * 3. Each argument provided by the client must have the type expected
- * by the command
- */
-static void qmp_check_client_args(const mon_cmd_t *cmd, QDict *client_args,
- Error **errp)
-{
- Error *err = NULL;
- int flags;
- QDict *cmd_args;
-
- cmd_args = qdict_from_args_type(cmd->args_type);
-
- flags = 0;
- check_mandatory_args(cmd_args, client_args, &flags, &err);
- if (err) {
- goto out;
- }
-
- check_client_args_type(client_args, cmd_args, flags, &err);
-
-out:
- error_propagate(errp, err);
- QDECREF(cmd_args);
-}
-
/*
* Input object checking rules
*
@@ -3923,67 +3681,58 @@ static QDict *qmp_check_input_obj(QObject *input_obj, Error **errp)
static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
{
- Error *local_err = NULL;
- QObject *obj, *data;
- QDict *input, *args;
- const mon_cmd_t *cmd;
- QmpCommand *qcmd;
+ QObject *req, *rsp = NULL, *id = NULL;
+ QDict *qdict = NULL;
const char *cmd_name;
Monitor *mon = cur_mon;
+ Error *err = NULL;
- args = input = NULL;
- data = NULL;
-
- obj = json_parser_parse(tokens, NULL);
- if (!obj) {
- // FIXME: should be triggered in json_parser_parse()
- error_setg(&local_err, QERR_JSON_PARSING);
+ req = json_parser_parse_err(tokens, NULL, &err);
+ if (err || !req || qobject_type(req) != QTYPE_QDICT) {
+ if (!err) {
+ error_setg(&err, QERR_JSON_PARSING);
+ }
goto err_out;
}
- input = qmp_check_input_obj(obj, &local_err);
- if (!input) {
- qobject_decref(obj);
+ qdict = qmp_check_input_obj(req, &err);
+ if (!qdict) {
goto err_out;
}
- mon->qmp.id = qdict_get(input, "id");
- qobject_incref(mon->qmp.id);
+ id = qdict_get(qdict, "id");
+ qobject_incref(id);
+ qdict_del(qdict, "id");
- cmd_name = qdict_get_str(input, "execute");
+ cmd_name = qdict_get_str(qdict, "execute");
trace_handle_qmp_command(mon, cmd_name);
- cmd = qmp_find_cmd(cmd_name);
- qcmd = qmp_find_command(cmd_name);
- if (!qcmd || !cmd) {
- error_set(&local_err, ERROR_CLASS_COMMAND_NOT_FOUND,
- "The command %s has not been found", cmd_name);
- goto err_out;
- }
- if (invalid_qmp_mode(mon, cmd_name, &local_err)) {
+
+ if (invalid_qmp_mode(mon, cmd_name, &err)) {
goto err_out;
}
- obj = qdict_get(input, "arguments");
- if (!obj) {
- args = qdict_new();
- } else {
- args = qobject_to_qdict(obj);
- QINCREF(args);
- }
+ rsp = qmp_dispatch(req);
- qmp_check_client_args(cmd, args, &local_err);
- if (local_err) {
- goto err_out;
+err_out:
+ if (err) {
+ qdict = qdict_new();
+ qdict_put_obj(qdict, "error", qmp_build_error_object(err));
+ error_free(err);
+ rsp = QOBJECT(qdict);
}
- qcmd->fn(args, &data, &local_err);
+ if (rsp) {
+ if (id) {
+ qdict_put_obj(qobject_to_qdict(rsp), "id", id);
+ id = NULL;
+ }
-err_out:
- monitor_protocol_emitter(mon, data, local_err);
- qobject_decref(data);
- error_free(local_err);
- QDECREF(input);
- QDECREF(args);
+ monitor_json_emitter(mon, rsp);
+ }
+
+ qobject_decref(id);
+ qobject_decref(rsp);
+ qobject_decref(req);
}
static void monitor_qmp_read(void *opaque, const uint8_t *buf, int size)
diff --git a/trace-events b/trace-events
index 4767059..b358e09 100644
--- a/trace-events
+++ b/trace-events
@@ -97,7 +97,6 @@ qemu_co_mutex_unlock_return(void *mutex, void *self) "mutex %p self %p"
# monitor.c
handle_qmp_command(void *mon, const char *cmd_name) "mon %p cmd_name \"%s\""
-monitor_protocol_emitter(void *mon) "mon %p"
monitor_protocol_event_handler(uint32_t event, void *qdict) "event=%d data=%p"
monitor_protocol_event_emit(uint32_t event, void *data) "event=%d data=%p"
monitor_protocol_event_queue(uint32_t event, void *qdict, uint64_t rate) "event=%d data=%p rate=%" PRId64
--
2.9.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [Qemu-devel] [PATCH v2 11/12] qmp: update qmp_query_spice fallback
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
` (9 preceding siblings ...)
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 10/12] monitor: use qmp_dispatch() marcandre.lureau
@ 2016-07-21 14:00 ` marcandre.lureau
2016-08-05 13:40 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 12/12] Drop qmp-commands.hx marcandre.lureau
11 siblings, 1 reply; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
There are a few commands that are undef #ifdef conditions in
qmp-commands.hx. Move all the qmp_query_spice fallback in the same
location, return an error and update the comment.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
monitor.c | 14 ++++++++++++++
qmp.c | 16 ----------------
2 files changed, 14 insertions(+), 16 deletions(-)
diff --git a/monitor.c b/monitor.c
index c87089f..46966d5 100644
--- a/monitor.c
+++ b/monitor.c
@@ -4048,6 +4048,20 @@ QemuOptsList qemu_mon_opts = {
},
};
+/*
+ * the QAPI schema is blissfully unaware #ifdef FOO commands, and the
+ * QAPI code generator happily generates a dead qmp_marshal_foo_cmd()
+ * that calls qmp_foo_cmd(). Provide it one, or else linking fails.
+ * FIXME Educate the QAPI schema on #ifdef commands.
+ */
+#ifndef CONFIG_SPICE
+SpiceInfo *qmp_query_spice(Error **errp)
+{
+ error_setg(errp, QERR_FEATURE_DISABLED, "spice");
+ return NULL;
+};
+#endif
+
#ifndef TARGET_I386
void qmp_rtc_reset_reinjection(Error **errp)
{
diff --git a/qmp.c b/qmp.c
index b6d531e..884d1ab 100644
--- a/qmp.c
+++ b/qmp.c
@@ -161,22 +161,6 @@ VncInfo2List *qmp_query_vnc_servers(Error **errp)
};
#endif
-#ifndef CONFIG_SPICE
-/*
- * qmp-commands.hx ensures that QMP command query-spice exists only
- * #ifdef CONFIG_SPICE. Necessary for an accurate query-commands
- * result. However, the QAPI schema is blissfully unaware of that,
- * and the QAPI code generator happily generates a dead
- * qmp_marshal_query_spice() that calls qmp_query_spice(). Provide it
- * one, or else linking fails. FIXME Educate the QAPI schema on
- * CONFIG_SPICE.
- */
-SpiceInfo *qmp_query_spice(Error **errp)
-{
- abort();
-};
-#endif
-
void qmp_cont(Error **errp)
{
Error *local_err = NULL;
--
2.9.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [Qemu-devel] [PATCH v2 12/12] Drop qmp-commands.hx
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
` (10 preceding siblings ...)
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 11/12] qmp: update qmp_query_spice fallback marcandre.lureau
@ 2016-07-21 14:00 ` marcandre.lureau
2016-08-05 14:56 ` Markus Armbruster
11 siblings, 1 reply; 44+ messages in thread
From: marcandre.lureau @ 2016-07-21 14:00 UTC (permalink / raw)
To: qemu-devel; +Cc: eblake, armbru, Marc-André Lureau
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Only the documentation remains useful, so strip it. (a later update will
move the documentation in the respective json files and generate the
text file)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
.gitignore | 1 -
MAINTAINERS | 2 +-
Makefile | 3 -
docs/qapi-code-gen.txt | 6 +-
docs/writing-qmp-commands.txt | 38 --
qmp-commands.hx => qmp-commands.txt | 1113 +----------------------------------
6 files changed, 7 insertions(+), 1156 deletions(-)
rename qmp-commands.hx => qmp-commands.txt (87%)
diff --git a/.gitignore b/.gitignore
index 88ec249..0ab8263 100644
--- a/.gitignore
+++ b/.gitignore
@@ -53,7 +53,6 @@
/qemu-bridge-helper
/qemu-monitor.texi
/qemu-monitor-info.texi
-/qmp-commands.txt
/vscclient
/fsdev/virtfs-proxy-helper
*.[1-9]
diff --git a/MAINTAINERS b/MAINTAINERS
index d1439a8..ff52548 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1238,7 +1238,7 @@ M: Markus Armbruster <armbru@redhat.com>
S: Supported
F: qmp.c
F: monitor.c
-F: qmp-commands.hx
+F: qmp-commands.txt
F: docs/*qmp-*
F: scripts/qmp/
T: git git://repo.or.cz/qemu/armbru.git qapi-next
diff --git a/Makefile b/Makefile
index fcdc192..8ec1c3e 100644
--- a/Makefile
+++ b/Makefile
@@ -554,9 +554,6 @@ qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
qemu-monitor-info.texi: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
-qmp-commands.txt: $(SRC_PATH)/qmp-commands.hx $(SRC_PATH)/scripts/hxtool
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -q < $< > $@," GEN $@")
-
qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
diff --git a/docs/qapi-code-gen.txt b/docs/qapi-code-gen.txt
index de298dc..5d4c2cd 100644
--- a/docs/qapi-code-gen.txt
+++ b/docs/qapi-code-gen.txt
@@ -964,9 +964,9 @@ Example:
Used to generate the marshaling/dispatch functions for the commands
defined in the schema. The generated code implements
-qmp_marshal_COMMAND() (mentioned in qmp-commands.hx, and registered
-automatically), and declares qmp_COMMAND() that the user must
-implement. The following files are generated:
+qmp_marshal_COMMAND() (registered automatically), and declares
+qmp_COMMAND() that the user must implement. The following files are
+generated:
$(prefix)qmp-marshal.c: command marshal/dispatch functions for each
QMP command defined in the schema. Functions
diff --git a/docs/writing-qmp-commands.txt b/docs/writing-qmp-commands.txt
index 6208715..cfa6fe7 100644
--- a/docs/writing-qmp-commands.txt
+++ b/docs/writing-qmp-commands.txt
@@ -119,16 +119,6 @@ There are a few things to be noticed:
5. Printing to the terminal is discouraged for QMP commands, we do it here
because it's the easiest way to demonstrate a QMP command
-Now a little hack is needed. As we're still using the old QMP server we need
-to add the new command to its internal dispatch table. This step won't be
-required in the near future. Open the qmp-commands.hx file and add the
-following at the bottom:
-
- {
- .name = "hello-world",
- .args_type = "",
- },
-
You're done. Now build qemu, run it as suggested in the "Testing" section,
and then type the following QMP command:
@@ -173,20 +163,6 @@ There are two important details to be noticed:
2. The C implementation signature must follow the schema's argument ordering,
which is defined by the "data" member
-The last step is to update the qmp-commands.hx file:
-
- {
- .name = "hello-world",
- .args_type = "message:s?",
- },
-
-Notice that the "args_type" member got our "message" argument. The character
-"s" stands for "string" and "?" means it's optional. This too must be ordered
-according to the C implementation and schema file. You can look for more
-examples in the qmp-commands.hx file if you need to define more arguments.
-
-Again, this step won't be required in the future.
-
Time to test our new version of the "hello-world" command. Build qemu, run it as
described in the "Testing" section and then send two commands:
@@ -452,13 +428,6 @@ There are a number of things to be noticed:
6. You have to include the "qmp-commands.h" header file in qemu-timer.c,
otherwise qemu won't build
-The last step is to add the correspoding entry in the qmp-commands.hx file:
-
- {
- .name = "query-alarm-clock",
- .args_type = "",
- },
-
Time to test the new command. Build qemu, run it as described in the "Testing"
section and try this:
@@ -597,13 +566,6 @@ iteration of the loop. That's because the alarm timer method in use is the
first element of the alarm_timers array. Also notice that QAPI lists are handled
by hand and we return the head of the list.
-To test this you have to add the corresponding qmp-commands.hx entry:
-
- {
- .name = "query-alarm-methods",
- .args_type = "",
- },
-
Now Build qemu, run it as explained in the "Testing" section and try our new
command:
diff --git a/qmp-commands.hx b/qmp-commands.txt
similarity index 87%
rename from qmp-commands.hx
rename to qmp-commands.txt
index 1ad8dda..f796342 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.txt
@@ -1,8 +1,3 @@
-HXCOMM QMP dispatch table and documentation
-HXCOMM Text between SQMP and EQMP is copied to the QMP documentation file and
-HXCOMM does not show up in the other formats.
-
-SQMP
QMP Supported Commands
----------------------
@@ -58,14 +53,6 @@ If you're planning to adopt QMP, please observe the following:
Server's responses in the examples below are always a success response, please
refer to the QMP specification for more details on error responses.
-EQMP
-
- {
- .name = "quit",
- .args_type = "",
- },
-
-SQMP
quit
----
@@ -78,14 +65,6 @@ Example:
-> { "execute": "quit" }
<- { "return": {} }
-EQMP
-
- {
- .name = "eject",
- .args_type = "force:-f,device:B",
- },
-
-SQMP
eject
-----
@@ -103,14 +82,6 @@ Example:
Note: The "force" argument defaults to false.
-EQMP
-
- {
- .name = "change",
- .args_type = "device:B,target:F,arg:s?",
- },
-
-SQMP
change
------
@@ -138,14 +109,6 @@ Examples:
"arg": "foobar1" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "screendump",
- .args_type = "filename:F",
- },
-
-SQMP
screendump
----------
@@ -160,14 +123,6 @@ Example:
-> { "execute": "screendump", "arguments": { "filename": "/tmp/image" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "stop",
- .args_type = "",
- },
-
-SQMP
stop
----
@@ -180,14 +135,6 @@ Example:
-> { "execute": "stop" }
<- { "return": {} }
-EQMP
-
- {
- .name = "cont",
- .args_type = "",
- },
-
-SQMP
cont
----
@@ -200,14 +147,6 @@ Example:
-> { "execute": "cont" }
<- { "return": {} }
-EQMP
-
- {
- .name = "system_wakeup",
- .args_type = "",
- },
-
-SQMP
system_wakeup
-------------
@@ -220,14 +159,6 @@ Example:
-> { "execute": "system_wakeup" }
<- { "return": {} }
-EQMP
-
- {
- .name = "system_reset",
- .args_type = "",
- },
-
-SQMP
system_reset
------------
@@ -240,14 +171,6 @@ Example:
-> { "execute": "system_reset" }
<- { "return": {} }
-EQMP
-
- {
- .name = "system_powerdown",
- .args_type = "",
- },
-
-SQMP
system_powerdown
----------------
@@ -260,16 +183,6 @@ Example:
-> { "execute": "system_powerdown" }
<- { "return": {} }
-EQMP
-
- {
- .name = "device_add",
- .args_type = "device:O",
- .params = "driver[,prop=value][,...]",
- .help = "add device, like -device on the command line",
- },
-
-SQMP
device_add
----------
@@ -295,14 +208,6 @@ Notes:
(2) It's possible to list device properties by running QEMU with the
"-device DEVICE,\?" command-line argument, where DEVICE is the device's name
-EQMP
-
- {
- .name = "device_del",
- .args_type = "id:s",
- },
-
-SQMP
device_del
----------
@@ -322,14 +227,6 @@ Example:
-> { "execute": "device_del", "arguments": { "id": "/machine/peripheral-anon/device[0]" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "send-key",
- .args_type = "keys:q,hold-time:i?",
- },
-
-SQMP
send-key
----------
@@ -352,14 +249,6 @@ Example:
{ "type": "qcode", "data": "delete" } ] } }
<- { "return": {} }
-EQMP
-
- {
- .name = "cpu",
- .args_type = "index:i",
- },
-
-SQMP
cpu
---
@@ -376,14 +265,6 @@ Example:
Note: CPUs' indexes are obtained with the 'query-cpus' command.
-EQMP
-
- {
- .name = "cpu-add",
- .args_type = "id:i",
- },
-
-SQMP
cpu-add
-------
@@ -398,14 +279,6 @@ Example:
-> { "execute": "cpu-add", "arguments": { "id": 2 } }
<- { "return": {} }
-EQMP
-
- {
- .name = "memsave",
- .args_type = "val:l,size:i,filename:s,cpu:i?",
- },
-
-SQMP
memsave
-------
@@ -426,14 +299,6 @@ Example:
"filename": "/tmp/virtual-mem-dump" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "pmemsave",
- .args_type = "val:l,size:i,filename:s",
- },
-
-SQMP
pmemsave
--------
@@ -453,14 +318,6 @@ Example:
"filename": "/tmp/physical-mem-dump" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "inject-nmi",
- .args_type = "",
- },
-
-SQMP
inject-nmi
----------
@@ -475,14 +332,6 @@ Example:
Note: inject-nmi fails when the guest doesn't support injecting.
