* [PATCH v2 00/26] MIPS generic kernels, SEAD-3 & Boston support
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Paolo Bonzini, Guenter Roeck, John Crispin,
Maciej W. Rozycki, Bjorn Helgaas, Jacek Anaszewski, Jason Cooper,
Robin Murphy, Hans-Christian Noren Egtvedt, James Hogan,
John Crispin, Sergey Ryazanov, Michael Turquette, Qais Yousef,
Valentin Rothberg, Huacai Chen, Kefeng Wang, Thomas Gleixner,
linux-clk, Krzysztof Kozlowski, Florian Fainelli, Will Deacon,
Alex Smith, Andrew Morton, Max Filippov, devicetree, Qais Yousef,
Stephen Boyd, Markos Chandras, Marc Zyngier, Matt Redfearn,
Masahiro Yamada, Lorenzo Pieralisi, Kees Cook, linux-kernel,
Rob Herring, Yinghai Lu, Mark Rutland, Anna-Maria Gleixner
This series introduces some infrastructure for building generic kernels
which will run on multiple boards depending upon the device tree
provided to them by the bootloader. It converts SEAD-3 to make use of
this, and adds support for the MIPS Boston development platform.
The Boston support can be tested in QEMU with this patchset applied:
https://lists.gnu.org/archive/html/qemu-devel/2016-08/msg03419.html
To do so, configure the kernel for the generic 64r6el_defconfig & run
QEMU like so:
$ make ARCH=mips 64r6el_defconfig
$ make ARCH=mips CROSS_COMPILE=my-toolchain-
$ qemu-system-mips64el -M boston \
-kernel arch/mips/boot/vmlinux.gz.itb \
serial stdio
The same kernel binary will also boot on a SEAD-3 if using a bootloader
capable of loading the FIT image format (ie. U-Boot). These 2 boards
form the starting point for the generic kernels, with Ci20 & Ci40 able
to be added easily. Malta will require further work, but I've got most
peripherals converted to probe using device tree as a starting point &
will submit that separately.
This series applies atop v4.8-rc3 with my "MIPS: SEAD3 device tree
conversion" series applied first.
Paul Burton (26):
MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
MIPS: PCI: Make pcibios_set_cache_line_size an initcall
MIPS: PCI: Inline pcibios_assign_all_busses
MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
MIPS: PCI: Support generic drivers
MIPS: Sanitise coherentio semantics
MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
MIPS: Support per-device DMA coherence
MIPS: Print CM error reports upon bus errors
dt-bindings: Document mti,mips-cpc binding
MIPS: CPC: Provide a default mips_cpc_default_phys_base
dt-bindings: Document mti,mips-cdmm binding
MIPS: CDMM: Allow CDMM base address to be specified via DT
irqchip: mips-cpu: Replace magic 0x100 with IE_SW0
irqchip: mips-cpu: Prepare for non-legacy IRQ domains
irqchip: mips-cpu: Introduce IPI IRQ domain support
MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support
MIPS: Stengthen IPI IRQ domain sanity check
MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
MIPS: Support generating Flattened Image Trees (.itb)
MIPS: generic: Introduce generic DT-based board support
MIPS: generic: Convert SEAD-3 to a generic board
dt-bindings: Document img,boston-clock binding
clk: boston: Add a driver for MIPS Boston board clocks
MIPS: generic: Support MIPS Boston development boards
.../devicetree/bindings/clock/img,boston-clock.txt | 27 ++
.../devicetree/bindings/misc/mti,mips-cdmm.txt | 8 +
.../devicetree/bindings/misc/mti,mips-cpc.txt | 8 +
arch/mips/Kbuild.platforms | 2 +-
arch/mips/Kconfig | 105 ++++---
arch/mips/Makefile | 77 +++++-
arch/mips/alchemy/common/setup.c | 6 +-
arch/mips/boot/Makefile | 66 +++++
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/img/Makefile | 7 +
arch/mips/boot/dts/img/boston.dts | 230 ++++++++++++++++
arch/mips/boot/dts/mti/Makefile | 2 +-
arch/mips/boot/dts/mti/sead3.dts | 1 +
arch/mips/configs/generic/32r1.config | 2 +
arch/mips/configs/generic/32r2.config | 3 +
arch/mips/configs/generic/32r6.config | 2 +
arch/mips/configs/generic/64r1.config | 4 +
arch/mips/configs/generic/64r2.config | 5 +
arch/mips/configs/generic/64r6.config | 4 +
arch/mips/configs/generic/board-boston.config | 46 ++++
arch/mips/configs/generic/board-sead-3.config | 32 +++
arch/mips/configs/generic/eb.config | 1 +
arch/mips/configs/generic/el.config | 1 +
arch/mips/configs/generic/micro32r2.config | 4 +
arch/mips/configs/generic_defconfig | 96 +++++++
arch/mips/configs/sead3_defconfig | 129 ---------
arch/mips/configs/sead3micro_defconfig | 122 ---------
arch/mips/generic/Kconfig | 27 ++
arch/mips/generic/Makefile | 15 +
arch/mips/generic/Platform | 14 +
.../sead3-dtshim.c => generic/board-sead3.c} | 106 +++++++-
arch/mips/generic/init.c | 172 ++++++++++++
arch/mips/generic/irq.c | 64 +++++
arch/mips/generic/proc.c | 29 ++
arch/mips/generic/vmlinux.its.S | 56 ++++
arch/mips/include/asm/addrspace.h | 3 +-
arch/mips/include/asm/device.h | 5 +
arch/mips/include/asm/dma-coherence.h | 16 +-
arch/mips/include/asm/dma-mapping.h | 10 +
arch/mips/include/asm/mach-generic/dma-coherence.h | 14 +-
arch/mips/include/asm/mach-generic/spaces.h | 8 +-
arch/mips/include/asm/mach-ip27/spaces.h | 1 +
.../include/asm/mach-sead3/cpu-feature-overrides.h | 72 -----
arch/mips/include/asm/mach-sead3/irq.h | 9 -
.../include/asm/mach-sead3/kernel-entry-init.h | 21 --
arch/mips/include/asm/mach-sead3/sead3-dtshim.h | 29 --
arch/mips/include/asm/mach-sead3/war.h | 24 --
arch/mips/include/asm/machine.h | 63 +++++
arch/mips/include/asm/pci.h | 57 +++-
arch/mips/kernel/mips-cpc.c | 18 ++
arch/mips/kernel/smp-mt.c | 49 +---
arch/mips/kernel/smp.c | 20 +-
arch/mips/kernel/traps.c | 3 +
arch/mips/lantiq/irq.c | 52 ----
arch/mips/lib/iomap-pci.c | 4 +
arch/mips/mm/c-r4k.c | 7 +-
arch/mips/mm/dma-default.c | 16 +-
arch/mips/mti-malta/malta-int.c | 90 +-----
arch/mips/mti-malta/malta-setup.c | 10 +-
arch/mips/mti-sead3/Makefile | 15 -
arch/mips/mti-sead3/Platform | 7 -
arch/mips/mti-sead3/sead3-init.c | 100 -------
arch/mips/mti-sead3/sead3-int.c | 23 --
arch/mips/mti-sead3/sead3-setup.c | 39 ---
arch/mips/mti-sead3/sead3-time.c | 91 -------
arch/mips/pci/Makefile | 2 +
arch/mips/pci/pci-alchemy.c | 3 +-
arch/mips/pci/pci-generic.c | 52 ++++
arch/mips/pci/pci-legacy.c | 302 +++++++++++++++++++++
arch/mips/pci/pci.c | 296 +-------------------
drivers/bus/mips_cdmm.c | 13 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/imgtec/Kconfig | 10 +
drivers/clk/imgtec/Makefile | 1 +
drivers/clk/imgtec/clk-boston.c | 101 +++++++
drivers/irqchip/Kconfig | 2 +
drivers/irqchip/irq-mips-cpu.c | 149 ++++++++--
include/dt-bindings/clock/boston-clock.h | 14 +
79 files changed, 2018 insertions(+), 1279 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/img,boston-clock.txt
create mode 100644 Documentation/devicetree/bindings/misc/mti,mips-cdmm.txt
create mode 100644 Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
create mode 100644 arch/mips/boot/dts/img/Makefile
create mode 100644 arch/mips/boot/dts/img/boston.dts
create mode 100644 arch/mips/configs/generic/32r1.config
create mode 100644 arch/mips/configs/generic/32r2.config
create mode 100644 arch/mips/configs/generic/32r6.config
create mode 100644 arch/mips/configs/generic/64r1.config
create mode 100644 arch/mips/configs/generic/64r2.config
create mode 100644 arch/mips/configs/generic/64r6.config
create mode 100644 arch/mips/configs/generic/board-boston.config
create mode 100644 arch/mips/configs/generic/board-sead-3.config
create mode 100644 arch/mips/configs/generic/eb.config
create mode 100644 arch/mips/configs/generic/el.config
create mode 100644 arch/mips/configs/generic/micro32r2.config
create mode 100644 arch/mips/configs/generic_defconfig
delete mode 100644 arch/mips/configs/sead3_defconfig
delete mode 100644 arch/mips/configs/sead3micro_defconfig
create mode 100644 arch/mips/generic/Kconfig
create mode 100644 arch/mips/generic/Makefile
create mode 100644 arch/mips/generic/Platform
rename arch/mips/{mti-sead3/sead3-dtshim.c => generic/board-sead3.c} (72%)
create mode 100644 arch/mips/generic/init.c
create mode 100644 arch/mips/generic/irq.c
create mode 100644 arch/mips/generic/proc.c
create mode 100644 arch/mips/generic/vmlinux.its.S
delete mode 100644 arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
delete mode 100644 arch/mips/include/asm/mach-sead3/irq.h
delete mode 100644 arch/mips/include/asm/mach-sead3/kernel-entry-init.h
delete mode 100644 arch/mips/include/asm/mach-sead3/sead3-dtshim.h
delete mode 100644 arch/mips/include/asm/mach-sead3/war.h
create mode 100644 arch/mips/include/asm/machine.h
delete mode 100644 arch/mips/mti-sead3/Makefile
delete mode 100644 arch/mips/mti-sead3/Platform
delete mode 100644 arch/mips/mti-sead3/sead3-init.c
delete mode 100644 arch/mips/mti-sead3/sead3-int.c
delete mode 100644 arch/mips/mti-sead3/sead3-setup.c
delete mode 100644 arch/mips/mti-sead3/sead3-time.c
create mode 100644 arch/mips/pci/pci-generic.c
create mode 100644 arch/mips/pci/pci-legacy.c
create mode 100644 drivers/clk/imgtec/Kconfig
create mode 100644 drivers/clk/imgtec/Makefile
create mode 100644 drivers/clk/imgtec/clk-boston.c
create mode 100644 include/dt-bindings/clock/boston-clock.h
--
2.9.3
^ permalink raw reply [flat|nested] 58+ messages in thread* [PATCH v2 00/26] MIPS generic kernels, SEAD-3 & Boston support
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Paolo Bonzini, Guenter Roeck, John Crispin,
Maciej W. Rozycki, Bjorn Helgaas, Jacek Anaszewski, Jason Cooper,
Robin Murphy, Hans-Christian Noren Egtvedt, James Hogan,
John Crispin, Sergey Ryazanov, Michael Turquette, Qais Yousef,
Valentin Rothberg, Huacai Chen, Kefeng Wang, Thomas Gleixner
This series introduces some infrastructure for building generic kernels
which will run on multiple boards depending upon the device tree
provided to them by the bootloader. It converts SEAD-3 to make use of
this, and adds support for the MIPS Boston development platform.
The Boston support can be tested in QEMU with this patchset applied:
https://lists.gnu.org/archive/html/qemu-devel/2016-08/msg03419.html
To do so, configure the kernel for the generic 64r6el_defconfig & run
QEMU like so:
$ make ARCH=mips 64r6el_defconfig
$ make ARCH=mips CROSS_COMPILE=my-toolchain-
$ qemu-system-mips64el -M boston \
-kernel arch/mips/boot/vmlinux.gz.itb \
serial stdio
The same kernel binary will also boot on a SEAD-3 if using a bootloader
capable of loading the FIT image format (ie. U-Boot). These 2 boards
form the starting point for the generic kernels, with Ci20 & Ci40 able
to be added easily. Malta will require further work, but I've got most
peripherals converted to probe using device tree as a starting point &
will submit that separately.
This series applies atop v4.8-rc3 with my "MIPS: SEAD3 device tree
conversion" series applied first.
Paul Burton (26):
MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
MIPS: PCI: Make pcibios_set_cache_line_size an initcall
MIPS: PCI: Inline pcibios_assign_all_busses
MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
MIPS: PCI: Support generic drivers
MIPS: Sanitise coherentio semantics
MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
MIPS: Support per-device DMA coherence
MIPS: Print CM error reports upon bus errors
dt-bindings: Document mti,mips-cpc binding
MIPS: CPC: Provide a default mips_cpc_default_phys_base
dt-bindings: Document mti,mips-cdmm binding
MIPS: CDMM: Allow CDMM base address to be specified via DT
irqchip: mips-cpu: Replace magic 0x100 with IE_SW0
irqchip: mips-cpu: Prepare for non-legacy IRQ domains
irqchip: mips-cpu: Introduce IPI IRQ domain support
MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support
MIPS: Stengthen IPI IRQ domain sanity check
MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
MIPS: Support generating Flattened Image Trees (.itb)
MIPS: generic: Introduce generic DT-based board support
MIPS: generic: Convert SEAD-3 to a generic board
dt-bindings: Document img,boston-clock binding
clk: boston: Add a driver for MIPS Boston board clocks
MIPS: generic: Support MIPS Boston development boards
.../devicetree/bindings/clock/img,boston-clock.txt | 27 ++
.../devicetree/bindings/misc/mti,mips-cdmm.txt | 8 +
.../devicetree/bindings/misc/mti,mips-cpc.txt | 8 +
arch/mips/Kbuild.platforms | 2 +-
arch/mips/Kconfig | 105 ++++---
arch/mips/Makefile | 77 +++++-
arch/mips/alchemy/common/setup.c | 6 +-
arch/mips/boot/Makefile | 66 +++++
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/img/Makefile | 7 +
arch/mips/boot/dts/img/boston.dts | 230 ++++++++++++++++
arch/mips/boot/dts/mti/Makefile | 2 +-
arch/mips/boot/dts/mti/sead3.dts | 1 +
arch/mips/configs/generic/32r1.config | 2 +
arch/mips/configs/generic/32r2.config | 3 +
arch/mips/configs/generic/32r6.config | 2 +
arch/mips/configs/generic/64r1.config | 4 +
arch/mips/configs/generic/64r2.config | 5 +
arch/mips/configs/generic/64r6.config | 4 +
arch/mips/configs/generic/board-boston.config | 46 ++++
arch/mips/configs/generic/board-sead-3.config | 32 +++
arch/mips/configs/generic/eb.config | 1 +
arch/mips/configs/generic/el.config | 1 +
arch/mips/configs/generic/micro32r2.config | 4 +
arch/mips/configs/generic_defconfig | 96 +++++++
arch/mips/configs/sead3_defconfig | 129 ---------
arch/mips/configs/sead3micro_defconfig | 122 ---------
arch/mips/generic/Kconfig | 27 ++
arch/mips/generic/Makefile | 15 +
arch/mips/generic/Platform | 14 +
.../sead3-dtshim.c => generic/board-sead3.c} | 106 +++++++-
arch/mips/generic/init.c | 172 ++++++++++++
arch/mips/generic/irq.c | 64 +++++
arch/mips/generic/proc.c | 29 ++
arch/mips/generic/vmlinux.its.S | 56 ++++
arch/mips/include/asm/addrspace.h | 3 +-
arch/mips/include/asm/device.h | 5 +
arch/mips/include/asm/dma-coherence.h | 16 +-
arch/mips/include/asm/dma-mapping.h | 10 +
arch/mips/include/asm/mach-generic/dma-coherence.h | 14 +-
arch/mips/include/asm/mach-generic/spaces.h | 8 +-
arch/mips/include/asm/mach-ip27/spaces.h | 1 +
.../include/asm/mach-sead3/cpu-feature-overrides.h | 72 -----
arch/mips/include/asm/mach-sead3/irq.h | 9 -
.../include/asm/mach-sead3/kernel-entry-init.h | 21 --
arch/mips/include/asm/mach-sead3/sead3-dtshim.h | 29 --
arch/mips/include/asm/mach-sead3/war.h | 24 --
arch/mips/include/asm/machine.h | 63 +++++
arch/mips/include/asm/pci.h | 57 +++-
arch/mips/kernel/mips-cpc.c | 18 ++
arch/mips/kernel/smp-mt.c | 49 +---
arch/mips/kernel/smp.c | 20 +-
arch/mips/kernel/traps.c | 3 +
arch/mips/lantiq/irq.c | 52 ----
arch/mips/lib/iomap-pci.c | 4 +
arch/mips/mm/c-r4k.c | 7 +-
arch/mips/mm/dma-default.c | 16 +-
arch/mips/mti-malta/malta-int.c | 90 +-----
arch/mips/mti-malta/malta-setup.c | 10 +-
arch/mips/mti-sead3/Makefile | 15 -
arch/mips/mti-sead3/Platform | 7 -
arch/mips/mti-sead3/sead3-init.c | 100 -------
arch/mips/mti-sead3/sead3-int.c | 23 --
arch/mips/mti-sead3/sead3-setup.c | 39 ---
arch/mips/mti-sead3/sead3-time.c | 91 -------
arch/mips/pci/Makefile | 2 +
arch/mips/pci/pci-alchemy.c | 3 +-
arch/mips/pci/pci-generic.c | 52 ++++
arch/mips/pci/pci-legacy.c | 302 +++++++++++++++++++++
arch/mips/pci/pci.c | 296 +-------------------
drivers/bus/mips_cdmm.c | 13 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/imgtec/Kconfig | 10 +
drivers/clk/imgtec/Makefile | 1 +
drivers/clk/imgtec/clk-boston.c | 101 +++++++
drivers/irqchip/Kconfig | 2 +
drivers/irqchip/irq-mips-cpu.c | 149 ++++++++--
include/dt-bindings/clock/boston-clock.h | 14 +
79 files changed, 2018 insertions(+), 1279 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/img,boston-clock.txt
create mode 100644 Documentation/devicetree/bindings/misc/mti,mips-cdmm.txt
create mode 100644 Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
create mode 100644 arch/mips/boot/dts/img/Makefile
create mode 100644 arch/mips/boot/dts/img/boston.dts
create mode 100644 arch/mips/configs/generic/32r1.config
create mode 100644 arch/mips/configs/generic/32r2.config
create mode 100644 arch/mips/configs/generic/32r6.config
create mode 100644 arch/mips/configs/generic/64r1.config
create mode 100644 arch/mips/configs/generic/64r2.config
create mode 100644 arch/mips/configs/generic/64r6.config
create mode 100644 arch/mips/configs/generic/board-boston.config
create mode 100644 arch/mips/configs/generic/board-sead-3.config
create mode 100644 arch/mips/configs/generic/eb.config
create mode 100644 arch/mips/configs/generic/el.config
create mode 100644 arch/mips/configs/generic/micro32r2.config
create mode 100644 arch/mips/configs/generic_defconfig
delete mode 100644 arch/mips/configs/sead3_defconfig
delete mode 100644 arch/mips/configs/sead3micro_defconfig
create mode 100644 arch/mips/generic/Kconfig
create mode 100644 arch/mips/generic/Makefile
create mode 100644 arch/mips/generic/Platform
rename arch/mips/{mti-sead3/sead3-dtshim.c => generic/board-sead3.c} (72%)
create mode 100644 arch/mips/generic/init.c
create mode 100644 arch/mips/generic/irq.c
create mode 100644 arch/mips/generic/proc.c
create mode 100644 arch/mips/generic/vmlinux.its.S
delete mode 100644 arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
delete mode 100644 arch/mips/include/asm/mach-sead3/irq.h
delete mode 100644 arch/mips/include/asm/mach-sead3/kernel-entry-init.h
delete mode 100644 arch/mips/include/asm/mach-sead3/sead3-dtshim.h
delete mode 100644 arch/mips/include/asm/mach-sead3/war.h
create mode 100644 arch/mips/include/asm/machine.h
delete mode 100644 arch/mips/mti-sead3/Makefile
delete mode 100644 arch/mips/mti-sead3/Platform
delete mode 100644 arch/mips/mti-sead3/sead3-init.c
delete mode 100644 arch/mips/mti-sead3/sead3-int.c
delete mode 100644 arch/mips/mti-sead3/sead3-setup.c
delete mode 100644 arch/mips/mti-sead3/sead3-time.c
create mode 100644 arch/mips/pci/pci-generic.c
create mode 100644 arch/mips/pci/pci-legacy.c
create mode 100644 drivers/clk/imgtec/Kconfig
create mode 100644 drivers/clk/imgtec/Makefile
create mode 100644 drivers/clk/imgtec/clk-boston.c
create mode 100644 include/dt-bindings/clock/boston-clock.h
--
2.9.3
^ permalink raw reply [flat|nested] 58+ messages in thread* [PATCH v2 01/26] MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Lorenzo Pieralisi, Bjorn Helgaas, linux-kernel,
Sergey Ryazanov, Yinghai Lu, Will Deacon
Introduce support for CONFIG_PCI_DOMAINS_GENERIC, allowing for platforms
to make use of generic PCI domains instead of the MIPS-specific
implementation. The set_pci_need_domain_info function is introduced to
abstract away the removed need_domain_info field in struct
pci_controller, and pcibios_scanbus is adjusted to use the pci_domain_nr
accessor instead of directly accessing the index field.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/Kconfig | 3 +++
arch/mips/include/asm/pci.h | 21 ++++++++++++++++++++-
arch/mips/pci/pci.c | 4 ++--
3 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 45bbddf..88c0c0d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2980,6 +2980,9 @@ config HT_PCI
config PCI_DOMAINS
bool
+config PCI_DOMAINS_GENERIC
+ bool
+
source "drivers/pci/Kconfig"
#
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 547e113..0564692 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -39,10 +39,12 @@ struct pci_controller {
struct resource *busn_resource;
unsigned long busn_offset;
+#ifndef CONFIG_PCI_DOMAINS_GENERIC
unsigned int index;
/* For compatibility with current (as of July 2003) pciutils
and XFree86. Eventually will be removed. */
unsigned int need_domain_info;
+#endif
/* Optional access methods for reading/writing the bus number
of the PCI controller */
@@ -101,7 +103,18 @@ struct pci_dev;
*/
#define PCI_DMA_BUS_IS_PHYS (1)
-#ifdef CONFIG_PCI_DOMAINS
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+ return pci_domain_nr(bus);
+}
+
+static inline void set_pci_need_domain_info(struct pci_controller *hose,
+ int need_domain_info)
+{
+ /* nothing to do */
+}
+#elif defined(CONFIG_PCI_DOMAINS)
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
static inline int pci_proc_domain(struct pci_bus *bus)
@@ -109,6 +122,12 @@ static inline int pci_proc_domain(struct pci_bus *bus)
struct pci_controller *hose = bus->sysdata;
return hose->need_domain_info;
}
+
+static inline void set_pci_need_domain_info(struct pci_controller *hose,
+ int need_domain_info)
+{
+ hose->need_domain_info = need_domain_info;
+}
#endif /* CONFIG_PCI_DOMAINS */
#endif /* __KERNEL__ */
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 644ae96..5207c04 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -95,8 +95,8 @@ static void pcibios_scanbus(struct pci_controller *hose)
&resources);
hose->bus = bus;
- need_domain_info = need_domain_info || hose->index;
- hose->need_domain_info = need_domain_info;
+ need_domain_info = need_domain_info || pci_domain_nr(bus);
+ set_pci_need_domain_info(hose, need_domain_info);
if (!bus) {
pci_free_resource_list(&resources);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 01/26] MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Lorenzo Pieralisi, Bjorn Helgaas, linux-kernel,
Sergey Ryazanov, Yinghai Lu, Will Deacon
Introduce support for CONFIG_PCI_DOMAINS_GENERIC, allowing for platforms
to make use of generic PCI domains instead of the MIPS-specific
implementation. The set_pci_need_domain_info function is introduced to
abstract away the removed need_domain_info field in struct
pci_controller, and pcibios_scanbus is adjusted to use the pci_domain_nr
accessor instead of directly accessing the index field.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/Kconfig | 3 +++
arch/mips/include/asm/pci.h | 21 ++++++++++++++++++++-
arch/mips/pci/pci.c | 4 ++--
3 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 45bbddf..88c0c0d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2980,6 +2980,9 @@ config HT_PCI
config PCI_DOMAINS
bool
+config PCI_DOMAINS_GENERIC
+ bool
+
source "drivers/pci/Kconfig"
#
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 547e113..0564692 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -39,10 +39,12 @@ struct pci_controller {
struct resource *busn_resource;
unsigned long busn_offset;
+#ifndef CONFIG_PCI_DOMAINS_GENERIC
unsigned int index;
/* For compatibility with current (as of July 2003) pciutils
and XFree86. Eventually will be removed. */
unsigned int need_domain_info;
+#endif
/* Optional access methods for reading/writing the bus number
of the PCI controller */
@@ -101,7 +103,18 @@ struct pci_dev;
*/
#define PCI_DMA_BUS_IS_PHYS (1)
-#ifdef CONFIG_PCI_DOMAINS
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+ return pci_domain_nr(bus);
+}
+
+static inline void set_pci_need_domain_info(struct pci_controller *hose,
+ int need_domain_info)
+{
+ /* nothing to do */
+}
+#elif defined(CONFIG_PCI_DOMAINS)
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
static inline int pci_proc_domain(struct pci_bus *bus)
@@ -109,6 +122,12 @@ static inline int pci_proc_domain(struct pci_bus *bus)
struct pci_controller *hose = bus->sysdata;
return hose->need_domain_info;
}
+
+static inline void set_pci_need_domain_info(struct pci_controller *hose,
+ int need_domain_info)
+{
+ hose->need_domain_info = need_domain_info;
+}
#endif /* CONFIG_PCI_DOMAINS */
#endif /* __KERNEL__ */
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 644ae96..5207c04 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -95,8 +95,8 @@ static void pcibios_scanbus(struct pci_controller *hose)
&resources);
hose->bus = bus;
- need_domain_info = need_domain_info || hose->index;
- hose->need_domain_info = need_domain_info;
+ need_domain_info = need_domain_info || pci_domain_nr(bus);
+ set_pci_need_domain_info(hose, need_domain_info);
if (!bus) {
pci_free_resource_list(&resources);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 02/26] MIPS: PCI: Make pcibios_set_cache_line_size an initcall
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Lorenzo Pieralisi, Bjorn Helgaas, linux-kernel,
Sergey Ryazanov, Yinghai Lu
In preparation for allowing configurations in which pcibios_init is not
included, make pcibios_set_cache_line_size an initcall. arch_initcall is
used such that it runs before the pcibios_init subsys_initcall for
platforms that continue to use it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/pci/pci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 5207c04..30320a4 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -220,7 +220,7 @@ out:
"Skipping PCI bus scan due to resource conflict\n");
}
-static void __init pcibios_set_cache_line_size(void)
+static int __init pcibios_set_cache_line_size(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
unsigned int lsize;
@@ -238,14 +238,14 @@ static void __init pcibios_set_cache_line_size(void)
pci_dfl_cache_line_size = lsize >> 2;
pr_debug("PCI: pci_cache_line_size set to %d bytes\n", lsize);
+ return 0;
}
+arch_initcall(pcibios_set_cache_line_size);
static int __init pcibios_init(void)
{
struct pci_controller *hose;
- pcibios_set_cache_line_size();
-
/* Scan all of the recorded PCI controllers. */
list_for_each_entry(hose, &controllers, list)
pcibios_scanbus(hose);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 02/26] MIPS: PCI: Make pcibios_set_cache_line_size an initcall
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Lorenzo Pieralisi, Bjorn Helgaas, linux-kernel,
Sergey Ryazanov, Yinghai Lu
In preparation for allowing configurations in which pcibios_init is not
included, make pcibios_set_cache_line_size an initcall. arch_initcall is
used such that it runs before the pcibios_init subsys_initcall for
platforms that continue to use it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/pci/pci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 5207c04..30320a4 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -220,7 +220,7 @@ out:
"Skipping PCI bus scan due to resource conflict\n");
}
-static void __init pcibios_set_cache_line_size(void)
+static int __init pcibios_set_cache_line_size(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
unsigned int lsize;
@@ -238,14 +238,14 @@ static void __init pcibios_set_cache_line_size(void)
pci_dfl_cache_line_size = lsize >> 2;
pr_debug("PCI: pci_cache_line_size set to %d bytes\n", lsize);
+ return 0;
}
+arch_initcall(pcibios_set_cache_line_size);
static int __init pcibios_init(void)
{
struct pci_controller *hose;
- pcibios_set_cache_line_size();
-
/* Scan all of the recorded PCI controllers. */
list_for_each_entry(hose, &controllers, list)
pcibios_scanbus(hose);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 03/26] MIPS: PCI: Inline pcibios_assign_all_busses
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Lorenzo Pieralisi, Bjorn Helgaas, linux-kernel,
Sergey Ryazanov, Yinghai Lu, Will Deacon
The MIPS implementation of pcibios_assign_all_busses trivially returns
1. Implement it as a static function in asm/pci.h such that the compiler
can inline it & optimise out never-taken paths.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/include/asm/pci.h | 6 ++++--
arch/mips/pci/pci.c | 5 -----
2 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 0564692..acc651e 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -66,8 +66,10 @@ extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
or architectures with incomplete PCI setup by the loader */
-
-extern unsigned int pcibios_assign_all_busses(void);
+static inline unsigned int pcibios_assign_all_busses(void)
+{
+ return 1;
+}
extern unsigned long PCIBIOS_MIN_IO;
extern unsigned long PCIBIOS_MIN_MEM;
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 30320a4..8cc6ea4 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -297,11 +297,6 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
return 0;
}
-unsigned int pcibios_assign_all_busses(void)
-{
- return 1;
-}
-
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
int err;
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 03/26] MIPS: PCI: Inline pcibios_assign_all_busses
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Lorenzo Pieralisi, Bjorn Helgaas, linux-kernel,
Sergey Ryazanov, Yinghai Lu, Will Deacon
The MIPS implementation of pcibios_assign_all_busses trivially returns
1. Implement it as a static function in asm/pci.h such that the compiler
can inline it & optimise out never-taken paths.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/include/asm/pci.h | 6 ++++--
arch/mips/pci/pci.c | 5 -----
2 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 0564692..acc651e 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -66,8 +66,10 @@ extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
or architectures with incomplete PCI setup by the loader */
-
-extern unsigned int pcibios_assign_all_busses(void);
+static inline unsigned int pcibios_assign_all_busses(void)
+{
+ return 1;
+}
extern unsigned long PCIBIOS_MIN_IO;
extern unsigned long PCIBIOS_MIN_MEM;
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 30320a4..8cc6ea4 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -297,11 +297,6 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
return 0;
}
-unsigned int pcibios_assign_all_busses(void)
-{
- return 1;
-}
-
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
int err;
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 04/26] MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Lorenzo Pieralisi, Bjorn Helgaas, linux-kernel,
John Crispin, Sergey Ryazanov, Yinghai Lu
Split out the parts of pci.c that are used by existing systems with
MIPS-style PCI drivers but that will not be used by systems with more
generic PCI drivers such as pcie-xilinx. This is done in preparation for
allowing configurations where the code moved to pci-legacy.c is not
built.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/pci/Makefile | 1 +
arch/mips/pci/pci-legacy.c | 302 +++++++++++++++++++++++++++++++++++++++++++++
arch/mips/pci/pci.c | 287 +-----------------------------------------
3 files changed, 306 insertions(+), 284 deletions(-)
create mode 100644 arch/mips/pci/pci-legacy.c
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 139ad1d..5666637 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -3,6 +3,7 @@
#
obj-y += pci.o
+obj-y += pci-legacy.o
#
# PCI bus host bridge specific code
diff --git a/arch/mips/pci/pci-legacy.c b/arch/mips/pci/pci-legacy.c
new file mode 100644
index 0000000..014649b
--- /dev/null
+++ b/arch/mips/pci/pci-legacy.c
@@ -0,0 +1,302 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2003, 04, 11 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2011 Wind River Systems,
+ * written by Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/of_address.h>
+
+#include <asm/cpu-info.h>
+
+/*
+ * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
+ * assignments.
+ */
+
+/*
+ * The PCI controller list.
+ */
+static LIST_HEAD(controllers);
+
+static int pci_initialized;
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ struct pci_dev *dev = data;
+ struct pci_controller *hose = dev->sysdata;
+ resource_size_t start = res->start;
+
+ if (res->flags & IORESOURCE_IO) {
+ /* Make sure we start at our min on all hoses */
+ if (start < PCIBIOS_MIN_IO + hose->io_resource->start)
+ start = PCIBIOS_MIN_IO + hose->io_resource->start;
+
+ /*
+ * Put everything into 0x00-0xff region modulo 0x400
+ */
+ if (start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
+ } else if (res->flags & IORESOURCE_MEM) {
+ /* Make sure we start at our min on all hoses */
+ if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
+ start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
+ }
+
+ return start;
+}
+
+static void pcibios_scanbus(struct pci_controller *hose)
+{
+ static int next_busno;
+ static int need_domain_info;
+ LIST_HEAD(resources);
+ struct pci_bus *bus;
+
+ if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY))
+ next_busno = (*hose->get_busno)();
+
+ pci_add_resource_offset(&resources,
+ hose->mem_resource, hose->mem_offset);
+ pci_add_resource_offset(&resources,
+ hose->io_resource, hose->io_offset);
+ pci_add_resource_offset(&resources,
+ hose->busn_resource, hose->busn_offset);
+ bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
+ &resources);
+ hose->bus = bus;
+
+ need_domain_info = need_domain_info || pci_domain_nr(bus);
+ set_pci_need_domain_info(hose, need_domain_info);
+
+ if (!bus) {
+ pci_free_resource_list(&resources);
+ return;
+ }
+
+ next_busno = bus->busn_res.end + 1;
+ /* Don't allow 8-bit bus number overflow inside the hose -
+ reserve some space for bridges. */
+ if (next_busno > 224) {
+ next_busno = 0;
+ need_domain_info = 1;
+ }
+
+ /*
+ * We insert PCI resources into the iomem_resource and
+ * ioport_resource trees in either pci_bus_claim_resources()
+ * or pci_bus_assign_resources().
+ */
+ if (pci_has_flag(PCI_PROBE_ONLY)) {
+ pci_bus_claim_resources(bus);
+ } else {
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+ }
+ pci_bus_add_devices(bus);
+}
+
+#ifdef CONFIG_OF
+void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
+{
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
+
+ pr_info("PCI host bridge %s ranges:\n", node->full_name);
+ hose->of_node = node;
+
+ if (of_pci_range_parser_init(&parser, node))
+ return;
+
+ for_each_of_pci_range(&parser, &range) {
+ struct resource *res = NULL;
+
+ switch (range.flags & IORESOURCE_TYPE_BITS) {
+ case IORESOURCE_IO:
+ pr_info(" IO 0x%016llx..0x%016llx\n",
+ range.cpu_addr,
+ range.cpu_addr + range.size - 1);
+ hose->io_map_base =
+ (unsigned long)ioremap(range.cpu_addr,
+ range.size);
+ res = hose->io_resource;
+ break;
+ case IORESOURCE_MEM:
+ pr_info(" MEM 0x%016llx..0x%016llx\n",
+ range.cpu_addr,
+ range.cpu_addr + range.size - 1);
+ res = hose->mem_resource;
+ break;
+ }
+ if (res != NULL)
+ of_pci_range_to_resource(&range, node, res);
+ }
+}
+
+struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
+{
+ struct pci_controller *hose = bus->sysdata;
+
+ return of_node_get(hose->of_node);
+}
+#endif
+
+static DEFINE_MUTEX(pci_scan_mutex);
+
+void register_pci_controller(struct pci_controller *hose)
+{
+ struct resource *parent;
+
+ parent = hose->mem_resource->parent;
+ if (!parent)
+ parent = &iomem_resource;
+
+ if (request_resource(parent, hose->mem_resource) < 0)
+ goto out;
+
+ parent = hose->io_resource->parent;
+ if (!parent)
+ parent = &ioport_resource;
+
+ if (request_resource(parent, hose->io_resource) < 0) {
+ release_resource(hose->mem_resource);
+ goto out;
+ }
+
+ INIT_LIST_HEAD(&hose->list);
+ list_add(&hose->list, &controllers);
+
+ /*
+ * Do not panic here but later - this might happen before console init.
+ */
+ if (!hose->io_map_base) {
+ printk(KERN_WARNING
+ "registering PCI controller with io_map_base unset\n");
+ }
+
+ /*
+ * Scan the bus if it is register after the PCI subsystem
+ * initialization.
+ */
+ if (pci_initialized) {
+ mutex_lock(&pci_scan_mutex);
+ pcibios_scanbus(hose);
+ mutex_unlock(&pci_scan_mutex);
+ }
+
+ return;
+
+out:
+ printk(KERN_WARNING
+ "Skipping PCI bus scan due to resource conflict\n");
+}
+
+static int __init pcibios_init(void)
+{
+ struct pci_controller *hose;
+
+ /* Scan all of the recorded PCI controllers. */
+ list_for_each_entry(hose, &controllers, list)
+ pcibios_scanbus(hose);
+
+ pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq);
+
+ pci_initialized = 1;
+
+ return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+static int pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1<<idx)))
+ continue;
+
+ r = &dev->resource[idx];
+ if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+ continue;
+ if ((idx == PCI_ROM_RESOURCE) &&
+ (!(r->flags & IORESOURCE_ROM_ENABLE)))
+ continue;
+ if (!r->start && r->end) {
+ printk(KERN_ERR "PCI: Device %s not available "
+ "because of resource collisions\n",
+ pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+ if (cmd != old_cmd) {
+ printk("PCI: Enabling device %s (%04x -> %04x)\n",
+ pci_name(dev), old_cmd, cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ return 0;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ int err;
+
+ if ((err = pcibios_enable_resources(dev, mask)) < 0)
+ return err;
+
+ return pcibios_plat_dev_init(dev);
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev = bus->self;
+
+ if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
+ (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ pci_read_bridge_bases(bus);
+ }
+}
+
+char * (*pcibios_plat_setup)(char *str) __initdata;
+
+char *__init pcibios_setup(char *str)
+{
+ if (pcibios_plat_setup)
+ return pcibios_plat_setup(str);
+ return str;
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 8cc6ea4..f6325fa 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -20,205 +20,11 @@
#include <asm/cpu-info.h>
-/*
- * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
- * assignments.
- */
-
-/*
- * The PCI controller list.
- */
-static LIST_HEAD(controllers);
-
unsigned long PCIBIOS_MIN_IO;
-unsigned long PCIBIOS_MIN_MEM;
-
-static int pci_initialized;
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might have be mirrored at 0x0100-0x03ff..
- */
-resource_size_t
-pcibios_align_resource(void *data, const struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- struct pci_dev *dev = data;
- struct pci_controller *hose = dev->sysdata;
- resource_size_t start = res->start;
-
- if (res->flags & IORESOURCE_IO) {
- /* Make sure we start at our min on all hoses */
- if (start < PCIBIOS_MIN_IO + hose->io_resource->start)
- start = PCIBIOS_MIN_IO + hose->io_resource->start;
-
- /*
- * Put everything into 0x00-0xff region modulo 0x400
- */
- if (start & 0x300)
- start = (start + 0x3ff) & ~0x3ff;
- } else if (res->flags & IORESOURCE_MEM) {
- /* Make sure we start at our min on all hoses */
- if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
- start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
- }
-
- return start;
-}
-
-static void pcibios_scanbus(struct pci_controller *hose)
-{
- static int next_busno;
- static int need_domain_info;
- LIST_HEAD(resources);
- struct pci_bus *bus;
-
- if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY))
- next_busno = (*hose->get_busno)();
-
- pci_add_resource_offset(&resources,
- hose->mem_resource, hose->mem_offset);
- pci_add_resource_offset(&resources,
- hose->io_resource, hose->io_offset);
- pci_add_resource_offset(&resources,
- hose->busn_resource, hose->busn_offset);
- bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
- &resources);
- hose->bus = bus;
-
- need_domain_info = need_domain_info || pci_domain_nr(bus);
- set_pci_need_domain_info(hose, need_domain_info);
-
- if (!bus) {
- pci_free_resource_list(&resources);
- return;
- }
-
- next_busno = bus->busn_res.end + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
- }
-
- /*
- * We insert PCI resources into the iomem_resource and
- * ioport_resource trees in either pci_bus_claim_resources()
- * or pci_bus_assign_resources().
