* [PATCH] arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
@ 2016-09-19 13:31 ` Eric Anholt
0 siblings, 0 replies; 4+ messages in thread
From: Eric Anholt @ 2016-09-19 13:31 UTC (permalink / raw)
To: Florian Fainelli
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stephen Warren,
Lee Jones, bcm-kernel-feedback-list, Catalin Marinas,
Will Deacon, Arnd Bergmann, Eric Anholt
Most of the drivers are included as modules, except for serial (needed
for early console), WDT (required for reboot), and the dependency
chain of RASPBERRYPI_POWER (which is currently not buildable as a
module, but should be changed).
Signed-off-by: Eric Anholt <eric@anholt.net>
---
arch/arm64/configs/defconfig | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index fb8d84516e92..9748c4735a60 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -34,6 +34,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_BCM2835=y
CONFIG_ARCH_BCM_IPROC=y
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_EXYNOS=y
@@ -193,6 +194,7 @@ CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
+CONFIG_BRCMFMAC=m
CONFIG_WL18XX=m
CONFIG_WLCORE_SDIO=m
CONFIG_INPUT_EVDEV=y
@@ -205,6 +207,9 @@ CONFIG_SERIO_AMBAKMI=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_8250_UNIPHIER=y
@@ -228,6 +233,7 @@ CONFIG_VIRTIO_CONSOLE=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_BCM2835=m
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_IMX=y
CONFIG_I2C_MESON=y
@@ -238,6 +244,8 @@ CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_RCAR=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SPI=y
+CONFIG_SPI_BCM2835=m
+CONFIG_SPI_BCM2835AUX=m
CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
@@ -272,6 +280,7 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_EXYNOS_THERMAL=y
CONFIG_WATCHDOG=y
+CONFIG_BCM2835_WDT=y
CONFIG_RENESAS_WDT=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MESON_GXBB_WATCHDOG=m
@@ -294,6 +303,7 @@ CONFIG_REGULATOR_S2MPS11=y
CONFIG_DRM=m
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_TEGRA=m
+CONFIG_DRM_VC4=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_HISI_KIRIN=m
@@ -308,6 +318,7 @@ CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
+CONFIG_SND_BCM2835_SOC_I2S=m
CONFIG_SND_SOC_RCAR=y
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SOC_AK4613=y
@@ -372,6 +383,7 @@ CONFIG_RTC_DRV_XGENE=y
CONFIG_RTC_DRV_S3C=y
CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y
+CONFIG_DMA_BCM2835=m
CONFIG_TEGRA20_APB_DMA=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_HIDMA_MGMT=y
@@ -394,8 +406,10 @@ CONFIG_MSM_MMCC_8996=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_MAILBOX=y
CONFIG_ARM_MHU=y
+CONFIG_BCM2835_MBOX=y
CONFIG_HI6220_MBOX=y
CONFIG_ARM_SMMU=y
+CONFIG_RASPBERRYPI_POWER=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y
@@ -403,6 +417,7 @@ CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_PWM=y
+CONFIG_PWM_BCM2835=m
CONFIG_PWM_TEGRA=m
CONFIG_COMMON_RESET_HI6220=y
CONFIG_PHY_RCAR_GEN3_USB2=y
@@ -414,6 +429,7 @@ CONFIG_ACPI=y
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_PWM_SAMSUNG=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
--
2.9.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
@ 2016-09-19 13:31 ` Eric Anholt
0 siblings, 0 replies; 4+ messages in thread
From: Eric Anholt @ 2016-09-19 13:31 UTC (permalink / raw)
To: linux-arm-kernel
Most of the drivers are included as modules, except for serial (needed
for early console), WDT (required for reboot), and the dependency
chain of RASPBERRYPI_POWER (which is currently not buildable as a
module, but should be changed).