-EQMP
-
- {
- .name = "ringbuf-write",
- .args_type = "device:s,data:s,format:s?",
- },
-
-SQMP
ringbuf-write
-------------
@@ -503,14 +352,6 @@ Example:
"format": "utf8" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "ringbuf-read",
- .args_type = "device:s,size:i,format:s?",
- },
-
-SQMP
ringbuf-read
-------------
@@ -538,14 +379,6 @@ Example:
"format": "utf8" } }
<- {"return": "abcdefgh"}
-EQMP
-
- {
- .name = "xen-save-devices-state",
- .args_type = "filename:F",
- },
-
-SQMP
xen-save-devices-state
-------
@@ -564,14 +397,6 @@ Example:
"arguments": { "filename": "/tmp/save" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "xen-load-devices-state",
- .args_type = "filename:F",
- },
-
-SQMP
xen-load-devices-state
----------------------
@@ -590,14 +415,6 @@ Example:
"arguments": { "filename": "/tmp/resume" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "xen-set-global-dirty-log",
- .args_type = "enable:b",
- },
-
-SQMP
xen-set-global-dirty-log
-------
@@ -613,14 +430,6 @@ Example:
"arguments": { "enable": true } }
<- { "return": {} }
-EQMP
-
- {
- .name = "migrate",
- .args_type = "detach:-d,blk:-b,inc:-i,uri:s",
- },
-
-SQMP
migrate
-------
@@ -645,14 +454,6 @@ Notes:
(3) The user Monitor's "detach" argument is invalid in QMP and should not
be used
-EQMP
-
- {
- .name = "migrate_cancel",
- .args_type = "",
- },
-
-SQMP
migrate_cancel
--------------
@@ -665,14 +466,6 @@ Example:
-> { "execute": "migrate_cancel" }
<- { "return": {} }
-EQMP
-
- {
- .name = "migrate-incoming",
- .args_type = "uri:s",
- },
-
-SQMP
migrate-incoming
----------------
@@ -693,13 +486,6 @@ Notes:
be used
(2) The uri format is the same as for -incoming
-EQMP
- {
- .name = "migrate-set-cache-size",
- .args_type = "value:o",
- },
-
-SQMP
migrate-set-cache-size
----------------------
@@ -715,13 +501,6 @@ Example:
-> { "execute": "migrate-set-cache-size", "arguments": { "value": 536870912 } }
<- { "return": {} }
-EQMP
- {
- .name = "migrate-start-postcopy",
- .args_type = "",
- },
-
-SQMP
migrate-start-postcopy
----------------------
@@ -732,14 +511,6 @@ Example:
-> { "execute": "migrate-start-postcopy" }
<- { "return": {} }
-EQMP
-
- {
- .name = "query-migrate-cache-size",
- .args_type = "",
- },
-
-SQMP
query-migrate-cache-size
------------------------
@@ -753,14 +524,6 @@ Example:
-> { "execute": "query-migrate-cache-size" }
<- { "return": 67108864 }
-EQMP
-
- {
- .name = "migrate_set_speed",
- .args_type = "value:o",
- },
-
-SQMP
migrate_set_speed
-----------------
@@ -775,14 +538,6 @@ Example:
-> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } }
<- { "return": {} }
-EQMP
-
- {
- .name = "migrate_set_downtime",
- .args_type = "value:T",
- },
-
-SQMP
migrate_set_downtime
--------------------
@@ -797,16 +552,6 @@ Example:
-> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } }
<- { "return": {} }
-EQMP
-
- {
- .name = "client_migrate_info",
- .args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
- .params = "protocol hostname port tls-port cert-subject",
- .help = "set migration information for remote display",
- },
-
-SQMP
client_migrate_info
-------------------
@@ -830,16 +575,6 @@ Example:
"port": 1234 } }
<- { "return": {} }
-EQMP
-
- {
- .name = "dump-guest-memory",
- .args_type = "paging:b,protocol:s,detach:b?,begin:i?,end:i?,format:s?",
- .params = "-p protocol [-d] [begin] [length] [format]",
- .help = "dump guest memory to file",
- },
-
-SQMP
dump
@@ -870,14 +605,6 @@ Notes:
(1) All boolean arguments default to false
-EQMP
-
- {
- .name = "query-dump-guest-memory-capability",
- .args_type = "",
- },
-
-SQMP
query-dump-guest-memory-capability
----------
@@ -889,16 +616,6 @@ Example:
<- { "return": { "formats":
["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }
-EQMP
-
- {
- .name = "query-dump",
- .args_type = "",
- .params = "",
- .help = "query background dump status",
- },
-
-SQMP
query-dump
----------
@@ -912,16 +629,6 @@ Example:
<- { "return": { "status": "active", "completed": 1024000,
"total": 2048000 } }
-EQMP
-
-#if defined TARGET_S390X
- {
- .name = "dump-skeys",
- .args_type = "filename:F",
- },
-#endif
-
-SQMP
dump-skeys
----------
@@ -936,14 +643,6 @@ Example:
-> { "execute": "dump-skeys", "arguments": { "filename": "/tmp/skeys" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "netdev_add",
- .args_type = "netdev:O",
- },
-
-SQMP
netdev_add
----------
@@ -966,14 +665,6 @@ Note: The supported device options are the same ones supported by the '-netdev'
command-line argument, which are listed in the '-help' output or QEMU's
manual
-EQMP
-
- {
- .name = "netdev_del",
- .args_type = "id:s",
- },
-
-SQMP
netdev_del
----------
@@ -989,14 +680,6 @@ Example:
<- { "return": {} }
-EQMP
-
- {
- .name = "object-add",
- .args_type = "qom-type:s,id:s,props:q?",
- },
-
-SQMP
object-add
----------
@@ -1014,14 +697,6 @@ Example:
"props": { "filename": "/dev/hwrng" } } }
<- { "return": {} }
-EQMP
-
- {
- .name = "object-del",
- .args_type = "id:s",
- },
-
-SQMP
object-del
----------
@@ -1037,15 +712,6 @@ Example:
<- { "return": {} }
-EQMP
-
-
- {
- .name = "block_resize",
- .args_type = "device:s?,node-name:s?,size:o",
- },
-
-SQMP
block_resize
------------
@@ -1062,14 +728,6 @@ Example:
-> { "execute": "block_resize", "arguments": { "device": "scratch", "size": 1073741824 } }
<- { "return": {} }
-EQMP
-
- {
- .name = "block-stream",
- .args_type = "job-id:s?,device:B,base:s?,speed:o?,backing-file:s?,on-error:s?",
- },
-
-SQMP
block-stream
------------
@@ -1106,14 +764,6 @@ Example:
"base": "/tmp/master.qcow2" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "block-commit",
- .args_type = "job-id:s?,device:B,base:s?,top:s?,backing-file:s?,speed:o?",
- },
-
-SQMP
block-commit
------------
@@ -1170,15 +820,6 @@ Example:
"top": "/tmp/snap1.qcow2" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "drive-backup",
- .args_type = "job-id:s?,sync:s,device:B,target:s,speed:i?,mode:s?,"
- "format:s?,bitmap:s?,on-source-error:s?,on-target-error:s?",
- },
-
-SQMP
drive-backup
------------
@@ -1225,15 +866,6 @@ Example:
"target": "backup.img" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "blockdev-backup",
- .args_type = "job-id:s?,sync:s,device:B,target:B,speed:i?,"
- "on-source-error:s?,on-target-error:s?",
- },
-
-SQMP
blockdev-backup
---------------
@@ -1267,35 +899,6 @@ Example:
"target": "tgt-id" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "block-job-set-speed",
- .args_type = "device:B,speed:o",
- },
-
- {
- .name = "block-job-cancel",
- .args_type = "device:B,force:b?",
- },
- {
- .name = "block-job-pause",
- .args_type = "device:B",
- },
- {
- .name = "block-job-resume",
- .args_type = "device:B",
- },
- {
- .name = "block-job-complete",
- .args_type = "device:B",
- },
- {
- .name = "transaction",
- .args_type = "actions:q,properties:q?",
- },
-
-SQMP
transaction
-----------
@@ -1381,14 +984,6 @@ Example:
"name": "snapshot0" } } ] } }
<- { "return": {} }
-EQMP
-
- {
- .name = "block-dirty-bitmap-add",
- .args_type = "node:B,name:s,granularity:i?",
- },
-
-SQMP
block-dirty-bitmap-add
----------------------
@@ -1408,14 +1003,6 @@ Example:
"name": "bitmap0" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "block-dirty-bitmap-remove",
- .args_type = "node:B,name:s",
- },
-
-SQMP
block-dirty-bitmap-remove
-------------------------
@@ -1435,14 +1022,6 @@ Example:
"name": "bitmap0" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "block-dirty-bitmap-clear",
- .args_type = "node:B,name:s",
- },
-
-SQMP
block-dirty-bitmap-clear
------------------------
@@ -1463,14 +1042,6 @@ Example:
"name": "bitmap0" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "blockdev-snapshot-sync",
- .args_type = "device:s?,node-name:s?,snapshot-file:s,snapshot-node-name:s?,format:s?,mode:s?",
- },
-
-SQMP
blockdev-snapshot-sync
----------------------
@@ -1498,14 +1069,6 @@ Example:
"format": "qcow2" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "blockdev-snapshot",
- .args_type = "node:s,overlay:s",
- },
-
-SQMP
blockdev-snapshot
-----------------
Since 2.5
@@ -1535,14 +1098,6 @@ Example:
"overlay": "node1534" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "blockdev-snapshot-internal-sync",
- .args_type = "device:B,name:s",
- },
-
-SQMP
blockdev-snapshot-internal-sync
-------------------------------
@@ -1563,14 +1118,6 @@ Example:
}
<- { "return": {} }
-EQMP
-
- {
- .name = "blockdev-snapshot-delete-internal-sync",
- .args_type = "device:B,id:s?,name:s?",
- },
-
-SQMP
blockdev-snapshot-delete-internal-sync
--------------------------------------
@@ -1602,18 +1149,6 @@ Example:
}
}
-EQMP
-
- {
- .name = "drive-mirror",
- .args_type = "job-id:s?,sync:s,device:B,target:s,speed:i?,mode:s?,"
- "format:s?,node-name:s?,replaces:s?,"
- "on-source-error:s?,on-target-error:s?,"
- "unmap:b?,"
- "granularity:i?,buf-size:i?",
- },
-
-SQMP
drive-mirror
------------
@@ -1667,16 +1202,6 @@ Example:
"format": "qcow2" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "blockdev-mirror",
- .args_type = "job-id:s?,sync:s,device:B,target:B,replaces:s?,speed:i?,"
- "on-source-error:s?,on-target-error:s?,"
- "granularity:i?,buf-size:i?",
- },
-
-SQMP
blockdev-mirror
------------
@@ -1717,13 +1242,6 @@ Example:
"sync": "full" } }
<- { "return": {} }
-EQMP
- {
- .name = "change-backing-file",
- .args_type = "device:s,image-node-name:s,backing-file:s",
- },
-
-SQMP
change-backing-file
-------------------
Since: 2.1
@@ -1754,14 +1272,6 @@ Arguments:
Returns: Nothing on success
If "device" does not exist or cannot be determined, DeviceNotFound
-EQMP
-
- {
- .name = "balloon",
- .args_type = "value:M",
- },
-
-SQMP
balloon
-------
@@ -1776,14 +1286,6 @@ Example:
-> { "execute": "balloon", "arguments": { "value": 536870912 } }
<- { "return": {} }
-EQMP
-
- {
- .name = "set_link",
- .args_type = "name:s,up:b",
- },
-
-SQMP
set_link
--------
@@ -1799,16 +1301,6 @@ Example:
-> { "execute": "set_link", "arguments": { "name": "e1000.0", "up": false } }
<- { "return": {} }
-EQMP
-
- {
- .name = "getfd",
- .args_type = "fdname:s",
- .params = "getfd name",
- .help = "receive a file descriptor via SCM rights and assign it a name",
- },
-
-SQMP
getfd
-----
@@ -1831,16 +1323,6 @@ Notes:
(2) The 'closefd' command can be used to explicitly close the file
descriptor when it is no longer needed.
-EQMP
-
- {
- .name = "closefd",
- .args_type = "fdname:s",
- .params = "closefd name",
- .help = "close a file descriptor previously passed via SCM rights",
- },
-
-SQMP
closefd
-------
@@ -1855,16 +1337,6 @@ Example:
-> { "execute": "closefd", "arguments": { "fdname": "fd1" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "add-fd",
- .args_type = "fdset-id:i?,opaque:s?",
- .params = "add-fd fdset-id opaque",
- .help = "Add a file descriptor, that was passed via SCM rights, to an fd set",
- },
-
-SQMP
add-fd
-------
@@ -1893,16 +1365,6 @@ Notes:
(1) The list of fd sets is shared by all monitor connections.
(2) If "fdset-id" is not specified, a new fd set will be created.
-EQMP
-
- {
- .name = "remove-fd",
- .args_type = "fdset-id:i,fd:i?",
- .params = "remove-fd fdset-id fd",
- .help = "Remove a file descriptor from an fd set",
- },
-
-SQMP
remove-fd
---------
@@ -1925,15 +1387,6 @@ Notes:
(2) If "fd" is not specified, all file descriptors in "fdset-id" will be
removed.
-EQMP
-
- {
- .name = "query-fdsets",
- .args_type = "",
- .help = "Return information describing all fd sets",
- },
-
-SQMP
query-fdsets
-------------
@@ -1974,14 +1427,6 @@ Example:
Note: The list of fd sets is shared by all monitor connections.
-EQMP
-
- {
- .name = "block_passwd",
- .args_type = "device:s?,node-name:s?,password:s",
- },
-
-SQMP
block_passwd
------------
@@ -1999,14 +1444,6 @@ Example:
"password": "12345" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "block_set_io_throttle",
- .args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l,bps_max:l?,bps_rd_max:l?,bps_wr_max:l?,iops_max:l?,iops_rd_max:l?,iops_wr_max:l?,bps_max_length:l?,bps_rd_max_length:l?,bps_wr_max_length:l?,iops_max_length:l?,iops_rd_max_length:l?,iops_wr_max_length:l?,iops_size:l?,group:s?",
- },
-
-SQMP
block_set_io_throttle
------------
@@ -2055,14 +1492,6 @@ Example:
"iops_size": 0 } }
<- { "return": {} }
-EQMP
-
- {
- .name = "set_password",
- .args_type = "protocol:s,password:s,connected:s?",
- },
-
-SQMP
set_password
------------
@@ -2080,14 +1509,6 @@ Example:
"password": "secret" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "expire_password",
- .args_type = "protocol:s,time:s",
- },
-
-SQMP
expire_password
---------------
@@ -2104,14 +1525,6 @@ Example:
"time": "+60" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "add_client",
- .args_type = "protocol:s,fdname:s,skipauth:b?,tls:b?",
- },
-
-SQMP
add_client
----------
@@ -2130,15 +1543,6 @@ Example:
"fdname": "myclient" } }
<- { "return": {} }
-EQMP
- {
- .name = "qmp_capabilities",
- .args_type = "",
- .params = "",
- .help = "enable QMP capabilities",
- },
-
-SQMP
qmp_capabilities
----------------
@@ -2153,14 +1557,6 @@ Example:
Note: This command must be issued before issuing any other command.
-EQMP
-
- {
- .name = "human-monitor-command",
- .args_type = "command-line:s,cpu-index:i?",
- },
-
-SQMP
human-monitor-command
---------------------
@@ -2197,13 +1593,7 @@ Notes:
3. Query Commands
=================
-HXCOMM Each query command below is inside a SQMP/EQMP section, do NOT change
-HXCOMM this! We will possibly move query commands definitions inside those
-HXCOMM sections, just like regular commands.
-
-EQMP
-SQMP
query-version
-------------
@@ -2231,14 +1621,6 @@ Example:
}
}
-EQMP
-
- {
- .name = "query-version",
- .args_type = "",
- },
-
-SQMP
query-commands
--------------
@@ -2267,14 +1649,6 @@ Example:
Note: This example has been shortened as the real response is too long.
-EQMP
-
- {
- .name = "query-commands",
- .args_type = "",
- },
-
-SQMP
query-events
--------------
@@ -2303,14 +1677,6 @@ Example:
Note: This example has been shortened as the real response is too long.
-EQMP
-
- {
- .name = "query-events",
- .args_type = "",
- },
-
-SQMP
query-qmp-schema
----------------
@@ -2319,14 +1685,6 @@ named schema entities. Entities are commands, events and various
types. See docs/qapi-code-gen.txt for information on their structure
and intended use.
-EQMP
-
- {
- .name = "query-qmp-schema",
- .args_type = "",
- },
-
-SQMP
query-chardev
-------------
@@ -2363,14 +1721,6 @@ Example:
]
}
-EQMP
-
- {
- .name = "query-chardev",
- .args_type = "",
- },
-
-SQMP
query-chardev-backends
-------------
@@ -2403,14 +1753,6 @@ Example:
]
}
-EQMP
-
- {
- .name = "query-chardev-backends",
- .args_type = "",
- },
-
-SQMP
query-block
-----------
@@ -2586,14 +1928,6 @@ Example:
]
}
-EQMP
-
- {
- .name = "query-block",
- .args_type = "",
- },
-
-SQMP
query-blockstats
----------------
@@ -2782,14 +2116,6 @@ Example:
]
}
-EQMP
-
- {
- .name = "query-blockstats",
- .args_type = "query-nodes:b?",
- },
-
-SQMP
query-cpus
----------
@@ -2836,14 +2162,6 @@ Example:
]
}
-EQMP
-
- {
- .name = "query-cpus",
- .args_type = "",
- },
-
-SQMP
query-iothreads
---------------
@@ -2874,14 +2192,6 @@ Example:
]
}
-EQMP
-
- {
- .name = "query-iothreads",
- .args_type = "",
- },
-
-SQMP
query-pci
---------
@@ -3090,14 +2400,6 @@ Example:
Note: This example has been shortened as the real response is too long.
