* [PATCH v4] dt-bindings: Add jdi lt070me05000 panel bindings
@ 2016-09-08 5:14 ` Vinay Simha BN
0 siblings, 0 replies; 5+ messages in thread
From: Vinay Simha BN @ 2016-09-08 5:14 UTC (permalink / raw)
Cc: Vinay Simha BN, Archit Taneja, John Stultz, Thierry Reding,
Sumit Semwal, David Airlie, Rob Herring, Mark Rutland,
open list:DRM PANEL DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Add documentation for lt070me05000 panel
Cc: Archit Taneja <archit.taneja@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
v2:
* incorporated rob herring and thierry reviews
gpio to gpios, gpio to regulator using fixed regulators
and pwm backlight is removed, since it is controlled by
dcs commands
v3:
* incorporated thierry reviews
- Added gpio polarity details for reset-gpios
- proper naming conventions and sequence wrt panel datasheet
(vddp-supply, iovcc-supply,
enable-gpios, reset-gpios, dcdc-en-gpios)
v4:
* pinctrl-names, pinctrl-0 removed, not required for
reset-gpios
---
.../bindings/display/panel/jdi,lt070me05000.txt | 31 ++++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
new file mode 100644
index 0000000..4989c91d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
@@ -0,0 +1,31 @@
+JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+Required properties:
+- compatible: should be "jdi,lt070me05000"
+- vddp-supply: phandle of the regulator that provides the supply voltage
+ Power IC supply (3-5V)
+- iovcc-supply: phandle of the regulator that provides the supply voltage
+ IOVCC , power supply for LCM (1.8V)
+- enable-gpios: phandle of gpio for enable line
+ LED_EN, LED backlight enable, High active
+- reset-gpios: phandle of gpio for reset line
+ This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+ XRES, Reset, Low active
+- dcdc-en-gpios: phandle of the gpio for power ic line
+ Power IC supply enable, High active
+
+Example:
+
+ dsi0: qcom,mdss_dsi@4700000 {
+ panel@0 {
+ compatible = "jdi,lt070me05000";
+ reg = <0>;
+
+ vddp-supply = <&pm8921_l17>;
+ iovcc-supply = <&pm8921_lvs7>;
+
+ enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+ dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.1.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v4] dt-bindings: Add jdi lt070me05000 panel bindings
@ 2016-09-08 5:14 ` Vinay Simha BN
0 siblings, 0 replies; 5+ messages in thread
From: Vinay Simha BN @ 2016-09-08 5:14 UTC (permalink / raw)
Cc: Vinay Simha BN, Archit Taneja, John Stultz, Thierry Reding,
Sumit Semwal, David Airlie, Rob Herring, Mark Rutland,
open list:DRM PANEL DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Add documentation for lt070me05000 panel
Cc: Archit Taneja <archit.taneja-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: John Stultz <john.stultz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Sumit Semwal <sumit.semwal-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Vinay Simha BN <simhavcs-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
v2:
* incorporated rob herring and thierry reviews
gpio to gpios, gpio to regulator using fixed regulators
and pwm backlight is removed, since it is controlled by
dcs commands
v3:
* incorporated thierry reviews
- Added gpio polarity details for reset-gpios
- proper naming conventions and sequence wrt panel datasheet
(vddp-supply, iovcc-supply,
enable-gpios, reset-gpios, dcdc-en-gpios)
v4:
* pinctrl-names, pinctrl-0 removed, not required for
reset-gpios
---
.../bindings/display/panel/jdi,lt070me05000.txt | 31 ++++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
new file mode 100644
index 0000000..4989c91d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
@@ -0,0 +1,31 @@
+JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+Required properties:
+- compatible: should be "jdi,lt070me05000"
+- vddp-supply: phandle of the regulator that provides the supply voltage
+ Power IC supply (3-5V)
+- iovcc-supply: phandle of the regulator that provides the supply voltage
+ IOVCC , power supply for LCM (1.8V)
+- enable-gpios: phandle of gpio for enable line
+ LED_EN, LED backlight enable, High active
+- reset-gpios: phandle of gpio for reset line
+ This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+ XRES, Reset, Low active
+- dcdc-en-gpios: phandle of the gpio for power ic line
+ Power IC supply enable, High active
+
+Example:
+
+ dsi0: qcom,mdss_dsi@4700000 {
+ panel@0 {
+ compatible = "jdi,lt070me05000";
+ reg = <0>;
+
+ vddp-supply = <&pm8921_l17>;
+ iovcc-supply = <&pm8921_lvs7>;
+
+ enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+ dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v4] dt-bindings: Add jdi lt070me05000 panel bindings
2016-09-08 5:14 ` Vinay Simha BN
(?)
@ 2016-09-15 14:45 ` Vinay Simha
-1 siblings, 0 replies; 5+ messages in thread
From: Vinay Simha @ 2016-09-15 14:45 UTC (permalink / raw)
To: Vinay Simha BN, Thierry Reding
Cc: Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, open list:DRM PANEL DRIVERS, Rob Herring,
Archit Taneja
[-- Attachment #1.1: Type: text/plain, Size: 2843 bytes --]
Hi Tierry,
Could you please review the patch and integrate?