- */
- if (pci_has_flag(PCI_PROBE_ONLY)) {
- pci_bus_claim_resources(bus);
- } else {
- pci_bus_size_bridges(bus);
- pci_bus_assign_resources(bus);
- }
- pci_bus_add_devices(bus);
-}
-
-#ifdef CONFIG_OF
-void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
-{
- struct of_pci_range range;
- struct of_pci_range_parser parser;
-
- pr_info("PCI host bridge %s ranges:\n", node->full_name);
- hose->of_node = node;
-
- if (of_pci_range_parser_init(&parser, node))
- return;
-
- for_each_of_pci_range(&parser, &range) {
- struct resource *res = NULL;
-
- switch (range.flags & IORESOURCE_TYPE_BITS) {
- case IORESOURCE_IO:
- pr_info(" IO 0x%016llx..0x%016llx\n",
- range.cpu_addr,
- range.cpu_addr + range.size - 1);
- hose->io_map_base =
- (unsigned long)ioremap(range.cpu_addr,
- range.size);
- res = hose->io_resource;
- break;
- case IORESOURCE_MEM:
- pr_info(" MEM 0x%016llx..0x%016llx\n",
- range.cpu_addr,
- range.cpu_addr + range.size - 1);
- res = hose->mem_resource;
- break;
- }
- if (res != NULL)
- of_pci_range_to_resource(&range, node, res);
- }
-}
-
-struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
-{
- struct pci_controller *hose = bus->sysdata;
-
- return of_node_get(hose->of_node);
-}
-#endif
-
-static DEFINE_MUTEX(pci_scan_mutex);
-
-void register_pci_controller(struct pci_controller *hose)
-{
- struct resource *parent;
-
- parent = hose->mem_resource->parent;
- if (!parent)
- parent = &iomem_resource;
-
- if (request_resource(parent, hose->mem_resource) < 0)
- goto out;
-
- parent = hose->io_resource->parent;
- if (!parent)
- parent = &ioport_resource;
-
- if (request_resource(parent, hose->io_resource) < 0) {
- release_resource(hose->mem_resource);
- goto out;
- }
-
- INIT_LIST_HEAD(&hose->list);
- list_add(&hose->list, &controllers);
-
- /*
- * Do not panic here but later - this might happen before console init.
- */
- if (!hose->io_map_base) {
- printk(KERN_WARNING
- "registering PCI controller with io_map_base unset\n");
- }
-
- /*
- * Scan the bus if it is register after the PCI subsystem
- * initialization.
- */
- if (pci_initialized) {
- mutex_lock(&pci_scan_mutex);
- pcibios_scanbus(hose);
- mutex_unlock(&pci_scan_mutex);
- }
-
- return;
+EXPORT_SYMBOL(PCIBIOS_MIN_IO);
-out:
- printk(KERN_WARNING
- "Skipping PCI bus scan due to resource conflict\n");
-}
+unsigned long PCIBIOS_MIN_MEM;
+EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
static int __init pcibios_set_cache_line_size(void)
{
@@ -242,84 +48,6 @@ static int __init pcibios_set_cache_line_size(void)
}
arch_initcall(pcibios_set_cache_line_size);
-static int __init pcibios_init(void)
-{
- struct pci_controller *hose;
-
- /* Scan all of the recorded PCI controllers. */
- list_for_each_entry(hose, &controllers, list)
- pcibios_scanbus(hose);
-
- pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq);
-
- pci_initialized = 1;
-
- return 0;
-}
-
-subsys_initcall(pcibios_init);
-
-static int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1<<idx)))
- continue;
-
- r = &dev->resource[idx];
- if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
- continue;
- if ((idx == PCI_ROM_RESOURCE) &&
- (!(r->flags & IORESOURCE_ROM_ENABLE)))
- continue;
- if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available "
- "because of resource collisions\n",
- pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
- if (cmd != old_cmd) {
- printk("PCI: Enabling device %s (%04x -> %04x)\n",
- pci_name(dev), old_cmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
-}
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
- int err;
-
- if ((err = pcibios_enable_resources(dev, mask)) < 0)
- return err;
-
- return pcibios_plat_dev_init(dev);
-}
-
-void pcibios_fixup_bus(struct pci_bus *bus)
-{
- struct pci_dev *dev = bus->self;
-
- if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
- (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
- pci_read_bridge_bases(bus);
- }
-}
-
-EXPORT_SYMBOL(PCIBIOS_MIN_IO);
-EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
-
void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc, resource_size_t *start,
resource_size_t *end)
@@ -353,12 +81,3 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start, vma->vm_page_prot);
}
-
-char * (*pcibios_plat_setup)(char *str) __initdata;
-
-char *__init pcibios_setup(char *str)
-{
- if (pcibios_plat_setup)
- return pcibios_plat_setup(str);
- return str;
-}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 04/26] MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Lorenzo Pieralisi, Bjorn Helgaas, linux-kernel,
John Crispin, Sergey Ryazanov, Yinghai Lu
Split out the parts of pci.c that are used by existing systems with
MIPS-style PCI drivers but that will not be used by systems with more
generic PCI drivers such as pcie-xilinx. This is done in preparation for
allowing configurations where the code moved to pci-legacy.c is not
built.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/pci/Makefile | 1 +
arch/mips/pci/pci-legacy.c | 302 +++++++++++++++++++++++++++++++++++++++++++++
arch/mips/pci/pci.c | 287 +-----------------------------------------
3 files changed, 306 insertions(+), 284 deletions(-)
create mode 100644 arch/mips/pci/pci-legacy.c
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 139ad1d..5666637 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -3,6 +3,7 @@
#
obj-y += pci.o
+obj-y += pci-legacy.o
#
# PCI bus host bridge specific code
diff --git a/arch/mips/pci/pci-legacy.c b/arch/mips/pci/pci-legacy.c
new file mode 100644
index 0000000..014649b
--- /dev/null
+++ b/arch/mips/pci/pci-legacy.c
@@ -0,0 +1,302 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2003, 04, 11 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2011 Wind River Systems,
+ * written by Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/of_address.h>
+
+#include <asm/cpu-info.h>
+
+/*
+ * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
+ * assignments.
+ */
+
+/*
+ * The PCI controller list.
+ */
+static LIST_HEAD(controllers);
+
+static int pci_initialized;
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ struct pci_dev *dev = data;
+ struct pci_controller *hose = dev->sysdata;
+ resource_size_t start = res->start;
+
+ if (res->flags & IORESOURCE_IO) {
+ /* Make sure we start at our min on all hoses */
+ if (start < PCIBIOS_MIN_IO + hose->io_resource->start)
+ start = PCIBIOS_MIN_IO + hose->io_resource->start;
+
+ /*
+ * Put everything into 0x00-0xff region modulo 0x400
+ */
+ if (start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
+ } else if (res->flags & IORESOURCE_MEM) {
+ /* Make sure we start at our min on all hoses */
+ if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
+ start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
+ }
+
+ return start;
+}
+
+static void pcibios_scanbus(struct pci_controller *hose)
+{
+ static int next_busno;
+ static int need_domain_info;
+ LIST_HEAD(resources);
+ struct pci_bus *bus;
+
+ if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY))
+ next_busno = (*hose->get_busno)();
+
+ pci_add_resource_offset(&resources,
+ hose->mem_resource, hose->mem_offset);
+ pci_add_resource_offset(&resources,
+ hose->io_resource, hose->io_offset);
+ pci_add_resource_offset(&resources,
+ hose->busn_resource, hose->busn_offset);
+ bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
+ &resources);
+ hose->bus = bus;
+
+ need_domain_info = need_domain_info || pci_domain_nr(bus);
+ set_pci_need_domain_info(hose, need_domain_info);
+
+ if (!bus) {
+ pci_free_resource_list(&resources);
+ return;
+ }
+
+ next_busno = bus->busn_res.end + 1;
+ /* Don't allow 8-bit bus number overflow inside the hose -
+ reserve some space for bridges. */
+ if (next_busno > 224) {
+ next_busno = 0;
+ need_domain_info = 1;
+ }
+
+ /*
+ * We insert PCI resources into the iomem_resource and
+ * ioport_resource trees in either pci_bus_claim_resources()
+ * or pci_bus_assign_resources().
+ */
+ if (pci_has_flag(PCI_PROBE_ONLY)) {
+ pci_bus_claim_resources(bus);
+ } else {
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+ }
+ pci_bus_add_devices(bus);
+}
+
+#ifdef CONFIG_OF
+void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
+{
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
+
+ pr_info("PCI host bridge %s ranges:\n", node->full_name);
+ hose->of_node = node;
+
+ if (of_pci_range_parser_init(&parser, node))
+ return;
+
+ for_each_of_pci_range(&parser, &range) {
+ struct resource *res = NULL;
+
+ switch (range.flags & IORESOURCE_TYPE_BITS) {
+ case IORESOURCE_IO:
+ pr_info(" IO 0x%016llx..0x%016llx\n",
+ range.cpu_addr,
+ range.cpu_addr + range.size - 1);
+ hose->io_map_base =
+ (unsigned long)ioremap(range.cpu_addr,
+ range.size);
+ res = hose->io_resource;
+ break;
+ case IORESOURCE_MEM:
+ pr_info(" MEM 0x%016llx..0x%016llx\n",
+ range.cpu_addr,
+ range.cpu_addr + range.size - 1);
+ res = hose->mem_resource;
+ break;
+ }
+ if (res != NULL)
+ of_pci_range_to_resource(&range, node, res);
+ }
+}
+
+struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
+{
+ struct pci_controller *hose = bus->sysdata;
+
+ return of_node_get(hose->of_node);
+}
+#endif
+
+static DEFINE_MUTEX(pci_scan_mutex);
+
+void register_pci_controller(struct pci_controller *hose)
+{
+ struct resource *parent;
+
+ parent = hose->mem_resource->parent;
+ if (!parent)
+ parent = &iomem_resource;
+
+ if (request_resource(parent, hose->mem_resource) < 0)
+ goto out;
+
+ parent = hose->io_resource->parent;
+ if (!parent)
+ parent = &ioport_resource;
+
+ if (request_resource(parent, hose->io_resource) < 0) {
+ release_resource(hose->mem_resource);
+ goto out;
+ }
+
+ INIT_LIST_HEAD(&hose->list);
+ list_add(&hose->list, &controllers);
+
+ /*
+ * Do not panic here but later - this might happen before console init.
+ */
+ if (!hose->io_map_base) {
+ printk(KERN_WARNING
+ "registering PCI controller with io_map_base unset\n");
+ }
+
+ /*
+ * Scan the bus if it is register after the PCI subsystem
+ * initialization.
+ */
+ if (pci_initialized) {
+ mutex_lock(&pci_scan_mutex);
+ pcibios_scanbus(hose);
+ mutex_unlock(&pci_scan_mutex);
+ }
+
+ return;
+
+out:
+ printk(KERN_WARNING
+ "Skipping PCI bus scan due to resource conflict\n");
+}
+
+static int __init pcibios_init(void)
+{
+ struct pci_controller *hose;
+
+ /* Scan all of the recorded PCI controllers. */
+ list_for_each_entry(hose, &controllers, list)
+ pcibios_scanbus(hose);
+
+ pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq);
+
+ pci_initialized = 1;
+
+ return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+static int pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1<<idx)))
+ continue;
+
+ r = &dev->resource[idx];
+ if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+ continue;
+ if ((idx == PCI_ROM_RESOURCE) &&
+ (!(r->flags & IORESOURCE_ROM_ENABLE)))
+ continue;
+ if (!r->start && r->end) {
+ printk(KERN_ERR "PCI: Device %s not available "
+ "because of resource collisions\n",
+ pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+ if (cmd != old_cmd) {
+ printk("PCI: Enabling device %s (%04x -> %04x)\n",
+ pci_name(dev), old_cmd, cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ return 0;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ int err;
+
+ if ((err = pcibios_enable_resources(dev, mask)) < 0)
+ return err;
+
+ return pcibios_plat_dev_init(dev);
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev = bus->self;
+
+ if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
+ (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ pci_read_bridge_bases(bus);
+ }
+}
+
+char * (*pcibios_plat_setup)(char *str) __initdata;
+
+char *__init pcibios_setup(char *str)
+{
+ if (pcibios_plat_setup)
+ return pcibios_plat_setup(str);
+ return str;
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 8cc6ea4..f6325fa 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -20,205 +20,11 @@
#include <asm/cpu-info.h>
-/*
- * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
- * assignments.
- */
-
-/*
- * The PCI controller list.
- */
-static LIST_HEAD(controllers);
-
unsigned long PCIBIOS_MIN_IO;
-unsigned long PCIBIOS_MIN_MEM;
-
-static int pci_initialized;
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might have be mirrored at 0x0100-0x03ff..
- */
-resource_size_t
-pcibios_align_resource(void *data, const struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- struct pci_dev *dev = data;
- struct pci_controller *hose = dev->sysdata;
- resource_size_t start = res->start;
-
- if (res->flags & IORESOURCE_IO) {
- /* Make sure we start at our min on all hoses */
- if (start < PCIBIOS_MIN_IO + hose->io_resource->start)
- start = PCIBIOS_MIN_IO + hose->io_resource->start;
-
- /*
- * Put everything into 0x00-0xff region modulo 0x400
- */
- if (start & 0x300)
- start = (start + 0x3ff) & ~0x3ff;
- } else if (res->flags & IORESOURCE_MEM) {
- /* Make sure we start at our min on all hoses */
- if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
- start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
- }
-
- return start;
-}
-
-static void pcibios_scanbus(struct pci_controller *hose)
-{
- static int next_busno;
- static int need_domain_info;
- LIST_HEAD(resources);
- struct pci_bus *bus;
-
- if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY))
- next_busno = (*hose->get_busno)();
-
- pci_add_resource_offset(&resources,
- hose->mem_resource, hose->mem_offset);
- pci_add_resource_offset(&resources,
- hose->io_resource, hose->io_offset);
- pci_add_resource_offset(&resources,
- hose->busn_resource, hose->busn_offset);
- bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
- &resources);
- hose->bus = bus;
-
- need_domain_info = need_domain_info || pci_domain_nr(bus);
- set_pci_need_domain_info(hose, need_domain_info);
-
- if (!bus) {
- pci_free_resource_list(&resources);
- return;
- }
-
- next_busno = bus->busn_res.end + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
- }
-
- /*
- * We insert PCI resources into the iomem_resource and
- * ioport_resource trees in either pci_bus_claim_resources()
- * or pci_bus_assign_resources().
- */
- if (pci_has_flag(PCI_PROBE_ONLY)) {
- pci_bus_claim_resources(bus);
- } else {
- pci_bus_size_bridges(bus);
- pci_bus_assign_resources(bus);
- }
- pci_bus_add_devices(bus);
-}
-
-#ifdef CONFIG_OF
-void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
-{
- struct of_pci_range range;
- struct of_pci_range_parser parser;
-
- pr_info("PCI host bridge %s ranges:\n", node->full_name);
- hose->of_node = node;
-
- if (of_pci_range_parser_init(&parser, node))
- return;
-
- for_each_of_pci_range(&parser, &range) {
- struct resource *res = NULL;
-
- switch (range.flags & IORESOURCE_TYPE_BITS) {
- case IORESOURCE_IO:
- pr_info(" IO 0x%016llx..0x%016llx\n",
- range.cpu_addr,
- range.cpu_addr + range.size - 1);
- hose->io_map_base =
- (unsigned long)ioremap(range.cpu_addr,
- range.size);
- res = hose->io_resource;
- break;
- case IORESOURCE_MEM:
- pr_info(" MEM 0x%016llx..0x%016llx\n",
- range.cpu_addr,
- range.cpu_addr + range.size - 1);
- res = hose->mem_resource;
- break;
- }
- if (res != NULL)
- of_pci_range_to_resource(&range, node, res);
- }
-}
-
-struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
-{
- struct pci_controller *hose = bus->sysdata;
-
- return of_node_get(hose->of_node);
-}
-#endif
-
-static DEFINE_MUTEX(pci_scan_mutex);
-
-void register_pci_controller(struct pci_controller *hose)
-{
- struct resource *parent;
-
- parent = hose->mem_resource->parent;
- if (!parent)
- parent = &iomem_resource;
-
- if (request_resource(parent, hose->mem_resource) < 0)
- goto out;
-
- parent = hose->io_resource->parent;
- if (!parent)
- parent = &ioport_resource;
-
- if (request_resource(parent, hose->io_resource) < 0) {
- release_resource(hose->mem_resource);
- goto out;
- }
-
- INIT_LIST_HEAD(&hose->list);
- list_add(&hose->list, &controllers);
-
- /*
- * Do not panic here but later - this might happen before console init.
- */
- if (!hose->io_map_base) {
- printk(KERN_WARNING
- "registering PCI controller with io_map_base unset\n");
- }
-
- /*
- * Scan the bus if it is register after the PCI subsystem
- * initialization.
- */
- if (pci_initialized) {
- mutex_lock(&pci_scan_mutex);
- pcibios_scanbus(hose);
- mutex_unlock(&pci_scan_mutex);
- }
-
- return;
+EXPORT_SYMBOL(PCIBIOS_MIN_IO);
-out:
- printk(KERN_WARNING
- "Skipping PCI bus scan due to resource conflict\n");
-}
+unsigned long PCIBIOS_MIN_MEM;
+EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
static int __init pcibios_set_cache_line_size(void)
{
@@ -242,84 +48,6 @@ static int __init pcibios_set_cache_line_size(void)
}
arch_initcall(pcibios_set_cache_line_size);
-static int __init pcibios_init(void)
-{
- struct pci_controller *hose;
-
- /* Scan all of the recorded PCI controllers. */
- list_for_each_entry(hose, &controllers, list)
- pcibios_scanbus(hose);
-
- pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq);
-
- pci_initialized = 1;
-
- return 0;
-}
-
-subsys_initcall(pcibios_init);
-
-static int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1<<idx)))
- continue;
-
- r = &dev->resource[idx];
- if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
- continue;
- if ((idx == PCI_ROM_RESOURCE) &&
- (!(r->flags & IORESOURCE_ROM_ENABLE)))
- continue;
- if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available "
- "because of resource collisions\n",
- pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
- if (cmd != old_cmd) {
- printk("PCI: Enabling device %s (%04x -> %04x)\n",
- pci_name(dev), old_cmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
-}
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
- int err;
-
- if ((err = pcibios_enable_resources(dev, mask)) < 0)
- return err;
-
- return pcibios_plat_dev_init(dev);
-}
-
-void pcibios_fixup_bus(struct pci_bus *bus)
-{
- struct pci_dev *dev = bus->self;
-
- if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
- (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
- pci_read_bridge_bases(bus);
- }
-}
-
-EXPORT_SYMBOL(PCIBIOS_MIN_IO);
-EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
-
void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc, resource_size_t *start,
resource_size_t *end)
@@ -353,12 +81,3 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start, vma->vm_page_prot);
}
-
-char * (*pcibios_plat_setup)(char *str) __initdata;
-
-char *__init pcibios_setup(char *str)
-{
- if (pcibios_plat_setup)
- return pcibios_plat_setup(str);
- return str;
-}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 05/26] MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Bjorn Helgaas, linux-kernel, John Crispin,
Sergey Ryazanov, Will Deacon
Introduce 2 Kconfig symbols, CONFIG_PCI_DRIVERS_GENERIC &
CONFIG_PCI_DRIVERS_LEGACY, which indicate whether the system should be
built to for PCI drivers using the MIPS-specific struct pci_controller
API (hereafter "legacy" drivers) or more generic drivers using only
functionality provided by the PCI core (hereafter "generic" drivers).
The Kconfig entries are created such that platforms have to select
CONFIG_PCI_DRIVERS_GENERIC if they wish to use it - that is, the default
is CONFIG_PCI_DRIVERS_LEGACY so that existing platforms need no
modification.
The functions declared in pci.h are rearranged with those provided only
by pci-legacy.c being guarded by an #ifdef CONFIG_PCI_DRIVERS_LEGACY to
ensure they are only used in configurations where they are implemented.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/Kconfig | 8 ++++++-
arch/mips/include/asm/pci.h | 54 ++++++++++++++++++++++++++-------------------
arch/mips/lib/iomap-pci.c | 4 ++++
arch/mips/pci/Makefile | 2 +-
4 files changed, 43 insertions(+), 25 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 88c0c0d..45c7895 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2959,7 +2959,6 @@ config PCI
bool "Support for PCI controller"
depends on HW_HAS_PCI
select PCI_DOMAINS
- select NO_GENERIC_PCI_IOPORT_MAP
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
@@ -2983,6 +2982,13 @@ config PCI_DOMAINS
config PCI_DOMAINS_GENERIC
bool
+config PCI_DRIVERS_GENERIC
+ bool
+
+config PCI_DRIVERS_LEGACY
+ def_bool !PCI_DRIVERS_GENERIC
+ select NO_GENERIC_PCI_IOPORT_MAP
+
source "drivers/pci/Kconfig"
#
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index acc651e..30d1129 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -20,6 +20,8 @@
#include <linux/list.h>
#include <linux/of.h>
+#ifdef CONFIG_PCI_DRIVERS_LEGACY
+
/*
* Each pci channel is a top-level PCI bus seem by CPU. A machine with
* multiple PCI channels may have multiple PCI host controllers or a
@@ -62,6 +64,35 @@ extern void register_pci_controller(struct pci_controller *hose);
*/
extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+/* Do platform specific device initialization at pci_enable_device() time */
+extern int pcibios_plat_dev_init(struct pci_dev *dev);
+
+extern char * (*pcibios_plat_setup)(char *str);
+
+#ifdef CONFIG_OF
+/* this function parses memory ranges from a device node */
+extern void pci_load_of_ranges(struct pci_controller *hose,
+ struct device_node *node);
+#else
+static inline void pci_load_of_ranges(struct pci_controller *hose,
+ struct device_node *node) {}
+#endif
+
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+static inline void set_pci_need_domain_info(struct pci_controller *hose,
+ int need_domain_info)
+{
+ /* nothing to do */
+}
+#elif defined(CONFIG_PCI_DOMAINS)
+static inline void set_pci_need_domain_info(struct pci_controller *hose,
+ int need_domain_info)
+{
+ hose->need_domain_info = need_domain_info;
+}
+#endif /* CONFIG_PCI_DOMAINS */
+
+#endif
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
@@ -110,12 +141,6 @@ static inline int pci_proc_domain(struct pci_bus *bus)
{
return pci_domain_nr(bus);
}
-
-static inline void set_pci_need_domain_info(struct pci_controller *hose,
- int need_domain_info)
-{
- /* nothing to do */
-}
#elif defined(CONFIG_PCI_DOMAINS)
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
@@ -124,12 +149,6 @@ static inline int pci_proc_domain(struct pci_bus *bus)
struct pci_controller *hose = bus->sysdata;
return hose->need_domain_info;
}
-
-static inline void set_pci_need_domain_info(struct pci_controller *hose,
- int need_domain_info)
-{
- hose->need_domain_info = need_domain_info;
-}
#endif /* CONFIG_PCI_DOMAINS */
#endif /* __KERNEL__ */
@@ -143,15 +162,4 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
return channel ? 15 : 14;
}
-extern char * (*pcibios_plat_setup)(char *str);
-
-#ifdef CONFIG_OF
-/* this function parses memory ranges from a device node */
-extern void pci_load_of_ranges(struct pci_controller *hose,
- struct device_node *node);
-#else
-static inline void pci_load_of_ranges(struct pci_controller *hose,
- struct device_node *node) {}
-#endif
-
#endif /* _ASM_PCI_H */
diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c
index fd35daa..9cf279d 100644
--- a/arch/mips/lib/iomap-pci.c
+++ b/arch/mips/lib/iomap-pci.c
@@ -10,6 +10,8 @@
#include <linux/module.h>
#include <asm/io.h>
+#ifdef CONFIG_PCI_DRIVERS_LEGACY
+
void __iomem *__pci_ioport_map(struct pci_dev *dev,
unsigned long port, unsigned int nr)
{
@@ -40,6 +42,8 @@ void __iomem *__pci_ioport_map(struct pci_dev *dev,
return (void __iomem *) (ctrl->io_map_base + port);
}
+#endif /* CONFIG_PCI_DRIVERS_LEGACY */
+
void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
{
iounmap(addr);
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 5666637..8478210 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -3,7 +3,7 @@
#
obj-y += pci.o
-obj-y += pci-legacy.o
+obj-$(CONFIG_PCI_DRIVERS_LEGACY)+= pci-legacy.o
#
# PCI bus host bridge specific code
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 05/26] MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Bjorn Helgaas, linux-kernel, John Crispin,
Sergey Ryazanov, Will Deacon
Introduce 2 Kconfig symbols, CONFIG_PCI_DRIVERS_GENERIC &
CONFIG_PCI_DRIVERS_LEGACY, which indicate whether the system should be
built to for PCI drivers using the MIPS-specific struct pci_controller
API (hereafter "legacy" drivers) or more generic drivers using only
functionality provided by the PCI core (hereafter "generic" drivers).
The Kconfig entries are created such that platforms have to select
CONFIG_PCI_DRIVERS_GENERIC if they wish to use it - that is, the default
is CONFIG_PCI_DRIVERS_LEGACY so that existing platforms need no
modification.
The functions declared in pci.h are rearranged with those provided only
by pci-legacy.c being guarded by an #ifdef CONFIG_PCI_DRIVERS_LEGACY to
ensure they are only used in configurations where they are implemented.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/Kconfig | 8 ++++++-
arch/mips/include/asm/pci.h | 54 ++++++++++++++++++++++++++-------------------
arch/mips/lib/iomap-pci.c | 4 ++++
arch/mips/pci/Makefile | 2 +-
4 files changed, 43 insertions(+), 25 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 88c0c0d..45c7895 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2959,7 +2959,6 @@ config PCI
bool "Support for PCI controller"
depends on HW_HAS_PCI
select PCI_DOMAINS
- select NO_GENERIC_PCI_IOPORT_MAP
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
@@ -2983,6 +2982,13 @@ config PCI_DOMAINS
config PCI_DOMAINS_GENERIC
bool
+config PCI_DRIVERS_GENERIC
+ bool
+
+config PCI_DRIVERS_LEGACY
+ def_bool !PCI_DRIVERS_GENERIC
+ select NO_GENERIC_PCI_IOPORT_MAP
+
source "drivers/pci/Kconfig"
#
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index acc651e..30d1129 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -20,6 +20,8 @@
#include <linux/list.h>
#include <linux/of.h>
+#ifdef CONFIG_PCI_DRIVERS_LEGACY
+
/*
* Each pci channel is a top-level PCI bus seem by CPU. A machine with
* multiple PCI channels may have multiple PCI host controllers or a
@@ -62,6 +64,35 @@ extern void register_pci_controller(struct pci_controller *hose);
*/
extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+/* Do platform specific device initialization at pci_enable_device() time */
+extern int pcibios_plat_dev_init(struct pci_dev *dev);
+
+extern char * (*pcibios_plat_setup)(char *str);
+
+#ifdef CONFIG_OF
+/* this function parses memory ranges from a device node */
+extern void pci_load_of_ranges(struct pci_controller *hose,
+ struct device_node *node);
+#else
+static inline void pci_load_of_ranges(struct pci_controller *hose,
+ struct device_node *node) {}
+#endif
+
+#ifdef CONFIG_PCI_DOMAINS_GENERIC
+static inline void set_pci_need_domain_info(struct pci_controller *hose,
+ int need_domain_info)
+{
+ /* nothing to do */
+}
+#elif defined(CONFIG_PCI_DOMAINS)
+static inline void set_pci_need_domain_info(struct pci_controller *hose,
+ int need_domain_info)
+{
+ hose->need_domain_info = need_domain_info;
+}
+#endif /* CONFIG_PCI_DOMAINS */
+
+#endif
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
@@ -110,12 +141,6 @@ static inline int pci_proc_domain(struct pci_bus *bus)
{
return pci_domain_nr(bus);
}
-
-static inline void set_pci_need_domain_info(struct pci_controller *hose,
- int need_domain_info)
-{
- /* nothing to do */
-}
#elif defined(CONFIG_PCI_DOMAINS)
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
@@ -124,12 +149,6 @@ static inline int pci_proc_domain(struct pci_bus *bus)
struct pci_controller *hose = bus->sysdata;
return hose->need_domain_info;
}
-
-static inline void set_pci_need_domain_info(struct pci_controller *hose,
- int need_domain_info)
-{
- hose->need_domain_info = need_domain_info;
-}
#endif /* CONFIG_PCI_DOMAINS */
#endif /* __KERNEL__ */
@@ -143,15 +162,4 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
return channel ? 15 : 14;
}
-extern char * (*pcibios_plat_setup)(char *str);
-
-#ifdef CONFIG_OF
-/* this function parses memory ranges from a device node */
-extern void pci_load_of_ranges(struct pci_controller *hose,
- struct device_node *node);
-#else
-static inline void pci_load_of_ranges(struct pci_controller *hose,
- struct device_node *node) {}
-#endif
-
#endif /* _ASM_PCI_H */
diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c
index fd35daa..9cf279d 100644
--- a/arch/mips/lib/iomap-pci.c
+++ b/arch/mips/lib/iomap-pci.c
@@ -10,6 +10,8 @@
#include <linux/module.h>
#include <asm/io.h>
+#ifdef CONFIG_PCI_DRIVERS_LEGACY
+
void __iomem *__pci_ioport_map(struct pci_dev *dev,
unsigned long port, unsigned int nr)
{
@@ -40,6 +42,8 @@ void __iomem *__pci_ioport_map(struct pci_dev *dev,
return (void __iomem *) (ctrl->io_map_base + port);
}
+#endif /* CONFIG_PCI_DRIVERS_LEGACY */
+
void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
{
iounmap(addr);
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 5666637..8478210 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -3,7 +3,7 @@
#
obj-y += pci.o
-obj-y += pci-legacy.o
+obj-$(CONFIG_PCI_DRIVERS_LEGACY)+= pci-legacy.o
#
# PCI bus host bridge specific code
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 06/26] MIPS: PCI: Support generic drivers
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle; +Cc: Paul Burton, John Crispin, linux-kernel
Introduce support for PCI drivers using only functionality provided
generically by the PCI subsystem, by adding the minimum arch-provided
functions required.
The driver this has been developed for & tested with the xilinx-pcie on
a MIPS Boston development board.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/Kconfig | 1 +
arch/mips/pci/Makefile | 1 +
arch/mips/pci/pci-generic.c | 52 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 54 insertions(+)
create mode 100644 arch/mips/pci/pci-generic.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 45c7895..6c5133f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2983,6 +2983,7 @@ config PCI_DOMAINS_GENERIC
bool
config PCI_DRIVERS_GENERIC
+ select PCI_DOMAINS_GENERIC if PCI_DOMAINS
bool
config PCI_DRIVERS_LEGACY
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 8478210..4b82148 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -4,6 +4,7 @@
obj-y += pci.o
obj-$(CONFIG_PCI_DRIVERS_LEGACY)+= pci-legacy.o
+obj-$(CONFIG_PCI_DRIVERS_GENERIC)+= pci-generic.o
#
# PCI bus host bridge specific code
diff --git a/arch/mips/pci/pci-generic.c b/arch/mips/pci/pci-generic.c
new file mode 100644
index 0000000..dce304d
--- /dev/null
+++ b/arch/mips/pci/pci-generic.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * pcibios_align_resource taken from arch/arm/kernel/bios32.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ struct pci_dev *dev = data;
+ resource_size_t start = res->start;
+ struct pci_host_bridge *host_bridge;
+
+ if (res->flags & IORESOURCE_IO && start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
+
+ start = (start + align - 1) & ~(align - 1);
+
+ host_bridge = pci_find_host_bridge(dev->bus);
+
+ if (host_bridge->align_resource)
+ return host_bridge->align_resource(dev, res,
+ start, size, align);
+
+ return start;
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+ pci_read_bridge_bases(bus);
+}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 06/26] MIPS: PCI: Support generic drivers
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle; +Cc: Paul Burton, John Crispin, linux-kernel
Introduce support for PCI drivers using only functionality provided
generically by the PCI subsystem, by adding the minimum arch-provided
functions required.
The driver this has been developed for & tested with the xilinx-pcie on
a MIPS Boston development board.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/Kconfig | 1 +
arch/mips/pci/Makefile | 1 +
arch/mips/pci/pci-generic.c | 52 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 54 insertions(+)
create mode 100644 arch/mips/pci/pci-generic.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 45c7895..6c5133f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2983,6 +2983,7 @@ config PCI_DOMAINS_GENERIC
bool
config PCI_DRIVERS_GENERIC
+ select PCI_DOMAINS_GENERIC if PCI_DOMAINS
bool
config PCI_DRIVERS_LEGACY
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 8478210..4b82148 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -4,6 +4,7 @@
obj-y += pci.o
obj-$(CONFIG_PCI_DRIVERS_LEGACY)+= pci-legacy.o
+obj-$(CONFIG_PCI_DRIVERS_GENERIC)+= pci-generic.o
#
# PCI bus host bridge specific code
diff --git a/arch/mips/pci/pci-generic.c b/arch/mips/pci/pci-generic.c
new file mode 100644
index 0000000..dce304d
--- /dev/null
+++ b/arch/mips/pci/pci-generic.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * pcibios_align_resource taken from arch/arm/kernel/bios32.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ struct pci_dev *dev = data;
+ resource_size_t start = res->start;
+ struct pci_host_bridge *host_bridge;
+
+ if (res->flags & IORESOURCE_IO && start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
+
+ start = (start + align - 1) & ~(align - 1);
+
+ host_bridge = pci_find_host_bridge(dev->bus);
+
+ if (host_bridge->align_resource)
+ return host_bridge->align_resource(dev, res,
+ start, size, align);
+
+ return start;
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+ pci_read_bridge_bases(bus);
+}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 07/26] MIPS: Sanitise coherentio semantics
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Matt Redfearn, Qais Yousef, Krzysztof Kozlowski,
Masahiro Yamada, Kees Cook, Huacai Chen, linux-kernel,
Hans-Christian Noren Egtvedt, James Hogan, Florian Fainelli,
Alex Smith, Andrew Morton, Max Filippov
The coherentio variable has previously been used as a boolean value,
indicating whether the user specified that coherent I/O should be
enabled or disabled. It failed to take into account the case where the
user does not specify any preference, in which case it makes sense that
we should default to coherent I/O if the hardware supports it
(hw_coherentio is non-zero).
Introduce an enum to clarify the 3 different values of coherentio & use
it throughout the code, modifying plat_device_is_coherent() &
r4k_cache_init() to take into account the default case.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/alchemy/common/setup.c | 6 +++---
arch/mips/include/asm/dma-coherence.h | 12 +++++++++---
arch/mips/include/asm/mach-generic/dma-coherence.h | 10 +++++++++-
arch/mips/mm/c-r4k.c | 3 ++-
arch/mips/mm/dma-default.c | 7 ++++---
arch/mips/mti-malta/malta-setup.c | 4 ++--
arch/mips/pci/pci-alchemy.c | 3 ++-
7 files changed, 31 insertions(+), 14 deletions(-)
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 2902138..7faaa6d 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -48,17 +48,17 @@ void __init plat_mem_setup(void)
clear_c0_config(1 << 19); /* Clear Config[OD] */
hw_coherentio = 0;
- coherentio = 1;
+ coherentio = IO_COHERENCE_ENABLED;
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000:
case ALCHEMY_CPU_AU1500:
case ALCHEMY_CPU_AU1100:
- coherentio = 0;
+ coherentio = IO_COHERENCE_DISABLED;
break;
case ALCHEMY_CPU_AU1200:
/* Au1200 AB USB does not support coherent memory */
if (0 == (read_c0_prid() & PRID_REV_MASK))
- coherentio = 0;
+ coherentio = IO_COHERENCE_DISABLED;
break;
}
diff --git a/arch/mips/include/asm/dma-coherence.h b/arch/mips/include/asm/dma-coherence.h
index bc5e85d..4fbce79 100644
--- a/arch/mips/include/asm/dma-coherence.h
+++ b/arch/mips/include/asm/dma-coherence.h
@@ -9,14 +9,20 @@
#ifndef __ASM_DMA_COHERENCE_H
#define __ASM_DMA_COHERENCE_H
+enum coherent_io_user_state {
+ IO_COHERENCE_DEFAULT,
+ IO_COHERENCE_ENABLED,
+ IO_COHERENCE_DISABLED,
+};
+
#ifdef CONFIG_DMA_MAYBE_COHERENT
-extern int coherentio;
+extern enum coherent_io_user_state coherentio;
extern int hw_coherentio;
#else
#ifdef CONFIG_DMA_COHERENT
-#define coherentio 1
+#define coherentio IO_COHERENCE_ENABLED
#else
-#define coherentio 0
+#define coherentio IO_COHERENCE_DISABLED
#endif
#define hw_coherentio 0
#endif /* CONFIG_DMA_MAYBE_COHERENT */
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
index 0f8a354..8484f82 100644
--- a/arch/mips/include/asm/mach-generic/dma-coherence.h
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -49,7 +49,15 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
static inline int plat_device_is_coherent(struct device *dev)
{
- return coherentio;
+ switch (coherentio) {
+ default:
+ case IO_COHERENCE_DEFAULT:
+ return hw_coherentio;
+ case IO_COHERENCE_ENABLED:
+ return 1;
+ case IO_COHERENCE_DISABLED:
+ return 0;
+ }
}
#ifndef plat_post_dma_flush
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index cd72805..c48deab 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1917,7 +1917,8 @@ void r4k_cache_init(void)
local_flush_icache_range = local_r4k_flush_icache_range;
#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
- if (coherentio) {
+ if ((coherentio == IO_COHERENCE_ENABLED) ||
+ ((coherentio == IO_COHERENCE_DEFAULT) && hw_coherentio)) {
_dma_cache_wback_inv = (void *)cache_noop;
_dma_cache_wback = (void *)cache_noop;
_dma_cache_inv = (void *)cache_noop;
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index b2eadd6..a9c1e94 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -25,13 +25,14 @@
#include <dma-coherence.h>
#ifdef CONFIG_DMA_MAYBE_COHERENT
-int coherentio = 0; /* User defined DMA coherency from command line. */
+/* User defined DMA coherency from command line. */
+enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT;
EXPORT_SYMBOL_GPL(coherentio);
int hw_coherentio = 0; /* Actual hardware supported DMA coherency setting. */
static int __init setcoherentio(char *str)
{
- coherentio = 1;
+ coherentio = IO_COHERENCE_ENABLED;
pr_info("Hardware DMA cache coherency (command line)\n");
return 0;
}
@@ -39,7 +40,7 @@ early_param("coherentio", setcoherentio);
static int __init setnocoherentio(char *str)
{
- coherentio = 0;
+ coherentio = IO_COHERENCE_DISABLED;
pr_info("Software DMA cache coherency (command line)\n");
return 0;
}
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index ec5b216..d7d151f 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -148,12 +148,12 @@ static void __init plat_setup_iocoherency(void)
* coherency instead.