-EQMP
-
- {
- .name = "query-pci",
- .args_type = "",
- },
-
-SQMP
query-kvm
---------
@@ -3113,14 +2415,6 @@ Example:
-> { "execute": "query-kvm" }
<- { "return": { "enabled": true, "present": true } }
-EQMP
-
- {
- .name = "query-kvm",
- .args_type = "",
- },
-
-SQMP
query-status
------------
@@ -3152,14 +2446,6 @@ Example:
-> { "execute": "query-status" }
<- { "return": { "running": true, "singlestep": false, "status": "running" } }
-EQMP
-
- {
- .name = "query-status",
- .args_type = "",
- },
-
-SQMP
query-mice
----------
@@ -3195,14 +2481,6 @@ Example:
]
}
-EQMP
-
- {
- .name = "query-mice",
- .args_type = "",
- },
-
-SQMP
query-vnc
---------
@@ -3257,18 +2535,6 @@ Example:
}
}
-EQMP
-
- {
- .name = "query-vnc",
- .args_type = "",
- },
- {
- .name = "query-vnc-servers",
- .args_type = "",
- },
-
-SQMP
query-spice
-----------
@@ -3336,16 +2602,6 @@ Example:
}
}
-EQMP
-
-#if defined(CONFIG_SPICE)
- {
- .name = "query-spice",
- .args_type = "",
- },
-#endif
-
-SQMP
query-name
----------
@@ -3360,14 +2616,6 @@ Example:
-> { "execute": "query-name" }
<- { "return": { "name": "qemu-name" } }
-EQMP
-
- {
- .name = "query-name",
- .args_type = "",
- },
-
-SQMP
query-uuid
----------
@@ -3382,14 +2630,6 @@ Example:
-> { "execute": "query-uuid" }
<- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
-EQMP
-
- {
- .name = "query-uuid",
- .args_type = "",
- },
-
-SQMP
query-command-line-options
--------------------------
@@ -3430,14 +2670,6 @@ Example:
]
}
-EQMP
-
- {
- .name = "query-command-line-options",
- .args_type = "option:s?",
- },
-
-SQMP
query-migrate
-------------
@@ -3607,14 +2839,6 @@ Examples:
}
}
-EQMP
-
- {
- .name = "query-migrate",
- .args_type = "",
- },
-
-SQMP
migrate-set-capabilities
------------------------
@@ -3635,14 +2859,6 @@ Example:
-> { "execute": "migrate-set-capabilities" , "arguments":
{ "capabilities": [ { "capability": "xbzrle", "state": true } ] } }
-EQMP
-
- {
- .name = "migrate-set-capabilities",
- .args_type = "capabilities:q",
- .params = "capability:s,state:b",
- },
-SQMP
query-migrate-capabilities
--------------------------
@@ -3672,14 +2888,6 @@ Example:
{"state": false, "capability": "postcopy-ram"}
]}
-EQMP
-
- {
- .name = "query-migrate-capabilities",
- .args_type = "",
- },
-
-SQMP
migrate-set-parameters
----------------------
@@ -3700,14 +2908,6 @@ Example:
-> { "execute": "migrate-set-parameters" , "arguments":
{ "compress-level": 1 } }
-EQMP
-
- {
- .name = "migrate-set-parameters",
- .args_type =
- "compress-level:i?,compress-threads:i?,decompress-threads:i?,cpu-throttle-initial:i?,cpu-throttle-increment:i?",
- },
-SQMP
query-migrate-parameters
------------------------
@@ -3737,14 +2937,6 @@ Example:
}
}
-EQMP
-
- {
- .name = "query-migrate-parameters",
- .args_type = "",
- },
-
-SQMP
query-balloon
-------------
@@ -3764,81 +2956,6 @@ Example:
}
}
-EQMP
-
- {
- .name = "query-balloon",
- .args_type = "",
- },
-
- {
- .name = "query-block-jobs",
- .args_type = "",
- },
-
- {
- .name = "qom-list",
- .args_type = "path:s",
- },
-
- {
- .name = "qom-set",
- .args_type = "path:s,property:s,value:q",
- },
-
- {
- .name = "qom-get",
- .args_type = "path:s,property:s",
- },
-
- {
- .name = "nbd-server-start",
- .args_type = "addr:q,tls-creds:s?",
- },
- {
- .name = "nbd-server-add",
- .args_type = "device:B,writable:b?",
- },
- {
- .name = "nbd-server-stop",
- .args_type = "",
- },
-
- {
- .name = "change-vnc-password",
- .args_type = "password:s",
- },
- {
- .name = "qom-list-types",
- .args_type = "implements:s?,abstract:b?",
- },
-
- {
- .name = "device-list-properties",
- .args_type = "typename:s",
- },
-
- {
- .name = "query-machines",
- .args_type = "",
- },
-
- {
- .name = "query-cpu-definitions",
- .args_type = "",
- },
-
- {
- .name = "query-target",
- .args_type = "",
- },
-
- {
- .name = "query-tpm",
- .args_type = "",
- },
-
-SQMP
query-tpm
---------
@@ -3864,14 +2981,6 @@ Example:
]
}
-EQMP
-
- {
- .name = "query-tpm-models",
- .args_type = "",
- },
-
-SQMP
query-tpm-models
----------------
@@ -3884,14 +2993,6 @@ Example:
-> { "execute": "query-tpm-models" }
<- { "return": [ "tpm-tis" ] }
-EQMP
-
- {
- .name = "query-tpm-types",
- .args_type = "",
- },
-
-SQMP
query-tpm-types
---------------
@@ -3904,14 +3005,6 @@ Example:
-> { "execute": "query-tpm-types" }
<- { "return": [ "passthrough" ] }
-EQMP
-
- {
- .name = "chardev-add",
- .args_type = "id:s,backend:q",
- },
-
-SQMP
chardev-add
----------------
@@ -3940,15 +3033,6 @@ Examples:
"backend" : { "type" : "pty", "data" : {} } } }
<- { "return": { "pty" : "/dev/pty/42" } }
-EQMP
-
- {
- .name = "chardev-remove",
- .args_type = "id:s",
- },
-
-
-SQMP
chardev-remove
--------------
@@ -3963,13 +3047,6 @@ Example:
-> { "execute": "chardev-remove", "arguments": { "id" : "foo" } }
<- { "return": {} }
-EQMP
- {
- .name = "query-rx-filter",
- .args_type = "name:s?",
- },
-
-SQMP
query-rx-filter
---------------
@@ -4027,14 +3104,6 @@ Example:
]
}
-EQMP
-
- {
- .name = "blockdev-add",
- .args_type = "options:q",
- },
-
-SQMP
blockdev-add
------------
@@ -4085,14 +3154,6 @@ Example (2):
<- { "return": {} }
-EQMP
-
- {
- .name = "x-blockdev-del",
- .args_type = "id:s?,node-name:s?",
- },
-
-SQMP
x-blockdev-del
------------
Since 2.5
@@ -4141,14 +3202,6 @@ Example:
}
<- { "return": {} }
-EQMP
-
- {
- .name = "blockdev-open-tray",
- .args_type = "device:s,force:b?",
- },
-
-SQMP
blockdev-open-tray
------------------
@@ -4188,14 +3241,6 @@ Example:
<- { "return": {} }
-EQMP
-
- {
- .name = "blockdev-close-tray",
- .args_type = "device:s",
- },
-
-SQMP
blockdev-close-tray
-------------------
@@ -4222,14 +3267,6 @@ Example:
<- { "return": {} }
-EQMP
-
- {
- .name = "x-blockdev-remove-medium",
- .args_type = "device:s",
- },
-
-SQMP
x-blockdev-remove-medium
------------------------
@@ -4269,14 +3306,6 @@ Example:
<- { "return": {} }
-EQMP
-
- {
- .name = "x-blockdev-insert-medium",
- .args_type = "device:s,node-name:s",
- },
-
-SQMP
x-blockdev-insert-medium
------------------------
@@ -4308,14 +3337,6 @@ Example:
<- { "return": {} }
-EQMP
-
- {
- .name = "x-blockdev-change",
- .args_type = "parent:B,child:B?,node:B?",
- },
-
-SQMP
x-blockdev-change
-----------------
@@ -4360,15 +3381,7 @@ Delete a quorum's node
"child": "children.1" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "query-named-block-nodes",
- .args_type = "",
- },
-
-SQMP
-@query-named-block-nodes
+query-named-block-nodes
------------------------
Return a list of BlockDeviceInfo for all the named block driver nodes
@@ -4421,14 +3434,6 @@ Example:
}
} } ] }
-EQMP
-
- {
- .name = "blockdev-change-medium",
- .args_type = "device:B,filename:F,format:s?,read-only-mode:s?",
- },
-
-SQMP
blockdev-change-medium
----------------------
@@ -4473,14 +3478,6 @@ Examples:
<- { "return": {} }
-EQMP
-
- {
- .name = "query-memdev",
- .args_type = "",
- },
-
-SQMP
query-memdev
------------
@@ -4510,15 +3507,7 @@ Example (1):
]
}
-EQMP
-
- {
- .name = "query-memory-devices",
- .args_type = "",
- },
-
-SQMP
-@query-memory-devices
+query-memory-devices
--------------------
Return a list of memory devices.
@@ -4536,15 +3525,8 @@ Example:
"slot": 0},
"type": "dimm"
} ] }
-EQMP
-
- {
- .name = "query-acpi-ospm-status",
- .args_type = "",
- },
-SQMP
-@query-acpi-ospm-status
+query-acpi-ospm-status
--------------------
Return list of ACPIOSTInfo for devices that support status reporting
@@ -4557,16 +3539,7 @@ Example:
{ "slot": "2", "slot-type": "DIMM", "source": 0, "status": 0},
{ "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0}
]}
-EQMP
-#if defined TARGET_I386
- {
- .name = "rtc-reset-reinjection",
- .args_type = "",
- },
-#endif
-
-SQMP
rtc-reset-reinjection
---------------------
@@ -4578,14 +3551,7 @@ Example:
-> { "execute": "rtc-reset-reinjection" }
<- { "return": {} }
-EQMP
-
- {
- .name = "trace-event-get-state",
- .args_type = "name:s,vcpu:i?",
- },
-SQMP
trace-event-get-state
---------------------
@@ -4609,14 +3575,7 @@ Example:
-> { "execute": "trace-event-get-state", "arguments": { "name": "qemu_memalign" } }
<- { "return": [ { "name": "qemu_memalign", "state": "disabled" } ] }
-EQMP
- {
- .name = "trace-event-set-state",
- .args_type = "name:s,enable:b,ignore-unavailable:b?,vcpu:i?",
- },
-
-SQMP
trace-event-set-state
---------------------
@@ -4643,14 +3602,6 @@ Example:
-> { "execute": "trace-event-set-state", "arguments": { "name": "qemu_memalign", "enable": "true" } }
<- { "return": {} }
-EQMP
-
- {
- .name = "input-send-event",
- .args_type = "console:i?,events:q",
- },
-
-SQMP
@input-send-event
-----------------
@@ -4708,14 +3659,6 @@ Move mouse pointer to absolute coordinates (20000, 400).
{ "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } }
<- { "return": {} }
-EQMP
-
- {
- .name = "block-set-write-threshold",
- .args_type = "node-name:s,write-threshold:l",
- },
-
-SQMP
block-set-write-threshold
------------
@@ -4735,14 +3678,6 @@ Example:
"write-threshold": 17179869184 } }
<- { "return": {} }
-EQMP
-
- {
- .name = "query-rocker",
- .args_type = "name:s",
- },
-
-SQMP
Show rocker switch
------------------
@@ -4755,14 +3690,6 @@ Example:
-> { "execute": "query-rocker", "arguments": { "name": "sw1" } }
<- { "return": {"name": "sw1", "ports": 2, "id": 1327446905938}}
-EQMP
-
- {
- .name = "query-rocker-ports",
- .args_type = "name:s",
- },
-
-SQMP
Show rocker switch ports
------------------------
@@ -4779,14 +3706,6 @@ Example:
"autoneg": "off", "link-up": true, "speed": 10000}
]}
-EQMP
-
- {
- .name = "query-rocker-of-dpa-flows",
- .args_type = "name:s,tbl-id:i?",
- },
-
-SQMP
Show rocker switch OF-DPA flow tables
-------------------------------------
@@ -4807,14 +3726,6 @@ Example:
{...more...},
]}
-EQMP
-
- {
- .name = "query-rocker-of-dpa-groups",
- .args_type = "name:s,type:i?",
- },
-
-SQMP
Show rocker OF-DPA group tables
-------------------------------
@@ -4836,16 +3747,6 @@ Example:
"pop-vlan": 1, "id": 251658240}
]}
-EQMP
-
-#if defined TARGET_ARM
- {
- .name = "query-gic-capabilities",
- .args_type = "",
- },
-#endif
-
-SQMP
query-gic-capabilities
---------------
@@ -4860,14 +3761,6 @@ Example:
<- { "return": [{ "version": 2, "emulated": true, "kernel": false },
{ "version": 3, "emulated": false, "kernel": true } ] }
-EQMP
-
- {
- .name = "query-hotpluggable-cpus",
- .args_type = "",
- },
-
-SQMP
Show existing/possible CPUs
---------------------------
--
2.9.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 02/12] qapi-schema: add 'device_add'
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 02/12] qapi-schema: add 'device_add' marcandre.lureau
@ 2016-07-21 20:44 ` Eric Blake
2016-07-22 7:13 ` Marc-André Lureau
2016-08-05 12:10 ` Markus Armbruster
1 sibling, 1 reply; 44+ messages in thread
From: Eric Blake @ 2016-07-21 20:44 UTC (permalink / raw)
To: marcandre.lureau, qemu-devel; +Cc: armbru
[-- Attachment #1: Type: text/plain, Size: 1892 bytes --]
On 07/21/2016 08:00 AM, marcandre.lureau@redhat.com wrote:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Even though device_add is not fully qapi'fied, we may add it to the json
> schema with 'gen': false, so registration and documentation can be
> generated.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> qapi-schema.json | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
> +++ b/qapi-schema.json
> @@ -2200,6 +2200,35 @@
> ##
> { 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } }
>
> +##
> +# @device_add:
> +#
> +# @driver: the name of the new device's driver
> +# @bus: #optional the device's parent bus (device tree path)
> +# @id: the device's ID, must be unique
> +# @props: #optional a dictionary of properties to be passed to the backend
> +#
> +# Add a device.
> +#
> +# Notes:
> +# 1. For detailed information about this command, please refer to the
> +# 'docs/qdev-device-use.txt' file.
> +#
> +# 2. It's possible to list device properties by running QEMU with the
> +# "-device DEVICE,help" command-line argument, where DEVICE is the
> +# device's name
> +#
> +# Example:
> +#
> +# -> { "execute": "device_add",
> +# "arguments": { "driver": "e1000", "id": "net1" } }
Is it worth an example that includes 'bus' and/or 'props'?
> +# <- { "return": {} }
> +#
> +# Since: 0.13
> +##
> +{ 'command': 'device_add',
> + 'data': {'driver': 'str', 'id': 'str'}, 'gen': false }
The documentation mentions fields not listed here, but the 'gen':false
explains why. We may yet get device_add QAPIfied for 2.8, but there's
nothing wrong with documenting things now.
Reviewed-by: Eric Blake <eblake@redhat.com>
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 604 bytes --]
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 03/12] monitor: register gen:false commands manually
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 03/12] monitor: register gen:false commands manually marcandre.lureau
@ 2016-07-21 20:50 ` Eric Blake
0 siblings, 0 replies; 44+ messages in thread
From: Eric Blake @ 2016-07-21 20:50 UTC (permalink / raw)
To: marcandre.lureau, qemu-devel; +Cc: armbru
[-- Attachment #1: Type: text/plain, Size: 1227 bytes --]
On 07/21/2016 08:00 AM, marcandre.lureau@redhat.com wrote:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Since a few commands are using 'gen': false, they are not registered
> automatically by the generator. Register manually instead.
>
> This is in preparation for removal of qapi 'middle' mode generation.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> Reviewed-by: Eric Blake <eblake@redhat.com>
> ---
> monitor.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> +static void qmp_init_marshal(void)
> +{
> + qmp_register_command("query-qmp-schema", qmp_query_qmp_schema,
> + QCO_NO_OPTIONS);
> + qmp_register_command("device_add", qmp_device_add,
> + QCO_NO_OPTIONS);
> + qmp_register_command("netdev_add", qmp_netdev_add,
> + QCO_NO_OPTIONS);
Of course, if my netdev_add patch goes in first (currently on Markus'
qapi-not-next branch, because we decided it was too risky for 2.7 hard
freeze), then this last line is not needed.
R-b still stands.
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 604 bytes --]
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 05/12] monitor: register the qapi generated commands
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 05/12] monitor: register the qapi generated commands marcandre.lureau
@ 2016-07-21 20:56 ` Eric Blake
2016-08-05 12:42 ` Markus Armbruster
1 sibling, 0 replies; 44+ messages in thread
From: Eric Blake @ 2016-07-21 20:56 UTC (permalink / raw)
To: marcandre.lureau, qemu-devel; +Cc: armbru
[-- Attachment #1: Type: text/plain, Size: 879 bytes --]
On 07/21/2016 08:00 AM, marcandre.lureau@redhat.com wrote:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Stop using the so-called 'middle' mode. Instead, use qmp_find_command()
> from generated qapi commands registry.
>
> Note: this commit requires a 'make clean' prior to make, since the
> generated files do not depend on Makefile (due to a cyclic rule
> introduced in 4115852bb0).