Signed-off-by: Eric Anholt <eric@anholt.net>
---
arch/arm64/configs/defconfig | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index fb8d84516e92..9748c4735a60 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -34,6 +34,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_BCM2835=y
CONFIG_ARCH_BCM_IPROC=y
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_EXYNOS=y
@@ -193,6 +194,7 @@ CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
+CONFIG_BRCMFMAC=m
CONFIG_WL18XX=m
CONFIG_WLCORE_SDIO=m
CONFIG_INPUT_EVDEV=y
@@ -205,6 +207,9 @@ CONFIG_SERIO_AMBAKMI=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_8250_UNIPHIER=y
@@ -228,6 +233,7 @@ CONFIG_VIRTIO_CONSOLE=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_BCM2835=m
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_IMX=y
CONFIG_I2C_MESON=y
@@ -238,6 +244,8 @@ CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_RCAR=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SPI=y
+CONFIG_SPI_BCM2835=m
+CONFIG_SPI_BCM2835AUX=m
CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
@@ -272,6 +280,7 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_EXYNOS_THERMAL=y
CONFIG_WATCHDOG=y
+CONFIG_BCM2835_WDT=y
CONFIG_RENESAS_WDT=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MESON_GXBB_WATCHDOG=m
@@ -294,6 +303,7 @@ CONFIG_REGULATOR_S2MPS11=y
CONFIG_DRM=m
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_TEGRA=m
+CONFIG_DRM_VC4=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_HISI_KIRIN=m
@@ -308,6 +318,7 @@ CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
+CONFIG_SND_BCM2835_SOC_I2S=m
CONFIG_SND_SOC_RCAR=y
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SOC_AK4613=y
@@ -372,6 +383,7 @@ CONFIG_RTC_DRV_XGENE=y
CONFIG_RTC_DRV_S3C=y
CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y
+CONFIG_DMA_BCM2835=m
CONFIG_TEGRA20_APB_DMA=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_HIDMA_MGMT=y
@@ -394,8 +406,10 @@ CONFIG_MSM_MMCC_8996=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_MAILBOX=y
CONFIG_ARM_MHU=y
+CONFIG_BCM2835_MBOX=y
CONFIG_HI6220_MBOX=y
CONFIG_ARM_SMMU=y
+CONFIG_RASPBERRYPI_POWER=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y
@@ -403,6 +417,7 @@ CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_PWM=y
+CONFIG_PWM_BCM2835=m
CONFIG_PWM_TEGRA=m
CONFIG_COMMON_RESET_HI6220=y
CONFIG_PHY_RCAR_GEN3_USB2=y
@@ -414,6 +429,7 @@ CONFIG_ACPI=y
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_PWM_SAMSUNG=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
--
2.9.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
2016-09-19 13:31 ` Eric Anholt
@ 2016-09-21 19:39 ` Florian Fainelli
-1 siblings, 0 replies; 4+ messages in thread
From: Florian Fainelli @ 2016-09-21 19:39 UTC (permalink / raw)
To: Eric Anholt, Florian Fainelli
Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stephen Warren,
Lee Jones, bcm-kernel-feedback-list, Catalin Marinas,
Will Deacon, Arnd Bergmann
On 09/19/2016 06:31 AM, Eric Anholt wrote:
> Most of the drivers are included as modules, except for serial (needed
> for early console), WDT (required for reboot), and the dependency
> chain of RASPBERRYPI_POWER (which is currently not buildable as a
> module, but should be changed).
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
LGTM, can you queue this for the next ARM/ARM64 SoC pull request in a
separate branch for me to pull from?
Thanks!
