* [PATCH] hwmon: (ltc4151) Make shunt-resistor configurable
@ 2016-07-24 20:26 Daniel Golle
2016-07-25 5:19 ` Guenter Roeck
0 siblings, 1 reply; 13+ messages in thread
From: Daniel Golle @ 2016-07-24 20:26 UTC (permalink / raw)
To: linux-hwmon; +Cc: devicetree, Axel Lin, Guenter Roeck, Per Dalén
Allow to specify the resistance of the attached shunt via DT by
adding the shunt-resistor property. Fall-back to the previous
default (1 mOhm) if unset.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/hwmon/ltc4151.c | 26 ++++++++++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/ltc4151.c b/drivers/hwmon/ltc4151.c
index c86a184..f856e44 100644
--- a/drivers/hwmon/ltc4151.c
+++ b/drivers/hwmon/ltc4151.c
@@ -30,6 +30,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
@@ -52,6 +54,7 @@ struct ltc4151_data {
struct mutex update_lock;
bool valid;
unsigned long last_updated; /* in jiffies */
+ unsigned int shunt; /* in micro ohms */
/* Registers */
u8 regs[6];
@@ -111,9 +114,9 @@ static int ltc4151_get_value(struct ltc4151_data *data, u8 reg)
case LTC4151_SENSE_H:
/*
* 20uV resolution. Convert to current as measured with
- * an 1 mOhm sense resistor, in mA.
+ * a given sense resistor, in mA.
*/
- val = val * 20;
+ val = val * 20 * 1000 / data->shunt;
break;
case LTC4151_VIN_H:
/* 25 mV per increment */
@@ -176,6 +179,7 @@ static int ltc4151_probe(struct i2c_client *client,
struct device *dev = &client->dev;
struct ltc4151_data *data;
struct device *hwmon_dev;
+ u32 shunt;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
@@ -184,6 +188,14 @@ static int ltc4151_probe(struct i2c_client *client,
if (!data)
return -ENOMEM;
+#ifdef CONFIG_OF
+ if (!of_property_read_u32(client->dev.of_node, "shunt-resistor", &shunt)
+ && shunt > 0 )
+ data->shunt = shunt;
+ else
+#endif
+ data->shunt = 1000; /* 1 mOhm if not set */
+
data->client = client;
mutex_init(&data->update_lock);
@@ -199,10 +211,20 @@ static const struct i2c_device_id ltc4151_id[] = {
};
MODULE_DEVICE_TABLE(i2c, ltc4151_id);
+#ifdef CONFIG_OF
+static const struct of_device_id ltc4151_match[] = {
+ { .compatible = "lltc,ltc4151" },
+ {},
+};
+#endif
+
/* This is the driver that will be inserted */
static struct i2c_driver ltc4151_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "ltc4151",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ltc4151_match),
},
.probe = ltc4151_probe,
.id_table = ltc4151_id,
--
2.9.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH] hwmon: (ltc4151) Make shunt-resistor configurable
2016-07-24 20:26 [PATCH] hwmon: (ltc4151) Make shunt-resistor configurable Daniel Golle
@ 2016-07-25 5:19 ` Guenter Roeck
0 siblings, 0 replies; 13+ messages in thread
From: Guenter Roeck @ 2016-07-25 5:19 UTC (permalink / raw)
To: Daniel Golle, linux-hwmon; +Cc: devicetree, Axel Lin, Per Dalén
On 07/24/2016 01:26 PM, Daniel Golle wrote:
> Allow to specify the resistance of the attached shunt via DT by
> adding the shunt-resistor property. Fall-back to the previous
> default (1 mOhm) if unset.
>
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
> drivers/hwmon/ltc4151.c | 26 ++++++++++++++++++++++++--
> 1 file changed, 24 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/ltc4151.c b/drivers/hwmon/ltc4151.c
> index c86a184..f856e44 100644
> --- a/drivers/hwmon/ltc4151.c
> +++ b/drivers/hwmon/ltc4151.c
> @@ -30,6 +30,8 @@
>
> #include <linux/kernel.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
I don't immediately see why this include file would be necessary.
> #include <linux/init.h>
> #include <linux/err.h>
> #include <linux/slab.h>
> @@ -52,6 +54,7 @@ struct ltc4151_data {
> struct mutex update_lock;
> bool valid;
> unsigned long last_updated; /* in jiffies */
> + unsigned int shunt; /* in micro ohms */
>
> /* Registers */
> u8 regs[6];
> @@ -111,9 +114,9 @@ static int ltc4151_get_value(struct ltc4151_data *data, u8 reg)
> case LTC4151_SENSE_H:
> /*
> * 20uV resolution. Convert to current as measured with
> - * an 1 mOhm sense resistor, in mA.