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> monitor.c | 15 ++++--
> Makefile | 2 +-
> qmp-commands.hx | 143 --------------------------------------------------------
> vl.c | 1 +
> 4 files changed, 13 insertions(+), 148 deletions(-)
>
Reviewed-by: Eric Blake <eblake@redhat.com>
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 604 bytes --]
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 06/12] monitor: remove mhandler.cmd_new
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 06/12] monitor: remove mhandler.cmd_new marcandre.lureau
@ 2016-07-21 21:02 ` Eric Blake
2016-07-22 7:20 ` Marc-André Lureau
2016-08-05 12:52 ` Markus Armbruster
1 sibling, 1 reply; 44+ messages in thread
From: Eric Blake @ 2016-07-21 21:02 UTC (permalink / raw)
To: marcandre.lureau, qemu-devel; +Cc: armbru
[-- Attachment #1: Type: text/plain, Size: 951 bytes --]
On 07/21/2016 08:00 AM, marcandre.lureau@redhat.com wrote:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> This is no longer necessary, now that middle mode has been removed.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> monitor.c | 13 +--
> docs/writing-qmp-commands.txt | 8 +-
> hmp-commands-info.hx | 118 ++++++++++++------------
> hmp-commands.hx | 208 +++++++++++++++++++++---------------------
> 4 files changed, 170 insertions(+), 177 deletions(-)
>
> +++ b/docs/writing-qmp-commands.txt
> @@ -459,7 +457,6 @@ The last step is to add the correspoding entry in the qmp-commands.hx file:
> {
Might be worth s/correspoding/corresponding/ while touching this file.
Reviewed-by: Eric Blake <eblake@redhat.com>
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 604 bytes --]
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 07/12] monitor: implement 'qmp_query_commands' without qmp_cmds
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 07/12] monitor: implement 'qmp_query_commands' without qmp_cmds marcandre.lureau
@ 2016-07-21 22:51 ` Eric Blake
2016-08-05 13:25 ` Markus Armbruster
1 sibling, 0 replies; 44+ messages in thread
From: Eric Blake @ 2016-07-21 22:51 UTC (permalink / raw)
To: marcandre.lureau, qemu-devel; +Cc: armbru
[-- Attachment #1: Type: text/plain, Size: 519 bytes --]
On 07/21/2016 08:00 AM, marcandre.lureau@redhat.com wrote:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> So we can get rid of the static qmp_cmds table.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> monitor.c | 32 ++++++++++++++------------------
> 1 file changed, 14 insertions(+), 18 deletions(-)
>
Reviewed-by: Eric Blake <eblake@redhat.com>
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 604 bytes --]
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 08/12] build-sys: remove qmp-commands-old.h
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 08/12] build-sys: remove qmp-commands-old.h marcandre.lureau
@ 2016-07-21 22:52 ` Eric Blake
0 siblings, 0 replies; 44+ messages in thread
From: Eric Blake @ 2016-07-21 22:52 UTC (permalink / raw)
To: marcandre.lureau, qemu-devel; +Cc: armbru
[-- Attachment #1: Type: text/plain, Size: 442 bytes --]
On 07/21/2016 08:00 AM, marcandre.lureau@redhat.com wrote:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> Makefile.target | 7 ++-----
> 1 file changed, 2 insertions(+), 5 deletions(-)
>
Reviewed-by: Eric Blake <eblake@redhat.com>
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 604 bytes --]
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 09/12] qapi: remove the "middle" mode
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 09/12] qapi: remove the "middle" mode marcandre.lureau
@ 2016-07-21 22:55 ` Eric Blake
2016-07-22 7:35 ` Marc-André Lureau
2016-08-05 13:31 ` Markus Armbruster
1 sibling, 1 reply; 44+ messages in thread
From: Eric Blake @ 2016-07-21 22:55 UTC (permalink / raw)
To: marcandre.lureau, qemu-devel; +Cc: armbru
[-- Attachment #1: Type: text/plain, Size: 1627 bytes --]
On 07/21/2016 08:00 AM, marcandre.lureau@redhat.com wrote:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Now that the register function is always generated, we can
> remove the so-called "middle" mode from the generator script.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> scripts/qapi-commands.py | 29 +++++------------------------
> 1 file changed, 5 insertions(+), 24 deletions(-)
>
> diff --git a/scripts/qapi-commands.py b/scripts/qapi-commands.py
> index a06a2c4..4754ae0 100644
> --- a/scripts/qapi-commands.py
> +++ b/scripts/qapi-commands.py
> @@ -84,17 +84,8 @@ static void qmp_marshal_output_%(c_name)s(%(c_type)s ret_in, QObject **ret_out,
>
>
> def gen_marshal_proto(name):
> - ret = 'void qmp_marshal_%s(QDict *args, QObject **ret, Error **errp)' % c_name(name)
> - if not middle_mode:
> - ret = 'static ' + ret
> - return ret
> -
> -
> -def gen_marshal_decl(name):
> - return mcgen('''
> -%(proto)s;
> -''',
> - proto=gen_marshal_proto(name))
> + return 'static void qmp_marshal_%s' % c_name(name) + \
> + '(QDict *args, QObject **ret, Error **errp)'
I'm wondering if this should be:
return mcgen('''
static void qmp_marshal_%(c_name)s(QDict *args, QObject **ret, Error **errp)
''',
c_name=c_name(name))
for consistency with our other code (I'm not sure why we weren't already
using mcgen(), though).
Otherwise, nice to see it go!
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 604 bytes --]
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 02/12] qapi-schema: add 'device_add'
2016-07-21 20:44 ` Eric Blake
@ 2016-07-22 7:13 ` Marc-André Lureau
0 siblings, 0 replies; 44+ messages in thread
From: Marc-André Lureau @ 2016-07-22 7:13 UTC (permalink / raw)
To: Eric Blake; +Cc: QEMU, Markus Armbruster
Hi
On Fri, Jul 22, 2016 at 12:44 AM, Eric Blake <eblake@redhat.com> wrote:
> On 07/21/2016 08:00 AM, marcandre.lureau@redhat.com wrote:
>> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>>
>> Even though device_add is not fully qapi'fied, we may add it to the json
>> schema with 'gen': false, so registration and documentation can be
>> generated.
>>
>> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
>> ---
>> qapi-schema.json | 29 +++++++++++++++++++++++++++++
>> 1 file changed, 29 insertions(+)
>
>
>> +++ b/qapi-schema.json
>> @@ -2200,6 +2200,35 @@
>> ##
>> { 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } }
>>
>> +##
>> +# @device_add:
>> +#
>> +# @driver: the name of the new device's driver
>> +# @bus: #optional the device's parent bus (device tree path)
>> +# @id: the device's ID, must be unique
>> +# @props: #optional a dictionary of properties to be passed to the backend
>> +#
>> +# Add a device.
>> +#
>> +# Notes:
>> +# 1. For detailed information about this command, please refer to the
>> +# 'docs/qdev-device-use.txt' file.
>> +#
>> +# 2. It's possible to list device properties by running QEMU with the
>> +# "-device DEVICE,help" command-line argument, where DEVICE is the
>> +# device's name
>> +#
>> +# Example:
>> +#
>> +# -> { "execute": "device_add",
>> +# "arguments": { "driver": "e1000", "id": "net1" } }
>
> Is it worth an example that includes 'bus' and/or 'props'?
done
>
>> +# <- { "return": {} }
>> +#
>> +# Since: 0.13
>> +##
>> +{ 'command': 'device_add',
>> + 'data': {'driver': 'str', 'id': 'str'}, 'gen': false }
>
> The documentation mentions fields not listed here, but the 'gen':false
> explains why. We may yet get device_add QAPIfied for 2.8, but there's
> nothing wrong with documenting things now.
>
> Reviewed-by: Eric Blake <eblake@redhat.com>
>
>
> --
> Eric Blake eblake redhat com +1-919-301-3266
> Libvirt virtualization library http://libvirt.org
>
--
Marc-André Lureau
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 06/12] monitor: remove mhandler.cmd_new
2016-07-21 21:02 ` Eric Blake
@ 2016-07-22 7:20 ` Marc-André Lureau
0 siblings, 0 replies; 44+ messages in thread
From: Marc-André Lureau @ 2016-07-22 7:20 UTC (permalink / raw)
To: Eric Blake; +Cc: QEMU, Markus Armbruster
Hi
On Fri, Jul 22, 2016 at 1:02 AM, Eric Blake <eblake@redhat.com> wrote:
> Might be worth s/correspoding/corresponding/ while touching this file.
sure, (although this block goes away with the last patch)
--
Marc-André Lureau
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 09/12] qapi: remove the "middle" mode
2016-07-21 22:55 ` Eric Blake
@ 2016-07-22 7:35 ` Marc-André Lureau
0 siblings, 0 replies; 44+ messages in thread
From: Marc-André Lureau @ 2016-07-22 7:35 UTC (permalink / raw)
To: Eric Blake; +Cc: QEMU, Markus Armbruster
Hi
On Fri, Jul 22, 2016 at 2:55 AM, Eric Blake <eblake@redhat.com> wrote:
> On 07/21/2016 08:00 AM, marcandre.lureau@redhat.com wrote:
>> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>>
>> Now that the register function is always generated, we can
>> remove the so-called "middle" mode from the generator script.
>>
>> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
>> ---
>> scripts/qapi-commands.py | 29 +++++------------------------
>> 1 file changed, 5 insertions(+), 24 deletions(-)
>>
>> diff --git a/scripts/qapi-commands.py b/scripts/qapi-commands.py
>> index a06a2c4..4754ae0 100644
>> --- a/scripts/qapi-commands.py
>> +++ b/scripts/qapi-commands.py
>> @@ -84,17 +84,8 @@ static void qmp_marshal_output_%(c_name)s(%(c_type)s ret_in, QObject **ret_out,
>>
>>
>> def gen_marshal_proto(name):
>> - ret = 'void qmp_marshal_%s(QDict *args, QObject **ret, Error **errp)' % c_name(name)
>> - if not middle_mode:
>> - ret = 'static ' + ret
>> - return ret
>> -
>> -
>> -def gen_marshal_decl(name):
>> - return mcgen('''
>> -%(proto)s;
>> -''',
>> - proto=gen_marshal_proto(name))
>> + return 'static void qmp_marshal_%s' % c_name(name) + \
>> + '(QDict *args, QObject **ret, Error **errp)'
>
> I'm wondering if this should be:
>
> return mcgen('''
> static void qmp_marshal_%(c_name)s(QDict *args, QObject **ret, Error **errp)
> ''',
> c_name=c_name(name))
>
> for consistency with our other code (I'm not sure why we weren't already
> using mcgen(), though).
yes, it works fine too, and we can simplify a bit the code around.
--
Marc-André Lureau
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 01/12] qapi-schema: use generated marshaller for 'qmp_capabilities'
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 01/12] qapi-schema: use generated marshaller for 'qmp_capabilities' marcandre.lureau
@ 2016-08-05 10:52 ` Markus Armbruster
0 siblings, 0 replies; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 10:52 UTC (permalink / raw)
To: marcandre.lureau; +Cc: qemu-devel
marcandre.lureau@redhat.com writes:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> qapi'fy the 'qmp_capabilities' command.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> Reviewed-by: Eric Blake <eblake@redhat.com>
> ---
> monitor.c | 4 ++--
> qapi-schema.json | 21 +++++++++++++++++++++
> qmp-commands.hx | 2 +-
> 3 files changed, 24 insertions(+), 3 deletions(-)
>
> diff --git a/monitor.c b/monitor.c
> index 5d68a5d..cb1a0c7 100644
> --- a/monitor.c
> +++ b/monitor.c
> @@ -617,7 +617,7 @@ static void monitor_qapi_event_init(void)
> qmp_event_set_func_emit(monitor_qapi_event_queue);
> }
>
> -static void qmp_capabilities(QDict *params, QObject **ret_data, Error **errp)
> +void qmp_qmp_capabilities(Error **errp)
> {
> cur_mon->qmp.in_command_mode = true;
> }
> @@ -3649,7 +3649,7 @@ static int monitor_can_read(void *opaque)
> static bool invalid_qmp_mode(const Monitor *mon, const mon_cmd_t *cmd,
> Error **errp)
> {
> - bool is_cap = cmd->mhandler.cmd_new == qmp_capabilities;
> + bool is_cap = cmd->mhandler.cmd_new == qmp_marshal_qmp_capabilities;
>
> if (is_cap && mon->qmp.in_command_mode) {
> error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,
> diff --git a/qapi-schema.json b/qapi-schema.json
> index 5658723..03c15d8 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -20,6 +20,27 @@
> # QAPI introspection
> { 'include': 'qapi/introspect.json' }
>
> +##
> +# @qmp_capabilities:
> +#
> +# Enable QMP capabilities.
> +#
> +# Arguments: None.
> +#
> +# Example:
> +#
> +# -> { "execute": "qmp_capabilities" }
> +# <- { "return": {} }
> +#
> +# Notes: This command is valid exactly when first connecting: it must be
> +# issued before any other command will be accepted, and will fail once the
> +# monitor is accepting other commands.
Pointer to docs/qmp-spec.txt wouldn't hurt.
> +#
> +# Since: 0.13
> +#
> +##
> +{ 'command': 'qmp_capabilities' }
> +
> ##
> # @LostTickPolicy:
> #
> diff --git a/qmp-commands.hx b/qmp-commands.hx
> index c8d360a..13707ac 100644
> --- a/qmp-commands.hx
> +++ b/qmp-commands.hx
> @@ -2209,7 +2209,7 @@ EQMP
> .args_type = "",
> .params = "",
> .help = "enable QMP capabilities",
> - .mhandler.cmd_new = qmp_capabilities,
> + .mhandler.cmd_new = qmp_marshal_qmp_capabilities,
> },
>
> SQMP
According to docs/qmp-spec.txt section 4, the command is for negotiating
capabilities:
Clients should use the qmp_capabilities command to enable
capabilities advertised in the Server's greeting (section '2.2
Server Greeting') they support.
It neglects to specify how that might be done, though.
Section 2.2 specifies the greeting's member "capabilities" as
json-array, without saying anything about its members.
Section 2.2.1 seems to imply the members are strings, which makes some
sense.
To actually support capabilities negotiation, the command needs an
argument matching the greeting's capabilities array. The argument must
be optional, defaulting to the empty array. No need to add that now.
Clarifying the docs would be nice, but it's not this patch's job.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 02/12] qapi-schema: add 'device_add'
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 02/12] qapi-schema: add 'device_add' marcandre.lureau
2016-07-21 20:44 ` Eric Blake
@ 2016-08-05 12:10 ` Markus Armbruster
1 sibling, 0 replies; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 12:10 UTC (permalink / raw)
To: marcandre.lureau; +Cc: qemu-devel
marcandre.lureau@redhat.com writes:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Even though device_add is not fully qapi'fied, we may add it to the json
> schema with 'gen': false, so registration and documentation can be
> generated.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> qapi-schema.json | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/qapi-schema.json b/qapi-schema.json
> index 03c15d8..e950264 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -2200,6 +2200,35 @@
> ##
> { 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } }
>
> +##
> +# @device_add:
> +#
> +# @driver: the name of the new device's driver
> +# @bus: #optional the device's parent bus (device tree path)
> +# @id: the device's ID, must be unique
> +# @props: #optional a dictionary of properties to be passed to the backend
I'm afraid @props is wrong. The properties are passed inline, like
this:
{ "execute": "device_add",
"arguments": { "driver": "e1000", "id": "nic1", "netdev": "netdev1" } }
*not* in a separate @props object. See also commit b8a9832
"qapi-schema: Fix up misleading specification of netdev_add".
> +#
> +# Add a device.
> +#
> +# Notes:
> +# 1. For detailed information about this command, please refer to the
> +# 'docs/qdev-device-use.txt' file.
> +#
> +# 2. It's possible to list device properties by running QEMU with the
> +# "-device DEVICE,help" command-line argument, where DEVICE is the
> +# device's name
> +#
> +# Example:
> +#
> +# -> { "execute": "device_add",
> +# "arguments": { "driver": "e1000", "id": "net1" } }
Please include at least one property in the example.
> +# <- { "return": {} }
> +#
> +# Since: 0.13
> +##
> +{ 'command': 'device_add',
> + 'data': {'driver': 'str', 'id': 'str'}, 'gen': false }
> +
> ##
> # @device_del:
> #
I like the general idea to do the non-qapi device_add like the simplarly
non-qapi netdev_add.
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 04/12] monitor: remove usage of generated marshal functions
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 04/12] monitor: remove usage of generated marshal functions marcandre.lureau
@ 2016-08-05 12:17 ` Markus Armbruster
2016-08-05 12:22 ` Marc-André Lureau
0 siblings, 1 reply; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 12:17 UTC (permalink / raw)
To: marcandre.lureau; +Cc: qemu-devel
marcandre.lureau@redhat.com writes:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Once the middle mode is removed, the generated marshal functions will no
> longer be exported.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> Reviewed-by: Eric Blake <eblake@redhat.com>
> ---
> monitor.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/monitor.c b/monitor.c
> index c9191e5..3a28b43 100644
> --- a/monitor.c
> +++ b/monitor.c
> @@ -3659,21 +3659,21 @@ static int monitor_can_read(void *opaque)
> return (mon->suspend_cnt == 0) ? 1 : 0;
> }
>
> -static bool invalid_qmp_mode(const Monitor *mon, const mon_cmd_t *cmd,
> +static bool invalid_qmp_mode(const Monitor *mon, const char *cmd,
> Error **errp)
> {
> - bool is_cap = cmd->mhandler.cmd_new == qmp_marshal_qmp_capabilities;
> + bool is_cap = !g_strcmp0(cmd, "qmp_capabilities");
What's wrong with strcmp()?
