[PATCH v2 1/2] of: Make of_find_property_value_of_size take a length range

[PATCH v2 1/2] of: Make of_find_property_value_of_size take a length range

[Richard Fitzgerald]

In preparation for adding variable-length array reads, change
of_find_property_value_of_size so that it takes an optional
maximum length. If the maximum is passed as 0, the behaviour is
unchanged and it will return a property if it's >= the requested
minimum length. If maximum is non-zero it will only return a
property whose length is min <= l <= max.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
 drivers/of/base.c | 39 +++++++++++++++++++++++++++++----------
 1 file changed, 29 insertions(+), 10 deletions(-)

diff --git a/drivers/of/base.c b/drivers/of/base.c
index 3ce6953..b853737 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1146,16 +1146,18 @@ EXPORT_SYMBOL_GPL(of_property_count_elems_of_size);
  *
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
- * @len:	requested length of property value
+ * @min:	minimum allowed length of property value
+ * @max:	maximum allowed length of property value (0 means unlimited)
+ * @len:	if !=NULL, actual length is written to here
  *
  * Search for a property in a device node and valid the requested size.
  * Returns the property value on success, -EINVAL if the property does not
  *  exist, -ENODATA if property does not have a value, and -EOVERFLOW if the
- * property data isn't large enough.
+ * property data is too small or too large.
  *
  */
 static void *of_find_property_value_of_size(const struct device_node *np,
-			const char *propname, u32 len)
+			const char *propname, u32 min, u32 max, size_t *len)
 {
 	struct property *prop = of_find_property(np, propname, NULL);
 
@@ -1163,9 +1165,14 @@ static void *of_find_property_value_of_size(const struct device_node *np,
 		return ERR_PTR(-EINVAL);
 	if (!prop->value)
 		return ERR_PTR(-ENODATA);
-	if (len > prop->length)
+	if (prop->length < min)
+		return ERR_PTR(-EOVERFLOW);
+	if (max && prop->length > max)
 		return ERR_PTR(-EOVERFLOW);
 
+	if (len)
+		*len = prop->length;
+
 	return prop->value;
 }
 
@@ -1189,7 +1196,9 @@ int of_property_read_u32_index(const struct device_node *np,
 				       u32 index, u32 *out_value)
 {
 	const u32 *val = of_find_property_value_of_size(np, propname,
-					((index + 1) * sizeof(*out_value)));
+					((index + 1) * sizeof(*out_value)),
+					0,
+					NULL);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
@@ -1221,7 +1230,9 @@ int of_property_read_u8_array(const struct device_node *np,
 			const char *propname, u8 *out_values, size_t sz)
 {
 	const u8 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)));
+						(sz * sizeof(*out_values)),
+						0,
+						NULL);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
@@ -1254,7 +1265,9 @@ int of_property_read_u16_array(const struct device_node *np,
 			const char *propname, u16 *out_values, size_t sz)
 {
 	const __be16 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)));
+						(sz * sizeof(*out_values)),
+						0,
+						NULL);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
@@ -1286,7 +1299,9 @@ int of_property_read_u32_array(const struct device_node *np,
 			       size_t sz)
 {
 	const __be32 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)));
+						(sz * sizeof(*out_values)),
+						0,
+						NULL);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
@@ -1314,7 +1329,9 @@ int of_property_read_u64(const struct device_node *np, const char *propname,
 			 u64 *out_value)
 {
 	const __be32 *val = of_find_property_value_of_size(np, propname,
-						sizeof(*out_value));
+						sizeof(*out_value),
+						0,
+						NULL);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
@@ -1345,7 +1362,9 @@ int of_property_read_u64_array(const struct device_node *np,
 			       size_t sz)
 {
 	const __be32 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)));
+						(sz * sizeof(*out_values)),
+						0,
+						NULL);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
-- 
1.9.1

[PATCH v2 1/2] of: Make of_find_property_value_of_size take a length range

[Richard Fitzgerald]

In preparation for adding variable-length array reads, change
of_find_property_value_of_size so that it takes an optional
maximum length. If the maximum is passed as 0, the behaviour is
unchanged and it will return a property if it's >= the requested
minimum length. If maximum is non-zero it will only return a
property whose length is min <= l <= max.

