* input: touchscreen: silead_gsl1680: Document firmware-name, fix implementation @ 2016-08-29 19:29 ` Hans de Goede 0 siblings, 0 replies; 8+ messages in thread From: Hans de Goede @ 2016-08-29 19:29 UTC (permalink / raw) To: Dmitry Torokhov, Rob Herring Cc: Maxime Ripard, Chen-Yu Tsai, linux-input-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree Hi All, As discussed here is a patch to update the gsl1680 driver binding doc to document the usage of firmware-name for specifying which firmware to load. Since the driver as merged in 4.8-rc1 uses touchscreen-fw-name, this patch also updates the driver and moves the addition of the "silead/" prefix to the driver instead of having to specify the prefix in the dt. I've also added a second patch to also prefix the default / fallback firmware-names with "silead/". Dmitry, since no kernel has been released with the old firmware names yet, it would be good if we can get both of these merged as a fix to 4.8, so that no one can end up depending on the old behavior. Thanks & Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
* input: touchscreen: silead_gsl1680: Document firmware-name, fix implementation @ 2016-08-29 19:29 ` Hans de Goede 0 siblings, 0 replies; 8+ messages in thread From: Hans de Goede @ 2016-08-29 19:29 UTC (permalink / raw) To: linux-arm-kernel Hi All, As discussed here is a patch to update the gsl1680 driver binding doc to document the usage of firmware-name for specifying which firmware to load. Since the driver as merged in 4.8-rc1 uses touchscreen-fw-name, this patch also updates the driver and moves the addition of the "silead/" prefix to the driver instead of having to specify the prefix in the dt. I've also added a second patch to also prefix the default / fallback firmware-names with "silead/". Dmitry, since no kernel has been released with the old firmware names yet, it would be good if we can get both of these merged as a fix to 4.8, so that no one can end up depending on the old behavior. Thanks & Regards, Hans ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <20160829192937.32129-1-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* [PATCH v2 1/2] input: touchscreen: silead_gsl1680: Document firmware-name, fix implementation 2016-08-29 19:29 ` Hans de Goede @ 2016-08-29 19:29 ` Hans de Goede -1 siblings, 0 replies; 8+ messages in thread From: Hans de Goede @ 2016-08-29 19:29 UTC (permalink / raw) To: Dmitry Torokhov, Rob Herring Cc: Maxime Ripard, Chen-Yu Tsai, linux-input-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, Hans de Goede The driver has supported touchscreen-fw-name to specify the firmware to load since it has been merged, but this was omitted from the dt-binding documentation. During review of adding touchscreen-fw-name to the binding documentation it was brought up that there is a standard property name called "firmware-name" for this, which should be used. Since there are no users of touchscreen-fw-name yet, this commit adds documentation of "firmware-name" to the dt-binding documentation and switches the driver over to use this. This commit also makes the driver add a "silead/" prefix to the firmware name from dt before calling request_firmware. That the firmware files are stored under /lib/firmware/silead under Linux is an implementation detail and does not belong in devicetree. Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- .../devicetree/bindings/input/touchscreen/silead_gsl1680.txt | 1 + drivers/input/touchscreen/silead.c | 5 +++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt index ad7f41a..b726823 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt @@ -17,6 +17,7 @@ Required properties: - touchscreen-size-y : See touchscreen.txt Optional properties: +- firmware-name : File basename (string) for board specific firmware - touchscreen-inverted-x : See touchscreen.txt - touchscreen-inverted-y : See touchscreen.txt - touchscreen-swapped-x-y : See touchscreen.txt diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index 3b80f14..7709f5b 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -393,9 +393,10 @@ static void silead_ts_read_props(struct i2c_client *client) data->max_fingers = 5; /* Most devices handle up-to 5 fingers */ } - error = device_property_read_string(dev, "touchscreen-fw-name", &str); + error = device_property_read_string(dev, "firmware-name", &str); if (!error) - snprintf(data->fw_name, sizeof(data->fw_name), "%s", str); + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s", str); else dev_dbg(dev, "Firmware file name read error. Using default."); } -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 1/2] input: touchscreen: silead_gsl1680: Document firmware-name, fix implementation @ 2016-08-29 19:29 ` Hans de Goede 0 siblings, 0 replies; 