>
> if (is_cap && mon->qmp.in_command_mode) {
> error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,
> "Capabilities negotiation is already complete, command "
> - "'%s' ignored", cmd->name);
> + "'%s' ignored", cmd);
> return true;
> }
> if (!is_cap && !mon->qmp.in_command_mode) {
> error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,
> "Expecting capabilities negotiation with "
> - "'qmp_capabilities' before command '%s'", cmd->name);
> + "'qmp_capabilities' before command '%s'", cmd);
> return true;
> }
> return false;
> @@ -3964,7 +3964,7 @@ static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
> "The command %s has not been found", cmd_name);
> goto err_out;
> }
> - if (invalid_qmp_mode(mon, cmd, &local_err)) {
> + if (invalid_qmp_mode(mon, cmd_name, &local_err)) {
> goto err_out;
> }
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 04/12] monitor: remove usage of generated marshal functions
2016-08-05 12:17 ` Markus Armbruster
@ 2016-08-05 12:22 ` Marc-André Lureau
2016-08-05 13:43 ` Markus Armbruster
0 siblings, 1 reply; 44+ messages in thread
From: Marc-André Lureau @ 2016-08-05 12:22 UTC (permalink / raw)
To: Markus Armbruster; +Cc: marcandre lureau, qemu-devel
Hi
----- Original Message -----
> marcandre.lureau@redhat.com writes:
>
> > From: Marc-André Lureau <marcandre.lureau@redhat.com>
> >
> > Once the middle mode is removed, the generated marshal functions will no
> > longer be exported.
> >
> > Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> > Reviewed-by: Eric Blake <eblake@redhat.com>
> > ---
> > monitor.c | 10 +++++-----
> > 1 file changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/monitor.c b/monitor.c
> > index c9191e5..3a28b43 100644
> > --- a/monitor.c
> > +++ b/monitor.c
> > @@ -3659,21 +3659,21 @@ static int monitor_can_read(void *opaque)
> > return (mon->suspend_cnt == 0) ? 1 : 0;
> > }
> >
> > -static bool invalid_qmp_mode(const Monitor *mon, const mon_cmd_t *cmd,
> > +static bool invalid_qmp_mode(const Monitor *mon, const char *cmd,
> > Error **errp)
> > {
> > - bool is_cap = cmd->mhandler.cmd_new == qmp_marshal_qmp_capabilities;
> > + bool is_cap = !g_strcmp0(cmd, "qmp_capabilities");
>
> What's wrong with strcmp()?
>
g_strcmp0() is a slightly safer version, it's just an habit, I guess it doesn't matter here, would you like to change it?
> >
> > if (is_cap && mon->qmp.in_command_mode) {
> > error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,
> > "Capabilities negotiation is already complete, command "
> > - "'%s' ignored", cmd->name);
> > + "'%s' ignored", cmd);
> > return true;
> > }
> > if (!is_cap && !mon->qmp.in_command_mode) {
> > error_set(errp, ERROR_CLASS_COMMAND_NOT_FOUND,
> > "Expecting capabilities negotiation with "
> > - "'qmp_capabilities' before command '%s'", cmd->name);
> > + "'qmp_capabilities' before command '%s'", cmd);
> > return true;
> > }
> > return false;
> > @@ -3964,7 +3964,7 @@ static void handle_qmp_command(JSONMessageParser
> > *parser, GQueue *tokens)
> > "The command %s has not been found", cmd_name);
> > goto err_out;
> > }
> > - if (invalid_qmp_mode(mon, cmd, &local_err)) {
> > + if (invalid_qmp_mode(mon, cmd_name, &local_err)) {
> > goto err_out;
> > }
>
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 05/12] monitor: register the qapi generated commands
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 05/12] monitor: register the qapi generated commands marcandre.lureau
2016-07-21 20:56 ` Eric Blake
@ 2016-08-05 12:42 ` Markus Armbruster
2016-08-08 10:10 ` Paolo Bonzini
1 sibling, 1 reply; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 12:42 UTC (permalink / raw)
To: marcandre.lureau; +Cc: qemu-devel, Paolo Bonzini
marcandre.lureau@redhat.com writes:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Stop using the so-called 'middle' mode. Instead, use qmp_find_command()
> from generated qapi commands registry.
>
> Note: this commit requires a 'make clean' prior to make, since the
> generated files do not depend on Makefile (due to a cyclic rule
> introduced in 4115852bb0).
We generally say "commit 4115852bb0".
Sounds like we had a cyclic dependency. Do you mean "they don't depend
on Makefile, because that would be a cyclic dependency"?
Paolo, any smart ideas on how to avoid "requires a 'make clean'"?
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> monitor.c | 15 ++++--
> Makefile | 2 +-
> qmp-commands.hx | 143 --------------------------------------------------------
> vl.c | 1 +
> 4 files changed, 13 insertions(+), 148 deletions(-)
>
> diff --git a/monitor.c b/monitor.c
> index 3a28b43..5bbe4bb 100644
> --- a/monitor.c
> +++ b/monitor.c
> @@ -3934,6 +3934,7 @@ static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
> QObject *obj, *data;
> QDict *input, *args;
> const mon_cmd_t *cmd;
> + QmpCommand *qcmd;
> const char *cmd_name;
> Monitor *mon = cur_mon;
>
> @@ -3959,7 +3960,8 @@ static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
> cmd_name = qdict_get_str(input, "execute");
> trace_handle_qmp_command(mon, cmd_name);
> cmd = qmp_find_cmd(cmd_name);
> - if (!cmd) {
> + qcmd = qmp_find_command(cmd_name);
> + if (!qcmd || !cmd) {
Looks awkward, but it's temporary. Makes sense.
> error_set(&local_err, ERROR_CLASS_COMMAND_NOT_FOUND,
> "The command %s has not been found", cmd_name);
> goto err_out;
> @@ -3981,7 +3983,7 @@ static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
> goto err_out;
> }
>
> - cmd->mhandler.cmd_new(args, &data, &local_err);
> + qcmd->fn(args, &data, &local_err);
>
> err_out:
> monitor_protocol_emitter(mon, data, local_err);
> @@ -4050,10 +4052,15 @@ void monitor_resume(Monitor *mon)
>
> static QObject *get_qmp_greeting(void)
> {
> + QmpCommand *cmd;
> QObject *ver = NULL;
>
> - qmp_marshal_query_version(NULL, &ver, NULL);
> - return qobject_from_jsonf("{'QMP':{'version': %p,'capabilities': []}}",ver);
> + cmd = qmp_find_command("query-version");
> + assert(cmd && cmd->fn);
> + cmd->fn(NULL, &ver, NULL);
> +
> + return qobject_from_jsonf("{'QMP':{'version': %p, 'capabilities': []}}",
> + ver);
Meh.
The generator makes the generated qmp_marshal_FOOs() static unless
middle mode. Middle mode is going away (good riddance). But replacing
the linker's work by qmp_find_command() just so we can keep the
qmp_marshal_FOOs() static isn't an improvement. Especially since it
adds another run-time failure mode. Let's change the generator instead.
> }
>
> static void monitor_qmp_event(void *opaque, int event)
> diff --git a/Makefile b/Makefile
> index 0d7647f..fcdc192 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -311,7 +311,7 @@ $(qapi-modules) $(SRC_PATH)/scripts/qapi-event.py $(qapi-py)
> qmp-commands.h qmp-marshal.c :\
> $(qapi-modules) $(SRC_PATH)/scripts/qapi-commands.py $(qapi-py)
> $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py \
> - $(gen-out-type) -o "." -m $<, \
> + $(gen-out-type) -o "." $<, \
> " GEN $@")
> qmp-introspect.h qmp-introspect.c :\
> $(qapi-modules) $(SRC_PATH)/scripts/qapi-introspect.py $(qapi-py)
> diff --git a/qmp-commands.hx b/qmp-commands.hx
> index 13707ac..1ad8dda 100644
> --- a/qmp-commands.hx
> +++ b/qmp-commands.hx
> @@ -63,7 +63,6 @@ EQMP
> {
> .name = "quit",
> .args_type = "",
> - .mhandler.cmd_new = qmp_marshal_quit,
> },
>
> SQMP
[More of the same snipped...]
> diff --git a/vl.c b/vl.c
> index a455947..a819e05 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -2971,6 +2971,7 @@ int main(int argc, char **argv, char **envp)
> qemu_init_exec_dir(argv[0]);
>
> module_call_init(MODULE_INIT_QOM);
> + module_call_init(MODULE_INIT_QAPI);
>
> qemu_add_opts(&qemu_drive_opts);
> qemu_add_drive_opts(&qemu_legacy_drive_opts);
So the code added by PATCH 03 doesn't actually run without this, right?
Okay with me, but let's mention it in the commit message of PATCH 03.
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 06/12] monitor: remove mhandler.cmd_new
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 06/12] monitor: remove mhandler.cmd_new marcandre.lureau
2016-07-21 21:02 ` Eric Blake
@ 2016-08-05 12:52 ` Markus Armbruster
2016-08-05 13:00 ` Marc-André Lureau
1 sibling, 1 reply; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 12:52 UTC (permalink / raw)
To: marcandre.lureau; +Cc: qemu-devel
marcandre.lureau@redhat.com writes:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> This is no longer necessary, now that middle mode has been removed.
Well, middle mode hasn't been removed just yet, only its use. Perhaps:
This is no longer necessary now that we aren't using middle mode
anymore.
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> monitor.c | 13 +--
> docs/writing-qmp-commands.txt | 8 +-
> hmp-commands-info.hx | 118 ++++++++++++------------
> hmp-commands.hx | 208 +++++++++++++++++++++---------------------
> 4 files changed, 170 insertions(+), 177 deletions(-)
>
> diff --git a/monitor.c b/monitor.c
> index 5bbe4bb..642be2e 100644
> --- a/monitor.c
> +++ b/monitor.c
> @@ -130,13 +130,10 @@ typedef struct mon_cmd_t {
> const char *args_type;
> const char *params;
> const char *help;
> - union {
> - void (*cmd)(Monitor *mon, const QDict *qdict);
> - void (*cmd_new)(QDict *params, QObject **ret_data, Error **errp);
> - } mhandler;
> - /* @sub_table is a list of 2nd level of commands. If it do not exist,
> - * mhandler should be used. If it exist, sub_table[?].mhandler should be
> - * used, and mhandler of 1st level plays the role of help function.
> + void (*cmd)(Monitor *mon, const QDict *qdict);
> + /* @sub_table is a list of 2nd level of commands. If it does not exist,
> + * cmd should be used. If it exists, sub_table[?].cmd should be
> + * used, and cmd of 1st level plays the role of help function.
> */
> struct mon_cmd_t *sub_table;
> void (*command_completion)(ReadLineState *rs, int nb_args, const char *str);
> @@ -2960,7 +2957,7 @@ static void handle_hmp_command(Monitor *mon, const char *cmdline)
> return;
> }
>
> - cmd->mhandler.cmd(mon, qdict);
> + cmd->cmd(mon, qdict);
> QDECREF(qdict);
> }
>
> diff --git a/docs/writing-qmp-commands.txt b/docs/writing-qmp-commands.txt
> index 59aa77a..6208715 100644
> --- a/docs/writing-qmp-commands.txt
> +++ b/docs/writing-qmp-commands.txt
> @@ -127,7 +127,6 @@ following at the bottom:
> {
> .name = "hello-world",
> .args_type = "",
> - .mhandler.cmd_new = qmp_marshal_hello_world,
> },
>
Uh, doesn't this belong to the previous commit?
> You're done. Now build qemu, run it as suggested in the "Testing" section,
> @@ -179,7 +178,6 @@ The last step is to update the qmp-commands.hx file:
> {
> .name = "hello-world",
> .args_type = "message:s?",
> - .mhandler.cmd_new = qmp_marshal_hello_world,
> },
>
Likewise.
> Notice that the "args_type" member got our "message" argument. The character
> @@ -337,7 +335,7 @@ we should add it to the hmp-commands.hx file:
> .args_type = "message:s?",
> .params = "hello-world [message]",
> .help = "Print message to the standard output",
> - .mhandler.cmd = hmp_hello_world,
> + .cmd = hmp_hello_world,
> },
>
> STEXI
> @@ -459,7 +457,6 @@ The last step is to add the correspoding entry in the qmp-commands.hx file:
> {
> .name = "query-alarm-clock",
> .args_type = "",
> - .mhandler.cmd_new = qmp_marshal_query_alarm_clock,
> },
Likewise.
>
> Time to test the new command. Build qemu, run it as described in the "Testing"
> @@ -518,7 +515,7 @@ in the monitor.c file. The entry for the "info alarmclock" follows:
> .args_type = "",
> .params = "",
> .help = "show information about the alarm clock",
> - .mhandler.info = hmp_info_alarm_clock,
> + .cmd = hmp_info_alarm_clock,
> },
>
> To test this, run qemu and type "info alarmclock" in the user monitor.
> @@ -605,7 +602,6 @@ To test this you have to add the corresponding qmp-commands.hx entry:
> {
> .name = "query-alarm-methods",
> .args_type = "",
> - .mhandler.cmd_new = qmp_marshal_query_alarm_methods,
> },
>
Likewise.
> Now Build qemu, run it as explained in the "Testing" section and try our new
> diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
> index 74446c6..19729e5 100644
> --- a/hmp-commands-info.hx
> +++ b/hmp-commands-info.hx
> @@ -18,7 +18,7 @@ ETEXI
> .args_type = "",
> .params = "",
> .help = "show the version of QEMU",
> - .mhandler.cmd = hmp_info_version,
> + .cmd = hmp_info_version,
> },
>
> STEXI
[More of the same snipped...]
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 06/12] monitor: remove mhandler.cmd_new
2016-08-05 12:52 ` Markus Armbruster
@ 2016-08-05 13:00 ` Marc-André Lureau
2016-08-05 13:44 ` Markus Armbruster
0 siblings, 1 reply; 44+ messages in thread
From: Marc-André Lureau @ 2016-08-05 13:00 UTC (permalink / raw)
To: Markus Armbruster; +Cc: marcandre lureau, qemu-devel
Hi
----- Original Message -----
> marcandre.lureau@redhat.com writes:
>
> > From: Marc-André Lureau <marcandre.lureau@redhat.com>
> >
> > This is no longer necessary, now that middle mode has been removed.
>
> Well, middle mode hasn't been removed just yet, only its use. Perhaps:
>
> This is no longer necessary now that we aren't using middle mode
> anymore.
ok
>
> > Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> > ---
> > monitor.c | 13 +--
> > docs/writing-qmp-commands.txt | 8 +-
> > hmp-commands-info.hx | 118 ++++++++++++------------
> > hmp-commands.hx | 208
> > +++++++++++++++++++++---------------------
> > 4 files changed, 170 insertions(+), 177 deletions(-)
> >
> > diff --git a/monitor.c b/monitor.c
> > index 5bbe4bb..642be2e 100644
> > --- a/monitor.c
> > +++ b/monitor.c
> > @@ -130,13 +130,10 @@ typedef struct mon_cmd_t {
> > const char *args_type;
> > const char *params;
> > const char *help;
> > - union {
> > - void (*cmd)(Monitor *mon, const QDict *qdict);
> > - void (*cmd_new)(QDict *params, QObject **ret_data, Error **errp);
> > - } mhandler;
> > - /* @sub_table is a list of 2nd level of commands. If it do not exist,
> > - * mhandler should be used. If it exist, sub_table[?].mhandler should
> > be
> > - * used, and mhandler of 1st level plays the role of help function.
> > + void (*cmd)(Monitor *mon, const QDict *qdict);
> > + /* @sub_table is a list of 2nd level of commands. If it does not
> > exist,
> > + * cmd should be used. If it exists, sub_table[?].cmd should be
> > + * used, and cmd of 1st level plays the role of help function.
> > */
> > struct mon_cmd_t *sub_table;
> > void (*command_completion)(ReadLineState *rs, int nb_args, const char
> > *str);
> > @@ -2960,7 +2957,7 @@ static void handle_hmp_command(Monitor *mon, const
> > char *cmdline)
> > return;
> > }
> >
> > - cmd->mhandler.cmd(mon, qdict);
> > + cmd->cmd(mon, qdict);
> > QDECREF(qdict);
> > }
> >
> > diff --git a/docs/writing-qmp-commands.txt b/docs/writing-qmp-commands.txt
> > index 59aa77a..6208715 100644
> > --- a/docs/writing-qmp-commands.txt
> > +++ b/docs/writing-qmp-commands.txt
> > @@ -127,7 +127,6 @@ following at the bottom:
> > {
> > .name = "hello-world",
> > .args_type = "",
> > - .mhandler.cmd_new = qmp_marshal_hello_world,
> > },
> >
>
> Uh, doesn't this belong to the previous commit?
>
> > You're done. Now build qemu, run it as suggested in the "Testing" section,
> > @@ -179,7 +178,6 @@ The last step is to update the qmp-commands.hx file:
> > {
> > .name = "hello-world",
> > .args_type = "message:s?",
> > - .mhandler.cmd_new = qmp_marshal_hello_world,
> > },
> >
>
> Likewise.
>
> > Notice that the "args_type" member got our "message" argument. The
> > character
> > @@ -337,7 +335,7 @@ we should add it to the hmp-commands.hx file:
> > .args_type = "message:s?",
> > .params = "hello-world [message]",
> > .help = "Print message to the standard output",
> > - .mhandler.cmd = hmp_hello_world,
> > + .cmd = hmp_hello_world,
> > },
> >
> > STEXI
> > @@ -459,7 +457,6 @@ The last step is to add the correspoding entry in the
> > qmp-commands.hx file:
> > {
> > .name = "query-alarm-clock",
> > .args_type = "",
> > - .mhandler.cmd_new = qmp_marshal_query_alarm_clock,
> > },
>
> Likewise.
