From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-gpio@vger.kernel.org, linux-amlogic@lists.infradead.org,
linus.walleij@linaro.org, khilman@baylibre.com, carlo@caione.org
Cc: linux-arm-kernel@lists.infradead.org,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH 1/2] pinctrl: meson-gxbb: add the pins for the SDIO/sd_emmc_a controller
Date: Sun, 28 Aug 2016 18:47:24 +0200 [thread overview]
Message-ID: <20160828164725.19429-2-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20160828164725.19429-1-martin.blumenstingl@googlemail.com>
sd_emmc_a is used a controller for the SDIO modules. This adds the pin
configuration for the SDIO controller.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 77da6dd..fb479b8 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -163,6 +163,13 @@ static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) };
static const unsigned int sdcard_cmd_pins[] = { PIN(CARD_3, EE_OFF) };
static const unsigned int sdcard_clk_pins[] = { PIN(CARD_2, EE_OFF) };
+static const unsigned int sdio_d0_pins[] = { PIN(GPIOX_0, EE_OFF) };
+static const unsigned int sdio_d1_pins[] = { PIN(GPIOX_1, EE_OFF) };
+static const unsigned int sdio_d2_pins[] = { PIN(GPIOX_2, EE_OFF) };
+static const unsigned int sdio_d3_pins[] = { PIN(GPIOX_3, EE_OFF) };
+static const unsigned int sdio_cmd_pins[] = { PIN(GPIOX_4, EE_OFF) };
+static const unsigned int sdio_clk_pins[] = { PIN(GPIOX_5, EE_OFF) };
+
static const unsigned int uart_tx_a_pins[] = { PIN(GPIOX_12, EE_OFF) };
static const unsigned int uart_rx_a_pins[] = { PIN(GPIOX_13, EE_OFF) };
static const unsigned int uart_cts_a_pins[] = { PIN(GPIOX_14, EE_OFF) };
@@ -370,6 +377,12 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GPIO_GROUP(GPIO_TEST_N, EE_OFF),
/* Bank X */
+ GROUP(sdio_d0, 8, 5),
+ GROUP(sdio_d1, 8, 4),
+ GROUP(sdio_d2, 8, 3),
+ GROUP(sdio_d3, 8, 2),
+ GROUP(sdio_cmd, 8, 1),
+ GROUP(sdio_clk, 8, 0),
GROUP(uart_tx_a, 4, 13),
GROUP(uart_rx_a, 4, 12),
GROUP(uart_cts_a, 4, 11),
@@ -507,6 +520,11 @@ static const char * const sdcard_groups[] = {
"sdcard_cmd", "sdcard_clk",
};
+static const char * const sdio_groups[] = {
+ "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3",
+ "sdio_cmd", "sdio_clk",
+};
+
static const char * const uart_a_groups[] = {
"uart_tx_a", "uart_rx_a", "uart_cts_a", "uart_rts_a",
};
@@ -600,6 +618,7 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
FUNCTION(gpio_periphs),
FUNCTION(emmc),
FUNCTION(sdcard),
+ FUNCTION(sdio),
FUNCTION(uart_a),
FUNCTION(uart_b),
FUNCTION(uart_c),
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] pinctrl: meson-gxbb: add the pins for the SDIO/sd_emmc_a controller
Date: Sun, 28 Aug 2016 18:47:24 +0200 [thread overview]
Message-ID: <20160828164725.19429-2-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20160828164725.19429-1-martin.blumenstingl@googlemail.com>
sd_emmc_a is used a controller for the SDIO modules. This adds the pin
configuration for the SDIO controller.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 77da6dd..fb479b8 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -163,6 +163,13 @@ static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) };
