* Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
@ 2016-08-01 9:03 Marcin Mirosław
2016-08-01 9:08 ` Vitaly Wool
2016-08-04 11:58 ` Sergey Senozhatsky
0 siblings, 2 replies; 10+ messages in thread
From: Marcin Mirosław @ 2016-08-01 9:03 UTC (permalink / raw)
To: linux-mm; +Cc: vitaly.wool
Hi!
I'm testing kernel-git
(git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git , at
07f00f06ba9a5533d6650d46d3e938f6cbeee97e ) because I noticed strange OOM
behavior in kernel 4.7.0. As for now I can't reproduce problems with
OOM, probably it's fixed now.
But now I wanted to try z3fold with zswap. When I did `echo z3fold >
/sys/module/zswap/parameters/zpool` I got trace from dmesg:
[ 429.722411] ------------[ cut here ]------------
[ 429.723476] WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503
__zswap_pool_current+0x56/0x60
[ 429.725161] Modules linked in: z3fold tun algif_skcipher af_alg
dm_crypt netconsole xt_policy ipt_REJECT nf_reject_ipv4 xt_TARPIT(OE)
xt_NFLOG ip_set_hash_ip ip_set_hash_net xt_SYSRQ(OE) xt_multiport
nfnetlink_queue sit ip_tunnel tunnel4 xt_set ip_set iptable_filter
xt_nat xt_comment xt_length iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4
nf_nat_ipv4 nf_nat iptable_mangle xt_CT iptable_raw ip_tables
nf_conntrack_ipv6 nf_defrag_ipv6 ip6t_rt xt_conntrack nf_conntrack
ip6table_filter ip6table_mangle ip6_tables ipv6 xfs libcrc32c btrfs xor
zlib_deflate raid6_pq tcp_diag inet_diag aesni_intel aes_x86_64
glue_helper lrw gf128mul ablk_helper cryptd button virtio_net
virtio_balloon crc32c_intel
[ 429.738937] CPU: 0 PID: 5140 Comm: bash Tainted: G OE
4.7.0+ #4
[ 429.739880] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007
[ 429.740048] 0000000000000286 000000002ea2eeca ffff8ecca91efcd8
ffffffffad255d43
[ 429.740048] 0000000000000000 0000000000000000 ffff8ecca91efd18
ffffffffad04c997
[ 429.740048] 000001f700000003 ffffffffad9b8a58 ffff8eccbd162b58
0000000000000000
[ 429.740048] Call Trace:
[ 429.740048] [<ffffffffad255d43>] dump_stack+0x63/0x90
[ 429.740048] [<ffffffffad04c997>] __warn+0xc7/0xf0
[ 429.740048] [<ffffffffad04cac8>] warn_slowpath_null+0x18/0x20
[ 429.740048] [<ffffffffad1250c6>] __zswap_pool_current+0x56/0x60
[ 429.740048] [<ffffffffad1250e3>] zswap_pool_current+0x13/0x20
[ 429.740048] [<ffffffffad125efb>] __zswap_param_set+0x1db/0x2f0
[ 429.740048] [<ffffffffad126042>] zswap_zpool_param_set+0x12/0x20
[ 429.740048] [<ffffffffad06645f>] param_attr_store+0x5f/0xc0
[ 429.740048] [<ffffffffad065b69>] module_attr_store+0x19/0x30
[ 429.740048] [<ffffffffad1b0b02>] sysfs_kf_write+0x32/0x40
[ 429.740048] [<ffffffffad1b0663>] kernfs_fop_write+0x113/0x190
[ 429.740048] [<ffffffffad13fc52>] __vfs_write+0x32/0x150
[ 429.740048] [<ffffffffad15f0ae>] ? __fd_install+0x2e/0xe0
[ 429.740048] [<ffffffffad15ef11>] ? __alloc_fd+0x41/0x180
[ 429.740048] [<ffffffffad0838dd>] ? percpu_down_read+0xd/0x50
[ 429.740048] [<ffffffffad140d33>] vfs_write+0xb3/0x1a0
[ 429.740048] [<ffffffffad13db81>] ? filp_close+0x51/0x70
[ 429.740048] [<ffffffffad142140>] SyS_write+0x50/0xc0
[ 429.740048] [<ffffffffad413836>] entry_SYSCALL_64_fastpath+0x1e/0xa8
[ 429.764069] ---[ end trace ff7835fbf4d983b9 ]---
Second issue:
Since 4.7.0 up to now I've got strange problem with starting BIND (dns).