Signed-off-by: Richard Fitzgerald <rf-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
---
 drivers/of/base.c | 39 +++++++++++++++++++++++++++++----------
 1 file changed, 29 insertions(+), 10 deletions(-)

diff --git a/drivers/of/base.c b/drivers/of/base.c
index 3ce6953..b853737 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1146,16 +1146,18 @@ EXPORT_SYMBOL_GPL(of_property_count_elems_of_size);
  *
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
- * @len:	requested length of property value
+ * @min:	minimum allowed length of property value
+ * @max:	maximum allowed length of property value (0 means unlimited)
+ * @len:	if !=NULL, actual length is written to here
  *
  * Search for a property in a device node and valid the requested size.
  * Returns the property value on success, -EINVAL if the property does not
  *  exist, -ENODATA if property does not have a value, and -EOVERFLOW if the
- * property data isn't large enough.
+ * property data is too small or too large.
  *
  */
 static void *of_find_property_value_of_size(const struct device_node *np,
-			const char *propname, u32 len)
+			const char *propname, u32 min, u32 max, size_t *len)
 {
 	struct property *prop = of_find_property(np, propname, NULL);
 
@@ -1163,9 +1165,14 @@ static void *of_find_property_value_of_size(const struct device_node *np,
 		return ERR_PTR(-EINVAL);
 	if (!prop->value)
 		return ERR_PTR(-ENODATA);
-	if (len > prop->length)
+	if (prop->length < min)
+		return ERR_PTR(-EOVERFLOW);
+	if (max && prop->length > max)
 		return ERR_PTR(-EOVERFLOW);
 
+	if (len)
+		*len = prop->length;
+
 	return prop->value;
 }
 
@@ -1189,7 +1196,9 @@ int of_property_read_u32_index(const struct device_node *np,
 				       u32 index, u32 *out_value)
 {
 	const u32 *val = of_find_property_value_of_size(np, propname,
-					((index + 1) * sizeof(*out_value)));
+					((index + 1) * sizeof(*out_value)),
+					0,
+					NULL);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
@@ -1221,7 +1230,9 @@ int of_property_read_u8_array(const struct device_node *np,
 			const char *propname, u8 *out_values, size_t sz)
 {
 	const u8 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)));
+						(sz * sizeof(*out_values)),
+						0,
+						NULL);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
@@ -1254,7 +1265,9 @@ int of_property_read_u16_array(const struct device_node *np,
 			const char *propname, u16 *out_values, size_t sz)
 {
 	const __be16 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)));
+						(sz * sizeof(*out_values)),
+						0,
+						NULL);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
@@ -1286,7 +1299,9 @@ int of_property_read_u32_array(const struct device_node *np,
 			       size_t sz)
 {
 	const __be32 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)));
+						(sz * sizeof(*out_values)),
+						0,
+						NULL);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
@@ -1314,7 +1329,9 @@ int of_property_read_u64(const struct device_node *np, const char *propname,
 			 u64 *out_value)
 {
 	const __be32 *val = of_find_property_value_of_size(np, propname,
-						sizeof(*out_value));
+						sizeof(*out_value),
+						0,
+						NULL);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
@@ -1345,7 +1362,9 @@ int of_property_read_u64_array(const struct device_node *np,
 			       size_t sz)
 {
 	const __be32 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)));
+						(sz * sizeof(*out_values)),
+						0,
+						NULL);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 2/2] of: Add array read functions with min/max size limits

[Richard Fitzgerald]

Add a new set of array reading functions that take a minimum and
maximum size limit and will fail if the property size is not within
the size limits. This makes it more convenient for drivers that
use variable-size DT arrays which must be bounded at both ends -
data must be at least N entries but must not overflow the array
it is being copied into. It is also more efficient than making this
functionality out of existing public functions and avoids duplication.

The existing array functions have been left in the API, since there
are a very large number of clients of those functions and their
existing functionality is still useful. This avoids turning a small
API improvement into a major kernel rework.

The old functions have been turned into mininmal static inlines calling
the new functions. The old functions had no upper limit on the actual
size of the dts entry, to preserve this functionality rather than keeping
two near-identical implementations, if the new function is called with
max=0 there is no limit on the size of the dts entry but only the min
number of elements are read.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
 drivers/of/base.c  | 156 ++++++++++++++++++++++++++++++++++-------------------
 include/linux/of.h | 144 ++++++++++++++++++++++++++++++++++++++++++++-----
 2 files changed, 234 insertions(+), 66 deletions(-)

diff --git a/drivers/of/base.c b/drivers/of/base.c
index b853737..a0bccb5 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1209,108 +1209,145 @@ int of_property_read_u32_index(const struct device_node *np,
 EXPORT_SYMBOL_GPL(of_property_read_u32_index);
 