*/
if (plat_enable_iocoherency()) {
- if (coherentio == 0)
+ if (coherentio == IO_COHERENCE_DISABLED)
pr_info("Hardware DMA cache coherency disabled\n");
else
pr_info("Hardware DMA cache coherency enabled\n");
} else {
- if (coherentio == 1)
+ if (coherentio == IO_COHERENCE_ENABLED)
pr_info("Hardware DMA cache coherency unsupported, but enabled from command line!\n");
else
pr_info("Software DMA cache coherency enabled\n");
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index c8994c1..e99ca77 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -429,7 +429,8 @@ static int alchemy_pci_probe(struct platform_device *pdev)
/* Au1500 revisions older than AD have borked coherent PCI */
if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) &&
- (read_c0_prid() < 0x01030202) && !coherentio) {
+ (read_c0_prid() < 0x01030202) &&
+ (coherentio == IO_COHERENCE_DISABLED)) {
val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
val |= PCI_CONFIG_NC;
__raw_writel(val, ctx->regs + PCI_REG_CONFIG);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 07/26] MIPS: Sanitise coherentio semantics
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Matt Redfearn, Qais Yousef, Krzysztof Kozlowski,
Masahiro Yamada, Kees Cook, Huacai Chen, linux-kernel,
Hans-Christian Noren Egtvedt, James Hogan, Florian Fainelli,
Alex Smith, Andrew Morton, Max Filippov
The coherentio variable has previously been used as a boolean value,
indicating whether the user specified that coherent I/O should be
enabled or disabled. It failed to take into account the case where the
user does not specify any preference, in which case it makes sense that
we should default to coherent I/O if the hardware supports it
(hw_coherentio is non-zero).
Introduce an enum to clarify the 3 different values of coherentio & use
it throughout the code, modifying plat_device_is_coherent() &
r4k_cache_init() to take into account the default case.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/alchemy/common/setup.c | 6 +++---
arch/mips/include/asm/dma-coherence.h | 12 +++++++++---
arch/mips/include/asm/mach-generic/dma-coherence.h | 10 +++++++++-
arch/mips/mm/c-r4k.c | 3 ++-
arch/mips/mm/dma-default.c | 7 ++++---
arch/mips/mti-malta/malta-setup.c | 4 ++--
arch/mips/pci/pci-alchemy.c | 3 ++-
7 files changed, 31 insertions(+), 14 deletions(-)
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 2902138..7faaa6d 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -48,17 +48,17 @@ void __init plat_mem_setup(void)
clear_c0_config(1 << 19); /* Clear Config[OD] */
hw_coherentio = 0;
- coherentio = 1;
+ coherentio = IO_COHERENCE_ENABLED;
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000:
case ALCHEMY_CPU_AU1500:
case ALCHEMY_CPU_AU1100:
- coherentio = 0;
+ coherentio = IO_COHERENCE_DISABLED;
break;
case ALCHEMY_CPU_AU1200:
/* Au1200 AB USB does not support coherent memory */
if (0 == (read_c0_prid() & PRID_REV_MASK))
- coherentio = 0;
+ coherentio = IO_COHERENCE_DISABLED;
break;
}
diff --git a/arch/mips/include/asm/dma-coherence.h b/arch/mips/include/asm/dma-coherence.h
index bc5e85d..4fbce79 100644
--- a/arch/mips/include/asm/dma-coherence.h
+++ b/arch/mips/include/asm/dma-coherence.h
@@ -9,14 +9,20 @@
#ifndef __ASM_DMA_COHERENCE_H
#define __ASM_DMA_COHERENCE_H
+enum coherent_io_user_state {
+ IO_COHERENCE_DEFAULT,
+ IO_COHERENCE_ENABLED,
+ IO_COHERENCE_DISABLED,
+};
+
#ifdef CONFIG_DMA_MAYBE_COHERENT
-extern int coherentio;
+extern enum coherent_io_user_state coherentio;
extern int hw_coherentio;
#else
#ifdef CONFIG_DMA_COHERENT
-#define coherentio 1
+#define coherentio IO_COHERENCE_ENABLED
#else
-#define coherentio 0
+#define coherentio IO_COHERENCE_DISABLED
#endif
#define hw_coherentio 0
#endif /* CONFIG_DMA_MAYBE_COHERENT */
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
index 0f8a354..8484f82 100644
--- a/arch/mips/include/asm/mach-generic/dma-coherence.h
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -49,7 +49,15 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
static inline int plat_device_is_coherent(struct device *dev)
{
- return coherentio;
+ switch (coherentio) {
+ default:
+ case IO_COHERENCE_DEFAULT:
+ return hw_coherentio;
+ case IO_COHERENCE_ENABLED:
+ return 1;
+ case IO_COHERENCE_DISABLED:
+ return 0;
+ }
}
#ifndef plat_post_dma_flush
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index cd72805..c48deab 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1917,7 +1917,8 @@ void r4k_cache_init(void)
local_flush_icache_range = local_r4k_flush_icache_range;
#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
- if (coherentio) {
+ if ((coherentio == IO_COHERENCE_ENABLED) ||
+ ((coherentio == IO_COHERENCE_DEFAULT) && hw_coherentio)) {
_dma_cache_wback_inv = (void *)cache_noop;
_dma_cache_wback = (void *)cache_noop;
_dma_cache_inv = (void *)cache_noop;
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index b2eadd6..a9c1e94 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -25,13 +25,14 @@
#include <dma-coherence.h>
#ifdef CONFIG_DMA_MAYBE_COHERENT
-int coherentio = 0; /* User defined DMA coherency from command line. */
+/* User defined DMA coherency from command line. */
+enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT;
EXPORT_SYMBOL_GPL(coherentio);
int hw_coherentio = 0; /* Actual hardware supported DMA coherency setting. */
static int __init setcoherentio(char *str)
{
- coherentio = 1;
+ coherentio = IO_COHERENCE_ENABLED;
pr_info("Hardware DMA cache coherency (command line)\n");
return 0;
}
@@ -39,7 +40,7 @@ early_param("coherentio", setcoherentio);
static int __init setnocoherentio(char *str)
{
- coherentio = 0;
+ coherentio = IO_COHERENCE_DISABLED;
pr_info("Software DMA cache coherency (command line)\n");
return 0;
}
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index ec5b216..d7d151f 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -148,12 +148,12 @@ static void __init plat_setup_iocoherency(void)
* coherency instead.
*/
if (plat_enable_iocoherency()) {
- if (coherentio == 0)
+ if (coherentio == IO_COHERENCE_DISABLED)
pr_info("Hardware DMA cache coherency disabled\n");
else
pr_info("Hardware DMA cache coherency enabled\n");
} else {
- if (coherentio == 1)
+ if (coherentio == IO_COHERENCE_ENABLED)
pr_info("Hardware DMA cache coherency unsupported, but enabled from command line!\n");
else
pr_info("Software DMA cache coherency enabled\n");
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index c8994c1..e99ca77 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -429,7 +429,8 @@ static int alchemy_pci_probe(struct platform_device *pdev)
/* Au1500 revisions older than AD have borked coherent PCI */
if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) &&
- (read_c0_prid() < 0x01030202) && !coherentio) {
+ (read_c0_prid() < 0x01030202) &&
+ (coherentio == IO_COHERENCE_DISABLED)) {
val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
val |= PCI_CONFIG_NC;
__raw_writel(val, ctx->regs + PCI_REG_CONFIG);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 08/26] MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Matt Redfearn, Qais Yousef, linux-kernel,
Robin Murphy, Krzysztof Kozlowski, James Hogan, Andrew Morton,
Alex Smith, Max Filippov
There are no cases where plat_device_is_coherent() will return zero
whilst hw_coherentio is non-zero, and acting any differently in such a
case doesn't make much sense - if a device is non-coherent with the CPU
caches then access to memory "coherent" with DMA must be uncached. Clean
up the nonsensical case.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/mm/dma-default.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index a9c1e94..6540355 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -161,8 +161,7 @@ static void *mips_dma_alloc_coherent(struct device *dev, size_t size,
*dma_handle = plat_map_dma_mem(dev, ret, size);
if (!plat_device_is_coherent(dev)) {
dma_cache_wback_inv((unsigned long) ret, size);
- if (!hw_coherentio)
- ret = UNCAC_ADDR(ret);
+ ret = UNCAC_ADDR(ret);
}
return ret;
@@ -190,7 +189,7 @@ static void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr,
plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL);
- if (!plat_device_is_coherent(dev) && !hw_coherentio)
+ if (!plat_device_is_coherent(dev))
addr = CAC_ADDR(addr);
page = virt_to_page((void *) addr);
@@ -210,7 +209,7 @@ static int mips_dma_mmap(struct device *dev, struct vm_area_struct *vma,
unsigned long pfn;
int ret = -ENXIO;
- if (!plat_device_is_coherent(dev) && !hw_coherentio)
+ if (!plat_device_is_coherent(dev))
addr = CAC_ADDR(addr);
pfn = page_to_pfn(virt_to_page((void *)addr));
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 08/26] MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Matt Redfearn, Qais Yousef, linux-kernel,
Robin Murphy, Krzysztof Kozlowski, James Hogan, Andrew Morton,
Alex Smith, Max Filippov
There are no cases where plat_device_is_coherent() will return zero
whilst hw_coherentio is non-zero, and acting any differently in such a
case doesn't make much sense - if a device is non-coherent with the CPU
caches then access to memory "coherent" with DMA must be uncached. Clean
up the nonsensical case.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/mm/dma-default.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index a9c1e94..6540355 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -161,8 +161,7 @@ static void *mips_dma_alloc_coherent(struct device *dev, size_t size,
*dma_handle = plat_map_dma_mem(dev, ret, size);
if (!plat_device_is_coherent(dev)) {
dma_cache_wback_inv((unsigned long) ret, size);
- if (!hw_coherentio)
- ret = UNCAC_ADDR(ret);
+ ret = UNCAC_ADDR(ret);
}
return ret;
@@ -190,7 +189,7 @@ static void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr,
plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL);
- if (!plat_device_is_coherent(dev) && !hw_coherentio)
+ if (!plat_device_is_coherent(dev))
addr = CAC_ADDR(addr);
page = virt_to_page((void *) addr);
@@ -210,7 +209,7 @@ static int mips_dma_mmap(struct device *dev, struct vm_area_struct *vma,
unsigned long pfn;
int ret = -ENXIO;
- if (!plat_device_is_coherent(dev) && !hw_coherentio)
+ if (!plat_device_is_coherent(dev))
addr = CAC_ADDR(addr);
pfn = page_to_pfn(virt_to_page((void *)addr));
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 09/26] MIPS: Support per-device DMA coherence
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Matt Redfearn, Guenter Roeck, Huacai Chen,
linux-kernel, Robin Murphy, Krzysztof Kozlowski, James Hogan,
Florian Fainelli, Max Filippov, Alex Smith, Andrew Morton,
Valentin Rothberg
On some MIPS systems, a subset of devices may have DMA coherent with CPU
caches. For example in systems including a MIPS I/O Coherence Unit
(IOCU), some devices may be connected to that IOCU whilst others are
not.
Prior to this patch, we have a plat_device_is_coherent() function but no
implementation which does anything besides return a global true or
false, optionally chosen at runtime. For devices such as those described
above this is insufficient.
Fix this by tracking DMA coherence on a per-device basis with a
dma_coherent field in struct dev_archdata. Setting this from
arch_setup_dma_ops() takes care of devices which set the dma-coherent
property via device tree, and any PCI devices beneath a bridge described
in DT, automatically.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/Kconfig | 4 ++++
arch/mips/include/asm/device.h | 5 +++++
arch/mips/include/asm/dma-coherence.h | 4 +++-
arch/mips/include/asm/dma-mapping.h | 10 ++++++++++
arch/mips/include/asm/mach-generic/dma-coherence.h | 4 ++++
arch/mips/mm/c-r4k.c | 4 ++++
arch/mips/mm/dma-default.c | 2 +-
7 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 6c5133f..49eb902 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1097,6 +1097,10 @@ config DMA_MAYBE_COHERENT
select DMA_NONCOHERENT
bool
+config DMA_PERDEV_COHERENT
+ bool
+ select DMA_MAYBE_COHERENT
+
config DMA_COHERENT
bool
diff --git a/arch/mips/include/asm/device.h b/arch/mips/include/asm/device.h
index c94fafb..21c2082 100644
--- a/arch/mips/include/asm/device.h
+++ b/arch/mips/include/asm/device.h
@@ -11,6 +11,11 @@ struct dma_map_ops;
struct dev_archdata {
/* DMA operations on that device */
struct dma_map_ops *dma_ops;
+
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+ /* Non-zero if DMA is coherent with CPU caches */
+ bool dma_coherent;
+#endif
};
struct pdev_archdata {
diff --git a/arch/mips/include/asm/dma-coherence.h b/arch/mips/include/asm/dma-coherence.h
index 4fbce79..72d0eab 100644
--- a/arch/mips/include/asm/dma-coherence.h
+++ b/arch/mips/include/asm/dma-coherence.h
@@ -15,7 +15,9 @@ enum coherent_io_user_state {
IO_COHERENCE_DISABLED,
};
-#ifdef CONFIG_DMA_MAYBE_COHERENT
+#if defined(CONFIG_DMA_PERDEV_COHERENT)
+/* Don't provide (hw_)coherentio to avoid misuse */
+#elif defined(CONFIG_DMA_MAYBE_COHERENT)
extern enum coherent_io_user_state coherentio;
extern int hw_coherentio;
#else
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 12fa79e..7aa71b9 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -32,4 +32,14 @@ static inline void dma_mark_clean(void *addr, size_t size) {}
extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction);
+#define arch_setup_dma_ops arch_setup_dma_ops
+static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base,
+ u64 size, const struct iommu_ops *iommu,
+ bool coherent)
+{
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+ dev->archdata.dma_coherent = coherent;
+#endif
+}
+
#endif /* _ASM_DMA_MAPPING_H */
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
index 8484f82..61addb1 100644
--- a/arch/mips/include/asm/mach-generic/dma-coherence.h
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -49,6 +49,9 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
static inline int plat_device_is_coherent(struct device *dev)
{
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+ return dev->archdata.dma_coherent;
+#else
switch (coherentio) {
default:
case IO_COHERENCE_DEFAULT:
@@ -58,6 +61,7 @@ static inline int plat_device_is_coherent(struct device *dev)
case IO_COHERENCE_DISABLED:
return 0;
}
+#endif
}
#ifndef plat_post_dma_flush
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index c48deab..7529096 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1917,8 +1917,12 @@ void r4k_cache_init(void)
local_flush_icache_range = local_r4k_flush_icache_range;
#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
+# if defined(CONFIG_DMA_PERDEV_COHERENT)
+ if (0) {
+# else
if ((coherentio == IO_COHERENCE_ENABLED) ||
((coherentio == IO_COHERENCE_DEFAULT) && hw_coherentio)) {
+# endif
_dma_cache_wback_inv = (void *)cache_noop;
_dma_cache_wback = (void *)cache_noop;
_dma_cache_inv = (void *)cache_noop;
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 6540355..9f51ee8 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -24,7 +24,7 @@
#include <dma-coherence.h>
-#ifdef CONFIG_DMA_MAYBE_COHERENT
+#if defined(CONFIG_DMA_MAYBE_COHERENT) && !defined(CONFIG_DMA_PERDEV_COHERENT)
/* User defined DMA coherency from command line. */
enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT;
EXPORT_SYMBOL_GPL(coherentio);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 09/26] MIPS: Support per-device DMA coherence
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Matt Redfearn, Guenter Roeck, Huacai Chen,
linux-kernel, Robin Murphy, Krzysztof Kozlowski, James Hogan,
Florian Fainelli, Max Filippov, Alex Smith, Andrew Morton,
Valentin Rothberg
On some MIPS systems, a subset of devices may have DMA coherent with CPU
caches. For example in systems including a MIPS I/O Coherence Unit
(IOCU), some devices may be connected to that IOCU whilst others are
not.
Prior to this patch, we have a plat_device_is_coherent() function but no
implementation which does anything besides return a global true or
false, optionally chosen at runtime. For devices such as those described
above this is insufficient.
Fix this by tracking DMA coherence on a per-device basis with a
dma_coherent field in struct dev_archdata. Setting this from
arch_setup_dma_ops() takes care of devices which set the dma-coherent
property via device tree, and any PCI devices beneath a bridge described
in DT, automatically.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/Kconfig | 4 ++++
arch/mips/include/asm/device.h | 5 +++++
arch/mips/include/asm/dma-coherence.h | 4 +++-
arch/mips/include/asm/dma-mapping.h | 10 ++++++++++
arch/mips/include/asm/mach-generic/dma-coherence.h | 4 ++++
arch/mips/mm/c-r4k.c | 4 ++++
arch/mips/mm/dma-default.c | 2 +-
7 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 6c5133f..49eb902 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1097,6 +1097,10 @@ config DMA_MAYBE_COHERENT
select DMA_NONCOHERENT
bool
+config DMA_PERDEV_COHERENT
+ bool
+ select DMA_MAYBE_COHERENT
+
config DMA_COHERENT
bool
diff --git a/arch/mips/include/asm/device.h b/arch/mips/include/asm/device.h
index c94fafb..21c2082 100644
--- a/arch/mips/include/asm/device.h
+++ b/arch/mips/include/asm/device.h
@@ -11,6 +11,11 @@ struct dma_map_ops;
struct dev_archdata {
/* DMA operations on that device */
struct dma_map_ops *dma_ops;
+
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+ /* Non-zero if DMA is coherent with CPU caches */
+ bool dma_coherent;
+#endif
};
struct pdev_archdata {
diff --git a/arch/mips/include/asm/dma-coherence.h b/arch/mips/include/asm/dma-coherence.h
index 4fbce79..72d0eab 100644
--- a/arch/mips/include/asm/dma-coherence.h
+++ b/arch/mips/include/asm/dma-coherence.h
@@ -15,7 +15,9 @@ enum coherent_io_user_state {
IO_COHERENCE_DISABLED,
};
-#ifdef CONFIG_DMA_MAYBE_COHERENT
+#if defined(CONFIG_DMA_PERDEV_COHERENT)
+/* Don't provide (hw_)coherentio to avoid misuse */
+#elif defined(CONFIG_DMA_MAYBE_COHERENT)
extern enum coherent_io_user_state coherentio;
extern int hw_coherentio;
#else
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 12fa79e..7aa71b9 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -32,4 +32,14 @@ static inline void dma_mark_clean(void *addr, size_t size) {}
extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction);
+#define arch_setup_dma_ops arch_setup_dma_ops
+static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base,
+ u64 size, const struct iommu_ops *iommu,
+ bool coherent)
+{
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+ dev->archdata.dma_coherent = coherent;
+#endif
+}
+
#endif /* _ASM_DMA_MAPPING_H */
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
index 8484f82..61addb1 100644
--- a/arch/mips/include/asm/mach-generic/dma-coherence.h
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -49,6 +49,9 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
static inline int plat_device_is_coherent(struct device *dev)
{
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+ return dev->archdata.dma_coherent;
+#else
switch (coherentio) {
default:
case IO_COHERENCE_DEFAULT:
@@ -58,6 +61,7 @@ static inline int plat_device_is_coherent(struct device *dev)
case IO_COHERENCE_DISABLED:
return 0;
}
+#endif
}
#ifndef plat_post_dma_flush
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index c48deab..7529096 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1917,8 +1917,12 @@ void r4k_cache_init(void)
local_flush_icache_range = local_r4k_flush_icache_range;
#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
+# if defined(CONFIG_DMA_PERDEV_COHERENT)
+ if (0) {
+# else
if ((coherentio == IO_COHERENCE_ENABLED) ||
((coherentio == IO_COHERENCE_DEFAULT) && hw_coherentio)) {
+# endif
_dma_cache_wback_inv = (void *)cache_noop;
_dma_cache_wback = (void *)cache_noop;
_dma_cache_inv = (void *)cache_noop;
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 6540355..9f51ee8 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -24,7 +24,7 @@
#include <dma-coherence.h>
-#ifdef CONFIG_DMA_MAYBE_COHERENT
+#if defined(CONFIG_DMA_MAYBE_COHERENT) && !defined(CONFIG_DMA_PERDEV_COHERENT)
/* User defined DMA coherency from command line. */
enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT;
EXPORT_SYMBOL_GPL(coherentio);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 10/26] MIPS: Print CM error reports upon bus errors
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Matt Redfearn, Maciej W. Rozycki, Masahiro Yamada,
Paolo Bonzini, Kees Cook, linux-kernel, James Hogan,
Andrew Morton, Markos Chandras
If a bus error occurs on a system with a MIPS Coherence Manager (CM)
then the CM may hold useful diagnostic information. Printing this out
has so far been left up to boards, with the requirement that they
register a board_be_handler function & call mips_cm_error_decode() from
there.
In order to avoid boards other than Malta needing to duplicate this
code, call mips_cm_error_decode() automatically if the board registers
no board_be_handler, and remove the Malta implementation of that.
This patch results in no functional change, but removes a further piece
of platform-specific code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/kernel/traps.c | 3 +++
arch/mips/mti-malta/malta-int.c | 15 ---------------
arch/mips/mti-malta/malta-setup.c | 6 ------
3 files changed, 3 insertions(+), 21 deletions(-)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 3de85be..e2c571d 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -48,6 +48,7 @@
#include <asm/fpu.h>
#include <asm/fpu_emulator.h>
#include <asm/idle.h>
+#include <asm/mips-cm.h>
#include <asm/mips-r2-to-r6-emul.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
@@ -444,6 +445,8 @@ asmlinkage void do_be(struct pt_regs *regs)
if (board_be_handler)
action = board_be_handler(regs, fixup != NULL);
+ else
+ mips_cm_error_report();
switch (action) {
case MIPS_BE_DISCARD:
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index c6a6c7a..548130d 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -376,18 +376,3 @@ void __init arch_init_irq(void)
setup_irq(i8259_irq, &i8259irq);
setup_irq(corehi_irq, &corehi_irqaction);
}
-
-void malta_be_init(void)
-{
- /* Could change CM error mask register. */
-}
-
-int malta_be_handler(struct pt_regs *regs, int is_fixup)
-{
- /* This duplicates the handling in do_be which seems wrong */
- int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
-
- mips_cm_error_report();
-
- return retval;
-}
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index d7d151f..2f25930 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -39,9 +39,6 @@
#include <linux/console.h>
#endif
-extern void malta_be_init(void);
-extern int malta_be_handler(struct pt_regs *regs, int is_fixup);
-
static struct resource standard_io_resources[] = {
{
.name = "dma1",
@@ -295,7 +292,4 @@ void __init plat_mem_setup(void)
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
screen_info_setup();
#endif
-
- board_be_init = malta_be_init;
- board_be_handler = malta_be_handler;
}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 10/26] MIPS: Print CM error reports upon bus errors
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Matt Redfearn, Maciej W. Rozycki, Masahiro Yamada,
Paolo Bonzini, Kees Cook, linux-kernel, James Hogan,
Andrew Morton, Markos Chandras
If a bus error occurs on a system with a MIPS Coherence Manager (CM)
then the CM may hold useful diagnostic information. Printing this out
has so far been left up to boards, with the requirement that they
register a board_be_handler function & call mips_cm_error_decode() from
there.
In order to avoid boards other than Malta needing to duplicate this
code, call mips_cm_error_decode() automatically if the board registers
no board_be_handler, and remove the Malta implementation of that.
This patch results in no functional change, but removes a further piece
of platform-specific code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/kernel/traps.c | 3 +++
arch/mips/mti-malta/malta-int.c | 15 ---------------
arch/mips/mti-malta/malta-setup.c | 6 ------
3 files changed, 3 insertions(+), 21 deletions(-)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 3de85be..e2c571d 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -48,6 +48,7 @@
#include <asm/fpu.h>
#include <asm/fpu_emulator.h>
#include <asm/idle.h>
+#include <asm/mips-cm.h>
#include <asm/mips-r2-to-r6-emul.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
@@ -444,6 +445,8 @@ asmlinkage void do_be(struct pt_regs *regs)
if (board_be_handler)
action = board_be_handler(regs, fixup != NULL);
+ else
+ mips_cm_error_report();
switch (action) {
case MIPS_BE_DISCARD:
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index c6a6c7a..548130d 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -376,18 +376,3 @@ void __init arch_init_irq(void)
setup_irq(i8259_irq, &i8259irq);
setup_irq(corehi_irq, &corehi_irqaction);
}
-
-void malta_be_init(void)
-{
- /* Could change CM error mask register. */
-}
-
-int malta_be_handler(struct pt_regs *regs, int is_fixup)
-{
- /* This duplicates the handling in do_be which seems wrong */
- int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
-
- mips_cm_error_report();
-
- return retval;
-}
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index d7d151f..2f25930 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -39,9 +39,6 @@
#include <linux/console.h>
#endif
-extern void malta_be_init(void);
-extern int malta_be_handler(struct pt_regs *regs, int is_fixup);
-
static struct resource standard_io_resources[] = {
{
.name = "dma1",
@@ -295,7 +292,4 @@ void __init plat_mem_setup(void)
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
screen_info_setup();
#endif
-
- board_be_init = malta_be_init;
- board_be_handler = malta_be_handler;
}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 11/26] dt-bindings: Document mti,mips-cpc binding
2016-08-30 17:29 ` Paul Burton
@ 2016-08-30 17:29 ` Paul Burton
-1 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, devicetree, Mark Rutland, Rob Herring, linux-kernel
Document a binding for the MIPS Cluster Power Controller (CPC) which
simply allows the device tree to specify where the CPC registers should
be mapped.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
Documentation/devicetree/bindings/misc/mti,mips-cpc.txt | 8 ++++++++
1 file changed, 8 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
diff --git a/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt b/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
new file mode 100644
index 0000000..92eb08f
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
@@ -0,0 +1,8 @@
+Binding for MIPS Cluster Power Controller (CPC).
+
+This binding allows a system to specify where the CPC registers should be
+mapped using device tree.
+
+Required properties:
+compatible : Should be "mti,mips-cpc".
+regs: Should describe the address & size of the CPC register region.
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 11/26] dt-bindings: Document mti,mips-cpc binding
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, devicetree, Mark Rutland, Rob Herring, linux-kernel
Document a binding for the MIPS Cluster Power Controller (CPC) which
simply allows the device tree to specify where the CPC registers should
be mapped.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
Documentation/devicetree/bindings/misc/mti,mips-cpc.txt | 8 ++++++++
1 file changed, 8 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
diff --git a/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt b/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
new file mode 100644
index 0000000..92eb08f
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
@@ -0,0 +1,8 @@
+Binding for MIPS Cluster Power Controller (CPC).
+
+This binding allows a system to specify where the CPC registers should be
+mapped using device tree.
+
+Required properties:
+compatible : Should be "mti,mips-cpc".
+regs: Should describe the address & size of the CPC register region.
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 12/26] MIPS: CPC: Provide a default mips_cpc_default_phys_base
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle; +Cc: Paul Burton, linux-kernel
Provide a weak default implementation of mips_cpc_default_phys_base
which reads the base address of the CPC from the device tree if
possible, and failing that returns the existing physical address of the
CPC as read from CPC base address GCR. This allows for platforms to make
use of the CPC without requiring platform code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/kernel/mips-cpc.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c
index 566b8d2..b188787 100644
--- a/arch/mips/kernel/mips-cpc.c
+++ b/arch/mips/kernel/mips-cpc.c
@@ -9,6 +9,8 @@
*/
#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/percpu.h>
#include <linux/spinlock.h>
@@ -21,6 +23,22 @@ static DEFINE_PER_CPU_ALIGNED(spinlock_t, cpc_core_lock);
static DEFINE_PER_CPU_ALIGNED(unsigned long, cpc_core_lock_flags);
+__weak phys_addr_t mips_cpc_default_phys_base(void)
+{
+ struct device_node *cpc_node;
+ struct resource res;
+ int err;
+
+ cpc_node = of_find_compatible_node(of_root, NULL, "mti,mips-cpc");
+ if (cpc_node) {
+ err = of_address_to_resource(cpc_node, 0, &res);
+ if (!err)
+ return res.start;
+ }
+
+ return read_gcr_cpc_base() & CM_GCR_CPC_BASE_CPCBASE_MSK;
+}
+
/**
* mips_cpc_phys_base - retrieve the physical base address of the CPC
*
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 12/26] MIPS: CPC: Provide a default mips_cpc_default_phys_base
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle; +Cc: Paul Burton, linux-kernel
Provide a weak default implementation of mips_cpc_default_phys_base
which reads the base address of the CPC from the device tree if
possible, and failing that returns the existing physical address of the
CPC as read from CPC base address GCR. This allows for platforms to make
use of the CPC without requiring platform code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/kernel/mips-cpc.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c
index 566b8d2..b188787 100644
--- a/arch/mips/kernel/mips-cpc.c
+++ b/arch/mips/kernel/mips-cpc.c
@@ -9,6 +9,8 @@
*/
#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/percpu.h>
#include <linux/spinlock.h>
@@ -21,6 +23,22 @@ static DEFINE_PER_CPU_ALIGNED(spinlock_t, cpc_core_lock);
static DEFINE_PER_CPU_ALIGNED(unsigned long, cpc_core_lock_flags);
+__weak phys_addr_t mips_cpc_default_phys_base(void)
+{
+ struct device_node *cpc_node;
+ struct resource res;
+ int err;
+
+ cpc_node = of_find_compatible_node(of_root, NULL, "mti,mips-cpc");
+ if (cpc_node) {
+ err = of_address_to_resource(cpc_node, 0, &res);
+ if (!err)
+ return res.start;
+ }
+
+ return read_gcr_cpc_base() & CM_GCR_CPC_BASE_CPCBASE_MSK;
+}
+
/**
* mips_cpc_phys_base - retrieve the physical base address of the CPC
*
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* Re: [PATCH v2 12/26] MIPS: CPC: Provide a default mips_cpc_default_phys_base
2016-08-30 17:29 ` Paul Burton
(?)
@ 2016-08-31 10:21 ` Sergei Shtylyov
-1 siblings, 0 replies; 58+ messages in thread
From: Sergei Shtylyov @ 2016-08-31 10:21 UTC (permalink / raw)
To: Paul Burton, linux-mips, Ralf Baechle; +Cc: linux-kernel
Hello.
On 8/30/2016 8:29 PM, Paul Burton wrote:
> Provide a weak default implementation of mips_cpc_default_phys_base
> which reads the base address of the CPC from the device tree if
> possible, and failing that returns the existing physical address of the
> CPC as read from CPC base address GCR. This allows for platforms to make
> use of the CPC without requiring platform code.
>
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> ---
>
> Changes in v2: None
>
> arch/mips/kernel/mips-cpc.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c
> index 566b8d2..b188787 100644
> --- a/arch/mips/kernel/mips-cpc.c
> +++ b/arch/mips/kernel/mips-cpc.c
[...]
> @@ -21,6 +23,22 @@ static DEFINE_PER_CPU_ALIGNED(spinlock_t, cpc_core_lock);
>
> static DEFINE_PER_CPU_ALIGNED(unsigned long, cpc_core_lock_flags);
>
> +__weak phys_addr_t mips_cpc_default_phys_base(void)
I think it would look better as:
phys_addr_t __weak mips_cpc_default_phys_base(void)
The other weak function you touch further in the patchset looks this way...
[...]
MBR, Sergei
^ permalink raw reply [flat|nested] 58+ messages in thread
* [PATCH v2 13/26] dt-bindings: Document mti,mips-cdmm binding
2016-08-30 17:29 ` Paul Burton
@ 2016-08-30 17:29 ` Paul Burton
-1 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, devicetree, Mark Rutland, Rob Herring, linux-kernel
Document a binding for the MIPS Common Device Memory Map (CDMM) which
simply allows the device tree to specify where the CDMM registers should
be mapped.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
Documentation/devicetree/bindings/misc/mti,mips-cdmm.txt | 8 ++++++++
1 file changed, 8 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/mti,mips-cdmm.txt
diff --git a/Documentation/devicetree/bindings/misc/mti,mips-cdmm.txt b/Documentation/devicetree/bindings/misc/mti,mips-cdmm.txt
new file mode 100644
index 0000000..5b0fc40
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/mti,mips-cdmm.txt
@@ -0,0 +1,8 @@
+Binding for MIPS Common Device Memory Map (CDMM) bus.
+
+This binding allows a system to specify where the CDMM registers should be
+mapped using device tree.
+
+Required properties:
+compatible : Should be "mti,mips-cdmm".
+regs: Should describe the address & size of the CDMM register region.
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 13/26] dt-bindings: Document mti,mips-cdmm binding
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, devicetree, Mark Rutland, Rob Herring, linux-kernel
Document a binding for the MIPS Common Device Memory Map (CDMM) which
simply allows the device tree to specify where the CDMM registers should
be mapped.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
Documentation/devicetree/bindings/misc/mti,mips-cdmm.txt | 8 ++++++++
1 file changed, 8 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/mti,mips-cdmm.txt
diff --git a/Documentation/devicetree/bindings/misc/mti,mips-cdmm.txt b/Documentation/devicetree/bindings/misc/mti,mips-cdmm.txt
new file mode 100644
index 0000000..5b0fc40
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/mti,mips-cdmm.txt
@@ -0,0 +1,8 @@
+Binding for MIPS Common Device Memory Map (CDMM) bus.
+
+This binding allows a system to specify where the CDMM registers should be
+mapped using device tree.
+
+Required properties:
+compatible : Should be "mti,mips-cdmm".
+regs: Should describe the address & size of the CDMM register region.
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 14/26] MIPS: CDMM: Allow CDMM base address to be specified via DT
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Bjorn Helgaas, linux-kernel, James Hogan,
Anna-Maria Gleixner
Allow systems to specify the base address for the CDMM using device
tree. This removes the need for it to be specified by platform specific
code, preparing for generic kernels which can run without any.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
drivers/bus/mips_cdmm.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/bus/mips_cdmm.c b/drivers/bus/mips_cdmm.c
index cad49bc..311ce54 100644
--- a/drivers/bus/mips_cdmm.c
+++ b/drivers/bus/mips_cdmm.c
@@ -13,6 +13,8 @@
#include <linux/cpu.h>
#include <linux/cpumask.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/smp.h>
@@ -340,6 +342,17 @@ static phys_addr_t mips_cdmm_cur_base(void)
*/
phys_addr_t __weak mips_cdmm_phys_base(void)
{
+ struct device_node *cdmm_node;
+ struct resource res;
+ int err;
+
+ cdmm_node = of_find_compatible_node(of_root, NULL, "mti,mips-cdmm");
+ if (cdmm_node) {
+ err = of_address_to_resource(cdmm_node, 0, &res);
+ if (!err)
+ return res.start;
+ }
+
return 0;
}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 14/26] MIPS: CDMM: Allow CDMM base address to be specified via DT
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Bjorn Helgaas, linux-kernel, James Hogan,
Anna-Maria Gleixner
Allow systems to specify the base address for the CDMM using device
tree. This removes the need for it to be specified by platform specific
code, preparing for generic kernels which can run without any.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
drivers/bus/mips_cdmm.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/bus/mips_cdmm.c b/drivers/bus/mips_cdmm.c
index cad49bc..311ce54 100644
--- a/drivers/bus/mips_cdmm.c
+++ b/drivers/bus/mips_cdmm.c
@@ -13,6 +13,8 @@
#include <linux/cpu.h>
#include <linux/cpumask.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/smp.h>
@@ -340,6 +342,17 @@ static phys_addr_t mips_cdmm_cur_base(void)
*/
phys_addr_t __weak mips_cdmm_phys_base(void)
{
+ struct device_node *cdmm_node;
+ struct resource res;
+ int err;
+
+ cdmm_node = of_find_compatible_node(of_root, NULL, "mti,mips-cdmm");
+ if (cdmm_node) {
+ err = of_address_to_resource(cdmm_node, 0, &res);
+ if (!err)
+ return res.start;
+ }
+
return 0;
}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 15/26] irqchip: mips-cpu: Replace magic 0x100 with IE_SW0
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Marc Zyngier, Jason Cooper, Thomas Gleixner, linux-kernel
Replace use of the magic number 0x100 (ie. bit 8) with the more
explanatory IE_SW0 (ie. interrupt enable for software interrupt 0) or
C_SW0 (ie. cause bit for software interrupt 0) as appropriate.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
drivers/irqchip/irq-mips-cpu.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/irqchip/irq-mips-cpu.c b/drivers/irqchip/irq-mips-cpu.c
index 8c504f5..e6b4136 100644
--- a/drivers/irqchip/irq-mips-cpu.c
+++ b/drivers/irqchip/irq-mips-cpu.c
@@ -41,13 +41,13 @@
static inline void unmask_mips_irq(struct irq_data *d)
{
- set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ set_c0_status(IE_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
irq_enable_hazard();
}
static inline void mask_mips_irq(struct irq_data *d)
{
- clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ clear_c0_status(IE_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
irq_disable_hazard();
}
@@ -70,7 +70,7 @@ static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
{
unsigned int vpflags = dvpe();
- clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ clear_c0_cause(C_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
evpe(vpflags);
unmask_mips_irq(d);
return 0;
@@ -83,7 +83,7 @@ static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
static void mips_mt_cpu_irq_ack(struct irq_data *d)
{
unsigned int vpflags = dvpe();
- clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ clear_c0_cause(C_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
evpe(vpflags);
mask_mips_irq(d);
}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 15/26] irqchip: mips-cpu: Replace magic 0x100 with IE_SW0
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Marc Zyngier, Jason Cooper, Thomas Gleixner, linux-kernel
Replace use of the magic number 0x100 (ie. bit 8) with the more
explanatory IE_SW0 (ie. interrupt enable for software interrupt 0) or
C_SW0 (ie. cause bit for software interrupt 0) as appropriate.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
drivers/irqchip/irq-mips-cpu.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/irqchip/irq-mips-cpu.c b/drivers/irqchip/irq-mips-cpu.c
index 8c504f5..e6b4136 100644
--- a/drivers/irqchip/irq-mips-cpu.c
+++ b/drivers/irqchip/irq-mips-cpu.c
@@ -41,13 +41,13 @@
static inline void unmask_mips_irq(struct irq_data *d)
{
- set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ set_c0_status(IE_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
irq_enable_hazard();
}
static inline void mask_mips_irq(struct irq_data *d)
{
- clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ clear_c0_status(IE_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
irq_disable_hazard();
}
@@ -70,7 +70,7 @@ static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
{
unsigned int vpflags = dvpe();
- clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ clear_c0_cause(C_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
evpe(vpflags);
unmask_mips_irq(d);
return 0;
@@ -83,7 +83,7 @@ static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
static void mips_mt_cpu_irq_ack(struct irq_data *d)
{
unsigned int vpflags = dvpe();
- clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ clear_c0_cause(C_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
evpe(vpflags);
mask_mips_irq(d);
}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 16/26] irqchip: mips-cpu: Prepare for non-legacy IRQ domains
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Marc Zyngier, Jason Cooper, Thomas Gleixner, linux-kernel
The various struct irq_chip callbacks in the MIPS CPU interrupt
controller driver have been calculating the hardware interrupt number by
subtracting MIPS_CPU_IRQ_BASE from the virq number. This presumes a
linear mapping beginning from MIPS_CPU_IRQ_BASE, and this will not hold
once an IPI IRQ domain is introduced. Switch to using the hwirq field of
struct irq_data which already contains the hardware interrupt number
instead of attempting to calculate it.