It can't start, throws:
2016-08-01T10:42:21.449188+02:00 jowisz named[3730]: listening on IPv4
interface eth0, 81.4.122.249#53
2016-08-01T10:42:21.449412+02:00 jowisz named[3730]: could not listen on
UDP socket: out of memory
2016-08-01T10:42:21.449455+02:00 jowisz named[3730]: creating IPv4
interface eth0 failed; interface ignored
2016-08-01T10:42:21.449514+02:00 jowisz named[3730]: not listening on
any interfaces
2016-08-01T10:42:21.449670+02:00 jowisz named[3730]: generating session
key for dynamic DNS
2016-08-01T10:42:21.449910+02:00 jowisz named[3730]: sizing zone task
pool based on 69 zones
2016-08-01T10:42:21.450094+02:00 jowisz named[3730]: dns_master_load:
out of memory
2016-08-01T10:42:21.450668+02:00 jowisz named[3730]: could not configure
root hints from 'named.cache': out of memory
2016-08-01T10:42:21.451236+02:00 jowisz named[3730]: additionally
listening on IPv4 interface eth0, 81.4.122.249#53
2016-08-01T10:42:21.451298+02:00 jowisz named[3730]: could not listen on
UDP socket: out of memory
2016-08-01T10:42:21.451342+02:00 jowisz named[3730]: creating IPv4
interface eth0 failed; interface ignored
2016-08-01T10:42:21.451479+02:00 jowisz named[3730]: loading
configuration: out of memory
2016-08-01T10:42:21.451515+02:00 jowisz named[3730]: exiting (due to
fatal error)
strace shows:
[pid 26247] sendto(3, "<29>Aug 1 11:02:23 named[26230]"..., 80,
MSG_NOSIGNAL, NULL, 0) = 80
[pid 26247] mprotect(0x7f8828051000, 8192, PROT_READ|PROT_WRITE) = -1
ENOMEM (Cannot allocate memory)
[pid 26247] mmap(NULL, 134217728, PROT_NONE,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x7f8820000000
[pid 26247] munmap(0x7f8824000000, 67108864) = 0
[pid 26247] mprotect(0x7f8820000000, 143360, PROT_READ|PROT_WRITE) = -1
ENOMEM (Cannot allocate memory)
[pid 26247] munmap(0x7f8820000000, 67108864) = 0
[pid 26247] mmap(NULL, 12288, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = -1 ENOMEM (Cannot allocate memory)
[pid 26247] mprotect(0x7f8828051000, 8192, PROT_READ|PROT_WRITE) = -1
ENOMEM (Cannot allocate memory)
[pid 26247] mmap(0x7f8824000000, 67108864, PROT_NONE,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x7f8824000000
[pid 26247] mprotect(0x7f8824000000, 143360, PROT_READ|PROT_WRITE) = -1
ENOMEM (Cannot allocate memory)
[pid 26247] munmap(0x7f8824000000, 67108864) = 0
Thanks,
Marcin
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
2016-08-01 9:03 Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60 Marcin Mirosław
@ 2016-08-01 9:08 ` Vitaly Wool
2016-08-01 9:21 ` Marcin Mirosław
2016-08-04 11:58 ` Sergey Senozhatsky
1 sibling, 1 reply; 10+ messages in thread
From: Vitaly Wool @ 2016-08-01 9:08 UTC (permalink / raw)
To: Marcin Mirosław; +Cc: Linux-MM
[-- Attachment #1: Type: text/plain, Size: 5822 bytes --]
Hi Marcin,
Den 1 aug. 2016 11:04 fm skrev "Marcin Mirosław" <marcin@mejor.pl>:
>
> Hi!
> I'm testing kernel-git
> (git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git , at
> 07f00f06ba9a5533d6650d46d3e938f6cbeee97e ) because I noticed strange OOM
> behavior in kernel 4.7.0. As for now I can't reproduce problems with
> OOM, probably it's fixed now.
> But now I wanted to try z3fold with zswap. When I did `echo z3fold >
> /sys/module/zswap/parameters/zpool` I got trace from dmesg:
Could you please give more info on how to reproduce this?