> + * a given sense resistor, in mA.
> */
> - val = val * 20;
> + val = val * 20 * 1000 / data->shunt;
> break;
> case LTC4151_VIN_H:
> /* 25 mV per increment */
> @@ -176,6 +179,7 @@ static int ltc4151_probe(struct i2c_client *client,
> struct device *dev = &client->dev;
> struct ltc4151_data *data;
> struct device *hwmon_dev;
> + u32 shunt;
>
> if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
> return -ENODEV;
> @@ -184,6 +188,14 @@ static int ltc4151_probe(struct i2c_client *client,
> if (!data)
> return -ENOMEM;
>
> +#ifdef CONFIG_OF
#ifdef is unnecessary. Worse, it results in
drivers/hwmon/ltc4151.c: In function ‘ltc4151_probe’:
drivers/hwmon/ltc4151.c:182:6: warning: unused variable ‘shunt’
if CONFIG_OF is not defined.
> + if (!of_property_read_u32(client->dev.of_node, "shunt-resistor", &shunt)
> + && shunt > 0 )
checkpatch error
> + data->shunt = shunt;
shunt == 0 is silently accepted and replaced with 1000. This is quite unusual.
Any reason ? If not, return -EINVAL might be more appropriate for shunt == 0.
> + else
> +#endif
> + data->shunt = 1000; /* 1 mOhm if not set */
> +
> data->client = client;
> mutex_init(&data->update_lock);
>
> @@ -199,10 +211,20 @@ static const struct i2c_device_id ltc4151_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, ltc4151_id);
>
> +#ifdef CONFIG_OF
#ifdef is unnecessary.
> +static const struct of_device_id ltc4151_match[] = {
> + { .compatible = "lltc,ltc4151" },
This as well as the property need to be documented.
> + {},
> +};
> +#endif
> +
> /* This is the driver that will be inserted */
> static struct i2c_driver ltc4151_driver = {
> + .class = I2C_CLASS_HWMON,
This is an unrelated change, and appears to be quite pointless,
since the driver does not have a detect function.
Any reason for adding it ? If so, please explain, and submit
as separate patch.
> .driver = {
> .name = "ltc4151",
> + .owner = THIS_MODULE,
Is this now necessary again ? If so, please explain, and submit
as separate patch.
> + .of_match_table = of_match_ptr(ltc4151_match),
> },
> .probe = ltc4151_probe,
> .id_table = ltc4151_id,
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] hwmon: (ltc4151) Make shunt-resistor configurable
@ 2016-07-25 5:19 ` Guenter Roeck
0 siblings, 0 replies; 13+ messages in thread
From: Guenter Roeck @ 2016-07-25 5:19 UTC (permalink / raw)
To: Daniel Golle, linux-hwmon; +Cc: devicetree, Axel Lin, Per Dalén
On 07/24/2016 01:26 PM, Daniel Golle wrote:
> Allow to specify the resistance of the attached shunt via DT by
> adding the shunt-resistor property. Fall-back to the previous
> default (1 mOhm) if unset.
>
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
> drivers/hwmon/ltc4151.c | 26 ++++++++++++++++++++++++--
> 1 file changed, 24 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/ltc4151.c b/drivers/hwmon/ltc4151.c
> index c86a184..f856e44 100644
> --- a/drivers/hwmon/ltc4151.c
> +++ b/drivers/hwmon/ltc4151.c
> @@ -30,6 +30,8 @@
>
> #include <linux/kernel.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
I don't immediately see why this include file would be necessary.
> #include <linux/init.h>
> #include <linux/err.h>
> #include <linux/slab.h>
> @@ -52,6 +54,7 @@ struct ltc4151_data {
> struct mutex update_lock;
> bool valid;
> unsigned long last_updated; /* in jiffies */
> + unsigned int shunt; /* in micro ohms */
>
> /* Registers */
> u8 regs[6];
> @@ -111,9 +114,9 @@ static int ltc4151_get_value(struct ltc4151_data *data, u8 reg)
> case LTC4151_SENSE_H:
> /*
> * 20uV resolution. Convert to current as measured with
> - * an 1 mOhm sense resistor, in mA.
> + * a given sense resistor, in mA.