 /**
- * of_property_read_u8_array - Find and read an array of u8 from a property.
+ * of_property_read_variable_u8_array - Find and read an array of u8 from a
+ * property, with bounds on the minimum and maximum array size.
  *
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
  * @out_values:	pointer to return value, modified only if return value is 0.
- * @sz:		number of array elements to read
+ * @sz_min:	minimum number of array elements to read
+ * @sz_max:	maximum number of array elements to read, if zero there is no
+ *		upper limit on the number of elements in the dts entry but only
+ *		sz_min will be read.
  *
  * Search for a property in a device node and read 8-bit value(s) from
- * it. Returns 0 on success, -EINVAL if the property does not exist,
- * -ENODATA if property does not have a value, and -EOVERFLOW if the
- * property data isn't large enough.
+ * it. Returns number of elements read on success, -EINVAL if the property
+ * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
+ * if the property data is smaller than sz_min or longer than sz_max.
  *
  * dts entry of array should be like:
  *	property = /bits/ 8 <0x50 0x60 0x70>;
  *
  * The out_values is modified only if a valid u8 value can be decoded.
  */
-int of_property_read_u8_array(const struct device_node *np,
-			const char *propname, u8 *out_values, size_t sz)
+int of_property_read_variable_u8_array(const struct device_node *np,
+					const char *propname, u8 *out_values,
+					size_t sz_min, size_t sz_max)
 {
+	size_t sz, count;
 	const u8 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)),
-						0,
-						NULL);
+						(sz_min * sizeof(*out_values)),
+						(sz_max * sizeof(*out_values)),
+						&sz);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
 
-	while (sz--)
+	if (!sz_max)
+		sz = sz_min;
+	else
+		sz /= sizeof(*out_values);
+
+	count = sz;
+	while (count--)
 		*out_values++ = *val++;
-	return 0;
+
+	return sz;
 }
-EXPORT_SYMBOL_GPL(of_property_read_u8_array);
+EXPORT_SYMBOL_GPL(of_property_read_variable_u8_array);
 
 /**
- * of_property_read_u16_array - Find and read an array of u16 from a property.
+ * of_property_read_variable_u16_array - Find and read an array of u16 from a
+ * property, with bounds on the minimum and maximum array size.
  *
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
  * @out_values:	pointer to return value, modified only if return value is 0.
- * @sz:		number of array elements to read
+ * @sz_min:	minimum number of array elements to read
+ * @sz_max:	maximum number of array elements to read, if zero there is no
+ *		upper limit on the number of elements in the dts entry but only
+ *		sz_min will be read.
  *
  * Search for a property in a device node and read 16-bit value(s) from
- * it. Returns 0 on success, -EINVAL if the property does not exist,
- * -ENODATA if property does not have a value, and -EOVERFLOW if the
- * property data isn't large enough.
+ * it. Returns number of elements read on success, -EINVAL if the property
+ * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
+ * if the property data is smaller than sz_min or longer than sz_max.
  *
  * dts entry of array should be like:
  *	property = /bits/ 16 <0x5000 0x6000 0x7000>;
  *
  * The out_values is modified only if a valid u16 value can be decoded.
  */
-int of_property_read_u16_array(const struct device_node *np,
-			const char *propname, u16 *out_values, size_t sz)
+int of_property_read_variable_u16_array(const struct device_node *np,
+					const char *propname, u16 *out_values,
+					size_t sz_min, size_t sz_max)
 {
+	size_t sz, count;
 	const __be16 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)),
-						0,
-						NULL);
+						(sz_min * sizeof(*out_values)),
+						(sz_max * sizeof(*out_values)),
+						&sz);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
 
-	while (sz--)
+	if (!sz_max)
+		sz = sz_min;
+	else
+		sz /= sizeof(*out_values);
+
+	count = sz;
+	while (count--)
 		*out_values++ = be16_to_cpup(val++);
-	return 0;
+
+	return sz;
 }
-EXPORT_SYMBOL_GPL(of_property_read_u16_array);
+EXPORT_SYMBOL_GPL(of_property_read_variable_u16_array);
 
 /**
- * of_property_read_u32_array - Find and read an array of 32 bit integers
- * from a property.
+ * of_property_read_variable_u32_array - Find and read an array of 32 bit
+ * integers from a property, with bounds on the minimum and maximum array size.
  *
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
  * @out_values:	pointer to return value, modified only if return value is 0.
- * @sz:		number of array elements to read
+ * @sz_min:	minimum number of array elements to read
+ * @sz_max:	maximum number of array elements to read, if zero there is no
+ *		upper limit on the number of elements in the dts entry but only
+ *		sz_min will be read.
  *
  * Search for a property in a device node and read 32-bit value(s) from
- * it. Returns 0 on success, -EINVAL if the property does not exist,
- * -ENODATA if property does not have a value, and -EOVERFLOW if the
- * property data isn't large enough.
+ * it. Returns number of elements read on success, -EINVAL if the property
+ * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
+ * if the property data is smaller than sz_min or longer than sz_max.
  *
  * The out_values is modified only if a valid u32 value can be decoded.
  */
-int of_property_read_u32_array(const struct device_node *np,
+int of_property_read_variable_u32_array(const struct device_node *np,
 			       const char *propname, u32 *out_values,
-			       size_t sz)
+			       size_t sz_min, size_t sz_max)
 {
+	size_t sz, count;
 	const __be32 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)),
-						0,
-						NULL);
+						(sz_min * sizeof(*out_values)),
+						(sz_max * sizeof(*out_values)),
+						&sz);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
 