8+ messages in thread From: Hans de Goede @ 2016-08-29 19:29 UTC (permalink / raw) To: linux-arm-kernel The driver has supported touchscreen-fw-name to specify the firmware to load since it has been merged, but this was omitted from the dt-binding documentation. During review of adding touchscreen-fw-name to the binding documentation it was brought up that there is a standard property name called "firmware-name" for this, which should be used. Since there are no users of touchscreen-fw-name yet, this commit adds documentation of "firmware-name" to the dt-binding documentation and switches the driver over to use this. This commit also makes the driver add a "silead/" prefix to the firmware name from dt before calling request_firmware. That the firmware files are stored under /lib/firmware/silead under Linux is an implementation detail and does not belong in devicetree. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- .../devicetree/bindings/input/touchscreen/silead_gsl1680.txt | 1 + drivers/input/touchscreen/silead.c | 5 +++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt index ad7f41a..b726823 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt @@ -17,6 +17,7 @@ Required properties: - touchscreen-size-y : See touchscreen.txt Optional properties: +- firmware-name : File basename (string) for board specific firmware - touchscreen-inverted-x : See touchscreen.txt - touchscreen-inverted-y : See touchscreen.txt - touchscreen-swapped-x-y : See touchscreen.txt diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index 3b80f14..7709f5b 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -393,9 +393,10 @@ static void silead_ts_read_props(struct i2c_client *client) data->max_fingers = 5; /* Most devices handle up-to 5 fingers */ } - error = device_property_read_string(dev, "touchscreen-fw-name", &str); + error = device_property_read_string(dev, "firmware-name", &str); if (!error) - snprintf(data->fw_name, sizeof(data->fw_name), "%s", str); + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s", str); else dev_dbg(dev, "Firmware file name read error. Using default."); } -- 2.9.3 ^ permalink raw reply related [flat|nested] 8+ messages in thread
[parent not found: <20160829192937.32129-2-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH v2 1/2] input: touchscreen: silead_gsl1680: Document firmware-name, fix implementation 2016-08-29 19:29 ` Hans de Goede @ 2016-09-02 14:39 ` Rob Herring -1 siblings, 0 replies; 8+ messages in thread From: Rob Herring @ 2016-09-02 14:39 UTC (permalink / raw) To: Hans de Goede Cc: Dmitry Torokhov, Maxime Ripard, Chen-Yu Tsai, linux-input-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree On Mon, Aug 29, 2016 at 09:29:36PM +0200, Hans de Goede wrote: > The driver has supported touchscreen-fw-name to specify the firmware to > load since it has been merged, but this was omitted from the dt-binding > documentation. > > During review of adding touchscreen-fw-name to the binding documentation > it was brought up that there is a standard property name called > "firmware-name" for this, which should be used. > > Since there are no users of touchscreen-fw-name yet, this commit > adds documentation of "firmware-name" to the dt-binding documentation > and switches the driver over to use this. > > This commit also makes the driver add a "silead/" prefix to the > firmware name from dt before calling request_firmware. That the > firmware files are stored under /lib/firmware/silead under Linux > is an implementation detail and does not belong in devicetree. > > Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> > --- > .../devicetree/bindings/input/touchscreen/silead_gsl1680.txt | 1 + > drivers/input/touchscreen/silead.c | 5 +++-- > 2 files changed, 4 insertions(+), 2 deletions(-) Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 1/2] input: touchscreen: silead_gsl1680: Document firmware-name, fix implementation @ 2016-09-02 14:39 ` Rob Herring 0 siblings, 0 replies; 8+ messages in thread From: Rob Herring @ 2016-09-02 14:39 UTC (permalink / raw) To: linux-arm-kernel On Mon, Aug 29, 2016 at 09:29:36PM +0200, Hans de Goede wrote: > The driver has supported touchscreen-fw-name to specify the firmware to > load since it has been merged, but this was omitted from the dt-binding > documentation. > > During review of adding touchscreen-fw-name to the binding documentation > it was brought up that there is a standard property name called > "firmware-name" for this, which should be used. > > Since there are no users of touchscreen-fw-name yet, this commit > adds documentation of "firmware-name" to the dt-binding documentation > and switches the driver over to use this. > > This commit also makes the driver add a "silead/" prefix to the > firmware name from dt before calling request_firmware. That the > firmware files are stored under /lib/firmware/silead under Linux > is an implementation detail and does not belong in devicetree. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > .../devicetree/bindings/input/touchscreen/silead_gsl1680.txt | 1 + > drivers/input/touchscreen/silead.c | 5 +++-- > 2 files changed, 4 insertions(+), 2 deletions(-) Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 2/2] input: touchscreen: silead_gsl1680: Use "silead/" prefix for firmware loading 2016-08-29 19:29 ` Hans de Goede @ 2016-08-29 19:29 ` Hans de Goede -1 siblings, 0 replies; 8+ messages in thread From: Hans de Goede @ 2016-08-29 19:29 UTC (permalink / raw) To: Dmitry Torokhov, Rob Herring Cc: Maxime Ripard, Chen-Yu Tsai, linux-input-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree, Hans de Goede The silead touch-controller ICs use a different firmware per digitizer / tablet model. So there are going to be quite a few of then and they really should be under a separate subdir. This commit prefixes the default firmware names with "silead/" just like we are already doing for devicetree specified firmware names. Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- drivers/input/touchscreen/silead.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index 7709f5b..c6a1ae9 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -414,14 +414,14 @@ static int silead_ts_set_default_fw_name(struct silead_ts_data *data, if (!acpi_id) return -ENODEV; - snprintf(data->fw_name, sizeof(data->fw_name), "%s.fw", - acpi_id->id); + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s.fw", acpi_id->id); for (i = 0; i < strlen(data->fw_name); i++) data->fw_name[i] = tolower(data->fw_name[i]); } else { - snprintf(data->fw_name, sizeof(data->fw_name), "%s.fw", - id->name); + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s.fw", id->name); } return 0; @@ -430,7 +430,8 @@ static int silead_ts_set_default_fw_name(struct silead_ts_data *data, static int silead_ts_set_default_fw_name(struct silead_ts_data *data, const struct i2c_device_id *id) { - snprintf(data->fw_name, sizeof(data->fw_name), "%s.fw", id->name); + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s.fw", id->name); return 0; } #endif -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 2/2] input: touchscreen: silead_gsl1680: Use "silead/" prefix for firmware loading @ 2016-08-29 19:29 ` Hans de Goede 0 siblings, 0 replies; 8+ messages in thread From: Hans de Goede @ 2016-08-29 19:29 UTC (permalink / raw) To: linux-arm-kernel The silead touch-controller ICs use a different firmware per digitizer / tablet model. So there are going to be quite a few of then and they really should be under a separate subdir. This commit prefixes the default firmware names with "silead/" just like we are already doing for devicetree specified firmware names. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/input/touchscreen/silead.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index 7709f5b..c6a1ae9 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -414,14 +414,14 @@ static int silead_ts_set_default_fw_name(struct silead_ts_data *data, if (!acpi_id) return -ENODEV; - snprintf(data->fw_name, sizeof(data->fw_name), "%s.fw", - acpi_id->id); + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s.fw", acpi_id->id); for (i = 0; i < strlen(data->fw_name); i++) data->fw_name[i] = tolower(data->fw_name[i]); } else { - snprintf(data->fw_name, sizeof(data->fw_name), "%s.fw", - id->name); + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s.fw", id->name); } return 0; @@ -430,7 +430,8 @@ static int silead_ts_set_default_fw_name(struct silead_ts_data *data, static int silead_ts_set_default_fw_name(struct silead_ts_data *data, const struct i2c_device_id *id) { - snprintf(data->fw_name, sizeof(data->fw_name), "%s.fw", id->name); + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s.fw", id->name); return 0; } #endif -- 2.9.3 ^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-09-02 14:39 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-08-29 19:29 input: touchscreen: silead_gsl1680: Document firmware-name, fix implementation Hans de Goede 2016-08-29 19:29 ` Hans de Goede [not found] ` <20160829192937.32129-1-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-08-29 19:29 ` [PATCH v2 1/2] " Hans de Goede 2016-08-29 19:29 ` Hans de Goede [not found] ` <20160829192937.32129-2-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-09-02 14:39 ` Rob Herring 2016-09-02 14:39 ` Rob Herring 2016-08-29 19:29 ` [PATCH v2 2/2] input: touchscreen: silead_gsl1680: Use "silead/" prefix for firmware loading Hans de Goede 2016-08-29 19:29 ` Hans de Goede
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.