Similarly, plat_irq_dispatch calculated the virq number by adding
MIPS_CPU_IRQ_BASE to the hardware interrupt number. Ready this for the
introduction of an IPI IRQ domain by instead using irq_linear_revmap.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
drivers/irqchip/irq-mips-cpu.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/irqchip/irq-mips-cpu.c b/drivers/irqchip/irq-mips-cpu.c
index e6b4136..338de92 100644
--- a/drivers/irqchip/irq-mips-cpu.c
+++ b/drivers/irqchip/irq-mips-cpu.c
@@ -39,15 +39,17 @@
#include <asm/mipsmtregs.h>
#include <asm/setup.h>
+static struct irq_domain *irq_domain;
+
static inline void unmask_mips_irq(struct irq_data *d)
{
- set_c0_status(IE_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
+ set_c0_status(IE_SW0 << d->hwirq);
irq_enable_hazard();
}
static inline void mask_mips_irq(struct irq_data *d)
{
- clear_c0_status(IE_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
+ clear_c0_status(IE_SW0 << d->hwirq);
irq_disable_hazard();
}
@@ -70,7 +72,7 @@ static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
{
unsigned int vpflags = dvpe();
- clear_c0_cause(C_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
+ clear_c0_cause(C_SW0 << d->hwirq);
evpe(vpflags);
unmask_mips_irq(d);
return 0;
@@ -83,7 +85,7 @@ static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
static void mips_mt_cpu_irq_ack(struct irq_data *d)
{
unsigned int vpflags = dvpe();
- clear_c0_cause(C_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
+ clear_c0_cause(C_SW0 << d->hwirq);
evpe(vpflags);
mask_mips_irq(d);
}
@@ -103,6 +105,7 @@ static struct irq_chip mips_mt_cpu_irq_controller = {
asmlinkage void __weak plat_irq_dispatch(void)
{
unsigned long pending = read_c0_cause() & read_c0_status() & ST0_IM;
+ unsigned int virq;
int irq;
if (!pending) {
@@ -113,7 +116,8 @@ asmlinkage void __weak plat_irq_dispatch(void)
pending >>= CAUSEB_IP;
while (pending) {
irq = fls(pending) - 1;
- do_IRQ(MIPS_CPU_IRQ_BASE + irq);
+ virq = irq_linear_revmap(irq_domain, irq);
+ do_IRQ(virq);
pending &= ~BIT(irq);
}
}
@@ -145,15 +149,14 @@ static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = {
static void __init __mips_cpu_irq_init(struct device_node *of_node)
{
- struct irq_domain *domain;
-
/* Mask interrupts. */
clear_c0_status(ST0_IM);
clear_c0_cause(CAUSEF_IP);
- domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0,
- &mips_cpu_intc_irq_domain_ops, NULL);
- if (!domain)
+ irq_domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0,
+ &mips_cpu_intc_irq_domain_ops,
+ NULL);
+ if (!irq_domain)
panic("Failed to add irqdomain for MIPS CPU");
}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 16/26] irqchip: mips-cpu: Prepare for non-legacy IRQ domains
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Marc Zyngier, Jason Cooper, Thomas Gleixner, linux-kernel
The various struct irq_chip callbacks in the MIPS CPU interrupt
controller driver have been calculating the hardware interrupt number by
subtracting MIPS_CPU_IRQ_BASE from the virq number. This presumes a
linear mapping beginning from MIPS_CPU_IRQ_BASE, and this will not hold
once an IPI IRQ domain is introduced. Switch to using the hwirq field of
struct irq_data which already contains the hardware interrupt number
instead of attempting to calculate it.
Similarly, plat_irq_dispatch calculated the virq number by adding
MIPS_CPU_IRQ_BASE to the hardware interrupt number. Ready this for the
introduction of an IPI IRQ domain by instead using irq_linear_revmap.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
drivers/irqchip/irq-mips-cpu.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/irqchip/irq-mips-cpu.c b/drivers/irqchip/irq-mips-cpu.c
index e6b4136..338de92 100644
--- a/drivers/irqchip/irq-mips-cpu.c
+++ b/drivers/irqchip/irq-mips-cpu.c
@@ -39,15 +39,17 @@
#include <asm/mipsmtregs.h>
#include <asm/setup.h>
+static struct irq_domain *irq_domain;
+
static inline void unmask_mips_irq(struct irq_data *d)
{
- set_c0_status(IE_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
+ set_c0_status(IE_SW0 << d->hwirq);
irq_enable_hazard();
}
static inline void mask_mips_irq(struct irq_data *d)
{
- clear_c0_status(IE_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
+ clear_c0_status(IE_SW0 << d->hwirq);
irq_disable_hazard();
}
@@ -70,7 +72,7 @@ static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
{
unsigned int vpflags = dvpe();
- clear_c0_cause(C_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
+ clear_c0_cause(C_SW0 << d->hwirq);
evpe(vpflags);
unmask_mips_irq(d);
return 0;
@@ -83,7 +85,7 @@ static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
static void mips_mt_cpu_irq_ack(struct irq_data *d)
{
unsigned int vpflags = dvpe();
- clear_c0_cause(C_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
+ clear_c0_cause(C_SW0 << d->hwirq);
evpe(vpflags);
mask_mips_irq(d);
}
@@ -103,6 +105,7 @@ static struct irq_chip mips_mt_cpu_irq_controller = {
asmlinkage void __weak plat_irq_dispatch(void)
{
unsigned long pending = read_c0_cause() & read_c0_status() & ST0_IM;
+ unsigned int virq;
int irq;
if (!pending) {
@@ -113,7 +116,8 @@ asmlinkage void __weak plat_irq_dispatch(void)
pending >>= CAUSEB_IP;
while (pending) {
irq = fls(pending) - 1;
- do_IRQ(MIPS_CPU_IRQ_BASE + irq);
+ virq = irq_linear_revmap(irq_domain, irq);
+ do_IRQ(virq);
pending &= ~BIT(irq);
}
}
@@ -145,15 +149,14 @@ static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = {
static void __init __mips_cpu_irq_init(struct device_node *of_node)
{
- struct irq_domain *domain;
-
/* Mask interrupts. */
clear_c0_status(ST0_IM);
clear_c0_cause(CAUSEF_IP);
- domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0,
- &mips_cpu_intc_irq_domain_ops, NULL);
- if (!domain)
+ irq_domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0,
+ &mips_cpu_intc_irq_domain_ops,
+ NULL);
+ if (!irq_domain)
panic("Failed to add irqdomain for MIPS CPU");
}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 17/26] irqchip: mips-cpu: Introduce IPI IRQ domain support
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Marc Zyngier, Jason Cooper, Thomas Gleixner, linux-kernel
Introduce support for registering an IPI IRQ domain suitable for use by
systems using the MIPS MT (multithreading) ASE within a single core.
This will allow for such systems to be supported generically, without
the current kludge of IPI code split between the MIPS arch & the malta
board support code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
drivers/irqchip/Kconfig | 2 +
drivers/irqchip/irq-mips-cpu.c | 128 ++++++++++++++++++++++++++++++++++++++---
2 files changed, 122 insertions(+), 8 deletions(-)
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 7f87289..8af8704 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -127,7 +127,9 @@ config IMGPDC_IRQ
config IRQ_MIPS_CPU
bool
select GENERIC_IRQ_CHIP
+ select GENERIC_IRQ_IPI if SYS_SUPPORTS_MULTITHREADING
select IRQ_DOMAIN
+ select IRQ_DOMAIN_HIERARCHY if GENERIC_IRQ_IPI
config CLPS711X_IRQCHIP
bool
diff --git a/drivers/irqchip/irq-mips-cpu.c b/drivers/irqchip/irq-mips-cpu.c
index 338de92..8108257 100644
--- a/drivers/irqchip/irq-mips-cpu.c
+++ b/drivers/irqchip/irq-mips-cpu.c
@@ -17,15 +17,14 @@
/*
* Almost all MIPS CPUs define 8 interrupt sources. They are typically
* level triggered (i.e., cannot be cleared from CPU; must be cleared from
- * device). The first two are software interrupts which we don't really
- * use or support. The last one is usually the CPU timer interrupt if
- * counter register is present or, for CPUs with an external FPU, by
- * convention it's the FPU exception interrupt.
+ * device).
*
- * Don't even think about using this on SMP. You have been warned.
+ * The first two are software interrupts (i.e. not exposed as pins) which
+ * may be used for IPIs in multi-threaded single-core systems.
*
- * This file exports one global function:
- * void mips_cpu_irq_init(void);
+ * The last one is usually the CPU timer interrupt if the counter register
+ * is present, or for old CPUs with an external FPU by convention it's the
+ * FPU exception interrupt.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -40,6 +39,7 @@
#include <asm/setup.h>
static struct irq_domain *irq_domain;
+static struct irq_domain *ipi_domain;
static inline void unmask_mips_irq(struct irq_data *d)
{
@@ -90,6 +90,29 @@ static void mips_mt_cpu_irq_ack(struct irq_data *d)
mask_mips_irq(d);
}
+#ifdef CONFIG_GENERIC_IRQ_IPI
+
+static void mips_mt_send_ipi(struct irq_data *d, unsigned int cpu)
+{
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ unsigned long flags;
+ int vpflags;
+
+ local_irq_save(flags);
+
+ /* We can only send IPIs to VPEs within the local core */
+ BUG_ON(cpu_data[cpu].core != current_cpu_data.core);
+
+ vpflags = dvpe();
+ settc(cpu_vpe_id(&cpu_data[cpu]));
+ write_vpe_c0_cause(read_vpe_c0_cause() | (C_SW0 << hwirq));
+ evpe(vpflags);
+
+ local_irq_restore(flags);
+}
+
+#endif /* CONFIG_GENERIC_IRQ_IPI */
+
static struct irq_chip mips_mt_cpu_irq_controller = {
.name = "MIPS",
.irq_startup = mips_mt_cpu_irq_startup,
@@ -100,6 +123,9 @@ static struct irq_chip mips_mt_cpu_irq_controller = {
.irq_eoi = unmask_mips_irq,
.irq_disable = mask_mips_irq,
.irq_enable = unmask_mips_irq,
+#ifdef CONFIG_GENERIC_IRQ_IPI
+ .ipi_send_single= mips_mt_send_ipi,
+#endif
};
asmlinkage void __weak plat_irq_dispatch(void)
@@ -116,7 +142,10 @@ asmlinkage void __weak plat_irq_dispatch(void)
pending >>= CAUSEB_IP;
while (pending) {
irq = fls(pending) - 1;
- virq = irq_linear_revmap(irq_domain, irq);
+ if (IS_ENABLED(CONFIG_GENERIC_IRQ_IPI) && irq < 2)
+ virq = irq_linear_revmap(ipi_domain, irq);
+ else
+ virq = irq_linear_revmap(irq_domain, irq);
do_IRQ(virq);
pending &= ~BIT(irq);
}
@@ -147,6 +176,82 @@ static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = {
.xlate = irq_domain_xlate_onecell,
};
+#ifdef CONFIG_GENERIC_IRQ_IPI
+
+struct cpu_ipi_domain_state {
+ DECLARE_BITMAP(allocated, 2);
+};
+
+static int mips_cpu_ipi_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ struct cpu_ipi_domain_state *state = domain->host_data;
+ unsigned int i, hwirq;
+ int ret;
+
+ for (i = 0; i < nr_irqs; i++) {
+ hwirq = find_first_zero_bit(state->allocated, 2);
+ if (hwirq == 2)
+ return -EBUSY;
+ bitmap_set(state->allocated, hwirq, 1);
+
+ ret = irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq,
+ &mips_mt_cpu_irq_controller,
+ NULL);
+ if (ret)
+ return ret;
+
+ ret = irq_set_irq_type(virq + i, IRQ_TYPE_LEVEL_HIGH);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mips_cpu_ipi_match(struct irq_domain *d, struct device_node *node,
+ enum irq_domain_bus_token bus_token)
+{
+ bool is_ipi;
+
+ switch (bus_token) {
+ case DOMAIN_BUS_IPI:
+ is_ipi = d->bus_token == bus_token;
+ return (!node || (to_of_node(d->fwnode) == node)) && is_ipi;
+ default:
+ return 0;
+ }
+}
+
+static const struct irq_domain_ops mips_cpu_ipi_chip_ops = {
+ .alloc = mips_cpu_ipi_alloc,
+ .match = mips_cpu_ipi_match,
+};
+
+static void mips_cpu_register_ipi_domain(struct device_node *of_node)
+{
+ struct cpu_ipi_domain_state *ipi_domain_state;
+
+ ipi_domain_state = kzalloc(sizeof(*ipi_domain_state), GFP_KERNEL);
+ if (!ipi_domain_state)
+ panic("Failed to alloc IPI domain state");
+
+ ipi_domain = irq_domain_add_hierarchy(irq_domain,
+ IRQ_DOMAIN_FLAG_IPI_SINGLE,
+ 2, of_node,
+ &mips_cpu_ipi_chip_ops,
+ ipi_domain_state);
+ if (!ipi_domain)
+ panic("Failed to add MIPS CPU IPI domain");
+ ipi_domain->bus_token = DOMAIN_BUS_IPI;
+}
+
+#else /* !CONFIG_GENERIC_IRQ_IPI */
+
+static inline void mips_cpu_register_ipi_domain(struct device_node *of_node) {}
+
+#endif /* !CONFIG_GENERIC_IRQ_IPI */
+
static void __init __mips_cpu_irq_init(struct device_node *of_node)
{
/* Mask interrupts. */
@@ -158,6 +263,13 @@ static void __init __mips_cpu_irq_init(struct device_node *of_node)
NULL);
if (!irq_domain)
panic("Failed to add irqdomain for MIPS CPU");
+
+ /*
+ * Only proceed to register the software interrupt IPI implementation
+ * for CPUs which implement the MIPS MT (multi-threading) ASE.
+ */
+ if (cpu_has_mipsmt)
+ mips_cpu_register_ipi_domain(of_node);
}
void __init mips_cpu_irq_init(void)
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 17/26] irqchip: mips-cpu: Introduce IPI IRQ domain support
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Marc Zyngier, Jason Cooper, Thomas Gleixner, linux-kernel
Introduce support for registering an IPI IRQ domain suitable for use by
systems using the MIPS MT (multithreading) ASE within a single core.
This will allow for such systems to be supported generically, without
the current kludge of IPI code split between the MIPS arch & the malta
board support code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
drivers/irqchip/Kconfig | 2 +
drivers/irqchip/irq-mips-cpu.c | 128 ++++++++++++++++++++++++++++++++++++++---
2 files changed, 122 insertions(+), 8 deletions(-)
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 7f87289..8af8704 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -127,7 +127,9 @@ config IMGPDC_IRQ
config IRQ_MIPS_CPU
bool
select GENERIC_IRQ_CHIP
+ select GENERIC_IRQ_IPI if SYS_SUPPORTS_MULTITHREADING
select IRQ_DOMAIN
+ select IRQ_DOMAIN_HIERARCHY if GENERIC_IRQ_IPI
config CLPS711X_IRQCHIP
bool
diff --git a/drivers/irqchip/irq-mips-cpu.c b/drivers/irqchip/irq-mips-cpu.c
index 338de92..8108257 100644
--- a/drivers/irqchip/irq-mips-cpu.c
+++ b/drivers/irqchip/irq-mips-cpu.c
@@ -17,15 +17,14 @@
/*
* Almost all MIPS CPUs define 8 interrupt sources. They are typically
* level triggered (i.e., cannot be cleared from CPU; must be cleared from
- * device). The first two are software interrupts which we don't really
- * use or support. The last one is usually the CPU timer interrupt if
- * counter register is present or, for CPUs with an external FPU, by
- * convention it's the FPU exception interrupt.
+ * device).
*
- * Don't even think about using this on SMP. You have been warned.
+ * The first two are software interrupts (i.e. not exposed as pins) which
+ * may be used for IPIs in multi-threaded single-core systems.
*
- * This file exports one global function:
- * void mips_cpu_irq_init(void);
+ * The last one is usually the CPU timer interrupt if the counter register
+ * is present, or for old CPUs with an external FPU by convention it's the
+ * FPU exception interrupt.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -40,6 +39,7 @@
#include <asm/setup.h>
static struct irq_domain *irq_domain;
+static struct irq_domain *ipi_domain;
static inline void unmask_mips_irq(struct irq_data *d)
{
@@ -90,6 +90,29 @@ static void mips_mt_cpu_irq_ack(struct irq_data *d)
mask_mips_irq(d);
}
+#ifdef CONFIG_GENERIC_IRQ_IPI
+
+static void mips_mt_send_ipi(struct irq_data *d, unsigned int cpu)
+{
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ unsigned long flags;
+ int vpflags;
+
+ local_irq_save(flags);
+
+ /* We can only send IPIs to VPEs within the local core */
+ BUG_ON(cpu_data[cpu].core != current_cpu_data.core);
+
+ vpflags = dvpe();
+ settc(cpu_vpe_id(&cpu_data[cpu]));
+ write_vpe_c0_cause(read_vpe_c0_cause() | (C_SW0 << hwirq));
+ evpe(vpflags);
+
+ local_irq_restore(flags);
+}
+
+#endif /* CONFIG_GENERIC_IRQ_IPI */
+
static struct irq_chip mips_mt_cpu_irq_controller = {
.name = "MIPS",
.irq_startup = mips_mt_cpu_irq_startup,
@@ -100,6 +123,9 @@ static struct irq_chip mips_mt_cpu_irq_controller = {
.irq_eoi = unmask_mips_irq,
.irq_disable = mask_mips_irq,
.irq_enable = unmask_mips_irq,
+#ifdef CONFIG_GENERIC_IRQ_IPI
+ .ipi_send_single= mips_mt_send_ipi,
+#endif
};
asmlinkage void __weak plat_irq_dispatch(void)
@@ -116,7 +142,10 @@ asmlinkage void __weak plat_irq_dispatch(void)
pending >>= CAUSEB_IP;
while (pending) {
irq = fls(pending) - 1;
- virq = irq_linear_revmap(irq_domain, irq);
+ if (IS_ENABLED(CONFIG_GENERIC_IRQ_IPI) && irq < 2)
+ virq = irq_linear_revmap(ipi_domain, irq);
+ else
+ virq = irq_linear_revmap(irq_domain, irq);
do_IRQ(virq);
pending &= ~BIT(irq);
}
@@ -147,6 +176,82 @@ static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = {
.xlate = irq_domain_xlate_onecell,
};
+#ifdef CONFIG_GENERIC_IRQ_IPI
+
+struct cpu_ipi_domain_state {
+ DECLARE_BITMAP(allocated, 2);
+};
+
+static int mips_cpu_ipi_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ struct cpu_ipi_domain_state *state = domain->host_data;
+ unsigned int i, hwirq;
+ int ret;
+
+ for (i = 0; i < nr_irqs; i++) {
+ hwirq = find_first_zero_bit(state->allocated, 2);
+ if (hwirq == 2)
+ return -EBUSY;
+ bitmap_set(state->allocated, hwirq, 1);
+
+ ret = irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq,
+ &mips_mt_cpu_irq_controller,
+ NULL);
+ if (ret)
+ return ret;
+
+ ret = irq_set_irq_type(virq + i, IRQ_TYPE_LEVEL_HIGH);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mips_cpu_ipi_match(struct irq_domain *d, struct device_node *node,
+ enum irq_domain_bus_token bus_token)
+{
+ bool is_ipi;
+
+ switch (bus_token) {
+ case DOMAIN_BUS_IPI:
+ is_ipi = d->bus_token == bus_token;
+ return (!node || (to_of_node(d->fwnode) == node)) && is_ipi;
+ default:
+ return 0;
+ }
+}
+
+static const struct irq_domain_ops mips_cpu_ipi_chip_ops = {
+ .alloc = mips_cpu_ipi_alloc,
+ .match = mips_cpu_ipi_match,
+};
+
+static void mips_cpu_register_ipi_domain(struct device_node *of_node)
+{
+ struct cpu_ipi_domain_state *ipi_domain_state;
+
+ ipi_domain_state = kzalloc(sizeof(*ipi_domain_state), GFP_KERNEL);
+ if (!ipi_domain_state)
+ panic("Failed to alloc IPI domain state");
+
+ ipi_domain = irq_domain_add_hierarchy(irq_domain,
+ IRQ_DOMAIN_FLAG_IPI_SINGLE,
+ 2, of_node,
+ &mips_cpu_ipi_chip_ops,
+ ipi_domain_state);
+ if (!ipi_domain)
+ panic("Failed to add MIPS CPU IPI domain");
+ ipi_domain->bus_token = DOMAIN_BUS_IPI;
+}
+
+#else /* !CONFIG_GENERIC_IRQ_IPI */
+
+static inline void mips_cpu_register_ipi_domain(struct device_node *of_node) {}
+
+#endif /* !CONFIG_GENERIC_IRQ_IPI */
+
static void __init __mips_cpu_irq_init(struct device_node *of_node)
{
/* Mask interrupts. */
@@ -158,6 +263,13 @@ static void __init __mips_cpu_irq_init(struct device_node *of_node)
NULL);
if (!irq_domain)
panic("Failed to add irqdomain for MIPS CPU");
+
+ /*
+ * Only proceed to register the software interrupt IPI implementation
+ * for CPUs which implement the MIPS MT (multi-threading) ASE.
+ */
+ if (cpu_has_mipsmt)
+ mips_cpu_register_ipi_domain(of_node);
}
void __init mips_cpu_irq_init(void)
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* Re: [PATCH v2 17/26] irqchip: mips-cpu: Introduce IPI IRQ domain support
2016-08-30 17:29 ` Paul Burton
(?)
@ 2016-09-01 19:46 ` Jason Cooper
-1 siblings, 0 replies; 58+ messages in thread
From: Jason Cooper @ 2016-09-01 19:46 UTC (permalink / raw)
To: Paul Burton
Cc: linux-mips, Ralf Baechle, Marc Zyngier, Thomas Gleixner, linux-kernel
Hi Paul,
On Tue, Aug 30, 2016 at 06:29:20PM +0100, Paul Burton wrote:
> Introduce support for registering an IPI IRQ domain suitable for use by
> systems using the MIPS MT (multithreading) ASE within a single core.
> This will allow for such systems to be supported generically, without
> the current kludge of IPI code split between the MIPS arch & the malta
> board support code.
>
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> ---
>
> Changes in v2: None
>
> drivers/irqchip/Kconfig | 2 +
> drivers/irqchip/irq-mips-cpu.c | 128 ++++++++++++++++++++++++++++++++++++++---
> 2 files changed, 122 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 7f87289..8af8704 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -127,7 +127,9 @@ config IMGPDC_IRQ
> config IRQ_MIPS_CPU
> bool
> select GENERIC_IRQ_CHIP
> + select GENERIC_IRQ_IPI if SYS_SUPPORTS_MULTITHREADING
> select IRQ_DOMAIN
> + select IRQ_DOMAIN_HIERARCHY if GENERIC_IRQ_IPI
>
> config CLPS711X_IRQCHIP
> bool
> diff --git a/drivers/irqchip/irq-mips-cpu.c b/drivers/irqchip/irq-mips-cpu.c
> index 338de92..8108257 100644
> --- a/drivers/irqchip/irq-mips-cpu.c
> +++ b/drivers/irqchip/irq-mips-cpu.c
> @@ -17,15 +17,14 @@
> /*
> * Almost all MIPS CPUs define 8 interrupt sources. They are typically
> * level triggered (i.e., cannot be cleared from CPU; must be cleared from
> - * device). The first two are software interrupts which we don't really
> - * use or support. The last one is usually the CPU timer interrupt if
> - * counter register is present or, for CPUs with an external FPU, by
> - * convention it's the FPU exception interrupt.
> + * device).
> *
> - * Don't even think about using this on SMP. You have been warned.
> + * The first two are software interrupts (i.e. not exposed as pins) which
> + * may be used for IPIs in multi-threaded single-core systems.
> *
> - * This file exports one global function:
> - * void mips_cpu_irq_init(void);
> + * The last one is usually the CPU timer interrupt if the counter register
> + * is present, or for old CPUs with an external FPU by convention it's the
> + * FPU exception interrupt.
> */
> #include <linux/init.h>
> #include <linux/interrupt.h>
> @@ -40,6 +39,7 @@
> #include <asm/setup.h>
>
> static struct irq_domain *irq_domain;
> +static struct irq_domain *ipi_domain;
>
> static inline void unmask_mips_irq(struct irq_data *d)
> {
> @@ -90,6 +90,29 @@ static void mips_mt_cpu_irq_ack(struct irq_data *d)
> mask_mips_irq(d);
> }
>
> +#ifdef CONFIG_GENERIC_IRQ_IPI
Looking this over, you're adding a *lot* of #ifdef's into the code. Why
not put all the ipi code in a separate file, say irq-mips-ipi.c?
Patches 15 and 16 look fine.
thx,
Jason.
> +
> +static void mips_mt_send_ipi(struct irq_data *d, unsigned int cpu)
> +{
> + irq_hw_number_t hwirq = irqd_to_hwirq(d);
> + unsigned long flags;
> + int vpflags;
> +
> + local_irq_save(flags);
> +
> + /* We can only send IPIs to VPEs within the local core */
> + BUG_ON(cpu_data[cpu].core != current_cpu_data.core);
> +
> + vpflags = dvpe();
> + settc(cpu_vpe_id(&cpu_data[cpu]));
> + write_vpe_c0_cause(read_vpe_c0_cause() | (C_SW0 << hwirq));
> + evpe(vpflags);
> +
> + local_irq_restore(flags);
> +}
> +
> +#endif /* CONFIG_GENERIC_IRQ_IPI */
> +
> static struct irq_chip mips_mt_cpu_irq_controller = {
> .name = "MIPS",
> .irq_startup = mips_mt_cpu_irq_startup,
> @@ -100,6 +123,9 @@ static struct irq_chip mips_mt_cpu_irq_controller = {
> .irq_eoi = unmask_mips_irq,
> .irq_disable = mask_mips_irq,
> .irq_enable = unmask_mips_irq,
> +#ifdef CONFIG_GENERIC_IRQ_IPI
> + .ipi_send_single= mips_mt_send_ipi,
> +#endif
> };
>
> asmlinkage void __weak plat_irq_dispatch(void)
> @@ -116,7 +142,10 @@ asmlinkage void __weak plat_irq_dispatch(void)
> pending >>= CAUSEB_IP;
> while (pending) {
> irq = fls(pending) - 1;
> - virq = irq_linear_revmap(irq_domain, irq);
> + if (IS_ENABLED(CONFIG_GENERIC_IRQ_IPI) && irq < 2)
> + virq = irq_linear_revmap(ipi_domain, irq);
> + else
> + virq = irq_linear_revmap(irq_domain, irq);
> do_IRQ(virq);
> pending &= ~BIT(irq);
> }
> @@ -147,6 +176,82 @@ static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = {
> .xlate = irq_domain_xlate_onecell,
> };
>
> +#ifdef CONFIG_GENERIC_IRQ_IPI
> +
> +struct cpu_ipi_domain_state {
> + DECLARE_BITMAP(allocated, 2);
> +};
> +
> +static int mips_cpu_ipi_alloc(struct irq_domain *domain, unsigned int virq,
> + unsigned int nr_irqs, void *arg)
> +{
> + struct cpu_ipi_domain_state *state = domain->host_data;
> + unsigned int i, hwirq;
> + int ret;
> +
> + for (i = 0; i < nr_irqs; i++) {
> + hwirq = find_first_zero_bit(state->allocated, 2);
> + if (hwirq == 2)
> + return -EBUSY;
> + bitmap_set(state->allocated, hwirq, 1);
> +
> + ret = irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq,
> + &mips_mt_cpu_irq_controller,
> + NULL);
> + if (ret)
> + return ret;
> +
> + ret = irq_set_irq_type(virq + i, IRQ_TYPE_LEVEL_HIGH);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int mips_cpu_ipi_match(struct irq_domain *d, struct device_node *node,
> + enum irq_domain_bus_token bus_token)
> +{
> + bool is_ipi;
> +
> + switch (bus_token) {
> + case DOMAIN_BUS_IPI:
> + is_ipi = d->bus_token == bus_token;
> + return (!node || (to_of_node(d->fwnode) == node)) && is_ipi;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct irq_domain_ops mips_cpu_ipi_chip_ops = {
> + .alloc = mips_cpu_ipi_alloc,
> + .match = mips_cpu_ipi_match,
> +};
> +
> +static void mips_cpu_register_ipi_domain(struct device_node *of_node)
> +{
> + struct cpu_ipi_domain_state *ipi_domain_state;
> +
> + ipi_domain_state = kzalloc(sizeof(*ipi_domain_state), GFP_KERNEL);
> + if (!ipi_domain_state)
> + panic("Failed to alloc IPI domain state");
> +
> + ipi_domain = irq_domain_add_hierarchy(irq_domain,
> + IRQ_DOMAIN_FLAG_IPI_SINGLE,
> + 2, of_node,
> + &mips_cpu_ipi_chip_ops,
> + ipi_domain_state);
> + if (!ipi_domain)
> + panic("Failed to add MIPS CPU IPI domain");
> + ipi_domain->bus_token = DOMAIN_BUS_IPI;
> +}
> +
> +#else /* !CONFIG_GENERIC_IRQ_IPI */
> +
> +static inline void mips_cpu_register_ipi_domain(struct device_node *of_node) {}
> +
> +#endif /* !CONFIG_GENERIC_IRQ_IPI */
> +
> static void __init __mips_cpu_irq_init(struct device_node *of_node)
> {
> /* Mask interrupts. */
> @@ -158,6 +263,13 @@ static void __init __mips_cpu_irq_init(struct device_node *of_node)
> NULL);
> if (!irq_domain)
> panic("Failed to add irqdomain for MIPS CPU");
> +
> + /*
> + * Only proceed to register the software interrupt IPI implementation
> + * for CPUs which implement the MIPS MT (multi-threading) ASE.
> + */
> + if (cpu_has_mipsmt)
> + mips_cpu_register_ipi_domain(of_node);
> }
>
> void __init mips_cpu_irq_init(void)
> --
> 2.9.3
>
^ permalink raw reply [flat|nested] 58+ messages in thread
* [PATCH v2 18/26] MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Qais Yousef, John Crispin, linux-kernel, Thomas Gleixner
Remove the smp-mt IPI code that supported single-core multithreaded
systems and instead make use of the IPI IRQ domain support provided by
the MIPS CPU interrupt controller driver. This removes some less than
nice code, the horrible split between arch & board code and the
duplication that led to within board code.
The lantiq portion of this patch has only been compile tested. Malta has
been tested & is functional.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/kernel/smp-mt.c | 49 +++------------------------
arch/mips/lantiq/irq.c | 52 ----------------------------
arch/mips/mti-malta/malta-int.c | 75 ++---------------------------------------
3 files changed, 7 insertions(+), 169 deletions(-)
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 4f9570a..fd3ce15 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -82,6 +82,8 @@ static unsigned int __init smvp_vpe_init(unsigned int tc, unsigned int mvpconf0,
if (tc != 0)
smvp_copy_vpe_config();
+ cpu_data[ncpu].vpe_id = tc;
+
return ncpu;
}
@@ -113,49 +115,6 @@ static void __init smvp_tc_init(unsigned int tc, unsigned int mvpconf0)
write_tc_c0_tchalt(TCHALT_H);
}
-static void vsmp_send_ipi_single(int cpu, unsigned int action)
-{
- int i;
- unsigned long flags;
- int vpflags;
-
-#ifdef CONFIG_MIPS_GIC
- if (gic_present) {
- mips_smp_send_ipi_single(cpu, action);
- return;
- }
-#endif
- local_irq_save(flags);
-
- vpflags = dvpe(); /* can't access the other CPU's registers whilst MVPE enabled */
-
- switch (action) {
- case SMP_CALL_FUNCTION:
- i = C_SW1;
- break;
-
- case SMP_RESCHEDULE_YOURSELF:
- default:
- i = C_SW0;
- break;
- }
-
- /* 1:1 mapping of vpe and tc... */
- settc(cpu);
- write_vpe_c0_cause(read_vpe_c0_cause() | i);
- evpe(vpflags);
-
- local_irq_restore(flags);
-}
-
-static void vsmp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
-{
- unsigned int i;
-
- for_each_cpu(i, mask)
- vsmp_send_ipi_single(i, action);
-}
-
static void vsmp_init_secondary(void)
{
#ifdef CONFIG_MIPS_GIC
@@ -280,8 +239,8 @@ static void __init vsmp_prepare_cpus(unsigned int max_cpus)
}
struct plat_smp_ops vsmp_smp_ops = {
- .send_ipi_single = vsmp_send_ipi_single,
- .send_ipi_mask = vsmp_send_ipi_mask,
+ .send_ipi_single = mips_smp_send_ipi_single,
+ .send_ipi_mask = mips_smp_send_ipi_mask,
.init_secondary = vsmp_init_secondary,
.smp_finish = vsmp_smp_finish,
.boot_secondary = vsmp_boot_secondary,
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index 8ac0e59..eb831d2 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -269,47 +269,6 @@ static void ltq_hw5_irqdispatch(void)
DEFINE_HWx_IRQDISPATCH(5)
#endif
-#ifdef CONFIG_MIPS_MT_SMP
-void __init arch_init_ipiirq(int irq, struct irqaction *action)
-{
- setup_irq(irq, action);
- irq_set_handler(irq, handle_percpu_irq);
-}
-
-static void ltq_sw0_irqdispatch(void)
-{
- do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
-}
-
-static void ltq_sw1_irqdispatch(void)
-{
- do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
-}
-static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
-{
- scheduler_ipi();
- return IRQ_HANDLED;
-}
-
-static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
-{
- generic_smp_call_function_interrupt();
- return IRQ_HANDLED;
-}
-
-static struct irqaction irq_resched = {
- .handler = ipi_resched_interrupt,
- .flags = IRQF_PERCPU,
- .name = "IPI_resched"
-};
-
-static struct irqaction irq_call = {
- .handler = ipi_call_interrupt,
- .flags = IRQF_PERCPU,
- .name = "IPI_call"
-};
-#endif
-
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
@@ -406,17 +365,6 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
(MAX_IM * INT_NUM_IM_OFFSET) + MIPS_CPU_IRQ_CASCADE,
&irq_domain_ops, 0);
-#if defined(CONFIG_MIPS_MT_SMP)
- if (cpu_has_vint) {
- pr_info("Setting up IPI vectored interrupts\n");
- set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ltq_sw0_irqdispatch);
- set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ltq_sw1_irqdispatch);
- }
- arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ,
- &irq_resched);
- arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ, &irq_call);
-#endif
-
#ifndef CONFIG_MIPS_MT_SMP
set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index 548130d..26adb77 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -190,56 +190,6 @@ static irqreturn_t corehi_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-#ifdef CONFIG_MIPS_MT_SMP
-
-#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */
-#define C_RESCHED C_SW0
-#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for resched */
-#define C_CALL C_SW1
-static int cpu_ipi_resched_irq, cpu_ipi_call_irq;
-
-static void ipi_resched_dispatch(void)
-{
- do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
-}
-
-static void ipi_call_dispatch(void)
-{
- do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
-}
-
-static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
-{
-#ifdef CONFIG_MIPS_VPE_APSP_API_CMP
- if (aprp_hook)
- aprp_hook();
-#endif
-
- scheduler_ipi();
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
-{
- generic_smp_call_function_interrupt();
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction irq_resched = {
- .handler = ipi_resched_interrupt,
- .flags = IRQF_PERCPU,
- .name = "IPI_resched"
-};
-
-static struct irqaction irq_call = {
- .handler = ipi_call_interrupt,
- .flags = IRQF_PERCPU,
- .name = "IPI_call"
-};
-#endif /* CONFIG_MIPS_MT_SMP */
-
static struct irqaction i8259irq = {
.handler = i8259_handler,
.name = "XT-PIC cascade",
@@ -273,12 +223,6 @@ static msc_irqmap_t msc_eicirqmap[] __initdata = {
static int msc_nr_eicirqs __initdata = ARRAY_SIZE(msc_eicirqmap);
-void __init arch_init_ipiirq(int irq, struct irqaction *action)
-{
- setup_irq(irq, action);
- irq_set_handler(irq, handle_percpu_irq);
-}
-
void __init arch_init_irq(void)
{
int corehi_irq, i8259_irq;
@@ -343,23 +287,10 @@ void __init arch_init_irq(void)
}
i8259_irq = MIPS_GIC_IRQ_BASE + GIC_INT_I8259A;
corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
+ } else if (cpu_has_veic) {
+ set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch);
+ corehi_irq = MSC01E_INT_BASE + MSC01E_INT_COREHI;
} else {
-#if defined(CONFIG_MIPS_MT_SMP)
- /* set up ipi interrupts */
- if (cpu_has_veic) {
- set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch);
- set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch);
- cpu_ipi_resched_irq = MSC01E_INT_SW0;
- cpu_ipi_call_irq = MSC01E_INT_SW1;
- } else {
- cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE +
- MIPS_CPU_IPI_RESCHED_IRQ;
- cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE +
- MIPS_CPU_IPI_CALL_IRQ;
- }
- arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched);
- arch_init_ipiirq(cpu_ipi_call_irq, &irq_call);
-#endif
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_I8259A,
malta_hw0_irqdispatch);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 18/26] MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Qais Yousef, John Crispin, linux-kernel, Thomas Gleixner
Remove the smp-mt IPI code that supported single-core multithreaded
systems and instead make use of the IPI IRQ domain support provided by
the MIPS CPU interrupt controller driver. This removes some less than
nice code, the horrible split between arch & board code and the
duplication that led to within board code.