-	while (sz--)
+	if (!sz_max)
+		sz = sz_min;
+	else
+		sz /= sizeof(*out_values);
+
+	count = sz;
+	while (count--)
 		*out_values++ = be32_to_cpup(val++);
-	return 0;
+
+	return sz;
 }
-EXPORT_SYMBOL_GPL(of_property_read_u32_array);
+EXPORT_SYMBOL_GPL(of_property_read_variable_u32_array);
 
 /**
  * of_property_read_u64 - Find and read a 64 bit integer from a property
@@ -1342,40 +1379,51 @@ int of_property_read_u64(const struct device_node *np, const char *propname,
 EXPORT_SYMBOL_GPL(of_property_read_u64);
 
 /**
- * of_property_read_u64_array - Find and read an array of 64 bit integers
- * from a property.
+ * of_property_read_variable_u64_array - Find and read an array of 64 bit
+ * integers from a property, with bounds on the minimum and maximum array size.
  *
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
  * @out_values:	pointer to return value, modified only if return value is 0.
- * @sz:		number of array elements to read
+ * @sz_min:	minimum number of array elements to read
+ * @sz_max:	maximum number of array elements to read, if zero there is no
+ *		upper limit on the number of elements in the dts entry but only
+ *		sz_min will be read.
  *
  * Search for a property in a device node and read 64-bit value(s) from
- * it. Returns 0 on success, -EINVAL if the property does not exist,
- * -ENODATA if property does not have a value, and -EOVERFLOW if the
- * property data isn't large enough.
+ * it. Returns number of elements read on success, -EINVAL if the property
+ * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
+ * if the property data is smaller than sz_min or longer than sz_max.
  *
  * The out_values is modified only if a valid u64 value can be decoded.
  */
-int of_property_read_u64_array(const struct device_node *np,
+int of_property_read_variable_u64_array(const struct device_node *np,
 			       const char *propname, u64 *out_values,
-			       size_t sz)
+			       size_t sz_min, size_t sz_max)
 {
+	size_t sz, count;
 	const __be32 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)),
-						0,
-						NULL);
+						(sz_min * sizeof(*out_values)),
+						(sz_max * sizeof(*out_values)),
+						&sz);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
 
-	while (sz--) {
+	if (!sz_max)
+		sz = sz_min;
+	else
+		sz /= sizeof(*out_values);
+
+	count = sz;
+	while (count--) {
 		*out_values++ = of_read_number(val, 2);
 		val += 2;
 	}
-	return 0;
+
+	return sz;
 }
-EXPORT_SYMBOL_GPL(of_property_read_u64_array);
+EXPORT_SYMBOL_GPL(of_property_read_variable_u64_array);
 
 /**
  * of_property_read_string - Find and read a string from a property
diff --git a/include/linux/of.h b/include/linux/of.h
index 3d9ff8e..299aeb1 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -291,20 +291,24 @@ extern int of_property_count_elems_of_size(const struct device_node *np,
 extern int of_property_read_u32_index(const struct device_node *np,
 				       const char *propname,
 				       u32 index, u32 *out_value);
-extern int of_property_read_u8_array(const struct device_node *np,
-			const char *propname, u8 *out_values, size_t sz);
-extern int of_property_read_u16_array(const struct device_node *np,
-			const char *propname, u16 *out_values, size_t sz);
-extern int of_property_read_u32_array(const struct device_node *np,
-				      const char *propname,
-				      u32 *out_values,
-				      size_t sz);
+extern int of_property_read_variable_u8_array(const struct device_node *np,
+					const char *propname, u8 *out_values,
+					size_t sz_min, size_t sz_max);
+extern int of_property_read_variable_u16_array(const struct device_node *np,
+					const char *propname, u16 *out_values,
+					size_t sz_min, size_t sz_max);
+extern int of_property_read_variable_u32_array(const struct device_node *np,
+					const char *propname,
+					u32 *out_values,
+					size_t sz_min,
+					size_t sz_max);
 extern int of_property_read_u64(const struct device_node *np,
 				const char *propname, u64 *out_value);
-extern int of_property_read_u64_array(const struct device_node *np,
-				      const char *propname,
-				      u64 *out_values,
-				      size_t sz);
+extern int of_property_read_variable_u64_array(const struct device_node *np,
+					const char *propname,
+					u64 *out_values,
+					size_t sz_min,
+					size_t sz_max);
 
 extern int of_property_read_string(const struct device_node *np,
 				   const char *propname,
@@ -380,6 +384,122 @@ extern int of_detach_node(struct device_node *);
 
 #define of_match_ptr(_ptr)	(_ptr)
 