> */
> - val = val * 20;
> + val = val * 20 * 1000 / data->shunt;
> break;
> case LTC4151_VIN_H:
> /* 25 mV per increment */
> @@ -176,6 +179,7 @@ static int ltc4151_probe(struct i2c_client *client,
> struct device *dev = &client->dev;
> struct ltc4151_data *data;
> struct device *hwmon_dev;
> + u32 shunt;
>
> if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
> return -ENODEV;
> @@ -184,6 +188,14 @@ static int ltc4151_probe(struct i2c_client *client,
> if (!data)
> return -ENOMEM;
>
> +#ifdef CONFIG_OF
#ifdef is unnecessary. Worse, it results in
drivers/hwmon/ltc4151.c: In function ‘ltc4151_probe’:
drivers/hwmon/ltc4151.c:182:6: warning: unused variable ‘shunt’
if CONFIG_OF is not defined.
> + if (!of_property_read_u32(client->dev.of_node, "shunt-resistor", &shunt)
> + && shunt > 0 )
checkpatch error
> + data->shunt = shunt;
shunt == 0 is silently accepted and replaced with 1000. This is quite unusual.
Any reason ? If not, return -EINVAL might be more appropriate for shunt == 0.
> + else
> +#endif
> + data->shunt = 1000; /* 1 mOhm if not set */
> +
> data->client = client;
> mutex_init(&data->update_lock);
>
> @@ -199,10 +211,20 @@ static const struct i2c_device_id ltc4151_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, ltc4151_id);
>
> +#ifdef CONFIG_OF
#ifdef is unnecessary.
> +static const struct of_device_id ltc4151_match[] = {
> + { .compatible = "lltc,ltc4151" },
This as well as the property need to be documented.
> + {},
> +};
> +#endif
> +
> /* This is the driver that will be inserted */
> static struct i2c_driver ltc4151_driver = {
> + .class = I2C_CLASS_HWMON,
This is an unrelated change, and appears to be quite pointless,
since the driver does not have a detect function.
Any reason for adding it ? If so, please explain, and submit
as separate patch.
> .driver = {
> .name = "ltc4151",
> + .owner = THIS_MODULE,
Is this now necessary again ? If so, please explain, and submit
as separate patch.
> + .of_match_table = of_match_ptr(ltc4151_match),
> },
> .probe = ltc4151_probe,
> .id_table = ltc4151_id,
>
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <5795A144.2020300-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>]
* [PATCH 1/2 v2] hwmon: (ltc4151) Make shunt-resistor configurable
[not found] ` <5795A144.2020300-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
@ 2016-07-25 11:56 ` Daniel Golle
[not found] ` <20160725115558.GA18360-g5gK2j5usbvCyp4qypjU+w@public.gmane.org>
2016-07-25 11:56 ` [PATCH 2/2] hwmon: (ltc4151) Add devicetree binding for ltc4151 Daniel Golle
1 sibling, 1 reply; 13+ messages in thread
From: Daniel Golle @ 2016-07-25 11:56 UTC (permalink / raw)
To: Guenter Roeck, devicetree-u79uwXL29TY76Z2rM5mHXA; +Cc: Axel Lin, Per Dalén
Allow to specify the resistance of the attached shunt via DT by
adding the shunt-resistor property. Fall-back to the previous
default (1 mOhm) if unset.
Signed-off-by: Daniel Golle <daniel-g5gK2j5usbvCyp4qypjU+w@public.gmane.org>
---
v2: removed unneeded things and throw -EINVAL for shunt==0
drivers/hwmon/ltc4151.c | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/ltc4151.c b/drivers/hwmon/ltc4151.c
index c86a184..419c6f7 100644
--- a/drivers/hwmon/ltc4151.c
+++ b/drivers/hwmon/ltc4151.c
@@ -30,6 +30,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
@@ -52,6 +53,7 @@ struct ltc4151_data {
struct mutex update_lock;
bool valid;
unsigned long last_updated; /* in jiffies */
+ unsigned int shunt; /* in micro ohms */
/* Registers */
u8 regs[6];
@@ -111,9 +113,9 @@ static int ltc4151_get_value(struct ltc4151_data *data, u8 reg)
case LTC4151_SENSE_H:
/*
* 20uV resolution. Convert to current as measured with
- * an 1 mOhm sense resistor, in mA.
+ * a given sense resistor, in mA.