> ---
> arch/arm64/configs/defconfig | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index fb8d84516e92..9748c4735a60 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -34,6 +34,7 @@ CONFIG_MODULE_UNLOAD=y
> # CONFIG_IOSCHED_DEADLINE is not set
> CONFIG_ARCH_SUNXI=y
> CONFIG_ARCH_ALPINE=y
> +CONFIG_ARCH_BCM2835=y
> CONFIG_ARCH_BCM_IPROC=y
> CONFIG_ARCH_BERLIN=y
> CONFIG_ARCH_EXYNOS=y
> @@ -193,6 +194,7 @@ CONFIG_USB_NET_SMSC75XX=m
> CONFIG_USB_NET_SMSC95XX=m
> CONFIG_USB_NET_PLUSB=m
> CONFIG_USB_NET_MCS7830=m
> +CONFIG_BRCMFMAC=m
> CONFIG_WL18XX=m
> CONFIG_WLCORE_SDIO=m
> CONFIG_INPUT_EVDEV=y
> @@ -205,6 +207,9 @@ CONFIG_SERIO_AMBAKMI=y
> CONFIG_LEGACY_PTY_COUNT=16
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_8250_EXTENDED=y
> +CONFIG_SERIAL_8250_SHARE_IRQ=y
> +CONFIG_SERIAL_8250_BCM2835AUX=y
> CONFIG_SERIAL_8250_DW=y
> CONFIG_SERIAL_8250_MT6577=y
> CONFIG_SERIAL_8250_UNIPHIER=y
> @@ -228,6 +233,7 @@ CONFIG_VIRTIO_CONSOLE=y
> CONFIG_I2C_CHARDEV=y
> CONFIG_I2C_MUX=y
> CONFIG_I2C_MUX_PCA954x=y
> +CONFIG_I2C_BCM2835=m
> CONFIG_I2C_DESIGNWARE_PLATFORM=y
> CONFIG_I2C_IMX=y
> CONFIG_I2C_MESON=y
> @@ -238,6 +244,8 @@ CONFIG_I2C_UNIPHIER_F=y
> CONFIG_I2C_RCAR=y
> CONFIG_I2C_CROS_EC_TUNNEL=y
> CONFIG_SPI=y
> +CONFIG_SPI_BCM2835=m
> +CONFIG_SPI_BCM2835AUX=m
> CONFIG_SPI_MESON_SPIFC=m
> CONFIG_SPI_ORION=y
> CONFIG_SPI_PL022=y
> @@ -272,6 +280,7 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
> CONFIG_CPU_THERMAL=y
> CONFIG_EXYNOS_THERMAL=y
> CONFIG_WATCHDOG=y
> +CONFIG_BCM2835_WDT=y
> CONFIG_RENESAS_WDT=y
> CONFIG_S3C2410_WATCHDOG=y
> CONFIG_MESON_GXBB_WATCHDOG=m
> @@ -294,6 +303,7 @@ CONFIG_REGULATOR_S2MPS11=y
> CONFIG_DRM=m
> CONFIG_DRM_NOUVEAU=m
> CONFIG_DRM_TEGRA=m
> +CONFIG_DRM_VC4=m
> CONFIG_DRM_PANEL_SIMPLE=m
> CONFIG_DRM_I2C_ADV7511=m
> CONFIG_DRM_HISI_KIRIN=m
> @@ -308,6 +318,7 @@ CONFIG_LOGO=y
> CONFIG_SOUND=y
> CONFIG_SND=y
> CONFIG_SND_SOC=y
> +CONFIG_SND_BCM2835_SOC_I2S=m
> CONFIG_SND_SOC_RCAR=y
> CONFIG_SND_SOC_SAMSUNG=y
> CONFIG_SND_SOC_AK4613=y
> @@ -372,6 +383,7 @@ CONFIG_RTC_DRV_XGENE=y
> CONFIG_RTC_DRV_S3C=y
> CONFIG_DMADEVICES=y
> CONFIG_PL330_DMA=y
> +CONFIG_DMA_BCM2835=m
> CONFIG_TEGRA20_APB_DMA=y
> CONFIG_QCOM_BAM_DMA=y
> CONFIG_QCOM_HIDMA_MGMT=y
> @@ -394,8 +406,10 @@ CONFIG_MSM_MMCC_8996=y
> CONFIG_HWSPINLOCK_QCOM=y