+/**
+ * of_property_read_u8_array - Find and read an array of u8 from a property.
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @out_values:	pointer to return value, modified only if return value is 0.
+ * @sz:		number of array elements to read
+ *
+ * Search for a property in a device node and read 8-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * dts entry of array should be like:
+ *	property = /bits/ 8 <0x50 0x60 0x70>;
+ *
+ * The out_values is modified only if a valid u8 value can be decoded.
+ */
+static inline int of_property_read_u8_array(const struct device_node *np,
+					    const char *propname,
+					    u8 *out_values, size_t sz)
+{
+	int ret = of_property_read_variable_u8_array(np, propname, out_values,
+						     sz, 0);
+	if (ret >= 0)
+		return 0;
+	else
+		return ret;
+}
+
+/**
+ * of_property_read_u16_array - Find and read an array of u16 from a property.
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @out_values:	pointer to return value, modified only if return value is 0.
+ * @sz:		number of array elements to read
+ *
+ * Search for a property in a device node and read 16-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * dts entry of array should be like:
+ *	property = /bits/ 16 <0x5000 0x6000 0x7000>;
+ *
+ * The out_values is modified only if a valid u16 value can be decoded.
+ */
+static inline int of_property_read_u16_array(const struct device_node *np,
+					     const char *propname,
+					     u16 *out_values, size_t sz)
+{
+	int ret = of_property_read_variable_u16_array(np, propname, out_values,
+						      sz, 0);
+	if (ret >= 0)
+		return 0;
+	else
+		return ret;
+}
+
+/**
+ * of_property_read_u32_array - Find and read an array of 32 bit integers
+ * from a property.
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @out_values:	pointer to return value, modified only if return value is 0.
+ * @sz:		number of array elements to read
+ *
+ * Search for a property in a device node and read 32-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_values is modified only if a valid u32 value can be decoded.
+ */
+static inline int of_property_read_u32_array(const struct device_node *np,
+					     const char *propname,
+					     u32 *out_values, size_t sz)
+{
+	int ret = of_property_read_variable_u32_array(np, propname, out_values,
+						      sz, 0);
+	if (ret >= 0)
+		return 0;
+	else
+		return ret;
+}
+
+/**
+ * of_property_read_u64_array - Find and read an array of 64 bit integers
+ * from a property.
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @out_values:	pointer to return value, modified only if return value is 0.
+ * @sz:		number of array elements to read
+ *
+ * Search for a property in a device node and read 64-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_values is modified only if a valid u64 value can be decoded.
+ */
+static inline int of_property_read_u64_array(const struct device_node *np,
+					     const char *propname,
+					     u64 *out_values, size_t sz)
+{
+	int ret = of_property_read_variable_u64_array(np, propname, out_values,
+						      sz, 0);
+	if (ret >= 0)
+		return 0;
+	else
+		return ret;
+}
+
 /*
  * struct property *prop;
  * const __be32 *p;
-- 
1.9.1

[PATCH v2 2/2] of: Add array read functions with min/max size limits

[Richard Fitzgerald]

Add a new set of array reading functions that take a minimum and
maximum size limit and will fail if the property size is not within
the size limits. This makes it more convenient for drivers that
use variable-size DT arrays which must be bounded at both ends -
data must be at least N entries but must not overflow the array
it is being copied into. It is also more efficient than making this
functionality out of existing public functions and avoids duplication.

The existing array functions have been left in the API, since there
are a very large number of clients of those functions and their
existing functionality is still useful. This avoids turning a small
API improvement into a major kernel rework.

The old functions have been turned into mininmal static inlines calling
the new functions. The old functions had no upper limit on the actual
size of the dts entry, to preserve this functionality rather than keeping
two near-identical implementations, if the new function is called with
max=0 there is no limit on the size of the dts entry but only the min
number of elements are read.

Signed-off-by: Richard Fitzgerald <rf-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
---
 drivers/of/base.c  | 156 ++++++++++++++++++++++++++++++++++-------------------
 include/linux/of.h | 144 ++++++++++++++++++++++++++++++++++++++++++++-----
 2 files changed, 234 insertions(+), 66 deletions(-)

diff --git a/drivers/of/base.c b/drivers/of/base.c
index b853737..a0bccb5 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1209,108 +1209,145 @@ int of_property_read_u32_index(const struct device_node *np,
 EXPORT_SYMBOL_GPL(of_property_read_u32_index);
 