*/
- val = val * 20;
+ val = val * 20 * 1000 / data->shunt;
break;
case LTC4151_VIN_H:
/* 25 mV per increment */
@@ -176,6 +178,7 @@ static int ltc4151_probe(struct i2c_client *client,
struct device *dev = &client->dev;
struct ltc4151_data *data;
struct device *hwmon_dev;
+ u32 shunt;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
@@ -184,6 +187,14 @@ static int ltc4151_probe(struct i2c_client *client,
if (!data)
return -ENOMEM;
+ if (of_property_read_u32(client->dev.of_node, "shunt-resistor", &shunt))
+ shunt = 1000; /* 1 mOhm if not set via DT */
+
+ if (shunt == 0)
+ return -EINVAL;
+
+ data->shunt = shunt;
+
data->client = client;
mutex_init(&data->update_lock);
@@ -199,10 +210,16 @@ static const struct i2c_device_id ltc4151_id[] = {
};
MODULE_DEVICE_TABLE(i2c, ltc4151_id);
+static const struct of_device_id ltc4151_match[] = {
+ { .compatible = "lltc,ltc4151" },
+ {},
+};
+
/* This is the driver that will be inserted */
static struct i2c_driver ltc4151_driver = {
.driver = {
.name = "ltc4151",
+ .of_match_table = of_match_ptr(ltc4151_match),
},
.probe = ltc4151_probe,
.id_table = ltc4151_id,
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 2/2] hwmon: (ltc4151) Add devicetree binding for ltc4151
[not found] ` <5795A144.2020300-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2016-07-25 11:56 ` [PATCH 1/2 v2] " Daniel Golle
@ 2016-07-25 11:56 ` Daniel Golle
[not found] ` <20160725115616.GA31557-g5gK2j5usbvCyp4qypjU+w@public.gmane.org>
1 sibling, 1 reply; 13+ messages in thread
From: Daniel Golle @ 2016-07-25 11:56 UTC (permalink / raw)
To: Guenter Roeck, devicetree-u79uwXL29TY76Z2rM5mHXA; +Cc: Axel Lin, Per Dalén
Signed-off-by: Daniel Golle <daniel-g5gK2j5usbvCyp4qypjU+w@public.gmane.org>
---
Documentation/devicetree/bindings/hwmon/ltc4151.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/ltc4151.txt
diff --git a/Documentation/devicetree/bindings/hwmon/ltc4151.txt b/Documentation/devicetree/bindings/hwmon/ltc4151.txt
new file mode 100644
index 0000000..aec69ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ltc4151.txt
@@ -0,0 +1,18 @@
+ltc4151 properties
+
+Required properties:
+- compatible: Must be "lltc,ltc4151"
+- reg: I2C address
+
+Optional properties:
+
+- shunt-resistor
+ Shunt resistor value in micro-Ohm
+
+Example:
+
+ltc4151@6e {
+ compatible = "lltc,ltc4151";
+ reg = <0x6e>;
+ shunt-resistor = <1500>;
+};
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 1/2 v2] hwmon: (ltc4151) Make shunt-resistor configurable
2016-07-25 5:19 ` Guenter Roeck
(?)
(?)
@ 2016-07-25 17:11 ` Daniel Golle
-1 siblings, 0 replies; 13+ messages in thread
From: Daniel Golle @ 2016-07-25 17:11 UTC (permalink / raw)
To: linux-hwmon
Allow to specify the resistance of the attached shunt via DT by
adding the shunt-resistor property. Fall-back to the previous
default (1 mOhm) if unset.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: removed unneeded things and throw -EINVAL for shunt==0
(resent to linux-hwmon which by accident wasn't among the receipients)
drivers/hwmon/ltc4151.c | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/ltc4151.c b/drivers/hwmon/ltc4151.c
index c86a184..419c6f7 100644
--- a/drivers/hwmon/ltc4151.c
+++ b/drivers/hwmon/ltc4151.c
@@ -30,6 +30,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
@@ -52,6 +53,7 @@ struct ltc4151_data {
struct mutex update_lock;
bool valid;
unsigned long last_updated; /* in jiffies */
+ unsigned int shunt; /* in micro ohms */
/* Registers */
u8 regs[6];
@@ -111,9 +113,9 @@ static int ltc4151_get_value(struct ltc4151_data *data, u8 reg)
case LTC4151_SENSE_H:
/*
* 20uV resolution. Convert to current as measured with
- * an 1 mOhm sense resistor, in mA.
+ * a given sense resistor, in mA.