>
> >
> > Time to test the new command. Build qemu, run it as described in the
> > "Testing"
> > @@ -518,7 +515,7 @@ in the monitor.c file. The entry for the "info
> > alarmclock" follows:
> > .args_type = "",
> > .params = "",
> > .help = "show information about the alarm clock",
> > - .mhandler.info = hmp_info_alarm_clock,
> > + .cmd = hmp_info_alarm_clock,
> > },
> >
> > To test this, run qemu and type "info alarmclock" in the user monitor.
> > @@ -605,7 +602,6 @@ To test this you have to add the corresponding
> > qmp-commands.hx entry:
> > {
> > .name = "query-alarm-methods",
> > .args_type = "",
> > - .mhandler.cmd_new = qmp_marshal_query_alarm_methods,
> > },
> >
>
> Likewise.
Ok those are from the documentation and can be moved to previous commit.
>
> > Now Build qemu, run it as explained in the "Testing" section and try our
> > new
> > diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
> > index 74446c6..19729e5 100644
> > --- a/hmp-commands-info.hx
> > +++ b/hmp-commands-info.hx
> > @@ -18,7 +18,7 @@ ETEXI
> > .args_type = "",
> > .params = "",
> > .help = "show the version of QEMU",
> > - .mhandler.cmd = hmp_info_version,
> > + .cmd = hmp_info_version,
> > },
> >
> > STEXI
> [More of the same snipped...]
However those belong with this commit (I am not sure if you meant that they should also be moved)
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 07/12] monitor: implement 'qmp_query_commands' without qmp_cmds
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 07/12] monitor: implement 'qmp_query_commands' without qmp_cmds marcandre.lureau
2016-07-21 22:51 ` Eric Blake
@ 2016-08-05 13:25 ` Markus Armbruster
1 sibling, 0 replies; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 13:25 UTC (permalink / raw)
To: marcandre.lureau; +Cc: qemu-devel
marcandre.lureau@redhat.com writes:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> So we can get rid of the static qmp_cmds table.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> monitor.c | 32 ++++++++++++++------------------
> 1 file changed, 14 insertions(+), 18 deletions(-)
>
> diff --git a/monitor.c b/monitor.c
> index 642be2e..bd41b4b 100644
> --- a/monitor.c
> +++ b/monitor.c
> @@ -229,8 +229,6 @@ static int mon_refcount;
> static mon_cmd_t mon_cmds[];
> static mon_cmd_t info_cmds[];
>
> -static const mon_cmd_t qmp_cmds[];
> -
> Monitor *cur_mon;
>
> static QEMUClockType event_clock_type = QEMU_CLOCK_REALTIME;
> @@ -947,21 +945,24 @@ static void hmp_info_help(Monitor *mon, const QDict *qdict)
> help_cmd(mon, "info");
> }
>
> -CommandInfoList *qmp_query_commands(Error **errp)
> +static void query_commands_cb(QmpCommand *cmd, void *opaque)
> {
> - CommandInfoList *info, *cmd_list = NULL;
> - const mon_cmd_t *cmd;
> + CommandInfoList *info, **list = opaque;
>
> - for (cmd = qmp_cmds; cmd->name != NULL; cmd++) {
> - info = g_malloc0(sizeof(*info));
> - info->value = g_malloc0(sizeof(*info->value));
> - info->value->name = g_strdup(cmd->name);
> + info = g_malloc0(sizeof(*info));
> + info->value = g_malloc0(sizeof(*info->value));
> + info->value->name = g_strdup(cmd->name);
> + info->next = *list;
> + *list = info;
> +}
>
> - info->next = cmd_list;
> - cmd_list = info;
> - }
> +CommandInfoList *qmp_query_commands(Error **errp)
> +{
> + CommandInfoList *list = NULL;
>
> - return cmd_list;
> + qmp_for_each_command(query_commands_cb, &list);
> +
> + return list;
> }
>
> EventInfoList *qmp_query_events(Error **errp)
> @@ -2166,11 +2167,6 @@ static mon_cmd_t mon_cmds[] = {
> { NULL, NULL, },
> };
>
> -static const mon_cmd_t qmp_cmds[] = {
> -#include "qmp-commands-old.h"
> - { /* NULL */ },
> -};
> -
> /*******************************************************************/
>
> static const char *pch;
I'm afraid you'll have to rearrange things a bit:
x86_64-softmmu/monitor.o
/work/armbru/qemu/monitor.c: In function ‘qmp_find_cmd’:
/work/armbru/qemu/monitor.c:2522:34: error: ‘qmp_cmds’ undeclared (first use in this function)
return search_dispatch_table(qmp_cmds, cmdname);
^
/work/armbru/qemu/monitor.c:2522:34: note: each undeclared identifier is reported only once for each function it appears in
/work/armbru/qemu/monitor.c:2523:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 09/12] qapi: remove the "middle" mode
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 09/12] qapi: remove the "middle" mode marcandre.lureau
2016-07-21 22:55 ` Eric Blake
@ 2016-08-05 13:31 ` Markus Armbruster
1 sibling, 0 replies; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 13:31 UTC (permalink / raw)
To: marcandre.lureau; +Cc: qemu-devel
marcandre.lureau@redhat.com writes:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Now that the register function is always generated, we can
> remove the so-called "middle" mode from the generator script.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> scripts/qapi-commands.py | 29 +++++------------------------
> 1 file changed, 5 insertions(+), 24 deletions(-)
>
> diff --git a/scripts/qapi-commands.py b/scripts/qapi-commands.py
> index a06a2c4..4754ae0 100644
> --- a/scripts/qapi-commands.py
> +++ b/scripts/qapi-commands.py
> @@ -84,17 +84,8 @@ static void qmp_marshal_output_%(c_name)s(%(c_type)s ret_in, QObject **ret_out,
>
>
> def gen_marshal_proto(name):
> - ret = 'void qmp_marshal_%s(QDict *args, QObject **ret, Error **errp)' % c_name(name)
> - if not middle_mode:
> - ret = 'static ' + ret
> - return ret
> -
> -
> -def gen_marshal_decl(name):
> - return mcgen('''
> -%(proto)s;
> -''',
> - proto=gen_marshal_proto(name))
> + return 'static void qmp_marshal_%s' % c_name(name) + \
> + '(QDict *args, QObject **ret, Error **errp)'
Eric's suggestion to use mcgen() here seconded.
>
>
> def gen_marshal(name, arg_type, boxed, ret_type):
> @@ -209,8 +200,7 @@ class QAPISchemaGenCommandVisitor(QAPISchemaVisitor):
> self._visited_ret_types = set()
>
> def visit_end(self):
> - if not middle_mode:
> - self.defn += gen_registry(self._regy)
> + self.defn += gen_registry(self._regy)
> self._regy = None
> self._visited_ret_types = None
>
> @@ -222,21 +212,12 @@ class QAPISchemaGenCommandVisitor(QAPISchemaVisitor):
> if ret_type and ret_type not in self._visited_ret_types:
> self._visited_ret_types.add(ret_type)
> self.defn += gen_marshal_output(ret_type)
> - if middle_mode:
> - self.decl += gen_marshal_decl(name)
> self.defn += gen_marshal(name, arg_type, boxed, ret_type)
> - if not middle_mode:
> - self._regy += gen_register_command(name, success_response)
> -
> + self._regy += gen_register_command(name, success_response)
>
> -middle_mode = False
>
> (input_file, output_dir, do_c, do_h, prefix, opts) = \
> - parse_command_line("m", ["middle"])
> -
> -for o, a in opts:
> - if o in ("-m", "--middle"):
> - middle_mode = True
> + parse_command_line()
>
> c_comment = '''
> /*
Let's get rid of the line continuation, too:
(input_file, output_dir, do_c, do_h, prefix, opts) = parse_command_line()
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 11/12] qmp: update qmp_query_spice fallback
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 11/12] qmp: update qmp_query_spice fallback marcandre.lureau
@ 2016-08-05 13:40 ` Markus Armbruster
2016-08-05 13:43 ` Marc-André Lureau
0 siblings, 1 reply; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 13:40 UTC (permalink / raw)
To: marcandre.lureau; +Cc: qemu-devel
marcandre.lureau@redhat.com writes:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> There are a few commands that are undef #ifdef conditions in
under #ifdef
> qmp-commands.hx. Move all the qmp_query_spice fallback in the same
> location, return an error and update the comment.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> monitor.c | 14 ++++++++++++++
> qmp.c | 16 ----------------
> 2 files changed, 14 insertions(+), 16 deletions(-)
>
> diff --git a/monitor.c b/monitor.c
> index c87089f..46966d5 100644
> --- a/monitor.c
> +++ b/monitor.c
> @@ -4048,6 +4048,20 @@ QemuOptsList qemu_mon_opts = {
> },
> };
>
> +/*
> + * the QAPI schema is blissfully unaware #ifdef FOO commands, and the
> + * QAPI code generator happily generates a dead qmp_marshal_foo_cmd()
> + * that calls qmp_foo_cmd(). Provide it one, or else linking fails.
> + * FIXME Educate the QAPI schema on #ifdef commands.
> + */
> +#ifndef CONFIG_SPICE
> +SpiceInfo *qmp_query_spice(Error **errp)
> +{
> + error_setg(errp, QERR_FEATURE_DISABLED, "spice");
> + return NULL;
Why do you change from abort() to error_setg()?
> +};
> +#endif
> +
> #ifndef TARGET_I386
> void qmp_rtc_reset_reinjection(Error **errp)
> {
> diff --git a/qmp.c b/qmp.c
> index b6d531e..884d1ab 100644
> --- a/qmp.c
> +++ b/qmp.c
> @@ -161,22 +161,6 @@ VncInfo2List *qmp_query_vnc_servers(Error **errp)
> };
> #endif
>
> -#ifndef CONFIG_SPICE
> -/*
> - * qmp-commands.hx ensures that QMP command query-spice exists only
> - * #ifdef CONFIG_SPICE. Necessary for an accurate query-commands
> - * result. However, the QAPI schema is blissfully unaware of that,
> - * and the QAPI code generator happily generates a dead
> - * qmp_marshal_query_spice() that calls qmp_query_spice(). Provide it
> - * one, or else linking fails. FIXME Educate the QAPI schema on
> - * CONFIG_SPICE.
> - */
> -SpiceInfo *qmp_query_spice(Error **errp)
> -{
> - abort();
> -};
> -#endif
> -
> void qmp_cont(Error **errp)
> {
> Error *local_err = NULL;
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 11/12] qmp: update qmp_query_spice fallback
2016-08-05 13:40 ` Markus Armbruster
@ 2016-08-05 13:43 ` Marc-André Lureau
2016-08-05 14:38 ` Markus Armbruster
0 siblings, 1 reply; 44+ messages in thread
From: Marc-André Lureau @ 2016-08-05 13:43 UTC (permalink / raw)
To: Markus Armbruster; +Cc: marcandre lureau, qemu-devel
----- Original Message -----
> marcandre.lureau@redhat.com writes:
>
> > From: Marc-André Lureau <marcandre.lureau@redhat.com>
> >
> > There are a few commands that are undef #ifdef conditions in
>
> under #ifdef
>
> > qmp-commands.hx. Move all the qmp_query_spice fallback in the same
> > location, return an error and update the comment.
> >
> > Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> > ---
> > monitor.c | 14 ++++++++++++++
> > qmp.c | 16 ----------------
> > 2 files changed, 14 insertions(+), 16 deletions(-)
> >
> > diff --git a/monitor.c b/monitor.c
> > index c87089f..46966d5 100644
> > --- a/monitor.c
> > +++ b/monitor.c
> > @@ -4048,6 +4048,20 @@ QemuOptsList qemu_mon_opts = {
> > },
> > };
> >
> > +/*
> > + * the QAPI schema is blissfully unaware #ifdef FOO commands, and the
> > + * QAPI code generator happily generates a dead qmp_marshal_foo_cmd()
> > + * that calls qmp_foo_cmd(). Provide it one, or else linking fails.
> > + * FIXME Educate the QAPI schema on #ifdef commands.
> > + */
> > +#ifndef CONFIG_SPICE
> > +SpiceInfo *qmp_query_spice(Error **errp)
> > +{
> > + error_setg(errp, QERR_FEATURE_DISABLED, "spice");
> > + return NULL;
>
> Why do you change from abort() to error_setg()?
The rest of the commands do not abort. It sounds to easy to trigger, and it's quite harmless to return an error instead.
> > +};
> > +#endif
> > +
> > #ifndef TARGET_I386
> > void qmp_rtc_reset_reinjection(Error **errp)
> > {
> > diff --git a/qmp.c b/qmp.c
> > index b6d531e..884d1ab 100644
> > --- a/qmp.c
> > +++ b/qmp.c
> > @@ -161,22 +161,6 @@ VncInfo2List *qmp_query_vnc_servers(Error **errp)
> > };
> > #endif
> >
> > -#ifndef CONFIG_SPICE
> > -/*
> > - * qmp-commands.hx ensures that QMP command query-spice exists only
> > - * #ifdef CONFIG_SPICE. Necessary for an accurate query-commands
> > - * result. However, the QAPI schema is blissfully unaware of that,
> > - * and the QAPI code generator happily generates a dead
> > - * qmp_marshal_query_spice() that calls qmp_query_spice(). Provide it
> > - * one, or else linking fails. FIXME Educate the QAPI schema on
> > - * CONFIG_SPICE.
> > - */
> > -SpiceInfo *qmp_query_spice(Error **errp)
> > -{
> > - abort();
> > -};
> > -#endif
> > -
> > void qmp_cont(Error **errp)
> > {
> > Error *local_err = NULL;
>
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 04/12] monitor: remove usage of generated marshal functions
2016-08-05 12:22 ` Marc-André Lureau
@ 2016-08-05 13:43 ` Markus Armbruster
0 siblings, 0 replies; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 13:43 UTC (permalink / raw)
To: Marc-André Lureau; +Cc: marcandre lureau, qemu-devel
Marc-André Lureau <mlureau@redhat.com> writes:
> Hi
>
> ----- Original Message -----
>> marcandre.lureau@redhat.com writes:
>>
>> > From: Marc-André Lureau <marcandre.lureau@redhat.com>
>> >
>> > Once the middle mode is removed, the generated marshal functions will no
>> > longer be exported.
>> >
>> > Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
>> > Reviewed-by: Eric Blake <eblake@redhat.com>
>> > ---
>> > monitor.c | 10 +++++-----
>> > 1 file changed, 5 insertions(+), 5 deletions(-)
>> >
>> > diff --git a/monitor.c b/monitor.c
>> > index c9191e5..3a28b43 100644
>> > --- a/monitor.c
>> > +++ b/monitor.c
>> > @@ -3659,21 +3659,21 @@ static int monitor_can_read(void *opaque)
>> > return (mon->suspend_cnt == 0) ? 1 : 0;
>> > }
>> >
>> > -static bool invalid_qmp_mode(const Monitor *mon, const mon_cmd_t *cmd,
>> > +static bool invalid_qmp_mode(const Monitor *mon, const char *cmd,
>> > Error **errp)
>> > {
>> > - bool is_cap = cmd->mhandler.cmd_new == qmp_marshal_qmp_capabilities;
>> > + bool is_cap = !g_strcmp0(cmd, "qmp_capabilities");
>>
>> What's wrong with strcmp()?
>>
>
> g_strcmp0() is a slightly safer version, it's just an habit, I guess it doesn't matter here, would you like to change it?
Yes.
[...]
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 06/12] monitor: remove mhandler.cmd_new
2016-08-05 13:00 ` Marc-André Lureau
@ 2016-08-05 13:44 ` Markus Armbruster
0 siblings, 0 replies; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 13:44 UTC (permalink / raw)
To: Marc-André Lureau; +Cc: marcandre lureau, qemu-devel
Marc-André Lureau <mlureau@redhat.com> writes:
> Hi
>
> ----- Original Message -----
>> marcandre.lureau@redhat.com writes:
>>
>> > From: Marc-André Lureau <marcandre.lureau@redhat.com>
>> >
>> > This is no longer necessary, now that middle mode has been removed.
>>
>> Well, middle mode hasn't been removed just yet, only its use. Perhaps:
>>
>> This is no longer necessary now that we aren't using middle mode
>> anymore.
>
> ok
>
>>
>> > Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
>> > ---
>> > monitor.c | 13 +--
>> > docs/writing-qmp-commands.txt | 8 +-
>> > hmp-commands-info.hx | 118 ++++++++++++------------
>> > hmp-commands.hx | 208
>> > +++++++++++++++++++++---------------------
>> > 4 files changed, 170 insertions(+), 177 deletions(-)
>> >
>> > diff --git a/monitor.c b/monitor.c
>> > index 5bbe4bb..642be2e 100644
>> > --- a/monitor.c
>> > +++ b/monitor.c
>> > @@ -130,13 +130,10 @@ typedef struct mon_cmd_t {
>> > const char *args_type;
>> > const char *params;
>> > const char *help;
>> > - union {
>> > - void (*cmd)(Monitor *mon, const QDict *qdict);
>> > - void (*cmd_new)(QDict *params, QObject **ret_data, Error **errp);
>> > - } mhandler;
>> > - /* @sub_table is a list of 2nd level of commands. If it do not exist,
>> > - * mhandler should be used. If it exist, sub_table[?].mhandler should
>> > be
>> > - * used, and mhandler of 1st level plays the role of help function.
>> > + void (*cmd)(Monitor *mon, const QDict *qdict);
>> > + /* @sub_table is a list of 2nd level of commands. If it does not
>> > exist,
>> > + * cmd should be used. If it exists, sub_table[?].cmd should be
>> > + * used, and cmd of 1st level plays the role of help function.