~vitaly
>
> [ 429.722411] ------------[ cut here ]------------
> [ 429.723476] WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503
> __zswap_pool_current+0x56/0x60
> [ 429.725161] Modules linked in: z3fold tun algif_skcipher af_alg
> dm_crypt netconsole xt_policy ipt_REJECT nf_reject_ipv4 xt_TARPIT(OE)
> xt_NFLOG ip_set_hash_ip ip_set_hash_net xt_SYSRQ(OE) xt_multiport
> nfnetlink_queue sit ip_tunnel tunnel4 xt_set ip_set iptable_filter
> xt_nat xt_comment xt_length iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4
> nf_nat_ipv4 nf_nat iptable_mangle xt_CT iptable_raw ip_tables
> nf_conntrack_ipv6 nf_defrag_ipv6 ip6t_rt xt_conntrack nf_conntrack
> ip6table_filter ip6table_mangle ip6_tables ipv6 xfs libcrc32c btrfs xor
> zlib_deflate raid6_pq tcp_diag inet_diag aesni_intel aes_x86_64
> glue_helper lrw gf128mul ablk_helper cryptd button virtio_net
> virtio_balloon crc32c_intel
> [ 429.738937] CPU: 0 PID: 5140 Comm: bash Tainted: G OE
> 4.7.0+ #4
> [ 429.739880] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007
> [ 429.740048] 0000000000000286 000000002ea2eeca ffff8ecca91efcd8
> ffffffffad255d43
> [ 429.740048] 0000000000000000 0000000000000000 ffff8ecca91efd18
> ffffffffad04c997
> [ 429.740048] 000001f700000003 ffffffffad9b8a58 ffff8eccbd162b58
> 0000000000000000
> [ 429.740048] Call Trace:
> [ 429.740048] [<ffffffffad255d43>] dump_stack+0x63/0x90
> [ 429.740048] [<ffffffffad04c997>] __warn+0xc7/0xf0
> [ 429.740048] [<ffffffffad04cac8>] warn_slowpath_null+0x18/0x20
> [ 429.740048] [<ffffffffad1250c6>] __zswap_pool_current+0x56/0x60
> [ 429.740048] [<ffffffffad1250e3>] zswap_pool_current+0x13/0x20
> [ 429.740048] [<ffffffffad125efb>] __zswap_param_set+0x1db/0x2f0
> [ 429.740048] [<ffffffffad126042>] zswap_zpool_param_set+0x12/0x20
> [ 429.740048] [<ffffffffad06645f>] param_attr_store+0x5f/0xc0
> [ 429.740048] [<ffffffffad065b69>] module_attr_store+0x19/0x30
> [ 429.740048] [<ffffffffad1b0b02>] sysfs_kf_write+0x32/0x40
> [ 429.740048] [<ffffffffad1b0663>] kernfs_fop_write+0x113/0x190
> [ 429.740048] [<ffffffffad13fc52>] __vfs_write+0x32/0x150
> [ 429.740048] [<ffffffffad15f0ae>] ? __fd_install+0x2e/0xe0
> [ 429.740048] [<ffffffffad15ef11>] ? __alloc_fd+0x41/0x180
> [ 429.740048] [<ffffffffad0838dd>] ? percpu_down_read+0xd/0x50
> [ 429.740048] [<ffffffffad140d33>] vfs_write+0xb3/0x1a0
> [ 429.740048] [<ffffffffad13db81>] ? filp_close+0x51/0x70
> [ 429.740048] [<ffffffffad142140>] SyS_write+0x50/0xc0
> [ 429.740048] [<ffffffffad413836>] entry_SYSCALL_64_fastpath+0x1e/0xa8
> [ 429.764069] ---[ end trace ff7835fbf4d983b9 ]---
>
>
> Second issue:
> Since 4.7.0 up to now I've got strange problem with starting BIND (dns).