 /**
- * of_property_read_u8_array - Find and read an array of u8 from a property.
+ * of_property_read_variable_u8_array - Find and read an array of u8 from a
+ * property, with bounds on the minimum and maximum array size.
  *
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
  * @out_values:	pointer to return value, modified only if return value is 0.
- * @sz:		number of array elements to read
+ * @sz_min:	minimum number of array elements to read
+ * @sz_max:	maximum number of array elements to read, if zero there is no
+ *		upper limit on the number of elements in the dts entry but only
+ *		sz_min will be read.
  *
  * Search for a property in a device node and read 8-bit value(s) from
- * it. Returns 0 on success, -EINVAL if the property does not exist,
- * -ENODATA if property does not have a value, and -EOVERFLOW if the
- * property data isn't large enough.
+ * it. Returns number of elements read on success, -EINVAL if the property
+ * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
+ * if the property data is smaller than sz_min or longer than sz_max.
  *
  * dts entry of array should be like:
  *	property = /bits/ 8 <0x50 0x60 0x70>;
  *
  * The out_values is modified only if a valid u8 value can be decoded.
  */
-int of_property_read_u8_array(const struct device_node *np,
-			const char *propname, u8 *out_values, size_t sz)
+int of_property_read_variable_u8_array(const struct device_node *np,
+					const char *propname, u8 *out_values,
+					size_t sz_min, size_t sz_max)
 {
+	size_t sz, count;
 	const u8 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)),
-						0,
-						NULL);
+						(sz_min * sizeof(*out_values)),
+						(sz_max * sizeof(*out_values)),
+						&sz);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
 
-	while (sz--)
+	if (!sz_max)
+		sz = sz_min;
+	else
+		sz /= sizeof(*out_values);
+
+	count = sz;
+	while (count--)
 		*out_values++ = *val++;
-	return 0;
+
+	return sz;
 }
-EXPORT_SYMBOL_GPL(of_property_read_u8_array);
+EXPORT_SYMBOL_GPL(of_property_read_variable_u8_array);
 
 /**
- * of_property_read_u16_array - Find and read an array of u16 from a property.
+ * of_property_read_variable_u16_array - Find and read an array of u16 from a
+ * property, with bounds on the minimum and maximum array size.
  *
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
  * @out_values:	pointer to return value, modified only if return value is 0.
- * @sz:		number of array elements to read
+ * @sz_min:	minimum number of array elements to read
+ * @sz_max:	maximum number of array elements to read, if zero there is no
+ *		upper limit on the number of elements in the dts entry but only
+ *		sz_min will be read.
  *
  * Search for a property in a device node and read 16-bit value(s) from
- * it. Returns 0 on success, -EINVAL if the property does not exist,
- * -ENODATA if property does not have a value, and -EOVERFLOW if the
- * property data isn't large enough.
+ * it. Returns number of elements read on success, -EINVAL if the property
+ * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
+ * if the property data is smaller than sz_min or longer than sz_max.
  *
  * dts entry of array should be like:
  *	property = /bits/ 16 <0x5000 0x6000 0x7000>;
  *
  * The out_values is modified only if a valid u16 value can be decoded.
  */
-int of_property_read_u16_array(const struct device_node *np,
-			const char *propname, u16 *out_values, size_t sz)
+int of_property_read_variable_u16_array(const struct device_node *np,
+					const char *propname, u16 *out_values,
+					size_t sz_min, size_t sz_max)
 {
+	size_t sz, count;
 	const __be16 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)),
-						0,
-						NULL);
+						(sz_min * sizeof(*out_values)),
+						(sz_max * sizeof(*out_values)),
+						&sz);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
 
-	while (sz--)
+	if (!sz_max)
+		sz = sz_min;
+	else
+		sz /= sizeof(*out_values);
+
+	count = sz;
+	while (count--)
 		*out_values++ = be16_to_cpup(val++);
-	return 0;
+
+	return sz;
 }
-EXPORT_SYMBOL_GPL(of_property_read_u16_array);
+EXPORT_SYMBOL_GPL(of_property_read_variable_u16_array);
 
 /**
- * of_property_read_u32_array - Find and read an array of 32 bit integers
- * from a property.
+ * of_property_read_variable_u32_array - Find and read an array of 32 bit
+ * integers from a property, with bounds on the minimum and maximum array size.
  *
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
  * @out_values:	pointer to return value, modified only if return value is 0.
- * @sz:		number of array elements to read
+ * @sz_min:	minimum number of array elements to read
+ * @sz_max:	maximum number of array elements to read, if zero there is no
+ *		upper limit on the number of elements in the dts entry but only
+ *		sz_min will be read.
  *
  * Search for a property in a device node and read 32-bit value(s) from
- * it. Returns 0 on success, -EINVAL if the property does not exist,
- * -ENODATA if property does not have a value, and -EOVERFLOW if the
- * property data isn't large enough.
+ * it. Returns number of elements read on success, -EINVAL if the property
+ * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
+ * if the property data is smaller than sz_min or longer than sz_max.
  *
  * The out_values is modified only if a valid u32 value can be decoded.
  */
-int of_property_read_u32_array(const struct device_node *np,
+int of_property_read_variable_u32_array(const struct device_node *np,
 			       const char *propname, u32 *out_values,
-			       size_t sz)
+			       size_t sz_min, size_t sz_max)
 {
+	size_t sz, count;
 	const __be32 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)),
-						0,
-						NULL);
+						(sz_min * sizeof(*out_values)),
+						(sz_max * sizeof(*out_values)),
+						&sz);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
 