>> > */
>> > struct mon_cmd_t *sub_table;
>> > void (*command_completion)(ReadLineState *rs, int nb_args, const char
>> > *str);
>> > @@ -2960,7 +2957,7 @@ static void handle_hmp_command(Monitor *mon, const
>> > char *cmdline)
>> > return;
>> > }
>> >
>> > - cmd->mhandler.cmd(mon, qdict);
>> > + cmd->cmd(mon, qdict);
>> > QDECREF(qdict);
>> > }
>> >
>> > diff --git a/docs/writing-qmp-commands.txt b/docs/writing-qmp-commands.txt
>> > index 59aa77a..6208715 100644
>> > --- a/docs/writing-qmp-commands.txt
>> > +++ b/docs/writing-qmp-commands.txt
>> > @@ -127,7 +127,6 @@ following at the bottom:
>> > {
>> > .name = "hello-world",
>> > .args_type = "",
>> > - .mhandler.cmd_new = qmp_marshal_hello_world,
>> > },
>> >
>>
>> Uh, doesn't this belong to the previous commit?
>>
>> > You're done. Now build qemu, run it as suggested in the "Testing" section,
>> > @@ -179,7 +178,6 @@ The last step is to update the qmp-commands.hx file:
>> > {
>> > .name = "hello-world",
>> > .args_type = "message:s?",
>> > - .mhandler.cmd_new = qmp_marshal_hello_world,
>> > },
>> >
>>
>> Likewise.
>>
>> > Notice that the "args_type" member got our "message" argument. The
>> > character
>> > @@ -337,7 +335,7 @@ we should add it to the hmp-commands.hx file:
>> > .args_type = "message:s?",
>> > .params = "hello-world [message]",
>> > .help = "Print message to the standard output",
>> > - .mhandler.cmd = hmp_hello_world,
>> > + .cmd = hmp_hello_world,
>> > },
>> >
>> > STEXI
>> > @@ -459,7 +457,6 @@ The last step is to add the correspoding entry in the
>> > qmp-commands.hx file:
>> > {
>> > .name = "query-alarm-clock",
>> > .args_type = "",
>> > - .mhandler.cmd_new = qmp_marshal_query_alarm_clock,
>> > },
>>
>> Likewise.
>>
>> >
>> > Time to test the new command. Build qemu, run it as described in the
>> > "Testing"
>> > @@ -518,7 +515,7 @@ in the monitor.c file. The entry for the "info
>> > alarmclock" follows:
>> > .args_type = "",
>> > .params = "",
>> > .help = "show information about the alarm clock",
>> > - .mhandler.info = hmp_info_alarm_clock,
>> > + .cmd = hmp_info_alarm_clock,
>> > },
>> >
>> > To test this, run qemu and type "info alarmclock" in the user monitor.
>> > @@ -605,7 +602,6 @@ To test this you have to add the corresponding
>> > qmp-commands.hx entry:
>> > {
>> > .name = "query-alarm-methods",
>> > .args_type = "",
>> > - .mhandler.cmd_new = qmp_marshal_query_alarm_methods,
>> > },
>> >
>>
>> Likewise.
>
>
> Ok those are from the documentation and can be moved to previous commit.
>
>>
>> > Now Build qemu, run it as explained in the "Testing" section and try our
>> > new
>> > diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
>> > index 74446c6..19729e5 100644
>> > --- a/hmp-commands-info.hx
>> > +++ b/hmp-commands-info.hx
>> > @@ -18,7 +18,7 @@ ETEXI
>> > .args_type = "",
>> > .params = "",
>> > .help = "show the version of QEMU",
>> > - .mhandler.cmd = hmp_info_version,
>> > + .cmd = hmp_info_version,
>> > },
>> >
>> > STEXI
>> [More of the same snipped...]
>
> However those belong with this commit (I am not sure if you meant that they should also be moved)
No, I didn't mean to suggest that. They indeed belong to this commit.
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 11/12] qmp: update qmp_query_spice fallback
2016-08-05 13:43 ` Marc-André Lureau
@ 2016-08-05 14:38 ` Markus Armbruster
0 siblings, 0 replies; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 14:38 UTC (permalink / raw)
To: Marc-André Lureau; +Cc: marcandre lureau, qemu-devel
Marc-André Lureau <mlureau@redhat.com> writes:
> ----- Original Message -----
>> marcandre.lureau@redhat.com writes:
>>
>> > From: Marc-André Lureau <marcandre.lureau@redhat.com>
>> >
>> > There are a few commands that are undef #ifdef conditions in
>>
>> under #ifdef
>>
>> > qmp-commands.hx. Move all the qmp_query_spice fallback in the same
>> > location, return an error and update the comment.
>> >
>> > Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
>> > ---
>> > monitor.c | 14 ++++++++++++++
>> > qmp.c | 16 ----------------
>> > 2 files changed, 14 insertions(+), 16 deletions(-)
>> >
>> > diff --git a/monitor.c b/monitor.c
>> > index c87089f..46966d5 100644
>> > --- a/monitor.c
>> > +++ b/monitor.c
>> > @@ -4048,6 +4048,20 @@ QemuOptsList qemu_mon_opts = {
>> > },
>> > };
>> >
>> > +/*
>> > + * the QAPI schema is blissfully unaware #ifdef FOO commands, and the
>> > + * QAPI code generator happily generates a dead qmp_marshal_foo_cmd()
>> > + * that calls qmp_foo_cmd(). Provide it one, or else linking fails.
>> > + * FIXME Educate the QAPI schema on #ifdef commands.
>> > + */
>> > +#ifndef CONFIG_SPICE
>> > +SpiceInfo *qmp_query_spice(Error **errp)
>> > +{
>> > + error_setg(errp, QERR_FEATURE_DISABLED, "spice");
>> > + return NULL;
>>
>> Why do you change from abort() to error_setg()?
>
> The rest of the commands do not abort. It sounds to easy to trigger, and it's quite harmless to return an error instead.
If you can trigger it, the comment is wrong to claim "dead".
Can you trigger it before your series? If not, which commit makes it
triggerable?
[...]
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 10/12] monitor: use qmp_dispatch()
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 10/12] monitor: use qmp_dispatch() marcandre.lureau
@ 2016-08-05 14:43 ` Markus Armbruster
0 siblings, 0 replies; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 14:43 UTC (permalink / raw)
To: marcandre.lureau; +Cc: qemu-devel
marcandre.lureau@redhat.com writes:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Replace the old manual dispatch and validation code by the generic one
> provided by qapi common code.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> monitor.c | 319 +++++++----------------------------------------------------
> trace-events | 1 -
> 2 files changed, 34 insertions(+), 286 deletions(-)
All right, this is where it gets interesting: you replace a whole bunch
of code by other code we have anyway. Excellent. Only we need to
convince ourselves the replacement is functionally equivalent. Before I
dive into that, what have you done to convince yourself?
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 12/12] Drop qmp-commands.hx
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 12/12] Drop qmp-commands.hx marcandre.lureau
@ 2016-08-05 14:56 ` Markus Armbruster
2016-08-05 18:32 ` Marc-André Lureau
0 siblings, 1 reply; 44+ messages in thread
From: Markus Armbruster @ 2016-08-05 14:56 UTC (permalink / raw)
To: marcandre.lureau; +Cc: qemu-devel
marcandre.lureau@redhat.com writes:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Only the documentation remains useful, so strip it.
What about:
The only remaining function of qmp-commands.hx is to let us generate
qmp-commands.txt from it. Replace qmp-commands.hx by qmp-commands.txt.
Assuming that's what you do. Is it?
> (a later update will
> move the documentation in the respective json files and generate the
> text file)
Suggest "again generate".
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> ---
> .gitignore | 1 -
> MAINTAINERS | 2 +-
> Makefile | 3 -
> docs/qapi-code-gen.txt | 6 +-
> docs/writing-qmp-commands.txt | 38 --
> qmp-commands.hx => qmp-commands.txt | 1113 +----------------------------------
> 6 files changed, 7 insertions(+), 1156 deletions(-)
> rename qmp-commands.hx => qmp-commands.txt (87%)
>
> diff --git a/.gitignore b/.gitignore
> index 88ec249..0ab8263 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -53,7 +53,6 @@
> /qemu-bridge-helper
> /qemu-monitor.texi
> /qemu-monitor-info.texi
> -/qmp-commands.txt
> /vscclient
> /fsdev/virtfs-proxy-helper
> *.[1-9]
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d1439a8..ff52548 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1238,7 +1238,7 @@ M: Markus Armbruster <armbru@redhat.com>
> S: Supported
> F: qmp.c
> F: monitor.c
> -F: qmp-commands.hx
> +F: qmp-commands.txt
> F: docs/*qmp-*
> F: scripts/qmp/
> T: git git://repo.or.cz/qemu/armbru.git qapi-next
> diff --git a/Makefile b/Makefile
> index fcdc192..8ec1c3e 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -554,9 +554,6 @@ qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
> qemu-monitor-info.texi: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
> $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
>
> -qmp-commands.txt: $(SRC_PATH)/qmp-commands.hx $(SRC_PATH)/scripts/hxtool
> - $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -q < $< > $@," GEN $@")
> -
> qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/scripts/hxtool
> $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
>
> diff --git a/docs/qapi-code-gen.txt b/docs/qapi-code-gen.txt
> index de298dc..5d4c2cd 100644
> --- a/docs/qapi-code-gen.txt
> +++ b/docs/qapi-code-gen.txt
> @@ -964,9 +964,9 @@ Example:
>
> Used to generate the marshaling/dispatch functions for the commands
> defined in the schema. The generated code implements
> -qmp_marshal_COMMAND() (mentioned in qmp-commands.hx, and registered
> -automatically), and declares qmp_COMMAND() that the user must
> -implement. The following files are generated:
> +qmp_marshal_COMMAND() (registered automatically), and declares
> +qmp_COMMAND() that the user must implement. The following files are
> +generated:
I see you're thorough :)
>
> $(prefix)qmp-marshal.c: command marshal/dispatch functions for each
> QMP command defined in the schema. Functions
> diff --git a/docs/writing-qmp-commands.txt b/docs/writing-qmp-commands.txt
> index 6208715..cfa6fe7 100644
> --- a/docs/writing-qmp-commands.txt
> +++ b/docs/writing-qmp-commands.txt
> @@ -119,16 +119,6 @@ There are a few things to be noticed:
> 5. Printing to the terminal is discouraged for QMP commands, we do it here
> because it's the easiest way to demonstrate a QMP command
>
> -Now a little hack is needed. As we're still using the old QMP server we need
> -to add the new command to its internal dispatch table. This step won't be
> -required in the near future. Open the qmp-commands.hx file and add the
For a value of "near": almost five years!
> -following at the bottom:
> -
> - {
> - .name = "hello-world",
> - .args_type = "",
> - },
> -
> You're done. Now build qemu, run it as suggested in the "Testing" section,
> and then type the following QMP command:
>
> @@ -173,20 +163,6 @@ There are two important details to be noticed:
> 2. The C implementation signature must follow the schema's argument ordering,
> which is defined by the "data" member
>
> -The last step is to update the qmp-commands.hx file:
> -
> - {
> - .name = "hello-world",
> - .args_type = "message:s?",
> - },
> -
> -Notice that the "args_type" member got our "message" argument. The character
> -"s" stands for "string" and "?" means it's optional. This too must be ordered
> -according to the C implementation and schema file. You can look for more
> -examples in the qmp-commands.hx file if you need to define more arguments.
> -
> -Again, this step won't be required in the future.
> -
> Time to test our new version of the "hello-world" command. Build qemu, run it as
> described in the "Testing" section and then send two commands:
>
> @@ -452,13 +428,6 @@ There are a number of things to be noticed:
> 6. You have to include the "qmp-commands.h" header file in qemu-timer.c,
> otherwise qemu won't build
>
> -The last step is to add the correspoding entry in the qmp-commands.hx file:
> -
> - {
> - .name = "query-alarm-clock",
> - .args_type = "",
> - },
> -
> Time to test the new command. Build qemu, run it as described in the "Testing"
> section and try this:
>
> @@ -597,13 +566,6 @@ iteration of the loop. That's because the alarm timer method in use is the
> first element of the alarm_timers array. Also notice that QAPI lists are handled
> by hand and we return the head of the list.
>
> -To test this you have to add the corresponding qmp-commands.hx entry:
> -
> - {
> - .name = "query-alarm-methods",
> - .args_type = "",
> - },
> -
> Now Build qemu, run it as explained in the "Testing" section and try our new
> command:
>
> diff --git a/qmp-commands.hx b/qmp-commands.txt
> similarity index 87%
> rename from qmp-commands.hx
> rename to qmp-commands.txt
Shouldn't qmp-commands.txt live in docs/?
> index 1ad8dda..f796342 100644
> --- a/qmp-commands.hx
> +++ b/qmp-commands.txt
> @@ -1,8 +1,3 @@
Instead of reviewing this diff, let me review how your patch changes
qmp-commands.txt:
diff -u bld-x86/qmp-commands.txt qmp-commands.txt
--- bld-x86/qmp-commands.txt 2016-08-05 16:51:04.854000570 +0200
+++ qmp-commands.txt 2016-08-05 16:54:23.650093974 +0200
@@ -3381,7 +3381,7 @@
"child": "children.1" } }
<- { "return": {} }
-@query-named-block-nodes
+query-named-block-nodes
------------------------
Return a list of BlockDeviceInfo for all the named block driver nodes
@@ -3507,7 +3507,7 @@
]
}
-@query-memory-devices
+query-memory-devices
--------------------
Return a list of memory devices.
@@ -3525,7 +3525,8 @@
"slot": 0},
"type": "dimm"
} ] }
-@query-acpi-ospm-status
+
+query-acpi-ospm-status
--------------------
Return list of ACPIOSTInfo for devices that support status reporting
@@ -3538,6 +3539,7 @@
{ "slot": "2", "slot-type": "DIMM", "source": 0, "status": 0},
{ "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0}
]}
+
rtc-reset-reinjection
---------------------
@@ -3549,6 +3551,7 @@
-> { "execute": "rtc-reset-reinjection" }
<- { "return": {} }
+
trace-event-get-state
---------------------
@@ -3572,6 +3575,7 @@
-> { "execute": "trace-event-get-state", "arguments": { "name": "qemu_memalign" } }
<- { "return": [ { "name": "qemu_memalign", "state": "disabled" } ] }
+
trace-event-set-state
---------------------
Sensible fixes only. Separate patch?
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 12/12] Drop qmp-commands.hx
2016-08-05 14:56 ` Markus Armbruster
@ 2016-08-05 18:32 ` Marc-André Lureau
2016-08-09 13:08 ` Markus Armbruster
0 siblings, 1 reply; 44+ messages in thread
From: Marc-André Lureau @ 2016-08-05 18:32 UTC (permalink / raw)
To: Markus Armbruster; +Cc: qemu-devel
Hi
On Fri, Aug 5, 2016 at 6:58 PM Markus Armbruster <armbru@redhat.com> wrote:
> marcandre.lureau@redhat.com writes:
>
> > From: Marc-André Lureau <marcandre.lureau@redhat.com>
> >
> > Only the documentation remains useful, so strip it.
>
> What about:
>
> The only remaining function of qmp-commands.hx is to let us generate
> qmp-commands.txt from it. Replace qmp-commands.hx by qmp-commands.txt.
>
> Assuming that's what you do. Is it?
>
> > (a later update will
> > move the documentation in the respective json files and generate the
> > text file)
>
> Suggest "again generate".
>
> > Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> > ---
> > .gitignore | 1 -
> > MAINTAINERS | 2 +-
> > Makefile | 3 -
> > docs/qapi-code-gen.txt | 6 +-
> > docs/writing-qmp-commands.txt | 38 --
> > qmp-commands.hx => qmp-commands.txt | 1113
> +----------------------------------
> > 6 files changed, 7 insertions(+), 1156 deletions(-)
> > rename qmp-commands.hx => qmp-commands.txt (87%)
> >
> > diff --git a/.gitignore b/.gitignore
> > index 88ec249..0ab8263 100644
> > --- a/.gitignore
> > +++ b/.gitignore
> > @@ -53,7 +53,6 @@
> > /qemu-bridge-helper
> > /qemu-monitor.texi
> > /qemu-monitor-info.texi
> > -/qmp-commands.txt
> > /vscclient
> > /fsdev/virtfs-proxy-helper
> > *.[1-9]
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index d1439a8..ff52548 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1238,7 +1238,7 @@ M: Markus Armbruster <armbru@redhat.com>
> > S: Supported
> > F: qmp.c
> > F: monitor.c
> > -F: qmp-commands.hx
> > +F: qmp-commands.txt
> > F: docs/*qmp-*
> > F: scripts/qmp/
> > T: git git://repo.or.cz/qemu/armbru.git qapi-next
> > diff --git a/Makefile b/Makefile
> > index fcdc192..8ec1c3e 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -554,9 +554,6 @@ qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx
> $(SRC_PATH)/scripts/hxtool
> > qemu-monitor-info.texi: $(SRC_PATH)/hmp-commands-info.hx
> $(SRC_PATH)/scripts/hxtool
> > $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"
> GEN $@")
> >
> > -qmp-commands.txt: $(SRC_PATH)/qmp-commands.hx $(SRC_PATH)/scripts/hxtool
> > - $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -q < $< > $@,"
> GEN $@")
> > -
> > qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
> $(SRC_PATH)/scripts/hxtool
> > $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"
> GEN $@")
> >
> > diff --git a/docs/qapi-code-gen.txt b/docs/qapi-code-gen.txt
> > index de298dc..5d4c2cd 100644
> > --- a/docs/qapi-code-gen.txt
> > +++ b/docs/qapi-code-gen.txt
> > @@ -964,9 +964,9 @@ Example:
> >
> > Used to generate the marshaling/dispatch functions for the commands
> > defined in the schema. The generated code implements
> > -qmp_marshal_COMMAND() (mentioned in qmp-commands.hx, and registered
> > -automatically), and declares qmp_COMMAND() that the user must
> > -implement. The following files are generated:
> > +qmp_marshal_COMMAND() (registered automatically), and declares
> > +qmp_COMMAND() that the user must implement. The following files are
> > +generated:
>
> I see you're thorough :)
>
> >
> > $(prefix)qmp-marshal.c: command marshal/dispatch functions for each
> > QMP command defined in the schema. Functions
> > diff --git a/docs/writing-qmp-commands.txt
> b/docs/writing-qmp-commands.txt
> > index 6208715..cfa6fe7 100644
> > --- a/docs/writing-qmp-commands.txt
> > +++ b/docs/writing-qmp-commands.txt
> > @@ -119,16 +119,6 @@ There are a few things to be noticed:
> > 5. Printing to the terminal is discouraged for QMP commands, we do it
> here
> > because it's the easiest way to demonstrate a QMP command
> >
> > -Now a little hack is needed. As we're still using the old QMP server we
> need
> > -to add the new command to its internal dispatch table. This step won't
> be
> > -required in the near future. Open the qmp-commands.hx file and add the
>
> For a value of "near": almost five years!