> It can't start, throws:
> 2016-08-01T10:42:21.449188+02:00 jowisz named[3730]: listening on IPv4
> interface eth0, 81.4.122.249#53
> 2016-08-01T10:42:21.449412+02:00 jowisz named[3730]: could not listen on
> UDP socket: out of memory
> 2016-08-01T10:42:21.449455+02:00 jowisz named[3730]: creating IPv4
> interface eth0 failed; interface ignored
> 2016-08-01T10:42:21.449514+02:00 jowisz named[3730]: not listening on
> any interfaces
> 2016-08-01T10:42:21.449670+02:00 jowisz named[3730]: generating session
> key for dynamic DNS
> 2016-08-01T10:42:21.449910+02:00 jowisz named[3730]: sizing zone task
> pool based on 69 zones
> 2016-08-01T10:42:21.450094+02:00 jowisz named[3730]: dns_master_load:
> out of memory
> 2016-08-01T10:42:21.450668+02:00 jowisz named[3730]: could not configure
> root hints from 'named.cache': out of memory
> 2016-08-01T10:42:21.451236+02:00 jowisz named[3730]: additionally
> listening on IPv4 interface eth0, 81.4.122.249#53
> 2016-08-01T10:42:21.451298+02:00 jowisz named[3730]: could not listen on
> UDP socket: out of memory
> 2016-08-01T10:42:21.451342+02:00 jowisz named[3730]: creating IPv4
> interface eth0 failed; interface ignored
> 2016-08-01T10:42:21.451479+02:00 jowisz named[3730]: loading
> configuration: out of memory
> 2016-08-01T10:42:21.451515+02:00 jowisz named[3730]: exiting (due to
> fatal error)
>
> strace shows:
> [pid 26247] sendto(3, "<29>Aug 1 11:02:23 named[26230]"..., 80,
> MSG_NOSIGNAL, NULL, 0) = 80
> [pid 26247] mprotect(0x7f8828051000, 8192, PROT_READ|PROT_WRITE) = -1
> ENOMEM (Cannot allocate memory)
> [pid 26247] mmap(NULL, 134217728, PROT_NONE,
> MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x7f8820000000
> [pid 26247] munmap(0x7f8824000000, 67108864) = 0
> [pid 26247] mprotect(0x7f8820000000, 143360, PROT_READ|PROT_WRITE) = -1
> ENOMEM (Cannot allocate memory)
> [pid 26247] munmap(0x7f8820000000, 67108864) = 0
> [pid 26247] mmap(NULL, 12288, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = -1 ENOMEM (Cannot allocate memory)
> [pid 26247] mprotect(0x7f8828051000, 8192, PROT_READ|PROT_WRITE) = -1
> ENOMEM (Cannot allocate memory)
> [pid 26247] mmap(0x7f8824000000, 67108864, PROT_NONE,
> MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x7f8824000000
> [pid 26247] mprotect(0x7f8824000000, 143360, PROT_READ|PROT_WRITE) = -1
> ENOMEM (Cannot allocate memory)
> [pid 26247] munmap(0x7f8824000000, 67108864) = 0
>
>
> Thanks,
> Marcin
[-- Attachment #2: Type: text/html, Size: 7023 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
2016-08-01 9:08 ` Vitaly Wool
@ 2016-08-01 9:21 ` Marcin Mirosław
2016-08-02 9:13 ` Vitaly Wool
0 siblings, 1 reply; 10+ messages in thread
From: Marcin Mirosław @ 2016-08-01 9:21 UTC (permalink / raw)
To: Vitaly Wool; +Cc: Linux-MM
W dniu 01.08.2016 o 11:08, Vitaly Wool pisze:
> Hi Marcin,
>
> Den 1 aug. 2016 11:04 fm skrev "Marcin MirosA?aw" <marcin@mejor.pl
> <mailto:marcin@mejor.pl>>:
>>
>> Hi!
>> I'm testing kernel-git
>> (git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> <http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git> , at
>> 07f00f06ba9a5533d6650d46d3e938f6cbeee97e ) because I noticed strange OOM
>> behavior in kernel 4.7.0. As for now I can't reproduce problems with
>> OOM, probably it's fixed now.
>> But now I wanted to try z3fold with zswap. When I did `echo z3fold >
>> /sys/module/zswap/parameters/zpool` I got trace from dmesg:
>
> Could you please give more info on how to reproduce this?
Nothing special. Just rebooted server (vm on kvm), started services and
issued `echo z3fold > ...`
Marcin
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
2016-08-01 9:21 ` Marcin Mirosław
@ 2016-08-02 9:13 ` Vitaly Wool
2016-08-02 9:52 ` Marcin Mirosław
0 siblings, 1 reply; 10+ messages in thread
From: Vitaly Wool @ 2016-08-02 9:13 UTC (permalink / raw)
To: Marcin Mirosław; +Cc: Linux-MM
[-- Attachment #1: Type: text/plain, Size: 1011 bytes --]
On Mon, Aug 1, 2016 at 11:21 AM, Marcin Mirosław <marcin@mejor.pl> wrote:
> W dniu 01.08.2016 o 11:08, Vitaly Wool pisze:
> > Hi Marcin,
> >
> > Den 1 aug. 2016 11:04 fm skrev "Marcin Mirosław" <marcin@mejor.pl
> > <mailto:marcin@mejor.pl>>:
> >>
> >> Hi!
> >> I'm testing kernel-git
> >> (git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> > <http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git> , at
> >> 07f00f06ba9a5533d6650d46d3e938f6cbeee97e ) because I noticed strange OOM
> >> behavior in kernel 4.7.0. As for now I can't reproduce problems with
> >> OOM, probably it's fixed now.