The lantiq portion of this patch has only been compile tested. Malta has
been tested & is functional.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/kernel/smp-mt.c | 49 +++------------------------
arch/mips/lantiq/irq.c | 52 ----------------------------
arch/mips/mti-malta/malta-int.c | 75 ++---------------------------------------
3 files changed, 7 insertions(+), 169 deletions(-)
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 4f9570a..fd3ce15 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -82,6 +82,8 @@ static unsigned int __init smvp_vpe_init(unsigned int tc, unsigned int mvpconf0,
if (tc != 0)
smvp_copy_vpe_config();
+ cpu_data[ncpu].vpe_id = tc;
+
return ncpu;
}
@@ -113,49 +115,6 @@ static void __init smvp_tc_init(unsigned int tc, unsigned int mvpconf0)
write_tc_c0_tchalt(TCHALT_H);
}
-static void vsmp_send_ipi_single(int cpu, unsigned int action)
-{
- int i;
- unsigned long flags;
- int vpflags;
-
-#ifdef CONFIG_MIPS_GIC
- if (gic_present) {
- mips_smp_send_ipi_single(cpu, action);
- return;
- }
-#endif
- local_irq_save(flags);
-
- vpflags = dvpe(); /* can't access the other CPU's registers whilst MVPE enabled */
-
- switch (action) {
- case SMP_CALL_FUNCTION:
- i = C_SW1;
- break;
-
- case SMP_RESCHEDULE_YOURSELF:
- default:
- i = C_SW0;
- break;
- }
-
- /* 1:1 mapping of vpe and tc... */
- settc(cpu);
- write_vpe_c0_cause(read_vpe_c0_cause() | i);
- evpe(vpflags);
-
- local_irq_restore(flags);
-}
-
-static void vsmp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
-{
- unsigned int i;
-
- for_each_cpu(i, mask)
- vsmp_send_ipi_single(i, action);
-}
-
static void vsmp_init_secondary(void)
{
#ifdef CONFIG_MIPS_GIC
@@ -280,8 +239,8 @@ static void __init vsmp_prepare_cpus(unsigned int max_cpus)
}
struct plat_smp_ops vsmp_smp_ops = {
- .send_ipi_single = vsmp_send_ipi_single,
- .send_ipi_mask = vsmp_send_ipi_mask,
+ .send_ipi_single = mips_smp_send_ipi_single,
+ .send_ipi_mask = mips_smp_send_ipi_mask,
.init_secondary = vsmp_init_secondary,
.smp_finish = vsmp_smp_finish,
.boot_secondary = vsmp_boot_secondary,
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index 8ac0e59..eb831d2 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -269,47 +269,6 @@ static void ltq_hw5_irqdispatch(void)
DEFINE_HWx_IRQDISPATCH(5)
#endif
-#ifdef CONFIG_MIPS_MT_SMP
-void __init arch_init_ipiirq(int irq, struct irqaction *action)
-{
- setup_irq(irq, action);
- irq_set_handler(irq, handle_percpu_irq);
-}
-
-static void ltq_sw0_irqdispatch(void)
-{
- do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
-}
-
-static void ltq_sw1_irqdispatch(void)
-{
- do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
-}
-static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
-{
- scheduler_ipi();
- return IRQ_HANDLED;
-}
-
-static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
-{
- generic_smp_call_function_interrupt();
- return IRQ_HANDLED;
-}
-
-static struct irqaction irq_resched = {
- .handler = ipi_resched_interrupt,
- .flags = IRQF_PERCPU,
- .name = "IPI_resched"
-};
-
-static struct irqaction irq_call = {
- .handler = ipi_call_interrupt,
- .flags = IRQF_PERCPU,
- .name = "IPI_call"
-};
-#endif
-
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
@@ -406,17 +365,6 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
(MAX_IM * INT_NUM_IM_OFFSET) + MIPS_CPU_IRQ_CASCADE,
&irq_domain_ops, 0);
-#if defined(CONFIG_MIPS_MT_SMP)
- if (cpu_has_vint) {
- pr_info("Setting up IPI vectored interrupts\n");
- set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ltq_sw0_irqdispatch);
- set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ltq_sw1_irqdispatch);
- }
- arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ,
- &irq_resched);
- arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ, &irq_call);
-#endif
-
#ifndef CONFIG_MIPS_MT_SMP
set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index 548130d..26adb77 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -190,56 +190,6 @@ static irqreturn_t corehi_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-#ifdef CONFIG_MIPS_MT_SMP
-
-#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */
-#define C_RESCHED C_SW0
-#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for resched */
-#define C_CALL C_SW1
-static int cpu_ipi_resched_irq, cpu_ipi_call_irq;
-
-static void ipi_resched_dispatch(void)
-{
- do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
-}
-
-static void ipi_call_dispatch(void)
-{
- do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
-}
-
-static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
-{
-#ifdef CONFIG_MIPS_VPE_APSP_API_CMP
- if (aprp_hook)
- aprp_hook();
-#endif
-
- scheduler_ipi();
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
-{
- generic_smp_call_function_interrupt();
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction irq_resched = {
- .handler = ipi_resched_interrupt,
- .flags = IRQF_PERCPU,
- .name = "IPI_resched"
-};
-
-static struct irqaction irq_call = {
- .handler = ipi_call_interrupt,
- .flags = IRQF_PERCPU,
- .name = "IPI_call"
-};
-#endif /* CONFIG_MIPS_MT_SMP */
-
static struct irqaction i8259irq = {
.handler = i8259_handler,
.name = "XT-PIC cascade",
@@ -273,12 +223,6 @@ static msc_irqmap_t msc_eicirqmap[] __initdata = {
static int msc_nr_eicirqs __initdata = ARRAY_SIZE(msc_eicirqmap);
-void __init arch_init_ipiirq(int irq, struct irqaction *action)
-{
- setup_irq(irq, action);
- irq_set_handler(irq, handle_percpu_irq);
-}
-
void __init arch_init_irq(void)
{
int corehi_irq, i8259_irq;
@@ -343,23 +287,10 @@ void __init arch_init_irq(void)
}
i8259_irq = MIPS_GIC_IRQ_BASE + GIC_INT_I8259A;
corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
+ } else if (cpu_has_veic) {
+ set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch);
+ corehi_irq = MSC01E_INT_BASE + MSC01E_INT_COREHI;
} else {
-#if defined(CONFIG_MIPS_MT_SMP)
- /* set up ipi interrupts */
- if (cpu_has_veic) {
- set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch);
- set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch);
- cpu_ipi_resched_irq = MSC01E_INT_SW0;
- cpu_ipi_call_irq = MSC01E_INT_SW1;
- } else {
- cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE +
- MIPS_CPU_IPI_RESCHED_IRQ;
- cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE +
- MIPS_CPU_IPI_CALL_IRQ;
- }
- arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched);
- arch_init_ipiirq(cpu_ipi_call_irq, &irq_call);
-#endif
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_I8259A,
malta_hw0_irqdispatch);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 19/26] MIPS: Stengthen IPI IRQ domain sanity check
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, linux-kernel, Thomas Gleixner, James Hogan, Qais Yousef
Commit fbde2d7d8290 ("MIPS: Add generic SMP IPI support") introduced a
sanity check that an IPI IRQ domain can be found during boot, in order
to ensure that IPIs are able to be set up in systems using such domains.
However it was added at a point where systems may have used an IPI IRQ
domain in some situations but not others, and we could not know which
were the case until runtime, so commit 578bffc82ec5 ("MIPS: Don't BUG_ON
when no IPI domain is found") made that check simply skip IPI init if no
domain were found in order to fix the boot for systems such as QEMU
Malta.
We now use IPI IRQ domains for the MIPS CPU interrupt controller, which
means systems which make use of IPI IRQ domains will always do so when
running on multiple CPUs. As a result we now strengthen the sanity check
to ensure that an IPI IRQ domain is found when multiple CPUs are present
in the system.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/kernel/smp.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index f95f094..0155e85 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -257,16 +257,20 @@ static int __init mips_smp_ipi_init(void)
ipidomain = irq_find_matching_host(NULL, DOMAIN_BUS_IPI);
/*
- * There are systems which only use IPI domains some of the time,
- * depending upon configuration we don't know until runtime. An
- * example is Malta where we may compile in support for GIC & the
- * MT ASE, but run on a system which has multiple VPEs in a single
- * core and doesn't include a GIC. Until all IPI implementations
- * have been converted to use IPI domains the best we can do here
- * is to return & hope some other code sets up the IPIs.
+ * There are systems which use IPI IRQ domains, but only have one
+ * registered when some runtime condition is met. For example a Malta
+ * kernel may include support for GIC & CPU interrupt controller IPI
+ * IRQ domains, but if run on a system with no GIC & no MT ASE then
+ * neither will be supported or registered.
+ *
+ * We only have a problem if we're actually using multiple CPUs so fail
+ * loudly if that is the case. Otherwise simply return, skipping IPI
+ * setup, if we're running with only a single CPU.
*/
- if (!ipidomain)
+ if (!ipidomain) {
+ BUG_ON(num_present_cpus() > 1);
return 0;
+ }
call_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
BUG_ON(!call_virq);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 19/26] MIPS: Stengthen IPI IRQ domain sanity check
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, linux-kernel, Thomas Gleixner, James Hogan, Qais Yousef
Commit fbde2d7d8290 ("MIPS: Add generic SMP IPI support") introduced a
sanity check that an IPI IRQ domain can be found during boot, in order
to ensure that IPIs are able to be set up in systems using such domains.
However it was added at a point where systems may have used an IPI IRQ
domain in some situations but not others, and we could not know which
were the case until runtime, so commit 578bffc82ec5 ("MIPS: Don't BUG_ON
when no IPI domain is found") made that check simply skip IPI init if no
domain were found in order to fix the boot for systems such as QEMU
Malta.
We now use IPI IRQ domains for the MIPS CPU interrupt controller, which
means systems which make use of IPI IRQ domains will always do so when
running on multiple CPUs. As a result we now strengthen the sanity check
to ensure that an IPI IRQ domain is found when multiple CPUs are present
in the system.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/kernel/smp.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index f95f094..0155e85 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -257,16 +257,20 @@ static int __init mips_smp_ipi_init(void)
ipidomain = irq_find_matching_host(NULL, DOMAIN_BUS_IPI);
/*
- * There are systems which only use IPI domains some of the time,
- * depending upon configuration we don't know until runtime. An
- * example is Malta where we may compile in support for GIC & the
- * MT ASE, but run on a system which has multiple VPEs in a single
- * core and doesn't include a GIC. Until all IPI implementations
- * have been converted to use IPI domains the best we can do here
- * is to return & hope some other code sets up the IPIs.
+ * There are systems which use IPI IRQ domains, but only have one
+ * registered when some runtime condition is met. For example a Malta
+ * kernel may include support for GIC & CPU interrupt controller IPI
+ * IRQ domains, but if run on a system with no GIC & no MT ASE then
+ * neither will be supported or registered.
+ *
+ * We only have a problem if we're actually using multiple CPUs so fail
+ * loudly if that is the case. Otherwise simply return, skipping IPI
+ * setup, if we're running with only a single CPU.
*/
- if (!ipidomain)
+ if (!ipidomain) {
+ BUG_ON(num_present_cpus() > 1);
return 0;
+ }
call_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
BUG_ON(!call_virq);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 20/26] MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Paolo Bonzini, linux-kernel, James Hogan
On MIPS64 we define the default CAC_BASE as one of the xkphys regions of
the virtual address space. Since the CCA is encoded in bits 61:59 of
xkphys addresses, fixing CAC_BASE to any particular one prevents us from
dynamically changing the CCA as we do for MIPS32 where CAC_BASE is
placed within kseg0. In order to make the kernel more generic, drop the
current kludge that gives CAC_BASE CCA=3 if CONFIG_DMA_NONCOHERENT is
selected (disregarding CONFIG_DMA_MAYBE_COHERENT) & CCA=5 (which is not
standardised by the architecture) otherwise. Instead read Config.K0 and
generate the appropriate offset into xkphys, presuming that either the
bootloader or early kernel code will have configured Config.K0
appropriately. This seems like the best option for a generic
implementation.
The ip27 spaces.h is adjusted to set its former value of CAC_BASE, since
it's the only user of CAC_BASE from assembly (in its smp_slave_setup
macro). This allows the generic case to focus solely on C code without
breaking ip27.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/include/asm/addrspace.h | 3 +--
arch/mips/include/asm/mach-generic/spaces.h | 8 +++-----
arch/mips/include/asm/mach-ip27/spaces.h | 1 +
3 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index c5b04e7..4856adc 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -126,8 +126,7 @@
#define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p))
#define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p))
#define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK)
-#define PHYS_TO_XKPHYS(cm, a) (_CONST64_(0x8000000000000000) | \
- (_CONST64_(cm) << 59) | (a))
+#define PHYS_TO_XKPHYS(cm, a) (XKPHYS | (_ACAST64_(cm) << 59) | (a))
/*
* The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
index afc96ec..952b0fd 100644
--- a/arch/mips/include/asm/mach-generic/spaces.h
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -12,6 +12,8 @@
#include <linux/const.h>
+#include <asm/mipsregs.h>
+
/*
* This gives the physical RAM offset.
*/
@@ -52,11 +54,7 @@
#ifdef CONFIG_64BIT
#ifndef CAC_BASE
-#ifdef CONFIG_DMA_NONCOHERENT
-#define CAC_BASE _AC(0x9800000000000000, UL)
-#else
-#define CAC_BASE _AC(0xa800000000000000, UL)
-#endif
+#define CAC_BASE PHYS_TO_XKPHYS(read_c0_config() & CONF_CM_CMASK, 0)
#endif
#ifndef IO_BASE
diff --git a/arch/mips/include/asm/mach-ip27/spaces.h b/arch/mips/include/asm/mach-ip27/spaces.h
index b18802a..4775a11 100644
--- a/arch/mips/include/asm/mach-ip27/spaces.h
+++ b/arch/mips/include/asm/mach-ip27/spaces.h
@@ -19,6 +19,7 @@
#define IO_BASE 0x9200000000000000
#define MSPEC_BASE 0x9400000000000000
#define UNCAC_BASE 0x9600000000000000
+#define CAC_BASE 0xa800000000000000
#define TO_MSPEC(x) (MSPEC_BASE | ((x) & TO_PHYS_MASK))
#define TO_HSPEC(x) (HSPEC_BASE | ((x) & TO_PHYS_MASK))
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 20/26] MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Paolo Bonzini, linux-kernel, James Hogan
On MIPS64 we define the default CAC_BASE as one of the xkphys regions of
the virtual address space. Since the CCA is encoded in bits 61:59 of
xkphys addresses, fixing CAC_BASE to any particular one prevents us from
dynamically changing the CCA as we do for MIPS32 where CAC_BASE is
placed within kseg0. In order to make the kernel more generic, drop the
current kludge that gives CAC_BASE CCA=3 if CONFIG_DMA_NONCOHERENT is
selected (disregarding CONFIG_DMA_MAYBE_COHERENT) & CCA=5 (which is not
standardised by the architecture) otherwise. Instead read Config.K0 and
generate the appropriate offset into xkphys, presuming that either the
bootloader or early kernel code will have configured Config.K0
appropriately. This seems like the best option for a generic
implementation.
The ip27 spaces.h is adjusted to set its former value of CAC_BASE, since
it's the only user of CAC_BASE from assembly (in its smp_slave_setup
macro). This allows the generic case to focus solely on C code without
breaking ip27.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/include/asm/addrspace.h | 3 +--
arch/mips/include/asm/mach-generic/spaces.h | 8 +++-----
arch/mips/include/asm/mach-ip27/spaces.h | 1 +
3 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index c5b04e7..4856adc 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -126,8 +126,7 @@
#define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p))
#define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p))
#define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK)
-#define PHYS_TO_XKPHYS(cm, a) (_CONST64_(0x8000000000000000) | \
- (_CONST64_(cm) << 59) | (a))
+#define PHYS_TO_XKPHYS(cm, a) (XKPHYS | (_ACAST64_(cm) << 59) | (a))
/*
* The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
index afc96ec..952b0fd 100644
--- a/arch/mips/include/asm/mach-generic/spaces.h
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -12,6 +12,8 @@
#include <linux/const.h>
+#include <asm/mipsregs.h>
+
/*
* This gives the physical RAM offset.
*/
@@ -52,11 +54,7 @@
#ifdef CONFIG_64BIT
#ifndef CAC_BASE
-#ifdef CONFIG_DMA_NONCOHERENT
-#define CAC_BASE _AC(0x9800000000000000, UL)
-#else
-#define CAC_BASE _AC(0xa800000000000000, UL)
-#endif
+#define CAC_BASE PHYS_TO_XKPHYS(read_c0_config() & CONF_CM_CMASK, 0)
#endif
#ifndef IO_BASE
diff --git a/arch/mips/include/asm/mach-ip27/spaces.h b/arch/mips/include/asm/mach-ip27/spaces.h
index b18802a..4775a11 100644
--- a/arch/mips/include/asm/mach-ip27/spaces.h
+++ b/arch/mips/include/asm/mach-ip27/spaces.h
@@ -19,6 +19,7 @@
#define IO_BASE 0x9200000000000000
#define MSPEC_BASE 0x9400000000000000
#define UNCAC_BASE 0x9600000000000000
+#define CAC_BASE 0xa800000000000000
#define TO_MSPEC(x) (MSPEC_BASE | ((x) & TO_PHYS_MASK))
#define TO_HSPEC(x) (HSPEC_BASE | ((x) & TO_PHYS_MASK))
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 21/26] MIPS: Support generating Flattened Image Trees (.itb)
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle; +Cc: Paul Burton, linux-kernel
Add support for generating kernel images in the Flattened Image Tree
(.itb) format as supported by U-Boot. This format is essentially a
Flattened Device Tree binary containing images (kernels, DTBs, ramdisks)
and configurations which link those images together. The big advantages
of FIT images over the uImage format are:
- We can include FDTs in the kernel image in a way that the bootloader
can extract it & manipulate it before providing it to the kernel.
Thus we can ship FDTs as part of the kernel giving us the advantages
of being able to develop & maintain the DT within the kernel tree,
but also have the benefits of the bootloader being able to
manipulate the FDT. Example uses for this would be to inject the
kernel command line into the chosen node, or to fill in the correct
memory size.
- We can include multiple configurations in a single kernel image.
This means that a single FIT image can, given appropriate
bootloaders, be booted on different boards with the bootloader
selecting an appropriate configuration & providing the correct FDT
to the kernel.
- We can support a multitude of hashes over the data.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/Makefile | 8 ++++++-
arch/mips/boot/Makefile | 57 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 64 insertions(+), 1 deletion(-)
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index efd7a9d..d968ec0 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -266,7 +266,8 @@ KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \
- VMLINUX_ENTRY_ADDRESS=$(entry-y)
+ VMLINUX_ENTRY_ADDRESS=$(entry-y) \
+ PLATFORM=$(platform-y)
LDFLAGS += -m $(ld-emul)
@@ -306,6 +307,11 @@ boot-y += uImage.gz
boot-y += uImage.lzma
boot-y += uImage.lzo
endif
+boot-y += vmlinux.itb
+boot-y += vmlinux.gz.itb
+boot-y += vmlinux.bz2.itb
+boot-y += vmlinux.lzma.itb
+boot-y += vmlinux.lzo.itb
# compressed boot image targets (arch/mips/boot/compressed/)
bootz-y := vmlinuz
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index acb1988..ed65663 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -100,3 +100,60 @@ $(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo FORCE
$(obj)/uImage: $(obj)/uImage.$(suffix-y)
@ln -sf $(notdir $<) $@
@echo ' Image $@ is ready'
+
+#
+# Flattened Image Tree (.itb) images
+#
+
+targets += vmlinux.itb
+targets += vmlinux.gz.itb
+targets += vmlinux.bz2.itb
+targets += vmlinux.lzma.itb
+targets += vmlinux.lzo.itb
+
+quiet_cmd_cpp_its_S = ITS $@
+ cmd_cpp_its_S = $(CPP) $(cpp_flags) -P -C -o $@ $< \
+ -DKERNEL_NAME="\"Linux $(KERNELRELEASE)\"" \
+ -DVMLINUX_BINARY="\"$(3)\"" \
+ -DVMLINUX_COMPRESSION="\"$(2)\"" \
+ -DVMLINUX_LOAD_ADDRESS=$(VMLINUX_LOAD_ADDRESS) \
+ -DVMLINUX_ENTRY_ADDRESS=$(VMLINUX_ENTRY_ADDRESS)
+
+$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,none,vmlinux.bin)
+
+$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,gzip,vmlinux.bin.gz)
+
+$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,bzip2,vmlinux.bin.bz2)
+
+$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,lzma,vmlinux.bin.lzma)
+
+$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,lzo,vmlinux.bin.lzo)
+
+quiet_cmd_itb-image = ITB $@
+ cmd_itb-image = \
+ env PATH="$(objtree)/scripts/dtc:$(PATH)" \
+ $(CONFIG_SHELL) $(MKIMAGE) \
+ -D "-I dts -O dtb -p 500 \
+ --include $(objtree)/arch/mips \
+ --warning no-unit_address_vs_reg" \
+ -f $(2) $@
+
+$(obj)/vmlinux.itb: $(obj)/vmlinux.its $(obj)/vmlinux.bin FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.gz.itb: $(obj)/vmlinux.gz.its $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.bz2.itb: $(obj)/vmlinux.bz2.its $(obj)/vmlinux.bin.bz2 FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.lzma.itb: $(obj)/vmlinux.lzma.its $(obj)/vmlinux.bin.lzma FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.lzo.itb: $(obj)/vmlinux.lzo.its $(obj)/vmlinux.bin.lzo FORCE
+ $(call if_changed,itb-image,$<)
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 21/26] MIPS: Support generating Flattened Image Trees (.itb)
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle; +Cc: Paul Burton, linux-kernel
Add support for generating kernel images in the Flattened Image Tree
(.itb) format as supported by U-Boot. This format is essentially a
Flattened Device Tree binary containing images (kernels, DTBs, ramdisks)
and configurations which link those images together. The big advantages
of FIT images over the uImage format are:
- We can include FDTs in the kernel image in a way that the bootloader
can extract it & manipulate it before providing it to the kernel.
Thus we can ship FDTs as part of the kernel giving us the advantages
of being able to develop & maintain the DT within the kernel tree,
but also have the benefits of the bootloader being able to
manipulate the FDT. Example uses for this would be to inject the
kernel command line into the chosen node, or to fill in the correct
memory size.
- We can include multiple configurations in a single kernel image.
This means that a single FIT image can, given appropriate
bootloaders, be booted on different boards with the bootloader
selecting an appropriate configuration & providing the correct FDT
to the kernel.
- We can support a multitude of hashes over the data.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/Makefile | 8 ++++++-
arch/mips/boot/Makefile | 57 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 64 insertions(+), 1 deletion(-)
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index efd7a9d..d968ec0 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -266,7 +266,8 @@ KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \
- VMLINUX_ENTRY_ADDRESS=$(entry-y)
+ VMLINUX_ENTRY_ADDRESS=$(entry-y) \
+ PLATFORM=$(platform-y)
LDFLAGS += -m $(ld-emul)
@@ -306,6 +307,11 @@ boot-y += uImage.gz
boot-y += uImage.lzma
boot-y += uImage.lzo
endif
+boot-y += vmlinux.itb
+boot-y += vmlinux.gz.itb
+boot-y += vmlinux.bz2.itb
+boot-y += vmlinux.lzma.itb
+boot-y += vmlinux.lzo.itb
# compressed boot image targets (arch/mips/boot/compressed/)
bootz-y := vmlinuz
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index acb1988..ed65663 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -100,3 +100,60 @@ $(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo FORCE
$(obj)/uImage: $(obj)/uImage.$(suffix-y)
@ln -sf $(notdir $<) $@
@echo ' Image $@ is ready'
+
+#
+# Flattened Image Tree (.itb) images
+#
+
+targets += vmlinux.itb
+targets += vmlinux.gz.itb
+targets += vmlinux.bz2.itb
+targets += vmlinux.lzma.itb
+targets += vmlinux.lzo.itb
+
+quiet_cmd_cpp_its_S = ITS $@
+ cmd_cpp_its_S = $(CPP) $(cpp_flags) -P -C -o $@ $< \
+ -DKERNEL_NAME="\"Linux $(KERNELRELEASE)\"" \
+ -DVMLINUX_BINARY="\"$(3)\"" \
+ -DVMLINUX_COMPRESSION="\"$(2)\"" \
+ -DVMLINUX_LOAD_ADDRESS=$(VMLINUX_LOAD_ADDRESS) \
+ -DVMLINUX_ENTRY_ADDRESS=$(VMLINUX_ENTRY_ADDRESS)
+
+$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,none,vmlinux.bin)
+
+$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,gzip,vmlinux.bin.gz)
+
+$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,bzip2,vmlinux.bin.bz2)
+
+$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,lzma,vmlinux.bin.lzma)
+
+$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+ $(call if_changed_dep,cpp_its_S,lzo,vmlinux.bin.lzo)
+
+quiet_cmd_itb-image = ITB $@
+ cmd_itb-image = \
+ env PATH="$(objtree)/scripts/dtc:$(PATH)" \
+ $(CONFIG_SHELL) $(MKIMAGE) \
+ -D "-I dts -O dtb -p 500 \
+ --include $(objtree)/arch/mips \
+ --warning no-unit_address_vs_reg" \
+ -f $(2) $@
+
+$(obj)/vmlinux.itb: $(obj)/vmlinux.its $(obj)/vmlinux.bin FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.gz.itb: $(obj)/vmlinux.gz.its $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.bz2.itb: $(obj)/vmlinux.bz2.its $(obj)/vmlinux.bin.bz2 FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.lzma.itb: $(obj)/vmlinux.lzma.its $(obj)/vmlinux.bin.lzma FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.lzo.itb: $(obj)/vmlinux.lzo.its $(obj)/vmlinux.bin.lzo FORCE
+ $(call if_changed,itb-image,$<)
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 22/26] MIPS: generic: Introduce generic DT-based board support
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle; +Cc: Paul Burton, linux-kernel
Introduce a "generic" platform, which aims to be board-agnostic by
making use of device trees passed by the boot protocol defined in the
MIPS UHI (Universal Hosting Interface) specification. Provision is made
for supporting boards which use a legacy boot protocol that can't be
changed, but adding support for such boards or any others is left to
followon patches.
Right now the built kernels expect to be loaded to 0x80100000, ie. in
kseg0. This is fine for the vast majority of MIPS platforms, but
nevertheless it would be good to remove this limitation in the future by
mapping the kernel via the TLB such that it can be loaded anywhere & map
itself appropriately.
Configuration is handled by dynamically generating configs using
scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc
makes use of it. This allows for variations upon the configuration, eg.
differing architecture revisions or subsets of driver support for
differing boards, to be handled without having a large number of
defconfig files.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2:
- Select MIPS_L1_CACHE_SHIFT_7 to be conservative.
- Don't warn about SMP init failure - register_up_smp_ops will always succeed for SMP kernels & we don't care if it fails on UP kernels.
- Improve generic_defconfig & 64 bit config fragments.
arch/mips/Kbuild.platforms | 1 +
arch/mips/Kconfig | 52 +++++++++
arch/mips/Makefile | 56 ++++++++++
arch/mips/boot/Makefile | 11 +-
arch/mips/configs/generic/32r1.config | 2 +
arch/mips/configs/generic/32r2.config | 3 +
arch/mips/configs/generic/32r6.config | 2 +
arch/mips/configs/generic/64r1.config | 4 +
arch/mips/configs/generic/64r2.config | 5 +
arch/mips/configs/generic/64r6.config | 4 +
arch/mips/configs/generic/eb.config | 1 +
arch/mips/configs/generic/el.config | 1 +
arch/mips/configs/generic/micro32r2.config | 4 +
arch/mips/configs/generic_defconfig | 96 ++++++++++++++++
arch/mips/generic/Kconfig | 12 ++
arch/mips/generic/Makefile | 13 +++
arch/mips/generic/Platform | 14 +++
arch/mips/generic/init.c | 172 +++++++++++++++++++++++++++++
arch/mips/generic/irq.c | 64 +++++++++++
arch/mips/generic/proc.c | 29 +++++
arch/mips/generic/vmlinux.its.S | 31 ++++++
arch/mips/include/asm/machine.h | 63 +++++++++++
22 files changed, 639 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/configs/generic/32r1.config
create mode 100644 arch/mips/configs/generic/32r2.config
create mode 100644 arch/mips/configs/generic/32r6.config
create mode 100644 arch/mips/configs/generic/64r1.config
create mode 100644 arch/mips/configs/generic/64r2.config
create mode 100644 arch/mips/configs/generic/64r6.config
create mode 100644 arch/mips/configs/generic/eb.config
create mode 100644 arch/mips/configs/generic/el.config
create mode 100644 arch/mips/configs/generic/micro32r2.config
create mode 100644 arch/mips/configs/generic_defconfig
create mode 100644 arch/mips/generic/Kconfig
create mode 100644 arch/mips/generic/Makefile
create mode 100644 arch/mips/generic/Platform
create mode 100644 arch/mips/generic/init.c
create mode 100644 arch/mips/generic/irq.c
create mode 100644 arch/mips/generic/proc.c
create mode 100644 arch/mips/generic/vmlinux.its.S
create mode 100644 arch/mips/include/asm/machine.h
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index c5cd63a..9c1e8f9 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -11,6 +11,7 @@ platforms += cavium-octeon
platforms += cobalt
platforms += dec
platforms += emma
+platforms += generic
platforms += jazz
platforms += jz4740
platforms += lantiq
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 49eb902..92a3e37 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -72,6 +72,57 @@ choice
prompt "System type"
default SGI_IP22
+config MIPS_GENERIC
+ bool "Generic board-agnostic MIPS kernel"
+ select BOOT_RAW
+ select BUILTIN_DTB
+ select CEVT_R4K
+ select CLKSRC_MIPS_GIC
+ select COMMON_CLK
+ select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_IRQ_EI
+ select CSRC_R4K
+ select DMA_PERDEV_COHERENT
+ select HW_HAS_PCI
+ select IRQ_MIPS_CPU
+ select LIBFDT
+ select MIPS_CPU_SCACHE
+ select MIPS_GIC
+ select MIPS_L1_CACHE_SHIFT_7
+ select NO_EXCEPT_FILL
+ select PCI_DRIVERS_GENERIC
+ select PINCTRL
+ select SMP_UP if SMP
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS32_R6
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_MIPS64_R2
+ select SYS_HAS_CPU_MIPS64_R6
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MICROMIPS
+ select SYS_SUPPORTS_MIPS_CPS
+ select SYS_SUPPORTS_MIPS16
+ select SYS_SUPPORTS_MULTITHREADING
+ select SYS_SUPPORTS_RELOCATABLE
+ select SYS_SUPPORTS_SMARTMIPS
+ select USB_EHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+ select USB_EHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+ select USB_OHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+ select USB_OHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+ select USB_UHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+ select USB_UHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+ select USE_OF
+ help
+ Select this to build a kernel which aims to support multiple boards,
+ generally using a flattened device tree passed from the bootloader
+ using the boot protocol defined in the UHI (Unified Hosting
+ Interface) specification.
+
config MIPS_ALCHEMY
bool "Alchemy processor based machines"
select ARCH_PHYS_ADDR_T_64BIT
@@ -987,6 +1038,7 @@ source "arch/mips/ath79/Kconfig"
source "arch/mips/bcm47xx/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/bmips/Kconfig"
+source "arch/mips/generic/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d968ec0..a3e8e4c 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -268,6 +268,12 @@ KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \
VMLINUX_ENTRY_ADDRESS=$(entry-y) \
PLATFORM=$(platform-y)
+ifdef CONFIG_32BIT
+bootvars-y += ADDR_BITS=32
+endif
+ifdef CONFIG_64BIT
+bootvars-y += ADDR_BITS=64
+endif
LDFLAGS += -m $(ld-emul)
@@ -435,4 +441,54 @@ define archhelp
echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo
echo ' These will be default as appropriate for a configured platform.'
+ echo
+ echo ' If you are targetting a system supported by generic kernels you may'
+ echo ' configure the kernel for a given architecture target like so:'
+ echo
+ echo ' {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">'
+ echo
+ echo ' Otherwise, the following default configurations are available:'
endef
+
+generic_config_dir = $(srctree)/arch/$(ARCH)/configs/generic
+generic_defconfigs :=
+
+#
+# If the user generates a generic kernel configuration without specifying a
+# list of boards to include the config fragments for, default to including all
+# available board config fragments.
+#
+ifeq ($(BOARDS),)
+BOARDS = $(patsubst board-%.config,%,$(notdir $(wildcard $(generic_config_dir)/board-*.config)))
+endif
+
+#
+# Generic kernel configurations which merge generic_defconfig with the
+# appropriate config fragments from arch/mips/configs/generic/, resulting in
+# the ability to easily configure the kernel for a given architecture,
+# endianness & set of boards without duplicating the needed configuration in
+# hundreds of defconfig files.
+#
+define gen_generic_defconfigs
+$(foreach bits,$(1),$(foreach rev,$(2),$(foreach endian,$(3),
+target := $(bits)$(rev)$(filter el,$(endian))_defconfig
+generic_defconfigs += $$(target)
+$$(target): $(generic_config_dir)/$(bits)$(rev).config
+$$(target): $(generic_config_dir)/$(endian).config
+)))
+endef
+
+$(eval $(call gen_generic_defconfigs,32 64,r1 r2 r6,eb el))
+$(eval $(call gen_generic_defconfigs,micro32,r2,eb el))
+
+.PHONY: $(generic_defconfigs)
+$(generic_defconfigs):
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
+ -m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/generic_defconfig $^ \
+ $(foreach board,$(BOARDS),$(generic_config_dir)/board-$(board).config)
+ $(Q)$(MAKE) olddefconfig
+
+#
+# Prevent generic merge_config rules attempting to merge single fragments
+#
+$(generic_config_dir)/%.config: ;
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index ed65663..2728a9a 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -111,13 +111,22 @@ targets += vmlinux.bz2.itb
targets += vmlinux.lzma.itb
targets += vmlinux.lzo.itb
+ifeq ($(ADDR_BITS),32)
+ itb_addr_cells = 1
+endif
+ifeq ($(ADDR_BITS),64)
+ itb_addr_cells = 2
+endif
+
quiet_cmd_cpp_its_S = ITS $@
cmd_cpp_its_S = $(CPP) $(cpp_flags) -P -C -o $@ $< \
-DKERNEL_NAME="\"Linux $(KERNELRELEASE)\"" \
-DVMLINUX_BINARY="\"$(3)\"" \
-DVMLINUX_COMPRESSION="\"$(2)\"" \
-DVMLINUX_LOAD_ADDRESS=$(VMLINUX_LOAD_ADDRESS) \
- -DVMLINUX_ENTRY_ADDRESS=$(VMLINUX_ENTRY_ADDRESS)
+ -DVMLINUX_ENTRY_ADDRESS=$(VMLINUX_ENTRY_ADDRESS) \
+ -DADDR_BITS=$(ADDR_BITS) \
+ -DADDR_CELLS=$(itb_addr_cells)
$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
$(call if_changed_dep,cpp_its_S,none,vmlinux.bin)
diff --git a/arch/mips/configs/generic/32r1.config b/arch/mips/configs/generic/32r1.config
new file mode 100644
index 0000000..a11cd87
--- /dev/null
+++ b/arch/mips/configs/generic/32r1.config
@@ -0,0 +1,2 @@
+CONFIG_CPU_MIPS32_R1=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic/32r2.config b/arch/mips/configs/generic/32r2.config
new file mode 100644
index 0000000..9570672
--- /dev/null
+++ b/arch/mips/configs/generic/32r2.config
@@ -0,0 +1,3 @@
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic/32r6.config b/arch/mips/configs/generic/32r6.config
new file mode 100644
index 0000000..ca606e7
--- /dev/null
+++ b/arch/mips/configs/generic/32r6.config
@@ -0,0 +1,2 @@
+CONFIG_CPU_MIPS32_R6=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic/64r1.config b/arch/mips/configs/generic/64r1.config
new file mode 100644
index 0000000..7c1ea7e
--- /dev/null
+++ b/arch/mips/configs/generic/64r1.config
@@ -0,0 +1,4 @@
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
diff --git a/arch/mips/configs/generic/64r2.config b/arch/mips/configs/generic/64r2.config
new file mode 100644
index 0000000..b4d31ae
--- /dev/null
+++ b/arch/mips/configs/generic/64r2.config
@@ -0,0 +1,5 @@
+CONFIG_CPU_MIPS64_R2=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
diff --git a/arch/mips/configs/generic/64r6.config b/arch/mips/configs/generic/64r6.config
new file mode 100644
index 0000000..7cac033
--- /dev/null
+++ b/arch/mips/configs/generic/64r6.config
@@ -0,0 +1,4 @@
+CONFIG_CPU_MIPS64_R6=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
diff --git a/arch/mips/configs/generic/eb.config b/arch/mips/configs/generic/eb.config
new file mode 100644
index 0000000..c5cdc99
--- /dev/null
+++ b/arch/mips/configs/generic/eb.config
@@ -0,0 +1 @@
+CONFIG_CPU_BIG_ENDIAN=y
diff --git a/arch/mips/configs/generic/el.config b/arch/mips/configs/generic/el.config
new file mode 100644
index 0000000..ee43fdb
--- /dev/null
+++ b/arch/mips/configs/generic/el.config
@@ -0,0 +1 @@
+CONFIG_CPU_LITTLE_ENDIAN=y
diff --git a/arch/mips/configs/generic/micro32r2.config b/arch/mips/configs/generic/micro32r2.config
new file mode 100644
index 0000000..b701fe7
--- /dev/null
+++ b/arch/mips/configs/generic/micro32r2.config
@@ -0,0 +1,4 @@
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MICROMIPS=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
new file mode 100644
index 0000000..c95d94c
--- /dev/null
+++ b/arch/mips/configs/generic_defconfig
@@ -0,0 +1,96 @@
+CONFIG_MIPS_GENERIC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_MIPS_CPS=y
+CONFIG_CPU_HAS_MSA=y
+CONFIG_HIGHMEM=y
+CONFIG_NR_CPUS=2
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_USERFAULTFD=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_TRIM_UNUSED_KSYMS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_SCSI=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_EXT4_ENCRYPTION=y
+CONFIG_FANOTIFY=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_OVERLAY_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_REDUCED=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon"
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_SPARC is not set
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
new file mode 100644
index 0000000..baddb06
--- /dev/null
+++ b/arch/mips/generic/Kconfig
@@ -0,0 +1,12 @@
+if MIPS_GENERIC
+
+config LEGACY_BOARDS
+ bool
+ help
+ Select this from your board if the board must use a legacy, non-UHI,
+ boot protocol. This will cause the kernel to scan through the list of
+ supported machines calling their detect functions in turn if the
+ kernel is booted without being provided with an FDT via the UHI
+ boot protocol.
+
+endif
diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile
new file mode 100644
index 0000000..26e6420
--- /dev/null
+++ b/arch/mips/generic/Makefile
@@ -0,0 +1,13 @@
+#
+# Copyright (C) 2016 Imagination Technologies
+# Author: Paul Burton <paul.burton@imgtec.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.
+#
+
+obj-y += init.o
+obj-y += irq.o
+obj-y += proc.o
diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform
new file mode 100644
index 0000000..9a30d69
--- /dev/null
+++ b/arch/mips/generic/Platform
@@ -0,0 +1,14 @@
+#
+# Copyright (C) 2016 Imagination Technologies
+# Author: Paul Burton <paul.burton@imgtec.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.
+#
+
+platform-$(CONFIG_MIPS_GENERIC) += generic/
+cflags-$(CONFIG_MIPS_GENERIC) += -I$(srctree)/arch/mips/include/asm/mach-generic
+load-$(CONFIG_MIPS_GENERIC) += 0xffffffff80100000
+all-$(CONFIG_MIPS_GENERIC) := vmlinux.gz.itb
diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c
new file mode 100644
index 0000000..201c524
--- /dev/null
+++ b/arch/mips/generic/init.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/fw/fw.h>
+#include <asm/irq_cpu.h>
+#include <asm/machine.h>
+#include <asm/mips-cpc.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+#include <asm/time.h>
+
+static __initdata const void *fdt;
+static __initdata const struct mips_machine *mach;
+static __initdata const void *mach_match_data;
+
+void __init prom_init(void)
+{
+ const struct mips_machine *check_mach;
+ const struct of_device_id *match;
+
+ if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) {
+ /*
+ * We booted using the UHI boot protocol, so we have been
+ * provided with the appropriate device tree for the board.
+ * Make use of it & search for any machine struct based upon
+ * the root compatible string.
+ */
+ fdt = (void *)fw_arg1;
+
+ for_each_mips_machine(check_mach) {
+ match = mips_machine_is_compatible(check_mach, fdt);
+ if (match) {
+ mach = check_mach;
+ mach_match_data = match->data;
+ break;
+ }
+ }
+ } else if (IS_ENABLED(CONFIG_LEGACY_BOARDS)) {
+ /*
+ * We weren't booted using the UHI boot protocol, but do
+ * support some number of boards with legacy boot protocols.
+ * Attempt to find the right one.
+ */
+ for_each_mips_machine(check_mach) {
+ if (!check_mach->detect)
+ continue;
+
+ if (!check_mach->detect())
+ continue;
+
+ mach = check_mach;
+ }
+
+ /*
+ * If we don't recognise the machine then we can't continue, so
+ * die here.