On Thu, Sep 8, 2016 at 10:44 AM, Vinay Simha BN <simhavcs@gmail.com> wrote:
> Add documentation for lt070me05000 panel
>
> Cc: Archit Taneja <archit.taneja@gmail.com>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sumit Semwal <sumit.semwal@linaro.org>
> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
> Acked-by: Rob Herring <robh@kernel.org>
>
> ---
> v2:
> * incorporated rob herring and thierry reviews
> gpio to gpios, gpio to regulator using fixed regulators
> and pwm backlight is removed, since it is controlled by
> dcs commands
>
> v3:
> * incorporated thierry reviews
> - Added gpio polarity details for reset-gpios
> - proper naming conventions and sequence wrt panel datasheet
> (vddp-supply, iovcc-supply,
> enable-gpios, reset-gpios, dcdc-en-gpios)
> v4:
> * pinctrl-names, pinctrl-0 removed, not required for
> reset-gpios
> ---
> .../bindings/display/panel/jdi,lt070me05000.txt | 31
> ++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,
> lt070me05000.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> new file mode 100644
> index 0000000..4989c91d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> @@ -0,0 +1,31 @@
> +JDI model LT070ME05000 1200x1920 7" DSI Panel
> +
> +Required properties:
> +- compatible: should be "jdi,lt070me05000"
> +- vddp-supply: phandle of the regulator that provides the supply voltage
> + Power IC supply (3-5V)
> +- iovcc-supply: phandle of the regulator that provides the supply voltage
> + IOVCC , power supply for LCM (1.8V)
> +- enable-gpios: phandle of gpio for enable line
> + LED_EN, LED backlight enable, High active
> +- reset-gpios: phandle of gpio for reset line
> + This should be 8mA, gpio can be configured using mux, pinctrl,
> pinctrl-names
> + XRES, Reset, Low active
> +- dcdc-en-gpios: phandle of the gpio for power ic line
> + Power IC supply enable, High active
> +
> +Example:
> +
> + dsi0: qcom,mdss_dsi@4700000 {
> + panel@0 {
> + compatible = "jdi,lt070me05000";
> + reg = <0>;
> +
> + vddp-supply = <&pm8921_l17>;
> + iovcc-supply = <&pm8921_lvs7>;
> +
> + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
> + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
> + };
> + };
> --
> 2.1.2
>
>
--
regards,
vinaysimha
[-- Attachment #1.2: Type: text/html, Size: 4117 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v4] dt-bindings: Add jdi lt070me05000 panel bindings
@ 2016-09-16 15:31 ` Thierry Reding
0 siblings, 0 replies; 5+ messages in thread
From: Thierry Reding @ 2016-09-16 15:31 UTC (permalink / raw)
To: Vinay Simha BN
Cc: Archit Taneja, John Stultz, Sumit Semwal, David Airlie,
Rob Herring, Mark Rutland, open list:DRM PANEL DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
[-- Attachment #1: Type: text/plain, Size: 1225 bytes --]
On Thu, Sep 08, 2016 at 10:44:22AM +0530, Vinay Simha BN wrote:
> Add documentation for lt070me05000 panel
>
> Cc: Archit Taneja <archit.taneja@gmail.com>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sumit Semwal <sumit.semwal@linaro.org>
> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
> Acked-by: Rob Herring <robh@kernel.org>
>
> ---
> v2:
> * incorporated rob herring and thierry reviews
> gpio to gpios, gpio to regulator using fixed regulators
> and pwm backlight is removed, since it is controlled by
> dcs commands
>
> v3:
> * incorporated thierry reviews
> - Added gpio polarity details for reset-gpios
> - proper naming conventions and sequence wrt panel datasheet
> (vddp-supply, iovcc-supply,
> enable-gpios, reset-gpios, dcdc-en-gpios)
> v4:
> * pinctrl-names, pinctrl-0 removed, not required for
> reset-gpios
> ---
> .../bindings/display/panel/jdi,lt070me05000.txt | 31 ++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
Applied, with a modified commit message.
Thanks,
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v4] dt-bindings: Add jdi lt070me05000 panel bindings
@ 2016-09-16 15:31 ` Thierry Reding
0 siblings, 0 replies; 5+ messages in thread
From: Thierry Reding @ 2016-09-16 15:31 UTC (permalink / raw)
To: Vinay Simha BN
Cc: Archit Taneja, John Stultz, Sumit Semwal, David Airlie,
Rob Herring, Mark Rutland, open list:DRM PANEL DRIVERS,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
[-- Attachment #1: Type: text/plain, Size: 1402 bytes --]
On Thu, Sep 08, 2016 at 10:44:22AM +0530, Vinay Simha BN wrote:
> Add documentation for lt070me05000 panel
>
> Cc: Archit Taneja <archit.taneja-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: John Stultz <john.stultz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Sumit Semwal <sumit.semwal-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Vinay Simha BN <simhavcs-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>
> ---
> v2:
> * incorporated rob herring and thierry reviews
> gpio to gpios, gpio to regulator using fixed regulators
> and pwm backlight is removed, since it is controlled by
> dcs commands
>
> v3:
> * incorporated thierry reviews
> - Added gpio polarity details for reset-gpios
> - proper naming conventions and sequence wrt panel datasheet
> (vddp-supply, iovcc-supply,
> enable-gpios, reset-gpios, dcdc-en-gpios)
> v4:
> * pinctrl-names, pinctrl-0 removed, not required for
> reset-gpios
> ---
> .../bindings/display/panel/jdi,lt070me05000.txt | 31 ++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
Applied, with a modified commit message.
Thanks,
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-09-16 15:32 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-08 5:14 [PATCH v4] dt-bindings: Add jdi lt070me05000 panel bindings Vinay Simha BN
2016-09-08 5:14 ` Vinay Simha BN
2016-09-15 14:45 ` Vinay Simha
2016-09-16 15:31 ` Thierry Reding
2016-09-16 15:31 ` Thierry Reding
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.