-	while (sz--)
+	if (!sz_max)
+		sz = sz_min;
+	else
+		sz /= sizeof(*out_values);
+
+	count = sz;
+	while (count--)
 		*out_values++ = be32_to_cpup(val++);
-	return 0;
+
+	return sz;
 }
-EXPORT_SYMBOL_GPL(of_property_read_u32_array);
+EXPORT_SYMBOL_GPL(of_property_read_variable_u32_array);
 
 /**
  * of_property_read_u64 - Find and read a 64 bit integer from a property
@@ -1342,40 +1379,51 @@ int of_property_read_u64(const struct device_node *np, const char *propname,
 EXPORT_SYMBOL_GPL(of_property_read_u64);
 
 /**
- * of_property_read_u64_array - Find and read an array of 64 bit integers
- * from a property.
+ * of_property_read_variable_u64_array - Find and read an array of 64 bit
+ * integers from a property, with bounds on the minimum and maximum array size.
  *
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
  * @out_values:	pointer to return value, modified only if return value is 0.
- * @sz:		number of array elements to read
+ * @sz_min:	minimum number of array elements to read
+ * @sz_max:	maximum number of array elements to read, if zero there is no
+ *		upper limit on the number of elements in the dts entry but only
+ *		sz_min will be read.
  *
  * Search for a property in a device node and read 64-bit value(s) from
- * it. Returns 0 on success, -EINVAL if the property does not exist,
- * -ENODATA if property does not have a value, and -EOVERFLOW if the
- * property data isn't large enough.
+ * it. Returns number of elements read on success, -EINVAL if the property
+ * does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
+ * if the property data is smaller than sz_min or longer than sz_max.
  *
  * The out_values is modified only if a valid u64 value can be decoded.
  */
-int of_property_read_u64_array(const struct device_node *np,
+int of_property_read_variable_u64_array(const struct device_node *np,
 			       const char *propname, u64 *out_values,
-			       size_t sz)
+			       size_t sz_min, size_t sz_max)
 {
+	size_t sz, count;
 	const __be32 *val = of_find_property_value_of_size(np, propname,
-						(sz * sizeof(*out_values)),
-						0,
-						NULL);
+						(sz_min * sizeof(*out_values)),
+						(sz_max * sizeof(*out_values)),
+						&sz);
 
 	if (IS_ERR(val))
 		return PTR_ERR(val);
 
-	while (sz--) {
+	if (!sz_max)
+		sz = sz_min;
+	else
+		sz /= sizeof(*out_values);
+
+	count = sz;
+	while (count--) {
 		*out_values++ = of_read_number(val, 2);
 		val += 2;
 	}
-	return 0;
+
+	return sz;
 }
-EXPORT_SYMBOL_GPL(of_property_read_u64_array);
+EXPORT_SYMBOL_GPL(of_property_read_variable_u64_array);
 
 /**
  * of_property_read_string - Find and read a string from a property
diff --git a/include/linux/of.h b/include/linux/of.h
index 3d9ff8e..299aeb1 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -291,20 +291,24 @@ extern int of_property_count_elems_of_size(const struct device_node *np,
 extern int of_property_read_u32_index(const struct device_node *np,
 				       const char *propname,
 				       u32 index, u32 *out_value);
-extern int of_property_read_u8_array(const struct device_node *np,
-			const char *propname, u8 *out_values, size_t sz);
-extern int of_property_read_u16_array(const struct device_node *np,
-			const char *propname, u16 *out_values, size_t sz);
-extern int of_property_read_u32_array(const struct device_node *np,
-				      const char *propname,
-				      u32 *out_values,
-				      size_t sz);
+extern int of_property_read_variable_u8_array(const struct device_node *np,
+					const char *propname, u8 *out_values,
+					size_t sz_min, size_t sz_max);
+extern int of_property_read_variable_u16_array(const struct device_node *np,
+					const char *propname, u16 *out_values,
+					size_t sz_min, size_t sz_max);
+extern int of_property_read_variable_u32_array(const struct device_node *np,
+					const char *propname,
+					u32 *out_values,
+					size_t sz_min,
+					size_t sz_max);
 extern int of_property_read_u64(const struct device_node *np,
 				const char *propname, u64 *out_value);
-extern int of_property_read_u64_array(const struct device_node *np,
-				      const char *propname,
-				      u64 *out_values,
-				      size_t sz);
+extern int of_property_read_variable_u64_array(const struct device_node *np,
+					const char *propname,
+					u64 *out_values,
+					size_t sz_min,
+					size_t sz_max);
 
 extern int of_property_read_string(const struct device_node *np,
 				   const char *propname,
@@ -380,6 +384,122 @@ extern int of_detach_node(struct device_node *);
 