> >> But now I wanted to try z3fold with zswap. When I did `echo z3fold >
> >> /sys/module/zswap/parameters/zpool` I got trace from dmesg:
> >
> > Could you please give more info on how to reproduce this?
>
> Nothing special. Just rebooted server (vm on kvm), started services and
> issued `echo z3fold > ...`
>
Well, first of all this is Intel right?
~vitaly
[-- Attachment #2: Type: text/html, Size: 1870 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
2016-08-02 9:13 ` Vitaly Wool
@ 2016-08-02 9:52 ` Marcin Mirosław
0 siblings, 0 replies; 10+ messages in thread
From: Marcin Mirosław @ 2016-08-02 9:52 UTC (permalink / raw)
To: Vitaly Wool; +Cc: Linux-MM
W dniu 02.08.2016 o 11:13, Vitaly Wool pisze:
>
>
> On Mon, Aug 1, 2016 at 11:21 AM, Marcin MirosA?aw <marcin@mejor.pl
> <mailto:marcin@mejor.pl>> wrote:
>
> W dniu 01.08.2016 o 11:08, Vitaly Wool pisze:
> > Hi Marcin,
> >
> > Den 1 aug. 2016 11:04 fm skrev "Marcin MirosA?aw" <marcin@mejor.pl <mailto:marcin@mejor.pl>
> > <mailto:marcin@mejor.pl <mailto:marcin@mejor.pl>>>:
> >>
> >> Hi!
> >> I'm testing kernel-git
> >> (git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> <http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git>
> >
> <http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git> , at
> >> 07f00f06ba9a5533d6650d46d3e938f6cbeee97e ) because I noticed strange OOM
> >> behavior in kernel 4.7.0. As for now I can't reproduce problems with
> >> OOM, probably it's fixed now.
> >> But now I wanted to try z3fold with zswap. When I did `echo z3fold >
> >> /sys/module/zswap/parameters/zpool` I got trace from dmesg:
> >
> > Could you please give more info on how to reproduce this?
>
> Nothing special. Just rebooted server (vm on kvm), started services and
> issued `echo z3fold > ...`
>
>
> Well, first of all this is Intel right?
Yes, this is Intel and I'm sitting inside vm (KVM).
[...]
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 62
model name : Intel(R) Xeon(R) CPU E5-2630 v2 @ 2.60GHz
stepping : 4
microcode : 0x1
cpu MHz : 2599.851
cache size : 4096 KB
physical id : 3
siblings : 1
core id : 0
cpu cores : 1
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ss syscall nx pdpe1gb lm
constant_tsc arch_perfmon nopl eagerfpu pni pclmulqdq ssse3 cx16 pcid
sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand
hypervisor lahf_lm fsgsbase smep xsaveopt
bugs :
bogomips : 5199.99
clflush size : 64
cache_alignment : 64
address sizes : 46 bits physical, 48 bits virtual
power management:
I've got 4 VCPU.
Marcin
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
2016-08-01 9:03 Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60 Marcin Mirosław
2016-08-01 9:08 ` Vitaly Wool
@ 2016-08-04 11:58 ` Sergey Senozhatsky
2016-08-04 18:15 ` Dan Streetman
2016-08-07 22:40 ` Vitaly Wool
1 sibling, 2 replies; 10+ messages in thread
From: Sergey Senozhatsky @ 2016-08-04 11:58 UTC (permalink / raw)
To: Seth Jennings, Dan Streetman
Cc: linux-mm, Vitaly Wool, Marcin Mirosław, Andrew Morton
Hello,
Cc Seth, Dan
On (08/01/16 11:03), Marcin MirosA?aw wrote:
> [ 429.722411] ------------[ cut here ]------------
> [ 429.723476] WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
> [ 429.740048] Call Trace:
> [ 429.740048] [<ffffffffad255d43>] dump_stack+0x63/0x90
> [ 429.740048] [<ffffffffad04c997>] __warn+0xc7/0xf0
> [ 429.740048] [<ffffffffad04cac8>] warn_slowpath_null+0x18/0x20
> [ 429.740048] [<ffffffffad1250c6>] __zswap_pool_current+0x56/0x60
> [ 429.740048] [<ffffffffad1250e3>] zswap_pool_current+0x13/0x20
> [ 429.740048] [<ffffffffad125efb>] __zswap_param_set+0x1db/0x2f0
> [ 429.740048] [<ffffffffad126042>] zswap_zpool_param_set+0x12/0x20
> [ 429.740048] [<ffffffffad06645f>] param_attr_store+0x5f/0xc0
> [ 429.740048] [<ffffffffad065b69>] module_attr_store+0x19/0x30
> [ 429.740048] [<ffffffffad1b0b02>] sysfs_kf_write+0x32/0x40
> [ 429.740048] [<ffffffffad1b0663>] kernfs_fop_write+0x113/0x190
> [ 429.740048] [<ffffffffad13fc52>] __vfs_write+0x32/0x150
> [ 429.740048] [<ffffffffad15f0ae>] ? __fd_install+0x2e/0xe0
> [ 429.740048] [<ffffffffad15ef11>] ? __alloc_fd+0x41/0x180
> [ 429.740048] [<ffffffffad0838dd>] ? percpu_down_read+0xd/0x50
> [ 429.740048] [<ffffffffad140d33>] vfs_write+0xb3/0x1a0
> [ 429.740048] [<ffffffffad13db81>] ? filp_close+0x51/0x70
> [ 429.740048] [<ffffffffad142140>] SyS_write+0x50/0xc0
> [ 429.740048] [<ffffffffad413836>] entry_SYSCALL_64_fastpath+0x1e/0xa8
> [ 429.764069] ---[ end trace ff7835fbf4d983b9 ]---
I think it's something like this.