*/
- val = val * 20;
+ val = val * 20 * 1000 / data->shunt;
break;
case LTC4151_VIN_H:
/* 25 mV per increment */
@@ -176,6 +178,7 @@ static int ltc4151_probe(struct i2c_client *client,
struct device *dev = &client->dev;
struct ltc4151_data *data;
struct device *hwmon_dev;
+ u32 shunt;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
@@ -184,6 +187,14 @@ static int ltc4151_probe(struct i2c_client *client,
if (!data)
return -ENOMEM;
+ if (of_property_read_u32(client->dev.of_node, "shunt-resistor", &shunt))
+ shunt = 1000; /* 1 mOhm if not set via DT */
+
+ if (shunt == 0)
+ return -EINVAL;
+
+ data->shunt = shunt;
+
data->client = client;
mutex_init(&data->update_lock);
@@ -199,10 +210,16 @@ static const struct i2c_device_id ltc4151_id[] = {
};
MODULE_DEVICE_TABLE(i2c, ltc4151_id);
+static const struct of_device_id ltc4151_match[] = {
+ { .compatible = "lltc,ltc4151" },
+ {},
+};
+
/* This is the driver that will be inserted */
static struct i2c_driver ltc4151_driver = {
.driver = {
.name = "ltc4151",
+ .of_match_table = of_match_ptr(ltc4151_match),
},
.probe = ltc4151_probe,
.id_table = ltc4151_id,
--
2.9.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 2/2] hwmon: (ltc4151) Add devicetree binding for ltc4151
2016-07-25 5:19 ` Guenter Roeck
` (2 preceding siblings ...)
(?)
@ 2016-07-25 17:12 ` Daniel Golle
-1 siblings, 0 replies; 13+ messages in thread
From: Daniel Golle @ 2016-07-25 17:12 UTC (permalink / raw)
To: linux-hwmon
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
(resent to linux-hwmon which by accident wasn't among the receipients)
Documentation/devicetree/bindings/hwmon/ltc4151.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/ltc4151.txt
diff --git a/Documentation/devicetree/bindings/hwmon/ltc4151.txt b/Documentation/devicetree/bindings/hwmon/ltc4151.txt
new file mode 100644
index 0000000..aec69ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ltc4151.txt
@@ -0,0 +1,18 @@
+ltc4151 properties
+
+Required properties:
+- compatible: Must be "lltc,ltc4151"
+- reg: I2C address
+
+Optional properties:
+
+- shunt-resistor
+ Shunt resistor value in micro-Ohm
+
+Example:
+
+ltc4151@6e {
+ compatible = "lltc,ltc4151";
+ reg = <0x6e>;
+ shunt-resistor = <1500>;
+};
--
2.9.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
end of thread, other threads:[~2016-08-01 10:08 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-07-24 20:26 [PATCH] hwmon: (ltc4151) Make shunt-resistor configurable Daniel Golle
2016-07-25 5:19 ` Guenter Roeck
2016-07-25 5:19 ` Guenter Roeck
[not found] ` <5795A144.2020300-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2016-07-25 11:56 ` [PATCH 1/2 v2] " Daniel Golle
[not found] ` <20160725115558.GA18360-g5gK2j5usbvCyp4qypjU+w@public.gmane.org>
2016-07-30 16:00 ` Guenter Roeck
[not found] ` <579CCF0E.9050506-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2016-07-30 16:11 ` Daniel Golle
[not found] ` <20160730161133.GA17568-g5gK2j5usbvCyp4qypjU+w@public.gmane.org>
2016-07-30 16:26 ` Guenter Roeck
2016-07-25 11:56 ` [PATCH 2/2] hwmon: (ltc4151) Add devicetree binding for ltc4151 Daniel Golle
[not found] ` <20160725115616.GA31557-g5gK2j5usbvCyp4qypjU+w@public.gmane.org>
2016-07-27 14:48 ` Rob Herring
2016-08-01 10:07 ` [PATCH v2 1/2] hwmon: (ltc4151) Make shunt-resistor configurable Daniel Golle
2016-08-01 10:08 ` [PATCH 2/2] hwmon: (ltc4151) Add devicetree binding for ltc4151 Daniel Golle
2016-07-25 17:11 ` [PATCH 1/2 v2] hwmon: (ltc4151) Make shunt-resistor configurable Daniel Golle
2016-07-25 17:12 ` [PATCH 2/2] hwmon: (ltc4151) Add devicetree binding for ltc4151 Daniel Golle
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.