From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> To: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>, Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>, Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> Subject: [PATCH 3/5] ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 Date: Sun, 11 Sep 2016 20:23:25 +0200 [thread overview] Message-ID: <20160911182327.824-4-hdegoede@redhat.com> (raw) In-Reply-To: <20160911182327.824-1-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> Add a node enabling the gsl1680 touchscreen controller found on sun8i-a23-polaroid-mid2407pxe03 tablets. Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> --- Changes in v2: -Make ldo_io1 vddio-supply for the touchscreen rather then marking it as regulator-always-on --- arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts index 4789aac..6662127 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -90,3 +90,22 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_ldo_io1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-touchscreen"; + status = "okay"; +}; + +&touchscreen { + reg = <0x40>; + compatible = "silead,gsl1680"; + firmware-name = "gsl1680-polaroid-mid2407pxe03.fw"; + touchscreen-size-x = <960>; + touchscreen-size-y = <640>; + touchscreen-inverted-x; + touchscreen-inverted-y; + vddio-supply = <®_ldo_io1>; + status = "okay"; +}; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: hdegoede@redhat.com (Hans de Goede) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/5] ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 Date: Sun, 11 Sep 2016 20:23:25 +0200 [thread overview] Message-ID: <20160911182327.824-4-hdegoede@redhat.com> (raw) In-Reply-To: <20160911182327.824-1-hdegoede@redhat.com> Add a node enabling the gsl1680 touchscreen controller found on sun8i-a23-polaroid-mid2407pxe03 tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: -Make ldo_io1 vddio-supply for the touchscreen rather then marking it as regulator-always-on --- arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts index 4789aac..6662127 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -90,3 +90,22 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_ldo_io1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-touchscreen"; + status = "okay"; +}; + +&touchscreen { + reg = <0x40>; + compatible = "silead,gsl1680"; + firmware-name = "gsl1680-polaroid-mid2407pxe03.fw"; + touchscreen-size-x = <960>; + touchscreen-size-y = <640>; + touchscreen-inverted-x; + touchscreen-inverted-y; + vddio-supply = <®_ldo_io1>; + status = "okay"; +}; -- 2.9.3
next prev parent reply other threads:[~2016-09-11 18:23 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-09-11 18:23 [PATCH 0/5] ARM: dts: sun8i: Add touchscreen node to various tablets Hans de Goede 2016-09-11 18:23 ` Hans de Goede [not found] ` <20160911182327.824-1-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-09-11 18:23 ` [PATCH 1/5] ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h Hans de Goede 2016-09-11 18:23 ` Hans de Goede 2016-09-11 18:23 ` [PATCH 2/5] ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz Hans de Goede 2016-09-11 18:23 ` Hans de Goede 2016-09-11 18:23 ` Hans de Goede [this message] 2016-09-11 18:23 ` [PATCH 3/5] ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 Hans de Goede 2016-09-11 18:23 ` [PATCH 4/5] ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04 Hans de Goede 2016-09-11 18:23 ` Hans de Goede 2016-09-11 18:23 ` [PATCH 5/5] ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h Hans de Goede 2016-09-11 18:23 ` Hans de Goede 2016-09-12 6:09 ` [PATCH 0/5] ARM: dts: sun8i: Add touchscreen node to various tablets Chen-Yu Tsai 2016-09-12 6:09 ` Chen-Yu Tsai 2016-09-13 7:59 ` Maxime Ripard 2016-09-13 7:59 ` Maxime Ripard 2016-09-13 8:06 ` Hans de Goede 2016-09-13 8:06 ` Hans de Goede [not found] ` <fee7e6fe-d22b-9233-121e-b403d6ee20f1-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> 2016-09-14 16:14 ` Maxime Ripard 2016-09-14 16:14 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20160911182327.824-4-hdegoede@redhat.com \ --to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \ --cc=wens-jdAy2FN1RRM@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.