suppose there are no pools available - the list is empty (see later).
__zswap_param_set():
pool = zswap_pool_find_get(type, compressor);
gives NULL. so it creates a new one
pool = zswap_pool_create(type, compressor);
then it does
ret = param_set_charp(s, kp);
which gives 0 -- all ok. so it goes to
if (!ret) {
put_pool = zswap_pool_current();
}
which gives WARN_ON(), as the list is still empty.
now, how is this possible. for example, we init a zswap with the default
configuration; but zbud is not available (can it be?). so the pool creation
fails, but init_zswap() does not set zswap_init_started back to false. it
either must clear it at the error path, or set it to true right before
'return 0'.
one more problem here is that param_set_charp() does GFP_KERNEL
under zswap_pools_lock.
-ss
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
2016-08-04 11:58 ` Sergey Senozhatsky
@ 2016-08-04 18:15 ` Dan Streetman
2016-08-05 0:43 ` Sergey Senozhatsky
2016-08-07 22:40 ` Vitaly Wool
1 sibling, 1 reply; 10+ messages in thread
From: Dan Streetman @ 2016-08-04 18:15 UTC (permalink / raw)
To: Sergey Senozhatsky
Cc: Seth Jennings, Linux-MM, Vitaly Wool, Marcin Mirosław,
Andrew Morton
[-- Attachment #1: Type: text/plain, Size: 2921 bytes --]
On Thu, Aug 4, 2016 at 7:58 AM, Sergey Senozhatsky <
sergey.senozhatsky.work@gmail.com> wrote:
> Hello,
>
> Cc Seth, Dan
>
> On (08/01/16 11:03), Marcin Mirosław wrote:
> > [ 429.722411] ------------[ cut here ]------------
> > [ 429.723476] WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503
> __zswap_pool_current+0x56/0x60
> > [ 429.740048] Call Trace:
> > [ 429.740048] [<ffffffffad255d43>] dump_stack+0x63/0x90
> > [ 429.740048] [<ffffffffad04c997>] __warn+0xc7/0xf0
> > [ 429.740048] [<ffffffffad04cac8>] warn_slowpath_null+0x18/0x20
> > [ 429.740048] [<ffffffffad1250c6>] __zswap_pool_current+0x56/0x60
> > [ 429.740048] [<ffffffffad1250e3>] zswap_pool_current+0x13/0x20
> > [ 429.740048] [<ffffffffad125efb>] __zswap_param_set+0x1db/0x2f0
> > [ 429.740048] [<ffffffffad126042>] zswap_zpool_param_set+0x12/0x20
> > [ 429.740048] [<ffffffffad06645f>] param_attr_store+0x5f/0xc0
> > [ 429.740048] [<ffffffffad065b69>] module_attr_store+0x19/0x30
> > [ 429.740048] [<ffffffffad1b0b02>] sysfs_kf_write+0x32/0x40
> > [ 429.740048] [<ffffffffad1b0663>] kernfs_fop_write+0x113/0x190
> > [ 429.740048] [<ffffffffad13fc52>] __vfs_write+0x32/0x150
> > [ 429.740048] [<ffffffffad15f0ae>] ? __fd_install+0x2e/0xe0
> > [ 429.740048] [<ffffffffad15ef11>] ? __alloc_fd+0x41/0x180
> > [ 429.740048] [<ffffffffad0838dd>] ? percpu_down_read+0xd/0x50
> > [ 429.740048] [<ffffffffad140d33>] vfs_write+0xb3/0x1a0
> > [ 429.740048] [<ffffffffad13db81>] ? filp_close+0x51/0x70
> > [ 429.740048] [<ffffffffad142140>] SyS_write+0x50/0xc0
> > [ 429.740048] [<ffffffffad413836>] entry_SYSCALL_64_fastpath+0x1e/0xa8
> > [ 429.764069] ---[ end trace ff7835fbf4d983b9 ]---
>
> I think it's something like this.