+ */
+ BUG_ON(!mach);
+
+ /* Retrieve the machine's FDT */
+ fdt = mach->fdt;
+ }
+
+ BUG_ON(!fdt);
+}
+
+void __init *plat_get_fdt(void)
+{
+ return (void *)fdt;
+}
+
+void __init plat_mem_setup(void)
+{
+ if (mach && mach->fixup_fdt)
+ fdt = mach->fixup_fdt(fdt, mach_match_data);
+
+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ __dt_setup_arch((void *)fdt);
+}
+
+void __init device_tree_init(void)
+{
+ int err;
+
+ unflatten_and_copy_device_tree();
+ mips_cpc_probe();
+
+ err = register_cps_smp_ops();
+ if (err)
+ err = register_up_smp_ops();
+}
+
+void __init plat_time_init(void)
+{
+ struct device_node *np;
+ struct clk *clk;
+
+ of_clk_init(NULL);
+
+ if (!cpu_has_counter) {
+ mips_hpt_frequency = 0;
+ } else if (mach && mach->measure_hpt_freq) {
+ mips_hpt_frequency = mach->measure_hpt_freq();
+ } else {
+ np = of_get_cpu_node(0, NULL);
+ if (!np) {
+ pr_err("Failed to get CPU node\n");
+ return;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+
+ mips_hpt_frequency = clk_get_rate(clk);
+ clk_put(clk);
+
+ switch (boot_cpu_type()) {
+ case CPU_20KC:
+ case CPU_25KF:
+ /* The counter runs at the CPU clock rate */
+ break;
+ default:
+ /* The counter runs at half the CPU clock rate */
+ mips_hpt_frequency /= 2;
+ break;
+ }
+ }
+
+ clocksource_probe();
+}
+
+void __init arch_init_irq(void)
+{
+ if (!cpu_has_veic)
+ mips_cpu_irq_init();
+
+ irqchip_init();
+}
+
+static int __init publish_devices(void)
+{
+ if (!of_have_populated_dt())
+ panic("Device-tree not present");
+
+ if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
+ panic("Failed to populate DT");
+
+ return 0;
+}
+arch_initcall(publish_devices);
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/generic/irq.c b/arch/mips/generic/irq.c
new file mode 100644
index 0000000..14064bd
--- /dev/null
+++ b/arch/mips/generic/irq.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+
+int get_c0_fdc_int(void)
+{
+ int mips_cpu_fdc_irq;
+
+ if (cpu_has_veic)
+ panic("Unimplemented!");
+ else if (gic_present)
+ mips_cpu_fdc_irq = gic_get_c0_fdc_int();
+ else if (cp0_fdc_irq >= 0)
+ mips_cpu_fdc_irq = MIPS_CPU_IRQ_BASE + cp0_fdc_irq;
+ else
+ mips_cpu_fdc_irq = -1;
+
+ return mips_cpu_fdc_irq;
+}
+
+int get_c0_perfcount_int(void)
+{
+ int mips_cpu_perf_irq;
+
+ if (cpu_has_veic)
+ panic("Unimplemented!");
+ else if (gic_present)
+ mips_cpu_perf_irq = gic_get_c0_perfcount_int();
+ else if (cp0_perfcount_irq >= 0)
+ mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+ else
+ mips_cpu_perf_irq = -1;
+
+ return mips_cpu_perf_irq;
+}
+
+unsigned int get_c0_compare_int(void)
+{
+ int mips_cpu_timer_irq;
+
+ if (cpu_has_veic)
+ panic("Unimplemented!");
+ else if (gic_present)
+ mips_cpu_timer_irq = gic_get_c0_compare_int();
+ else
+ mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+
+ return mips_cpu_timer_irq;
+}
diff --git a/arch/mips/generic/proc.c b/arch/mips/generic/proc.c
new file mode 100644
index 0000000..42b3325
--- /dev/null
+++ b/arch/mips/generic/proc.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of.h>
+
+#include <asm/bootinfo.h>
+
+const char *get_system_type(void)
+{
+ const char *str;
+ int err;
+
+ err = of_property_read_string(of_root, "model", &str);
+ if (!err)
+ return str;
+
+ err = of_property_read_string_index(of_root, "compatible", 0, &str);
+ if (!err)
+ return str;
+
+ return "Unknown";
+}
diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
new file mode 100644
index 0000000..f67fbf1
--- /dev/null
+++ b/arch/mips/generic/vmlinux.its.S
@@ -0,0 +1,31 @@
+/dts-v1/;
+
+/ {
+ description = KERNEL_NAME;
+ #address-cells = <ADDR_CELLS>;
+
+ images {
+ kernel@0 {
+ description = KERNEL_NAME;
+ data = /incbin/(VMLINUX_BINARY);
+ type = "kernel";
+ arch = "mips";
+ os = "linux";
+ compression = VMLINUX_COMPRESSION;
+ load = /bits/ ADDR_BITS <VMLINUX_LOAD_ADDRESS>;
+ entry = /bits/ ADDR_BITS <VMLINUX_ENTRY_ADDRESS>;
+ hash@0 {
+ algo = "sha1";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf@default";
+
+ conf@default {
+ description = "Generic Linux kernel";
+ kernel = "kernel@0";
+ };
+ };
+};
diff --git a/arch/mips/include/asm/machine.h b/arch/mips/include/asm/machine.h
new file mode 100644
index 0000000..6b444cd
--- /dev/null
+++ b/arch/mips/include/asm/machine.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_MACHINE_H__
+#define __MIPS_ASM_MACHINE_H__
+
+#include <linux/libfdt.h>
+#include <linux/of.h>
+
+struct mips_machine {
+ const struct of_device_id *matches;
+ const void *fdt;
+ bool (*detect)(void);
+ const void *(*fixup_fdt)(const void *fdt, const void *match_data);
+ unsigned int (*measure_hpt_freq)(void);
+};
+
+extern long __mips_machines_start;
+extern long __mips_machines_end;
+
+#define MIPS_MACHINE(name) \
+ static const struct mips_machine __mips_mach_##name \
+ __used __section(.mips.machines.init)
+
+#define for_each_mips_machine(mach) \
+ for ((mach) = (struct mips_machine *)&__mips_machines_start; \
+ (mach) < (struct mips_machine *)&__mips_machines_end; \
+ (mach)++)
+
+/**
+ * mips_machine_is_compatible() - check if a machine is compatible with an FDT
+ * @mach: the machine struct to check
+ * @fdt: the FDT to check for compatibility with
+ *
+ * Check whether the given machine @mach is compatible with the given flattened
+ * device tree @fdt, based upon the compatibility property of the root node.
+ *
+ * Return: the device id matched if any, else NULL
+ */
+static inline const struct of_device_id *
+mips_machine_is_compatible(const struct mips_machine *mach, const void *fdt)
+{
+ const struct of_device_id *match;
+
+ if (!mach->matches)
+ return NULL;
+
+ for (match = mach->matches; match->compatible; match++) {
+ if (fdt_node_check_compatible(fdt, 0, match->compatible) == 0)
+ return match;
+ }
+
+ return NULL;
+}
+
+#endif /* __MIPS_ASM_MACHINE_H__ */
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 22/26] MIPS: generic: Introduce generic DT-based board support
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle; +Cc: Paul Burton, linux-kernel
Introduce a "generic" platform, which aims to be board-agnostic by
making use of device trees passed by the boot protocol defined in the
MIPS UHI (Universal Hosting Interface) specification. Provision is made
for supporting boards which use a legacy boot protocol that can't be
changed, but adding support for such boards or any others is left to
followon patches.
Right now the built kernels expect to be loaded to 0x80100000, ie. in
kseg0. This is fine for the vast majority of MIPS platforms, but
nevertheless it would be good to remove this limitation in the future by
mapping the kernel via the TLB such that it can be loaded anywhere & map
itself appropriately.
Configuration is handled by dynamically generating configs using
scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc
makes use of it. This allows for variations upon the configuration, eg.
differing architecture revisions or subsets of driver support for
differing boards, to be handled without having a large number of
defconfig files.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2:
- Select MIPS_L1_CACHE_SHIFT_7 to be conservative.
- Don't warn about SMP init failure - register_up_smp_ops will always succeed for SMP kernels & we don't care if it fails on UP kernels.
- Improve generic_defconfig & 64 bit config fragments.
arch/mips/Kbuild.platforms | 1 +
arch/mips/Kconfig | 52 +++++++++
arch/mips/Makefile | 56 ++++++++++
arch/mips/boot/Makefile | 11 +-
arch/mips/configs/generic/32r1.config | 2 +
arch/mips/configs/generic/32r2.config | 3 +
arch/mips/configs/generic/32r6.config | 2 +
arch/mips/configs/generic/64r1.config | 4 +
arch/mips/configs/generic/64r2.config | 5 +
arch/mips/configs/generic/64r6.config | 4 +
arch/mips/configs/generic/eb.config | 1 +
arch/mips/configs/generic/el.config | 1 +
arch/mips/configs/generic/micro32r2.config | 4 +
arch/mips/configs/generic_defconfig | 96 ++++++++++++++++
arch/mips/generic/Kconfig | 12 ++
arch/mips/generic/Makefile | 13 +++
arch/mips/generic/Platform | 14 +++
arch/mips/generic/init.c | 172 +++++++++++++++++++++++++++++
arch/mips/generic/irq.c | 64 +++++++++++
arch/mips/generic/proc.c | 29 +++++
arch/mips/generic/vmlinux.its.S | 31 ++++++
arch/mips/include/asm/machine.h | 63 +++++++++++
22 files changed, 639 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/configs/generic/32r1.config
create mode 100644 arch/mips/configs/generic/32r2.config
create mode 100644 arch/mips/configs/generic/32r6.config
create mode 100644 arch/mips/configs/generic/64r1.config
create mode 100644 arch/mips/configs/generic/64r2.config
create mode 100644 arch/mips/configs/generic/64r6.config
create mode 100644 arch/mips/configs/generic/eb.config
create mode 100644 arch/mips/configs/generic/el.config
create mode 100644 arch/mips/configs/generic/micro32r2.config
create mode 100644 arch/mips/configs/generic_defconfig
create mode 100644 arch/mips/generic/Kconfig
create mode 100644 arch/mips/generic/Makefile
create mode 100644 arch/mips/generic/Platform
create mode 100644 arch/mips/generic/init.c
create mode 100644 arch/mips/generic/irq.c
create mode 100644 arch/mips/generic/proc.c
create mode 100644 arch/mips/generic/vmlinux.its.S
create mode 100644 arch/mips/include/asm/machine.h
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index c5cd63a..9c1e8f9 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -11,6 +11,7 @@ platforms += cavium-octeon
platforms += cobalt
platforms += dec
platforms += emma
+platforms += generic
platforms += jazz
platforms += jz4740
platforms += lantiq
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 49eb902..92a3e37 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -72,6 +72,57 @@ choice
prompt "System type"
default SGI_IP22
+config MIPS_GENERIC
+ bool "Generic board-agnostic MIPS kernel"
+ select BOOT_RAW
+ select BUILTIN_DTB
+ select CEVT_R4K
+ select CLKSRC_MIPS_GIC
+ select COMMON_CLK
+ select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_IRQ_EI
+ select CSRC_R4K
+ select DMA_PERDEV_COHERENT
+ select HW_HAS_PCI
+ select IRQ_MIPS_CPU
+ select LIBFDT
+ select MIPS_CPU_SCACHE
+ select MIPS_GIC
+ select MIPS_L1_CACHE_SHIFT_7
+ select NO_EXCEPT_FILL
+ select PCI_DRIVERS_GENERIC
+ select PINCTRL
+ select SMP_UP if SMP
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS32_R6
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_MIPS64_R2
+ select SYS_HAS_CPU_MIPS64_R6
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MICROMIPS
+ select SYS_SUPPORTS_MIPS_CPS
+ select SYS_SUPPORTS_MIPS16
+ select SYS_SUPPORTS_MULTITHREADING
+ select SYS_SUPPORTS_RELOCATABLE
+ select SYS_SUPPORTS_SMARTMIPS
+ select USB_EHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+ select USB_EHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+ select USB_OHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+ select USB_OHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+ select USB_UHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+ select USB_UHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+ select USE_OF
+ help
+ Select this to build a kernel which aims to support multiple boards,
+ generally using a flattened device tree passed from the bootloader
+ using the boot protocol defined in the UHI (Unified Hosting
+ Interface) specification.
+
config MIPS_ALCHEMY
bool "Alchemy processor based machines"
select ARCH_PHYS_ADDR_T_64BIT
@@ -987,6 +1038,7 @@ source "arch/mips/ath79/Kconfig"
source "arch/mips/bcm47xx/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/bmips/Kconfig"
+source "arch/mips/generic/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d968ec0..a3e8e4c 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -268,6 +268,12 @@ KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \
VMLINUX_ENTRY_ADDRESS=$(entry-y) \
PLATFORM=$(platform-y)
+ifdef CONFIG_32BIT
+bootvars-y += ADDR_BITS=32
+endif
+ifdef CONFIG_64BIT
+bootvars-y += ADDR_BITS=64
+endif
LDFLAGS += -m $(ld-emul)
@@ -435,4 +441,54 @@ define archhelp
echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo
echo ' These will be default as appropriate for a configured platform.'
+ echo
+ echo ' If you are targetting a system supported by generic kernels you may'
+ echo ' configure the kernel for a given architecture target like so:'
+ echo
+ echo ' {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">'
+ echo
+ echo ' Otherwise, the following default configurations are available:'
endef
+
+generic_config_dir = $(srctree)/arch/$(ARCH)/configs/generic
+generic_defconfigs :=
+
+#
+# If the user generates a generic kernel configuration without specifying a
+# list of boards to include the config fragments for, default to including all
+# available board config fragments.
+#
+ifeq ($(BOARDS),)
+BOARDS = $(patsubst board-%.config,%,$(notdir $(wildcard $(generic_config_dir)/board-*.config)))
+endif
+
+#
+# Generic kernel configurations which merge generic_defconfig with the
+# appropriate config fragments from arch/mips/configs/generic/, resulting in
+# the ability to easily configure the kernel for a given architecture,
+# endianness & set of boards without duplicating the needed configuration in
+# hundreds of defconfig files.
+#
+define gen_generic_defconfigs
+$(foreach bits,$(1),$(foreach rev,$(2),$(foreach endian,$(3),
+target := $(bits)$(rev)$(filter el,$(endian))_defconfig
+generic_defconfigs += $$(target)
+$$(target): $(generic_config_dir)/$(bits)$(rev).config
+$$(target): $(generic_config_dir)/$(endian).config
+)))
+endef
+
+$(eval $(call gen_generic_defconfigs,32 64,r1 r2 r6,eb el))
+$(eval $(call gen_generic_defconfigs,micro32,r2,eb el))
+
+.PHONY: $(generic_defconfigs)
+$(generic_defconfigs):
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
+ -m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/generic_defconfig $^ \
+ $(foreach board,$(BOARDS),$(generic_config_dir)/board-$(board).config)
+ $(Q)$(MAKE) olddefconfig
+
+#
+# Prevent generic merge_config rules attempting to merge single fragments
+#
+$(generic_config_dir)/%.config: ;
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index ed65663..2728a9a 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -111,13 +111,22 @@ targets += vmlinux.bz2.itb
targets += vmlinux.lzma.itb
targets += vmlinux.lzo.itb
+ifeq ($(ADDR_BITS),32)
+ itb_addr_cells = 1
+endif
+ifeq ($(ADDR_BITS),64)
+ itb_addr_cells = 2
+endif
+
quiet_cmd_cpp_its_S = ITS $@
cmd_cpp_its_S = $(CPP) $(cpp_flags) -P -C -o $@ $< \
-DKERNEL_NAME="\"Linux $(KERNELRELEASE)\"" \
-DVMLINUX_BINARY="\"$(3)\"" \
-DVMLINUX_COMPRESSION="\"$(2)\"" \
-DVMLINUX_LOAD_ADDRESS=$(VMLINUX_LOAD_ADDRESS) \
- -DVMLINUX_ENTRY_ADDRESS=$(VMLINUX_ENTRY_ADDRESS)
+ -DVMLINUX_ENTRY_ADDRESS=$(VMLINUX_ENTRY_ADDRESS) \
+ -DADDR_BITS=$(ADDR_BITS) \
+ -DADDR_CELLS=$(itb_addr_cells)
$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
$(call if_changed_dep,cpp_its_S,none,vmlinux.bin)
diff --git a/arch/mips/configs/generic/32r1.config b/arch/mips/configs/generic/32r1.config
new file mode 100644
index 0000000..a11cd87
--- /dev/null
+++ b/arch/mips/configs/generic/32r1.config
@@ -0,0 +1,2 @@
+CONFIG_CPU_MIPS32_R1=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic/32r2.config b/arch/mips/configs/generic/32r2.config
new file mode 100644
index 0000000..9570672
--- /dev/null
+++ b/arch/mips/configs/generic/32r2.config
@@ -0,0 +1,3 @@
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic/32r6.config b/arch/mips/configs/generic/32r6.config
new file mode 100644
index 0000000..ca606e7
--- /dev/null
+++ b/arch/mips/configs/generic/32r6.config
@@ -0,0 +1,2 @@
+CONFIG_CPU_MIPS32_R6=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic/64r1.config b/arch/mips/configs/generic/64r1.config
new file mode 100644
index 0000000..7c1ea7e
--- /dev/null
+++ b/arch/mips/configs/generic/64r1.config
@@ -0,0 +1,4 @@
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
diff --git a/arch/mips/configs/generic/64r2.config b/arch/mips/configs/generic/64r2.config
new file mode 100644
index 0000000..b4d31ae
--- /dev/null
+++ b/arch/mips/configs/generic/64r2.config
@@ -0,0 +1,5 @@
+CONFIG_CPU_MIPS64_R2=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
diff --git a/arch/mips/configs/generic/64r6.config b/arch/mips/configs/generic/64r6.config
new file mode 100644
index 0000000..7cac033
--- /dev/null
+++ b/arch/mips/configs/generic/64r6.config
@@ -0,0 +1,4 @@
+CONFIG_CPU_MIPS64_R6=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
diff --git a/arch/mips/configs/generic/eb.config b/arch/mips/configs/generic/eb.config
new file mode 100644
index 0000000..c5cdc99
--- /dev/null
+++ b/arch/mips/configs/generic/eb.config
@@ -0,0 +1 @@
+CONFIG_CPU_BIG_ENDIAN=y
diff --git a/arch/mips/configs/generic/el.config b/arch/mips/configs/generic/el.config
new file mode 100644
index 0000000..ee43fdb
--- /dev/null
+++ b/arch/mips/configs/generic/el.config
@@ -0,0 +1 @@
+CONFIG_CPU_LITTLE_ENDIAN=y
diff --git a/arch/mips/configs/generic/micro32r2.config b/arch/mips/configs/generic/micro32r2.config
new file mode 100644
index 0000000..b701fe7
--- /dev/null
+++ b/arch/mips/configs/generic/micro32r2.config
@@ -0,0 +1,4 @@
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MICROMIPS=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_HIGHMEM=y
diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
new file mode 100644
index 0000000..c95d94c
--- /dev/null
+++ b/arch/mips/configs/generic_defconfig
@@ -0,0 +1,96 @@
+CONFIG_MIPS_GENERIC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_MIPS_CPS=y
+CONFIG_CPU_HAS_MSA=y
+CONFIG_HIGHMEM=y
+CONFIG_NR_CPUS=2
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_USERFAULTFD=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_TRIM_UNUSED_KSYMS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_SCSI=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_EXT4_ENCRYPTION=y
+CONFIG_FANOTIFY=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_OVERLAY_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_REDUCED=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon"
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_SPARC is not set
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
new file mode 100644
index 0000000..baddb06
--- /dev/null
+++ b/arch/mips/generic/Kconfig
@@ -0,0 +1,12 @@
+if MIPS_GENERIC
+
+config LEGACY_BOARDS
+ bool
+ help
+ Select this from your board if the board must use a legacy, non-UHI,
+ boot protocol. This will cause the kernel to scan through the list of
+ supported machines calling their detect functions in turn if the
+ kernel is booted without being provided with an FDT via the UHI
+ boot protocol.
+
+endif
diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile
new file mode 100644
index 0000000..26e6420
--- /dev/null
+++ b/arch/mips/generic/Makefile
@@ -0,0 +1,13 @@
+#
+# Copyright (C) 2016 Imagination Technologies
+# Author: Paul Burton <paul.burton@imgtec.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.
+#
+
+obj-y += init.o
+obj-y += irq.o
+obj-y += proc.o
diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform
new file mode 100644
index 0000000..9a30d69
--- /dev/null
+++ b/arch/mips/generic/Platform
@@ -0,0 +1,14 @@
+#
+# Copyright (C) 2016 Imagination Technologies
+# Author: Paul Burton <paul.burton@imgtec.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.
+#
+
+platform-$(CONFIG_MIPS_GENERIC) += generic/
+cflags-$(CONFIG_MIPS_GENERIC) += -I$(srctree)/arch/mips/include/asm/mach-generic
+load-$(CONFIG_MIPS_GENERIC) += 0xffffffff80100000
+all-$(CONFIG_MIPS_GENERIC) := vmlinux.gz.itb
diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c
new file mode 100644
index 0000000..201c524
--- /dev/null
+++ b/arch/mips/generic/init.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/fw/fw.h>
+#include <asm/irq_cpu.h>
+#include <asm/machine.h>
+#include <asm/mips-cpc.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+#include <asm/time.h>
+
+static __initdata const void *fdt;
+static __initdata const struct mips_machine *mach;
+static __initdata const void *mach_match_data;
+
+void __init prom_init(void)
+{
+ const struct mips_machine *check_mach;
+ const struct of_device_id *match;
+
+ if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) {
+ /*
+ * We booted using the UHI boot protocol, so we have been
+ * provided with the appropriate device tree for the board.
+ * Make use of it & search for any machine struct based upon
+ * the root compatible string.
+ */
+ fdt = (void *)fw_arg1;
+
+ for_each_mips_machine(check_mach) {
+ match = mips_machine_is_compatible(check_mach, fdt);
+ if (match) {
+ mach = check_mach;
+ mach_match_data = match->data;
+ break;
+ }
+ }
+ } else if (IS_ENABLED(CONFIG_LEGACY_BOARDS)) {
+ /*
+ * We weren't booted using the UHI boot protocol, but do
+ * support some number of boards with legacy boot protocols.
+ * Attempt to find the right one.
+ */
+ for_each_mips_machine(check_mach) {
+ if (!check_mach->detect)
+ continue;
+
+ if (!check_mach->detect())
+ continue;
+
+ mach = check_mach;
+ }
+
+ /*
+ * If we don't recognise the machine then we can't continue, so
+ * die here.
+ */
+ BUG_ON(!mach);
+
+ /* Retrieve the machine's FDT */
+ fdt = mach->fdt;
+ }
+
+ BUG_ON(!fdt);
+}
+
+void __init *plat_get_fdt(void)
+{
+ return (void *)fdt;
+}
+
+void __init plat_mem_setup(void)
+{
+ if (mach && mach->fixup_fdt)
+ fdt = mach->fixup_fdt(fdt, mach_match_data);
+
+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ __dt_setup_arch((void *)fdt);
+}
+
+void __init device_tree_init(void)
+{
+ int err;
+
+ unflatten_and_copy_device_tree();
+ mips_cpc_probe();
+
+ err = register_cps_smp_ops();
+ if (err)
+ err = register_up_smp_ops();
+}
+
+void __init plat_time_init(void)
+{
+ struct device_node *np;
+ struct clk *clk;
+
+ of_clk_init(NULL);
+
+ if (!cpu_has_counter) {
+ mips_hpt_frequency = 0;
+ } else if (mach && mach->measure_hpt_freq) {
+ mips_hpt_frequency = mach->measure_hpt_freq();
+ } else {
+ np = of_get_cpu_node(0, NULL);
+ if (!np) {
+ pr_err("Failed to get CPU node\n");
+ return;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+
+ mips_hpt_frequency = clk_get_rate(clk);
+ clk_put(clk);
+
+ switch (boot_cpu_type()) {
+ case CPU_20KC:
+ case CPU_25KF:
+ /* The counter runs at the CPU clock rate */
+ break;
+ default:
+ /* The counter runs at half the CPU clock rate */
+ mips_hpt_frequency /= 2;
+ break;
+ }
+ }
+
+ clocksource_probe();
+}
+
+void __init arch_init_irq(void)
+{
+ if (!cpu_has_veic)
+ mips_cpu_irq_init();
+
+ irqchip_init();
+}
+
+static int __init publish_devices(void)
+{
+ if (!of_have_populated_dt())
+ panic("Device-tree not present");
+
+ if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
+ panic("Failed to populate DT");
+
+ return 0;
+}
+arch_initcall(publish_devices);
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/generic/irq.c b/arch/mips/generic/irq.c
new file mode 100644
index 0000000..14064bd
--- /dev/null
+++ b/arch/mips/generic/irq.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+
+int get_c0_fdc_int(void)
+{
+ int mips_cpu_fdc_irq;
+
+ if (cpu_has_veic)
+ panic("Unimplemented!");
+ else if (gic_present)
+ mips_cpu_fdc_irq = gic_get_c0_fdc_int();
+ else if (cp0_fdc_irq >= 0)
+ mips_cpu_fdc_irq = MIPS_CPU_IRQ_BASE + cp0_fdc_irq;
+ else
+ mips_cpu_fdc_irq = -1;
+
+ return mips_cpu_fdc_irq;
+}
+
+int get_c0_perfcount_int(void)
+{
+ int mips_cpu_perf_irq;
+
+ if (cpu_has_veic)
+ panic("Unimplemented!");
+ else if (gic_present)
+ mips_cpu_perf_irq = gic_get_c0_perfcount_int();
+ else if (cp0_perfcount_irq >= 0)
+ mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+ else
+ mips_cpu_perf_irq = -1;
+
+ return mips_cpu_perf_irq;
+}
+
+unsigned int get_c0_compare_int(void)
+{
+ int mips_cpu_timer_irq;
+
+ if (cpu_has_veic)
+ panic("Unimplemented!");
+ else if (gic_present)
+ mips_cpu_timer_irq = gic_get_c0_compare_int();
+ else
+ mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+
+ return mips_cpu_timer_irq;
+}
diff --git a/arch/mips/generic/proc.c b/arch/mips/generic/proc.c
new file mode 100644
index 0000000..42b3325
--- /dev/null
+++ b/arch/mips/generic/proc.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of.h>
+
+#include <asm/bootinfo.h>
+
+const char *get_system_type(void)
+{
+ const char *str;
+ int err;
+
+ err = of_property_read_string(of_root, "model", &str);
+ if (!err)
+ return str;
+
+ err = of_property_read_string_index(of_root, "compatible", 0, &str);
+ if (!err)
+ return str;
+
+ return "Unknown";
+}
diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
new file mode 100644
index 0000000..f67fbf1
--- /dev/null
+++ b/arch/mips/generic/vmlinux.its.S
@@ -0,0 +1,31 @@
+/dts-v1/;
+
+/ {
+ description = KERNEL_NAME;
+ #address-cells = <ADDR_CELLS>;
+
+ images {
+ kernel@0 {
+ description = KERNEL_NAME;
+ data = /incbin/(VMLINUX_BINARY);
+ type = "kernel";
+ arch = "mips";
+ os = "linux";
+ compression = VMLINUX_COMPRESSION;
+ load = /bits/ ADDR_BITS <VMLINUX_LOAD_ADDRESS>;
+ entry = /bits/ ADDR_BITS <VMLINUX_ENTRY_ADDRESS>;
+ hash@0 {
+ algo = "sha1";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf@default";
+
+ conf@default {
+ description = "Generic Linux kernel";
+ kernel = "kernel@0";
+ };
+ };
+};
diff --git a/arch/mips/include/asm/machine.h b/arch/mips/include/asm/machine.h
new file mode 100644
index 0000000..6b444cd
--- /dev/null
+++ b/arch/mips/include/asm/machine.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_MACHINE_H__
+#define __MIPS_ASM_MACHINE_H__
+
+#include <linux/libfdt.h>
+#include <linux/of.h>
+
+struct mips_machine {
+ const struct of_device_id *matches;
+ const void *fdt;
+ bool (*detect)(void);
+ const void *(*fixup_fdt)(const void *fdt, const void *match_data);
+ unsigned int (*measure_hpt_freq)(void);
+};
+
+extern long __mips_machines_start;
+extern long __mips_machines_end;
+
+#define MIPS_MACHINE(name) \
+ static const struct mips_machine __mips_mach_##name \
+ __used __section(.mips.machines.init)
+
+#define for_each_mips_machine(mach) \
+ for ((mach) = (struct mips_machine *)&__mips_machines_start; \
+ (mach) < (struct mips_machine *)&__mips_machines_end; \
+ (mach)++)
+
+/**
+ * mips_machine_is_compatible() - check if a machine is compatible with an FDT
+ * @mach: the machine struct to check
+ * @fdt: the FDT to check for compatibility with
+ *
+ * Check whether the given machine @mach is compatible with the given flattened
+ * device tree @fdt, based upon the compatibility property of the root node.
+ *
+ * Return: the device id matched if any, else NULL
+ */
+static inline const struct of_device_id *
+mips_machine_is_compatible(const struct mips_machine *mach, const void *fdt)
+{
+ const struct of_device_id *match;
+
+ if (!mach->matches)
+ return NULL;
+
+ for (match = mach->matches; match->compatible; match++) {
+ if (fdt_node_check_compatible(fdt, 0, match->compatible) == 0)
+ return match;
+ }
+
+ return NULL;
+}
+
+#endif /* __MIPS_ASM_MACHINE_H__ */
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 23/26] MIPS: generic: Convert SEAD-3 to a generic board
2016-08-30 17:29 ` Paul Burton
@ 2016-08-30 17:29 ` Paul Burton
-1 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Matt Redfearn, Kefeng Wang, Jacek Anaszewski,
linux-kernel, devicetree, Rob Herring, Mark Rutland
Convert the MIPS SEAD-3 board support to be a generic board, supported
by generic kernels.
Because the SEAD-3 boot protocol was defined long ago and we don't want
to force a switch to the UHI protocol, SEAD-3 is added as a legacy board
which is detected by reading the REVISION register. This may technically
not be a valid memory read & future work will include attempting to
handle that gracefully. In practice since SEAD-3 is the only legacy
board supported by the generic kernel so far the read will only happen
on SEAD-3 boards, and even once Malta is converted the same REVISION
register exists there too. Other boards such as Boston, Ci20 & Ci40 will
use the UHI boot protocol & thus not run any of the legacy board detect
functions.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/Kbuild.platforms | 1 -
arch/mips/Kconfig | 37 +-----
arch/mips/Makefile | 13 +++
arch/mips/boot/dts/mti/Makefile | 2 +-
arch/mips/boot/dts/mti/sead3.dts | 1 +
arch/mips/configs/generic/board-sead-3.config | 32 +++++
arch/mips/configs/sead3_defconfig | 129 ---------------------
arch/mips/configs/sead3micro_defconfig | 122 -------------------
arch/mips/generic/Kconfig | 7 ++
arch/mips/generic/Makefile | 2 +
.../sead3-dtshim.c => generic/board-sead3.c} | 106 +++++++++++++++--
.../include/asm/mach-sead3/cpu-feature-overrides.h | 72 ------------
arch/mips/include/asm/mach-sead3/irq.h | 9 --
.../include/asm/mach-sead3/kernel-entry-init.h | 21 ----
arch/mips/include/asm/mach-sead3/sead3-dtshim.h | 29 -----
arch/mips/include/asm/mach-sead3/war.h | 24 ----
arch/mips/mti-sead3/Makefile | 15 ---
arch/mips/mti-sead3/Platform | 7 --
arch/mips/mti-sead3/sead3-init.c | 100 ----------------
arch/mips/mti-sead3/sead3-int.c | 23 ----
arch/mips/mti-sead3/sead3-setup.c | 39 -------
arch/mips/mti-sead3/sead3-time.c | 91 ---------------
22 files changed, 152 insertions(+), 730 deletions(-)
create mode 100644 arch/mips/configs/generic/board-sead-3.config
delete mode 100644 arch/mips/configs/sead3_defconfig
delete mode 100644 arch/mips/configs/sead3micro_defconfig
rename arch/mips/{mti-sead3/sead3-dtshim.c => generic/board-sead3.c} (72%)
delete mode 100644 arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
delete mode 100644 arch/mips/include/asm/mach-sead3/irq.h
delete mode 100644 arch/mips/include/asm/mach-sead3/kernel-entry-init.h
delete mode 100644 arch/mips/include/asm/mach-sead3/sead3-dtshim.h
delete mode 100644 arch/mips/include/asm/mach-sead3/war.h
delete mode 100644 arch/mips/mti-sead3/Makefile
delete mode 100644 arch/mips/mti-sead3/Platform
delete mode 100644 arch/mips/mti-sead3/sead3-init.c
delete mode 100644 arch/mips/mti-sead3/sead3-int.c
delete mode 100644 arch/mips/mti-sead3/sead3-setup.c
delete mode 100644 arch/mips/mti-sead3/sead3-time.c
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 9c1e8f9..f5f1bdb 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -19,7 +19,6 @@ platforms += lasat
platforms += loongson32
platforms += loongson64
platforms += mti-malta
-platforms += mti-sead3
platforms += netlogic
platforms += paravirt
platforms += pic32
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 92a3e37..7cf522f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -544,41 +544,6 @@ config MACH_PIC32
Microchip PIC32 is a family of general-purpose 32 bit MIPS core
microcontrollers.
-config MIPS_SEAD3
- bool "MIPS SEAD3 board"
- select BOOT_ELF32
- select BOOT_RAW
- select BUILTIN_DTB
- select CEVT_R4K
- select CSRC_R4K
- select CLKSRC_MIPS_GIC
- select COMMON_CLK
- select CPU_MIPSR2_IRQ_VI
- select CPU_MIPSR2_IRQ_EI
- select DMA_NONCOHERENT
- select IRQ_MIPS_CPU
- select MIPS_GIC
- select LIBFDT
- select MIPS_MSC
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_HAS_CPU_MIPS32_R6
- select SYS_HAS_CPU_MIPS64_R1
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_SMARTMIPS
- select SYS_SUPPORTS_MICROMIPS
- select SYS_SUPPORTS_MIPS16
- select SYS_SUPPORTS_RELOCATABLE
- select USB_EHCI_BIG_ENDIAN_DESC
- select USB_EHCI_BIG_ENDIAN_MMIO
- select USE_OF
- help
- This enables support for the MIPS Technologies SEAD3 evaluation
- board.
-
config NEC_MARKEINS
bool "NEC EMMA2RH Mark-eins board"
select SOC_EMMA2RH
@@ -2961,7 +2926,7 @@ endchoice
choice
prompt "Kernel command line type" if !CMDLINE_OVERRIDE
default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
- !MIPS_MALTA && !MIPS_SEAD3 && \
+ !MIPS_MALTA && \
!CAVIUM_OCTEON_SOC
default MIPS_CMDLINE_FROM_BOOTLOADER
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index a3e8e4c..a6334a5 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -492,3 +492,16 @@ $(generic_defconfigs):
# Prevent generic merge_config rules attempting to merge single fragments
#
$(generic_config_dir)/%.config: ;
+
+#
+# Legacy defconfig compatibility - these targets used to be real defconfigs but
+# now that the boards have been converted to use the generic kernel they are
+# wrappers around the generic rules above.
+#
+.PHONY: sead3_defconfig
+sead3_defconfig:
+ $(Q)$(MAKE) 32r2el_defconfig BOARDS=sead-3
+
+.PHONY: sead3micro_defconfig
+sead3micro_defconfig:
+ $(Q)$(MAKE) micro32r2el_defconfig BOARDS=sead-3
diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
index 144d776..fcabd69 100644
--- a/arch/mips/boot/dts/mti/Makefile
+++ b/arch/mips/boot/dts/mti/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_MIPS_MALTA) += malta.dtb
-dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb
+dtb-$(CONFIG_LEGACY_BOARD_SEAD3) += sead3.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
index 2579ca5..b112879 100644
--- a/arch/mips/boot/dts/mti/sead3.dts
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -10,6 +10,7 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "mti,sead-3";
+ model = "MIPS SEAD-3";
interrupt-parent = <&gic>;
chosen {
diff --git a/arch/mips/configs/generic/board-sead-3.config b/arch/mips/configs/generic/board-sead-3.config
new file mode 100644
index 0000000..3b5e1ac
--- /dev/null
+++ b/arch/mips/configs/generic/board-sead-3.config
@@ -0,0 +1,32 @@
+CONFIG_LEGACY_BOARD_SEAD3=y
+
+CONFIG_AUXDISPLAY=y
+CONFIG_IMG_ASCII_LCD=y
+
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
+
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+CONFIG_SMSC_PHY=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/arch/mips/configs/sead3_defconfig b/arch/mips/configs/sead3_defconfig
deleted file mode 100644
index ab4c465..0000000
--- a/arch/mips/configs/sead3_defconfig
+++ /dev/null
@@ -1,129 +0,0 @@
-CONFIG_MIPS_SEAD3=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_HZ_100=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon"
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_OF=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_SPI=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_RESTART=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_SENSORS_ADT7475=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T80=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/configs/sead3micro_defconfig b/arch/mips/configs/sead3micro_defconfig
deleted file mode 100644
index cd91a77..0000000
--- a/arch/mips/configs/sead3micro_defconfig
+++ /dev/null
@@ -1,122 +0,0 @@
-CONFIG_MIPS_SEAD3=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MICROMIPS=y
-CONFIG_HZ_100=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_SPI=y
-CONFIG_SENSORS_ADT7475=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T80=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index baddb06..a606b3f 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -9,4 +9,11 @@ config LEGACY_BOARDS
kernel is booted without being provided with an FDT via the UHI
boot protocol.
+config LEGACY_BOARD_SEAD3
+ bool "Support MIPS SEAD-3 boards"
+ select LEGACY_BOARDS
+ help
+ Enable this to include support for booting on MIPS SEAD-3 FPGA-based
+ development boards, which boot using a legacy boot protocol.