> CONFIG_MAILBOX=y
> CONFIG_ARM_MHU=y
> +CONFIG_BCM2835_MBOX=y
> CONFIG_HI6220_MBOX=y
> CONFIG_ARM_SMMU=y
> +CONFIG_RASPBERRYPI_POWER=y
> CONFIG_QCOM_SMEM=y
> CONFIG_QCOM_SMD=y
> CONFIG_QCOM_SMD_RPM=y
> @@ -403,6 +417,7 @@ CONFIG_ARCH_TEGRA_132_SOC=y
> CONFIG_ARCH_TEGRA_210_SOC=y
> CONFIG_EXTCON_USB_GPIO=y
> CONFIG_PWM=y
> +CONFIG_PWM_BCM2835=m
> CONFIG_PWM_TEGRA=m
> CONFIG_COMMON_RESET_HI6220=y
> CONFIG_PHY_RCAR_GEN3_USB2=y
> @@ -414,6 +429,7 @@ CONFIG_ACPI=y
> CONFIG_IIO=y
> CONFIG_EXYNOS_ADC=y
> CONFIG_PWM_SAMSUNG=y
> +CONFIG_RASPBERRYPI_FIRMWARE=y
> CONFIG_EXT2_FS=y
> CONFIG_EXT3_FS=y
> CONFIG_EXT4_FS_POSIX_ACL=y
>
--
Florian
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
@ 2016-09-21 19:39 ` Florian Fainelli
0 siblings, 0 replies; 4+ messages in thread
From: Florian Fainelli @ 2016-09-21 19:39 UTC (permalink / raw)
To: linux-arm-kernel
On 09/19/2016 06:31 AM, Eric Anholt wrote:
> Most of the drivers are included as modules, except for serial (needed
> for early console), WDT (required for reboot), and the dependency
> chain of RASPBERRYPI_POWER (which is currently not buildable as a
> module, but should be changed).
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
LGTM, can you queue this for the next ARM/ARM64 SoC pull request in a
separate branch for me to pull from?
Thanks!
> ---
> arch/arm64/configs/defconfig | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index fb8d84516e92..9748c4735a60 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -34,6 +34,7 @@ CONFIG_MODULE_UNLOAD=y
> # CONFIG_IOSCHED_DEADLINE is not set
> CONFIG_ARCH_SUNXI=y
> CONFIG_ARCH_ALPINE=y
> +CONFIG_ARCH_BCM2835=y
> CONFIG_ARCH_BCM_IPROC=y
> CONFIG_ARCH_BERLIN=y
> CONFIG_ARCH_EXYNOS=y
> @@ -193,6 +194,7 @@ CONFIG_USB_NET_SMSC75XX=m
> CONFIG_USB_NET_SMSC95XX=m
> CONFIG_USB_NET_PLUSB=m
> CONFIG_USB_NET_MCS7830=m
> +CONFIG_BRCMFMAC=m
> CONFIG_WL18XX=m
> CONFIG_WLCORE_SDIO=m
> CONFIG_INPUT_EVDEV=y
> @@ -205,6 +207,9 @@ CONFIG_SERIO_AMBAKMI=y
> CONFIG_LEGACY_PTY_COUNT=16
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_8250_EXTENDED=y
> +CONFIG_SERIAL_8250_SHARE_IRQ=y
> +CONFIG_SERIAL_8250_BCM2835AUX=y
> CONFIG_SERIAL_8250_DW=y
> CONFIG_SERIAL_8250_MT6577=y
> CONFIG_SERIAL_8250_UNIPHIER=y
> @@ -228,6 +233,7 @@ CONFIG_VIRTIO_CONSOLE=y
> CONFIG_I2C_CHARDEV=y
> CONFIG_I2C_MUX=y