>
> suppose there are no pools available - the list is empty (see later).
> __zswap_param_set():
>
> pool = zswap_pool_find_get(type, compressor);
>
> gives NULL. so it creates a new one
>
> pool = zswap_pool_create(type, compressor);
>
> then it does
>
> ret = param_set_charp(s, kp);
>
> which gives 0 -- all ok. so it goes to
>
> if (!ret) {
> put_pool = zswap_pool_current();
> }
>
> which gives WARN_ON(), as the list is still empty.
>
>
>
> now, how is this possible. for example, we init a zswap with the default
> configuration; but zbud is not available (can it be?). so the pool creation
> fails, but init_zswap() does not set zswap_init_started back to false. it
> either must clear it at the error path, or set it to true right before
> 'return 0'.
>
yep that's exactly right. I reproduced it with zbud compiled out.
>
> one more problem here is that param_set_charp() does GFP_KERNEL
> under zswap_pools_lock.
>
yep that's true as well.
i can get patches going for both these, unless you're already working on it?
>
> -ss
>
[-- Attachment #2: Type: text/html, Size: 4110 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
2016-08-04 18:15 ` Dan Streetman
@ 2016-08-05 0:43 ` Sergey Senozhatsky
2016-08-05 1:22 ` Sergey Senozhatsky
0 siblings, 1 reply; 10+ messages in thread
From: Sergey Senozhatsky @ 2016-08-05 0:43 UTC (permalink / raw)
To: Dan Streetman
Cc: Sergey Senozhatsky, Seth Jennings, Linux-MM, Vitaly Wool,
Marcin Mirosław, Andrew Morton
On (08/04/16 14:15), Dan Streetman wrote:
[..]
> yep that's exactly right. I reproduced it with zbud compiled out.
[..]
> yep that's true as well.
> i can get patches going for both these, unless you're already working on
> it?
please go ahead.
-ss
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
2016-08-05 0:43 ` Sergey Senozhatsky
@ 2016-08-05 1:22 ` Sergey Senozhatsky
0 siblings, 0 replies; 10+ messages in thread
From: Sergey Senozhatsky @ 2016-08-05 1:22 UTC (permalink / raw)
To: Dan Streetman
Cc: Seth Jennings, Linux-MM, Vitaly Wool, Marcin Mirosław,
Andrew Morton, Sergey Senozhatsky, Sergey Senozhatsky
On (08/05/16 09:43), Sergey Senozhatsky wrote:
> On (08/04/16 14:15), Dan Streetman wrote:
> [..]
> > yep that's exactly right. I reproduced it with zbud compiled out.
> [..]
> > yep that's true as well.
> > i can get patches going for both these, unless you're already working on
> > it?
>
> please go ahead.
while at it.
__zswap_param_set():
pool = zswap_pool_find_get(type, compressor);
if (pool) {
zswap_pool_debug("using existing", pool);
list_del_rcu(&pool->list);
} else {
spin_unlock(&zswap_pools_lock);
pool = zswap_pool_create(type, compressor);
spin_lock(&zswap_pools_lock);
}
if (pool)
ret = param_set_charp(s, kp);
else
ret = -EINVAL;
if (!ret) {
put_pool = zswap_pool_current();
list_add_rcu(&pool->list, &zswap_pools);
} else if (pool) {
/* add the possibly pre-existing pool to the end of the pools
* list; if it's new (and empty) then it'll be removed and
* destroyed by the put after we drop the lock
*/
list_add_tail_rcu(&pool->list, &zswap_pools);
put_pool = pool;
}
this can be simplified, I think.
suppose there is no zswap_pool_find_get() pool. so we try to
zswap_pool_create() one, but it doesn't go well. at this point
we basically can just return -ENOMEM
spin_unlock(&zswap_pools_lock);
pool = zswap_pool_create(type, compressor);
if (!pool)
return -ENOMEM;
spin_lock(&zswap_pools_lock);
so some of later if-s can go away.