+
endif
diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile
index 26e6420..7c66494 100644
--- a/arch/mips/generic/Makefile
+++ b/arch/mips/generic/Makefile
@@ -11,3 +11,5 @@
obj-y += init.o
obj-y += irq.o
obj-y += proc.o
+
+obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o
diff --git a/arch/mips/mti-sead3/sead3-dtshim.c b/arch/mips/generic/board-sead3.c
similarity index 72%
rename from arch/mips/mti-sead3/sead3-dtshim.c
rename to arch/mips/generic/board-sead3.c
index d6b0708..f4ae058 100644
--- a/arch/mips/mti-sead3/sead3-dtshim.c
+++ b/arch/mips/generic/board-sead3.c
@@ -4,11 +4,11 @@
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
+ * Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
-#define pr_fmt(fmt) "sead3-dtshim: " fmt
+#define pr_fmt(fmt) "sead3: " fmt
#include <linux/errno.h>
#include <linux/libfdt.h>
@@ -16,13 +16,49 @@
#include <asm/fw/fw.h>
#include <asm/io.h>
+#include <asm/machine.h>
#define SEAD_CONFIG CKSEG1ADDR(0x1b100110)
#define SEAD_CONFIG_GIC_PRESENT BIT(1)
-static unsigned char fdt_buf[16 << 10] __initdata;
+#define MIPS_REVISION CKSEG1ADDR(0x1fc00010)
+#define MIPS_REVISION_MACHINE (0xf << 4)
+#define MIPS_REVISION_MACHINE_SEAD3 (0x4 << 4)
-static int append_memory(void *fdt)
+static __init bool sead3_detect(void)
+{
+ uint32_t rev;
+
+ rev = __raw_readl((void *)MIPS_REVISION);
+ return (rev & MIPS_REVISION_MACHINE) == MIPS_REVISION_MACHINE_SEAD3;
+}
+
+static __init int append_cmdline(void *fdt)
+{
+ int err, chosen_off;
+
+ /* find or add chosen node */
+ chosen_off = fdt_path_offset(fdt, "/chosen");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_path_offset(fdt, "/chosen@0");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+ if (chosen_off < 0) {
+ pr_err("Unable to find or add DT chosen node: %d\n",
+ chosen_off);
+ return chosen_off;
+ }
+
+ err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline());
+ if (err) {
+ pr_err("Unable to set bootargs property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static __init int append_memory(void *fdt)
{
unsigned long phys_memsize, memsize;
__be32 mem_array[2];
@@ -89,7 +125,7 @@ static int append_memory(void *fdt)
return 0;
}
-static int remove_gic(void *fdt)
+static __init int remove_gic(void *fdt)
{
const unsigned int cpu_ehci_int = 2;
const unsigned int cpu_uart_int = 4;
@@ -163,7 +199,7 @@ static int remove_gic(void *fdt)
return err;
}
- ehci_off = fdt_node_offset_by_compatible(fdt, -1, "mti,sead3-ehci");
+ ehci_off = fdt_node_offset_by_compatible(fdt, -1, "generic-ehci");
if (ehci_off < 0) {
pr_err("unable to find EHCI DT node: %d\n", ehci_off);
return ehci_off;
@@ -178,7 +214,7 @@ static int remove_gic(void *fdt)
return 0;
}
-static int serial_config(void *fdt)
+static __init int serial_config(void *fdt)
{
const char *yamontty, *mode_var;
char mode_var_name[9], path[18], parity;
@@ -257,21 +293,28 @@ static int serial_config(void *fdt)
return 0;
}
-void __init *sead3_dt_shim(void *fdt)
+static __init const void *sead3_fixup_fdt(const void *fdt,
+ const void *match_data)
{
+ static unsigned char fdt_buf[16 << 10] __initdata;
int err;
if (fdt_check_header(fdt))
panic("Corrupt DT");
- /* if this isn't SEAD3, leave the DT alone */
- if (fdt_node_check_compatible(fdt, 0, "mti,sead-3"))
- return fdt;
+ /* if this isn't SEAD3, something went wrong */
+ BUG_ON(fdt_node_check_compatible(fdt, 0, "mti,sead-3"));
+
+ fw_init_cmdline();
err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
if (err)
panic("Unable to open FDT: %d", err);
+ err = append_cmdline(fdt_buf);
+ if (err)
+ panic("Unable to patch FDT: %d", err);
+
err = append_memory(fdt_buf);
if (err)
panic("Unable to patch FDT: %d", err);
@@ -290,3 +333,44 @@ void __init *sead3_dt_shim(void *fdt)
return fdt_buf;
}
+
+static __init unsigned int sead3_measure_hpt_freq(void)
+{
+ void __iomem *status_reg = (void __iomem *)0xbf000410;
+ unsigned int freq, orig, tick = 0;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ orig = readl(status_reg) & 0x2; /* get original sample */
+ /* wait for transition */
+ while ((readl(status_reg) & 0x2) == orig)
+ ;
+ orig = orig ^ 0x2; /* flip the bit */
+
+ write_c0_count(0);
+
+ /* wait 1 second (the sampling clock transitions every 10ms) */
+ while (tick < 100) {
+ /* wait for transition */
+ while ((readl(status_reg) & 0x2) == orig)
+ ;
+ orig = orig ^ 0x2; /* flip the bit */
+ tick++;
+ }
+
+ freq = read_c0_count();
+
+ local_irq_restore(flags);
+
+ return freq;
+}
+
+extern char __dtb_sead3_begin[];
+
+MIPS_MACHINE(sead3) = {
+ .fdt = __dtb_sead3_begin,
+ .detect = sead3_detect,
+ .fixup_fdt = sead3_fixup_fdt,
+ .measure_hpt_freq = sead3_measure_hpt_freq,
+};
diff --git a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
deleted file mode 100644
index bfbd703..0000000
--- a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2004 Chris Dearman
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
-
-
-/*
- * CPU feature overrides for MIPS boards
- */
-#ifdef CONFIG_CPU_MIPS32
-#define cpu_has_tlb 1
-#define cpu_has_4kex 1
-#define cpu_has_4k_cache 1
-/* #define cpu_has_fpu ? */
-/* #define cpu_has_32fpr ? */
-#define cpu_has_counter 1
-/* #define cpu_has_watch ? */
-#define cpu_has_divec 1
-#define cpu_has_vce 0
-/* #define cpu_has_cache_cdex_p ? */
-/* #define cpu_has_cache_cdex_s ? */
-/* #define cpu_has_prefetch ? */
-#define cpu_has_mcheck 1
-/* #define cpu_has_ejtag ? */
-#ifdef CONFIG_CPU_MICROMIPS
-#define cpu_has_llsc 0
-#else
-#define cpu_has_llsc 1
-#endif
-/* #define cpu_has_vtag_icache ? */
-/* #define cpu_has_dc_aliases ? */
-/* #define cpu_has_ic_fills_f_dc ? */
-#define cpu_has_nofpuex 0
-/* #define cpu_has_64bits ? */
-/* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_inclusive_pcaches ? */
-#define cpu_icache_snoops_remote_store 1
-#endif
-
-#ifdef CONFIG_CPU_MIPS64
-#define cpu_has_tlb 1
-#define cpu_has_4kex 1
-#define cpu_has_4k_cache 1
-/* #define cpu_has_fpu ? */
-/* #define cpu_has_32fpr ? */
-#define cpu_has_counter 1
-/* #define cpu_has_watch ? */
-#define cpu_has_divec 1
-#define cpu_has_vce 0
-/* #define cpu_has_cache_cdex_p ? */
-/* #define cpu_has_cache_cdex_s ? */
-/* #define cpu_has_prefetch ? */
-#define cpu_has_mcheck 1
-/* #define cpu_has_ejtag ? */
-#define cpu_has_llsc 1
-/* #define cpu_has_vtag_icache ? */
-/* #define cpu_has_dc_aliases ? */
-/* #define cpu_has_ic_fills_f_dc ? */
-#define cpu_has_nofpuex 0
-/* #define cpu_has_64bits ? */
-/* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_inclusive_pcaches ? */
-#define cpu_icache_snoops_remote_store 1
-#endif
-
-#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-sead3/irq.h b/arch/mips/include/asm/mach-sead3/irq.h
deleted file mode 100644
index 5d154cf..0000000
--- a/arch/mips/include/asm/mach-sead3/irq.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_MACH_MIPS_IRQ_H
-#define __ASM_MACH_MIPS_IRQ_H
-
-#define NR_IRQS 256
-
-
-#include_next <irq.h>
-
-#endif /* __ASM_MACH_MIPS_IRQ_H */
diff --git a/arch/mips/include/asm/mach-sead3/kernel-entry-init.h b/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
deleted file mode 100644
index 6cccd4d..0000000
--- a/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Chris Dearman (chris@mips.com)
- * Copyright (C) 2007 Mips Technologies, Inc.
- */
-#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
-#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
-
- .macro kernel_entry_setup
- .endm
-
-/*
- * Do SMP slave processor setup necessary before we can safely execute C code.
- */
- .macro smp_slave_setup
- .endm
-
-#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-sead3/sead3-dtshim.h b/arch/mips/include/asm/mach-sead3/sead3-dtshim.h
deleted file mode 100644
index f5d7d9c..0000000
--- a/arch/mips/include/asm/mach-sead3/sead3-dtshim.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2016 Imagination Technologies
- * Author: Paul Burton <paul.burton@imgtec.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __MIPS_SEAD3_DTSHIM_H__
-#define __MIPS_SEAD3_DTSHIM_H__
-
-#include <linux/init.h>
-
-#ifdef CONFIG_MIPS_SEAD3
-
-extern void __init *sead3_dt_shim(void *fdt);
-
-#else /* !CONFIG_MIPS_SEAD3 */
-
-static inline void *sead3_dt_shim(void *fdt)
-{
- return fdt;
-}
-
-#endif /* !CONFIG_MIPS_SEAD3 */
-
-#endif /* __MIPS_SEAD3_DTSHIM_H__ */
diff --git a/arch/mips/include/asm/mach-sead3/war.h b/arch/mips/include/asm/mach-sead3/war.h
deleted file mode 100644
index d068fc4..0000000
--- a/arch/mips/include/asm/mach-sead3/war.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
-#define __ASM_MIPS_MACH_MIPS_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 1
-#define MIPS_CACHE_SYNC_WAR 1
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 1
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
deleted file mode 100644
index 1674b9c..0000000
--- a/arch/mips/mti-sead3/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
-#
-# Copyright (C) 2008 Wind River Systems, Inc.
-# written by Ralf Baechle <ralf@linux-mips.org>
-#
-# Copyright (C) 2012 MIPS Technoligies, Inc. All rights reserved.
-# Steven J. Hill <sjhill@mips.com>
-#
-obj-y := sead3-dtshim.o
-obj-y += sead3-init.o
-obj-y += sead3-int.o
-obj-y += sead3-setup.o
-obj-y += sead3-time.o
diff --git a/arch/mips/mti-sead3/Platform b/arch/mips/mti-sead3/Platform
deleted file mode 100644
index 3870924..0000000
--- a/arch/mips/mti-sead3/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# MIPS SEAD-3 board
-#
-platform-$(CONFIG_MIPS_SEAD3) += mti-sead3/
-cflags-$(CONFIG_MIPS_SEAD3) += -I$(srctree)/arch/mips/include/asm/mach-sead3
-load-$(CONFIG_MIPS_SEAD3) += 0xffffffff80100000
-all-$(CONFIG_MIPS_SEAD3) := $(COMPRESSION_FNAME).srec
diff --git a/arch/mips/mti-sead3/sead3-init.c b/arch/mips/mti-sead3/sead3-init.c
deleted file mode 100644
index 50f3fcb..0000000
--- a/arch/mips/mti-sead3/sead3-init.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/fw/fw.h>
-
-extern char except_vec_nmi;
-extern char except_vec_ejtag_debug;
-
-static void __init mips_nmi_setup(void)
-{
- void *base;
-
- base = cpu_has_veic ?
- (void *)(CAC_BASE + 0xa80) :
- (void *)(CAC_BASE + 0x380);
-#ifdef CONFIG_CPU_MICROMIPS
- /*
- * Decrement the exception vector address by one for microMIPS.
- */
- memcpy(base, (&except_vec_nmi - 1), 0x80);
-
- /*
- * This is a hack. We do not know if the boot loader was built with
- * microMIPS instructions or not. If it was not, the NMI exception
- * code at 0x80000a80 will be taken in MIPS32 mode. The hand coded
- * assembly below forces us into microMIPS mode if we are a pure
- * microMIPS kernel. The assembly instructions are:
- *
- * 3C1A8000 lui k0,0x8000
- * 375A0381 ori k0,k0,0x381
- * 03400008 jr k0
- * 00000000 nop
- *
- * The mode switch occurs by jumping to the unaligned exception
- * vector address at 0x80000381 which would have been 0x80000380
- * in MIPS32 mode. The jump to the unaligned address transitions
- * us into microMIPS mode.
- */
- if (!cpu_has_veic) {
- void *base2 = (void *)(CAC_BASE + 0xa80);
- *((unsigned int *)base2) = 0x3c1a8000;
- *((unsigned int *)base2 + 1) = 0x375a0381;
- *((unsigned int *)base2 + 2) = 0x03400008;
- *((unsigned int *)base2 + 3) = 0x00000000;
- flush_icache_range((unsigned long)base2,
- (unsigned long)base2 + 0x10);
- }
-#else
- memcpy(base, &except_vec_nmi, 0x80);
-#endif
- flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
-}
-
-static void __init mips_ejtag_setup(void)
-{
- void *base;
-
- base = cpu_has_veic ?
- (void *)(CAC_BASE + 0xa00) :
- (void *)(CAC_BASE + 0x300);
-#ifdef CONFIG_CPU_MICROMIPS
- /* Deja vu... */
- memcpy(base, (&except_vec_ejtag_debug - 1), 0x80);
- if (!cpu_has_veic) {
- void *base2 = (void *)(CAC_BASE + 0xa00);
- *((unsigned int *)base2) = 0x3c1a8000;
- *((unsigned int *)base2 + 1) = 0x375a0301;
- *((unsigned int *)base2 + 2) = 0x03400008;
- *((unsigned int *)base2 + 3) = 0x00000000;
- flush_icache_range((unsigned long)base2,
- (unsigned long)base2 + 0x10);
- }
-#else
- memcpy(base, &except_vec_ejtag_debug, 0x80);
-#endif
- flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
-}
-
-void __init prom_init(void)
-{
- board_nmi_handler_setup = mips_nmi_setup;
- board_ejtag_handler_setup = mips_ejtag_setup;
-
- fw_init_cmdline();
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c
deleted file mode 100644
index 2e6b732..0000000
--- a/arch/mips/mti-sead3/sead3-int.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/mips-gic.h>
-
-#include <asm/cpu-info.h>
-#include <asm/irq.h>
-
-void __init arch_init_irq(void)
-{
- irqchip_init();
-
- pr_info("GIC: %spresent\n", (gic_present) ? "" : "not ");
- pr_info("EIC: %s\n",
- (current_cpu_data.options & MIPS_CPU_VEIC) ? "on" : "off");
-}
-
diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c
deleted file mode 100644
index c915e54..0000000
--- a/arch/mips/mti-sead3/sead3-setup.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/init.h>
-#include <linux/libfdt.h>
-#include <linux/of_fdt.h>
-
-#include <asm/prom.h>
-
-#include <asm/mach-sead3/sead3-dtshim.h>
-#include <asm/mips-boards/generic.h>
-
-const char *get_system_type(void)
-{
- return "MIPS SEAD3";
-}
-
-void __init *plat_get_fdt(void)
-{
- return (void *)__dtb_start;
-}
-
-void __init plat_mem_setup(void)
-{
- void *fdt = plat_get_fdt();
-
- fdt = sead3_dt_shim(fdt);
- __dt_setup_arch(fdt);
-}
-
-void __init device_tree_init(void)
-{
- unflatten_and_copy_device_tree();
-}
diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c
deleted file mode 100644
index 71feb51..0000000
--- a/arch/mips/mti-sead3/sead3-time.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/irqchip/mips-gic.h>
-
-#include <asm/cpu.h>
-#include <asm/setup.h>
-#include <asm/time.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-
-static void __iomem *status_reg = (void __iomem *)0xbf000410;
-
-/*
- * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect.
- */
-static unsigned int __init estimate_cpu_frequency(void)
-{
- unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
- unsigned int tick = 0;
- unsigned int freq;
- unsigned int orig;
- unsigned long flags;
-
- local_irq_save(flags);
-
- orig = readl(status_reg) & 0x2; /* get original sample */
- /* wait for transition */
- while ((readl(status_reg) & 0x2) == orig)
- ;
- orig = orig ^ 0x2; /* flip the bit */
-
- write_c0_count(0);
-
- /* wait 1 second (the sampling clock transitions every 10ms) */
- while (tick < 100) {
- /* wait for transition */
- while ((readl(status_reg) & 0x2) == orig)
- ;
- orig = orig ^ 0x2; /* flip the bit */
- tick++;
- }
-
- freq = read_c0_count();
-
- local_irq_restore(flags);
-
- mips_hpt_frequency = freq;
-
- /* Adjust for processor */
- if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
- (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
- freq *= 2;
-
- freq += 5000; /* rounding */
- freq -= freq%10000;
-
- return freq ;
-}
-
-int get_c0_perfcount_int(void)
-{
- if (gic_present)
- return gic_get_c0_perfcount_int();
- if (cp0_perfcount_irq >= 0)
- return MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
- return -1;
-}
-EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
-
-unsigned int get_c0_compare_int(void)
-{
- if (gic_present)
- return gic_get_c0_compare_int();
- return MIPS_CPU_IRQ_BASE + cp0_compare_irq;
-}
-
-void __init plat_time_init(void)
-{
- unsigned int est_freq;
-
- est_freq = estimate_cpu_frequency();
-
- pr_debug("CPU frequency %d.%02d MHz\n", (est_freq / 1000000),
- (est_freq % 1000000) * 100 / 1000000);
-}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 23/26] MIPS: generic: Convert SEAD-3 to a generic board
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Matt Redfearn, Kefeng Wang, Jacek Anaszewski,
linux-kernel, devicetree, Rob Herring, Mark Rutland
Convert the MIPS SEAD-3 board support to be a generic board, supported
by generic kernels.
Because the SEAD-3 boot protocol was defined long ago and we don't want
to force a switch to the UHI protocol, SEAD-3 is added as a legacy board
which is detected by reading the REVISION register. This may technically
not be a valid memory read & future work will include attempting to
handle that gracefully. In practice since SEAD-3 is the only legacy
board supported by the generic kernel so far the read will only happen
on SEAD-3 boards, and even once Malta is converted the same REVISION
register exists there too. Other boards such as Boston, Ci20 & Ci40 will
use the UHI boot protocol & thus not run any of the legacy board detect
functions.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/Kbuild.platforms | 1 -
arch/mips/Kconfig | 37 +-----
arch/mips/Makefile | 13 +++
arch/mips/boot/dts/mti/Makefile | 2 +-
arch/mips/boot/dts/mti/sead3.dts | 1 +
arch/mips/configs/generic/board-sead-3.config | 32 +++++
arch/mips/configs/sead3_defconfig | 129 ---------------------
arch/mips/configs/sead3micro_defconfig | 122 -------------------
arch/mips/generic/Kconfig | 7 ++
arch/mips/generic/Makefile | 2 +
.../sead3-dtshim.c => generic/board-sead3.c} | 106 +++++++++++++++--
.../include/asm/mach-sead3/cpu-feature-overrides.h | 72 ------------
arch/mips/include/asm/mach-sead3/irq.h | 9 --
.../include/asm/mach-sead3/kernel-entry-init.h | 21 ----
arch/mips/include/asm/mach-sead3/sead3-dtshim.h | 29 -----
arch/mips/include/asm/mach-sead3/war.h | 24 ----
arch/mips/mti-sead3/Makefile | 15 ---
arch/mips/mti-sead3/Platform | 7 --
arch/mips/mti-sead3/sead3-init.c | 100 ----------------
arch/mips/mti-sead3/sead3-int.c | 23 ----
arch/mips/mti-sead3/sead3-setup.c | 39 -------
arch/mips/mti-sead3/sead3-time.c | 91 ---------------
22 files changed, 152 insertions(+), 730 deletions(-)
create mode 100644 arch/mips/configs/generic/board-sead-3.config
delete mode 100644 arch/mips/configs/sead3_defconfig
delete mode 100644 arch/mips/configs/sead3micro_defconfig
rename arch/mips/{mti-sead3/sead3-dtshim.c => generic/board-sead3.c} (72%)
delete mode 100644 arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
delete mode 100644 arch/mips/include/asm/mach-sead3/irq.h
delete mode 100644 arch/mips/include/asm/mach-sead3/kernel-entry-init.h
delete mode 100644 arch/mips/include/asm/mach-sead3/sead3-dtshim.h
delete mode 100644 arch/mips/include/asm/mach-sead3/war.h
delete mode 100644 arch/mips/mti-sead3/Makefile
delete mode 100644 arch/mips/mti-sead3/Platform
delete mode 100644 arch/mips/mti-sead3/sead3-init.c
delete mode 100644 arch/mips/mti-sead3/sead3-int.c
delete mode 100644 arch/mips/mti-sead3/sead3-setup.c
delete mode 100644 arch/mips/mti-sead3/sead3-time.c
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 9c1e8f9..f5f1bdb 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -19,7 +19,6 @@ platforms += lasat
platforms += loongson32
platforms += loongson64
platforms += mti-malta
-platforms += mti-sead3
platforms += netlogic
platforms += paravirt
platforms += pic32
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 92a3e37..7cf522f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -544,41 +544,6 @@ config MACH_PIC32
Microchip PIC32 is a family of general-purpose 32 bit MIPS core
microcontrollers.
-config MIPS_SEAD3
- bool "MIPS SEAD3 board"
- select BOOT_ELF32
- select BOOT_RAW
- select BUILTIN_DTB
- select CEVT_R4K
- select CSRC_R4K
- select CLKSRC_MIPS_GIC
- select COMMON_CLK
- select CPU_MIPSR2_IRQ_VI
- select CPU_MIPSR2_IRQ_EI
- select DMA_NONCOHERENT
- select IRQ_MIPS_CPU
- select MIPS_GIC
- select LIBFDT
- select MIPS_MSC
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_HAS_CPU_MIPS32_R6
- select SYS_HAS_CPU_MIPS64_R1
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_SMARTMIPS
- select SYS_SUPPORTS_MICROMIPS
- select SYS_SUPPORTS_MIPS16
- select SYS_SUPPORTS_RELOCATABLE
- select USB_EHCI_BIG_ENDIAN_DESC
- select USB_EHCI_BIG_ENDIAN_MMIO
- select USE_OF
- help
- This enables support for the MIPS Technologies SEAD3 evaluation
- board.
-
config NEC_MARKEINS
bool "NEC EMMA2RH Mark-eins board"
select SOC_EMMA2RH
@@ -2961,7 +2926,7 @@ endchoice
choice
prompt "Kernel command line type" if !CMDLINE_OVERRIDE
default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
- !MIPS_MALTA && !MIPS_SEAD3 && \
+ !MIPS_MALTA && \
!CAVIUM_OCTEON_SOC
default MIPS_CMDLINE_FROM_BOOTLOADER
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index a3e8e4c..a6334a5 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -492,3 +492,16 @@ $(generic_defconfigs):
# Prevent generic merge_config rules attempting to merge single fragments
#
$(generic_config_dir)/%.config: ;
+
+#
+# Legacy defconfig compatibility - these targets used to be real defconfigs but
+# now that the boards have been converted to use the generic kernel they are
+# wrappers around the generic rules above.
+#
+.PHONY: sead3_defconfig
+sead3_defconfig:
+ $(Q)$(MAKE) 32r2el_defconfig BOARDS=sead-3
+
+.PHONY: sead3micro_defconfig
+sead3micro_defconfig:
+ $(Q)$(MAKE) micro32r2el_defconfig BOARDS=sead-3
diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
index 144d776..fcabd69 100644
--- a/arch/mips/boot/dts/mti/Makefile
+++ b/arch/mips/boot/dts/mti/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_MIPS_MALTA) += malta.dtb
-dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb
+dtb-$(CONFIG_LEGACY_BOARD_SEAD3) += sead3.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
index 2579ca5..b112879 100644
--- a/arch/mips/boot/dts/mti/sead3.dts
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -10,6 +10,7 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "mti,sead-3";
+ model = "MIPS SEAD-3";
interrupt-parent = <&gic>;
chosen {
diff --git a/arch/mips/configs/generic/board-sead-3.config b/arch/mips/configs/generic/board-sead-3.config
new file mode 100644
index 0000000..3b5e1ac
--- /dev/null
+++ b/arch/mips/configs/generic/board-sead-3.config
@@ -0,0 +1,32 @@
+CONFIG_LEGACY_BOARD_SEAD3=y
+
+CONFIG_AUXDISPLAY=y
+CONFIG_IMG_ASCII_LCD=y
+
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
+
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+CONFIG_SMSC_PHY=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/arch/mips/configs/sead3_defconfig b/arch/mips/configs/sead3_defconfig
deleted file mode 100644
index ab4c465..0000000
--- a/arch/mips/configs/sead3_defconfig
+++ /dev/null
@@ -1,129 +0,0 @@
-CONFIG_MIPS_SEAD3=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_HZ_100=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon"
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_OF=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_SPI=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_RESTART=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_SENSORS_ADT7475=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T80=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/configs/sead3micro_defconfig b/arch/mips/configs/sead3micro_defconfig
deleted file mode 100644
index cd91a77..0000000
--- a/arch/mips/configs/sead3micro_defconfig
+++ /dev/null
@@ -1,122 +0,0 @@
-CONFIG_MIPS_SEAD3=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MICROMIPS=y
-CONFIG_HZ_100=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_SPI=y
-CONFIG_SENSORS_ADT7475=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T80=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index baddb06..a606b3f 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -9,4 +9,11 @@ config LEGACY_BOARDS
kernel is booted without being provided with an FDT via the UHI
boot protocol.
+config LEGACY_BOARD_SEAD3
+ bool "Support MIPS SEAD-3 boards"
+ select LEGACY_BOARDS
+ help
+ Enable this to include support for booting on MIPS SEAD-3 FPGA-based
+ development boards, which boot using a legacy boot protocol.
+
endif
diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile
index 26e6420..7c66494 100644
--- a/arch/mips/generic/Makefile
+++ b/arch/mips/generic/Makefile
@@ -11,3 +11,5 @@
obj-y += init.o
obj-y += irq.o
obj-y += proc.o
+
+obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o
diff --git a/arch/mips/mti-sead3/sead3-dtshim.c b/arch/mips/generic/board-sead3.c
similarity index 72%
rename from arch/mips/mti-sead3/sead3-dtshim.c
rename to arch/mips/generic/board-sead3.c
index d6b0708..f4ae058 100644
--- a/arch/mips/mti-sead3/sead3-dtshim.c
+++ b/arch/mips/generic/board-sead3.c
@@ -4,11 +4,11 @@
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
+ * Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
-#define pr_fmt(fmt) "sead3-dtshim: " fmt
+#define pr_fmt(fmt) "sead3: " fmt
#include <linux/errno.h>
#include <linux/libfdt.h>
@@ -16,13 +16,49 @@
#include <asm/fw/fw.h>
#include <asm/io.h>
+#include <asm/machine.h>
#define SEAD_CONFIG CKSEG1ADDR(0x1b100110)
#define SEAD_CONFIG_GIC_PRESENT BIT(1)
-static unsigned char fdt_buf[16 << 10] __initdata;
+#define MIPS_REVISION CKSEG1ADDR(0x1fc00010)
+#define MIPS_REVISION_MACHINE (0xf << 4)
+#define MIPS_REVISION_MACHINE_SEAD3 (0x4 << 4)
-static int append_memory(void *fdt)
+static __init bool sead3_detect(void)
+{
+ uint32_t rev;
+
+ rev = __raw_readl((void *)MIPS_REVISION);
+ return (rev & MIPS_REVISION_MACHINE) == MIPS_REVISION_MACHINE_SEAD3;
+}
+
+static __init int append_cmdline(void *fdt)
+{
+ int err, chosen_off;
+
+ /* find or add chosen node */
+ chosen_off = fdt_path_offset(fdt, "/chosen");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_path_offset(fdt, "/chosen@0");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+ if (chosen_off < 0) {
+ pr_err("Unable to find or add DT chosen node: %d\n",
+ chosen_off);
+ return chosen_off;
+ }
+
+ err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline());
+ if (err) {
+ pr_err("Unable to set bootargs property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static __init int append_memory(void *fdt)
{
unsigned long phys_memsize, memsize;
__be32 mem_array[2];
@@ -89,7 +125,7 @@ static int append_memory(void *fdt)
return 0;
}
-static int remove_gic(void *fdt)
+static __init int remove_gic(void *fdt)
{
const unsigned int cpu_ehci_int = 2;
const unsigned int cpu_uart_int = 4;
@@ -163,7 +199,7 @@ static int remove_gic(void *fdt)
return err;
}
- ehci_off = fdt_node_offset_by_compatible(fdt, -1, "mti,sead3-ehci");
+ ehci_off = fdt_node_offset_by_compatible(fdt, -1, "generic-ehci");
if (ehci_off < 0) {
pr_err("unable to find EHCI DT node: %d\n", ehci_off);
return ehci_off;
@@ -178,7 +214,7 @@ static int remove_gic(void *fdt)
return 0;
}
-static int serial_config(void *fdt)
+static __init int serial_config(void *fdt)
{
const char *yamontty, *mode_var;
char mode_var_name[9], path[18], parity;
@@ -257,21 +293,28 @@ static int serial_config(void *fdt)
return 0;
}
-void __init *sead3_dt_shim(void *fdt)
+static __init const void *sead3_fixup_fdt(const void *fdt,
+ const void *match_data)
{
+ static unsigned char fdt_buf[16 << 10] __initdata;
int err;
if (fdt_check_header(fdt))
panic("Corrupt DT");
- /* if this isn't SEAD3, leave the DT alone */
- if (fdt_node_check_compatible(fdt, 0, "mti,sead-3"))
- return fdt;
+ /* if this isn't SEAD3, something went wrong */
+ BUG_ON(fdt_node_check_compatible(fdt, 0, "mti,sead-3"));
+
+ fw_init_cmdline();
err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
if (err)
panic("Unable to open FDT: %d", err);
+ err = append_cmdline(fdt_buf);
+ if (err)
+ panic("Unable to patch FDT: %d", err);
+
err = append_memory(fdt_buf);
if (err)
panic("Unable to patch FDT: %d", err);
@@ -290,3 +333,44 @@ void __init *sead3_dt_shim(void *fdt)
return fdt_buf;
}
+
+static __init unsigned int sead3_measure_hpt_freq(void)
+{
+ void __iomem *status_reg = (void __iomem *)0xbf000410;
+ unsigned int freq, orig, tick = 0;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ orig = readl(status_reg) & 0x2; /* get original sample */
+ /* wait for transition */
+ while ((readl(status_reg) & 0x2) == orig)
+ ;
+ orig = orig ^ 0x2; /* flip the bit */
+
+ write_c0_count(0);
+
+ /* wait 1 second (the sampling clock transitions every 10ms) */
+ while (tick < 100) {
+ /* wait for transition */
+ while ((readl(status_reg) & 0x2) == orig)
+ ;
+ orig = orig ^ 0x2; /* flip the bit */
+ tick++;
+ }
+
+ freq = read_c0_count();
+
+ local_irq_restore(flags);
+
+ return freq;
+}
+
+extern char __dtb_sead3_begin[];
+
+MIPS_MACHINE(sead3) = {
+ .fdt = __dtb_sead3_begin,
+ .detect = sead3_detect,
+ .fixup_fdt = sead3_fixup_fdt,
+ .measure_hpt_freq = sead3_measure_hpt_freq,
+};
diff --git a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
deleted file mode 100644
index bfbd703..0000000
--- a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2004 Chris Dearman
- * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
-
-
-/*
- * CPU feature overrides for MIPS boards
- */
-#ifdef CONFIG_CPU_MIPS32
-#define cpu_has_tlb 1
-#define cpu_has_4kex 1
-#define cpu_has_4k_cache 1
-/* #define cpu_has_fpu ? */
-/* #define cpu_has_32fpr ? */
-#define cpu_has_counter 1
-/* #define cpu_has_watch ? */
-#define cpu_has_divec 1
-#define cpu_has_vce 0
-/* #define cpu_has_cache_cdex_p ? */
-/* #define cpu_has_cache_cdex_s ? */
-/* #define cpu_has_prefetch ? */
-#define cpu_has_mcheck 1
-/* #define cpu_has_ejtag ? */
-#ifdef CONFIG_CPU_MICROMIPS
-#define cpu_has_llsc 0
-#else
-#define cpu_has_llsc 1
-#endif
-/* #define cpu_has_vtag_icache ? */
-/* #define cpu_has_dc_aliases ? */
-/* #define cpu_has_ic_fills_f_dc ? */
-#define cpu_has_nofpuex 0
-/* #define cpu_has_64bits ? */
-/* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_inclusive_pcaches ? */
-#define cpu_icache_snoops_remote_store 1
-#endif
-
-#ifdef CONFIG_CPU_MIPS64
-#define cpu_has_tlb 1
-#define cpu_has_4kex 1
-#define cpu_has_4k_cache 1
-/* #define cpu_has_fpu ? */
-/* #define cpu_has_32fpr ? */
-#define cpu_has_counter 1
-/* #define cpu_has_watch ? */
-#define cpu_has_divec 1
-#define cpu_has_vce 0
-/* #define cpu_has_cache_cdex_p ? */
-/* #define cpu_has_cache_cdex_s ? */
-/* #define cpu_has_prefetch ? */
-#define cpu_has_mcheck 1
-/* #define cpu_has_ejtag ? */
-#define cpu_has_llsc 1
-/* #define cpu_has_vtag_icache ? */
-/* #define cpu_has_dc_aliases ? */
-/* #define cpu_has_ic_fills_f_dc ? */
-#define cpu_has_nofpuex 0
-/* #define cpu_has_64bits ? */
-/* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_inclusive_pcaches ? */
-#define cpu_icache_snoops_remote_store 1
-#endif
-
-#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-sead3/irq.h b/arch/mips/include/asm/mach-sead3/irq.h
deleted file mode 100644
index 5d154cf..0000000
--- a/arch/mips/include/asm/mach-sead3/irq.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_MACH_MIPS_IRQ_H
-#define __ASM_MACH_MIPS_IRQ_H
-
-#define NR_IRQS 256
-
-
-#include_next <irq.h>
-
-#endif /* __ASM_MACH_MIPS_IRQ_H */
diff --git a/arch/mips/include/asm/mach-sead3/kernel-entry-init.h b/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
deleted file mode 100644
index 6cccd4d..0000000
--- a/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Chris Dearman (chris@mips.com)
- * Copyright (C) 2007 Mips Technologies, Inc.
- */
-#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
-#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
-
- .macro kernel_entry_setup
- .endm
-
-/*
- * Do SMP slave processor setup necessary before we can safely execute C code.
- */
- .macro smp_slave_setup
- .endm
-
-#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-sead3/sead3-dtshim.h b/arch/mips/include/asm/mach-sead3/sead3-dtshim.h
deleted file mode 100644
index f5d7d9c..0000000
--- a/arch/mips/include/asm/mach-sead3/sead3-dtshim.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2016 Imagination Technologies
- * Author: Paul Burton <paul.burton@imgtec.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __MIPS_SEAD3_DTSHIM_H__
-#define __MIPS_SEAD3_DTSHIM_H__
-
-#include <linux/init.h>
-
-#ifdef CONFIG_MIPS_SEAD3
-
-extern void __init *sead3_dt_shim(void *fdt);
-
-#else /* !CONFIG_MIPS_SEAD3 */
-
-static inline void *sead3_dt_shim(void *fdt)
-{
- return fdt;
-}
-
-#endif /* !CONFIG_MIPS_SEAD3 */
-
-#endif /* __MIPS_SEAD3_DTSHIM_H__ */
diff --git a/arch/mips/include/asm/mach-sead3/war.h b/arch/mips/include/asm/mach-sead3/war.h
deleted file mode 100644
index d068fc4..0000000
--- a/arch/mips/include/asm/mach-sead3/war.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
-#define __ASM_MIPS_MACH_MIPS_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 1
-#define MIPS_CACHE_SYNC_WAR 1
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 1
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
deleted file mode 100644
index 1674b9c..0000000
--- a/arch/mips/mti-sead3/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
-#
-# Copyright (C) 2008 Wind River Systems, Inc.
-# written by Ralf Baechle <ralf@linux-mips.org>
-#
-# Copyright (C) 2012 MIPS Technoligies, Inc. All rights reserved.
-# Steven J. Hill <sjhill@mips.com>
-#
-obj-y := sead3-dtshim.o
-obj-y += sead3-init.o
-obj-y += sead3-int.o
-obj-y += sead3-setup.o
-obj-y += sead3-time.o
diff --git a/arch/mips/mti-sead3/Platform b/arch/mips/mti-sead3/Platform
deleted file mode 100644
index 3870924..0000000
--- a/arch/mips/mti-sead3/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# MIPS SEAD-3 board
-#
-platform-$(CONFIG_MIPS_SEAD3) += mti-sead3/
-cflags-$(CONFIG_MIPS_SEAD3) += -I$(srctree)/arch/mips/include/asm/mach-sead3
-load-$(CONFIG_MIPS_SEAD3) += 0xffffffff80100000
-all-$(CONFIG_MIPS_SEAD3) := $(COMPRESSION_FNAME).srec
diff --git a/arch/mips/mti-sead3/sead3-init.c b/arch/mips/mti-sead3/sead3-init.c
deleted file mode 100644
index 50f3fcb..0000000
--- a/arch/mips/mti-sead3/sead3-init.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/fw/fw.h>
-
-extern char except_vec_nmi;
-extern char except_vec_ejtag_debug;
-
-static void __init mips_nmi_setup(void)
-{
- void *base;
-
- base = cpu_has_veic ?
- (void *)(CAC_BASE + 0xa80) :
- (void *)(CAC_BASE + 0x380);
-#ifdef CONFIG_CPU_MICROMIPS
- /*
- * Decrement the exception vector address by one for microMIPS.
- */
- memcpy(base, (&except_vec_nmi - 1), 0x80);
-
- /*
- * This is a hack. We do not know if the boot loader was built with
- * microMIPS instructions or not. If it was not, the NMI exception
- * code at 0x80000a80 will be taken in MIPS32 mode. The hand coded
- * assembly below forces us into microMIPS mode if we are a pure
- * microMIPS kernel. The assembly instructions are:
- *
- * 3C1A8000 lui k0,0x8000
- * 375A0381 ori k0,k0,0x381
- * 03400008 jr k0
- * 00000000 nop
- *
- * The mode switch occurs by jumping to the unaligned exception
- * vector address at 0x80000381 which would have been 0x80000380
- * in MIPS32 mode. The jump to the unaligned address transitions
- * us into microMIPS mode.
- */
- if (!cpu_has_veic) {
- void *base2 = (void *)(CAC_BASE + 0xa80);
- *((unsigned int *)base2) = 0x3c1a8000;
- *((unsigned int *)base2 + 1) = 0x375a0381;
- *((unsigned int *)base2 + 2) = 0x03400008;
- *((unsigned int *)base2 + 3) = 0x00000000;
- flush_icache_range((unsigned long)base2,
- (unsigned long)base2 + 0x10);
- }
-#else
- memcpy(base, &except_vec_nmi, 0x80);
-#endif
- flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
-}
-
-static void __init mips_ejtag_setup(void)
-{
- void *base;
-
- base = cpu_has_veic ?
- (void *)(CAC_BASE + 0xa00) :
- (void *)(CAC_BASE + 0x300);
-#ifdef CONFIG_CPU_MICROMIPS
- /* Deja vu... */
- memcpy(base, (&except_vec_ejtag_debug - 1), 0x80);
- if (!cpu_has_veic) {
- void *base2 = (void *)(CAC_BASE + 0xa00);
- *((unsigned int *)base2) = 0x3c1a8000;
- *((unsigned int *)base2 + 1) = 0x375a0301;
- *((unsigned int *)base2 + 2) = 0x03400008;
- *((unsigned int *)base2 + 3) = 0x00000000;
- flush_icache_range((unsigned long)base2,
- (unsigned long)base2 + 0x10);
- }
-#else
- memcpy(base, &except_vec_ejtag_debug, 0x80);
-#endif
- flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
-}
-
-void __init prom_init(void)
-{
- board_nmi_handler_setup = mips_nmi_setup;
- board_ejtag_handler_setup = mips_ejtag_setup;
-
- fw_init_cmdline();
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c
deleted file mode 100644
index 2e6b732..0000000
--- a/arch/mips/mti-sead3/sead3-int.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/mips-gic.h>
-
-#include <asm/cpu-info.h>
-#include <asm/irq.h>
-
-void __init arch_init_irq(void)
-{
- irqchip_init();
-
- pr_info("GIC: %spresent\n", (gic_present) ? "" : "not ");
- pr_info("EIC: %s\n",
- (current_cpu_data.options & MIPS_CPU_VEIC) ? "on" : "off");
-}
-
diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c
deleted file mode 100644
index c915e54..0000000
--- a/arch/mips/mti-sead3/sead3-setup.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/init.h>
-#include <linux/libfdt.h>
-#include <linux/of_fdt.h>
-
-#include <asm/prom.h>
-
-#include <asm/mach-sead3/sead3-dtshim.h>
-#include <asm/mips-boards/generic.h>
-
-const char *get_system_type(void)
-{
- return "MIPS SEAD3";
-}
-
-void __init *plat_get_fdt(void)
-{
- return (void *)__dtb_start;
-}
-
-void __init plat_mem_setup(void)
-{
- void *fdt = plat_get_fdt();
-
- fdt = sead3_dt_shim(fdt);
- __dt_setup_arch(fdt);
-}
-
-void __init device_tree_init(void)
-{
- unflatten_and_copy_device_tree();
-}
diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c
deleted file mode 100644
index 71feb51..0000000
--- a/arch/mips/mti-sead3/sead3-time.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/init.h>
-#include <linux/irqchip/mips-gic.h>
-
-#include <asm/cpu.h>
-#include <asm/setup.h>
-#include <asm/time.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-
-static void __iomem *status_reg = (void __iomem *)0xbf000410;
-
-/*
- * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect.