 #define of_match_ptr(_ptr)	(_ptr)
 
+/**
+ * of_property_read_u8_array - Find and read an array of u8 from a property.
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @out_values:	pointer to return value, modified only if return value is 0.
+ * @sz:		number of array elements to read
+ *
+ * Search for a property in a device node and read 8-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * dts entry of array should be like:
+ *	property = /bits/ 8 <0x50 0x60 0x70>;
+ *
+ * The out_values is modified only if a valid u8 value can be decoded.
+ */
+static inline int of_property_read_u8_array(const struct device_node *np,
+					    const char *propname,
+					    u8 *out_values, size_t sz)
+{
+	int ret = of_property_read_variable_u8_array(np, propname, out_values,
+						     sz, 0);
+	if (ret >= 0)
+		return 0;
+	else
+		return ret;
+}
+
+/**
+ * of_property_read_u16_array - Find and read an array of u16 from a property.
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @out_values:	pointer to return value, modified only if return value is 0.
+ * @sz:		number of array elements to read
+ *
+ * Search for a property in a device node and read 16-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * dts entry of array should be like:
+ *	property = /bits/ 16 <0x5000 0x6000 0x7000>;
+ *
+ * The out_values is modified only if a valid u16 value can be decoded.
+ */
+static inline int of_property_read_u16_array(const struct device_node *np,
+					     const char *propname,
+					     u16 *out_values, size_t sz)
+{
+	int ret = of_property_read_variable_u16_array(np, propname, out_values,
+						      sz, 0);
+	if (ret >= 0)
+		return 0;
+	else
+		return ret;
+}
+
+/**
+ * of_property_read_u32_array - Find and read an array of 32 bit integers
+ * from a property.
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @out_values:	pointer to return value, modified only if return value is 0.
+ * @sz:		number of array elements to read
+ *
+ * Search for a property in a device node and read 32-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_values is modified only if a valid u32 value can be decoded.
+ */
+static inline int of_property_read_u32_array(const struct device_node *np,
+					     const char *propname,
+					     u32 *out_values, size_t sz)
+{
+	int ret = of_property_read_variable_u32_array(np, propname, out_values,
+						      sz, 0);
+	if (ret >= 0)
+		return 0;
+	else
+		return ret;
+}
+
+/**
+ * of_property_read_u64_array - Find and read an array of 64 bit integers
+ * from a property.
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @out_values:	pointer to return value, modified only if return value is 0.
+ * @sz:		number of array elements to read
+ *
+ * Search for a property in a device node and read 64-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_values is modified only if a valid u64 value can be decoded.
+ */
+static inline int of_property_read_u64_array(const struct device_node *np,
+					     const char *propname,
+					     u64 *out_values, size_t sz)
+{
+	int ret = of_property_read_variable_u64_array(np, propname, out_values,
+						      sz, 0);
+	if (ret >= 0)
+		return 0;
+	else
+		return ret;
+}
+
 /*
  * struct property *prop;
  * const __be32 *p;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/2] of: Make of_find_property_value_of_size take a length range

[Rob Herring]

On Mon, Sep 12, 2016 at 02:01:28PM +0100, Richard Fitzgerald wrote:
> In preparation for adding variable-length array reads, change
> of_find_property_value_of_size so that it takes an optional
> maximum length. If the maximum is passed as 0, the behaviour is
> unchanged and it will return a property if it's >= the requested
> minimum length. If maximum is non-zero it will only return a
> property whose length is min <= l <= max.
> 
> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> ---
>  drivers/of/base.c | 39 +++++++++++++++++++++++++++++----------
>  1 file changed, 29 insertions(+), 10 deletions(-)

Applied both patches, thanks.

Rob

Re: [PATCH v2 1/2] of: Make of_find_property_value_of_size take a length range

[Rob Herring]

On Mon, Sep 12, 2016 at 02:01:28PM +0100, Richard Fitzgerald wrote:
> In preparation for adding variable-length array reads, change
> of_find_property_value_of_size so that it takes an optional
> maximum length. If the maximum is passed as 0, the behaviour is
> unchanged and it will return a property if it's >= the requested
> minimum length. If maximum is non-zero it will only return a
> property whose length is min <= l <= max.
> 
> Signed-off-by: Richard Fitzgerald <rf-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
> ---
>  drivers/of/base.c | 39 +++++++++++++++++++++++++++++----------
>  1 file changed, 29 insertions(+), 10 deletions(-)

Applied both patches, thanks.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html