-ss
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
2016-08-04 11:58 ` Sergey Senozhatsky
2016-08-04 18:15 ` Dan Streetman
@ 2016-08-07 22:40 ` Vitaly Wool
1 sibling, 0 replies; 10+ messages in thread
From: Vitaly Wool @ 2016-08-07 22:40 UTC (permalink / raw)
To: Sergey Senozhatsky
Cc: Seth Jennings, Dan Streetman, Linux-MM, Marcin Mirosław,
Andrew Morton
Hi Sergey,
On Thu, Aug 4, 2016 at 1:58 PM, Sergey Senozhatsky
<sergey.senozhatsky.work@gmail.com> wrote:
> Hello,
>
> Cc Seth, Dan
>
> On (08/01/16 11:03), Marcin Mirosław wrote:
>> [ 429.722411] ------------[ cut here ]------------
>> [ 429.723476] WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
>> [ 429.740048] Call Trace:
>> [ 429.740048] [<ffffffffad255d43>] dump_stack+0x63/0x90
>> [ 429.740048] [<ffffffffad04c997>] __warn+0xc7/0xf0
>> [ 429.740048] [<ffffffffad04cac8>] warn_slowpath_null+0x18/0x20
>> [ 429.740048] [<ffffffffad1250c6>] __zswap_pool_current+0x56/0x60
>> [ 429.740048] [<ffffffffad1250e3>] zswap_pool_current+0x13/0x20
>> [ 429.740048] [<ffffffffad125efb>] __zswap_param_set+0x1db/0x2f0
>> [ 429.740048] [<ffffffffad126042>] zswap_zpool_param_set+0x12/0x20
>> [ 429.740048] [<ffffffffad06645f>] param_attr_store+0x5f/0xc0
>> [ 429.740048] [<ffffffffad065b69>] module_attr_store+0x19/0x30
>> [ 429.740048] [<ffffffffad1b0b02>] sysfs_kf_write+0x32/0x40
>> [ 429.740048] [<ffffffffad1b0663>] kernfs_fop_write+0x113/0x190
>> [ 429.740048] [<ffffffffad13fc52>] __vfs_write+0x32/0x150
>> [ 429.740048] [<ffffffffad15f0ae>] ? __fd_install+0x2e/0xe0
>> [ 429.740048] [<ffffffffad15ef11>] ? __alloc_fd+0x41/0x180
>> [ 429.740048] [<ffffffffad0838dd>] ? percpu_down_read+0xd/0x50
>> [ 429.740048] [<ffffffffad140d33>] vfs_write+0xb3/0x1a0
>> [ 429.740048] [<ffffffffad13db81>] ? filp_close+0x51/0x70
>> [ 429.740048] [<ffffffffad142140>] SyS_write+0x50/0xc0
>> [ 429.740048] [<ffffffffad413836>] entry_SYSCALL_64_fastpath+0x1e/0xa8
>> [ 429.764069] ---[ end trace ff7835fbf4d983b9 ]---
>
> I think it's something like this.
>
> suppose there are no pools available - the list is empty (see later).
> __zswap_param_set():
>
> pool = zswap_pool_find_get(type, compressor);
>
> gives NULL. so it creates a new one
>
> pool = zswap_pool_create(type, compressor);
>
> then it does
>
> ret = param_set_charp(s, kp);
>
> which gives 0 -- all ok. so it goes to
>
> if (!ret) {
> put_pool = zswap_pool_current();
> }
>
> which gives WARN_ON(), as the list is still empty.
>
>
>
> now, how is this possible. for example, we init a zswap with the default
> configuration; but zbud is not available (can it be?). so the pool creation
> fails, but init_zswap() does not set zswap_init_started back to false. it
> either must clear it at the error path, or set it to true right before
> 'return 0'.
>
> one more problem here is that param_set_charp() does GFP_KERNEL
> under zswap_pools_lock.
>
Thanks a lot for looking into this, I have very limited ability to
debug stuff while on vacation :)
~vitaly
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2016-08-07 22:40 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-08-01 9:03 Choosing z3fold allocator in zswap gives WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60 Marcin Mirosław
2016-08-01 9:08 ` Vitaly Wool
2016-08-01 9:21 ` Marcin Mirosław
2016-08-02 9:13 ` Vitaly Wool
2016-08-02 9:52 ` Marcin Mirosław
2016-08-04 11:58 ` Sergey Senozhatsky
2016-08-04 18:15 ` Dan Streetman
2016-08-05 0:43 ` Sergey Senozhatsky
2016-08-05 1:22 ` Sergey Senozhatsky
2016-08-07 22:40 ` Vitaly Wool
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.