- */
-static unsigned int __init estimate_cpu_frequency(void)
-{
- unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
- unsigned int tick = 0;
- unsigned int freq;
- unsigned int orig;
- unsigned long flags;
-
- local_irq_save(flags);
-
- orig = readl(status_reg) & 0x2; /* get original sample */
- /* wait for transition */
- while ((readl(status_reg) & 0x2) == orig)
- ;
- orig = orig ^ 0x2; /* flip the bit */
-
- write_c0_count(0);
-
- /* wait 1 second (the sampling clock transitions every 10ms) */
- while (tick < 100) {
- /* wait for transition */
- while ((readl(status_reg) & 0x2) == orig)
- ;
- orig = orig ^ 0x2; /* flip the bit */
- tick++;
- }
-
- freq = read_c0_count();
-
- local_irq_restore(flags);
-
- mips_hpt_frequency = freq;
-
- /* Adjust for processor */
- if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
- (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
- freq *= 2;
-
- freq += 5000; /* rounding */
- freq -= freq%10000;
-
- return freq ;
-}
-
-int get_c0_perfcount_int(void)
-{
- if (gic_present)
- return gic_get_c0_perfcount_int();
- if (cp0_perfcount_irq >= 0)
- return MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
- return -1;
-}
-EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
-
-unsigned int get_c0_compare_int(void)
-{
- if (gic_present)
- return gic_get_c0_compare_int();
- return MIPS_CPU_IRQ_BASE + cp0_compare_irq;
-}
-
-void __init plat_time_init(void)
-{
- unsigned int est_freq;
-
- est_freq = estimate_cpu_frequency();
-
- pr_debug("CPU frequency %d.%02d MHz\n", (est_freq / 1000000),
- (est_freq % 1000000) * 100 / 1000000);
-}
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 24/26] dt-bindings: Document img,boston-clock binding
2016-08-30 17:29 ` Paul Burton
@ 2016-08-30 17:29 ` Paul Burton
-1 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, devicetree, Michael Turquette, Stephen Boyd,
linux-kernel, Rob Herring, Mark Rutland, linux-clk
Add device tree binding documentation for the clocks provided by the
MIPS Boston development board from Imagination Technologies, and a
header file describing the available clocks for use by device trees &
driver.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2:
- Add BOSTON_CLK_INPUT to expose the input clock.
.../devicetree/bindings/clock/img,boston-clock.txt | 27 ++++++++++++++++++++++
include/dt-bindings/clock/boston-clock.h | 14 +++++++++++
2 files changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/img,boston-clock.txt
create mode 100644 include/dt-bindings/clock/boston-clock.h
diff --git a/Documentation/devicetree/bindings/clock/img,boston-clock.txt b/Documentation/devicetree/bindings/clock/img,boston-clock.txt
new file mode 100644
index 0000000..c01ea60
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/img,boston-clock.txt
@@ -0,0 +1,27 @@
+Binding for Imagination Technologies MIPS Boston clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Should be "img,boston-clock".
+- #clock-cells : Should be set to 1.
+ Values available for clock consumers can be found in the header file:
+ <dt-bindings/clock/boston-clock.h>
+- regmap : Phandle to the Boston platform register system controller.
+ This should contain a phandle to the system controller node covering the
+ platform registers provided by the Boston board.
+
+Example:
+
+ clk_boston: clock {
+ compatible = "img,boston-clock";
+ #clock-cells = <1>;
+ regmap = <&plat_regs>;
+ };
+
+ uart0: uart@17ffe000 {
+ /* ... */
+ clocks = <&clk_boston BOSTON_CLK_SYS>;
+ };
diff --git a/include/dt-bindings/clock/boston-clock.h b/include/dt-bindings/clock/boston-clock.h
new file mode 100644
index 0000000..a6f0098
--- /dev/null
+++ b/include/dt-bindings/clock/boston-clock.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__
+#define __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__
+
+#define BOSTON_CLK_INPUT 0
+#define BOSTON_CLK_SYS 1
+#define BOSTON_CLK_CPU 2
+
+#endif /* __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__ */
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 24/26] dt-bindings: Document img,boston-clock binding
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, devicetree, Michael Turquette, Stephen Boyd,
linux-kernel, Rob Herring, Mark Rutland, linux-clk
Add device tree binding documentation for the clocks provided by the
MIPS Boston development board from Imagination Technologies, and a
header file describing the available clocks for use by device trees &
driver.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2:
- Add BOSTON_CLK_INPUT to expose the input clock.
.../devicetree/bindings/clock/img,boston-clock.txt | 27 ++++++++++++++++++++++
include/dt-bindings/clock/boston-clock.h | 14 +++++++++++
2 files changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/img,boston-clock.txt
create mode 100644 include/dt-bindings/clock/boston-clock.h
diff --git a/Documentation/devicetree/bindings/clock/img,boston-clock.txt b/Documentation/devicetree/bindings/clock/img,boston-clock.txt
new file mode 100644
index 0000000..c01ea60
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/img,boston-clock.txt
@@ -0,0 +1,27 @@
+Binding for Imagination Technologies MIPS Boston clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Should be "img,boston-clock".
+- #clock-cells : Should be set to 1.
+ Values available for clock consumers can be found in the header file:
+ <dt-bindings/clock/boston-clock.h>
+- regmap : Phandle to the Boston platform register system controller.
+ This should contain a phandle to the system controller node covering the
+ platform registers provided by the Boston board.
+
+Example:
+
+ clk_boston: clock {
+ compatible = "img,boston-clock";
+ #clock-cells = <1>;
+ regmap = <&plat_regs>;
+ };
+
+ uart0: uart@17ffe000 {
+ /* ... */
+ clocks = <&clk_boston BOSTON_CLK_SYS>;
+ };
diff --git a/include/dt-bindings/clock/boston-clock.h b/include/dt-bindings/clock/boston-clock.h
new file mode 100644
index 0000000..a6f0098
--- /dev/null
+++ b/include/dt-bindings/clock/boston-clock.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__
+#define __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__
+
+#define BOSTON_CLK_INPUT 0
+#define BOSTON_CLK_SYS 1
+#define BOSTON_CLK_CPU 2
+
+#endif /* __DT_BINDINGS_CLOCK_BOSTON_CLOCK_H__ */
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 25/26] clk: boston: Add a driver for MIPS Boston board clocks
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Stephen Boyd, Michael Turquette, linux-kernel, linux-clk
Add a driver for the clocks provided by the MIPS Boston board from
Imagination Technologies. 2 clocks are provided - the system clock & the
CPU clock - and each is a simple fixed rate clock whose frequency can be
determined by reading a register provided by the board.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2:
- Support BOSTON_CLK_INPUT.
- Register clocks with clk_register_fixed_rate during boot, removing need for clk_ops.
- s/uint32_t/u32/.
- Move driver to a vendor directory.
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/imgtec/Kconfig | 10 ++++
drivers/clk/imgtec/Makefile | 1 +
drivers/clk/imgtec/clk-boston.c | 101 ++++++++++++++++++++++++++++++++++++++++
5 files changed, 114 insertions(+)
create mode 100644 drivers/clk/imgtec/Kconfig
create mode 100644 drivers/clk/imgtec/Makefile
create mode 100644 drivers/clk/imgtec/clk-boston.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index e2d9bd7..a6c7e03 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -210,6 +210,7 @@ config COMMON_CLK_OXNAS
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
+source "drivers/clk/imgtec/Kconfig"
source "drivers/clk/meson/Kconfig"
source "drivers/clk/mvebu/Kconfig"
source "drivers/clk/qcom/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 3b6f9cf..8c4c425 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -60,6 +60,7 @@ obj-y += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-$(CONFIG_H8300) += h8300/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
+obj-y += imgtec/
obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_MACH_INGENIC) += ingenic/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
diff --git a/drivers/clk/imgtec/Kconfig b/drivers/clk/imgtec/Kconfig
new file mode 100644
index 0000000..c2ea745
--- /dev/null
+++ b/drivers/clk/imgtec/Kconfig
@@ -0,0 +1,10 @@
+config COMMON_CLK_BOSTON
+ bool "Clock driver for MIPS Boston boards"
+ depends on MIPS || COMPILE_TEST
+ depends on OF
+ select MFD_SYSCON
+ ---help---
+ Enable this to support the system & CPU clocks on the MIPS Boston
+ development board from Imagination Technologies. These are simple
+ fixed rate clocks whose rate is determined by reading a platform
+ provided register.
diff --git a/drivers/clk/imgtec/Makefile b/drivers/clk/imgtec/Makefile
new file mode 100644
index 0000000..ac779b8
--- /dev/null
+++ b/drivers/clk/imgtec/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_COMMON_CLK_BOSTON) += clk-boston.o
diff --git a/drivers/clk/imgtec/clk-boston.c b/drivers/clk/imgtec/clk-boston.c
new file mode 100644
index 0000000..14795b8
--- /dev/null
+++ b/drivers/clk/imgtec/clk-boston.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+
+#include <dt-bindings/clock/boston-clock.h>
+
+#define BOSTON_PLAT_MMCMDIV 0x30
+# define BOSTON_PLAT_MMCMDIV_CLK0DIV (0xff << 0)
+# define BOSTON_PLAT_MMCMDIV_INPUT (0xff << 8)
+# define BOSTON_PLAT_MMCMDIV_MUL (0xff << 16)
+# define BOSTON_PLAT_MMCMDIV_CLK1DIV (0xff << 24)
+
+#define BOSTON_CLK_COUNT 3
+
+struct clk_boston_state {
+ struct clk *clks[BOSTON_CLK_COUNT];
+ struct clk_onecell_data onecell_data;
+};
+
+static u32 ext_field(u32 val, u32 mask)
+{
+ return (val & mask) >> (ffs(mask) - 1);
+}
+
+static void __init clk_boston_setup(struct device_node *np)
+{
+ unsigned long in_freq, cpu_freq, sys_freq;
+ uint mmcmdiv, mul, cpu_div, sys_div;
+ struct clk_boston_state *state;
+ struct regmap *regmap;
+ struct clk *clk;
+ int err;
+
+ regmap = syscon_regmap_lookup_by_phandle(np, "regmap");
+ if (IS_ERR(regmap)) {
+ pr_err("failed to find regmap\n");
+ return;
+ }
+
+ err = regmap_read(regmap, BOSTON_PLAT_MMCMDIV, &mmcmdiv);
+ if (err) {
+ pr_err("failed to read mmcm_div register: %d\n", err);
+ return;
+ }
+
+ in_freq = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_INPUT) * 1000000;
+ mul = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_MUL);
+
+ sys_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK0DIV);
+ sys_freq = mult_frac(in_freq, mul, sys_div);
+
+ cpu_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK1DIV);
+ cpu_freq = mult_frac(in_freq, mul, cpu_div);
+
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return;
+
+ clk = clk_register_fixed_rate(NULL, "input", NULL, 0, in_freq);
+ if (IS_ERR(clk)) {
+ pr_err("failed to register input clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+ state->clks[BOSTON_CLK_INPUT] = clk;
+
+ clk = clk_register_fixed_rate(NULL, "sys", "input", 0, sys_freq);
+ if (IS_ERR(clk)) {
+ pr_err("failed to register sys clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+ state->clks[BOSTON_CLK_SYS] = clk;
+
+ clk = clk_register_fixed_rate(NULL, "cpu", "input", 0, cpu_freq);
+ if (IS_ERR(clk)) {
+ pr_err("failed to register cpu clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+ state->clks[BOSTON_CLK_CPU] = clk;
+
+ state->onecell_data.clks = state->clks;
+ state->onecell_data.clk_num = BOSTON_CLK_COUNT;
+
+ err = of_clk_add_provider(np, of_clk_src_onecell_get,
+ &state->onecell_data);
+ if (err)
+ pr_err("failed to add DT provider: %d\n", err);
+}
+CLK_OF_DECLARE(clk_boston, "img,boston-clock", clk_boston_setup);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 25/26] clk: boston: Add a driver for MIPS Boston board clocks
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, Stephen Boyd, Michael Turquette, linux-kernel, linux-clk
Add a driver for the clocks provided by the MIPS Boston board from
Imagination Technologies. 2 clocks are provided - the system clock & the
CPU clock - and each is a simple fixed rate clock whose frequency can be
determined by reading a register provided by the board.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2:
- Support BOSTON_CLK_INPUT.
- Register clocks with clk_register_fixed_rate during boot, removing need for clk_ops.
- s/uint32_t/u32/.
- Move driver to a vendor directory.
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/imgtec/Kconfig | 10 ++++
drivers/clk/imgtec/Makefile | 1 +
drivers/clk/imgtec/clk-boston.c | 101 ++++++++++++++++++++++++++++++++++++++++
5 files changed, 114 insertions(+)
create mode 100644 drivers/clk/imgtec/Kconfig
create mode 100644 drivers/clk/imgtec/Makefile
create mode 100644 drivers/clk/imgtec/clk-boston.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index e2d9bd7..a6c7e03 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -210,6 +210,7 @@ config COMMON_CLK_OXNAS
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
+source "drivers/clk/imgtec/Kconfig"
source "drivers/clk/meson/Kconfig"
source "drivers/clk/mvebu/Kconfig"
source "drivers/clk/qcom/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 3b6f9cf..8c4c425 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -60,6 +60,7 @@ obj-y += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-$(CONFIG_H8300) += h8300/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
+obj-y += imgtec/
obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_MACH_INGENIC) += ingenic/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
diff --git a/drivers/clk/imgtec/Kconfig b/drivers/clk/imgtec/Kconfig
new file mode 100644
index 0000000..c2ea745
--- /dev/null
+++ b/drivers/clk/imgtec/Kconfig
@@ -0,0 +1,10 @@
+config COMMON_CLK_BOSTON
+ bool "Clock driver for MIPS Boston boards"
+ depends on MIPS || COMPILE_TEST
+ depends on OF
+ select MFD_SYSCON
+ ---help---
+ Enable this to support the system & CPU clocks on the MIPS Boston
+ development board from Imagination Technologies. These are simple
+ fixed rate clocks whose rate is determined by reading a platform
+ provided register.
diff --git a/drivers/clk/imgtec/Makefile b/drivers/clk/imgtec/Makefile
new file mode 100644
index 0000000..ac779b8
--- /dev/null
+++ b/drivers/clk/imgtec/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_COMMON_CLK_BOSTON) += clk-boston.o
diff --git a/drivers/clk/imgtec/clk-boston.c b/drivers/clk/imgtec/clk-boston.c
new file mode 100644
index 0000000..14795b8
--- /dev/null
+++ b/drivers/clk/imgtec/clk-boston.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+
+#include <dt-bindings/clock/boston-clock.h>
+
+#define BOSTON_PLAT_MMCMDIV 0x30
+# define BOSTON_PLAT_MMCMDIV_CLK0DIV (0xff << 0)
+# define BOSTON_PLAT_MMCMDIV_INPUT (0xff << 8)
+# define BOSTON_PLAT_MMCMDIV_MUL (0xff << 16)
+# define BOSTON_PLAT_MMCMDIV_CLK1DIV (0xff << 24)
+
+#define BOSTON_CLK_COUNT 3
+
+struct clk_boston_state {
+ struct clk *clks[BOSTON_CLK_COUNT];
+ struct clk_onecell_data onecell_data;
+};
+
+static u32 ext_field(u32 val, u32 mask)
+{
+ return (val & mask) >> (ffs(mask) - 1);
+}
+
+static void __init clk_boston_setup(struct device_node *np)
+{
+ unsigned long in_freq, cpu_freq, sys_freq;
+ uint mmcmdiv, mul, cpu_div, sys_div;
+ struct clk_boston_state *state;
+ struct regmap *regmap;
+ struct clk *clk;
+ int err;
+
+ regmap = syscon_regmap_lookup_by_phandle(np, "regmap");
+ if (IS_ERR(regmap)) {
+ pr_err("failed to find regmap\n");
+ return;
+ }
+
+ err = regmap_read(regmap, BOSTON_PLAT_MMCMDIV, &mmcmdiv);
+ if (err) {
+ pr_err("failed to read mmcm_div register: %d\n", err);
+ return;
+ }
+
+ in_freq = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_INPUT) * 1000000;
+ mul = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_MUL);
+
+ sys_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK0DIV);
+ sys_freq = mult_frac(in_freq, mul, sys_div);
+
+ cpu_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK1DIV);
+ cpu_freq = mult_frac(in_freq, mul, cpu_div);
+
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return;
+
+ clk = clk_register_fixed_rate(NULL, "input", NULL, 0, in_freq);
+ if (IS_ERR(clk)) {
+ pr_err("failed to register input clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+ state->clks[BOSTON_CLK_INPUT] = clk;
+
+ clk = clk_register_fixed_rate(NULL, "sys", "input", 0, sys_freq);
+ if (IS_ERR(clk)) {
+ pr_err("failed to register sys clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+ state->clks[BOSTON_CLK_SYS] = clk;
+
+ clk = clk_register_fixed_rate(NULL, "cpu", "input", 0, cpu_freq);
+ if (IS_ERR(clk)) {
+ pr_err("failed to register cpu clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+ state->clks[BOSTON_CLK_CPU] = clk;
+
+ state->onecell_data.clks = state->clks;
+ state->onecell_data.clk_num = BOSTON_CLK_COUNT;
+
+ err = of_clk_add_provider(np, of_clk_src_onecell_get,
+ &state->onecell_data);
+ if (err)
+ pr_err("failed to add DT provider: %d\n", err);
+}
+CLK_OF_DECLARE(clk_boston, "img,boston-clock", clk_boston_setup);
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread
* [PATCH v2 26/26] MIPS: generic: Support MIPS Boston development boards
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, devicetree, linux-kernel, Rob Herring, Mark Rutland
Add support for the MIPS Boston development board to generic kernels,
which essentially amounts to:
- Adding the device tree source for the MIPS Boston board.
- Adding a Kconfig fragment which enables the appropriate drivers for
the MIPS Boston board.
With these changes in place generic kernels will support the board by
default, and kernels with only the drivers needed for Boston enabled can
be configured by setting BOARDS=boston during configuration. For
example:
$ make ARCH=mips 64r6el_defconfig BOARDS=boston
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/img/Makefile | 7 +
arch/mips/boot/dts/img/boston.dts | 230 ++++++++++++++++++++++++++
arch/mips/configs/generic/board-boston.config | 46 ++++++
arch/mips/generic/Kconfig | 8 +
arch/mips/generic/vmlinux.its.S | 25 +++
6 files changed, 317 insertions(+)
create mode 100644 arch/mips/boot/dts/img/Makefile
create mode 100644 arch/mips/boot/dts/img/boston.dts
create mode 100644 arch/mips/configs/generic/board-boston.config
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index fc7a0a9..b9db492 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,5 +1,6 @@
dts-dirs += brcm
dts-dirs += cavium-octeon
+dts-dirs += img
dts-dirs += ingenic
dts-dirs += lantiq
dts-dirs += mti
diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile
new file mode 100644
index 0000000..ae119d3
--- /dev/null
+++ b/arch/mips/boot/dts/img/Makefile
@@ -0,0 +1,7 @@
+dtb-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += boston.dtb
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/img/boston.dts b/arch/mips/boot/dts/img/boston.dts
new file mode 100644
index 0000000..b357376
--- /dev/null
+++ b/arch/mips/boot/dts/img/boston.dts
@@ -0,0 +1,230 @@
+/dts-v1/;
+
+#include <dt-bindings/clock/boston-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "img,boston";
+
+ chosen {
+ stdout-path = "uart0:115200";
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "img,mips";
+ reg = <0>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ pci0: pci@10000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x10000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x40000000
+ 0x40000000 0 0x40000000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci0_intc 0>,
+ <0 0 0 2 &pci0_intc 1>,
+ <0 0 0 3 &pci0_intc 2>,
+ <0 0 0 4 &pci0_intc 3>;
+
+ pci0_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci1: pci@12000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x12000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x20000000
+ 0x20000000 0 0x20000000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci1_intc 0>,
+ <0 0 0 2 &pci1_intc 1>,
+ <0 0 0 3 &pci1_intc 2>,
+ <0 0 0 4 &pci1_intc 3>;
+
+ pci1_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci2: pci@14000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x14000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x16000000
+ 0x16000000 0 0x100000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci2_intc 0>,
+ <0 0 0 2 &pci2_intc 1>,
+ <0 0 0 3 &pci2_intc 2>,
+ <0 0 0 4 &pci2_intc 3>;
+
+ pci2_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ pci2_root@0,0,0 {
+ compatible = "pci10ee,7021";
+ reg = <0x00000000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_bridge@1,0,0 {
+ compatible = "pci8086,8800";
+ reg = <0x00010000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_mac@2,0,1 {
+ compatible = "pci8086,8802";
+ reg = <0x00020100 0 0 0 0>;
+ phy-reset-gpios = <&eg20t_gpio 6
+ GPIO_ACTIVE_LOW>;
+ };
+
+ eg20t_gpio: eg20t_gpio@2,0,2 {
+ compatible = "pci8086,8803";
+ reg = <0x00020200 0 0 0 0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eg20t_i2c@2,12,2 {
+ compatible = "pci8086,8817";
+ reg = <0x00026200 0 0 0 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@0x68 {
+ compatible = "st,m41t81s";
+ reg = <0x68>;
+ };
+ };
+ };
+ };
+ };
+
+ gic: interrupt-controller@16120000 {
+ compatible = "mti,gic";
+ reg = <0x16120000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ cdmm@16140000 {
+ compatible = "mti,mips-cdmm";
+ reg = <0x16140000 0x8000>;
+ };
+
+ cpc@16200000 {
+ compatible = "mti,mips-cpc";
+ reg = <0x16200000 0x8000>;
+ };
+
+ plat_regs: system-controller@17ffd000 {
+ compatible = "img,boston-platform-regs", "syscon";
+ reg = <0x17ffd000 0x1000>;
+ u-boot,dm-pre-reloc;
+ };
+
+ clk_boston: clock {
+ compatible = "img,boston-clock";
+ #clock-cells = <1>;
+ regmap = <&plat_regs>;
+ u-boot,dm-pre-reloc;
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&plat_regs>;
+ offset = <0x10>;
+ mask = <0x10>;
+ };
+
+ uart0: uart@17ffe000 {
+ compatible = "ns16550a";
+ reg = <0x17ffe000 0x1000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&clk_boston BOSTON_CLK_SYS>;
+
+ u-boot,dm-pre-reloc;
+ };
+
+ lcd: lcd@17fff000 {
+ compatible = "img,boston-lcd";
+ reg = <0x17fff000 0x8>;
+ };
+};
diff --git a/arch/mips/configs/generic/board-boston.config b/arch/mips/configs/generic/board-boston.config
new file mode 100644
index 0000000..09864a4
--- /dev/null
+++ b/arch/mips/configs/generic/board-boston.config
@@ -0,0 +1,46 @@
+CONFIG_FIT_IMAGE_FDT_BOSTON=y
+
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SCSI=y
+
+CONFIG_AUXDISPLAY=y
+CONFIG_IMG_ASCII_LCD=y
+
+CONFIG_COMMON_CLK_BOSTON=y
+
+CONFIG_DMADEVICES=y
+CONFIG_PCH_DMA=y
+
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCH=y
+
+CONFIG_I2C=y
+CONFIG_I2C_EG20T=y
+
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+
+CONFIG_NETDEVICES=y
+CONFIG_PCH_GBE=y
+
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_XILINX=y
+
+CONFIG_PCH_PHUB=y
+
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_SPI=y
+CONFIG_SPI_TOPCLIFF_PCH=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index a606b3f..16eb939 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -16,4 +16,12 @@ config LEGACY_BOARD_SEAD3
Enable this to include support for booting on MIPS SEAD-3 FPGA-based
development boards, which boot using a legacy boot protocol.
+config FIT_IMAGE_FDT_BOSTON
+ bool "Include FDT for MIPS Boston boards"
+ help
+ Enable this to include the FDT for the MIPS Boston development board
+ from Imagination Technologies in the FIT kernel image. You should
+ enable this if you wish to boot on a MIPS Boston board, as it is
+ expected by the bootloader.
+
endif
diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
index f67fbf1..3390e2f 100644
--- a/arch/mips/generic/vmlinux.its.S
+++ b/arch/mips/generic/vmlinux.its.S
@@ -29,3 +29,28 @@
};
};
};
+
+#ifdef CONFIG_FIT_IMAGE_FDT_BOSTON
+/ {
+ images {
+ fdt@boston {
+ description = "img,boston Device Tree";
+ data = /incbin/("boot/dts/img/boston.dtb");
+ type = "flat_dt";
+ arch = "mips";
+ compression = "none";
+ hash@0 {
+ algo = "sha1";
+ };
+ };
+ };
+
+ configurations {
+ conf@boston {
+ description = "Boston Linux kernel";
+ kernel = "kernel@0";
+ fdt = "fdt@boston";
+ };
+ };
+};
+#endif /* CONFIG_FIT_IMAGE_FDT_BOSTON */
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 26/26] MIPS: generic: Support MIPS Boston development boards
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips, Ralf Baechle
Cc: Paul Burton, devicetree, linux-kernel, Rob Herring, Mark Rutland
Add support for the MIPS Boston development board to generic kernels,
which essentially amounts to:
- Adding the device tree source for the MIPS Boston board.
- Adding a Kconfig fragment which enables the appropriate drivers for
the MIPS Boston board.
With these changes in place generic kernels will support the board by
default, and kernels with only the drivers needed for Boston enabled can
be configured by setting BOARDS=boston during configuration. For
example:
$ make ARCH=mips 64r6el_defconfig BOARDS=boston
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
Changes in v2: None
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/img/Makefile | 7 +
arch/mips/boot/dts/img/boston.dts | 230 ++++++++++++++++++++++++++
arch/mips/configs/generic/board-boston.config | 46 ++++++
arch/mips/generic/Kconfig | 8 +
arch/mips/generic/vmlinux.its.S | 25 +++
6 files changed, 317 insertions(+)
create mode 100644 arch/mips/boot/dts/img/Makefile
create mode 100644 arch/mips/boot/dts/img/boston.dts
create mode 100644 arch/mips/configs/generic/board-boston.config
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index fc7a0a9..b9db492 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,5 +1,6 @@
dts-dirs += brcm
dts-dirs += cavium-octeon
+dts-dirs += img
dts-dirs += ingenic
dts-dirs += lantiq
dts-dirs += mti
diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile
new file mode 100644
index 0000000..ae119d3
--- /dev/null
+++ b/arch/mips/boot/dts/img/Makefile
@@ -0,0 +1,7 @@
+dtb-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += boston.dtb
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/img/boston.dts b/arch/mips/boot/dts/img/boston.dts
new file mode 100644
index 0000000..b357376
--- /dev/null
+++ b/arch/mips/boot/dts/img/boston.dts
@@ -0,0 +1,230 @@
+/dts-v1/;
+
+#include <dt-bindings/clock/boston-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "img,boston";
+
+ chosen {
+ stdout-path = "uart0:115200";
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "img,mips";
+ reg = <0>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ pci0: pci@10000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x10000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x40000000
+ 0x40000000 0 0x40000000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci0_intc 0>,
+ <0 0 0 2 &pci0_intc 1>,
+ <0 0 0 3 &pci0_intc 2>,
+ <0 0 0 4 &pci0_intc 3>;
+
+ pci0_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci1: pci@12000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x12000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x20000000
+ 0x20000000 0 0x20000000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci1_intc 0>,
+ <0 0 0 2 &pci1_intc 1>,
+ <0 0 0 3 &pci1_intc 2>,
+ <0 0 0 4 &pci1_intc 3>;
+
+ pci1_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci2: pci@14000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x14000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x16000000
+ 0x16000000 0 0x100000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci2_intc 0>,
+ <0 0 0 2 &pci2_intc 1>,
+ <0 0 0 3 &pci2_intc 2>,
+ <0 0 0 4 &pci2_intc 3>;
+
+ pci2_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ pci2_root@0,0,0 {
+ compatible = "pci10ee,7021";
+ reg = <0x00000000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_bridge@1,0,0 {
+ compatible = "pci8086,8800";
+ reg = <0x00010000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_mac@2,0,1 {
+ compatible = "pci8086,8802";
+ reg = <0x00020100 0 0 0 0>;
+ phy-reset-gpios = <&eg20t_gpio 6
+ GPIO_ACTIVE_LOW>;
+ };
+
+ eg20t_gpio: eg20t_gpio@2,0,2 {
+ compatible = "pci8086,8803";
+ reg = <0x00020200 0 0 0 0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eg20t_i2c@2,12,2 {
+ compatible = "pci8086,8817";
+ reg = <0x00026200 0 0 0 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@0x68 {
+ compatible = "st,m41t81s";
+ reg = <0x68>;
+ };
+ };
+ };
+ };
+ };
+
+ gic: interrupt-controller@16120000 {
+ compatible = "mti,gic";
+ reg = <0x16120000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ cdmm@16140000 {
+ compatible = "mti,mips-cdmm";
+ reg = <0x16140000 0x8000>;
+ };
+
+ cpc@16200000 {
+ compatible = "mti,mips-cpc";
+ reg = <0x16200000 0x8000>;
+ };
+
+ plat_regs: system-controller@17ffd000 {
+ compatible = "img,boston-platform-regs", "syscon";
+ reg = <0x17ffd000 0x1000>;
+ u-boot,dm-pre-reloc;
+ };
+
+ clk_boston: clock {
+ compatible = "img,boston-clock";
+ #clock-cells = <1>;
+ regmap = <&plat_regs>;
+ u-boot,dm-pre-reloc;
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&plat_regs>;
+ offset = <0x10>;
+ mask = <0x10>;
+ };
+
+ uart0: uart@17ffe000 {
+ compatible = "ns16550a";
+ reg = <0x17ffe000 0x1000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&clk_boston BOSTON_CLK_SYS>;
+
+ u-boot,dm-pre-reloc;
+ };
+
+ lcd: lcd@17fff000 {
+ compatible = "img,boston-lcd";
+ reg = <0x17fff000 0x8>;
+ };
+};
diff --git a/arch/mips/configs/generic/board-boston.config b/arch/mips/configs/generic/board-boston.config
new file mode 100644
index 0000000..09864a4
--- /dev/null
+++ b/arch/mips/configs/generic/board-boston.config
@@ -0,0 +1,46 @@
+CONFIG_FIT_IMAGE_FDT_BOSTON=y
+
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SCSI=y
+
+CONFIG_AUXDISPLAY=y
+CONFIG_IMG_ASCII_LCD=y
+
+CONFIG_COMMON_CLK_BOSTON=y
+
+CONFIG_DMADEVICES=y
+CONFIG_PCH_DMA=y
+
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCH=y
+
+CONFIG_I2C=y
+CONFIG_I2C_EG20T=y
+
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+
+CONFIG_NETDEVICES=y
+CONFIG_PCH_GBE=y
+
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_XILINX=y
+
+CONFIG_PCH_PHUB=y
+
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_SPI=y
+CONFIG_SPI_TOPCLIFF_PCH=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index a606b3f..16eb939 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -16,4 +16,12 @@ config LEGACY_BOARD_SEAD3
Enable this to include support for booting on MIPS SEAD-3 FPGA-based
development boards, which boot using a legacy boot protocol.
+config FIT_IMAGE_FDT_BOSTON
+ bool "Include FDT for MIPS Boston boards"
+ help
+ Enable this to include the FDT for the MIPS Boston development board
+ from Imagination Technologies in the FIT kernel image. You should
+ enable this if you wish to boot on a MIPS Boston board, as it is
+ expected by the bootloader.
+
endif
diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
index f67fbf1..3390e2f 100644
--- a/arch/mips/generic/vmlinux.its.S
+++ b/arch/mips/generic/vmlinux.its.S
@@ -29,3 +29,28 @@
};
};
};
+
+#ifdef CONFIG_FIT_IMAGE_FDT_BOSTON
+/ {
+ images {
+ fdt@boston {
+ description = "img,boston Device Tree";
+ data = /incbin/("boot/dts/img/boston.dtb");
+ type = "flat_dt";
+ arch = "mips";
+ compression = "none";
+ hash@0 {
+ algo = "sha1";
+ };
+ };
+ };
+
+ configurations {
+ conf@boston {
+ description = "Boston Linux kernel";
+ kernel = "kernel@0";
+ fdt = "fdt@boston";
+ };
+ };
+};
+#endif /* CONFIG_FIT_IMAGE_FDT_BOSTON */
--
2.9.3
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH v2 26/26] MIPS: generic: Support MIPS Boston development boards
@ 2016-08-30 17:29 ` Paul Burton
0 siblings, 0 replies; 58+ messages in thread
From: Paul Burton @ 2016-08-30 17:29 UTC (permalink / raw)
To: linux-mips-6z/3iImG2C8G8FEW9MqTrA, Ralf Baechle
Cc: Paul Burton, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring, Mark Rutland
Add support for the MIPS Boston development board to generic kernels,
which essentially amounts to:
- Adding the device tree source for the MIPS Boston board.
- Adding a Kconfig fragment which enables the appropriate drivers for
the MIPS Boston board.
With these changes in place generic kernels will support the board by
default, and kernels with only the drivers needed for Boston enabled can
be configured by setting BOARDS=boston during configuration. For
example:
$ make ARCH=mips 64r6el_defconfig BOARDS=boston
Signed-off-by: Paul Burton <paul.burton-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
---
Changes in v2: None
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/img/Makefile | 7 +
arch/mips/boot/dts/img/boston.dts | 230 ++++++++++++++++++++++++++
arch/mips/configs/generic/board-boston.config | 46 ++++++
arch/mips/generic/Kconfig | 8 +
arch/mips/generic/vmlinux.its.S | 25 +++
6 files changed, 317 insertions(+)
create mode 100644 arch/mips/boot/dts/img/Makefile
create mode 100644 arch/mips/boot/dts/img/boston.dts
create mode 100644 arch/mips/configs/generic/board-boston.config
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index fc7a0a9..b9db492 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,5 +1,6 @@
dts-dirs += brcm
dts-dirs += cavium-octeon
+dts-dirs += img
dts-dirs += ingenic
dts-dirs += lantiq
dts-dirs += mti
diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile
new file mode 100644
index 0000000..ae119d3
--- /dev/null
+++ b/arch/mips/boot/dts/img/Makefile
@@ -0,0 +1,7 @@
+dtb-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += boston.dtb
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/img/boston.dts b/arch/mips/boot/dts/img/boston.dts
new file mode 100644
index 0000000..b357376
--- /dev/null
+++ b/arch/mips/boot/dts/img/boston.dts
@@ -0,0 +1,230 @@
+/dts-v1/;
+
+#include <dt-bindings/clock/boston-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "img,boston";
+
+ chosen {
+ stdout-path = "uart0:115200";
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "img,mips";
+ reg = <0>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ pci0: pci@10000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x10000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x40000000
+ 0x40000000 0 0x40000000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci0_intc 0>,
+ <0 0 0 2 &pci0_intc 1>,
+ <0 0 0 3 &pci0_intc 2>,
+ <0 0 0 4 &pci0_intc 3>;
+
+ pci0_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci1: pci@12000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x12000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x20000000
+ 0x20000000 0 0x20000000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci1_intc 0>,
+ <0 0 0 2 &pci1_intc 1>,
+ <0 0 0 3 &pci1_intc 2>,
+ <0 0 0 4 &pci1_intc 3>;
+
+ pci1_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci2: pci@14000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x14000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x16000000
+ 0x16000000 0 0x100000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci2_intc 0>,
+ <0 0 0 2 &pci2_intc 1>,
+ <0 0 0 3 &pci2_intc 2>,
+ <0 0 0 4 &pci2_intc 3>;
+
+ pci2_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ pci2_root@0,0,0 {
+ compatible = "pci10ee,7021";
+ reg = <0x00000000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_bridge@1,0,0 {
+ compatible = "pci8086,8800";
+ reg = <0x00010000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_mac@2,0,1 {
+ compatible = "pci8086,8802";
+ reg = <0x00020100 0 0 0 0>;
+ phy-reset-gpios = <&eg20t_gpio 6
+ GPIO_ACTIVE_LOW>;
+ };
+
+ eg20t_gpio: eg20t_gpio@2,0,2 {
+ compatible = "pci8086,8803";
+ reg = <0x00020200 0 0 0 0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eg20t_i2c@2,12,2 {
+ compatible = "pci8086,8817";
+ reg = <0x00026200 0 0 0 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@0x68 {
+ compatible = "st,m41t81s";
+ reg = <0x68>;
+ };
+ };
+ };
+ };
+ };
+
+ gic: interrupt-controller@16120000 {
+ compatible = "mti,gic";
+ reg = <0x16120000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ cdmm@16140000 {
+ compatible = "mti,mips-cdmm";
+ reg = <0x16140000 0x8000>;
+ };
+
+ cpc@16200000 {
+ compatible = "mti,mips-cpc";
+ reg = <0x16200000 0x8000>;
+ };
+
+ plat_regs: system-controller@17ffd000 {
+ compatible = "img,boston-platform-regs", "syscon";
+ reg = <0x17ffd000 0x1000>;
+ u-boot,dm-pre-reloc;
+ };
+
+ clk_boston: clock {
+ compatible = "img,boston-clock";
+ #clock-cells = <1>;
+ regmap = <&plat_regs>;
+ u-boot,dm-pre-reloc;
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&plat_regs>;
+ offset = <0x10>;
+ mask = <0x10>;
+ };
+
+ uart0: uart@17ffe000 {
+ compatible = "ns16550a";
+ reg = <0x17ffe000 0x1000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&clk_boston BOSTON_CLK_SYS>;
+
+ u-boot,dm-pre-reloc;
+ };
+
+ lcd: lcd@17fff000 {
+ compatible = "img,boston-lcd";
+ reg = <0x17fff000 0x8>;
+ };
+};
diff --git a/arch/mips/configs/generic/board-boston.config b/arch/mips/configs/generic/board-boston.config
new file mode 100644
index 0000000..09864a4
--- /dev/null
+++ b/arch/mips/configs/generic/board-boston.config
@@ -0,0 +1,46 @@
+CONFIG_FIT_IMAGE_FDT_BOSTON=y
+
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SCSI=y
+
+CONFIG_AUXDISPLAY=y
+CONFIG_IMG_ASCII_LCD=y
+
+CONFIG_COMMON_CLK_BOSTON=y
+
+CONFIG_DMADEVICES=y
+CONFIG_PCH_DMA=y
+
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCH=y
+
+CONFIG_I2C=y
+CONFIG_I2C_EG20T=y
+
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+
+CONFIG_NETDEVICES=y
+CONFIG_PCH_GBE=y
+
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_XILINX=y
+
+CONFIG_PCH_PHUB=y
+
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_SPI=y
+CONFIG_SPI_TOPCLIFF_PCH=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index a606b3f..16eb939 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -16,4 +16,12 @@ config LEGACY_BOARD_SEAD3
Enable this to include support for booting on MIPS SEAD-3 FPGA-based
development boards, which boot using a legacy boot protocol.
+config FIT_IMAGE_FDT_BOSTON
+ bool "Include FDT for MIPS Boston boards"
+ help
+ Enable this to include the FDT for the MIPS Boston development board
+ from Imagination Technologies in the FIT kernel image. You should
+ enable this if you wish to boot on a MIPS Boston board, as it is
+ expected by the bootloader.
+
endif
diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
index f67fbf1..3390e2f 100644
--- a/arch/mips/generic/vmlinux.its.S
+++ b/arch/mips/generic/vmlinux.its.S
@@ -29,3 +29,28 @@
};
};
};
+
+#ifdef CONFIG_FIT_IMAGE_FDT_BOSTON
+/ {
+ images {
+ fdt@boston {
+ description = "img,boston Device Tree";
+ data = /incbin/("boot/dts/img/boston.dtb");
+ type = "flat_dt";
+ arch = "mips";
+ compression = "none";
+ hash@0 {
+ algo = "sha1";
+ };
+ };
+ };
+
+ configurations {
+ conf@boston {
+ description = "Boston Linux kernel";
+ kernel = "kernel@0";
+ fdt = "fdt@boston";
+ };
+ };
+};
+#endif /* CONFIG_FIT_IMAGE_FDT_BOSTON */
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 58+ messages in thread