static const unsigned int sdcard_cmd_pins[] = { PIN(CARD_3, EE_OFF) };
static const unsigned int sdcard_clk_pins[] = { PIN(CARD_2, EE_OFF) };
+static const unsigned int sdio_d0_pins[] = { PIN(GPIOX_0, EE_OFF) };
+static const unsigned int sdio_d1_pins[] = { PIN(GPIOX_1, EE_OFF) };
+static const unsigned int sdio_d2_pins[] = { PIN(GPIOX_2, EE_OFF) };
+static const unsigned int sdio_d3_pins[] = { PIN(GPIOX_3, EE_OFF) };
+static const unsigned int sdio_cmd_pins[] = { PIN(GPIOX_4, EE_OFF) };
+static const unsigned int sdio_clk_pins[] = { PIN(GPIOX_5, EE_OFF) };
+
static const unsigned int uart_tx_a_pins[] = { PIN(GPIOX_12, EE_OFF) };
static const unsigned int uart_rx_a_pins[] = { PIN(GPIOX_13, EE_OFF) };
static const unsigned int uart_cts_a_pins[] = { PIN(GPIOX_14, EE_OFF) };
@@ -370,6 +377,12 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GPIO_GROUP(GPIO_TEST_N, EE_OFF),
/* Bank X */
+ GROUP(sdio_d0, 8, 5),
+ GROUP(sdio_d1, 8, 4),
+ GROUP(sdio_d2, 8, 3),
+ GROUP(sdio_d3, 8, 2),
+ GROUP(sdio_cmd, 8, 1),
+ GROUP(sdio_clk, 8, 0),
GROUP(uart_tx_a, 4, 13),
GROUP(uart_rx_a, 4, 12),
GROUP(uart_cts_a, 4, 11),
@@ -507,6 +520,11 @@ static const char * const sdcard_groups[] = {
"sdcard_cmd", "sdcard_clk",
};
+static const char * const sdio_groups[] = {
+ "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3",
+ "sdio_cmd", "sdio_clk",
+};
+
static const char * const uart_a_groups[] = {
"uart_tx_a", "uart_rx_a", "uart_cts_a", "uart_rts_a",
};
@@ -600,6 +618,7 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
FUNCTION(gpio_periphs),
FUNCTION(emmc),
FUNCTION(sdcard),
+ FUNCTION(sdio),
FUNCTION(uart_a),
FUNCTION(uart_b),
FUNCTION(uart_c),
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 1/2] pinctrl: meson-gxbb: add the pins for the SDIO/sd_emmc_a controller
Date: Sun, 28 Aug 2016 18:47:24 +0200 [thread overview]
Message-ID: <20160828164725.19429-2-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20160828164725.19429-1-martin.blumenstingl@googlemail.com>
sd_emmc_a is used a controller for the SDIO modules. This adds the pin
configuration for the SDIO controller.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 77da6dd..fb479b8 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -163,6 +163,13 @@ static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) };
static const unsigned int sdcard_cmd_pins[] = { PIN(CARD_3, EE_OFF) };
static const unsigned int sdcard_clk_pins[] = { PIN(CARD_2, EE_OFF) };
+static const unsigned int sdio_d0_pins[] = { PIN(GPIOX_0, EE_OFF) };
+static const unsigned int sdio_d1_pins[] = { PIN(GPIOX_1, EE_OFF) };
+static const unsigned int sdio_d2_pins[] = { PIN(GPIOX_2, EE_OFF) };
+static const unsigned int sdio_d3_pins[] = { PIN(GPIOX_3, EE_OFF) };
+static const unsigned int sdio_cmd_pins[] = { PIN(GPIOX_4, EE_OFF) };
+static const unsigned int sdio_clk_pins[] = { PIN(GPIOX_5, EE_OFF) };
+
static const unsigned int uart_tx_a_pins[] = { PIN(GPIOX_12, EE_OFF) };
static const unsigned int uart_rx_a_pins[] = { PIN(GPIOX_13, EE_OFF) };
static const unsigned int uart_cts_a_pins[] = { PIN(GPIOX_14, EE_OFF) };
@@ -370,6 +377,12 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GPIO_GROUP(GPIO_TEST_N, EE_OFF),
/* Bank X */