>
> > -following at the bottom:
> > -
> > - {
> > - .name = "hello-world",
> > - .args_type = "",
> > - },
> > -
> > You're done. Now build qemu, run it as suggested in the "Testing"
> section,
> > and then type the following QMP command:
> >
> > @@ -173,20 +163,6 @@ There are two important details to be noticed:
> > 2. The C implementation signature must follow the schema's argument
> ordering,
> > which is defined by the "data" member
> >
> > -The last step is to update the qmp-commands.hx file:
> > -
> > - {
> > - .name = "hello-world",
> > - .args_type = "message:s?",
> > - },
> > -
> > -Notice that the "args_type" member got our "message" argument. The
> character
> > -"s" stands for "string" and "?" means it's optional. This too must be
> ordered
> > -according to the C implementation and schema file. You can look for more
> > -examples in the qmp-commands.hx file if you need to define more
> arguments.
> > -
> > -Again, this step won't be required in the future.
> > -
> > Time to test our new version of the "hello-world" command. Build qemu,
> run it as
> > described in the "Testing" section and then send two commands:
> >
> > @@ -452,13 +428,6 @@ There are a number of things to be noticed:
> > 6. You have to include the "qmp-commands.h" header file in qemu-timer.c,
> > otherwise qemu won't build
> >
> > -The last step is to add the correspoding entry in the qmp-commands.hx
> file:
> > -
> > - {
> > - .name = "query-alarm-clock",
> > - .args_type = "",
> > - },
> > -
> > Time to test the new command. Build qemu, run it as described in the
> "Testing"
> > section and try this:
> >
> > @@ -597,13 +566,6 @@ iteration of the loop. That's because the alarm
> timer method in use is the
> > first element of the alarm_timers array. Also notice that QAPI lists
> are handled
> > by hand and we return the head of the list.
> >
> > -To test this you have to add the corresponding qmp-commands.hx entry:
> > -
> > - {
> > - .name = "query-alarm-methods",
> > - .args_type = "",
> > - },
> > -
> > Now Build qemu, run it as explained in the "Testing" section and try
> our new
> > command:
> >
> > diff --git a/qmp-commands.hx b/qmp-commands.txt
> > similarity index 87%
> > rename from qmp-commands.hx
> > rename to qmp-commands.txt
>
> Shouldn't qmp-commands.txt live in docs/?
>
>
I don't mind. The following patches will generate the file. It could also
generate it under docs/. But then other documentation should also be
generated there. Let's leave itfor a different time.
> index 1ad8dda..f796342 100644
> > --- a/qmp-commands.hx
> > +++ b/qmp-commands.txt
> > @@ -1,8 +1,3 @@
>
> Instead of reviewing this diff, let me review how your patch changes
> qmp-commands.txt:
>
> diff -u bld-x86/qmp-commands.txt qmp-commands.txt
> --- bld-x86/qmp-commands.txt 2016-08-05 16:51:04.854000570 +0200
> +++ qmp-commands.txt 2016-08-05 16:54:23.650093974 +0200
> @@ -3381,7 +3381,7 @@
> "child": "children.1" } }
> <- { "return": {} }
>
> -@query-named-block-nodes
> +query-named-block-nodes
> ------------------------
>
> Return a list of BlockDeviceInfo for all the named block driver nodes
> @@ -3507,7 +3507,7 @@
> ]
> }
>
> -@query-memory-devices
> +query-memory-devices
> --------------------
>
> Return a list of memory devices.
> @@ -3525,7 +3525,8 @@
> "slot": 0},
> "type": "dimm"
> } ] }
> -@query-acpi-ospm-status
> +
> +query-acpi-ospm-status
> --------------------
>
> Return list of ACPIOSTInfo for devices that support status reporting
> @@ -3538,6 +3539,7 @@
> { "slot": "2", "slot-type": "DIMM", "source": 0,
> "status": 0},
> { "slot": "3", "slot-type": "DIMM", "source": 0,
> "status": 0}
> ]}
> +
> rtc-reset-reinjection
> ---------------------
>
> @@ -3549,6 +3551,7 @@
>
> -> { "execute": "rtc-reset-reinjection" }
> <- { "return": {} }
> +
> trace-event-get-state
> ---------------------
>
> @@ -3572,6 +3575,7 @@
>
> -> { "execute": "trace-event-get-state", "arguments": { "name":
> "qemu_memalign" } }
> <- { "return": [ { "name": "qemu_memalign", "state": "disabled" } ] }
> +
> trace-event-set-state
> ---------------------
>
> Sensible fixes only. Separate patch?
>
ok
--
Marc-André Lureau
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 05/12] monitor: register the qapi generated commands
2016-08-05 12:42 ` Markus Armbruster
@ 2016-08-08 10:10 ` Paolo Bonzini
0 siblings, 0 replies; 44+ messages in thread
From: Paolo Bonzini @ 2016-08-08 10:10 UTC (permalink / raw)
To: Markus Armbruster, marcandre.lureau; +Cc: qemu-devel
On 05/08/2016 14:42, Markus Armbruster wrote:
> marcandre.lureau@redhat.com writes:
>
>> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>>
>> Stop using the so-called 'middle' mode. Instead, use qmp_find_command()
>> from generated qapi commands registry.
>>
>> Note: this commit requires a 'make clean' prior to make, since the
>> generated files do not depend on Makefile (due to a cyclic rule
>> introduced in 4115852bb0).
>
> We generally say "commit 4115852bb0".
>
> Sounds like we had a cyclic dependency. Do you mean "they don't depend
> on Makefile, because that would be a cyclic dependency"?
>
> Paolo, any smart ideas on how to avoid "requires a 'make clean'"?
Nope, sorry. :( But if you squash the generator patch that makes
qmp_marshal_* non-static, it should work.
The idea in that commit comes from autotools. I'm not sure how they
deal with it.
Paolo
>> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
>> ---
>> monitor.c | 15 ++++--
>> Makefile | 2 +-
>> qmp-commands.hx | 143 --------------------------------------------------------
>> vl.c | 1 +
>> 4 files changed, 13 insertions(+), 148 deletions(-)
>>
>> diff --git a/monitor.c b/monitor.c
>> index 3a28b43..5bbe4bb 100644
>> --- a/monitor.c
>> +++ b/monitor.c
>> @@ -3934,6 +3934,7 @@ static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
>> QObject *obj, *data;
>> QDict *input, *args;
>> const mon_cmd_t *cmd;
>> + QmpCommand *qcmd;
>> const char *cmd_name;
>> Monitor *mon = cur_mon;
>>
>> @@ -3959,7 +3960,8 @@ static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
>> cmd_name = qdict_get_str(input, "execute");
>> trace_handle_qmp_command(mon, cmd_name);
>> cmd = qmp_find_cmd(cmd_name);
>> - if (!cmd) {
>> + qcmd = qmp_find_command(cmd_name);
>> + if (!qcmd || !cmd) {
>
> Looks awkward, but it's temporary. Makes sense.
>
>> error_set(&local_err, ERROR_CLASS_COMMAND_NOT_FOUND,
>> "The command %s has not been found", cmd_name);
>> goto err_out;
>> @@ -3981,7 +3983,7 @@ static void handle_qmp_command(JSONMessageParser *parser, GQueue *tokens)
>> goto err_out;
>> }
>>
>> - cmd->mhandler.cmd_new(args, &data, &local_err);
>> + qcmd->fn(args, &data, &local_err);
>>
>> err_out:
>> monitor_protocol_emitter(mon, data, local_err);
>> @@ -4050,10 +4052,15 @@ void monitor_resume(Monitor *mon)
>>
>> static QObject *get_qmp_greeting(void)
>> {
>> + QmpCommand *cmd;
>> QObject *ver = NULL;
>>
>> - qmp_marshal_query_version(NULL, &ver, NULL);
>> - return qobject_from_jsonf("{'QMP':{'version': %p,'capabilities': []}}",ver);
>> + cmd = qmp_find_command("query-version");
>> + assert(cmd && cmd->fn);
>> + cmd->fn(NULL, &ver, NULL);
>> +
>> + return qobject_from_jsonf("{'QMP':{'version': %p, 'capabilities': []}}",
>> + ver);
>
> Meh.
>
> The generator makes the generated qmp_marshal_FOOs() static unless
> middle mode. Middle mode is going away (good riddance). But replacing
> the linker's work by qmp_find_command() just so we can keep the
> qmp_marshal_FOOs() static isn't an improvement. Especially since it
> adds another run-time failure mode. Let's change the generator instead.
>
>> }
>>
>> static void monitor_qmp_event(void *opaque, int event)
>> diff --git a/Makefile b/Makefile
>> index 0d7647f..fcdc192 100644
>> --- a/Makefile
>> +++ b/Makefile
>> @@ -311,7 +311,7 @@ $(qapi-modules) $(SRC_PATH)/scripts/qapi-event.py $(qapi-py)
>> qmp-commands.h qmp-marshal.c :\
>> $(qapi-modules) $(SRC_PATH)/scripts/qapi-commands.py $(qapi-py)
>> $(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py \
>> - $(gen-out-type) -o "." -m $<, \
>> + $(gen-out-type) -o "." $<, \
>> " GEN $@")
>> qmp-introspect.h qmp-introspect.c :\
>> $(qapi-modules) $(SRC_PATH)/scripts/qapi-introspect.py $(qapi-py)
>> diff --git a/qmp-commands.hx b/qmp-commands.hx
>> index 13707ac..1ad8dda 100644
>> --- a/qmp-commands.hx
>> +++ b/qmp-commands.hx
>> @@ -63,7 +63,6 @@ EQMP
>> {
>> .name = "quit",
>> .args_type = "",
>> - .mhandler.cmd_new = qmp_marshal_quit,
>> },
>>
>> SQMP
> [More of the same snipped...]
>> diff --git a/vl.c b/vl.c
>> index a455947..a819e05 100644
>> --- a/vl.c
>> +++ b/vl.c
>> @@ -2971,6 +2971,7 @@ int main(int argc, char **argv, char **envp)
>> qemu_init_exec_dir(argv[0]);
>>
>> module_call_init(MODULE_INIT_QOM);
>> + module_call_init(MODULE_INIT_QAPI);
>>
>> qemu_add_opts(&qemu_drive_opts);
>> qemu_add_drive_opts(&qemu_legacy_drive_opts);
>
> So the code added by PATCH 03 doesn't actually run without this, right?
> Okay with me, but let's mention it in the commit message of PATCH 03.
>
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 12/12] Drop qmp-commands.hx
2016-08-05 18:32 ` Marc-André Lureau
@ 2016-08-09 13:08 ` Markus Armbruster
2016-08-09 14:50 ` Marc-André Lureau
0 siblings, 1 reply; 44+ messages in thread
From: Markus Armbruster @ 2016-08-09 13:08 UTC (permalink / raw)
To: Marc-André Lureau; +Cc: qemu-devel
Marc-André Lureau <marcandre.lureau@gmail.com> writes:
> Hi
>
> On Fri, Aug 5, 2016 at 6:58 PM Markus Armbruster <armbru@redhat.com> wrote:
>
>> marcandre.lureau@redhat.com writes:
>>
[...]
>> > diff --git a/qmp-commands.hx b/qmp-commands.txt
>> > similarity index 87%
>> > rename from qmp-commands.hx
>> > rename to qmp-commands.txt
>>
>> Shouldn't qmp-commands.txt live in docs/?
>>
>>
> I don't mind. The following patches will generate the file. It could also
> generate it under docs/. But then other documentation should also be
> generated there. Let's leave itfor a different time.
What other documentation is generated into the root of the build tree?
[...]
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 12/12] Drop qmp-commands.hx
2016-08-09 13:08 ` Markus Armbruster
@ 2016-08-09 14:50 ` Marc-André Lureau
2016-08-09 16:32 ` Markus Armbruster
0 siblings, 1 reply; 44+ messages in thread
From: Marc-André Lureau @ 2016-08-09 14:50 UTC (permalink / raw)
To: Markus Armbruster; +Cc: qemu-devel
Hi
On Tue, Aug 9, 2016 at 5:08 PM Markus Armbruster <armbru@redhat.com> wrote:
>
> > I don't mind. The following patches will generate the file. It could also
> > generate it under docs/. But then other documentation should also be
> > generated there. Let's leave itfor a different time.
>
> What other documentation is generated into the root of the build tree?
>
>
Look at the Makefile distclean rule, most of the files are generated
documentation.
--
Marc-André Lureau
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [Qemu-devel] [PATCH v2 12/12] Drop qmp-commands.hx
2016-08-09 14:50 ` Marc-André Lureau
@ 2016-08-09 16:32 ` Markus Armbruster
0 siblings, 0 replies; 44+ messages in thread
From: Markus Armbruster @ 2016-08-09 16:32 UTC (permalink / raw)
To: Marc-André Lureau; +Cc: qemu-devel
Marc-André Lureau <marcandre.lureau@gmail.com> writes:
> Hi
>
> On Tue, Aug 9, 2016 at 5:08 PM Markus Armbruster <armbru@redhat.com> wrote:
>
>>
>> > I don't mind. The following patches will generate the file. It could also
>> > generate it under docs/. But then other documentation should also be
>> > generated there. Let's leave itfor a different time.
>>
>> What other documentation is generated into the root of the build tree?
>>
>>
> Look at the Makefile distclean rule, most of the files are generated
> documentation.
Mostly the user manual (qemu-doc.texi & friends), and the (rather
moribund) qemu-tech.texi. I guess they're in the root only due to
inertia.
I'd prefer to move (and later generate) qmp-commands.txt to docs/.
^ permalink raw reply [flat|nested] 44+ messages in thread
end of thread, other threads:[~2016-08-09 16:33 UTC | newest]
Thread overview: 44+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-07-21 14:00 [Qemu-devel] [PATCH v2 00/12] qapi: remove the 'middle' mode marcandre.lureau
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 01/12] qapi-schema: use generated marshaller for 'qmp_capabilities' marcandre.lureau
2016-08-05 10:52 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 02/12] qapi-schema: add 'device_add' marcandre.lureau
2016-07-21 20:44 ` Eric Blake
2016-07-22 7:13 ` Marc-André Lureau
2016-08-05 12:10 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 03/12] monitor: register gen:false commands manually marcandre.lureau
2016-07-21 20:50 ` Eric Blake
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 04/12] monitor: remove usage of generated marshal functions marcandre.lureau
2016-08-05 12:17 ` Markus Armbruster
2016-08-05 12:22 ` Marc-André Lureau
2016-08-05 13:43 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 05/12] monitor: register the qapi generated commands marcandre.lureau
2016-07-21 20:56 ` Eric Blake
2016-08-05 12:42 ` Markus Armbruster
2016-08-08 10:10 ` Paolo Bonzini
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 06/12] monitor: remove mhandler.cmd_new marcandre.lureau
2016-07-21 21:02 ` Eric Blake
2016-07-22 7:20 ` Marc-André Lureau
2016-08-05 12:52 ` Markus Armbruster
2016-08-05 13:00 ` Marc-André Lureau
2016-08-05 13:44 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 07/12] monitor: implement 'qmp_query_commands' without qmp_cmds marcandre.lureau
2016-07-21 22:51 ` Eric Blake
2016-08-05 13:25 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 08/12] build-sys: remove qmp-commands-old.h marcandre.lureau
2016-07-21 22:52 ` Eric Blake
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 09/12] qapi: remove the "middle" mode marcandre.lureau
2016-07-21 22:55 ` Eric Blake
2016-07-22 7:35 ` Marc-André Lureau
2016-08-05 13:31 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 10/12] monitor: use qmp_dispatch() marcandre.lureau
2016-08-05 14:43 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 11/12] qmp: update qmp_query_spice fallback marcandre.lureau
2016-08-05 13:40 ` Markus Armbruster
2016-08-05 13:43 ` Marc-André Lureau
2016-08-05 14:38 ` Markus Armbruster
2016-07-21 14:00 ` [Qemu-devel] [PATCH v2 12/12] Drop qmp-commands.hx marcandre.lureau
2016-08-05 14:56 ` Markus Armbruster
2016-08-05 18:32 ` Marc-André Lureau
2016-08-09 13:08 ` Markus Armbruster
2016-08-09 14:50 ` Marc-André Lureau
2016-08-09 16:32 ` Markus Armbruster
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.