> CONFIG_I2C_MUX_PCA954x=y
> +CONFIG_I2C_BCM2835=m
> CONFIG_I2C_DESIGNWARE_PLATFORM=y
> CONFIG_I2C_IMX=y
> CONFIG_I2C_MESON=y
> @@ -238,6 +244,8 @@ CONFIG_I2C_UNIPHIER_F=y
> CONFIG_I2C_RCAR=y
> CONFIG_I2C_CROS_EC_TUNNEL=y
> CONFIG_SPI=y
> +CONFIG_SPI_BCM2835=m
> +CONFIG_SPI_BCM2835AUX=m
> CONFIG_SPI_MESON_SPIFC=m
> CONFIG_SPI_ORION=y
> CONFIG_SPI_PL022=y
> @@ -272,6 +280,7 @@ CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
> CONFIG_CPU_THERMAL=y
> CONFIG_EXYNOS_THERMAL=y
> CONFIG_WATCHDOG=y
> +CONFIG_BCM2835_WDT=y
> CONFIG_RENESAS_WDT=y
> CONFIG_S3C2410_WATCHDOG=y
> CONFIG_MESON_GXBB_WATCHDOG=m
> @@ -294,6 +303,7 @@ CONFIG_REGULATOR_S2MPS11=y
> CONFIG_DRM=m
> CONFIG_DRM_NOUVEAU=m
> CONFIG_DRM_TEGRA=m
> +CONFIG_DRM_VC4=m
> CONFIG_DRM_PANEL_SIMPLE=m
> CONFIG_DRM_I2C_ADV7511=m
> CONFIG_DRM_HISI_KIRIN=m
> @@ -308,6 +318,7 @@ CONFIG_LOGO=y
> CONFIG_SOUND=y
> CONFIG_SND=y
> CONFIG_SND_SOC=y
> +CONFIG_SND_BCM2835_SOC_I2S=m
> CONFIG_SND_SOC_RCAR=y
> CONFIG_SND_SOC_SAMSUNG=y
> CONFIG_SND_SOC_AK4613=y
> @@ -372,6 +383,7 @@ CONFIG_RTC_DRV_XGENE=y
> CONFIG_RTC_DRV_S3C=y
> CONFIG_DMADEVICES=y
> CONFIG_PL330_DMA=y
> +CONFIG_DMA_BCM2835=m
> CONFIG_TEGRA20_APB_DMA=y
> CONFIG_QCOM_BAM_DMA=y
> CONFIG_QCOM_HIDMA_MGMT=y
> @@ -394,8 +406,10 @@ CONFIG_MSM_MMCC_8996=y
> CONFIG_HWSPINLOCK_QCOM=y
> CONFIG_MAILBOX=y
> CONFIG_ARM_MHU=y
> +CONFIG_BCM2835_MBOX=y
> CONFIG_HI6220_MBOX=y
> CONFIG_ARM_SMMU=y
> +CONFIG_RASPBERRYPI_POWER=y
> CONFIG_QCOM_SMEM=y
> CONFIG_QCOM_SMD=y
> CONFIG_QCOM_SMD_RPM=y
> @@ -403,6 +417,7 @@ CONFIG_ARCH_TEGRA_132_SOC=y
> CONFIG_ARCH_TEGRA_210_SOC=y
> CONFIG_EXTCON_USB_GPIO=y
> CONFIG_PWM=y
> +CONFIG_PWM_BCM2835=m
> CONFIG_PWM_TEGRA=m
> CONFIG_COMMON_RESET_HI6220=y
> CONFIG_PHY_RCAR_GEN3_USB2=y
> @@ -414,6 +429,7 @@ CONFIG_ACPI=y
> CONFIG_IIO=y
> CONFIG_EXYNOS_ADC=y
> CONFIG_PWM_SAMSUNG=y
> +CONFIG_RASPBERRYPI_FIRMWARE=y
> CONFIG_EXT2_FS=y
> CONFIG_EXT3_FS=y
> CONFIG_EXT4_FS_POSIX_ACL=y
>
--
Florian
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-09-21 19:39 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-19 13:31 [PATCH] arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Eric Anholt
2016-09-19 13:31 ` Eric Anholt
2016-09-21 19:39 ` Florian Fainelli
2016-09-21 19:39 ` Florian Fainelli
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.