+ GROUP(sdio_d0, 8, 5),
+ GROUP(sdio_d1, 8, 4),
+ GROUP(sdio_d2, 8, 3),
+ GROUP(sdio_d3, 8, 2),
+ GROUP(sdio_cmd, 8, 1),
+ GROUP(sdio_clk, 8, 0),
GROUP(uart_tx_a, 4, 13),
GROUP(uart_rx_a, 4, 12),
GROUP(uart_cts_a, 4, 11),
@@ -507,6 +520,11 @@ static const char * const sdcard_groups[] = {
"sdcard_cmd", "sdcard_clk",
};
+static const char * const sdio_groups[] = {
+ "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3",
+ "sdio_cmd", "sdio_clk",
+};
+
static const char * const uart_a_groups[] = {
"uart_tx_a", "uart_rx_a", "uart_cts_a", "uart_rts_a",
};
@@ -600,6 +618,7 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
FUNCTION(gpio_periphs),
FUNCTION(emmc),
FUNCTION(sdcard),
+ FUNCTION(sdio),
FUNCTION(uart_a),
FUNCTION(uart_b),
FUNCTION(uart_c),
--
2.9.3
next prev parent reply other threads:[~2016-08-28 16:47 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-28 16:47 [PATCH 0/2] add support for the SDIO pins on GXBB Martin Blumenstingl
2016-08-28 16:47 ` Martin Blumenstingl
2016-08-28 16:47 ` Martin Blumenstingl
2016-08-28 16:47 ` Martin Blumenstingl [this message]
2016-08-28 16:47 ` [PATCH 1/2] pinctrl: meson-gxbb: add the pins for the SDIO/sd_emmc_a controller Martin Blumenstingl
2016-08-28 16:47 ` Martin Blumenstingl
2016-09-07 14:24 ` Linus Walleij
2016-09-07 14:24 ` Linus Walleij
2016-09-07 14:24 ` Linus Walleij
2016-09-07 18:55 ` Martin Blumenstingl
2016-09-07 18:55 ` Martin Blumenstingl
2016-09-07 18:55 ` Martin Blumenstingl
2016-09-12 12:22 ` Linus Walleij
2016-09-12 12:22 ` Linus Walleij
2016-09-12 12:22 ` Linus Walleij
2016-09-07 19:07 ` Kevin Hilman
2016-09-07 19:07 ` Kevin Hilman
2016-09-07 19:07 ` Kevin Hilman
2016-08-28 16:47 ` [PATCH 2/2] ARM64: dts: meson-gxbb: add the SDIO pins Martin Blumenstingl
2016-08-28 16:47 ` Martin Blumenstingl
2016-08-28 16:47 ` Martin Blumenstingl
2016-08-28 19:13 ` Rask Ingemann Lambertsen
2016-08-28 19:13 ` Rask Ingemann Lambertsen
2016-08-28 19:13 ` Rask Ingemann Lambertsen
2016-09-04 17:55 ` Martin Blumenstingl
2016-09-04 17:55 ` Martin Blumenstingl
2016-09-04 17:55 ` Martin Blumenstingl
2016-09-07 14:23 ` Linus Walleij
2016-09-07 14:23 ` Linus Walleij
2016-09-07 14:23 ` Linus Walleij
2016-09-11 12:39 ` [PATCH v2 0/2] add support for the SDIO pins on GXBB Martin Blumenstingl
2016-09-11 12:39 ` Martin Blumenstingl
2016-09-11 12:39 ` Martin Blumenstingl
2016-09-11 12:39 ` [PATCH v2 1/2] pinctrl: meson-gxbb: add the missing SDIO interrupt pin Martin Blumenstingl
2016-09-11 12:39 ` Martin Blumenstingl
2016-09-11 12:39 ` Martin Blumenstingl
2016-09-12 18:07 ` Kevin Hilman
2016-09-12 18:07 ` Kevin Hilman
2016-09-12 18:07 ` Kevin Hilman
2016-09-13 11:38 ` Linus Walleij
2016-09-13 11:38 ` Linus Walleij
2016-09-13 11:38 ` Linus Walleij
2016-09-11 12:39 ` [PATCH v2 2/2] ARM64: dts: meson-gxbb: add the SDIO pins Martin Blumenstingl
2016-09-11 12:39 ` Martin Blumenstingl
2016-09-11 12:39 ` Martin Blumenstingl
2016-09-12 18:13 ` Kevin Hilman
2016-09-12 18:13 ` Kevin Hilman
2016-09-12 18:13 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160828164725.19429-2-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=carlo@caione.org \
--cc=khilman@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.